+
Manufactured under license
from Dolby Laboratories.
Dolby and the double-D
symbol are trademarks of
Dolby Laboratories.
HDMI, the HDMI logo and
High-Definition Multimedia
Interface are trademarks or
registered trademarks of
HDMI Licensing LLC.
TU-T2HR32_GB.indd 1
Important: This product can only receive Digital Terrestrial TV
signals, subject to coverage an aerial upgrade may be required.
Text your postcode followed by your house name or number to
83331* or go to www.freeview.co.uk/availability (*Costs no more
than a normal text).
1
2
Read this operation manual carefully.
If you still encounter a problem, please call our service help
line on 0845 880 0421 during normal weekday office hours.
29/06/2010 15:10:58
ENGLISH
• The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The examples used throughout this manual are based on the TU-T2HR32 model.
Dear SHARP customer
ENGLISH
OPERATION MANUAL
Thank you for your purchase of the SHARP Digital Terrestrial HD Recorder. To ensure safety and many years of troublefree operation of your product, please read Important safety precautions carefully before using this product.
Contents
Contents ...................................................................... 2
Introduction................................................................. 3
Important safety precautions ................................. 3
Remote control unit .............................................. 4
Recorder (front view) ............................................. 5
Recorder (rear view) .............................................. 5
Preparation.................................................................. 6
Supplied accessories ............................................ 6
Inserting the batteries............................................ 7
Using the remote control unit ................................ 7
Quick guide ................................................................. 8
Initial installation overview...................................... 8
Before turning on the power ................................. 9
Initial auto installation ............................................ 9
Watching TV .............................................................. 10
Daily operation .................................................... 10
Channel List ........................................................ 11
Selecting a programme using the EPG................ 12
Digital text ........................................................... 13
Recording TV ............................................................ 14
Recording a programme ..................................... 14
Playing a recorded programme ........................... 14
Library ................................................................ 14
Connecting external devices ................................... 15
Video connections .............................................. 15
Audio connections .............................................. 17
Menu operation......................................................... 18
What is the MAIN MENU? ................................... 18
Basic adjustment ...................................................... 19
AV Settings ......................................................... 19
Languages .......................................................... 21
Parental Control .................................................. 22
Freeview+ ........................................................... 23
General ............................................................... 24
Library ................................................................ 26
Scheduled Recordings ........................................ 26
Appendix ................................................................... 27
Troubleshooting .................................................. 27
Specifications ..................................................... 28
PIN CODE reminder ............................................ 29
Trademarks ......................................................... 29
End of life disposal .............................................. 30
Digital Switchover and Your TV Equipment.......... 31
2
TU-T2HR32_GB.indd 2
29/06/2010 15:15:50
Introduction
Important safety precautions
• Cleaning—Unplug the AC power adapter from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do
not use liquid cleaners or aerosol cleaners.
• Use a soft damp cloth to gently wipe the product when it is dirty. To protect the product, do not use a chemical cloth to clean it.
Chemicals may cause damage or cracks in the casing of the product.
• Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in
a wet basement.
• Do not place vases or any other water-filled containers on this product. The water may spill onto the product
causing fire or electric shock.
• Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product
to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, or
table recommended by the manufacturer or sold with the product.
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive
force and uneven floor surface can cause the product to fall from the cart.
• Ventilation—The vents and other openings in the casing are designed for ventilation. Do not cover or block
these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the
product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation
openings. This product is not designed for built-in installation; do not place the product in an enclosed place
such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are
followed.
• Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heatgenerating products (including amplifiers).
• To prevent fire, never place any type of candle or naked flames on the top or near the product.
• To prevent fire or shock hazard, do not place the AC power adapter under the product or other heavy items.
• The product uses power even in Standby. Unplug the product from the AC outlet when you are not using it.
• Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage
and other dangerous conditions. Request a qualified person to perform servicing.
TU-T2HR32
HD
+
TU-T2HR32
HD
+
Devices connected to the protective earthing of the building installation through the MAINS connection or through other devices with a
connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire
hazard. Connection to a television distribution system therefore has to be provided through a device providing electrical isolation within a
certain frequency range (galvanic isolator, see EN 60728-11).
NOTE
• For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can be connected to
television distribution systems.
3
TU-T2HR32_GB.indd 3
29/06/2010 15:15:50
Introduction
Remote control unit
1
MUTE
Volume on/off.
2
NUMERIC BUTTONS
Set the channel
Enter desired numbers
Set the page in Digital Text Mode.
1
3
REC
Record selection (Page 14).
4
PLAYBACK NAVIGATION
Play, Pause, Stop, Fast Fwd
Fast Rwd, Skip Fwd, Skip Rwd.
2
5
CURSOR
Select a desired item on the “MENU” screen (Page 18).
3
6
GUIDE
Display the EPG.
7
VOLUME
Increase/decrease the volume (Page 10).
8
MENU
“MENU” screen on/off (Page 18).
9
BACK
Return to the previous “MENU” screen.
MUTE
1
4
7
REC
15
16
LIBRARY
2
5
8
0
3
6
9
LAST
17
4
0 TEXT
Display Digital Text (Page 13).
Q SUBT
Switch subtitles on/off (Page 21).
W AD
Switch Audio Description on/off (Page 21).
E A/V
Switch to HDMI output or SCART output (Page 10).
OK
5
6
+
GUIDE
+
R HDMI
Hold this button down for 5 seconds to revert the output
to 1080i (Page 19).
7
T LIBRARY
Display “LIBRARY” information (Page 26).
8
9
BACK
INFO
19
10
TEXT
EXIT
20
11
12
AD
AUDIO
22
WIDE
23
Y STANDBY/ON
Switch between Standby and On (Page 10).
U LAST
Toggle between the current channel and the previous
channel (Page 10).
I PROG
Select the programme.
O INFO
Display programme information (Page 10).
VOL
PROG
–
18
–
MENU
21
13
14
A/V
SUBT
HDMI
P EXIT
Exit the “MENU” screen.
A COLOUR BUTTONS
The colour buttons are correspondingly used to select
the coloured item on the screen e.g. Digital Text.
S AUDIO
Select the desired audio language.
D WIDE
Select a wide mode (Page 19).
4
TU-T2HR32_GB.indd 4
29/06/2010 15:15:51
Introduction
Recorder (front view)
1
2
TU-T2HR32
a (Power button)
Display
HD
+
1
2
Recorder (rear view)
1
2
RF IN
RF OUT
3
4
5
TV
SPDIF
USB
6
DOLBY
DC 12V DC
HIGH DEFINITION MULTIMEDIA INTERFACE
ETHERNET
7
HDMI
8
VCR
9
OPTICAL
RS-232
10
11
-
+
12
IN
RF IN (Antenna in) terminal
RF OUT (Antenna out)
terminal
3 TV (SCART) terminal
4 SPDIF (Digital audio
output) terminal
5 USB terminal - (For
service only)
6 Cooling fan outlet
7 Ethernet terminal
8 HDMI terminal
9 VCR (SCART) terminal
10 Optical (infra red) terminal
11 RS232 terminal - (For
service only)
12 12V DC terminal
1
2
5
TU-T2HR32_GB.indd 5
29/06/2010 15:15:51
Preparation
Supplied accessories
Remote Control Unit ( x 1)
MUTE
1
4
7
REC
Power Adaptor ( x 1)
RF Cable ( x 1)
Page 9
Page 9
LIBRARY
2
5
8
0
3
6
9
LAST
OK
+
GUIDE
VOL
+
PROG
–
–
MENU
BACK
INFO
TEXT
EXIT
AD
A/V
SUBT
MENU
AUDIO
WIDE
Page 4
• Operation manual (this publication)
• “AAA” size zinc-carbon battery (x2) Page 7
6
TU-T2HR32_GB.indd 6
29/06/2010 15:15:52
Preparation
Inserting the batteries
Before using the Recorder for the first time, insert the two supplied “AAA” size zinc-carbon batteries. When the batteries
become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
Insert the two supplied “AAA” size zinccarbon batteries.
-
1
2
• Place batteries with their terminals corresponding to the
(e) and (f) indications in the battery compartment.
3
Close the battery cover.
+
+
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old
batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical leakage,
wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
• When replacing the batteries, use zinc-carbon batteries instead of alkaline ones.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household rubbish.
Deposit any used batteries free of charge into the designated collection containers set up at commercial businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the
front of the Recorder. Objects between the remote
control unit and sensor may prevent proper operation.
TU-T2HR32
HD
+
Remote control sensor
MUTE
1
4
7
REC
LIBRARY
2
5
8
0
3
6
9
LAST
OK
+
GUIDE
VOL
+
PROG
–
–
MENU
BACK
INFO
TEXT
AD
A/V
EXIT
SUBT
MENU
AUDIO
WIDE
Cautions regarding the remote control unit
• Do not expose the remote control unit to shock. In addition, do not expose the remote
control unit to liquids, and do not place in an area with high humidity.
• Do not place the remote control unit under direct sunlight. The heat may cause
deformation of the unit.
• The remote control unit may not work properly if the remote control sensor of the Recorder
is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or
the Recorder, or operate the remote control unit closer to the remote control sensor.
TU-T2HR32
HD
+
MUTE
LIBRARY
1
2
3
4
5
6
7
8
REC
0
9
LAST
OK
+
VOL
GUIDE
+
PROG
–
MENU
–
BACK
INFO
TEXT
EXIT
AD
SUBT
A/V
MENU
AUDIO
WIDE
7
TU-T2HR32_GB.indd 7
29/06/2010 15:15:53
Quick guide
Initial installation overview
Follow the steps below one by one when using the Recorder for the first time.
Run the
initial
settings
Preparation
n Connect the antenna cable to
the RF IN terminal (Page 9).
n Turn on the power using the a
button on the Recorder
(Page 10).
o Run the first time installation
Watch TV
n Congratulations!
Now you can watch TV.
o If necessary, adjust the antenna
to attain maximum signal
reception.
(Page 9).
RF IN
RF OUT
✔
ETHERNET
o Connect the Recorder to your TV
Ensure the antenna is
connected
First Time Installation
using the supplied HDMI cable
(Page 9).
n Connect external devices
Please ensure that an aerial is connected
Then press
DOLBY
IN
RF OUT
TV
OK
to scan for services
USB
SPDIF
DC 12V DC
IN
HIGH DEFINITION MULTIMEDIA INTERFACE
ETHERNET
HDMI
VCR
OPTICAL
RS-232
-
Connect external
devices
+
such as a DVD player/
recorder as instructed
(Page 15).
TU-T2HR32
HD
+
✔
Press OK to continue
o Connect external audio
HDMI
L
Y
R
2-CH AUDIO OUT
COAXIAL
CB/PB
CR/PR
Start searching
channels
devices such as speakers/
amplifier as instructed
(Page 17).
VIDEO
S-VIDEO
VIDEO OUT / DIGITAL AUDIO OUT
p Connect the power adapter to
the Recorder (Page 9).
TU-T2HR32
HD
+
8
TU-T2HR32_GB.indd 8
29/06/2010 15:15:54
Quick guide
Before turning on the power
n
DOLBY
RF IN
RF OUT
TV
USB
SPDIF
DC 12V DC
IN
HIGH DEFINITION MULTIMEDIA INTERFACE
ETHERNET
HDMI
VCR
OPTICAL
RS-232
o
-
+
p
n Connect the antenna (standard DIN45325 plug (IEC 169-2)
Place the TV close to the AC outlet,
and keep the power plug within
reach.
75 q coaxial cable)
o Connect the HDMI cable
p Connect the power adapter
Initial auto installation
When the Recorder is powered on for the first time after purchase, the first time installation screen appears. Follow the
on-screen instructions to search for all available channels.
Confirm the following before turning on the power
E Is the antenna cable connected?
E Is the power adapter connected and plugged in?
E Is the HDMI cable connected between the Recorder and your TV?
1
Press a on the Recorder.
2
3
Ensure the antenna cable is connected.
• The first time installation screen is displayed.
First Time Installation
Press OK to start the channel search.
• The Recorder will search for, sort and store all
receivable channels.
Please ensure that an aerial is connected
Then press
OK
to scan for services
NOTE
• The first time installation process will be aborted if the
Recorder is left unattended for more than 30 minutes before
searching for channels.
• After the first time installation has been completed, the
default PIN is automatically set to ‘0000’. To change the PIN
setting, refer to Page 22.
9
TU-T2HR32_GB.indd 9
29/06/2010 15:16:15
Watching TV
Daily operation
Changing channels
Switching on/off
With PROG +/-:
1
+
Standby mode
GUIDE
VOL
E Select standby mode
6
5
9
8
REC
LAST
0
INFO
Switching between channels
Switch between the current channel and the previous
channel by pressing LAST. Each press of the LAST
button will toggle between the current channel and the
previous channel.
Programme information
NOTE
• If you are not going to use this Recorder for long periods of
time, be sure to remove the power adapter from the supply.
(Page 9).
• A small amount of electric power is still consumed with the
Recorder in standby mode.
3
2
–
BACK
E Switching on from standby
LIBRARY
7
MENU
If the Recorder is switched on, you can switch it to
standby by pressing a on the remote control unit.
MUTE
4
+
PROG
–
From standby, press a on the remote control unit.
With 0_9:
1
Press the INFO button once to display times,
channel, programme, start and finish dates.
2
Press the INFO button again to display
additional information about the current
programme.
Adjusting the volume
VOL
Press the VOL+ button to increase the volume and the
VOL- button to decrease the volume.
PROG
–
–
MENU
BACK
INFO
TEXT
EXIT
Selecting a video output source
Once the Recorder is connected to your TV using either
a HDMI cable or SCART cable, you can select the
appropriate output source by pressing A/V on the remote
control unit.
Selecting an audio language
Some programmes are broadcast with multiple audio
channels. Press AUDIO to display the audio menu.
INFORMATION
Audio Channel
Select the audio channel that you want to use.
ENG
Stereo
ENG
Stereo
Up
1
2
Down
OK
Select
Exit
Exit Menu
Press a/b to select the desired channel.
Press OK to confirm the audio channel.
10
TU-T2HR32_GB.indd 10
29/06/2010 15:16:16
Watching TV
Channel List
Basic operation
E Display/close the Channel guide
1
2
3
Press Menu.
Press a/b to select channels setting.
Press OK.
VOL
PROG
–
–
1
Press a/b to select the channel you want
to lock.
2
Press the RED coloured button. A screen is
displayed requesting a PIN entry. Enter a
4-digit code, then press .
NOTE
• If parental controls are enabled (Page 22), the parental settings
PIN must be entered before a channel can be locked/unlocked.
• To unlock a channel, select the channel using the a/b buttons
and press the RED coloured button. Enter the PIN, then press
EXIT.
3 Set a channel as a favourite
You can set a channel as a favourite for
quick access. All favourite channels will be
displayed in the favourites list.
MENU
BACK
INFO
Channels
1
Press a/b to select the channel you want to
add to the favourites list.
2
Press the GREEN coloured button.
• The favourites list will be shown listing all favourite
channels and the channel you have just added.
All Channels
001
BBC 1
002
BBC 2
003
ITV1
004
CHANNEL 4
005
FIVE
006
ITV2
007
BBC THREE
008
BBC FOUR
009
ITV3
3
Press c to return to the channel list.
NOTE
• To delete a channel from the favourites list, press the YELLOW
coloured button. You can choose to delete the channel or
cancel.
4 Deleting a channel
OK
Watch
1
EXIT
Exit Menu
Lock
Add Fav
Delete
Show Favs
2 3 4 5
GUIDE
Guide
6
E Navigating the Channel guide
1 Select a channel
Press a/b to select a channel. Press OK to
watch the current programme.
Useful functions
1
Press a/b to select the channel you want to
delete.
2
Press the YELLOW coloured button.
• The delete channel screen will be displayed. You can
choose to delete the channel or cancel.
NOTE
• To view a channel once it has been deleted, you will need to
perform a first time installation (Page 9).
5 Viewing the Favourites List
1
Press d to view the favourites list
• While viewing the favourite list, you can select and watch
channels in the same way as the Channel List.
2 Press c to return to the channel list.
6 View the EPG
2 Lock a channel
You can lock a channel to prevent children
viewing scenes of a violent or sexual nature.
1
To view the EPG (Page 12), press the GUIDE
button.
PIN Required
You have chosen to lockunlock a channel
- - - -
Please enter the PIN
0
9
Enter PIN
EXIT
Exit
11
TU-T2HR32_GB.indd 11
29/06/2010 15:16:18
Watching TV
Selecting a programme using the
EPG
Watch a programme
3 Watch a programme now
Basic operation
1
2
E Display/close the EPG screen
Press a/b to select a programme.
Press OK to watch the programme.
Set a reminder
Press GUIDE.
Set a reminder for a programme
+
+
GUIDE
VOL
PROG
1
1
5
9.00pm - 10.00pm
2/5. Clare Baldingpresents day two of Royal Ascot. The feature race is The Pronce of Wale’s Stakes at
3:50pm. Willie Carson and Rishi Persad are on hand with news and interviews. [S]
[SPORT]
SUB
S
4:000pm
MOTD Live : Spain vSwitzerland
Royal Ascot
Midsummer Murders
Count Deal or No Deal
Wed 16 Jun
001 BBC ONE
002 BBC TWO
003 ITV1
004 Channel 4
005 FIVE
006 ITV2
007 BBC THREE
009 BBC FOUR
Little Girl Lost
Loose Women
This is BBC Three
This is BBC Three
5:00pm
6:00pm
R
The Weakest Link
The Hairy Bikers’ Food Tour of
The Chase
The 5 o’clock Show
Neighbours
Five News
2
Press OK. A clock icon will be shown next to
the selected programme.
• If you set a reminder, just before the programme start time,
a message will appear reminding you that the programme is
about to start. You can choose to automatically switch channels
or cancel the reminder.
EPG recommendations
Programme Guide
Springwatch 2010
8:00pm - 9:00pm
Chris Packham, Kate Humble and Simon King have the latest on the Springwatch animal dramas. In Dorset,
Simon heads beneath the waves for a live dive. [S]
Judge Judy
The Ricki Lake Show
Press a / b/ c / d to select a future
programme.
NOTE
Programme Guide
Royal Ascot
1
I
OK
Watch
Exit
Exit Menu
3
-2 Hrs
+2 Hrs
-24 hrs
+24 hrs
R
Record
LIB
Library
2 2 2 2
E Select a programme
Wed 16 Jun
001
002
003
004
005
006
007
009
OK
BBC ONE
BBC TWO
ITV1
Channel 4
FIVE
ITV2
BBC THREE
BBC FOUR
Reminder
EXIT
Recording Recommendation
INFORMATION
10:00pm
Your selected programme recommends the following programme is
recorded.
Springwatch Unsprung
Accept this recommendation?
OK
Exit Menu
- 2 Hrs
+ 2 Hrs
Accept
- 24 Hrs
EXIT
Exit Menu
+ 24 Hrs
R
Record
LIB
Library
1 Select the desired programme
Press a/b to select the desired programme.
• If a or b are displayed on the left of the services,
continue to Press a / b to display the next or previous
screen.
Useful functions
2 Navigate the time span
1
Press the RED coloured button to move
backwards 2 hours.
2
Press the GREEN coloured button to move
forwards 2 hours.
3
Press the YELLOW coloured button to move
backwards 24 hours.
4
Press the BLUE coloured button to move
forwards 24 hours.
When you press the REC button on the EPG to
record an event, the receiver will check if there is a
recommendation for that event.
If there is a recommendation for the event, the receiver
will ask you if you want to accept the recommendation.
If you accept the recommendation, it will be scheduled
for recording as well as the original event in the EPG on
which REC was pressed.
If you do not accept the recommendation (by pressing
BACK or EXIT), only the original event in the EPG on
which REC was pressed will be scheduled.
Pressing EXIT will exit the menu without booking the
item.
12
TU-T2HR32_GB.indd 12
29/06/2010 15:16:19
Watching TV
Buttons for digital text operation
Trailer bookings
Buttons
When the receiver detects a trailer booking suggestion is
being broadcast, it will raise the following menu:
Book Me
Description
a / b/ c / d
Navigate the digital text index page and
menu system
Coloured
buttons
Access digital text shortcuts. These are
often displayed on the bottom of the page.
Numeric
buttons 0_9
Directly select a page.
EXIT / TEXT
Exit digital text.
This menu consists of an icon on the screen, indicating
that you can press the GREEN coloured button to invoke
the trailer booking menu. The icon menu will disappear
automatically if you do not press the GREEN coloured
button and the broadcast is no longer signalling the trailer
booking suggestion.
If you do press the GREEN coloured button, the receiver
will show the following menu:
Booking
Four Promo event name (eng)
Eight Promo event name (eng)
OK
Book Item
EXIT
Four Promo event name (eng)
Exit Menu
This menu allows you to select the item to book.
Pressing OK will book the item, placing it in the
scheduled recordings list.
Pressing EXIT will exit the menu without booking the
item.
Digital text
What is digital text?
Some channels are broadcast with digital text which
contains pages of information and entertainment. News,
weather, sports information, stock exchange prices and
programme previews are among the many services.
Accessing digital text
1
2
Select a channel which broadcasts digital text.
Press TEXT or the RED button.
• Not all channels broadcast digital text.
• You may not be able to receive digital text if you have a
poor quality signal.
13
TU-T2HR32_GB.indd 13
29/06/2010 15:16:20
Recording TV
Recording a programme
Playing a recorded programme
Record a programme now
Play a recorded programme
Press the REC button on the remote control.
A message will appear briefly to confirm the current
recording operation for the selected programme.
1
From the Library (see Page 26),
pressa / b/ c / d on the remote control to
select a programme you want to watch.
NOTE
2
If the programme has not yet been watched,
it will start playback from the start of the
recording.
3
If part of the programme has already been
watched, the following screen appears:
• The programme being recorded will appear in the Library (see
Page 26).
Record a future programme
1
2
3
.
Press GUIDE.
Press a / b/ c / d to select a programme.
i
Press the REC button on the remote control.
A black record icon will appear next to the
selected programme title.
4
Press Blue to watch from the start, or OK to resume playback.
!
WARNING
Restart
4
It is possible to record or schedule two individual
programmes at the same time. If you select more than
two recordings, you will see an error message:
Resume Playback
You have already watched part of this programme.
The scheduled recording will appear in the
library where it can be edited/deleted (see
Page 26).
Record multiple/alternative
programmes
INFORMATION
OK
Exit
Resume
Exit Menu
Make your selection using the buttons on the
remote control.
Stop a recorded programme
To stop playback of a recorded programme, press the
STOP button on the remote control (see Page 4).
Recording Clash
Your Freeview+ DTR is already recording two different channels.
What would you like to do?
Library
Record ‘South Africa Walks’ Ehen on Thur 00:20
Switch Recording of ‘Coronation Street’ to Thur 00:10
Library details
Switch Recording of ‘Channel 4 News’ to at 20:00
OK
1
2
Select
Exit
Exit Menu
Press a / b/ c / d on the remote control to
highlight one of the three options.
Press OK. The screen returns to normal
viewing.
The Library shows a list of the programmes previously
recorded and/or currently being recorded (see Page 26).
Library
Wed 16 Jun 2010
2:38pm - 2:39pm
BBC ONE
MOTD Live: Spain v Switzerland
Gary Lineker introduces live coverage from Durban. Spain are favourites
to win a first-ever World Cup. Switzerland are appearing in their ninth
finals. Also in HD. [S]
AD
001 BBC ONE
Breakfast
Deal or No Deal
The Simpsons
EastEnders
Escape to the Country
Royal Ascot
MOTD Live: Spain v Switzerland
Stop
GUIDE
Guide
SUB
Channel 4
BBC ONE
BBC ONE
15/06
15/06
15/06
15/06
16/06
68% Remaining
Recorded
Viewed
Recorded
Failed
Recorded
BBC ONE
BBC ONE
16/06
16/05
Recorded
Recorded
BBC ONE
Channel 4
Protect
Schedule
Preview
Delete
OK
Select
EXIT
Exit Menu
14
TU-T2HR32_GB.indd 14
29/06/2010 15:16:20
Connecting external devices
E Before connecting ...
• Be sure to turn off the Recorder and any external equipment before making connections.
• Firmly connect a cable to a terminal or socket.
• Carefully read the operation manual of each external device for possible connection types. This also helps you get the best audiovisual
quality to maximise the potential of the Recorder and the connected device.
NOTE
• The cables illustrated in Pages 15 to 17 are commercially available items.
Video connections
HDMI connection
Example of connectable devices
E HD Ready TV
The HDMI connection permits digital video and audio transmission via a connection cable to a TV. The digital picture
and sound data are transmitted without data compression and therefore lose none of their quality. Analogue to digital
conversion is no longer necessary in any connected devices, which would also result in quality losses.
DOLBY
RF IN
RF OUT
TV
USB
SPDIF
DC 12V DC
IN
HIGH DEFINITION MULTIMEDIA INTERFACE
ETHERNET
HDMI
VCR
OPTICAL
RS-232
-
+
n
n HDMI-certified cable
15
TU-T2HR32_GB.indd 15
29/06/2010 15:16:21
Connecting external devices
SCART connection
Example of connectable devices
E HD Ready TV
E DVD Recorder
DOLBY
RF IN
RF OUT
TV
USB
SPDIF
DC 12V DC
IN
HIGH DEFINITION MULTIMEDIA INTERFACE
ETHERNET
HDMI
L
Y
R
2-CH AUDIO OUT
COAXIAL
CB/PB
HDMI
VCR
OPTICAL
RS-232
-
+
CR/PR
VIDEO
S-VIDEO
VIDEO OUT / DIGITAL AUDIO OUT
SCART OUTPUT
16
TU-T2HR32_GB.indd 16
29/06/2010 15:16:22
Connecting external devices
Audio connections
SPDIF connection
Example of connectable devices
E Dolby Digital Surround Sound System
DOLBY
RF IN
RF OUT
TV
USB
SPDIF
DC 12V DC
IN
HIGH DEFINITION MULTIMEDIA INTERFACE
ETHERNET
HDMI
VCR
OPTICAL
RS-232
-
+
AUDIO INPUT
CD
VCR
DIGITAL INPUT
TV
COAX 1
OPTICAL
L
R
COAX 2
+
_
FR
FL
C
RL
SPEAKER OUTPUT
POWER
RR
FUSE
T2AL/250V
ON
OFF
AC 230V - 50Hz
E After connecting
Digital audio output setting
After connecting to a surround sound system with a SPDIF cable, you should set an audio output format compatible
with the programme you are watching or the device connected.
17
TU-T2HR32_GB.indd 17
29/06/2010 15:16:23
Menu operation
What is the MAIN MENU?
• You need to call up the on screen display (OSD) to perform settings for the Recorder. The OSD for the settings is called “MAIN MENU”
• The “MAIN MENU” enables various settings and adjustments.
Basic operation
Display the MAIN
MENU screen
Selecting a menu or
sub menu
OK
Press @ and the “MAIN MENU”
screen displays.
Main Menu
+
Programme Guide
Channels
Exit
–
MENU
Scheduled Recordings
Watch
+
PROG
–
Library
OK
GUIDE
VOL
BACK
INFO
TEXT
EXIT
Exit Menu
Press a/b to select one of the main
menu options. Press d to display the
option. Press a/b to select one of
the sub menus. Press c/d to display
the sub menu. Press c/d to adjust
the desired setting and then press ;.
Press BACK to return to the previous
menu.
Selecting a sub-menu in the
MAIN MENU
OK
Settings
AV Settings
OK
Languages
Parental Control
Exit the MAIN MENU
screen
Freeview +
HDMI Video
720p
HDMI Audio
SCART Output
Screen Size
Menu Transparency
Channel Change Timeout
Audio Desacription Volume
Audio Delay Settings
General
OK
Press EXIT to exit the MAIN MENU at
any time. If you have not pressed ;
before exiting, the desired setting will
not be changed.
Select
Exit
Exit Menu
Selecting and adjusting options
Settings
AV Settings
HDMI Video
Languages
1080p
HDMI Audio
SCART Output
OK
Parental Control
Screen Size
Menu Transparency
Freeview +
Channel Change Timeout
Audio Desacription Volume
General
OK
Select
Exit
Audio Delay Settings
Exit Menu
About the guide display
The guide display at the bottom of the MAIN MENU
screen shows operations with the OSD.
• The guide display is an operational guide for the remote control
unit. The bar will change in accordance with each sub-menu
and menu setting.
•
OK
Select
Exit
Exit Menu
Main Menu Options
The MAIN MENU allows you access to
various menu screens.
Item
Programme Guide
View the EPG (Page 12).
Channels
View the Channel List (Page 11).
Library
View the Library (Page 26).
Scheduled
Recordings
View the Scheduled Recordings
(Page 26).
Settings
Adjust various settings for the Recorder
(Page 19).
Information
View system and software information
for the Recorder.
18
TU-T2HR32_GB.indd 18
29/06/2010 15:16:24
Basic adjustment
AV Settings
AV Settings
SCART Output
Settings
AV Settings
Default Recording Mode
Adjusts the video signal type when the Recorder is
connected to your TV using a SCART cable.
Add to Start of Recording
Languages
Item
Add to End of Recording
Live Pause Length
Parental Control
RGB
This selects an RGB video signal type.
The video signal will be splits the video
output into separate red, green and
blue signals to provide the best picture
quality.
Composite
This selects a composite video signal.
Produces a single composite video
signal which provides poor picture
quality.
Skip Forwards Time
Skip Backwards Time
Freeview +
Auto Disk Management
Show Available Space As
General
OK
Select
Exit
Format Hard Disk Drive
Exit Menu
AV Settings
HDMI Video
NOTE
• If your TV is not compatible with RGB signals, select the
Composite video output.
Adjusts the video resolution when the Recorder is
connected to your TV using a HDMI cable. This allows
you to watch High Definition (HD) TV.
AV Settings
Screen Size
Item
576p
Sets the video resolution to 576p.
720p
Sets the video resolution to 720p.
1080i
Sets the video resolution to 1080i.
1080p
Sets the video resolution to 1080p.
NOTE
• Consult the documentation supplied with your TV to select the
correct TV resolution.
• If your TV is not HD Ready but has a HDMI socket, select the
576p video resolution.
Adjusts the screen size (aspect ratio) between 16:9
widescreen and various 4:3 picture sizes.
Item
16:9 Widescreen
Displays a 16:9 widescreen picture.
This ensures the best aspect ratio for
widescreen TVs.
4:3 Widescreen
(16:9)
In this mode, the picture is stretched
towards each side of the screen.
This displays a picture similar to 16:9
widescreen on 4:3 TVs.
4:3 Centre Cut Out
Displays a 4:3 picture in the centre of
the screen. With some programmes,
bars may appear on the left and right
hand side of the screen.
4:3 Letterbox (16:9)
Displays a 16:9 picture in the centre of
the screen. With some programmes,
bars may appear on the top and bottom
of the screen.
AV Settings
HDMI Audio
Adjusts the audio output type when the Recorder is
connected to surround sound system using a HDMI
cable. This allows you to enjoy realistic live sound.
Item
Stereo
The Recorder will output Stereo sound
when connected to a standard surround
sound system using the HDMI cable.
Dolby Digital
The Recorder will output Dolby Digital
surround sound when connected to
a compatible surround sound system
using the HDMI cable.
NOTE
• If you have connected the Recorder to a Widescreen TV, you
should select the 16:9 Widescreen setting.
• The wide mode feature lets you adjust the screen size using the
WIDE button on the remote control unit. Press WIDE to cycle
through the available screen sizes while watching TV.
• If you have selected 16:9 widescreen in the AV settings menu,
the wide mode will have no effect.
NOTE
• Only select Dolby Digital if you have a compatible surround
sound system. If you choose this setting with a non-compatible
sound system the audio will not be heard.
• Not all channels are broadcast with Dolby Digital sound.
19
TU-T2HR32_GB.indd 19
29/06/2010 15:16:26
Basic adjustment
Audio Description
AV Settings
Menu Transparency
This function allows you to adjust the transparency of the
OSDs.
Item
Off
The picture will not be visible behind
the OSD.
25%
The picture will be partially visible behind
the OSD.
50%
The picture will be mostly visible behind
the OSD.
75%
The picture is clearly visible behind the
OSD.
Some programmes are broadcast with audio descriptions
(AD) which provides a voice-over describing visual
information such as scenery, body language and facial
expressions.
Press AD on the remote control unit to toggle audio
description on or off.
NOTE
• If audio description is available for a programme, the AD symbol
will be displayed in the Information Screen (Page 10) and the
EPG (Page 12).
• When turning the AD function ON or OFF you may notice a brief
loss in audio. This is not a fault.
AV Settings
Audio Description Volume
NOTE
• The menu transparency settings will not affect the “MAIN
MENU”.
AV Settings
Adjusts the volume of the audio description when
available.
AV Settings
Channel Change Timeout
This function allows you to adjust the length of time that
information screen is displayed for if no other buttons are
pressed
Audio Delay Settings
Synchronises the audio and video outputs when the
Recorder is connected to a Dolby Digital Surround Sound
System using the SPDIF (digital audio output) connection.
Digital Audio Delay
60 ms
1
Press a/b to increase or decrease the audio
delay time.
2
Press EXIT to complete the setting.
20
TU-T2HR32_GB.indd 20
29/06/2010 15:16:28
Basic adjustment
Languages
Languages
Audio Language
Settings
AV Settings
Subtitle \Language
This function allows you to set the default audio language
to English, Welsh, Gaelic or Irish.
Audio Language
Languages
Audio Description Language
Selecting audio languages
Parental Control
Freeview +
General
OK
Select
Exit
Exit Menu
Languages
Press AUDIO on the remote control unit to
toggle switch between the available audio
languages.
NOTE
• Not all programmes are broadcast with alternative audio
languages. If the selected audio language is not broadcast,
English will be used.
Languages
Subtitle Language
This function allows you to set the default subtitle
language to English, Welsh, Gaelic or Irish.
NOTE
• Some subtitle languages are available with enhanced subtitles.
These provide additional information about the programme for
the hard of hearing.
Switching on subtitles
Audio Description Language
This function allows you to set the default audio
description (AD) language to English, Welsh, Gaelic or
Irish.
NOTE
• Not all programmes are broadcast with alternative audio
description languages. If the selected audio description
language is not broadcast, English will be used.
Press SUBT on the remote control unit to
toggle subtitles on or off.
NOTE
• Not all programmes are broadcast with subtitles. If subtitles are
available for a programme, the SUBT symbol will be displayed
in the Information Screen (Page 10) and the EPG (Page 12).
• If subtitles are available they will be displayed at the bottom of
the screen in the default subtitle language.
21
TU-T2HR32_GB.indd 21
29/06/2010 15:16:31
Basic adjustment
Parental Control
Parental Control
The Parental Control feature allows you to prevent
accidental changes being made to the Recorder. In
addition channels can be locked to prevent children
viewing scenes of a violent or sexual nature.
Allow parental changes
This function allows you to prevent changes within the
parental control menu without first entering the parental
settings PIN.
Parental Settings PIN
Item
Settings
AV Settings
Parental Settings PIN
Enabled
This will allow access to the parental
control menu without first entering the
parental settings PIN.
Disabled
This will prevent access to the parental
control menu unless the parental
settings PIN is entered.
This menu is PIN protected.
Languages
Parental Control
General
OK
Select
Exit
Please enter your PIN to view and change
the settings.
OK
Select
Exit
Exit
0
9
Parental Control
- - - -
Allow Hard Disc Drive format
Enter PIN
This function gives the option to allow the hard disc drive
to be formatted or not.
Exit Menu
The default personal identification number (PIN) must
be entered before the parental control settings can be
adjusted.
Enter the default four digit PIN (0000) using
the 0-9 numeric buttons, then press OK.
Item
Enabled
This will allow the Hard Disc Drive to be
formatted.
Disabled
This will prevent the Hard Disc Drive
from being formatted.
NOTE
Parental Control
• If you have changed the default PIN, this must be entered
before the parental control settings can be adjusted.
Change PIN
Parental Control
Guidance PIN for recordings
Settings
This function is broadcaster dependant and restricts
playback of Guidance flagged content.
AV Settings
Languages
Item
This will allow playback to be performed
with a PIN entry.
Parental Control
Yes
This will allow playback to be performed
without a PIN entry.
General
No
OK
Select
Exit
PIN Change
Enter old PIN
- - - -
Enter new PIN
- - - -
Copnfirm new PIN
- - - -
OK
Select
Exit
Exit
0
9
Enter PIN
Exit Menu
Parental Control
Allow first time installation
This function allows you to prevent a first time installation
being performed without first entering the parental
settings PIN.
This function allows you to change the PIN.
E Changing the parental settings PIN.
1
Enter the default (0000) or current four digit
PIN using the 0-9 numeric buttons.
2
Enter the new four digit PIN using the 0-9
numeric buttons.
Confirm the new four digit PIN using the 0-9
numeric buttons.
Item
Enabled
This will allow a first time installation
to be performed without entering the
parental settings PIN.
3
This will prevent a first time installation
to be performed unless the parental
settings PIN is entered.
NOTE
Disabled
• As a precautionary measure, make a note of your PIN on the
back of this operational manual, cut it out and keep it in a safe
place that children cannot reach.
22
TU-T2HR32_GB.indd 22
29/06/2010 15:16:33
Basic adjustment
Freeview+
Freeview+
Auto Disk Management
Settings
AV Settings
Default Recording Mode
Add to Start of Recording
Languages
Add to End of Recording
Live Pause Length
Parental Control
Skip Forwards Time
Skip Backwards Time
Freeview +
Auto Disk Management
Show Available Space As
General
When Auto Disk Management is turned on, if the
recorder runs out of space whilst recording, old
recordings will automatically be deleted to create free
space. The internal hard drive can store up to 120 hours
of digital TC broadcast (depending on the data rate of the
recorded programme, which is set automatically set by
the broadcaster).
Format Hard Disk Drive
NOTE
OK
Select
Exit
• Occasionally, the Recorder may miss the start or the end of the
recording. This is not a fault of the unit, as the broadcaster may
have not updated the information.
Exit Menu
Freeview+
Freeview+
Default Recording Mode
This function allows you to select the mode for recording
programmes when recording from a SD channel and the
same programme is available in HD.
Show Available Space As
This function allows you to select how much space left
on the Hard Disk Drive is displayed on screen.
Item
Item
Percentage of Total
Space
This displays the space remaining as a
percentage.
Always Ask
Whenever recording is selected, a
message will appear on screen. You can
select to record either in High Definition
or Standard Definition quality.
Hours (High
Definition)
This displays the space left for recording
in High Definition.
High Definition
Recording is performed in
High Definition.
Hours (Standard
Definition)
This displays the space left for recording
in Standard Definition.
Standard Definition
Recording is performed in
Standard Definition.
Freeview+
Format Hard Disk Drive
Freeview+
Live Pause Length
This allows you to set a time limit that a Live TV
programme can be paused. This can be either 60 or 120
minutes duration.
This function allows you to format the hard disk drive.
NOTE
• Formatting the hard disk drive will erase all recorded
programmes.
Freeview+
Skip Forwards Time
This function allows you to set a time interval for skipping
forwards through a recorded programme. This can be
selected from either 10, 30, 40 or 60 seconds.
Freeview+
Skip Backwards Time
This function allows you to set a time interval for skipping
backwards through a recorded programme. This can be
selected from either 10, 30, 40 or 60 seconds.
23
TU-T2HR32_GB.indd 23
29/06/2010 15:16:36
Basic adjustment
General
General
Auto Retune
This function allows you to control when new services
(channels) are added and stored on the Recorder.
Settings
AV Settings
Auto Standby
Enabled
Item
Power Save in Standby Mode
Always Start
Whenever new services (channels) are
detected, the Recorder will automatically
tune and store them.
Always Ask
Whenever new services (channels) are
detected, a message will appear on
screen. You can choose to tune and
store the new services or cancel the
auto retune.
Upgrade Software
Languages
Auto Retune
Auto Retune Messages
Network Configuration
Parental Control
Manual Tune
First Time Installation
General
OK
Select
Exit
Exit Menu
General
General
Auto Retune Messages
Auto Standby
This function allows you to automatically switch the
Recorder into standby mode when there is no user
activity for 3 hours.
Item
Enabled
The Recorder will automatically switch
into standby mode when there is no
user activity for 3 hours.
Disabled
The Recorder will remain on constantly
unless switched into standby mode by
the user.
This function controls when retune messages are
displayed.
Item
All
All messages are displayed.
No Minor
Messages
Only major messages are displayed.
Information Only
Only information messages are
displayed.
None
No messages are displayed.
NOTE
• During the digital switchover, Auto retune messages may be
displayed. Follow the on-screen instructions to retune.
General
Power Save in Standby Mode
This function allows you to control the power saving
features of your Recorder.
Item
Enabled
The Recorder uses a very low amount of
power when in standby.
Disabled
Power saving features are disabled.
General
Network Configuration
This function allows you to configure the network.
General
Upgrade Software
This function allows you to control when software
upgrades are installed.
Item
Automatic
The Recorder will automatically install
software upgrades when available.
Manual
The Recorder will display a message
allowing you to confirm or cancel the
software upgrade.
24
TU-T2HR32_GB.indd 24
29/06/2010 15:16:40
Basic adjustment
Manually tuning channels
General
Manual tune
You can manually tune new services after the first time
installation has been completed.
Manual Tune
UHF Channel
42
Frequency (kHz)
641787
Bandwidth
8MHz
DVBT
System
Mode
2K
Guard
FEC
3/4
Mod
NID
====
TSID
1/32
QAM16
====
Systems Found / Added
== / ==
Tuner Lock
Lock
19%
Signal Strength
40%
Signal Quality
OK
Watch
Exit
Exit Menu
Start Scan
You can manually tune new services after the first time
installation has been completed.
1
2
3
4
5
6
7
8
Press c/d to select the desired UHF channel.
Press b to select ‘Frequency (kHz).
Press c/d to adjust the frequency.
Press b to select ‘Bandwidth’.
Press c/d to adjust the ‘bandwidth’
Press b to select ‘System.
Press c/d to select a ‘System’.
Press the BLUE coloured button to start
scanning for the specified channel. If the
channel is found it will be stored in the
Recorder and will be available in the channel
list and EPG.
Item
UHF Channel
The channel number you want to save
the manually tuned channel as.
Frequency
The frequency of the service (channel)
you are manually tuning.
Bandwidth
The bandwidth of the service (channel)
you are manually tuning.
System
The type of tuning system
NOTE
• You can enter the UHF Channel and Frequency using the 0-9
numeric buttons.
General
First time installation
This function allows you to perform a first time installation
(page 9).
25
TU-T2HR32_GB.indd 25
29/06/2010 15:16:43
Basic adjustment
7 Select
Library
E Display/close the LIBRARY screen
Press the LIBRARY button on the remote
control or select Library from the Main Menu.
9
BBC ONE
MOTD Live: Spain v Switzerland
Gary Lineker introduces live coverage from Durban. Spain are favourites
to win a first-ever World Cup. Switzerland are appearing in their ninth
finals. Also in HD. [S]
AD
001 BBC ONE
Breakfast
Deal or No Deal
The Simpsons
EastEnders
Escape to the Country
Royal Ascot
MOTD Live: Spain v Switzerland
Stop
GUIDE
Guide
SUB
Channel 4
BBC ONE
BBC ONE
15/06
15/06
15/06
15/06
16/06
68% Remaining
Recorded
Viewed
Recorded
Failed
Recorded
BBC ONE
BBC ONE
16/06
16/05
Recorded
Recorded
BBC ONE
Channel 4
Protect
Schedule
Preview
Delete
OK
Select
8 Exit Menu
Press the EXIT button on the remote control
to exit the current screen.
9 Hours Remaining
Library
Wed 16 Jun 2010
2:38pm - 2:39pm
Press the OK button on the remote control to
make a selection.
This displays the available space on the Hard
Disk Drive for recording.
Scheduled Recordings
E Display/close the Scheduled
Recordings screen
EXIT
Exit Menu
Select Scheduled Recordings from the Main
Menu.
Scheduled Recordings
1 2 3 4 5 6 7 8
1 Stop
This stops playback of a previewed recording,
selected with the H button on the remote
control.
2 Guide
Wed 16 Jun 2010
5:15pm - 6:00pm
BBC ONE
The Weakest Link
Nine contestants paly as a team to win up to 10,000 pounds. However, only one takes the prize money
home; round by round the contestants vote off the weakest link. [S]
SUB
S
001 BBC ONE
The Weakest Link
The Simpsons
BBC ONE
Channel 4
16/06
16/06
68% Remaining
Scheduled
Scheduled
S
S
S
S
Channel 4 News
Channel 4
16/06
Scheduled
S
S
S
S
S
S
S
S
S
S
1 2 3
Coronation Street
ITV1
16/06
Scheduled
South Africa Walks
BBC TWO
17/06
Scheduled
South Africa Walks
BBC TWO
BBC ONE
17/06
17/06
Scheduled
Scheduled
Breakfast
GUIDE
Guide
Series
Delete
4 5
EXIT
Exit Menu
Press the GUIDE button on the remote control
to view the programme guide.
3 Protect
This function allows you to protect a selected
recording, selected with the RED button on
the remote control. A P will appear on the right
hand side in the selected programme row.
4 Schedule
This function takes you to the Scheduled
Recordings menu.
5 Preview
This function allows you to preview a selected
recording, selected with the YELLOW button
on the remote control.
6 Delete
This function allows you to delete a selected
recording, selected with the BLUE button.
1 Guide
Press the GUIDE button on the remote control
to view the programme guide.
2 Series
This function lets you select a repeated
scheduled recording for recording as a series
of programmes. This is selected with the
GREEN button on the remote control.
3 Delete
This function allows you to delete the selected
scheduled recording. This is selected with the
BLUE button on the remote control.
4 Exit Menu
Press the EXIT button on the remote control
to exit the current screen.
5 Information Row
This row gives the details of the scheduled
recording, including the programme title, the
channel number, the date of the programme
and its current status.
26
TU-T2HR32_GB.indd 26
29/06/2010 15:16:44
Appendix
Troubleshooting
The following conditions in the table below do not always indicate a problem. Please perform the checks described
below before calling for service. If the problem can not be corrected by the use of this manual, remove the mains plug
from the power socket and contact the Helpline on 0845 880 0421 in order to obtain service or advice.
Where this is not possible please visit our web site www.sharp.co.uk/customersupport.aspx
Customers without Internet access may phone 0845 880 0421 during office hours.
In the unlikely event of this equipment requiring repair during the guarantee period, you will need to provide proof of
purchase to the repair company. Please keep your purchase invoice or receipt in a safe place.
WARNING
Under no circumstances should you try and repair this product yourself. This will invalidate the warranty. Do not open the
unit as there is risk of electric shock.
Problem
Possible solution
•
No power.
•
•
•
Check if you pressed a on the remote control unit.
Is the AC power adapter disconnected?
Check if you pressed a on the Recorder.
•
The Recorder cannot be operated.
•
External influences such as lightning, static electricity, etc., may cause improper operation. In this
case, operate the Recorder after first turning off the power, or unplugging the AC power adapter and
re-plugging it in after one or two minutes.
•
Remote control unit does not operate.
•
•
•
•
Are batteries inserted with polarity (e, f) aligned?
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminating the remote control sensor?
•
Picture is cut off.
•
Are screen mode adjustments (WIDE MODE) such as picture size made correctly? (Page 19)
•
Power is suddenly turned off.
•
•
The Recorder’s internal temperature has increased. Remove any objects blocking the vent or clean.
Is auto standby activated? (Page 24)
•
No picture.
•
•
•
•
•
Are connections to external equipment correct? (Pages 15 to 17)
Is the input signal type selected correctly after connection? (Page 19)
Is the correct output source selected? (Page 10)
Is the antenna connected properly? (Page 9)
Hold the HDMI button on the remote control for 5 seconds to reset the output to 1080i. (Page 19)
•
No sound.
•
•
Is the volume too low?
Check if you pressed mute on the remote control unit.
•
The Recorder sometimes makes a
cracking sound.
•
This is not a malfunction. This happens when the casing slightly expands and contracts according to
changes in temperature. This does not affect the Recorder’s performance.
•
Freezing / Blocking
•
•
Check Freeview reception information as we have listed on the front of the manual.
Refer to page 9 to perform the First Time Installation.
•
There is noise interference on the TV
while a broadcast is being received.
•
Depending on the reception of the broadcast, interference may appear on the picture while you
watch a TV broadcast and the unit is left on. This is not a malfunction of the unit.
•
Unit is making a humming / whirring
noise
•
The unit has a fan and hard drive installed. This noise is not a malfunction of the unit.
Cautions regarding use in high and low temperature environments
• When the Recorder is used in a low temperature space (e.g., room, office), the picture may leave trails or appear slightly delayed. This
is not a malfunction, and the Recorder will recover when the temperature returns to normal.
• Do not leave the Recorder in a hot or cold location. Also, do not leave the Recorder in a location exposed to direct sunlight or near a
heater.
Unrecordable Material
In the unlikely event that there is some problem like loss of recorded video or audio content due to HDD malfunction,
please be aware beforehand that Sharp will bear no responsibility to compensate for the content that could not be
recorded or edited, for the loss of recorded or edited video, or for other related direct or indirect damages.
If a power failure occurs
• The content being recorded or timer recorded may be damaged if power failure occurs.
• The content being played back may be damaged.
For important recording
• If the HDD malfunctions, the content recorded on the HDD may be lost. If you wish to save the content permanently, we recommend
copying or moving the content to Video or DVD.
27
TU-T2HR32_GB.indd 27
29/06/2010 15:16:45
Appendix
Specifications
Item
TU-T2HR32 Digital Terrestrial HD Recorder for Freeview HD
All combinations of the below parameters can be received and automatically
detected. (Except bandwidth).
Receiving Signal Type (DVB-T)
Tuner /
Demodulator
Video
Audio
QPSK, 16QAM, 64QAM
FFT Mode
2K, 8K
Code Rate
1/2, 2/3, 3/4, 5/6, 7/8
Guard Internal
1/4, 1/8, 1/16, 1/32
Channel Bandwidth
7, 8 MHz
Modulation Type
QPSK, 16QAM, 64QAM, 256QAM
FFT Mode
1K, 2K, 4K, 8K, 16K, 32K
Code Rate
1/2, 3/5, 2/3, 3/4, 4/5, 5/6
Guard Internal
1/4, 5/32, 1/8, 5/64, 1/16, 1/32, 1/64,
1/128
CPU / Clock
STi7105/ST40 core, 450MHz
Transport
DVB Demultiplexer
Hard Disk Drive
320Gb
Flash Memory
16MB
System Memory
128MByte X 2 DDR
Software
Pixsan Elgist and MHEG middleware
CPU Core
ST231 / 450MHz
Video Standards
MPEG-1 ISO/IEC 11172-2
MPEG-2 MP@ML and MP@HL, ISO/IEC 13818-2
MPEG-4 AVC MP@L4 and HP@L4.1
Field / Frame Rate
60/30 Hz for NTSC or 50/25 Hz for PAL
HD/SD Decoding Capability
Interlaced Mode/ Progressive Mode: 1080i, 720p, 576p, and 576i
Aspect Ratio
16:9 Widescreen
4:3 Widescreen (16:9)
4.3 Centre Cut Out
4.3 Letter Box (16:9)
Video Input / Output
Digital Video HDMI with HDCP supported
CVBS, R/G/B for TV SCART OUT
CVBS for VCR SCART OUT
CVBS, R/G/B for VCR SCART IN
Output Modes
Teletext /
Subtitle
7, 8 MHz
Modulation Type
All combinations of the below parameters can be received and automatically
detected. (Except bandwidth).
Receiving Signal Type (DVB-T2)
System
Channel Bandwidth
HD
1080P / 1080i / 720p / 576p
Output format changed by specific
hot-key (software switchable)
SD
576i
Decoding and display for supporting Closed Captions & Teletext
CPU Core
ST231/ 450MHz
Audio Standards
MPEG-1 layer I & layer II, MP3
MPEG-2 layer II , Dolby Digital
MPEG-2 AAC/AAC+
Audio Input / Output
AL/AR for TV SCART OUT (Volume adjustable)
AL/AR for VCR SCART OUT (Fixed volume)
AL/AR for VCR SCART IN
Optical Digital Audio SPDIF
Digital Audio SPDIF Output Format
IEC-60958 for PCM data
IEC-61937 for Encoded Bitstream Data
Sampling Rate
32, 44.1, 48, and 96 KHz
28
TU-T2HR32_GB.indd 28
29/06/2010 15:16:46
Appendix
Item
Software
Upgrade
TU-T2HR32 Digital Terrestrial HD Recorder for Freeview HD
Over Air Download
Yes, via DVB-SSU
USB Port
Yes
Display
Front Panel
Rear Panel
Power
Interface
Power
Consumption
Others
Keypad
Power
IR Sensor
Yes
RF Input Connector
F type, Female (for NTSC)/IEC type, Female (for PAL), 75 Ohm
Loop Through Output Connector
F type/IEC type, Male/Female, 75 Ohm
Stereo (left & right) Audio output
CVBS, R/G/B video output
Dual SCART for TV/VCR
For TV SCART: w/ OSD and Volume adjustable
For VCR SCART: w/o OSD and fixed Volume
Digital Video & Audio Output
HDMI Connector
Optical Digital Audio SPDIF
TosLink Interface
RJ 45
Ethernet connection with unique Mac address
RS 232
Service only
Input Voltage
200~240 VAC, 50/60 z
Normal Operation
17W@220V/60Hz
Low Power Standby
0.8W
Accessory
Customer Selectable Remote Controller (and Batteries)
User’s Manual
RF Cable (1.1M)
EMC/ Safety
Compliant to CE
ATC
HDMI 1.4, HDCP
Dolby
Dolby Digital Stereo, Dolby Digital+ (HE AAC)
Software
Dbook 6.1 compliant
Tested to DTG Test Suite
Audio Description, Recorder mix
MHEG5 HD Dbook 6.1
MHEG5 interaction channel
MHEG5 iPlayer ready
PIN CODE reminder
NOTE
• You need to insert the PIN code here and refer it to the pages in the manual where this is covered.
NOTE
• Removal of a PIN code could be subject to a service charge and if you would like to use this feature the PIN code should be written
down.
Trademarks
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”
• Manufactured under license from Dolby Laboratories.
• “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
29
TU-T2HR32_GB.indd 29
29/06/2010 15:16:46
Appendix
End of life disposal
A. Information on Disposal for Users (private households)
1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!
Used electrical and electronic equipment must be treated separately and in accordance with legislation that
requires proper treatment, recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households within the EU states may return their
used electrical and electronic equipment to designated collection facilities free of charge*. In some countries*
your local retailer may also take back your old product free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
Attention: Your
product is marked
with this symbol.
It means that used
electrical and
electronic products
should not be
mixed with general
household waste.
There is a separate
collection system for
these products.
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these
separately beforehand according to local requirements.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment,
recovery and recycling and thus prevent potential negative effects on the environment and human health
which could otherwise arise due to inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the correct method of
disposal.
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if
you don’t purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch
or www.sens.ch.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be
charged for the costs arising from take-back and recycling. Small products (and small amounts) might be
taken back by your local collection facilities.
For Spain: Please contact the established collection system or your local authority for take-back of your used
products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the correct method of
disposal.
The battery supplied with this product contains traces of Lead.
For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household
waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in
accordance with legislation. Please contact your local authority for details on the collection and recycling
schemes.
For Switzerland: The used battery is to be returned to the selling point.
For other non-EU countries: Please contact your local authority for correct method of disposal of the used
battery.
30
TU-T2HR32_GB.indd 30
29/06/2010 15:16:46
Important Notice
Digital Switchover and Your TV Equipment
WHAT YOU NEED TO DO TO ENJOY WATCHING TV DURING AND FOLLOWING DIGITAL
SWITCHOVER
Starting in 2008 and ending in 2012, television services in the UK will go completely digital, TV region by TV region.
To continue using this digital TV equipment during and following digital switchover, you will need to “reset” your digital TV
channels.
Users of this product must reset their channels on at least 2 different occasions, normally 1 month apart when
switchover happens. Digital UK, the body leading digital TV switchover, and broadcasters will advise you when to reset
your channels on each occasion.
If you do not reset your channels, you risk losing some or all of your TV services during and following switchover.
Please refer to Page 24 of this manual for help with resetting channels.
Please note that in order to receive the maximum number of available TV services on your equipment you must perform
a first time installation and do not just add channels.
If you have questions relating to digital switchover please don’t hesitate to call us on 0845 6 50 50 50
or visit www.digitaluk.co.uk.
The FREEVIEW service is subject to coverage. An aerial upgrade may be required. The FREEVIEW
PLAYBACK word and logo are trade marks of DTV Services Ltd and are used under licence.
© DTV Services Ltd 2006.
31
TU-T2HR32_GB.indd 31
29/06/2010 15:16:47
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its
option the replacement, of this product subject to the conditions listed below:
1. This guarantee shall only apply to faults which are due to inferior workmanship
or materials. It does not cover faults or damage caused by accident, misuse, fair
wear and tear, signal related issues, neglect, tampering with the product, or repair
other than by a Service Facility appointed by Sharp.
2. As this product is intended for private domestic use only, the guarantee will not
apply if the product is used in the course of a business, trade or profession.
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp,
or its appointed Service Facility within one year from the date this product was
purchased. Proof of purchase must be provided.
4. In the unlikely event of this product requiring repair, please contact the Sharp
DTR help line on 0845 880 0421.
5. No person has any authority to vary the terms or conditions of this guarantee.
6. This guarantee is offered as an additional benefit to your statutory rights, and
does not affect these rights in any way.
If you have any difficulty operating this product, or would like information on other
Sharp products, please telephone the Sharp DTR Help Line on the number given
below.
Sharp DTR Help Line - 0845 880 0421
SHARP ELECTRONICS (U.K.) LTD.
4 Furzeground Way, Stockley Park, Uxbridge,
Middlesex, UB11 1EZ
32
TU-T2HR32_GB.indd 32
29/06/2010 15:16:47
Notes
33
TU-T2HR32_GB.indd 33
29/06/2010 15:16:49
TU-T2HR32 EN-05/10-dcs-8670
TU-T2HR32_GB.indd 34
29/06/2010 15:16:49