HT-F450K
HT-F453K
HT-F453HK
HT-F445K
HT-F455K
Digital Home
Entertainment System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
HT-F450-ENG MIC-12-12.indd 1
2013-2-18 13:49:11
Safety Information
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous
voltage” inside the product that
presents a risk of electric shock or
personal injury.
CAUTION: TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT, FULLY
INSERT.
WARNING
• To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION
• Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
• The Mains plug is used as a disconnect device and
shall stay readily operable at any time.
• This apparatus shall always be connected to an AC
outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug
must be pulled out from the mains socket, therefore
the mains plug shall be readily operable.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
PRODUCTO
This symbol indicates important
instructions accompanying the
product.
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION
• INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO
BEAM.
| 2 English
HT-F450-ENG MIC-12-12.indd 2
2013-2-18 13:50:14
Disc Storage & Management
- Avoid touching the surface of a disc where data has
been recorded.
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
- Hold the disc by the edges so that fingerprints will
not get on the surface.
- Do not stick paper or tape on the
disc.
• Cleaning Discs
- If you get fingerprints or dirt on a disc,
clean it with a mild detergent diluted
in water and wipe with a soft cloth.
- When cleaning, wipe gently from the inside to the
outside of the disc.
- Disc Storage
 Do not keep in direct sunlight.
 Keep in a cool ventilated area.
 Keep in a clean protection jacket and store
vertically.
Licence
Safety Information
- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
01
• Holding Discs
• HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
• This item incorporates copy protection technology
that is protected by U.S. patents and other intellectual
property rights of Rovi Corporation. Reverse
engineering and disassembly are prohibited.
• This product uses some software programs which are
distributed under the Independent JPEG Group.
• This product uses some software programs which are
distributed under the OpenSSL Project.
Copyright
© 2013 Samsung Electronics Co., Ltd. All rights reserved.
Copy Protection
• ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX,LLC,a subsidiary of Rovi Corporation.
This is an official DivX Certified® device that plays DivX
video. Visit divx.com for more information and software
tools to convert your files into DivX videos.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To
obtain your registration code, locate the DivX VOD
section in your device setup menu. Go to vod.divx.
com for more information on how to complete your
registration.
• DivX Certified® to play DivX® video, including premium
content.
• DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries and
are used under license.
• Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274.
Many DVD discs are encoded with copy protection.
Because of this, you should only connect your product
directly to your TV, not to a VCR. Connecting to a VCR
results in a distorted picture from copy-protected DVD
discs.
English
HT-F450-ENG MIC-12-12.indd 3
3|
2013-2-18 13:50:16
Contents
SAFETY INFORMATION
2
3
3
3
Safety Warnings
Disc Storage & Management
Licence
Copyright
3
Copy Protection
18
18
18
18
18
18
18
BASIC FUNCTIONS
GETTING STARTED
5
6
6
7
7
8
Disk and Format Compatibility
Notes on the USB connection
Accessories
Front Panel
Rear Panel
Remote control
CONNECTIONS
10
13
14
15
Connecting the Speakers
Connecting to a TV
Connecting to External Devices
Connecting Microphone
SETTINGS
16
16
16
16
16
17
17
17
17
17
17
17
17
17
18
18
18
18
18
18
The Initial Settings Procedure
Accessing the Settings Screen
Display
TV Aspect
BD Wise
Resolution
HDMI Format
Video Out Signal(option)
Audio
Simple Setup
Speaker Setting
DRC (Dynamic Range Compression)
AUDIO SYNC
Speaker Selection
User EQ
Karaoke Scoring
Audio Return Ch.
System
Initial Settings
DivX(R) Registration
DivX(R) Deactivation
Language
Security
Parental Rating
Change Password
Support
Product Information
19
19
19
19
21
22
23
23
Disc Playback
Audio CD(CD-DA)/MP3/WMA Playback
JPEG File Playback
Using the Playback Function
Using the Special Remote Control
Buttons
Listening to Radio
USB Function
USB Recording
OTHER INFORMATION
24
25
27


Troubleshooting
Specifications
OpenSSL License
Figures and illustrations in this User Manual
are provided for reference only and may differ
from actual product appearance.
An administration fee may be charged if either
a. an engineer is called out at your request and
there is no defect in the product (i.e. where
you have failed to read this user manual)
b. you bring the unit to a repair centre and
there is no defect in the product (i.e. where
you have failed to read this user manual).

The amount of such administration charge will
be advised to you before any work or home
visit is carried out.
| 4 English
HT-F450-ENG MIC-12-12.indd 4
2013-2-18 13:50:19
Getting Started
Disk and Format Compatibility
Bit Rate
MP3
80~320kbps
Sampling
Frequency
Getting Started
Format
02
Disc types and contents your product
can play
Music File Support
44.1khz
Media
VIDEO
Term
Disc Type
WMA
56~128kbps
DVD
DVD-Video or DVD±R/±RW
discs
AC3
128~384kbps
CD
Data CD (CD DA, CD-R/RW)
DivX
DVD±R/±RW, CD-R/-RW
MUSIC
MP3
CD-R/-RW
PHOTO
JPEG
CD-R/-RW
Disc types your product cannot play
• LD, CD-G/-I/-ROM, DVD-ROM/-RAM
| NOTE |
DVD discs purchased abroad may not play on this
product.
This product may not respond to all operating
commands because some DVD, and CD discs allow
specific or limited operation and provide only certain
features during playback. Please note that this is not a
defect in the product.
Samsung cannot guarantee that this product will play
every disc bearing the DVD or CD logo because disc
formats evolve, and problems and errors may occur
during the creation of DVD, and CD software and/or
the manufacture of discs.
Please contact the SAMSUNG Customer Care Centre,
if you have questions or encounter difficulty when
playing DVD, or CD discs in this product. Also, refer to
rest of this user manual for additional information on
playback restrictions.
Some commercial discs and DVD discs purchased
outside your region may not play on this product.
This product does not support DTS sound.
44.1/48khz
• Aspect Ratio : This product supports up to 720x576
pixels. TV screen resolutions higher than 800 will not
be supported.
• When you play a disc whose sampling frequency is
higher than 48khz or 320kbps, you may experience
shaking on the screen during playback.
• Sections with a high frame rate might not be played
while playing a DivX file.
• Since this product only provides encoding formats
authorized by DivX Networks, Inc., a DivX file created
by the user might not play.
Logos of Discs the product can play
DVD-VIDEO
AUDIO-CD
DivX
Region Code
Both products and discs are coded by region. These
regional codes must match for a disc to play. If the codes
do not match, the disc will not play. The Region Number
for this product is displayed on the rear panel of the
product.
Supported Formats
Video File Support
Format
Supported Versions
AVI
DivX3.11~DivX6.8
WMV
V1/V2/V3/V7
English
HT-F450-ENG MIC-12-12.indd 5
5|
2013-2-18 13:50:21
Getting Started
Disc Type
Region
Code
Area
1
The U.S., U.S. territories and
Canada
2
Europe, Japan, the Middle
East, Egypt, Africa, Greenland
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
DVD-VIDEO
5
Russia, Eastern Europe, India,
North Korea, Mongolia
• The maximum current supported by the USB port for
an external device is 500 mA (at 5V DC).
• Supported file formats
Format
Still
Picture
File name
JPG
MP3
WMA
WMV
DivX
File
extension
JPG .JPEG
.MP3
.WMA
.WMV
.AVI
Bit rate
–
80~320
kbps
56~128
kbps
4Mbps
4Mbps
Version
–
–
V8
V1,V2,
V3,V7
DivX3.11~
DivX6.8
Pixel
640x480
–
–
720x576
Sampling
Frequency
–
44.1kHz
44.1kHz
44.1KHz~ 48KHz
Music
Movie
| NOTE |
6
Playing back a JPEG file whose image resolution is
China
higher than that of DVD may result in degraded image
quality when displayed.
| NOTE |
If the Region number of a DVDs does not correspond
to the Region number of this product, the product
cannot play the disc.
Accessories
Check for the supplied accessories below.
Notes on the USB connection
• Supported devices: USB storage media, MP3 player,
digital camera
• If a folder or file name is longer than 10 characters, it
may not properly display or operate.
• A subtitle file bigger than 300KB may not be properly
displayed.
• A certain USB/digital camera device, USB card reader
is not supported.
• FAT16 and FAT32 file systems are supported.
• Connect directly to the product's USB port.
Connecting through another cable may raise problems
with USB compatibility.
• Inserting more than one memory device to a multi-card
reader may not operate properly.
• PTP protocol for digital camera is not supported.
• Do not disconnect USB device during a "Reading"
process.
• Bigger the image resolution, the longer the delay
to displaying.DRM applied MP3/WMA or video files
downloaded from a commercial site are not played
back.
• External HDD device is not supported.
Video Cable
FM Cable
FUNCTION
TV
SOURCE
RECEIVER
FOOTBALL
DVD
TV
2
1
4
5
7
8
3
6
9
V-SURROUND
DSP/EQ
0
MUTE
MIC VOL +
VOL
TV SOUND
TUNING
/ CH
MIC VOL
DISC MENU
HOME
TITLE MENU
TOOLS
INFO
b
#
EXIT
RETURN
USB REC S/W LEVEL
A
B
DIMMER
C
D
S.VOL
P.BASS
GIGA
User manual
SLEEP
TUNER
MEMORY
ECHO
KEYCON
MY KARAOKE REPEAT
MO/ST
Remote Control/Batteries
(AAA size)
HDMI Cable(option)
| 6 English
HT-F450-ENG MIC-12-12.indd 6
2013-2-18 13:50:25
Front Panel
DISPLAY
OPEN/CLOSE (
)
PLAY/PAUSE (
,
)
)
5V 500mA
MIC 1
AUX IN 1
) VOLUME CONTROL (
Getting Started
* AUX IN 1
CONNECTOR
STOP (
02
DISC TRAY
MIC 2
MIC JACKS
) REMOTE CONTROL
SENSOR
USB HOST FUNCTION (
POWER (
)
* Connecting Audio from External Components
Connect an Audio cable (not supplied) from the AUX IN 1 jack on the front of the product to the Audio Out jack on
your MP3 player.  Select the AUX 1 mode.
Rear Panel
SPEAKER OUTPUT
CONNECTORS
FA NET
(Only for Service)
EXTERNAL DIGITAL
AUDIO IN (OPTICAL)
AUX IN 2
VIDEO OUT
COOLING FAN
SPEAKERS OUT
AUX IN 2
VIDEO
OUT
* FM ANTENNA
HDMI OUT
FM ANT
FA NET
HDMI OUT
(Only For Service)
OPTICAL
SURROUND
SUBWOOFER
SURROUND
DIGITAL
AUDIO IN
* Connecting the FM Antenna
1 . Connect the FM antenna supplied to the FM ANTENNA Jack.
2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or
other rigid surface.
| NOTE |
Ensure a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation. Do not
obstruct the cooling fan or ventilation holes.
This product does not receive AM broadcasts.
English
HT-F450-ENG MIC-12-12.indd 7
7|
2013-2-18 13:50:39
Getting Started
Remote Control
Tour of the Remote Control
FUNCTION
TV
SOURCE
Turn the product on and off.
If you want to change to TV mode,
press the TV button.
If you want to change to Home
Theater, press the DVD button.
Press numeric buttons to operate
options.
RECEIVER
FOOTBALL
DVD
TV
To open and close the disc tray.
1
2
3
4
5
6
7
8
9
V-SURROUND
DSP/EQ
Press Virtual Surround to select On/
Off.
Select the desired DSP/EQ audio
mode.
0
Press to search backwards or
forwards.
Press to skip backwards or
forwards.
Press to stop/play a disc.
Press to pause a disc.
Cut off the sound temporarily.
MUTE
MIC VOL +
Adjust the volume.
VOL
TV SOUND
TUNING
/ CH
MIC VOL
Brings up the product's setup menu.
DISC MENU
HOME
TITLE MENU
Press to check the disc menu.
Used to change the audio/subtitle
language, angle etc.
TOOLS
Select on-screen menu items and
change menu value.or
Press the Key Control(# ,b) to
decrease or increase the key value.
b
Return to the previous menu.
Allow access to common functions
of the DVD Home Theater such as
navigating the Photo List.
INFO
EXIT
RETURN
USB REC S/W LEVEL
A
Adjust the echo level of the microphone.
Press to preset FM stations.
or
Press KEYCON button to Select the
Key Control bar.
Search for active FM stations and
change channels.
or
Adjust the microphone's volume.
Audio signal can output to Home
Theater Speaker or TV Speaker.
Use this to enter the Title menu.
Display current disc(file) status.
#
B
DIMMER
Adjust the brightness of Display.
Used to turn on/off GIGA Sound
function.
Set a Sleep time to shut off the
Product. or
This is mode selection button.
or
Press to select TV's video mode.
To select the football mode.
C
D
S.VOL
P.BASS
GIGA
SLEEP
TUNER
MEMORY
ECHO
KEYCON
MY KARAOKE REPEAT
Press this to exit the menu.
Used to start USB recording.
Used to adjust the level of the
subwoofer.
Select the desired P.BASS.
Regulate and stabilize the volume
level against a drastic volume change.
MO/ST
Allows you to repeat a title, chapter,
track or disc.
Select MONO or STEREO for radio
broadcasting.
or
Voice remover.
| 8 English
HT-F450-ENG MIC-12-12.indd 8
2013-2-18 13:50:44
Installing batteries in the Remote
Control
TV Control Codes
Brand
Brand
56, 57, 58
MTC
18
01, 15
01, 02, 03, 04, 05, 06,
07, 08, 09, 10, 11, 12,
13, 14
01, 18, 40, 48
NEC
18, 19, 20, 40, 59, 60
Nikei
03
Onking
03
57, 58, 81
Onwa
03
Brocsonic
59, 60
Panasonic
Penney
Anam
AOC
Bell & Howell
(M.Wards)
Craig
03, 05, 61, 82, 83, 84
RCA/Proscan
Croslex
Crown
62
03
Realistic
Sampo
Curtis Mates
59, 61, 63
Samsung
CXC
Sanyo
Scott
03, 40, 60, 61
Sears
Sharp
Signature 2000
(M.Wards)
Sony
Soundesign
Spectricon
15, 18, 19
15, 57, 64
Fisher
Funai
Futuretech
General Electric
(GE)
Hall Mark
Hitachi
Inkel
JC Penny
JVC
KTV
KEC
KMC
03
02, 03, 04, 15, 16, 17,
18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29,
30, 32, 34, 35, 36, 48,
59, 90
40
03
03, 15, 40, 46, 59, 61,
64, 82, 83, 84, 85
19, 65
03
03
06, 40, 56, 59, 66, 67,
68
40
15, 18, 50, 59, 69
45
56, 59, 67, 86
70
59, 61, 87, 88
03, 15, 40
15
06, 07, 08, 09, 54, 66,
67, 73, 74
18
03, 15, 17, 18, 48, 54,
59, 62, 69, 90
15, 17, 18, 40, 48, 54,
62, 72
63, 66, 80, 91
15, 18, 59
40
06, 66, 67
17, 48, 56, 60, 61, 75
18, 59, 67, 76, 77, 78,
92, 93, 94
03, 19
40
00, 15, 16, 17, 40, 43,
46, 47, 48, 49,
19, 61, 65
LG (Goldstar)
01, 15, 16, 17, 37, 38,
39, 40, 41, 42, 43, 44
Candle
18
Cetronic
03
Philco
Citizen
03, 18, 25
Philips
Cinema
Classic
Concerto
Contec
Coronado
97
03
18
46
15
Pioneer
Portland
Proton
Quasar
Radio Shack
| NOTE |
Make sure to match the “+” and “–” ends of the
batteries with the diagram inside the compartment.
Assuming typical TV usage, the batteries last for about
one year.
The remote control can be used up to approximately
7 meters from the product in a straight line.
Setting the Remote Control
You can control certain functions of your TV with this
remote control.
When operating a TV with the remote control
1 . Press the TV button to set the remote control to TV
Daewoo
mode.
2 . Press the POWER button to turn on the TV.
3 . While holding down the POWER button, enter the
code corresponding to your brand of TV.
• If there is more than one code listed for your TV in
the table, enter one at a time to determine which
code works.
• Example : For a Samsung TV
While holding down the POWER button, use the
number buttons to enter 00, 15, 16, 17 and 40.
4 . If the TV turns off, the setting is complete.
• You can use the TV POWER, VOLUME,
CHANNEL, and Numeric buttons (0~9).
| NOTE |
The remote control may not work or some operations
may not be possible with some brands of TVs.
The remote control will work on a Samsung TV by
default.
Daytron
Dynasty
Emerson
57, 58
50, 51, 52, 53, 55
03, 40
01
SSS
18
Sylvania
Symphonic
Tatung
Techwood
Teknika
TMK
Toshiba
Vidtech
18, 40, 48, 54, 59, 60, 62
61, 95, 96
06
18
03, 15, 18, 25
18, 40
19, 57, 63, 71
18
Videch
59, 60, 69
Luxman
18
Wards
15, 17, 18, 40, 48, 54,
60, 64
LXI (Sears)
19, 54, 56, 59, 60, 62,
63, 65, 71
15, 17, 18, 48, 54, 59,
60, 62, 72, 89
40, 54
54
18, 40
18, 40, 59, 60, 75
Yamaha
18
York
40
Yupiteru
Zenith
Zonda
Dongyang
03
58, 79
01
03, 54
Magnavox
Marantz
Matsui
MGA
Mitsubishi/MGA
English
HT-F450-ENG MIC-12-12.indd 9
Getting Started
Battery size: AAA
Code
02
Code
Admiral
(M.Wards)
A Mark
9|
2013-2-18 13:50:52
Connections
This section involves various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Simple speaker's position :
Normal speaker's position :
Subwoofer
Centre
Subwoofer
Front (R)
Product
Surround (R)
Front (L)
Surround (R)
Front (L)
Centre
Product
Front (R)
Surround (L)
Surround (L)
Position of the product
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
Example : For 32" TV's 2~2.4m
For 55" TV's 3.5~4m
Front Speakers
Place these speakers in front of your listening position, facing inwards (about 45°) toward
you. Place the speakers so that their tweeters will be at the same height as your ear. Align
the front face of the front speakers with the front face of the center speaker or place them
slightly in front of the center speakers.
Centre Speaker
It is best to install it at the same height as the front speakers. You can also install it directly
over or under the TV.
Surround
Speakers
Place these speakers to the side of your listening position. If there isn't enough room, place
these speakers so they face each other. Place them about 60 to 90cm above your ear,
facing slightly downward.
* Unlike the front and center speakers, the surround speakers are used to handle mainly
sound effects and sound will not come from them all the time.
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
| CAUTION |
Do not let children play with or near the speakers. They could get hurt if the speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
Keep the subwoofer out of the reach of children so as to prevent them from inserting their hands or alien substances
into the duct (hole) of the subwoofer.
Do not hang the subwoofer on the wall through the duct (hole).
| NOTE |
If you place a speaker near your TV set, screen colour may be distorted because of the magnetic field generated by
the speaker. If this occurs, place the speaker away from your TV set.
| 10 English
HT-F450-ENG MIC-12-12.indd 10
2013-2-18 13:50:56
Speaker Components
03
(R)
FRONT
(L)
(R)
(L)
HT-F453K
(L)
SUBWOOFER
CENTER
SURROUND
(R)
HT-F455K
(L) (R)
SPEAKER CABLE
Connections
HT-F450K
(L)
(L) (R)
(R)
SURROUND
STAND BASE
FRONT
SURROUND
STAND
STAND
FRONT
SCREW (5×20): 8EA
STAND BASE
HT-F453HK
(L)
SCREW (5×20): 16EA
HT-F445K
(R)
(L) (R)
(L) (R)
(L) (R)
STAND NUT
CENTER
STAND DRIVER
SURROUND
FRONT SURROUND
CENTER
FRONT
STAND
SUBWOOFER
SPEAKER CABLE
SPEAKER CABLE
STAND BASE
SUBWOOFER
STAND BASE
SCREW (5×15): 16EA
Connecting The Speakers
1 . Press down the terminal tab on the back of the speaker.
2 . Insert the black wire into the black terminal (–) and the red wire into the
red terminal (+), and then release the tab.
3 . Connect the connecting plugs to the back of the product by matching the
Black
Red
colours of the speaker plugs to the speaker jacks.
English
HT-F450-ENG MIC-12-12.indd 11
11 |
2013-2-18 13:51:01
Connections
In case of HT-F450K
Center Speaker
Front Speaker (R)
Front Speaker (L)
VOLTAGE 115
SEL.
SPEAKERS OUT
AUX IN 2
VIDEO
OUT
FM ANT
FA NET
HDMI OUT
(Only For Service)
OPTICAL
SURROUND
SUBWOOFER
SURROUND
Surround Speaker (R)
DIGITAL
AUDIO IN
Surround Speaker (L)
Subwoofer
Installing the Speakers on the Tallboy Stand
Refer to page 11 for the speakers of
HT-F453K/F453HK/F445K/F455K.
1
Stand Base
2
* HT-F453K only - Front Speakers
* HT-F445K/F455K only - Front/Surround Speakers
1 . Turn the Stand Base upside-down and connect it to the
Stand.
Stand
2 . Use the driver to combine the screws on the 3 marked holes.
| CAUTION |
3
When you use a torque screwdriver, be careful not to put
4
Speaker
excessive force. Otherwise, it runs idle or can be damaged.
(torque screwdriver- below 15 kg.f.cm)
Stand
3 . Straighten a supplied speaker wire to the gravity direction
and put in the hole on the center of Stand Base.
4 . Connect the upper Speaker to the assembled Stand.
5 . Insert a screw clockwise into the hole on the rear of the
5
6
speaker using a screwdriver. And then connect a speaker
cable.
6 . This is the appearance after the speaker is installed.Follow
this steps to install other speaker.
| 12 English
HT-F450-ENG MIC-12-12.indd 12
2013-2-18 13:53:11
1
2
3
4
5
6
03
Installing the Speakers on the Half Tallboy
Stand
* HT-F453HK only - Front Speakers
Connections
1. Stretch out the speaker cables as shown and arrange it
through the hole of the stand base .
2. When done, use the stand driver to tighten the stand
nut as shown.
3. This is the appearance after the speaker is installed.
Follow these steps to install another speaker.
4. If you want to adjust the height of the speaker, loosen
two screws on the rear of the speaker.
5. Pull up the speaker in the arrow direction. Fit the speaker in
a height adjusting hole of your choice.
!
CAUTION : Be careful as an excessive force may result in
a physical damage.
6. Insert two screws clockwise into the hole on the rear of
the speaker using a screwdriver as shown and tighten
back 2 screws.
7. This is after the height of the speaker is adjusted.
You can repeat these steps above at any time if you
want to readjust the height.
7
Connecting to a TV
Select either Method 1 or Method 2.
• If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote
control, and then select the correct external source from the TV's source list (HDMI, Video In, etc.) to view video
from the home cinema.
Method 2
SPEAKERS OUT
AUX IN 2
VIDEO
OUT
FM ANT
HDMI OUT
OPTICAL
SURROUND
SUBWOOFER
SURROUND
DIGITAL
AUDIO IN
Method 1
Method 1 Connecting to a TV with an HDMI Cable - Best Quality (Recommended)
Connect an HDMI cable (option) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.
English
HT-F450-ENG MIC-12-12.indd 13
13 |
2013-2-18 13:53:17
Connections
Method 2 Connecting to a TV with a Video Cable - Good Quality
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack on your TV.
| NOTE |
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection
systems and the picture will be distorted on the television.
Using Anynet+(HDMI-CEC) (Samsung products only)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control.
Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable.
| NOTE |
The Anynet+ function supports some buttons of the remote control.
This function is not available if an HDMI cable does not support CEC.
Please check the Anynet+ logo (If your TV has an Anynet+ logo, then it supports Anynet+ function.)
Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the
mode changes in this order : DVD/CD D.IN AUX 1 AUX 2 USB FM
Method 1
(Cable not supplied.)
Red
R
White
W
AUX IN 2
VIDEO
OUT
FM ANT
HDMI OUT
OPTICAL
AUDIO OUT
DIGITAL
AUDIO IN
External Devices
DIGITAL OUT
Method 2
(Cable not supplied.)
Method 1 AUX 2 : Connecting an External Analog Component
Connect AUX IN 2 (Audio) on the back of the product to the Audio Out of the external Analog component.
 Select the AUX 2 mode.
| NOTE |
Be sure to match the colors of the connecting jacks.
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this
product.
If no button actions for more than 8 hours in AUX mode, the power will automatically turn off.
Method 2 OPTICAL : Connecting an External Digital Audio Component
Connect the DIGITAL AUDIO IN (OPTICAL) on the back of the product to the Digital Output of the external digital
component.  Select the D.IN mode.
If no OPTICAL signal for more than 25 minutes, the product will automatically turn off.
| 14 English
HT-F450-ENG MIC-12-12.indd 14
2013-2-18 13:53:36
Connecting Microphone
03
1.
2.
3.
4.
Connect the microphone to the MIC jack on the front of the product.You can connect up to two microphones.
Press the MIC VOL button to adjust the volume of the microphone.
Press the ECHO button to adjust the echo level of the microphone.
MIC 1
During the playback, press the KEYCON button,then press the (#/b) button.
MIC 2
Connections
You can enjoy the feeling of a karaoke bar in the comfort of your home.
Watch the video and sing along the lyrics displayed on the TV screen against the accompaniment.
Each time the (#) button is pressed, the key is increased,
and each time the (b) button is pressed, the key is decreased.
5. Press the MY KARAOKE button to suppress the Vocal.Each time the button is
pressed, the selection is changed as follows: Vocal Reduction ➞ Original vocals.
NOTE
 If you hear strange noises (squealing or howling) while using the Karaoke feature,
move the microphone away from the speakers. Turning down the microphone's
volume or the speaker volume is also effective.
✎
 The microphone does not operate in the AUX and TUNER mode.
 When Speaker Selection is set to TV Speaker, The Microphone is not
available.
 After setting my karaoke or the keycon,S.VOL/P.BASS/DSP(EQ)/GIGA/
FOOTBALL/V-SURROUND does not work.
 MY KARAOKE function doesn't work in D.IN/DIVX state,KEYCON function
doesn't work in D.IN/DIVX/USB/MP3/WMA state
b
#
TUNER
MEMORY MY KARAOKE
KEYCON
MO/ST
 After the stop operation,the setting of my karaoke and keycon will disappear.
 MY KARAOKE function can be available when the microphone is connected or not,but KEYCON function
can be available that the microphone must be connected.
English
HT-F450-ENG MIC-12-12.indd 15
15 |
2013-2-18 13:53:42
Settings
The Initial Settings Procedure
Buttons on the Remote Control Used
for the Settings Menu
Press the POWER button when it is plugged in TV for the
first time. Initial Settings screen will be displayed.
▲▼ (select the desired language)  E
 ▲▼ (select the desired TV Aspect)  E
 ▲▼ (select the simple speaker setup)  E.
1
b
Initial settings > On-Screen Language
Select a language for the on-screen displays
2
#
3
4
English
한국어
Nederlands
Français
Deutsch
Italiano
>Move
1
HOME Button : Press to move to the Home
screen.
2
RETURN Button : Return to the previous menu.
3
E (Enter) / DIRECTION Button :
• Press ▲▼◄► to move the cursor or select
an item.
• Press the E button to activate the currently
selected item or confirm a setting.
4
EXIT Button : Press to exit the current menu.
" Select
| NOTE |
The initial screen may appear different, depending on
the content of the disc.
If the HDMI cable is connected to the product, TV
aspect does not appear.
If you want to display the Initial Setting screen again
and make changes, select the Reset option.
Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the user
manual of your TV.
Accessing the Settings Screen
1 . Press the POWER button.
Settings
Display
TV Aspect
• 4:3 Pan-Scan: Select when you want to see the 16:9
video supplied by the DVD without the black bars on
top and bottom, even though you have a TV with a 4:3
ratio screen.
• 4:3 Letter Box: Select when you want to see the total
16:9 ratio screen DVD supplies, even though you have
a TV with a 4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
• 16:9 Wide: You can view the full 16:9 picture on your
widescreen TV.
BD Wise
Function
DVD/CD
2 . Press the ◄► buttons to select Settings, then
press the E button. The Settings screen appears.
3 . To access the menus, sub-menus, and options
on the Settings screen, please refer to the remote
control illustration below.
BD Wise is Samsung’s latest inter-connectivity feature.
When you connect a Samsung product and a Samsung
TV with BD Wise to each other via HDMI, and BD Wise is
on in both the product and TV, the product outputs video
at the video resolution and frame rate of the DVD Disc.
| NOTE |
This will optimize the picture quality according to the
content (In the DVD disc, etc) that you want to play
and the product or your BD Wise-compliant Samsung
TV.
| 16 English
HT-F450-ENG MIC-12-12.indd 16
2013-2-18 13:53:51
If you want to change the resolution in BD Wise mode,
Sets the output resolution of the HDMI video signal.
The i and p indicate interlace and progressive scan,
respectively.
• 576p(480p), 720p, 1080i, 1080p, BD Wise
| NOTE |
The BD Wise menu item appears only if BD Wise is
set to On.
Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the user’s
manual of your TV.
If Composite is connected, the resolution supports
only 576i(480i).
1080P may not appear depending on TV.
HDMI Format
Lets you set the colour space format for the HDMI output
to match the capabilities of the connected device (TV,
monitor).
Video Out Signal(option)
Different countries apply different TV standard.
You can select from NTSC or PAL.
Audio
Simple Setup
You can adjust the balance and level for each speaker.
Press the ▲▼ buttons to select and adjust the desired
speaker.
Press the ◄► buttons to adjust the settings.
Delay Time
If the speakers cannot be placed at equal distances from
the listening position, you can adjust the delay time of the
audio signals from the Center and Surround speakers.
You can also set the Test Tone in this mode.
| NOTE |
The Delay Time menu will be activated only when a
5.1 channel source is played.
You can not set Center and Surround in this mode
when their Speaker Size is set to NONE.
With AC-3, the delay time of surround can be set
between 00 and 15mSEC.Center only can be set
between 00 and 5mSEC.
The Center channel is only adjustable on 5.1 channel
discs.
Test Tone
Use the Test Tone feature to check the speaker
connections.
• Press the ◄► buttons to select On.
• The test tone will be sent to Front Left  Center 
Front Right  Surround Right  Surround Left 
Subwoofer in order.
To stop the test tone, press the E button.
DRC (Dynamic Range Compression)
send
It is the Function for selecting the Speaker Layout
suitable with the layout type of the connected Speaker.
That is two path to select:
1. Settings AudioSimple Setup
2. Settings SystemInitial Setting  Simple
Speaker Setup
• Normal Mode: Use this option when the surround
speakers are located behind you.
• Simple Mode: Use this option if the surround speakers
are located in front of you.
This feature balances the range between the loudest and
quietest sounds. You can use this function to enjoy Dolby
Digital sound when watching movies at low volume at
night.
If Simple Mode is selected, Speaker Setting cann't be
Speaker Selection
set.
Speaker Setting
Speaker Size
You can set the Speaker Size of the Center and Surround
Speakers, as well as Test Tone in this mode.
AUDIO SYNC
Video and audio sync may not match with digital TV. If
this occurs, adjust the audio delay time to match the
video.
• Video is transmitted over the HDMI connection cable
only, and audio is output through the product speakers
only.
 Select the Home Theater.
• Both video and audio signals are transmitted over the
HDMI connection cable, and audio is output through
your TV speakers only.
 Select the TV Speaker.
English
HT-F450-ENG MIC-12-12.indd 17
Settings
Resolution
Sound Edit
04
you must set BD wise mode to Off in advance.
BD Wise will be disabled if the product is connected
to a device that does not support BD Wise.
17 |
2013-2-18 13:54:02
Settings
DivX(R) Deactivation
| NOTE |
The default setting of this function is Home Theater .
HDMI Audio is automatically down-mixed to 2ch forTV
speakers.
User EQ
You can configure the equalizer settings manually to your
preference.
Karaoke Scoring
Karaoke score display can be toggled On or Off.
• Off : Turns off the karaoke score display.
• On : After the singing, the score is displayed on
the screen.
Select this to get a new registration code.
Language
You can select the language you prefer for on-screen
menu, disc menu, etc.
To select a language that does not appear in the
menu, select OTHERS in the Disc Menu, Audio and
Subtitle, and enter the language code of your country.
For more information, refer to www.samsung.com or
call to Samsung customer service center.
| NOTE |
| NOTE |
In D.IN/USB/DIVX/MP3/WMA state,karaoke scoring
does not work.
Repeat function is not available during CD/DVD disc is
played if karaoke scoring is set to on.
You cannot select OTHERS in the OSD Language
menu.
The selected language will only appear if it is
supported on the disc.Security
Audio Return Ch.
You can enjoy TV sound from the Home Cinema
speakers by using just one HDMI cable.
| NOTE |
When Anynet+ (HDMI-CEC) is Off, the Audio Return
Channel function is not available.
Security
The Parental Lock function works in conjunction with
DVDs that have been assigned a rating, which helps you
control the types of DVDs that your family watches. There
are up to 8 rating levels on a disc.
Using an ARC (Audio Return Channel)-uncertified
HDMI cable may cause a problem in compatibility.
ARC function is only available if an ARC-compliant TV
is connected.
ARC function is included in D.IN function on the main
set.
If no ARC signal for more than 25 minutes, the
product will automatically turn off.
System
Initial Settings
By using the Initial Settings, you can set the language ,TV
aspect and Simple Setup. (see page 16)
DivX(R) Registration
View DivX(R) VOD Registration Code to purchase and
play DivX(R) VOD content.
Parental Rating
Select the rating level you want to set. Enter the
password and then press the E button.
• The password is set to "0000" by default.
Change Password
Select Change and enter the 4-digit password to set the
parental lock using the number buttons on the remote
control.
If you forgot your password
1 . Remove the disc.
2 . Press and hold the STOP () button on the remote
control for 5 seconds or more. All settings will revert
to the factory settings.
Support
| NOTE |
This option is not activated if you select OK. To
Product Information
activate this option, please activate the DivX(R)
Deactivation.
Even after you reset the system, the settings of DivX
Registration will not be reset.
Provide the product information such as Model code,
Softrware Version, etc.
| 18 English
HT-F450-ENG MIC-12-12.indd 18
2013-2-18 13:54:04
Basic Functions
JPEG File Playback
  Place a disc gently into the tray with the disc's
label facing up  .
Insert a JPEG disc  ◄► (select Photo)  ▲▼ (select
the desired folder)  E  ▲▼ (select the desired
photo)  E
05
Disc Playback
When you stop disc play, the product remembers
where you stopped, so when you press 6 button
again, it will pick up where you left off. (Resume
function works only with DVDs.)
Press the 5 button twice during playback to disable
the Resume function.
Pirated discs will not play in this product because
they violate the CSS (a copy protection system)
recommendations.
will appear when an invalid button is pressed.
If no button input is made for more than 5 minutes in
Stop or Play (music) mode, the screen saver will get
activated.
If the product is left in the screen saver mode for more
than 20 minutes, the power will automatically turn off.
(Except during play a music)
Audio CD(CD-DA)/MP3/WMA
Playback
1 . Insert an Audio CD(CD-DA) or an MP3 Disc.
• For an Audio CD, the first track will be played
automatically.
- Press the #$ buttons to move to the
previous/next track.
• For the MP3/WMA disc, press the ◄► buttons to
select Music, then press the E button.
- Press the ▲▼◄► buttons to select a desired
file and press the E button.
- Press the  buttons to move to the
previous/next pages.
2 . Press the 5 button to stop playback.
| NOTE |
Some MP3/WMA-CDs may not play, depending on
the recording mode.
Table of contents of a MP3-CD varies depending on
the MP3/WMA track format recorded on the disc.
WMA-DRM files cannot be played.
The product will automatically turn off from no Disc
and Stop mode for more than 25 minutes.
• The selected file will play and slide show will start.
To stop slide show, press the 7 button.
• You can view the previous/next file by pressing the ◄,►
buttons during the slideshow mode.
Basic Functions
| NOTE |
Rotate Function
Press the GREEN(B) or YELLOW(C) button during the
PAUSE mode.
Using the Playback Function
Forward/Reverse Search
Press the  buttons for Search Function.
| NOTE |
No sound is played in search mode.
The playback search produces sound only when
searching at 1 and 2 speed.
This function is available only for the CD-DA.
Skipping Scenes/Songs
Press the #$ buttons.
• Each time the button is pressed during playback, the
previous or next chapter, track or directory (file) will be
played.
• You cannot skip chapters consecutively.
Slow Motion Play
Press the 7 button and then  button for Slow
Motion play.
| NOTE |
No sound is heard during slow playback.
Reverse slow playback does not work.
This function is available for the DivX/DVD.
Step Motion Play
Press the 7 button repeatedly.
• The picture moves forward one frame each time the
button is pressed during playback.
| NOTE |
No sound is heard during step motion playback.
This function is available for the DivX/DVD.
English
HT-F450-ENG MIC-12-12.indd 19
19 |
2013-2-18 13:54:07
Basic Functions
5 Minute Skip Function
A-B Repeat Playback
During playback, press the ◄,► button.
• Playback skips 5 minutes forward whenever you press
the ► button.
• Playback skips 5 minutes backward whenever you
press the ◄ button.
You can repeatedly play back a designated section of a
DVD or CD.
| NOTE |
This function is available only for the DivX that contains
time information.
1 . During the DVD disc or CD playback, press the
REPEAT button on the remote control.
2 . For DVD, press the ▲▼ buttons to select A-. For
CD press the REPEAT button repeatedly until
appears.
3 . Press the E button at the point where you want
repeat play to start (A).
Using the Disc/Title Menu
4 . Press the E button at the point where you want
repeat play to stop (B).
During playback,
5 . To return to normal playback,
DISC MENU or TITLE MENU ▲▼◄► E
• Disc Menu : You can view the menus for the audio
language, subtitle language, profile, etc.
• Title Menu : For DVDs containing multiple titles, you
can view the title of each movie.
For DVD, press the REPEAT button ,then press the
▲▼ buttons to select to OFF. For CD, press the
REPEAT button to select to .
| NOTE |
The A-B Repeat function does not operate with DivX,
MP3 or JPEG discs.
| NOTE |
Depending on the disc, menu setup items may vary
and this menu may not be available.
Displaying Disc Information
1 . During playback, press the TOOLS button on the
remote control.
Repeat Playback
2 . Press the ▲▼ buttons to select the desired item.
3 . Press the ◄► buttons to make the desired setup
DVD/DivX Repeat
You can repeat the title, chapter or the section(A-B
Repeat) of the DVD/DivX.
1 . During DVD/DivX playback, press the REPEAT
button on the remote control.
2 . Press the ▲▼ buttons to select a desired repeat
change and then press the E button.
• You may use the number buttons of the remote
control to control some items.
4 . To make Disc information disappear, press the
TOOLS button again.
| NOTE |
mode, then press the E button.
3 . Press the ▲▼ buttons to select OFF to return to
normal play, then press the E button.
Some tools menus may differ depending on discs and
files.
CD/MP3 Repeat
TOOLS menu
During the CD/ MP3 playback, press the REPEAT button
repeatedly to select the repeat mode you want.
• Title(
) : To access the desired title when there is
more than one in the disc.
• Chapter(
) : Most DVD discs are recorded in
chapters so that you can quickly find a specific chapter.
• Playing time(
) : Allows playback of the film from
a desired time. You must enter the starting time as a
reference. The time search function does not operate
on some discs.
• Audio(
): Refers to the film's soundtrack language.
A DVD Disc can contain up to 8 audio languages.
(Off) (Track) • CD :
(Random) (Section A-B)
• MP3 :
(Off) (Track) (All)
(Random)
(All) (Directory)
| 20 English
HT-F450-ENG MIC-12-12.indd 20
2013-2-18 13:54:10
| NOTE |
Depending on the disc, the Subtitle and Audio
Language functions may not be available.
This will regulate and stabilize the volume level against
a drastic volume change when changing channels or
during a scene transition.
SMART VOLUME ON SMART VOLUME OFF
S/W LEVEL
S/W LEVEL
You can also press the S/W LEVEL button on the
remote control and use the ◄ or ► buttons to adjust
the level of subwoofer.
The Angle function works only with discs on which
multiple angles have been recorded.
Basic Functions
TOOLS  ▲▼ (select AUDIO, SUBTITLE or ANGLE)
 ◄► (select the desired option)
S.VOL
S.VOL (smart volume)
05
• Subtitle(
): Refers to the subtitle languages
available in the disc. You will be able to choose the
subtitle languages or, if you prefer, turn them off from
the screen. A DVD Disc can contain up to 32 subtitle
languages.
• Angle(
): When a DVD contains multiple angles of a
particular scene, you can use the Angle function.
DSP/EQ
DSP (Digital Signal Processor)/EQ
Caption Function
• You must have some experience with video extraction
and editing in order to use this feature properly.
• To use the caption function, save the caption file (*.smi)
in the same file name as that of the DivX media file (*.avi)
within the same folder.
• Up to 100 alphanumeric characters or 50 East Asian
characters (2 byte characters such as Korean and
Chinese) for the file name.
• The subtitle of DivX files are *.smi, *.sub, *.srt over 148
kbyte is not supported.
Using the Special Remote Control
Buttons
DSP (Digital Signal Processor)
DSP modes have been designed to simulate different
acoustic environments.
EQ
You can select POPS, JAZZ , ROCK, or USER to
optimize the sound for the genre of music you are
playing.
| NOTE |
The DSP/EQ function is only available in Stereo
mode.
The DSP/EQ function is not available while playing
AC3 signal in 2.1 channel mode.
Some regional EQs are special,such as India,Africa,and
P.BASS
P.BASS
The P.BASS function provides a bass boost to
reinforce the low frequencies.
| NOTE |
The P.BASS function is only available with 2
channel LPCM sources such as MP3, DivX, CD
and WMA.
GIGA
GIGA
The GIGA Sound Function amplifies bass and
improves bass twice as much for you to appreciate
powerful real sound. (Subwoofer only)
so on.Please refer to the display of actual product to
operate.
FOOTBALL
FOOTBALL
Enjoy the music like on the soccer field with FOOTBALL
button.
Each time you press the FOOTBALL button on the
remote control.
FOOTBALL MODE ON FOOTBALL MODE OFF
FOOTBALL MODE ON: You will feel to enjoy music on
the soccer field.
|NOTE |
The GIGA Sound works when in 2-channel LPCM
mode only.
GIGA doesn't work when connecting the
microphone to the MIC jack.
English
HT-F450-ENG MIC-12-12.indd 21
21 |
2013-2-18 13:54:17
Basic Functions
V SURROUND
V SURROUND
Listening to Radio
Using buttons on the Remote Control
It is only operational when 2 Channel Audio is
playing. It will change 2 channel Audio Source to 5.1
channel Sound and there is output.
Each time you press the V-SURROUND button on
the remote control.
Virtual Surround on Virtual Surround off
• Virtual Surround on: change 2 channel audio to
5.1 channel and there is Sound output by 5.1
channel.
• Virtual Surround off: Output of 2 channel Audio
is Sound output by 2 channel. (Original Sound).
TV SOUND
TV SOUND
1 . Press the FUNCTION button to select FM.
2 . Tune in to the desired station.
• Preset Tuning 1 : You must first add a desired
frequency as a preset. Press the 5 button to
select PRESET and then press the TUNING/CH
(,.) button to select the preset station.
• Manual Tuning : Press the 5 button to select
MANUAL and then press the TUNING/CH (,.)
button to tune in to a lower or higher frequency.
• Automatic Tuning : Press the 5 button to select
MANUAL and then press and hold the TUNING/
CH (,.) button to automatically search the
band.
Setting Mono/Stereo
You can listen via Home Theater Speaker or TV Speaker
with TV SOUND button.
1 . Connect the HDMI cable to TV and Home theater.
2 . Press the TV SOUND button on the remote
control.
3 . Each time you press the TV SOUND button, TV
SOUND ON/OFF flashes shortly on the Display
part on the Front panel, then change to D.IN.
-TV SOUND ON : Output to Home Theater
Speaker. -TV SOUND OFF : Output to Anynet+
connected TV Speaker.
Press the MO/ST button.
• Each time the button is pressed, the sound switches
between STEREO and MONO.
• In a poor reception area, select MONO for a clear,
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1 . Press the FUNCTION button to select FM.
2 . Press the TUNING/CH (,.) button to select
<89.10>.
Use in this case:
1) If you want to listen to the sound via home theater
speaker when you watch a TV.
2) If you want to listen to the sound from the USB media
that plugged to the TV via home theater speaker.
TV SOUND ON/OFF support specification
3 . Press the TUNER MEMORY button.
• Number flashes on the display.
4 . Press the TUNING/CH (,.) buttons to select
preset number.
• You can select between 1 and 15 presets.
5 . Press the TUNER MEMORY button again.
Connected
TV
Anynet+
(HDMI-CEC)
supported
TV
Anynet+
(HDMI-CEC)
supported
TV
TV Anynet+
(HDMI-CEC)
Setting
TV
Sound
ON
TV
Sound
OFF
ON
O
O
OFF
O
O
No opeartion
O
O
• Press the TUNER MEMORY button before
number disappears from the display.
• Number disappears from the display and the
station is stored in memory.
6 . To preset another station, repeat steps 2 to 5.
Make sure that D.IN function is changed to TV CEC
ON state,otherwise ARC audio is not available .
| 22 English
HT-F450-ENG MIC-12-12.indd 22
2013-2-18 13:54:20
USB Function
USB Recording
1 . Connect the USB device to your product.
2 . Insert the CD-DA disc into the CD tray.
3 . Press the USB REC button on the remote control.
Basic Functions
You can enjoy media files such as pictures, movies and
music saved on an MP3 player, USB memory stick or
digital camera in high quality video with 5.1 channel
sound by connecting the storage device to the USB port
of the product.
While playing CD-DA using the USB Recording function
or listening to the FM radio or receiving audio source from
an external device, you can record the audio source in
the USB memory.
Ex) USB recording of CD-DA audio contents
05
Playing Media Files using the USB Host
Feature
• To start recording the current track, press the
USB REC button on the remote control while the
system is playing a track or stopped temporarily.
5V 500mA
AUX IN 1
• To record the entire CD, press and hold the USB
REC button on the remote control.
- "FULL RECORDING" appears on the
displayand recording starts.
4 . Press the 5 button to stop recording.
• When USB recording of a CD is completed, you
will find a new folder named “RECORDING” in the
USB drive. The contents will be saved in the folder
in the MP3 format.
1 . Connect the USB device to the USB port on the
front panel of the product.
2 . Press the FUNCTION button to select USB.
• When USB recording of FM radio or AUX source
is completed, you will find a new folder named
“TUNER RECORDING or AUX RECORDING” in
the USB drive. The contents will be saved in the
folder in the MP3 format.
• USB appears on the display screen and then
disappears.
3 . Press the ◄► buttons to select Videos, Photos or
Music.
• Select a file to play.
| NOTE |
Safe USB Removal
To prevent damage to the memory stored in the USB
device, perform safe removal before disconnecting the
USB cable.
• Press the YELLOW(C) button.
- REMOVE will appear on the display.
• Remove the USB cable.
| NOTE |
Remove the USB cable from the USB port slowly.
Otherwise, it may cause damage to the USB port.
The product will automatically turn off from no USB
and Stop mode for more than 25 minutes.
Do not disconnect the USB connection or the power cable
during the USB Recording. Otherwise, it may cause damage to
the data.
To stop USB Recording, press the 5 button and disconnect
the USB device after the system stops playing the CD
completely.
If you disconnect the USB connection during the USB
Recording, the system will turn off and you will not be able to
delete the recorded file.
If you connect the USB device to the system while it is playing
a CD, the system stops temporarily and will play again.
If the recording duration is less than 5 seconds, a recording file
may not be created.
USB Recording works only if the USB device is formatted in the
FAT file system. (The NTFS file system is not supported.)
The audio signal will not be output during USB recording of the
CD in no MIC connecting state.Otherwise,The audio signal will
be output during USB recording of the CD in MIC connecting
state.
When Speaker selection is set to TV Speaker, the USB
Recording function is not supported.
Disconnect the microphone to the set during recording,
recording will be stopped.
The set will be started X3 recording when the Microphone
doesn't connect to the set.
Any button except Stop /Volume/Mute/ Mic Volume/Echo
button doesn't work during USB recording.
English
HT-F450-ENG MIC-12-12.indd 23
23 |
2013-2-18 13:54:25
Other Information
Troubleshooting
Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed
below or if the instruction below does not help, turn off the product, disconnect the power cord, and contact the nearest
authorized dealer or Samsung Electronics Service Centre.
Symptom
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this product.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is
pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and step motion
playback.
• Are the speakers connected properly? Is the speaker setup correctly
customized?
• Is the disc severely damaged?
Sound can be heard only
from a few speakers and
not all 6.
•
•
•
•
Dolby Digital 5.1 CH
Surround Sound is not
produced.
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround
Sound is produced only if the disc is recorded with 5.1 channel sound.
• Is the audio language correctly set to Dolby Digital 5.1-CH in the information
display?
The remote control does
not work.
• Is the remote control being operated within its operation range of angle and
distance?
• Are the batteries drained?
• Have you selected the correct mode (RECEIVER DVD/TV)?
• Disc is rotating but no
picture is produced.
• Picture quality is poor
and picture is shaking.
•
•
•
•
Audio language and
subtitles do not work.
• Audio language and subtitles will not work if the disc does not contain them.
The Disc/Title menu
screen does not appear
even when the Disc/Title
function is selected.
On certain DVD discs, sound is output from the front speakers only.
Check if the speakers are connected properly.
Adjust the volume.
When listening to a CD, radio or TV, sound is output to the front speakers only.
Select V-SURROUND (Virtual Surround) on the remote control to use all six
speakers.
Is the TV power on?
Are the video cables connected properly?
Is the disc dirty or damaged?
A poorly manufactured disc may not be playable.
• Are you using a disc that does not contain menus?
| 24 English
HT-F450-ENG MIC-12-12.indd 24
2013-2-18 13:54:30
Symptom
Check/Remedy
• The product is not
working.
(Example: The power
goes out or the front
panel key doesn't work
or a strange noise is
heard.)
• The product is not
working normally.
• Press and hold the 5 button on the remote control for longer than
5 seconds with no disc (reset function).
The rating level password
has been forgotten.
• While “NO DISC” message appears on the display of the product, press and
hold the remote control's 5 button for longer than 5 seconds. “INIT” appears
on the display and all settings will return to the default values.
And then press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Other Information
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3
PAN SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD
disc jacket and then select the appropriate function.
06
Aspect ratio cannot be
changed.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio
broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area
with good reception.
Specifications
General
FM Tuner
Weight
2.3 Kg
Dimensions
430 (W) x 61 (H) x 242 (D) mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Signal/noise ratio
60 dB
Usable sensitivity
10 dB
Total harmonic distortion
1%
Reading Speed : 3.49 ~ 4.06 m/sec.
DVD (Digital Versatile Disc)
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Disc
CD : 12cm (COMPACT DISC)
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
CD : 8cm (COMPACT DISC)
Maximum Play Time : 20 min.
576i(480i)
Video
Output
Composite Video
Video/Audio
HDMI
1 channel : 1.0 Vp-p (75 load)
1080p, 1080i, 720p, 576p(480p)
English
HT-F450-ENG MIC-12-12.indd 25
25 |
2013-2-18 13:54:34
Other Information
Front speaker output
167W x 2(3)
Centre speaker output
165W(3)
Surround speaker output
167W x 2(3)
Subwoofer speaker output
167W(3)
Frequency response
20Hz~20KHz
S/N Ratio
65dB
Channel separation
55dB
Input sensitivity
(AUX)800mV
Amplifier
5.1ch speaker system
Speaker system
Front
Surround
Centre
Subwoofer
Impedance
3
3
3
3
Frequency range
140Hz~20kHz
140Hz~20kHz
140Hz~20kHz
20Hz~160Hz
Output sound
pressure level
86dB/W/M
86dB/W/M
86dB/W/M
88dB/W/M
Rated input
167W
167W
165W
167W
Maximum input
334W
334W
330W
334W
Dimensions (W x H x D) (Unit : mm)
Front
Surround
HT-F450K
95 x 144 x 74
95 x 116 x 74
HT-F453K
94.8 x 1112 x 74.5
* Stand base: 276 x 189
95 x 116 x 74
HT-F455K
94.8 x 1112 x 74.5
* Stand base: 276 x 189
94.8 x 1112 x 74.5
* Stand base: 276 x 189
HT-F453HK
120 x 612 x 71 mm
*stand base : 210 x 210
HT-F445K
89 x 1053 x 71 mm
*stand base : 229 x 229
Speaker
Centre
Subwoofer
227 x 95 x 74
220 x 380 x 363
90 x 141 x 68
360 x 74 x 68
200 x 390 x 356
89 x 1053 x 71 mm
*stand base : 229 x 229
228 x 77 x 70
168 x 350 x 285
Weights (Unit : kg)
Front
Surround
HT-F450K
0.37
0.35
Centre
Subwoofer
HT-F453K
2.86
0.35
0.51
6.84
HT-F455K
2.86
2.86
HT-F453HK
1.8
HT-F445K
2.93
0.62
0.88
6.06
2.93
0.49
3.67
*: Nominal specification
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
• Design and specifications are subject to change without prior notice.
• For the power supply and Power Consumption, refer to the label attached to the product.
| 26 English
HT-F450-ENG MIC-12-12.indd 26
2013-2-18 13:54:36
OpenSSL License
The OpenSSL toolkit stays under a dual license, i.e. both the
conditions of the OpenSSL License and the original SSLeay license
apply to the toolkit. See below for the actual license texts. Actually
both licenses are BSD-style Open Source licenses. In case of any
license issues related to OpenSSL please contact openssl-core@
openssl.org.
OpenSSL License
Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer
in the documentation and/or other materials provided with the
distribution.
3. All advertising materials mentioning features or use of this
software must display the following acknowledgment: "This
product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit. (http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must
not be used to endorse or promote products derived from this
software without prior written permission. For written permission,
please contact openssl-core@openssl.org.
5. Products derived from this software may not be called
"OpenSSL" nor may "OpenSSL" appear in their names without
prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following
acknowledgment: "This product includes software developed by
the OpenSSL Project for use in the OpenSSL Toolkit (http://www.
openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT
``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com). This product includes software written by Tim
Hudson (tjh@cryptsoft.com).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights
reserved.
This package is an SSL implementation written by Eric Young (eay@
cryptsoft.com).
The implementation was written so as to conform with Netscapes
SSL.
This library is free for commercial and non-commercial use as
long as the following conditions are aheared to. The following
conditions apply to all code found in this distribution, be it the RC4,
RSA, lhash, DES, etc., code; not just the SSL code. The SSL
documentation included with this distribution is covered by the
same copyright terms except that the holder is Tim Hudson (tjh@
cryptsoft.com).
Copyright remains Eric Young's, and as such any Copyright notices
in the code are not to be removed. If this package is used in a
product, Eric Young should be given attribution as the author of
the parts of the library used. This can be in the form of a textual
message at program startup or in documentation (online or textual)
provided with the package.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer
in the documentation and/or other materials provided with the
distribution.
3. All advertising materials mentioning features or use of this
software must display the following acknowledgement:
"This product includes cryptographic software written by Eric
Young (eay@cryptsoft.com)"
The word 'cryptographic' can be left out if the rouines from the
library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof)
from the apps directory (application code) you must include an
acknowledgement: "This product includes software written by
Tim Hudson (tjh@cryptsoft.com)"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available
version or derivative of this code cannot be changed. i.e. this code
cannot simply be copied and put under another distribution licence
[including the GNU Public Licence.]
English
HT-F450-ENG MIC-12-12.indd 27
27 |
2013-2-18 13:54:38
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the
SAMSUNG customer care centre.
Area
` North America
Canada
Mexico
U.S.A
Contact Centre 
Web Site
1-800-SAMSUNG (726-7864)
01-800-SAMSUNG (726-7864)
1-800-SAMSUNG (726-7864)
www.samsung.com
www.samsung.com
www.samsung.com
0800-333-3733
0800-124-421 / 4004-0000
800-SAMSUNG (726-7864)
01-8000112112
0-800-507-7267
1-800-751-2676
1-800-10-7267
800-6225
1-800-299-0013
800-7919267
1-800-234-7267
00-1800-5077267
800-7267
0-800-777-08
1-800-682-3180
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
1-800-SAMSUNG (726-7864)
www.samsung.com
0-800-100-5303
www.samsung.com
42 27 5755
0810 - SAMSUNG (7267864,
€ 0.07/min)
-
` Latin America
Argentine
Brazil
Chile
Colombia
Costa Rica
Dominica
Ecuador
El Salvador
Guatemala
Honduras
Jamaica
Nicaragua
Panama
Peru
Puerto Rico
Trinidad &
Tobago
Venezuela
Austria
Belgium
02-201-24-18
Bosnia
Bulgaria
Croatia
05 133 1999
07001 33 11
062 SAMSUNG (062 726 7864)
800-SAMSUNG (800-726786)
Samsung Zrt., česká organizační
složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8
70 70 19 70
030 - 6227 515
01 48 63 00 00
01805 - SAMSUNG (726-7864
€ 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
+381 0113216899
261 03 710
020 405 888
0900-SAMSUNG (09007267864) (€ 0,10/Min)
815-56 480
0 801 1SAMSUNG (172678)
/ 022-607-93-33
80820-SAMSUNG (726-7864)
1. 08010 SAMSUNG (72678) doar din reţeaua Romtelecom,
tarif local
2. 021.206.01.10 - din orice
reţea, tarif normal
Czech
Denmark
Finland
France
Germany
Hungary
Italia
Kosovo
Luxemburg
Montenegro
Netherlands
Norway
Poland
Portugal
Rumania
Slovakia
Spain
Sweden
Contact Centre 
0700 Samsung (0700 726
7864)
0800-SAMSUNG (726-7864)
902-1-SAMSUNG (902 172 678)
0771 726 7864 (SAMSUNG)
Switzerland
0848-SAMSUNG (7267864,
CHF 0.08/min)
U.K
Eire
Lithuania
Latvia
Estonia
0330 SAMSUNG (7267864)
0818 717100
8-800-77777
8000-7267
800-7267
Uzbekistan
Kyrgyzstan
Tadjikistan
Ukraine
0-800-502-000
www.samsung.com
Belarus
Moldova
810-800-500-55-500
00-800-500-55-500
www.samsung.com/
be (Dutch)
www.samsung.com/
be_fr (French)
www.samsung.com
www.samsung.com
` Asia Pacific
www.samsung.com
Russia
Georgia
Armenia
Azerbaijan
Kazakhstan
Hong Kong
(852) 3698 4698
India
Japan
Malaysia
www.samsung.com
Philippines
www.samsung.com
www.samsung.com
www.samsung.com
-
Singapore
Thailand
Taiwan
Vietnam
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.ua
www.samsung.com/
ua_ru
-
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858 / 010-6475 1880
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/ch
www.samsung.com/
ch_fr/(French)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
-
Australia
New Zealand
China
Indonesia
www.samsung.com
Web Site
www.samsung.com
` CIS
8-800-555-55-55
8-800-555-555
0-800-05-555
088-55-55-555
8-10-800-500-55-500
(GSM: 7799)
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
` Europe
Albania
Area
Serbia
3030 8282 / 1800 110011 /
1800 3000 8282 / 1800 266 8282
0800-112-8888 / 021-56997777
0120-327-527
1800-88-9999
1-800-10-SAMSUNG(726-7864) /
1-800-3-SAMSUNG(726-7864) /
1-800-8-SAMSUNG(726-7864) /
02-5805777
1800-SAMSUNG (726-7864)
1800-29-3232 / 02-689-3232
0800-329-999
1 800 588 889
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/hk
www.samsung.com/
hk_en/
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
` Middle East
Bahrain
Egypt
Jordan
Morocco
Oman
Saudi Arabia
Turkey
U.A.E
8000-4726
08000-726786
800-22273
080 100 2255
800-SAMSUNG (726-7864)
9200-21230
444 77 11
800-SAMSUNG (726-7864)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
0800-SAMSUNG (726-7864)
0860-SAMSUNG (726-7864 )
www.samsung.com
www.samsung.com
` Africa
Nigeria
South Africa
AH68-02579K-00
HT-F450-ENG MIC-12-12.indd 28
2013-2-18 13:54:42