Introduction
Congratulations on your new Sharp SX663 phone.
About This User Guide
This user guide is carefully designed to help you learn about
your phone’s features and operations quickly and effectively.
NOTICE
• We strongly recommend that you keep separate permanent
written records of all important data. Data may be lost or
altered in virtually any electronic memory product under
certain circumstances. Therefore, we assume no
responsibility for data lost or otherwise rendered unusable,
whether as a result of improper use, repairs, defects, battery
replacement, use after the specified battery life has expired
or any other cause.
• We assume no responsibility, directly or indirectly, for
financial losses or claims from third parties resulting from
the use of this product and any of its functions, such as
stolen credit card numbers, the loss or alteration of stored
data, etc.
• All company and/or product names are trademarks and/or
registered trademarks of their respective holders.
• Screen layout may differ from that illustrated in this user
guide.
The information described in this user guide is subject to
change without notice.
• All the functions described in this user guide may not be
supported by all networks.
• We assume no responsibility for downloaded contents,
information, etc. from the network.
Intellectual Property Rights
According to copyright laws, the reproduction, alteration and
use of material which is protected by copyright (music,
pictures, etc.) is only permitted for personal or private use. If
the user is not in possession of more extensive copyright or has
not received the explicit permission from the copyright owner
to reproduce, alter or use a copy which has been made or
modified in this way, this is considered to be a violation of the
copyright laws and gives the copyright owner the right to claim
for damages. For this reason, avoid the illegal use of material
which is protected by copyright.
Windows is a registered trademark of Microsoft Corporation in
the United States and/or other countries.
Introduction
1
Powered by JBlend™ Copyright 1997-2005 Aplix
Corporation. All rights reserved.
JBlend and all JBlend-based trademarks and logos
are trademarks or registered trademarks of Aplix
Corporation in Japan and other countries.
Powered by Mascot Capsule®/Micro3D Edition™
Mascot Capsule® is a registered trademark of HI Corporation
©2002-2007 HI Corporation. All Rights Reserved.
Licensed by Inter Digital Technology Corporation under one or more of the
following United States Patents and/or their domestic or foreign
counterparts and other patents pending, including U.S. Patents:
4,675,863: 4,779,262: 4,785,450: 4,811,420: 5,228,056: 5,420,896:
5,799,010: 5,166,951: 5,179,571 & 5,345,467
T9 Text Input is covered by the Hong Kong Standard Patent No.
HK0940329 and HK1010924.
T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos.
5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554;
Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United
Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463
(96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat.
Nos. KR201211B1 and KR226206B1; and additional patents are pending
worldwide.
CP8 PATENT
2
Introduction
microSD™ is a trademark of the SD Card Association.
Bluetooth is a trademark of the Bluetooth SIG, Inc.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sharp is under license. Other trademarks
and trade names are those of their respective owners.
Licensed by QUALCOMM Incorporated under one or more of the following
United States Patents and/or their counterparts in other nations ;
4,901,307
5,490,165 5,056,109 5,504,773 5,101,501
5,506,865
5,109,390 5,511,073 5,228,054 5,535,239
5,267,261
5,544,196 5,267,262 5,568,483 5,337,338
5,600,754
5,414,796 5,657,420 5,416,797 5,659,569
5,710,784
5,778,338
Useful Functions and Services
This product contains NetFront Browser and NetFront Messaging Client of
ACCESS CO.,LTD.
ACCESS and NetFront are trademarks or registered trademarks of ACCESS CO.,
LTD. in Japan and other countries.
NetFront Browser © Copyright 1996-2007 ACCESS CO., LTD.
NetFront Messaging Client © Copyright 2000-2007 ACCESS CO., LTD.
This software is based in part on the work of the Independent JPEG Group.
This product is licensed under the MPEG-4 Visual Patent Portfolio License for
the personal and non-commercial use of a consumer to (i) encode video in
compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii)
decode MPEG-4 Video that was encoded by a consumer engaged in a
personal and non-commercial activity and/or was obtained from a licensed
video provider. No license is granted or implied for any other use. Additional
information may be obtained from MPEG LA.
See http://www.mpegla.com.
This product is licensed under the MPEG-4 Systems Patent Portfolio License
for encoding in compliance with the MPEG-4 Systems Standard, except that
an additional license and payment of royalties are necessary for encoding in
connection with (i) data stored or replicated in physical media which is paid
for on a title by title basis and/or (ii) data which is paid for on a title by title
basis and is transmitted to an end user for permanent storage and/or use.
Such additional license may be obtained from MPEG LA, LLC.
See http://www.mpegla.com for additional details.
Your phone offers you the following features:
• Video Calling. You can talk while viewing each other on respective screens.
• 3D and colour Java™ games. You can also download various games and
applications from SmarTone-Vodafone via the mobile Internet.
• Thin Film Transistor (TFT) colour LCD display with images that are clearer and
easier to view.
• A built-in digital camera with an auto focus function for taking pictures and video
clips.
• A message function for reading and creating SMS messages.
• MMS (Multimedia Messaging Services) for sending picture, sound and video
messages to brighten someone’s day.
• Email for sending up to 300 KB and receiving mail with attachments.
• A colour WAP browser for accessing information on the mobile Internet.
• Your own ringtones and ring video clips. You can use sound or video clip files as
a ringtone or ring video clip.
• A music player that can play back MP3, MPEG-4 and 3GPP format sound files
(supported codec of MPEG-4 or 3GPP are AMR, AAC, AAC+, and AAC+e).
• Playback of downloaded sound and video clip files.
• A voice recorder function for recording and playing back voice clips.
• A Bluetooth® wireless technology interface for establishing contact and
transmitting data with certain devices. You can transmit pictures, sounds, and
video clips to OBEX-enabled phones.
• A schedule alarm for creating and sending schedule entries with alarm settings.
• A microSD™ memory card slot that expands connectivity with a PC using the
memory card.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
Introduction
3
Contents
Introduction .............................................................. 1
List of Menu Functions ............................................ 6
Getting Started ......................................................... 8
Inserting/Removing the SIM/USIM Card and the
Battery ............................................................ 11
Charging the Battery ........................................ 13
Inserting/Removing the Memory Card ............... 14
Connecting the Handsfree Kit ........................... 15
Turning Your Phone On and Off ........................ 16
Slide Functions and Keypad Lock ...................... 17
Display Indicators ............................................ 18
Navigating Functions ............................................. 20
Voice Call/Video Calling Functions ........................ 21
Entering Characters ............................................... 30
Changing the Input Language ........................... 31
Changing the Input Method .............................. 31
Chinese User Dictionary ................................... 36
Using Templates .............................................. 39
Copying, Cutting and Pasting Text .................... 39
Insert Phonebook Entries .................................. 39
4
Contents
Using the Menu .......................................................40
Main Menu ......................................................40
Shortcut Keys ..................................................40
Call Manager ...........................................................41
Sending a Message from the Phonebook ...........44
Multimedia ..............................................................51
Camera ....................................................................58
Taking Pictures ................................................58
Recording Video Clips .......................................59
Common Functions in the Photo and Video Camera
Modes .............................................................59
Functions in Photo Camera Mode ......................62
Functions in Video Camera Mode ......................65
Messages ................................................................66
SMS ................................................................66
MMS ...............................................................66
Email ...............................................................66
Area Info ..........................................................74
Browser ...................................................................79
Navigating a WAP or Web Page ........................80
Gallery ..................................................................... 84
Games & Applications ............................................ 92
Organiser ................................................................ 97
SIM Application .................................................... 109
Settings ................................................................ 110
Call Log ................................................................. 133
Connectivity .......................................................... 135
Bluetooth ...................................................... 135
Mass Storage ................................................ 138
USB Charge ................................................... 138
Card Settings ................................................. 138
Off Line Mode ................................................ 139
Backup/Restore ............................................. 139
Connecting SX663 to Your PC .............................. 140
System Requirements .................................... 140
3G/GSM Modem ............................................ 140
Handset Manager .......................................... 142
Music Manager ............................................. 143
Sync Manager ............................................... 145
Troubleshooting ................................................... 146
Safety Precautions and Conditions of Use .......... 148
Conditions of Use ........................................... 148
Environment .................................................. 151
Precautions Concerning Vehicle Use ................151
SAR ...............................................................151
FCC NOTICE ...................................................152
Out of Warranty List ..............................................154
Index .....................................................................155
Contents
5
List of Menu Functions
SX663 functions are listed below.
See relevant page for details of each function. The menu’s corresponding number is used for shortcuts. For details, see page 40.
1 Games & Applications
3 Organiser
4 Messages
1 GSX™ & Java™
Gallery
2 Java™ Settings
3 Java™
Information
(Tab 1: Organiser)
1 Calendar
2 Alarms
3 Stopwatch
4 Tasks
5 World Clock
6 Countdown Timer
(Tab 2: Utilities)
1 Calculator
2 Voice Recorder
3 Expenses Memo
4 Phone Help
1 Create Message
2 Inbox
3 Alert Inbox
4 Drafts
5 Templates
6 Sent
7 Outbox
8 Voice Mail
9 Cell Broadcasts
10 Area Info
11 Messaging
Settings
12 Memory Status
p. 92
p. 94
p. 96
2 Browser
1 Homepage
2 Go to URL
3 Bookmarks
4 Alert Inbox
5 My Saved Page
6 Access History
7 Browser Settings
8 www
9 PLUS
10 News
11 Music
12 Games
13 Sports
14 Email
6
p. 79
p. 79
p. 79
p. 79
p. 79
p. 79
p. 81
–
–
–
–
–
–
–
List of Menu Functions
p. 97
p. 100
p. 102
p. 102
p. 105
p. 105
p. 106
p. 107
p. 108
p. 108
5 Camera
6 Gallery
p. 66
p. 70
–
p. 70
p. 39
p. 67
p. 69
–
p. 73
p. 74
p. 74
–
p. 58
1
2
3
4
5
6
7
8
9
Pictures
Videos
SD Videos
Music and Sounds
Themes
GSX™ & Java™
Text Templates
Other Documents
Memory Status
p. 84
p. 85
p. 85
p. 86
p. 86
p. 92
p. 87
p. 88
p. 91
7 Multimedia
1
2
3
4
Video Player
Streaming Player
Music Player
FM Radio
p. 51
p. 53
p. 54
p. 56
8 Call Manager
9 Settings
(Tab 1: Phonebook)
1 Phonebook
2 Add New
3 My Card
(Tab 2: Services)
1 Call Voicemail
2 Speed Dial List
3 Service Dialling
Number*
4 FDN*
(Tab 3: Phonebook
Settings)
1 Manage Groups
2 Message Groups
3 Phonebook
Settings
4 Advanced
(Tab 1: Profiles)
1 Normal
2 Meeting
3 Activity
4 Car
5 Headset
6 Silent
(Tab 2: Phone Settings)
1 Display Settings
2 Sound Settings
3 Slider Settings
4 Date & Time
5 Language
6 Shortcuts
7 Ringer Volume
8 Earpiece Volume
9 Master Reset
(Tab 3: Other Settings)
1 Call Settings
2 Video Calling
Settings
3 Security Settings
4 Internet Settings
5 Network Settings
p. 41
p. 41
p. 42
–
p. 50
p. 43
p. 44
p. 45
p. 49
p. 41
p. 48
10 SIM Application* p. 109
p. 110
p. 110
p. 110
p. 110
p. 110
p. 110
p. 115
p. 118
p. 118
p. 119
p. 120
p. 120
–
–
p. 121
11 Call Log
1
2
3
4
5
6
7
All Calls
Dialled Numbers
Missed Calls
Received Calls
Call Timers
Call Costs*
Data Counter
p. 133
p. 133
p. 133
p. 133
p. 133
p. 134
p. 134
12 Connectivity
1
2
3
4
5
6
Bluetooth
Mass Storage
USB Charge
Card Settings
Off Line Mode
Backup/Restore
p. 135
p. 138
p. 138
p. 138
p. 139
p. 139
* Depends on SIM/USIM card
contents.
p. 121
p. 126
p. 127
p. 129
p. 131
List of Menu Functions
7
Getting Started
1
10
2
23
11 21
3
4
5
12 22
13
14
15
16
6
7
8
17
9
8
18
19
20
Getting Started
24
25
26
27
1. Sub Camera
2. Small Light:
Flashes when an incoming call or a new message is
received or missed, if Event Light or Status Light (p. 114) is
enabled.
3. Navigation Keys (Arrow Keys): abcd
Moves cursor to highlight a menu item, etc.*
Up arrow key (a) displays the Bookmarks when pressed
in standby.
Down arrow key (b) displays the Phonebook entries when
pressed in standby.
Left arrow key (c) displays the list of GSX™ & Java™
Gallery when pressed in standby.
Right arrow key (d) displays Gallery when pressed in
standby.
4. Centre Key: B
Displays Main menu in standby, and executes functions.
Long press in standby to initiate video camera.
5. Left Soft Key: A
Executes the function in the lower left of the screen.
Displays Messaging menu in standby.
Long press in standby to initiate keypad lock.
Long press when keypad is locked to unlock.
6. Send/Redial Key: D
Makes voice calls or accepts calls, and displays the call
logs in standby.
Long press in standby to make video callings.
7. Voice Recorder Key: S
Activates voice recorder.
8. Voicemail Key: G
Long press to connect to the Voicemail centre. (Depending
on the SIM/USIM card.)
9. * /Shift Key: P
Switches character input method as follows on the text
entry screen.
In English mode: Abc, ABC, abc and 123. In T9 mode, T9
Abc, T9 ABC, T9 abc and 123.
In Traditional Chinese mode: Abc, ABC, abc, 123, and T9
Stroke
In Simplified Chinese mode: Abc, ABC, abc, 123, T9
PinYin, and T9 Stroke
Press to enter P, ? or * in standby.
Long press in standby to lock the keypad.
10.Earpiece/Speaker
11.Display
Getting Started
9
12.Right Soft Key: C
Executes the function in the lower right of the screen.
Accesses “SmarTone iN! ” by opening the browser in
standby.*
13.End/Power Key: F
Ends a call and turns power on/off.
14.Mobile TV Key: T
Activates Mobile TV.
15.Clear/Back Key: U
Clears the characters before the cursor, returns to the
previous screen, etc.
16.Music Key: E
Displays Music menu in standby.
17.Keypad
18.#/Silent Key: R
Displays symbol screen on the text entry screen.
Long press to switch languages on the text entry screen.
Long press in standby to switch Profiles settings between
the mode most recently activated and Silent mode.
19.Microphone
20.External Connector:
Used to connect either the charger or a USB data cable.
21.Main Camera
10
Getting Started
22.Built-in Aerial:
Warning: Do not cover the top of the phone with your hand
when in use as this may interfere with the performance of
the built-in aerial.
23.Battery Cover
24.Camera Key: X
Long press in standby to activate the camera.
Takes a picture or starts recording video when the camera
is active.
25.Side Keys: VW
Press in standby or during a call to increase or decrease
the earpiece volume.
Press during incoming call to mute the ringer or disable
vibration mode (if active).
Press while listening to music (or video) to increase or
decrease the earpiece volume.
26.Handsfree Kit/Microphone Connector
27.microSD Card Slot
* Default standby assignment can be changed via the
Shortcuts menu. See “Shortcuts” on page 120.
Inserting/Removing the SIM/USIM Card and
the Battery
1. Slide off the battery cover (
2. Unlock the SIM/USIM lock
the SIM/USIM holder
).
, slide the SIM/USIM card into
, and lock the SIM/USIM lock
.
3. Hold the battery so that the metal contacts of the battery
are facing down, slide the guides on the top of the
battery into the battery slots
, and then insert it
.
4. Replace the battery cover.
Note
• Make sure that only 3V SIM/USIM cards are used.
• Make sure that the standard accessory battery is used.
SIM/USIM card
Getting Started
11
Battery Disposal
The device is battery-powered. In order to protect the
environment, please read the following points concerning
battery disposal:
• Take the used battery to your local waste depot, dealer or
customer service centre for recycling.
• Do not expose the used battery to a naked flame, immerse
in water or dispose with the household waste.
12
Getting Started
Charging the Battery
You must charge the battery for at least 150 minutes before
using your phone for the first time.
Using the Charger
1. Open the cover of the external connector, and connect
the charger horizontally to the external socket located at
the bottom of the phone until it clicks.
2. Connect the charger to an AC outlet.
When the phone is charging, the battery status icon (
)
displays the current status. The Small Light also lights up.
Standard charging time: Approx. 150 minutes
Note
• Charging time may vary depending on the state of the battery
and other conditions. (See “Battery” on page 149.)
To Disconnect the Charger
When charging is completed, the battery indicator icon displays
the full charge status. The Small Light also turns off when
completed.
1. Unplug the charger from the AC outlet.
2. Push and hold the side buttons of the charger
, then
disconnect the charger from the external socket of the
phone
.
3. Close the cover.
Note
• Do not use any non-approved chargers as they may damage
your phone and invalidate any warranties, see “Battery” on
page 149 for details.
• Forcibly disconnecting the charger may cause malfunction.
Getting Started
13
To Charge Using the Cigarette Lighter Charger
The optional cigarette lighter charger supplies power for
charging from the cigarette lighter socket of a car.
Battery Level Indicator
The current battery level is displayed in the upper right of the
screen.
Low Battery during Use
When the battery is running low, an alarm will sound and
“
” is displayed on the screen.
If you are using your phone and you hear the low battery alarm,
attach your charger as soon as possible. The phone may not be
able to continue normal operation if you continue to use it.
Battery Indicators
Charge Level
Sufficiently charged
Charging recommended
Charging required
Empty
14
Getting Started
Inserting/Removing the Memory Card
Note
• Make sure that the phone is turned off before inserting/
removing the memory card.
• Be sure to insert the card in the correct direction and
orientation.
• Keep all memory cards out of the reach of small children.
1. Turn off the phone.
2. Open the microSD card slot cover.
3. Insert the memory card until it clicks. (To remove the
memory card, push the memory card until it clicks.)
Connecting the Handsfree Kit
1. Open the connector cover.
2. Connect the handsfree kit.
4. Close the cover.
Tip
• You see the following indicators when the memory card is in
use:
: Appears when the card is inserted.
: Appears when the card is damaged or unusable. Make
sure the card is properly inserted.
: Appears when the card is being written to or read.
: Appears when the card is being formatted.
Getting Started
15
Turning Your Phone On and Off
To turn the power on or off, long press F for approximately 2
seconds.
To Enter the PIN Code
If the PIN (Personal Identification Number) code is enabled you
are asked to enter the PIN code each time the phone is
switched on. For details on setting the PIN code, see “Enabling/
Disabling the PIN Code” on page 127.
1. Enter your PIN code.
The PIN code is 4 to 8 digits.
2. Press B.
Note
• If your PIN code is entered incorrectly three times in a row,
the SIM/USIM card is locked. See “Enabling/Disabling the
PIN Code” on page 127.
• If the clock settings have not been entered, the date and time
entry screen is displayed (p. 119).
16
Getting Started
To Copy All Phonebook Entries from the SIM/USIM Card
When you insert the SIM/USIM card into your phone for the first
time and start the Phonebook application, you are asked
whether you wish to copy Phonebook entries on the SIM/USIM
card. Follow the on-screen instructions, or you can do it later
using the Phonebook menu as follows:
“Call Manager” → “Phonebook Settings” tab →
“Advanced” → “Copy All Entries”
1. Select “From SIM to Handset”.
Slide Functions and Keypad Lock
When your phone is on, you can make a call or answer an
incoming call by sliding open your phone.
You can terminate the call and lock the keypad to prevent it
from being pressed accidentally by sliding close your phone.
Note
• You can use some applications even when your phone is
closed.
• Some Java™ applications are suspended when your phone
is closed.
• Do not stick items on the back of the LCD display when the
slider is open.
You can also operate the following actions by sliding open/
close your phone.
When opened:
• The display and keypad light up.
• The keypad is unlocked.
• Incoming calls can be answered.
See “Slider Settings” on page 118.
When closed:
• The handset sends a busy tone to the caller.
• Calls are terminated.
See “Slider Settings” on page 118.
Getting Started
17
Display Indicators
1.
/
Indicator area
Left soft key
18
Getting Started
Centre key
Right soft key
2.
/
3.
4.
/
/
5.
/
6.
/
7.
8.
:
/
: Strength of received signal/Service out of
range
: HSDPA
: EDGE
: 3G (UMTS)/GPRS
/
: GPRS enabled/GPRS disabled
: Roaming outside network
:
Connection to the server [established/
communicating]
:
Voice call [incoming/in progress]
/ : Video calling communication mode enabled
[voice/video/voice and video]
:
Alerts [text message and multimedia
message/Email]
/ : Mailbox full [SIM/USIM card only/handset
only/both SIM/USIM card and handset]
“Voice Calls” diverts set to “Always”
/ / / :
Connection status
[USB cable/Bluetooth wireless setting
[enabled (in standby)/exchanging
information/talking with the Bluetooth
headset/Hide my phone]]
9.
/
/
/
10.
11.
:
/
/
:
12.
/
13.
14.
15.
16.
:
17.
:
18.
/
19.
20.
21.
22.
:
:
:
:
/
:
:
/
:
/
:
Java™ application [executed (colour)/
suspended (grey)]/Music player/FM Radio
Secure WAP page displayed
23. (No display)/
/ / / / :
Current profile [Normal/Meeting/Activity/Car/
Headset/Silent]
Silent/vibration setting [silent/vibration
enabled/silent and vibration enabled]
: Speaker mode [speaker phone/speaker
activated/microphone muted]
Memory card inserted
Battery level
Daily alarm enabled
Schedule entry enabled [with/without
reminder alarm]
Outbox contains unsent messages [text
message/multimedia/Email]
: WAP/OTA provisioning alerts [WAP alert/OTA
provisioning alert/WAP and OTA provisioning
alerts]
Voicemail message alert
“Show Secret Data” set to “On”
Function Lock enabled
Keypad Lock enabled
Getting Started
19
Navigating Functions
All applications are accessed from the Main menu. To open the
Main menu, press the centre key B in standby.
To launch applications, you will need to highlight menu items,
and make selections. To select a menu item (indicated in
quotation marks), move the cursor using a, b, c and d,
and press B to select.
In certain procedures, you will need to press one of the soft
keys (indicated in square brackets), which are displayed in the
lower left and right of the screen. Press the corresponding soft
key (A or C).
To return to the previous screen, press the right soft key if it
displays Back. To close the Main menu, press the right soft key
if it displays Back.
Each section in this user guide starts with a list of items you will
need to select in order (indicated in italics) before performing
the procedures shown. Select each item to reveal the next set
of items that you have to choose from. Open subsection items
after opening those listed in the main section.
Example:
“Games & Applications” → “Java™ Settings”
20
Navigating Functions
The following menus have tabs - Organiser, Call Manager and
Settings.
You can select the desired tab with the c/d key, and after
that you can select the item you wish to set in the selected tab
with the a/b key.
Example:
“Call Manager” → “Phonebook Settings” tab →
“Advanced”
Voice Call/Video Calling Functions
For details on setting call functions, see “Call Log” on
page 133.
Making a Voice Call
1. Enter the area code and the phone number you wish to
dial and press D to dial.
If you enter the wrong number, press U to delete the
number to the left of the cursor.
Emergency Calls
1. Enter 999 or 911 (international emergency number)
using the keypad and press D to dial.
Note
• Emergency calls may not be able to be made on all mobile
phone networks when certain network services and/or
phone features are in use. Contact your service provider for
more information.
• This emergency number can normally be used to make an
emergency call in any country, with or without a SIM/USIM
card inserted, if a 3G (UMTS)/GSM network is within range.
International Calls
1. Long press Q until a + (international dialling prefix)
sign is displayed.
2. Enter the country code, followed by the area code
(without the leading zero) and the phone number, and
press D to dial.
Adding an Entered Phone Number to the Phonebook
1. After entering a phone number, press [Options] and
select “Save Number”.
For details on creating a new entry, see “Adding a New
Entry” on page 41.
Showing or Hiding My Phone Number on the Display of
the Called Party
1. After entering a phone number, press [Options], select
“Show My ID” or “Hide My ID” and press D to dial.
Voice Call/Video Calling Functions
21
Speed Dialling
Answering a Voice Call
Up to 8 phone numbers from the Phonebook memory (Handset
and SIM/USIM) can be assigned to speed dials. You can call the
numbers using the digit keys (G to O). The phone number
of the Voicemail centre is assigned to G.
For details on setting the speed dial list, see “Speed Dial List”
on page 50.
1. To dial a number using the speed dial, long press any of
the digit keys (G to O).
The phone number saved in the speed dial list is dialled.
When an incoming call is detected, the phone rings.
1. Press D, B or press [Options] and select “Answer” to
answer the call.
Or press any key except F, [Options] or [Busy] when the
“Any Key Answer” function is enabled. Set the Any Key
Answer function in the profile of each mode (p. 115).
You can answer an incoming call by sliding open your
phone if “Calls on Open” is set to “Accept Call” in Slider
Settings (p. 118).
Redialling
You can redial numbers in the call log. Select from specific
categories or “All Calls”. Specific categories contain up to 30
numbers and the “All Calls” list contains up to 90.
1. Press D in standby.
2. Select the category from “All Calls”, “Dialled Numbers”,
“Missed Calls” or “Received Calls”.
To switch logs, press c or d.
3. Highlight the phone number you wish to call.
4. Press D to redial a voice call or long press D to redial
a video calling.
22
Voice Call/Video Calling Functions
Tip
• If you have subscribed to the Calling Line Identification (CLI)
service and the caller’s network sends the number, the
caller’s number is displayed on the screen. If the caller’s
name and number are saved in the Phonebook, the caller’s
name is displayed on the screen.
• If the number is a restricted number, the display shows
“Withheld”.
• When you receive a call from the person whose picture is
registered in the Phonebook, the picture and name are
displayed.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call you
do not wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a busy
tone to the caller.
In Call Menu (Voice Call)
Your phone has additional functions available while a call is in
progress.
Adjusting the Earpiece Volume
You can adjust the earpiece volume (and handsfree kit volume,
if connected) to five levels.
1. Press V or W to display the Earpiece Volume screen.
2. Press V (or a/d) to increase the volume of the call or
press W (or b/c) to decrease the volume.
Putting a Call on Hold
This function allows you to manage two calls at the same time.
If you wish to make another call while you are talking to
someone, you can put the current call on hold to call someone
else.
To Make Another Call during a Call
1. During a call, press [Options] and select “Hold”.
The current call is put on hold.
2. Press [Options] and select “Dial New Number”.
3. Enter the phone number you wish to make another call
to, then press D.
Tip
• You can also make another call by entering the phone
number during a call instead of step 1. The current call is
automatically put on hold.
3. Press B when the volume is set to the desired level.
Turning the Speaker On and Off
You can talk via the loudspeaker on the phone when it is on.
1. During a call, press [Options] and select “Loudspeaker
On”.
Voice Call/Video Calling Functions
23
Accessing SMS/MMS Menu during a Call
1. During a call, press [Options] and select “Messages”.
The following options are available: “Create Message” to
make an SMS and MMS, or “Inbox”, “Sent” or “Drafts” to
access these folders. For details on SMS and MMS, see
“SMS” and “MMS” on page 66.
Call Waiting
This service notifies you of another incoming call while you
have a call in progress.
1. During a call, press [Options] and select “Hold &
Answer” to answer the second call.
The first call is put on hold and you can now talk to the
second caller.
You can also answer the second call by pressing D.
Note
• You need to set “Call Waiting” to “On” if you wish to use the
Call Waiting service (p. 123).
• Call Waiting service may not be available on all networks.
Contact your service provider for more information.
• If you do not wish to answer the second call, press [Options]
and select “Busy” in step 1. If “Reject” is selected, the log of
the second call is saved as a missed call.
24
Voice Call/Video Calling Functions
Conference Call
Conference call is a call with more than 2 participants. You may
include up to 5 participants in a conference call.
To Make a Conference Call
You must have one active call and one held call.
1. During a call, press [Options] and select “Conference
All” to join the conference call.
2. Press F to end the conference call.
Note
• The conference call service may not be available on all
networks. Contact your service provider for more
information.
• To end the call with all participants, press [Options] and
select “End All Call(s)”.
• To reject adding more participants to the current party, press
[Options] and select “Reject”, or you can send the busy tone
by selecting “Busy”.
• You have more options for the Conference call after selecting
“Conference All” in step 1:
• To put all participants on hold, select “Hold All”.
• To put all participants except the current call on hold,
select “Private”.
To Add New Participants to the Conference Call
1. Press [Options] and select “Dial New Number”.
2. Enter the number you wish to include in the conference
call and press D to dial.
Muting the Microphone
1. During a call, press [Mute].
To use the microphone again, press [Unmute].
3. Press [Options] and select “Conference All” to join the
conference call.
If you wish to add other participants, repeat steps 1 to 3.
To End the Call with a Conference Call Participant
1. During a conference call, highlight the person that you
wish to disconnect from the conference call.
2. Press [Options] and select “End This Call”.
To Have a Private Conversation with One of the Participants
If you wish to have a private conversation with one of the
participants, you may select the participant from the
conference list and put the other participants on hold.
1. During a conference call, select the person that you wish
to talk to.
2. Press [Options] and select “Private”.
3. Once you have finished the private conversation, press
[Options] and select “Conference All” to return to the
conference call.
Voice Call/Video Calling Functions
25
Making a Video Calling
Answering a Video Calling
Note
• Video callings can only be made and received if both parties
have 3G capable phones and 3G coverage. See “Display
Indicators” on page 18.
• Make sure that the battery is fully charged and the signal is
strong before using this function.
• Turn the loudspeaker on or use a handsfree kit so that you
can talk while looking at the video calling screen on the
display.
When an incoming call is detected, the phone rings.
1. Press D to answer the call with video or press [Options]
and select “Hide Picture” to answer with voice only.
If the slider is closed, you can answer the call (with video)
by sliding open the phone when the “Calls on Open”
function is enabled.
Making a Video Calling
To Make a Video Calling by Entering the Phone Number First
1. Enter the area code and the phone number you wish to
dial.
2. Press [Options] and select “Video Calling” to dial.
If you enter the wrong number, press U to delete the
number to the left of the cursor.
When connected, the image of the called party is displayed
in the upper part of the screen and yours in the lower left.
Tip
• If the called party’s phone is not video calling enabled, you
can press F and enter the phone number again to make a
voice call.
26
Voice Call/Video Calling Functions
Tip
• If you have subscribed to the Calling Line Identification (CLI)
service and the caller’s network sends the number, the
caller’s number is displayed on the screen. If the caller’s
name and number are saved in the Phonebook, the caller’s
name is displayed on the screen.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call you
do not wish to answer.
You can reject an incoming call by sliding close your phone
if “Calls on Close” is set to “End Call” in Slider Settings
(p. 118).
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a busy
tone to the caller of an incoming call letting them know
that you cannot answer the call.
In Call Menu (Video Calling)
Muting the Microphone
1. During a video calling, press [Mute].
To use the microphone again, press [Unmute].
Swapping Images
You can swap images between the main and sub screens.
1. During a video calling, press [Options] and select
“Switch Images”.
Changing the Image of Yourself
1. During a video calling, press [Options] and select
“Camera Picture”.
2. Select “Internal Camera”, “External Camera” or
“Alternative Image”.
“Internal Camera”:
The image through the sub
camera is displayed and sent to
the receiver.
“External Camera”:
The image through the camera
is displayed and sent to the
receiver.
“Alternative Image”:
The camera is turned off and the
image selected in “Alternative
Image” of “Video Calling
Settings” is used.
Turning the Speaker On and Off
You can talk via the loudspeaker on the phone when it is on.
1. During a video calling, press [Options] and select
“Loudspeaker On”.
Note
• In a high-noise environment, you may not be able to
continue a call, or make a clear call. We recommend that you
use the handsfree kit.
• With this option, there may be interruption if you increase the
earpiece volume. We recommend that you decrease the
earpiece volume or use the handsfree kit.
Voice Call/Video Calling Functions
27
3. Select “Always On”, “Always Off” or “As Normal
Video Calling Settings
To Adjust the Quality of the Incoming or Outgoing Image
You can adjust the quality of the called party’s or caller’s
image.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Incoming Picture Quality” or “Outgoing Picture
Quality”.
3. Select “Normal”, “Quality Priority” or “Frame Rate
Priority”.
“Normal”:
“Quality Priority”:
“Frame Rate Priority”:
The standard quality is used.
The quality of the picture takes
precedence over the frame rate.
The frame rate takes
precedence over the quality.
To Turn the Backlight On or Off
You can turn on the backlight of your screen.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Backlight”.
28
Voice Call/Video Calling Functions
Setting”.
When “Always On” is selected, the backlight will always be
on during a video calling.
When “As Normal Setting” is selected, the backlight will
time out depending on the Backlight setting (p. 117).
To Adjust the Video Exposure
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Exposure”.
3. Press a (Light) or b (Dark).
Mirror Image
During a video calling, you can reverse your image on the sub
screen.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Mirror Image”.
3. Select “On” or “Off”.
To Change the Sub Camera Image to the Alternative Image
During a video calling, you can switch the image shown to the
caller between the sub camera image and an alternative image
or display an image while putting a call on hold from the saved
picture files.
1. During a video calling, press [Options] and select
“Camera Picture”.
2. Select “Internal Camera”, “External Camera” or
“Alternative Image”.
If “Alternative Image” is selected, select “Preset Picture” or
“Pictures”.
Voice Call/Video Calling Functions
29
Entering Characters
When entering characters to create Phonebook entries, text
messages or multimedia messages, etc., press the
corresponding keys.
In multi-tap input method, press each key until the desired
character is displayed. For example, press H once for the
letter A or twice for the letter B.
Press the following keys to:
G:
Enter:
. (full-stop) , (comma) ? ! : ; ' (apostrophe) " / 1
Q:
Enter:
(space)+ = < > € £ $ ¥ % &0
P:
Switch character case among four modes:
Abc, ABC, abc and 123.
R:
Enter other characters.
30
Entering Characters
Long press the following keys to:
Enter 1 - 9 numbers.
G- O:
Q:
P:
R:
Enter space in Numeric mode or to enter 0 in
other modes.
Shift between multi-tap and T9 mode.
Display the language options screen.
Changing the Input Language
1. On the text entry screen, press [Options] and select
“Input Language”.
Tip
In T9 or multi-tap mode, you can switch input mode as follows
by pressing P.
English/T9 mode
2. Select the desired language.
Changing the Input Method
1. On the text entry screen, press [Options].
2. Select “Input Method”.
3. Select the input method you wish to use.
English/Multi-tap mode
Input Method
Input Language
= English
Input Language
= Traditional
Chinese
Input Language
= Simplified
Chinese
T9 Mode
T9 Abc
T9 ABC
T9 abc
T9 Stroke
T9 PinYin
T9 Stroke
Multi-tap mode
Abc
ABC
abc
Numeric
Abc
ABC
abc
Numeric
Abc
ABC
abc
Numeric
Others
Symbol Table
Symbol Table
Symbol Table
Traditional Chinese/T9 mode
Entering Characters
31
Simplified Chinese/T9 mode
Tip
• If you press Q instead of step 6, a space is inserted next
to the selected word.
User Dictionary
You can create your own English words for T9 Alphabet text
input.
T9 English Mode
Using T9 English Mode
T9 text input method is a shortcut to enter text easily and
quickly.
1. On the text entry screen, press [Options].
2. Select “Input Method”.
3. Select the T9 mode (T9 Abc, T9 ABC, T9 abc) you wish
to change. “
” is displayed on the main display.
4. Press the keys to enter characters.
5. Press a or b to select the word you wish to input.
6. If you wish to clear the word, highlight it and long press
U.
7. Press B or select [Options] and “Done” to complete the
selection.
32
Entering Characters
Note
• This function is only available when “Input Language” is set
to “English”.
1. On the text entry screen in T9 mode, press [Options] and
select “User Dictionary”.
2. Select “Add New Word” and enter a new word.
To edit a word in the list
1. On the text entry screen in T9 mode, press [Options] and
select “User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the word.
T9 PinYin and T9 Stroke Mode
In T9 PinYin and T9 Stroke mode, keys are as follows.
T9 PinYin and T9 Stroke Mode keys
Key
G
H
I
J
K
L
M
N
O
P
Q
R
Stroke
PinYin
abc
G-O:
P:
R:
Long press to input corresponding Chinese
character displayed in the candidate field.
Long press to enter tones “
T9 PinYin mode.
” in
Long press to display the Input Language
screen.
Changing the Input Method between Stroke and PinYin
See “Changing the Input Method” on page 31.
def
ghi
jkl
Wildcard
mno
pqrs
tuv
wxyz
Change Input Method
Space
Go to the FullWidth Symbols screen.
Entering Characters
33
Using Stroke Mode (Traditional)
The following is an example of entering “
1. Change the input mode to T9
Stroke mode.
”.
2. Press IGJ to display the
corresponding stroke for “
”.
Using PinYin Mode
Input field
Long press the
corresponding numeric key
to select the desired
character directly from the
Candidate field.
Candidate field
The following is an example of entering “
3. Long press the corresponding key
to complete the selection (in this
case, M).
Note
• Each Traditional/Simplified Chinese mode has own T9
Stroke mode. The screen examples in steps 1 to 3 are
displayed when you select “Traditional Chinese” in the Input
Language option.
34
Entering Characters
”.
1. Press K for the first letter of the reading, then highlight
“l”.
2. Press J for the vowel of the first letter, then highlight
“li”.
Characters with the same reading are displayed in the
Candidate field.
• If you want to use tone options, long
press P instead of step 3 to
display the desired character.
The tone symbols are displayed in
the Candidate field.
Press the corresponding numeric
key (H).
3. Select the desired character.
4. Long press corresponding numeric key to enter the
desired character (in this case, H).
Tip
• When the cursor is placed after the first character, the
Candidate field displays characters most likely to follow.
Entering Characters
35
Chinese User Dictionary
You can create your own word list for T9 Chinese input.
You can enter Chinese characters, alphabet, symbols and
numbers. Only capital letters can be used for acronyms.
Note
• This function is only available when “Input Language” is set
to “Traditional Chinese” or “Simplified Chinese”.
Creating a New Entry
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Select “Add New Word”.
3. Enter new word.
4. Enter acronym.
Editing a Word in the List
1. On the text entry screen, press [Options] and select
2.
3.
4.
5.
36
“Chinese User Dictionary”.
Highlight the desired word.
Press [Options] and select “Edit”.
Modify the entry word.
Modify the acronym.
Entering Characters
Deleting a Word
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Delete”.
4. Press [Yes] or [No].
To Call the Entry
Examples of entry words and acronyms:
The illustration below assumes that the example entry words
and acronyms are already stored.
1. Press M and highlight “S”.
This example is using
T9 PinYin mode
If you long press G, “ ” will
be entered.
You can also select the other
words starting with the same
acronym by pressing b.
Press b
Note
• Acronyms are available for T9 PinYin mode only.
• You can also enjoy word completion or predictive input of the
words stored in the Chinese User Dictionary.
When the first three characters of a word are entered, the
whole word appears at once.
The following is an example of predictive input and word
completion. This example uses words stored in the last section.
1. Press H, K, I and long This example is using
press H to enter “ ”.
Stroke input method
2. The character “ ” appears at for Simplified
.
(Candidates and are taken
from the Chinese User
Dictionary.)
2. Press H and highlight “SB”.
If you long press G, “
will be entered.
”
Entering Characters
37
3. Long press N to enter “
”.
Symbols and Punctuations
1. On the text entry screen, press [Options].
2. Select “Add Symbol”.
4. Long press O to enter “
”.
The sentence is completed
automatically.
Note
• Word completion does not take place if the entry word has
less than four Chinese characters.
• Predictive characters from the Chinese User Dictionary
appear at , so you only have to press O to enter the
characters.
If there are entry words which start with the same characters
such as “
” and “
”, candidates “ ” and “ ”
appear at or , depending on the sequence in which the
words are saved.
38
Entering Characters
The first symbol page is displayed.
In Chinese input mode, the FullWidth Symbols screen is
displayed.
3. Press a or b to switch pages (HalfWidth Symbol and
FullWidth Symbol Pages), or use the numeric keys G
or H.
Tip
• R is a shortcut to launch Symbol Tables.
Using Templates
You can use the phrases registered in Text Templates when
entering characters.
For details on creating the text template, see “Adding Phrases
to Text Templates” on page 87.
1. On the text entry screen, move the cursor to the point
you wish to insert the template.
2. Press [Options] and select “Advanced”.
3. Select “Insert Template”.
4. Select the desired text template.
Copying, Cutting and Pasting Text
1. On the text entry screen, press [Options] and select
7. Select “Paste”.
Insert Phonebook Entries
You can insert the entries registered in Phonebook when
entering characters.
For details on creating the Phonebook entries, see “Call
Manager” on page 41.
1. On the text entry screen, move the cursor to the point
you wish to insert the Phonebook Entry.
2. Press [Options] and select “Advanced”.
3. Select “Insert Phonebook Entry”.
4. Select the desired Phonebook Entry.
The selected entry is inserted.
“Advanced”.
2. Select “Copy” or “Cut”.
3. Move the cursor to the first letter to be copied or to be
cut, then press B.
4. Move the cursor to the last letter to highlight the area,
then press B.
5. Move the cursor to the point you wish to paste the
letters.
6. Press [Options] and select “Advanced”.
Entering Characters
39
Using the Menu
Main Menu
1. Press B in standby.
The Main menu is displayed.
2. Press a, b, c or d to highlight the desired menu,
then press B to access the function.
For details on the menu options, see “List of Menu
Functions” on page 6.
40
Using the Menu
Shortcut Keys
You can access menus by pressing B and digit keys for the
corresponding number on the Main menu. For numbers 10 to
12, press B and P (10), Q (11) or R (12). For menus
with tabs, press d (or c when necessary) to select the
desired tab before pressing the digit keys. See “List of Menu
Functions” on page 6.
Shortcuts are listed in the headings of this user guide.
Example (p. 49):
To Access “Manage Groups” Sub Menu
Manage Groups (M 8-d-d-1)
“Call Manager” → “Phonebook Settings” tab →
“Manage Groups”
Press BN and d twice for the “Phonebook Settings” tab,
then press G.
Example (p. 102): To Access “Tasks” Sub Menu
Tasks (M 3-4)
Press BIJ.
Note
• The shortcut keys work for the first three menu levels only.
Call Manager (M 8)
You can store the phone numbers and Email addresses of your
friends, family and colleagues in the Phonebook.
Your phone can store up to 750 entries. For each entry, you can
enter information including up to 3 phone numbers and 3 Email
addresses. There is a limit to the number of characters that can
be entered for each item. The character limit differs for the
handset memory and SIM/USIM card memory.
Adding a New Entry
The amount of phone numbers that you can store to the SIM/
USIM card is dependent on its capacity. Contact your service
provider for details.
Registering a New Entry (M 8-2)
“Call Manager” → “Phonebook” tab → “Add New”
If you select the “Choice” option for the memory to be used, the
selection is between “To Handset” and “To SIM”.
1. Select the field you wish to fill in, and enter the relevant
information.
2. Press [Save], when finished.
Tip
• To create an entry, at least one field must be filled (“Last
Name”, “First Name”, “Add Phone Number” or “Add Email
Address” for the handset memory; “Name”, “Add Phone
Number” or “Add Email Address” for the USIM memory;
“Name” or “Add Phone Number” for the SIM memory).
Selecting the Storage Memory (M 8-d-d-3-2)
You can choose either the phone or SIM/USIM card memory
locations to store the new entry.
“Call Manager” → “Phonebook Settings” tab →
“Phonebook Settings” → “Save to”
1. Select from “Handset”, “SIM” or “Choice”.
If the selected location is different from the list displayed, a
confirmation message is displayed.
Tip
• “Choice” prompts you to choose the memory every time you
save a new entry.
Call Manager
41
Saving an Unregistered Number (M 8-d-d-3-5)
After the call ends, you can have the confirmation screen
asking you if you wish to register the number to the Phonebook.
“Call Manager” → “Phonebook Settings” tab →
“Phonebook Settings” → “Save Unregistered”
1. Select “Incoming Call” or “Outgoing Call”.
2. Select “On” or “Off”.
Registering My Card (M 8-3)
You can register and edit your own contact as with other
Phonebook entries.
“Call Manager” → “Phonebook” tab → “My Card”
Searching for an Entry
You can search for the desired entry by entering the first few
letters of the name or by sorting the entries.
Changing the List Displayed (M 8-d-d-3-1)
“Call Manager” → “Phonebook Settings” tab →
“Phonebook Settings” → “Source”
1. Select from “Handset”, “SIM” or “Both”.
If the selected location is different from the Phonebook
storage memory, a confirmation message is displayed.
42
Call Manager
Finding a Name
“Call Manager” → “Phonebook” tab → “Phonebook”
1. Enter the first few letters of the name.
The first name corresponding to the entered letters is
highlighted.
Tip
• You can select the Phonebook location from “Handset”,
“SIM” or “Both” before searching.
Sorting the Phonebook List Order (M 8-d-d-3-3)
You can change the listing order of the Phonebook entries to
pinyin order or by different groups.
“Call Manager” → “Phonebook Settings” tab →
“Phonebook Settings” → “View Phonebook”
1. Select “By PinYin” or “By Group”.
Selecting the Search Mode (M 8-d-d-3-4)
“Call Manager” → “Phonebook Settings” tab →
“Phonebook Settings” → “Search Mode”
1. Select “English Search”, “PinYin Search” or “Character
Search”.
Dialling from the Phonebook
Dialling a Service Phone Number (M 8-d-3)
Certain SIM/USIM cards contain service phone numbers that
can be dialled. Contact your SIM/USIM card vendor for more
information. On the Phonebook screen, “Service Dialling No.”
is displayed at the bottom of the list.
“Call Manager” → “Services” tab → “Service Dialling
Number”
1. Select the desired service phone number.
Tip
• If the SIM/USIM card contains only one service phone
number, you can dial it in step 1 by pressing B.
• If no service phone number is stored in the SIM/USIM card,
this menu is not selected.
“Call Manager” → “Phonebook” tab → “Phonebook”
1. Highlight the desired entry and press D (voice call) or
long press D (video calling).
Tip
• If more than one phone number is registered for the entry,
highlight the desired phone number after step 1 and press
D (voice call) or long press D (video calling).
• You can also dial from the details screen of the Phonebook.
On the details screen, select the desired phone number and
press D (voice call) or long press D (video calling).
Call Manager
43
Fixed Dialling Numbers (M 8-d-4)
This option is available on most SIM/USIM cards for mobile
phones. It allows you to configure a SIM/USIM card so that it
can only be used to make calls to numbers on a predefined list.
Note
• This service depends on the SIM/USIM card.
To Enable Fixed Dialling Numbers
“Call Manager” → “Services” tab → “FDN”
1. Enter your PIN2 code.
2. Select “Switch On/Off”.
3. Select “On” to enable this function.
To Add a New Name
“Call Manager” → “Services” tab → “FDN”
1. Enter your PIN2 code.
2. Select “Edit Dial List”.
3. Highlight an entry, press [Options], then select “Add
New”.
4. Add a name and a phone number.
For details on adding a name and phone number, see
“Adding a New Entry” on page 41.
5. Press [Save].
44
Call Manager
Sending a Message from the Phonebook
“Call Manager” → “Phonebook” tab → “Phonebook”
1. Select the desired entry including the phone number or
Email address you wish to use.
2. Highlight the desired phone number or Email address.
3. Press [Options] and select “Create Message”.
For further procedures, see “Creating a New Message” on
page 66.
Sending a Voice Clip Message or Video Clip Message
Using an Address from the Phonebook
“Call Manager” → “Phonebook” tab → “Phonebook”
1. Select the desired entry including the phone number or
Email address you wish to use.
2. Highlight the desired phone number or Email address.
To Add Recipients to a Group
Up to 20 recipients can be registered in each list.
“Call Manager” → “Phonebook Settings” tab →
“Message Groups”
1. Highlight the desired group name.
2. Press [Options] and select “View”.
3. Press [Options] and select “Create Message”.
3. Select “Assign New Entry”.
4. Select the desired entry.
For further procedures, see “Creating a New Message” on
page 66.
Using Mailing Lists (M 8-d-d-2)
You can create a mailing list to send the same message to a
group of recipients at once. Up to 5 groups can be registered.
To Create a New Mailing List
“Call Manager” → “Phonebook Settings” tab →
“Message Groups” → “Add New Group”
1. Enter the group name.
The new group name is displayed following the last group
on the Group List screen.
The detailed screen is displayed.
5. Select the desired phone number or Email address.
Tip
• If you modify the entry assigned in the group, you need to
re-assign it to the group. Highlight the entry, press
[Options], then select “Re-assign Entry” in step 3.
• To remove an entry from the group, highlight the entry, press
[Options], then select “Remove Entry” in step 3.
• To remove a group, highlight a group name and press
[Options] and then select “Delete” in step 2.
Call Manager
45
To Send a Message Using a Mailing List
“Call Manager” → “Phonebook Settings” tab →
“Message Groups”
1. Highlight the desired group name.
2. Press [Options] and select “Create Message”.
For further procedures, see “Creating a New Message” on
page 66.
Editing Phonebook Entries
“Call Manager” → “Phonebook” tab → “Phonebook”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Edit”.
3. Modify the information.
4. Press [Save] when finished.
46
Call Manager
Adding a Thumbnail to Entries
Only Phonebook entries saved to the handset can have
Thumbnails attached to them.
“Call Manager” → “Phonebook” tab → “Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3.
4.
5.
6.
Select “Picture”.
Select “Assign Picture”.
Select the desired picture.
Press [Save] when finished.
Note
• If you delete a picture in the handset memory, the
corresponding thumbnail is also deleted.
• To store a picture right after it was taken, select “Take
Picture” in step 4.
Assigning a Ringtone or a Ring Video Clip to Each Entry
“Call Manager” → “Phonebook” tab → “Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Assign Tone/Video”.
4. Select “For Voice Call”, “For Video Calling” or “For New
Message”.
5. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 7.
6. Select “Preset Sounds” or “Music and Sounds”.
7. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video clip, see
“Assigning a Ringtone for an Incoming Call” on page 111
or “Assigning a Ring Video Clip for an Incoming Call” on
page 112.
8. Press [Save] when finished.
Registering Birthday Item to Calendar
A birthday entered in a Phonebook entry can be registered to
the calendar.
“Call Manager” → “Phonebook” tab → “Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “View”.
3. Press d to display the second tab.
4. Press b to highlight the birthday entry.
5. Press [Options] and select “Set Reminder”.
Tip
• After registration, the data in Calendar can be customised.
For details on customising a schedule entry, see “To Change
the Settings” and etc. on page 97.
• If the Calendar memory is full, “Set Reminder” is not
displayed in step 5.
Call Manager
47
Deleting Phonebook Entries
Managing the Phonebook
Deleting All Phonebook Entries (M 8-d-d-4-3)
“Call Manager” → “Phonebook Settings” tab →
“Advanced” → “Delete All Entries”
1. Select from “Handset Entries”, “SIM Entries” or “Both
Entries”.
2. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 129.
Copying Phonebook Entries between SIM/USIM Card
and Handset (M 8-d-d-4-1)
“Call Manager” → “Phonebook Settings” tab →
“Advanced” → “Copy All Entries”
1. Select “From SIM to Handset” or “From Handset to
SIM”.
Deleting a Phonebook Entry
“Call Manager” → “Phonebook” tab → “Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Delete”.
48
Call Manager
Note
• When you insert the SIM/USIM card into your phone for the
first time and start the Phonebook application, the
confirmation screen is displayed automatically, asking you if
you wish to copy or not. The number of Phonebook entries to
be copied varies depending on the SIM/USIM capacity.
• If the memory space is not enough to save all entries, you
cannot complete copying.
Sending a Phonebook Entry
“Call Manager” → “Phonebook” tab → “Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Send Phonebook”.
3. Select “As Message” or “Via Bluetooth”.
For “As Message”
For details, see “MMS” on page 66.
Manage Groups (M 8-d-d-1)
Different ringtones can be set for each category. If you do not
change a category ringtone, the ringtone assigned in the
Profiles menu is used.
“Call Manager” → “Phonebook Settings” tab →
“Manage Groups”
1. Highlight the desired category.
2. Press [Options] and select “Assign Tone/Video”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 135.
3. Select “For Voice Call”, “For Video Calling” or “For New
Receiving a Phonebook Entry
When the phone receives a Phonebook entry, a confirmation
message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Phonebook. Press [No]
to reject.
4. Select “Assign Tone” or “Assign Video”.
Tip
• For details on entering Bluetooth wireless settings, see
“Connectivity” on page 135.
Message”.
When selecting “Assign Video”, go to step 6.
5. Select “Preset Sounds” or “Music and Sounds”.
6. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video clip, see
“Assigning a Ringtone for an Incoming Call” on page 111
or “Assigning a Ring Video Clip for an Incoming Call” on
page 112.
Call Manager
49
Editing the Category Name
You can edit category names to be assigned to the Phonebook
entries.
“Call Manager” → “Phonebook Settings” tab →
“Manage Groups”
1. Highlight the desired category name.
2. Press [Options] and select “Edit Name”.
3. Modify the name.
Speed Dial List (M 8-d-2)
You can set a maximum of 8 phone numbers in the Speed Dial
list (p. 22).
Setting Phonebook Entries in the Speed Dial List
“Call Manager” → “Services” tab → “Speed Dial List”
1. Select the desired entry.
2. Highlight the desired phone number.
3. Press [Options] and select “Assign”.
4. Select the desired location.
Tip
• The nine digit keys (G - O) correspond to Speed Dial
list numbers.
• When the list is empty, select “Assign” in step 1.
50
Call Manager
To Edit the Speed Dial List
“Call Manager” → “Services” tab → “Speed Dial List”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Re-Assign” (or “Assign”).
Memory Status (M 8-d-d-4-2)
This function helps you to check the memory used in the
Phonebook.
“Call Manager” → “Phonebook Settings” tab →
“Advanced” → “Memory Status”
Multimedia (M 7)
Video Player (M 7-1)
Playing Back Video Clip Files (M 7-1-2)
“Multimedia” → “Video Player” → “My Videos”
1. Select “All Videos” or the desired playlist.
2. Select the desired file.
To pause playback, press B.
To stop playback, press U.
Tip
• You can control the Video Player by using the following keys:
a/b: Increases or decreases the volume.
b (long press): Mutes.
d: Jumps to the next file.
c: Returns to the start of the current file.
cc: Jumps to the previous file.
d (long press): Fast-forwards.
c (long press): Rewinds.
The side keys are always available to change the volume
level.
• Pressing H changes the size of the video display in the
following order: Original, Enlarged, Full Screen, Original and
so on. Note that this does not change the Display Size
setting.
• Pressing Q displays this help information.
Searching a File to Be Played Back
“Multimedia” → “Video Player” → “My Videos”
1. Select “All Videos” or the desired playlist.
2. Press [Options] and select “Search”.
3. Enter a few letters of the title.
Search results are displayed in alphabetical order and the
matching file is highlighted. The search will match the
entered text with any part of the title.
Adding a File to the Playlist
You can add files to a playlist by doing the following.
“Multimedia” → “Video Player” → “My Videos”
1. Select “All Videos” or the desired playlist.
2. Highlight the file you wish to add to the playlist.
3. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on creating a
playlist, see “Adding a New Playlist” on page 52.
Multimedia
51
4. Select the desired playlist.
The file highlighted in step 3 is saved.
To delete files from the playlist, highlight the file in the
playlist and press [Options]. Then select “Delete from
Playlist”.
Adding a New Playlist
You can create a playlist and register desired files in it.
“Multimedia” → “Video Player” → “My Videos”
1. Press [Options] and select “Add New Playlist”.
2. Enter the desired playlist name.
3. Press B.
Note
• To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
Settings
You can select a play mode for “Playback Pattern”, “Backlight”,
“Display Size” and “Sound Effect” when playing back video clip
files.
“Multimedia” → “Video Player” → “Settings”
1. Select from “Playback Pattern”, “Backlight”, “Display
Size” or “Sound Effect”.
52
Multimedia
2. Select from the following:
• “Playback Pattern”
“Normal”:
“Repeat”:
“Repeat All”:
“Random”:
• “Backlight”
“Always On”:
“Always Off”:
“Normal Settings”:
Plays back all files in the
selected folder once and stops
playback.
Continues playback of selected
file in the selected folder.
Plays back all files in the
selected folder.
Plays back files in the selected
folder at random.
Lit while the file is played back.
Unlit while the file is played back
even if a key is pressed.
Works with the main backlight
setting (p. 117).
• “Display Size”
“Original Size”:
“Enlarge”:
“Full Screen”:
• “Sound Effect”
“Surround”:
“Bass”:
Displays the file in its original
size.
Displays the file in an enlarged
size.
Displays the file on the full
screen.
Plays back file with surround
sound.
Plays back file with emphasised
bass sound.
Downloading Video Clip Files (M 7-3-4)
“Multimedia” → “Video Player” → “Download Videos”
The video clip file download site is displayed.
Playing Back the Video Clip Files
To Play Back the Last File (M 7-1-1)
“Multimedia” → “Video Player” → “Last Played Video”
Streaming Player (M 7-2)
You can play back video clip files while downloading them from
the mobile network.
You can also register the address of the Web site as a
bookmark.
“Multimedia” → “Streaming Player”
1. Select “Last Played”, “Enter URL”, “Favourites”,
“Access Log” or “Settings”.
“Last Played”:
Shows the last streaming file.
“Enter URL”:
Enter the desired address of the Web
site. The browser opens, starts
downloading and plays back.
“Favourites”:
The address of the Web site is
registered.
“Access Log”:
Shows a log of the Web sites you have
accessed.
“Settings”:
The backlight and display size settings.
Multimedia
53
Music Player (M 7-3)
Music Player supports MP3, MPEG-4 and 3GPP format sound
files. You can access other menus while listening to sound files.
Creating a New Playlist
You can create your own playlist, storing and managing your
favourite tracks and the order of tracks.
E→ “My Music” → “Playlists”
1. Press [Options] and select “Add New Playlist”.
2. Enter the desired playlist name.
Note
• To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
• You can create up to 99 playlists.
Playing Back Sound Files
E → “My Music”
1. Select the item you wish to play back.
• “All Music”:
All sound files are displayed.
54
Multimedia
• “Artists”:
The names of all artists are displayed.
When an artist is selected, all of their albums are
displayed.
When an album is selected, all of the sound files in the
selected album are displayed.
• “Albums”:
The names of all albums are displayed.
When an album is selected, all of the sound files in the
selected album are displayed.
• “Playlists”:
All playlists are displayed.
When any playlist is selected, all of the sound files in the
selected playlist are displayed.
2. Select the desired sound file.
To pause playback, press B.
To stop playback, press F and go back to standby, then
press F again. Select “Yes” when the pop-up appears.
Note
• Select “My Music” to update the list of available music
tracks.
• You are asked whether or not to play sounds when the Silent
mode is activated.
• To play the last played file, select “Last Played Music”.
“Currently Playing” is displayed when a file is being played
back.
• When you receive a call, playback of the current file is
paused, and you can receive the call. After the call ends, the
paused playback resumes automatically in the background.
Tip
• You can return to the Main menu screen while playing back
the file in the background.
• You can create your playlist by listing only the desired files
(p. 54).
• Sound files in both the handset and the memory card are
displayed in a single view.
• You can select the playback pattern in step 2. Press
[Options] and select “Playback Pattern”.
“Normal”:
Plays back all files in the selected folder once
and stops playback.
“Repeat”:
Continues playback of selected file in the
selected folder.
“Repeat All”: Plays back all files in the selected folder.
“Random”:
Plays back files in the selected folder at
random.
• While in the Music Player, the player can be controlled by
using the following keys:
a/ b : Increases or decreases the volume.
b (long press): Mutes.
d: Jumps to the next file.
c: Returns to the start of the current file.
cc: Jumps to the previous file.
d (long press): Fast-forwards.
c (long press): Rewinds.
F: Plays back the file in the background.
The side keys are always available to change the volume
level.
Sorting Files
E → “My Music” → “All Music”
1. Press [Options] and select “Sort”.
2. Select “By Title”, “By Artist”, “By Album” or “By Genre”.
Sort results are displayed.
Multimedia
55
Adding a File to the Playlist
You can add files to a playlist by doing the following.
E → “My Music” → “All Music”
1. Highlight the file you wish to add to the playlist.
2. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on adding a playlist,
see “Creating a New Playlist” on page 54.
3. Select the desired folder.
The file highlighted in step 1 is saved.
To delete files from the playlist, highlight the file in the
playlist and press [Options]. Then select “Delete from
Playlist”.
Note
• You can store up to 99 files in one playlist. However, the total
number of files stored on your phone cannot exceed 350
files.
Downloading Music Files (M 7-3-3)
E → “Download Music”
The music file download site is displayed.
56
Multimedia
FM Radio (M 7-4)
You can connect to the FM Radio service.
Selecting a Radio Station
“Multimedia” → “FM Radio”
1. Press [Options] and select “Select Station”.
2. Highlight the desired radio station and press B.
Tip
• You can play back the program in the background. Press
[Options] and select “Play in Background” while the program
is played back.
• A headset radio aerial is necessary to use this service.
Saving a Radio Station
“Multimedia” → “FM Radio”
1. Press [Options] and select “Save Station”.
2. Press [Options] and select “Assign”.
Searching for Stations
“Multimedia” → “FM Radio”
1. Press [Options] and select “Search”.
2. Select “Auto Search”.
3. Select “Search Upwards” or “Search downwards”.
Note
• You need to plug in the headset when using the FM Radio.
Tip
• You can scan and save the stations automatically by
selecting “Update station list” in step 2.
• You can also select the desired station by entering the
frequency directly. Select “Enter Frequency” in step 2.
Setting FM Radio Playback
“Multimedia” → “FM Radio”
To Switch the Output
To Switch between Stereo and Monaural
1. Press [Options] and select “Detailed settings”.
2. Select “Switch to Stereo”.
To Switch the Station List
1. Press [Options] and select “Detailed settings”.
2. Select “Switch station list”.
3. Select the desired list.
Mobile TV
You can connect to the Mobile TV service by pressing T.
Note
• To use Mobile TV on your phone, you need to be in an area
of 3G coverage.
• To use Mobile TV on your phone, you need to purchase a
subscription package from your operator.
1. Press [Options] and select “Detailed settings”.
2. Select “Sound output settings”.
3. Select “Headset” or “Loudspeaker”.
To Activate the Auto Switch Off
1. Press [Options] and select “Detailed settings”.
2. Select “Auto Switch Off”.
3. Select the desired option.
Multimedia
57
Camera (M 5)
Your phone has a built-in digital camera that allows you to take
pictures and record video clips wherever you are. This section
starts with basic functions and operational procedures to take,
save and send pictures and video clips, followed by common
and unique functions to camera and video modes.
Taking Pictures
“Camera”
1. Press B to take the picture.
The shutter sounds and the still image of the taken picture
is displayed.
2. Press [Save].
The taken picture is saved in Gallery.
To cancel, press [Cancel].
To send the taken picture, press B in step 2.
58
Camera
Note
• When the video camera is launched, press [Options] and
select “Go to Photo Camera”, or press c.
• When you try to send a picture that has too large a file size,
the picture size is resized for the message. The original sized
picture is saved in Gallery.
Tip
• You can activate the camera by long pressing X in
standby. Simply press X to take pictures, and start and
stop recording.
• You can lock the focus by pressing D or pressing X
halfway before taking a picture or recording a video clip.
Recording Video Clips
You can record a video clip with your phone.
“Camera”
The preview is displayed on the screen.
When in photo camera mode, press d to switch to video
camera mode.
1. Press B.
2. To stop recording, press B.
3. Select “Save”.
The video clip is saved in Gallery.
To view the preview before saving, select “Preview”.
To send the video clip, select “Save and Send”.
For further procedures, see “Creating a New Message” on
page 66.
Common Functions in the Photo and
Video Camera Modes
Using the Digital Zoom Function
To Adjust the Zooming Ratio
1. Press a or b.
Once the phone has returned to standby, the zoom settings
return to default.
Adjusting the Exposure
“Camera” → [Options] → “Exposure”
1. Press a (Bright) or b (Dark).
: (Bright → Normal → Dark)
Once the phone has returned to standby, the brightness
settings return to default.
Note
• You can only send video clips when “For Message” is
selected for the recording time. For details, see “Selecting
the Recording Time and Picture Size” on page 65.
Camera
59
Selecting the Picture or Video Quality
Select the appropriate option.
“Camera” → [Options] → “Picture Quality”
“Camera” → [Options] → “Video Quality”
1. Select the desired picture or video quality.
: Super Fine
: Fine
: Normal
Note
• The better quality you select, the larger the file size
becomes.
Using the Self-Timer
Select the appropriate option.
“Camera” → [Options] → “Modes” → “Self-timer”
1. Select “2sec”, “5sec” or “10sec”.
When you select one of these options, the corresponding
indicator (“ ”, “ ”, or “ “) is displayed on the screen.
Select “Off” to cancel the self-timer.
60
Camera
Switching the Focus Mode
“Camera” → [Options] → “Modes” → “Focus”
1. Select the desired option.
: Auto Focus
: Manual Focus
: Macro
Switching the Display Direction
You can switch the display direction between portrait and
landscape.
“Camera” → [Options] → “Settings” → “Portrait /
Landscape”
Selecting the Storage Memory
Select the appropriate option.
“Camera” → [Options] → “Settings” → “Save New
Pictures”
“Camera” → [Options] → “Settings” → “Save New
Videos”
1. Select the desired location from “To Handset Memory”,
“To Memory Card” or “Choice”.
Note
• If you select “Choice”, select the desired location every time
you save.
Auto Save
You can set the phone to save pictures and video clips
automatically.
“Camera” → [Options] → “Settings” → “Auto Save”
1. Select “On” or “Off”.
Selecting the Anti-flicker Mode
“Camera” → [Options] → “Settings” → “Anti-flicker”
1. Select “Mode 1: 50Hz” or “Mode 2: 60Hz”.
Note
• Vertical stripes may occur on the picture due to the light
source. Change the anti-flicker mode to rectify.
Switching between the Photo and Video Camera Modes
You can switch between the photo and video camera modes by
pressing c or d.
Select the appropriate option.
“Camera” → [Options] → “Go to Video Camera”
“Camera” → [Options] → “Go to Photo Camera”
You can also switch between the Internal (sub) camera and
External (main) camera.
Using the Help Function
“Camera” → [Options] → “Help”
Camera
61
Common Shortcut Keys
If multiple options exist, they switch each time you press each
of the following keys.
Photo Camera
D
Video Camera
Focus Lock
G
Zoom Max/Min
H
Switches between internal and external cameras
I
Focus
J
Save New Pictures
K
Picture Size
Save New Videos
Picture Size
L
M
Microphone
Picture Quality
N
O
Q
Switches between Portrait and Landscape
Switches Viewfinder
between with and without
indicators
P
62
Video Quality
Self-timer
Switches the display
modes in the Preview
screen
Exposure
Camera
Note
• The “Switches the display modes” option is available in
“Preview” before you save a video clip. See “Recording Video
Clips” on page 59.
Functions in Photo Camera Mode
Selecting the Picture Size
You can select the size of pictures. All taken pictures are saved
in the JPEG format.
“Camera” → [Options] → “Picture Size”
1. Select the desired size.
(External Camera)
1200 × 1600 dots/
960 × 1280 dots/
768 × 1024 dots/480 × 640 dots/
240 × 320 dots/120 × 160 dots
(Internal Camera)
240 × 320 dots/120 × 160 dots
Continuous Shoot
There are various modes for taking continuous shots.
“Camera” → [Options] → “Modes” → “Continuous
Shoot”
1. Select the desired mode.
The following continuous shoot modes are available:
“Off”:
The continuous shoots are
cancelled.
“4 Pictures”/“9 Pictures” ( / ):
Takes 4 or 9 pictures
continuously.
After selecting this mode, select
from “Fast”, “Normal”, “Slow”
or “Manual”.
“Overlapped” ( ):
Overlaps continuous pictures
into one picture and makes an
afterimage.
After selecting this mode, select
“Fast” or “Normal”.
Note
• When you select “Manual” to take continuous pictures,
press B manually at the desired speed.
• When the Timer and Continuous Shoot functions are
simultaneously set, “ ” and “ ” (for “2sec” and “4
Pictures”, for example) are alternately displayed.
• You cannot use the Continuous Shoot function for picture
sizes larger than 480 × 640 dots. “9 Pictures” and
“Overlapped” are not available for picture sizes larger than
240 × 320 dots.
Camera Effects
You can select from various camera effects.
“Camera” → [Options] → “Modes” → “Camera
Effects”
1. Select from “Sepia”, “Monochrome”, “Negative” or
“Sketch”.
Note
• You cannot use the Camera Effects function for picture sizes
larger than 240 × 320 dots.
Camera
63
Selecting a Frame
You can select the frame from preset patterns or Pictures.
“Camera” → [Options] → “Modes” → “Add Frame”
1. Select “Preset Frames” or “Pictures”.
2. Select the desired frame.
The selected frame is confirmed on the display.
3. Press B.
Note
• Images larger than 240 dots [W] × 320 dots [H] cannot be
used.
Using the Full Screen
You can display the preview on the full screen without the soft
key area and indicator area.
“Camera” → [Options] → “Settings”
1. Select “Full Viewfinder”.
To return to the normal viewfinder, select “Normal
Viewfinder”.
64
Camera
Selecting the Shutter Sound
“Camera” → [Options] → “Settings” → “Shutter
Sound”
1. Select the desired shutter sound from 3 preset patterns.
To play back the shutter sound, press [Play] in step 1.
Note
• Continuous Shoot uses the specialised shutter sound that
cannot be changed using the above settings.
• The shutter sound remains active even when “General
Volume” (p. 110) is set to “Silent” to prevent unauthorised
use.
Functions in Video Camera Mode
Selecting the Recording Time and Picture Size
“Camera” → [Options] → “Record Time”
1. Select “For Message” or “Extended Video”.
For Message ( ):
Limits the size to send a
message depending on service
providers.
Extended Video ( ):
Less than 30 minutes
(depending on the memory).
2. Select the desired picture size.
If “For Message” is selected, select “Large(QCIF)” or
“Small(SubQCIF)”.
If “Extended Video” is selected, select “Large(QCIF)” or
“Small(SubQCIF)”. When using the external camera,
“QVGA(asf)” is also available.
Recording Video Clips with Sound
To record a video clip with sound, the microphone needs to be
activated.
“Camera” → [Options] → “Settings” → “Microphone”
1. Select “On” or “Off”.
Note
• The microphone is already turned on in the default setting.
Select “Off” to record a video clip without the sound.
• The file size of a video clip can be reduced if the sound is not
recorded.
Video Encoding
“Camera” → [Options] → “Settings” → “Video
Encode”
1. Select the appropriate format.
Note
• If you select “For Message” for the recording time, the file
size is limited depending on the service provider. Therefore,
the quality is also limited for the setting.
• “Save and Send” is not displayed after recording in the
Extended Video mode.
Camera
65
Messages (M 4)
Your phone allows you to send and receive text, multimedia and
Email. It is compatible with most POP3 Email providers.
SMS
SMS allows you to send text messages up to 765 characters
long. If you send a message of more than 160 characters, it is
split into several segments.
MMS
With MMS, you can send images, sound or video to brighten
someone’s day. Messages of up to 300 KB with images,
sound, or video clips can be sent and received.
Email
Email allows you to send messages of up to 300 KB.
Note
• Some MMS functions may not always be available
depending on your network. Contact your service provider for
more information.
• Maximum message size varies depending on the restrictions
set by the service provider.
66
Messages
Creating a New Message (M 4-1)
(SMS/MMS)
“Messages” → “Create Message” → “Message”
(Email)
“Messages” → “Create Message” → “E-Mail”
1. Select the recipient field.
2. Select the desired method to enter the recipient’s
details.
3. For MMS, enter or select the Email address or phone
number from the Phonebook. For SMS, enter or select a
phone number. For Email, enter or select an Email
address.
• To add multiple Email addresses or phone numbers,
highlight the recipient field, press [Options], and then
select “Add Recipient”. Enter or select the Email
address or phone number from the existing Phonebook.
• To change the recipient types, press [Options], select
“Add Recipient” and highlight the desired recipient.
Press [Options] and select “Change to To”, “Change to
Cc” or “Change to Bcc”.
• To add a subject, highlight the subject field and press
B. Then enter the subject in the subject entry screen
and press B.
4. Place the cursor in the message field.
5. Press B to display the message entry screen.
Enter the message and press B.
6. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
After the message is sent, the message is moved to the
Sent box.
Note
• When you create an SMS/MMS message, the mode is
automatically switched to MMS in the following cases:
•When “Enter Email Address” in [Options] is selected for
recipient fields.
•When a subject is entered.
•When the size of entered text has exceeded the SMS size
limit.
To Add a Slide Show
1. Perform steps 1 to 5 in “Creating a New Message” on
page 66.
2. Press a to highlight your message or other inserted
item such as a picture or sound file.
3. Press [Options] and select “Add Slide”.
4. Select “Add Slide After” or “Add Slide Before”.
5. Enter another message.
If you wish to set the duration of each slide, highlight your
message or other inserted item such as a picture or sound
file. Press [Options] and select “Slide Duration”, then select
the desired duration. Repeat steps 2 to 4 to add more
slides.
Tip
• You can create messages up to 300 KB. Each slide can
contain one picture and/or one sound file or video clip.
Tip
• To send the same message to a group of recipients, select
“Select Message Group” in step 2, then select the desired
group name. For details on creating a mailing list, see “To
Create a New Mailing List” on page 45.
Messages
67
To Attach Data
1. In step 6 in “Creating a New Message” on page 66,
press [Options] and select “Insert Item”.
2. Select “Picture”, “Sound”, “Video”, “Attach Contact”,
“Attach Appointment” or “Others”.
When selecting “Attach Contact” or “Attach Appointment”,
go to step 4.
3. Select the desired option and then select the desired file.
If you wish to attach pictures, sounds or video clips that are
saved, select “Saved Picture”, “Saved Sound” or “Saved
Video”.
If you wish to take new pictures, record sounds or video
clips, select “Take Picture”, “Record Voice” or “Record
Video”.
4. Select the desired data.
If you wish to select your own Phonebook entry, select “My
Card”.
When attaching an appointment, select the desired day
including a schedule entry you wish to add and select the
desired schedule entry.
Note
• When attaching JPEG files, select the appropriate resize
option, as the maximum message size for sending varies
depending on the service provider.
68
Messages
To Remove or Replace Attachments
1. In step 6 in “Creating a New Message” on page 66,
press [Options] and select the corresponding remove
option for each attachment.
Using the Sending Options
You can use the message sending options for each type of
message.
1. Press [Options] and select “Messaging Settings”.
• “Delivery Report” (“On”, “Off”) (SMS/MMS): Enables or
disables Delivery Report when the message is
successfully sent to the recipient.
• “Expiry Time” (“Maximum”, “1 hour”, “12 hours”, “1
day”, “1 week”) (SMS/MMS): Sets Expiry Time for a
message to be saved in the server.
• “Priority” (“High”, “Normal”, “Low”): Prioritises
composed messages.
• “Read Report” (“On”, “Off”) (SMS/MMS): Confirms
whether or not a report is sent notifying the sender that
the message has been read.
2. Press [Options] and select “Send”.
After the message is sent, the message is moved to the
Sent box.
Tip
• To save the message without sending, press [Options] and
select “Save to Drafts” in step 4 in “Creating a New
Message” on page 66.
• You can send the following items attached to multimedia
messages. Details are given in the following sections.
• Gallery data
• Phonebook entry
• Schedule entry created by Calendar, etc.
• You can use the template option to help you compose
messages. For details on using this option, see “Using
Templates” on page 39.
Note
• The current message size displayed while you are creating
the message is an approximation.
• If a message cannot be sent for some reason, the message
stays in the Outbox and the “ ” is displayed in standby.
Messages
69
Sending a Message in the Drafts Box (M 4-4)
“Messages” → “Drafts”
1. Select the desired tab, SMS/MMS or Email.
2. Press [Options] and select “Edit & Send”.
3. Modify the message, if necessary.
4. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
Sending a Voice Clip Message or Video Clip Message
You can record a new voice or video clip when creating a new
message.
Select the appropriate option.
“Messages” → “Create Message” → “Voice Message”
“Messages” → “Create Message” → “Video Message”
1. Press B to start recording.
2. Press B to stop recording.
3. Select “Accept” to attach to the new message.
4. Select “To Handset Memory” or “To Memory Card” as
the destination to save.
For further procedures, see “Creating a New Message” on
page 66.
Tip
• You can play back voice or video clips from Gallery.
70
Messages
Reading a Message
Messages you receive are saved in the Inbox.
“Messages” → “Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Select the message you wish to view.
Storing the Phone Number of a Sender in the Phonebook
“Messages” → “Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Highlight the message from which you wish to store the
phone number or Email address.
3. Press [Options] and select “Save Address”.
The new Phonebook entry screen including the phone
number is displayed. For details on creating a new
Phonebook entry, see “Adding a New Entry” on page 41.
Calling the Phone Number of a Sender Embedded in the
Message
“Messages” → “Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Highlight the message containing the phone number you
wish to dial.
3. Press [Options] and select “Call Sender”.
Downloading a Single MMS
“Messages” → “Inbox”
1. Select the SMS/MMS tab.
2. Highlight the message alert (
) you wish to download.
3. Press [Options] and select “Download”.
Tip
• You can download multiple messages at the same time. See
“Downloading Multiple MMS”.
Downloading Multiple MMS
“Messages” → “Inbox”
1. Press [Options] and select “Multiple Select”.
2. Select the desired message alerts, press [Options] and
select “Select” or “Select All”.
3. Press [Options] and select “Download”.
The selected messages are downloaded at the same time.
Messages
71
Replying to a Message or to All Addresses
“Messages” → “Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Highlight the message the sender of which you wish to
reply to.
3. Press [Options] and select “Reply” (to sender only) or
“Reply All” (to all other recipients listed in the original To
or Cc lists).
4. Select “Reply” or “Reply with History”.
5. Enter the message.
6. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
Forwarding a Message
“Messages” → “Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Highlight the message you wish to forward.
3. Press [Options] and select “Forward”.
4. Perform steps 1 to 5 in “Creating a New Message” on
page 66.
72
Messages
Sorting the Messages in the List
“Messages” → “Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Press [Options] and select “View Settings”.
3. Select “Sort”.
4. Select the desired sort option.
Cell Broadcasts (M 4-9)
You can receive cell broadcast messages or general messages
such as weather forecasts and traffic reports. This information
is broadcast to subscribers in certain network areas.
This function may not be available on all mobile phone
networks. Contact your service provider for more information.
Enabling/Disabling Cell Broadcasts
“Messages” → “Cell Broadcasts” → “Switch On/Off”
1. Select “On” or “Off”.
Reading Cell Broadcast Messages
“Messages” → “Cell Broadcasts” → “Read Messages”
1. Select the desired subject.
2. Scroll the screen to read the message.
3. Press U.
Setting Languages for Cell Broadcast Messages
“Messages” → “Cell Broadcasts” → “Settings” →
“Language”
The current language is displayed.
1. Press B to check.
2. Press [Save].
Subscribing to Cell Broadcasts
Select the page of the cell broadcast message that you want.
“Messages” → “Cell Broadcasts” → “Settings” → “Set
Info Subjects”
1. Press [Options] and select “Add/Remove”.
2. Select the desired subject.
3. Press [Save].
Tip
• If the desired subject is not in the list that appears in step 2,
select “Create Subject” in step 1, then enter the subject code
to add a page. For details on the subject code, contact your
service provider.
Messages
73
Area Info (M 4-10)
Messaging Settings (M 4-11)
The Area Info is the message information that operators send
to subscribers in certain areas.
When you receive Area Info, the message (area code) is
displayed in standby.
General Settings
“Messages” → “Messaging Settings” →
“General Settings”
1. Select the item you wish to set up.
• “Signature”:
Enables or disables “Auto Insert”. Select “Edit” to edit
current signature.
• “Auto Delete”:
Deletes the oldest message automatically, when the
Inbox, Sent or Both (Inbox and Sent) is full.
• “Message List View”:
Switches the mailbox listing (“Two-line”, “One-line”).
• “Scroll Unit”:
Scroll through messages by “Single Line”, “Half Page”
or “Whole Page”.
• “Message Type”:
Sets the type of message to send by default when a
message is composed. When set to “Free”, the
message is sent automatically either as an SMS or MMS
as appropriate.
Enabling/Disabling Area Info
“Messages” → “Area Info”
1. Select “On” or “Off”.
Note
• This function may not be available on all mobile phone
networks. Contact your service provider for more
information.
• If Area Info is set to “On”, the standby time will decrease.
74
Messages
SMS Settings
“Messages” → “Messaging Settings” →
“SMS Settings”
1. Select the item you wish to set up.
• “Delivery Report”:
Enables or disables Delivery Report request.
• “Signature”:
Enables or disables “Auto Insert”. Select “Edit” to edit
current signature.
• “Automatic Resend”:
Tries to resend the failed SMS/MMS message up to two
times (“On” or “Off” selection).
• “Expiry Time”:
This indicates the number of days and hours for which
a message you send may remain undelivered to the
message recipient. During this period, the message
service centre will continually try to deliver the message
to the recipient.
• “Message Centre”:
Enter the message centre number. Up to 2 numbers can
be registered.
If you wish to enter a country code for a message to an
international number, long press Q until a + sign is
displayed.
• “Message Format”:
Sets the message format to be used when creating a
new message.
• “Reply Path”:
Enables or disables adding a reply path to the message.
• “Optimisation”:
When set “On” (default), double-byte characters such
as European characters with an accent are converted
into single-byte characters and sent.
When “Off”, double-byte characters are sent as
displayed.
Please note that you may be charged double for doublebyte characters sent in an SMS when Optimisation is set
“Off”.
• “Connection Type”:
Sets the preferred connection type (“GPRS Preferred”,
“CSD Preferred”).
Messages
75
MMS Settings
“Messages” → “Messaging Settings” →
“MMS Settings”
1. Select the item you wish to set up.
• “MMS Accounts”:
Select the desired account or select “Create New” to
enter the following settings.
“Profile Name”:
MMS profile name (Unique
name)
“Proxy”:
Proxy setting for MMS
“Relay Server URL”: MMS relay server
• “Home Download”:
Controls the message download timing inside your
network area.
“Always Download”: Downloads messages
immediately from the server.
“Always Defer”:
Defers message download.
• “Roaming Download”:
Controls the message download timing when roaming
outside of your network.
“Always Download”: Downloads messages
immediately from the server.
“Always Defer”:
Defers message download.
76
Messages
• “Delivery Report”:
Enables or disables Delivery Report request.
• “Signature”:
Enables or disables “Auto Insert”. Select “Edit” to edit
current signature.
• “Automatic Resend”:
Tries to resend the failed SMS/MMS message up to two
times (“On” or “Off” selection).
• “Delivery Report Allow”:
Confirms whether or not a report is sent notifying the
sender when you receive a message.
• “Read Report”:
Enables or disables Read Report request.
• “Read Report Allow”:
Enables or disables Read Report Allow when the
recipient is required to inform the sender that the
message has been read.
• “Expiry Time”:
This indicates the number of days and hours for which
a message you send may remain undelivered to the
message recipient. During this period, the message
service centre will continually try to deliver the message
to the recipient.
• “Slide Duration”:
Sets the duration of the slide.
• “Slide Auto Play”:
Enables or disables Slide Auto Play.
• “Send File Settings”:
Sets whether or not to send and save the file settings.
• “Max Message Size”:
Sets the maximum message size for sending and
disables sending MMS messages exceeding that size.
• “Creation Mode”:
When set to “Free”, you can attach files of any format to
the mail. When set to “Restricted”, only certain formats
and message sizes can be attached. The “Restricted”
setting has priority over “Max Message Size”.
• “Emoticons”:
Enables or disables the Emoticons when entering text.
• “Hide Number”:
Sets whether to show or hide the sender’s address.
• “Delivery Time” (“Immediate”, “1 hour”, “12 hours”, “1
day”, “1 week”):
Sets the time the message is delivered after the Send
key is pressed.
• “Anonymous Rejection”:
Enables or disables the rejection of messages from
anonymous senders.
To Activate the MMS Account Profile
1. Select “MMS Accounts”.
2. Select the desired profile you wish to activate.
Messages
77
Email Settings
“Messages” → “Messaging Settings” →
“Email Settings”
To Set an Email Account
1. Select “Email Accounts” and highlight the preset Email
account.
You can also create a new account.
2. Press [Options] and select “Edit”.
3. Select the item you wish to set up.
“Account Name”:
“Incoming Server”:
“Outgoing Server”:
“Access Point”:
“Email Address”:
78
Messages
Email account name (Unique
name)
Server name, user ID, password,
port number, APOP
authentication and encryption
for the incoming server
Server name, user ID, password,
port number, SMTP
authentication and encryption
for the outgoing server
Access point for Email
Email address
“Advanced Settings”:
Your name, signature, download
interval, download
configuration, maximum
download limit, save sent
messages
To Activate the Email Account Profile
1. Select “Email Accounts”.
2. Select the desired profile you wish to activate.
Browser (M 2)
Your phone is already configured to access SmarTone iN! and
the mobile internet.
SmarTone iN! is a mobile internet portal which is your gateway
to a new world of information, games, music and services.
Because your phone uses 3G (UMTS), it has a system that is
faster than previous ways of getting mobile information. Also,
the connection is ‘always on’ which means there is no need to
wait for dialling up. You only have to pay for the data you send
or receive, not how long you’re connected.
Your phone contains a WAP browser used for surfing on the
Mobile Internet, where you can get a lot of useful information.
Normally, pages are designed for a mobile phone.
Your phone is already setup to SmarTone iN! site for WAP/MMS
Settings.
Main Menu
“Browser” → “Homepage”
The SmarTone iN! service page is displayed.
“Browser” → “Go to URL”
The URL entry screen is displayed. You can type in the URL of
a site directly.
“Browser” → “Bookmarks”
See page 80.
“Browser” → “Alert Inbox”
WAP Push alerts are displayed.
“Browser” → “My Saved Page”
You can view all the screenshots that have been saved onto the
handset memory.
“Browser” → “Access History”
The history of pages you have recently browsed is displayed.
“Browser” → “Browser Settings”
See page 81.
Browser
79
Navigating a WAP or Web Page
• a b c d:
Moves the highlight around in the screen.
• A:
Launches the option menu if it has not
been launched.
Used to select an option from the option
menu.
• B:
Executes the highlighted item in the
screen.
• C:
Visits “SmarTone iN! ” by opening the
browser when in standby.
Moves to previous page when the
browser is active.
• F (short press): Exits the browser.
(long press): Turns off the phone.
80
Browser
Editing Bookmarks (M 2-3)
“Browser” → “Bookmarks”
1. Select the desired URL, and press [Options].
You can edit the list of Bookmarks by the following options:
(When a bookmark is highlighted)
“Open”:
Opens a bookmark.
“Edit”:
Edits URL address of the
bookmark.
“Add New Bookmark”: Creates new bookmarks.
“Create Folder”:
Creates new folders.
“Send via SMS”:
Sends the URL address to
recipients.
“Move”:
Moves bookmarks to another
location or into a folder.
“Details”:
Displays detailed information of
the WAP/web page.
“Delete”:
Deletes a bookmark.
“Delete All”:
Deletes all bookmarks.
(When a folder is highlighted)
“Select”:
Selects the folder.
“Add New Bookmark”: Creates new bookmarks.
“Create Folder”:
Creates new folders.
“Move”:
Moves folder and bookmarks in
the folder to another location.
“Rename Folder”:
Renames the folder.
“Delete”:
Deletes the folder and
bookmarks in the folder.
“Delete All”:
Deletes all folders and
bookmarks.
(When there are no bookmarks)
“Add New Bookmark”: Creates new bookmarks.
“Create Folder”:
Creates new folders.
Browser Settings (M 2-7)
“Browser” → “Browser Settings”
“Font Size”:
Sets the font size for browsing.
“Scroll Step”:
Sets the speed of scrolling.
“Send Referrer”:
Enables or disables the
notification of the referrer.
“Cookies”:
Adjusts the setting of cookies.
“Downloads”:
Sets whether or not to show
images when accessing the
WAP/web page.
“Security”:
Adjusts the security prompt
level.
“WAP Push”:
Sets whether you need
confirmation for push message.
“Download to”:
Sets the download preferred
location.
Browser
81
Browser Options when Online
You can use the various options of the browser.
C → [Options]
“Select”:
Selects a WAP page.
“Open This Frame”:
Opens the selected frame.
(This option is available only
when a frame page is
displayed.)
“Home”:
Goes to the homepage.
“Forward”:
Goes to the next page.
“Reload Page”:
Reloads the WAP page to get
updated information.
“Bookmarks”:
See page 80.
“Save This Page”:
Saves the currently viewed
browser screenshots to the
handset memory.
“Save Items”:
Saves items from the browsing
pages.
“Go to URL”:
Allows you to type in the URL of
a site directly. Handset browser
will go to the web/WAP page
that you entered.
82
Browser
“Access History”:
Shows the history where you
have browsed.
“Complete Page Display”: Allows the browser to display in
complete page mode or Virtual
Screen mode.
“Zoom In/Out”:
Zooms in on or out from the
browsing page. (This option is
available only when “Complete
Page Display” is set to “ON”.)
“Advanced”:
Displays the advanced option
menu of the browser.
“Page Over View”:
Shrinks the view of the browsing
page and displays the entire
page. To display a specific area
in normal view, use a/b/c/
d to move to the desired
location and press B.
“Help”:
Displays the browser help.
“Exit”:
Exits the browser.
The Advanced Options
C → [Options] → “Advanced”
Sends the URL of this WAP/web
“Send URL via SMS”:
page via SMS.
“Details”:
Shows detailed information of
the WAP/web page.
“Delete Browser Data”: Deletes the browser data. You
can clear the cache/cookies/
history/authentication
information.
“Search This Page”:
Searches for specific words in
the WAP/web page.
“Jump to Top”:
Jumps to the top of the WAP/
web page.
“Jump to Bottom”:
Jumps to the bottom of the
WAP/web page.
“Copy Text”:
Copies the text on the WAP/web
page.
“Browser Settings”:
Displays the settings menus
(p. 81).
Browser
83
Gallery (M 6)
Gallery contains all your pictures, music and videos. Also
included in Gallery are Text Templates. You can also transmit
pictures, sounds and video clips via Bluetooth wireless
technology to other Bluetooth-enabled devices.
Pictures (M 6-1)
Pictures that are taken by your cameraphone or images that
are downloaded from mobile Internet sites can be viewed,
edited and organised.
Viewing Pictures
“Gallery” → “Pictures”
1. Select the file you wish to view.
The selected picture is displayed.
Note
• To switch between viewing handset or memory card content,
select the first item in the options menu.
Tip
• You can scroll through your pictures with P and R.
• To change the default view of pictures (list or grid), press
[Options], select “Manage Items” and then select “Change
List View”.
84
Gallery
Using Images as Wallpaper
“Gallery” → “Pictures”
1. Highlight the file you wish to use as wallpaper.
2. Press [Options] and select “Set as Wallpaper”.
Editing Pictures
“Gallery” → “Pictures”
1. Highlight the file you wish to edit.
2. Press [Options] and select “Edit”.
3. Select “Picture editor” or “Composite”.
4. Select the desired option.
Note
• “Picture editor” may not be available depending on the
original picture and copyright issued.
Saving an Image to Phonebook Entries
This option can be only used for pictures saved in the handset
memory.
“Gallery” → “Pictures”
1. Highlight the file you wish to add to Phonebook.
2. Press [Options] and select “Add to Contacts”.
To overwrite, select the data you wish to save.
To save as a new entry, select “<As New Contact>”.
For details on entering a name, see “Adding a New Entry”
on page 41.
Downloading Picture Files
“Gallery” → “Pictures” → “Download More”
The picture file download site, SmarTone iN!, is displayed.
Videos (M 6-2)
Video clips that are recorded by your phone’s video camera or
video clips that are downloaded from mobile Internet sites can
be viewed and organised.
Playing Back Video Clip Files
“Gallery” → “Videos”
1. Select the file you wish to play back.
To pause playback, press B.
To resume, press B again.
To stop playback, press U.
Note
• To switch between viewing handset or memory card content,
select the first item in the options menu.
Using a Video Clip as a Ring Video Clip
You can set your video clip to play back when the phone rings.
“Gallery” → “Videos”
1. Highlight the desired video clip.
2. Press [Options] and select “Set as Ring Video”.
Tip
• For other option menus, see “Common Option Menus” on
page 88.
Downloading Video Clip Files
“Gallery” → “Videos” → “Download More”
The video clip file download site, SmarTone iN!, is displayed.
SD Videos (M 6-3)
Video clips with the “ASF” format that are recorded by a video
camera or downloaded from mobile Internet sites can also be
managed with SD Videos.
“Gallery” → “SD Videos”
1. Select the desired file.
To pause playback, press B.
To resume, press B again.
To delete a file, highlight the file, press [Options] and select
“Delete”.
Gallery
85
Note
• In order to manage video clips with SD Videos, perform
recording as follows:
[Options] → “Record Time” → “Extended Video” →
“QVGA(asf)”.
Music and Sounds (M 6-4)
The downloaded sound files and the AMR data recorded by
Voice Recorder are managed in Music and Sounds. The default
ringtones are not contained within Music and Sounds. Only the
sound files that can be played back on the phone are stored in
Music and Sounds.
Playing Back Sound Files
“Gallery” → “Music and Sounds”
1. Select the file you wish to play back.
To stop playback, press U.
Note
• Playback may not be available for some sound files.
• To switch between viewing handset or memory card content,
select the first item in the options menu.
Using the Sound Files as a Ringtone
“Gallery” → “Music and Sounds”
1. Highlight the file you wish to use as a ringtone.
2. Press [Options] and select “Set as ringtone”.
86
Gallery
Tip
• For other option menus, see “Common Option Menus” on
page 88.
Downloading Sound Files
“Gallery” → “Music and Sounds” → “Download More”
The sound file download site, SmarTone iN!, is displayed.
Themes (M 6-5)
You can easily customise the display by using the theme files.
Viewing Previews
“Gallery” → “Themes”
1. Highlight the theme file you wish to preview.
2. Press B.
The selected theme file is displayed.
Note
• To switch between viewing handset or memory card content,
select the first item in the options menu.
Setting Theme
“Gallery” → “Themes”
1. Select the desired theme file.
The selected theme file is set as the default theme.
Tip
• Even after a theme is set, you can set a wallpaper regardless
of the set theme. In this case, the other items follow the set
theme.
• For other option menus, see “Common Option Menus” on
page 88.
Downloading Theme Files
“Gallery” → “Themes” → “Download More”
The theme file download site, SmarTone iN!, is displayed.
Editing Text Templates
“Gallery” → “Text Templates”
1. Highlight the text template you wish to edit.
2. Press [Options] and select “Edit”.
To view the text template, press B.
To delete the text template, press [Options] and select
“Delete”.
3. Modify the text and press B.
Sending Text Templates
“Gallery” → “Text Templates”
1. Highlight the text template you wish to send.
2. Press [Options] and select “Send Template”.
Text Templates (M 6-7)
You can register up to 50 text templates for use in text
messages and multimedia messages. The maximum capacity
of the text templates is 256 characters.
Adding Phrases to Text Templates
“Gallery” → “Text Templates” → “Add New Template”
1. Enter the text and press B.
Gallery
87
Other Documents (M 6-8)
Common Option Menus
Some types of files are stored in the Other Documents folder of
the phone. You can edit and use these files as Gallery data.
For using the desired file type, first select the appropriate folder
in the Gallery menu. Gallery contains the following folders.
“Gallery” → “Pictures”
“Gallery” → “Videos”
“Gallery” → “SD Videos”
“Gallery” → “Music and Sounds”
“Gallery” → “Themes”
“Gallery” → “GSX™ & Java™”
“Gallery” → “Text Templates”
“Gallery” → “Other Documents”
Opening a Document File
“Gallery” → “Other Documents”
1. Select the desired file.
Note
• To switch between viewing handset or memory card content,
select the first item in the options menu.
Tip
• For other option menus, see “Common Option Menus”.
Activating Files with Copyright Protection (DRM)
Some pictures, sound files, video clips and theme files have a
digital copy protection program, which is called DRM (Digital
Rights Management). You need to activate the digital licence
permission to open the files. Files protected with DRM are
displayed with
.
1. Select the appropriate folder for the desired file type.
2. Highlight the file you wish to activate.
3. Press [Options] and select “Get Contents Key”.
Note
• Some pictures with DRM may not be opened even when an
attempt is made to activate it.
88
Gallery
Sending Gallery Data
For details on Bluetooth wireless technology, see
“Connectivity” on page 135.
1. Select the appropriate folder for the desired file type.
2. Highlight the desired file.
3. Press [Options] and select “Send”.
4. Select “As Message” or “Bluetooth”.
Tip
• For details on creating a message, see “Creating a New
Message” on page 66.
• For details on Bluetooth settings, see “Bluetooth” on
page 135.
Receiving Gallery Data
When the phone receives Gallery data, a confirmation message
is displayed in standby.
1. Press [Yes].
The received data is saved in the corresponding Gallery
folder.
Tip
• For details on Bluetooth wireless settings, see “Connectivity”
on page 135.
Note
• Pictures/Sounds/Video clips protected by copyright cannot
be sent attached to a message, with the exception of
Separate Delivery files.
• Theme files can only be sent via Bluetooth. Select
“Bluetooth” in step 4.
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
Gallery
89
Using Gallery Data
You can copy, move, sort, rename, and delete the saved Gallery
data.
1. Select the appropriate folder for the desired file type
(page 88).
2. Highlight the desired file.
3. Press [Options] and select “Manage Items”.
4. Select the desired option.
“Sort”:
“Rename”:
“Create Folder”:
“Change List View”:
“Delete all”:
Sorts files according to a
specific sequence.
Renames the file or folder.
Select the desired file or folder
to rename.
Creates a new folder.
Changes the list view.
Deletes all files in the folder.
Note
• “Manage Items” is not available for “GSX™ & Java™” and
“Text Templates”.
90
Gallery
To Delete the File
1. Select the appropriate folder for the desired file type
(page 88).
2. Highlight the desired file.
3. Press [Options] and select “Delete”.
To See the Gallery Details
1. Select the appropriate folder for the desired file type
(page 88).
2. Highlight the file you wish to view the details of.
3. Press [Options] and select “Details”.
Selecting Multiple Files
You can select more than one item from Gallery for moving,
copying, managing and deleting.
Note
• The following procedure applies except when the “Download
More” function is highlighted.
1. Select the appropriate folder for the desired file type
(p. 88).
2. Highlight the file you wish to select.
3. Press [Options] and select “Check”.
4. Repeat steps 2 and 3 until you select all the desired files.
Memory Status (M 6-9)
This function helps you to check the memory status of the
handset memory or memory card. Memory status covers the
following.
Handset Memory:
Applications, Pictures, Videos,
Sounds, Themes, Others, Used and
Free
Memory Card:
Pictures, Videos, Sounds, Themes,
Others, Used and Free
“Gallery” → “Memory Status”
1. Select “Handset Memory” or “Memory Card”.
Tip
• To remove the check, highlight the file again and select
“Uncheck” in step 3.
• If you wish to unselect all, select “Manage Items” in step 3
and select “Uncheck All”.
• You can quickly check, uncheck, check all or uncheck all
items by using the H, J and L keys.
H: Check/uncheck currently highlighted item
J: Checks all items in the current folder
L: Unchecks all checked items in the current folder
Gallery
91
Games & Applications (M 1)
GSX™ & Java™ Gallery (M 1-1)
The list of Java™ applications is displayed.
Downloaded applications are displayed in order starting from
the latest one.
Downloading Applications
“Games & Applications” → “GSX™ & Java™ Gallery”
→ “Download More”
1. Select the desired application.
Before downloading the application you are asked to
confirm what you are about to receive. After checking the
information on the confirmation screen, the application can
be downloaded.
2. Press B to start downloading.
3. Press B when finished.
Note
• User authentication may be required before downloading the
application on some information screens.
92
Games & Applications
Executing Applications
“Games & Applications” → “GSX™ & Java™ Gallery”
1. Select the title of the application you wish to execute.
The selected application is executed. When using network
connection type applications, connection to the network
can be selected.
2. To end the application, press F and select “End”.
Setting as a Screensaver for the Display
“Games & Applications” → “GSX™ & Java™ Gallery”
1. Highlight the file you wish to use as a screensaver.
2. Press [Options] and select “Set as Screensaver”.
Setting Permission
You can set permission for selected Java™ applications.
“Games & Applications” → “GSX™ & Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Permission”.
3. Select one of the following options:
“Phone Call”:
“Network Access”:
“Messaging”:
“Autorun”:
“Local Connection”:
“Read User Data”:
“Write User Data”:
“Use Multimedia”:
Sets permission to make voice
calls.
Sets permission to access the
network.
Sets permission to perform SMS
messaging.
Sets permission to perform the
Autorun function.
Sets permission to connect to local
devices.
Sets permission to read user data,
such as Phonebook entries,
mailbox (Inbox) and Gallery data.
Sets permission to write entries in
your phone, such as Phonebook
entries, mailbox (Inbox) and
Gallery data.
Sets permission to use the
multimedia recording.
4. Select one of the following options:
“Session”:
“Ask Once”:
“Blanket”:
“No”:
The confirmation message is not
displayed until you exit the
application, while execution of
network access is authorised.
The confirmation message is
displayed every time network
access is executed.
The confirmation message is not
displayed until the application is
deleted or you change the
settings, while execution of
network access is authorised.
Execution of network access is not
authorised.
Note
• To clear all the permission settings, select “Reset” in step 3.
• Some permissions are not available for some Java™
applications.
• “Read User Data” and “Write User Data” may not be
available in step 3.
Games & Applications
93
Viewing Application Information
You can check the information of Java™ applications.
“Games & Applications” → “GSX™ & Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Information”.
Deleting an Application
You can delete an application in the folder.
“Games & Applications” → “GSX™ & Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Delete”.
94
Games & Applications
Java™ Settings (M 1-2)
Application Volume
You can set the volume of the application such as the sound
effect to one of the five levels or silent. When the profile is set
to “Silent”, the “General Volume” setting (p. 110) has priority.
“Games & Applications” → “Java™ Settings” →
“Application Volume”
1. Press a (or d) to increase the volume or press b (or
c) to decrease the volume and then press B.
Backlight
“Games & Applications” → “Java™ Settings” →
“Backlight” → “Switch On/Off”
1. Select from “Always On”, “Always Off” or “Normal
Settings”.
“Always On”:
Lit while the application is
operated.
“Always Off”:
Unlit while the application is
operated even if a key is pressed.
“Normal Settings”:
Works with the main backlight
setting (p. 117).
To Set the Blinking Operation
This setting enables the backlight to be controlled by the
application. If set to “Off”, the backlight cannot be turned on
from the application.
“Games & Applications” → “Java™ Settings” →
“Backlight” → “Blink”
1. Select “On” or “Off”.
Vibration
When the vibrator is set in the application, you can choose
whether the operation is enabled or disabled.
“Games & Applications” → “Java™ Settings” →
“Vibration”
1. Select “On” or “Off”.
Calls & Alarms
You can set the priority of incoming calls and alarms while an
application is operating.
“Games & Applications” → “Java™ Settings” → “Calls
& Alarms”
1. Select “Voice Call”, “Video Calling”, “Incoming
Message” or “Alarm”.
2. Select the desired method.
• “Call Priority”, “Message Priority” or “Alarm Priority”:
The application is suspended automatically, and you
can receive a call or a message, or the alarm will sound.
After finishing the call or sending the message, or when
the alarm ends, the suspend indicator ( ) is displayed
letting you know there is a suspended application.
• “Call Notice”, “Message Notice” or “Alarm Notice”:
The marquee (character scrolls) is displayed on the first
line of the screen while the application continues. If you
press D, the application is suspended, and you can
receive a call. After finishing the call or sending the
message, the suspend indicator ( ) is displayed letting
you know there is a suspended application.
Games & Applications
95
Set Java™ Wallpaper
You can set Java™ Wallpaper for the standby screen.
To Switch the Java™ Wallpaper On or Off
“Games & Applications” → “Java™ Settings” → “Set
Java™ Wallpaper” → “Switch On/Off”
1. Select “On” or “Off”.
To Set the Activation Time
“Games & Applications” → “Java™ Settings” → “Set
Java™ Wallpaper” → “Activation Time”
1. Enter the activation time in two digits using the keypad.
To Set the Suspend Time
“Games & Applications” → “Java™ Settings” → “Set
Java™ Wallpaper” → “Suspend Time”
1. Set the desired time period from “after 15 min.” to “after
6 hours”.
96
Games & Applications
Default Settings
“Games & Applications” → “Java™ Settings” → “Set
to Default”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 129.
Clearing All Memory
“Games & Applications” → “Java™ Settings” →
“Memory All Clear”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 129.
Java™ Information (M 1-3)
“Games & Applications” → “Java™ Information”
The information about the licences belonging to Java™ is
displayed.
Organiser (M 3)
Calendar (M 3-1)
The calendar allows you to easily schedule appointments.
These entries can also be sent via Bluetooth wireless
technology to a PC to share the same schedules. When you
exchange entries with other devices, the date and time
displayed may be different to that of the original data
depending on the data format of the receiving device.
Creating a New Entry
“Organiser” → “Organiser” tab → “Calendar”
1. Select the desired day to which you want to add an
event.
2. Select “Add New Entry”.
Note
• If the date and time settings have not been entered, the date
and time entry screen is displayed (p. 119).
• The reminder will not sound when “General Volume” (p. 110)
is set to “Silent”.
• Quick Entry is available if you press N in the Calendar
screen. Select the desired category and press [Select].
To Change the Settings
1. Select the item you wish to change in the New Entry
screen.
• “Reminder”:
• “Repeat”:
3. Enter the subject.
4. Enter the start date and time.
5. Select the reminder time.
• “Location”:
When selecting “Other”, enter the desired reminder date
and time.
6. Select the desired category.
• “Secret”:
7. Press [Save].
• “Description”:
Sets options including “Reminder
Time”, “Assign Tone/Video” and
“Duration” for the reminder.
Sets the number of times the
reminder sounds.
Sets the location for the schedule
entry.
Enables entering a memo for the
schedule entry.
Sets to show or hide the schedule
entry. Set to “On” to make the data
secret or select “Off” to leave it as it
is.
Organiser
97
Viewing a Schedule Entry
“Organiser”→ “Organiser” tab → “Calendar”
1. Select the day you wish to view.
2. Select the desired entry.
To Search by Date
1. In any view, press [Options] and select “Go to”.
2. Select “Today” to display today or “Enter Date” to enter
the desired date.
Tip
• In the monthly, 2-month or weekly view, you can control the
view by using the following:
Monthly or 2-month view
P:
Displays the previous month.
R:
Displays the next month.
Q:
Switches the view.
K:
Moves the cursor to today.
c/ d :
Moves the cursor to left (the previous day) or to
right (the next day).
a/ b :
Moves the cursor upward (last week) or
downward (next week).
98
Organiser
Weekly view
P:
Displays the previous week.
R:
Displays the next week.
Q:
Switches the view.
K:
Moves the cursor to today.
c/ d :
Moves the cursor to left (the previous day) or to
right (the next day).
a/ b :
Moves the weekly view up or down (the previous
hour or next hour).
Setting a Holiday
In the weekly or monthly view, you can highlight a date or days
of the week with seven colour options.
“Organiser”→ “Organiser” tab → “Calendar”
For Date Colour
1. Highlight the day you wish to set.
2. Press [Options] and select “Set Holiday”.
3. Select “By Date” and then select the desired colour.
For Days of the Week Colour Setting
1. Press [Options] and select “Set Holiday”.
2. Select “By Week” and then select days of the week you
wish to colour.
3. Select the desired colour.
Tip
• The selected date/days are also highlighted on the calendar
on the standby screen.
Note
• If the same date is set with both a date colour and
a day of the week colour, the date is highlighted in the date
colour.
• Up to 100 days can be set for the highlights.
Finding a Schedule Entry
“Organiser”→ “Organiser” tab → “Calendar”
1. In any view, press [Options] and select “Find”.
2. Enter a few letters of the subject.
Search results are displayed in time order.
Editing a Schedule Entry
“Organiser”→ “Organiser” tab → “Calendar”
1. Select the day you wish to edit.
2. Highlight the entry you wish to edit, press [Options], then
select “Add New Entry”.
3. Select the desired item and modify the entry.
4. Press [Save].
Deleting Schedule Entries
1. In any view, press [Options] and select “Delete”.
2. Select the desired option.
“This Appointment” (daily view):
Deletes the selected entry.
“All This Day” (weekly, monthly and 2-month view):
Deletes all entries for the selected
day.
“All This Month” (monthly view):
Deletes all entries for the selected
month.
“Last two months” (2-month view):
Deletes all entries for the selected
two months.
“Up to Last Month” (monthly view):
Deletes all entries before the selected
month.
“All Appointments” (monthly and 2-month view):
Deletes all entries in this application.
Organiser
99
Sending a Schedule Entry
“Organiser”→ “Organiser” tab → “Calendar”
1. Select the day including schedule entries you wish to
send.
2. Highlight the entry you wish to send, press [Options],
then select “Send”.
3. Select “As Message” or “Via Bluetooth”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 135.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
Receiving a Schedule Entry
When the phone receives a schedule entry, a confirmation
message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Calendar.
Press [No] to reject.
Tip
• For details on entering Bluetooth wireless settings, see
“Connectivity” on page 135.
100 Organiser
Viewing the Memory Status
1. In any view, press [Options] and select “Memory
Status”.
Alarms (M 3-2)
Setting the Alarms
The alarm function allows you to be alerted at a specified time.
Note that you need to set the current date and time before
setting the alarm function if it has not been done already.
“Organiser”→ “Organiser” tab → “Alarms”
1. Select the blank line (--:--) you wish to set an alarm to.
2. Enter the desired time.
3. Press [Save].
To Change the Settings
1. Select the item you wish to change in the Set Alarm
screen.
• “Repeat”:
Sets the number of times the alarm sounds.
• “Assign Tone/Video”:
Assigns a tone or video clip file to the alarm.
• “Snooze”:
Sets the snooze option.
• “Alarm Volume”:
Sets the desired volume.
The alarm will not sound when “Alarm Volume” is set to
“Silent”. When the profile is set to “Silent”, the “General
Volume” setting (p. 110) has priority.
• “Vibration”:
Sets the vibration pattern of the alarm.
For details on selecting a vibration, see “Vibration” on
page 114.
• “Duration”:
Sets the duration of the alarm.
Resetting an Alarm
“Organiser”→ “Organiser” tab → “Alarms”
1. Highlight the alarm you wish to reset.
2. Press [Options] and select “Reset Alarm”.
Resetting All Alarms
“Organiser”→ “Organiser” tab → “Alarms”
1. Select “Clear All”.
Organiser 101
Stopwatch (M 3-3)
Tasks (M 3-4)
You can store 4 lap times when using the stopwatch function.
“Organiser”→ “Organiser” tab → “Stopwatch”
1. Press B to start.
Press [LAP] to view the lap time before the stopwatch
stops. Last 4 lap times are saved.
2. Press B to stop.
You can save your schedule as task entries for a given date or
time.
Tip
• You can save a record of lap times and the stop time by
pressing [Options] and selecting “Save to Templates”.
3. Enter the due date and time.
4. Press [Save].
Resetting Time
1. After stopping the stopwatch, press [Options] and select
“Reset”.
Creating a New Entry
“Organiser”→ “Organiser” tab → “Tasks”
1. Select “Add New Entry”.
2. Enter the subject.
Note
• If the date and time settings have not been entered, the date
and time entry screen is displayed (p. 119).
To Select the Reminder Time
1. On the New Entry screen, select “Reminder”.
2. Select “Reminder Time”.
3. Select the reminder time.
When selecting “Other”, enter the desired reminder date
and time.
102 Organiser
To Change the Type of Alarm Tone or Video Clip File
1. On the New Entry screen, select “Reminder”.
2. Select “Assign Tone/Video”.
3. Select “Select sound” and then select “Preset Sounds”
or “Music and Sounds”, or select “Select Video”.
4. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a Ringtone
for an Incoming Call” on page 111.
To Change the Duration of Alarm Tone or Video
1. On the New Entry screen, select “Reminder”.
2. Select “Duration”.
To Mark the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to mark the data secret or select “Off” to
leave it as it is.
Marking the Entry as Completed or Uncompleted
“Organiser”→ “Organiser” tab → “Tasks”
1. Highlight the desired entry.
2. Press B.
3. On the view screen, press [Options] and select “Check”.
To make the entry incomplete, select “Uncheck”.
3. Select the desired duration.
To Change the Description
1. On the New Entry screen, select “Description”.
2. Enter a memo for the task entry.
Organiser 103
Finding a Task Entry
“Organiser”→ “Organiser” tab → “Tasks”
1. Press [Options] and select “Find”.
2. Enter a few letters of the subject and press B.
Search results are displayed in time order.
Sending a Task Entry
“Organiser”→ “Organiser” tab → “Tasks”
1. Highlight the task entry you wish to send.
2. Press [Options] and select “Send”.
3. Select “As Message” or “Via Bluetooth”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 135.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
104 Organiser
Viewing the Memory Status
“Organiser”→ “Organiser” tab → “Tasks”
1. Press [Options] and select “Memory Status”.
Deleting Entries
“Organiser”→ “Organiser” tab → “Tasks” → [Options]
→ “Delete”
1. Select the desired option.
“This Task”:
Deletes the selected entry.
“All Completed Tasks”: Deletes all marked as
“Completed” entries.
“All Tasks”:
Deletes all entries.
World Clock (M 3-5)
Countdown Timer (M 3-6)
Setting the Time Zone
“Organiser”→ “Organiser” tab → “World Clock”
1. Press [Edit] and select “Set Time Zone”.
The current time zone is indicated by red line on the world
map.
2. Press c or d to change the time zone.
“Organiser”→ “Organiser” tab → “Countdown Timer”
1. Enter the time to count.
You can set the time from 1 second to 60 minutes.
2. Press B to start counting.
3. Press B.
4. If the countdown has finished, press [Cancel] and then
To Set the Custom Time Zone
“Organiser”→ “Organiser” tab → “World Clock”
1. Press [Edit] and select “Set Time Zone”.
2. Press [Options] and select “Set Custom Zone”.
3. Enter the desired city name and time.
3. Press B to pause.
Press B again to continue counting.
press B to start the countdown again.
Editing the Countdown Time
1. In the countdown start screen, press [Options] and
select “Edit”.
2. Modify the desired time.
Setting Daylight Saving
“Organiser”→ “Organiser” tab → “World Clock”
1. Press [Edit] and select “Daylight Saving”.
2. Select “On” or “Off”.
Organiser 105
Calculator (M 3-d-1)
The calculator function performs the 4 arithmetic calculations
using up to 12 digits.
“Organiser”→ “Utilities” tab → “Calculator”
Rate Conversion
You can also use the calculator as a currency calculator to
convert from/to a home currency using a conversion rate that
you enter.
To Set a Currency Conversion Rate
“Organiser”→ “Utilities” tab → “Calculator” →
[Options] → “Currency Converter” → “Exchange Rate”
1. Select “Domestic” or “Foreign”.
2. Enter the currency conversion rate.
To Convert a Value
“Organiser”→ “Utilities” tab → “Calculator”
1. Enter the value to be converted.
2. Press [Options] and select “Currency Converter”.
Key operations for calculation are as follows:
To enter a decimal point, press P.
To clear the entered number or function, press [Clear].
To do the calculations, press B.
To start a new calculation, press [Clear].
106 Organiser
3. Select “Convert to Domestic” or “Convert to Foreign”.
Voice Recorder (M 3-d-2)
Selecting the Record Time
S → [Options] → “Record Time”
1. Select “For Message” or “Extended Voice”.
When selecting “Extended Voice”, voice clips are
automatically saved in the memory card.
Recording a Voice Clip
S
1. Press B to start recording.
To stop recording before the recording time is over, press
B.
2. Select “Save” to save the voice clip.
Selecting Storage Memory
S → [Options] → “Save Recording to”
1. Select the desired location.
When selecting “Choice”, you can select the location when
saving a voice clip.
This allows you to record a voice clip, which can be used to
remind you of schedule entries or be sent within a multimedia
message. The recorded voice clip is saved in Music and
Sounds. Voice clips are saved in .amr format.
Note
• Press a (or V) or b (or W) to adjust the sound volume
when playing back the recorded file.
Sending Voice Clips
S
1. Press B to start recording.
To stop recording before the recording time is over, press
B.
2. Select “Save and Send”.
Organiser 107
Expenses Memo (M 3-d-3)
You can record an expenses memo with pre-defined or edited
categories.
Recording in the Expenses Memo (M 3-d-3-1)
“Organiser”→ “Utilities” tab → “Expenses Memo” →
“Add New Expense”
1. Enter the expenses using the digit keys.
2. Select the desired category.
Expenses memo is registered.
Viewing Totals (M 3-d-3-2)
“Organiser”→ “Utilities” tab → “Expenses Memo” →
“Totals”
Recorded expenses are displayed on the screen.
To Change Category
1. In the total view, highlight the desired item.
2. Press [Options] and select “Change Category”.
3. Select the desired category.
108 Organiser
To Change Amount
1. In the total view, highlight the desired item.
2. Press [Options] and select “Change Amount”.
3. Enter the desired amount using the digit keys.
To Delete a Recorded Item or All Items
1. In the total view, highlight the desired item.
2. Press [Options] and select “Delete Item” or “Delete All”.
Editing the Category Name (M 3-d-3-3)
“Organiser”→ “Utilities” tab → “Expenses Memo” →
“Edit Category”
1. Select the desired category name.
2. Modify the name.
Phone Help (M 3-d-4)
You can view the help list and use it to guide you in the phone’s
functions.
“Organiser”→ “Utilities” tab → “Phone Help”
1. Press a or b.
SIM Application (M 10)
You can refer to the information on the SIM/USIM card. Contact
your service provider for further details.
SIM Application
109
Settings (M 9)
Profiles
The ringtone, sound, vibration and light settings can be
customised for each profile according to your environment.
There are 6 profiles: “Normal”, “Meeting”, “Activity”, “Car”,
“Headset” and “Silent”.
Activating a Profile
“Settings” → “Profiles” tab
1. Select the desired profile.
Note
• When a profile is set, the corresponding indicator described
on page 19 is displayed in standby.
Tip
• In standby, long press R to switch Profiles between Silent
mode and the profile most recently activated.
Resetting Profile Settings
“Settings” → “Profiles” tab
1. Highlight the profile you wish to reset.
2. Press [Options] and select “Set to Default”.
3. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 129.
Volume
You can adjust the volume for incoming voice calls, SMS/MMS/
Email messages and other sounds (“General Volume”) to one
of six levels.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Volume”.
4. Select “For Incoming Call”, “For New Message” or
“General Volume”.
110 Settings
5. Press a (or d) to increase the ringer volume or press
b (or c) to decrease the ringer volume and then press
B.
To select “Silent”, press b (or c) at level 1.
Tip
• You can select from two levels or an increasing volume,
when selecting the “Silent” profile.
Assigning a Ringtone for an Incoming Call
You can set a ringtone for incoming voice calls and video
callings. You can select from different tones including patterns,
sound effects and melodies or set a sound in Saved Sounds as
the default ringtone.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3.
4.
5.
6.
7. Highlight the ringtone you wish to use.
To hear the demo play, press [Options] and select “Play”.
8. Press [Options] and select “Assign” for “Preset Sounds”.
Note
• Even if you delete a sound that is being used as a ringtone,
the setting remains the same and the default ringtone
sounds.
• Melodies can be selected from “Music and Sounds” and
“Preset Sounds”.
Select “Ringtone/Ringvideos”.
Select “For Voice Call” or “For Video Calling”.
Select “Assign Tone”.
Select “Preset Sounds” or “Music and Sounds”.
Settings 111
Assigning a Ring Video Clip for an Incoming Call
You can set a ring video clip for incoming voice calls and video
callings. You can set a video clip in Saved Videos as the default
ring video clip.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3.
4.
5.
6.
Select “Ringtone/Ringvideos”.
Select “For Voice Call” or “For Video Calling”.
Select “Assign Video”.
Highlight the ring video clip file you wish to use.
To preview the file, press [Options] and select “Play”.
7. Press B.
Message Notification
When receiving messages, your phone will notify you of their
arrival with the ringtone or ring video clip you specify.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Ringtone/Ringvideos”.
4. Select “For New Message”.
112 Settings
5. Select “Assign Tone” or “Assign Video”.
If “Assign Tone” is selected, select “Preset Sounds” or
“Music and Sounds”.
6. Highlight the desired ringtone or ring video clip.
For details on selecting a ringtone or a ring video clip, see
“Assigning a Ringtone for an Incoming Call” on page 111
or “Assigning a Ring Video Clip for an Incoming Call”.
7. Press [Options] and select “Assign” for “Preset Sounds”.
8. Select “For New Message” and select “Duration”.
9. Enter the desired duration of message notification in 2
digits using the digit keys.
Keypad Tones
When the keypad tone is set on, you will hear a confirmation
tone each time you press any key.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “System Sounds”.
4. Select “Keypad Tones”.
5. Highlight the desired tone pattern.
6. Press [Options] and select “Assign”.
Warning Tone
Your phone can be set to emit a warning tone when an error
occurs.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
Power On/Off Sound
Your phone can be set to emit a sound when it is switched on
or off.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “System Sounds”.
4. Select “Power On Sound” or “Power Off Sound”.
5. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “Music and
Sounds”.
For “Duration”, enter the desired duration of sound in 2
digits using the digit keys.
3. Select “System Sounds”.
4. Select “Warning Tone”.
5. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “Music and
Sounds”.
For “Duration”, select the desired time between 0.5 and 2
seconds.
Settings 113
Vibration
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Vibration”.
4. Select “For Incoming Call” or “For New Message”.
5. Select “Switch On/Off” and then select “On” to activate.
If you wish to change the vibration pattern, select “Vibration
Pattern” and then select the desired option.
Tip
• When you select “On” in step 5, “ ” is displayed in
standby.
Event Light
You can set the Small Light to flash when receiving an incoming
call or a new message.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Event Light”.
114 Settings
4. Select the desired option.
“For Voice Call”:
“For Video Calling”:
“For New Message”:
Flashes when an incoming voice
call is received.
Flashes when an incoming video
calling is received.
Flashes when a new message is
received.
Status Light
You can set the Small Light to flash when you miss any
incoming calls or new messages.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Status Light”.
4. Select the desired option.
“For Missed Call”:
“For New Message”:
Flashes when an incoming voice
call is missed.
Flashes when a new message is
missed.
Any Key Answer
You can answer a call by pressing any key except F or [Busy].
For details, see page 22.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Any Key Answer”.
4. Select “On” or “Off”.
2. Select the desired picture.
3. After displaying the picture, press B.
Note
• Some pictures cannot be used because of their picture and
data types.
• Wallpaper can be linked to a theme. Select “Link to Theme”
in step 1.
Phone Settings
Setting the Display (M 9-d-1)
You can change the display settings.
Setting the Wallpaper (M 9-d-1-1)
Your phone includes preset pictures to be used as wallpaper in
standby. Pictures taken with the phone’s digital camera or
images downloaded from a WAP site can also be used as
wallpaper.
“Settings” → “Phone Settings” tab → “Display
Settings” → “Wallpaper”
1. Select the folder in which the picture you wish to set is
contained.
Pictures can be selected from “Preset Pictures”, “Pictures”
or “Other Documents”.
Settings 115
Themes (M 9-d-1-2)
You can easily customise the display by using the theme files.
The theme files downloaded from a WAP site can be used.
“Settings” → “Phone Settings” tab → “Display
Settings” → “Themes”
1. Select “Preset Themes” or “My Themes”.
2. Select the desired theme file.
Tip
• Even after a theme is set, you can set a wallpaper regardless
of the set theme. In this case, the other items follow the set
theme.
Assigning Pictures (M 9-d-1-3)
Pictures can be displayed when turning the power on or off,
when receiving an incoming call, or when operating the alarm.
Pictures taken with the phone’s digital camera or images
downloaded from a WAP site can be used.
To Set Built-in Pictures
“Settings” → “Phone Settings” tab → “Display
Settings” → “Assign Pictures”
1. Select the desired function to set the picture to.
2. Select “Default” when you select “Power On” or select
“Power Off” in step 1.
Select “Pattern 1”, “Pattern 2” or “Pattern 3” when you
select “Incoming” or “Incoming Video Calling” in step 1.
116 Settings
To Set Saved Pictures
“Settings” → “Phone Settings” tab → “Display
Settings” → “Assign Pictures”
1. Select the desired function to set the picture to.
2. Select “Pictures”.
3. Select the desired picture.
4. After displaying the picture, press B.
5. Specify the area you wish to display using the navigation
keys, then press B.
Note
• Some pictures cannot be used because of their picture and
data types.
Setting the Standby Display (M 9-d-1-4)
You can set the standby screen display.
“Settings” → “Phone Settings” tab → “Display
Settings” → “Standby Display”
1. Select “Clock/Calendar”, “Display icons” or “Show
Operator Name”.
Setting the Greeting Message (M 9-d-1-5)
You can set the message which is displayed when the phone is
turned on.
“Settings” → “Phone Settings” tab → “Display
Settings” → “Greeting Message”
1. Select “Switch On/Off” and then select “On” or “Off”.
To Select the Backlight Time Out
“Settings” → “Phone Settings” tab → “Display
Settings” → “Backlight” → “Time Out”
1. Select the desired time.
Select “Off” to shut it off.
To Adjust the Brightness of the Backlight
“Settings” → “Phone Settings” tab → “Display
Settings” → “Backlight” → “Brightness”
1. Press a (Light) and b (Dark) to switch between 4
levels of clarity.
2. Press B.
Tip
• If you wish to edit the message, select “Edit Message” in
step 1 and enter a message (up to 10 characters).
Backlight (M 9-d-1-6)
The backlight will shut off if you do not press the keypad for a
certain length of time. You can specify a desired time to elapse
before the backlight shuts off, which will help conserve battery
life.
Tip
• When you purchase this phone, Backlight is set to 15
seconds.
Settings 117
Setting the Display Saving (M 9-d-1-7)
The screen of this phone will automatically turn off after a given
amount of time. You can change the length of time before the
Display Saving goes into effect, which will help conserve
battery life.
“Settings” → “Phone Settings” tab → “Display
Settings” → “Display Saving”
1. Select the desired time.
When you purchase this phone, Display Saving is set to 2
minutes.
Note
• Display Saving does not work while you are using WAP or an
application.
• To cancel the Display Saving: The display saving continues
until either a key is pressed or there is an incoming alert. The
first key press only cancels this function. You must press
another key in order to enter any numerical or text value.
Sound Settings (M 9-d-2)
You can use this menu to check or edit the current profile
settings (except “Any Key Answer”).
“Settings” → “Phone Settings” tab → “Sound
Settings”
118 Settings
Slider Settings (M 9-d-3)
You can set the action when sliding open or sliding close your
phone.
“Settings” → “Phone Settings” tab → “Slider Settings”
To Set the Open Action for Calling
1. Select “Calls on Open” and select the desired option.
“Accept Call”:
“No Action”:
Enables answering an incoming
call by sliding open the phone.
Disables answering an incoming
call by sliding open the phone.
To Set the Close Action for Calling
1. Select “Calls on Close” and select the desired option.
“End Call”:
“No Action”:
Enables terminating a call by
sliding close the phone.
Disables terminating a call by
sliding close the phone.
To Set the Close Action for Locking
1. Select “Lock on Close”.
2. Select the desired time to elapse before the phone locks
after sliding it close.
If you select “No Action”, sliding close the phone will not
lock it.
Date & Time (M 9-d-4)
You need to set the correct time and date in order for your
phone’s various time-based functions to work correctly.
“Settings” → “Phone Settings” tab → “Date & Time” →
“Set Date/Time”
1. Enter the day, month, year and time using the digit keys.
Tip
• When you enter the time in the 12-hour format, press a or
b to switch between am and pm. The order in which the
date and time is displayed is based on the format setting.
To Set the Time Zone (M 9-d-4-3)
“Settings” → “Phone Settings” tab → “Date & Time” →
“Set Time Zone”
1. Press c or d to select the home city to set.
2. Press B.
To Customise the Time Zone
“Settings” → “Phone Settings” tab → “Date & Time” →
“Set Time Zone” → [Options] → “Set Custom Zone”
1. Enter the city name.
2. Enter the time-zone differences using the digit keys.
Press a or b to switch between − and +.
3. Press B.
To Set Daylight Saving (M 9-d-4-2)
“Settings” → “Phone Settings” tab → “Date & Time” →
“Daylight Saving”
1. Select “On” or “Off”.
Settings 119
World Clock (M 9-d-4-4)
For details, see page 105.
To Select the Time Format (M 9-d-4-5)
“Settings” → “Phone Settings” tab → “Date & Time” →
“Time Format”
1. Select “24 Hour” or “12 Hour”.
To Select the Date Format (M 9-d-4-6)
“Settings” → “Phone Settings” tab → “Date & Time” →
“Date Format”
1. Select from “D-M-Y”, “M-D-Y” or “Y-M-D”.
Shortcuts (M 9-d-6)
You can change the default shortcut action/assignment of the
a, b, c, d, A and C soft keys with the Shortcuts menu.
The menu shows the current assignment of each of the above
keys.
“Settings” → “Phone Settings” tab → “Shortcuts”
1. Highlight the key you wish to change.
2. Press [Assign].
3. Press a and b to scroll by item.
4. Press [Options] and select “Assign” to update the key for
the highlighted item.
Language Setting (M 9-d-5)
You can change the language displayed on the phone.
“Settings” → “Phone Settings” tab → “Language”
1. Select the desired language.
Note
• If you are outside of your network area, the network-related
items are not available.
Tip
• You can also change the input language on the text entry
screen (p. 31).
Tip
• You can clear the settings by selecting “Set to Default” in
step 1.
Note
• If you select “Automatic” in step 1, the language preset on
the SIM/USIM card is selected.
• If the language preset on the SIM/USIM card is not
supported, then the default language of the phone is
selected.
120 Settings
Master Reset (M 9-d-9)
You can return the settings for M1 to M12 to the default
settings.
“Settings” → “Phone Settings” tab → “Master Reset”
→ “Reset Settings”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 129.
Note
• Some settings are not deleted by this function. Data stored
in Phonebook, etc. is not deleted.
Other Settings
Call Settings (M 9-d-d-1)
Voicemail & Diverts (M 9-d-d-1-1)
This service can be used to divert incoming calls that you
cannot answer. Calls can be diverted to another phone number
or to your Voicemail system.
Note
• This service may not be available on all mobile phone
networks. Contact your service provider for more
information.
To Reset All Settings for M1 to M12 and Delete All Created
Data (M 9-d-9-2)
“Settings” → “Phone Settings” tab → “Master Reset”
→ “Reset All”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 129.
Settings 121
To Access the Voicemail Centre
1. Long press G in standby.
To Activate the Voicemail Service
“Settings” → “Other Settings” tab → “Call Settings” →
“Voicemail & Diverts” → “Voicemail” → “Activate”
1. Select one of the following options:
“Always”:
Diverts all calls without ringing.
“When Busy”:
Diverts incoming calls while you
are talking on the phone.
“No Answer”:
Diverts incoming calls if you do not
answer a call within a certain
period of time.
“Not Reachable”:
Diverts incoming calls when your
phone has no network service or is
switched off.
If you select “No Answer”, select the period of time from 6
levels (05 to 30 seconds).
2. Press B.
122 Settings
To Activate the Diverts Service
Select the appropriate option.
“Settings” → “Other Settings” tab → “Call Settings” →
“Voicemail & Diverts” → “Diverts”
1. Select “Activate” or “By Service”.
If you select “By Service”, you can select further divert
options.
2. Select from “Always”, “When Busy”, “No Answer” or
“Not Reachable”.
If you select “No Answer”, select the period of time from 6
levels (05 to 30 seconds).
3. Enter a phone number to which you wish to divert calls
or search for it in the Phonebook (p. 42).
4. Press B.
Note
• When “Voice Calls” diverts are set to “Always”, “
displayed in standby.
” is
To Check the Diverts Status
“Settings” → “Other Settings” tab → “Call Settings” →
“Voicemail & Diverts” → “Status”
1. Select the diverts option you wish to check.
To Cancel the Diverts and Voicemail Service
Once you have changed the diverts settings, you can cancel
them all with this service.
“Settings” → “Other Settings” tab → “Call Settings” →
“Voicemail & Diverts” → “Cancel All”
Showing Your Number (M 9-d-d-1-3)
This lets you control whether to show your phone number when
calling another party or not.
“Settings” → “Other Settings” tab → “Call Settings” →
“Show Your Number”
1. Select “On”, “Off” or “Status”.
Note
• Some networks do not support this service. Please check
with your service provider for availability.
Call Waiting (M 9-d-d-1-2)
Note
• This service may not be available on all mobile phone
networks. Contact your service provider for more
information.
If you wish to be able to receive another incoming call while you
have a call in progress, you must activate the Call Waiting
service.
“Settings” → “Other Settings” tab → “Call Settings” →
“Call Waiting”
1. Select “On”, “Off” or “Status”.
Settings 123
Restrict Calls (M 9-d-d-1-4)
This function lets you place restrictions on incoming and
outgoing calls. To activate this option you will need the
specified password, which is available from your service
provider.
“Settings” → “Other Settings” tab → “Call Settings” →
“Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
“Outgoing Calls”:
Restricts outgoing calls.
“Incoming Calls”:
Restricts incoming calls.
2. Select one of the following options:
(For “Outgoing Calls”)
“Bar All Outgoing Calls”: Restricts all outgoing calls
except emergency calls.
“Bar International Calls”: Restricts all outgoing
international calls.
“Only Local & Home”:
Restricts all outgoing
international calls except to your
home country.
(For “Incoming Calls”)
“Bar All Incoming Calls”: Restricts all incoming calls.
“Bar if Abroad”:
Restricts all incoming calls when
you are outside of the coverage
from your registered service
provider.
124 Settings
3. Select one of the following options:
“All Services”:
Restricts all services.
“Voice Calls”:
Restricts all voice calls.
“Video Callings”:
Restricts all video callings.
“Fax”:
Restricts all fax calls.
“Messages”:
Restricts all messages.
4. Select “On”, “Off” or “Status”.
5. Enter the network password.
To Cancel Settings
“Settings” → “Other Settings” tab → “Call Settings” →
“Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
2. Select “Cancel All”.
3. Enter the network password.
Rejecting an Incoming Call
You can register phone numbers you do not wish to answer.
To Reject the Registered Number
“Settings” → “Other Settings” tab → “Call Settings” →
“Restrict Calls” → “Rejected Numbers” → “Switch On/
Off”
1. Select “On” or “Off”.
To Register the Rejected Number
“Settings” → “Other Settings” tab → “Call Settings” →
“Restrict Calls” → “Rejected Numbers” → “Set
Rejecting Number”
1. Select a blank field.
2. Enter the desired number.
Rejecting a Call when the Caller’s Number is Withheld
“Settings” → “Other Settings” tab → “Call Settings” →
“Restrict Calls” → “Withheld Call”
1. Select “On” or “Off”.
Changing the Network Password
“Settings” → “Other Settings” tab → “Call Settings” →
“Restrict Calls” → “Change N/W Password”
1. Enter the old network password.
2. Enter a new network password.
3. Enter the new network password again.
If you enter the incorrect password, you are asked to enter
the password again.
4. Press B.
Minute Minder (M 9-d-d-1-5)
Minute Minder function informs you of your talk time by
sounding a tone after every minute.
“Settings” → “Other Settings” tab → “Call Settings” →
“Minute Minder”
1. Select “On” or “Off”.
Display Call Timer (M 9-d-d-1-6)
“Settings” → “Other Settings” tab → “Call Settings” →
“Display Call Timer”
1. Select “On” or “Off”.
Settings 125
Display Call Cost (M 9-d-d-1-7)
“Settings” → “Other Settings” tab → “Call Settings” →
“Display Call Cost”
1. Select “On” or “Off”.
Auto Redial (M 9-d-d-1-8)
“Settings” → “Other Settings” tab → “Call Settings” →
“Auto Redial”
1. Select “On” or “Off”.
Video Calling Settings (M 9-d-d-2)
Set various types of functions and services for video callings.
To Select an Image for the Alternative Image
You can select an image shown to the other party between the
sub camera image and an alternative image from the saved
picture files.
“Settings” → “Other Settings” tab → “Video Calling
Settings” → “Camera Picture”
1. Select “Default Image” or “Alternative Image”.
For “Default Image”, select “Internal Camera”, “External
Camera” or “Alternative Image”.
For “Alternative Image”, select “Preset Picture” or
“Pictures”.
126 Settings
To Turn On or Off the Speaker
“Settings” → “Other Settings” tab → “Video Calling
Settings” → “Loudspeaker”
1. Select “On” to turn on the loudspeaker or select “Off” to
turn it off.
To Select the Picture Quality
Select the desired data format for your environment.
“Settings” → “Other Settings” tab → “Video Calling
Settings” → “Incoming Picture Quality”
“Settings” → “Other Settings” tab → “Video Calling
Settings” → “Outgoing Picture Quality”
1. Select “Normal”, “Quality Priority” or “Frame Rate
Priority”.
Select “Frame Rate Priority” to perform faster
communication.
To Set the Backlight
With this setting on, the phone’s backlight is on when making
a video calling.
“Settings” → “Other Settings” tab → “Video Calling
Settings” → “Backlight”
1. Select “Always On”, “Always Off” or “As Normal
Setting”.
The “As Normal Setting” option depends on the backlight
setting of the display (p. 117).
To Mute the Microphone
You can mute the microphone while making a video calling.
“Settings” → “Other Settings” tab → “Video Calling
Settings” → “Mute Microphone”
1. Select “On” to mute or “Off” to cancel mute.
To Assign Hold Guidance Picture
You can display an image saved in the phone on your display
while you are putting a call on hold.
“Settings” → “Other Settings” tab → “Video Calling
Settings” → “Hold Guidance Picture”
1. Select “Preset Picture” or “Pictures”.
2. Select the desired picture.
Security Settings (M 9-d-d-3)
You can set various locks on your phone such as PIN Entry and
Handset Lock.
“Settings” → “Other Settings” tab → “Security
Settings” → “Security Settings”
Enabling/Disabling the PIN Code
If the PIN code is enabled, you are asked to enter the PIN code
each time the phone is switched on. Your PIN code is registered
on the SIM/USIM card and you should have been made aware
of the code when you purchased the SIM/USIM card. Contact
your service provider for further details.
Select “On” for “PIN Entry” and enter your PIN code if you wish
to activate the PIN lock.
Note
• If you enter the wrong PIN code three times, the SIM/USIM
card will lock. To remove the lock, contact your service
provider or SIM/USIM card vendor.
Settings 127
To Change the PIN Code
This allows you to change the PIN code registered on the SIM/
USIM card. Before you change the PIN code, select “On” for
“PIN Entry”.
Enter the existing PIN code for “Change PIN” after selecting
“PIN Entry”, and enter a new PIN code twice.
To Change the PIN2 Code
PIN2 is a second PIN code used to unlock certain features of a
SIM/USIM card, such as Fixed Dialling and Call Cost metering.
Not all SIM/USIM cards use the PIN2 code. This menu may not
be displayed depending on the type of your SIM/USIM card.
Enter the existing PIN2 code for “Change PIN2”, and enter a
new PIN2 code twice.
Handset Lock
The Handset Lock prevents unauthorised use of the phone or
certain features on the phone when the power is turned on. By
setting this option on, your phone or certain features on your
phone are locked until the correct handset code is entered.
Select “On” for “Handset Lock” if you wish to activate the
Handset Lock.
128 Settings
Function Lock
By setting this option on, all the functions of your phone will be
locked until the correct handset code is entered.
Enter your handset code for “Function Lock” if you wish to
activate the Function Lock.
To Turn Off the Function Lock
Enter your handset code in standby to turn the Function Lock
off.
Phonebook Lock
The Phonebook Lock function prevents unauthorised use of
your Phonebook.
Select “On” to lock or “Off” to unlock for “Phonebook Lock” and
enter your handset code.
For details on the handset code, see “Changing the Handset
Code” on page 129.
Showing Secret Data
By setting this option on, the hidden data can be displayed.
Select “On” to display or “Off” to hide for “Show Secret Data”.
Enter your handset code when you select “On”.
For details on the handset code, see “Changing the Handset
Code”.
Changing the Handset Code
The default handset code is “9999”.
Select “Change Handset Code” and enter the old handset code,
then enter a new handset code twice.
Internet Settings (M 9-d-d-4)
Note
• In normal operations, you do not need to change the
settings.
• Internet settings have already been entered in your phone
depending on your service provider. You may have
restrictions on viewing, deleting, copying or modifying the
settings. Contact your service provider for details.
Browser Settings (M 9-d-d-4-1)
“Settings” → “Other Settings” tab → “Internet
Settings” → “Browser Settings” → “Create New”
“Profile Name”:
WAP profile name (Unique
name)
“Proxy”:
Proxy setting for WAP (When
“Use Proxy” is On)
“Access Point”:
Access point for WAP (When
“Use Proxy” is Off)
“Use Proxy”:
Setting to connect by Proxy or
not
“Home”:
Home page URL (When “Use
Proxy” is Off)
JAVA™ Settings (M 9-d-d-4-2)
“Settings” → “Other Settings” tab → “Internet
Settings” → “JAVA™ Settings” → “Create New”
“Profile Name”:
Profile name for JAVA™
application (Unique name)
“Proxy”:
Proxy setting for JAVA™
application (When “Use Proxy” is
On)
“Access Point”:
Access point for JAVA™
application (When “Use Proxy” is
Off)
Setting to connect by Proxy or not
“Use Proxy”:
Settings 129
Streaming Settings (M 9-d-d-4-3)
“Settings” → “Other Settings” tab → “Internet
Settings” → “Streaming Settings” → “Create New”
“Profile Name”:
Profile name for streaming
(Unique name)
“Proxy Address”:
Proxy address
“Proxy Port Number”:
Port number (1-65535)
“Access Point”:
Access point
Proxy Settings (M 9-d-d-4-4)
“Settings” → “Other Settings” tab → “Internet
Settings” → “Proxy Settings” → “Create New”
“Proxy Name”:
Proxy name (Unique name)
“Proxy Address”:
IP address
“Access Point”:
Access point
“Home”:
Home page URL
“Port Number”:
Port number (1-65535)
“Authentication Type”:
Authentication Type
(“HTTP-BASIC” or
“HTTP-DIGEST”)
“User Name”:
User name for authentication
“Password”:
Password for authentication
130 Settings
Access Point Settings (M 9-d-d-4-5)
“Settings” → “Other Settings” tab → “Internet
Settings” → “Access Point Settings” → “Create New”
“Access Point Name”: Access point name (Unique
name)
“APN”:
APN setting
Authentication type (“NONE”,
“Authentication Type”:
“PAP” or “CHAP”)
“User Name”:
User name for access point
“Password”:
Password for access point
“DNS”:
DNS (Domain Name System)
“Linger Time”:
Linger Time (1-99999 sec.)
Re-provisioning Settings (M 9-d-d-4-6)
“Settings” → “Other Settings” tab → “Internet
Settings” → “Re-provisioning Settings” → “Execute
Pending”
Clearing DNS Cache (M 9-d-d-4-7)
“Settings” → “Other Settings” tab → “Internet
Settings” → “Clear DNS Cache”
To Activate the Browser/JAVA™/Streaming Profile
“Settings” → “Other Settings” tab → “Internet
Settings”
1. Select “Browser Settings”, “JAVA™ Settings” or
“Streaming Settings”.
2. Select the desired profile you wish to activate.
Network Settings (M 9-d-d-5)
To Select a Service Automatically
Each time the power is turned on, your phone selects a service
automatically.
“Settings” → “Other Settings” tab → “Network
Settings” → “Select Service”
1. Select “Auto”.
To Edit/Copy/Delete the Browser/JAVA™/Streaming/Proxy/
Access Point Profile
“Settings” → “Other Settings” tab → “Internet
Settings”
1. Select “Browser Settings”, “JAVA™ Settings”,
“Streaming Settings”, “Proxy Settings” or “Access Point
Settings”.
2. Highlight the desired profile.
3. Press [Options] and select the desired option.
“Edit”:
“Copy”:
“Delete”:
Modify the desired item
Enter the new file name
Press [Yes] to delete
Settings 131
To Select a Network Automatically
Each time the power is turned on, your phone always tries to
connect to the preferred network.
If your phone is not connected to the network, you can perform
the following immediately to establish the preferred network
connection.
“Settings” → “Other Settings” tab → “Network
Settings” → “Select Network” → “Automatic”
To Select the Network Manually
“Settings” → “Other Settings” tab → “Network
Settings” → “Select Network” → “Manual”
1. Select the desired network.
To Add a New Network
“Settings” → “Other Settings” tab → “Network
Settings” → “Select Network” → “Add New Network”
If there are no entries, press B and go to step 2.
If there is an entry, press B and perform the following steps.
1. Select “Add”.
2. Enter the country code (up to 3 digits).
3. Enter the network code (up to 3 digits).
4. Enter a new network name (up to 25 characters).
5. Enter either 2G (GSM) or 3G for the network type.
132 Settings
To Edit the Preferred List
“Settings” → “Other Settings” tab → “Network
Settings” → “Select Network” → “Set Preferred”
1. Select the name of the network you wish to edit.
2. Select “Insert” to insert over the selected position, “Add
to end” to insert at the end or “Delete” to delete.
Showing the Network Information
“Settings” → “Other Settings” tab → “Network
Settings” → “Network Information”
Information about the operator is displayed.
Call Log (M 11)
The phone will record the last 30 missed calls, received calls
and dialled numbers.
Viewing Call Log
“Call Log”
1. Select from “All Calls”, “Dialled Numbers”, “Missed
Calls” or “Received Calls”.
The selected call log list is displayed.
To switch logs, press c or d.
2. Select the phone number you wish to view.
If you wish to dial the number, press D to make a voice
call or long press D to make a video calling.
Call Timers (M 11-5)
This function lets you check the duration of your calls.
Checking the Duration of the Last Call and All Calls
“Call Log” → “Call Timers”
1. Select “Dialled Calls” or “Received Calls”.
Resetting Call Timers (M 11-5-3)
“Call Log” → “Call Timers” → “Clear Timers”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 129.
Tip
• You can also confirm call logs by pressing D in standby.
Sending Messages
1. In the call log list, highlight the phone number or name
you wish to send a message to.
2. Press [Options] and select “Create Message”.
For details on creating a message, see “Creating a New
Message” on page 66.
Deleting a Call Log
1. In the call log list, press [Options] and select “Delete” or
“Delete All”.
Call Log
133
Call Costs (M 11-6)
This function lets you check the charges for your calls. Some
networks do not support Charging Advice. Please check with
your service provider for availability.
Checking the Cost of the Last Call (M 11-6-1)
“Call Log” → “Call Costs” → “Last Call”
Checking the Total Call Cost (M 11-6-2)
“Call Log” → “Call Costs” → “All Calls”
Setting the Charge Rate (M 11-6-5)
Set the charge rate to calculate the call cost and set the
maximum limit for call cost.
“Call Log” → “Call Costs” → “Cost Units” → “Set
Units”
1. Enter your PIN2 code.
2. Enter a currency unit (up to 3 characters).
3. Enter a cost per unit.
To enter a decimal point, press P.
Setting the Charge Limit (M 11-6-6)
This function is useful if you wish to make sure you do not
exceed a certain charge limit.
“Call Log” → “Call Costs” → “Max Cost” → “Set Limit”
1. Enter your PIN2 code.
2. Enter a value.
134 Call Log
Checking the Residual Credit (M 11-6-3)
“Call Log” → “Call Costs” → “Residual Credit”
Resetting All Call Costs (M 11-6-4)
“Call Log” → “Call Costs” → “Clear Costs”
1. Enter your PIN2 code.
Data Counter (M 11-7)
You can confirm the number of bytes used in the 3G (UMTS)
and GSM transmission.
“Call Log” → “Data Counter”
1. Select from “Last Data” or “All Data”.
Resetting All Data Counter (M 11-7-3)
“Call Log” → “Data Counter” → “Clear Counter”
Connectivity (M 12)
By configuring the settings in this menu, you can connect to
Bluetooth wireless technology enabled phones, as well as PCs
(USB connection is possible using Data Cable accessory).
Bluetooth (M 12-1)
For using the Bluetooth wireless function, you need to search
for other Bluetooth wireless technology enabled devices to
establish contact with your phone. Keep your phone within a
distance of 10 metres from the devices before searching.
Using the Bluetooth Wireless Function
To Turn On or Off the Bluetooth Wireless
Function (M 12-1-1)
“Connectivity” → “Bluetooth” → “Switch On/Off”
1. Select “On” or “Off”.
When “On” is selected, the Bluetooth wireless setting is
activated, and “ ” is displayed.
To Show or Hide Your Phone (M 12-1-2)
“Connectivity” → “Bluetooth” → “Visibility”
1. Select the desired visibility settings.
“Show My Phone”:
Allows other devices to
recognise your phone.
“Hide My Phone”:
Hides your phone from other
devices.
To Search for Devices to be Paired (M 12-1-3)
A maximum of 16 devices can be searched for.
“Connectivity” → “Bluetooth” → “Search for Devices”
1. Select the desired device for pairing.
2. Enter the device passcode.
Note
• You can search for devices even when the Bluetooth wireless
function is off. Once pairing is started, the phone turns the
Bluetooth wireless function on automatically.
• You can only select one device for pairing. To change the
paired device, see “To Activate the Paired Device” on
page 136.
• Pairing means authentication has been established between
the two devices.
• In order to pair two devices with Bluetooth wireless
technology, the users should agree on the same passcode
for both devices.
• The passcode is used only once, so there is no need to
remember it. The passcode can be different each time the
devices are connected.
• Devices that do not have a user interface (i.e., headsets and
car kits) have a factory-set passcode. See the user guide for
the device.
Connectivity 135
Tip
• You can save battery power by turning the Bluetooth wireless
function off while it is not in use. Turn the Bluetooth wireless
function off in “To Turn On or Off the Bluetooth Wireless
Function” on page 135 or in “To Turn Off Automatically” on
page 137.
• During a call, you can divert voice calls to the paired
handsfree device. Press [Options], select “Transfer Audio”
and then “To Handset” or “To Bluetooth”.
To Activate the Paired Device
Paired devices are listed by tabs for all devices for handsfree
devices and for Audio devices.
“Connectivity” → “Bluetooth” → “Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Select the desired device you wish to activate.
To Check the Paired Handsfree Devices
“Connectivity” → “Bluetooth” → “Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Highlight the desired handsfree device.
3. Press B to check the handsfree device.
136 Connectivity
To Check the Audio Device
“Connectivity” → “Bluetooth” → “Paired Devices”
1. Press d twice to switch to the list for Audio devices.
2. Highlight the desired Audio device.
3. Press B to check the Audio device.
To Rename or Delete the Paired Devices
“Connectivity” → “Bluetooth” → “Paired Devices”
1. Press c or d to switch between all paired devices and
handsfree devices.
2. Highlight the desired device.
3. Press [Options].
4. Select “Change Name” or “Delete”.
You can rename or delete by pressing B after selecting
desired device.
To Send All Data to Other Devices (M 12-1-5)
You can send all the data for applications such as Phonebook,
Calendar, Tasks to selected devices.
“Connectivity” → “Bluetooth” → “Send All”
1. Select the desired device.
If a device is not specified, searching starts automatically.
2. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 129.
3. Select the desired data to send.
4. Enter the device passcode for unpaired devices.
Note
• If the handsfree device is connected, the confirmation
screen to deactivate the handsfree function is displayed.
Press [Yes] to deactivate.
Bluetooth Wireless Settings (M 12-1-6)
With this setting you can rename your phone, prevent other
devices from recognising your phone and turn the Bluetooth
wireless function off automatically to save battery power, etc.
To Rename Your Phone
You can rename your phone. The name is shown on other
devices when your phone is detected.
“Connectivity” → “Bluetooth” → “Bluetooth Settings”
→ “Device Name”
1. Enter the new device name.
To Turn Off Automatically
“Connectivity” → “Bluetooth” → “Bluetooth Settings”
→ “Bluetooth Timeout”
1. Select the desired time.
Your phone turns the function off automatically after the
specified time.
To Select the Sound Output
“Connectivity” → “Bluetooth” → “Bluetooth Settings”
→ “Sound Output”
1. Select “Phone/Earphone” or “Bluetooth Device”.
To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two
modes; talking with the handsfree kit or talking with the phone.
“Connectivity” → “Bluetooth” → “Bluetooth Settings”
→ “Handsfree Setting”
1. Select “Handsfree mode” or “Private mode”.
“Handsfree mode”: For talking with the handsfree kit
“Private mode”:
For talking with the phone
Connectivity 137
To Turn the Authentication Request On or Off
You can request the sender or receiver of the data to
authenticate the passcode (exchanging the passcode) before
pairing devices.
“Connectivity” → “Bluetooth” → “Bluetooth Settings”
→ “Authentication”
1. Select “On” or “Off”.
Note
• No authentication is required for the paired devices.
• Even if you select “Off”, you may authenticate the passcode
when the sender requests it.
To See Your Phone Details
“Connectivity” → “Bluetooth” → “Bluetooth Settings”
→ “My Phone Details”
Mass Storage (M 12-2)
You can set the phone to connect to a PC via Mass Storage
mode.
“Connectivity” → “Mass Storage”
1. Press [Yes].
Note
• Activating Mass Storage mode also activates offline mode.
• Mass Storage is not available when the battery is low, a
Java™ application is paused, Music Player is active, or a
memory card is not inserted in your phone.
138 Connectivity
USB Charge (M 12-3)
You can set the phone to charge via USB, connected to a PC.
“Connectivity” → “USB Charge”
1. Select “Enable” or “Disable”.
Card Settings (M 12-4)
Formatting Memory Card
“Connectivity” → “Card Settings” → “Format Card”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 129.
2. Press [Yes] to start formatting.
Off Line Mode (M 12-5)
When the Off Line Mode is set to “On”, the phone cuts off the
network connections and stops searching for available
networks to connect. With this mode, you can play games or
music even when you fly.
“Connectivity” → “Off Line Mode”
1. Select “On” or “Off”.
Backup/Restore (M 12-6)
With a memory card inserted in your phone, you can make
backup files of Bookmarks, Text, Phonebook entries, Calendar
and Tasks in the handset memory to the memory card. You can
also restore the backup data from the memory card.
Making a Backup File (M 12-6-1)
“Connectivity” → “Backup/Restore” → “Backup”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 129.
2. Select the desired item to back up or “Select All” to back
up all files.
Restoring a Backup File (M 12-6-2)
“Connectivity” → “Backup/Restore” → “Restore”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 129.
2. Select the desired item to restore or “Select All” to
restore all files.
3. Select the desired file to restore.
A confirmation message indicating deletion from the
handset memory is displayed.
4. Press [Yes] to start restoring.
Note
• To delete a backup file, highlight the desired item, press
[Options] and select “Delete” after performing steps 1 to 3.
Connectivity 139
Connecting SX663 to Your PC
(SX663 CD-ROM may be purchased separately.)
You can use the following functions by connecting the SX663
to your PC using a USB data cable or via Bluetooth wireless
technology:
• 3G/GSM modem
• Handset Manager for SX663
• Music Manager for SX663
• Sync Manager for SX663
System Requirements
Operating System:
Windows 2000*, Windows XP**, Windows Vista
* Service Pack 4 or later
** Service Pack 2 or later
Supported Software:
Microsoft Outlook/Outlook Express
Interface:
USB port or Bluetooth wireless port
CD-ROM drive
To use Music Manager, DirectX9 and Windows Media Player 9
or later are required.
140 Connecting SX663 to Your PC
3G/GSM Modem
You can use SX663 as a 3G/GSM modem to access the
Internet from your PC. Connect your phone to your PC via
Bluetooth wireless technology or USB interface. Software
installation on your PC is required.
Modem via the USB Data Cable
1. Insert the CD-ROM into your PC’s CD-ROM drive.
The SX663 CD-ROM screen is displayed.
If the SX663 CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
2. Select the USB driver from the on-screen instructions of
your CD-ROM, and start installation of USB driver
software following the on-screen instructions of your
CD-ROM.
• During installation, the on-screen instructions ask you to
connect your phone to your PC. Power on your phone
and attach the phone to the USB port of your PC using
the USB data cable (optional accessory).
3. Follow the on-screen instructions to complete
installation.
4. Select the modem driver from the on-screen
4. Select the modem driver from the on-screen
instructions of your CD-ROM, and install modem driver
software following the on-screen instructions of your
CD-ROM.
instructions of your CD-ROM, and install modem driver
software following the on-screen instructions of your
CD-ROM.
5. Follow the on-screen instructions to use your phone as
5. Follow the on-screen instructions to use your phone as
a modem driver.
• When the on-screen instructions ask modem driver
type, select the cable as a modem driver.
a modem driver.
• When the on-screen instructions ask modem driver
type, select Bluetooth as a modem driver.
Modem via Bluetooth Connection
1. Turn on the Bluetooth wireless function of your phone.
For details, see “To Turn On or Off the Bluetooth Wireless
Function” on page 135.
2. Pair your PC with your phone.
For details on pairing your PC with your phone, see “To
Search for Devices to be Paired” on page 135.
3. Insert the CD-ROM into your PC’s CD-ROM drive.
The SX663 CD-ROM screen is displayed.
If the SX663 CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
Note
• Modem communication is not possible while communicating
with the Handset Manager via Bluetooth wireless technology
or USB interface.
• It is not recommended that you make or answer calls when
you are using SX663 as a GSM/GPRS modem. The operation
may be interrupted.
• Your phone exhausts the battery when connected to a PC,
even when not communicating.
• For a detailed explanation on how to use the Modem driver,
please click and refer to the help on the Modem Driver.
Connecting SX663 to Your PC 141
Handset Manager
3. Follow the on-screen instructions to complete
You can transmit the following items between your phone and
your PC, and can use Phonebook entries on your PC:
• Gallery files (pictures/sounds/video clips/Other Documents
data)
• Phonebook entries
• Short messages
• Schedule entries
installation.
• During installation, the on-screen instructions ask you to
select an interface. Select the USB data cable as an
interface.
4. Connect your phone to your PC. Power on your phone
and attach the phone to the USB port of your PC using
the USB data cable (optional accessory).
Via USB Data Cable
1. Insert the CD-ROM into your PC’s CD-ROM drive.
The SX663 CD-ROM screen is displayed.
If the SX663 CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
2. Select Handset Manager from the on-screen
instructions of your CD-ROM, and start installation of
Handset Manager software following the
on-screen instructions of your CD-ROM.
• If you have not installed the USB driver, follow steps 2
and 3 on page 140.
5. Select [Yes] for Mass Storage mode.
142 Connecting SX663 to Your PC
For details on activating this mode, see “Mass Storage” on
page 138.
6. Launch Handset Manager from the relevant folder.
7. Follow the on-screen instructions of Handset Manager.
Via Bluetooth
1. Insert the CD-ROM into your PC’s CD-ROM drive.
The SX663 CD-ROM screen is displayed.
If the SX663 CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
2. Select Handset Manager from the on-screen
instructions of your CD-ROM, and start installation of
Handset Manager software following the
on-screen instructions of your CD-ROM.
3. Follow the on-screen instructions to complete
• If you have already installed Sharp Handset Manager, you
need to uninstall the previous one.
• If you have trouble with installation, uninstall Handset
Manager, restart your PC, reinstall Handset Manager and
restart.
Music Manager
You can manage the playlist and exchange sound files on your
PC. Available files are the sound files in the following formats:
MP3, AAC, 3GPP.
installation.
• During installation, the on-screen instructions ask you to
select an interface. Select Bluetooth as an interface.
4. Select [Yes] for Mass Storage mode.
For details on activating this mode, see “Mass Storage” on
page 138.
5. Launch Handset Manager from the relevant folder.
6. Follow the on-screen instructions of Handset Manager.
Note
• Some large files may not be able to be transmitted from the
PC to the phone.
• Applications (Camera, Gallery, etc.) do not run when the
phone is connected to the PC via Bluetooth wireless
technology interface or USB data cable.
Connecting SX663 to Your PC 143
Main Control Panel
Play
Previous
Next
Add Playlist
Add Smart Playlist
Remove Playlist
Search Media File
Browse
Input Window
Media Management
in PC
Media Management
in Handset
Main Control Panel
Control all the main actions from here.
Play:
Playing back a file.
Previous:
Returns to the top portion of the
current file.
Next:
Jumps to the next file.
Search Media File:
Search media file.
Browse:
Browse all the media files sorted in
Genre/Artist/Album.
Input Window:
Quickly find the media files in Library
or the playlist with keyword entry.
144 Connecting SX663 to Your PC
Media Management in PC
Media files in PC can be easily explored in 2 main columns.
Add Playlist:
Creating new playlist.
Add Smart Playlist:
Creating new smart playlist.
Remove Playlist:
Removing playlist.
Media Management in Handset
Media files in Handset can be easily explored in 2 main
columns.
• With the drag and drop operation, you can upload the sound
files and the playlists from your PC, and also download them
to your PC.
• With the drag and drop operation, you can change the order
of tracks in the playlist of your PC.
• You can create a new playlist and delete an existing playlist.
• With the drag and drop operation, you can add a sound file
to a playlist, and delete them from the playlist.
• You can edit the name of a playlist of your PC.
• You can edit the title, artist name, and album name of sound
files of your PC. (only available in MP3 format)
Sync Manager
You can synchronise the following data with the data of
Microsoft Outlook or Outlook Express on your PC.
• Phonebook entries.
• Schedule entries.
Tip
• You can set up Sync Manager to start up and synchronise
automatically after you connect your phone to your PC via the
USB data cable.
Tip
• To add tracks from your PC into the Music Manager library,
go to “Advanced” then search music tracks.
• Once you have created your list, drag the list to the SX663
area on Music Manager, and the files will be uploaded to the
SX663. If one or more of the files is already stored on the
handset, Music Manager will not upload them again; the
playlist will play the track already uploaded.
• Music Manager also allows you to import existing playlists
(M3U file type) that you may have created using other media
programs.
• Use Smart Playlist to automatically add tracks to a playlist
based on criteria you can select.
Connecting SX663 to Your PC 145
Troubleshooting
Problem
Solution
The phone does not turn
on.
• Make sure the battery is properly
inserted and charged.
• Make sure you have entered the
correct code (4 to 8 digits).
• Your SIM/USIM card/protected
functions will become locked after
three unsuccessful attempts.
• Contact your SIM/USIM provider if
you do not have the correct PIN
code.
• Enter the PUK code (8 digits)
provided by your service provider (if
supported).
• If the attempt is successful, enter
the new PIN code and confirm your
phone is operational again.
Otherwise contact your dealer.
PIN code or PIN2 code is
rejected.
The SIM/USIM card
becomes locked.
146 Troubleshooting
Problem
Solution
The display is difficult to
read.
• Adjust the backlight brightness for
the display.
• Check the radio signal strength
indicator as you may be outside the
service area.
• Check to see if any error message
is displayed when you turn your
phone on. If so, contact your dealer.
• Make sure the SIM/USIM card is
correctly inserted.
• Your current location may not
provide good call quality (i.e., in a
car or train). Move to a location
where radio signal strength is
greater.
• Make sure you are correctly
subscribed for the Short Message
Service, that the network supports
this service, and that the centre
number is set up correctly. If not,
contact your network service
provider.
Phone functions do not
work after the phone is
turned on.
Call quality is poor.
Cannot send or receive
text message.
Problem
Calls cannot be made or
received.
Cannot access network
service.
Limited memory
available.
Solution
• If the message “Insert SIM card” is
displayed when the phone is
switched on, you cannot use your
SIM/USIM card or the SIM/USIM
card is damaged. Contact your
dealer or network service provider.
• Check your call barring, fixed
dialling setting, remaining battery
and call forwarding settings.
• Check if your phone is currently
performing data communication
using Bluetooth wireless
technology interface or a USB data
cable.
• Check the remaining balance if you
are using a pre-paid SIM/USIM
card.
• Check where your account has
been registered and where the
service is available.
• Delete any unnecessary data.
Problem
Cannot connect to
Multimedia Messaging
Service provider.
Call is terminated
unexpectedly.
No entries are displayed
in the Phonebook.
Cannot receive OBEX
data.
Solution
• MMS settings and configuration
may be missing or incorrect or the
network does not support it. Check
your service provider’s access point
number.
Contact your service provider to
confirm the correct settings.
• Magnetised objects such as health
necklaces placed near the phone
may terminate the call. Keep your
phone away from such objects.
• Confirm that the Source setting
(Handset or SIM/USIM) is correct.
• The OBEX data can only be received
in standby.
Troubleshooting
147
Safety Precautions and Conditions of
Use
• Observe the rules concerning the use of mobile phones at
gasoline stations, chemical plants and at all sites where a
risk of explosion exists.
Your phone conforms to international regulations insofar as it is
used under normal conditions and in accordance with the
following instructions.
Caring for your phone
• Do not allow children to use your phone without supervision.
• Do not open or attempt to repair your phone yourself. The
product can only be repaired by authorised service
personnel.
• Do not drop your phone or subject it to severe impacts.
Bending the body and pushing the display or keys with
extreme force could damage the phone.
• Do not use solvents to clean your phone. Use only a soft, dry
cloth.
• Do not carry your phone in your back pocket as it could break
when you sit down. The display is made of glass and is
particularly fragile.
• Avoid touching the external connector on the underside of
the phone, since the delicate components within can be
damaged by static electricity.
Conditions of Use
Electromagnetic waves
• Do not switch on your phone aboard an aircraft (as your
phone may interfere with the aircraft’s electronic systems).
Current legislation forbids this use and legal action can be
taken against the user.
• Do not switch on your phone in a hospital, except in
designated areas.
• Use of your phone’s function may affect the performance of
medical electronic units (pacemakers, hearing aids, insulin
pumps, etc.). When the phone function is on, do not bring it
near medical equipment or into areas in which medical
equipment is being used. If you have a hearing aid or a
pacemaker, only use the phone on the opposite side of your
body from where it is located. The phone should be kept at
least 6 inches (15.24 cm) from a pacemaker ANYTIME the
phone is switched on.
• Do not switch on your phone near gas or flammable
substances.
148 Safety Precautions and Conditions of Use
Battery
• Use your phone only with batteries, chargers and
accessories recommended by the manufacturer. The
manufacturer disclaims any liability for damage caused by
the use of other chargers, batteries or accessories.
• Network configuration and phone usage will affect
talk-time and standby time.
Using the games or camera will hasten battery consumption.
• When the battery charging alert is displayed on the
screen, charge the battery as soon as possible. If you
continue using your phone ignoring the alert, the phone may
cease to function, and all data and settings you have stored
may be lost at any moment.
• Before removing the battery from the phone, make sure the
phone is switched off.
• Replace and charge the new battery as soon as possible
after removing the old one.
• Do not touch the battery terminals. Batteries can cause
damage, injury or burns if a conductive material touches
exposed terminals. When the battery is detached from the
phone, use a cover made of non-conductive material for
keeping and carrying the battery safely.
• Recommended temperature for using and storing batteries is
approximately 20°C.
• The batteries’ performance is limited in low temperatures,
particularly below 0°C and the phone may not work
temporarily regardless of the amount of remaining battery
power.
• Exposing the phone to extreme temperatures will shorten
battery life.
• The battery can be charged and discharged hundreds of
times but it will eventually wear out. When the operating time
(talk-time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE,
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
See “Battery Disposal” on page 12.
Safety Precautions and Conditions of Use 149
Aerial Care
• Do not cover the top of the phone (p. 10, No. 22) with your
hand when in use as this may interfere with the performance
of the built-in aerial. Call quality may deteriorate leading to
shortened talk-time and standby time because the mobile
phone has to operate on a higher power level than is
necessary.
• Use only the aerial supplied or one approved by Sharp for
your mobile phone. Using unauthorised or modified aerials
may damage the mobile phone. Moreover, since the mobile
phone may violate the appropriate regulations, it may lose
performance or exceed the limitation of SAR levels.
• To avoid impaired performance, do not damage the aerial of
the mobile phone.
• To avoid interfering with blasting operations, please turn off
the mobile phone in a blasting area or in a place where a
“turn off two-way radio” sign is posted.
150 Safety Precautions and Conditions of Use
Camera Operation
• Learn picture quality, file formats, etc. beforehand.
The taken pictures can be saved in JPEG format.
• Be careful not to move your hand while taking pictures.
If the phone moves while taking a picture, the picture can
become blurred. When taking a picture, hold the phone
firmly to prevent it from moving, or use the delay timer.
• Clean the lens cover before taking a picture.
Fingerprints, oils, etc. on the lens cover hinder clear
focusing. Wipe them off with a soft cloth before taking a
picture.
Others
• As with any electronic storage unit, data may be lost or
corrupted under various circumstances.
• Before connecting the phone with a PC or a peripheral unit,
read the operation manual for the other unit carefully.
• If the phone’s battery has been removed for some time, or
the phone has been reset, the unit’s clock and calendar may
be reinitialised. The date and time should be updated in this
case.
Environment
• Keep your phone away from extreme heat. Do not leave it on
the dashboard of a car or near a heater. Do not leave it in any
place that is extremely damp or dusty.
• Since this product is not waterproof, do not use it or store it
where fluids such as water can splash onto it. Raindrops,
water spray, juice, coffee, steam, perspiration, etc. will also
cause malfunctions.
Precautions Concerning Vehicle Use
• It is the user’s responsibility to check the local laws
governing the use of a mobile phone in vehicles. Pay full
attention to driving. Pull off to the side of the road, park the
car, and switch off the engine before making or answering a
call.
• Use of your phone’s function may interfere with the vehicle’s
electronic systems, such as the ABS anti-lock brakes or the
air-bag. To ensure no such problem occurs, please check
with your dealer or car manufacturer before connecting your
phone.
• Only allow qualified service maintenance personnel to install
the vehicle accessories.
The manufacturer disclaims any liability for damage which may
result as a consequence of improper use or use contrary to the
instructions contained herein.
SAR
Your Sharp mobile phone has been designed, manufactured
and tested so as not to exceed the limits for exposure to
electromagnetic fields recommended by the Council of the
European Union. These limits are part of comprehensive
guidelines developed by independent scientific organisations.
The guidelines include a substantial safety margin designed to
assure the safety of the phone user and others and to take into
account variations in age and health, individual sensitivities and
environmental conditions. European standards provide for the
amount of radio frequency electromagnetic energy absorbed by
the body when using a mobile phone to be measured by
reference to the Specific Absorption Rate (SAR). The SAR limit
for the general public is currently 2 watts per kilogram
averaged over 10 grams of body tissue. Your Sharp mobile
phone SAR value is 1.215 watts per kilogram. This has been
tested to ensure that this limit is not exceeded even when the
phone is operating at its highest certified power. In use
however your Sharp mobile phone may operate at less than full
power because it is designed to use only sufficient power to
communicate with the network.
Safety Precautions and Conditions of Use 151
FCC NOTICE
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
Exposure to Radio Waves
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These
limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a
unit of measurement known as the Specific Absorption Rate, or
152 Safety Precautions and Conditions of Use
SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR
are conducted using standard operating positions specified by
the FCC with the phone transmitting at its highest certified
power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR
level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to
a wireless base station aerial, the lower the power output.
Before a phone model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the
limit established by the government-adopted requirement for
safe exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as required by
the FCC for each model. The highest SAR value for this model
phone when tested for use at the ear is 0.417 W/kg and when
worn on the body, as described in this user guide, is 0.462
W/kg. Body-worn Operation; This device was tested for typical
body-worn operations with the back of the phone kept 1.5 cm
from the body. To maintain compliance with FCC RF exposure
requirements, use accessories that maintain a 1.5 cm
separation distance between the user’s body and the back of
the phone. The use of belt-clips, holsters and similar
accessories should not contain metallic components in its
assembly.
The use of accessories that do not satisfy these requirements
may not comply with FCC RF exposure requirements, and
should be avoided. While there may be differences between the
SAR levels of various phones and at various positions, they all
meet the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID APYHRO00060.
Additional information on Specific Absorption Rates (SAR) can
be found on the Cellular Telecommunications & Internet
Association (CTIA) web-site at http://www.phonefacts.net.
* In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. The standard incorporates a
substantial margin of safety to give additional protection for
the public and to account for any variations in
measurements.
Safety Precautions and Conditions of Use 153
Out of Warranty List
This limited warranty shall not apply in respect of the following:
(i) Any deterioration due to normal wear and tear including all
plastic surfaces and all other externally exposed parts that
are scratched or damaged due to normal customer use.
(ii) Defects caused by the Product being subjected to any of
the following: use in contradiction with the user guide,
rough handling, exposure to moisture, dampness or
extreme thermal or environmental conditions or rapid
changes in such conditions, corrosion, oxidation,
unauthorised modifications or connections, unauthorised
opening or repair, repair by use of unauthorised spare
parts, misuse, improper installation, accident, forces of
nature, spillage of food or liquid, influence from chemical
products or other acts beyond Sharp’s reasonable control
(including but not limited to lifetime, and breakage of or
damage to aerials) unless the defect was caused directly
by defects in materials or workmanship.
(iii) Products in respect of which the product serial number or
the IMEI number has been removed, erased, defaced,
altered or made illegible.
154 Out of Warranty List
(iv) Defects caused by the fact that the Product was used with
or connected to a product or an accessory not
manufactured or supplied by Sharp or was used other
than for its intended use.
(v) Defects caused by a defective function of the cellular
network.
(vi) Defects caused by the fact that the battery was shortcircuited or seals of the battery enclosure or cells were
broken or show evidence of tampering or the battery was
used in equipment other than for which it has been
specified.
(vii) Defects caused by the need to upgrade Products software
due to changes in cellular network parameters.
(viii) Products operated outside published maximum ratings.
(ix) Products rented on a monthly basis.
Charger Plug:
Do not use the AC Charger if the plug does not fit the socket.
Index
A
Alarms 100
Area Info 74
B
Battery 11, 149
Bluetooth 135
Browser 79
Browser Settings 81
Navigating a WAP or Web
Page 80
C
Calculator 106
Calendar 97
Call Functions 21, 133
Auto Redial 126
Call Costs 134
Call Restrictions 124
Call Timers 126, 133
Call Waiting 24, 123
Conference Call 24
Data Counter 134
Earpiece Volume 23
Emergency Calls 21
International Calls 21
Make Another Call 23
Minute Minder 125
Muting the
Microphone 25,
27, 127
My Phone Number 123
Redialling 22
Rejecting a Call 23, 26,
125
Sending a Busy Tone 23,
26
Speaker 23, 27, 126
Speed Dialling 22, 50
Video Calling 27, 126
Voice Call 21, 23
Voicemail & Diverts 121
Call Log 133
Camera 58
Continuous Shoot 63
Digital Zoom 59
Display Direction 60
Exposure 59
Focus Mode 60
Picture Quality 60
Picture Size 62, 65
Recording Time 65
Recording Video Clips 59,
65
Settings 59
Shortcut Keys 62
Switching Modes 61
Taking Pictures 58
Video Encoding 65
Video Quality 60
Cell Broadcasts 73
Characters
Changing the Input
Method 31
Chinese User
Dictionary 36
Cutting, Copying, Pasting
Text 39
Entering Characters 30
Input Language 31
Text Templates 39, 87
Chinese User Dictionary 36
Creating 36
Deleting 36
Editing 36
Using 37
Conditions of Use 148
Connectivity 135
Countdown Timer 105
D
Display Indicators 18
E
Expenses Memo 108
F
FM Radio 56
G
Gallery 84
Other Documents 88
Games & Applications 92
Java™ Settings 94
H
Handset Code 129
Help 108
K
Keypad Lock 17
M
Main Menu 40
Mass Storage 138
Master Reset 121
Index 155
Memory Card 14, 139
Memory Status 50, 91, 100,
104
Messaging 66
Attaching/Removing
Data 68
Creating a Message 66
Drafts Box 70
Email 66, 78
Forwarding a Message 72
Mailing List 45
MMS 66, 71, 76
Reading a Message 70
Replying to a Message 72
Sending Options 69
Settings 74
SMS 66, 75
Video Clip Message 70
Voice Clip Message 70
Mobile TV 57
Multimedia 51
Music and Sounds 86
Music Player 54
Adding a File 56
Adding a New Playlist 54
Downloading Music 56
Playing Back Music 54
156 Index
Sorting 55
N
Navigating Functions 20
O
Off Line Mode 139
Organiser 97
P
PC Connection 140
Phonebook
Adding New Entry 41
Category 49
Dialling from an Entry 43
Editing Entries 46
Group 45
Saving a Number 42
Saving an Address 71
Saving an Image 85
Searching the List 42
Sending a Message 45,
46
Storage Memory 41
Thumbnail 46
Phonebook Lock 128
Pictures 84
PIN/PIN2 Code 127
Power On and Off 16
S
U
Safety Precautions 148
Set Java™ Wallpaper 96
Settings 110
Date & Time 119
Display 115
Internet 129
Language 120
Network 131
Profiles 110
Security 127
Shortcuts 120
Slider 118
Sound 118
SIM Application 109
SIM/USIM Card 11
Stopwatch 102
Streaming 53
USB Charge 138
T
T9 Text Input
Using PinYin mode 34
Using Stroke mode 34
Using T9 English Mode 32
Tasks 102
Themes 86
Troubleshooting 146
V
Videos 51, 85
Adding a File 51
Adding a New Playlist 52
Downloading Video 53
Playing Back Video 51
Searching a File 51
Settings 52
Voice Recorder 107
W
World Clock 105