Motorola L7082 Product specifications

l1gs_us.bk : qkref.fm5 Page 1 Wednesday, August 25, 1999 11:19 AM
Quick Access‡
Quick Reference
Options Menu
English
Quick Reference
l1gs_us.bk : qkref.fm5 Page 2 Wednesday, August 25, 1999 11:19 AM
English
Special Keys
S
Press to turn phone on and off.
O
Press to accept call, setting, option,...
C
Press to reject call, setting, option,...
E
Press to enter the Quick Access features.
$
Press to access the options or phone book
<>
menus.
Press both simultaneously to lock the keypad
on flipless models; also use to scroll left and
right.
ª
Press the top to scroll up and press the
bottom to scroll down.
f
Press to call Voicemail.
Making a Call
Enter CO.
Receiving a Call
Press O or open the flip (only on models with flip
when the ‘Key Answer Only’ feature is set to Off).
Ending a Call
Press O, C or close the flip (models with flip only).
Making an Emergency Call
Enter 911O. The call will be directed to a
central emergency operator.
Quick Access Features
Press E followed by the appropriate key, or press
E, scroll to the feature and press O to select.
Adjust Ringer Volume
Press E followed by the volume button to either
increase or decrease the ringer volume.
Redialing the Last Number Called
1 Press O to display the last number dialed.
2 Press O to call the number.
One-Touch Dialing
Press and hold the appropriate digit key 1 to 9.
Storing Numbers in the Phone Book
Press E2 to store a number on the SIM card.
Recalling a Number from the Phone Book
Press the Smart button (=) and then use the volume
button to scroll to the stored number, or press the
appropriate digit key to skip to a particular letter. To
make the call, either hold down = for 1.5 seconds or
press O.
Dialing Phone Book Numbers
Enter G>O
Stopping a Call Alert
Press the volume button when the phone is ringing or
vibrating. This will stop the alert but not answer the call.
l1gs_us.bk : intro.fm5 Page 1 Wednesday, August 25, 1999 11:19 AM
Introduction
Welcome
Congratulations on your purchase of a phone from Motorola, the world leader in cellular technology. The phones are packed
with features that put you in control and give you unrivaled power, while remaining discreet.
Control
•
Customizable Quick Access Menu E - Place nine of your most
frequently used features in your own personal menu so that they
can be accessed with just two key presses. Icons make each
feature easy to identify.
Discretion
•
•
•
Power
•
Superb battery performance G - Each phone is capable of
several hours conversation or several days standby, but is still
small and light.
! Before you use your phone, please see the ‘Your Battery’
section for important information on charging a new
battery.
VibraCall™ L - In locations where you don’t want your phone
to ring, or which are too noisy to hear your phone ring, your
phone can vibrate to alert you of a call.
Wearable Holster - Wear your phone in a stylish holster on your
belt. It is small enough and light enough to keep with you almost
anywhere.
Stop Call Alert - Press the volume button when the phone is
ringing or vibrating. This will stop the alert but not answer the
call.
Personality™
This cellular telephone incorporates Personality™ . Unique to
Motorola, Personality™ removes the complexity of cellular
communications by guiding you through the features and
presenting you with simple choices every step of the way.
Personality™ also allows you to personalize the way you use your
phone - for example, different ringer tones, a phone book and
network selection preferences - all presented with clarity and
simplicity. In this manual, each of the Personality™ features is
identified with an j symbol to indicate that it is customizable to
meet your requirements.
Introduction
1
English
l1gs_us.bk : intro.fm5 Page 2 Wednesday, August 25, 1999 11:19 AM
Understanding this Manual
Many of your phone options are accessed by a simple menu
system. A full description of the menus and how to move around
them is covered in the next section Menu Navigation. When
the manual describes the use of each menu item, it will be
assumed that you are familiar with the menu system.
Key Presses
Key presses are represented in this manual using symbols so that
you may locate and use the required sequence quickly. A
sequence of key presses may be shown as follows:
$OC
This means that you should press the $ key followed by the
O key and then the C key, in sequence, not
simultaneously.
Entering Information
When you are requested to enter information, such as the
number of the phone you wish to call, this is represented in bold
type. For example:
C - enter the required telephone number.
A - enter your Personal Identification Number.
B - enter your unlock code.
G - enter the Phone Book location number.
English
2
Introduction
Prompts and Messages
Your phone responds to key presses by displaying either easy to
understand prompts that guide you to the next action, or simple
messages confirming that your action is complete. Prompts and
messages are represented in this manual in LCD style, for
example:
Enter PIN or Completed.
Other Symbols
You will find the following symbols used throughout this manual:
AA Note contains additional information which is relevant to
the feature/item.
! A Caution contains important additional information
which is relevant to the efficient and/or safe usage of
your phone.
j This symbol indicates that the feature is a Personality™
feature that can be customized to meet your requirements.
i This symbol indicates a short key sequence for the feature.
l1gs_us.bk : intro.fm5 Page 3 Wednesday, August 25, 1999 11:19 AM
Menu Navigation
A large number of your phone's options are accessed by using
menus which use a common approach for selection, change and
cancellation.
Please read this section carefully before attempting to access a
menu option. When you understand the common approach to
menu navigation and how the menus are shown on the page,
you will be able to access and change options with ease.
Entering the Menus
Two different keys are used to access the menus:
$
enters the Options menu while in standby mode;
enters the In-call menu during a call.
E
enters the Quick Access menu.
Once entered, the menus use the $, ª, <, >, O
and C keys in a common manner to access, select and change
individual options.
Leaving the Menus
To leave any of the menus, you can either press and hold the
C key or repeatedly press the C key. Both of these actions
will return your phone to the standby mode.
i Alternatively, a quicker way to leave the menus is to press
EC.
Menus and Sub-menus
A menu is a simple list of options. Some of these options provide
access to a further list of options called a sub-menu. When
navigating through the menus you may find it is helpful to think
in terms of menu levels - the ‘parent’ menu being on one level
and its sub-menus being on a lower level.
Moving To and Selecting a Menu Option
To move from one option to another on the same level, use the
scroll key ª; press the bottom half to scroll forwards and press
the top half to scroll backwards. When you find the option you
want, press the O key to select it.
Depending on the option you select, one of three things will
happen:
• either a brief message will be displayed confirming an action,
for example Completed.
• or a prompt will be displayed requesting you to enter
information, for example Enter PIN or Enter Name.
• or the first option of a sub-menu will be displayed. You can
select this option using the O key or browse through the
other options using the scroll keys.
To leave an option or sub-menu, press the C key. This will
take you back to the parent menu item.
Menu Options with Security Codes
Some options are protected from misuse by requiring you to
enter one of the security codes. To use these options, you must
enter the requested code before proceeding.
Introduction
3
English
l1gs_us.bk : intro.fm5 Page 4 Wednesday, August 25, 1999 11:19 AM
Menu Navigation - A Working Example
The following steps will take you through how to switch the
Extended Menus option on:
1 When the phone is in the standby mode, press the $ key.
This will access the Options menu and Phone Book will be
displayed.#
2 Press the ª key three times to go to the Phone Setup
menu item.
3 Press the O key to select the sub-menu.
4 Press the ª key repeatedly until the Extended Menus submenu item is shown in the display.
5 Press the O key to select this item. You can now select
between On or Off, the current setting will be shown with a
z character. If the z character is next to Off, press ª and
then O to switch on the Extended Menus. If the z
character is next to On, press C to leave the setting as it is.
# If your service provider has added their own menu, the Phone
Book menu will not be the first item in the Options menu.
† Availability depends on the type and settings of the SIM card,
and/or your subscription to these features.
English
4
Introduction
l1gs_us.bk : intro.fm5 Page 5 Wednesday, August 25, 1999 11:19 AM
j Short, Extended and Personalized Menus
With Personality™ you can personalize the menus by choosing
which features you want readily available. The features that are
less frequently used can be stored out of sight.
The menu diagrams in this manual show the condition of the
menu settings when you first receive your phone. Some features
are in the Short Menu and are shown in bold type. Other
features are in the Extended Menu and appear in italics.
You can change which features appear in the Short and
Extended Menus, and therefore personalize the menus, to suit
your requirements.
If you want to move a feature from the Short Menu to the
Extended Menu (or from the Extended Menu to the Short Menu),
go to the feature and then hold down the O key until a
prompt appears offering the following choices:
• Add the current feature to the Short Menu/Extended Menu.
• Leave the current feature in the Short/Extended Menu.
Select the option you want by pressing the O key.
The settings for some menu features cannot be changed.
Introduction
5
English
l1gs_us.bk : intro.fm5 Page 6 Wednesday, August 25, 1999 11:19 AM
Total Customer Satisfaction
At Motorola, Total Customer Satisfaction is a top priority. If you
have a question, a suggestion or a concern about your Motorola
Cellular Phone, Motorola wants to hear from you.
Please contact the Motorola Cellular Response Center by fax on:
+44 (0) 131 458 6732, or use one of the local phone numbers in
the following countries:
Qatar
418999
Saudi Arabia
01 2303294
South Africa
0800 11 48 49
Spain
902 100 077
Sweden
08 445 1210
Switzerland
0800 553 109
0212 425 9090
Austria
0660 7246
Turkey
Belgium
0800 72 370
UK
0500 55 55 55
Czech Republic
00420 2 21 85 21 01
United Arab Emirates
04 32 11 66
Denmark
4348 8005
Hong Kong
852 25063888
Egypt
02 3411800
People’s Republic of China 86 10 68466060
Eire
01 402 6887
Singapore
65 4855 333
Finland
0800 117 036
Taiwan
886 2 87731746
France
0 803 303 302
United States of America
1 800 331 6456
Germany
0180 35050
Canada
1 800 461 4575
Greece
00800 441 28150
For e-mail questions contact:mcrc@ei.css.mot.com
Italy
02 696 333 16
For Internet questions contact:http://www.mot.com
Jordan
06 863750
Kuwait
484 2000 Ext 1177
Lebanon
01 744156
Luxembourg
0800 21 99
Netherlands
0800 022 27 43
Norway
22 55 10 04
Oman
790925
Portugal
01 318 0051
English
6
Introduction
l1gs_us.bk : toc.fm5 Page 7 Wednesday, August 25, 1999 11:19 AM
Contents
Safety
Important information for the efficient and safe operation of your phone ................................................................................9
About Your Phone, Battery and SIM Card
Introduces your phone, explains how to charge and maintain batteries, explains about your SIM Card...............................15
Making and Receiving Phone Calls
Explains how to make single or conference calls, how to redial, how to transfer a call, and how to end a call....................25
Using The Options Menu
Provides an explanation of the Options Menu and how to use it ..............................................................................................35
Using the Quick Access Menu
Provides an explanation of the Quick Access Menu and how to use it......................................................................................71
Accessories
Details the accessories available for use with your phone..........................................................................................................77
What To Do If...
Helps you to solve any problems that may occur.........................................................................................................................79
Index
A comprehensive Index ..................................................................................................................................................................87
The Manufacturer reserves the right to make changes in technical and product specifications without prior notice.
Contents
7
English
l1gs_us.bk : toc.fm5 Page 8 Wednesday, August 25, 1999 11:19 AM
English
8
Contents
l1gs_us.bk : safety.fm5 Page 9 Wednesday, August 25, 1999 11:19 AM
Safety
Wireless Phone Safety Tips
“Safety is your most important call!”
Your Motorola wireless telephone gives you the powerful ability
to communicate by voice - almost anywhere, anytime, wherever
wireless phone service is available and safe conditions allow. But
an important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
When driving a car, driving is your first responsibility. If you find it
necessary to use your wireless phone while behind the wheel of a
car, practice good common sense and remember the following
tips:
1. Get to know your Motorola wireless phone and its features
such as speed dial and redial. If available, these features help
you to place your call without taking your attention off the
road.
2. When available, use a hands-free device. If possible, add an
additional layer of convenience to your wireless phone with
one of the many Motorola Original hands-free accessories
available today.
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes from
the road. If you receive an incoming call at an inconvenient
time, if possible, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving; if
necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice, and even heavy
traffic can be hazardous.
5. If you receive an incoming call at an inconvenient time do not
take notes or look up phone numbers while driving. Jotting
down a “ to do” list or going through your address book takes
attention away from your primary responsibility— driving
safely.
6. Dial sensibly and assess the traffic; if possible, place calls when
you are not moving or before pulling into traffic. Try to plan
calls when your car will be stationary. If you need to make a
call while moving, dial only a few numbers, check the road
and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with aware
you are driving and suspend conversations which have the
potential to divert your attention away from the road.
8. Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident or
medical emergencies.1
9. Use your wireless phone to help others in emergencies. If you
see an auto accident, crime in progress or other serious
emergency where lives are in danger, call 9-1-1 or other local
emergency number, as you would want others to do for you.1
10. Call roadside assistance or a special non-emergency wireless
assistance number when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a
minor traffic accident where no one appears injured, or a
vehicle you know to be stolen, call roadside assistance or
other special non-emergency wireless number.1
1.
Wherever wireless phone service is available.
Safety
9
English
l1gs_us.bk : safety.fm5 Page 10 Wednesday, August 25, 1999 11:19 AM
Check the laws and regulations on the use of wireless telephones
and their accessories in the areas where you drive. Always obey
them. The use of these devices may be prohibited or restricted in
certain areas.
For more information, please call 1-888-901-SAFE or visit the
CTIA website at www.wow-com.com ™ .
English
10
Safety
l1gs_us.bk : safety.fm5 Page 11 Wednesday, August 25, 1999 11:19 AM
Hand-Held Portable PCS Telephone
IMPORTANT
Read this information before using
your PCS Telephone
Exposure To Radio Frequency Signals
Your wireless handheld portable telephone is a low power radio
transmitter and receiver. When it is ON, it receives and also sends
out radio frequency (RF) signals.
In August 1996, the Federal Communications Commission (FCC)
adopted RF exposure guidelines with safety levels for hand-held
wireless phones. Those guidelines are consistent with the safety
standards previously set by both U.S. and international standard
bodies:
1
• ANSI C95.1 (1992)
• NCRP Report 86 (1986)1
• ICNIRP (1996)1
These standards are based on comprehensive and periodic
evaluations of relevant scientific literature. For example, over 120
scientists, engineers and physicians from universities, government
health agencies and industry reviewed the available body of
research to develop the updated ANSI Standard (C95.1).
The design of your phone complies with the FCC guidelines (and
these standards).
Antenna Care
Use only the supplied or approved replacement antenna.
Unauthorized antennas, modifications or attachments could
damage the phone and may violate FCC regulations.
Phone Operation
Normal Position: Hold the phone as you would any other
telephone with the antenna pointed up and over your shoulder.
Tips on Efficient Operation: For your phone to operate most
efficiently:
• Extend your antenna fully (if applicable).
• Do not touch the antenna unnecessarily when the phone is in
use. Contact with the antenna affects call quality and may
cause the phone to operate at a higher power level than
otherwise needed.
1. American National Standard Institute: National Council on radiation
Protection and Measurements; International Commission on NonIonizing Radiation Protection
Safety
11
English
l1gs_us.bk : safety.fm5 Page 12 Wednesday, August 25, 1999 11:19 AM
Batteries
! All batteries can cause property damage, injury or burns
if a conductive material such as jewelry, keys or beaded
chains touches exposed terminals. The material may
complete an electrical circuit and become quite hot. To
protect against such unwanted current drain, exercise
care in handling any charged battery, particularly when
placing it inside your pocket, purse or other container
with metal objects. When the battery is detached from
the phone, your batteries are packed with a protective
battery cover; please use this cover for storing your
batteries when not in use.
Persons with pacemakers:
• Should ALWAYS keep the phone more than six inches from
their pacemaker when the phone is turned on.
• Should not carry the phone in a breast pocket.
• Should use the ear opposite the pacemaker to minimize the
potential for interference.
Driving
Check the laws and regulations on the use of wireless telephones
in the areas where you drive. Always obey them. Also, if using
your phone while driving, please:
• give full attention to driving - driving safely is your first
responsibility
• use hands-free operation, if available
• pull off the road and park before making or answering a call if
driving conditions so require.
Electronic Devices
Most modern electronic equipment is shielded from RF signals.
However, certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
English
Pacemakers
The Health Industry Manufacturers Association recommends that
a minimum separation of six (6” ) inches be maintained between
a handheld wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and
recommendations of Wireless Technology Research.
12
Safety
If you have any reason to suspect that interference is taking
place, turn your phone OFF immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference you may want to consult
your hearing aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information.
Turn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do so. Hospitals
or health care facilities may be using equipment that could be
sensitive to external RF energy.
l1gs_us.bk : safety.fm5 Page 13 Wednesday, August 25, 1999 11:19 AM
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted notices so
require.
Aircraft
FCC regulations prohibit using your phone while in the air.
Switch OFF your phone before boarding an aircraft.
Blasting Areas
To avoid interfering with blasting operations, turn your phone
OFF when in a “ blasting area” or in areas posted: “ turn off twoway radio” . Obey all signs and instructions.
Potentially Explosive Atmospheres
Turn your phone OFF and do not remove the battery when in any
area with a potentially explosive atmosphere and obey all signs
and instructions. Sparks, from your battery, in such areas could
cause an explosion or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not
always clearly marked. They include fueling areas such as
gasoline stations; below deck on boats; fuel or chemical transfer
or storage facilities; areas where fuel odors are present, i.e. if a
gas/propane leak occurs in a car or home; areas where the air
contains chemicals or particles, such as grain, dust, or metal
powders; and any other area where you would normally be
advised to turn off your vehicle engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects,
including both installed or portable wireless equipment, in the
area over the air bag or in the air bag deployment area. If invehicle wireless equipment is improperly installed and the air bag
inflates, serious injury could result.
Safety
13
English
l1gs_us.bk : safety.fm5 Page 14 Wednesday, August 25, 1999 11:19 AM
English
14
Safety
l1gs_us.bk : abtphone.fm5 Page 15 Wednesday, August 25, 1999 11:19 AM
About Your Phone, Battery and SIM Card
Special Keys
S
Turns the phone on and off.
O
Accept call, setting, option.
C
Reject call, setting, option.
E
Enter the Quick Access menu.
$
Press to access the Options and Phone Book menus.
<>
Press both simultaneously to lock the keypad on
flipless models; also use to scroll left and right.
ª
Press the top to scroll up and press the bottom to
scroll down.
f
Press to call Voicemail.
AThe shape of the keys that appear in the manual may vary
slightly from those on the phone.
The Flip (if fitted)
Opening the flip answers a call (when the ‘Key
Answer Only’ feature is set to Off, the default
position). Closing the flip ends a call.
The Smart Button
The Smart button (=) is on the left-hand side of
your phone, below the volume button. Press it to
quickly access all your Phone Book entries, and
then either scroll through the entries using the
volume button or press one of the alphanumeric
keys to search for a specific name - for example,
press 7 to search for the name Pam, or press
7 four times to search for the name Sam.
AIf a Phone Book entry does not have a name, it will not be
displayed.
If you are using the optional headset, you can also use the Smart
button to make, answer and end calls as follows:
• To answer a call, press = for 1.5 seconds.
• To end a call, press = for 1.5 seconds and then quickly press
= again.
• To make a call, enter or recall a number and then press and
hold = for 1.5 seconds.
Volume Button
The Volume button (¬) is on the left-hand side of your phone,
above the Smart button. The button is used for adjusting the
keypad, earpiece and ringer volume. A volume meter will display
the current volume setting. The meter will disappear after a short
time, or if you press O or C.
• To adjust the keypad and earpiece volume, press the button
with no other features selected.
• To adjust the ringer volume, first select the ‘Adjust Ring
Volume’ option in the Phone Setup Menu and then use the
button to set the required volume.
The volume button can also be used to scroll though the Phone
Book entries after pressing the Smart button.
AIf you receive a call and you do not want to answer it
immediately, you can press the volume button to stop the
phone from ringing or vibrating. This will not answer the
call.
About Your Phone, Battery and SIM Card
15
English
l1gs_us.bk : abtphone.fm5 Page 16 Wednesday, August 25, 1999 11:19 AM
Mute Button
h
Ringer On. Displayed when the call ringer is
selected. If you select the No Ring or Vibrate or the
Vibrate Only options this symbol will not be
displayed.
q
Battery Charge Indicator. The more segments
displayed, the greater the battery charge.
B...K
Icons are displayed when you are in the Quick
Access menu.
z
Indicates that a menu item is currently selected.
12:00
Real Time Clock. In the idle display, the real time
clock can display the time in either a 12-hour or
24-hour format.
The Mute button is located on the top of the phone, next to the
antenna. Press it to mute the phone during a call.
The Display
The display on your phone can
show alphanumeric characters as
well as useful information
symbols.The various elements of
the display are as follows:
ABC123
Characters are used to display messages and
telephone numbers.
In addition, when you are expected to press the O key, a
prompt will appear in the display, for example Completed.
rx
Signal Strength. The more segments displayed in
the bar graph, the better the signal strength.
k
In Use. Displayed when a call is in progress.
l
Roam. Displayed when you are registered on a
system other than your home system.
Low Temperature Use
The liquid crystal display used in your phone will behave
differently at extremely low temperatures. You may notice that
the display responds slowly to key presses; this is to be expected
and does not affect the phone operation in any way.
n
Home Zone. Availability depends on your service
provider.
o
Short Message Service. Displayed when the
phone has received a message. The symbol will
flash when your message storage area is full.
p
Voicemail Waiting Indicator. Displayed when
you have a voice message waiting. The availability
of this feature depends on your service provider.
English
16
About Your Phone, Battery and SIM Card
l1gs_us.bk : abtphone.fm5 Page 17 Wednesday, August 25, 1999 11:19 AM
Earpiece Connector
The earpiece connector is on the left-hand side of your phone,
above the volume button. Use this connector for the headset
accessories available from your Motorola dealer.
Communicating with External Devices
To communicate with an external device, such as a personal
computer or a fax machine, your phone includes the following
features:
• an infra-red lens located next to the antenna on the top of the
phone.
• an RS-232 serial data port located at the bottom of the phone.
Setting up the Infra-Red Feature
i Press E. Select the Quick Access feature.
Before you can transfer your data:
• Align the infra-red lens on your phone with the infra-red lens
on the external device.
• Make sure that the infra-red feature is active in both the
phone and the external device.
The phone and the external device can be up to 30 cm apart.
Setting up the RS-232 Serial Data Port
The RS-232 serial data port requires a Motorola 3-pin
RS-232 serial data cable. This is available from your Motorola
dealer.
To connect the cable to your external device, please refer to the
manufacturer’s documentation.
Looking After Your Phone
• Never leave your phone or battery in extreme temperatures
(over 60° C, 140° F), for example behind glass in very hot,
direct sunlight.
• To clean your phone, use a moistened or antistatic cloth. Do
not use a dry or electrostatically charged cloth.
The Status Indicator
The status indicator on the top of the phone
provides you with the following information:
Incoming Call
Alternate Red/Green
In Service
Flashing Green
No Service
Flashing Red
Roaming
Flashing Yellow
For operating details, see ‘Activate IR Port’ in the ‘Phone Setup’
section of this manual.
About Your Phone, Battery and SIM Card
17
English
l1gs_us.bk : abtphone.fm5 Page 18 Wednesday, August 25, 1999 11:19 AM
Your Battery
To ensure that you enjoy maximum battery life and use your
battery to its fullest capacity:
Charging a New Battery
• The battery should be at or near room temperature when
charging.
New batteries are supplied in a totally uncharged state.
To ensure maximum battery performance, a new battery (or
battery that has not been used for several months) should be
charged for at least 14 hours before use.
AA new battery will require several full charge/discharge
cycles in order to achieve its optimum performance.
AA new battery, or a battery that has not been used for
several months, may cause a premature fully charged
indication. Ignore this indication and let the battery charge
for several more hours, remove and re-insert the battery
into the charger, and charge for an additional 14 hours.
Important Battery Information
! Always treat your batteries with care. See ‘Batteries’, at
the beginning of this manual.
! Never leave your battery in extremely high
temperatures (over 60° C, 140° F), for example behind
glass in very hot, direct sunlight.
! Only Motorola Original Accessory batteries can be
charged in the phone or the optional desktop charger.
This is to protect you and your phone from the risks of
incorrect charging.
ADo not use lithium ion batteries at extremely low
temperatures as the maximum standby/talk time will not be
available when cold.
English
18
About Your Phone, Battery and SIM Card
Battery Performance and Maintenance
• Best battery performance will be achieved when you regularly
charge and discharge batteries as instructed in this manual.
• Battery performance is greatly affected by network coverage.
• Set Battery Saving Mode to On (see ‘Phone Setup
Menu’) and/or Frequency of Search to Slow or Medium
(see ‘Network Selection Menu’).
• If left unused, a fully charged battery will discharge itself in
approximately one month.
• When not in use, store your battery uncharged in a cool, dark
and dry place.
Low Battery Warning
When the battery level is low and only a few minutes of talk time
remain, a warning signal (two double beeps) will sound, the
border of the battery symbol will begin to flash, and Low
Battery will be displayed.
When the battery is completely discharged, your phone will turn
off.
l1gs_us.bk : abtphone.fm5 Page 19 Wednesday, August 25, 1999 11:19 AM
Removing Your Battery
! Switch off your phone before removing the battery.
Failure to do so may damage your phone memory.
1 Press the release catch on the battery compartment and lift off
the cover.
2 Push the battery towards the top of the phone and lift the
battery out from the bottom end.
Fitting Your Battery
1 Remove the battery compartment cover.
2 Align the connections on the battery with the connections on
the phone.
3 Press the battery towards the connections and push it
downwards until it clicks into place. Replace the cover.
About Your Phone, Battery and SIM Card
19
English
l1gs_us.bk : abtphone.fm5 Page 20 Wednesday, August 25, 1999 11:19 AM
Charging Your Battery Using the Travel
Charger
2 Connect the travel charger to the phone.
AThe connector is keyed and can only be inserted one way.
The travel charger can power the phone and charge a fitted
battery.
! Ensure that the local mains voltage at your location
matches that of your travel charger.
Fit a battery onto your phone.
To charge your battery:
1 Attach the correct adapter plug to the travel charger.
3 Insert the travel charger plug into a suitable mains power
socket.
A beep-tone is heard and the battery icon flashes when charging
begins.
AYour phone can be either on or off during charging.
The state of charging is monitored and displayed by your phone.
See ‘Battery Meter Indicators’ later in this section for details.
English
20
About Your Phone, Battery and SIM Card
l1gs_us.bk : abtphone.fm5 Page 21 Wednesday, August 25, 1999 11:19 AM
Desktop Charging Your Battery
AThe Desktop Charger is an optional accessory that allows
you to charge both the battery fitted in your phone and a
spare battery at the same time.
Batteries charge in about 2 to 3 hours, depending on the battery.
AIt is normal for batteries to become warm during charging.
1 Connect the travel charger to the desktop charger socket.
(The connector is keyed and can only be inserted one way).
A spare battery can be charged on its own or at the same time as
your phone. Insert the battery into the desktop charger as
shown.
AFor maximum NiMH battery charging, you should double
the charge time.
ACharge times will increase if you make or receive phone calls
while charging.
2 Plug the travel charger into a standard mains socket.
3 Insert your phone into the desktop charger as shown.
About Your Phone, Battery and SIM Card
21
English
l1gs_us.bk : abtphone.fm5 Page 22 Wednesday, August 25, 1999 11:19 AM
Battery Indicators
Your Motorola cellular phone includes the Motorola Expert
Performance (¢) charging system. This enables the charging
circuits in both the phone and the optional (¢) desktop
charger to communicate directly with the battery. Based on this
communication, the charger can implement the optimum
charging cycle for best performance and determine the level of
charge.
Your phone monitors and displays information about your
battery. The following message will appear on the display, as the
condition occurs:
Low Battery
The battery charge is low. The battery should
be recharged.
Insert
Battery
No battery fitted; external power connected
Invalid
Battery
This message is accompanied by a single beep.
Your phone is alerting you that you do not
have charging capabilities with this battery
even though the battery may be able to power
the phone.
The most likely reason why your charging
system does not recognize the battery is that
the battery you have purchased is not a
Motorola original battery and therefore does
not have the communications technology built
into it. All Motorola original batteries include
this communications technology.
It is recommended that you use only Motorola
original batteries, chargers and other
accessories.
English
22
About Your Phone, Battery and SIM Card
Battery Meter Indicators
The battery meter displays different messages depending on the
batteries attached, and whether or not there is an external power
source. The battery meter is found in the Call Related Features
part of the Options Menu.
Charging
Battery
The battery is being charged.
Charging
Complete
Charging is complete.
Invalid
Battery
Battery may be defective, or may not be a
Motorola original battery.
AWhen the battery is completely discharged, you must
charge the battery for one minute before you can make or
accept a phone call.
l1gs_us.bk : abtphone.fm5 Page 23 Wednesday, August 25, 1999 11:19 AM
Your SIM Card
Your SIM (Subscriber Identity Module) card was supplied by your
Cellular Service Provider when you bought your phone. You will
not be able to make or receive calls if you do not have a SIM card
inserted in your phone.
ASome networks allow you to make emergency calls without
a SIM card inserted.
SIM Card Insertion/Removal
1 Switch off your phone by pressing and holding the S key,
remove the battery cover and the battery.
2 Slide the SIM cover towards the left and lift up the right side
of the cover.
The SIM card is a ‘Smart Card’ that contains your phone number,
service details and memory for storing Phone Book numbers and
messages. You can therefore use your SIM card in someone else’s
GSM phone and you will be charged for the call.
Like a bank or credit card, you should keep your SIM card secure.
Do not bend or scratch your card and avoid exposure to static
electricity or water.
! Switch off your phone before inserting or removing the
SIM card. Failure to do so may damage the memory on
your SIM card.
3 If necessary, remove the SIM card from the recess in the base
of the phone.
About Your Phone, Battery and SIM Card
23
English
l1gs_us.bk : abtphone.fm5 Page 24 Wednesday, August 25, 1999 11:19 AM
4 Place the SIM card into the recess in the base of the phone so
that the notch is in the bottom right-hand corner.
5 Replace the SIM cover, then press and slide it to the right to
lock it into place.
6 Replace the battery and battery cover.
If the SIM card is inserted the wrong way around, or damaged,
the Check Card message may be displayed. Remove the SIM
card, check that it is the right way around and then re-insert it
into the phone.
If either of the Bad Card See Supplier or Blocked See
Supplier messages are displayed, then you will need to
contact your Cellular Service Provider.
English
24
About Your Phone, Battery and SIM Card
l1gs_us.bk : usephone.fm5 Page 25 Wednesday, August 25, 1999 11:19 AM
Making and Receiving Phone Calls
Switching the Phone On and Off
To switch the phone on or off, press and hold the S key. If
VibraCall™ is selected, the phone will vibrate when it is switched
on.
If you switch the phone on and there is no SIM card inserted, you
will be asked to insert one. Once inserted, the phone will check
that the SIM card is valid.
A number of messages will then be displayed:
• Enter PIN - a request to enter the SIM card PIN code (if
required).
• Enter Phone Unlock Code - a request to enter the phone
unlock code (if required).
• Searching... followed by a network name - as the phone
searches and then finds a suitable network to connect to.
Entering Your SIM Card PIN Code
To enter the PIN code, enter AO.
As you type in each digit of the PIN code a * character will be
displayed.
If you make a mistake, press and release the C key to remove
the last digit. Holding the C key down will remove the entire
entry.
When the PIN code is complete press the O key.
If the PIN code entered is incorrect, the warning message Wrong
PIN will be displayed, followed by Enter PIN.
! If the PIN number is entered incorrectly three times in a
row, your phone will automatically lock-up and the
Blocked message will be displayed. See ‘Unblocking
Your Phone’ for details on unblocking your phone.
The PIN code can be changed, see ‘Change SIM PIN Code’ in the
Phone Setup Menu section for more details.
j Entering Your Unlock Code
If your phone displays the message Enter Phone Unlock
Code you must enter your unlocking code by entering
BO.
The unlock code is a four digit number which is set at
manufacture to 1234. The code can be changed, see ‘Change
Unlock Code’ in the Phone Setup Menu section for more
details.
If you forget your unlock code, press the $ key. This will
display the ‘Change Unlock Code’ option. Enter O
D, enter a new unlock code, and press O.
Locking the Keypad
Press the < and > keys simultaneously to prevent
accidental usage of the phone. To remove the lock, press <
and > simultaneously. All keys with the exception of the S
key will be disabled. You can still answer an incoming call by
pressing O when the keypad is locked.
Making and Receiving Phone Calls
25
English
l1gs_us.bk : usephone.fm5 Page 26 Wednesday, August 25, 1999 11:19 AM
Making a Phone Call
To make a phone call, your phone must be switched on and
unlocked.
The simplest method of making a phone call is to enter the
number using the digit keys then press O.
It will not be possible to make a phone call unless you are in an
area where there is a GSM 1900 service. When a service has been
found, a series of rising bars, x, will show the signal
strength.
AIf you make a mistake, press and release the C key to
remove the last digit. Holding the C key down will
remove the entire number.
There are a number of different ways to make a phone call:
• Using the digit keys.
• Using automatic redial.
• Redialing the last number called.
• One-touch dialing a Phone Book entry*.
• Dialing a Phone Book entry*.
• Calling an embedded number in a message.
• Using the Smart button (=).
A*Your phone contains a 'phone book' that can be used to
store names and telephone numbers. See ‘What is the
Phone Book?’ for further details.
Your phone will then attempt to make the phone call. The display
will show Calling to show the call attempt is being made. If
the call is not answered, pressing O, or closing the flip (models
with flip only), at this point will end the attempt.
When the phone call is answered, the display will change to
Connected for a few seconds, followed by End Call?.
To end your call press O, or close the phone.
Automatic Redial
If your call attempt does not succeed, the message Redial? will
be displayed for five seconds. Pressing O at this point will
automatically redial the phone number.
When the call is answered, you will hear a short ring tone.
The maximum number of redial attempts is set by your Cellular
Service Provider. If the phone call cannot be connected within
this maximum, the message Redial Failed will be shown.
Redialing the Last Number Called
i When in standby mode, press OO.
Alternatively, you can retrieve the last number dialed using the
‘Last Ten Calls’ feature in the Phone Book menu.
English
26
Making and Receiving Phone Calls
l1gs_us.bk : usephone.fm5 Page 27 Wednesday, August 25, 1999 11:19 AM
j One-Touch Dialing Phone Book Numbers
To quickly retrieve and dial a number stored in the first nine
locations of your Phone Book1, press and hold the appropriate
digit key. For example, pressing and holding 2 will dial the
phone number stored in location 2 of your Phone Book.
AYou do not need to press O to call the number.
j Dialing Phone Book Numbers
• Press = and use the volume button to scroll to the stored
number, or press the appropriate digit key to skip to a
particular letter. To make the call, either hold down = for 1.5
seconds or press O.
Alternatively, enter the phone book G number followed
by >O.
Calling an Embedded Number in a Message
Details on how to call a number embedded in a message are
given in the Messages Menu section.
International Phone Calls
To make an international phone call press and hold the 0 key.
After a couple of seconds the international dialing prefix + will
appear in the display, this allows you to call from any country
without knowing the local international access code.
Now enter the country code, followed by the phone number. The
country code follows the conventional format, 49 for Germany,
44 for the UK, 46 for Sweden, etc.
Just like a conventional international call, remove the leading '0'
of the area code when you dial.
Inserting Pauses Into Phone Numbers
To obtain a three second 'pause' character in a phone number,
press and hold the < key for a couple of seconds, the pause
symbol Ü will appear.
The pause character produces a three second delay whenever it is
used. However, the first pause character in a phone number is a
special case, it will not begin its delay until the call is answered.
Pause - A Working Example.
If, for example, you have a tone-based voicemail system on
555-6911, with a mailbox number 1066 and password 2001.
Then you may dial the following number:
5556911Ü1066Ü2001O.
The first part of the number would be used to call the voicemail
system.
When the call is answered the first pause will produce a delay of
three seconds before the tones for 1066 are sent to select the
mailbox.
1. The Phone Book entries that you are able to access will
depend on the One-Touch Dial Setting option in the Phone
Book menu.
There will be a second pause of three seconds before the tones
for 2001 are sent as the password.
Making and Receiving Phone Calls
27
English
l1gs_us.bk : usephone.fm5 Page 28 Wednesday, August 25, 1999 11:19 AM
Emergency Calls
When you dial 911, your phone will automatically send an
emergency message to your GSM 1900 network. Keep in mind
that you must be within a GSM 1900 network coverage area. If
allowed by the Service Provider, the emergency mesage can be
sent with or without a SIM card inserted into the phone and
regardless of any security code settings.
Please check with your network operator for further information
regarding emergency dialing services.
To dial the emergency number, press 911O.
While the emergency call is being made and connected, the
display will show Emergency
AYou may also be able to dial 112, the international
emergency number, to place emergency calls.
English
28
Making and Receiving Phone Calls
l1gs_us.bk : usephone.fm5 Page 29 Wednesday, August 25, 1999 11:19 AM
Receiving a Phone Call
To receive a phone call:
• Your phone must be switched on and unlocked.
• You must be in an area where there is GSM 1900 service.
• Your Call Forwarding and Call Barring settings should not be
set to forward or bar incoming calls.
When your phone receives a call, it will ring or vibrate and the
display will show the Call message (if you have Caller Line
Identification, the caller’s number or name will be displayed
instead).
To answer the call, press O or open the flip (only on models
with a flip when the ‘Key Answer Only’ feature is set to Off).
When the identification is displayed, you can decide whether or
not to answer the call by pressing O, a numeric key (1 to
9), < or >. To set this option, see ‘Key Answer Only’.
You can also answer using the keys if the phone rings while the
phone is already open.
If you do not wish to answer a call, you can either:
Press and release the C key. If you have enabled the
'Detailed Forwarding - If Busy' or ‘Forward when unavailable’
options in the Options Menu, the caller will be forwarded to
the forwarding number, otherwise the caller will hear the busy
tone.
or
Press and hold the C key. This will reject the incoming call.
No call forward option will be offered.
If your phone rings and you do not answer it, the message
Unanswered Call will be displayed to show you that a call
attempt was received.
Ending a Phone Call
To end a phone call, press O, C or close phone.
Making and Receiving Phone Calls
29
English
l1gs_us.bk : usephone.fm5 Page 30 Wednesday, August 25, 1999 11:19 AM
In-Call Menu
The “ In-Call” menu provides access to additional functionality
during a call.
Entering the In-Call Menu
The “ In-Call” menu is accessed by pressing the $ key during a
call.
Leaving the In-Call Menu
To leave the “ In-Call” menu press the C key.
In-Call Menu Options
The options listed in the “ In-Call” menu will dynamically change
depending on the current call state. The following list contains all
of the possible options in the “ In-Call” menu.
AOnly some of the options will appear at any given time. The
order of the options may vary.
Handsfree On/Off
This option is used to switch between Handsfree and normal
operation if the phone is installed in a car kit that does not have
an automatic presence detector.
Hold Call
This option will put the active call on hold.
Make a New Call
This option allows you to make another call.
Restrict My Number
This option allows you to make a call without the remote user
getting advanced warning of the number.
End Active Call
This option terminates the active call, and makes the call that was
previously on hold, the active call.
English
30
Making and Receiving Phone Calls
l1gs_us.bk : usephone.fm5 Page 31 Wednesday, August 25, 1999 11:19 AM
End Held Call
This option will terminate a held call.
End Current And Held Call
This option will terminate all connected calls.
Switch Calls
This option allows you to switch between the active call and the
call that is on hold.
Conference Call
This option connects you with up to five other telephones on one
call (see ‘Making a Conference Call’).
Transfer Call
This option transfers a call to another telephone (see ‘Transfer
Call’ later in this section).
Split Call
This option allows you to separate an individual from the main
Conference Call.
Reject Waiting Call
This option will reject a waiting call.
Reconnect
This option will make the call on hold the active call.
Reconnect Held Call
This option is similar to Reconnect but will appear if you have a
call on hold, and a call waiting. Reconnect Held Call will
make the call on hold the active call.
Turn Mute On or Off
Temporarily turns the microphone off during a phone call.
Reselect this option to resume your conversation.
j Call
Holding and Call Waiting
Your phone supports the GSM options of Call Holding and Call
Waiting. Using these options you can place a current phone call
on hold and accept an incoming call or start a second call (See
‘Call Waiting’ in the ‘Call Related Features’ menu for details
of how to control this feature).
Call Holding and Call Waiting Scenarios
The display will automatically change according to the status of
your current call (or calls) and will propose the option that you
are most likely to want. Press O to accept this option or press
$and then ª to scroll through the “ In-Call” menu for the
alternative options. By following this procedure you will find that
even the triple combination of an active call, a held call, and a call
waiting is easy to manage.
The following points summarize the more common situations:
• To put an active call on hold, press $, the display will show
Hold Call Select? - press O to put the call on hold. To
reconnect the call, press O.
• To put an active call on hold and make another call, first put
the active call on hold, then press $ and select the Make
New Call option1.
• To switch between an active call and a held call press O at
the Two Calls Switch? prompt.
1. A quicker method of making another call is to enter the
number to be called directly and press O. Your phone will
place the current call on hold and attempt to call the number
entered.
Making and Receiving Phone Calls
31
English
l1gs_us.bk : usephone.fm5 Page 32 Wednesday, August 25, 1999 11:19 AM
• To accept a waiting call during an active call, press O at the
Call Waiting Answer? prompt. The active call will be
placed on hold. If you prefer to end the active call before
accepting the waiting call, press $ and select the End
Active Call option.
• To reject a waiting call, press $ and select the Reject
Call Waiting option (or simply press the C key).
AIf you have an active call, a call on hold and a call waiting,
you cannot accept the waiting call until you end either the
active call or the held call, or join the active and held calls.
Call Holding and Call Waiting Messages
During Call Holding and/or Call Waiting operations, your phone
may display one or more of the following messages:
Trying
A request to hold the active call, swap the active with a held
call, or add a member to a Conference Call, has been made.
or
A request to reconnect the held call has been made.
Hold Failed
The request to hold a call has been unsuccessful.
Cannot Hold Second Call
A call is already on hold, you cannot place two calls on hold at
the same time.
Connection Failed
The held call could not be made active again.
Busy Try Later
Your phone is still working on a previous command. Wait a
short time before repeating the command.
English
32
Making and Receiving Phone Calls
Anonymous
The person who is calling you has blocked their number from
appearing on your phone.
Unavailable
The network is unable to provide the caller’s number.
Conference Unsuccessful
The request for Conference Call has been unsuccessful.
Transferring Call
A request to transfer a call has been made.
Transfer Unsuccessful
The request to transfer a call has been unsuccessful.
l1gs_us.bk : usephone.fm5 Page 33 Wednesday, August 25, 1999 11:19 AM
Making a Conference Call
This option joins the active call with a held call. With Conference
Call, you can have a conference with up to five other telephones.
At any time during your call, you can add, disconnect or separate
individuals from the Conference Call using other “ In-Call” menu
options.
No matter which method is chosen to add a new call, the original
Conference Call will be first placed on hold while the new call is
being connected. You must then enter the “ In-Call” menu and
select Conference Call to join the New Call with the original
Conference Call in progress.
AYou must subscribe to both Conference Call and Call
Waiting Supplementary Services to be able to use this
feature.
Separate One of the Members in the Conference
During a Conference Call, you will also have the option to
separate a selected member from the main Conference Call.
Initiating a Conference Call
To initiate a Conference Call, place the active call on hold, and
dial another phone number. You will then have one active call
and one call on hold.
Press the $ key to enter the “ In-Call” menu and select
Conference Call. The currently active call and the call on
hold will then join into one Conference Call.
Managing a Conference Call
While in a Conference Call, you will have the option to add new
calls to the Conference Call or separate one of the members from
the Conference Call.
Adding a New Call
There are a number of different ways to add new calls to the
Conference Call:
AIn order to separate a member from the main Conference
Call, there must not be any calls on hold.
Press $ during a Conference Call and select Split Call.
You will then be presented with the phone number or name of
all members of the Conference Call. Use the scroll keys to find
the selected member of the Conference Call. Once the desired
member is selected, press the O key and select Split Call.
At this point, the selected call will be separated from the main
Conference Call and private conversation between you and the
selected member is possible.
To re-join all the parties again, select Conference Call from
the “ In-Call” menu.
• Using the digit keys.
• Using the Make New Call option from the “ In-Call” menu.
• Recalling a Phone Book Entry using Quick Access.
• Answer Call Waiting.
Making and Receiving Phone Calls
33
English
l1gs_us.bk : usephone.fm5 Page 34 Wednesday, August 25, 1999 11:19 AM
Transfer Call
Transfer Call transfers a call to another telephone. There are two
ways to transfer a call; before or after the third party is
connected.
AYou must subscribe to both Conference Call and Call
Waiting Supplementary Services to be able to use this
feature.
Initiating Transfer Call Before the Third
Party is Connected
To transfer a call to another telephone, press the $ key and
select Transfer Call from the “ In-Call” menu. Enter the
number where the call will be transferred and press O.
Your phone will then attempt to transfer the call. The display will
show Transferring Call followed by Call
Transferred. When the call has been successfully transferred,
you will be disconnected automatically.
Initiating Transfer Call After the Third Party
is Connected
If you already have an active call and a call on hold, press the
$ key and select Transfer Call from the “ In-Call” menu.
Your phone will then attempt to transfer the active call to the call
on hold. The display will show Transferring Call followed
by Call Transferred. Once the call has been successfully
transferred, you will be disconnected automatically.
English
34
Making and Receiving Phone Calls
l1gs_us.bk : opt_menu.fm5 Page 35 Wednesday, August 25, 1999 11:19 AM
Using the Options Menu
Using the Options Menu
35
English
l1gs_us.bk : opt_menu.fm5 Page 36 Wednesday, August 25, 1999 11:19 AM
The Phone Book Menu
AIf your service provider has added their own menu, the
Phone Book menu will not be the first item in the Options
menu.
English
36
Using the Options Menu
l1gs_us.bk : opt_menu.fm5 Page 37 Wednesday, August 25, 1999 11:19 AM
j What is the Phone Book?
You can store names and telephone numbers as entries in an
electronic 'Phone Book'. These entries are stored in the Personal
Numbers list in your phone or SIM card's memory, and in the
Fixed Dial list1 on your SIM card. Once stored, a number can be
quickly retrieved and dialed.
Your phone can store 100 entries and the SIM card can store up
to 155 entries in the Personal Numbers list. The number of SIM
card entries will vary depending upon the type of SIM card issued
by your Cellular Service Provider.
You can also store up to 40 entries in a Fixed Dialing list if you
have this feature. Fixed Dialing allows you to limit use of your
phone to particular numbers, or, if you wish, to country codes,
area codes, or other prefixes of your choosing.
Each Phone Book entry comprises:
• A telephone number. Up to 32 digits can be stored, but this is
reduced to 20 digits for SIM card locations.
Postscripting
This allows you to make use of area codes and other prefixes
previously stored in your Phone Book when making a call.
To use postscripting, select the Phone Book entry containing the
prefix and then simply enter the rest of the number and press
O to make the call.
You can also use postscripting if you want to call a number
similar to one you have stored in your Phone Book. Retrieve the
number from the Phone Book, delete the relevant digits and then
enter the new number.
APostscripting a number does not overwrite the entry in the
Phone Book.
APostscripting is not available when accessing the Phone
Book using the Smart button.
• A name. Up to 16 characters for phone locations. Up to 50
characters for SIM card locations, but typically 10 or less.
• A location label - from 1 to 255 in your Personal Numbers list,
or 1 to 40 in your Fixed Dial list.
1. Availability of the Fixed Dialing feature depends on the type of
SIM card you have.
Using the Options Menu
37
English
l1gs_us.bk : opt_menu.fm5 Page 38 Wednesday, August 25, 1999 11:19 AM
How to Enter Alphabetic Characters
The 0, 1,... ...,8 and 9 keys are used to enter
alphabetic characters, for example when storing names in the
Phone Book or when creating messages.
Available Characters
Press the appropriate keys to get the following characters:
1
Space . 1 ? ! , Ÿ Ä & : " ( ) ' ` @ % ¡
¢
Space . 1 ? ! , Ÿ Ä & : " ( ) ' ` @ % ¡
¢
2
A B C 2 [ ® ± ¼ ¾ ©
a b c 2 { ¯ ± ½ ¾ ©
3
D E F 3 ° ¿ ¤ ²
d e f 3 ° ¥ ¤ ²
A long press of any of the keys will switch all the characters to
lower case, a second long press will switch back to upper case.
4
G H I 4 À §
g h i 4 À §
To enter the next character press the appropriate key. If,
however, the next character is on the same key as the previous
character you will first need to press the > key. Pressing the
> key a second time will produce a space.
5
J K L 5 Á
j k l 5 Á
6
If a mistake has been made, you can go back to the incorrect
character by pressing <.
M N O 6 ] \ « ¨ µ
m n o 6 } | ¬ ¨ µ
7
Characters can be removed from the display by pressing the C
key.
P Q R S 7 Â ¾ ¸
p q r s 7 Â ¾ ¸
8
The character before the cursor (Ö) is the character which will be
deleted.
T U V 8 ¹ ^ ¦
t u v 8 ¹ ~ ¦
9
W X Y Z 9 º ·
w x y z 9 º ·
0
+ - 0 x * / = > < #
+ - 0 x * / = > < #
For example, if you press the 5 key, the first displayed
character will be J. If this is not the required character, then you
can press the same key again to show K. Another press will
display L, another... ...will display 5. Your phone will continue to
scroll through the characters available on the selected key with
each new key press.
Press the O key to store the information.
The top line for each key shows the upper case characters, the
lower line shows the lower case.
English
38
Using the Options Menu
l1gs_us.bk : opt_menu.fm5 Page 39 Wednesday, August 25, 1999 11:19 AM
Personal Numbers
The Personal Numbers sub-menu is used for creating and
managing your list of personal numbers.
Find Entry By Name
i Press = and use the volume button to scroll to the stored
number, or press the appropriate digit key to skip to a
particular letter. To make the call, either hold down = for
1.5 seconds or press O.
This option is used to select a telephone number from a list of
alphabetically sorted Phone Book names.
Once selected, this option will display the message Enter
Name. You can enter a maximum of three characters from a
name but you do not need to enter all three characters to begin a
search.
Find Entry By Location
i G>
This option is used to select a telephone number from a list of
numerically sorted Phone Book locations.
Once selected, this option will display the message Enter
Location. You can now enter a location number. If the entered
location is not valid, a timed message Range 1-XXX will be
displayed and the phone will return to the Enter Location
menu item.
The Phone Book entries will be searched and an entry will be
displayed.
If you enter a location number for which there is no entry,
Location Empty will be displayed and the nearest non-empty
location will be selected instead.
The Phone Book entries will be searched and the first
alphabetically matching entry will be displayed.
If you did not enter a location, the first numerical entry will be
displayed.
If there isn’t a name matching your entry, the nearest
alphabetically matching entry will be displayed.
If there are no numbers stored, No Numbers Stored will be
displayed.
If you do not enter any name information, the first alphabetical
entry will be displayed.
To display adjacent Phone Book entries use the ª key. When
the desired name is displayed press the O key to select it. The
phone then enters the options sub-menu for Find Entry By
Location. See ‘The Options for ‘Find Entry By ...’’
If there are no names stored, No Names Stored will be
displayed.
To display adjacent Phone Book entries use the ª key. When
the desired name is displayed press the O key to select it. The
phone then enters the options sub-menu for Find Entry By
Name. See ‘The Options for ‘Find Entry By ...’’.
Using the Options Menu
39
English
l1gs_us.bk : opt_menu.fm5 Page 40 Wednesday, August 25, 1999 11:19 AM
The Options for ‘Find Entry By ...’
Once a Phone Book entry has been selected, it can be called,
modified or deleted.
Call Number
This option is used to call the selected Phone Book telephone
number.
Modify Name or Number
This option is used to change the selected Phone Book entry.
The entry’s current telephone number and name will be
presented, in turn, for modification. You can accept the current
settings or modify as required.
Erase Name and Number
This option is used to erase the selected Phone Book entry.
Simply press the O key when the phone displays the message
Erase Name And Number. The option will display the timed
message Erased XXX and then return to the Find Entry
menu item.
Add Entry
i Press E. Select the Quick Access feature.
This option is used to add (store) entries to the Phone Book. You
can choose to add the new entry to either the phone or SIM card
memory locations.
English
40
Using the Options Menu
Add To Phone Memory, Add To SIM Card Memory
Once you have selected the destination of the new entry, you will
be asked to enter the telephone number, name and location
number of the new entry.
The last telephone number displayed will be presented by
default; it can be used or discarded as required.
If the entered location is not valid, a timed message Range
YYY-ZZZ will be displayed and the phone will return to the
Enter Location prompt. If the chosen location is currently
used by another entry, you will be asked for confirmation that
the location can be overwritten.
If you do not supply a location number, the next available
location will be used.
When the new entry has been entered, a timed message
Stored XXX will be displayed.
Check Capacity
This option is used to check the number of free Phone Book
entries in the phone or SIM card memory areas.
Check Phone Capacity, Check SIM Capacity
Once selected, a timed message XX Unused Locations
displays the requested information.
Prevent Access
This option enables you to prevent access to the Personal
Numbers list.
l1gs_us.bk : opt_menu.fm5 Page 41 Wednesday, August 25, 1999 11:19 AM
To SIM Card Memory, To Phone Memory, To Phone &
SIM Memory, No Memory Restrictions
You can prevent access to all entries in the SIM card memory, the
phone memory or both the phone and SIM card memory. To
cancel all access restrictions use the No Memory Restrictions
option.
When you change the restrictions, you will be requested to enter
the Security Code before the change is made.
Show Services
i Press E. Select the Quick Access feature.
This option displays a list of phone numbers and services
provided by your Cellular Service Provider.
AAvailability depends on the type and settings of the SIM
card, and/or your subscription to this feature.
Last Ten Calls
These options allow you to review your most recently used phone
numbers. Depending on the option you choose, you can then
redial a phone number, store a phone number in your phone
book, or erase all of the phone numbers.
After you select an option, use the ª key to scroll through the
list of phone numbers. Press the O key to proceed.
AYou can use postscripting to modify a number once you
have retrieved it from either of the Last Ten Calls lists.
Last Calls Made
Select this option to redial the phone number of any one of the
last ten calls made.
Last Calls Received
i Press E. Select the Quick Access feature.
Select this option to redial the phone number of any one of the
last ten calls received. In addition, you can add time and date
information to one call, and you can store any of the phone
numbers in your phone book.
AYou will only see numbers in the Last Calls Received list if
you have Caller Line Identification.
When you scroll through your last ten calls, each call appears
with a call position number, for example:1+, 2-, 3+ ... 10+. A +
symbol indicates that you answered the call. A - symbol
indicates that you did not answer the call.
Press the O key to select a phone number. You can then scroll
through and select one of the following options:
Call Number
Select this option to call the phone number.
Time and Date
Select this option to add a time and date stamp to the phone
number. Press the O key to accept the date and time stamp
and return to the list of last ten calls received.
Using the Options Menu
41
English
l1gs_us.bk : opt_menu.fm5 Page 42 Wednesday, August 25, 1999 11:19 AM
Add to Phone Memory
Select this option to add all the phone number details (including
any details you have added) to your phone memory. If the name
in the received call does not appear in your phone book, the
phone prompts you to Enter Name and Enter Location.
For further details, see 'Add Entry' in this section.
Add to SIM Card Memory
Select this option to add the phone number details (including any
details you have added) to your SIM card memory. If the name in
the received call does not appear in your phone book, the phone
prompts you to Enter Name and Enter Location. For
further details, see 'Add Entry' in this section.
Erase All Numbers
This option erases all the numbers stored in your Last Ten Calls
Made and Last Ten Calls Received lists.
AThe Last Ten Calls lists will be erased when a new SIM is
inserted in the phone.
English
42
Using the Options Menu
My Phone Number(s)
This option allows you to access your cellular phone, fax and data
numbers so that you can retrieve or modify them when required.
For example, if you have difficulty remembering your cellular
phone number, store it with the name My Phone and then you
will be able to retrieve the number as required.
The My Phone Number(s) list is stored on your SIM card.
When you select this item, the first location will be displayed. Use
the ª key to scroll through the phone numbers stored.
To enter or change a number, scroll to the location and press
O. You will be prompted to enter a phone number and then a
name. Press O to store the information.
ADepending on your Cellular Service Provider, you may find
that one or more of the entries in the My Phone Number(s)
list will have been defined. You may not be able to change
these predefined entries.
l1gs_us.bk : opt_menu.fm5 Page 43 Wednesday, August 25, 1999 11:19 AM
Fixed Dialing
AAvailability of the Fixed Dialing menu depends on the type
of SIM card.
This feature allows you to limit use (typically third-party use) of
your phone to a predefined list of telephone numbers or, if you
wish, to a list of country codes, area codes, or other prefixes of
your choosing.
When Fixed Dialing is switched on, the only numbers that can be
dialed from your phone are those stored (or whose prefix is
stored) in the Fixed Dial list. If you attempt to dial any other
number (apart from an emergency number), the message
Restricted will be displayed. You will not be able to make fax
or data calls.
To make a call when Fixed Dialing is switched on, either dial the
number manually, or select it from the Fixed Dial list and press
O.
Up to 40 entries can be stored in the Fixed Dial list. The list is
stored on your SIM card.
! This option may be affected by the Call Barring setting.
View Fixed Dial List
This option allows you to scroll through the numbers in the Fixed
Dial list. When you find the number you want, press O to
make the call.
Setup Fixed Dialing
This option allows you to switch Fixed Dialing on or off and to
enter or change entries in the Fixed Dial list.
You will be prompted to enter your PIN2 security code when you
select this option.
On
Switches fixed dialing on.
Off
Switches fixed dialing off.
Edit Entry
Modifies or clears an entry in the Fixed Dial list. When you select
this option, the first non-empty location in the list will be
displayed. Scroll to the entry you want to change and press O.
You will be prompted to edit the phone number and the name.
To erase the entry, press C.
Add Entry
Adds a phone number and name to the Fixed Dial list. When you
select this option you will be prompted to enter the phone
number, name and a location number. If you do not specify a
location number, it will be stored in the next available location.
AWhen setting up your Fixed Dial list, you may want to
reserve the first nine locations for phone numbers you wish
to One-Touch Dial. See also ‘One-Touch Dial Setting’.
Erase Entry
Erases a phone number and name from the Fixed Dial list. The
first entry in the Fixed Dial list will be displayed. Scroll to the entry
you wish to delete and press O.
Using the Options Menu
43
English
l1gs_us.bk : opt_menu.fm5 Page 44 Wednesday, August 25, 1999 11:19 AM
One-Touch Dial Setting
This option allows you to specify which Phone Book list can be
One-Touch Dialed.
To Phone Memory
Switches One-Touch Dialing to your Personal Numbers list stored
in phone memory (locations 1 to 9).
To SIM Card Memory
Switches One-Touch Dialing to your Personal Numbers list stored
on your SIM card (locations 101 to 109).
To Fixed Dial list
AThis option is only available if you have Fixed Dialing.
Switches One-Touch Dialing to your Fixed Dial list
(locations 1 to 9).
English
44
Using the Options Menu
l1gs_us.bk : opt_menu.fm5 Page 45 Wednesday, August 25, 1999 11:19 AM
Call Related Features Menu
Show Battery Meter
This option displays the approximate amount of battery capacity
remaining, for example:
Number of
Segments
Approximate Charge Level
1
less than 5% (recharging needed)
3
less than 20%
5
less than 60%
7
greater than 60%
i Display the detailed battery meter easily with the Quick
Access item (G).
Using the Options Menu
45
English
l1gs_us.bk : opt_menu.fm5 Page 46 Wednesday, August 25, 1999 11:19 AM
Restrict My Phone Number
j Call Forwarding
'Restrict My Phone Number' is a network feature. You will need
to subscribe to one of the two Caller Line Identification restriction
features with your Cellular Service Provider.
Show ID on Next Call
Your phone number is sent with the next attempted call, after
this your phone number will not be sent until you re-select this
option.
Restrict ID on Next Call
i Press E. Select the Quick Access feature.
Your phone number will not be sent with the next attempted
call, after this your phone number will be sent with calls until you
re-select this option.
Call forwarding is a network feature. If your phone is unavailable,
or you do not wish to receive calls, incoming calls can be
forwarded to other phone numbers.
This option can be used to:
• Forward all incoming Voice calls unconditionally.
• Forward incoming Voice calls whenever your phone is
unavailable, busy, not reachable or not answered.
• Forward incoming Fax calls.
• Forward incoming Data calls.
• Reset all forwarding options to off.
AYou cannot change the call forward settings when you are
out of network coverage.
English
46
Using the Options Menu
l1gs_us.bk : opt_menu.fm5 Page 47 Wednesday, August 25, 1999 11:19 AM
After selecting any of the call forward options there will be a
short delay while the phone asks the network for the current
setting.
Forward Voice Calls
This option will allow you to set your phone to Forward When
Unavailable, Forward All Voice Calls or Detailed Forwarding.
Forward When Unavailable
This option will enable you to forward all incoming Voice calls to
a single number, whenever your phone is unavailable.
AWhen On, Forward All Voice Calls takes priority over all
other Voice call forwarding settings.
Detailed Forwarding
These options will enable you to forward Voice calls to different
numbers, depending upon the current status of your phone.
Each of the following detailed forwarding options operate in the
same way.
Each option has two settings, On or Off.
The option has two settings, On or Off.
If you change the setting to On, you will be asked to enter a
forwarding phone number using the digit keys.
If you change the setting to On, you will be asked to enter a
forwarding phone number using the digit keys.
ADetailed forwarding settings are ignored while Forward All
Voice Calls or Forward When Unavailable are On.
ASetting “Forward When Unavailable” to On will have the
same effect as setting all “Detailed Forwarding” options to
On.
AWhen On, Forward When Unavailable takes priority over
detailed forwarding settings.
Forward All Voice Calls
i Switch between Forward On and Off easily with the Quick
Access item (P).
This option will enable you to unconditionally forward all
incoming Voice calls to a single number.
If Busy
This option will forward incoming calls if your phone is busy.
If Not Reachable
This option will forward incoming calls if your phone cannot
be contacted by the network.
If No Answer
This option will forward incoming calls if you do not answer
the call.
Forward Fax Calls
This option will enable you to forward all Fax calls to a single
number.
The option has two settings, On or Off.
The option has two settings, On or Off.
If you change the setting to On, you will be asked to enter a
forwarding phone number using the digit keys.
If you change the setting to On, you will be asked to enter a
forwarding phone number using the digit keys.
Using the Options Menu
47
English
l1gs_us.bk : opt_menu.fm5 Page 48 Wednesday, August 25, 1999 11:19 AM
Forward Data Calls
This option will enable you to forward all Data calls to a single
number.
The option has two settings, On or Off.
If you change the setting to On, you will be asked to enter a
forwarding phone number using the digit keys.
Cancel All Forwarding
This option will enable you to cancel the forwarding of incoming
calls.
! This option resets all forwarding settings to Off and
removes all forwarding numbers.
j Call Waiting
The Call Waiting menu item has two settings On or Off. If you
select Off, you will be not be notified of waiting calls. The
person trying to contact you will either receive the busy tone, or
be forwarded by the ‘Detailed Forwarding - If Busy’
option.
If Call Waiting is On, you will be notified of a waiting call by an
audible alert and by the message Call Waiting - Answer?.
You can press the O key to accept the waiting call, or use the
$ and then the ª key to scroll to an alternative option and
then press O.
AIf you have Caller Line Identification, the caller’s number or
name is displayed instead of the Call Waiting message.
AAvailability of this feature depends on your service provider.
English
48
Using the Options Menu
j Call Barring
Call barring is a network feature which can be used to selectively
bar outgoing and incoming calls.
If you change the barring setting, you may be asked to enter your
barring password. There will be a short delay while the phone
notifies the network of the new setting. When the change has
been made by the network, the phone will display a confirmation
message.
The initial password will be supplied to you by your Cellular
Service Provider when you subscribe to this service.
AThis option may be affected by the Fixed Dialing setting.
Bar Outgoing Calls
After selecting this option, there will be a short delay while the
phone asks the network for the current setting.
Int'l Calls
When selected, this option will bar outgoing international calls.
Int'l Calls Except Home
When selected, this option will bar outgoing international calls,
except those to your home country.
All Calls
When selected, this option will bar all outgoing calls, except
emergency calls.
Off
When selected, this option will disable all call barring for
outgoing calls.
l1gs_us.bk : opt_menu.fm5 Page 49 Wednesday, August 25, 1999 11:19 AM
Bar Incoming Calls
After selecting this option, there will be a short delay while the
phone asks the network for the current setting.
When Roaming
When selected, this option will bar incoming calls when you are
roaming.
You may wish to select this option, as some Cellular Service
Providers charge an additional fee for receiving calls when you
are roaming.
Key Answer Only
AThis option is only available if you have a phone with a flip.
This feature has two options: On or Off.
When set to On, this feature allows the flip to be opened without
answering an incoming call. The call can be answered by pressing
an appropriate key (O, 1 to 9, ª, < or >). To
reject the call press C.
When set to Off, opening the flip answers an incoming call.
All Calls
When selected, this option will bar all incoming calls.
Off
When selected, this option will disable all call barring for
incoming calls.
Cancel All Barring
This option can be used to set all Call Barring options to Off.
Change Bar Password
This option can be used to change the call barring password.
After selecting this option, you will be asked to enter the current
password.
You will then be asked to enter, and then re-enter, your new,
4 digit, barring password. When the change has been made by
the network, the phone will display a confirmation message.
Using the Options Menu
49
English
l1gs_us.bk : opt_menu.fm5 Page 50 Wednesday, August 25, 1999 11:19 AM
Messages Menu
SMS Messages
These are text messages that are sent specifically to and from
your phone number.
When an SMS message is received, your phone:
1 Makes three short alert tones (depending on the ‘Ring or
Vibrate’ setting).
2 Displays the o (messages) icon.
3 Stores the message for later viewing, if there is space. If there
is not enough space, the o icon will flash. One or more
messages must be removed before the message can be stored.
Your Cellular Service Provider will transmit a message for a limited
amount of time. If a memory location is not made available
before the message is removed from the network, then you will
not be able to receive or read it.
4 Message will then be displayed with the prompt; Read
Now?
5 If O is pressed, the phone will enter the Received Messages
browser and immediately display the new message.
6 If C is pressed the phone will return to the screen which
was displayed prior to receipt of the message.
7 If any other key is pressed it will perform the function linked
with that key.
Your phone supports the two GSM message features: Short
Message Services (SMS) and Cell Broadcast.
English
50
Using the Options Menu
8 If no key is pressed the display will time-out after 1 minute and
return to the screen which was displayed prior to receipt of the
message.
l1gs_us.bk : opt_menu.fm5 Page 51 Wednesday, August 25, 1999 11:19 AM
Cell Broadcast Messages
These are general messages, broadcast to a group of phones and
can only be received when your phone is in standby mode.
These messages are broadcast in numbered 'channels' and, in
general, each channel will tend to carry one particular type of
information.
Typical cell broadcast channels could have information on local
weather conditions, traffic reports or stock market prices. Please
contact your network operator for a list of available channels and
the information they supply.
When the message has scrolled across the display, the beginning
of the message will be shown until you either remove it or a new
message arrives.
How to Read SMS Messages
You can use the scroll key (ª) to scroll through messages in
either the Received Messages or Outgoing Messages lists.
To display a specific message, enter the message number, for
example press 5 to display the 5th message. If the message
does not exist, Invalid Msg Number will be displayed.
Alternatively, to display the next message, press O and select
Go To Next Message.
How to Create and Edit SMS Messages
Use the Message Editor to create or modify text messages. When
you enter the editor, the last message that was edited will be
displayed. Press and hold C to clear the message and start a
new one, or modify the message displayed. For an explanation of
how to enter text, see ‘How to Enter Alphabetic Characters’.
Press O once you have completed your message. You will then
be presented with the following options:
Send Message - If you select this option you will be
prompted for a phone number, enter the number and then
press O to send the message.
Store Message - Select this option to store your edited
message in your Outgoing Messages list.
AIf you don’t store the message after it has been edited, you
will lose all your changes as soon as you select another
message to be edited.
j Call Voicemail
i Press E. Select the Quick Access feature.
This option will make a call to the current voicemail number. You
can also press f to call the Voicemail number.
The voicemail number is entered using the ‘Voicemail Number’
option in the Message Settings menu.
Using the Options Menu
51
English
l1gs_us.bk : opt_menu.fm5 Page 52 Wednesday, August 25, 1999 11:19 AM
j Received Messages
i Press E. Select the Quick Access feature.
This option is used to view and manage any SMS messages that
have been sent to your phone number.
When selected, this option will display a message indicating the
total number of messages and how many of these are new. If
there are no messages No Messages will be displayed.
If there are messages, the new messages will be displayed first,
followed by the old. Repeated presses of the ª key will display
the whole message, when it was sent and the phone number
who sent it (if available).
Once you have read a new message it will automatically become
old.
See ‘How to Read SMS Messages’ for more information on
navigating through the messages.
Press the O key, when viewing any message, to enter the
sub-menu.
Delete Message
This option will delete the currently viewed message
Reply to Message
This option allows you to reply with a message.
Return Call
This option can be used to call the person who sent you the
message, if their number has been included by the network, or a
number that has been included in quotes “” in the message.
English
52
Using the Options Menu
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to either send the modified message
and/or store it in your Outgoing Messages list. See ‘How to
Create and Edit SMS Messages’ for more information on using
the Message Editor.
Go to Next Message
This option will display the next received message.
If you are currently reading the last message in your list then this
option will take you back to the top of the list.
Delete All Messages
This option allows you to delete all received messages whether
they have been read or not.
AOnce deleted, messages are NOT retrievable.
l1gs_us.bk : opt_menu.fm5 Page 53 Wednesday, August 25, 1999 11:19 AM
Outgoing Messages
i Press E. Select the Quick Access feature.
This option is used to view and manage any outgoing messages.
These messages will be stored on your SIM card. When you select
this option, the total number of messages will be displayed
followed by the first message in the list.
AYou cannot send an outgoing message until the Message
Service Center number has been set. See ‘Message
Settings’.
Press the O key, when viewing any message, to enter the
sub-menu. See ‘How to Read SMS Messages’ for more
information on navigating through the messages.
Send Message
Find Entry by Location - this allows you to recall a phone
number from the Phone Book by location and send the message
(see ‘Find Entry by Location’ in the ‘Phone Book’ section).
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to either send the modified message
or store it in your Outgoing Messages list. See ‘How to Create
and Edit SMS Messages’ for more information on using the
Message Editor.
Delete Message
This option will delete the currently viewed message.
Go to Next Message
This option will display the next outgoing message.
Message Editor
i Press E. Select the Quick Access feature.
This option allows you to add the destination phone number
using a sub-menu. Using the scroll keys you can select:
The Message Editor is used to edit the currently selected message
and then to either send the modified message or store it in your
Outgoing Messages list. See ‘How to Create and Edit SMS
Messages’ for more information on using the Message Editor.
Enter Number - this allows you to manually enter the phone
number using the keypad and send the message.
Find Entry by Name - this allows you to recall a phone number
from the Phone Book by name and send the message (see ‘Find
Entry by Name’ in the ‘Phone Book’ section).
Using the Options Menu
53
English
l1gs_us.bk : opt_menu.fm5 Page 54 Wednesday, August 25, 1999 11:19 AM
Cell Broadcast
This option is used to set the cell broadcast settings. The option
has two settings On or Off.
If you change the setting to On, you will be asked to enter the
channel you wish to receive information from.
Please contact your Cellular Service Provider for a list of available
channels and the information they provide.
While a broadcast message is scrolling across the display you can
stop and start it by pressing <. Press > to restart the
message from the beginning. If you want to remove the message
from the display, press C.
AIf you need to use the < and > keys for their normal
functions while you are receiving a cell broadcast message,
you must first remove the message.
Message Settings
Voicemail Number
This option is used to enter a phone number which will be used
by the ‘Call Voicemail’ option.
If there is already a Voicemail Number, this will be shown in the
display. This can be used, modified or deleted as desired.
ARemember to add the + symbol and the appropriate
country code prefix to the phone number.
English
54
Using the Options Menu
Service Center
Before you can send any messages you must use this option to
enter your Message Service Center number. This number is
obtained from your Cellular Service Provider.
If there is already a Message Service Center number, this will be
shown in the display. This can be used, modified or deleted as
desired.
ARemember to add the + symbol and the appropriate
country code prefix to the phone number.
Expiry Period
You can use this option to specify the maximum time, in hours,
that your unforwarded messages are to remain with the Message
Service Center before being deleted. When you select this option,
the current expiry period will be displayed (the default is 24
hours).
The maximum value you can enter is 10584, though the real limit
will depend on your Message Service Center.
Outgoing Message Type
This option is network dependent and can be used to specify the
format of your outgoing messages. You can select from the
following message types: Text (default), Fax, X400, Paging,
E-Mail, ERMES or Voice.
AYou do not need to select Voice to send messages to
Voicemail boxes.
l1gs_us.bk : opt_menu.fm5 Page 55 Wednesday, August 25, 1999 11:19 AM
Phone Setup Menu
Using the Options Menu
55
English
l1gs_us.bk : opt_menu.fm5 Page 56 Wednesday, August 25, 1999 11:19 AM
Select Phone Line
j Ring or Vibrate
i Press E. Select the Quick Access feature.
i Press E. Select the Quick Access feature.
This option allows you to switch between Line 1 and Line 2.
This option sets the way your phone alerts you to an incoming
call. The options are:
AAvailability depends on the type and settings of the SIM
card, and/or your subscription to this feature.
Adjust Ring Volume
This option is used to set the incoming call ring tone volume.
The volume will be displayed as follows:
• Ring Only - the phone will ring with the tone specified by
the Set Ringer Tone option.
• Vibrate Only - the phone will vibrate using VibraCall™.
• Vibrate Then Ring - the phone will vibrate twice and
then ring.
• No Ring or Vibrate - the phone will just display the
Call message.
Adjust the volume by pressing the volume buttons on the side of
your phone.
i Press E followed by the volume button to either
increase or decrease the ringer volume.
AThe setting you choose also defines the type of alert for an
incoming SMS message (except that if you select Vibrate
Then Ring, your phone will just vibrate).
j Set Ringer Tone
This option sets the tone your phone will make when an
incoming call is received on Line 1.
Standard Tone
Your phone makes a standard ringing tone.
Single Ring Tone ... Music Tone
When selected, your phone will produce one of these alternative
ringer tones.
AIf you select the Single Ring Tone option, the phone will
only ring once when a call is received.
English
56
Using the Options Menu
l1gs_us.bk : opt_menu.fm5 Page 57 Wednesday, August 25, 1999 11:19 AM
j Set Ringer Tone 2
This option sets the tone your phone will make when an
incoming call is received on Line 2.
AThis option will not appear if you do not subscribe to Line 2.
j Set Message Alert Tone
This option sets the tone your phone makes when it receives an
SMS message.
Standard Tone
Your phone makes a standard SMS alert tone.
Single Ring Tone ... Music Tone
When selected, your phone will produce one of these alternative
SMS alert tones.
AIf you select the Single Ring Tone option, the phone will
only ring once when it receives a SMS message.
Quick Access Setup
This option allows you to do the following:
• Customize your Quick Access menu.
j Phone Lock
i Press E. Select the Quick Access feature.
This option is used to set, and change, the unlock code.
The unlock code can be set to protect your phone from
unauthorized use. It can be set to automatically lock your phone
each time it is switched on.
The unlock code is a four digit number which is set at
manufacture to 1234. This can be changed at any time by using
the 'change unlock code' option.
Automatic Lock
This option can be used to automatically lock your phone each
time it is switched on. The option has two settings, On or Off.
Lock Now
This option can be used to immediately lock your phone. Once
selected, your phone will be unusable until the unlock code is
entered.
Change Unlock Code
This option is used to change the unlock code.
After selecting this option, you will be asked to enter the current
security code before you can proceed.
You can now enter a four digit code to replace the old code.
ABy pressing the $ key, you can access this option even
when the phone is locked.
Using the Options Menu
57
English
l1gs_us.bk : opt_menu.fm5 Page 58 Wednesday, August 25, 1999 11:19 AM
Activate IR Port
i Press E. Select the Quick Access feature.
Press O to activate the infra-red feature. y Activated
indicates that the phone is ready for an infra-red connection.
Your phone waits for an infra-red connection for one minute and
then automatically de-activates. Before the infra-red feature deactivates, your phone emits an alert tone and displays the
Reactivate IR Port prompt. Press O to continue.
For additional setup details, see ‘Setting up the Infra-Red Feature’
in the ‘About Your Phone...’ section of this manual.
Adjust Contrast
i Press E. Select the Quick Access feature.
This option is used to adjust the screen contrast.
The contrast is displayed as follows:
Adjust the contrast by pressing < or > on the keypad.
Pressing O or C on the keypad will end the contrast
adjustment.
English
58
Using the Options Menu
Require SIM Card PIN
This option is used to set, and change, the PIN code.
The PIN code can be set to protect your SIM card from
unauthorized use. If set to On, access to your SIM card will be
restricted each time it is inserted or the phone is turned on.
The option has two settings, On or Off.
AIf the SIM card does not support PIN code disabling, these
items will not appear.
Change SIM PIN Code
This option is used to change the SIM card PIN code.
The 'Require SIM Card PIN' option must be set to On and you
must enter the old PIN code before you can proceed.
You will be asked to enter a new, four to eight digit code to
replace the old PIN code. The new PIN code must be entered
again as confirmation.
! If the PIN number is entered incorrectly three times in a
row, your SIM card will automatically lock-up and the
Blocked message will be displayed.
l1gs_us.bk : opt_menu.fm5 Page 59 Wednesday, August 25, 1999 11:19 AM
Unblocking Your Phone
If you receive the Blocked message you will need to enter an
unblock code and key sequence before you can use the phone.
If you receive the Blocked message when you try to enter your
PIN2 code, you will need to unblock and change the code using
the following key sequence:
AThe 8 digit PIN unblocking code will have been provided
with your SIM card by your Cellular Service Provider.
<<052<EO
JOJO
Enter the following key sequence to unblock your phone:
AThe 8-digit unblocking code will have been provided with
your SIM card by your Cellular Service Provider.
<<05<EO
FOFO
The new PIN code must contain four to eight digits.
! If this operation is performed incorrectly 10 times in a
row, your SIM card will become permanently blocked.
Change SIM PIN2 Code
This option is used to change your PIN2 security code.
! If the PIN2 unblocking operation is performed
incorrectly 10 times in a row, your PIN2 code will
become permanently blocked.
j New Security Code
The security code is used to control access to security and other
options within the menus.
When you select this option you must enter the old PIN2 security
code before you can proceed.
This option is used to change the security code, which is set at
manufacture to 000000.
You will be asked to enter a new, four to eight digit code to
replace the old PIN2 security code. The new PIN2 security code
must be entered again as confirmation.
Once selected, you will be asked to enter the current security
code before you can proceed.
! If the PIN2 security code is entered incorrectly three
times in a row, the Blocked message will be displayed.
When the Blocked message is displayed, you are not allowed
access to menu items that require you to enter the PIN2 code, for
example ‘Setup Fixed Dialing’ and ‘Call Charge Settings’.
You will then be asked to enter a new, six digit code to replace
the old security code.
AIn order to safeguard your phone, you should change your
security code from the factory setting as soon as possible.
Using the Options Menu
59
English
l1gs_us.bk : opt_menu.fm5 Page 60 Wednesday, August 25, 1999 11:19 AM
j Extended Menus
i Press and hold $. Extended Menus will be temporarily
activated until you exit the Options menu.
This option is used to switch the extended menus on or off.
If the extended menu option is switched off, you will not be able
to access any of the extended features.
The option has two settings, On or Off.
Show Time and Date
i Press E. Select the Quick Access feature.
When selected, this option displays the time and date until any
key is pressed.
j Set Time and Date
This option is used to set the time and date. You will be
prompted to Enter Time - the time must be entered in 24hour format. You will then be prompted to Enter Date.
j Set Time Format
This option is used to set the clock to either 12-hour or 24-hour
format.
English
60
Using the Options Menu
j Language Selection
This option is used to change the language for display messages.
The option has multiple settings.
When you select a language, all further display prompts and help
messages will be in the selected language.
Battery Saving Mode
This option can help you to conserve battery power by activating
DTX (Discontinuous Transmission), turning the status indicator
off, and deactivating the backlight for incoming Cell Broadcast
messages.
The option has two settings, On or Off.
j Select Keypad Tones
This option allows you to change or disable tones you hear when
you press a key.
The option has three settings, Normal Tones, Single Tone
or No Tones.
l1gs_us.bk : opt_menu.fm5 Page 61 Wednesday, August 25, 1999 11:19 AM
Phone Status
Status Review
This option can be used to view the current setting of menu
options.
When selected, your phone will display a list of menu items
which have been changed from the default setting. Press the
$ key to view the next item.
Master Reset
! This option should be used with caution.
This option is used to restore certain phone options to their
original settings.
When selected, you will be asked to enter the security code.
Once entered, the master reset option will perform the following
operations:
• Cancel Automatic Answer, Audible Call Timers, In-Call Display
Meter, Battery Save (DTX), Auxiliary Alert, Automatic
Handsfree, Automatic Lock, Cell Broadcast and Talk and Fax
Mode.
• Return Language Selection to Original.
• Restore Keypad Tones to Normal, Ringer Tones to Standard,
SMS Alert Tones to Standard, Volume Level to Medium and
Network Search frequency to Medium.
• Restore Extended Menus to their default settings.
Master Clear
! This option should be used with extreme caution, for
example it will clear all the Phone Book entries from
your phone memory.
This option is used to restore certain phone options to their
original settings.
When selected, you will be asked to enter the security code.
Once entered, the master clear option will perform the same
operations as 'Master Reset', plus the following operations:
• Clear the Phone Book entries from phone memory (not from
SIM memory)
• Clear the Last Calls Made and Last Calls received list
• Clear the Message Editor
• Reset the Resettable Call Timers.
Master Clear does not clear the:
• Fixed Dial list
• My Number(s) list
• Charge Meters
• Received and Outgoing Messages list
• Voicemail number
• SMS Service Center number
• Lifetime timer.
Using the Options Menu
61
English
l1gs_us.bk : opt_menu.fm5 Page 62 Wednesday, August 25, 1999 11:19 AM
Network Selection Menu
Network Selection
In order for the phone to make and receive phone calls, it must
register with a GSM 1900 network.
Your phone automatically searches for the last network used. If,
for any reason, this network is unavailable, your phone will
attempt to register with a new network.
When your phone needs to register with a new network, it will
generate a sorted list of networks.The network list is sorted in the
following order:
• The Home network.
• Networks from a preferred list.
• A random list of other networks found above a certain signal
strength.
Any forbidden networks, stored in the SIM card, will not be
included in the sorted list.
Available Networks
When selected, this option will scan to see which networks are
operating in your current location. When the scan is complete,
press the ª key to scroll through the list. When you see a
network you wish to register with or store in your preferred list,
press the O key. You will now enter the 'Register Now' and
'Make Preferred' sub-menu.
English
62
Using the Options Menu
l1gs_us.bk : opt_menu.fm5 Page 63 Wednesday, August 25, 1999 11:19 AM
Register Now
Once selected, your phone will try to register with the selected
network. If the registration fails, your phone will try to register in
the normal way.
Make Preferred
Once selected, you will be asked where the selected network is to
be located in the preferred list.
Network Search
These options determine how often your phone tries to register
with a network and how the attempt is made.
Registration Preferences
This option determines how the phone tries to register with a
network.
The option has two settings, Automatic Search or Manual
Search.
Automatic Search Mode
In the automatic mode, the phone will try to register with the
first network in the sorted list. If this is successful, your phone will
display the network name and then enter the standby mode.
Manual Search Mode
In the manual mode, the phone will present you with the sorted
list of networks. Use the ª and O keys to select one network
from the list. Your phone will try to register with the selected
network. If this is successful, the phone will display the network
name and then enter the standby mode.
If registration is unsuccessful, your phone will present the list
again after a preset period. The preset period is determined by
the 'Frequency Of Search' option.
Frequency of Search
This option is used to determine how long your phone waits
before attempting to re-register after a registration attempt has
failed.
The option has the following settings: Slow Search, Medium
Search, Fast Search or Continuous Search.
! Fast and Continuous Search may use up a significant
amount of battery power.
If registration is unsuccessful with one network in the list, your
phone will try the next listed network. If your phone fails to
register with any of the listed networks, it will start at the
beginning of the list after a preset period. The preset period is
determined by the 'Frequency Of Search' option.
Using the Options Menu
63
English
l1gs_us.bk : opt_menu.fm5 Page 64 Wednesday, August 25, 1999 11:19 AM
j Preferred Networks
Add Network to List
This option enables you to add networks to your preferred list.
When selected, the 'Choose From Available' option will scan to
see which networks are operating in your current location. When
the scan is complete, press the ª key to scroll through the list.
When you see a network you wish to store in your preferred list,
press the O key. You will be asked where the selected
network is to be located in the preferred list.
The 'Choose From Known' option will, when selected, present
you with a preset list of networks. Press the ª key to scroll
through the list. When you see a network you wish to store in
your preferred list, press the O key. You will be asked where
the selected network is to be located in the preferred list.
Select the 'Add New Network Code' option to enter network
codes directly. Once entered, you will be asked where the
network is to be located in the preferred list.
Show List of Networks
This option is used to display the networks you have stored in
your preferred list. In addition, pressing the O key will select
the currently displayed entry and enter a move/delete sub-menu.
When 'Move to New Location' is selected you will be asked to
enter a new location for the selected network.
When selected, 'Delete Selection' will remove the selected
network from the preferred list.
English
64
Using the Options Menu
Find New Network
i Press E. Select the Quick Access feature.
When selected, the phone will try to register with a network in
the normal manner, with one exception. When the registration
attempt is made, your current network will be excluded from the
list of those available. If the attempt fails, your phone will then try
to re-register with the previous network.
l1gs_us.bk : opt_menu.fm5 Page 65 Wednesday, August 25, 1999 11:19 AM
Call Meters Menu
Call Metering
Your phone has an internal metering system which can be used
to provide you with individual and total call times or costs.
ACall cost information is only available if you receive the
Advice of Charge service. If you do not receive this service,
then only time meters are available.
The meter can be displayed during a phone call and audible
tones can be generated to indicate the passage of call time.
Your phone can handle values up to 21 digits long, although
during calls it can only display the last 12 digits. If the value
exceeds 21 digits, then Too Large is displayed.
In addition, you can set a maximum charge limit so that your
phone will monitor either the number of units used or the call
cost, and then not allow the limit to be exceeded.
Show Call Timers
This feature allows you to display the duration of your calls and
to reset your time meters to zero.
If you receive the Advice of Charge service then all calls are
timed. If you do not receive the Advice of Charge service then,
depending on the model, either all calls or only outgoing calls are
timed.
Using the Options Menu
65
English
l1gs_us.bk : opt_menu.fm5 Page 66 Wednesday, August 25, 1999 11:19 AM
Show Last Call
i Press E. Select the Quick Access feature.
Displays the duration of your last call.
Total For All Calls
Displays the duration of all your calls since the time meter was
reset to zero using the ‘Reset All Timers’ option.
Reset All Timers
Sets the resettable time meters to zero. The Lifetime Meter is not
resettable.
j Set Audible Call Timers
Your phone provides two programmable audible call timers:
• The 'Single Alert Timer' will sound a beep just once during a
call, after a preset time has elapsed.
• The 'Repetitive Timer' will sound regular beeps during a call,
at preset intervals.
In both cases, the timers will sound their beeps ten seconds
before the end of the programmed time.
Set In-Call Display
This feature allows you to specify whether the time or charge
meters are displayed during a call. If you do not have the Advice
of Charge service, then only the time meter is available.
AIf a total charge limit has been set, then the in-call display
always shows your remaining credit.
English
66
Using the Options Menu
Show Time Per Call
This option is used to display the time meter during calls. If you
receive the Advice of Charge service, only the chargeable calls
will be displayed.
No In-Call Display
This option switches off in-call display of the charge/time meter.
Call Charge Settings
This feature allows you to customize your Advice of Charge
settings. You will be prompted to enter your PIN2 security code
before you can access the options.
AThis menu item is only available if you receive the Advice of
Charge service.
Reset Call Charges
This option resets your charge meters to zero.
Set Total Charge Limit
This option sets the maximum limit for call charges; once this
limit has been reached, the network will refuse any further
chargeable calls.
If you switch the charge limit On, you will be prompted to enter a
new limit. Enter the amount as either units or currency
depending on the setting of the Set Charge Type option.
Units must be entered as whole numbers.
AWhen the charge limit is On, you will not be able to make
fax or data calls.
l1gs_us.bk : opt_menu.fm5 Page 67 Wednesday, August 25, 1999 11:19 AM
Once a limit is set, the in-call display will show the remaining
credit. When you reach your last two minutes, the warning
message Approaching Charge Limit will be displayed and
a warning alert will sound. The sound will be repeated when one
minute remains. When the limit is reached the message Charge
Limit Reached will be displayed and you will not be able to
make any more chargeable calls.
Once the limit is reached the Total Charge Limit will need to be
reset or switched off before any chargeable calls can be made.
Select Off to switch off the charge limit.
Set Charge Type
This option defines whether charge information is displayed as
either phone units or currency.
Units
Sets the charge type to phone units.
Currency
Sets the charge type to currency. You will be prompted to enter
the Currency Name. Enter a 3-character notation, for example
GBP for the UK, DEM for Germany or FFR for France. You will
then be prompted for the Charge Per Unit. Enter the
amount and press O.
Lifetime Timer
This option is used to display the total time of all calls made on
your phone.
This meter can not be reset, the Reset All Timers, Master
Reset or Master Clear options have no effect.
Using the Options Menu
67
English
l1gs_us.bk : opt_menu.fm5 Page 68 Wednesday, August 25, 1999 11:19 AM
Accessory Setup Menu
Your phone can also be linked to external microphones and
speakers for hands free operation, and provides several options
to complement the use of car kits.
j Mute Car Radio
This option can be used to mute your car radio when you make,
or receive, a call when your phone is attached to the car kit. It
must be enabled by your local dealer.
This option has two settings, On or Off.
AThis option will have no effect if your car radio does not
have a mute feature, or if the car kit installation does not
support this option.
Automatic Answer
This option allows your phone to automatically answer an
incoming call after two rings.
This option has two settings, On or Off.
† Only this option will be displayed when the headset accessory
is attached.
‡ Availability depends on the type of car kit installed.
You will only be able to access this menu when your phone is
mounted in a car kit or when a headset accessory is attached.
Car kits can provide charging facilities and some provide
connection to an external antenna for better reception.
English
68
Using the Options Menu
AIf this option is On, we recommend that the 'Ring or
Vibrate' option be set to Ring Only.
Automatic Handsfree
This option is used in conjunction with the 'Automatic Answer'
option and a car kit, to transfer call conversation to external
microphones and speakers. It is available only with selected car
kits. Contact your Motorola representative for further details.
This option has two settings, On or Off.
l1gs_us.bk : opt_menu.fm5 Page 69 Wednesday, August 25, 1999 11:19 AM
Safety Timer
This option can be used to keep the phone on for a set period
after the vehicle ignition has been turned off. This prevents the
vehicle's battery from becoming drained and saves you from
having to re-enter PIN and Unlock codes after every short stop.
As standard the 'Safety Timer' is set to 60 minutes. Once
selected, this option can be adjusted to any value between zero
and 999 minutes. When set to zero, this option is effectively
switched off.
Auxiliary Alert
This option allows your phone to alert you of an incoming call by
flashing your vehicle lights, or by sounding the horn. It must be
enabled by your local dealer.
ASome local regulations prevent the use of this option and,
accordingly, this option may not be present on your phone.
Using the Options Menu
69
English
l1gs_us.bk : opt_menu.fm5 Page 70 Wednesday, August 25, 1999 11:19 AM
English
70
Using the Options Menu
l1gs_us.bk : qkaccess.fm5 Page 71 Wednesday, August 25, 1999 11:19 AM
Using the Quick Access Menu
Although the features in your phone are available through easy
access menus, some of the most commonly used features are
also available in the Quick Access menu. Each feature in the
menu is allocated a number from 1 to 9.
To use a Quick Access feature, you can use any of the following
methods:
• Press E followed by the number of the feature.
• Press E. Use ª to highlight the appropriate menu option
and then press O to select it.
You can change the features, and the positions of the features,
available in the Quick Access menu - see ‘Customizing the Quick
Access Menu’.
Each Quick Access feature is represented by an icon as well as the
feature name. The currently selected icon is shown with a dark
background.
B Find Name?
You will be prompted to Enter Name. Enter the first three
characters of the name and press O. The first matching entry
in the Phone Book will be displayed. Press O to call the
number.
K Read Messages?
Your newest message will be displayed; you can then read,
delete and edit messages as normal. See ‘Received Messages’ for
more information.
AThe menu shown above represents the default setting
supplied with your phone.
Using the Quick Access Menu
71
English
l1gs_us.bk : qkaccess.fm5 Page 72 Wednesday, August 25, 1999 11:19 AM
T Add to SIM?
You will be prompted to enter a phone number and then a
name.
AIf you already had a number displayed, it will automatically
be re-displayed when you select this feature.
The number will be stored in the next available SIM card location.
See ‘Add Entry’ for more information.
G Battery Meter?
A bar graph indicating the approximate battery charge level will
be displayed. The more bars displayed, the greater the charge
level.
See ‘Show Battery Meter’ for more information.
H Lock Now?
Immediately locks your phone, you will not be able to use your
phone until the unlock code is entered. See ‘Phone Lock’ for
more information.
Y Call Timer?
Displays the duration of your last chargeable call. See ‘Show Call
Timers’ for more information.
a Message Editor?
The last message that was edited will be displayed. Press and
hold C to clear the message and start a new one, or modify
the message displayed. See ‘How to Create and Edit SMS
Messages’ for more information.
English
72
Using the Quick Access Menu
L Vibrate On/Off?
VibraCall™ will be switched either on or off depending on the
current setting. If VibraCall™ is switched on, the ‘Ring or Vibrate’
setting changes to Vibrate Only. If VibraCall is switched off,
the ‘Ring or Vibrate’ setting changes to Ringer Only. See
‘j Ring or Vibrate’ for more information.
W Received Calls?
Displays the first entry in the Last Calls Received list. You can
scroll through the list and call the numbers as normal. See ‘Last
Calls Received’ for more information.
« Activate IR?
Activates the infra-red lens on the top of your phone. This allows
you to communicate with any external device that also supports
infra-red communications.
See ‘Activate IR Port’ for more information.
P Forward On/Off?
Unconditional voice call forwarding will be switched either on or
off depending on the current setting. This will allow Fax and Data
forwarding to remain enabled independent of the Voice Call
Forwarding setting.
AYou must have defined a forwarding number using the
‘Forward All Voice Calls’ option in the Call Forwarding menu
in order to use this feature.
AYou cannot switch call forwarding on or off if you are
outside network coverage.
l1gs_us.bk : qkaccess.fm5 Page 73 Wednesday, August 25, 1999 11:19 AM
D Find Location?
You will be prompted to Enter Location. Enter the location
number and press O. The first matching entry in the Phone
Book will be displayed. Press O to call the number.
F Add to Phone?
You will be prompted to enter a phone number and then a
name.
AIf you already had a number displayed, it will automatically
be re-displayed when you select this feature.
The number will be stored in the next available phone memory
location. See ‘Add Entry’ for more information.
R Call Voicemail?
Your phone will make a call to your voicemail number.
AYou must have defined a Voicemail number in order to use
this feature.
See ‘Call Voicemail’ for more information.
N Adjust Ring?
This option is used to display and to set the incoming call ring
tone volume.
V Switch Memory?
Switches one-touch dialing between the phone and SIM
memories depending on the current setting.
U Outgoing SMS?
Your newest message will be displayed; you can then read, send,
delete and edit messages as normal. See ‘Outgoing Messages’
for more information.
J Mute Phone?
Temporarily turns the microphone off during a phone call.
Reselect this option to resume your conversation.
c Restrict My ID?
Your phone number will not be sent with the next attempted
call; after this your phone number will be sent until you reselect
this option.
d Switch Line 1/2?
AAvailability depends on the type and settings of the SIM
card, and/or your subscription to this feature.
Allows you to switch between Line 1 and Line 2.
e Show Services?
AAvailability depends on the type and settings of the SIM
card, and/or your subscription to this feature.
Displays a list of phone numbers and services provided by your
Cellular Service Provider.
¥ Show Time/Date?
Displays the current time and date.
Using the Quick Access Menu
73
English
l1gs_us.bk : qkaccess.fm5 Page 74 Wednesday, August 25, 1999 11:19 AM
£ Show Credit?
Allows you to quickly display the Credit Remaining.
AThis will only show the credit remaining if you receive the
Advice of Charge service.
¤ Find New Network?
Allows you to quickly search for a new network.
© Adjust Contrast?
Allows you to adjust the screen contrast.
English
74
Using the Quick Access Menu
l1gs_us.bk : qkaccess.fm5 Page 75 Wednesday, August 25, 1999 11:19 AM
Customizing the Quick Access Menu
You can change the features in the Quick Access menu to suit
your personal preferences.
• Outgoing Messages
To customize the menu, you can use either the Quick Access
Setup menu or you can do the following:
• Last Calls Received
1 Press E and scroll to the menu item you wish to change.
2 Press and hold O to access the list of features available. The
currently selected feature will be displayed.
3 Scroll through the list until you find the feature you wish to
store in the Quick Access menu; press O.
• Message Editor
• Last Call Charge
• Last Call Timer
• Restrict My ID
• Forward Voice Call
• Show Time and Date
4 Completed will be displayed to confirm that the feature has
been stored.
• Credit Remaining
The items in the Quick Access list will appear in the following
order:
• Adjust Contrast
• Find New Network
• Activate IR
• Find by Name
• Find by Location
• Add Entry to Phone
• Add Entry to SIM
• Call Voicemail
• Battery Meter
• Phone Lock Now
• Phone Mute On or Off
• Ring Volume
• VibraCall On or Off
• Switch Memory
• Read Messages
Using the Quick Access Menu
75
English
l1gs_us.bk : qkaccess.fm5 Page 76 Wednesday, August 25, 1999 11:19 AM
English
76
Using the Quick Access Menu
l1gs_us.bk : access.fm5 Page 77 Wednesday, August 25, 1999 11:19 AM
Accessories
The following accessories have been designed to work with your
phone. Additional accessories may be available and are packaged
separately. Please refer to your local service provider or retail
outlet for more information.
Desktop Charger
The Desktop Charger allows you to charge a battery fitted in a
phone and a spare battery at the same time. The charging status
for each battery is indicated by LEDs at the front of the charger.
AThe Desktop Charger must be used with the Power
Adapter.
Power Adapter
The Power Adapter (charger) connects to the Desktop Charger or
directly to the phone. When connected directly to the phone, it
charges the battery and also provides dead battery operation.
The Power Adapter requires an appropriate Adapter Plug.
UK Adapter Plug
The UK Adapter Plug connects the Power Adapter to a UK-style
mains power outlet.
European Adapter Plug
The European Adapter Plug connects the Power Adapter to a
Continental European-style mains power outlet.
Aust/NZ Adapter Plug
The Australia/New Zealand Adapter Plug connects the power
adapter to a Australian/New Zealand mains power outlet.
Indian Adapter Plug
The Indian Adapter Plug connects the power adapter to an Indian
mains power outlet. This plug can also be used in Pakistan and
Bangladesh.
Cigarette Lighter Adapter
The Cigarette Lighter Adapter connects to your phone and allows
you to charge your phone's battery while driving. When the
phone is in use, the adapter overrides the battery therefore
preserving battery life. The adapter also provides dead battery
operation.
Smart Cellect
Allows you to send and receive data and fax calls using your
phone and a computer with a simple RS232 connection.
The supplied software allows you to manage your phone book
and send SMS messages direct from your PC.
Personal Handsfree System
The Personal Handsfree System allows you to use your phone
handsfree.
Leather Holster
The Leather Holster holds the phone while being worn on your
belt.
Belt Clip
The Belt Clip holds the phone while being worn on your belt.
ATo use the belt clip, you must remove the rubber plug from
the rear housing.
Accessories
77
English
l1gs_us.bk : access.fm5 Page 78 Wednesday, August 25, 1999 11:19 AM
Vehicle Handsfree System
The Standard Vehicle Handsfree System includes a phone holder
and battery charger, and provides handsfree operation.
AThese accessories require professional installation.
English
78
Accessories
l1gs_us.bk : notes.fm5 Page 79 Wednesday, August 25, 1999 11:19 AM
What to do if...
You can’t switch your phone on
Check the battery. Is it charged, properly fitted and are the contacts clean and dry? See ‘Important Battery
Information’.
You can’t make calls
Check the signal strength meter in the display. If the signal is weak, move to an open space or, if you are in
a building, move closer to a window.
Check if your phone is powered on.
Check the Network Selection settings. Try Manual Selection, or try another network. See ‘Network Search’.
Check your Operator coverage map.
Is Restricted displayed? Check the Call Barring and Fixed Dialing settings.
Has the call charge limit been reached? Use your PIN2 code to reset the limit or contact your Service
Provider. See ‘Set Total Charge Limit’.
Has a new SIM card been inserted? Check that no new restrictions have been imposed.
You can’t receive calls
Check the signal strength meter in the display. If the signal is weak, move to an open space or, if you are in
a building, move closer to a window.
Check the Call Forwarding and Call Barring settings.
Check the Ringer and VibraCall™ settings. If both are off, there is no audible alert. See ‘j Ring or Vibrate’.
Your phone won’t unlock
Have you inserted a new SIM card? Enter the new PIN code. See ‘Entering Your SIM Card PIN Code’.
Do you have a replacement phone? Enter the default phone unlock code - 1234.
Have you forgotten the unlock code? Press $ to change the unlock code (you will need your security
code).
Your PIN is blocked
Enter the PIN unblocking code supplied with your SIM card (see ‘Unblocking Your Phone’).
Your PIN2 is blocked
Enter the PIN2 unblocking code supplied with your SIM card (see ‘Change SIM PIN2 Code’).
Your SIM card won’t work
Is the card inserted the right way around? See ‘SIM Card Insertion/Removal’.
Is the gold chip visibly damaged or scratched? Return the card to your Service Provider.
Check the SIM contacts. If they are dirty, clean them with an antistatic cloth.
What to do if...
79
English
l1gs_us.bk : notes.fm5 Page 80 Wednesday, August 25, 1999 11:19 AM
The battery won’t charge
Check the charger. Is it properly connected? Are its contacts clean and dry? See ‘Your Battery’.
Check the battery contacts. Are they clean and dry?
Check the battery temperature. If it is warm, let it cool before recharging.
Is it an old battery? Battery performance will decline after several years use. Replace the battery.
Are you using a Motorola original battery? Your charging system may not be able to communicate with
your battery. See ‘Your Battery’.
The battery icon and meter are
missing
Are you using a Motorola original battery? Your charging system may not be able to communicate with
your battery. See ‘Your Battery’.
The battery drains faster than
normal
Are you in an area of variable coverage? This uses extra battery power.
Is it a new battery? A new battery will need two to three charge/discharge cycles to attain normal
performance. See ‘Charging a New Battery’
Is it an old battery? Battery performance will decline after several years use. Replace the battery.
Is it a battery that hasn’t been completely discharged? Allow the battery to fully discharge (until the phone
turns itself off) and then charge the battery overnight.
Check that the Frequency Of Search feature in the Network Selection menu has not been set to Fast or
Continuous. See ‘Network Search’.
Check that the Battery Saving Mode feature has not been set to Off.
Are you using your phone in extreme temperatures? At extreme hot or cold temperatures, battery
performance is significantly reduced.
You can’t cancel Call
Forwarding or Call Barring
Wait until you are in an area with good network coverage and try again.
The o symbol is flashing
There is not enough memory available to store another SMS message. Use the Messages menu to delete
one or more existing messages.
I can’t make international calls
Some Service Providers automatically bar the ability to make international calls. Contact your Service
Provider.
Have you included the relevant codes? Press and hold the 0 key to display the international dialing
prefix (+) and then enter the appropriate country code followed by the phone number.
English
80
What to do if...
l1gs_us.bk : patent.fm5 Page 81 Wednesday, August 25, 1999 11:19 AM
Patent Information
Manufactured under one or more of the following patents:
4963812
4963843
4965537
4970475
4972355
4121218
4127824
4128740
4138681
4193036
4254382
4972455
4975808
4982108
4984219
4989230
D314173
4302845
4312074
4327319
4329666
4369516
4369522
4992753
4998289
D315330 D315543 5004992
5008925
4378603
4390963
4398265
4400584
Re.31470
4431977
5010309
5010570
5014294
5014346
D316859
5017856
4434461
4455534
4462098
4484153
4485486
4486624
5018188
5020076
5020091
5020092
5020093
5023580
4972432
4491972
4504834
D278708 4523155
4546329
4549311
5023866
5023911
5025387
5028859
5029233
5036532
4550426
4551696
4564821
D282169 4571595
4573017
5040127
5042071
5045824
5053924
5055800
5055802
4574243
4585957
4602218
D284759 4616314
4617520
5055803
5057762
5058136
5059885
5060264
5060294
4626309
4628529
4629829
4630304
4630305
4633141
5063340
5065408
5067139
5068625
5070310
5077757
4636593
4636741
4644351
D288432 4648125
4649543
5081674
5083304
5093632
D325028 5107487
5109536
D288683 4654655
4654867
4662691
4667333
4668917
5111162
5113400
5113436
5117441
5117449
5121047
4670747
4672502
4692726
4704588
D292578
4706036
5121288
5121412
5122722
D327062 5124889
5127040
D292920 4710724
4711361
4715063
4716319
4716391
5127042
5128834
5130682
5130683
5133010
5136135
4723305
D294257 4727306
4727583
4730195
4734635
5140286
5142551
5142696
5148471
5150075
5150359
4737976
4740794
4741018
4741034
4742562
D295627
5150384
5152006
5152007
5153590
5157693
5159283
D295975 4751737
4761621
4764737
D297734
D297735
5160898
5163159
5164652
5166596
5166642
5170173
D297736 4777564
Re.32768 4783697
D299232
4797929
5170492
5173672
5175759
5175874
5177458
5182749
4798975
4800348
4802236
4803726
4809356
4811377
5185566
5187640
5187809
5192924
5193223
5195106
4811404
4816774
4817157
4823098
D300742
D300827
5195108
5198887
5200655
5201069
5202654
5203009
4827226
4827507
4829274
4829543
4837534
4843621
D334746 5204977
5205751
5208566
5210793
5211581
4845772
4851966
4868576
4872196
4873683
4876552
5212815
5212826
5214675
5214774
5220290
5222078
4876740
D304189 4879533
4885553
4887050
4890199
5222104
5222251
5224122
5230007
5230093
5233506
D305427 4896124
4896361
4897873
D305717
4903327
5233633
5235492
5237257
5237570
5239127
5239294
D306163 4904549
4905288
4905301
D306299
4910470
5241545
5241548
5241592
5241650
5241688
5241693
4912602
4916262
4918403
4918732
4922209
4924194
D338887 5242767
4930126
D309301 D309451 4945570
4954796
4956854
5247544
D339127 D339335 D339336
D339578 5249302
5250916
5251331
D339337
5253292
81
English
l1gs_us.bk : patent.fm5 Page 82 Wednesday, August 25, 1999 11:19 AM
5255292
5257414
5259005
5260170
5260988
5261119
5565881
5262710
5263052
5263055
5265219
D341589
5271042
D375932 D375952
Other patents pending
D342248 5276685
5276707
5276913
5278527
5278832
5278994
5280644
D343615 D343616
D343834
5280637
D343835 5287553
5287555
5287556
5289505
D344512
5297142
5299232
5301364
5301365
5308716
5312705
5321847
5323421
5325429
D348250 D348427
D348665 D348666 D348668 5331123
D349273
5327642
5336984
5338909
D350113 D350348 D350349 D350350
5349588
5351245
D351375 5359696
D352503 5366826
5361400
5363071
5365549
D353131
5367538
5367558
5371791
5373101
D353361 5375143
5375258
D353587
D353588
5379324
5384825
5392000
5392023
5396654
D356309
5402447
5406562
D357224
5404120
5404582
5406146
D357457 5410275
5414711
D358148 5420759
5424689
5428820
5430416
5432017
5434947
5436589
5428836
5436802
5438684
D361070 5444764
5446763
5448763
5448770
5448771
5453997
D362840 D362852
5461643
5463628
5477192
5465412
5469177
5475752
D365094
D365817 5486843
5487184
5488335
5490177
5493198
5493700
5493714
5495206
5497126
5497383
D367640
5499273
5504812
5506490
D368696 5508709
5510693
5511235
5513078
5513382
D369359 5513996
D369598
D369797 5519303
5519346
5519506
5519777
D370016
D370463 5526398
D370672 5530922
5539360
5542103
5542106
5544250
D372481 5546380
D372896
5551078
5555550
5559471
D374013 5561436
D374227
D374424
English
82
5570453
5572223
5572224
5577267
5577268
l1gs_us.bk : warrant.fm5 Page 83 Wednesday, August 25, 1999 11:19 AM
Motorola Limited Warranty
I. What This Warranty Covers And For How Long:
Motorola Inc. (Motorola) warrants the Motorola PCS Subscriber
Radiotelephone products and accessories against defects in
material and workmanship under normal use and service for a
period of time specified by the product’s serial number from the
date of installation.
AA Installation, in the case of radiotelephones, accessories or
batteries that are not installed in a vehicle, means the date
that the product is placed into subscriber service. Installation
will be deemed to be no later than thirty (30) days from
date of delivery of the Product to you the owner.
The warranty time period is specified by the last digit of the
mechanical serial number found on each PCS product. Products
sold under this warranty may have either a “P”, “Y”, “A”, “B”,
“C”, or “D” or nothing in the eleventh position of the serial
number. If there is no letter or an “A”, the product comes with a
(1) one year warranty. Products that have a “D” have a (2) two
year warranty. Products that have a “Y” or a “B” have a (3) three
year warranty, and products that have a “P” or a “C” have a (5)
five year warranty commencing from the date of installation. The
warranty time period for radiotelephone accessories and batteries
is as follows:
PCS portable telephone batteries 1 year
Carrying cases Defect free at time of shipment
Other radiotelephone accessories 1 year
Motorola, at its option, will, at no charge, either repair, replace,
or refund the purchase price of the PCS Subscriber
Radiotelephone Product during the warranty period, provided it
is returned in accordance with the terms of this warranty to the
Motorola National Service Center or Service Providers service
shop qualified by Motorola. Repair, at Motorola’s option, may
include the replacement of parts or boards with functionally
equivalent reconditioned or new parts or boards. Replaced parts
or accessories, batteries or boards are warranted for the balance
of the original time period. All returned accessories, batteries,
parts and PCS telephone equipment shall become the property of
Motorola.
II. Warranty Conditions:
This express limited warranty is extended by Motorola to the
original subscriber buyer or lessee only and is not assignable or
transferrable to subsequent subscriber buyers or lessees. This is
the complete warranty for PCS Subscriber Radiotelephone
Products by Motorola. Motorola assumes no obligation or liability
for additions or modifications to this warranty unless made in
writing and signed by an officer of Motorola. Unless made in
separate written agreement between Motorola and you,
Motorola does not warrant the installation, maintenance or
service of the equipment, accessories, batteries or parts.
Rechargeable batteries are warranted only if battery capacity falls
below 80% of rated capacity, or the battery develops leakage.
This warranty becomes void for all types of batteries if:
a. the batteries are charged by other than Motorola approved
battery chargers specified for the charging of the battery.
b. any of the seals on the battery are broken or show evidence of
tampering.
c. the battery is used in equipment or service other than the PCS
radiotelephone equipment for which it is specified.
Motorola cannot be responsible in any way for any ancillary
83
English
l1gs_us.bk : warrant.fm5 Page 84 Wednesday, August 25, 1999 11:19 AM
equipment not furnished by Motorola which is attached to or
used in connection with Motorola’s PCS Subscriber
Radiotelephone Products, or for operation of our equipment with
any ancillary equipment and all such equipment is expressly
excluded from this warranty. Furthermore, Motorola cannot be
responsible for any damage to Motorola equipment resulting
from the use of ancillary equipment not furnished by Motorola
for use with PCS subscriber equipment.
When the product is used in conjunction with ancillary or
peripheral equipment not manufactured by Motorola, Motorola
does not warrant the operation of the product/ peripheral
combination, and Motorola will honor no warranty claim where
the product is used in such a combination and it is determined by
Motorola that there is no fault with the Motorola product.
Motorola specifically disclaims any responsibility for any damage
caused in any way by the use of portable radiotelephone
accessories and peripherals (specific examples include, but are
not limited to: batteries, chargers, adapters, and power supplies)
when such accessories and peripherals are not manufactured or
supplied by Motorola. Motorola disclaims liability for range,
coverage, availability, or operation of the PCS System which is
provided by the Service Provider.
III. What This Warranty Does Not Cover:
(a) Defects or damage resulting from use of the product in other
than its normal and customary manner.
(b) Defects or damage from misuse, accident or neglect.
(c) Defects or damage from improper testing, operation,
maintenance, installation, adjustment, or any alteration or
modification of any kind.
(d) Breakage or damage to antennas unless caused directly by
defects in material or workmanship.
English
84
(e) Products disassembled or repaired in such a manner as to
adversely affect performance or prevent adequate inspection
and testing to verify any warranty claim.
(f) Products which have had the serial number removed or made
illegible.
(g) Defects or damage due to spills of food or liquid.
(h) All plastic surfaces and all other externally exposed parts that
are scratched or damaged due to customer normal use.
(i) Products rented on a month- to- month basis.
(j) The portable phone keypad assembly and displays are not
covered after the first year.
IV. How To Get Warranty Service:
To receive warranty service, present your equipment to the
facility described below, along with your bill of sale or
comparable substitute proof of sale or lease bearing the date of
purchase, transceiver serial number and place of purchase or
installation if applicable.
Warranty service is available by returning Motorola branded
Radiotelephone Products to a Motorola Service Center,
authorized in writing by a Motorola Area Service Manager to
perform warranty work on Motorola PCS Subscriber
Radiotelephone products. A Carrier or Distributor branded
Radiotelephone Product may be returned to either (a) the specific
service shop qualified by Motorola’s National Service Center in
writing and operated by or affiliated with the PCS Service
Provider, or (b) a Motorola Authorized PCS Service Center.
In most cases the service shop which sold your PCS
Radiotelephone and accessories will provide warranty service. If
you need additional information, contact that shop, the customer
service department of your Service Provider, or Motorola at the
l1gs_us.bk : warrant.fm5 Page 85 Wednesday, August 25, 1999 11:19 AM
address at the end of this document. The unit or accessories,
together with any detachable parts such as antennas, battery
packs, and chargers, must be delivered to a qualified Motorola
Service Center, or a Motorola- qualified service shop,
transportation and insurance prepaid. When sent or brought to
the servicer, the Radiotelephone Product must be accompanied
by your name, address, and telephone number, name of Service
Provider, and a description of the problem.
V. General Provisions:
This warranty sets forth our responsibilities regarding this
product. Repair, replacement or refund of the purchase price at
Motorola’s option, is your exclusive remedy. This warranty is
given in lieu of all other express warranties, implied warranties,
including without limitation implied warranties of merchantability
and fitness for a particular purpose, are limited to the duration of
this limited warranty. Further, as the Service Provider is not
controlled by Motorola, no warranty is made as to coverage,
availability or grade of service provided by the Service Provider. In
no event shall Motorola be liable for damages in excess of the
purchase price of the PCS radiotelephone product, for any loss of
use, loss of time, inconvenience, commercial damages arising out
of the use or inability to use such product, to the full extent such
may be disclaimed by law.
VI. Patent And Software Provisions:
Motorola will defend at its own expense, any suit brought
against you to the extent that it is based on a claim that the PCS
Subscriber Radiotelephone Product parts infringes a United States
patent, and Motorola will pay those costs and damages finally
awarded against you in any such suit which are attributable to
any such claim, but such defense and payments are conditioned
on the following:
(i) that Motorola will be notified promptly in writing by you of
any notice of such claim; and
(ii) that Motorola will have sole control of the defense of such suit
and all negotiations for its settlement or compromise; and
(iii) should the PCS Radiotelephone, accessory, battery or parts
become, or in Motorola’s opinion be likely to become the
subject of a claim of infringement of a United States patent
that you will permit Motorola, at its option and expense,
either to procure for you the right to continue using the PCS
Radiotelephone or parts or to replace or modify the same so
that it becomes non- infringing or to grant you a credit for
such PCS Radiotelephone or parts as depreciated and accept
its return. The depreciation will be an equal amount per year
over the lifetime of the PCS Subscriber Radiotelephone,
accessories, battery or parts as established by Motorola.
Motorola will have no liability to you with respect to any claim of
patent infringement which is based upon the combination of the
PCS Radiotelephone or parts furnished hereunder with software,
apparatus or devices not furnished by Motorola, nor will
Motorola have any liability for the use of ancillary equipment or
software not furnished by Motorola which is attached to or used
in connection with the PCS Radiotelephone. The foregoing states
the entire liability of Motorola with respect to infringement of
patents by the PCS Radiotelephone, accessories, batteries or any
parts thereof.
Laws in the United States and other countries preserve for
Motorola certain exclusive rights for copyrighted Motorola
software such as the exclusive rights to reproduce in copies and
distribute copies of such Motorola software. Motorola software
may be copied into, used in and redistributed with only the PCS
Subscriber Radiotelephone Product associated with such
85
English
l1gs_us.bk : warrant.fm5 Page 86 Wednesday, August 25, 1999 11:19 AM
Motorola software. No other use, including without limitation
disassembly, of such Motorola software or exercise of exclusive
rights in such Motorola software is permitted.
VII. State Law Rights:
Some states do not allow the exclusion or limitation of incidental
or consequential damages, or limitations on how long an implied
warranty lasts, so the above limitations or exclusions may not
apply to you.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
English
86
l1gs_us.bk : l1gs_us.IX Page 87 Wednesday, August 25, 1999 11:19 AM
Index
A
B
Accessories ..........................................77
Accessory setup menu ..........................68
Activate IR Port
Setting up .......................................17
Using ...............................................58
Add entry
To phone memory .................... 40, 73
To SIM card memory ................. 40, 72
Adjust Contrast ............................. 58, 74
Adjust ring volume ...............................56
Alert tones ...........................................57
Automatic answer ................................68
Automatic Handsfree ...........................68
Automatic lock .....................................57
Automatic redial ..................................26
Auxiliary alert .......................................69
Available networks ...............................62
Bar incoming calls ................................49
Bar outgoing calls ................................48
Batteries
Charging .........................................18
Desktop charging ............................21
Fitting ..............................................19
Low battery warning .......................18
Maintaining .....................................18
Removing ........................................19
Battery charge indicator .......................16
Battery meter ................................ 45, 72
Battery saving mode .............................60
Blocked message ........................... 25, 59
Buttons
Smart button ...................................15
Volume ...........................................15
C
Call charge settings ..............................66
Call forwarding ............................. 46, 72
Call holding .........................................31
Call metering .......................................65
Call meters menu .................................65
Call related features menu ...................45
Call timers ............................................66
Call Transfer .........................................34
Call Voicemail ......................................51
Call waiting ..........................................31
Calling a number .................................26
Cancel all forwarding .................... 48, 72
Capacity
Checking battery capacity ................45
Checking Phone Book capacity ........40
Cell broadcast ......................................54
Battery saving mode ........................60
Messages ........................................51
Change bar password ..........................49
Change SIM PIN2 code ........................59
Change unlock code ............................57
Characters ...........................................38
Charge meters
Resetting .........................................66
Check capacity (of the Phone Book) .....40
Communications
Infra-Red ............................17, 58, 72
RS-232 Serial Data ...........................17
Conference Call ...................................31
Call Waiting ....................................34
End Active And Held ........................31
Hold Call .........................................30
Make a New Call .............................30
Reconnect .......................................31
Reconnect Held Call ........................31
Restrict My Number .........................30
Split Call ..........................................31
Switch Calls .....................................31
Contrast
Adjust Contrast ........................ 58, 74
adjusting .........................................74
Index
87
English
l1gs_us.bk : l1gs_us.IX Page 88 Wednesday, August 25, 1999 11:19 AM
D
F
K
Delete
Last ten calls ................................... 42
Message ...................................52, 53
Phone book entries ......................... 40
Desktop charging of your battery ........ 21
Detailed forwarding ............................ 47
Dialing phone book numbers .............. 27
Display ................................................ 16
Adjusting the contrast ..............58, 74
Display characters ................................ 38
Displaying your own
phone number ............................. 42
DTX ..................................................... 60
Fault finding .................................. 79, 81
Find entry by location .................... 39, 73
Find entry by name ........................ 39, 71
Find new network ................................64
Fitting your battery ...............................19
Fixed dialing .........................................43
Calling numbers ..............................43
Setting .............................................43
Flip .......................................................15
Forward
Cancelling .......................................48
Fax calls ...........................................47
Key Answer Only ..................................49
E
Handsfree On/Off .................................30
Headset
Making and receiving calls ...............15
Hold Call ..............................................30
Earpiece connector .............................. 17
Editing messages ................................. 51
Emergency calls ................................... 28
Ending a phone call ............................. 29
Entering characters .............................. 38
Erase name and number ...................... 40
Extended menus ..............................5, 60
English
88
Index
H
I
In use symbol .......................................16
Infra-Red ................................ 17, 58, 72
Initiating Transfer Call ..........................34
International phone calls ......................27
L
Language selection ..............................60
Last Calls Received ...............................41
Add to Phone Memory ....................42
Add to SIM Card Memory ................42
Time and Date .................................41
Last ten calls ................................. 41, 72
Lifetime timer .......................................67
Lock now ...................................... 57, 72
Locking the keypad ..............................25
Low battery warning ............................18
l1gs_us.bk : l1gs_us.IX Page 89 Wednesday, August 25, 1999 11:19 AM
M
N
P
Making a phone call .............................26
Master clear .........................................61
Master reset .........................................61
Menus
Accessory setup menu .....................68
Call meters menu ............................65
Call related features menu ...............45
Extended menu .................................5
Messages menu ...............................50
Network selection menu ..................62
Options menu .................................35
Personalized menus ...........................5
Phone Book menu ...........................36
Phone setup menu ..........................55
Quick Access menu ..........................71
Send Messages menu ......................53
Short menu .......................................5
Message editor ............................. 53, 72
Message settings ..................................54
Messages
Call holding/call
waiting messages ..........................32
Cell broadcast messages ..................51
Creating and editing ........................51
Reading SMS messages ....................51
Sending SMS messages ....................53
Messages menu ...................................50
Mute Button ........................................16
My phone number(s) ............................42
Names
Entering ..........................................38
Network search ....................................63
Network selection menu ......................62
Networks
Automatic search ............................63
Finding new networks .....................64
Manual search .................................63
New security code ................................59
Pauses
Inserting into phone numbers ..........27
Personal numbers ................................39
Personalized menu .................................5
Phone book
Call number ....................................40
Capacity ..........................................37
Deleting/erasing entries ...................40
Dialing phone book numbers ...........27
Modify name or number ..................40
Preventing access to ........................40
Storing numbers
- see Add Entry .............................40
Phone calls
Automatic redial ..............................26
Dialing phone book numbers ...........27
Emergency calls ...............................28
Ending ............................................29
International ....................................27
Making ...........................................26
One-touch dialing ............................27
Receiving .........................................29
Phone setup menu ...............................55
Phone status ........................................61
PIN code
Entering ..........................................25
Setting and changing ......................58
PIN2 code ............................................59
Postscripting ........................................37
Prevent access (to Phone Book) ............40
O
One-touch dial setting ..........................44
One-touch dialing ......................... 27, 73
Options menu ......................................35
Outgoing messages ....................... 53, 73
Index
89
English
l1gs_us.bk : l1gs_us.IX Page 90 Wednesday, August 25, 1999 11:19 AM
Q
Quick access menu .............................. 71
Customizing ................................... 75
R
Reading SMS messages ....................... 51
Received messages .............................. 52
Receiving a phone call ......................... 29
Redialing the last number called .......... 26
Removing your battery ........................ 19
Require SIM card PIN ........................... 58
Restrict My Number ............................. 30
Restrict my phone number ............46, 73
Return call ........................................... 52
Ring or vibrate ..................................... 56
Ring tones ........................................... 56
S
Safety timer ......................................... 69
Screen
adjusting the contrast ..................... 74
Security code
Changing ....................................... 59
Select Phone Line ................................ 56
Sending SMS messages ....................... 53
Service center ...................................... 54
Set in-call display ................................. 66
Set Message Alert Tone ....................... 57
Set Ringer Tone ................................... 56
Set Ringer Tone 2 ................................ 57
Set Time and Date ............................... 60
Set Time Format .................................. 60
English
90
Index
Setup fixed dialing ................................43
Short menu ............................................5
Short message service symbol ...............16
Show battery meter ....................... 45, 72
Show call timers ............................ 65, 72
Show Services ......................................41
Show Time and Date ............................60
Signal strength symbol .........................16
SIM card
Insertion/removal .............................23
PIN code ................................... 25, 58
PIN2 code ........................................59
Smart button ........................................15
SMS messages ......................................50
Special keys ..........................................15
Split Call ...............................................31
Status indicator ....................................17
Battery saving mode ........................60
Status review ........................................61
Switch Calls ..........................................31
Symbols ...............................................16
U
Unblocking your phone ........................59
Unconditional call forwarding ..............72
Unlock code
Setting and changing ......................57
V
VibraCall ....................................... 56, 72
Voicemail
Number ...........................................54
Volume
Adjusting the earpiece and keypad
volume ..........................................15
Adjusting the ringer volume .............56
Button .............................................15
W
What to do if... ............................. 79, 81
T
Timers ..................................................66
Tones
Setting alert tones ...........................57
Setting ringer tones .........................56
Transfer Call .........................................34
Troubleshooting ............................ 79, 81
Turn Mute On or Off ............................31
68P09426A38