Thermal Camera System Parts List Part # Manufacturer Description

Thermal Camera System Parts List
Part #
Manufacturer
Description
Unit
Qty
427-0030-29-00
FLIR
FLIR Camera - F612
Ea.
1
1730
Pelican Case
Hard Transport Box w/foam for Camera
Ea.
1
4119507
FLIR
Camera wall mount
Ea.
1
JB/BP181608
Adalet
Junction Box w/ back plate
Ea.
1
4130848
Video IQ
Video processor, 4 Channel bridge, 40 GB
Ea.
1
MBR1515L
Netgear
4G LTE Mobile Broadband Wireless router, Verizon Wireless compatible
Ea.
2
DR120-24
Mean Well
Power supply
Ea.
1
STL-Wall-SD
Safeguards
Adjustable wall mounting saddle, 15” x 8” x 13”
Ea.
1
ST-06
Defiant
6-Outlet Power Strip
Ea.
1
G3X2LG6
PANDUIT
Slot Wiring Duct
Lot
1
3034181
Coleman
Ethernet cable
Feet
100
993253
Coleman
Coax Cable RG-59U + Power cable
Feet
100
Additional Camera and Accessories Parts List
Part #
Manufacture
Description
Unit
Qty
427-0030-53-00
FLIR
FLIR Camera - F625
Ea.
1
1730
Pelican Case
Hard Transport Box w/foam for Camera
Ea.
1
4119507
FLIR
Camera wall mount
Ea.
1
STL-Wall-SD
Safeguards
Adjustable wall mounting saddle, 15” x 8” x 13”
Ea.
1
3034181
Coleman
Ethernet cable
Feet
100
993253
Coleman
Coax Cable RG-59U + Power cable
Feet
100
Scope of Work
This requisition is for the purchase of a thermal camera surveillance system for the
purpose of detecting illegal activities, primarily cable theft, in secured NYCT locations. Cable
thieves entering a secure area (our system) will be captured by the video thermal analytics
system, which will in turn send out text and e-mail alerts with attached video clips to alert NYC
Transit and NYPD that cable theft may be occurring. The system will also provide short video
clips of the alert and would also provide live feeds in real time to better evaluate if theft is
occurring and the type of response required.
The vendor supplying material will provide a one-time training session at 130 Livingston
St., Brooklyn, for designated NYCT staff. The thermal camera surveillance system is portable,
and it is expected that following the training, NYCT personnel will be able to install and relocate
the system as needed with no further vendor intervention. The training will instruct attendees on
how to install the camera, install and remove lenses, correctly set up and test equipment, and
troubleshoot system errors. During this training, it is expected that the vendor will physically
handle parts of the surveillance system for the purpose of demonstrating system features or
configurations.
All equipment will be enclosed in sealed/contained units not affected by weather or
airborne contaminants. Camera is rated for operation in outdoor conditions. The transmitting
junction box is currently designed to be sealed from water but is not rated for use in outdoors in
freezing temperature conditions. Because the distance from the camera to the transmitting
junction box can vary, NYCT can place the junction box at an indoor location to ensure proper
system functioning.
Warranty Requirements:
Overall system (all parts and components)
1 year from delivery date
Camera unit (excluding thermal imaging core)
3 years from delivery date
Camera thermal imaging core
10 years from delivery date
Thermal analytics processing system
2 years from delivery date
Salient Characteristics for Thermal Camera Surveillance System
The thermal camera surveillance system will be a self-contained unit capable of operating
on 120VAC, including the parts listed below. System will include a WiFi or cellular connection
for the purpose of transmitting alerts. A separate external camera will be installed via a cable
running to the self-contained unit. Both cameras must be able to be integrated into the same
video IQ processor. Vendor must assemble all equipment together in a junction box enabling
equipment to be deployed quickly in the field. Vendor to provide initial installation instructions
and training for NYCT designated personnel.
Evaluation of Alternate Products
Prior to award, alternate products will be required to undergo a Site Acceptance Test
to evaluate the system’s capabilities of meeting required functions under realistic conditions.
System to include:
•
Thermal Camera, 50 mm focal length, 640x480, NTSC
o Lens to be pre-mounted in camera
o Camera design must enable end users to replace the lens
magazine while camera is in the field
o 10-year detector warranty
•
Hard Transport Box w/foam for Camera
•
•
•
Camera wall mount
Junction box w/ back plate, 19.62” x 17.61” x 8.82” (outside dimensions), hot
compression-molded fiberglass reinforced polyester (thermoset) rated to NEMA
Type 1, 3, 4X, 6P, 12.
Video processor, 4 Channel bridge, 40 GB
•
4G LTE Mobile Broadband Wireless router, Verizon Wireless compatible
•
120 VAC to 24V DIN Rail Mount Power supply
•
•
Adjustable wall mounting saddle, 15” x 8” x 13”, Manufactured from
powder-coated steel
6-Outlet Power Strip
•
G-Type Slot Wiring Duct, 17mm x 15.2mm, PVC
•
Ethernet cable, 100 ft.
•
Coax cable RG-59U, 100 ft. and Power cable, 100 ft.
Additional camera and accessories to include:
•
Thermal Camera, 25 mm focal length, 640x480, NTSC
o Lens to be pre-mounted in camera
o Camera design must enable end users to replace the lens
magazine while camera is in the field
o 10-year detector warranty
•
Hard transport Box w/foam for Camera
•
•
•
Camera wall mount
Adjustable wall mounting saddle, 15” x 8” x 13”, Manufactured from
powder-coated steel
Ethernet cable, 100 ft.
•
Coax cable RG-59U, 100 ft. and Power cable, 100 ft.