Siemens RDF301.50 Datasheet

System Catalog 2014
The information in this document contains general descriptions of technical options available,
which do not always have to be present in individual cases. The required features should therefore
be specified in each individual case at the time of closing the contract.
© Siemens Switzerland Ltd, 2013
Answers for infrastructure and cities.
Our world is undergoing changes that force us to think
in new ways: demographic change, urbanization, global
warming and resource shortages. Maximum efficiency
has top priority – and not only where energy is concerned.
In addition, we need to increase comfort for the well-being
of users. Also, our need for safety and security is constantly
growing. For our customers, success is defined by how
well they manage these challenges. Siemens has the
answers.
www.siemens.com/buildingautomation
“We are the trusted technology partner for
energy-efficient, safe and secure buildings and
infrastructure.”
Building automation
and control systems
Siemens Switzerland Ltd
Infrastructure & Cities Sector
Building Technologies Division
International Headquarters
Gubelstrasse 22
6301 Zug
Switzerland
Tel +41 41 724 24 24
Building automation
and control systems
System Catalog 2014
Answers for infrastructure and cities.
Content
1
System functions
–
–
–
–
–
–
–
–
–
2
Management functions
– Desigo Control Center
– Desigo insight
– Information management
3
Automation controls
– Automationstation
– Operator units
– I/O modules
Room automation
–
–
–
–
Desigo TRA
Desigo RX
Room operation units
Service unit
Standard controllers
–
–
–
–
–
Synco700
Extension modules
Operator units
Software
Central communication units
Room automation Synco
–
–
–
–
–
–
–
Desigo RXL
Desigo RXB
Communicating room thermostats
Central control unit
Room operation units
Damper actuator (KNX)
KNX accessories
4
5
6
Desigo – energy-efficient and flexible building automationsystem
Desigo system topology
System functions
Trend and history function
Alarm management
Schedulers/calendar
Access rights
Monitoring functions
Communication – networks
Can old buildings be just as
energy-efficient as new ones?
Intelligent and energy-efficient building technologies from
Siemens reduce emissions and costs, in any building.
Higher energy efficiency and
enhanced comfort in rooms
Dear Customers and Partners,
With innovative and environmentally friendly technologies, Siemens Ltd has been
promoting environmental protection and the efficient use of energy in buildings and
rooms for years. Many satisfied customers from around the world who have a wide
range of needs demonstrate that this approach does not fall short of user-friendliness
and comfort.
The successful establishment of Desigo™ Total Room Automation (TRA) in recent
months has set new standards on the market when it comes to room automation
and the energy-efficient control of all disciplines in the room. Flexibility where user
and building requirements are concerned as well as the smooth interaction between
HVAC, lighting and shading have already won over many customers.
Support for the most recent and future industry and IT standards has been significantly
improved in the latest Desigo system update. Desigo remains compatible with the
BACnet standard and provides support for BACnet IPv6. As another new feature, Desigo
now also meets the AMEV guideline, which is becoming more and more important,
particularly in German-speaking countries. This means that your investment in the
future is secure even today.
Desigo Touch and Web is the new product generation for easy and innovative operation of HVAC systems. An intuitive user interface on high-end touch panels or mobile
operator units and a Web server allow users to control and operate one or multiple
systems. The new room operator units and sensors will win you over with their new
design, combined with innovative energy efficiency functions.
The new building management station Desigo CC is the next major innovation ready
for launch. Desigo CC permits the ergonomic operation and evaluation of all building
requirements for HVAC, lighting, security and fire safety.
As a Solution Partner, you continue to have access to the latest versions of our
documentation and communication materials as well as our innovative tools for
calculating energy efficiency and preparing bids.
You will benefit from our extensive and reliable range of systems and products
developed for maximum energy efficiency, user-friendliness and comfort.
3
BACS efficiency classes – EN 15232
High energy performance
BACS and TBM
A
Advanced
BACS and TBM
B
Standard
BACS
C
Non-energy-efficient
BACS
D
BACS
TBM
Building Automation and Control System
Technical Building Management System
Cutting costs through
energy efficiency
The best way to lower operating
costs is to consume less energy.
Intelligent building automation
technology from Siemens helps
reduce the energy use by as
much as 30 percent.
Achieving energy efficiency without
sacrificing comfort
Rising energy costs and government
regulations are not the only reasons
why people are rethinking their energy
consumption. Growing awareness of
climate change and dwindling resources
are other factors why energy efficiency
is becoming more and more important
in everyday life.
Buildings account for roughly 40 percent
of global energy consumption. Examples
include residential buildings, office and
commercial buildings as well as hotels,
shopping centers and industrial buildings.
4
Lowering energy consumption using intelligent building automation is particularly
effective. Improvements to existing building automation systems often require little
investments and help save a significant
amount of energy, reduce CO2 emissions
and shorten payback periods.
The building automation systems from
Siemens make it possible to reach efficiency
class A under the European Standard
EN 15232. As a leading specialist in energy
efficiency in buildings, with more than
30 years of experience and an extensive
and harmonized portfolio of products,
systems and solutions, Siemens is the
ideal partner for optimizing efficiency.
Energy-efficient applications
Measurable and sustainable energy
savings can be achieved only through
control strategies developed on the basis
of proven applications. Systems from
Siemens are based on an extensive set
of innovative functions.
For example, the Desigo AirOptiControl
application not only ensures good air
quality and optimum room temperature
but also reduces the required energy
demand by as much as 50 percent.
Focus on the room user
With its room automation technology,
Siemens not only provides intelligent
control but also involves the room users.
Actively inviting the participation of users
makes it possible to save even more energy.
With the Desigo Green Leaf display, users
can check at any time whether energy
consumption has exceeded the limit
values. At the press of a button, users
can return the system to optimized operation at any time, thereby contributing
to energy efficiency.
Highlights
■■
eduction in energy
R
consumption by as much
as 30 percent
■■
ustainable, efficient
S
control strategies based on
established applications
■■
dditional cost savings by
A
involving room users
5
Desigo – flexible
and energy-efficient
Efficient savings without sacrifices –
with the Desigo building automation system, you can save a great
deal of energy while maintaining
a pleasant room climate and
optimizing comfort.
6
Desigo helps lower operating costs and
cut energy consumption while maintaining optimum room conditions. You can
respond quickly and flexibly to changes
in building usage, and your investments
are protected over the building’s entire
life cycle, thanks to features such as centralized, intelligent energy management,
highly efficient energy saving functions,
and the effective interaction of all system
components and processes.
Innovative system operation
The new Desigo Touch and Web, whose
innovative operating concept makes it
easy and intuitive to operate, simplifies
the operation and monitoring of HVAC
systems. A touch panel mounted on the
control cabinet door allows you to access
multiple systems at the same time. You
can use the Web browser to control and
operate systems from a laptop, tablet or
smart phone – anytime and anywhere.
The user interface has been standardized
on all devices.
Energy-efficient room automation
Desigo TRA provides a perfectly coordinated overall solution for the HVAC,
lighting and shading disciplines in a
room. Intelligent room control ensures
energy-optimized operation.
Desigo TRA’s freely programmable room
automation stations are seamlessly connected to the primary system via BACnet/IP.
DALI and KNX devices can be fully integrated and interact with existing and new
sensors and actuators from Siemens.
New features
Desigo provides support for the latest and
future industry and IT standards, including
AMEV, BACnet with IPv6 communication
and the B-AWS profile for Desigo Insight as
well as the latest 64-bit Windows operating
systems. A new, comprehensive range of
room sensors and room operator units for
surface and flush mounting as well as
enhanced KNX integration strengthen
the range of room devices. Additional
improvements were made to the Desigo
applications and tools.
Highlights
■■
educes operating costs
R
and maximizes investment
protection without sacrificing
comfort
■■
I ntuitive system operation,
thanks to new touch panels
and Web access
■■
upports the latest standards
S
for seamless integration
■■
xtensive range of new
E
KNX room units
7
Desigo CC
management station
Desigo CC, the new management
station from Siemens, allows you
to monitor and operate multiple
disciplines in modern building
systems efficiently and according
to workflow.
8
All building disciplines, including building
automation as well as fire safety and security, can be integrated into the Desigo CC
building management station and linked
to each other intelligently. Desigo CC is
a flexible management station based on
proven technologies with extensive support
for communications standards such as
BACnet, OPC and Modbus. In addition, the
management station is certified under
the BACnet B-AWS profile. The adaptive
architecture and operation guarantee a
high degree of scalability and maximum
investment protection.
The process-oriented operating concept
supports fast, intuitive and standardized
control of systems as well as the ability to
handle management tasks from different
areas. A consistent menu guidance system
minimizes training and permits flexible
modifications in the event that changes
are made to the building.
The user interface can be customized to
personal preferences. The most important
information is displayed first. Windows do
not overlap, and all disciplines appear
in the same window. Users benefit from
an easy-to-understand visualization of
all disciplines, and they save time since
there is no need to switch applications.
Desigo CC uses vector graphics for an
attractive, high-resolution display of
system elements, including full zoom
functions. System graphics can be
displayed in either 2D or 3D.
Highlights
■■
ll disciplines are integrated
A
into a single management
station
■■
rocess-oriented operating
P
concept optimizes system
operation
■■
an be flexibly adapted to
C
the customer’s needs and
growing requirements
9
Synco 700 – communicating HVAC control
Synco 700 supports the entire
life cycle of small to medium-size
buildings. The controllers can be
extended and adapted at any time,
thanks to their modular design and
backward compatible communication. This way, investments can
also be made in steps.
10
Being the heart of the building automation and control system, Synco 700 is
responsible for the generation of heat
and refrigeration, controls and monitors
plants, and communicates via KNX.
Installation and commissioning are fast
and efficient, thanks to integrated and
proven standard applications, and there
is no need for programming. Naturally,
individual configurations can also be
made easily, if required. The system can
be extended at any time since extension
modules can be attached to the controllers
simply by clicking. With Synco, you save
time and costs when it comes to planning,
engineering and commissioning.
The preprogrammed energy saving functions ensure energy-optimized operation.
Also, the Synco controllers exchange
energy-related information via KNX, so
that aggregates such as heating boilers,
chillers or pumps are switched on only
if required to maintain the desired comfort level. This way, Synco provides the
preconditions to attain efficiency class A.
Monitored energy efficiency
Room users and facility managers can
considerably influence energy consumption by switching the plant off during
non-occupancy times or by matching the
room temperature and the time schedule
to the current occupancy times.
Whatever the settings, an energy indicator
shows the room’s energy efficiency state:
Green means that the settings made are
correct from the point of view of energy
usage, orange indicates unfavorable
settings. This way, deviations are always
visible.
The communicating room controllers RXB
and RXL as well as the communicating
room thermostats RDG and RDF enable
the users to straightforwardly adjust the
comfort temperature in the individual
rooms. This saves additional energy.
Using the Web or the HomeControl app,
room users can check their settings
from any location at any time via PC
or smart phone.
Furthermore, the Synco system supports
the user with intelligent functions, such
as the energy indicator, which monitors
end-user settings, shows non-adherence
to limit values and forwards them periodically to the users via e-mail or app.
For more detailed information, please
visit www.siemens.com/synco
Highlights
■■
fficient installation thanks to
E
extremely versatile, modular
range of HVAC controllers
■■
nergy efficiency thanks to
E
energy saving functions and
exchange of energy-related
data
■■
nhanced comfort due to
E
individual room climate
■■
igher energy efficiency
H
thanks to memory function
and reporting of unfavorable
conditions from the point of
view of energy usage
11
eu.bac
system certification
Siemens planner tools
Energy Performance
Classification Tool
Preliminary study
Energy Efficiency
Calculation Tool
Project planning
HVAC
Integrated Tool
Specification
Text Selection Tool
Bidding phase
Project
implementation
Operation and
modernization
Supporting tools for
the sales process
Siemens offers extensive supporting
tools for the entire planning and
implementation process.
12
The European Standard EN 15232 distinguishes between four efficiency classes
from A to D and defines the energy saving
potential for different types of buildings
resulting from building automation and
control. To check adherence to the classification, the European Building Association
(eu.bac) introduced a certification of
systems which verifies the functions
specified by the standard.
Siemens was the leading company when
EN 15232 was developed and is still
involved in the standard’s maintenance,
including certification by eu.bac. Based
on this concept, Siemens developed software tools and other means for planning
and specifying building automation and
control systems. The tools Energy Performance Classification (EPC), Energy Efficiency Calculation (EEC), and the Specification Text Selection Tool (STST) support
planning of building automation and
control systems during the entire life cycle
of a building (new project, extensions,
modernization).
Overview of tools:
Preparation of a project
For initial customer contacts and preparatory steps, sophisticated tools and other means, such as brochures,
technical documentation, guides and training courses, are available.
Energy Performance Classification (EPC)
The EPC Tool allows for a quick analysis of the existing building automation
and control functions to assess the energy saving potential and the resulting
payback time. The calculations are based on the building automation and
control efficiency classes according to EN 15232:2012.
Energy Efficiency Calculation (EEC)
The EEC Tool offers an in-depth analysis of the building automation and
control functions and a reliable assessment of energy savings and the
payback time. The calculation is made dynamically based on customerspecific buildings. The impact of control functions is also calculated.
Specification Text Selection Tool (STST)
STST saves time when preparing functional bids. The comprehensive text
database contains product-independent texts to completely describe an
entire building automation system. The tool also comes with texts that
describe the system requirements on the management, automation, room
and field level. In addition, it supports individual descriptions of all applications for primary systems, room functions and control panels.
Tendering phase
The tools used for the classical tendering phase are the HVAC Integrated Tool (HIT) and the Desigo Configuration
Module (DCM). HIT facilitates the simple selection of field devices while, among other things, DCM allows for the
creation of extensive parts lists, which can also be used in the ensuing engineering process.
13
The Siemens Solution
Partner program
The Siemens Solution Partner
program offers partners added
value for all phases of a project.
When talking to decision makers, considerable effort is required to persuade them
of the values of your company. Siemens
supports you when creating new business
relations and when making efforts to stay
at the top. Siemens cultivates long-term
relationships with strong partners throughout the world. Working with Siemens offers
you many competitive advantages and
extensive support when dealing with
specific customer requirements. Successrelated documentation and tools are
available via the Solution Partner extranet,
24 hours a day.
The Siemens Solution Partner program
is based on five main pillars:
– Products and systems
– Training
– Sales support
– Marketing support
– Technical support
For more information,
as well as our tools, please visit
www.siemens.com/bt/solution-partner
14
Overview of our products,
systems and services:
Acquisition
Akquise
Planung
Design
Implementierung
tation
Wartung
Services
und Service
Produkte
und systems
Systeme
Products and
Die
Produktebasis,
kombiniert
mit leistungsstarken
The solide
comprehensive
portfolio
of products
and systems,
Programmierungs-Tools,
Bibliotheken tools,
und Modulen
together with powerful programming
libraries and
erlauben
überzeugende
Lösungen
für Ihre
Kunden
modules, es,
enables
you to develop
convincing
solutions
zu
for erstellen.
your customers.
Training
Siemens offers
stellt ein
a large
umfangreiches
number of Trainingsangebot
training courses including
samt
entsprechendem
the
accompanyingMaterial
material.
zur Verfügung.
Sales support
Vertriebssupport
Imnumber
A
Extranetofstehen
calculation
zahlreiche
tools and
Kalkulationswerkzeuge
extensive documentaund Unterlagen
tion
for a successful
für einen
sales erfolgreichen
process are made
Verkaufsprozess
available via
zur Verfügung.
the
extranet. These
Diesesupport
unterstützen
you when
Sie bei
submitting
der Angebotsoffers
erstellung
or
when there
sowie
is abei
need
der to
Datenauslegung.
interprete data.
Marketing support
Marketingunterstützung
Ein spezielles
Solution
Partners
Partnerlogo
are identified
identifiziert
by a special
Solution
partner
Partner.
logo.
Regionaler
Regional
marketing
Marketingsupport,
support and
sowie
a number
verschiedene
of marketing
Marketingmaterialien
tools
are available.
stehen zur Verfügung.
Technical support
Technischer
Support
Neben
In
addition
einem
to umfangreichen
an extensive choice
Repertoire
of supporting
an unterdocustützender Dokumentation
mentation,
Siemens expertsstellt
are available
Siemens to
auch
support you
technisches
should
you encounter
Personal zur
a technical
Unterstützung
problem.
im Problemfall.
15
Type Overview
Product Number
Description
7411100280
Terminal covers
Datasheet
Page
ACS790
Commissioning and plant operating software
AP 258E01
Surface-mounting enclosures for UP 258E21 or UP 258D11
4-34
5-44
N5649
5-45
AP 420/13
IR wall switch‚ single‚ titanium white
4-33
AP 421/13
IR wall switch‚ double‚ titanium white
4-33
AP 422/13
IR wall switch‚ quadruple‚ titanium white
AQR2530NNW
Front module for base module‚ without sensor
N1410
4-25
4-33
AQR2531ANW
Front module with passiv temperature measurement‚ LG-Ni1000
N1408
4-38
AQR2532NNW
Front module for base module‚ temperature (active)
N1410
4-25
AQR2533NNW
Front module for base module‚ humidity
N1410
4-25
AQR2535NNW
Front module for base module‚ humidity and temperature (active)
N1410
4-25
AQR2535NNWQ
Front module for base module‚ humidity and temperature‚ with LED
N1410
4-25
AQR2570NF
Base module for temperature and / or humidity measurement‚ with KNX / PL-Link‚ 70.8 N1411
x 70.8
4-24
AQR2570NG
Base module for temperature and / or humidity measurement‚ with KNX / PL-Link‚ 110 N1411
x 64
4-24
AQR2570NH
Base module for temperature and / or humidity measurement‚ with KNX / PL-Link‚ 83 N1411
x 83
4-24
AQR2570NJ
Base module for temperature and / or humidity measurement‚ with KNX / PL-Link‚ 64 N1411
x 110
4-24
AQR2576NF
Base module for CO2 measurement‚ with KNX / PL-Link‚ 70.8 x 70.8 mm
N1411
4-25
AQR2576NG
Base module for CO2 measurement‚ with KNX / PL-Link‚ 110 x 64 mm
N1411
4-25
AQR2576NH
Base module for CO2 measurement‚ with KNX / PL-Link‚ 83 x 83 mm
N1411
4-25
AQR2576NJ
Base module for CO2 measurement‚ with KNX / PL-Link‚ 64 x 110 mm
N1411
4-25
BAU200
Universal digital indicator
N5312
5-40
BSG21.1
Setpoint adjuster‚ passive‚ scale 0...50 °C (exchangeable)
N1991
5-21
BSG21.5
Setpoint adjuster‚ passive‚ temperature ranges: -20...20 °C; 20...60 °C; -3...3 K
N1991
5-38
BSG61
Active setpoint adjuster 0…100 %‚ for flush panel mounting
N1992
5-38
FGT-PT1000
Flue gas temperature sensor Pt1000
N1846
5-21
GDB181.1E/KN
VAV compact controller KNX‚ 24 V‚ 5 Nm‚ 150 s‚ 300 Pa
N3547
4-35
GLB181.1E/3
VAV compact controller‚ 24 V‚ 10 Nm‚ 150 s‚ 300 Pa‚ 0...10 V / 3-position
N3544
4-35
GLB181.1E/KN
VAV compact controller KNX‚ 24 V‚ 10 Nm‚ 150 s‚ 300 Pa
N3547
4-35
OCI700.1
Service tool for KNX / LPB
N5655
5-46
OZW771.04
Central communication unit‚ max. 4 controllers
N3117
5-44
OZW771.10
Central communication unit‚ max. 10 controllers
N3117
5-44
OZW771.64
Central communication unit‚ max. 64 controllers
N3117
5-44
OZW772.01
Web server for 1 KNX device
N5701
5-43
OZW772.04
Web server for 4 KNX devices
N5701
5-43
OZW772.16
Web server for 16 KNX devices
N5701
5-43
N5701
OZW772.250
Web server for 250 KNX devices
PX KNX
PX KNX system controller
3-11
5-43
3-11
PX M-Bus
PX M-bus system controller
PX Modbus
PX Modbus system controller
PXA-C1
Connecting cable RJ45 - RHJ45‚ cable length 3 m
PXA-C2
Adapter RJ45 - RS232 at computer
N9234
3-14
PXA-C4
Adapter from PXM20.. for firmware download
N9234
3-17
3-12
N9234
3-14
PXA-H1
Multifunction cover blade for panel door or wall mount
PXA30-K11
PX KNX S-mode card
N9280
3-17
3-11
PXA30-N
Extension module for BACnet on Ethernet/IP
N9262
3-13
PXA30-RS
Extension module for RS232 and RS485‚ up to 100 data points
N9281
3-12
PXA30-RS1
Extension module for RS232 and RS485‚ up to 400 data points
N9281
3-12
3-12
PXA30-RS2
Extension module for RS232 and RS485‚ up to 2000 data points
N9281
PXA40-T
Option module with remote management via modem for automation stations
N9222
3-8
PXA40-W0
Option module with Web function (generic/graphic) for one automation station
N9222
3-9
PXA40-W1
Option module with Web function (generic) for all automation stations in the BACnet N9222
network
3-9
PXA40-W2
Option module with Web function (generic/graphic) for all automation stations in the N9222
BACnet network
3-9
NEW PRODUCT
Siemens Switzerland Ltd
Building Technologies Division
1
www.siemens.com/buildingtechnologies-productcatalog
2014
Type Overview
Product Number
Description
Datasheet
Page
PXC-NRUD
Adapter plug-in circuit board for INTEGRAL NK modules‚ intgrates 48 data points in
Desigo
N9761
3-15
PXC-NRUF
Automation station for INTEGRAL migration‚ intgrates 64 data points in Desigo
N9760
3-15
PXC00-E.D
System controller BACnet/IP
N9222
3-10
PXC00-U
System controller for the integration
N9221
3-11
PXC00.D
System controller BACnet/LonTalk
N9222
3-10
PXC100-E.D
Automation station BACnet/IP‚ with up to 200 data points
N9222
3-8
PXC100.D
Automation station BACnet/LonTalk‚ with up to 200 data points
N9222
3-8
PXC12-E.D
Automation station with 12 data points and BACnet on IP
N9215
3-5
PXC12.D
Automation station with 12 data points and BACnet on LonTalk
N9215
3-5
PXC200-E.D
Automation station BACnet/IP‚ with more than 200 data points
N9222
3-8
PXC200.D
Automation station BACnet/LonTalk‚ with more than 200 data points
N9222
3-8
PXC22-E.D
Automation station with 22 data points and BACnet on IP
N9215
3-6
PXC22.D
Automation station with 22 data points and BACnet on LonTalk
N9215
3-6
PXC3.E72
Room automation station BACnet / IP‚ with up to 4 rooms / 8 room segments
N9203
4-15
PXC3.E72A
Room automation station BACnet / IP und DALI‚ with up to 4 rooms / 8 room segments N9203
4-15
PXC3.E75
Room automation station BACnet / IP‚ with up to 8 rooms / 16 room segments
N9203
4-15
PXC3.E75A
Room automation station BACnet / IP und DALI‚ with up to 8 rooms / 16 room segments
N9203
4-15
PXC36-E.D
Automation station with 36 data points and BACnet on IP
N9215
3-7
PXC36.D
Automation station with 36 data points and BACnet on LonTalk
N9215
3-6
PXC50-E.D
Automation station BACnet/IP‚ with up to 52 data points
N9222
3-8
PXC50.D
Automation station BACnet/LonTalk‚ with up to 52 data points
N9222
3-8
PXG3.L
BACnet router‚ BACnet Ethernet/IP to BACnet/LonTalk or BACnet/MS/TP
N9270
3-14
PXG3.M
BACnet router‚ BACnet Ethernet/IP to BACnet/MS/TP
N9270
3-14
PXG3.W100
Web interface BACnet/IP for Desigo Touchpanels
N9294
3-18
PXM10
Operator unit‚ local
N9230
3-20
PXM20
Operator unit with BACnet on LonTalk
N9231
3-19
PXM20-E
Operator unit with BACnet on IP
N9234
3-19
PXM40
10.1-inch touch panel
N9292
3-17
PXM50
15.6-inch touch panel
N9293
3-16
PXX-L11
Extension module for up to 60 LonWorks devices / RXC room controllers
N9282
3-9
PXX-L12
Extension module for up to 120 LonWorks devices / RXC room controllers
N9282
3-9
PXX-PBUS
Extension module for Integration of existing PTM I/O modules
N9283
3-9
QAA24
Room temperature sensor LG-Ni1000
N1721
4-38
QAA25
Room unit with room temperature sensor and setpoint adjuster
N1721
5-40
QAA27
Room unit with room temperature sensor and setpoint readjuster -3…3 K
N1721
5-21
QAA64
Room temperature sensor LG-Ni1000 for mounting on recessed conduit boxes
N1722
4-38
5-21
QAC22
Outside sensor LG-Ni1000
N1811
QAC3161
Outside / room temperature sensor DC 0..10V
N1814
5-37
QAC32
Outside sensor NTC 575 Ohm
N1811
5-21
QAD22
Strap-on temperature sensor LG-Ni1000
N1801
5-21
QAD26.220
Strap-on temperature sensor with cable LG-Ni1000
N1802
5-21
QAE2120.010
Immersion temperature sensor 100 mm LG-Ni1000‚ with protection pocket
N1781
5-21
QAE2120.015
Immersion temperature sensor 150 mm‚ LG-Ni1000‚ with protection pocket
N1781
5-37
QAE2121.010
Immersion temperature sensor 100 mm‚ LG-Ni1000‚ without protection pocket
N1781
5-37
QAE2121.015
Immersion temperature sensor 150 mm LG-Ni1000‚ without protection pocket
N1781
5-37
QAE2164.010
Immersion temperature sensor 100 mm DC 0...10 V
N1782
5-37
QAE2164.015
Immersion temperature sensor 150 mm DC 0...10 V
N1782
5-37
QAF63.2
Frost sensor‚ modulating‚ capillary tube 2000 mm
N1821
5-37
QAF63.6
Frost sensor‚ modulating‚ capillary tube 6000 mm
N1821
5-37
QAM2112.040
Duct temperature sensor 400 mm‚ Pt1000
N1761
5-37
QAM2120.040
Duct temperature sensor 400 mm‚ LG-Ni1000
N1761
4-38
QAM2120.200
Duct temperature sensor 2000 mm‚ LG-Ni1000
N1761
5-37
QAM2120.600
Duct temperature sensor 6000 mm‚ LG-Ni1000
N1761
5-37
QAP21.2
Cable temperature sensor for high-temperature applications (180°C)
N1833
5-37
QAP21.3
Cable temperature sensor silicone 1.5 m‚ LG-Ni1000
N1831
5-37
2 NEW PRODUCT
Siemens Switzerland Ltd
Building Technologies Division
www.siemens.com/buildingtechnologies-productcatalog
2014
Type Overview
Product Number
Description
Datasheet
Page
QAP22
Cable temperature sensor PVC 2 m‚ LG-Ni1000
N1831
4-38
QAT22
Window pane temperature sensor
N1830
5-37
QAW740
Room unit with KNX bus
N1633
6-28
QAX30.1
Room unit with sensor and PPS2 interface
N1741
4-53
QAX31.1
Room unit with sensor‚ setpoint adjuster and PPS2 interface
N1741
4-53
QAX32.1
Room unit with sensor‚ setpoint and operating mode selector and PPS2 interface
N1641
4-53
QAX33.1
Room unit with sensor‚ setpoint and operating mode selector‚ fan speed selection‚ and N1642
PPS2 interface
4-54
QAX34.1
Room unit with sensor‚ setpoint and operating mode selector‚ display and PPS2 inter- N1645
face
4-54
QAX34.3
Room unit with sensor‚ setpoint and operating mode selector‚ display and PPS2 inter- N1640
face
4-54
QAX39.1
Universal setpoint adjuster with PPS2 interface
N1646
4-54
QAX50.5/C000
Versatile room unit with LonWorks interface‚ lighting systems (on / off)
N1648
4-59
QAX51.5/C000
Versatile room unit with LonWorks interface‚ lighting systems (dimmed)
N1648
4-59
QAX84.1/PPS2
Flush-mounted room unit complete with PPS2 interface and design frame
N1649
4-55
QAX95.4
Room unit with EnOcean interface
N1663
4-56
QAX96.4
Room unit with EnOcean interface‚ setpoint adjuster
N1663
4-56
QAX97.4
Room unit with EnOcean interface‚ setpoint adjuster‚ button and switch
N1663
4-57
QAX98.4
Room unit with EnOcean interface‚ setpoint adjuster‚ button and switch for fan stages N1663
4-57
QBE64-DP4
Differential pressure sensor for liquids and gases (DC 0…10 V) 0…400 kPa
N1921
5-37
QFA1000
Room hygrostat‚ setpoint setting range 30...90 % r.h.‚ setpoint adjuster inside device N1518
5-39
QFA1001
Room hygrostat‚ setpoint setting range 30...90 % r.h.‚ external setpoint adjustment
N1518
5-39
QFA2000
Room sensor for humidity (DC 0...10 V)
N1857
5-40
QFA2020
Room sensor for humidity (DC 0...10 V) and temperature (LG-Ni1000)
N1857
5-40
QFA2060
Room sensor for humidity (DC 0...10 V) and temperature (DC 0...10 V)
N1857
5-40
QFA3100
Room sensor for humidity (DC 0...10 V) for demanding requirements
N1858
5-40
QFA3160
Room sensor for humidity (DC 0...10 V) and temperature (DC 0...10 V) for demanding N1858
requirements
5-40
QFA4160
Room sensor for humidity (DC 0..10V) and temperature (DC 0..10V) with calibration N1859
certificate
5-40
QFM2100
Duct sensor for humidity (DC 0...10 V)
N1864
5-38
QFM2120
Duct sensor for humidity (0...10 V) and temperature (Ni1000)
N1864
5-38
QFM2160
Duct sensor for humidity (DC 0...10 V) and temperature (DC 0...10 V)
N1864
5-38
QFM3100
Duct sensor for humidity (DC 0...10 V) for demanding requirements
N1882
5-38
QFM3160
Duct sensor for humidity (DC 0...10 V) and temperature (DC 0...10 V) for demanding N1882
requirements
5-38
QFM4160
Duct sensor for humidity (0...10 V) and temperature (0...10 V) with calibration certif- N1883
icate
5-38
QFM81.2
Duct hygrostat‚ setpoint setting range 15...95 % r.h.
5-39
QFM81.21
Room hygrostat‚ setpoint setting range 15...95 % r.h.‚ setpoint adjuster inside device N1514
5-39
QLS60
Solar sensor
N1943
5-21
QMX3.P02
Room operator unit KNX with temperature sensor‚ configurable touchkeys‚ LED display
N1602
4-27
QMX3.P30
Room sensor KNX for temperature
N1602
4-26
QMX3.P34
Room operator unit KNX with temperature sensor‚ segmented backlit display‚
touchkeys
N1602
4-27
QMX3.P36F
Room unit for KNX PL-Link‚ freely configurable‚ flush-mounted with square bezel
N1601
4-24
QMX3.P36G
Room unit for KNX PL-Link‚ freely configurable‚ flush-mounted with landscape bezel
(3 modules landscape)
N1601
4-24
QMX3.P37
Room operator unit KNX with temperature sensor‚ segmented backlit display‚ config- N1602
urable touchkeys‚ LED display
4-28
N1514
QMX3.P70
Room sensor KNX for temperature‚ humidity‚ CO2
N1602
4-26
QMX3.P74
Room operator unit KNX with sensors for temperature‚ humidity‚ CO2‚ segmented
backlit display‚ touchkeys
N1602
4-27
QPA84
Indoor air quality controller with integrated VOC sensor for mixed gas
N1571
5-40
QVE1900
Flow switch for use in hydraulic systems‚ PN10‚ DN32...200
N1592
5-21
NEW PRODUCT
Siemens Switzerland Ltd
Building Technologies Division
3
www.siemens.com/buildingtechnologies-productcatalog
2014
Type Overview
Product Number
Description
Datasheet
Page
QVE1901
Flow switch for use in hydraulic systems‚ PN25‚ DN20...200
N1594
5-39
QVM62.1
Duct sensor for air velocity
N1932
5-38
QXA2601
Condensation monitor‚ AC/DC 24 V
N3302
4-38
QXA2602
Condensation monitor‚ AC/DC 24 V‚ with remote sensor head (cable length 1.5 m)
N3302
4-38
QXA2603
Condensation monitor‚ AC 230 V
N3302
4-38
QXA2604
Condensation monitor‚ AC 230 V‚ with remote sensor head (cable length 1.5 m)
N3302
4-38
RDF301
Semi Flush-mount room thermostat with KNX communications‚ 2-/4-pipe fan coils or N3171
DX type equipment
6-19
RDF301.50
Semi Flush-mount room thermostat with KNX communications‚ 2-/4-pipe fan coils or N3171
DX type equipment‚ four buttons for switching lights and blinds
6-19
RDF301.50H
Hotel Semi Flush-mount room thermostat with KNX‚ 2-/4-pipe fan coils or DX type
equipment‚ four buttons hotel functions
N3171
6-19
RDF600KN
Semi Flush-mount room thermostat with KNX communications‚ 2-/4-pipe fan coils or N3171
DX type equipment
6-19
RDG100KN
Room thermostat with KNX communications‚ AC 230 V‚ for fan coil units and universal N3191
applications
6-17
RDG160KN
Room thermostat with KNX communications‚ AC 24 V‚ for fan coil units and universal N3191
applications‚ fan (1-/ 3-speed‚ DC)‚ valves (2-point‚ DC)
6-18
RDG400KN
Room thermostat with KNX communications‚ AC 24 V‚ VAV heating and cooling systems
N3192
6-20
RDU341
Semi Flush-mount room thermostat for rectangular conduit box with KNX communi- N3172
cations‚ for VAV application
6-21
6-23
RMB795B-1
Central control unit RMB795B-1 with languages de‚ fr‚ it‚ es‚ pt
N3122
RMB795B-2
Central control unit RMB795B-2 with languages de‚ fr‚ nl‚ en
N3122
6-23
RMB795B-3
Central control unit RMB795B-3 with languages da‚ fi‚ no‚ sv
N3122
6-23
RMB795B-4
Central control unit RMB795B-4 with languages cs‚ sk‚ pl‚ hu‚ ru‚ bg
N3122
6-23
RMB795B-5
Central control unit RMB795B-5 with languages ro‚ sl‚ sr‚ hr‚ el‚ tr
N3122
6-23
RMB795B-6
Central control unit RMB795B-6 with language zh
N3122
6-23
RMH760B-1
Heating controller with languages de‚ fr‚ it‚ es
N3133
5-10
5-10
RMH760B-2
Heating controller with languages de‚ en‚ fr‚ nl
N3133
RMH760B-3
Heating controller with languages da‚ fi‚ sv‚ no
N3133
5-10
RMH760B-4
Heating controller with languages pl‚ cs‚ sk‚ hu‚ ru‚ bg
N3133
5-10
5-10
RMH760B-5
Heating controller with languages sr‚ hr‚ sl‚ ro‚ el‚ tr
N3133
RMK770-1
Boiler sequence controller with languages de‚ fr‚ it‚ es
N3132
5-13
RMK770-2
Boiler sequence controller with languages de‚ fr‚ en‚ nl
N3132
5-13
RMK770-3
Boiler sequence controller with languages da‚ fi‚ sv‚ no
N3132
5-13
RMK770-4
Boiler sequence controller with languages pl‚ cs‚ sk‚ hu‚ ru‚ bg
N3132
5-13
RMK770-5
Boiler sequence controller with languages sr‚ hr‚ sl‚ ro‚ el‚ tr
N3132
5-13
RMS705B-1
Switching and monitoring device with languages de‚ fr‚ it‚ es‚ pt
N3124
5-34
RMS705B-2
Switching and monitoring device with languages de‚ fr‚ nl‚ en
N3124
5-34
RMS705B-3
Switching and monitoring device with languages da‚ fi‚ no‚ sv
N3124
5-34
RMS705B-4
Switching and monitoring device with languages pl‚ cs‚ hu‚ ru‚ sk‚ bg
N3124
5-34
RMS705B-5
Switching and monitoring device with languages el‚ ro‚ sl‚ sr‚ hr‚ tr
N3124
5-34
5-34
RMS705B-6
Switching and monitoring device with language zh
N3124
RMU710B-1
Universal controller‚ 1 control loop‚ with languages de‚ fr‚ it‚ es
N3150
5-23
RMU710B-2
Universal controller‚ 1 control loop‚ with languages de‚ en‚ fr‚ nl
N3150
5-23
RMU710B-3
Universal controller‚ 1 control loop‚ with languages da‚ fi‚ sv‚ no
N3150
5-23
RMU710B-4
Universal controller‚ 1 control loop‚ with languages cs‚ hu‚ pl‚ sk‚ ru‚ bg
N3150
5-23
RMU710B-5
Universal controller‚ 1 control loop‚ with languages sr‚ hr‚ sl‚ ro‚ el‚ tr
N3150
5-23
RMU710B-6
Universal controller‚ 1 control loop‚ with language zh
N3150
5-23
RMU720B-1
Universal controller‚ 2 control loops‚ with languages de‚ fr‚ it‚ es
N3150
5-23
RMU720B-2
Universal controller‚ 2 control loops‚ with languages de‚ en‚ fr‚ nl
N3150
5-23
RMU720B-3
Universal controller‚ 2 control loops‚ with languages da‚ fi‚ sv‚ no
N3150
5-23
RMU720B-4
Universal controller‚ 2 control loops‚ with languages cs‚ hu‚ pl‚ sk‚ ru‚ bg
N3150
5-23
RMU720B-5
Universal controller‚ 2 control loops‚ with languages sr‚ hr‚ sl‚ ro‚ el‚ tr
N3150
5-23
RMU720B-6
Universal controller‚ 2 control loops‚ with language zh
N3150
5-23
RMU730B-1
Universal controller‚ 3 control loops‚ with languages de‚ fr‚ it‚ es
N3150
5-23
RMU730B-2
Universal controller‚ 3 control loops‚ with languages de‚ en‚ fr‚ nl
N3150
5-23
4 NEW PRODUCT
Siemens Switzerland Ltd
Building Technologies Division
www.siemens.com/buildingtechnologies-productcatalog
2014
Type Overview
Product Number
Description
Datasheet
RMU730B-3
Universal controller‚ 3 control loops‚ with languages da‚ fi‚ sv‚ no
N3150
Page
5-23
RMU730B-4
Universal controller‚ 3 control loops‚ with languages cs‚ hu‚ pl‚ sk‚ ru‚ bg
N3150
5-23
RMU730B-5
Universal controller‚ 3 control loops‚ with languages sr‚ hr‚ sl‚ ro‚ el‚ tr
N3150
5-23
RMU730B-6
Universal controller‚ 3 control loops‚ with language zh
N3150
5-23
RMZ780
Module connector
N3138
5-15
RMZ782B
Heating circuit module
N3136
5-11
RMZ783B
DHW module
N3136
5-11
RMZ785
Universal module (8UI)
N3146
5-15
RMZ787
Universal module (4UI‚ 4DO)
N3146
5-15
RMZ788
Universal module (4UI‚ 2AO‚ 2DO)
N3146
5-15
RMZ789
Universal module (6UI‚ 2AO‚ 4DO)
N3146
5-15
RMZ790
Plug-in type operator unit
N3111
5-14
RMZ791
Detached operator unit with 3 m cable
N3112
5-14
RMZ792
Bus operator unit
N3113
5-14
RXB21.1/FC-10
Room controller for 3-speed fan
N3873
4-40
RXB21.1/FC-11
Room controller for 3-speed fan
N3873
4-40
RXB22.1/FC-12
Room controller with 3-speed fan and electric heating coil
N3873
4-40
RXB24.1/CC-02
Room controller for chilled ceilings and radiators
N3874
4-40
RXB39.1/FC-13
Room controller for fan-coil applications with KNX communication
N3875
4-41
RXC10.5/00010
Radiator‚ chilled ceilings and VAV room controller with LonWorks communication and N3830
basic application OOO10
4-44
RXC20.5/00020
Room controller for fan coils with 1-speed fan or chilled ceiling/radiator with basic ap- N3834
plication OOO20
4-45
RXC21.5/00021
Room controller for fan coils with 3-speed fan and/or outside air damper with basic
application OOO21
N3834
4-45
RXC22.5/00022
Room controller for fan coils with 3-speed fan and electric reheater with basic appli- N3834
cation OOO22
4-45
RXC30.5/00030
Radiators‚ chilled ceilings‚ lighting‚ base module with LonWorks communication‚ basic N3840
application 00030
4-47
RXC31.5/00031
VAV base module with LonWorks communication‚ basic application 00031
N3844
4-48
RXC32.5/00032
VAV room controller with LonWorks communication‚ basic application 00032
N3845
4-49
RXC39.5/00039
Communicating room controller‚ with LonMark compatible bus communication
N3856
4-46
RXC40.5
Extension module for lighting control
N3842
4-50
RXC41.5
Extension module for blinds control
N3843
4-50
RXL21.1/FC-10
Room controller for 3-speed fan
N3877
4-36
RXL21.1/FC-11
Room controller for 3-speed fan
N3877
4-36
RXL22.1/FC-12
Room controller with 3-speed fan and electric heating coil
N3877
4-36
RXL24.1/CC-02
Room controller for chilled ceilings and radiators
N3878
4-36
RXL39.1/FC-13
Communicating room controller for fan-coil applications with proprietary communi- N3876
cation
4-37
RXM21.1
KNX PL-Link I/O block for use with a PXC3.. series room automation station
N3835
4-21
RXM39.1
KNX PL-Link I/O block for use with a PXC3.. series room automation station
N3836
4-22
RXT20.1
Service unit with LCD
N3851
4-60
RXZ01.1
Bus terminator 52.3 Ohm for LonWorks bus
N3861
3-14
RXZ02.1
Bus terminator 105 Ohm for LonWorks bus
N3861
3-14
RXZ20.1
Terminal cover for RXA2../ RXB2../ RXL2../ RXC2..
N3834
4-37
RXZ30.1
Terminal cover for RXB3.. / RXL3.. / RXC3..
N3840
4-37
RXZ40.1
Terminal cover for RXC4.. and AQX2000
N3842
4-50
RXZ95.1/LON
Radio frequency receiver with Gateway EnOcean/LonWorks‚ AC / DC 24 V‚ external an- N1661
tenna
4-58
RXZ97.1/KNX
Radio frequency receiver with Gateway EnOcean/KNX
N1662
4-58
RYT182
Changeover thermostat‚ changeover‚ 30 °C / 19 °C‚ IP54
N1295
5-39
S 425/72
IR remote‚ silver
SEA45.1
Current valve
N4937
SEM61.4
Signal converter DC 0…10 V or DC 0 / 10 V in AC 0 / 24 V
N5102
5-40
SEM62.1
Transformer
N5536
6-30
4-32
5-40
SEM62.2
Transformer with switch and replaceable fuse
N5536
6-30
SEZ220
Signal converter with preprogrammed applications
N5146
5-40
NEW PRODUCT
Siemens Switzerland Ltd
Building Technologies Division
5
www.siemens.com/buildingtechnologies-productcatalog
2014
Type Overview
Product Number
Description
Datasheet
Page
SSA81
Electromotoric actuator‚ 100 N‚ 2.5/5 mm‚ 1.5 m‚ AC 24 V‚ 3P
N4893
4-38
SSB81
Electromotoric actuator‚ 200 N‚ 5.5 mm‚ AC 24 V‚ 1.5 m‚ 3P
N4891
4-38
SSP81
Electromotoric actuator‚ 160 N‚ 2.5 mm‚ 1.5 m‚ AC 24 V‚ 3P
N4864
4-38
STA73PR/00
Electrothermal actuator‚ AC/DC 24 V‚ NC‚ 2P‚ PDM‚ PR
N4884
4-38
STP73PR/00
Electrothermal actuator‚ AC/DC 24 V‚ NO‚ 2P‚ PDM‚ PR
N4884
4-38
TXA1.5K120
Address key 5‚ 10 ... 120 + 2 reset keys
N8170
3-27
TXA1.IBE
Island bus expansion module for decentralized sub-islands with TX-I/O-modules
N8184
3-26
TXA1.K-120
Address keys 97-120 + 2 reset keys
N8170
3-27
TXA1.K-48
Address keys 25-48 + 2 reset keys
N8170
3-27
TXA1.K-72
Address keys 49-72 + 2 reset keys
N8170
3-27
TXA1.K-96
Address keys 73-96 + 2 reset keys
N8170
3-27
TXA1.K12
Address Keys 1-12 + reset key
N8170
3-27
TXA1.K24
Address Keys 1-24 + 2 reset keys
N8170
3-27
TXA1.LA4
Labels (sheet A4 with 9 labels)
N8170
3-27
3-27
TXA1.LH
Spare transparent label holders (10 pcs.)
N8170
TXB1.PBUS
P-bus interface module
N8180
3-27
TXI1.OPEN
TX Open RS232/485 module for integrating third-party systems and devices to Desigo N8185
3-25
TXM1.16D
16 Digital Input Module
N8172
3-21
TXM1.6R
6 Relay output module
N8175
3-22
TXM1.6R-M
6 Relay output module with Override
N8175
3-22
TXM1.6RL
6 Relay output module‚ bistable
N8177
3-22
TXM1.8D
8 Digital Input Module
N8172
3-21
TXM1.8P
8 Resistance measuring input module
N8176
3-23
TXM1.8RB
8 Relay output module for blinds control
N8178
4-17
TXM1.8T
8 Triac output module
N8179
3-23
TXM1.8U
8 Universal I/O Module
N8173
3-23
TXM1.8U-ML
8 Universal I/O Module‚ Override and LCD
N8173
3-24
TXM1.8X
8 Universal I/O Module‚ 4-20mA‚
N8174
3-24
3-24
TXM1.8X-ML
8 Universal I/O Module‚ 4-20mA‚ Override and LCD
N8174
TXS1.12F10
TX-I/O Power Supply Modules 24 VDC Supply 1200 mA‚ 10 A Fuse
N8183
3-26
TXS1.EF10
BUS Connection Module‚ 10A Fuse
N8183
3-26
UA1T
Power amplifier for thermal actuators AC 24 V‚ PWM
N3591
4-37
UP 117/11
Bus coupling unit
4-32
UP 220D31
Pushbutton interface‚ 4 x potential-free contact‚ output for LED control
4-23
4-29
UP 221/12
Pushbutton‚ single‚ without status LED‚ titanium white
UP 221/13
Pushbutton‚ single‚ with status LED‚ titanium white
4-29
UP 221/32
Pushbutton‚ single‚ without status LED‚ aluminum metallic
4-29
UP 221/33
Pushbutton‚ single‚ with status LED‚ aluminum metallic
4-29
UP 222/12
Pushbutton‚ double‚ without status LED‚ titanium white
4-29
UP 222/13
Pushbutton‚ double‚ with status LED‚ titanium white
4-29
UP 222/32
Pushbutton‚ double‚ without status LED‚ aluminum metallic
4-29
UP 222/33
Pushbutton‚ double‚ with status LED‚ aluminum metallic
4-29
UP 223/12
Pushbutton‚ triple‚ without status LED‚ titanium white
4-29
UP 223/15
Pushbutton‚ triple‚ with status LED‚ with scene controller‚ with IR receiver decoder‚ titanium white
4-30
UP 223/32
Pushbutton‚ triple‚ without status LED‚ aluminum metallic
4-29
UP 223/33
Pushbutton‚ triple‚ with status LED‚ aluminum metallic
4-29
UP 223/35
Pushbutton‚ triple‚ with status LED‚ with scene controller‚ with IR receiver decoder‚ aluminum metallic
4-30
UP 258D11
Motion detector with brightness sensor
4-34
UP 285/12
Pushbutton‚ single‚ without status LED‚ titanium white
4-31
UP 285/13
Pushbutton‚ single‚ with status LED‚ titanium white
4-31
UP 285/42
Pushbutton‚ single‚ without status LED‚ platinum metallic
4-31
UP 285/43
Pushbutton‚ single‚ with status LED‚ platinum metallic
4-31
UP 286/12
Pushbutton‚ double‚ without status LED‚ titanium white
4-31
UP 286/13
Pushbutton‚ double‚ with status LED‚ titanium white
4-31
UP 286/42
Pushbutton‚ double‚ without status LED‚ platinum metallic
4-31
6 NEW PRODUCT
Siemens Switzerland Ltd
Building Technologies Division
www.siemens.com/buildingtechnologies-productcatalog
2014
Type Overview
Product Number
Description
UP 286/43
Pushbutton‚ double‚ with status LED‚ platinum metallic
Datasheet
UP 287/12
Pushbutton‚ quadruple‚ without status LED‚ titanium white
4-31
UP 287/13
Pushbutton‚ quadruple‚ with status LED‚ titanium white
4-31
UP 287/15
Pushbutton‚ quadruple‚ with status LED‚ with scene controller‚ with IR receiver decoder‚ titanium white
4-31
UP 287/42
Pushbutton‚ quadruple‚ without status LED‚ platinum metallic
4-31
UP 287/43
Pushbutton‚ quadruple‚ with status LED‚ platinum metallic
4-31
UP 287/45
Pushbutton‚ quadruple‚ with status LED‚ with scene controller‚ with IR receiver decoder‚ platinum metallic
4-31
NEW PRODUCT
Siemens Switzerland Ltd
Building Technologies Division
Page
4-31
7
www.siemens.com/buildingtechnologies-productcatalog
2014
System functions
1
Desigo – the energy-efficient and flexible building automation and
control system
1-2
Desigo system topology
1-3
System functions
1-4
Trend and history function
1-5
Alarm management
1-6
Schedulers/calendar
1-7
Access rights
1-8
Monitoring functions
1-9
Communication – network
1-10
1
System functions
Desigo – the energy-efficient and flexible building automation and control system
DesigoTM is a modern building automation and control system (BACS) for the entire field of building systems. With system functions such
as alarm management, time scheduling and trend logging, combined with advanced control functions, Desigo is a highly versatile asset
in a building. Innovative Web technology, powerful databases and open communication make Desigo a financially wise investment in
the future. Scalable from small to large projects with the highest degree of energy efficiency, transparency and optimum operational
management as well as applications for infrastructure and industry.
Desigo is consistent in its support of open communication, making it easy to connect a wide variety of building services systems on the
basis of standard open data interfaces:
•
•
•
•
BACnetTM from room automation to the management level
KNX®, DALI, EnOcean® and LonWorks® to network room automation and secondary processes
M-bus, Modbus, OPC, MS/TP and other interfaces for universal connection of third-party devices and systems
Ethernet TCP/IP network protocol
Highest degree of energy efficiency
The tested Desigo plant applications comply with European standard EN 15232 in the highest
energy performance classes. Their use, for example, can reduce energy costs for volume flow control
of ventilation plants up to 30% compared to constant air volume control. In addition, a number of
Desigo room applications are already eu.bac-certified.
The high level of overall Desigo system functionality is the prerequisite for eu.bacsystem certification.
Also, a number of Desigo room automation products have eu.bac product certification. The combination of both certifications ensures the highest level of energy efficiency in the building.
Desigo offers monitoring functions for room users and facility managers by means of comprehensive
indication of the efficiency status in a building. The Green Leaf symbol indicates unnecessary energy
consumption in the building to room users. Indication of building efficiency is indicated in the same
way to facility managers on the Desigo management station. Both room users and facility managers
can ensure interactively the highest possible building efficiency.
Investment protection over the building’s entire life-cycle
With its flexible range of automation stations and operator units, Desigo is ideally suited for projects of
all sizes and for all types of buildings.
Consistent compatibility protects investment over decades and throughout the entire building lifecycle. Desigo integrates existing automation systems Visonik, Unigyr or Integral seamlessly and carries
them forward into the future. Changes in use, system extension and retrofit projects can all be handled
in gradual stages.
1-2
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
System functions
Desigo system topology
The Desigo system can be subdivided into two levels:
•
•
Management level
Automation level
The automation level forms the interface to the field level and includes room automation as well. By virtue of distributed intelligence,
each of these levels operates both autonomously and in a network.
The principal Desigo system components
•
The Desigo management station for superimposed operation
and monitoring, graphics-based display of the process, automatic alarm distribution and a wide range of different data
analysis options using standardized protocols
•
•
Desigo PX automation range for control, operation and moni- •
toring of primary plants. Desigo Touch and Web can operate
the plant via touch panel or Web client
Compact and proven Desigo room automation system RX for
autonomous comfort control in individual rooms
•
Desigo TX-I/O modules, which provide the interface to the
devices at the field level, the sensors and actuators
Desigo Open for the integration of a wide variety of plants and
protocols at all system levels
•
Desigo Total Room Automation (TRA) is an open and
programmable room automation product range covering
lighting, shading, and HVAC and allowing for individually
tailored room solutions at a high level of energy efficiency
Desigo system topology
One of the key benefits of Desigo is its scope for gradual extensions, from the smallest systems to large, geographically distributed
systems.
1-3
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
1
1
System functions
System functions
Facility managers and room users of the Desigo system have a versatile range of tools at their disposal, offering convenient access to the
system and the plant.
Operation and monitoring
Operator station
•
The Desigo management station is a powerful and user-friendly interface for monitoring the overall system. Access and alarm
management can be matched to the user’s level of responsibility in the building. For example, alarms can be assigned based on the
user. Desigo Web and Desigo Terminal Server allow access to the management level using Web technology
•
Desigo Touch and Web operate and monitor the Desigo PX automation level using a standard Web browser (HTML5 technology) on
various hardware platforms (e.g. tablets, notebooks/PCs, smartphones)
Room operator unit
•
The QMX3 room operator unit with KNX PL-Link communication and optional Green Leaf symbol offers users functionality precisely
matched to need
•
QAX.. with or without display and operating element offers functionality matched to the specific needs of the user and the elegant
QAX devices support both KNX and LonWorks communications as well as wireless EnOcean technology
Plant operation
•
The Desigo touch panels PXM40 (10 inch) and PXM50 (15 inch) to operate and monitor the Desigo PX automation level with graphical display, optimized to intuitive finger operation
•
The user-friendly, graphics-based PXM10 operator unit facilitates full local operation of the Desigo PX automation stations
•
The PXM20 network-compatible graphics-based operator unit presents Desigo PX plant and system information in an easy-tounderstand format with a clear-text commentary
Manual operation
•
The Desigo TX-I/O modules include facilities for manual/emergency operation of plants and for the display of operating states
Desigo operating levels
1-4
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
System functions
Trend and history function
Fully integrated trend data processing allows effortless evaluation and analysis of real-time (online) data and (offline) historical data.
The trend feature facilitates the monitoring and fine-tuning of the plant. In the Desigo system, this feature is implemented in the form of
Trendlog and TrendlogMultiple objects, in compliance with the BACnet standard.
Trend logging options
Sampling options
•
Continuous logging
•
Polling
•
Single run
•
COV polling (Change of Value)
•
Logging over a specified period
•
Event-driven polling
Trend graphs can be displayed on the management station. In addition, the touch panels PXM40/PXM50 and operator units PXM20 as
well as PX-Web can display Desigo PX trend graphs. The management station also allows displays in color and in 2D or 3D.
Trend display for example on the Desigo Insight management station and on the touch panels PXM40/PXM50
Online trend features
Offline trend features
•
•
Offline data display – no permanent connection required
•
Longer periods of time (days, months)
•
Data acquisition in the automation system
•
Data are uploaded to the management level at regular
intervals or as needed
•
Real-time display of process data
Based on changes in the value of a data point (COVs) or on
periodic sampling by Trend Viewer (times can be configured)
1-5
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
1
1
System functions
Alarm management
One of the most important functions of a BACS is automatic alarming in the event of faults in building services plants. The management
of alarms (generation, display and handling) must be simple, efficient and consistent at all levels of the system. Desigo uses the BACnet
alarm functions and supports the following three types of alarms with up to 256 alarm priority levels:
•
•
•
Basic alarm (for alarms not requiring user interaction)
Simple alarms (for alarms requiring acknowledgment)
Extended alarms (alarms requiring acknowledgement and reset)
Alarm messages
•
When an alarm occurs, it is automatically detected, registered and transferred to operator units such as the touch panels PXM40/
PXM50, the PXM20, or to the Desigo management station. Informative alarm messages are also transmitted to remote devices such
as mobile phones, fax machines, printers or PCs and web browsers, via SMS and e-mail. The management station further separates
alarms in a customized manner so that each user receives only those alarms that correspond to his/her level of responsibility.
Alarm lists provide a view of all pending and time-stamped alarms at a glance and permit straightforward processing. Operators are
alerted to incoming and pending alarms with pop-up windows and audible and visual signals.
Alarms for example on touch panels PXM40/PXM50 and on the Desigo Insight management station
Alarm routing
•
Alarms are transferred on the basis of time of day, priority and/or plant type, using a truly powerful alarm routing system at the management station. This ensures the uninterrupted routing of alarms, irrespective of whether or not there is an operator sitting at the
management station. Users are supported in their work by various overview options which help ensure a fast and correct response
even in critical alarm situations.
1-6
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
System functions
Schedulers/calendar
One of the basic functions of a BACS is time control of procedures and processes and ensuring energy-efficient operation.
Scheduler programs ensure that the heating and lighting are switched off automatically at the end of the workday, that the temperature
in the building is reduced at night, and that the plant is not kept running for longer than necessary. They can also be used to switch off
the air conditioning in certain rooms during holidays.
Using standard BACnet functions, the BACnet scheduler programs can be operated system-wide from the user-friendly touch panels
PXM40/PXM50, the operator units PXM20 and PX-Web as well as from the Desigo management station.
Scheduler program for example on the Desigo Insight management station and on touch panels PXM40/PXM50
For safety reasons, schedules and calendars are stored in the Desigo PX automation station, so that in the event of a network or
PC failure, the automation level can continue to operate autonomously.
1-7
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
1
1
System functions
Access rights
Access rights can be used to filter information from the plant and system based on the individual requirements of a user. The caretaker or
service engineer, for example, only has access to information important to him. A distinction can also be made between read access and
write access.
Freely-definable access rights
Only authorized personnel are granted access to the system via the operator units. When a user enters a user name and password, the
system verifies the associated access rights and enables access to the relevant plant. Read and write access rights can be defined in
detail, right down to individual information points.
The following access classes are supported in the Desigo system:
•
•
•
Internal, service and standard service
Administration and experts
Standard and customer
Efficient plant overview
For simple and efficient plant overview, the Desigo touch panels PXM40/PXM50 can display the most important plant values on an
overview page, even without logging on.
1-8
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
System functions
Monitoring functions
Increasing building efficiency/saving energy and extending the life of a plant
Thanks to sophisticated monitoring functions, Desigo provides comprehensive indication of the efficiency status in the building. Feedback occurs via uniform, easy-to-understand Green Leaf symbol, adjusted to knowledge and possible types of influence on the part of
facility managers and room users.
The Desigo Eco Monitoring system function provides immediate feedback of the efficiency status of primary plants. Inefficient plant
operation is indicated by an automatic change of color of the Green Leaf symbol from green to red. SMS, fax, or e-mail informs on uncommon events as needed. The facility manager can quickly and efficiently analyze the problem and find a solution before unnecessary
energy is consumed and wear and tear occurs.
The RoomOptiControl function of Desigo TRA automatically detects unnecessary energy consumption in the room. This is indicated to the
room user via a change of color of the Green Leaf symbol from green to red on the QMX3 room operator unit. When pressing the symbol,
room control resumes energy-optimized operation. Then, the Green Leaf symbol will again return to green.
Green Leaf symbol for example on the Desigo Insight management station and on the QMX3 operator unit
1-9
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
1
1
System functions
Communication – network
Communication standards specially developed for building systems
Compliant devices can be interconnected at low cost using the BACnet (Building Automation and Control network) open communication
protocol. The worldwide BACnet standard was developed specifically for the needs of building services, under the auspices of ASHRAE
(the American Society of Heating, Refrigerating and Air-Conditioning Engineers). BACnet networks provide all subscribers with access to
all the data and functions of the connected devices.
BACnet, KNX and LonWorks
•
For the exchange of information among its own system components, Desigo uses three standard protocols, recognized worldwide:
BACnet, KNX (EIB) and LonWorks. Desigo uses the BACnet communication protocol to exchange information between the individual
Desigo PX automation stations and the Desigo TRA room automation stations on the one hand, and to the Desigo management
station on the other.
Desigo uses IP, LonTalk or PTP (point-to-point, modem or null modem) as the transport medium.
Furthermore, Desigo supports integration of BACnet/MSTP subsystems. The PXG3 router provides transparent BACnet traffic between the MSTP and IP network (BACnet/IPv4 as well as BACnet/IPv6) and, optionally, to LonTalk as an addition.
The integrated KNX connection on Desigo TRAs room automation station PXC3 permits direct integration of both devices with the
KNX PL-Link as well as KNX S-Mode in Desigo TRA. Communication between room automation stations and field devices with KNX
PL-Link is optimized within the framework of the KNX standard for available plug-and-play functionality including automatic device
recognition. Desigo Tools parameterize devices with the KNX PL-Link; the KNX commissioning software (ETS) is not required. A broad
selection of Siemens field devices, including room operator units, buttons, motion detectors, or VAV compact controllers support
the KNX PL-Link.
Also, the Desigo RX room automation product range communicates per LonMark standard or KNX S-Mode (EIB).
Thanks to the support of the BACnet Life Safety objects, simple and secure connection to fire detection systems such as Sinteso FS20
or Cerberus PRO to Desigo is possible without problems.
•
BACnet certification
All Desigo PX and TRA BACnet servers as well as the Desigo management station were submitted to the BACnet Interest Group
Europe (BIG-EU) for compliance testing based on the BACnet standard DIN EN ISO 16484-5 and successfully certified. A well-known
testing institution conducted the comprehensive testing.
The management, automation, and room automation stations are all implemented as full BACnet nodes. BACnet is integrated directly without the need for any special data conversion.
The Desigo PX automation stations satisfy the B-BC profile (BACnet Building Controller). The Desigo management station satisfies
the B-AWS profile (BACnet advanced workstation). The Desigo TRA room automation stations support a BACnet object’s scope (BACnet B-ASC profile) adjusted to room automation.
AMEV guideline
Open communication between various systems using a common automation and operating concept are key functions for energy-saving
and reliable plant operation. As a consequence, Desigo meets in full the AMEV guideline „BACnet 2011“ with the following profiles:
•
•
Desigo management station:
Desigo PX:
AMEV profiles MBE-A and MBE-B
AMEV profiles AS-A and AS-B
DALI, EnOcean
•
DALI, EnOcean, and KNX devices turn the PXC3 room automation stations of Desigo TRA into a complete solution for the room.
The optional DALI bus of the room automation stations allow for simple integration of different lamps and luminaires. DALI (Digital
Addressable Lighting Interface) is a worldwide standard that applies specifically to lighting control at cost-efficient two-wire technology and integrated power supply.
Self-powered EnOcean radio technology offers wireless connection of field devices based on extremely energy-saving technology.
The operating energy required by the devices is taken directly from the environment. The wireless room units QAX9..4 can be used
via EnOcean/LonWorks or EnOcean/KNX gateway with Desigo TRA or RX.
1-10
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
System functions
Communication – network
Web-Technology
•
The remote desktop connection and Web communication make optimum use of the advantages of modern IT technology for the
benefit of building services. Properly selected and used, they have a significant influence on the ability to fine-tune the running of
the building and on the comfort and satisfaction of building users. This reduces maintenance and upkeep costs.
Terminal Server
•
The Terminal Server connection provides all management station functions as remote desktop connection in the network allowing
users to simultaneously access the functions in independent sessions. In addition to operation and monitoring programs for the
day-to-day operation of the plant, engineering tools are also provided, allowing modifi cation and extension of the system while it
is running. This makes the remote desktop connection the optimum solution for professional facility managers who need unrestricted access to building data via their intranet or extranet, from any location.
Web communication
•
The programs for operation of the management system are mapped in special interfaces optimized for state-of-the art Web browsers.
Desigo Touch and Web
•
Desigo Touch and Web permits operation and monitoring of the Desigo PX automation level using the Desigo touch panels PXM40
and PXM50 as well as via the standard Web browser (HTML5 technology) on various hardware platforms (e.g. tablets, notebooks/
PCs, smartphones). The BACnet/IP Web interface PXG3.W100 supports in a straightforward manner flexible and remote access to
the BACS via LAN/W-LAN connections.
1-11
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
1
1
Notes
1-12
3-12
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Management functions
2
Desigo CC
2-2
Desigo Insight
2-6
Informations-Management
2-9
Management functions
Desigo CC
Desigo Control Center
2
Desigo CC is an integral component of the Desigo building automation system. As a building automation management station, Desigo
CC provides a full breadth of application support for ensuring that facilities remain comfortable, productive, and achieve optimal energy
and equipment performance. On top Desigo CC offers full integration of fire safety, and live IP camera systems.
Desigo CC System Architecture
A well-defined user interface, coupled with standard protocol support, integration capabilities, and multiple client options that allow full
operation and configuration from anywhere, make Desigo CC the perfect tool for maintaining facility operation.
•
•
•
•
•
Graphically monitor and control the building automation infrastructure.
Schedule and modify mechanical equipment operation and automatic report generation
Collect, view, analyze and compare trend information
Make management decisions with information and reporting capabilities
Store and retrieve long-term information
The Desigo CC management station is designed to provide a single, easy-to-use point of access to the entire installation used in your
facility.
2-2
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog 2014
Management functions
Desigo CC
2
Desigo CC User Interface
Whether your network is limited to a single floor, or it encompasses multiple buildings, Desigo CC allows you to monitor and control any
area or device within the system from one place.
Desigo CC is a flexible full client-server architecture for building automation and fire
safety applications allowing configurations from small single-seat to large multi-user
installations. Desigo CC can be installed completely on one computer, with full server and client functionality. Additional clients (dedicated, browser, and Windows desktop application) can be also be added. Additional system connections can be made through systems
installed with a Desigo CC Front End Process (FEP) configuration.
An IIS server for Browser Clients and Desktop Application downloads can be installed
on the server or on a separate installation.
Desigo CC runs on the latest 64-bit operating systems like Windows 7 64-bit or Windows Server 2008 R2.
Open Integration Platform
Desigo CC is an open system built on a proven SCADA technology and supports a variety of open system protocols and IT standards.
Open System Standard Protocols
• BACnet. Certified by BACnet Testing Laboratory as BACnet Advanced Workstation Software (BTL B-AWS), including support for Life
Safety Points and Life Safety Zones.
• OPC DA2.0.
• ONVIF. Standard for IP video camera systems
IT Standards
• SNMP (V1 and V2). IP device monitoring
• WMI. Computer hardware monitoring
• SMTP, PO3, IMAP. For email delivery
• Microsoft SQL Server. Trend and History data storage
• HTTP(S). Client-server communication
• DWG, DXF. AutoCAD import formats
2-3
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Management functions
Desigo CC
2
Application Support
Representative data points in Desigo CC can be created manually, imported through data exchange files, or uploaded through a selective
auto-discovery mechanism depending on the type of system being connected.
A unique, extensible object modeling approach allows Desigo CC to normalize information brought in through any interface, and to provide the same look, feel and operation through a common set of applications, without concern for the source of the data. As a true integration platform, Desigo CC allows you to configure connected subsystems directly, as well as perform typical controller functions (such
as scheduling, trending, and event generation) at the workstation for connected systems that do not support those functions directly.
Desigo CC is designed to provide the ultimate user experience for all of your building systems. Whether they are monitoring fire safety
events, ensuring optimal comfort and building performance, or modifying system configuration, the flexible user interface of Desigo CC
supports just the right environment for every situation.
Event Management
Desigo CC provides a robust set of applications to ensure quick, easy, and accurate response to any events.
Client Profiles
To ensure the right level of event management support for users in any situation, workstation and/or users can be easily assigned predefined profiles supporting casual, intermediate, or dedicated event management notification and management.
Summary Bar
The Summary Bar is the anchor of Desigo CC event management. It highlights current conditions with clear indication of current event
priorities, and allows you to quickly open the Event List. Depending on the client profile in use, the Summary Bar can be docked on the
desktop or freely opened and closed as needed.
Event List
The Event list provides a complete and/or easily filtered list of events under control of the management station. The Event List gives clear
indication of each event source, severity, and current status, as well as custom messages and suggested action steps through the use of
text, color, and icon representations. Events can be acknowledged, silenced, and reset from the Event List.
Event Bar
When using profiles for critical event management, the Event List can be collapsed into a condensed list that remains docked on the
desktop for easy access. This patented design keeps current situations in focus at all times.
Investigative Treatment
From the Event List or Event Bar, operators can quickly open the System Manager with focus on the source of the event, and all information (live video, recent history, schedules, trends, etc.) related to the event source.
Assisted Treatment
From the Event List or Event Bar, operators can quickly open the Assisted Treatment to guide the operator through pre-configured operating procedures. Each operating procedure is made of configurable and sortable steps in order to, for example, to see the graphic of the
object in alarm, fill-in a treatmen form, automatically print on paper the information of the event.
Remote Notification
With the Remote Notification Option enabled, Desigo CC can be configured to automatically or manually send email or SMS messages to
first responders. In addition to simple notification, notification can also be escalated to second level responders when necessary.
System Manager
The System Manager application is used for navigating the system to view and override current conditions, analyze historical operation,
and to configure the system.
Navigation
The System Manager is built around the concept of a common workflow for all system navigation. This simple and consistent workflow
allows users to select from traditional applications, or better yet, select the part of the facility they are interested in and let the
system guide them to the most relevant information. From the initial starting point, user can make additional selections for more details,
act on the system, or navigate further to automatically calculated Related Items based on their selection. The well-defined pane-based
navigation keeps important information in front of the users with no overlapping windows. You can navigate the system through graphics or flexible Views that allow the system to be represented the way that users see their facility.
2-4
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog 2014
Management functions
Desigo CC
Graphics
Desigo CC graphics are built using smart objects that know how they are used and how to represent themselves graphically. The use of
smart objects allows you to create graphics by simply dragging and dropping objects onto a page, without manually binding object to
graphical symbols.
Text Viewer
The Text Viewer provides a quick summary of current value and status of any selected object(s) without any prior system configuration.
This is a handy tool for getting an overview of system status.
Trend and System Activity Logging
Both panel-based and workstation-based Trending is provided to support control systems without embedded Trend capabilities. Trend
and System Activity data is stored in a Microsoft SQL Server database. SQL Server Express is included with the Desigo CC software, and
can be upgraded as required. The Trend Comparison View allows you to time shift the Trend view to compare data at different times for
quick analysis of changing conditions.
Schedules
The Scheduling application allows complete configuration and monitoring of standard BACnet schedule, calendar, and command objects,
as well as for workstation base schedules that can be used to support systems without built-in scheduling capabilities. Schedules are
automatically associated to systems they control, so you can quickly navigate to schedules related to any selected object.
Reaction Processor
The Reaction Processor allows the engineer to programm Desigo CC in order to automatically execute given actions when some conditions are verified. Conditions can be based on time (e.g. every Monday at 7.00 am), on events (e.g. when air handling unit is in fault), on
change of values (e.g. when the temperature of a room is higher than 45° Celsius) or on a combination of all of them. When the conditions are met finally the Reaction Processor executes a pre-configured list of commands (e.g. switch-on the lights).
Reports
The Desigo CC reporting tool includes standard reporting templates and allows for creating fully configurable reports, with custom logos,
headers, footers, and layouts that include tabular and graphical system information. Reports can be scheduled, and saved in CSV or PDF
formats for future use.
Video Camera Viewer
Desigo CC can integrate IP video cameras for displaying live video streams. Cameras associated to locations or equipment can be easily
accessed through Related Items whenever live video is available. Pan, tilt, zoom capabilities are available with Axis camera equipment
that supports these features. Desigo CC supports a wide variety of IP based CCTV cameras. Built on the industry proven ONVIF standard,
Desigo CC enables viewing cameras from a wide variety of vendors as also and controlling Axis PTZ cameras.
2-5
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
2
Management functions
Desigo Insight
2
The clearly structured, modular and object-oriented software of the Desigo Insight management station is optimized to the current operating systems including Windows 7 and Windows 8 (business versions) or Windows Server 2012 featuring 64-bit technology.
The functional scope and ease of use of the software reduces operating costs and familiarization time while maintaining operational
reliability. The Desigo Insight applications are introduced below:
Applications in Desigo Insight
• Plant Viewer: Realistic plant graphics allowing fast, targeted
•
•
•
•
•
•
•
montoring and operation of the system
Scheduler: Central programming of all time-controlled building
services functions
Alarm Viewer: Detailed overview of alarms to quickly localize
and eliminate errors
Alarm Viewer Fire Safety: Detailed overview to quickly assess
fire detection system alarms
Alarm Router: Flexible routing of alarms to printers,
fax machines, mobile phones and e-mail
Trend Viewer: Convenient analysis of trend data to optimize
operations and increase energy efficiency
Report Viewer: Snapshot queries to meet customers’ needs
andtheir display in reports. Reports provide information on
plant operation analysis as well as evaluation and
documentation purposes
Object Viewer: An efficient tool for navigation through the
hierarchical tree structure to all the data points in the system.
These points can then be read or manipulated, depending on
the access rights of the user concerned
• Log Viewer: Alarms, errors and user activities are logged in
chronological order and can be displayed for further evaluation,
as needed
• Eco Viewer: Fast and easy analysis of the efficiency status of
primary plants
• Database Audit Viewer: Log unauthorized changes in
databases (audit trail) guaranteeing the highest possible data
integrity
• Reaction Processor: System-wide monitoring of plants and
processes based on certain criteria (events). The reaction
process triggers predefined (re) actions when one
(or a combination) of the criteria are met. Allows for centralized
time control of plants without scheduler programs/calendar
functions
• System Configurator: Used to configure the general setup of
the Desigo Insight management station and associated
applications
• Graphics Builder: Efficient creation of customized plant
graphics
• Online operator tools for existing systems
Plant Viewer
2-6
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog 2014
Management functions
Desigo Insight
Task bar
A task bar appears after starting Desigo Insight. It provides fast and direct access to all the user applications and displays important status information.
In the case of several remote plants, it is possible to switch from one plant to another via the task bar, subject to the appropriate access rights.
This ensures clear demarcation lines between the various levels of responsibility.
The user‘s entry into the system is simplified by user-specific start sequences with preselected programs and plant.
The Desigo Insight task bar
The icons on the task bar provide access to the main user applications:
Connect and disconnect sites
Login and logout, restart, lock or shutdown
Plant Viewer – the graphical interface to the plant
Alarm Viewer – displays the state of abnormal alarm points
Trend Viewer – displays graphs containing live data
Log Viewer – displays all event messages including alarms
Database Audit Viewer – logs unauthorized changes to databases
Object Viewer – shows all data points in the system, in list form
Eco Viewer: Fast and easy analysis of the efficiency status of primary plants
Scheduler – allows the user to modify plant switch times
Report Viewer – displays reports of momentary values recorded and compiled by the user
Reaction Processor – allows automatic triggering of cross-system process reactions
Alarm Router – routes alarms to printers, fax machines, mobile phones and e-mail systems
System fault indication
Online help
Number of connected sites
Pending alarms in order of priority
Pending fire safety alarms, e.g. from Sinteso FS20 or Cerberus PRO, sorted by priority
Green Leaf indication – higher, immediate feedback of the efficiency status of primary plants
Operation and monitoring with Web technology
Desigo Web and Desigo Terminal Server make optimum use of the advantages of modern IT technology for the benefit of building services.
• Properly selected and used, they have a significant influence on the ability to fine-tune the running of the building and on the comfort and
satisfaction of building users
• They distribute building information to the person who needs it, and in the exact location where it is needed
• In addition to flexibility of operation, both solutions contribute substantially to a reduction in the day-to-day costs of modifications,
extension, maintenance and data backup
• Both solutions are based on software standards and are therefore compatible with today‘s IT security strategies (firewalls, Virtual Private
Networks (VPN), etc.)
2-7
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
2
Management functions
Desigo Insight
Desigo Terminal Server
2
Desigo Terminal Server provides all the functions of the management system in the form of terminal services over the network. These services can be accessed simultaneously by different users in independent sessions. In addition to the operation and monitoring
programs for day-to-day operation of the plant, engineering tools are also provided, allowing modification and extension of the system
while it is running.
This makes the Desigo Terminal Server the optimum solution for professional facility managers who need unrestricted access to building
data via their intranet or extranet, from any location. All the user requires is a simple, standard network-compatible terminal device such
as a PC, Net PC or Web pad with a Microsoft operating system, without other installed software components (Thin Client).
Security is a top priority: Remote access from client devices is via Microsoft Remote Desktop Web Connection with the highly encrypted
Remote Desktop Protocol (RDP) 5.0 which uses RSA Security‘s RC4 cipher with the option of 40-, 56- or 128-bit encryption.
Desigo Terminal Server is based on the Windows Server operating system with the Terminal Server component and runs on standard
server hardware. The hardware and software specification depends on how intensively it is used, with the number of users requiring
simultaneous access being a decisive factor.
Desigo Web
Desigo Web is a genuine Web solution based on Microsoft IIS (Internet Information Server). The programs for operation of the management system are mapped to ASPs (Active Server Pages) in special interfaces optimized for current Web browser versions of Microsoft
Internet Explorer and Firefox.
Functions in Desigo Web
•
•
•
Operation of graphics (Plant Viewer)
Operation of data points (Object Viewer)
Alarms and log (Alarm Viewer, Log Viewer)
•
•
•
Trend data (Trend Viewer)
Schedules (Scheduler)
Report Viewer
This makes Desigo Web the optimum solution for those responsible for technical services (such as the caretaker, facility manager or security staff)
that track the day-to-day operation of the building and need easy access to all the key functions. In addition, it makes new options available,
enabling selected building data and user access to be allocated relevantly to tenants and users of the building (e.g. room operation, schedules
and display of room conditions).
Web Plant Viewer
2-8
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog 2014
Management functions
Energy reports
Energy Reports can easily check a building for energy efficiency based on predefined reports. The data evaluation and reporting program guarantees gap-free processing and presentation of all operational data.
The high availability and optimum use of building services plants are very important. In pursuit of this goal, Energy Reports represents a basic
requirement.
Energy Reports compiles powerful reports from the data stored in the process data management database in any number of combinations and
selectable periods. The reports can be displayed and printed in various forms.
Example of a line graph showing the metered energy consumption and
the comparative values of the previous year.
Energy Reports focuses on the powerful presentation of consumption data.
•
•
•
•
The following report templates are available to efficiently create Energy Reports:
- Energy consumption report
- Energy cost report
- Weighted consumption report
- Corrected heating degree day report
- Energy benchmark report
- CO2 benchmark report
Multiple reports can be generated and stored for each report type
Up to 10 data series per report are possible
Comparison reports with previous years (1-2 years)
2-9
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
2
Notes
2
2-10
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog 2014
Automation control
3
Overview and selection tool
Automation stations
System topology
3-2
Overview
3-3
Compact series PXC..
3-5
Modular series PXC..D
3-8
PX System Controller
3-10
Desigo™ PX Open
3-11
Desigo™ NET
3-14
Integral migration PXC-NRU..
3-15
Operator units
Operation and monitoring: PXM.. / PXG3.W100
3-16
Desigo TX-I/O™
I/O Module TXM..
3-21
Desigo™ TX Open
3-25
Accessories Desigo TX-I/O™
3-26
Automation functions
Overview and selection tools
Overview of product details
Desigo™ Overall topology
3
One of the key benefits of Desigo™ is its seamless expansion capability, starting from the smallest system up to comprehensive and distributed large
systems.
Freely programmable automation stations
Desigo PX offers maximum flexibility with freely programmable automation stations
for primary plants. This way, building services plants can be optimally controlled and
monitored. Comprehensive system functions such as alarms, time scheduling and trend
data storage cover all the requirements associated with the operation of a building.
The distributed automation stations, available as modular and compact series, operate
autonomously.
Desigo PX excels in consistent openness of the system and the scalability of its freely
programmable automation stations and operator units, making cost-effective DDC
technology a possibility even in smaller HVAC systems. Whether for new buildings or
modernization projects, investment costs are limited to the system components that are
actually needed.
Maximum openness
The consistent and coordinated use of standards like BACnet, KNX, LonWorks or AMEV
emphasize the openness of Desigo for maximum overall efficiency. The native BACnet
automation stations offer a multifunctional integration platform used to connect thirdparty automation stations and open field-bus networks to the BACnet network. A few
decentralized, distributed third-party devices can be connected quickly and
cost-effectively via Desigo TX Open and processed in the automation system.
A range of graded operator units
Building users and facility managers benefit from a comprehensive range of touch
panels and operator units which can be used for targeted modification of comfort
conditions or of the whole plant.
Especially ergonomic finger operation of the PXM40 (10 inch) and PXM50 (15 inch)
Desigo Touch and Web permits complete operation of Desigo PX automation stations
via the BACnet/IP Web interface PXG3.W100.
3-2
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Automation functions
Overview and selection tools
Overview of product details
PX Automation stations and system controller overview
PX Automation station series
PX System controllers
modular
PXC50/100/200..D
compact
PXC..
PXC00/50/100/200..D
with PXX-L..
PXC00-U
with PXA30-K..
PXC00-U
with PXA30-RS
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
HMI Automation level
Desigo Touch and Web 1)
Web client (PX-WEB)
PXM20
PXM10
QAX3..
System functions (BACnet)
Alarms
Time schedules
Trend
I/O with value objects
Programming with D-MAP
Subsystem
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Bus for
I/O modules
Direct connection
via I/O
LONWORKS
technologie
Konnex
Modbus, M-Bus, ...
Additioinal functions
Grouping
1)
3
■
with BACnet/IP / Ethernet communication
Overview of inputs and outputs of compact PXC.. automation stations
BACnet / LONTALK
BACnet / IP
Number of I/Os complete
Universal inputs outputs, number
Digital inputs, number
Digital outputs, number
PXC12.D
PXC12-E.D
PXC22.D
PXC22-E.D
PXC36.D
PXC36-E.D
12
8
2
2
22
18
0
6
36
24
4
8
Desigo Touch and Web
Desigo Touch and Web permits convenient operation and monitoring of complex building-technical plants via touch panels as well
as standard Web browsers (HTML5-technology) on various hardware platforms (e.g. tablets, notebooks/PCs, smartphones). The Web
interface PXG3.W100 serves as a central access point for the operation of the automation level.
Operating functions
•
•
•
•
•
•
•
•
•
Graphical display of plants with intuitive operation
Object display and operation including all actual values and
setpoints, plant and operating states via dialogs
Graphical display and operation of scheduler programs, exception
calendar (in profile and list view)
Alarm monitoring with acknowledgement
Graphical display of offline trend data (trendlog objects)
Favorites for the most important plant data
Log on and off via Desigo user profile
Plant overview of the most important plant values, even
without log on
Display automatically adjusts to the size of the given client
Product overview
PXM40
Desigo touch panel with 10.1 inch screen diagonal
PXM50
PXG3.W100
Desigo touch panel with 15.6 inch screen diagonal
Web interface BACnet/ip
3-3
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Automation functions
Overview and selection tools
Overview of product details
Functions of PXA40... / PXA30... for the modular PX automation stations and system controllers
Modular
Modular
System Controller
PXC...D
PXC...-E.D
PXC00-U
Functions
PXA40-T PXA40-W0 PXA40-W1 PXA40-W2
PXA30-N
Ethernet interface RJ45
■
Modem connection
■
■
■
■
3
BACnet on Ethernet / IP
■
Generic PX Web
(ethernet or PPP)
Graphic PX Web
(ethernet or PPP)
Remote management
BACnet (PTP)
Remote management
PX Web (PPP)
Deliver alarms via SMS
over RS232
Deliver alarms via e-mail
over ethernet
■ 1)
■
■
■ 1)
■
■
2)
■
2)
■
■ 2)
■ 2)
■ 2)
■ 2)
■ 2)
■ 2)
■ 2)
■
■
■
2)
1)
For the connected automation station / system controller only
2)
The modern connection can be configured as follows:
- either for Remote management (PTP)
- or for remote management PX Web generic / graphic and Alarming via SMS
Overview TX-I/O™ module
range TXM1..
Type
Number of I/Os
Functionality
Local operation
LC-Display
3-colored I/O status LED
Green colored I/O status LED
TXM1.8D TXM1.16D TXM1.8U TXM1.8U-ML TXM1.8X TXM1.8X-ML TXM1.6R TXM1.6R-M TXM1.8P TXM1.6RL TXM1.8T
8
16
8
8
8
8
6
6
8
6
8
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Analog inputs (AI)
LG-Ni1000
Pt 1000 / 0...2500 Ohm
T1
DC O...10V
4...20 mA / 0...20 mA
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Analog outputs (AO)
DC 0...10 V
4...20 mA
■
■
Digital inputs (DI)
Message signal (open/closer)
Message impulse
Counter 10 Hz (with debouncing)
Counter 25 Hz (Bouncer free)
■
■
■
■
■
■
■
■
1-81)
■
■
5-8 2)
5-8 2)
Digital outputs (DO)
Continuous contact on/off
Continuous contact, 3-stage
3-stage output
Impulse on/off, 3-stage
Multistate
Triac-continuous contact
Triac-impulse (3-stage)
Triac-Pulsbreitenmodulation
Beleuchtungssteuerung, bistabil
■
■
■ 3)
■ 4)
■
■
■
■
■
■
■
■
■
■
■
■
■
■
All I/O points of a module are configurable on any, implemented functionality. The module TX1.OPEN enables the integration of Modbus, M-bus etc. via
RS232, 485 on the PXC50/100/200..D.
On the TXM1.16D the counters are implemented only on the inputs 1 to 8
On the TXM1.8X.. the current exists 4...20 mA are implemented only on the I/Os 5 to 8
3)
0...250 Ohm
4)
Pt100 4-wire
3-4
1)
2)
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Automation stations
Compact series PXC..
Automation station‚ compact series
PXC..D
Compact‚ freely programmable automation stations for HVAC and building services plant. The fixed data
point mix makes the automation stations ideal for commonly used applications with standard signals.
V Direct connection of field devices
V Management functions (alarm management‚ scheduler programs‚ trend functions‚ remote management‚ access protection‚ etc.)
V Standalone application or for use with linked system or devices
V Connection of the PXM.. operator unit
V Connection of QAX.. room units
V BTL tested BACnet communication on LonTalk‚ PTP or IP acoording to BACnet standard (rev 1.10)
include B-BC profile
V AMEV profiles AS-A and AS-B according to guide line 'BACnet 2011 - Version 1.1'
Data sheet
N9215
Communication
Bus: BACnet / LonTalk‚ PTP (point to point) or IP
Room unit: PPS2
Configurable software
7 mA
DC 20...25 V
Monostable‚ changeover contact
Universal inputs/outputs
Digital input‚ contact query
Relay outputs
3
Automation station with 12 data points and BACnet on LonTalk
PXC12.D
Fixed data point mix for 12 physical data points per automation station.
Data sheet
N9215
Operating voltage
Frequency
Power consumption
Communication
AC 24 V
50/60 Hz
24 VA
Bus: BACnet on LonTalk
Room unit: PPS2
8
2
2
272 x 150 x 62 mm
Universal inputs/outputs‚ number
Digital inputs‚ number
Digital outputs‚ number
Dimensions (W x H x D)
Stock No.
Product No.
BPZ:PXC12.D
PXC12.D
Automation station with 12 data points and BACnet on IP
PXC12-E.D
Fixed data point mix for 12 physical data points per automation station.
Data sheet
N9215
Operating voltage
Frequency
Power consumption
Communication
AC 24 V
50/60 Hz
24 VA
Bus: BACnet on IP
Room unit: PPS2
8
2
2
272 x 150 x 62 mm
Universal inputs/outputs‚ number
Digital inputs‚ number
Digital outputs‚ number
Dimensions (W x H x D)
Stock No.
Product No.
BPZ:PXC12-E.D
PXC12-E.D
3-5
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Automation stations
Compact series PXC..
PXC22.D
Automation station with 22 data points and BACnet on LonTalk
Fixed data point mix for 22 physical data points per automation station.
3
Data sheet
N9215
Operating voltage
Frequency
Power consumption
Communication
AC 24 V
50/60 Hz
26 VA
Bus: BACnet on LonTalk
Room unit: PPS2
16
6
272 x 150 x 62 mm
Universal inputs/outputs‚ number
Digital outputs‚ number
Dimensions (W x H x D)
PXC22-E.D
Stock No.
Product No.
BPZ:PXC22.D
PXC22.D
Automation station with 22 data points and BACnet on IP
Fixed data point mix for 22 physical data points per automation station.
Data sheet
N9215
Operating voltage
Frequency
Power consumption
Communication
AC 24 V
50/60 Hz
26 VA
Bus: BACnet on IP
Room unit: PPS2
16
6
272 x 150 x 62 mm
Universal inputs/outputs‚ number
Digital outputs‚ number
Dimensions (W x H x D)
PXC36.D
Stock No.
Product No.
BPZ:PXC22-E.D
PXC22-E.D
Automation station with 36 data points and BACnet on LonTalk
Fixed data point mix for 36 physical data points per automation station.
Data sheet
N9215
Operating voltage
Frequency
Power consumption
Communication
AC 24 V
50/60 Hz
35 VA
Bus: BACnet on LonTalk
Room unit: PPS2
24
4
8
293 x 176 x 77 mm
Universal inputs/outputs‚ number
Digital inputs‚ number
Digital outputs‚ number
Dimensions (W x H x D)
Stock No.
Product No.
BPZ:PXC36.D
PXC36.D
3-6
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Automation stations
Compact series PXC..
Automation station with 36 data points and BACnet on IP
PXC36-E.D
Fixed data point mix for 36 physical data points per automation station.
Data sheet
N9215
Operating voltage
Frequency
Power consumption
Communication
AC 24 V
50/60 Hz
35 VA
Bus: BACnet / IP
Room unit: PPS2
24
4
8
293 x 176 x 77 mm
Universal inputs/outputs‚ number
Digital inputs‚ number
Digital outputs‚ number
Dimensions (W x H x D)
3
Stock No.
Product No.
BPZ:PXC36-E.D
PXC36-E.D
3-7
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Automation stations
Modular series PXC..D
PXC50..D/PXC100..D/
PXC200..D
3
Automation stations‚ modular series PXC..D
The freely programmable modular series PXC..D automation stations with its free I/O configuration and
DIN compliant construction are optimized for panel assembly. It primarily controls and monitors larger
items of plant. The flexible TX-I/O modul product range for signaling‚ measuring‚ metering‚ switching
and positioning can be seamlessly connect to the automation station.
V Management functions (alarm management‚ time schedules‚ trend functions‚ remote management‚
access protection etc.)
V Standalone application or for use in the device or system network
V PXX-L11/12 for connecting RXC room controllers / LonWorks devices
V Connection of the PXM.. operator unit
V BTL tested BACnet communication on LonTalk‚ PTP or IP according to BACnet standard (rev 1.10) incl.
B-BC profile
V AMEV profiles AS-A and AS-B according to guide line 'BACnet 2011 - Version 1.1'
Data sheet
N9222
Operating voltage
Frequency
Degree of protection
Memory
AC 24 V
50/60 Hz
IP20
Flash: 32 MB
SDRAM: 64 MB
LON-bus: 78 kbps
Ethernet / IP: 10/100 MBit/s
4 years
192 x 74 x 96 mm
Rate of transmission
Battery life
Dimensions (W x H x D)
Range overview PXC50..D/PXC100..D/PXC200..D
Product Title
Communication
Data sheet
Stock No.
Product No.
Automation station BACBus: BACnet / LonTalk
net/LonTalk‚ with up to 52 data
points
N9222
S55372-C109
PXC50.D
Automation station BACnet/IP‚
with up to 52 data points
N9222
S55372-C110
PXC50-E.D
Automation station BACBus: BACnet / LonTalk
net/LonTalk‚ with up to 200 data
points
N9222
BPZ:PXC100.D
PXC100.D
Automation station BACnet/IP‚
with up to 200 data points
N9222
BPZ:PXC100-E.D
PXC100-E.D
Automation station BACBus: BACnet / LonTalk
net/LonTalk‚ with more than 200
data points
N9222
BPZ:PXC200.D
PXC200.D
Automation station BACnet/IP‚ Bus: BACnet / IP
with more than 200 data points
N9222
BPZ:PXC200-E.D
PXC200-E.D
Bus: BACnet / IP
Bus: BACnet / IP
Option modules PXA40..
PXA40-T
Option module with remote management via modem for automation stations
Option module for usage with modular automation stations PXC..D.
Data sheet
N9222
Communication
Degree of protection
Modem
IP20
Stock No.
Product No.
BPZ:PXA40-T
PXA40-T
3-8
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Automation stations
Modular series PXC..D
Option modules with web functions (PX Web) for modular automation stations
PXC..-E.D
PXA40-W..
Option modules for modular automation stations PXC..-E.D.
Data sheet
N9222
3
Range overview PXA40-W..
Product Title
Stock No.
Product No.
Option module with Web function (generic/graphic) for one automation station
BPZ:PXA40-W0
PXA40-W0
Option module with Web function (generic) for all automation stations in the BACnet net- BPZ:PXA40-W1
work
PXA40-W1
Option module with Web function (generic/graphic) for all automation stations in the BAC- BPZ:PXA40-W2
net network
PXA40-W2
Extension module for Integration of existing PTM I/O modules
PXX-PBUS
The PXX-PBUS extension module allows for integrating existing PTM I/O modules in Desigo.
The PXX-PBUS extension module‚ when combined with a modular series PXC..D automation station and
one or two TXS1.12F12 supply modules‚ replaces the UNIGYR and VISONIK process units as well as the
PXC64-U‚ PXC128-U automation stations.
V PTM I/O modules can continue to be used.
V Existing periphery can be assumed without a change.
V Control panel wiring can be assumed and need only be supplemented by new supply modules.
Data sheet
N9283
Stock No.
Product No.
S55842-Z107
PXX-PBUS
PXX-L11/12 for connecting RXC room controllers / LonWorks devices
Product Title
Data sheet
Stock No.
Product No.
Extension module for up to 60 LonWorks devices / RXC room
controllers
N9282
BPZ:PXX-L11
PXX-L11
N9282
BPZ:PXX-L12
PXX-L12
for system controller LonWorks PXC00.D/PXC00-E.D as well as
modular automation stations PXC..D/PXC..-E.D. When combined
with PXC100/200..D the number of devices / controllers is
reduced in relation to performance. For PXC50..D 10 devices /
controllers are permissible.
Extension module for up to 120 LonWorks devices / RXC room
controllers
for system controller LonWorks PXC00.D/PXC00-E.D as well as
modular automation stations PXC..D/PXC..-E.D. When combined
with PXC100/200..D the number of devices / controllers is
reduced in relation to performance. For PXC50..D 10 devices /
controllers are permissible.
3-9
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Automation stations
PX System controller
PXC00..D
System controllers for integration of Desigo RXC or third-party devices
The LonWorks system controller of this series allows you to connect LonWorks devices such as Desigo
RXC room controllers and third-party devices. Depending on the used expansion module the system controller connect up to 60 or 120 LonWorks devices / RXC room controllers.
V BTL tested BACnet communication on LonTalk‚ PTP or IP according to BACnet standard (rev 1.10) incl.
B-BC profile
V AMEV profiles AS-A and AS-B according to guide line 'BACnet 2011 - Version 1.1'
3
Data sheet
N9222
Operating voltage
Frequency
Degree of protection
Memory
AC 24 V
50/60 Hz
IP20
Flash: 32 MB
SDRAM: 64 MB
LON-bus: 78 kbps
Ethernet / IP: 10/100 MBit/s
4 years
192 x 74 x 96 mm
Rate of transmission
Battery life
Dimensions (W x H x D)
Range overview PXC00..D
Product Title
Communication
Data sheet
Stock No.
Product No.
System controller BACnet/LonTalk
Bus: BACnet / LonTalk
N9222
BPZ:PXC00.D
PXC00.D
System controller BACnet/IP
Bus: BACnet / IP
N9222
BPZ:PXC00-E.D
PXC00-E.D
Product Title
Data sheet
Stock No.
Product No.
Extension module for up to 60 LonWorks devices / RXC room
controllers
N9282
BPZ:PXX-L11
PXX-L11
N9282
BPZ:PXX-L12
PXX-L12
Product Title
Data sheet
Stock No.
Product No.
Option modules with web functions (PX Web) for modular automation stations PXC..-E.D
N9222
BPZ:PXA40-W..
PXA40-W..
Hardware for PXC00..D
for system controller LonWorks PXC00.D/PXC00-E.D as well as
modular automation stations PXC..D/PXC..-E.D. When combined
with PXC100/200..D the number of devices / controllers is
reduced in relation to performance. For PXC50..D 10 devices /
controllers are permissible.
Extension module for up to 120 LonWorks devices / RXC room
controllers
for system controller LonWorks PXC00.D/PXC00-E.D as well as
modular automation stations PXC..D/PXC..-E.D. When combined
with PXC100/200..D the number of devices / controllers is
reduced in relation to performance. For PXC50..D 10 devices /
controllers are permissible.
Option modules PXA40-W..
3-10
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Automation stations
Desigo™ PX Open
PX KNX system controller
PX KNX
Integration of room controllers from the Desigo RXB and Desigo RXL product range and from KNX thirdparty systems into the Desigo building automation and control system (interface functionality). Further
functions: Grouping of rooms and performance of higher level system functions.
V BTL tested BACnet communication on LonTalk or IP acoording to BACnet standard (rev 1.10) include
B-BC profile
V AMEV profiles AS-A and AS-B according to guide line 'BACnet 2011 - Version 1.1'
3
Functions
KNX data points are mapped to BACnet data points and vice versa. The PX KNX system controller performs the following major tasks:
V Compression of Desigo RXB/RXL room controller data and other KNX data points (e.g. room thermostats RDG/ RDF/ RDU) at the automation level
V Mapping of Desigo RXB/RXL and other KNX applications to BACnet for monitoring and operation purposes (grouped according to function:HVAC‚ lighting and blinds)
V Performance of higher level functions for room automation: Room and supply-related groups‚ system
functions such as changeover‚ summer/winter compensation‚ etc.
The RXB/RXL and KNX applications are mapped to the PX KNX system controller so that a room view is
created. This allows for the grouping of rooms‚ e.g. for shared occupancy schedules‚ lighting or blind
commands‚ etc
Hardware
Modular system controller PXC00-U with PXA30-K11 card.
V Without expansion module in the left slot the communication mode BACnet/LonTalk is activated.
V With the expansion module PXA30-N in the left slot the communication mode BACnet/IP is active.
Stock No.
Product No.
BPZ:PX KNX
PX KNX
Hardware for PX KNX
Product Title
Data sheet
Stock No.
Product No.
PX KNX S-mode card
N9280
BPZ:PXA30-K11
PXA30-K11
N9221
BPZ:PXC00-U
PXC00-U
Card for PX KNX automation station
System controller for the integration
PX M-bus system controller
PX M-Bus
M-bus datapoints are mapped to BACnet datapoints and vice-versa. The PX M-bus system controller performs the following major tasks.
V BTL tested BACnet communication on LonTalk or IP acoording to BACnet standard (rev 1.10) include
B-BC profile
V AMEV profiles AS-A and AS-B according to guide line 'BACnet 2011 - Version 1.1'
Functions
V Acquisition of consumption data and remote monitoring of max. 250 consumption meters and heat
meters
V Compression of consumption and heat meter data volume at the automation level
V Mapping of M-bus data to BACnet
V Trend objects for meter monitoring
Hardware
Modular system controller PXC00-U with PXA30-RS.. card.
V Without expansion module in the left slot the communication mode BACnet/LonTalk is activated.
V With the expansion module PXA30-N in the left slot the communication mode BACnet/IP is active.
Stock No.
Product No.
BPZ:PX M-Bus
PX M-Bus
3-11
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Automation stations
Desigo™ PX Open
Hardware for M-bus
3
Product Title
Data sheet
Stock No.
Product No.
Extension module for RS232 and RS485‚ up to 100 data points
N9281
BPZ:PXA30-RS
PXA30-RS
Extension module for RS232 and RS485‚ up to 400 data points
N9281
BPZ:PXA30-RS1
PXA30-RS1
Extension module for RS232 and RS485‚ up to 2000 data points
N9281
BPZ:PXA30-RS2
PXA30-RS2
System controller for the integration
N9221
BPZ:PXC00-U
PXC00-U
V Integration of third-party equipment and systems into the
Desigo building automation and control system at the automation level
V Plugs into the PXC00-U modular system controller
PX Modbus
PX Modbus system controller
The PX Modbus provides a platform for the integration of various third-party systems and devices. It
allows for the exchange of information with the Desigo building automation and control system at the
automation level.
V BTL tested BACnet communication on LonTalk or IP acoording to BACnet standard (rev 1.10) include
B-BC profile
V AMEV profiles AS-A and AS-B according to guide line 'BACnet 2011 - Version 1.1'
Functions
PX Modbus supports the following Modbus function codes and data formats:
V Function codes:01 ‚ 02 ‚ 03 ‚ 04 ‚ 05 ‚ 06 ‚ 15 ‚ 16.
V Data formats:
- 16-bit signed and unsigned integers
- 32-bit signed and unsigned integers
- 32-bit signed and unsigned 'Modulus-10000'
- Real 32-bit (IEEE floating point)
- ACM 16-bit
- BCD 16-bit and 32-bit
Master or slave
V The PX Modbus can be configured as either a master or slave. It supports up to 2000 third-party system data points
Hardware
Modular system controller PXC00-U with PXA30-RS.. card.
V Without expansion module in the left slot the communication mode BACnet/LonTalk is activated.
V With the expansion module PXA30-N in the left slot the communication mode BACnet/IP is active.
Stock No.
Product No.
BPZ:PX Modbus
PX Modbus
Hardware for PX Modbus
Product Title
Data sheet
Stock No.
Product No.
Extension module for RS232 and RS485‚ up to 100 data points
N9281
BPZ:PXA30-RS
PXA30-RS
Extension module for RS232 and RS485‚ up to 400 data points
N9281
BPZ:PXA30-RS1
PXA30-RS1
Extension module for RS232 and RS485‚ up to 2000 data points
N9281
BPZ:PXA30-RS2
PXA30-RS2
System controller for the integration
N9221
BPZ:PXC00-U
PXC00-U
V Integration of third-party equipment and systems into the
Desigo building automation and control system at the automation level
V Plugs into the PXC00-U modular system controller
3-12
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Automation stations
Desigo™ PX Open
Extension modules for PX Open with PXC..-U
Product Title
Data sheet
Stock No.
Product No.
Extension module for BACnet on Ethernet/IP
N9262
BPZ:PXA30-N
PXA30-N
3
3-13
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Automation stations
Desigo™ NET
PXG3..
BACnet router
The PXG3.. BACnet router connects a BACnet Ethernet/IP network (BACnet/IPv4 and BACnet/IPv6) to a
BACnet /LonTalk network (PXG3.L only)‚ and/or a BACnet/MS/TP channel. BACnet objects are simultaneously transmitted among any and all networks.
V Routing between BACnet MS/TP‚ BACnet/LonTalk (PXG3.L only)‚ and BACnet/IP
V Routing between BACnet/IPv4 and BACnet/IPv6
V Configuration with Desigo Xwork Plus
V LED indication
V 2-port Ethernet switch for low-cost cabling (10/100 baseT)
V BACnet MS/TP (RS-485) baud rates: 9600‚ 19200‚ 38400‚ 76800
3
Data sheet
N9270
Operating voltage
AC 24 V
DC 24 V
50/60 Hz
IP20
Frequency
Degree of protection
Range overview PXG3..
Product Title
Communication
Dimensions (W x H x D)
Stock No.
Product No.
BACnet router‚ BACnet Ether- BACnet / IP (BACnet/IPv4 and 162 x 74 x 90 mm
net/IP to BACnet/LonTalk or BACnet/IPv6)
BACnet/MS/TP
BACnet / LonTalk
BACnet / MS / TP
S55842-Z105-A100
PXG3.L
BACnet router‚ BACnet Ether- BACnet / IP (BACnet/IPv4 and 162 x 74 x 90 mm
net/IP to BACnet/MS/TP
BACnet/IPv6)
BACnet / MS / TP
S55842-Z106-A101
PXG3.M
Accessories for PXG3..
Product Title
Data sheet
Stock No.
Product No.
Bus terminator 52.3 Ohm for LonWorks bus
N3861
BPZ:RXZ01.1
RXZ01.1
Bus terminator 105 Ohm for LonWorks bus
N3861
BPZ:RXZ02.1
RXZ02.1
Connecting cable RJ45 - RHJ45‚ cable length 3 m
N9234
BPZ:PXA-C1
PXA-C1
Adapter RJ45 - RS232 at computer
N9234
BPZ:PXA-C2
PXA-C2
NEW PRODUCT
3-14
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Automation stations
Integral migration PXC-NRU..
Automation station for INTEGRAL migration‚ intgrates 64 data points in Desigo
PXC-NRUF
In existing INTEGRAL plants‚ you can replace compact automation units NRUE/A‚ NRUF/A and NRUT/A
with the PXC NRUF automation station.
Fixed data point mix for 64 physical data points per automation station UI=16‚ DI=24‚ DO=16‚ UO=8.
V BTL tested BACnet communication on LonTalk or PTP acoording to BACnet standard (rev 1.10) include
B-BC profile
V AMEV profiles AS-A and AS-B according to guide line 'BACnet 2011 - Version 1.1'
Data sheet
N9760
Operating voltage
Frequency
Power consumption
Communication
AC 24 V
50/60 Hz
26 VA
Bus: BACnet / LonTalk
Bus: BACnet / PTP (point to point)
Room unit: PPS2
265 x 295 x 100 mm
16
8
24
16
Dimensions (W x H x D)
Universal inputs‚ number
Universal outputs‚ number
Digital inputs‚ number
Digital outputs‚ number
3
Stock No.
Product No.
BPZ:PXC-NRUF
PXC-NRUF
Adapter plug-in circuit board for INTEGRAL NK modules‚ intgrates 48 data
points in Desigo
PXC-NRUD
This adapter‚ combined with an automation station PXC100..D‚ serves as a replacement for the modular
automation stations NRUA/A‚ NRUB/A‚ NRUC/A and NRUD/A.
Fixed data point mix for 48 physical data points per adapter DI=8‚ DO=8‚ UI/UO=32.
The adapter consists of a plug-in circuit board with front plate.
It is inserted into an existing card housing NHGB.
Data sheet
N9761
Operating voltage
Frequency
Power consumption
Communication
Universal inputs‚ number
Universal outputs‚ number
Digital inputs‚ number
Digital outputs‚ number
AC 24 V
50/60 Hz
18 VA
Bus: TX-I/O island bus to TXB1.PBUS
16
16
8
8
Stock No.
Product No.
BPZ:PXC-NRUD
PXC-NRUD
3-15
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Operator units
Operation and monitoring: PXM..
PXM50
15.6-inch touch panel
The Desigo PXM50 touch panel of Desigo Touch and Web is designed for control panel mounting. It is
used together with the web interface PXG3.W100 and adapts the standard technology used for the web
interface for local operation of the technical installations in the building. The touch panel allows for intuitive and efficient operation of multiple Desigo PXC..D/U automations stations (version 4 or higher) and
allows for permanent monitoring of technical installations in a building. TCP/IP is used for communications.
3
V
V
V
V
V
V
V
V
V
V
V
Compact design with low built-in depth‚ for mounting in control panel doors
High-resolution TFT display with 16.7 million colors. Resolution: 1366 x 768 pixels (wide screen)
Capacitive touch screen
Dimmable LED background lighting
Intuitive operation and monitoring of multiple plants or Desigo PX automation stations
Optimized for local operation of the Desigo building automation and control system
LED to indicate alarms while the screen is off
Connection via Ethernet RJ45
Commissioning wizard
Remote access via VNC to the touch panel
No additional mounting materials required
Data sheet
N9293
Operating voltage
AC 24 V
DC 24 V
50/60 Hz
13 W
26 VA
396.7 mm (15.6 ")‚ resolution: 1366 x 768 pixels
Ethernet IP
In control panel doors
In operating tablets
IP54 / IP20
0…50 °C
419 x 270 x 51.3 mm
Frequency
Power consumption
Display size
Interface type
Mounting
Degree of protection
Ambient temperature‚ operation
Dimensions (W x H x D)
Stock No.
Product No.
S55623-H120
PXM50
NEW PRODUCT
3-16
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Operator units
Operation and monitoring: PXM..
10.1-inch touch panel
PXM40
The Desigo PXM40 touch panel of Desigo Touch and Web is designed for control panel mounting. It is
used together with the web interface PXG3.W100 and adapts the standard technology used for the web
interface for local operation of the technical installations in the building. The touch panel allows for intuitive and efficient operation of multiple Desigo PXC..D/U automations stations (version 4 or higher) and
allows for permanent monitoring of technical installations in a building. TCP/IP is used for communications.
V
V
V
V
V
V
V
V
V
V
V
3
Compact design with low built-in depth‚ for mounting in control panel doors
High-resolution TFT display with 262 k colors. Resolution: 1280 x 800 pixels (wide screen)
Capacitive touch screen
Dimmable LED background lighting
Intuitive operation and monitoring of multiple plants or Desigo PX automation stations
Optimized for local operation of the Desigo building automation and control system
LED to indicate alarms while the screen is off
Connection via Ethernet RJ45
Commissioning wizard
Remote access via VNC to the touch panel
No additional mounting materials required
Data sheet
N9292
Operating voltage
AC 24 V
DC 24 V
50/60 Hz
7W
14 VA
256.4 mm (10.1 ")‚ resolution: 1280 x 800 pixels
Ethernet IP
In control panel doors
In operating tablets
IP54 / IP20
0…50 °C
289 x 198 x 51.3 mm
Frequency
Power consumption
Display size
Interface type
Mounting
Degree of protection
Ambient temperature‚ operation
Dimensions (W x H x D)
Stock No.
Product No.
S55623-H119
PXM40
Stock No.
Product No.
BPZ:PXA-H1
PXA-H1
Accessories for PXM..
Product Title
Data sheet
Multifunction cover blade for panel door or wall mount
Connecting cable RJ45 - RHJ45‚ cable length 3 m
N9234
BPZ:PXA-C1
PXA-C1
Adapter RJ45 - RS232 at computer
N9234
BPZ:PXA-C2
PXA-C2
Adapter from PXM20.. for firmware download
N9234
S55372-C108
PXA-C4
NEW PRODUCT3-17
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Operator units
Operation and monitoring: PXG3.W100
PXG3.W100
Web interface BACnet/IP for Desigo Touchpanels
The PXG3.W100 web interface serves as the central access point to operate the automation level. A central access point also allows for concurrent operation of different operator units while supporting connection of the Desigo touch panels PXM40 / PXM50 as well as providing access using devices featuring
a standard web browser (HTML5 technoligy) on varios hardware platforms. (e.g. tablets‚ notebook/PC‚
smartphones).
V Connection via Ethernet
V Central user interface for simultaneous access from various operator units
V Offline engineering using Xworks Plus
V Upload/download of configuration data via LAN‚ or Internet
V LED indication for Ethernet link and activity
V 2-port Ethernet switch for low-cost cabling (10/100baseT)
3
Data sheet
N9294
Operating voltage
AC 24 V
DC 24 V
50/60 Hz
IP20
162 x 109 x 77.5 mm
Frequency
Degree of protection
Dimensions (W x H x D)
Stock No.
Product No.
S55842-Z115
PXG3.W100
Accessories for PXG3.W100
Product Title
Data sheet
Stock No.
Product No.
Connecting cable RJ45 - RHJ45‚ cable length 3 m
N9234
BPZ:PXA-C1
PXA-C1
Adapter RJ45 - RS232 at computer
N9234
BPZ:PXA-C2
PXA-C2
NEW PRODUCT
3-18
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Operator units
Operation and monitoring: PXM..
Operator unit with BACnet on LonTalk
PXM20
The network-capable PXM20 operator unit allows for homogenous operation of a multitude of building
services plants at the automation level. The operator unit offers an operating keyboard and a high-resolution display for graphics and text. The PXM20 can be used on-site or remote for all plants connected
via a network. The operator unit can be integrated in a panel or plugged into a modular automation station of the PXC..-U series.
3
Operating functions
Transparently organized function and quick-access keys allow even casual users to expertly operate the
unit. The operator unit offers the following operator functions (among others):
V Easy-to-understand user instructions via the plant function
V Full access to all actual values‚ setpoints‚ plant and operating states‚ and parameters
V Complete data point operation and setpoint entry via clear text
V Optical and acoustic alarm indication.
V Alarm management with acknowledgement function and alarm memory
V Graphical display for scheduler program‚ exception day calendar‚ online trend heating curve
V Summary of all important values via Favorites
V Support of multi-level access protection
Data sheet
N9231
Operating voltage
AC 24 V
DC 12...40 V
50/60 Hz
4W
9 VA
Display area: 123 x 68 mm
No. of dots: 240 x 128 dots
LON-bus
RS 232-interface
In panel
On automation station PXC..-U
On DIN rail
IP40
0...50 °C
210 x 117 x 37 mm
Keypad with plastic membrane and pressure point
Frequency
Power consumption
Display size
Interface type
Mounting
Degree of protection
Ambient temperature‚ operation
Dimensions (W x H x D)
Keyboard
Stock No.
Product No.
BPZ:PXM20
PXM20
Operator unit with BACnet on IP
PXM20-E
Provides the same functionality as PXM20‚ but with BACnet/IP communication.
Data sheet
N9234
Stock No.
Product No.
BPZ:PXM20-E
PXM20-E
3-19
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Operator units
Operation and monitoring: PXM..
PXM10
Operator unit‚ local
The PXM10 operator unit allows for operating and monitoring a Desigo PX automation station. The unit
offers user-friendly single-button operation via a turn/press button and a high-quality display. The operator unit can be integrated in a panel or a modular automation station of the PXC..-U series.
Operating functions
V Display for setpoints and actual values‚ plant and operating states
V Setpoint adjustment
V Optical fault indication
V Alarm display with acknowledgement function
V Graphical display of scheduler programs
3
Data sheet
N9230
Operating voltage
AC 24 V
DC 12...40 V
0.7 W
1 VA
Display area: 82 x 42 mm
No. of dots: 128 x 64 dots
RS 232-interface
3m
IP40
0...50 °C
210 x 117 x 37 mm
0.350 kg
Power consumption
Display size
Interface type
Cable length
Degree of protection
Ambient temperature‚ operation
Dimensions (W x H x D)
Weight (incl. packaging)
Stock No.
Product No.
BPZ:PXM10
PXM10
Stock No.
Product No.
BPZ:PXA-H1
PXA-H1
Accessories for PXM..
Product Title
Data sheet
Multifunction cover blade for panel door or wall mount
Connecting cable RJ45 - RHJ45‚ cable length 3 m
N9234
BPZ:PXA-C1
PXA-C1
Adapter RJ45 - RS232 at computer
N9234
BPZ:PXA-C2
PXA-C2
Adapter from PXM20.. for firmware download
N9234
S55372-C108
PXA-C4
3-20
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Desigo TX-I/O
I/O modules TXM..
TX-I/O™ modules
TXM1..
Simple planning and executions:
V Slim‚ easy-to-understand I/O product range
V Highest flexibility for I/O point mix
Efficient panel construction:
V Small space requirements thanks to very compact construction
V DIN form eases panel construction using standard components
V Self-learning bus connections of the TX-I/O™ module with power supply
V Direct connection with interchange pins
Fast commissioning and service:
V Easiest possible addressing
V Fast servicing: plug-in I/O module exchange without tools or rewiring
V permute proof terminal bases
Operating voltage
Dimensions (W x H x D)
3
DC 22.5...26 V
64 x 77.5 x 98 mm
Easy-to-understand operation:
V Local priority operation as per VDI3814
V Simple display concept with LCD and colored LEDs
8 Digital Input Module
TXM1.8D
8 digital input‚ signaling per input with three-colored LED (green‚ yellow‚ red)‚ without local operation.
8 DI‚ individually configurable as:
- Message signal
- Message impulse with storage functions
- Counter impulse for up to a maximum of 10 Hertz
Data sheet
N8172
Operating voltage
Power consumption
Dimensions (W x H x D)
Weight
DC 22.5...26 V
1.1 W
64 x 77.5 x 98 mm
0.164 kg
Stock No.
Product No.
BPZ:TXM1.8D
TXM1.8D
16 Digital Input Module
TXM1.16D
16 digital input‚ signaling per input with green LED‚ without local operation.
16 DI‚ individually configurable as:
- Message signal
- Message impulse with storage functions
- 8 inputs as counter impulse for up to a maximum of 10 Hertz
Data sheet
N8172
Operating voltage
Power consumption
Dimensions (W x H x D)
Weight
DC 22.5...26 V
1.4 W
64 x 77.5 x 98 mm
0.199 kg
Stock No.
Product No.
BPZ:TXM1.16D
TXM1.16D
3-21
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Desigo TX-I/O
I/O modules TXM..
TXM1.6RL
6 Relay output module‚ bistable
6 outputs signaled with green LED‚ without local operation.
6 DO (volt-free‚ bistable)‚ individually configurable as:
- Configurable behavior in case of power failure and bus failure
- Switching voltage AC 24... 277 V
- Switching current max. 10 A (cos j = 0.8)
3
TXM1.6R
Data sheet
N8177
Operating voltage
Power consumption
Dimensions (W x H x D)
Weight
DC 22.5...26 V
0.8 W
64 x 77.5 x 98 mm
0.27 kg
Stock No.
Product No.
S55661-J103
TXM1.6RL
6 Relay output module
6 outputs signaled with green LED‚ without local operation.
6 DO (relay switch)‚ individually configurable as:
- Continuous or impulse contact
- Single-stage or multi-stage
- Three-point positioning output with internal stroke model
Hardware bolting device is by means of external wiring the two-way contacts.
TXM1.6R-M
Data sheet
N8175
Operating voltage
Power consumption
Dimensions (W x H x D)
Weight
DC 22.5...26 V
1.7 W
64 x 77.5 x 98 mm
0.231 kg
Stock No.
Product No.
BPZ:TXM1.6R
TXM1.6R
6 Relay output module with Override
6 outputs‚ signaling per output with three-colored LED (greed‚ yellow‚ red)‚ with local operation as per
ISO 16484.
6 DO (relay switch)‚ individually configurable as:
- Continuous or impulse contact
- Single-stage or multi-stage
- Three-point positioning output with internal stroke model
Hardware bolting device is by means of external wiring the two-way contacts.
Data sheet
N8175
Operating voltage
Power consumption
Dimensions (W x H x D)
Weight
DC 22.5...26 V
1.9 W
64 x 77.5 x 98 mm
0.241 kg
Stock No.
Product No.
BPZ:TXM1.6R-M
TXM1.6R-M
3-22
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Desigo TX-I/O
I/O modules TXM..
8 Resistance measuring input module
TXM1.8P
8 inputs with LED signal / fault display.
8 resistance measuring inputs with individual configuration of resistance or temperature measurement:
- Pt100 (4-wire)
- Pt1000‚ Ni1000
- Resistance 250 ohm or 2500 ohm (2-wire)
Data sheet
N8176
Operating voltage
Power consumption
Dimensions (W x H x D)
Weight
DC 22.5...26 V
1.2 W
64 x 77.5 x 98 mm
0.219 kg
3
Stock No.
Product No.
BPZ:TXM1.8P
TXM1.8P
8 Triac output module
TXM1.8T
8 Triac outputs‚ signaled with green LED.
8 AO‚ configurable for:
- Permanent contact
- Three-point positioning output with internal stroke model
- Pulsewidth-modulated output (PWM)
- Switching voltage AC 24 V
- Switching current AO 3-position: 250 mA / 6 VA per output
- Switching current AO PWM‚ BO: 125 mA / 3 VA per output
Data sheet
N8179
Operating voltage
Power consumption
Dimensions (W x H x D)
Weight
DC 22.5...26 V
1.0 W
64 x 77.5 x 98 mm
0.198 kg
Stock No.
Product No.
S55661-J106
TXM1.8T
8 Universal I/O Module
TXM1.8U
8 inputs/outputs signaled with green LED‚ without local operation
8 universal I/O points‚ individually configurable as:
- DI: Message signal‚ message impulse or counter impulse (25 Hertz)
- AI: Temperature sensor or DC 0...10 V
- AO: DC 0...10 V
Data sheet
N8173
Operating voltage
Power consumption
Dimensions (W x H x D)
Weight
DC 22.5...26 V
1.5 W
64 x 77.5 x 98 mm
0.179 kg
Stock No.
Product No.
BPZ:TXM1.8U
TXM1.8U
3-23
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Desigo TX-I/O
I/O modules TXM..
TXM1.8U-ML
8 Universal I/O Module‚ Override and LCD
8 inputs/outputs signaled with green LED‚ with local operation as per ISO 16484 with LCD signal display.
8 universal I/O points‚ individually configurable as:
- DI: Message signal‚ message impulse or counter impulse (25 Hertz)
- AI: Temperature sensor or DC 0...10 V
- AO: DC 0...10 V
3
TXM1.8X
Data sheet
N8173
Operating voltage
Power consumption
Dimensions (W x H x D)
Weight
DC 22.5...26 V
1.8 W
64 x 77.5 x 98 mm
0.202 kg
Stock No.
Product No.
BPZ:TXM1.8U-ML
TXM1.8U-ML
8 Universal I/O Module‚ 4-20mA‚
8 Inputs/outputs signaled with green LED‚ without local operation (same functionality as TXM1.8U‚ but
with current input/output).
8 universal I/O points‚ individually configurable as:
- DI: Message signal‚ message impulse (with storage function) or counter impulse (25 Hz)
- AI: Temperature sensor‚ DC 0...10 V‚ or 4...20 mA
- AO: DC 0...10 V‚ 4...20 mA (for 4 I/O points)
TXM1.8X-ML
Data sheet
N8174
Operating voltage
Power consumption
Dimensions (W x H x D)
Weight
DC 22.5...26 V
2.2 W
64 x 77.5 x 98 mm
0.194 kg
Stock No.
Product No.
BPZ:TXM1.8X
TXM1.8X
8 Universal I/O Module‚ 4-20mA‚ Override and LCD
8 Inputs/outputs signaled with green LED‚ with local operation as per ISO 16484 with LCD signal display
(same functionality as TXM1.8U-ML‚ but with current input/output).
8 universal I/O points‚ individually configurable as:
- DI: Message signal‚ message impulse (with storage function) or counter impulse (25 Hertz)
- AI: Temperature sensor‚ DC 0...10 V‚ or 4...20 mA
- AO: DC 0...10 V‚ 4...20 mA (for 4 I/O points)
Data sheet
N8174
Operating voltage
Power consumption
Dimensions (W x H x D)
Weight
DC 22.5...26 V
2.3 W
64 x 77.5 x 98 mm
0.211 kg
Stock No.
Product No.
BPZ:TXM1.8X-ML
TXM1.8X-ML
3-24
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Desigo TX-I/O
Desigo TX Open
TX Open RS232/485 module for integrating third-party systems and devices to
Desigo
TXI1.OPEN
RS232/485 module as platform to integrate third-party systems and devices to the Desigo building automation and control system via modular automation stations PXC..D (Version 4 or higher).
V With LED's to monitor operating and communication status
V USB interface for connecting the TX Open Tool
V Easy installation and setup
V Simple‚ fast diagnostics
V Suitable for operation using pre-defined applications for the following systems:
- Modbus
- M-Bus
- G120P
- Grundfos- and Wilo pumps
Data sheet
N8185
Operating voltage
Power consumption
Communication
DC 24 V
1.32 W
RS232
RS485
96 x 77.5 x 98 mm
0.168 kg
Dimensions (W x H x D)
Weight
3
Stock No.
Product No.
S55661-J100
TXI1.OPEN
3-25
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Desigo TX-I/O
Accessories Desigo TX-I/O
TXA1.IBE
Island bus expansion module for decentralized sub-islands with TX-I/O-modules
V
V
V
V
-
3
TXS1.12F10
Expand island bus to a distance of up to 2 x 200 meters
Compact design per DIN 43 880‚ requires little space
With LED to monitor communication status
Easy installation and setup:
Mounted on standard rails
Self-connecting bus (island bus) for the easiest possible installation
Plug-in screw terminals for island bus expansion
No programming / parameterization tool required
Data sheet
N8184
Dimensions (W x H x D)
Weight
32 x 77.5 x 98 mm
0.064 kg
Stock No.
Product No.
BPZ:TXA1.IBE
TXA1.IBE
TX-I/O Power Supply Modules 24 VDC Supply 1200 mA‚ 10 A Fuse
Up to 4 power supply modules can be operated in parallel
AC 24 Volt input
Generation / transfer of DC 24 V‚ 1.2A for the supply of TX-I/O modules and field devices
Fresh provision of AC 24 V for field device supply
Transfer of the bus signal
TXS1.EF10
Data sheet
N8183
Dimensions (W x H x D)
Weight
96 x 77.5 x 98 mm
0.309 kg
Stock No.
Product No.
BPZ:TXS1.12F10
TXS1.12F10
BUS Connection Module‚ 10A Fuse
Transfer of DC 24 V for the supply of TX-I/O modules and field devices
Fresh provision of AC / DC 12 … 24 V for field device supply
Transfer of the bus signal
Data sheet
N8183
Dimensions (W x H x D)
Weight
32 x 77.5 x 98 mm
0.082 kg
Stock No.
Product No.
BPZ:TXS1.EF10
TXS1.EF10
3-26
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Automation controls
Desigo TX-I/O
Accessories Desigo TX-I/O
P-bus interface module
TXB1.PBUS
V Interface between the automation station PXC64-U/PXC128-U and the bus of the TX-I/O modules
V Integrated DC 24 V‚ 1.2 A to supply power to TX-I/O modules and field devices
V USB port for tool connection
Data sheet
N8180
Dimensions (W x H x D)
Weight
128 x 77.5 x 98 mm
0.28 kg
3
Stock No.
Product No.
BPZ:TXB1.PBUS
TXB1.PBUS
Set of address plugs
Product Title
Data sheet
Stock No.
Product No.
Address Keys 1-12 + reset key
N8170
BPZ:TXA1.K12
TXA1.K12
Address Keys 1-24 + 2 reset keys
N8170
BPZ:TXA1.K24
TXA1.K24
Address keys 25-48 + 2 reset keys
N8170
BPZ:TXA1.K-48
TXA1.K-48
Address keys 49-72 + 2 reset keys
N8170
BPZ:TXA1.K-72
TXA1.K-72
Address keys 73-96 + 2 reset keys
N8170
S55661-J101
TXA1.K-96
Address keys 97-120 + 2 reset keys
N8170
S55661-J102
TXA1.K-120
Address key 5‚ 10 ... 120 + 2 reset keys
N8170
BPZ:TXA1.5K120
TXA1.5K120
Product Title
Data sheet
Stock No.
Product No.
Labels (sheet A4 with 9 labels)
N8170
BPZ:TXA1.LA4
TXA1.LA4
Spare transparent label holders (10 pcs.)
N8170
BPZ:TXA1.LH
TXA1.LH
Labeling material
3-27
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
4
Overview and selection tool
Desigo TRA
Desigo RX
Room operator units
Service unit
Product range overview
4-2
Desigo TRA Topology
4-4
RXL Application
4-6
RXB Application
4-8
RXC Application
4-10
Modular room automation stations PXC3..
4-15
I/O modules TXM..
4-16
Accessories Desigo TX-I/O™
4-19
Fan coil I/O block with KNX PL-Link
4-21
Pushbutton interface UP 220/31
4-23
Room unit with KNX PL-Link
4-24
Pushbutton with KNX PL-Link
4-29
Accessories for pushbutton with KNX PL-Link
4-33
Sensors with KNX PL-Link
4-35
VAV compact controller with KNX PL-Link
4-36
Communicating controllers - RXL (Bus)
4-37
Communicating controllers - RXB (KNX)
4-41
Communicating controllers - RXC (LonWorks)
4-45
For controllers RX.. (PPS2): QAX3.. / QAX8..
4-55
For controllers RX.. and room automation (BACnet) (EnOcean and wireless)
4-57
For communicating controller - RXC (LonWorks) QAX5..
4-60
For controller RXC..
4-61
Room automation
Overview and selection tools
Product range overview
Room Controller / Room automation station
Communication
Peripheral bus
4
Fan coil systems
2-pipe system with changeover
2-pipe system with changeover and electric air heater battery
4-pipe system
4-pipe system with electric air heater battery
4-pipe system with supply air temperature limit
2-pipe system with changeover and outside air damper
4-pipe system with outside air damper
2-pipe system and radiator
4-pipe system, with one air damper
Heated/chilled ceilings and radiators
Chilled ceiling with dewpoint monitoring
Chilled ceiling with dewpoint monitoring
Chilled ceiling and radiator
Chilled/heated ceiling, 2-pipe system with changeover
Chilled/heated ceiling, 4-pipe system and 2 ON / OFF
valves for changeover
Divided chilled/heated ceiling: Cooling only and cooling/
heating with changeover via LONWORKS bus
Radiator with downdraft compensation
Electric radiator
VAV systems
Single duct supply or extract air system
Single duct supply air system with reheater/cooler
Single duct supply air system with electric reheater
Single duct supply and extract air system
Single duct supply and extract air system with reheater/
cooler
Single duct supply and extract air system with electric
reheater
Single duct supply or exract air system with radiator
Single duct supply and extract air systems with radiator
Single duct supply and extract air system with electric
reheater
Single duct supply and extract air systems with radiator/
chilled ceiling
Fan powered box with electric reheater
Lighting
Manual/dimmable light control
Staircase lighting
Automatic operation with presence detector and/or
daylight sensor
Daylight dependent light control
Constant lighting control
Operating Hours
Shading
Manual Shading Control
Automatic Operation with
Glare protection
Heat protection
Scenes
Room OptiControl - Green Leaf
Thermal load analysis
Room Operating Modes (DIN EN 15500)
RXL..
RXB..
RXC1..
Bus
KNX
LONWORKS
BACnet
PPS2
PPS2
PPS2
KNX/DALI
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
RXC3..
RXC4..
■
■
■
PXC3..
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
RXC2..
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
4-2
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Overview and selection tools
Product range overview
Room units KNX
Features
AQR...
2570.. & 2576.. &
253..
253..
Display
Mode selection
Fan switch
Setpoint adjuster
■ 2)
Operation of light/blindes
■ 3)
Temperature sensor
Humidity sensor
Air quality sensor
Mounting
Flush-mounted
Directly on wall
Control panel(door)
Communication
Wireless
PPS2
LONWORKS
KNX
Controller
RXL..
RXB..
RXC..
PXC3..
QMX3..
P36
P30
■
P70
■ 2)
P34
P74
■
■
■
■
■
■
■
■
■
■
■
■
■
■ 4)
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
P37
■
■ 3)
■
P02
■
■
■
■
■
■
■
■
■
4
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Wireless-room units
QAX..
Features
Display
Mode selection
Fan switch
Setpoint adjuster
Temperature sensor
Mounting
Flush-mounted
Directly on wall
Control panel(door)
Communication
Wireless
EnOcean
PPS2
LONWORKS
KNX
Controller
RXL..
RXB..
RXC..
PXC3..
95.4
96.4
97.4
■
98.4
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■ 1)
■ 1)
■ 1)
■ 1)
■ 1)
■ 1)
■ 1)
■ 1)
■
■
■
■
■
■
■
■
■
■
■
■
1)
Suitable receivers: RXZ95.1/LON, RXZ97.1/KNX
2)
LED for air quality indicator
3)
Via 2 potential free inputs
4)
In combination with pushbutton UP2..
4-3
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Overview and selection tools
Product range overview
Room units LONWORKS/PPS2
QAX..
Features
4
Display
Mode selection
Fan switch
Setpoint adjuster
Operation of light/blindes
Temperature sensor
Humidity sensor
Air quality sensor
Mounting
Flush-mounted
Directly on wall
Control panel(door)
Communication
Wireless
PPS2
LONWORKS
KNX
Controller
RXL..
RXB..
RXC..
PXC3..
30.1
31.1
32.1
33.1
34.1
34.3
39.1
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
84.1
50..
51..
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
4-4
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Overview and selection tools
Product range overview
Desigo Total Room Automation topology
4
The total solution for the room
Desigo TRA (Total Room Automation) is used in buildings with multiple disciplines for room
automation (HVAC, lighting, blinds) all combined in one total solution. Desigo TRA offers solutions
with greater functionality and flexibility, allowing for energy-optimized plant operation without loss
of comfort (energy performance class A as per EN 15232). The programmable room automation
stations PXC3 communicate via BACnet/IP and offer integrated interfaces to the KNX and the DALI
bus as an option.
Room automation stations PCX3
The room automation stations of the PXC3 series can assume control for multiple rooms. They
communicate with each other or other system components via BACnet/IP. The room automation
stations have two Ethernet interfaces to allow for low-cost cabling via line topology (Daisy Chain).
TX-I/O modules connected directly to the PXC3 allow for direct connection of field devices. The
KNX connection enables room units, sensors and actuating devices to communicate with the room
automation station up to 500 m. Selected Siemens field devices support KNX PL-Link and can be
connected as field devices per plug-and-play to the bus. Desigo Tools parameterize them; KNX
commissioning software (ETS) is not required. Devices with KNX S-Mode can be integrated with the
help of ETS commissioning software.
The DALI bus is used for lighting control. Commercially available DALI-EVG electronic ballasts and
dimmers can be connected. The room automation stations are capable of powering TX-I/O modules, KNX and DALI bus. With TX-I/O modules and KNX connection, separate supplies can be added
as needed.
Programmable room automation
The PXC3 room automation station is programmable based on proven application blocks. Solutions
tailored to specific needs achieve maximum efficiency and comfort. A comprehensive block library
for room automation is provided as part the scope of delivery. The library contains predefined
application functions for room climate, lighting, shading, and superimposed room functions. They
can be combined to form individual solutions together with operating and display functions. The
individual application functions can be adapted to customer needs and are freely programmable.
The application functions do not depend on the selected field devices.
4-5
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Overview and selection tools
Product range overview
PCX3 Room automation stations overview
Max. numbers of rooms / room segments
System communication
4
PXC3.E72
PXC3.E72A
PXC3.E75
PXC3.E75A
4/8
BACnet / IP
4/8
BACnet / IP
8 / 16
BACnet / IP
8 / 16
BACnet / IP
■
■
■
■
■
■
■
■
■*
■*
■*
■*
■*
■*
■*
■*
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
HMI Automation level
Desigo Touch and Web and PX Web
PXM20
PXM10
QAX
QMX
Web based test and setuptool
System functions (BACnet)
Alarms
Time schedules
Trend
Programming
Peripheral bus
Bus for I/O module
KNX PL-Link1) / KNX S-Mode
DALI
Number of Input/Output for TX I/O Modulen
■
■
72
* In combination with PX System controller PXC00-E.D only
■
72
1)
200
200
Dedicated devices with KNX PL-Link
Overview I/O module TXM1..
Product
Number of Input/Output
Functionality
Local operation
LC-Display
3-colored I/O status LED
Green colored I/O status LED
Digital inputs (DI)
Message signal (open/closer)
Message impulse
Counter 25 Hz (Bouncer free)
Analog inputs (AI)
LG-Ni1000
Pt1000 / 0...2500 Ohm
T1
DC 0...10V
TXM1.8D
8
TXM1.16D
16
TXM1.8U
8
TXM1.6R
6
TXM1.6RL
6
TXM1.8RB
8
TXM1.8T
8
■
■
■
■
■
■
■
■
■
■
■
■
■ 1)
■
■
■
■
■
■
Analog outputs (AO)
DC 0...10V
Digital outputs (DO)
Continuous contact on/off
Continuous contact 3-stage
3-point output (stroke model)
Impulse on/off
Impulse
Impulse 3-stage
Bistable contact
Contact for control of blinds
Modulating (PWM)
■
■
■
■
■
■
■
■
■
■
■
■
All I/O points of a module are configurable on any, implemented functionality. The module TX1.OPEN enables the integration of Modbus, M-bus etc.
via RS232, 485 on the PXC50/100/200..D.
1)
On the TXM1.16D the counters are implemented only on the inputs 1 to 8
4-6
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Overview and selection tools
Product range overview
RXL applications
RXL – Powerful room controllers for temperature control in individual rooms
RXL ensures individual demand-based comfort in public buildings, offices, schools, hotels, etc. Flexible control of all types of equipment in individual rooms
calls for economical and convenient solutions that can be integrated into existing or new systems and will retain their compatibility long into the future.
Communicating controllers for individual rooms
The communicating room controllers RXL21.1, RXL22.1 and RXL24.1 are used for temperature control in individual rooms. RXL39.1 support energy efficient EC fan-coils. Siemens actuator and sensor technology can be connected.
Easy commissioning with room operator unit
Commissioning and parameter-setting for RXL controllers is carried out directly on the controller, with the QAX34.3 room operator unit. There is no need
for a network connection or a software tool. Mounting on a DIN rail is quick and simple.
User-friendly commissioning and service
The Service LED shows the operational status of the room controller at all times. For example, a flashing green LED is used to indicate normal, trouble-free
operation, a continuous red LED for addressing mode and a flashing red LED to indicate a fault. With the service pin, all controllers can be easily identified
for commissioning or maintenance purposes. As soon as the service pin is pressed, the red service LED on the controller lights up and the controller is displayed on a graphic of the building at the management station.
Complete range of standard room operating units
The extensive range of room operator units is available for direct operation and monitoring of setpoints and measured values in individual rooms. The range extends from very simple room temperature sensors to versatile room operator units with parameter-setting functions.
Connection to the Desigo building automation and control system
Desigo PX KNX allow for flexibly connecting RXL controllers to the Desigo building automation and control system, and hence acts as a gateway to BACnet.
The connection provides access to other functions such as time schedules and central control of setpoints.
RXL thus fits into the overall expandable modular system, and ensures long-term cost-efficiency.
Integration into Synco™
The Synco™ central control unit RMB795 is used for controlling and monitoring the RXL controllers in a Synco™ system.
HVAC
Chilled ceiling
Radiator-type
systems
Fan coil units
QAX30
QAX31
QAX32
QAX33
QAX34
QAX39
QAX84
RXL21.1
RXL22.1
RXL24.1
RXL39.1
Room units
Compact
4-7
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
4
Room automation
Overview and selection tools
Product range overview
Fields of application
The scope of RXL is defined by the preprogrammed application software. The following pages provide an overview of the options and the
corresponding devices. The devices are supplied preprogrammed with the applications. The required application can be selected by means of the
Handy tool QAX34.3.
Due to the fact that the applications are predefined, engineering simply involves the definition of a small number of parameters, e. g.:
■ ON / OFF or 3-point control of the valves and actuators
■ Temperature setpoints
■ Manual or automatic fan control
Fan coil systems
4
Application
FNC02
FNC03
FNC04
FNC05
FNC08
FNC10
FNC12
FNC18
FNC20
FNC02/03/04/08
Description
2-pipe system with changeover
2-pipe system with changeover and electrical reheater
4-pipe system
4-pipe system with electrical reheater
4-pipe system with supply air temperature limitation
2-pipe system with change over and outside air damper
4-pipe system with outside damper
2-pipe system with change over and radiator
4-pipe system with air-side control
2-pipe/4-pipe system with EC fan-coil support
Devices
RXL21.1/FC-10
RXL22.1/FC-12
RXL21.1/FC-10
RXL22.1/FC-12
RXL21.1/FC-10
RXL21.1/FC-11
RXL21.1/FC-11
RXL21.1/FC-11
RXL21.1/FC-10
RXL39.1/FC-13
Common functions
■ Window contact, occupancy detector, 4 operating modes
■ Manual fan control with room unit
■ Automatic fan control (RXL21.1/RXL22.1 three speed; RXL39.1 continous speed 0..10V)
■ Options for 2-pipe systems: heating only, cooling only or changeover
Controller
Heated/chilled ceilings and radiators
Application
CLC01
CLC02
RAD01
Description
Chilled ceiling with dewpoint monitoring
Chilled ceiling with dewpoint monitoring, radiator with
downdraft compensation
Radiator with downdraft compensation
Devices
RXL24.1/CC-02
RXL24.1/CC-02
RXL24.1/CC-02
Common functions
■ Window contact, occupancy detector, 4 operating modes
Controller
4-8
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Overview and selection tools
Product range overview
RXB applications
RXB hardware
The product range comprises compact controllers and corresponding room units for comfortable control. The compact room controllers are optimized to
the respective application with regard to input/output configuration. HVAC functions are operated via standard room units.
Communication is based on KNX S-mode. The fan coil room controllers communicate also in KNX LTE mode. KNX LTE mode is used for to communicate
with control equipment from the Synco™ 700 product range.
RXB software
Each RXB unit comes with preloaded application software featuring one or several applications (see next page).
The ETS software helps engineer and commission a network with RXB units.
In addition, the Synco™ tool… and room unit QAX34.3 by Siemens can be used for commissioning and
parameterization.
4
Connection to the Desigo building automation and control system
Desigo PX KNX allow for flexibly connecting RXB controllers to the Desigo building automation and control system, and hence acts as a gateway to BACnet.
The connection provides access to other functions such as time schedules and central control of setpoints.
RXB thus fits into the overall expandable modular system, and ensures long-term cost-efficiency.
Integration into Synco™
The Synco™ central control unit RMB795 is used for controlling and monitoring the RBX controllers in a Synco™ system.
HVAC
Chilled ceiling
Radiator-type
systems
KNX (S- and LTE-Mode)
Fan coil units
QAX30
QAX31
QAX32
QAX33
QAX34
QAX39
QAX84
QAX95
QAX96
QAX97
QAX98
AQR2531..
RXB21.1
RXB22.1
RXB24.1
RXB39.1
Room units
Compact
4-9
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Overview and selection tools
Product range overview
Fields of application
The scope of RXB is defined by the preprogrammed application software. The following pages provide an overview of the options and the
corresponding devices, divided into different areas of application. The devices are supplied preprogrammed with the applications. The required
application can be selected by means of the ETS, Synco™ tool or the Handy tool QAX34.3.
Due to the fact that the applications are predefined, engineering simply involves the definition of a small number of parameters, e. g.:
■ ON / OFF or 3-point control of the valves and actuators
■ Temperature setpoints
■ Manual or automatic fan control
Fan coil systems
4
Application
FNC02
FNC03
FNC04
FNC05
FNC08
FNC10
FNC12
FNC18
FNC20
FNC02/03/04/08
Description
2-pipe system with changeover
2-pipe system with changeover and electrical reheater
4-pipe system
4-pipe system with electrical reheater
4-pipe system with supply air temperature limitation
2-pipe system with changeover and outside air damper
4-pipe system with outside damper
2-pipe system with change over and radiator
4-pipe system with air-side control
2-pipe/4-pipe system with EC fan-coil support
Devices
RXB21.1/FC-10
RXB22.1/FC-12
RXB21.1/FC-10
RXB22.1/FC-12
RXB21.1/FC-10
RXB21.1/FC-11
RXB21.1/FC-11
RXB21.1/FC-11
RXB21.1/FC-10
RXB39.1/FC13
Common functions
■ Window contact, occupancy detector, 4 operating modes
■ Manual fan control with room unit
■ Automatic fan control (RXB21.1/RXB22.1 three speed; RXB39.1 continous speed 0..10V)
■ Options for 2-pipe systems: heating only, cooling only or change-over, via KNX bus
Controller
Heated/chilled ceilings and radiators
Application
CLC01
CLC02
RAD01
Description
Chilled ceiling with dewpoint monitoring
Chilled ceiling with dewpoint monitoring and radiator
Radiator with downdraft compensation
Devices
RXB24.1/CC-02
RXB24.1/CC-02
RXB24.1/CC-02
Common functions
■ Window contact, occupancy detector, 4 operating modes
Controller
4-10
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Overview and selection tools
Product range overview
RXC applications
RXC hardware
RXC is a comprehensive range of room controllers for HVAC automation, extension modules for lighting and blinds, and a graded range of
purposedesigned room units. LONWORKS technology is used for data communications.
The range consists of compact and modular room controllers, user-friendly room operator units and controllers in room-style housings.
RXC software
Each room controller contains downloadable application software (referred to as the “application“) with the optimum control programs for the room or
area concerned.
Siemens maintains a comprehensive library of reliable, field-proven applications for HVAC and electrical applications.
4
Connetion to the Desigo building automation and control system
Extension modules PXX-L.. together with the modular automation stations PXC..D allow for flexibly connecting RXC controllers to the Desigo building
automation and control system, and hence acts as a gateway to BACnet. The connection provides access to other functions such as time schedules and
central control of setpoints.
RXC thus fits into the overall expandable modular system, and ensures long-term cost-efficiency.
Electrical
HVAC
Lighting
Blinds
VAV
RXC32
RXC31
RXC40
RXC41
Chilled
ceiling
Radiator-type systems
RXC30
RXC40
RXC41
RXC10
Fan coil units
QAX30
QAX31
QAX32
QAX33
QAX34
QAX39
QAX84
QAX95
QAX96
QAX97
QAX98
RXC20
RXC21
RXC22
RXC39
QAX50
QAX51
Standard
Flexible
Room units
Compact
Controllers
in room-style
housing
Modular
Controllers
4-11
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Overview and selection tools
Product range overview
Fields of application
The scope of RXC is defined by the pre-programmed application software. The following pages provide an overview of the options and the corresponding devices, divided into different areas of application. The devices are supplied pre-programmed with the application required. Other applications can be loaded using the RXT10.3 commissioning and service tool, which contains the entire applications library.
Due to the fact that the applications are largely predefined, engineering simply involves the definition of a small number of parameters, e. g.:
■ ON / OFF or 3-point control of the valves and actuators
■ Temperature setpoints
■ Manual or automatic fan control
4
Basic applications
With the basic application software every RXC controller can also be used as an I/O module. The RXT10.3 commissioning and service tool can be used
to observe the signals to the inputs or to process them further at the automation level or at the management station. Direct control of the controller
outputs is also possible. Controllers ordered without reference to a specific application will be supplied factory-programmed with the appropriate basic
application.
Application
00010
00020
00021
00022
00030
00031
00032
Description
Basic application for RXC10.5
Basic application for RXC20.5
Basic application for RXC21.5
Basic application for RXC22.5
Basic application for RXC30.5
Basic application for RXC31.5
Basic application for RXC32.5
Fan coil systems
Application
FNC02
Description
2-pipe system with changeover
FNC03
2-pipe system with changeover and electric reheater
FNC04
FNC08
FNC10
FNC12
FNC18
FNC20
FNC02/03/04/08
4-pipe system
4-pipe system with supply air temperature limitation
2-pipe system with changeover and outside air damper
4-pipe system with outside air damper
2-pipe system (cooling) and radiator
4-pipe system with air-side control
2-pipe/4-pipe system with EC fan-coil support
Devices
RXC20.5 / RXC21.5
RXC20.5 / RXC21.5 /
RXC22.5
RXC20.5 / RXC21.5
RXC21.5
RXC21.5
RXC21.5
RXC20.5 / RXC21.5
RXC20.5 / RXC21.5
RXC39.5
Common functions
■ Window contact, occupancy detector, 4 operating modes
Controller
■ Manual fan control with room unit
■ Automatic fan control (RXC20.5 single-speed, RXC21.5, RXC21.5 three-speed), 0..10 V (continious speed with RXC39.5 only)
■ Options for 2-pipe systems: heating only, cooling only or change-over, via LONWORKS bus
Heated/chilled ceilings and radiators
Application
CLC01
CLC02
CLC03
Description
Chilled ceiling
Chilled ceiling and radiator
Chilled ceiling and radiator
Devices
RXC20.5 / RXC10.5
RXC20.5 / RXC10.5
RXC20.5
CLC06
Chilled/heated ceiling, 2-pipe system with changeover via
LONWORKS bus
RXC20.5 / RXC10.5
CLC07
Chilled/heated ceiling, 2-pipe system with changeover via
LONWORKS bus and radiator
RXC20.5
CLC08
Chilled/heated ceiling, 4-pipe system and 2 ON / OFF valves
for changeover
RXC21.5
CLC09
Divided chilled/heated ceiling: Cooling only and cooling/
heating with changeover via LONWORKS bus
RXC20.5 / RXC21.5
RAD01
RAD03
LPHW radiators
Electric radiators
RXC20.5 / RXC10.5
RXC20.5 / RXC10.5
Controller
Common functions
■ Window contact, occupancy detector, 4 operating modes
■ Dewpoint sensor
4-12
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Overview and selection tools
Product range overview
VAV systems
Application
VAV01
VAV02
VAV03
VAV04
VAV05
VAV06
VAV07
VAV08
VAV10
Description
Single duct supply or extract air system
Single duct supply air system with reheater/cooler
Single duct supply air system with electric reheater
Single duct supply and extract air system
Single duct supply and extract air system with reheater/cooler
Single duct supply and extract air system with electric reheater
Single duct supply or extract air system with radiator
Single duct supply and extract air systems with radiator
Single duct supply and extract air system with electric reheater
Devices
RXC10.5 / RXC32.5
RXC32.5
RXC32.5
RXC31.5
RXC31.5
RXC31.5
RXC10.5
RXC31.5
RXC31.5
VAV14
Single duct supply and extract air systems with radiator/
chilled ceiling
RXC31.5
FPB05
Fan powered single duct supply air system with electric
reheater
RXC31.5
4
Controller
Common functions
■ Window contact, occupancy detector, 4 operating modes
■ Built-in pressure sensor (RXC32.5)
■ DC 0…10 V inputs for external pressure sensors (RXC31.5)
■ Control of compact volume controllers with DC 0…10 V (RXC10.5, RXC32.5)
■ Direct control of damper actuators (RXC31.5, RXC32.5)
Combined applications
The HVAC applications covered by the RXC30.5 and RXC31.5 basic modules combine lighting and blind control (extension modules RXC40.5 and
RXC41.5).
The combined applications consist of an HVAC application with one or more electrical functions.
Application
HVAC
Electrical function
Application
Group of
Group of
lights
lights
ON / OFF 1) dimmed
INT01
INT02
INT03
INT04
INT05
INT06
INT07
INT10
INT11
INT12
INT15
INT17
CLC02 3)
CLC02 3)
CLC02 3)
CLC02 3)
CLC02 3)
CLC02 3)
CLC02 3)
VAV08 4)
VAV08 4)
VAV08 4)
VAV08 4)
VAV08 4)
2x
4x
2x
2x
2x
4x
2x
2x
4x
Equipment
Blinds
RXC30.5 RXC31.5 RXC40.5 RXC41.5
up / down 2)
2x
2x
2x
4x
2x
2x
1
1
1
1
1
1
1
2x
2x
2x
2x
1)
With or without daylight sensor via LONWORKS bus, as required
2)
With or without slat adjustment, as required
3)
CLC02: Chilled ceiling and radiator
4)
VAV08: Single duct supply and extract air systems, see VAV systems above
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
Controller + Extension modules
1
1
4-13
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Notes
4
4-14
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Modular room automation stations PXC3..
Room automation stations
PXC3.E..
Modular‚ freely programmable room automation station for HVAC‚ lighting and shading (TRA‚ Total
Room Automation):
V BTL tested BACnet/IP communication acoording to BACnet standard (rev 1.10) include B-ASC profile
V Island bus to connect TX-I/O modules with any data point mix (including bus supply)
V KNX bus for direct connection of peripheral devices using KNX PL-Link or KNX S-mode communication
(including bus supply)
V DALI bus to connect lighting controls (only controller types PXC3...A)
V USB interface for tool
V Mounting on standard mounting rail
V 2-port Ethernet switch for low-cost cabling
Data sheet
N9203
Operating voltage
Frequency
Degree of protection
Dimensions (W x H x D)
AC 24 V
50/60 Hz
IP20
162 x 74 x 90 mm
4
Range overview PXC3.E..
Product Title
Communication
Data sheet
Stock No.
Product No.
Room automation station BAC- BACnet / IP
net / IP‚ with up to 4 rooms / 8 KNX PL-Link / S-Mode
room segments
Island bus
N9203
S55376-C100
PXC3.E72
Room automation station BAC- BACnet / IP
net / IP und DALI‚ with up to 4 KNX PL-Link / S-Mode
DALI
rooms / 8 room segments
Island bus
N9203
S55376-C101
PXC3.E72A
Room automation station BAC- BACnet / IP
net / IP‚ with up to 8 rooms / 16 KNX PL-Link / S-Mode
room segments
Island bus
N9203
S55376-C102
PXC3.E75
Room automation station BAC- BACnet / IP
net / IP und DALI‚ with up to 8 KNX PL-Link / S-Mode
DALI
rooms / 16 room segments
Island bus
N9203
S55376-C103
PXC3.E75A
4-15
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
I/O modules TXM..
TXM1..
TX-I/O™ modules
Simple planning and executions:
V Slim‚ easy-to-understand I/O product range
V Highest flexibility for I/O point mix
Efficient panel construction:
V Small space requirements thanks to very compact construction
V DIN form eases panel construction using standard components
V Self-learning bus connections of the TX-I/O™ module with power supply
V Direct connection with interchange pins
Fast commissioning and service:
V Easiest possible addressing
V Fast servicing: plug-in I/O module exchange without tools or rewiring
V permute proof terminal bases
4
Operating voltage
Dimensions (W x H x D)
TXM1.6RL
DC 22.5...26 V
64 x 77.5 x 98 mm
6 Relay output module‚ bistable
6 outputs signaled with green LED‚ without local operation.
6 DO (volt-free‚ bistable)‚ individually configurable as:
- Configurable behavior in case of power failure and bus failure
- Switching voltage AC 24... 277 V
- Switching current max. 10 A (cos j = 0.8)
TXM1.6R
Data sheet
N8177
Operating voltage
Power consumption
Dimensions (W x H x D)
DC 22.5...26 V
0.8 W
64 x 77.5 x 98 mm
Stock No.
Product No.
S55661-J103
TXM1.6RL
6 Relay output module
6 outputs signaled with green LED‚ without local operation.
6 DO (relay switch)‚ individually configurable as:
- Continuous or impulse contact
- Single-stage or multi-stage
- Three-point positioning output with internal stroke model
Hardware bolting device is by means of external wiring the two-way contacts.
Data sheet
N8175
Operating voltage
Power consumption
Dimensions (W x H x D)
Weight
DC 22.5...26 V
1.7 W
64 x 77.5 x 98 mm
0.231 kg
Stock No.
Product No.
BPZ:TXM1.6R
TXM1.6R
4-16
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
I/O modules TXM..
8 Digital Input Module
TXM1.8D
8 digital input‚ signaling per input with three-colored LED (green‚ yellow‚ red)‚ without local operation.
8 DI‚ individually configurable as:
- Message signal
- Message impulse with storage functions
- Counter impulse for up to a maximum of 10 Hertz
Data sheet
N8172
Operating voltage
Power consumption
Dimensions (W x H x D)
Weight
DC 22.5...26 V
1.1 W
64 x 77.5 x 98 mm
0.164 kg
4
Stock No.
Product No.
BPZ:TXM1.8D
TXM1.8D
8 Relay output module for blinds control
TXM1.8RB
8 relay outputs for blinds control‚ signaled with green LED‚ without local operation.
8 DO (non-floating):
- 4 blinds motors with 2 end switches
- 2 blinds motors with 3 end switches
- 2 blinds motors with 2 end switches + 1 blinds motor with 3 end switches
- Current measurement for each blinds motor
- Switching voltage AC 100... 250 V
- Switching current max. 3 A (motor)
Data sheet
N8178
Operating voltage
Power consumption
Dimensions (W x H x D)
DC 22.5...26 V
1.4 W
64 x 77.5 x 98 mm
Stock No.
Product No.
S55661-J105
TXM1.8RB
8 Triac output module
TXM1.8T
8 Triac outputs‚ signaled with green LED.
8 AO‚ configurable for:
- Permanent contact
- Three-point positioning output with internal stroke model
- Pulsewidth-modulated output (PWM)
- Switching voltage AC 24 V
- Switching current AO 3-position: 250 mA / 6 VA per output
- Switching current AO PWM‚ BO: 125 mA / 3 VA per output
Data sheet
N8179
Operating voltage
Power consumption
Dimensions (W x H x D)
DC 22.5...26 V
1.0 W
64 x 77.5 x 98 mm
Stock No.
Product No.
S55661-J106
TXM1.8T
4-17
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
I/O modules TXM..
TXM1.16D
16 Digital Input Module
16 digital input‚ signaling per input with green LED‚ without local operation.
16 DI‚ individually configurable as:
- Message signal
- Message impulse with storage functions
- 8 inputs as counter impulse for up to a maximum of 10 Hertz
4
TXM1.8U
Data sheet
N8172
Operating voltage
Power consumption
Dimensions (W x H x D)
Weight
DC 22.5...26 V
1.4 W
64 x 77.5 x 98 mm
0.199 kg
Stock No.
Product No.
BPZ:TXM1.16D
TXM1.16D
8 Universal I/O Module
8 inputs/outputs signaled with green LED‚ without local operation
8 universal I/O points‚ individually configurable as:
- DI: Message signal‚ message impulse or counter impulse (25 Hertz)
- AI: Temperature sensor or DC 0...10 V
- AO: DC 0...10 V
Data sheet
N8173
Operating voltage
Power consumption
Dimensions (W x H x D)
Weight
DC 22.5...26 V
1.5 W
64 x 77.5 x 98 mm
0.179 kg
Stock No.
Product No.
BPZ:TXM1.8U
TXM1.8U
4-18
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Accessories Desigo TX-I/O
Island bus expansion module for decentralized sub-islands with TX-I/O-modules
V
V
V
V
-
TXA1.IBE
Expand island bus to a distance of up to 2 x 200 meters
Compact design per DIN 43 880‚ requires little space
With LED to monitor communication status
Easy installation and setup:
Mounted on standard rails
Self-connecting bus (island bus) for the easiest possible installation
Plug-in screw terminals for island bus expansion
No programming / parameterization tool required
Data sheet
N8184
Dimensions (W x H x D)
Weight
32 x 77.5 x 98 mm
0.064 kg
4
Stock No.
Product No.
BPZ:TXA1.IBE
TXA1.IBE
TX-I/O Power Supply Modules 24 VDC Supply 1200 mA‚ 10 A Fuse
TXS1.12F10
Up to 4 power supply modules can be operated in parallel
AC 24 Volt input
Generation / transfer of DC 24 V‚ 1.2A for the supply of TX-I/O modules and field devices
Fresh provision of AC 24 V for field device supply
Transfer of the bus signal
Data sheet
N8183
Dimensions (W x H x D)
Weight
96 x 77.5 x 98 mm
0.309 kg
Stock No.
Product No.
BPZ:TXS1.12F10
TXS1.12F10
BUS Connection Module‚ 10A Fuse
TXS1.EF10
Transfer of DC 24 V for the supply of TX-I/O modules and field devices
Fresh provision of AC / DC 12 … 24 V for field device supply
Transfer of the bus signal
Data sheet
N8183
Dimensions (W x H x D)
Weight
32 x 77.5 x 98 mm
0.082 kg
Stock No.
Product No.
BPZ:TXS1.EF10
TXS1.EF10
4-19
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Accessories Desigo TX-I/O
Set of address plugs
4
Product Title
Data sheet
Stock No.
Product No.
Address Keys 1-12 + reset key
N8170
BPZ:TXA1.K12
TXA1.K12
Address Keys 1-24 + 2 reset keys
N8170
BPZ:TXA1.K24
TXA1.K24
Address keys 25-48 + 2 reset keys
N8170
BPZ:TXA1.K-48
TXA1.K-48
Address keys 49-72 + 2 reset keys
N8170
BPZ:TXA1.K-72
TXA1.K-72
Address keys 73-96 + 2 reset keys
N8170
S55661-J101
TXA1.K-96
Address keys 97-120 + 2 reset keys
N8170
S55661-J102
TXA1.K-120
Address key 5‚ 10 ... 120 + 2 reset keys
N8170
BPZ:TXA1.5K120
TXA1.5K120
Product Title
Data sheet
Stock No.
Product No.
Labels (sheet A4 with 9 labels)
N8170
BPZ:TXA1.LA4
TXA1.LA4
Spare transparent label holders (10 pcs.)
N8170
BPZ:TXA1.LH
TXA1.LH
Labeling material
4-20
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Fan coil I/O block with KNX PL-Link
KNX PL-Link I/O block for use with a PXC3.. series room automation station
RXM21.1
The KNX PL-Link I/O block RXM21.1 contains the inputs and outputs required by a PXC3 series room automation station for a Fancoil application.
- KNX PL-Link bus communication
- Valve control (3 potential-free relay contacts)
- Thermal valve actuator control (AC 24 V)
- Motor-driven valve and damper actuators (AC 24 V‚ 2- or 3-point)
- Pluggable screw terminals
Data sheet
N3835
Operating voltage
Frequency
Power consumption
Digital inputs‚ number
Analog inputs‚ number
Triac outputs‚ number
Triac outputs
Triac output‚ switching voltage
Triac output‚ switching current
Relay outputs‚ number
Relay output‚ switching voltage
Relay output‚ switching current
Degree of protection
Communication
Mounting
Dimensions (W x H x D)
AC 230 V
50/60 Hz
12 VA
2
1
4
ON/OFF
AC 24 V
0.5 A
3
AC 250 V
5 (4) A
IP20
KNX PL-Link
On DIN rail
113 x 167 x 62 mm
4
Stock No.
Product No.
S55376-C104
RXM21.1
4-21
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Fan coil I/O block with KNX PL-Link
RXM39.1
KNX PL-Link I/O block for use with a PXC3.. series room automation station
The KNX PL-Link I/O block RXM39.1 contains the inputs and outputs required by a PXC3 series room automation station for a fan-coil application.
- KNX PL-Link bus communication
- Fan control (ECM fan‚ DC 0...10 V)
- Actuator control DC 0...10 V
- Electric heating control DC 0...10 V
- Potential-free relay contacts to release fan and electric heating
- Plug-in screw terminals
4
Data sheet
N3836
Operating voltage
Frequency
Power consumption
Digital inputs‚ number
Analog inputs‚ number
Analog outputs‚ number
Analog output‚ signal
Relay outputs‚ number
Electric reheater relay
Relay output‚ switching voltage
Relay output‚ switching current
Degree of protection
Communication
Mounting
Dimensions (W x H x D)
AC 230 V
50/60 Hz
12 VA
4
2
3
DC 0...10 V
1
1
AC 250 V
5 (4) A
IP20
KNX PL-Link
On DIN rail
152 x 120 x 62 mm
Stock No.
Product No.
S55376-C105
RXM39.1
4-22
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Pushbutton interface UP 220/31
Pushbutton interface‚ 4 x potential-free contact‚ output for LED control
UP 220D31
Pushbutton interface:
V with 4 inputs / outputs each configurable for potential-free contacts or for control of an LED (max 2
mA)
V with integrated bus coupling unit‚ bus connection via bus terminal
V for insertion in flush-mounting switch and socket boxes 60 mm in diameter and 40 mm deep
Communication
Dimensions (W x H x D)
KNX S-Mode
KNX PL-Link
42 x 42 x 8.5 mm
Stock No.
Product No.
5WG1220-2DB31
UP 220D31
4
4-23
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Room unit with KNX PL-Link
QMX3..
Room sensor and unit for KNX PL-Link‚ freely configurable‚ flush-mounted
The flush-mounted room unit QMX3.. consists of:
- Operator unit
- Bezel‚ titanium white
- Base plate and KNX plug.
Functionality:
V Freely configurable user interface (keys and visual items) as part of Total Room Automation
V RoomOptiControl energy efficiency function
V Room temperature measurement
V Display of room temperature‚ control mode‚ scenes etc. (dot matrix LCD)
V Backlit display‚ white or blue selection
V KNX PL-Link interface to the room automation station with plug & play functionality
V Can be combined with different standard and design bezels
4
Data sheet
N1601
Measuring range‚ temperature
Sensing element‚ temperature
Degree of protection
Mounting
Dimensions (W x H x D)
0…50 °C
NTC
IP30
Flush or wall-mounted conduit box
55 x 55 x 38 mm
Range overview QMX3..
Product Title
Stock No.
Product No.
Room unit for KNX PL-Link‚ freely configurable‚ flush-mounted with square bezel
S55624-H100
QMX3.P36F
Room unit for KNX PL-Link‚ freely configurable‚ flush-mounted with landscape bezel (3
modules landscape)
S55624-H101
QMX3.P36G
AQR2570..
Base module with KNX for temperature and humidity measurement
Data sheet
N1411
Voltage supply
Communication
KNX bus
KNX S-mode
KNX LTE-mode
KNX PL-Link
Passive temperature sensor NTC 10k
1
Potential-free contacts
2
Bus connection: spring terminal
sensor inputs: 4 screw terminals
Analog inputs
Analog inputs‚ number
Digital inputs
Digital inputs‚ number
Connection‚ electrical
Range overview AQR2570..
Mechanical design
Dimensions (W x H)
Stock No.
Product No.
EU (CEE/VDE)
70.8 x 70.8 mm
S55720-S203
AQR2570NF
UK (British Standard)
83 x 83 mm
S55720-S204
AQR2570NH
IT (3 Modular)
110 x 64 mm
S55720-S205
AQR2570NG
US (UL)
64 x 110 mm
S55720-S206
AQR2570NJ
4-24
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Room unit with KNX PL-Link
Base modules with KNX for CO2 measurement
Data sheet
N1411
Voltage supply
Communication
KNX bus
KNX S-mode
KNX LTE-mode
KNX PL-Link
Passive temperature sensor NTC 10k
1
Potential-free contacts
2
CO2: 0...5000 ppm
Bus connection: spring terminal
sensor inputs: 4 screw terminals
Analog inputs
Analog inputs‚ number
Digital inputs
Digital inputs‚ number
Measuring range
Connection‚ electrical
AQR2576..
4
Range overview AQR2576..
Mechanical design
Dimensions (W x H)
Stock No.
Product No.
EU (CEE/VDE)
70.8 x 70.8 mm
S55720-S207
AQR2576NF
UK (British Standard)
83 x 83 mm
S55720-S208
AQR2576NH
IT (3 Modular)
110 x 64 mm
S55720-S209
AQR2576NG
US (UL)
64 x 110 mm
S55720-S210
AQR2576NJ
Front modules for base modules
Data sheet
N1410
Color
Degree of protection
Dimensions (W x H)
Titanium white
IP30
55 x 55 mm
AQR253..
Range overview AQR253..
Measuring range‚ temperature
Signal output temperature
0…50 °C
Active
0…50 °C
0…50 °C
Active
Active
Measurement range humidi- Stock No.
ty
Product No.
S55720-S136
AQR2532NNW
0…100 %
S55720-S140
AQR2533NNW
0…100 %
S55720-S141
AQR2535NNW
S55720-S137
AQR2530NNW
S55720-S219
AQR2535NNWQ
0…100 %
4-25
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Room unit with KNX PL-Link
QMX3..
Wall-mounted room sensors and operator units for KNX
The wall-mounted room unit QMX3.. consists of:
- Base plate
- Sensor or room operator unit
The following functions are (depending on type):
V Temperature sensor or multisensor (T‚ r.h.‚ CO2)
V Backlit display or LED display
V Touchkeys
V Switching and control of lighting‚ blinds‚ scenes
4
Data sheet
N1602
Measuring range‚ temperature
Sensing element‚ temperature
Degree of protection
Mounting
Communication
0...50 °C
NTC
IP30
Wall-mounting
KNX PL-Link
KNX S-Mode
88.4 x 133.4 x 18 mm
Dimensions (W x H x D)
QMX3.P30
Room sensor KNX for temperature
Functions:
V Temperature sensor
QMX3.P70
Stock No.
Product No.
S55624-H103
QMX3.P30
Room sensor KNX for temperature‚ humidity‚ CO2
Functions:
V multisensor for temperature‚ humidity and CO2
V Air quality indicator with LED
Stock No.
Product No.
S55624-H104
QMX3.P70
NEW PRODUCT
4-26
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Room unit with KNX PL-Link
Room operator unit KNX with temperature sensor‚ segmented backlit display‚
touchkeys
QMX3.P34
Functions:
V Temperature sensor
V Segmented backlit display and touchkeys
V "Green Leaf" LED
Stock No.
Product No.
S55624-H105
QMX3.P34
Room operator unit KNX with sensors for temperature‚ humidity‚ CO2‚ segmented backlit display‚ touchkeys
4
QMX3.P74
Functions:
V multisensor for temperature‚ humidity and CO2
V Segmented backlit display and touchkeys
V "Green Leaf" LED
Stock No.
Product No.
S55624-H106
QMX3.P74
Room operator unit KNX with temperature sensor‚ configurable touchkeys‚
LED display
QMX3.P02
Functions:
V Temperature sensor
V Configurable touchkeys with LED display
V Switching and control of lighting‚ blinds‚ scenes
V Window for labels
Stock No.
Product No.
S55624-H107
QMX3.P02
NEW PRODUCT4-27
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Room unit with KNX PL-Link
QMX3.P37
Room operator unit KNX with temperature sensor‚ segmented backlit display‚
configurable touchkeys‚ LED display
Functions:
V Temperature sensor
V Segmented backlit display and touchkeys
V Configurable touchkeys with LED display
V Switching and control of lighting‚ blinds‚ scenes
V Window for labels
V "Green Leaf" LED
4
Stock No.
Product No.
S55624-H108
QMX3.P37
NEW PRODUCT
4-28
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Pushbutton with KNX PL-Link
Pushbutton‚ i-system
UP 22..
Design
Dimensions (W x H x D)
55 x 55 x 11 mm
Range overview UP 22..
Display
Number of keys
Color
Stock No.
Product No.
None
2
Titanium white
5WG1221-2DB12
UP 221/12
None
2
Aluminum metallic
5WG1221-2DB32
UP 221/32
Status LED
2
Aluminum metallic
5WG1221-2DB33
UP 221/33
None
4
Titanium white
5WG1222-2DB12
UP 222/12
Status LED
4
Titanium white
5WG1222-2DB13
UP 222/13
None
4
Aluminum metallic
5WG1222-2DB32
UP 222/32
Status LED
4
Aluminum metallic
5WG1222-2DB33
UP 222/33
None
6
Titanium white
5WG1223-2DB12
UP 223/12
None
6
Aluminum metallic
5WG1223-2DB32
UP 223/32
Status LED
6
Aluminum metallic
5WG1223-2DB33
UP 223/33
Product Title
Stock No.
Product No.
Pushbutton‚ single‚ without status LED‚ titanium white
5WG1221-2DB12
UP 221/12
Pushbutton‚ single‚ with status LED‚ titanium white
5WG1221-2DB13
UP 221/13
Pushbutton‚ single‚ without status LED‚ aluminum metallic
5WG1221-2DB32
UP 221/32
Pushbutton‚ single‚ with status LED‚ aluminum metallic
5WG1221-2DB33
UP 221/33
Pushbutton‚ double‚ without status LED‚ titanium white
5WG1222-2DB12
UP 222/12
Pushbutton‚ double‚ with status LED‚ titanium white
5WG1222-2DB13
UP 222/13
Pushbutton‚ double‚ without status LED‚ aluminum metallic
5WG1222-2DB32
UP 222/32
Pushbutton‚ double‚ with status LED‚ aluminum metallic
5WG1222-2DB33
UP 222/33
Pushbutton‚ triple‚ without status LED‚ titanium white
5WG1223-2DB12
UP 223/12
Pushbutton‚ triple‚ without status LED‚ aluminum metallic
5WG1223-2DB32
UP 223/32
Pushbutton‚ triple‚ with status LED‚ aluminum metallic
5WG1223-2DB33
UP 223/33
4
Range overview UP 22..
Pushbutton with scene controller and IR receiver decoder‚ i-system
Design
Dimensions (W x H x D)
UP 223/..5
55 x 55 x 11 mm
4-29
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Pushbutton with KNX PL-Link
Range overview UP 223/..5
Display
Color
Communication
Stock No.
Product No.
Status LED
Titanium white
IR receiver decoder
(industry standard)
5WG1223-2DB15
UP 223/15
Status LED
Aluminum metallic
IR receiver decoder
(industry standard)
5WG1223-2DB35
UP 223/35
4
4-30
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Pushbutton with KNX PL-Link
Pushbutton‚ DELTA style
Dimensions (W x H x D)
UP 28..
68 x 68 x 14 mm
Range overview UP 28..
Display
Number of keys
None
Color
Stock No.
Product No.
Titanium white
5WG1285-2DB12
UP 285/12
Status LED
Status LED
Titanium white
5WG1285-2DB13
UP 285/13
None
None
Platinum metallic
5WG1285-2DB42
UP 285/42
Status LED
Status LED
Platinum metallic
5WG1285-2DB43
UP 285/43
None
None
Titanium white
5WG1286-2DB12
UP 286/12
Status LED
Status LED
Titanium white
5WG1286-2DB13
UP 286/13
None
None
Platinum metallic
5WG1286-2DB42
UP 286/42
Status LED
Status LED
Platinum metallic
5WG1286-2DB43
UP 286/43
None
None
Titanium white
5WG1287-2DB12
UP 287/12
Status LED
Status LED
Titanium white
5WG1287-2DB13
UP 287/13
None
None
Platinum metallic
5WG1287-2DB42
UP 287/42
Status LED
Status LED
Platinum metallic
5WG1287-2DB43
UP 287/43
Pushbutton with scene controller and IR receiver decoder‚ DELTA style
Design
Dimensions (W x H x D)
4
UP 287/..5
68 x 68 x 14 mm
Range overview UP 287/..5
Display
Color
Communication
Stock No.
Product No.
Status LED
Titanium white
IR receiver decoder
(industry standard)
5WG1287-2DB15
UP 287/15
Status LED
Platinum metallic
IR receiver decoder
(industry standard)
5WG1287-2DB45
UP 287/45
4-31
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Accessories for pushbutton with KNX PL-Link
UP 117/11
Bus coupling unit
Bus coupling unit for connection of a modular bus device to the bus line:
V with 10-pole peripheral external interface (PEI)
V for clipping on an application module (e.g. pushbutton)
V with reverse voltage protection for switching off the bus coupling unit if the bus cable is incorrectly
connected
V for installation in a switch and socket box with 60 mm in diameter and 40 mm depth
V with bus connection via bus terminal
Communication
Dimensions (W x H x D)
4
S 425/72
KNX S-Mode
KNX PL-Link
71 x 71 x 16 mm
Stock No.
Product No.
5WG1117-2AB11
UP 117/11
IR remote‚ silver
IR hand-held transmitters:
V For wireless control of actuators via infrared signals‚ e.g. for switching on/off/toggle‚ dimming‚ send
value‚ control solar protection or recall/save scenes
V 1 LED per group for control of transmission and battery
V Infrared wave length: 890 nm
V Infrared frequency: 455 kHz
V Transmission range: 20 m‚ non-directional
V Power supply by two commercially available 1.5 V batteries type Alkaline LR03/AAA
Communication
Dimensions (W x H x D)
IR sender
(industry standard)
55 x 154 x 24 mm
Accessories for pushbuttons UP 223 and UP 287 with IR receiver decoder
AP 42../13
Stock No.
Product No.
5WG1425-7AB72
S 425/72
IR wall switch‚ titanium white
V For wireless control of actuators via infrared signals‚ e.g. for switching On/Off/Over‚ dimming‚ value
transmission‚ shutter/blind control or call up/store scenes
V 1 LED for control of transmission and battery
V Red LED cover
V DIP switches for selection of the channel number (1...64)
V Infrared wave length: 890 nm
V Infrared frequency: 455 kHz
V Transmitter range: 8 m‚ non-directional
V Power supply by two commercially available 1.5 V batteries type Alkaline LR03/AAA
V Mounting frame for mounting on a flush-mounting wall box‚ on a wall surface or with adhesive tape
on an even surface
Communication
Color
Dimensions (W x H x D)
IR sender
(industry standard)
Titanium white
82 x 115 x 21 mm
Accessories for pushbuttons with IR receiver decoder have to be ordered separately‚ see chapter Gateways‚ Interface Converters - KNX infrared.
4-32
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Accessories for pushbutton with KNX PL-Link
Range overview AP 42../13
Product Title
Stock No.
Product No.
IR wall switch‚ single‚ titanium white
5WG1420-3AB13
AP 420/13
IR wall switch‚ double‚ titanium white
5WG1421-3AB13
AP 421/13
IR wall switch‚ quadruple‚ titanium white
5WG1422-3AB13
AP 422/13
4
4-33
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
Sensors with KNX PL-Link
UP 258D11
Motion detector with brightness sensor
V Integrated 2-step light control‚ optionally available in fully automatic or semi-automatic version
V 3 independent control channels each with 2 start objects and 2 end objects
Communication
Dimensions (Ø x H)
KNX S-Mode
KNX PL-Link
88 x 63 mm
4
AP 258E01
Stock No.
Product No.
5WG1258-2DB11
UP 258D11
Surface-mounting enclosures for UP 258E21 or UP 258D11
For fixing the presence detector as a surface mounting device
Dimensions (Ø x H)
88 x 44 mm
Stock No.
Product No.
5WG1258-7EB01
AP 258E01
4-34
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo TRA
VAV compact controller with KNX PL-Link
VAV compact controller KNX
G..B181.1E/KN
- Networked compact controller with KNX capability for plants with variable or constant air volume flow
- Integrated‚ highly precise differential pressure sensor‚ damper actuator and digitally configurable air
volume controller
- Nominal torque 5 or 10 Nm‚ air damper rotation angle mechanically adjustable between 0 and 90°
- Configurable as single device per room or for cascade control with pressure ratio 1:1‚ positive pressure‚ or negative pressure
- Prewired with a 0.9 m connecting cable and a 0.9 m KNX bus cable
Data sheet
N3547
Communication
KNX S-Mode
KNX LTE-Mode
KNX PL-Link
90 °
150 s
IP54
71 x 158 x 61 mm
Angular rotation
Positioning time
Degree of protection
Dimensions (W x H x D)
4
Range overview G..B181.1E/KN
Torque
[Nm]
Operating voltage
[V]
Air damper area
[m²]
Power consumption
[VA]
Stock No.
Product No.
5
AC 24
0.8
3
S55499-D134
GDB181.1E/KN
10
AC 24
1.5
3
S55499-D135
GLB181.1E/KN
Basic Documentation No.: P3547
4-35
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXL (Bus)
RXL2..
Room controller with bus communication
The controllers RXL2.. are used for temperature control in individual rooms.
- For 2-pipe with changeover or 4-pipe fan coil systems
- Control of thermic valve actuators AC 24 V‚ PDM‚ valve and damper actuators AC 24 V (3-position)
- Volt-free relay contacts for fan speed control
- Relay for electric heating (RXL22.1 only)
- Bus communication
- Connection to Desigo building automation and control system via PX KNX
- Commissioning with "Handy Tool" QAX34.3 or Synco ACS
Application description fan coil: CM110677
Application description RAD/CLC: CM110676
Operating voltage
Frequency
Power consumption
Control algorithm
Digital inputs‚ number
Triac outputs
4
Triac output‚ switching voltage
Triac output‚ switching current
Relay output‚ switching voltage
Relay output‚ switching current
Communication
Service plug
Mounting location
Mounting
Dimensions (W x H x D)
AC 24 V
50/60 Hz
15 VA
PI
2
ON/OFF
PWM
3-position
AC 24 V
0.5 A
AC 250 V
5 (4) A
Bus
Room unit: PPS2
RXT20.1
Ceiling voids with cover
Fan coil
Panel
On DIN rail
With screws
113 x 167 x 62 mm
Range overview RXL2..
Product Title
Triac outputs‚
number
Relay outputs‚
number
Data sheet
Stock No.
Product No.
Room controller for
3-speed fan
4
3
N3877
BPZ:RXL21.1/FC-10
RXL21.1/FC-10
Room controller for
3-speed fan
4
3
N3877
BPZ:RXL21.1/FC-11
RXL21.1/FC-11
Room controller with 2
3-speed fan and electric heating coil
4
N3877
BPZ:RXL22.1/FC-12
RXL22.1/FC-12
4
0
N3878
BPZ:RXL24.1/CC-02
RXL24.1/CC-02
Room controller for
chilled ceilings and
radiators
The application determines the usable actuator (2-position /3-position) with the triac output
4-36
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXL (Bus)
Communicating room controller for fan-coil applications with proprietary communication
RXL39.1/FC-13
The RXL39.1 room controller is used for temperature control in individual rooms.
- For 2-pipe and 4-pipe fan coil systems with or without changeover
- PI control
- Proprietary bus communication
- Connection to Desigo building automation and control system via PX KNX
- DC 0...10 V control of valve and actuators‚ fan (ECM)‚ and electric heater
- Potential-free relay contacts to release fan and electric heating
- Commissioning with "Handy Tool" QAX34.3 or Synco ACS
Data sheet
N3876
Operating voltage
Frequency
Power consumption
Control algorithm
Digital inputs‚ number
Digital outputs‚ number
Analog inputs‚ number
Analog outputs‚ number
Relay output‚ switching voltage
Relay output‚ switching current
Degree of protection
Communication
AC 230 V
50/60 Hz
12 VA
PI
4
0
2
3
AC 250 V
5 (4) A
IP20
Bus: Proprietär
Raumgerät: PPS2
ACS‚ HandyTool
On DIN rail
152 x 120 x 62 mm
Service plug
Mounting
Dimensions (W x H x D)
4
Stock No.
Product No.
S55373-C122
RXL39.1/FC-13
Accessories for RXL..
Product Title
Data sheet
Stock No.
Product No.
Power amplifier for thermal actuators AC 24 V‚ PWM
N3591
BPZ:UA1T
UA1T
Terminal cover for RXA2../ RXB2../ RXL2../ RXC2..
N3834
BPZ:RXZ20.1
RXZ20.1
Terminal cover for RXB3.. / RXL3.. / RXC3..
N3840
BPZ:RXZ30.1
RXZ30.1
Power supply unit DC 29 V‚ 160 mA with additional unchoked
output‚ N 125/02
2.14.4.4
5WG1125-1AB02
N 125/02
Power supply unit DC 29 V‚ 320 mA with additional unchoked
output‚ N 125/12
2.14.4.4
5WG1125-1AB12
N 125/12
Power supply unit DC 29 V‚ 640 mA with additional unchoked
output‚ N 125/22
2.14.4.4
5WG1125-1AB22
N 125/22
4-37
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXL (Bus)
Room units for RXL..
4
Product Title
Data sheet
Stock No.
Product No.
Room unit with sensor and PPS2 interface
N1741
BPZ:QAX30.1
QAX30.1
Room unit with sensor‚ setpoint adjuster and PPS2 interface
N1741
BPZ:QAX31.1
QAX31.1
Room unit with sensor‚ setpoint and operating mode selector
and PPS2 interface
N1641
BPZ:QAX32.1
QAX32.1
Room unit with sensor‚ setpoint and operating mode selector‚
fan speed selection‚ and PPS2 interface
N1642
BPZ:QAX33.1
QAX33.1
Room unit with sensor‚ setpoint and operating mode selector‚
display and PPS2 interface
N1645
BPZ:QAX34.1
QAX34.1
Room unit with sensor‚ setpoint and operating mode selector‚
display and PPS2 interface
N1640
BPZ:QAX34.3
QAX34.3
Flush-mounted room unit complete with PPS2 interface and
design frame
N1649
BPZ:QAX84.1/PPS2
QAX84.1/PPS2
Universal setpoint adjuster with PPS2 interface
N1646
BPZ:QAX39.1
QAX39.1
Product Title
Data sheet
Stock No.
Product No.
Room temperature sensor LG-Ni1000
N1721
BPZ:QAA24
QAA24
Front module with passiv temperature measurement‚ LGNi1000
N1408
S55720-S133
AQR2531ANW
Room temperature sensor LG-Ni1000 for mounting on recessed
conduit boxes
N1722
BPZ:QAA64
QAA64
Cable temperature sensor PVC 2 m‚ LG-Ni1000
N1831
BPZ:QAP22
QAP22
Duct temperature sensor 400 mm‚ LG-Ni1000
N1761
BPZ:QAM2120.040
QAM2120.040
Temperature sensors for RXL..
For the complete flush mounting sensor offering including mounting plates and frames‚ see product catalog chapter 6
Dewpoint sensor for RXL..
Product Title
Data sheet
Stock No.
Product No.
Condensation monitor‚ AC/DC 24 V
N3302
S55770-T325
QXA2601
Condensation monitor‚ AC/DC 24 V‚ with remote sensor head
(cable length 1.5 m)
N3302
S55770-T326
QXA2602
Condensation monitor‚ AC 230 V
N3302
S55770-T327
QXA2603
Condensation monitor‚ AC 230 V‚ with remote sensor head
(cable length 1.5 m)
N3302
S55770-T328
QXA2604
Product Title
Data sheet
Stock No.
Product No.
Electrothermal actuator‚ AC/DC 24 V‚ NC‚ 2P‚ PDM‚ PR
N4884
S55174-A115
STA73PR/00
Electrothermal actuator‚ AC/DC 24 V‚ NO‚ 2P‚ PDM‚ PR
N4884
S55174-A116
STP73PR/00
Electromotoric actuator‚ 100 N‚ 2.5/5 mm‚ 1.5 m‚ AC 24 V‚ 3P
N4893
BPZ:SSA81
SSA81
Electromotoric actuator‚ 200 N‚ 5.5 mm‚ AC 24 V‚ 1.5 m‚ 3P
N4891
BPZ:SSB81
SSB81
Electromotoric actuator‚ 160 N‚ 2.5 mm‚ 1.5 m‚ AC 24 V‚ 3P
N4864
BPZ:SSP81
SSP81
Valve actuators for RXL..
NEW PRODUCT
4-38
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXL (Bus)
Damper actuators for RXL..
Product Title
Data sheet
Stock No.
Product No.
Rotary air damper actuators 5 Nm‚ without spring return
N4634
BPZ:GDB..1E
GDB..1E
Linear air damper actuators 125 N‚ without spring return
N4664
BPZ:GDB..2E
GDB..2E
Rotary air damper actuators 10 Nm‚ without spring return
N4634
BPZ:GLB..1E
GLB..1E
Linear air damper actuators 250 N‚ without spring return
N4664
BPZ:GLB..2E
GLB..2E
For suitable combination of actuator STA.. and connection cable ASY..‚ see chapter introduction page 7-4 of the HVAC Catalog
Interfaces and tools RXB and RXL
Product Title
Data sheet
Stock No.
Product No.
Service unit with LCD
N3851
BPZ:RXT20.1
RXT20.1
Room unit with sensor‚ setpoint and operating mode selector‚
display and PPS2 interface
N1640
BPZ:QAX34.3
QAX34.3
4
Connection to Desigo or Synco 700
Connection of RXB and RXL room controllers with integrated control and supervisory functions
Product Title
Data sheet
Stock No.
Product No.
System controller for the integration
N9221
BPZ:PXC00-U
PXC00-U
Central control unit RMB795B for RXB/RXL room controllers and
room thermostats RDG/RDF/RDU
N3122
BPZ:RMB795B..
RMB795B..
4-39
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXB (KNX)
RXB2..
Room controller with KNX communication
The controllers are used for temperature control in individual rooms.
- For 2-pipe with changeover or 4-pipe fan coil systems
- For radiator and chilled ceiling (RXB24.1 only)
- Control of thermal valve actuators AC 24 V‚ PDM‚ valve and damper actuators AC 24 V (3-position) as
well as KNX bus actuators
- Potential-free relay contacts for fan speed control
- Relay for electric heating (RXB22.1 only)
- KNX bus communication
- Connection to Desigo building automation and control system via PX KNX
- Commissioning with "Handy Tool" QAX34.3 or Synco ACS
Application description fan coil: CM110672
Application description RAD/CLC: CM110671
4
Operating voltage
Frequency
Power consumption
Control algorithm
Digital inputs‚ number
Triac outputs
Triac output‚ switching voltage
Triac output‚ switching current
Relay output‚ switching voltage
Relay output‚ switching current
Communication
Service plug
Mounting location
Mounting
Dimensions (W x H x D)
AC 230 V
50/60 Hz
Max. 12 VA
PI
2
ON/OFF
PWM
3-position
AC 24 V
0.5 A
AC 250 V
5 (4) A
Bus: KNX (S-mode and LTE mode)
Room unit: PPS2
RXT20.1
Ceiling voids with cover
Fan coil
Panel
On DIN rail
With screws
113 x 167 x 62 mm
Range overview RXB2..
Product Title
Triac outputs‚
number
Relay outputs‚
number
Data sheet
Stock No.
Product No.
Room controller for
3-speed fan
4
3
N3873
BPZ:RXB21.1/FC-10
RXB21.1/FC-10
Room controller for
3-speed fan
4
3
N3873
BPZ:RXB21.1/FC-11
RXB21.1/FC-11
Room controller with 2
3-speed fan and electric heating coil
4
N3873
BPZ:RXB22.1/FC-12
RXB22.1/FC-12
4
0
N3874
BPZ:RXB24.1/CC-02
RXB24.1/CC-02
Room controller for
chilled ceilings and
radiators
The application determines the usable actuator (2-position /3-position) with the triac output
4-40
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXB (KNX)
Room controller for fan-coil applications with KNX communication
RXB39.1/FC-13
The RXB39.1 room controller is used for temperature control in individual rooms.
- For 2-pipe and 4-pipe fan coil systems with or without changeover
- PI control
- KNX bus communication
- Connection to Desigo building automation and control system via PX KNX
- DC 0...10 V control of valve and actuators‚ fan (ECM)‚ and electric heater
- 2 Potential-free relay contacts to release fan and electric heating
- Commissioning with ETS Professional‚ "Handy Tool" QAX34.3 or Synco ACS
- Operating voltage AC 230 V
- Plug-in screw terminals
Data sheet
N3875
Operating voltage
Frequency
Power consumption
Control algorithm
Digital inputs‚ number
Digital outputs‚ number
Analog inputs‚ number
Analog outputs‚ number
Relay output‚ switching voltage
Relay output‚ switching current
Degree of protection
Communication
AC 230 V
50/60 Hz
12 VA
PI
4
0
2
3
AC 250 V
5 (4) A
IP20
Bus: KNX
Room unit: PPS2
ETS Professional‚ ACS‚ HandyTool
On DIN rail
152 x 120 x 62 mm
Service plug
Mounting
Dimensions (W x H x D)
4
Stock No.
Product No.
S55373-C121
RXB39.1/FC-13
Accessories for RXB..
Product Title
Data sheet
Stock No.
Product No.
Power amplifier for thermal actuators AC 24 V‚ PWM
N3591
BPZ:UA1T
UA1T
Terminal cover for RXA2../ RXB2../ RXL2../ RXC2..
N3834
BPZ:RXZ20.1
RXZ20.1
Terminal cover for RXB3.. / RXL3.. / RXC3..
N3840
BPZ:RXZ30.1
RXZ30.1
Power supply unit DC 29 V‚ 160 mA with additional unchoked
output‚ N 125/02
2.14.4.4
5WG1125-1AB02
N 125/02
Power supply unit DC 29 V‚ 320 mA with additional unchoked
output‚ N 125/12
2.14.4.4
5WG1125-1AB12
N 125/12
Power supply unit DC 29 V‚ 640 mA with additional unchoked
output‚ N 125/22
2.14.4.4
5WG1125-1AB22
N 125/22
4-41
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXB (KNX)
Room units for RXB..
4
Product Title
Data sheet
Stock No.
Product No.
Room unit with sensor and PPS2 interface
N1741
BPZ:QAX30.1
QAX30.1
Room unit with sensor‚ setpoint adjuster and PPS2 interface
N1741
BPZ:QAX31.1
QAX31.1
Room unit with sensor‚ setpoint and operating mode selector
and PPS2 interface
N1641
BPZ:QAX32.1
QAX32.1
Room unit with sensor‚ setpoint and operating mode selector‚
fan speed selection‚ and PPS2 interface
N1642
BPZ:QAX33.1
QAX33.1
Room unit with sensor‚ setpoint and operating mode selector‚
display and PPS2 interface
N1645
BPZ:QAX34.1
QAX34.1
Room unit with sensor‚ setpoint and operating mode selector‚
display and PPS2 interface
N1640
BPZ:QAX34.3
QAX34.3
Flush-mounted room unit complete with PPS2 interface and
design frame
N1649
BPZ:QAX84.1/PPS2
QAX84.1/PPS2
Room unit with EnOcean interface
N1663
S55623-H104
QAX95.4
Room unit with EnOcean interface‚ setpoint adjuster
N1663
S55623-H105
QAX96.4
Room unit with EnOcean interface‚ setpoint adjuster‚ button and
switch
N1663
S55623-H106
QAX97.4
Room unit with EnOcean interface‚ setpoint adjuster‚ button and
switch for fan stages
N1663
S55623-H107
QAX98.4
Radio frequency receiver with Gateway EnOcean/KNX
N1662
S55842-Z101
RXZ97.1/KNX
Universal setpoint adjuster with PPS2 interface
N1646
BPZ:QAX39.1
QAX39.1
Product Title
Data sheet
Stock No.
Product No.
Room temperature sensor LG-Ni1000
N1721
BPZ:QAA24
QAA24
Front module with passiv temperature measurement‚ LGNi1000
N1408
S55720-S133
AQR2531ANW
Room temperature sensor LG-Ni1000 for mounting on recessed
conduit boxes
N1722
BPZ:QAA64
QAA64
Cable temperature sensor PVC 2 m‚ LG-Ni1000
N1831
BPZ:QAP22
QAP22
Duct temperature sensor 400 mm‚ LG-Ni1000
N1761
BPZ:QAM2120.040
QAM2120.040
Temperature sensors for RXB..
For the complete flush mounting sensor offering including mounting plates and frames‚ see product catalog chapter 6
Dewpoint sensors for RXB..
Product Title
Data sheet
Stock No.
Product No.
Condensation monitor‚ AC/DC 24 V
N3302
S55770-T325
QXA2601
Condensation monitor‚ AC/DC 24 V‚ with remote sensor head
(cable length 1.5 m)
N3302
S55770-T326
QXA2602
Condensation monitor‚ AC 230 V
N3302
S55770-T327
QXA2603
Condensation monitor‚ AC 230 V‚ with remote sensor head
(cable length 1.5 m)
N3302
S55770-T328
QXA2604
NEW PRODUCT
4-42
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXB (KNX)
Valve actuators for RXB..
Product Title
Data sheet
Stock No.
Product No.
Electrothermal actuator‚ AC/DC 24 V‚ NC‚ 2P‚ PDM‚ PR
N4884
S55174-A115
STA73PR/00
Electrothermal actuator‚ AC/DC 24 V‚ NO‚ 2P‚ PDM‚ PR
N4884
S55174-A116
STP73PR/00
Electromotoric actuator‚ 100 N‚ 2.5/5 mm‚ 1.5 m‚ AC 24 V‚ 3P
N4893
BPZ:SSA81
SSA81
Electromotoric actuator‚ 200 N‚ 5.5 mm‚ AC 24 V‚ 1.5 m‚ 3P
N4891
BPZ:SSB81
SSB81
Electromotoric actuator‚ 160 N‚ 2.5 mm‚ 1.5 m‚ AC 24 V‚ 3P
N4864
BPZ:SSP81
SSP81
For suitable combination of actuator STA.. and connection cable ASY..‚ see chapter introduction page 7-4 of the HVAC Catalog
4
Damper actuators for RXB..
Product Title
Data sheet
Stock No.
Product No.
Rotary air damper actuators 5 Nm‚ without spring return
N4634
BPZ:GDB..1E
GDB..1E
Linear air damper actuators 125 N‚ without spring return
N4664
BPZ:GDB..2E
GDB..2E
Rotary air damper actuators 10 Nm‚ without spring return
N4634
BPZ:GLB..1E
GLB..1E
Linear air damper actuators 250 N‚ without spring return
N4664
BPZ:GLB..2E
GLB..2E
Product Title
Data sheet
Stock No.
Product No.
Service unit with LCD
N3851
BPZ:RXT20.1
RXT20.1
Room unit with sensor‚ setpoint and operating mode selector‚
display and PPS2 interface
N1640
BPZ:QAX34.3
QAX34.3
Interfaces and tools RXB and RXL
Connection to Desigo or Synco 700
Connection of RXB and RXL room controllers with integrated control and supervisory functions
Product Title
Data sheet
Stock No.
Product No.
System controller for the integration
N9221
BPZ:PXC00-U
PXC00-U
Central control unit RMB795B for RXB/RXL room controllers and
room thermostats RDG/RDF/RDU
N3122
BPZ:RMB795B..
RMB795B..
4-43
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXC (LonWorks)
RXC10.5/..
Radiator‚ chilled ceilings and VAV room controllers with LonWorks communication
The RXC10.5 controller is used for temperature control in individual rooms.
- For chilled ceilings and radiators
- VAV
- PID control
- Loadable application software
- LonMark-compatible bus communications
- Connection to Desigo building automation and control system
- Control of thermal valve actuators‚ AC 24 V‚ PDM*
- Operating voltage AC 24 V
* PDM = pulse duration modulation
4
Data sheet
N3830
Operating voltage
Frequency
Power consumption
Control algorithm
Digital inputs‚ number
Position feedback
Triac outputs‚ number
Triac outputs
Triac output‚ switching voltage
Triac output‚ switching current
Communication
Service plug
Mounting location
Dimensions (W x H x D)
AC 24 V
50/60 Hz
2 VA
PI
2
DC 0...10 V
2
ON/OFF
AC 24 V
0.5 A
Bus: LonWorks
RXT10..‚ RXT20.1
In room
92 x 126 x 40 mm
Range overview RXC10.5/..
Product Title
Stock No.
Radiator‚ chilled ceilings and VAV room controller with LonWorks communication and basic S55373-C110
application OOO10
Product No.
RXC10.5/00010
The application determines the usable actuator (2-position /3-position) with the triac output
Accessories for RXC1..
Product Title
Data sheet
Stock No.
Product No.
Power amplifier for thermal actuators AC 24 V‚ PWM
N3591
BPZ:UA1T
UA1T
4-44
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXC (LonWorks)
Room controller with LonWorks communication
RXC20/21/22..
The RXC20..‚ RXC21.. and RXC22.. controllers are used for temperature control in individual rooms.
- For 2- or 4-pipe fan coil systems with or without changeover
- For chilled ceilings and radiators
- Control of thermic valve actuators AC 24 V‚ PDM‚ valve and damper actuators AC 24 V (3-position) or
electric air heater units
- Volt-free relay contacts for fan speed control
- Connection to Desigo building automation and control system
- LonMark-compatible bus communication
- Plug-in screw terminal
Application description: CA110300
Data sheet
N3834
Operating voltage
Frequency
Power consumption
Control algorithm
Digital inputs‚ number
Triac outputs
Triac output‚ switching voltage
Triac output‚ switching current
Relay output‚ switching voltage
Relay output‚ switching current
Communication
AC 230 V
50/60 Hz
12 VA
PI
2
ON/OFF
AC 24 V
0.5 A
AC 250 V
5 (4) A
Bus: LonWorks
Room unit: PPS2
RXT10.3‚ RXT20.1
Ceiling voids with cover
Fan coil
Panel
On DIN rail
With screws
113 x 167 x 62 mm
Service plug
Mounting location
Mounting
Dimensions (W x H x D)
4
Range overview RXC20/21/22..
Product Title
Triac outputs‚ number Relay outputs‚
number
Electric reheater relay Stock No.
Product No.
Room controller for 2
fan coils with 1-speed
fan or chilled ceiling/radiator with
basic application
OOO20
1
0
S55373-C111
RXC20.5/00020
Room controller for 4
fan coils with 3-speed
fan and/or outside air
damper with basic
application OOO21
3
0
S55373-C112
RXC21.5/00021
Room controller for 2
fan coils with 3-speed
fan and electric
reheater with basic
application OOO22
4
1
S55373-C113
RXC22.5/00022
The application determines the usable actuator (2-position/3-position) with the triac output
4-45
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXC (LonWorks)
Accessories for RXC2..
Product Title
Data sheet
Stock No.
Product No.
Terminal cover for RXA2../ RXB2../ RXL2../ RXC2..
N3834
BPZ:RXZ20.1
RXZ20.1
Power amplifier for thermal actuators AC 24 V‚ PWM
N3591
BPZ:UA1T
UA1T
RXC39.5/00039
Communicating room controller‚ with LonMark compatible bus communication
The RXC39.5 room controller is used for temperature control in individual rooms.
- For fan coil systems with continuous (ECM) fan
- Downloadable application software
- LonMark-compatible bus communication
- Connection to Desigo building automation and control system
- DC 0...10 V control of valve and damper actuators‚ fan‚ and electric heater
- Commissioning with RXT10 or standard LonWorks tool
- Operating voltage AC 24 V
- Plug-in screw terminals
4
Data sheet
N3856
Operating voltage
Frequency
Power consumption
Control algorithm
Digital inputs‚ number
Digital outputs‚ number
Analog inputs‚ number
Analog outputs‚ number
Triac outputs
Triac output‚ switching voltage
Triac output‚ switching current
Relay output‚ switching voltage
Relay output‚ switching current
Communication
AC 24 V
50/60 Hz
33 VA
PI
4
0
1
4
ON/OFF
AC 24 V
0.5 A
AC 250 V
2 (2) A
Bus: LonWorks
Room unit: PPS2
RXT10; Standard-LonWorks-Tool
Ceiling voids with cover
Fan coil
Panel
On DIN rail
152 x 120 x 62 mm
Service plug
Mounting location
Mounting
Dimensions (W x H x D)
Stock No.
Product No.
S55373-C118
RXC39.5/00039
Accessories for RXC39..
Product Title
Data sheet
Stock No.
Product No.
Terminal cover for RXB3.. / RXL3.. / RXC3..
N3840
BPZ:RXZ30.1
RXZ30.1
Power amplifier for thermal actuators AC 24 V‚ PWM
N3591
BPZ:UA1T
UA1T
4-46
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXC (LonWorks)
RXC30.5/..
Radiators‚ chilled ceilings‚ lighting‚ base module with LonWorks communication
The controllers are used for temperature and lighting control in individual rooms.
- PID control of chilled ceilings and radiators
- Extension modules for control of lighting and blinds
- Connection to Desigo building automation and control system
- LonMark-compatible bus communication
- Control of 2 thermic valve actuators AC 24 V (PDM) or 1 motorized valve actuator AC 24 V (3-position)
- Volt-free relay contacts for lighting control (16 A)
- Plug-in screw terminal
Data sheet
N3840
Operating voltage
Frequency
Power consumption
Control algorithm
Digital input‚ application
AC 230 V
50/60 Hz
12 VA
PI
HVAC
Light
HVAC: ON/OFF
AC 24 V
0.5 A
AC 250 V
16 (12) A
Bus: LonWorks
Room unit: PPS2
RXT10.3‚ RXT20.1
Ceiling voids with cover
Panel
On DIN rail
With screws
152 x 120 x 62 mm
Triac outputs
Triac output‚ switching voltage
Triac output‚ switching current
Relay output‚ switching voltage
Relay output‚ switching current
Communication
Service plug
Mounting location
Mounting
Dimensions (W x H x D)
4
Range overview RXC30.5/..
Product Title
Stock No.
Radiators‚ chilled ceilings‚ lighting‚ base module with LonWorks communication‚ basic appli- S55373-C114
cation 00030
Product No.
RXC30.5/00030
The application determines the usable actuator (2-position /3-position) with the triac output
Extension modules and accessories for RXC30..
Product Title
Data sheet
Stock No.
Product No.
Extension module for lighting control
N3842
S55373-C119
RXC40.5
Extension module for blinds control
N3843
S55373-C120
RXC41.5
Terminal cover for RXB3.. / RXL3.. / RXC3..
N3840
BPZ:RXZ30.1
RXZ30.1
Power amplifier for thermal actuators AC 24 V‚ PWM
N3591
BPZ:UA1T
UA1T
4-47
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXC (LonWorks)
RXC31.5/..
VAV base module with LonWorks communication
The RXC31.5 controller is used for VAV room temperature control in individual rooms.
- Control of supply and extract air‚ with volume control dampers or additional VAV compact controllers‚
with or without reheater
- Can be combined with extension modules for control of lighting and blinds
- Downloadable application software
- LonMark-compatible bus communication
- Connection to Desigo building automation and control system
- Control of damper actuators with AC 24 V‚ 3-position or DC 0...10 V positioning signal
- Control of VAV compact controllers (with differential pressure sensor‚ volumetric flow controller and
actuator) with DC 0...10 V signal
- Control of electric or LPHW reheaters with AC 24 V or AC 24 V 3-position signals
- Operating voltage AC 24 V
- Plug-in screw terminal
4
Data sheet
N3844
Operating voltage
Frequency
Power consumption
Control algorithm
Digital inputs‚ number
Analog inputs‚ number
Triac outputs
Position feedback
Mounting
AC 24 V
50/60 Hz
33 VA
PI
3
3
ON/OFF
DC 0...10 V
On DIN rail
With screws
Bus: LonWorks
Room unit: PPS2
RXT10.3‚ RXT20.1
Ceiling voids with cover
Panel
VAV box
152 x 120 x 62 mm
Communication
Service plug
Mounting location
Dimensions (W x H x D)
Range overview RXC31.5/..
Product Title
Stock No.
Product No.
VAV base module with LonWorks communication‚ basic application 00031
S55373-C115
RXC31.5/00031
The application determines the usable actuator (2-position /3-position) with the triac output
Accessories for RXC31..
Product Title
Data sheet
Stock No.
Product No.
Extension module for lighting control
N3842
S55373-C119
RXC40.5
Extension module for blinds control
N3843
S55373-C120
RXC41.5
Terminal cover for RXB3.. / RXL3.. / RXC3..
N3840
BPZ:RXZ30.1
RXZ30.1
Power amplifier for thermal actuators AC 24 V‚ PWM
N3591
BPZ:UA1T
UA1T
4-48
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXC (LonWorks)
RXC32.5/..
VAV room controller with LonWorks communication
The RXC32.5 controller is used for VAV room temperature control in individual rooms.
- Control of the supply or extract air with volume control dampers‚ with or without reheater
- Downloadable application software
- LonMark-compatible bus communication
- Connetion to Desigo building automation and control system
- Control of damper actuators with AC 24 V‚ 3-position positioning signal
- Control of electric or LPHW reheaters with AC 24 V or AC 24 V 3-position signals
- Built-in air flow sensor
- Operating voltage AC 24 V
- Plug-in screw terminal
Data sheet
N3845
Operating voltage
Frequency
Power consumption
Control algorithm
Digital inputs‚ number
Triac outputs
Triac output‚ switching voltage
Triac output‚ switching current
Communication
AC 24 V
50/60 Hz
33 VA
PI
2
ON/OFF
AC 24 V
0.5 A
Bus: LonWorks
Room unit: PPS2
RXT10.3‚ RXT20.1
Ceiling voids with cover
Panel
VAV box
On DIN rail
With screws
152 x 120 x 62 mm
Service plug
Mounting location
Mounting
Dimensions (W x H x D)
4
Range overview RXC32.5/..
Product Title
Stock No.
Product No.
VAV room controller with LonWorks communication‚ basic application 00032
S55373-C116
RXC32.5/00032
The application determines the usable actuator (2-position /3-position) with the triac output
Accessories for RXC32..
Product Title
Data sheet
Stock No.
Product No.
Terminal cover for RXB3.. / RXL3.. / RXC3..
N3840
BPZ:RXZ30.1
RXZ30.1
Power amplifier for thermal actuators AC 24 V‚ PWM
N3591
BPZ:UA1T
UA1T
4-49
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXC (LonWorks)
RXC40.5
Extension module for lighting control
- Switching and dimming of 2 groups of lights
4
Data sheet
N3842
Voltage supply
Digital inputs‚ number
Relay output‚ switching voltage
Relay output‚ switching current
Analog outputs‚ number
Interface for base module
Mounting location
From base module
4
AC 250 V
12 (12) A
2
PE-bus for RXC3..
Ceiling voids with cover
Panel
On DIN rail
80 x 120 x 62 mm
Mounting
Dimensions (W x H x D)
RXC41.5
Stock No.
Product No.
S55373-C119
RXC40.5
Extension module for blinds control
- Control of 2 electric motors for blinds
Data sheet
N3843
Voltage supply
Digital inputs‚ number
Relay output‚ switching voltage
Relay output‚ switching current
Interface for base module
Mounting location
From base module
4
AC 250 V
3 (3) A
PE-bus for RXC3..
Ceiling voids with cover
Panel
On DIN rail
80 x 120 x 62 mm
Mounting
Dimensions (W x H x D)
Stock No.
Product No.
S55373-C120
RXC41.5
Accessories for RXC40.. and RXC41..
Product Title
Data sheet
Stock No.
Product No.
Terminal cover for RXC4.. and AQX2000
N3842
BPZ:RXZ40.1
RXZ40.1
Product Title
Data sheet
Stock No.
Product No.
System controller BACnet/LonTalk
N9222
BPZ:PXC00.D
PXC00.D
System controller BACnet/IP
N9222
BPZ:PXC00-E.D
PXC00-E.D
Automation station BACnet/LonTalk‚ with up to 52 data points
N9222
S55372-C109
PXC50.D
Automation station BACnet/IP‚ with up to 52 data points
N9222
S55372-C110
PXC50-E.D
Automation station BACnet/LonTalk‚ with up to 200 data points
N9222
BPZ:PXC100.D
PXC100.D
Automation station BACnet/IP‚ with up to 200 data points
N9222
BPZ:PXC100-E.D
PXC100-E.D
Automation station BACnet/LonTalk‚ with more than 200 data
points
N9222
BPZ:PXC200.D
PXC200.D
Automation station BACnet/IP‚ with more than 200 data points
N9222
BPZ:PXC200-E.D
PXC200-E.D
Connection to Desigo
4-50
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXC (LonWorks)
Room units for RXC..
Product Title
Data sheet
Stock No.
Product No.
Room unit with sensor and PPS2 interface
N1741
BPZ:QAX30.1
QAX30.1
Room unit with sensor‚ setpoint adjuster and PPS2 interface
N1741
BPZ:QAX31.1
QAX31.1
Room unit with sensor‚ setpoint and operating mode selector
and PPS2 interface
N1641
BPZ:QAX32.1
QAX32.1
Room unit with sensor‚ setpoint and operating mode selector‚
fan speed selection‚ and PPS2 interface
N1642
BPZ:QAX33.1
QAX33.1
Room unit with sensor‚ setpoint and operating mode selector‚
display and PPS2 interface
N1645
BPZ:QAX34.1
QAX34.1
Room unit with sensor‚ setpoint and operating mode selector‚
display and PPS2 interface
N1640
BPZ:QAX34.3
QAX34.3
Flush-mounted room unit complete with PPS2 interface and
design frame
N1649
BPZ:QAX84.1/PPS2
QAX84.1/PPS2
Versatile room unit with LonWorks interface‚ lighting systems
(on / off)
N1648
S55623-H114
QAX50.5/C000
Versatile room unit with LonWorks interface‚ lighting systems
(dimmed)
N1648
S55623-H115
QAX51.5/C000
Room unit with EnOcean interface
N1663
S55623-H104
QAX95.4
Room unit with EnOcean interface‚ setpoint adjuster
N1663
S55623-H105
QAX96.4
Room unit with EnOcean interface‚ setpoint adjuster‚ button and
switch
N1663
S55623-H106
QAX97.4
Room unit with EnOcean interface‚ setpoint adjuster‚ button and
switch for fan stages
N1663
S55623-H107
QAX98.4
Radio frequency receiver with Gateway EnOcean/LonWorks‚ AC /
DC 24 V‚ external antenna
N1661
S55842-Z100
RXZ95.1/LON
Universal setpoint adjuster with PPS2 interface
N1646
BPZ:QAX39.1
QAX39.1
4
Temperature sensors for RXC..
Product Title
Data sheet
Stock No.
Product No.
Room temperature sensor LG-Ni1000
N1721
BPZ:QAA24
QAA24
Front module with passiv temperature measurement‚ LGNi1000
N1408
S55720-S133
AQR2531ANW
Room temperature sensor LG-Ni1000 for mounting on
recessed conduit boxes
N1722
BPZ:QAA64
QAA64
Duct temperature sensor 400 mm‚ LG-Ni1000
N1761
BPZ:QAM2120.040
QAM2120.040
Cable temperature sensor PVC 2 m‚ LG-Ni1000
N1831
BPZ:QAP22
QAP22
For the complete flush mounting sensor offering including mounting plates and frames‚ see product catalog chapter 6
Indoor air quality sensors for RXC..
Product Title
Data sheet
Stock No.
Product No.
Room air quality sensor CO2 / temperature / rel. Humidity / VOC
N1961
BPZ:QPA20..
QPA..
Base modules with integrated CO2 and VOC measurement
N1410
BPZ:AQR2548..
AQR2548..
Duct air quality sensor CO2/ temperature / rel. Humidity / VOC
N1962
BPZ:QPM21..
QPM..
For the complete flush mounting sensor offering including mounting plates and frames‚ see product catalog chapter 6
4-51
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Desigo RX
Communicating controllers - RXC (LonWorks)
Dewpoint sensors for RXC..
4
Product Title
Data sheet
Stock No.
Product No.
Condensation monitor‚ AC/DC 24 V
N3302
S55770-T325
QXA2601
Condensation monitor‚ AC/DC 24 V‚ with remote sensor head
(cable length 1.5 m)
N3302
S55770-T326
QXA2602
Condensation monitor‚ AC 230 V
N3302
S55770-T327
QXA2603
Condensation monitor‚ AC 230 V‚ with remote sensor head
(cable length 1.5 m)
N3302
S55770-T328
QXA2604
Product Title
Data sheet
Stock No.
Product No.
Air duct differential pressure sensor‚ DC 0...10 V
N1916_01
BPZ:QBM3020..
QBM3020..
Differential pressure sensor‚ DC 0...10 V
N1910_01
BPZ:QBM2030..
QBM2030..
Air duct differential pressure sensor with calibration certificate
N1919_01
BPZ:QBM400..
QBM400..
Product Title
Data sheet
Stock No.
Product No.
Electrothermal actuator‚ AC/DC 24 V‚ NC‚ 2P‚ PDM‚ PR
N4884
S55174-A115
STA73PR/00
Electrothermal actuator‚ AC/DC 24 V‚ NO‚ 2P‚ PDM‚ PR
N4884
S55174-A116
STP73PR/00
Electromotoric actuator‚ 100 N‚ 2.5/5 mm‚ 1.5 m‚ AC 24 V‚ 3P
N4893
BPZ:SSA81
SSA81
Electromotoric actuator‚ 200 N‚ 5.5 mm‚ AC 24 V‚ 1.5 m‚ 3P
N4891
BPZ:SSB81
SSB81
Electromotoric actuator‚ 160 N‚ 2.5 mm‚ 1.5 m‚ AC 24 V‚ 3P
N4864
BPZ:SSP81
SSP81
Differential pressure sensors for RXC..
Valve actuators for RXC..
For suitable combination of actuator STA.. and connection cable ASY..‚ see chapter introduction page 7-4 of the HVAC Catalog
Damper actuators for RXC..
Product Title
Data sheet
Stock No.
Product No.
Rotary air damper actuators 5 Nm‚ without spring return
N4634
BPZ:GDB..1E
GDB..1E
Linear air damper actuators 125 N‚ without spring return
N4664
BPZ:GDB..2E
GDB..2E
Rotary air damper actuators 10 Nm‚ without spring return
N4634
BPZ:GLB..1E
GLB..1E
Linear air damper actuators 250 N‚ without spring return
N4664
BPZ:GLB..2E
GLB..2E
Product Title
Data sheet
Stock No.
Product No.
Service unit with LCD
N3851
BPZ:RXT20.1
RXT20.1
Service units
NEW PRODUCT
4-52
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Room operator units
For controllers RX.. (PPS2): QAX3.. / QAX8..
Room unit with PPS2 interface
QAX3..
Room units for acquiring the room temperature and operation of individual room control.
Power consumption
Interface for controller
Interface for service
Sensing element‚ temperature
Measuring range‚ temperature
Time constant
Measurement accuracy
Setpoint readjustment range
Degree of protection
Mounting location
Mounting
0.10 VA
PPS2
LonWorks and PPS2 on RJ45
NTC
0...40 °C
L8 min
±0.25 K at 25 °C
±0.5 K at 5...30 °C
±12 K
IP30
Indoors
Directly on wall
In recessed or top-mounted conduit box
4
Room unit with sensor and PPS2 interface
QAX30.1
- Acquisition of room temperature
Data sheet
N1741
Voltage supply
Dimensions (W x H x D)
PPS2
90 x 100 x 32 mm
Stock No.
Product No.
BPZ:QAX30.1
QAX30.1
Room unit with sensor‚ setpoint adjuster and PPS2 interface
QAX31.1
- Acquisition of room temperature
- Setpoint adjuster for room temperature
Data sheet
N1741
Dimensions (W x H x D)
90 x 100 x 36 mm
Stock No.
Product No.
BPZ:QAX31.1
QAX31.1
Room unit with sensor‚ setpoint and operating mode selector and PPS2 interface
QAX32.1
- Acquisition of room temperature
- Setpoint adjuster for room temperature
- Rocker switch for mode selection (Off / Auto)
Data sheet
N1641
Dimensions (W x H x D)
90 x 100 x 36 mm
Stock No.
Product No.
BPZ:QAX32.1
QAX32.1
4-53
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Room operator units
For controllers RX.. (PPS2): QAX3.. / QAX8..
QAX33.1
Room unit with sensor‚ setpoint and operating mode selector‚ fan speed selection‚ and PPS2 interface
- Acquisition of room temperature
- Setpoint adjuster for room temperature
- Rocker switch for mode selection (Off/Auto) and for manual fan control with fan coil systems (up to 3
speeds)
Data sheet
N1642
Dimensions (W x H x D)
90 x 100 x 36 mm
4
QAX34.1
Stock No.
Product No.
BPZ:QAX33.1
QAX33.1
Room unit with sensor‚ setpoint and operating mode selector‚ display and PPS2
interface
- Acquisition of room temperature
- Rocker switch for adjustment of room temperature setpoint
- Rocker switch for mode selection (Off/Auto) and for manual fan control with fan coil systems (up to 3
speeds)
- LCD with display of room temperature and control mode
QAX34.3
Data sheet
N1645
Dimensions (W x H x D)
90 x 100 x 36 mm
Stock No.
Product No.
BPZ:QAX34.1
QAX34.1
Room unit with sensor‚ setpoint and operating mode selector‚ display and PPS2
interface
- Acquisition of room temperature
- Rocker switch for adjustment of room temperature setpoint
- Rocker switch for mode selection (Off/Auto) and for manual fan control with fan coil systems (up to 3
speeds)
- LCD with display of room temperature and control mode
- Together with the new RXB and RXL controllers for parameter setting
QAX39.1
Data sheet
N1640
Dimensions (W x H x D)
96 x 119 x 24 mm
Stock No.
Product No.
BPZ:QAX34.3
QAX34.3
Universal setpoint adjuster with PPS2 interface
- Setpoint adjuster for room temperature
Data sheet
N1646
Dimensions (W x H x D)
48 x 48 x 15 mm
Stock No.
Product No.
BPZ:QAX39.1
QAX39.1
4-54
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Room operator units
For controllers RX.. (PPS2): QAX3.. / QAX8..
Flush-mounted room unit complete with PPS2 interface and design frame
QAX84.1/PPS2
The set consists of:
- Operator unit‚
- PPS2 bus coupling unit and
- Design frame DELTA line in titanium white.
Functionality:
- Acquisition of room temperature
- Switch for adjustment of room temperature setpoint
- Switch for mode selection (Off/Auto) and for manual fan control with fan coil systems (up to 3 speeds)
- LCD with display of room temperature and control mode
Data sheet
N1649
Voltage supply
Measuring range‚ temperature
Sensing element‚ temperature
Mounting
Degree of protection
Dimensions (W x H x D)
PPS2
0...40 °C
NTC
Flush or wall-mounted conduit box
IP30
80 x 80 x 30.5 mm
4
Stock No.
Product No.
BPZ:QAX84.1/PPS2
QAX84.1/PPS2
4-55
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Room operator units
For controllers RX.. and room automation (BACnet) (EnOcean and wireless)
QAX95.4
Room unit with EnOcean interface
V
V
V
V
V
Acquisition of the room temperature
Powered by solar cell
A gateway is mandatory (EnOcean / KNX)
Optional use of battery if light conditions are insufficient
Including design frame DELTA line‚ titan white
For use with units from the following product ranges:
- RXB (together with gateway EnOcean/KNX‚ RXZ97.1/KNX)
- Devices with KNX Communication
4
QAX96.4
Data sheet
N1663
Voltage supply
Measuring range‚ temperature
Measurement accuracy
Time constant
Degree of protection
Dimensions (W x H x D)
Weight
Solar cell
0…50 °C
±0.4 K
L16 min
IP30
55 x 55 x 19 mm
0.05 kg
Stock No.
Product No.
S55623-H104
QAX95.4
Room unit with EnOcean interface‚ setpoint adjuster
V
V
V
V
V
V
Acquisition of the room temperature
Room temperature setpoint adjustment
Powered by solar cell
A gateway is mandatory (EnOcean / KNX)
Optional use of battery if light conditions are insufficient
Including design frame DELTA line‚ titan white
For use with units from the following product ranges:
- RXB (together with gateway EnOcean/KNX‚ RXZ97.1/KNX)
- Devices with KNX Communication
Data sheet
N1663
Voltage supply
Measuring range‚ temperature
Measurement accuracy
Time constant
Setpoint readjustment range
Degree of protection
Dimensions (W x H x D)
Weight
Solar cell
0…50 °C
±0.4 K
L16 min
±10 K
IP30
55 x 55 x 28 mm
0.05 kg
Stock No.
Product No.
S55623-H105
QAX96.4
4-56
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Room operator units
For controllers RX.. and room automation (BACnet) (EnOcean and wireless)
Room unit with EnOcean interface‚ setpoint adjuster‚ button and switch
V
V
V
V
V
V
V
V
QAX97.4
Acquisition of the room temperature
Room temperature setpoint adjustment
Freely-programmable button
Step switch (2 stages)
Powered by solar cell
A gateway is mandatory (EnOcean / KNX)
Optional use of battery if light conditions are insufficient
Including design frame DELTA line‚ titan white
For use with units from the following product ranges:
- RXB (together with gateway EnOcean/KNX‚ RXZ97.1/KNX)
- Devices with KNX Communication
Data sheet
N1663
Voltage supply
Measuring range‚ temperature
Measurement accuracy
Time constant
Setpoint readjustment range
Degree of protection
Dimensions (W x H x D)
Weight
Solar cell
0…50 °C
±0.4 K
L16 min
±10 K
IP30
55 x 55 x 28 mm
0.05 kg
4
Stock No.
Product No.
S55623-H106
QAX97.4
Room unit with EnOcean interface‚ setpoint adjuster‚ button and switch for fan
stages
V
V
V
V
V
V
V
V
QAX98.4
Acquisition of the room temperature
Room temperature setpoint adjustment
Freely-programmable button
Step switch (5 stages)
Powered by solar cell
A gateway is mandatory (EnOcean / KNX)
Optional use of battery if light conditions are insufficient
Including design frame DELTA line‚ titan white
For use with units from the following product ranges:
- RXB (together with gateway EnOcean/KNX‚ RXZ97.1/KNX)
- Devices with KNX Communication
Data sheet
N1663
Voltage supply
Measuring range‚ temperature
Measurement accuracy
Time constant
Setpoint readjustment range
Degree of protection
Dimensions (W x H x D)
Weight
Solar cell
0…50 °C
±0.4 K
L16 min
±10 K
IP30
55 x 55 x 28 mm
0.05 kg
Stock No.
Product No.
S55623-H107
QAX98.4
4-57
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Room operator units
For controllers RX.. and room automation (BACnet) (EnOcean and wireless)
RXZ95.1/LON
Radio frequency receiver with Gateway EnOcean/LonWorks‚ AC / DC 24 V‚
external antenna
V Wireless receiver with LonWorks® interface FTT10A
V Evaluation of up to 9 EnOcean room units (room temperature and setpoint adjustment)
For use with:
- Desigo RXC
- Devices / systems with LonWorks® communication
An external antenna is included in the delivery.
4
Data sheet
N1661
Operating voltage
DC 24 V
AC 24 V
LonWorks bus (LPT10)
0.82 VA
-20…60 °C
<70 % r.H.
IP42
58 x 78 x 46 mm
0.173 kg
Voltage supply
Power consumption
Ambient temperature‚ operation
Ambient humidity‚ operation
Degree of protection
Dimensions (W x H x D)
Weight
RXZ97.1/KNX
Stock No.
Product No.
S55842-Z100
RXZ95.1/LON
Radio frequency receiver with Gateway EnOcean/KNX
V Evaluation of up to 32 EnOcean channels
V With RXB‚ other EnOcean functions may also be integrated: switches‚ window contacts‚ motion detectors
V Other EnOcean functions (dimming‚ blinds‚ light sensors) can be realized in KNX systems
V Powered via KNX bus
V With internal antenna
Data sheet
N1662
Operating voltage
Voltage supply
Power consumption
Ambient temperature‚ operation
Ambient humidity‚ operation
Degree of protection
Dimensions (W x H x D)
Weight
DC 24 V
KNX bus
0.6 VA
-5…45 °C
5…93 % r.H.
IP20
71 x 71 x 27 mm
0.07 kg
Stock No.
Product No.
S55842-Z101
RXZ97.1/KNX
4-58
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Room operator units
For communicating controller - RXC (LonWorks) QAX5..
QAX5..
Versatile room units with LonWorks interface
Versatile room units with LonWorks bus communication.
- Acquisition of room temperature
- Buttons for adjustment of room temperature setpoint
- Rocker switch for selecting the HVAC operating state (Off / Auto) and for manual fan speed control
with fan coil systems (up to 3 speeds)
- LCD with display of room temperature and operating state
- Configurable keypad for operation of lighting and blinds
- LonMark-compatible bus communication
Data sheet
N1648
Voltage supply
Communication
Mounting location
Mounting
LonWorks bus (LPT10)
Bus: LonWorks
Indoors
Directly on wall
In recessed or top-mounted conduit box
80 x 187 x 20 mm
Dimensions (W x H x D)
4
Versatile room unit with LonWorks interface‚ lighting systems (on / off)
QAX50.5/C000
For operating HVAC systems and controlling lighting systems (on / off) and blinds.
Data sheet
N1648
Stock No.
Product No.
S55623-H114
QAX50.5/C000
Versatile room unit with LonWorks interface‚ lighting systems (dimmed)
QAX51.5/C000
For operating HVAC systems and controlling lighting systems (dimmed) and blinds.
Data sheet
N1648
Stock No.
Product No.
S55623-H115
QAX51.5/C000
4-59
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation
Service unit
For controller RXC..
RXT20.1
Service unit with LCD
Data sheet
N3851
Voltage supply
Power consumption
Ambient temperature‚ operation
Weight
PPS2
0.1 VA
0...50 °C
0.13 kg
Stock No.
Product No.
BPZ:RXT20.1
RXT20.1
4
4-60
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard Controllers
5
Overview and selection tool
Communicative HVAC controllers
Software and central communication units
Product range overview
5-2
Overview of product details
5-4
Heating controllers RMH..
5-9
Extension modules for RMH..
5-11
Boiler sequence controllers RMK..
5-12
Extension modules and operator units for RMH.. and RMK..
5-14
Application examples RMH.. / RMK..
5-16
Field devices for RMH.. and RMK..
5-21
Universal controllers RMU..
5-22
Application examples RMU..
5-24
Switching and monitoring device RMS..
5-33
Extension modules and operator units for RMU.. and RMS..
5-35
Field devices for RMU.. and RMS..
5-37
For web and remote operation via KNX: OZW77..
5-41
For HVAC plants: ACS790 / OCI700.1
5-45
Standard Controllers
Overview and selection tools
Product range overview
One system for all
types of applications
Synco tool
For commissioning and diagnostics
PC with
ACS software
5
Synco operating –
efficient operation of plant with
straightforward remote control
Thanks to Synco’s Web server, plant operation and monitoring can be effected from
a PC or smartphone at any time and from
any location. An alarm system delivers
fault status or maintenance messages in
due time, also via SMS or e-mail, if required. The app allows your customers operation from underway or from the sofa.
Synco tool – support functions for
quick commissioning
To facilitate commissioning, the Synco
tool offers you a host of help functions
and choices: Diagnostics including trending, for example, straightforward fault
tracing thanks to access to all data points
of all controllers, saving all settings on the
PC, or printing commissioning reports.
Simple concept for opening
communication
With Synco, opening and starting communication is child’s play: Simply interconnect the units, activate the bus power
supply on the controller and set the device address. All relevant settings can be
made directly via local operation.
Open data exchange via KNX
standard bus, irrespective of supplier
The KNX standard bus facilitates interconnections of HVAC, lighting and blind control, for instance, regardless of the supplier – for simultaneous control of the
ventilation system and of lighting via
presence detectors, for example.
Control and switching unit for heating,
ventilation and air conditioning plants
Synco 700
Universal controllers
RMU710
modular universal controller,
1 control loop
RMU720
modular universal controller,
2 control loops
RMU730
modular universal controller,
3 control loops
RMS705
switching and monitoring device
Universal extension modules
(for all types of controllers)
RMZ785
universal module
RMZ787
universal module
RMZ788
universal module
Operator units (for all types of controllers)
RMZ790
plug-in type operator unit
RMZ791
detached operator unit (3 m)
RMZ792
bus operator unit
Field devices
GDB181.1E/KN VAV compact controller (5 Nm)
GLB181.1E/KN VAV compact controller (10 Nm)
5-2
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Standard Controllers
Overview and selection tools
Product range overview
Synco operating
Efficient operation of plant including alarm reporting
Mobile
phone
Smartphone
PC with
Web browser
Internet/Intranet
Standard
Modem gateway
The worldʼs only open
standard for home
and building control –
ISO/IEC 14543-3
5
Central control unit and room controller
for individual room climate
Control and switching unit for heating,
ventilation and air conditioning plants
Synco RXB/RXL room controllers, Synco RDG/RDF/RDU room thermostats
Heating controllers
RMH760 modular heating controller
RMK770 boiler sequence controller
Central control unit
RMB795
– Central control unit for room controllers
Extension modules for heating
controllers
RMZ782 heating circuit module
RMZ783 DHW module
RMZ787 universal module
RMZ789 universal module
Room controllers
RXB21.1, RXL21.1, RXB22.1,
RXL22.1, RXB39.1, RXL39.1
– Fan coil units
RXB24.1, RXL24.1
– Chilled ceiling or radiator
Room unit
QAW740 room unit
Synco operating
OZW771 central communication unit
OZW772 Web server (Ethernet)
Room thermostats
RDG100KN, RDG160KN
– Fan coil units
– Universal system, chilled/heated
ceiling and radiator
– Heat pump systems
RDG400KN
– Variable air volume system
RDF301, RDF301.50, RDF600KN
– Fan coil units
– Heat pump systems
– Semi flush mount
RDU341
– Variable air volume system
– Semi flush mount
Synco tool
OCI700.1 service tool
ACS790 commissioning software
5-3
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Standard Controllers
Overview and selection tools
Overview of product details
785
787
788
782
783
789
Modular universal controller,
1 control loop
Modular universal controller,
2 control loops
Modular universal controller,
3 control loops
Switching and Monitoring
Device
Universal module,
8UI
Operation
KNX communication
7-day time switch and holiday/
special day program
Supervision
Logic functions
Outputs
Step switch
Relay
3-position
DC 0...10 V
Universal inputs
T1
Pt1000
DC 0...10 V
Digital
LG-Ni 1000
Number of universal inputs
Controlled variable
Universal
Temperature °C
■1)
■1)
■1)
■1)
■1)
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
3
5
4
2
1
1
2
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
7
2
4
6
6
2
2
2
3
4
4
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
6
8
8
8
■
■
■
■
■
■
■
■
■
Control loops
Cascade
Number
■
■
■
■
3
1
2
3
Optional operation:
RMZ790: Plug-in operator unit
RMZ791: Detached operator unit
RMZ792: Bus operator unit
2
■
5
■
1)
4
■
Control mode
PID
P/PI
■
RMZ..
Universal module,
6UI, 2AO, 4DO
RMS..
705
DHW module
4UI, 5DO, 1AO
730
Heating circuit module
3UI, 3DO, 1AO
RMU..
720
Universal module,
4UI, 2DO, 2AO
710
Universal module,
4UI, 4DO
RMK..
770
Boiler sequence controller
5
RMH..
760
Modular heating controller
max. 3 heating circuit
Overview HVAC controller
8
4
4
3
4
6
3
AO Analog output
DO Digital output
UI Universal inputs
5-4
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Standard Controllers
Overview and selection tools
Overview of product details
Overview standard systems
Communication
KNX
Standard systems for:
Heating, ventilation or
air conditioning
Communication central unit
OZW771..
OZW772..
Software
ACS790
Service Tool
OCI700.1
Heating controllers
Synco™
■ RMH760 Heating controllers
■ RMK770 Boiler sequence controllers
Ventilation and air conditioning
controllers
Synco™ series
■ RMU700 Universal controllers
Switching and Monitoring Device
Synco™
■ RMS705
Room controllers
Synco™
■ RMB795
■ RXB / RXL Room controllers
Thermostats
Synco™
■ RDF301, RDF301.50, RDF600KN
■ RDG100KN, RDG160KN, RDG400KN
■ RDU341
5
5-5
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Standard Controllers
Overview and selection tools
Overview of product details
KNX system
Standard systems for heating, ventilation or air conditioning Synco™ (KNX)
Low engineering system to easily build complex applications with flexible and modular combinations of standard controllers Synco™ 700.
Standard Systems for HVAC plants are capable to be remote operated and can generate alarms to service centers. Full control without extensive engineering.
5
Communication central units
Device versions
No. of comm. devices
1)
OZW772
OZW772.01
OZW772.04
OZW772.16
OZW772.250
1
4
16
250
Plant operation
ACS software
Web Browser
Interface
Yes
Yes
Ethernet, USB
Alarming
Max. message receivers
ACS alarm via PC
Fax
Pager
SMS
e-Mail
4
No
No
No
No
Yes (Ethernet)
Offline trend function
Yes
Digital inputs (potential free)
Universal inputs (UI)
As alarm input
As pulse counter
As counter (operating hours)
None
None
No
No
No
Digital output
None
Local device operation
Button / Switch
Bus power supply
No
General device data
Operating voltage
Frequency
Power consumption
Degree of protection
1)
AC 230 V ±10 %
50/60 Hz
3 VA
IP30
Synco™ controller series 700, QAW740, RXB / RXL, RDG, RDF, RDU, Synco™ living QAX9..
5-6
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Standard Controllers
Overview and selection tools
Overview of product details
KNX system
Standard systems for heating, ventilation or air conditioning Synco™ (KNX)
Low engineering system to easily build complex applications with flexible and modular combinations of standard controllers Synco™ 700.
Standard Systems for HVAC plants are capable to be remote operated and can generate alarms to service centers. Full control without extensive engineering.
5
Communication central units
Device versions
No. of comm. devices
1)
OZW771
OZW771.04
OZW771.10
OZW771.64
4
10
64
Plant operation
ACS software
Web Browser
Interface
Yes
No
RS232
Alarming
Max. message receivers
ACS alarm via PC
Fax
Pager
SMS
e-Mail
2
Yes
with SMS via GSM
Yes
Yes
with SMS via GSM
Offline trend function
No
Digital inputs (potential free)
Universal inputs (UI)
As alarm input
As pulse counter
As counter (operating hours)
2
Yes
No
No
None
Digital output
Local device operation
Button / Switch
Bus power supply
No
General device data
Operating voltage
Frequency
Power consumption
Degree of protection
1)
2)
AC 230 V ±10 %
50/60 Hz
5 VA
IP20 2)
Synco™ controller series 700, QAW740, RXB / RXL, RDG, RDF, RDU, Synco™ living QAX9..
IP30 with terminal covers
5-7
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Notes
5
5-8
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Heating controllers RMH..
Heating controller
RMH760B..
- Heating controller as primary controller or main controller (district heat) or heating circuit controller
- Boiler temperature control
- Control of max. 3 heating circuits and DHW heating (7 variants available) with optional extension
modules
- Tested‚ predefined applications (refer to Application Catalog)
- Flexible configuration
- Clear-text operation with separate operator unit (plug-in type or detached)
- Integrated KNX bus communication
- No commissioning tool required
Extension modules complement the Synco 700 heating controller and offer extra functions. Controller
and extension modules are interconnected via plug-in connectors. The extension modules are attached
to the controller and do not operate autonomously. Full operation from commissioning to enduser operation via the operator unit.
Available extension modules:
2 heating circuit modules RMZ782B
1 DHW module RMZ783B
1 universal module RMZ787
2 universal modules RMZ789
A total of 4 extension modules can simultaneously be used with the Synco 700 heating controller.
5
Available operator units:
- Plug-in type operator unit RMZ790
- Detached operator unit RMZ791
- Bus operator unit RMZ792
Data sheet
N3133
Operating voltage
Frequency
Power consumption
Universal inputs‚ number
Universal input‚ signal
AC 24 V
50/60 Hz
12 VA
6
LG-Ni1000
2 x LG-Ni1000
T1 (PTC)
Pt1000
NTC 575
0...1000 Ohm
1000...1175 Ohm
DC 0...10 V
Digital pulse contact
Potential-free digital status contact
2
DC 0...10 V
Max. 1 mA
5
Potential-free switching contact
AC 19...250 V
4 (3) A
KNX (KNX TP1)
Analog outputs‚ number
Analog output‚ signal
Analog output‚ current
Relay outputs‚ number
Relay outputs
Relay output‚ switching voltage
Relay output‚ switching current
Communication
5-9
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Heating controllers RMH..
Range overview RMH760B..
Product Title
Data sheet
Stock No.
Product No.
Heating controller with languages de‚ fr‚ it‚ es
N3133
BPZ:RMH760B-1
RMH760B-1
Heating controller with languages de‚ en‚ fr‚ nl
N3133
BPZ:RMH760B-2
RMH760B-2
Heating controller with languages da‚ fi‚ sv‚ no
N3133
BPZ:RMH760B-3
RMH760B-3
Heating controller with languages pl‚ cs‚ sk‚ hu‚ ru‚ bg
N3133
BPZ:RMH760B-4
RMH760B-4
Heating controller with languages sr‚ hr‚ sl‚ ro‚ el‚ tr
N3133
BPZ:RMH760B-5
RMH760B-5
5
5-10
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Extension modules for RMH..
Heating circuit module
RMZ782B
- Weather-compensated flow temperature control via heating circuit's mixing valve
- Control of heating circuit pump
The available heating circuit control and supervisory functions are the same as those of the RMH760B
Data sheet
N3136
Voltage supply
Power consumption
Universal inputs‚ number
Universal input‚ signal
Supply from controller module
2 VA
3
LG-Ni1000
0...1000 Ohm
1000...1175 Ohm
DC 0...10 V
Pt1000
NTC 575
T1 (PTC)
1
DC 0...10 V
Max. 1 mA
3
Switching contact‚ potential-free
AC 19…250 V
4 (3) A
Analog outputs‚ number
Analog output‚ signal
Analog output‚ current
Relay outputs‚ number
Relay outputs
Relay output‚ switching voltage
Relay output‚ switching current
5
Stock No.
Product No.
BPZ:RMZ782B
RMZ782B
DHW module
-
RMZ783B
Control of the storage tank temperature
Storage tank charging with integrated coil‚ with pump or mixing valve
Storage tank charging with detached heat exchanger‚ with pump and mixing valve
Storage tank charging according to a time program
Control of the circulating pump according to a time program
The technical data correspond to the heating circuit module RMZ782B‚ except:
Data sheet
N3136
Universal inputs‚ number
Analog outputs‚ number
Relay outputs‚ number
4
1
5
Stock No.
Product No.
BPZ:RMZ783B
RMZ783B
5-11
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Boiler sequence controllers RMK..
RMK770..
Boiler sequence controller
Modular heating controller with integrated control and supervisory functions for:
- Up to 6 boilers
- Multistage or modulating burners
- Precontrol
- Heating circuit
- Tested‚ predefined applications (refer to Application Catalog)
- Flexible configuration
- Clear-text operation with separate operator unit (plug-in type or detached)
- Integrated KNX bus communication
- No commissioning tool required
Extension modules complement the Synco 700 boiler sequence controller and offer extra functions. The
extension modules are attached to the controller. They do not operate autonomously. Full operation
from commissioning to enduser operation via the operator unit.
Available extension modules:
3 universal modules RMZ785
3 universal modules RMZ787
3 universal modules RMZ788
3 universal modules RMZ789
5
A total of 3 extension modules can simultaneously be used with the Synco 700 boiler sequence controller.
Available operator units:
- Plug-in type operator unit RMZ790
- Detached operator unit RMZ791
- Bus operator unit RMZ792
Data sheet
N3132
Operating voltage
Frequency
Power consumption
Universal inputs‚ number
Universal input‚ signal
AC 24 V
50/60 Hz
12 VA
8
0...1000 Ohm
1000...1175 Ohm
2 x LG-Ni1000
DC 0...10 V
Potential-free digital status contact
LG-Ni1000
Pt1000
T1 (PTC)
2
Potential-free input signal
5 mA
DC 15 V
2
DC 0...10 V
Max. 1 mA
7
AC 19...265 V‚ max. 4(3) A
Potential-free switching contact
KNX (KNX TP1)
Digital inputs‚ number
Digital inputs
Digital input‚ contact query
Analog outputs‚ number
Analog output‚ signal
Analog output‚ current
Relay outputs‚ number
Relay outputs
Communication
5-12
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Boiler sequence controllers RMK..
Range overview RMK770..
Product Title
Data sheet
Stock No.
Product No.
Boiler sequence controller with languages de‚ fr‚ it‚ es
N3132
BPZ:RMK770-1
RMK770-1
Boiler sequence controller with languages de‚ fr‚ en‚ nl
N3132
BPZ:RMK770-2
RMK770-2
Boiler sequence controller with languages da‚ fi‚ sv‚ no
N3132
BPZ:RMK770-3
RMK770-3
Boiler sequence controller with languages pl‚ cs‚ sk‚ hu‚ ru‚ bg
N3132
BPZ:RMK770-4
RMK770-4
Boiler sequence controller with languages sr‚ hr‚ sl‚ ro‚ el‚ tr
N3132
BPZ:RMK770-5
RMK770-5
5
5-13
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Extension modules and operator units for RMH.. and RMK..
RMZ790
Plug-in type operator unit
-
Operator unit plugs into the Synco™ 700 controllers
For displaying and changing plant data for service staff and enduser
Clear-text operation
Can be plugged in and removed during operation
Power supply via the controller
Data sheet
RMZ791
N3111
Stock No.
Product No.
BPZ:RMZ790
RMZ790
Detached operator unit with 3 m cable
Like plug-in type operator unit‚ but:
- Other mounting choices (typically for control panel door or wall mounting)
- Larger display
- Connection via a prefabricated 3 m cable‚ supplied as standard
5
Data sheet
RMZ792
N3112
Stock No.
Product No.
BPZ:RMZ791
RMZ791
Bus operator unit
Communicating operator unit for operating up to 150 controllers‚ room units and central units from the
Synco™ 700 range via KNX bus.
Favorite pages can be freely defined. Designed for fixed installation or mobile use.
Data sheet
RMZ78..
N3113
Stock No.
Product No.
BPZ:RMZ792
RMZ792
Universal modules
Additional inputs and outputs required by the Synco™ 700 controllers can be provided by these modules. A description of the functions is given with the relevant controller module.
Data sheet
N3146
Power consumption
Universal input‚ signal
2 VA
0...1000 Ohm
1000...1175 Ohm
2 x LG-Ni1000
DC 0...10 V
Potential-free digital status contact
LG-Ni1000
Pt1000
T1 (PTC)
DC 0...10 V
Max. 1 mA
switching contact‚ potential-free
AC 19...265 V
4 (3) A
Analog output‚ signal
Analog output‚ current
Relay outputs
Relay output‚ switching voltage
Relay output‚ switching current
5-14
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Extension modules and operator units for RMH.. and RMK..
Range overview RMZ78..
Universal inputs‚ number
Analog outputs‚ number
Relay outputs‚ number
Stock No.
Product No.
8
0
0
BPZ:RMZ785
RMZ785
4
0
4
BPZ:RMZ787
RMZ787
4
2
2
BPZ:RMZ788
RMZ788
6
2
4
BPZ:RMZ789
RMZ789
Module connector
RMZ780
Module connector for detached mounting of extension modules within the control panel.
Distance for detached mounting: Maximum 10 m.
Data sheet
N3138
5
Stock No.
Product No.
BPZ:RMZ780
RMZ780
5-15
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Application examples RMH.. / RMK..
Application examples RMH760B.. and RMK770..
These are only a few examples of many applications that can be done with the
with Synco™700 controllers: RMH760B.. / RMK770..
More Synco™700 applications are described in “HIT“ (the HVAC project engineering tool with a library of over 300 pre-configured HVAC-applications) and in the
RMH760B.. / RMK770.. data sheet.
The evaluation of the energy efficiency classification is based on EN15232:2007.
For a determination of the energy efficiency classification of the application‚
please use the "HIT Tool".
Further details are available in the manual "Building automation - impact on
energy efficiency" in our HIT Online.
www.siemens.com/hit
RMH760B..
5
Weather-compensated heating control‚ one heating circuit‚
d.h.w
H0CB02 H6B HQ
V Weather-compensated flow temperature control with adjustable setpoints for
Comfort‚ Precomfort‚ Econo-my and Protective Mode
V Frost protection for the building and the plant
V Changeover between 3 room temperature setpoints according to the time
switch program
V Yearly clock
V Holiday and special day program with up to 16 periods
V 7-day program (maximum six switching points per day)
V Time switch program for the heating circuit
V Limitation of the flow temperature
V Automatic heating limit with adjustable limits
V Optimum start control
V Quick setback
V Control of the storage tank charging temperature with adjustable setpoints
for Normal‚ Reduced‚ Legionella and Protective mode
V Time switch program for DHW heating
The indicated energy efficiency classification can be attained only if the following functions are implemented:
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
V Integrated individual room control including demand control “by occupancy‚
air quality‚ etc.” (Heating circuits for precontrol in individual room control)
V Indoor temperature control (Room temperature in individual room control via
KNX requires extra configuration)
V Variable speed pump control with constant ap (The pump must have integrated output control)
V Variable temperature depending on the load (Heat demand signal required)
5-16
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Application examples RMH.. / RMK..
Weather-compensated heating control‚ heat generation‚ 2
heating circuits‚ d.h.w.
V Weather-compensated flow temperature control with adjustable setpoints for
Comfort‚ Precomfort‚ Economy and Protective Mode
V Frost protection for the building and the plant
V Changeover between 3 room temperature setpoints according to the time
switch program
V Yearly clock
V Holiday and special day program with up to 16 periods
V 7-day program (maximum six switching points per day)
V Time switch programs for heating circuits 1 and 2
V Limitation of the flow temperature
V Automatic heating limit with adjustable limits
V Optimum start control
V Quick setback
V Control of the storage tank temperature with adjustable setpoints for Normal‚
Reduced‚ Legionella and Protective mode
V Time switch program for DHW heating
V Demand-compensated boiler temperature control
V Protective boiler startup by reducing the consumer setpoints
V Control of a single-stage or 2-stage burner
V Control of the boiler temperature via modulating burner with DC 0…10 V control
V Burner fault contact
RMH760B..
HCDA01 H6B HQ
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
5
The indicated energy efficiency classification can be attained only if the following functions are implemented:
V Integrated individual room control including demand control “by occupancy‚
air quality‚ etc.” (Heating circuits for precontrol in individual room control)
V Indoor temperature control (Room temperature in individual room control via
KNX requires extra configuration)
V Variable speed pump control with constant ap (The pump must have integrated output control)
V enerator; Variable temperature depending on the load
Boiler cascade‚ 2 boilers with 2-stage burners
RMK770..
K2.2
V
V
V
V
Control of the boiler temperature via 2-stage burner
Control of the shutoff valves
Common flow and return temperature control
Control of the main pump
5-17
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Application examples RMH.. / RMK..
RMK770..
Boiler cascade‚ 2 boilers with 2-stage burners
K6.2
V Control of the boiler temperature via 2-stage burner
V Controlled boiler return temperature with 3-port valve and 3-position or DC
0…10 V actuator
V Control of the boiler pumps
V Common flow and return temperature control
V Extension module RMZ789 needed
Dual-boiler plant‚ boiler pumps‚ boiler return with 3-port
valve
RMK770..
5
HFF003 MK7 HQ
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
V Control of the boiler sequence
V Automatic changeover of lead boiler depending on the number of boiler operating hours
V Control of the boiler pumps
V Control of the boiler temperature via modulating burner with 3-position or DC
0…10 V control
V Burner fault contact
V Limitation of the burner’s minimum on time
V Controlled maintained boiler return temperature with 3-port valve and 3-position or DC 0…10 V actuator
V Protective boiler startup
V Maximum and minimum limitation of the boiler tempe-rature
V Selection of boiler operating mode
V Flue gas measuring mode‚ boiler testing mode
V Burner hours run and burner startup counter
V Minimum and maximum limitation of the flow tempera-ture
V Automatic changeover to summer operation
V (heating OFF)
V Pump overrun‚ pump kick
V Valve overrun‚ valve kick
V Acquisition and evaluation of heat requisition signals via Konnex bus
The indicated energy efficiency classification can be attained only if the following functions are implemented:
In connection with an application that fulfils the energy efficiency class B‚ necessary for:
V Emission control
V Control of distribution network hot watertemperature (supply or return)
V Control of distribution pumps
V Intermittent control of emission and/or distribution
5-18
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Application examples RMH.. / RMK..
Weather-compensated heating system‚ district heating connection‚ 2 heating circuits‚ d.h.w
V Weather-compensated flow temperature control with adjustable setpoints for
Comfort‚ Precomfort‚ Economy and Protective mode
V Frost protection for the building and the plant
V Changeover between 3 room temperature setpoints according to the time
switch program
V Yearly clock
V Holiday and special day program with up to [SoftReturn]16 periods
V 7-day program (maximum six switching points [SoftReturn]per day)
V Time switch programs for the heating circuits
V Control of the storage tank charging temperature with adjustable setpoints
for Normal‚ Reduced‚ Legionella and Protective mode
V Time switch program for DHW heating
V Limitation of the flow temperature
V Automatic heating limit with adjustable limits
V Optimum start control
V Quick setback
V Demand-compensated primary control
RMH760B..
DADC04 H6B HQ
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
5
The indicated energy efficiency classification can be attained only if the following functions are implemented:
V Integrated individual room control including demand control “by occupancy‚
air quality‚ etc.” (Heating circuits for precontrol in individual room control)
V Indoor temperature control (Room temperature in individual room control via
KNX requires extra configuration)
V Variable speed pump control with constant ap (The pump must have integrated output control)
V Intermittent control of emission and/or distribution‚ automatic control with
optimum start/stop
V Generator; Variable temperature depending on the load
5-19
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Application examples RMH.. / RMK..
RMH760B..
Weather-compensated heating system‚ district heating connection‚ 2 heating circuits‚ d.h.w
DADC04 H6B HQ
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
5
V Weather-compensated flow temperature control with adjustable setpoints for
Comfort‚ Precomfort‚ Economy and Protective mode
V Frost protection for the building and the plant
V Changeover between 3 room temperature setpoints according to the time
switch program
V Yearly clock
V Holiday and special day program with up to [SoftReturn]16 periods
V 7-day program (maximum six switching points [SoftReturn]per day)
V Time switch programs for the heating circuits
V Control of the storage tank charging temperature with adjustable setpoints
for Normal‚ Reduced‚ Legionella and Protective mode
V Time switch program for DHW heating
V Limitation of the flow temperature
V Automatic heating limit with adjustable limits
V Optimum start control
V Quick setback
V Demand-compensated primary control
The indicated energy efficiency classification can be attained only if the following functions are implemented:
V Integrated individual room control including demand control “by occupancy‚
air quality‚ etc.” (Heating circuits for precontrol in individual room control)
V Indoor temperature control (Room temperature in individual room control via
KNX requires extra configuration)
V Variable speed pump control with constant ap (The pump must have integrated output control)
V Intermittent control of emission and/or distribution‚ automatic control with
optimum start/stop
V Generator; Variable temperature depending on the load
5-20
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Field devices for RMH.. and RMK..
Sensors‚ setpoint adjusters
Product Title
Data sheet
Stock No.
Product No.
Outside sensor LG-Ni1000
N1811
BPZ:QAC22
QAC22
Outside sensor NTC 575 Ohm
N1811
BPZ:QAC32
QAC32
Strap-on temperature sensor LG-Ni1000
N1801
BPZ:QAD22
QAD22
Strap-on temperature sensor with cable LG-Ni1000
N1802
BPZ:QAD26.220
QAD26.220
Immersion temperature sensor 100 mm LG-Ni1000‚ with protection pocket
N1781
BPZ:QAE2120.010
QAE2120.010
Cable temperature sensor PVC 2 m‚ LG-Ni1000
N1831
BPZ:QAP22
QAP22
Solar sensor
N1943
BPZ:QLS60
QLS60
Setpoint adjuster‚ passive‚ scale 0...50 °C (exchangeable)
N1991
BPZ:BSG21.1
BSG21.1
Flue gas temperature sensor Pt1000
N1846
BPZ:FGT-PT1000
FGT-PT1000
5
Monitors
Product Title
Data sheet
Stock No.
Product No.
Flow switch for use in hydraulic systems‚ PN10‚ DN32...200
N1592
BPZ:QVE1900
QVE1900
Thermal reset limit thermostat
N1202
BPZ:RAK-TW.1..H
RAK-TW.1..H
Temperature limiter
N1206
BPZ:RAK-TB.1..M
RAK-TB.1..M
Safety limit thermostat
N1204
BPZ:RAK-ST..M
RAK-ST..M
Product Title
Data sheet
Stock No.
Product No.
Room temperature sensor LG-Ni1000
N1721
BPZ:QAA24
QAA24
Room unit with room temperature sensor and setpoint readjuster -3…3 K
N1721
BPZ:QAA27
QAA27
Room temperature sensor LG-Ni1000 for mounting on recessed
conduit boxes
N1722
BPZ:QAA64
QAA64
Room unit with KNX bus
N1633
BPZ:QAW740
QAW740
Product Title
Data sheet
Stock No.
Product No.
Transformers
N5536
BPZ:SEM62..
SEM62..
Product Title
Data sheet
Stock No.
Product No.
Service tool for KNX / LPB
N5655
BPZ:OCI700.1
OCI700.1
Room units
Transformers
Service tool
5-21
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Universal controllers RMU..
RMUB..
Universal controller
-
Universal controllers with integrated control and supervisory functions
Tested‚ predefined applications (refer to Application Catalog)
Flexible configuration
Suited for the controlled variables temperature‚ relative / absolute humidity‚ pressure / differential‚ air
flow rate‚ indoor air quality‚ etc.
Autonomous sequence controllers with P‚ PI or PID mode
Functions can be extended (extension modules)
Clear-text operation with separate operator unit (plug-in type or detached)
Integrated KNX bus communication
No commissioning tool required
Extension modules complement the Synco 700 universal controllers and offer extra functions. The
extension modules are attached to the controller. Full operation from commissioning to enduser operation via the operator unit.
Available extension modules:
- 1 universal module RMZ785
- 2 universal modules RMZ787
- 2 universal modules RMZ788
5
Total maximal 4 extension modules per RMU7..B can be connected.
Available operator units:
- Plug-in type operator unit RMZ790
- Detached operator unit RMZ791
- Bus operating unit RMZ792
Data sheet
N3150
Operating voltage
Frequency
Power consumption
Universal input‚ signal
AC 24 V
50/60 Hz
12 VA
LG-Ni1000
2 x LG-Ni1000
T1 (PTC)
Pt1000
0...1000 Ohm
1000...1175 Ohm
DC 0...10 V
Digital pulse contact
Potential-free digital status contact
DC 0...10 V
Max. 1 mA
Potential-free switching contact
AC 19...250 V
4 (3) A
KNX (KNX TP1)
173 x 90 x 80 mm
Analog output‚ signal
Analog output‚ current
Relay outputs
Relay output‚ switching voltage
Relay output‚ switching current
Communication
Dimensions (W x H x D)
5-22
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Universal controllers RMU..
Range overview RMU7..B..
Universal inputs‚ Analog outputs‚
number
number
Relay outputs‚
number
Control loops‚
number
Loaded
languages
Stock No.
Product No.
6
2
2
1
de‚ fr‚ it‚ es
BPZ:RMU710B-1
RMU710B-1
6
2
2
1
de‚ en‚ fr‚ nl
BPZ:RMU710B-2
RMU710B-2
6
2
2
1
da‚ fi‚ sv‚ no
BPZ:RMU710B-3
RMU710B-3
6
2
2
1
cs‚ hu‚ pl‚ sk‚ ru‚ bg BPZ:RMU710B-4
RMU710B-4
6
2
2
1
sr‚ hr‚ sl‚ ro‚ el‚ tr
BPZ:RMU710B-5
RMU710B-5
6
2
2
1
zh
S55370-C159
RMU710B-6
8
3
4
2
de‚ fr‚ it‚ es
BPZ:RMU720B-1
RMU720B-1
8
3
4
2
de‚ en‚ fr‚ nl
BPZ:RMU720B-2
RMU720B-2
8
3
4
2
da‚ fi‚ sv‚ no
BPZ:RMU720B-3
RMU720B-3
8
3
4
2
cs‚ hu‚ pl‚ sk‚ ru‚ bg BPZ:RMU720B-4
RMU720B-4
8
3
4
2
sr‚ hr‚ sl‚ ro‚ el‚ tr
BPZ:RMU720B-5
RMU720B-5
8
3
4
2
zh
S55370-C160
RMU720B-6
8
4
6
3
de‚ fr‚ it‚ es
BPZ:RMU730B-1
RMU730B-1
8
4
6
3
de‚ en‚ fr‚ nl
BPZ:RMU730B-2
RMU730B-2
8
4
6
3
da‚ fi‚ sv‚ no
BPZ:RMU730B-3
RMU730B-3
8
4
6
3
cs‚ hu‚ pl‚ sk‚ ru‚ bg BPZ:RMU730B-4
RMU730B-4
8
4
6
3
sr‚ hr‚ sl‚ ro‚ el‚ tr
BPZ:RMU730B-5
RMU730B-5
8
4
6
3
zh
S55370-C161
RMU730B-6
5
5-23
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Application examples RMU..
Application examples RMU710B..
These are only a few examples of many applications that can be done with the
with Synco™700 controllers: RMU710B..
More Synco™700 applications are described in “HIT“ (the HVAC project engineering tool with a library of over 300 pre-configured HVAC-applications) and in the
RMU710B.. data sheet.
The evaluation of the energy efficiency classification is based on EN15232:2007.
For a determination of the energy efficiency classification of the application‚
please use the "HIT Tool".
Further details are available in the manual "Building automation - impact on
energy efficiency" in our HIT Online.
www.siemens.com/hit
Room-supply air temperature cascade control
RMU710B..
5
ADA001 U1B HQ
7-day time switch with holiday / special day program
Control of a 2-speed fan
Control of the supply air temperature via the heating coil valve
Frost protection with frost protection monitor
Supervision of the supply and extract air fans with differential pressure sensors
V Supervision of the supply air filter with a differential pressure sensor
V
V
V
V
V
RMU710B..
Room-supply air temperature cascade control
ADB001 U1B HQ
7-day time switch with holiday / special day program
Control of a 2-speed fan
Control of the supply air temperature via the cooling coil valve
Supervision of the supply and extract air fans with differential pressure sensors
V Supervision of the supply air filter with a differential pressure sensor
V
V
V
V
The indicated energy efficiency classification can be attained only if the following functions are implemented:
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
V Air flow control at the room level on demand (Air quality sensor must be integrated as an additional feature)
V Air flow control at the air handler level (Automatic fan step switching corresponds to Efficiency Class B / Step 2 must be switched based on air quality)
V Free mechanical cooling (Outside air temperature and room temperature sensor required)
V Supply temperature control‚ variable set point with load dependant compensation
V Humidity control (Not applicable‚ as no humidity control)
5-24
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Application examples RMU..
Room-supply air temperature cascade control
RMU710B..
ADC001 U1B HQ
V 7-day time switch with holiday / special day program
V Control of a 2-speed fan
V Control of the supply air temperature via the heating coil valve and the cooling coil valve in sequence
V Frost protection with frost protection monitor
V Supervision of the supply and extract air fans with differential pressure sensors
V Supervision of the supply air filter with a differential pressure sensor
RMU710B..
Room-supply air temperature cascade control
AEA001 U1B DE
5
V 7-day time switch with holiday / special day program
V Control of a variable-speed fan
V Control of the supply air temperature via the mixed air dampers and the heating coil valve in sequence
V Frost protection with frost protection monitor
V Supervision of the supply and extract air fans with differential pressure sensors
V Supervision of the supply air filter with a differential pressure sensor
The indicated energy efficiency classification can be attained only if the following functions are implemented:
V Air flow control at the room level‚ demand control
V Air flow control at the air handler level‚ automatic flow or pressure control
with or without pressure reset
V With heat exchanger overheating control
V Free mechanical cooling (Not applicable due to lack of cooling sequence)
V Humidity control (Not applicable‚ as no humidity control)
V Home automation / building automation and control system and technical
home/building management required satisfying Efficiency Class A
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
5-25
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Application examples RMU..
RMU710B..
Room-supply air temperature cascade control
ADAE01 U1B HQ
V 7-day time switch with holiday / special day program
V Control of a 2-speed fan
V Control of the supply air temperature via the heat recovery system and the
heating coil valve in sequence
V Frost protection with frost protection monitor
V Supervision of the supply and extract air fans with differential pressure sensors
V Supervision of the supply and extract air filters with differential pressure sensors
The indicated energy efficiency classification can be attained only if the following functions are implemented:
5
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
V Air flow control at the room level‚ demand control (Air quality sensor must be
integrated as an additional feature)
V Air flow control at the air handler level‚ automatic flow or pressure control
with or without pressure reset (Automatic fan step switching corresponds to
Efficiency Class B / Step 2 must be switched based on air quality)
V Heat exchanger defrost control (Exhaust air temperature sensor required)
V Heat exchanger overheating control
V Supply Temperature control (Variable set point with load dependant compensation)
Application examples RMU720B..
These are only a few examples of many applications that can be done with the
with Synco™700 controllers: RMU720B..
More Synco™700 applications are described in “HIT“ (the HVAC project engineering tool with a library of over 300 pre-configured HVAC-applications) and in the
RMU720B.. data sheet.
The evaluation of the energy efficiency classification is based on EN15232:2007.
For a determination of the energy efficiency classification of the application‚
please use the "HIT Tool".
Further details are available in the manual "Building automation - impact on
energy efficiency" in our HIT Online.
www.siemens.com/hit
5-26
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Application examples RMU..
Room-supply air temperature cascade control
RMU720B..
AEC001 U2B DE
V 7-day time switch with holiday / special day program
V Control of a variable-speed fan
V Control of the supply air temperature via the mixed air dampers‚ the heating
coil valve and cooling coil valve in sequence
V Frost protection with frost protection monitor
V Supervision of the supply and extract air fans with differential pressure sensors
V Supervision of the supply air filter with a differential pressure sensor
V Home automation / building automation and control system and technical
home/building management required satisfying Efficiency Class A
The indicated energy efficiency classification can be attained only if the following functions are implemented:
V Air flow control at the room level‚ demand control
V Air flow control at the air handler level‚ automatic flow or pressure control
with or without pressure reset
V With heat exchanger overheating control
V Free mechanical cooling (Outside air temperature and room temperature sensor required)
V Supply temperature control‚ variable set point with load dependant compensation
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
Room-supply air temperature cascade control
RMU720B..
ADCE01 U2B HQ
V 7-day time switch with holiday / special day program
V Control of a 2-speed fan
V Control of the supply air temperature via the heating coil valve and the cooling coil valve in sequence
V Frost protection with the frost protection monitor
V Supervision of the supply and extract air fans with differential pressure sensors
V Supervision of the supply and extract air filter with a differential pressure sensor
The indicated energy efficiency classification can be attained only if the following functions are implemented:
V Air flow control at the room level‚ demand control (Air quality sensor must be
integrated as an additional feature)
V Air flow control at the air handler level‚ automatic flow or pressure control
with or without pressure reset (Automatic fan step switching corresponds to
Efficiency Class B / Step 2 must be switched based on air quality)
V Heat exchanger defrost control (Exhaust air temperature sensor required)
V With heat exchanger overheating control
V Free mechanical cooling (Outside air temperature and room temperature sensor required)
V Supply Temperature control‚ variable set point with load dependant compensation
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
5-27
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
5
Standard controllers
Communicating HVAC controllers
Application examples RMU..
RMU720B..
Room-supply air temperature cascade and humidity control
ADFB01 U2B HQ
V 7-day time switch with holiday / special day program
V Control of a 2-speed fan
V Control of the supply air temperature via the heating coil valve and cooling
coil valve in sequence
V Control of room humidity via the air humidifier (on command and modulating
positioning signal)
V Frost protection with frost protection monitor
V Supervision of the supply and extract air fans with differential pressure sensors
V Supervision of the supply air filter with differential pressure sensors
V Limitation of supply air humidity
RMU720B..
Room-supply air temperature cascade and humidity control
AEDB01 U2B HQ
V 7-day time switch with holiday / special day program
V Control of a 2-speed fan
V Control of the supply air temperature via the mixed air dampers and the heating coil valve in sequence
V Control of room humidity via the air humidifier (on command and modulating
positioning signal)
V Frost protection with frost protection monitor
V Supervision of the supply and extract air fans with differential pressure sensors
V Supervision of the supply air filter with a differential pressure sensor
V Limitation of supply air humidity
5
The indicated energy efficiency classification can be attained only if the following functions are implemented:
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
V Air flow control at the room level‚ demand control (Air quality sensor
required)
V Air flow control at the air handler level‚ automatic flow or pressure control
with or without pressure reset (Automatic fan step switching corresponds to
Efficiency Class B / Step 2 must be switched based on air quality)
V With heat exchanger overheating control
V Supply Temperature control‚ variable set point with load dependant compensation
V Room or exhaust air humidity control
5-28
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Application examples RMU..
Room-supply air temperature cascade and humidity control
RMU720B..
ADDP01 U2B HQ
V 7-day time switch with holiday / special day program
V Control of a 2-speed fan
V Control of the supply air temperature via the heat recovery system and the
heating coil valve in sequence
V Control of room humidity via the air humidifier (on command and modulating
positioning signal)
V Frost protection with frost protection monitor
V Supervision of the supply and extract air fans with differential pressure sensors
V Supervision of the supply and extract air filters with differential pressure sensors
V Limitation of supply air humidity
The indicated energy efficiency classification can be attained only if the following functions are implemented:
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
V Air flow control at the room level‚ demand control (Air quality sensor must be
integrated as an additional feature)
V Air flow control at the air handler level‚ automatic flow or pressure control
with or without pressure reset (Automatic fan step switching corresponds to
Efficiency Class B / Step 2 must be switched based on air quality)
V Heat exchanger defrost control (Exhaust air temperature sensor required)
V With heat exchanger overheating control
V Supply Temperature control‚ variable set point with load dependant compensation
V Room or exhaust air humidity control
5
Application examples RMU730B..
These are only a few examples of many applications that can be done with the
with Synco™700 controllers: RMU730B..
More Synco™700 applications are described in “HIT“ (the HVAC project engineering tool with a library of over 300 pre-configured HVAC-applications) and in the
RMU730B.. data sheet.
The evaluation of the energy efficiency classification is based on EN15232:2007.
For a determination of the energy efficiency classification of the application‚
please use the "HIT Tool".
Further details are available in the manual "Building automation - impact on
energy efficiency" in our HIT Online.
www.siemens.com/hit
5-29
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Application examples RMU..
RMU730B..
Room-supply air temperature cascade and humidity control
AEFB01 U3B HQ
V 7-day time switch with holiday / special day program
V Control of a 2-speed fan
V Control of the supply air temperature via the mixed air dampers‚ the heating
coil valve and cooling coil valve in sequence
V Control of room humidity via the air humidifier (on command and modulating
positioning signal)
V Frost protection with frost protection monitor
V Supervision of the supply and extract air fans with differential pressure sensors
V Supervision of the supply air filter with a differential pressure sensor
V Limitation of supply air humidity
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
The indicated energy efficiency classification can be attained only if the following functions are implemented:
V Air flow control at the room level‚ demand control (Air quality sensor
required)
V Air flow control at the air handler level‚ automatic flow or pressure control
with or without pressure reset (Automatic fan step switching corresponds to
Efficiency Class B / Step 2 must be switched based on air quality)
V With heat exchanger overheating control
V Free mechanical cooling (Outside air temperature and room temperature sensor required)
V Supply Temperature control‚ variable set point with load dependant compensation
V Room or exhaust air humidity control
5
RMU730B..
Room-supply air temperature cascade and humidity control
ADFP01 U3B HQ
V 7-day time switch with holiday / special day program
V Control of a 2-speed fan
V Control of the supply air temperature via the heat recovery system‚ the heating coil valve and cooling coil valve in sequence
V Control of room humidity via the air humidifier (on command and modulating
positioning signal)
V Frost protection with frost protection monitor
V Supervision of the supply and extract air fans with differential pressure sensors
V Supervision of the supply and extract air filters with differential pressure sensors
V Limitation of the supply air humidity
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
The indicated energy efficiency classification can be attained only if the following functions are implemented:
V Air flow control at the room level‚ demand control (Air quality sensor must be
integrated as an additional feature)
V Air flow control at the air handler level‚ automatic flow or pressure control
with or without pressure reset (Automatic fan step switching corresponds to
Efficiency Class B / Step 2 must be switched based on air quality)
V Heat exchanger defrost control (Exhaust air temperature sensor required)
V With heat exchanger overheating control
V Free mechanical cooling (Outside air temperature and room temperature sensor required)
V Supply Temperature control‚ variable set point with load dependant compensation
V Room or exhaust air humidity control
5-30
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Application examples RMU..
Room-supply air temperature cascade and humidity control
RMU730B..
ADZA01 U3B HQ
V 7-day time switch with holiday / special day program
V Control of a 2-speed fan
V Room (extract air)-supply air temperature cascade control with minimum and
maximum limitation of the supply air temperature
V Control of the supply air temperature via the reheater valve and the cooling
coil valve in sequence
V Control of the dewpoint temperature via the preheater valve and the cooling
coil valve in sequence
V Control of room humidification via the air humidifier (on command)
V Control of room dehumidification by changing the outputs of dewpoint temperature control
V Frost protection with frost protection monitor
V Supervision of the supply and extract air fans with differential pressure sensors
V Supervision of the supply air filter with a differential pressure sensor
V Limitation of supply air humidity by shutting down the preheater and by
switching off the air humidifier in sequence
5
Room-supply air temperature cascade and humidity control
RMU730B..
AEZH01 U3B DE
V 7-day time switch with holiday / special day program
V Control of variable speed fan
V Room (extract air)-supply air temperature cascade control with minimum and
maximum limitation of the supply air temperature
V Control of the supply air temperature via the mixed air dampers‚ the reheater
valve and cooling coil valve in sequence
V Control of the dewpoint temperature via the mixed air dampers‚ the preheater
valve and cooling coil valve in sequence
V Control of room humidification via the air humidifier (on command)
V Control of room dehumidification by changing the outputs of dewpoint temperature control
V Frost protection with frost protection monitor
V Supervision of the supply and extract air fans with differential pressure sensors
V Supervision of the supply air filter with a differential pressure sensor
V Limitation of supply air humidity
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
The indicated energy efficiency classification can be attained only if the following functions are implemented:
V Air flow control at the room level‚ demand control
V Air flow control at the air handler level‚ automatic flow or pressure control
with or without pressure reset
V With heat exchanger overheating control
V Free mechanical cooling
V Supply Temperature control‚ variable set point with load dependant compensation
V Room or exhaust air humidity control
V Home automation / building automation and control system and technical
home/building management required satisfying Efficiency Class A
5-31
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Application examples RMU..
RMU730B..
Room-supply air temperature cascade and humidity control
AEZH02 U3B HQ
To fulfill the classification‚ the plant must be equipped with
all indicated functions.
5
V 7-day time switch with holiday / special day program
V Control of a 2-speed fan
V Room (extract air)-supply air temperature cascade control with minimum and
maximum limitation of the supply air temperature
V Control of the supply air temperature via the mixed air dampers‚ the reheater
valve and the cooling coil valve in sequence
V Control of the dewpoint temperature via the mixed air dampers and the preheater valve in sequence
V Control of room humidification via the air humidifier (on command) and the
cooling coil valve in sequence
V Frost protection with frost protection monitor
V Supervision of the supply and extract air fans with differential pressure sensors
V Supervision of the supply air filter with a differential pressure sensor
V Limitation of supply air humidity by switching off the air humidifier in
sequence
The indicated energy efficiency classification can be attained only if the following functions are implemented:
V Air flow control at the room level‚ demand control (Air quality sensor
required)
V Air flow control at the air handler level‚ automatic flow or pressure control
with or without pressure reset (Automatic fan step switching corresponds to
Efficiency Class B / Step 2 must be switched based on air quality)
V With heat exchanger overheating control
V Free mechanical cooling (Outside air temperature and room temperature sensor required)
V Supply Temperature control‚ variable set point with load dependant compensation
V With supply air humidity control
5-32
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Switching and monitoring device RMS..
Switching and monitoring device
RMS705B..
In connection with the function blocks‚ the RMS705B complements the range of Synco700 products as
a freely configurable unit for
- control and supervisory functions in heating‚ ventilation and refrigeration plant
- non-standard applications
and‚ for this reason‚ offers no predefined standard applications.
The RMS705B is especially suited for the following functions:
- Connection of additional universal alarm inputs
- Adding free inputs for display and supervision
- Event logging (e.g. legionella function)
- Additional time programs (ON / OFF) for basic functions
- Maximum and minimum selection
- Calculation of average
- Calculation of enthalpy‚ enthalpy differential‚ absolute humidity‚ dewpoint and wet bulb temperature
- Logic function blocks for switching on / off depending on different conditions
- Lead / lag control of pumps‚ fans‚ motors‚ chillers‚ etc.‚ with automatic changeover
- Step switch with linear‚ binary or flexible functionality
- Autonomous sequence controllers with P‚ PI or PID mode
5
Available extension modules:
- 1 universal module RMZ785
- 2 universal modules RMZ787
- 2 universal modules RMZ788
Total maximal 4 extension modules per RMS705B can be connected.
Suitable types of operator units:
- Plug-in operator unit type RMZ790
- Detached operator unit type RMZ791
- Bus operating unit type RMZ792
Data sheet
N3124
Operating voltage
Frequency
Power consumption
Universal inputs‚ number
Universal input‚ signal
AC 24 V
50/60 Hz
12 VA
8
LG-Ni1000
2 x LG-Ni1000
T1 (PTC)
Pt1000
0...1000 Ohm
DC 0...10 V
Digital pulse contact
Potential-free digital status contact
4
DC 0...10 V
Max. 1 mA
6
Potential-free switching contact
AC 19...250 V
4 (3) A
KNX (KNX TP1)
IP20
173 x 90 x 80 mm
Analog outputs‚ number
Analog output‚ signal
Analog output‚ current
Relay outputs‚ number
Relay outputs
Relay output‚ switching voltage
Relay output‚ switching current
Communication
Degree of protection
Dimensions (W x H x D)
5-33
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Switching and monitoring device RMS..
Range overview RMS705B..
Product Title
Data sheet
Stock No.
Product No.
Switching and monitoring device with languages de‚ fr‚ it‚ es‚ pt
N3124
S55370-C100
RMS705B-1
Switching and monitoring device with languages de‚ fr‚ nl‚ en
N3124
S55370-C101
RMS705B-2
Switching and monitoring device with languages da‚ fi‚ no‚ sv
N3124
S55370-C102
RMS705B-3
Switching and monitoring device with languages pl‚ cs‚ hu‚ ru‚ sk‚ N3124
bg
S55370-C103
RMS705B-4
Switching and monitoring device with languages el‚ ro‚ sl‚ sr‚ hr‚ tr N3124
S55370-C104
RMS705B-5
Switching and monitoring device with language zh
S55370-C105
RMS705B-6
N3124
5
5-34
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Extension modules and operator units for RMU.. and RMS..
RMZ790
Plug-in type operator unit
-
Operator unit plugs into the Synco™ 700 controllers
For displaying and changing plant data for service staff and enduser
Clear-text operation
Can be plugged in and removed during operation
Power supply via the controller
Data sheet
N3111
Stock No.
Product No.
BPZ:RMZ790
RMZ790
RMZ791
Detached operator unit with 3 m cable
Like plug-in type operator unit‚ but:
- Other mounting choices (typically for control panel door or wall mounting)
- Larger display
- Connection via a prefabricated 3 m cable‚ supplied as standard
Data sheet
5
N3112
Stock No.
Product No.
BPZ:RMZ791
RMZ791
Bus operator unit
RMZ792
Communicating operator unit for operating up to 150 controllers‚ room units and central units from the
Synco™ 700 range via KNX bus.
Favorite pages can be freely defined. Designed for fixed installation or mobile use.
Data sheet
N3113
Stock No.
Product No.
BPZ:RMZ792
RMZ792
Universal modules
RMZ78..
Additional inputs and outputs required by the Synco™ 700 controllers can be provided by these modules. A description of the functions is given with the relevant controller module.
Data sheet
N3146
Voltage supply
Power consumption
Universal input‚ signal
Supply from controller module
2 VA
0...1000 Ohm
1000...1175 Ohm
2 x LG-Ni1000
DC 0...10 V
Potential-free digital status contact
LG-Ni1000
Pt1000
T1 (PTC)
DC 0...10 V
Max. 1 mA
switching contact‚ potential-free
AC 19...265 V
4 (3) A
Analog output‚ signal
Analog output‚ current
Relay outputs
Relay output‚ switching voltage
Relay output‚ switching current
5-35
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Extension modules and operator units for RMU.. and RMS..
Range overview RMZ78..
Universal inputs‚ number
Analog outputs‚ number
Relay outputs‚ number
Stock No.
Product No.
8
0
0
BPZ:RMZ785
RMZ785
4
0
4
BPZ:RMZ787
RMZ787
4
2
2
BPZ:RMZ788
RMZ788
RMZ780
Module connector
Module connector for detached mounting of extension modules within the control panel.
Distance for detached mounting: Maximum 10 m.
Data sheet
5
N3138
Stock No.
Product No.
BPZ:RMZ780
RMZ780
5-36
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Field devices for RMU.. and RMS..
Sensors‚ setpoint adjusters
Product Title
Data sheet
Stock No.
Product No.
Outside sensor LG-Ni1000
N1811
BPZ:QAC22
QAC22
Outside / room temperature sensor DC 0..10V
N1814
BPZ:QAC3161
QAC3161
Strap-on temperature sensor LG-Ni1000
N1801
BPZ:QAD22
QAD22
Strap-on temperature sensor with cable LG-Ni1000
N1802
BPZ:QAD26.220
QAD26.220
Immersion temperature sensor 100 mm LG-Ni1000‚ with protection pocket
N1781
BPZ:QAE2120.010
QAE2120.010
Immersion temperature sensor 150 mm‚ LG-Ni1000‚ with protection pocket
N1781
BPZ:QAE2120.015
QAE2120.015
Immersion temperature sensor 100 mm‚ LG-Ni1000‚ without
protection pocket
N1781
BPZ:QAE2121.010
QAE2121.010
Immersion temperature sensor 150 mm LG-Ni1000‚ without
protection pocket
N1781
BPZ:QAE2121.015
QAE2121.015
Immersion temperature sensor 100 mm DC 0...10 V
N1782
BPZ:QAE2164.010
QAE2164.010
Immersion temperature sensor 150 mm DC 0...10 V
N1782
BPZ:QAE2164.015
QAE2164.015
Immersion temperature sensur Ø 4 mm with cable and fitting
N1790
BPZ:QAE26.9..
QAE26.9..
Duct temperature sensor 400 mm‚ Pt1000
N1761
BPZ:QAM2112.040
QAM2112.040
Duct temperature sensor 400 mm‚ LG-Ni1000
N1761
BPZ:QAM2120.040
QAM2120.040
Duct temperature sensor 2000 mm‚ LG-Ni1000
N1761
BPZ:QAM2120.200
QAM2120.200
Duct temperature sensor 6000 mm‚ LG-Ni1000
N1761
BPZ:QAM2120.600
QAM2120.600
Frost sensor‚ modulating‚ capillary tube 2000 mm
N1821
BPZ:QAF63.2
QAF63.2
Frost sensor‚ modulating‚ capillary tube 6000 mm
N1821
BPZ:QAF63.6
QAF63.6
Cable temperature sensor for high-temperature applications
(180°C)
N1833
BPZ:QAP21.2
QAP21.2
Cable temperature sensor silicone 1.5 m‚ LG-Ni1000
N1831
BPZ:QAP21.3
QAP21.3
Cable temperature sensor PVC 2 m‚ LG-Ni1000
N1831
BPZ:QAP22
QAP22
Window pane temperature sensor
N1830
BPZ:QAT22
QAT22
Solar sensor
N1943
BPZ:QLS60
QLS60
Differential pressure sensor for
liquids and gases
N1923
BPZ:QBE61.3-DP..
QBE61.3-DP..
Differential pressure sensors for liquids and gase (DC 0…10 V)
N1920
BPZ:QBE63-DP..
QBE63-DP..
Differential pressure sensor for liquids and gases (DC 0…10 V)
0…400 kPa
N1921
BPZ:QBE64-DP4
QBE64-DP4
Pressure sensor for refrigerants (0…10 V)
N1907
BPZ:QBE2001-P..U
QBE2001-P..U
Pressure sensor for liquids and gases (0…10 V)
N1909
BPZ:QBE2002-P..
QBE2002-P..
5
5-37
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Field devices for RMU.. and RMS..
Sensors‚ setpoint adjusters
5
Product Title
Data sheet
Stock No.
Product No.
Air duct differential pressure sensor‚ DC 0...10 V
N1916_01
BPZ:QBM3020..
QBM3020..
Differential pressure sensor‚ DC 0...10 V
N1910_01
BPZ:QBM2030..
QBM2030..
Duct sensor for humidity (DC 0...10 V)
N1864
BPZ:QFM2100
QFM2100
Duct sensor for humidity (0...10 V) and temperature (Ni1000)
N1864
BPZ:QFM2120
QFM2120
Duct sensor for humidity (DC 0...10 V) and temperature (DC
0...10 V)
N1864
BPZ:QFM2160
QFM2160
Duct sensor for humidity (DC 0...10 V) for demanding requirements
N1882
BPZ:QFM3100
QFM3100
Duct sensor for humidity (DC 0...10 V) and temperature (DC
0...10 V) for demanding requirements
N1882
BPZ:QFM3160
QFM3160
Duct sensor for humidity (0...10 V) and temperature (0...10 V)
with calibration certificate
N1883
BPZ:QFM4160
QFM4160
Duct air quality sensor CO2 / temperature / rel. Humidity / VOC
N1962
BPZ:QPM21..
QPM..
Setpoint adjuster‚ passive‚ scale 0...50 °C (exchangeable)
N1991
BPZ:BSG21.1
BSG21.1
Setpoint adjuster‚ passive‚ temperature ranges: -20...20 °C;
20...60 °C; -3...3 K
N1991
BPZ:BSG21.5
BSG21.5
Active setpoint adjuster 0…100 %‚ for flush panel mounting
N1992
BPZ:BSG61
BSG61
Flue gas temperature sensor Pt1000
N1846
BPZ:FGT-PT1000
FGT-PT1000
Duct sensor for air velocity
N1932
BPZ:QVM62.1
QVM62.1
5-38
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Field devices for RMU.. and RMS..
Monitors
Product Title
Data sheet
Stock No.
Product No.
Frost monitor‚ air side‚ 2-point
N1283
BPZ:QAF64..
QAF64..
Frost monitor‚ 2-point
N1284
BPZ:QAF81..
QAF81..
Room hygrostat‚ setpoint setting range 30...90 % r.h.‚ setpoint
adjuster inside device
N1518
BPZ:QFA1000
QFA1000
Room hygrostat‚ setpoint setting range 30...90 % r.h.‚ external
setpoint adjustment
N1518
BPZ:QFA1001
QFA1001
Duct hygrostat‚ setpoint setting range 15...95 % r.h.
N1514
BPZ:QFM81.2
QFM81.2
Room hygrostat‚ setpoint setting range 15...95 % r.h.‚ setpoint
adjuster inside device
N1514
BPZ:QFM81.21
QFM81.21
Condensation monitor‚ AC/DC 24 V
N3302
S55770-T325
QXA2601
Condensation monitor‚ AC/DC 24 V‚ with remote sensor head
(cable length 1.5 m)
N3302
S55770-T326
QXA2602
Differential pressure monitor
N1552
BPZ:QBM81..
QBM81..
Flow switch for use in hydraulic systems‚ PN25‚ DN20...200
N1594
BPZ:QVE1901
QVE1901
Temperature controller
N1205
BPZ:RAK-TR.1..H
RAK-TR.1..H
Thermal reset limit thermostat
N1202
BPZ:RAK-TW.1..H
RAK-TW.1..H
Temperature limiter
N1206
BPZ:RAK-TB.1..M
RAK-TB.1..M
Safety limit thermostat
N1204
BPZ:RAK-ST..M
RAK-ST..M
Temperature controller / thermal reset limit thermostat
N1191
BPZ:RAZ-TW.1..
RAZ-TW.1..
Temperature controller / safety limit thermostat
N1192
BPZ:RAZ-ST..
RAZ-ST..
Changeover thermostat‚ changeover‚ 30 °C / 19 °C‚ IP54
N1295
BPZ:RYT182
RYT182
5
NEW PRODUCT5-39
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Communicating HVAC controllers
Field devices for RMU.. and RMS..
Room units
5
Product Title
Data sheet
Stock No.
Product No.
Room temperature sensor LG-Ni1000
N1721
BPZ:QAA24
QAA24
Room unit with room temperature sensor and setpoint adjuster
N1721
BPZ:QAA25
QAA25
Room unit with room temperature sensor and setpoint readjuster -3…3 K
N1721
BPZ:QAA27
QAA27
Room temperature sensor LG-Ni1000 for mounting on recessed
conduit boxes
N1722
BPZ:QAA64
QAA64
Room unit with KNX bus
N1633
BPZ:QAW740
QAW740
Room sensor for humidity (DC 0...10 V)
N1857
BPZ:QFA2000
QFA2000
Room sensor for humidity (DC 0...10 V) and temperature (LGNi1000)
N1857
BPZ:QFA2020
QFA2020
Room sensor for humidity (DC 0...10 V) and temperature (DC
0...10 V)
N1857
BPZ:QFA2060
QFA2060
Room sensor for humidity (DC 0...10 V) for demanding requirements
N1858
BPZ:QFA3100
QFA3100
Room sensor for humidity (DC 0...10 V) and temperature (DC
0...10 V) for demanding requirements
N1858
BPZ:QFA3160
QFA3160
Room sensor for humidity (DC 0..10V) and temperature (DC
0..10V) with calibration certificate
N1859
BPZ:QFA4160
QFA4160
Indoor air quality controller with integrated VOC sensor for
mixed gas
N1571
BPZ:QPA84
QPA84
Room air quality sensor CO2 / temperature / rel. Humidity / VOC
N1961
BPZ:QPA20..
QPA..
Product Title
Data sheet
Stock No.
Product No.
Variable speed drive
N5192
BPZ:SED2..
SED2..
Transformers
N5536
BPZ:SEM62..
SEM62..
Current valve
N4937
BPZ:SEA45.1
SEA45.1
Signal converter DC 0…10 V or DC 0 / 10 V in AC 0 / 24 V
N5102
BPZ:SEM61.4
SEM61.4
Signal converter with preprogrammed applications
N5146
BPZ:SEZ220
SEZ220
Universal digital indicator
N5312
BPZ:BAU200
BAU200
Product Title
Data sheet
Stock No.
Product No.
Service tool for KNX / LPB
N5655
BPZ:OCI700.1
OCI700.1
Step switches‚ signal converters and transformers
Service tool
5-40
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Software and central communication units
For web and remote operation via KNX: OZW77..
KNX standard systems main components
The KNX standard system consists of the following main components:
Product Title
Data sheet
Stock No.
Product No.
Commissioning and plant operating software
N5649
S55800-Y100
ACS790
Central communication unit OZW771..
N3117
BPZ:OZW771..
OZW771..
Web server for KNX devices
N5701
BPZ:OZW772..
OZW772..
Heating controller
N3133
BPZ:RMH760B..
RMH760B..
Boiler sequence controller
N3132
BPZ:RMK770..
RMK770..
Universal controller
N3150
BPZ:RMUB..
RMUB..
Switching and monitoring device
N3124
BPZ:RMS705B..
RMS705B..
Central control unit RMB795B for RXB/RXL room controllers and
room thermostats RDG/RDF/RDU
N3122
BPZ:RMB795B..
RMB795B..
Room unit with KNX bus
N1633
BPZ:QAW740
QAW740
Room controller for 3-speed fan
N3873
BPZ:RXB21.1/FC-10
RXB21.1/FC-10
Room controller for 3-speed fan
N3873
BPZ:RXB21.1/FC-11
RXB21.1/FC-11
Room controller with 3-speed fan and electric heating coil
N3873
BPZ:RXB22.1/FC-12
RXB22.1/FC-12
Room controller for chilled ceilings and radiators
N3874
BPZ:RXB24.1/CC-02
RXB24.1/CC-02
Room controller for fan-coil applications with KNX communication
N3875
S55373-C121
RXB39.1/FC-13
5
5-41
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Software and central communication units
For web and remote operation via KNX: OZW77..
KNX standard systems main components
The KNX standard system consists of the following main components:
5
Product Title
Data sheet
Stock No.
Product No.
Room controller for 3-speed fan
N3877
BPZ:RXL21.1/FC-10
RXL21.1/FC-10
Room controller for 3-speed fan
N3877
BPZ:RXL21.1/FC-11
RXL21.1/FC-11
Room controller with 3-speed fan and electric heating coil
N3877
BPZ:RXL22.1/FC-12
RXL22.1/FC-12
Room controller for chilled ceilings and radiators
N3878
BPZ:RXL24.1/CC-02
RXL24.1/CC-02
Communicating room controller for fan-coil applications with
proprietary communication
N3876
S55373-C122
RXL39.1/FC-13
Semi Flush-mount room thermostat with KNX communications‚
2-/4-pipe fan coils or DX type equipment
N3171
S55770-T104
RDF301
Semi Flush-mount room thermostat with KNX communications‚
2-/4-pipe fan coils or DX type equipment‚ four buttons for
switching lights and blinds
N3171
S55770-T105
RDF301.50
Hotel Semi Flush-mount room thermostat with KNX‚ 2-/4-pipe
fan coils or DX type equipment‚ four buttons hotel functions
N3171
S55770-T334
RDF301.50H
Semi Flush-mount room thermostat with KNX communications‚
2-/4-pipe fan coils or DX type equipment
N3171
S55770-T293
RDF600KN
Room thermostat with KNX communications‚ AC 230 V‚ for fan
coil units and universal applications
N3191
S55770-T163
RDG100KN
Room thermostat with KNX communications‚ AC 24 V‚ for fan
coil units and universal applications‚ fan (1-/ 3-speed‚ DC)‚ valves
(2-point‚ DC)
N3191
S55770-T297
RDG160KN
Room thermostat with KNX communications‚ AC 24 V‚ VAV heating and cooling systems
N3192
S55770-T165
RDG400KN
Semi Flush-mount room thermostat for rectangular conduit box
with KNX communications‚ for VAV application
N3172
S55770-T106
RDU341
VAV compact controller KNX‚ 24 V‚ 5 Nm‚ 150 s‚ 300 Pa
N3547
S55499-D134
GDB181.1E/KN
VAV compact controller KNX‚ 24 V‚ 10 Nm‚ 150 s‚ 300 Pa
N3547
S55499-D135
GLB181.1E/KN
Base module with KNX for temperature and humidity measurement
N1411
BPZ:AQR2570..
AQR2570..
Base modules with KNX for CO2 measurement
N1411
BPZ:AQR2576..
AQR2576..
Front modules for base modules
N1410
BPZ:AQR253..
AQR253..
Room sensor KNX for temperature
N1602
S55624-H103
QMX3.P30
Room sensor KNX for temperature‚ humidity‚ CO2
N1602
S55624-H104
QMX3.P70
NEW PRODUCT
5-42
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Software and central communication units
For web and remote operation via KNX: OZW77..
Web server for KNX devices
OZW772..
Web server OZW772 allows for remote plant control and monitoring via the web.
V
V
V
V
V
V
V
V
V
V
V
V
V
V
Operate web browser via PC/laptop and Smartphone
Operate ACS (PC/laptop with ACS plant operating software)
Connections: USB and Ethernet
Display fault messages in the web browser
Send fault messages to a maximum of 4 e-mail recipients
Periodically send system reports to e-mail recipients
Visualize the plants in the web browser based on standard plant diagrams and customized plant web
pages
Acquire and display consumption data
Send consumption data file to 2 email recipients
Function "Energy indicator" to monitor data points for energy-related limit values‚ or "Green limits"
Web services for external applications via Web API (Web Application Programming Interface)
Encrypted with https and TLS for emails
Trend function with ACS790
Direct commissioning with web browser or ACS service tool
Data sheet
N5701
Operating voltage
Power pack: AC 230 V
Web server: DC 24 V
KNX TP1 (wire-Bus)
Ethernet‚ RJ45 plug socket (shielded)
USB V2.0 (universal serial bus)
On DIN rails
With Screws
87.5 x 90 x 40 mm
Communication
Mounting
Dimensions (W x H x D)
5
Range overview OZW772..
Product Title
Stock No.
Product No.
Web server for 1 KNX device
BPZ:OZW772.01
OZW772.01
Web server for 4 KNX devices
BPZ:OZW772.04
OZW772.04
Web server for 16 KNX devices
BPZ:OZW772.16
OZW772.16
Web server for 250 KNX devices
BPZ:OZW772.250
OZW772.250
5-43
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Software and central communication units
For web and remote operation via KNX: OZW77..
OZW771..
Central communication unit OZW771..
The OZW771… central communication unit is a component of the Synco™ system. It is used for the
remote operation and supervision of plants with Synco™ 700 Synco™ RXB… and Synco™ living units in
KNX network systems.
Alarm messages can be delivered to
- ACS operating station (ACS alarm)
- SMS receivers
- Fax machines*
- Pagers
- E-mail receivers*
* Only possible with GSM modem‚ depending also on the telephone provider
5
Data sheet
N3117
Operating voltage
Frequency
Power consumption
Digital inputs‚ number
Dimensions (W x H x D)
AC 230 V
50/60 Hz
5 VA
2
161 x 110 x 62 mm
Range overview OZW771..
Product Title
Data sheet
Stock No.
Product No.
Central communication unit‚ max. 4 controllers
N3117
BPZ:OZW771.04
OZW771.04
Central communication unit‚ max. 10 controllers
N3117
BPZ:OZW771.10
OZW771.10
Central communication unit‚ max. 64 controllers
N3117
BPZ:OZW771.64
OZW771.64
Product Title
Stock No.
Product No.
Terminal covers
BPZ:7411100280
7411100280
Accessory for OZW771..
Refer to the central unit data sheet for details
5-44
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Software and central communication units
For HVAC plants: ACS790 / OCI700.1
Commissioning and plant operating software
ACS790
PC software for commissioning‚ operating and supervision of HVAC plants.
Consists of 2 programs: ACS-Tool and ACS-Alarm.
ACS-Tool:
for plant commissioning‚ operating and service
- Popcard (standard and customized)
- Plant diagram (standard and customized)
- Plant view (standard and customized)
- Trend functions (online and offline)
- File transfer
- Parameter settings
- Commissioning protocol
ACS-Alarm:
- For receiving and managing alarms
Commissioning and service via OCI700 service interface
Compatible devices see OCI700.1.
Plant operation and supervision for
KNX systems
- Central units: OZW771‚ OZW772
- Synco™ living: QAX9…
- Controllers: Synco™700‚ Synco RXB/RXL
- Thermostats: RDF…‚ RDG…‚ RDU341
- Sensors: QMX3.P30‚ QMX3.P70‚ AQR253.. and AQR257..
LPB systems
- Central units: OCI611‚ OZW672
- Controllers: RVD2..‚ RVL4..‚ RVP3..
Data sheet
5
N5649
Stock No.
Product No.
S55800-Y100
ACS790
5-45
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Standard controllers
Software and central communication units
For HVAC plants: ACS790 / OCI700.1
OCI700.1
Service tool for KNX / LPB
The service tool consists of:
- ACS790 CD-ROM
- OCI700 service interface
- USB cable
- Service cable for Synco™ controllers
- Service cable for SIGMAGYR® and ALBATROS controllers
Commissioning and diagnostics of the following devices:
KNX devices:
- Central communication units OZW771‚ OZW772
- Heating controllers RMH of the 700-series
- Boiler sequence controllers RMK of the 700-series
- Universal controllers RMU of the 700-series
- Universal controllers RLU of the 200-series
- Switching and monitoring devices RMS of the 700-series
- Room unit QAW740
- Central control units RMB of the 700-series
- Individual room controllers RXB.. / RXL..
- Signal converter SEZ220
- Synco™ living central apartment unit QAX9..
- Synco™ thermostats RDF..‚ RDG..‚ RDU341
- Sensores: QMX3.P30‚ QMX3.P70‚ AQR253.. and AQR257..
5
LPB devices:
- Central communication units OCI611 and OZW672
- Heating controllers RVL of the 4..-series
- Heating controllers RVP of the 3..-series
- District heating controllers RVD of the 2..-series
Data sheet
N5655
Stock No.
Product No.
BPZ:OCI700.1
OCI700.1
5-46
Siemens Switzerland Ltd
Building Technologies Division
Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation Synco
6
Overview and selection tool
Communicative controllers - RXL (Bus)
Communicative controllers - RXB (KNX)
Communicating room thermostats
Central control unit RMB..
Room operating units
Product range overview
6-2
RXL Application
6-5
RXB Application
6-7
For fan coil‚ radiator‚ chilled ceiling
6-9
Field devices
6-11
For fan coil‚ radiator‚ chilled ceiling
6-13
Field devices
6-15
For fan coil units - Communicating KNX thermostat RDG.. / RDF..
6-27
For VAV systems - Communicating KNX thermostat RDG.. / RDU..
6-20
For room controller and room thermostats RXB.. / RXL.. / RDG.. / RDF.. /
RDU..
6-22
Extension modules and operator units for RMB..
6-24
For controllers RX.. (PPS2): QAX3.. / QAX8..
6-25
For controllers RM.. (KNX) QAW74..
6-28
Damper actuator (KNX)
VAV compact controller with KNX
6-28
KNX accessories
Transformers
6-30
KNX - System components
6-31
KNX - Line Couplers
6-33
KNX - Power Supply Units
6-34
Room automation Synco
Overview and selection tools
Product range overview
Room Controller / Roomautomationstation
Communication
Peripheral bus
Fan coil systems
2-pipe system with changeover
2-pipe system with changeover and electric air heater battery
4-pipe system
4-pipe system with electric air heater battery
4-pipe system with supply air temperature limit
2-pipe system with changeover and outside air damper
4-pipe system with outside air damper
2-pipe system and radiator
4-pipe system, with one air damper
Heated/chilled ceilings and radiators
Chilled ceiling with dewpoint monitoring
Chilled ceiling with dewpoint monitoring
Radiator with downdraft compensation
RXL..
RXB..
Bus
KNX
PPS2
PPS2
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
6
6-2
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation Synco
Overview and selection tools
Product range overview
Housing
Setpoint knob
Digital display
Semi-flush mounting
Wiring
Mains-powered
Analog output
Relay output
Functionalities
Manuel Heat / Cool changeover
DC-Ventilators
Operating mode
Comf. mode
Eco mode
Sandby/Prot.
Frost protect.
Buttons for light and blinds
Control loop
Application selectable
2-pipe system
pipe system with electrical heater
2-pipe system and radiator / floor heating
4-pipe system
4-pipe system with electrical heater
2-stage heating or cooling system
Single-duct system
Single-duct system with electrical heater
Single-duct system and radiator / floor heating
Single-duct system with heating / cooling coil
RDG100KN
RDG160KN
■
■
■
■
230 V
24 V
■
■
RDF301
RDF301.50
RDF600KN
■
■
■
■
■
■
230 V
230 V
230V
■
■
■
■
■
■
■
■
■
■
RDG400KN
■
■
RDU341
■
■
24 V
■
24V
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
P/PI
P/PI
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
2P/PI
2P/PI
2P/PI
2P/PI
2P/PI
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
6
■
6-3
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation Synco
Overview and selection tools
Product range overview
Room operation
QAX..
Features
30.1
Display
Mode selection
Fan switch
Setpoint adjuster
Temperature sensor
Mounting
Flush-mounted
Directly on wall
Control panel(door)
32.1
33.1
34.1
34.3
■
■
■
■
■
84.1
740
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
39.1
■
■
■
■
■
■
■
■
Communication
PPS2
KNX
6
31.1
QAW..
■
■
■
■
■
■
■
■
■
Controller
RXL..
RXB..
Synco700
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Wireless-Room operation
Features
Mode selection
Fan switch
Setpoint adjuster
Temperature sensor
Mounting
Flush-mounted
Directly on wall
Communication
EnOcean
KNX
Controller
RXL..
RXB..
95.4
96.4
97.4
■
98.4
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■ 1)
■ 1)
■ 1)
■ 1)
■
■
■
■
1)
Suitable receivers: RXZ97.1/KNX
6-4
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation Synco
Overview and selection tools
Product range overview
RXL applications
RXL – Powerful room controllers for temperature control in individual rooms
RXL ensures individual demand-based comfort in public buildings, offices, schools, hotels, etc. Flexible control of all types of equipment in individual rooms
calls for economical and convenient solutions that can be integrated into existing or new systems and will retain their compatibility long into the future.
Communicating controllers for individual rooms
The communicating room controllers RXL21.1, RXL22.1 and RXL24.1 are used for temperature control in individual rooms. RXL39.1 support energy efficient EC fan-coils. Siemens actuator and sensor technology can be connected.
Easy commissioning with room operator unit
Commissioning and parameter-setting for RXL controllers is carried out directly on the controller, with the QAX34.3 room operator unit. There is no need
for a network connection or a software tool. Mounting on a DIN rail is quick and simple.
User-friendly commissioning and service
The Service LED shows the operational status of the room controller at all times. For example, a flashing green LED is used to indicate normal, trouble-free
operation, a continuous red LED for addressing mode and a flashing red LED to indicate a fault. With the service pin, all controllers can be easily identified
for commissioning or maintenance purposes. As soon as the service pin is pressed, the red service LED on the controller lights up and the controller is displayed on a graphic of the building at the management station.
Complete range of standard room operating units
The extensive range of room operator units is available for direct operation and monitoring of setpoints and measured values in individual rooms. The range extends from very simple room temperature sensors to versatile room operator units with parameter-setting functions.
6
Integration into Synco™
The Synco™ central control unit RMB795 is used for controlling and monitoring the RXL controllers in a Synco™ system.
HVAC
Chilled ceiling
Radiator-type
systems
Fan coil units
QAX30
QAX31
QAX32
QAX33
QAX34
QAX39
QAX84
QAX90
QAX91
AQR2531..
RXL21.1
RXL22.1
RXL24.1
RXL39.1
Room units
Compact
6-5
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation Synco
Overview and selection tools
Product range overview
Fields of application
The scope of RXL is defined by the preprogrammed application software. The following pages provide an overview of the options and the
corresponding devices. The devices are supplied preprogrammed with the applications. The required application can be selected by means of the
Handy tool QAX34.3.
Due to the fact that the applications are predefined, engineering simply involves the definition of a small number of parameters, e. g.:
■ ON / OFF or 3-point control of the valves and actuators
■ Temperature setpoints
■ Manual or automatic fan control
Fan coil systems
Application
FNC02
FNC03
FNC04
FNC05
FNC08
FNC10
FNC12
FNC18
FNC20
FNC02/03/04/08
6
Description
2-pipe system with changeover
2-pipe system with changeover and electrical reheater
4-pipe system
4-pipe system with electrical reheater
4-pipe system with supply air temperature limitation
2-pipe system with change over and outside air damper
4-pipe system with outside damper
2-pipe system with change over and radiator
4-pipe system with air-side control
2-pipe/4-pipe system with EC fan-coil support
Devices
RXL21.1/FC-10
RXL22.1/FC-12
RXL21.1/FC-10
RXL22.1/FC-12
RXL21.1/FC-10
RXL21.1/FC-11
RXL21.1/FC-11
RXL21.1/FC-11
RXL21.1/FC-10
RXL39.1/FC-13
Common functions
■ Window contact, occupancy detector, 4 operating modes
■ Manual fan control with room unit
■ Automatic fan control (RXL21.1/RXL22.1 three speed; RXL39.1 continous speed 0..10V)
■ Options for 2-pipe systems: heating only, cooling only or changeover
Controller
Heated/chilled ceilings and radiators
Application
CLC01
CLC02
RAD01
Description
Chilled ceiling with dewpoint monitoring
Chilled ceiling with dewpoint monitoring, radiator with
downdraft compensation
Radiator with downdraft compensation
Devices
RXL24.1/CC-02
RXL24.1/CC-02
RXL24.1/CC-02
Common functions
■ Window contact, occupancy detector, 4 operating modes
Controller
6-6
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation Synco
Overview and selection tools
Product range overview
RXB applications
RXB hardware
The product range comprises compact controllers and corresponding room units for comfortable control. The compact room controllers are optimized to
the respective application with regard to input/output configuration. HVAC functions are operated via standard room units.
Communication is based on KNX S-mode. The fan coil room controllers communicate also in KNX LTE mode. KNX LTE mode is used for to communicate
with control equipment from the Synco™ 700 product range.
RXB software
Each RXB unit comes with preloaded application software featuring one or several applications (see next page).
The ETS software helps engineer and commission a network with RXB units.
In addition, the Synco™ tool and room unit QAX34.3 by Siemens can be used for commissioning and parameterization.
Integration into Synco™
The Synco™ central control unit RMB795 is used for controlling and monitoring the RXB controllers in a Synco™ system.
HVAC
Chilled ceiling
Radiator-type
systems
6
KNX
Fan coil units
QAX30
QAX31
QAX32
QAX33
QAX34
QAX39
QAX84
QAX95
QAX96
QAX97
QAX98
AQR2531..
RXB21.1
RXB22.1
RXB24.1
RXB39.1
Room units
Compact
6-7
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
Room automation Synco
Overview and selection tools
Product range overview
Fields of application
The scope of RXB is defined by the preprogrammed application software. The following pages provide an overview of the options and the
corresponding devices, divided into different areas of application. The devices are supplied preprogrammed with the applications. The required
application can be selected by means of the ETS, Synco™ tool or the Handy tool QAX34.3.
Due to the fact that the applications are predefined, engineering simply involves the definition of a small number of parameters, e. g.:
■ ON / OFF or 3-point control of the valves and actuators
■ Temperature setpoints
■ Manual or automatic fan control
Fan coil systems
Application
FNC02
FNC03
FNC04
FNC05
FNC08
FNC10
FNC12
FNC18
FNC20
FNC02/03/04/08
6
Description
2-pipe system with changeover
2-pipe system with changeover and electrical reheater
4-pipe system
4-pipe system with electrical reheater
4-pipe system with supply air temperature limitation
2-pipe system with changeover and outside air damper
4-pipe system with outside damper
2-pipe system with change over and radiator
4-pipe system with air-side control
2-pipe/4-pipe system with EC fan-coil support
Devices
RXB21.1/FC-10
RXB22.1/FC-12
RXB21.1/FC-10
RXB22.1/FC-12
RXB21.1/FC-10
RXB21.1/FC-11
RXB21.1/FC-11
RXB21.1/FC-11
RXB21.1/FC-10
RXB39.1/FC13
Common functions
■ Window contact, occupancy detector, 4 operating modes
■ Manual fan control with room unit
■ Automatic fan control (RXB21.1/RXB22.1 three speed; RXB39.1 continous speed 0..10V)
■ Options for 2-pipe systems: heating only, cooling only or change-over, via KNX bus
Controller
Heated/chilled ceilings and radiators
Application
CLC01
CLC02
RAD01
Description
Chilled ceiling with dewpoint monitoring
Chilled ceiling with dewpoint monitoring and radiator
Radiator with downdraft compensation
Devices
RXB24.1/CC-02
RXB24.1/CC-02
RXB24.1/CC-02
Common functions
■ Window contact, occupancy detector, 4 operating modes
Controller
6-8
Siemens Switzerland Ltd
Building Technologies Division
http://www.siemens.com/buildingtechnologies-productcatalog
2014
System Catalog 2014
The information in this document contains general descriptions of technical options available,
which do not always have to be present in individual cases. The required features should therefore
be specified in each individual case at the time of closing the contract.
© Siemens Switzerland Ltd, 2013
Answers for infrastructure and cities.
Our world is undergoing changes that force us to think
in new ways: demographic change, urbanization, global
warming and resource shortages. Maximum efficiency
has top priority – and not only where energy is concerned.
In addition, we need to increase comfort for the well-being
of users. Also, our need for safety and security is constantly
growing. For our customers, success is defined by how
well they manage these challenges. Siemens has the
answers.
www.siemens.com/buildingautomation
“We are the trusted technology partner for
energy-efficient, safe and secure buildings and
infrastructure.”
Building automation
and control systems
Siemens Switzerland Ltd
Infrastructure & Cities Sector
Building Technologies Division
International Headquarters
Gubelstrasse 22
6301 Zug
Switzerland
Tel +41 41 724 24 24
Building automation
and control systems
System Catalog 2014
Answers for infrastructure and cities.