Bosch GLL2-10 Operating instructions

OBJ_BUCH-1236-001.book Page 1 Thursday, May 20, 2010 1:04 PM
Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
Germany
GLL 2 Professional
www.bosch-pt.com
1 609 929 W91 (2010.05) T / 218 XXX
de
en
fr
es
pt
it
nl
Originalbetriebsanleitung
Original instructions
Notice originale
Manual original
Manual original
Istruzioni originali
Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el
tr
pl
cs
sk
hu
ru
Πρωτότυπο οδηγιών χρήσης
Orijinal işletme talimat
Instrukcja oryginalna
Původní návod k používání
Pôvodný návod na použitie
Eredeti használati utasítás
Оригинальное руководство по эксплуатации
uk Оригінальна інструкція з
експлуатації
ro Instrucţiuni originale
bg Оригинална инструкция
sr
sl
hr
et
lv
lt
cn
Originalno uputstvo za rad
Izvirna navodila
Originalne upute za rad
Algupärane kasutusjuhend
Instrukcijas oriģinālvalodā
Originali instrukcija
正本使用说明书
OBJ_BUCH-1236-001.book Page 4 Thursday, May 20, 2010 12:18 PM
4|
2
1
3
9
8
700
63
1K
3 60 LR6
2
5V
n
GLL 3 x 1. na
ge
t.: Chi
s2
rdin
Bat e in
Clas
bH te
m
ion am 5n
Gm -Ech
Mad
ch lden r Radiatinto bemW, 63
os
e
fe
<1
B
se
La t star -03
ert Lein
07
no
Rob0745
do 5-1:20
82
D-7
C 60
7
IE
12
5
10
4
6
11
14
12
13
15
l
na
sio
fes
Pro
GLL 2
Professional
1 609 929 W91 | (20.5.10)
Bosch Power Tools
OBJ_BUCH-1236-001.book Page 5 Thursday, May 20, 2010 12:18 PM
5|
A
B
C
D
E
F
16
2 607 990 031
BT 350
0 601 015 B00
17
2 607 002 195
18
BS 150
0 601 096 974
1 609 929 W91 | (20.5.10)
Bosch Power Tools
OBJ_BUCH-1236-001.book Page 14 Thursday, May 20, 2010 12:18 PM
14 | English
Safety Notes
en
Cross-line Laser
Working safely with the measuring
tool is possible only when the
operating and safety information
are read completely and the instructions contained therein are
strictly followed. Never make warning labels
on the measuring tool unrecognisable. SAVE
THESE INSTRUCTIONS.
f Caution – The use of other operating or
adjusting equipment or the application of
other processing methods than those mentioned here, can lead to dangerous
radiation exposure.
f The measuring tool is provided with a warning label in English (marked with number 4
in the representation of the measuring tool
on the graphics page).
f Do not direct the laser beam at persons or
animals and do not stare into the laser
beam yourself. This measuring tool produces laser class 2 laser radiation according to
IEC 60825-1. This can lead to persons being
blinded.
f Do not use the laser viewing glasses as safety goggles. The laser viewing glasses are
used for improved visualisation of the laser
beam, but they do not protect against laser
radiation.
f Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of
the measuring tool is maintained.
f Do not allow children to use the laser measuring tool without supervision. They could
unintentionally blind other persons or themselves.
f Do not operate the measuring tool in explosive environments, such as in the presence
of flammable liquids, gases or dusts. Sparks
can be created in the measuring tool which
may ignite the dust or fumes.
Holder
Keep the holder 8 away from
cardiac pacemakers. The magnets 12 generate a field that can
impair the function of cardiac
pacemakers.
f Keep the holder 8 away from magnetic data
medium and magnetically-sensitive equipment. The effect of the magnets 12 can lead
to irreversible data loss.
Functional Description
Please unfold the fold-out page with the representation of the measuring tool and leave it unfolded while reading the operating instructions.
Intended Use
The measuring tool is intended for determining
and checking horizontal and vertical lines.
f Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glasses do not afford complete UV protection and
reduce colour perception.
1 609 929 W91 | (20.5.10)
Bosch Power Tools
OBJ_BUCH-1236-001.book Page 15 Thursday, May 20, 2010 12:18 PM
English | 15
Technical Data
Cross-line Laser
GLL 2
Professional
3 601 K63 700
Article number
Working range, min.
1)
10 m
±0.3 mm/m
Levelling Accuracy
±4°
Self-levelling range, typically
<4 s
Levelling duration, typically
Operating temperature
–10 °C ... +50 °C
Storage temperature
–20 °C ... +70 °C
90 %
Relative air humidity, max.
Laser class
2
Laser type
635 nm, <1 mW
1
C6
Tripod mount
– Cross-line Laser
– Holder
1/4"
1/4"; 5/8"
3 x 1.5 V LR06 (AA)
Batteries
15 h
Operating life time, approx.
Automatic switch-off after approx.
30 min
Weight according to EPTA-Procedure 01/2003
0.25 kg
80 x 42 x 96 mm
Dimensions
Degree of protection
IP 5X (dust protected)
1) The working range can be decreased by unfavourable environmental conditions (e.g. direct sun irradiation).
Please observe the article number on the type plate of your measuring tool. The trade names of the individual measuring tools may vary.
The measuring tool can be clearly identified with the serial number 5 on the type plate.
Product Features
The numbering of the product features shown
refers to the illustration of the measuring tool
on the graphic page.
1
2
3
4
5
6
7
8
Exit opening for laser beam
Tripod mount 1/4"
On/Off switch
Laser warning label
Serial number
Latch of battery lid
Battery lid
Holder
Bosch Power Tools
9 Locking screw for holder
10 Screw holes of holder
11 Opening for strap attachment
12 Magnets
13 1/4" tripod mount on holder
14 5/8" tripod mount on holder
15 Protective pouch
16 Laser viewing glasses*
17 Measuring plate with stand*
18 Tripod*
* The accessories illustrated or described are not included as standard delivery.
1 609 929 W91 | (20.5.10)
OBJ_BUCH-1236-001.book Page 16 Thursday, May 20, 2010 12:18 PM
16 | English
Assembly
Inserting/Replacing the Battery
Alkali-manganese batteries are recommended
for the measuring tool.
To open the battery lid 7, press the latch of the
battery lid 6 in the direction of the arrow and remove the battery lid. Insert the supplied batteries. When inserting, pay attention to the correct
polarity according to the representation on the
inside of the battery compartment.
When the batteries become weak, the laser
beams flash rapidly for about 5 s (while the
measuring tool is switched on).
Always replace all batteries at the same time.
Only use batteries from one brand and with the
identical capacity.
f Remove the batteries from the measuring
tool when not using it for extended periods.
When storing for extended periods, the batteries can corrode and discharge themselves.
Operation
Initial Operation
f Protect the measuring tool against moisture and direct sun light.
f Do not subject the measuring tool to extreme temperatures or variations in temperature. As an example, do not leave it in
vehicles for longer periods. In case of large
variations in temperature, allow the measuring tool to adjust to the ambient temperature
before putting it into operation. In case of extreme temperatures or variations in temperature, the accuracy of the measuring tool can
be impaired.
f Avoid heavy impact or falling of the measuring tool. After heavy exterior impact on the
measuring tool, an accuracy check should
always be carried out before continuing to
work (see “Levelling Accuracy”).
f Switch the measuring tool off during transport. When switching off, the levelling unit,
which can be damaged in case of intense
movement, is locked.
1 609 929 W91 | (20.5.10)
Switching On and Off
To switch on the measuring tool, push the
On/Off switch 3 to the “On” position. Immediately after switching on, the measuring tool
sends two laser beams out of the exit opening 1.
f Do not point the laser beam at persons or
animals and do not look into the laser beam
yourself, not even from a large distance.
To switch off the measuring tool, slide the
On/Off switch 3 to the “Off” position. When
switching off, the levelling unit is locked.
f Do not leave the switched on measuring
tool unattended and switch the measuring
tool off after use. Other persons could be
blinded by the laser beam.
The measuring tool switches off automatically
after an operating duration of 30 minutes.
Working with Automatic Levelling
Position the measuring tool on a level and
firm support, attach it to the holder 8 or to the
tripod 18.
After switching on, the levelling function automatically compensates irregularities within the
self-levelling range of ±4°. The levelling is finished as soon as the laser beams do not move
any more.
If the automatic levelling function is not possible, e.g. because the surface on which the
measuring tool stands deviates by more than 4°
from the horizontal plane, the laser beams flash
slowly. In this case, bring the measuring tool to
the level position and wait for the self-levelling
to take place. As soon as the measuring tool is
within the self-levelling range of ±4°, the laser
lines light up continuously again.
In case of ground vibrations or position changes
during operation, the measuring tool is automatically levelled in again. To avoid errors, check
the position of the horizontal and vertical laser
line with regard to the reference points upon relevelling.
Bosch Power Tools
OBJ_BUCH-1236-001.book Page 17 Thursday, May 20, 2010 12:18 PM
English | 17
Levelling Accuracy
A
Influences on Accuracy
The ambient temperature has the greatest influence. Especially temperature differences occurring from the ground upward can divert the laser
beam.
As thermal fluctuation is largest close to the
ground, the measuring tool, if possible, should
be mounted on a commercially available tripod
and placed in the centre of the working area.
Apart from exterior influences, device-specific
influences (such as heavy impact or falling
down) can lead to deviations. Therefore, check
the accuracy of the measuring tool each time before starting your work.
First, check both the height as well as the levelling accuracy of the horizontal laser line, then
the levelling accuracy of the vertical laser line.
B
180°
– Turn the measuring tool by 180°, allow it to
level in and mark the cross point of the laser
lines on the opposite wall B (point II).
– Without turning the measuring tool, position
it close to wall B. Switch the measuring tool
on and allow it to level in.
A
B
Should the measuring tool exceed the maximum
deviation during one of the tests, please have it
repaired by a Bosch after-sales service.
Checking the Height Accuracy of the
Horizontal Line
For this check, a free measuring distance of
5 metres on a firm surface between two walls A
and B is required.
– Mount the measuring tool onto the holder or
a tripod, or place it on a firm and level surface close to wall A. Switch the measuring
tool on.
A
– Align the height of the measuring tool (using
a tripod or by underlaying, if required) in
such a manner that the cross point of the
laser lines is projected against the previously
marked point II on the wall B.
B
5m
– Direct the laser against the close wall A and
allow the measuring tool to level in. Mark the
centre of the point where the laser lines
cross each other on the wall (point I).
Bosch Power Tools
1 609 929 W91 | (20.5.10)
OBJ_BUCH-1236-001.book Page 18 Thursday, May 20, 2010 12:18 PM
18 | English
A
B
180°
– At a distance of 2.5 metres from the measuring tool, mark the centre of the laser line
(point I on wall A and point II on wall B) on
both walls.
d
– Without changing the height, turn around the
measuring tool by 180°. Direct it against the
wall A in such a manner that the vertical laser
line runs through the already marked point I.
Allow the measuring tool to level in and mark
the cross point of the laser lines on the wall
A (point III).
– The difference d of both marked points I and
III on wall A indicates the actual height deviation of the measuring tool.
The maximum permitted deviation dmax is calculated as follows:
dmax = double distance of the walls x 0.3 mm/m
Example: With a 5 metre distance between the
walls, the maximum deviation must not exceed
dmax = 2 x 5 m x 0.3 mm/m = 3 mm. Thus, the
marks must not be more than 3 mm apart.
Checking the Levelling Accuracy of the
Horizontal Line
For the check, a free surface of approx. 5 x 5 metres is required.
– Mount the measuring tool between both
walls A and B onto the holder or a tripod, or
place it on a firm and level surface. Allow the
measuring tool to level in.
d
A
5,0
m
2,5
m
B
– Set up the measuring tool 5 metres away
turned by 180° and allow it to level in.
– Align the height of the measuring tool (using
a tripod or by underlaying, if required) in
such a manner that the centre of the laser
line is projected exactly against the previously marked point II on wall B.
– Mark the centre of the laser line as point III
(vertically above or below point I) on the wall
A.
– The difference d of both marked points I and
III on wall A indicates the actual deviation of
the measuring tool from the level plane.
The maximum permitted deviation dmax is calculated as follows:
dmax = double distance of the walls x 0.3 mm/m
Example: With a 5 metre distance between the
walls, the maximum deviation must not exceed
dmax = 2 x 5 m x 0.3 mm/m = 3 mm. Thus, the
marks must not be more than 3 mm apart.
A
2,5
1 609 929 W91 | (20.5.10)
m
5,0
m
B
Bosch Power Tools
OBJ_BUCH-1236-001.book Page 19 Thursday, May 20, 2010 12:18 PM
English | 19
Checking the Levelling Accuracy of the
Vertical Line
For this check, a door opening is required with
at least 2.5 metres of space (on a firm surface)
to each side of the door.
– The difference d between point III and the
centre of the laser line at the upper edge of the
door opening results in the actual deviation of
the measuring tool from the vertical plane.
– Measure the height of the door opening.
– Position the measuring tool on a firm, level
surface (not on a tripod) 2.5 m away from
the door opening. Direct the laser beams at
the door opening and allow the measuring
tool to level in.
The maximum permitted deviation dmax is calculated as follows:
dmax = double height of the door opening
x 0.3 mm/m
Example: With a door opening height of 2 metres, the maximum permitted deviation is
dmax = 2 x 2 m x 0.3 mm/m = 1.2 mm. Thus, the
marks must not be more than 1.2 mm apart.
2
,5
m
2
,5
m
Working Advice
– Mark the centre of the vertical laser line at
the floor of the door opening (point I), at a
distance of 5 metres beyond the other side of
the door opening (point II) and at the upper
edge of the door opening (point III).
d
2m
– Position the measuring tool on the other side
of the door opening directly behind point II.
Allow the measuring tool to level in and align
the vertical laser line in such a manner that its
centre runs exactly throught points I and II.
Bosch Power Tools
f Always use the centre of the laser line for
marking. The width of the laser line changes
with the distance.
Attaching with the Holder
To fasten the measuring tool on the holder 8,
screw the locking screw 9 of the holder into the
1/4" tripod mount 2 on the measuring tool and
tighten. To rotate the measuring tool on the
holder, slightly loosen the screw 9.
With the holder 8, the measuring tool can be attached as follows:
– Mount the holder 8 to the tripod 18 or a commercially available camera tripod via the 1/4"
tripod mount 13. For fastening to a commercially available construction tripod, use the
5/8" tripod mount 14.
– The holder 8 can be fastened to steel parts
via the magnets 12.
– The holder 8 can be fastened to drywalls or
wood walls with screws. For this, insert
screws with a minimum length of 50 mm into
the screw holes 10 of the holder.
– The holder 8 can also be fastened to pipes or
similar beams using a commercially available
strap by threading it through the opening 11
for strap attachment.
Working with the Tripod (Accessory)
A tripod offers a stable, height-adjustable measuring support. Place the measuring tool via the
tripod mount 2 onto the 1/4" male thread of the
tripod and screw the locking screw of the tripod
tight.
1 609 929 W91 | (20.5.10)
OBJ_BUCH-1236-001.book Page 20 Thursday, May 20, 2010 12:18 PM
20 | English
Working with the Measuring Plate (Accessory)
(see figures A–B)
With the measuring plate 17, it is possible to
project the laser mark onto the floor or the laser
height onto a wall.
With the zero field and the scale, the offset or
drop to the required height can be measured
and projected at another location. This eliminates the necessity of precisely adjusting the
measuring tool to the height to be projected.
The measuring plate 17 has a reflective coating
that enhances the visibility of the laser beam at
greater distances or in intense sunlight. The
brightness intensification can be seen only
when viewing, parallel to the laser beam, onto
the measuring plate.
Laser Viewing Glasses (Accessory)
The laser viewing glasses filter out the ambient
light. This makes the red light of the laser appear brighter for the eyes.
f Do not use the laser viewing glasses as safety goggles. The laser viewing glasses are
used for improved visualisation of the laser
beam, but they do not protect against laser
radiation.
f Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glasses do not afford complete UV protection and
reduce colour perception.
Work Examples (see figures C–E)
Applicational examples for the measuring tool
can be found on the graphics pages.
Maintenance and Service
Maintenance and Cleaning
Store and transport the measuring tool only in
the supplied protective pouch.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or
other fluids.
Wipe off debris using a moist and soft cloth. Do
not use any cleaning agents or solvents.
1 609 929 W91 | (20.5.10)
Regularly clean the surfaces at the exit opening
of the laser in particular, and pay attention to
any fluff of fibres.
If the measuring tool should fail despite the care
taken in manufacturing and testing procedures,
repair should be carried out by an authorised after-sales service centre for Bosch power tools.
Do not open the measuring tool yourself.
In all correspondence and spare parts orders,
please always include the 10-digit article number
given on the type plate of the measuring tool.
In case of repairs, send in the measuring tool
packed in its protective pouch 15.
After-sales Service and Customer
Assistance
Our after-sales service responds to your questions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be found
under:
www.bosch-pt.com
Our customer service representatives can answer
your questions concerning possible applications
and adjustment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Bosch Power Tools
OBJ_BUCH-1236-001.book Page 21 Thursday, May 20, 2010 12:18 PM
English | 21
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: +27 (021) 5 51 25 77
Fax: +27 (021) 5 51 32 23
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: +27 (011) 6 51 96 00
Fax: +27 (011) 6 51 98 80
E-Mail: rbsa-hq.pts@za.bosch.com
Bosch Power Tools
People’s Republic of China
Website: www.bosch-pt.com.cn
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 800 8 20 84 84
Tel.: +86 (571) 87 77 43 38
Fax: +86 (571) 87 77 45 02
HK and Macau Special Administrative Regions
Robert Bosch Hong Kong Co. Ltd.
21st Floor, 625 King’s Road
North Point, Hong Kong
Customer Service Hotline: +852 (21) 02 02 35
Fax: +852 (25) 90 97 62
E-Mail: info@hk.bosch.com
www.bosch-pt.com.cn
Indonesia
PT. Multi Tehaka
Kawasan Industri Pulogadung
Jalan Rawa Gelam III No. 2
Jakarta 13930
Indonesia
Tel.: +62 (21) 46 83 25 22
Fax: +62 (21) 46 82 86 45/68 23
E-Mail: sales@multitehaka.co.id
www.multitehaka.co.id
Philippines
Robert Bosch, Inc.
28th Floor Fort Legend Towers,
3rd Avenue corner 31st Street,
Fort Bonifacio Global City,
1634 Taguig City, Philippines
Tel.: +63 (2) 870 3871
Fax: +63 (2) 870 3870
matheus.contiero@ph.bosch.com
www.bosch-pt.com.ph
Bosch Service Center:
9725-27 Kamagong Street
San Antonio Village
Makati City, Philippines
Tel.: +63 (2) 899 9091
Fax: +63 (2) 897 6432
rosalie.dagdagan@ph.bosch.com
1 609 929 W91 | (20.5.10)
OBJ_BUCH-1236-001.book Page 22 Thursday, May 20, 2010 12:18 PM
22 | English
Malaysia
Robert Bosch (S.E.A.) Pte. Ltd.
No. 8A, Jalan 13/6
G.P.O. Box 10818
46200 Petaling Jaya
Selangor, Malaysia
Tel.: +60 (3) 7966 3194
Fax: +60 (3) 7958 3838
cheehoe.on@my.bosch.com
Toll-Free: 1800 880 188
www.bosch-pt.com.my
Thailand
Robert Bosch Ltd.
Liberty Square Building
No. 287, 11 Floor
Silom Road, Bangrak
Bangkok 10500
Tel.: +66 (2) 6 31 18 79 – 18 88 (10 lines)
Fax: +66 (2) 2 38 47 83
Robert Bosch Ltd., P. O. Box 2054
Bangkok 10501, Thailand
Bosch Service – Training Centre
2869-2869/1 Soi Ban Kluay
Rama IV Road (near old Paknam Railway)
Prakanong District
10110 Bangkok
Thailand
Tel.: +66 (2) 6 71 78 00 – 4
Fax: +66 (2) 2 49 42 96
Fax: +66 (2) 2 49 52 99
Singapore
Robert Bosch (SEA) Pte. Ltd.
11 Bishan Street 21
Singapore 573943
Tel.: +65 6571 2772
Fax: +65 6350 5315
leongheng.leow@sg.bosch.com
Toll-Free: 1800 333 8333
www.bosch-pt.com.sg
Vietnam
Robert Bosch Vietnam Co. Ltd
10/F, 194 Golden Building
473 Dien Bien Phu Street
Ward 25, Binh Thanh District
84 Ho Chi Minh City
Vietnam
Tel.: +84 (8) 6258 3690 ext. 413
Fax: +84 (8) 6258 3692
hieu.lagia@vn.bosch.com
www.bosch-pt.com
1 609 929 W91 | (20.5.10)
Disposal
Measuring tools, accessories and packaging
should be sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of measuring tools
into household waste!
According the European Guideline
2002/96/EC for Waste Electrical
and Electronic Equipment and its
implementation into national
right, measuring tools that are no longer usable
must be collected separately and disposed of in
an environmentally correct manner.
Battery packs/batteries:
Do not dispose of battery packs/batteries into
household waste, fire or water. Battery packs/
batteries should, if possible, be discharged, collected, recycled or disposed of in an environmental-friendly manner.
Only for EC countries:
Defective or dead out battery packs/batteries
must be recycled according the guideline
2006/66/EC.
Batteries no longer suitable for use can be
directly returned at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Subject to change without notice.
Bosch Power Tools