Explorer
Digital Video Recorder
®
User’s Guide
Get More Out of Your TV…
Watch
• Your favorite shows anytime you want...on your schedule
• Pause live TV for up to 1 hour without missing a minute
Record
• Two live programs at the same time
• All future episodes of your favorite programs by performing a simple,
one-time setup
Watch & Record • Watch one program while recording another
• Watch two programs at once (using the PIP feature) and record
one of them
• Watch a pre-recorded program while recording one or two
other programs
• Use the Multi-Room™ DVR* system to play back recordings on up
Play Back
to 4 TVs at the same time
Recordings on
Other TVs
• Each room can either play back the same recording or different
recordings, and each room has individual control of the play back
*The Multi-Room DVR feature is only available on the Explorer® 8300™ Multi-Room
DVR models.
ALLTOUCH REMOTE CONTROL
The AllTouch® Remote Control includes specific keys that enable you to control your
Explorer® Digital Video Recorder (DVR).
IMPORTANT! You must place the remote control in cable mode (press
the DVR features.
) to access
For descriptions of other remote control key functions, refer to the user’s guide for
your remote control model.
The following illustration shows the AT8550™ All Touch Remote Control. Your remote
control model may vary.
Power on/off
Select cable mode
Display Program Guide
Move through Program
Guide by days
Move through
on-screen choices
Display General/Quick
Settings
Display program information
Move through settings and
program guide
Remove banners/graphics
from TV screen
Perform selected action
Make on-screen choices
Display list of recordings
Instant Replay
Rewind
Display last channel viewed
Return to live TV
Fast-forward
Stop
Record program
Pause
Resume playing
paused program
Dedicated DVR Keys
Swap PIP screen
with Main screen
Turn PIP on/off
Size HDTV picture
Select PIP channels
Move PIP screen
Dedicated PIP Keys
T11808
NOTICE
FOR
CATV INSTALLERS
The servicing instructions in this notice are for use by qualified service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that contained in
the operating instructions, unless you are qualified to do so.
Note to System Installer
(U.S.A. and Canada Only)
This reminder is provided to call the system installer's attention
to Article 820-93 and Article 820-100 of the NEC (Canadian
Electrical Code Part 1), that provide guidelines for proper
grounding and, in particular, specify that the metallic sheath of
communications cables shall be connected to the grounding
system of the building, as close to the point of cable entry as
practical.
CAUTION: To reduce the risk of electric shock, do not
remove cover (or back). No user-serviceable parts
inside. Refer servicing to qualified service personnel.
WARNING
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
This symbol is intended to alert you that uninsulated voltage
within this product may have sufficient magnitude to cause
electric shock.Therefore, it is dangerous to make any kind of
contact with any inside part of this product.
Ce symbole a pour but d’alerter toute personne qu’un contact
avec une pièce interne de ce produit, sous tension et non isolée,
pourrait être suffisant pour provoquer un choc électrique. Il est
donc dangereux d’être en contact avec toute pièce interne de
ce produit.
This symbol is intended to alert you of the presence
of important operating andmaintenance (servicing)
instructions in the literature accompanying this product.
Ce symbole a pour but de vous avertir qu’une
documentation importante sur le fonctionnement et
l’entretien accompagne ce produit.
20060907SISD
SAFETY FIRST
Before using the DVR, read the IMPORTANT SAFETY INSTRUCTIONS section of your DVR connectivity guide.
U.S. PATENTS LIST
A patent notice is affixed to this product. In addition, the product may also be covered by one or more of the following
patents:
4,498,169; 4,636,852; 4,641,181; 4,651,208; 4,691,353; 4,692,919; 4,698,598; 4,719,642; 4,748,667; 4,829,569; 4,866,770;
4,885,775; 4,888,799; 4,890,319; 4,922,456; 4,922,532; 4,924,498; 4,965,534; 4,991,011; 5,003,384; 5,012,510; 5,029,207;
5,045,816; 5,053,883; 5,054,071; 5,058,160; 5,142,575; 5,142,690; 5,146,526; 5,155,590; 5,214,390; 5,225,902; 5,225,925;
5,235,619; 5,237,610; 5,239,540; 5,241,610; 5,247,364; 5,255,086; 5,257,403; 5,267,071; 5,270,809; 5,271,041; 5,272,752;
5,282,028; 5,285,497; 5,287,351; 5,301,028; 5,309,514; 5,317,391; 5,319,709; 5,341,425; 5,347,388; 5,347,389; 5,357,276;
5,359,601; 5,361,156; 5,367,571; 5,379,141; 5,379,145; 5,381,481; 5,390,337; 5,400,401; 5,406,558; 5,418,782; 5,420,866;
5,420,923; 5,425,101; 5,428,404; 5,430,568; 5,434,610; 5,436,749; 5,438,370; 5,440,632; 5,442,472; 5,455,570; 5,457,701;
5,471,492; 5,477,199; 5,477,262; 5,477,370; 5,481,389; 5,481,542; 5,485,221; 5,493,339; 5,497,187; 5,500,758; 5,502,499;
5,506,904; 5,519,780; 5,539,822; 5,550,825; 5,579,055; 5,579,057; 5,583,562; 5,592,551; 5,596,606; 5,600,378; 5,602,933;
5,640,388; 5,657,414; 5,675,575; 5,684,876; 5,715,515; 5,724,525; 5,740,300; 5,742,677; 5,754,940; 5,757,416; 5,771,064;
5,774,859; 5,825,829; 5,826,167; 5,850,305; 5,854,703; 5,870,474; 5,892,607; 5,920,626; 5,923,755; 5,930,024; 5,930,515;
5,937,067; 5,963,352; 5,966,163; 5,982,424; 5,991,139; 5,999,207; 6,005,631; 6,005,938; 6,016,163; 6,028,941; 6,029,046;
6,052,384; 6,055,244; 6,072,532; 6,105,134; 6,148,039; 6,157,719; 6,188,729; 6,195,389; 6,212,278; 6,215,530; 6,219,358;
6,240,103; 6,243,145; 6,246,767; 6,252,964; 6,272,226; 6,292,081; 6,292,568; 6,320,131; 6,374,275; 6,405,239; 6,411,602;
6,417,949; 6,424,714; 6,424,717; 6,433,906; 6,438,139; 6,463,586; 6,467,091; 6,476,878; 6,493,876; 6,510,519; 6,516,002;
6,516,412; 6,526,508; 6,538,595; 6,546,013; 6,560,340; 6,567,118; 6,570,888; 6,622,308; 6,629,227; 6,664,984; 6,667,994;
6,671,879; 6,674,967; 6,678,891; 6,714,598; 6,721,352; 6,721,956; 6,725,459; 6,738,982; 6,744,892; 6,744,967; 6,751,271;
6,760,918; 6,795,972; 6,802,077; 6,804,708; 6,811,447; 6,817,028; 6,822,972; 6,823,385; 6,832,386; 6,845,106; 6,868,473;
6,874,075; 6,889,191; 6,909,471; 6,917,622; 6,917,628; 6,922,412; 6,927,806; 6,928,656; 6,931,058; 6,937,729; 6,969,279;
6,971,008; 6,971,121; 6,978,310; D348065; D354959; D359737; D363932; D390217; D434753; D507240; D507535; RE36368;
RE36988
20051216PL
iii
CONTENTS
AllTouch Remote Control ............................................................... inside of front cover
Notice for CATV Installers .......................................................................... iii
Safety First ................................................................................................ iii
U.S. Patents List ....................................................................................... iii
GET STARTED
NEED TO INSTALL YOUR DVR?
Get Started ................................................................................................ 1
Connect the Explorer DVR to Your TV ........................................................ 1
Important Note Regarding the HDMI Interface on the 8300HD/8300HDC ...... 2
Connect External Devices to the DVR ........................................................ 2
Prepare the Explorer HD DVR to Work With Your TV ................................. 3
Start the Setup Wizard ....................................................................................... 3
Adjust Your HDTV Picture .......................................................................... 5
Adjust Your Picture Format Using Quick Settings ............................................ 6
Adjust Your HD Picture Using General Settings .............................................. 6
KEEP OUT — SET PARENTAL CONTROL AND BLOCKING
Set Parental Control ................................................................................... 7
Program Rating Categories ........................................................................ 8
Block Recordings with Parental Control ...................................................... 9
Watch Blocked Recordings ........................................................................ 9
Set Favorite Channels ................................................................................ 9
CONTROL TV
TRYING TO FIND A PROGRAM? USE THE PROGRAM GUIDE
Search for Programs Using the Program Guide .......................................... 10
Display the Program Guide .............................................................................. 10
Search for a Program by Channel, Title, or Theme .......................................... 10
Search for a Program by Date .......................................................................... 11
Select a Program from the Program Guide ................................................. 12
CONTROLLING LIVE TV AND RECORDINGS
Control Live TV and Recordings .................................................................. 13
Status Bar .......................................................................................................... 13
Pause a Live Program or a Recording ............................................................. 13
Rewind or Fast-Forward a Live or Recorded Program .................................... 13
Use Instant Replay ........................................................................................... 14
Use Slow Motion ............................................................................................... 14
Watch Action Frame by Frame .......................................................................... 14
Catch Up with a Live TV Program ..................................................................... 14
iv
WELCOME!
CONTENTS, CONTINUED
USING THE PIP FEATURE
Use Picture-In-Picture ................................................................................ 15
Turn PIP On and Off .......................................................................................... 15
Change the Channel of the PIP Screen ........................................................... 15
Move the Location of the PIP Screen ................................................................ 15
Swap the Main Screen and the PIP Screen ...................................................... 15
RECORD
Record Programs ....................................................................................... 16
Record a Program You Are Watching ............................................................... 16
Record a Program from the Program Guide .................................................... 16
Record Multiple Episodes of a Program .......................................................... 16
Record Two Live Programs at Once ................................................................. 17
Confirm Your Recordings ................................................................................. 17
Record a Pay-Per-View Event ........................................................................... 17
Schedule Future Pay-Per-View Recordings ..................................................... 17
WATCH RECORDINGS
Watch Recordings ..................................................................................... 18
Display a List of Your Recorded Programs ...................................................... 18
Watch Your Recorded Programs ...................................................................... 18
Display a List of Programs Scheduled to Record in the Future ...................... 18
MANAGE
Cancel Recordings ..................................................................................... 19
Cancel a Scheduled Recording ....................................................................... 19
Cancel a Recording That Is in Progress .......................................................... 19
Schedule Manual Recordings ..................................................................... 19
Check Recording Space ............................................................................. 20
Maximize Your DVR’s Storage Space ......................................................... 20
NO TIME TO WATCH A PROGRAM? SAVE IT
Save Recordings ........................................................................................ 21
Change the Default Save Time Setting for All Future Recordings ................... 21
Change the Save Time of a Single Recording ................................................. 21
v
CONTENTS, CONTINUED
FINISHED WITH A RECORDING? ERASE IT
Erase Recordings ....................................................................................... 22
Automatically Erase Oldest Recordings .......................................................... 22
Erase a Single Recording ................................................................................ 22
Copy Recordings from Your DVR to a VCR Tape ........................................ 23
Add Storage with a SATA Hard Disk Drive (Optional) ................................... 24
Connecting the SATA Device to the DVR ........................................................... 24
Troubleshooting the SATA Drive ........................................................................ 25
Maximize the Life of the DVR ..................................................................... 26
Turn Off Your DVR when Not In Use ................................................................. 26
Provide Adequate Ventilation ............................................................................ 26
USING YOUR DVR WITH A MULTI-ROOM DVR SYSTEM?
The DVR and Your Multi-Room DVR System ............................................. 27
Using Parental Controls on the Client Set-Tops .............................................. 27
GET MORE INFORMATION
Frequently Asked Questions ...................................................................... 29
Questions About the DVR ................................................................................. 29
Questions About Controlling a Live Program or Recording ............................. 29
Questions About PIP ......................................................................................... 30
Questions About Recording and Playing Back Programs ............................... 30
Questions About the Multi-Room DVR Client Set-Top ..................................... 32
Questions About HDTV Programs .................................................................... 33
Get More Information or Assistance ........................................................... 34
Online Documentation or the Explorer eClub .................................................. 34
Customer Support ............................................................................................ 34
Index .......................................................................................................... 36
Quick Tips ................................................................................... inside of back cover
Explorer Screens ........................................................................ inside of back cover
vi
GET STARTED
1
Determine TV Connections.
Determine the types of connections you need to make, based on your TV type (highdefinition [HDTV] or standard-definition [SDTV] TV) and home theater connection
requirements. Refer to the manual that came with your TV for more information.
2
Connect the DVR.
If your service provider has not already installed and connected the DVR for you,
connect the DVR to your TV based on the connection information described in
“Connect the Explorer DVR to Your TV,” next in this guide.
3
Configure the Picture Display.
Configure the picture display for your TV using the Setup Wizard. See “Prepare the
Explorer HD DVR to Work With Your TV” on page 3.
CONNECT THE EXPLORER DVR TO YOUR TV
The DVR family supports a number of connection options to support connections to
many types of TVs. The following table describes the available DVR outputs, and
includes when the output should be used. For more information about connectivity
requirements and connection diagrams, refer to the connection guide for your DVR
model, the user’s guide for your TV, the Explorer eClub (see “Online Documentation
or the Explorer eClub” on page 34), or contact your service provider.
OUTPUT TYPE
OR
DVI
Attention
Your HDTV does not support HDCP.
Please disconnect the HDMI Connector and use the
Y Pr Pb Connection to continue watching TV.
OUT 1
OUT 2
Pr
L
Pb
YES
A
U
D
I
O
IR
NO
OPTICAL
DESCRIPTION
Some HDTVs have a High-Definition Multimedia Interface (HDMI™) or Digital Visual Interface (DVI)
connector. The HDMI connector provides both a digital video and audio connection. The DVI
connector provides a digital video connection, but not a digital audio connection.
Notes:
• To connect the DVR with a DVI connector to a TV with an HDMI connector requires an
adapter and a separate audio connection.
• When using the HDMI connection with TVs, you need to complete additional configuration
steps. For more information, see “Important Note Regarding the HDMI Interface on the
8300HD/8300HDC” on the next page.
• If you connect to an HDTV using the DVI or HDMI ports, the DVR is automatically placed in
“HD” mode.
IMPORTANT! Your service provider may have High-Bandwidth Digital Copy Protection (HDCP)
activated for your area. If HDCP is activated for your area, and you connect the HDMI (DVI)
output cable to an HDTV that does not support HDCP, a message appears, instructing you to
disconnect the HDMI connection and watch video output through the PrPbY component
connectors.
R
Y
HDTV
DIGITAL
AUDIO OUT
VIDEO
AUDIO OUT
S - VIDEO
OUT
Pr
You can use the PrPbY ports, or component outputs, with either an HDTV or a non-HDTV
with component inputs. If connecting to a TV using component outputs, you must use the
Setup Wizard to select the output formats that your particular TV supports. See “Prepare the
Explorer HD DVR to Work With Your TV” on page 3.
Pb
VIDEO
Y/V
You can use the Y Output (on an HD unit configured for SD operation) or TV Video Output
connector for connecting to an SDTV. If you do not see video using this connection, see
“Prepare the Explorer HD DVR to Work With Your TV” on page 3.
Pr
Pb
VIDEO
Y/V
OR
S-VIDEO
OUT
1394
You can use these connections to connect the DVR to an SDTV. If you use the Cable Out
connector, you must tune your TV to the correct channel (typically either channel 3 or
CABLE
OUT channel 4). Contact your service provider for more information.
(OPTIONAL) Some HDTVs have 1394 connectors. If you connect the DVR to your HDTV
using 1394, you also need to connect separate video and audio connections to your HDTV.
1
CONNECT THE EXPLORER DVR TO YOUR TV, CONTINUED
IMPORTANT NOTE REGARDING THE HDMI INTERFACE ON THE
8300HD/8300HDC
The HDMI interface automatically configures the audio output for a format supported
by the TV attached to the DVR through the HDMI connection. This automatic
configuration is only performed the first time the DVR is connected through the
HDMI interface to a compatible TV. When the automated process is finished, the
DVR sets the audio output format to either Dolby® Digital or Other (Linear PCM). The
selected format is provided to all digital outputs. As a result, if the TV does not
support Dolby Digital decoding, you may need to override the automatic setting to
provide Dolby-formatted content to a Home Theater Receiver connected to the
digital output on the DVR. In addition, if the DVR is connected to a different TV, you
may need to manually set the output to a format that the new TV supports.
To override the automatic configuration or to change the audio output format used
on the HDMI interface, complete the following steps:
twice. The General Settings menu appears.
1.
Press
2.
Press
3.
Press to select Dolby Digital. This setting sends Dolby Digital audio to the HDMI,
DIGITAL AUDIO OUT, and OPTICAL AUDIO OUT connectors.
4.
Press
5.
Press
or
A
to select Audio: Digital Out.
to accept the option for the DVR.
to return to normal viewing.
Note: If you set the audio output to a format that the TV does support, you
will not get any audio through the TV. You will either need to listen with a
secondary device such as a Home Theater Receiver or manually switch the
configuration back to one supported by the TV to hear the audio for the
program using the TV speakers.
CONNECT EXTERNAL DEVICES TO THE DVR
Do you have an external device, such as a VCR, camcorder, or video game device
but no Audio/Video Input connectors on your TV for easy connectivity? Connect the
external device to your DVR instead!
•
Example of front panel Audio/
Video Inputs on an 8300 DVR
On 8300-series DVRs, the DVR front panel has Audio and Video Input
connectors that allow you to connect to the video and left/right (L/R) audio
outputs of an external device to deliver the audio and video to your TV.
•
On 8000-series DVRs, the Audio and Video Input connectors are located on the
rear panel of the DVR.
After you connect the external device to your DVR, press the Video Source key on
your remote to switch between the external device (Auxiliary) and your DVR. When
you switch to the Auxiliary device, an on-screen banner briefly displays “Video
Source: Auxiliary.” When you press the Video Source key to switch back to the
DVR device, the currently tuned channel is displayed.
Note: The on-screen content of the external device cannot be copied to
your DVR hard drive.
2
PREPARE
THE
EXPLORER HD DVR
TO
WORK WITH YOUR TV
The Setup Wizard is a program that helps you set up your DVR to provide the best
picture quality that your TV supports. Based on the type of TV you have, the Wizard
allows you to select all picture formats supported by your SDTV or HDTV.
Note: If you are connecting an SD DVR to an SDTV, no setup is required. Skip
this section and go to “Set Parental Control” on page 7.
IMPORTANT! Any time that you change connections on your DVR, you must run the
Setup Wizard again to make sure your TV is receiving its supported picture formats.
This rule does not apply if you are using 1394 connectors.
START
1.
2.
Press the Guide and Info
buttons at the same time
3.
4.
5.
6.
7.
HDTV Setup Wizard
You will be asked a short series of questions
that will help you set up your HDTV Settop Box
Press
to start
8.
THE
SETUP WIZARD
Press
on your remote to place the remote in cable mode.
Note: For more information about preparing the remote to work with your make
and model of TV, refer to the user’s guide for your remote model.
Make sure that the DVR is powered OFF, but still plugged into an active power
outlet, and properly connected to the TV. See “Connect the Explorer DVR to Your
TV” on page 1.
Turn the TV ON.
Configure the TV to display the input where the DVR is connected (see the user’s
guide for your TV for more information).
With the DVR powered OFF, press Guide and Info on the DVR front panel at the
same time. The TV Connection Set-up screen appears (within 20 seconds).
Notes:
• The TV Connection Set-up screen toggles between an HD and SD mode
selection screen until you make a selection. If you do not see video within 30
seconds, check your connections and TV settings.
• The DVR front panel displays either HD or SD while the TV Connection Set-up
screen toggles between HD and SD mode.
Choose one of the following options:
• To choose HD mode, press B on the remote to start the setup.
• To choose SD mode, press A on the remote to start the setup.
Note: If you are connected to your HDTV using the component ports and you
incorrectly select “SD” mode, your video may appear pink in color.
Choose one of the following options:
• If you selected SD mode in step 6, a Setup Complete screen appears. You’re
ready to begin using your DVR to watch and record programs. You may skip the
rest of this section and go to “Set Parental Control” on page 7.
• If you selected HD mode, the HDTV Setup Wizard screen appears.
Press A to continue the setup.
Choose one of the following options from the Setup Options screen:
• To choose the Easy Setup option, press A ; then, go to the Easy Setup
Instructions on page 4.
• To choose the Advanced Setup option, press B ; then, go to the Advanced
Setup Instructions on page 4.
Setup Options
Press
for Easy Setup: Used by most TV viewers
Press
for Advanced Setup: Used by advanced TV viewers
Complete setup
3
PREPARE THE EXPLORER HD DVR TO WORK WITH YOUR TV, CONTINUED
EASY SETUP INSTRUCTIONS
1.
2.
Standard or Widescreen
Press
if your TV has a standard screen (4:3)
Press
if your TV has a widescreen (16:9)
Restart setup
Press A or B to select the type of TV screen you have. The setup is complete.
to begin watching TV.
Press
Notes:
• If you pressed A for the standard screen (4:3) TV setting, the TV is set to
receive programming in 480i format on non-HD channels and 1080i format on
HD channels.
• If you pressed B for the widescreen (16:9) setting, the TV is set to only
receive programming in 1080i format (even on non-HD channels).
Complete setup
3.
You are ready to begin using your DVR to watch and record programs. Go to
“Set Parental Control” on page 7.
Note: If you need to change your HDTV picture display, go to “Adjust Your HDTV
Picture” on page 5.
Tip: After you complete the setup, press
to stretch or zoom the picture.
ADVANCED SETUP INSTRUCTIONS
Note: Refer to the user’s guide that came with your TV for information
about the display formats your TV supports.
Standard or Widescreen
Press
if your TV has a standard screen (4:3)
Press
if your TV has a widescreen (16:9)
1.
2.
Restart setup
Complete setup
3.
Press A or B to select the type of TV screen you have and display an
Instructions screen.
The Instructions screen tells you that various picture formats will be displayed
for your selection.
Before you begin selecting picture formats, read the following:
IMPORTANT! If you see a black screen or if the picture quality is not
optimal, do not press
Save Picture Formats
Press
to view shows in the 1080i format
Press to test the next format
1080i
720p
480i Standard
480p Standard
480i Widescreen
480p Widescreen
Return to previous format
Complete setup
. Press
again to view the next screen format.
4.
Follow the on-screen instructions to select your picture formats.
5.
Press
to toggle between the Save and Remove options, or press
how the next format looks on your TV screen.
6.
7.
After finding the best picture format, press
to begin watching TV.
Press
8.
You are ready to begin using your DVR to watch and record programs. Go to
“Set Parental Control” on page 7.
Note: If you need to change your HDTV picture display, go to “Adjust Your HDTV
Picture” on page 5.
Tip: After you complete the setup, press
4
B
B
to see
. The setup is complete.
to stretch or zoom the picture.
ADJUST YOUR HDTV PICTURE
PICTURE FORMATS AND YOUR HDTV DISPLAY
The following table shows the relationship between the picture format method, the
signal the DVR receives, and the format of the picture that displays on your TV screen.
If you chose this picture
format method:
And the DVR receives
this signal:
The HDTV displays the
picture in this format:
Fixed
1080i, 720p, 480i, 480p
Picture format selected in the
Quick Settings menu
Pass-Through or Auto-DVI
1080
720p
480i
480p
1080i
720p
480i
480p
Upconvert 1
480i/480p
720p/1080i
480p
1080i
Upconvert 2
480i/480p
720p/1080i
480p
720p
GENERAL SETTINGS: SET PICTURE FORMAT
Upconvert 1 and Upconvert 2 - When possible, the DVR
tries to improve the program display by taking an SD picture
and changing it to a simulated HD picture (upconverting).
Fixed - All programming is displayed using the picture format
you last selected. This setting remains fixed until you select a
new picture format from the Quick Settings menu.
Pass-Through or Auto DVI - The programming format is not
manipulated by the DVR. The DVR passes the signal through
to the TV. (See the box on the previous page for more
information about Pass-Through.)
If your HDTV uses a DVI or
HDMI port, Auto DVI/HDMI
appears here instead of
Pass-Through.
CHANGE THE DARKNESS OF BARS USED IN PICTURE DISPLAYS
WARNING:
Avoid Screen Burn-In! Do
not display the same fixed
images on your HDTV screen
for extended periods of time.
Images such as letterbox
bars or side bars, bright
closed-captioning
backgrounds, station logos,
or any other stationary
images may cause the
picture screen in your HDTV
to age unevenly; this is
known as screen burn-in.
Refer to the user’s guide that
came with your HDTV for
more information.
The DVR automatically adds bars to certain types of program formats to reduce the
chance for screen burn-in. If you decide to use these settings to watch programs,
you can change the darkness of the bars from Light (default setting) to Medium or
Dark.
1.
Press
twice to access General Settings.
2.
Press
3.
4.
Press
to display the Borders options (Light, Medium, or Dark).
Press
or
to select the shade you want to apply to the bars (Light,
Medium, or Dark).
5.
Press A to accept the setting. The DVR displays the Set: TV Borders option
with your selection shown.
6.
To exit from this screen and return to live TV, press
or
to select the option Set: TV Borders.
.
5
ADJUST YOUR HDTV PICTURE, CONTINUED
After using the Setup Wizard, if you want to change your picture preferences, you can
adjust the HDTV picture display using options within the Quick Settings and
General Settings menus.
If you do not need to change your picture quality, skip this section and go to “Set
Parental Control” on page 7.
Note: The picture format is tied to the content provider’s format and the
picture formats supported by your TV.
ADJUST YOUR PICTURE FORMAT USING QUICK SETTINGS
Because the picture quality of a program is affected by many factors, such as how the
program was originally recorded and the method used to broadcast the program, you
may find that displaying certain programs in a specific picture format provides the
picture quality you prefer.
Note: If your HDTV uses a composite, DVI, or HDMI port, it automatically selects the
best picture format for the program you are watching. DVI ports, however, can choose
only from the picture formats that your HDTV supports.
1.
Press
2.
Press
3.
Press
to select the picture format setting.
Press
again to display another picture format setting. Each time you press
4.
to access Quick Settings.
or
to select Picture Format.
,
another setting displays.
Note: If you used the Setup Wizard to select picture format settings and your
General Setting is not set to Pass-Through, the picture format settings that you
selected are available here. For example, if you used the Easy Setup method in
the Setup Wizard, only the settings 480i and 1080i are available for you to select.
Note: If you select PassThrough or Auto DVI/HDMI in
the General Settings: Set
Picture Format, you cannot
change the Picture Format in
the Quick Settings menu (the
Picture Format option will not be
shown). You can only stretch
and zoom the picture with the #
key on the remote or within
Quick Settings.
Quick Settings
Highlight an option, then press SELECT.
Turn OFF Parental Control
Picture Format
Picture Size
More Settings
720p
Normal
Return to TV
Pass-Through means that the
DVR does not change the
active signal it receives. It is
just passing the signal through
to the TV. Changing the picture
format in General Settings:
Set Picture Format to Fixed
lets you “fix” or adjust the
format in Quick Settings.
6
to view the picture with this setting.
5.
Press
6.
If necessary, repeat these steps to find a setting that you prefer.
ADJUST YOUR HD PICTURE USING GENERAL SETTINGS
You can adjust how your DVR displays pictures using the Picture Format and TV
Borders General Settings menu options.
SET YOUR DEFAULT PICTURE FORMAT
By automating picture adjustments, the DVR uses a method that you choose to
automatically select the picture format that provides the best display possible. The
methods that you can select from depend partly on the type of video connection your
HDTV uses.
1.
Press
2.
Press
3.
Press
4.
Press
twice to access General Settings.
or
to select Set: Picture Format.
to select the picture format setting.
or
to display each option.
Note: See the “General Settings: Set Picture Format” box on the next page for an
explanation of each option.
5.
Press
A
to accept the option for the DVR.
Note: The Explorer 8300™ DVR (8300) front panel displays the selected option and scan
rate. For example, if you selected Pass-Through, the 8300 front panel displays AUTO.
6.
Press
to return to normal viewing.
SET PARENTAL CONTROL
Notes:
•
This section covers the basics for setting up parental control and blocking
programs. You can also use parental controls to block recordings on your DVR.
For more information, see Block Recordings With Parental Control on page 9.
•
If you do not want to configure parental control and blocking, skip this section
and go to Search for Programs Using the Program Guide on page 10.
CREATING
OR
CHANGING
A
PIN
1.
Using the remote, press
twice to access General Settings.
2.
3.
Press
or
to select Block: PIN.
What is the current setting for Block: PIN?
• If Enabled and you do not know the PIN, contact your service provider to
determine the default PIN, and then go to step 4.
• If Disabled, press
, press A , and then go to step 7.
IMPORTANT! The PIN must be Enabled for the Parental Control feature to work.
4.
After receiving the default PIN, press
5.
6.
7.
8.
Press
or
to select Change and then press A .
When prompted, enter the 4-digit PIN given to you by your service provider.
When prompted, enter a new 4-digit PIN.
Enter your new 4-digit PIN again for confirmation.
9.
Press
.
to exit General Settings.
BLOCKING CHANNELS, RATINGS, AND PROGRAM TIMES
BLOCKING SYMBOLS
Indicates that a recording or
program is blocked
1.
Using the remote, press
2.
3.
When prompted, enter a PIN and then re-enter it to ensure accuracy.
or
and select one of the following options:
Press
• Block: Channels—to block all programs on a specific channel
• Block: Rating—to block all programs according to program ratings
• Block: Time New—to block all programs broadcast during a specific time
4.
5.
Press
and enter your 4-digit PIN when prompted.
Follow the on-screen instructions to block channels, ratings, or time slots.
Note: The DVR will record the blocked programs, but the DVR blocks the
playback of the recording unless you enter a valid PIN.
6.
Press
Indicates that a recording or
program is not blocked
twice to access General Settings.
to exit General Settings.
HIDING OR VIEWING BLOCKED PROGRAM TITLES
General Settings
Highlight a Preference, press SELECT to change its settings.
PREFERENCE
Block: Titles
SETTING
Hidden
Displayed
Hidden
Accept
Cancel Changes
You can prevent the DVR from displaying the titles of blocked programs on the
program guide and in the DVR Recorded and Scheduled lists.
1.
Using the remote, press
2.
Press Move Up
3.
Press Select
4.
Press
5.
Press
A
twice to access General Settings.
or Move Down
to select Block: Titles.
to set the Block: Titles setting to either Hidden or Displayed.
to accept your changes.
to exit General Settings.
UNBLOCKING THE CURRENT CHANNEL
1.
Using the remote, press
to access Quick Settings.
2.
Press Move Up
3.
4.
Press Select
to change the Parental Control setting.
When prompted, enter your 4-digit PIN.
or Move Down
to select Unblock this Channel.
7
SET PARENTAL CONTROL, CONTINUED
TURNING ON AND OFF PARENTAL CONTROL
1.
Using the remote, press
to access Quick Settings.
2.
or
to select Turn ON Parental Control or Turn OFF Parental
Press
Control, respectively.
3.
4.
Press
to change the Parental Control setting.
When prompted, enter your 4-digit PIN.
Tip: Turning off the DVR and turning it back on by pressing the Power button
on the DVR (or by pressing
on the remote) is an easy way to turn on
Parental Control for all the programming you have chosen to block.
PROGRAM RATING CATEGORIES
The following list describes the rating categories and codes associated with
movies and television programs in the United States.
TVY
The program is appropriate for children of all ages, and specifically
designed for children ages 2 through 6 years.
TVY7
The program is appropriate for children age 7 years or older. This rating
can include the code FV, indicating mild fantasy or comedy violence.
G, TVG
The program is appropriate for viewers of all ages.
PG, TVPG Parental guidance is suggested. The program contains material that
parents can find unsuitable for young children. This rating can also
include the following codes:
• V - Some violence
• S - Some sexual situations
PG-13
Parental guidance is suggested. Parents can find some program
material unsuitable for children under 13 years. Additional codes may be
included with the rating.
TV14
Parents are strongly cautioned as some program material may be
unsuitable for children under 14 years. This rating can also include the
following codes:
•
•
•
•
TVMA
V - Intense violence
S - Intense sexual situations
L - Strong indecent language
D - Suggestive dialog
Mature audience. The program is designed for an adult audience.
Parents can find the program material unsuitable for children under 17
years. This rating can also include the following codes:
• V - Graphic violence
• S - Explicit sexual situations
• L - Crude or indecent language
R
Restricted to adult audiences only. The program contains material
unsuitable for children.
NC17
Under 18 never admitted. The program or movie is considered too adult
(containing violence, sex, or drug use) for viewers under 17.
NR
This program or movie is not rated.
NR-Adult No one under age 17 permitted. This program or movie is not rated (NR)
but is considered too adult (containing violence, sex, or drug use) for
viewers under 17.
8
BLOCK RECORDINGS
WITH
PARENTAL CONTROL
You can keep others from watching a recording by using the Block feature. This
feature is useful if children also use the DVR and you do not want them to watch
certain recordings.
Note: To block a program that is scheduled to be recorded, block the program
rating from the General Settings menu. (For details, see “Blocking Channels,
Ratings, and Program Times” on page 7.) The DVR records the program, but
the recording can be watched only after entering your 4-digit Parental Blocking
PIN.
1.
2.
Recorded Program Options
"Soul Food"
Recorded: Fri 6/13
7:00pm 1hr 0min
Save: Until I erase
Options
Copy to VCR
Play "Soul Press
Food"
Press
Press
to access the Recorded List.
or
to select the recording you want to block.
3.
Press
to access the Recorded Program Options screen.
4.
Press
to select the “Block [title of program]” option.
5.
Press
6.
Enter your 4-digit PIN. The PIN Entry screen disappears, and appears next to
the Info icon in the Information area of the Recorded List screen. The lock icon
indicates that the program is blocked.
to record this program
Unblock "Soul
Food"
or press
for more recording options.
Erase
. The PIN Entry screen appears.
Preferences
Change Save Time
Choose Highlighted Item Options
Recorded List
WATCH BLOCKED RECORDINGS
Use either of the two methods described here to watch a blocked program.
PIN Entry
Enter your PIN to turn OFF Parental Control
and ALLOW viewing of All programs.
Clear PIN Entry
Cancel
Note: If the titles of blocked programs are blocked, see “Hiding or Viewing Blocked
Titles” on page 7.
1.
2.
to access the Recorded List.
Press
Choose one of the following options:
• Press
to select the “Play [title of program]” option, and then press
. Enter your 4-digit PIN.
Note: Entering your PIN in this screen allows viewing of all programs and
recordings.
• Press
or
to select the “Unblock [title of program]” option, and then
PIN Entry
This program is blocked.
Enter your PIN to unblock.
Clear PIN Entry
or
press
. Enter your 4-digit PIN.
Note: Entering your PIN in this screen turns off blocking only for this recording.
Cancel
SET FAVORITE CHANNELS
1.
Using the remote, press
2.
Press
3.
4.
5.
Press
.
or
to scroll to the channel you want to mark as a favorite, and
Press
then press
.
Repeat step 4 to mark other desired channels as favorites.
6.
Press
7.
Press
or
A
twice to access General Settings.
to scroll to Viewer: Favorites.
to save your favorite list.
to exit General Settings.
ACCESSING YOUR FAVORITE CHANNELS
1.
2.
Press
on the remote to access a channel you have set up as a favorite.
Continue pressing
until the channel you want to watch appears.
9
SEARCH
FOR
PROGRAMS USING
THE
PROGRAM GUIDE
DISPLAY THE PROGRAM GUIDE
1.
Press
2.
To close the guide, press
or
. The Program Guide closes and displays
the program that was playing in the Quarter screen.
to access the Program Guide.
PROGRAM GUIDE
The Information
area displays
information about
the program
selected in the
Program Guide.
The Browse By
area automatically
lists programs by
channel number,
but you can also
choose to list
programs by title,
theme, or date.
The Quarter screen
shows the program
you are tuned to.
HDLN
36
Headline News
4:00-5:00pm
Up-to-the-minute coverage of events.
36
CHANNEL
4:00pm
Wed 6/18
4:30pm
DSC
34 Great Chefs Great Chefs
CNN
35 Inside Politics Early Prime
HDLN
36 ' Headline News
ESPN
37 Bikes, Blades & Boards
TOON
38 Yu-Gi-Oh!
Yu-Gi-Oh!
Browse By
Date WED 6/18
5:00pm
4:02pm
5:3
Travelers
Hollyw
Headline News
NFL's Greatest
Pokem
Pokemon
The Broadcast Time
Bar lists the times
programs are scheduled to broadcast.
The Programs area
displays the title of
each program.
The Options area displays
additional options available.
SEARCH FOR A PROGRAM BY CHANNEL, TITLE, OR THEME
The DVR automatically lists programs by channel number, but you can change
this and list programs by title or theme.
to access the Program Guide.
1.
Press
2.
Press
. The Browse By area of the Program Guide displays the options: Title,
Channel, and Theme.
Press
or
to select one of the following options:
• Channel, which lists programs numerically by channel number
• Title, which lists programs alphabetically by program title
• Theme, which lists programs by theme, such as adventure, comedy, sports,
or news
3.
A
4.
. The Browse By area of the Program Guide displays the programs
Press
according to the option you selected.
5.
Press
to return to the previous screen displayed.
Note: The Browse By option only shows programs for the current date. For
information about searching on different dates, see “Search for a Program
by Date” on page 11.
10
SEARCH
FOR
PROGRAMS USING
THE
PROGRAM GUIDE, CONTINUED
BROWSE BY OPTIONS
HDLN
BROWSE BY CHANNEL
36
Headline News
4:00-5:00pm
Up-to-the-minute coverage of events.
36
CHANNEL
4:00pm
4:30pm
DSC
34 Great Chefs Great Chefs
CNN
35 Inside Politics Early Prime
HDLN
36 ' Headline News
ESPN
37 Bikes, Blades & Boards
TOON
38 Yu-Gi-Oh!
Yu-Gi-Oh!
Browse By
Date WED 6/18
Wed 6/18
4:02pm
5:00pm
5:3
Channel lists programs numerically
by channel number.
Travelers
Hollyw
Headline News
NFL's Greatest
Pokem
Pokemon
Note: HD next to a program indicates
that the program is a high-definition
broadcast.
BROWSE BY TITLE
Title lists programs alphabetically
by program title.
HDLN
36
Headline News
4:00-5:00pm
Up-to-the-minute coverage of events.
36
TITLE A-Z
PROGRAM
Hawaii Five-0
Hawthorne
Headline News
Health & Fitness
Hometime
Date WED 6/18
H
Browse By
Wed 6/18
4:02pm
TIME
CH
10:00pm
8:30pm
4:00pm
4:00pm
5:30pm
31
16
36
41
56
36
Headline News
4:00-5:00pm
Up-to-the-minute coverage of events.
36
News
Browse By
SEARCH
Note: A star next to a program
indicates that the program is currently
being broadcast.
BROWSE BY THEME
HDLN
THEME
Note: The Parental Guide information
is listed in the program description.
Wed 6/18
4:02pm
PROGRAM
TIME
CH
Headline News
Close-Up on C-SPAN
Headline News
Early Prime
Headline News
Date WED 6/18
3:00pm
4:00pm
4:00pm
4:30pm
5:00pm
36
25
36
35
36
FOR A
PROGRAM
BY
Theme lists programs by theme,
such as adventure, comedy, sports,
or news.
Note: New next to a program
indicates that the program is on for
the first time (first-run program).
DATE
1.
Press
2.
Press B . The Browse By area of the Program Guide displays a list of
upcoming dates.
Press
or
to select a date.
3.
to access the Program Guide.
4.
Press
. The Program Guide displays the programs scheduled to be
broadcast on that date.
5.
Press
to return to the previous screen displayed.
11
SELECT
A
PROGRAM
FROM THE
1.
Press
2.
Press
to move through the program listings to select the program you want
to watch.
3.
Press
.
• If the program is currently on, the Program Guide closes and the program you
selected appears in full-screen TV.
• If the program is scheduled for a future time, the Future Program Options
screen appears.
Choose one of the following Future Program options:
• To tune to the future program channel immediately, choose the “Tune
[channel number/name], immediately” option.
• To record the future program, choose the “Record [program name]” option.
• To set a reminder timer for the future program, choose the “Set Reminder
Timer for [program name]” option. When selected, an on-screen banner is
displayed 2 minutes prior to the start of the future program to remind you to
watch the program.
Future Program Options
Tune Ch. 238, HGTV, immediately
Record "Design On A Dime"
Set a Reminder Timer for "Design On A Dime"
Return to Guide
PROGRAM GUIDE
4.
to access the Program Guide.
Tip: When you select a future program in the Program Guide, you may also
to bypass the Future Program Options screen and record the
press
future program. See “Record a Program From the Program Guide” on page
16 for instructions.
12
CONTROL LIVE TV
AND
RECORDINGS
When you tune to a live program, the DVR begins buffering the program — that is,
making a temporary recording of it — so that you can:
•
•
•
•
•
Pause the live program for up to one hour
Rewind the program up to the point when you tuned to the channel
Fast-forward through the portion you have rewound
Instantly replay the last eight seconds of TV anytime you want
Save the buffered program to the DVR by recording it
STATUS BAR
The Status Bar appears when you pause, rewind, or fast-forward a live program or recording.
For a live program, red indicates missed
programming (from the beginning of the
program until the time you tuned to the
program).
For a recording, red indicates the portion
of programming that was not recorded.
Green Area Indicates Clear Area Indicates
Stored or Recorded
Programming Not
Programming
Aired Yet
Pause
American Idol
8:00 – 9:00pm
“Paused” Status Bar Program Name Triangle Indicates
Current Position in
Program
For a live program,
displays broadcast time
For a recording, displays
program length
Tip: Some TV programs display “scrolling” information across the bottom of the
TV screen (for example, news and sports “tickers”). The DVR on-screen status
to
bar and other graphics may cover up information scrolling on-screen. Press
remove the status bar and any on-screen DVR graphics or banners.
PAUSE
A
LIVE PROGRAM
OR A
RECORDING
1.
Press . The action freezes and the Status Bar appears briefly in the Pause
position at the bottom of the screen. For both recorded and live programs, the
DVR remains in pause for up to 1 hour.
2.
Press
REWIND
1.
2.
again or press
OR
to resume playing the program.
FAST-FORWARD
A
LIVE
OR
RECORDED PROGRAM
Make sure that the program or recording is not Paused. If it is paused, press
to resume normal play. If you press
or
while in Pause mode, the
program will only advance or rewind one frame.
Rewind or fast-forward the buffered program or recording in any of four speeds:
• The first press ( or ) increases the speed to 4 times normal speed.
• The second press ( or ) increases the speed to 10 times normal speed.
• The third press (
or
) increases the speed to 32 times normal speed.
• The fourth press (
or
) increases the speed to 128 times normal speed.
Fast Fwd
A green arrow ( or ) indicates how fast you are advancing or rewinding a
program. Each time you increase the speed, another arrow appears.
Rewind
3.
. The Status Bar indicates the Play
To resume play at normal speed, press
mode and the program plays at normal speed.
13
CONTROL LIVE TV
AND
RECORDINGS, CONTINUED
USE INSTANT REPLAY
Press
to watch the last 8 seconds of a live or recorded program again. Every
additional press jumps back 8 more seconds.
USE SLOW MOTION
1.
2.
While watching live TV or while playing a recording at normal speed, press
once. The action slows.
again.
To resume play in normal speed, press
WATCH ACTION FRAME
BY
FRAME
Analyze sports events and other programs by watching the action frame by frame.
When you watch frame by frame, you fast-forward or reverse the action one frame at a
time.
1.
2.
3.
. The action stops.
Press
Fast-forward or reverse action one frame at a time by following these steps.
To Move Action
Press
Result
Back by one frame
Each time you press
, action
moves backward by one frame.
Forward by one frame
Each time you press
, action
moves forward by one frame.
.
To resume play at normal speed, press
Tip: To remove the status bar and any on-screen DVR banners, press
.
CATCH UP WITH A LIVE TV PROGRAM
When you pause or rewind a live program, the program continues to be broadcast.
You can continue watching the buffered program (delayed TV), or you can catch up
.
with the live broadcast by pressing
14
USE PICTURE-IN-PICTURE
TURN PIP ON
AND
OFF
The PIP feature can only be activated while you are watching TV in full screen mode. You
must remove any on-screen menus and exit the program guide to turn the PIP feature on.
25
When you turn on the PIP feature, you can watch two channels at once. One channel
appears as a full-screen image; the other channel appears as a small image within
the full-screen image.
GOLF
Full-screen image
in main TV screen
Channel Banner appears
briefly under PIP screen
PIP screen within
the full-screen image
1.
While watching a program in full screen mode, press PIP . The PIP screen appears
within the full screen, and a channel banner appears briefly under the PIP screen.
Note: You hear the sound of only the program that is shown in the full screen.
2.
To turn off the PIP screen, press PIP
again.
Note: If you press
when the PIP feature is on, a channel banner
appears for both screens. If either program is currently being recorded, its
channel banner shows the Recording Now
symbol.
Tip: The PIP keys are located at the bottom of the remote (see inside the front
cover of this guide for an illustration of the remote).
CHANGE
THE
CHANNEL
OF THE
PIP SCREEN
1.
If the PIP feature is not on, turn it on by pressing PIP
2.
Press PIP
MOVE
THE
or PIP
SWAP
THE
Press PIP
to change the PIP channel.
LOCATION
Each time you press PIP
the main TV screen.
.
OF THE
PIP SCREEN
, the PIP screen moves clockwise to the next corner of
MAIN SCREEN
AND THE
PIP SCREEN
to swap the TV program in the PIP screen with the program in the main screen.
Full-screen program in
main TV screen
PIP screen
RECORDINGS
AND THE
PIP SCREEN
If you are . . .
Recording the program
in the main TV screen...
And you . . .
Have the PIP feature on, the recording does not capture the PIP
screen in the recording. The recording shows only the program
in the main TV screen.
Recording the program
in the PIP screen...
Turn off the PIP feature, the program continues to be recorded.
Recording the program
in the PIP or the main
TV screen...
Press
; an information banner appears for both the PIP and
main TV screens. If a program is being recorded,
appears
in the channel banner. The recording does not capture the
channel banner in the recording.
15
RECORD PROGRAMS
Feel free to do the following without affecting the DVR recording:
•
•
•
•
•
•
•
Continue to watch the channel while the recording is being made.
Pause, fast-forward, or rewind the program.
Change channels (only if you are recording one program).
Turn off the TV.
Turn on the PIP feature.
Display the Recorded List screen or the Program Guide.
Playback a recording.
RECORD
A
PROGRAM YOU ARE WATCHING
When you press Record while watching a live program, the DVR records all of the
current program that you have buffered since you tuned to that channel.
For example, if you tune to a live, 1-hour program at 8:00 p.m., and you press record
at 8:40 p.m., the DVR saves the first 40 minutes and continues to record for the next
20 minutes, until the program is scheduled to end.
Confirm Recording
"The Jungle Book"
Wed: 6/18
Save: 14 Days
START
STOP
RECORD
SAVE TIME
to record this program
All episodes
9:00pm
episode
14 Days
or press
forOne
more
recording options.
1.
to start recording anytime during the program. The program records
Press
from the time that the channel was tuned.
2.
In the Confirm Recording screen, use the arrow keys
Press
7:00pm
Preferences
Accept recording
recording options and press
Cancel changes
Options
RECORD
WSB
02
Channel 2 Action News
Tue 5:00-6:00pm
(60 min)
CHANNEL
5:00pm
5:30pm
PBY_B 1915 World View News
DVR
1 Recorded Programs List
WSB
2 Channel 2 Action News
WATL
3 Ricki Lake
WGNX
4 Frasier
Frasier
Browse By
Date TUE 1/15
6:00pm
6:3
Channel 2 Action News
Steve Harvey Simpso
Judge Judy
PROGRAM FROM
.
THE
PROGRAM GUIDE
Press
2.
Press the arrow keys to select a current or future TV program, and then press
3.
In the Confirm Recording screen, choose your recording options and press
The program to be recorded is highlighted in red in the Program Guide.
.
RECORD MULTIPLE EPISODES
OF A
.
A
.
PROGRAM
1.
Press
2.
Press the arrow keys to select a program, and then press
3.
4.
In the Confirm Recording screen, choose All Episodes and press A .
In the All Episode Recording Options screen, choose one of the following options:
•
First Run only on this channel
Note: This option is subject to availability in your area.
•
On this channel at any time
•
On this channel this day in this time slot
•
On this channel any day in this time slot
Note: This option records the program any day that the program airs
in this time slot.
5.
Press
to save your All Episode recording settings and return to the Program
Guide to continue watching TV.
All Episode Recording Options
HGTV (Ch 238)
Thu: 11/13
Options
On this channel at any time
First Run only on this channel
On this channel any day in this time slot
Cancel changes
.
SAVE LATEST
4 Episodes
5 Episodes
All episodes
1 Episodes
2 Episodes
16
to choose your
1.
"Design On A Dime"
Choose highlighted item
A
A
.
SAVE LATEST OPTIONS
When scheduling an All Episodes recording, you can choose to
save from 1 to 5 of the most recent episodes. Or, you can save
every episode until you cancel the recordings or run out of storage
space.
For example, you save the two most recent episodes of a
program that is broadcast every weeknight. When the DVR
records the program on Wednesday, it automatically deletes the
Monday program, and the Tuesday and Wednesday recordings are
now saved. On Thursday, the Thursday episode is recorded, the
Tuesday recording is erased, and so on.
For more information about saving recordings, see “Save
Recordings” on page 21 of this guide.
RECORD PROGRAMS, CONTINUED
RECORD TWO LIVE PROGRAMS
Channel Change Notice
You are now recording "The Jungle Book"
Press
to change to the other recording
Stop Recording
Cancel
If, while recording two programs, you
try to tune to another channel, the
DVR displays a Channel Change
Notice to let you know that you must
stop a recording to change channels.
For details, see “Cancel a Recording
That Is In Progress” on page 19.
AT
ONCE
1.
Press
to record the show that you are watching, and then press
2.
Tune to the second show you want to record, press
A
.
, and then press
A
.
Note: When you record two live programs at the same time, you can watch
them both while they record using PIP, or you can watch a previously
recorded program; but you cannot tune to another channel and watch a third
program live.
CONFIRM YOUR RECORDINGS
There are three ways to find channels that are currently being recorded:
•
•
•
Turn on the PIP feature and press
. Both channel banners appear, and the
symbol is displayed if one or both of the channels are currently recording.
Press
. Use the arrow keys to move through the Recorded List. A program
highlighted in red indicates that the program is currently recording.
Press
record.
RECORD
A
. A program highlighted in red is currently recording or is scheduled to
PAY-PER-VIEW EVENT
If your service provider allows, you can record pay-per-view (PPV) events. To record
a PPV event, follow these steps:
1. Purchase the event and wait for it to begin playing.
2. Record the event just like any other live program. For details, see “Record a
Program You Are Watching” on the previous page.
SCHEDULE FUTURE PAY-PER-VIEW RECORDINGS
1.
If the Program Guide is not shown, press
2.
Use the arrow keys to find the future PPV event you want to record. Press
press
3.
.
or
to display the Future Programs Option screen.
When you press
, choose from one of the following options:
• To buy and record the event, press
Confirmation Screen will appear.
• To buy the PPV event, press
B
A
to access the “Buy” window. The Record
to access the “Buy” window.
• To exit without purchasing a future PPV event, press
Program Guide.
to return to the
Note: You must have a PPV advertisement window open to purchase a future
PPV event.
17
WATCH RECORDINGS
Note: If you see Blocked Title instead of the title of a program, you are hiding the
display of blocked program titles (a parental control function). See “Hiding or
Viewing Blocked Program Titles” on page 7 for more information.
DISPLAY A LIST OF YOUR RECORDED PROGRAMS
Recorded List
"The Jungle Book"
1.
USA (Ch 67)
Record: 1 Episode
Save: 1 Day
Recorded Programs
PGA Golf Press
Date
The Jungleor
Book
press
Length
1hr 30min
Wed
7:00pm
for
more6/18
recording
options. 2hr 0min
Dr. Phil
Fri
Options/Play
Time
to record
program
Sun this
6/15
2:30pm
6/13
3:10pm
Scheduled Recordings
50min
2.
Preferences
Press
. Programs that have been recorded, as well as those that are
currently being recorded, appear in this list.
Note: Programs currently being recorded are highlighted in red.
To exit from the Recorded List screen and display full-screen TV, press
again or press
.
WATCH YOUR RECORDED PROGRAMS
Recorded Program Options
Play back your recordings whenever you want. You can even record one or two
programs live while you play back any program you recorded earlier. However, you
can play back only one recording at a time.
"The Jungle Book"
Wed 6/11
7:00pm 2hr 0min
Save: 1 Day
Options
Change Save Time
Press
Copy to VCR
to record this program
Play "The Jungle
Book" for more recording options.
or press
Block "The Jungle Book"
1.
2.
Press
Press
.
or
3.
Press
Options/Play. If you select the recording that you have most
recently watched, the recording begins playing immediately from the scene you
last viewed. Otherwise, the Recorded Program Options screen appears with the
option “Play [title of program]” selected.
4.
Press
. The recording begins playing. You can use the pause, rewind, fastforward, or any other remote keys to navigate during playback.
5.
When you press
(or when the recording finishes), the Playback Status
screen appears. To exit from this screen and return to live TV, press
,
to select the recording you want to watch.
Preferences
Erase
Choose Highlighted Item Options
Recorded List
Playback Status
"Design On A Dime"
Recorded: Thu 11/13
10:00PM 30min
Save: All Episodes
Options
Stopped at 19 min
(11 min left)
Copy to VCR
Play from beginning
Play from current position
Running time: 30 min
or press
Skip to end
Erase
Choose highlighted item
Live TV
or
.
Recorded List
Note: If the Playback Status screen remains for 5 minutes, the DVR
begins playing the recording to prevent screen burn-in.
WATCH A RECORDING THAT IS IN PROGRESS
Currently Recording Program Options
1.
2.
Press
Press
3.
Press
Options/Play. The Currently Recording Program Options screen
appears.
Press
or
to select one of the following options:
• Play from beginning
• Play from current location
• Stop recording and erase
• Stop recording and save
"Design On A Dime"
Save: Until I erase
4.
Options
Play from current position
Play from beginning
Stop recording and save
Stop recording and erase
Choose highlighted item
Recorded List
5.
HDLN (Ch 36)
Record: 1 Episode
Save: 1 Day
Scheduled Recordings
Press
Law & Order
SVU
Headline News
or press
Dr. Phil
Edit
Date
to recordWed
this program
6/18
Time
9:00-10:00pm
Thurecording
6/19 options.
4:00-5:00pm
for more
Fri
Recorded List
6/20
3:00-4:00pm
Preferences
If a program is currently being
recorded,
appears in the
Information area of the screen.
18
Press
DISPLAY
FUTURE
Scheduled Recordings
"Headline News"
.
or
to select the program that is currently being recorded.
.
A
LIST
OF
PROGRAMS SCHEDULED TO RECORD
IN THE
1.
Press
.
2.
Press A . The Scheduled Recordings screen appears with a list of all the
programs you have scheduled to record along with programs that are currently
being recorded.
Note: Programs currently being recorded are highlighted in red.
,
CANCEL RECORDINGS
CANCEL
A
SCHEDULED RECORDING
You can cancel a scheduled recording at any time.
Confirm Cancel
"Design On A Dime"
HGTV (Ch 238)
Mon: 11/15 8:00-8:30pm
Record: All episodes, first run
Save: All episodes
Are you sure you want to cancel recording
all episodes of this program?
Yes, cancel
1.
Press
2.
3.
Press
Press
.
4.
Press
5.
Press B . The Confirm Cancel screen appears and displays the question “Are you
sure you want to cancel recording this program?”
6.
Press
A
CANCEL
A
to access the Scheduled Recordings screen.
or
to select the recording you want to cancel.
A
. The Edit Scheduled Recording screen appears.
No
.
RECORDING THAT IS
IN
PROGRESS
You can stop a recording in progress at any time. When you stop a recording, you
can save what has been recorded or erase the entire recording.
1. If you are not watching the recording, tune to the channel that is being recorded.
Stop Recording
Do you want to stop recording?
"Design On A Dime"
HGTV (Ch 238)
Mon: 11/15 8:00-8:30pm
Record: All episodes, first run
Save: All episodes
Options
2.
3.
Press
to display the Stop Recording screen.
Press
or
to select either the option “Stop and save” or the option “Stop
and erase.”
4.
Press
. The Record indicator on the DVR LED display turns off (unless
another program is recording at the same time).
Stop and save "Design On A Dime"
Stop and erase "Design On A Dime"
Continue recording "Design On A Dime"
Choose highlighted item
SCHEDULE MANUAL RECORDINGS
Manual recording is the action of setting up a recording through the Preferences
screen by manually specifying the channel and the start and stop time, independent
of the program guide. More than one program can be recorded manually at one time.
Preferences
Save time is 1 Day
Press
to set how long future
recordings will be saved.
1.
Press
2.
3.
Press
Press
4.
then press
.
In the Preferences screen, set your channel, start and stop time, and save
Options
Recording space used
Change Save Time for future recordings
Schedule a new Manual Recording
Sort Recorded List alphabetically
Turn ON Auto Erase
Scheduled Recordings
Recorded List
to access the Recorded List screen.
B
to access the Preferences screen.
or
to select the “Schedule a New Manual Recording” option, and
options, and then press
A
to save your changes.
Note: A manual recording is displayed as “Manual Recording” in the
Recorded List screen.
19
CHECK RECORDING SPACE
The Recording Space Used feature shows both the percentage of space currently
used and lists the number of recordings stored.
Preferences
Recording Space Used:
6%
You currently have 2 recordings.
Options
1.
Press
2.
Press B to display the Preferences screen. The Information area displays the
Storage bar, which shows the percentage of recording space currently used. In
the graphic shown at left, the Storage bar indicates that a small portion (6%) of
the DVR storage space is being used.
Note: If the Storage bar indicates that over 90% of the space is being used,
consider some of the suggestions in the “Maximize Your DVR’s Storage Space”
section for more storage options.
3.
Press
Sort Recorded List by time recorded
Turn ON Auto Erase
Recording space used
Change Save Time for future recordings
Schedule a new Manual Recording
Scheduled Recordings
Recorded List
.
to close the Preferences screen.
MAXIMIZE YOUR DVR’S STORAGE SPACE
IMPORTANT! The DVR is intended to be a short-term storage device. Use the
following guidelines to make the most efficient use of your DVR’s storage space.
•
•
•
•
Set your default Save Time setting to 14 days or less. Setting it to “Until I Erase”
causes the storage space to fill up more quickly. (For details, see “Change the
Default Save Time Setting for Future Recordings” on page 21.)
After you watch a recording, decide to either erase it or keep it permanently by
transferring it to a VCR tape. (For details, see “Erase a Recording” on page 22,
or “Copy Recordings From Your DVR to a VCR Tape,” on page 23.)
Turn on the Auto Erase feature. This feature automatically erases the oldest
recordings whenever additional space is needed to record a new program.
However, this feature does not erase recordings that have a Save Time of “Until
I Erase.” These recordings remain until you decide to erase them. (For details,
see “Automatically Erase Oldest Recordings,” on page 22.)
Connect your 8300 to an optional external Serial ATA (SATA) hard disk drive for
expanded recording capability. (For details, see “Add Storage With a SATA Hard
Disk Drive [Optional]” on page 24.) Note: SATA connectivity is only available on
the 8300 DVRs.
HOW MANY HOURS
OF
PROGRAMS CAN I STORE
ON
MY DVR?
Explorer Model
*Storage Capacity
8000
Up to 50 hours of digital non-HD programs
(based on an 80 GB capacity hard drive)
8000HD
Up to 90 hours of digital non-HD programs
Up to 20 hours of HD programs
(based on a 160 GB capacity hard drive)
8240, 8300, 8300MR
Up to 50 hours of digital non-HD programs
(based on an 80 GB capacity hard drive)
8240HD, 8300HD, 8300HDC,
8300HD MR
Up to 90 hours of digital non-HD programs
Up to 20 hours of HD programs
(based on a 160 GB capacity hard drive)
*The total program hours that can be stored depends upon the format and data rate of the
programming source, as well as the DVR hard drive storage capacity.
20
SAVE RECORDINGS
Whether you record a program you are watching live or schedule a program to be
recorded in the future, you have three ways that you can select how long to save the
recording:
•
Use the default Save Time setting. Using the default Save Time setting is the
quickest way to save recordings because you don’t need to select the save time
each time you record a program. For details, see the “Change the Default Save
Time Setting for All Future Recordings,” next in this guide.
•
Select the Save Time when you schedule a new recording.
•
Change the Save Time after recording a program. For details, see “Change
the Save Time of a Single Recording,” later in this guide.
IMPORTANT! The DVR is not intended as a long-term storage device. When saving
recordings, consider the impact of the save time on your storage space.
CHANGE THE DEFAULT SAVE TIME SETTING FOR ALL FUTURE RECORDINGS
When the DVR leaves the factory, its default Save Time is set to 14 days. Using this
setting, the DVR automatically saves each recording for 14 days. At the end of 14
days, the DVR erases the recording to make space for other programs that you
want to record. You can change this setting from 14 days to 1, 2, or 7 days, or to
“Until I Erase.”
IMPORTANT! When you change the default Save Time setting, it affects all future
recordings, not the programs that were previously recorded.
Preferences
Save time is 1 Day
Press
to set how long future
recordings will be saved.
Options
Turn ON Auto Erase
Recording space used
Change Save Time for future recordings
Schedule a new Manual Recording
1.
Press
2.
3.
Press
Press
4.
5.
Press
Press
6.
Press
to save your time selection and return to the Preferences screen. The
new default Save Time setting appears in the Information area of the Preferences
screen.
Sort Recorded List alphabetically
Scheduled Recordings
Recorded List
CHANGE
.
B
to access the Preferences screen.
or
to select “Change Save Time for future Recordings.”
to access the “Save Time” options.
or
to select your desired Save Time.
THE
SAVE TIME
OF A
SINGLE RECORDING
After recording a program, you can change how long the DVR saves the recording.
1.
2.
Press
Press
.
or
3.
Press
. The Recorded Program Options screen appears.
4.
Press
. The option “Change save time” is selected.
5.
Press
. The Change Save Time screen appears.
6.
Press
7.
Press
. In the Information area of the screen, the message “One moment
please” appears, and the new save time displays on the Recorded List screen.
or
to select the recording whose Save Time you want to change.
to select the new Save Time.
21
ERASE RECORDINGS
AUTOMATICALLY ERASE OLDEST RECORDINGS
To ensure that there is enough storage space for new recordings, turn on the Auto
Erase feature. When Auto Erase is on, oldest recordings are automatically erased
one by one until there is enough space to record your new programs.
Note: Recordings with save times of “Until I Erase” are not automatically erased.
Confirm Auto Erase ON
Are you sure you want your oldest recordings
automatically erased if space is needed?
PLEASE NOTE: Recordings marked ’Until I Erase’ will not
be erased until you delete them manually.
Yes, turn Auto Erase ON
Cancel
1.
Press
2.
3.
Press
Press
4.
Press
. The Confirm Auto Erase On screen appears and displays the
question “Are you sure you want your oldest recordings automatically erased if
space is needed?”
.
B
to access the Preferences screen.
to select “Turn ON Auto Erase.”
5.
Press A . The option now shows “Turn OFF Auto Erase” and the Information
area displays the current status of the Auto Erase feature.
IMPORTANT! If you have both the “Auto Erase ON” and the “Save Latest - All
Episodes” options set, you will lose your oldest recording if you do not have the
available recording space on your DVR. See page 16 for information on setting
the “Save Latest - All Episodes” option.
ERASE
A
SINGLE RECORDING
Erase a recording and permanently remove it from the DVR. Erasing programs that
you no longer want to watch creates space to record and store other programs. If
the DVR becomes full, some programs may be partially saved or not saved at all.
22
1.
2.
Press
Press
.
or
3.
4.
Press
Press
to access the Recorded Program Options screen.
to select “Erase.”
5.
Press
. The Confirm Erase screen appears and displays the question “Are
you sure you want to erase this recording?”
6.
Press A . The message “One moment please” appears in the Information area
of the screen, and the Recorded List screen displays with the program no longer
showing in the list.
to select the recording you want to erase.
COPY RECORDINGS
YOUR DVR
FROM
TO A
VCR TAPE
The Copy to VCR feature lets you copy recordings from your DVR to a VCR tape.
WARNING: Avoid electric shock. Unplug all electronic devices
before connecting or disconnecting any device cables to the DVR.
CABLE
OUT
OUT 1
OUT 2
Pr
L
Pb
R
Notes:
A
U
D
I
O
OPTICAL
Y/V
DIGITAL
AUDIO OUT
VIDEO
AUDIO OUT
S - VIDEO
OUT
RF IN
L
VIDEO
IN
R
AUDIO
IN
L
VIDEO
OUT
R
RF OUT
AUDIO
OUT
VCR
T11304
COPY
1.
Recorded Program Options
2.
3.
4.
"Design On A Dime"
Recorded: Mon 11/15
12:00pm 30min
Save: Until Erased
Options
Erase
Change save time
Copy to VCR
Play "Design On A Dime"
Block "Design On A Dime"
Choose highlighted item
Recorded List
Copy to VCR
"Design On A Dime"
Start copy
Cancel copy
RECORDING
TO A
VCR TAPE
Connect the VCR to the OUT 2 connection on the back of the DVR.
Note: Connecting to your VCR using the OUT 2 outputs allows you to watch or
record another program or even change channels in the Main screen, without
affecting the copy in progress.
Make sure that a tape is in your VCR and that the VCR is set to record.
Press
.
Press
or
to select the recording you want to copy to the VCR. Make
sure to select a program that is not currently being recorded.
5.
Press
to access the Recorded Program Options screen.
6.
Press
to select “Copy to VCR.”
7.
8.
Press
to access the Copy to VCR screen.
Make sure your VCR is properly connected to your DVR outputs, and press
Record on your VCR.
Recorded: Mon 11/15
12:00pm 30min
Save: Until Erased
Connect VCR inputs to cable box outputs "OUT 2 (VCR)."
Place a blank tape in your VCR.
Set your VCR input to record from the cable box.
Press RECORD on your VCR.
A
• This graphic shows the 8300HD back panel layout. Other DVR back
panel layouts will vary.
• It is possible to record live TV directly to a VCR tape (instead of
copying your recording) by connecting the main OUT 1 outputs
directly to the VCR inputs. However, when you do this, all remote
activity (bringing up menus, pausing, rewinding, etc.) will also be
recorded on the VCR tape.
Press A to begin copying to the VCR tape. The Recorded List displays the VCR
symbol
for the recording that is copying to VCR.
10. After the recording finishes copying to the VCR tape, playback the VCR tape in
your VCR to verify that the recording was successfully copied.
Note: Some DVR recordings, particularly pay-per-view events, cannot be archived
to VCR tape, due to copy protection settings within the program content. If you
copy a DVR recording to a VCR tape, do not delete the DVR recording until you
verify that you can successfully play the recording on the VCR tape. You have to
play the recording on the VCR tape to verify that the archiving process was
successful.
11. If the DVR program was successfully recorded to VCR tape, you can delete the
DVR recording.
9.
Notes:
•
•
You can watch the copying in progress through the PIP. You can turn the PIP
feature on and off without affecting the copy in progress. A “Copying to VCR”
banner displays for 3 seconds when you turn the PIP feature on.
While copying is in progress, you are free to change channels in the main screen.
You can even simultaneously record 2 live programs while you copy a recording to
a VCR tape.
23
ADD STORAGE
WITH A
SATA HARD DISK DRIVE (OPTIONAL)
On the 8300-series DVRs, you can use a Serial ATA (SATA) hard disk drive for
increased recording capability. Contact your service provider for a list of approved
hard drive models that you can use with the 8300s.
IMPORTANT! You cannot choose between recording to the internal DVR
hard drive or recording to the SATA drive. If a SATA drive is connected to
the DVR, a program is automatically recorded to the hard drive with the
most available space. Recordings are not split across both the internal and
external drives.
Note: Recordings stored on the SATA drive can only be played back on the
DVR originally connected to the SATA drive. For instance, you cannot record
programs to the SATA drive, remove the drive, and then connect the drive to
a different DVR for playing back programs.
For instructions for connecting a SATA hard disk drive to the DVR, refer to the
connectivity guide for your DVR model.
WARNING: Avoid electric shock. Unplug all electronic devices
before connecting or disconnecting any device cables to the DVR.
CONNECTING
THE
SATA DEVICE
TO THE
DVR
When a new SATA device is detected by the DVR unit, one of the following banners
appears, indicating that you need to format the device to work with the DVR.
Follow the on-screen instructions to format the device.
Because your SATA drive was formatted to work with your DVR unit, should you need
to disconnect, then reconnect the SATA hard disk drive to your DVR, one of the
following banners appears, indicating that the external device was properly
connected.
Press
to close the banner.
IMPORTANT! Do not power down the SATA drive while the DVR is powered on.
Doing so may result in lost or stopped recordings.
24
ADD STORAGE
WITH A
SATA HARD DISK DRIVE (OPTIONAL), CONTINUED
TROUBLESHOOTING THE SATA DRIVE
If you encounter problems when connecting or disconnecting your SATA hard disk
drive, use the following warning banners to troubleshoot any drive issues.
WARNING: Avoid electric shock. Unplug all electronic devices
before connecting or disconnecting any device cables to the DVR.
If the SATA drive is
improperly disconnected,
one of the following warning
banners appears.
If you improperly disconnected the SATA drive from
your DVR, then attempt to
reconnect the drive to your
DVR, a warning banner
appears. Follow the on-screen
instructions to restart the DVR.
If the power or data cables
for the SATA drive are
unplugged from the DVR,
a warning banner appears.
Check the DVR to make sure
the power and data cables are
properly plugged in.
If the DVR cannot read
the SATA drive, a warning
banner appears. Follow the
on-screen instructions to
format the SATA drive.
Attention
The external recording device is not functioning properly.
Check to make sure the power and data cables are plugged in properly.
Close
Attention
The external storage device appears to be corrupted.
Format this external storage device?
NOTE: Existing recordings on this external storage device will be erased.
If you press
Cancel, the external storage device will not be available.
Yes, Format
Cancel
25
MAXIMIZE
THE
LIFE
OF
YOUR DVR
TURN OFF YOUR DVR WHEN NOT IN USE
To maximize the life of your DVR, you should turn Off the DVR when it is not in use.
When the DVR is powered Off (and plugged into an active outlet), all scheduled
recordings are performed automatically – and your recordings are protected.
and then
on your remote, or press
To turn off your DVR, simply press
Power on the front panel of the DVR. The Power light turns off; but, because the
DVR is still plugged in to an active outlet, your scheduled recordings still occur.
IMPORTANT! The Parental Control feature is automatically activated as a
precaution when you turn your DVR back on. For more information about the
Parental Control feature, see page 7.
PROVIDE ADEQUATE VENTILATION
This product has openings for ventilation that protect it from overheating. To ensure
the reliability of this product, do the following:
• Do not block or cover these openings.
• Do not place entertainment devices (such as VCRs or DVDs), lamps, books,
vases with liquids, or other objects on top of this product.
• Do not place this product in any of the following locations:
- On a bed, sofa, rug, or similar surface
- Near heat sources such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat
- In an enclosure, such as a bookcase or rack, unless the installation provides
proper ventilation
26
THE DVR AND YOUR MULTI-ROOM DVR SYSTEM
With the Multi-Room DVR system, you can record your favorite
programs on the 8300 DVR server, and then use your other
non-DVR Scientific Atlanta digital set-tops (client set-tops) to play back
and control recordings stored on the Multi-Room DVR server.
Notes:
•
•
•
Multi-Room DVR service is subject to availability in your area. For
more information, contact your service provider.
The Multi-Room DVR feature is only available on the 8300 MultiRoom DVR models. As a future enhancement, the Explorer 3250HD™
client set-top will be able to play back HD recordings.
Not all Scientific Atlanta digital set-tops can be used as clients. For
more information, contact your service provider.
This section describes how you can set up your Multi-Room DVR
system to restrict or block the viewing of certain programs and
recordings to specific set-tops. If you do not plan to block programming
or recordings, you may skip this section.
USING PARENTAL CONTROLS
ON THE
CLIENT SET-TOPS
If you block a recording on the Multi-Room DVR server, you must activate Parental
Controls in each room to keep other client set-tops from watching that recording.
Each set-top (server and client) has its own independent Parental Control setting.
You must set it the way you want it to work in every room by following two steps.
1. Press
to open Quick Settings.
2. Turn Parental Controls ON or OFF.
3. Block programming by channel, rating, or time within General Settings.
Some important points to remember about Parental Controls:
•
•
•
For existing recordings on the Multi-Room DVR server, any recording (after it is
recorded) can be manually blocked by choosing the Block option when selecting
it from the Recorded List. Regardless of what blocking is set on the server, each
client blocks content according to its own Parental Control settings. On each
client, all ratings and channels blocked in General Settings will remain blocked
until you turn Parental Controls off.
For future scheduled recordings, any rating, channel, or time slot can be set for
blocking within General Settings on the Multi-Room DVR server. These blocking
settings do not automatically carry over to the client set-top even if the Parental
Controls are activated on the client set-top. The client set-top must block the
same future programming (by channel, rating, or time) within its General
Settings so the blocking takes effect.
Unblocking a recording on one client set-top will not unblock the same recording
on other client set-tops or on the Multi-Room DVR server.
Use one of the following steps to quickly activate Parental Controls on either the
Multi-Room DVR server or on the client set-top.
•
•
Press the front panel Power button, or press
and then
on the remote to
power off the set-top. The next time the client set-top is powered on, all the
blocking you set up will take effect.
Turn on the Parental Controls in the Quick Settings menu (see page 7).
27
THE DVR AND YOUR MULTI-ROOM DVR SYSTEM, CONTINUED
SET UP PARENTAL CONTROL ON MULTI-ROOM DVR CLIENT SET-TOPS
After you have decided how to restrict viewing for the set-tops in your home, set up a
Parental Control PIN for each client set-top. All of the set-tops in your system need a
Parental Control PIN to view blocked programs. If you do not plan to block
programming or recordings, you do not need to set up a Parental Control PIN.
ON
THE
CLIENT SET-TOP:
When selecting a recording that the MultiRoom DVR server has blocked, users must
enter a Parental Control PIN.
Note: Turning off parental control here does
not unblock this recording on other TVs.
Recorded List
"The Jungle Book"
Save: Until I erase
Recorded Programs
Friends
ER
The Jungleor
Book
press
Divine Design
Date
Play
11/12
9:00pm
Wed 11/17
10:00pm
Scheduled Recordings
PIN Entry
Length
30min
1hr 0min
Mon
11/15
7:00pm
for
more
recording
options. 2hr 0min
Fri
NYPD Blues
Time
Wed 11/10
8:30pm
to record
program
Thur this
11/11
9:00pm
Press
Enter your PIN to turn OFF Parental Control
and ALLOW viewing of this PROGRAM only.
30min
1hr 0min
Preferences
Clear PIN Entry
Cancel
The symbol indicates that a recording
is blocked and can be played only by
entering a Parental Control PIN.
SELECTING
A
PARENTAL CONTROL PIN
When selecting a number for the Parental Control PIN, keep the following in mind:
•
•
The PIN must contain four digits.
You may use a PIN that is unique to each Multi-Room DVR system set-top in
your home, or you may use the same PIN for all Multi-Room DVR system settops.
•
You may use a PIN that is the same or different from the pay-per-view PIN.
After you have selected a 4-digit number to use as a Parental Control PIN, set up the
PIN by following the steps in “Setting or Changing the Parental Control PIN” below.
SETTING
PIN Entry
Enter your CURRENT PIN:
Clear PIN Entry
Cancel
When you enter a PIN
in the PIN Entry
screen, an asterisk
appears each time
you press a number
key. Displaying an
asterisk instead of the
number itself keeps
others from learning
your PIN and lets you
know that the set-top
has accepted the
number.
OR
CHANGING
THE
PARENTAL CONTROL PIN
Each Multi-Room DVR server and client set-top leaves the factory with a Parental
Control PIN of 0000. Follow these instructions to change the factory-set PIN to
your own PIN or to change your own PIN at any time in the future.
1.
While aiming the remote at the front of a set-top, press
2.
Settings menu appears.
Press
or
to select Block:PIN.
3.
4.
Press
Press
5.
6.
Press
. A PIN Entry screen appears.
Enter the current PIN by performing one of the following tasks:
• If you are changing the PIN for the first time, press the numeric keys to enter
0000 (the number of the factory-set PIN). The PIN Entry screen prompts you
to enter your new PIN.
• If you are changing your current PIN, press the numeric keys to enter your
current PIN. The PIN Entry screen prompts you to enter a new PIN.
Press the numeric keys to enter your new PIN. The PIN Entry screen prompts
you to re-enter your new PIN for confirmation.
Press the numeric keys to enter your new PIN again. The General Settings
menu appears.
7.
8.
9.
twice. The General
. The options for Block: PIN appear.
or
to select the option Change.
To close the General Settings menu, press
.
Note: For more information about turning the parental control feature on
and off, see “Turning On and Off Parental Control” on page 7.
28
FREQUENTLY ASKED QUESTIONS
QUESTIONS ABOUT
THE
DVR
Q. What happens if the DVR temporarily loses power?
A. The recordings that were saved before the power loss are preserved. Future
recording schedules are also preserved. You miss only the recordings that were
scheduled to be made or the portion of the program that aired while the power
was out.
Q. Where can I find details on installing the DVR?
A. Access Scientific Atlanta’s Explorer eClub Web site at
www.scientificatlanta.com/explorerclub. It contains documentation on a
number of topics, including installation and setup. You need the model number
of the DVR and your email address to access the eClub Web site.
Q. Why doesn’t the DVR respond when I press the keys on the remote?
A. Consider the following suggestions when troubleshooting your remote:
• Your remote may not be in the cable mode. To use any of the features
provided by the DVR, the remote must be in cable mode.
• Verify that the batteries in your remote are positioned correctly. If the batteries
are positioned correctly, you may need a new set of batteries.
• Verify that the IR Sensor on the DVR front panel is not blocked or covered.
Q. I want to move the DVR to a new location. How do I do this?
A. After disconnecting the DVR from your TV and other components, reconnect it by
following the instructions in your DVR installation guide. If you can’t find your
copy of this guide, log on to Scientific Atlanta’s Explorer eClub Web site at
www.scientificatlanta.com/explorerclub. It contains documentation on a
number of topics, including installation and set up. You need the model number
of the DVR and your email address to access the eClub Web site.
QUESTIONS ABOUT CONTROLLING
A
LIVE PROGRAM
OR
RECORDING
Q. Can I remove the DVR on-screen graphics and banners?
A. Yes. Some TV programs display “scrolling” information across the bottom of the
TV screen (for example, news and sports “tickers”). The DVR on-screen status
to
bar and other graphics may cover up information scrolling on-screen. Press
remove any on-screen graphic or banner.
Q. How far back can I rewind a program?
A. It depends upon whether the program is a live or a recorded program. You can
rewind all recorded programs to the beginning of the recording. The situation is
different for live programs. If you have watched a live program for less than 1
hour, you can rewind back to the point that you started watching the channel. If
you have watched a live program for longer than 1 hour, you can rewind up to the
last hour that you’ve watched. For details on how the DVR allows you to rewind,
fast-forward, pause, or record live TV, see page 13.
Q. Can I pause, rewind, or fast-forward a program in the PIP screen?
A. No. Keys such as pause, rewind, and fast-forward control only the program
shown in the main TV screen. They also control the small Quarter screen that
appears on DVR screens like the Recorded List screen and the Program Guide.
29
FREQUENTLY ASKED QUESTIONS, CONTINUED
QUESTIONS ABOUT PIP
Q.
A.
If a program is being recorded in the PIP screen and I turn off the PIP
feature, will this stop the recording?
No. The DVR continues to record the program even if you turn off the PIP
feature.
Q. What if my TV doesn’t have the PIP feature?
A. That’s no problem. You can still use the PIP feature because the DVR provides
the PIP feature, not your TV.
QUESTIONS ABOUT RECORDING
AND
PLAYING BACK PROGRAMS
Q. If I’ve been tuned to a program since it started, do I have to rewind to the
beginning to record the entire program?
A. No, if you have been tuned to the program since its beginning, and the program
is one hour or less, just press
from any point in the program to record the
entire program. Recording automatically stops when the program ends.
Q. Can I record the program that is shown in the PIP screen?
A. You can record a program that is shown in the PIP screen, but you must swap
the program to the main screen first. For details, see “Swap the Main Screen
and the PIP Screen” on page 15.
Q. Can I record a pay-per-view event?
A. Yes, if you have been authorized by your service provider. After you purchase
the event and wait for it to begin playing, you can record it just like any other
live program. For details, see “Record a Pay-Per-View Event” on page 17.
Q. Can I schedule a recording of a future pay-per-view event?
A. Yes, if you have been authorized by your service provider. For details, see
“Schedule Future Pay-Per-View Recordings” on page 17.
Q. Can I record video-on-demand (VOD) programs?
A. No.
Q. Can I recover a recording that was erased from the DVR?
A. No. There is no way to recover a recording that has been erased from the
Recorded List screen. You can copy programs to a VCR tape or extend the
length of time a program is saved, though. For details, see “Copy Recordings
From Your DVR to a VCR Tape” on page 23 or “Change the Save Time of a
Single Recording” on page 21.
Q. Can I use PIP while copying a program to my VCR?
A. When copying a program to a VCR, the PIP screen displays what is being
copied to the VCR. You cannot use PIP to watch another program while copying
a program to a VCR, but you can change channels in the main screen.
Q. Can I record two programs at the same time and watch a live program on
another channel?
A. No. If, while recording two programs, you try to tune to another channel, the
DVR displays a Channel Change Notice to let you know that you must stop a
recording to change channels. You can watch either of the two channels you are
recording, or you can play back a recording and watch it. For details, see
“Cancel a Recording That Is in Progress” on page 19.
30
FREQUENTLY ASKED QUESTIONS, CONTINUED
Q. Can I erase part of a recording?
A. No. The DVR erases the entire recording.
Q. What happens if a sports event that I scheduled to record goes into overtime?
A. The DVR cannot determine whether a live program will end at its scheduled
time. If there is a chance that the event you are recording may continue past its
scheduled time, you can allow for this uncertainty by extending the stop time on
the Confirm Recording screen.
Q. Do my Parental Controls in the Program Guide carry over to DVR recordings?
A. Yes. If you block programs by channel or rating in the General Settings menu,
recordings of these programs also are blocked. They will be recorded, but to play
them back, you must enter your 4-digit PIN. For details, see “Watch Blocked
Recordings” on page 9.
Q. Do my Parental Controls on my multi-room DVR carry over to multi-room
clients?
A. No. Regardless of what blocking is set on the server (multi-room DVR), each
client blocks content according to its own Parental Control settings.
Q.
A.
Q.
A.
A program I recorded on the DVR displays “Blocked Title” instead of the
actual program title. Why?
The General Setting Block: Titles is set to hidden, and the program was blocked
by Parental Controls. For details, see “Hiding and Viewing Blocked Program
Titles” on page 7.
At the end of the program playback, the DVR started playing the recording
again from the beginning. Why?
To prevent screen burn in, the DVR prevents graphics and a still image from
being displayed for too long. The Playback Status screen displays when a
recording ends. If this screen is shown for 5 minutes, the DVR begins playing the
recording again from the beginning.
Q. When the DVR is turned Off, will the programs that I have scheduled to
record still be recorded?
A. Yes. When the DVR is powered Off (but is still plugged into an active outlet), all
scheduled recordings are performed automatically – and your recordings are
protected. To turn off your DVR, simply press
and then
on your remote,
or press Power on the front panel of the DVR. The Power light turns off; but,
because the DVR is still plugged in to an active outlet, your scheduled recordings
still occur.
Q. I watched two 30-minute programs on the same channel, but when I pressed
Record, the DVR recorded only the most recent program. Why didn’t it record
both programs since it buffered both programs?
A. It recorded the most recent program because it was the live program at the time
that you pressed Record. The DVR does buffer all programs on a channel for up to
one hour. However, when you are watching live programming, the DVR assumes
that you want to record a specific program, not a specific channel. For that reason,
the DVR records only the program that is currently being broadcast at the time
that you press Record.
For example, let’s say that you tune to a channel for 45 minutes and during that
time watch a 30-minute “Friends” episode, and then you watch the first 15 minutes
of “Seinfeld.” You can rewind to the beginning of “Friends,” but if you press Record,
the DVR records only “Seinfeld.” The DVR records only “Seinfeld” because
“Seinfeld” is the live program at the time you pressed Record.
31
FREQUENTLY ASKED QUESTIONS, CONTINUED
Q. Why did the DVR record only part of a program?
A. If the beginning of the program is missing, you may have tuned to the program
and pressed
after it began.
If the end of the program is missing, the DVR may have reached its storage
capacity, the program may have continued past its scheduled time, or you may
have manually stopped the recording.
If there is a chance that the program you are recording may continue past its
scheduled time, you can allow for this uncertainty by extending the stop time on
the Confirm Recording screen.
To determine why the entire program was not recorded, display the Recorded
List screen and select the program in question. The Information area in the
upper left of the Recorded List screen indicates one of the following reasons:
• User stopped recording early.
• Reached storage capacity.
If the DVR has reached its storage capacity, you must make space to record
other programs. To make more space on the DVR:
1. Erase recordings that you no longer want, or copy recordings you want to keep to
a VCR tape and then erase them from the DVR. For details, see “Erase
Recordings” on page 22 or “Copy Recordings From Your DVR to a VCR Tape” on
page 23.
2. Turn Auto Erase On. Your oldest recordings are erased automatically if space is
needed. For details, see “Automatically Erase Oldest Recordings” on page 22.
Q. I tried to copy a DVR recording to a VCR tape, but nothing recorded. Why?
A. Some DVR recordings, particularly pay-per-view events, cannot be archived to
VCR tape, due to copy protection settings within the program content.
If you copy a DVR recording to a VCR tape, do not delete the DVR recording
until you verify that you can successfully playback the recording on the VCR
tape. You have to playback the recording on the VCR tape to verify that the
archiving process was successful.
QUESTIONS ABOUT
THE
MULTI-ROOM DVR CLIENT SET-TOP
Q. Can a Multi-Room DVR client set-top record a program?
A. No. Programs must be set up to record on the Multi-Room DVR server.
Q.
A.
Q.
A.
Can I erase a recording on the Multi-Room DVR server if someone is
currently watching it on one of the client set-tops?
Yes. However, a warning/confirmation message will be displayed on the TV
connected to the Multi-Room DVR server stating that someone is watching the
recording on another TV. The message will state “....are you sure you want to
erase it?” If your answer is yes, press A to confirm that you do want to erase it.
Why can’t the Multi-Room DVR client set-top play recordings whose titles
are gray in the Recorded List?
The recording may be a high-definition program or someone may have erased the
recording on the Multi-Room DVR server. You can find out if the recording has
been erased by closing the Recorded List and then displaying it again. If the
recording is not listed when you display the Recorded List for the second time, then
it has been erased. If the recording is still listed in gray, the recording was made
from a high-definition program and can only be played back on the 8300HD MultiRoom DVR server set-top.
Note: As a future enhancement, the Explorer 3250HD client set-top will be
able to playback HD recordings.
32
FREQUENTLY ASKED QUESTIONS, CONTINUED
QUESTIONS ABOUT HDTV PROGRAMS
Q. Are local TV stations broadcasting in HDTV?
A. Many local TV stations and other programmers are transmitting digital signals.
However, transmitting a digital signal does not mean transmitting an HDTV
signal. Most stations, however, once they begin broadcasting in digital are
offering HD programs from their parent station, such as CBS, ABC, NBC, Fox,
WB, UPN, or PBS.
Q. How can I find out which programs are broadcast in HD?
A. To find out which programs are broadcast in HD, log on to the Web site of your
service provider. Many service providers list their channel lineups on their Web
sites and indicate the channels that are broadcast in HD.
Q. Why are some HDTVs 4:3 Aspect Ratio and Others 16:9?
A. The aspect ratios differ because television manufacturers build both standardscreen and wide-screen HDTVs to appeal to consumer viewing preferences. The
two aspect ratios are as follows:
• On wide-screen (16:9) HDTVs, the programming is displayed on the full screen.
• On standard-screen (4:3) HDTVs, the programming is displayed in letterbox
format in the middle of the screen. (There are bars surrounding the picture.)
Q. What are the differences between standard TVs and HDTVs?
A. • HDTVs can be 1/3 wider than traditional TVs, although some HDTVs have a
traditional (4:3 aspect ratio).
• HDTV uses a much finer resolution to create the TV picture—1125 lines for
HDTV as compared to 525 lines used in standard TV (SDTV). This means that
the resolution for HDTVs can be up to 1920 x 1080 pixels as compared with
720 x 480 for SDTVs.
• In the United States, HDTV is always broadcast with digital signals. SDTV is
currently broadcast in both digital and analog. (However, HDTV and digital
SDTV do not use the same digital signal.)
• Generally, all HDTV-ready monitors or integrated HDTV sets are capable of
supporting an SDTV 480i or 480p signal. Not all HDTV monitors support both
720p and 1080i HDTV signals. For instance, some plasma displays support
only 720p.
Q. I have a wide-screen HDTV and am tuned to a channel that is listed as an
HD channel, but the picture is not displayed in a wide-screen format. What’s
wrong?
A. The program may not be an HD program. Not all stations broadcast HD programs.
Because non-HD programs do not use a wide format, the picture does not fill the
width of the screen. To fill the space, the DVR automatically places bars on the
sides of non-HD programs. You can change this display to one that removes the
bars and fills the screen with the picture.
Q. I’m concerned about burn in. Can I remove the bars that display when
watching certain programs on my HDTV?
A. Yes. You can remove the bars and enlarge or stretch the picture to fill the screen.
If you have a standard-screen HDTV, you might try removing the bars by
displaying the program in a different picture format.
Burn in or “ghosting” occurs when an image is displayed on a TV for an extended
period of time. Through time, the image becomes permanently burned into the
screen, leaving a faint image of it on the screen. Some kinds of HDTVs are more
susceptible to burn in than others. For other ways to reduce burn in, refer to the
user’s guide that came with your HDTV.
33
GET MORE INFORMATION
OR
ASSISTANCE
This guide is designed to help you become familiar with the tasks you use most
often when controlling live programs or recordings, recording programs, playing
recordings, and displaying the PIP. It does not provide comprehensive information
about the DVR. For example, you won’t find instructions on how to install the DVR in
this guide.
If you haven’t found the answer to a question you have, you can make use of the
following resources.
ONLINE DOCUMENTATION
OR THE
EXPLORER ECLUB
If you have questions after looking through the “Find Answers to Frequently Asked
Questions” section of this guide, check the Scientific Atlanta Web site at
www.scientificatlanta.com. It contains online customer support on a number of
topics, including installation and setup. You’ll also find the latest information about
the DVR there, including updates to frequently asked questions.
For additional information about your DVR, Scientific Atlanta invites you to join the
Explorer eClub. This online club provides news and information about the DVR.
Access the Explorer eClub on the Internet at the following Web address:
www.scientificatlanta.com/explorerclub
To join and access the Explorer eClub, you need to enter the model number of your
DVR and your email address.
CUSTOMER SUPPORT
If you have questions after looking through the “Frequently Asked Questions”
section of this guide and the Explorer eClub, contact your service provider.
INFORMATION TO PROVIDE WHEN CALLING FOR ASSISTANCE
To best answer your question, your service provider may ask you for the following
information:
•
Product name and number: To find the model name and number, look on the
front of the DVR. The model name (Explorer) and model number (for example,
8300) are printed there.
Write your model name and number here:
•
Serial number: To find this number, look on the back of the DVR for a label that
is similar to the example shown below.
FIND THE DVR SERIAL NUMBER
To find the serial number, look on the back of the DVR for a label that is similar to the
following example. The serial number begins with SA and is located in the lower left
corner of the bar code.
0003B4287797
Sample Serial Number
SABDQXTL
N0006246618
CAUTION:
Avoid damage to the product!
Your DVR contains a sophisticated hard disk drive that is designed to record
and stream digital video. You must not mishandle this DVR product. Handle this
product with the same level of care you would use when handling other
electronics containing a hard disk drive, such as computers.
Always wait at least 10 seconds after powering down the DVR for the hard
drive heads to spin down (stop) before moving or handling the DVR.
34
NOTES
35
INDEX
B
Displaying, continued
Blocked program titles
Recorded List screen
7
Blocking programs, methods of
Blocking recordings
Scheduled Recordings screen
7, 27
10, 11
Buffer, explanation of
E
13
Erasing
Buttons. See Remote control keys
portions of a recording
C
3
2
recordings in progress
scheduled recordings
recovering
30
34
inside of back cover
Extend recording time 21
External devices, connecting
19
2
19
Changing
F
channel of PIP screen
15
number of days to save recording
Channel banner, displaying
21
FAQs 29
Fast-forwarding
15
live programs
Channel buffer, See Buffer
Channel Change Notice screen
17
Channels
9
13
PIP screen
29
recordings
13
speeds
favorite
13
Favorite channels
selecting to be blocked
Closed lock symbol
7
9
Finding Programs. See Program Guide
7, 9, 28
Formats, picture
Confirm Recording screen
16
5
Frame by frame viewing
Connecting
14
Future programs
1
changing default save time
External devices to DVR
2
Copying recordings to VCR tape
Current recordings, finding
Customer Support
recording
23, 32
21
12, 16
selecting from Program Guide
12
18
34
G
General Settings menu
D
Date, search programs
adjusting HD picture
11
audio output
Default Save Time setting
changing for future recordings
explanation of
21
recording with
21
single recording
list of recordings
21
HDMI Interface
11
display
18
7
18
5-6
storage of programs
20
Hiding titles of blocked programs
7
High-definition programs. See HDTV
15
programs to block
1, 2
HDTV
15
Parental Control setting
Program Guide
9
H
list of scheduled recordings
PIP screen
favorite channels
7
Guide screen. See Explorer screens
Browse By options
channel banner
5-6
2
blocking programs
21
Displaying
36
22, 30, 31
Explorer screens
Canceling
31
recordings
Explorer eClub, about
Camcorder, connecting
DVR
18
9, 27
Browse By feature
Cable mode
18
10
7
INDEX
I
Parental Control feature, continued
Information area on Explorer screens,
inside of back cover
Installation, instructions for
Instant replay
29
turning on and off
watching blocked recordings
9
Pausing
14
live programs
K
Keys, nonresponsive
8
29
13
PIP screen
29
recordings
13
Pay-per-view events, recording
See also individual key names;
17, 30
Picture-in-Picture feature. See PIP feature; PIP screen
inside of front cover
Picture
adjusting display
L
List of recordings, displaying
Live TV, controlling
6
changing darkness of bars in
18
setting format of
13-14
5, 6
PIN Entry screen
Lock symbols
Closed Lock
PIN, create
7, 9, 28
Open Lock
9, 28
7
PIP feature
7
Loss of power
5
explanation of
29
15
turning on or off
15
TV requirements for
M
30
PIP screen
Main TV screen
PIP screen
changing channel
15
Quarter screen
stretching
displaying
10
fast-forwarding in
4
swapping with PIP screen
zooming
15
4
19
15
moving location
15
rewinding
controlling viewing
29
recordings and
MR-DVR system
27
29
main TV screen
pausing
Manual recordings
15
15
15
29
swapping with main TV screen
parental controls, clients and
28
15
Playback Status screen, exiting from
18
Playing
O
and recording simultaneously
Online information, Explorer eClub
Open lock symbol
7
34
blocked recordings
recordings
Overtime in sporting events and
other programs, recording of 31
Power loss
16, 17, 30
9
18
29
Powering off DVR
26
Program Guide
P
Browse By feature
Padlock symbol. See Lock symbols
displaying
Parental Control feature
finding programs
blocking programs
7
10, 11
10
10-11
screen. See Explorer screens
blocking recordings
9
searching for programs
hiding blocked titles
7
selecting a program
how to use
7
12
selecting future programs from
playing blocked recordings
on DVR clients
10-11
27, 28
9
Program rating categories
rewinding
12
8
13
selecting to be blocked
7
37
INDEX
Programs
Recording, continued
blocking with Parental Control
fast-forwarding
finding
scheduled
7
stopped
10-11
live control
pausing
ratings
16-17, 19
video-on-demand
7
watching
Q
30
9, 18
watching TV
17
while watching
10
16, 17, 30
with the default Save Time setting
Quick Settings
adjusting picture format
6
Recovering erased recording
7-8, 27
diagram
30
inside of front cover
placing in cable mode
R
3
preparing to use with TV and DVR
8
18
# key
Recording
A
all episodes of a program
16
blocked programs or channels
9, 27
canceling
19
16
copying to VCR tape
displaying list of
episodes
erasing
23, 32
13
30
18
Info
Last
17, 30
playing when blocked
17, 30
30
13
31
17, 18
Live
14, 18
Mute
14
18
List
Menu
inside of front cover
15
14
inside of front cover
inside of front cover
non-responsive keys
numeric keys
21
13
10-12
Instant Replay
9, 28
programs that continue past scheduled times
Save Time setting
inside of front cover
inside of front cover
Guide
19
playing simultaneously
recovering erased
18
Favorites (FAV)
20-21
18
16, 21
inside of front cover
inside of front cover
Instant Replay
pay-per-view events
saving
inside of front cover
Fast-forward
12, 17, 21
in progress, canceling
rewinding
C
Exit
impact on storage space
13
inside of front cover
DVD
18
future programs
pausing
inside of front cover
B
Day +/-
from the PIP screen
19
inside of front cover
Channel Up
22, 30
manual
inside of front cover
arrows
Channel Down
16
finding current
inside of front cover
All keys
Cable (CBL)
18
fast-forwarding
playing
9, 31
inside of front cover
AUX
changing channels
3
Remote control keys
Recorded List screen, displaying
blocking
21
Remote control device
inside of back cover
Ratings, TV programs
21
without the default Save Time setting
parental control on and off
Quick Tips
17
two programs at once and watching
a live program 17, 30
8
removing blocking from
38
16
two programs at once
13
Quarter screen
16
32
turning off TV
13
recording
18
single programs
13
Page Down
Page Up
29
inside of front cover
inside of front cover
inside of front cover
INDEX
Remote control keys, continued
Pause
13
PIP keys
Play
Troubleshooting. See also FAQs
15
loss of power
13-14
Power
2, 5-7, 9, 27-28
18, 19
25
Turn off DVR
26
TV connections and DVR
inside of front cover
VCR
SATA drive
Volume Up
stretching
inside of front cover
Volume Down
Rewinding
zooming
inside of front cover
inside of front cover
Record (REC)
32
1
TV picture
inside of front cover
Video Source
12, 16-17
4
4
swap with PIP
TV ratings
15
8
V
13
VCR connections and DVR
2, 23
VCR tape, copying recordings to
S
Ventilation
SATA drive
2, 24
recording programs to
troubleshooting
Video-on-demand
24
2
30
Video source, switching
25
23, 32
26
Video games, connecting
connecting to DVR
29
30
program partially recorded
inside of front cover
Settings
Stop
pay-per-view events
13
Select
29
non-responsive remote control keys
inside of front cover
Rewind
TV
T
2
Viewing titles of blocked programs
7
Safety iii
Save Latest options
16
W
Save Time setting, changing
Saving recordings
methods of
21
Watching recordings
21
20
permanently. See Copying recordings to VCR tape
storage space
9, 18
Web access to more information, Explorer eClub
Wizard, Setup
34
3-4
20
Scheduled recordings
canceling
19
displaying list of
screen
18
18
Screen explanation
inside of back cover
Search programs. See Program Guide
Serial ATA. See SATA drive
Serial number, locating
Setup Wizard
3-4
Simultaneous recording
Slow motion
34
17, 30
14
Speed indicator on Status Bar
Status Bar
Storage space
Support
13
13
20-21
34
Swap PIP and main TV screens
15
39
NOTES
40
QUICK TIPS
Press to display the last channel you were last watching.
While in normal Play mode, press once while watching live TV or a recording to see the program in
slow motion. Press a second time to resume normal play.
Press to remove any Explorer screens or banners and display full-screen TV.
Press to display the Information banner. This banner provides information about the channel you
are watching. It can also help you confirm that you are recording a particular channel. When a
channel is being recorded, the Recording Now
symbol appears in the banner.
If watching a buffered program (delayed TV), press to catch up with the live TV broadcast.
If playing back a recording, press to return to the last live TV channel you were tuned to.
Press to replay the last 8 seconds of a live or recorded program. Each additional press jumps back
8 more seconds.
For HDTVs, press to remove the letterbox or pillarbox bars. Press once to stretch the display and
remove the bars. Press a second time to enlarge (zoom) the display and remove bars. Press a third
time to return the display to the normal setting (letterbox or pillarbox).
then
Press Pause then Fast Forward to step through single frames going forward.
then
Press Pause then Rewind to step through single frames in reverse.
EXPLORER SCREENS
This illustration explains the format of a typical Explorer screen, showing where to look
for key information and how selections are presented. Although each screen contains
information and options that are specific to a particular task, most of the screens are
very similar to the example screen shown here.
The Information area
displays information about
the program you have
selected from this screen
or about the program
you are tuned to.
Recorded List
"The Jungle Book"
USA (Ch 67)
Record: 1 Episode
Save: 1 Day
Recorded Programs
PGA Golf Press
The Selection area
displays items you can
select. Here, for
example, are recorded
programs that you can
select.
The Jungleor
Book
press
Dr. Phil
Options/Play
Date
Time
to record
program
Sun this
6/15
2:30pm
Length
1hr 30min
Wed
7:00pm
for
more6/18
recording
options. 2hr 0min
Fri
6/13
3:10pm
Scheduled Recordings
50min
Preferences
The bar at the bottom of each screen displays
selections that you can make from the screen.
The Quarter
screen shows
the program of
the channel you
are currently tuned
to or the recorded
program you are
watching.
With the Explorer DVR
you can record your favorite programs
and then play back your recordings
whenever you want.
The built-in digital video recorder and
Picture-in-Picture feature give you
complete control,
convenience,
and
choice
when watching TV.
Use this guide for the following Explorer models:
8000, 8000HD, 8240, 8240HD, 8300, 8300HD, 8300HDC, 8300 Multi-Room, 8300HD Multi-Room
3250HD, 8000, 8010HD, 8240, 8240HD, 8300, 8300HD, 8300HDC, AT8550, and Multi-Room are
trademarks of Scientific-Atlanta, Inc.
Scientific Atlanta, the Scientific Atlanta logo, AllTouch, and Explorer are registered trademarks of
Scientific-Atlanta, Inc.
Cisco, Cisco Systems, and the Cisco trademark are registered trademarks of Cisco Systems, Inc.
and/or its affiliates in the U.S. and certain other countries.
Dolby is a registered trademark of Dolby Laboratories.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
All other trademarks shown are trademarks of their respective owners.
Product and service availability subject to change without notice.
Scientific Atlanta, A Cisco Company 5030 Sugarloaf Parkway, Box 465447, Lawrenceville, GA 30042
www.scientificatlanta.com
© 2006 by Scientific-Atlanta, Inc. All rights reserved.
October 2006 Printed in United States of America
4003870 Rev D