Miele Coffee System Operating instructions

Operating instructions
Freestanding coffee machine
To avoid the risk of accidents or damage to the machine, it is essential
to read these instructions before it is installed and used for the first time.
en - GB
M.-Nr. 09 732 130
Packaging material / Disposal of old machine
Packaging material
Disposing of your old machine
The packaging material used protects
the machine during transportation.
Electrical and electronic appliances
often contain valuable materials. They
also contain materials which, if handled
or disposed of incorrectly, could be
potentially hazardous to human health
and to the environment. They are,
however, essential for the correct
functioning of your appliance. Please
do not therefore dispose of it with your
household waste.
Please retain the original box and
polystyrene pieces so that you can
pack the machine securely, should you
need to transport it in the future.
The original packaging should also be
kept in case the machine ever needs to
be returned to Miele for servicing.
Please dispose of it at your local
community waste collection / recycling
centre.
Ensure that it presents no danger to
children while being stored for
disposal.
2
Contents
Packaging material / Disposal of old machine . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Display and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Switching on for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Filling the water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Filling the coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Switching on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Adjusting the central spout to the correct cup height . . . . . . . . . . . . . . . . . . . 21
Making drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Espresso or coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
To make two portions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Cancelling preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Making coffee with ground coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Adding ready ground coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Making coffee with ready ground coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Drinks with milk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Stainless steel milk flask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Coffee the way you like it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Grinder setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Displaying and changing the parameters of a drink . . . . . . . . . . . . . . . . . . . . . . . 28
Amount of coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Brew temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Pre-brewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Portion size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Changing portion size while making a drink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Changing portion sizes in the "Parameters" menu ,.. . . . . . . . . . . . . . . . . . . . . . 31
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Calling up the "Settings" menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Changing and saving settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Overview of available settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Contents
Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Eco mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Info (display information) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Locking the coffee machine (System lock 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Display brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Showroom programme (Demo mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Rinsing the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
The central spout with cappuccinatore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Milk flask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Drip tray cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Drip tray and waste container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Bean container and ground coffee chute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Removing and cleaning the brew unit by hand . . . . . . . . . . . . . . . . . . . . . . . . 45
Degreasing the brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Descaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Transporting the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Evaporating the coffee machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Packing the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Appliance dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Warning and Safety instructions
This coffee machine complies with current safety requirements.
Improper use can, however, present a risk of both personal injury
and material damage.
To avoid the risk of accidents and damage to the machine,
please read these instructions carefully before using it for the first
time. They contain important notes on setting it up, as well as on
its safety, operation and maintenance.
Miele cannot be held liable for damage caused by
non-compliance with these Warning and Safety instructions.
Keep the instructions in a safe place and pass them along to any
future owner.
Correct application
~ This coffee machine is intended for use in domestic households
and similar working and residential environments.
~ This coffee machine is not intended for outdoor use.
~ The machine is only intended for making domestic quantities of
coffee based drinks such as espresso, cappuccino, latte macchiato
etc. Any other usage is at the owner's risk.
~ This coffee machine can only be used by people with reduced
physical, sensory or mental capabilities, or lack of experience and
knowledge, if they are supervised whilst using it, or have been
shown how to use it in a safe way and recognise and understand the
consequences of incorrect operation.
5
Warning and Safety instructions
Safety with children
, There is a danger of burning and scalding from the coffee
and hot water dispensing spouts.
Children's skin is far more sensitive to high temperatures than that
of adults.
Ensure children do not touch hot surfaces of the coffee machine
or place parts of their body under the dispensing spouts.
~ Place the coffee machine where it is out of the reach of children.
~ Children under eight years of age must be kept away from the
machine and the mains connection cable and plug/socket.
~ Children eight years and older may only use the coffee machine
unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation.
~ Children must not be allowed to clean the coffee machine
unsupervised.
~ Children should be supervised when they are near the coffee
machine. Do not allow them to play with it or to use the controls.
Remember that coffee and espresso are not suitable drinks for
children.
~ Danger of suffocation.
Packaging, e.g. plastic wrappings, must be kept out of the reach of
babies and children. Whilst playing, they could become entangled
in packaging or pull it over their head and suffocate.
6
Warning and Safety instructions
Technical safety
~ A damaged coffee machine is dangerous. Check it for any visible
damage before setting it up. Never attempt to use a damaged
coffee machine.
~ Before connecting the coffee machine to the mains supply, make
sure that the rating on the data plate corresponds to the voltage and
frequency of the household supply. This data must correspond in
order to avoid the risk of damage to the machine. Consult a qualified
electrician if in any doubt.
~ The electrical safety of this coffee machine can only be
guaranteed when correctly earthed. It is essential that this standard
safety requirement is met. If in any doubt please have the electrical
installation tested by a qualified electrician.
~ Do not connect the machine to the mains electricity supply by a
multi-socket unit or an extension lead. These are a fire hazard and
do not guarantee the required safety of the machine.
~ Unplug the machine from the power supply immediately if you
notice any damage or smell scorching, for example.
~ Ensure that the mains connection cable cannot be pinched or
damaged by any sharp edges.
~ The mains connection cable should not hang down. Someone
could trip over it with the risk of injury and damage the machine.
~ The coffee machine must not be used in mobile installations such
as ships.
~ Only use the coffee machine in rooms where the ambient
temperature is between +10 °C and +38 °C.
~ Danger of overheating. Ensure that there is sufficient ventilation
around the coffee machine. Do not cover it with tea towels etc. whilst
it is in use.
7
Warning and Safety instructions
~ If the coffee machine is installed behind a kitchen furniture door,
it may only be used with the furniture door open. Do not close the
furniture door while the coffee machine is in use.
~ Protect the coffee machine from water and water spray. Do not
immerse the machine in water.
~ Repairs and other work by unqualified persons to the machine
and the connection cable could be dangerous. The manufacturer
cannot be held liable for unauthorised work. Repairs may only be
carried out by a Miele authorised service technician.
~ The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.
~ Faulty components must only be replaced by genuine Miele
Original spare parts. The manufacturer can only guarantee the
safety of the machine when Miele replacement parts are used.
~ The machine must be disconnected from the electricity supply
during repair work.
~ Disconnect the coffee machine from the power supply if it is not
going to be used for a while.
~ Use only Miele Original accessories with this machine. If
accessories from other manufacturers are used, the warranty will be
invalidated, and Miele cannot accept liability.
8
Warning and Safety instructions
Correct use
, The spouts present a danger of burning or scalding.
The liquids and steam dispensed are very hot.
~ Please note:
– Keep well away from the area underneath the spouts when hot
liquids and steam are being dispensed.
– Do not touch hot components.
– Hot liquid or steam could spatter from the spouts. Ensure that the
central spout is clean and fitted correctly.
– Water in the drip tray can also be very hot. Take care when
emptying it.
~ Clean the coffee machine thoroughly before using for the first
time (see "Cleaning and care").
~ To avoid the risk of damage to the machine please note the
following regarding water:
– Fill the water container with fresh, cold tap water only. Hot or warm
water or other liquids could damage the coffee machine.
– Change the water every day to prevent a build-up of bacteria.
– Do not use mineral water. Mineral water will cause serious
limescale deposits to build up in your machine and damage it.
– Do not use water from a reverse osmosis unit in this machine.
~ Only fill the bean container with roasted coffee beans. Do not fill
the bean container with coffee beans which have been treated or
with ground coffee.
~ Do not use coffee beans which have been treated with caramel,
sugar or other substances including sugary liquids. Sugar will
damage the coffee machine.
9
Warning and Safety instructions
~ Only add ground coffee or cleaning tablets to the ground coffee
chute. The cleaning tablets are used for degreasing the brew unit.
~ Only use milk without additives. Additives in milk usually contain
sugar and this will stick to the milk pipework.
~ If using dairy milk make sure that it has been pasteurised.
~ Do not place any alcohol mixtures which are alight underneath
the central spout. The flames could ignite plastic components and
cause them to melt.
~ Do not use naked flames, e.g. a candle on or near the coffee
machine. The coffee machine could catch fire with the risk of the fire
spreading.
~ Please note the following with regard to cleaning the coffee
machine:
– Disconnect the coffee machine from the power supply before
cleaning.
– Clean the coffee machine daily (see "Cleaning and care").
– Ensure that all components in which milk is transported are
cleaned on a regular basis.
Milk naturally contains bacteria that rapidly multiply if the milk
pipework is not cleaned properly. Soiling in the appliance may be
dangerous to health.
– Do not use a steam cleaner to clean this machine. Steam could
reach the electrical components and cause a short circuit.
~ Descale the coffee machine regularly using the appropriate
number of Miele descaling tablets for the water hardness level in
your area. Descale the machine more frequently in areas with very
hard water. Miele cannot be held liable for damage arising from
insufficient descaling.
10
Warning and Safety instructions
~ Degrease the brew unit regularly with Miele cleaning tablets.
Depending on the natural oil content of the coffee used, the brew
unit can become blocked quite quickly.
~ Used coffee grounds should be disposed of with the organic
rubbish or on the compost heap. Do not empty them down the sink,
as they could block it.
~ The machine must not be used for cleaning objects.
11
Accessories
The following accessories are included
with your coffee machine depending
on model:
– Measuring scoop
for ground coffee
– Cleaning tablets
for degreasing the brew unit
(starter set)
– Descaling tablets
for descaling the water pipework
(starter set)
– Test strips
for determining the water hardness
level
– Cleaning brush
for cleaning the milk tube
These products and other useful
accessories can be ordered via the
internet at www.miele-shop.com or
from Miele (see back of booklet for
contact details).
12
Miele also offers a range of optional
accessories, as well as cleaning and
conditioning products for your coffee
machine.
– Stainless steel milk flask MB-CM
for keeping milk cool for longer
(capacity 0.5 l)
– Microfibre cloth
for removing finger marks and light
soiling
– Cleaning agent for milk pipework
for cleaning the milk system
– Cleaning tablets
for degreasing the brew unit
– Descaling tablets
for descaling the water pipework
Guide to the machine
a Master switch
b Controls and display
c Water container
d Ground coffee chute
e Coffee bean container
f Grinder setting
(behind the service panel)
i Park position for milk pipework
(behind the service panel)
j Drip tray with lid and waste container
k Milk tube aperture
l Holder for drip tray cover and drip
tray cover
m Milk flask
(not supplied)
g Brew unit (behind the service panel)
h Central spout with integrated
cappuccinatore
13
Display and controls
a On/Off -
For switching the coffee machine on and off
b Drink sensors
For making
. Espresso
/ Coffee
H Cappuccino
k Latte macchiato
c Display
Shows information about the current action or status
d Back #
For returning to the previous menu, cancelling
unwanted actions
e Arrow sensors Y X
For displaying further options and highlighting a
selection.
f OK
For confirming display messages and saving
settings
g Optical interface
(for service technician use only)
h LED
Flashes on and off when the machine is switched on
and the display is black
i Menus X
"Other drinks": Long coffee, Caffè Latte, Hot milk and
Milk froth
"Maintenance"
"Settings J"
j Parameters ,
For changing drinks settings
k Two portions °
For making two portions of a drink
14
Before using for the first time
Language
Before using the coffee machine for
the first time, please read these
instructions and make yourself
familiar with the appliance and its
controls.
^ Use the arrow sensors to highlight
the required language. Then touch
OK.
^ Use the arrow sensors to highlight
the required country. Then touch OK.
Before using for the first time
The setting is now saved.
^ Set up the coffee machine and
remove any protective film (see
"Installation").
Time
Clean the machine thoroughly
before filling it with water and coffee
beans (see "Cleaning and care").
^ Insert the plug of the coffee machine
into the socket (see "Electrical
connection").
^ Touch the arrow sensors until the
current hour appears. Then touch
OK.
^ Touch the arrow sensors until the
current minutes appear. Then touch
OK.
The setting is now saved.
Switching on for the first time
The message "Set up successfully
completed" will then appear in the
display.
Switch the master switch on the left
hand side of the machine to the "I"
position.
"Fill and replace the water container"
will then appear in the display.
^ Fill the water container with fresh,
cold tap water.
Tip: To get the best out of your coffee
machine and to set it up for your
specific requirements, please continue
to work through these operating
instructions.
When you switch the machine on for the
first time the following message will
appear in the display: "Miele Willkommen".
15
Before using for the first time
Water hardness
Measuring water hardness
The water hardness level indicates how
much calcium is dissolved in the water.
The higher the calcium content, the
harder the water, and the harder the
water, the more often the coffee
machine will need to be descaled.
You can measure the water hardness
yourself using the enclosed test strip.
Alternatively, your local water authority
will be able to tell you the hardness of
water in your area.
The coffee machine measures the
amount of water used and steam made.
Depending on the level of water
hardness set, more or fewer drinks can
be dispensed before the appliance
needs to be descaled.
Programme the coffee machine to the
water hardness level of your area so
that it functions correctly and does not
get damaged. At the correct time a
prompt will then appear in the display
to descale the appliance.
The machine has four programmable
levels:
Water hardness
Descriptive
setting
Machine
setting
0 - 8.4 °dH
(0 -1.5 mmol/l)
Soft
Soft 1
8.4 - 14 °dH
(1.5 - 2.5 mmol/l)
Medium
Medium 2
14 - 21 °dH
(2.5 - 3.7 mmol/l)
Hard
Hard 3
More than 21 °dH Hard
(more than 3.7
mmol/l)
Very hard 4
^ Dip the strip in your drinking water for
approximately one second, then
shake off any excess water. The
result will be evident after about a
minute.
Now you can set the water hardness for
your coffee machine.
Setting the water hardness level
^ Touch X.
^ Touch the arrows sensors until
"Settings" is highlighted. Then touch
OK.
^ Use the arrow sensors to highlight
"Water hardness". Then touch OK.
^ Use the arrow sensors to highlight
the required water hardness. Then
touch OK.
The setting is now saved.
16
Operation
To operate the coffee machine, touch
the sensors with your finger.
You are in the drinks menu when the
display shows:
To select an option
^ Touch the X and Y arrow sensors
until the option you want is
highlighted.
To confirm your choice:
{ Miele
^ Touch OK.
Select drink
Exiting a menu or cancelling an
action
To exit the current menu:
To make a drink, touch one of the
drinks sensors.
^ Touch #.
The "Other drinks" menu is accessed
via the X menu.
If none of the sensors have been
touched for a while, the coffee machine
will revert to the drinks menu.
Selecting a menu and
navigating within a menu
To select a menu, touch the relevant
sensor. You will then be able to start an
action or change settings in the menu.
Settings
Sprache J
Time
Timer
A bar on the right-hand side indicates
that further options or text are available.
Use the arrow sensors to show these.
The setting which is currently selected
will have a tick ( beside it.
17
Filling the water container
The quality of the water plays an
important part in the quality of the
coffee.
Warning. Bacteria can cause
infection.
It is important to empty and fill the
container with fresh tap water every
day to avoid the risk of bacteria
building up.
Hot or warm water or other liquids
can damage the coffee machine.
Do not use mineral water in the
water container. It will cause serious
limescale deposits to build up in
your machine and damage it.
^ Press the lid on the right hand side.
^ Pull the water container up by the lid
to remove it.
^ Fill the water container with fresh,
cold tap water up to the "Max."
marker.
^ Replace the water container.
Tip: If the water container is a little
high or at a slant, check whether the
surface that the water container sits on
is dirty. If the water container is not
sitting correctly, the drain valve will not
be sealed. Clean the surface if
necessary.
18
Filling the coffee bean container
Fill the coffee bean container with
roasted coffee beans if you want to use
freshly ground coffee beans for each
cup of espresso or coffee.
Alternatively, you can make coffee or
espresso with ready ground coffee (see
"Making coffee or espresso using ready
ground coffee").
Warning.
Only put roasted coffee beans in the
container.
Anything else, including ground
coffee, will damage the grinder.
Warning.
Do not use coffee beans that have
been treated with sugar, caramel, or
other substances and do not put
liquids containing sugar in the
coffee bean container. Sugar will
damage the machine.
^ Take the lid off the coffee bean
container.
^ Fill the container with roasted coffee
beans.
^ Replace the lid.
Tip: Only add enough beans to last for
a few days as contact with air causes
coffee beans to lose their aroma.
19
Switching on and off
Switching on
Switching off
Switch the master switch on the left
hand side of the machine to the "I"
position.
^ Touch the On/Off sensor -.
^ Touch the On/Off sensor -.
If the coffee machine has been used for
making a drink it will rinse itself before
switching off.
The appliance will begin rinsing after
the heating-up phase. Hot water will
come out of the central spout.
If a drink has been made using milk,
the message "Place milk pipework in
drip tray" will appear in the display.
If the coffee machine still has an
operating temperature higher than
60 °C , then rinsing will not take
place.
Insert the end of the milk pipe into the
aperture in the drip tray, then
"Select type of drink" will appear in the
display.
If you do not touch any sensors or
run the maintenance programme, the
display will switch itself off after
approx. 7 minutes to save energy.
The right hand LED will flash on and
off as long as the machine is
switched on.
Touch any one of the sensors to
wake the machine up again to make
a drink.
^ Touch OK.
If the milk system is not rinsed out
before switching off, it will have to be
rinsed the next time the machine is
switched on.
Switching off for longer
periods of time
If the coffee machine is not going to be
used for a longer period of time:
^ Empty the drip tray, the waste
container and the water container.
^ Clean all parts thoroughly, including
the brew unit.
^ Switch the machine off with the
master switch and at the wall socket.
The time of day will not be saved. It will
have to be reset next time the machine
is switched on.
20
Adjusting the central spout to the correct cup height
You can adjust the central spout to suit
the height of the cup you are using so
that the coffee or espresso will not cool
down as quickly and the crema will
have a better consistency.
^ Pull the central spout down to the
same level as the rim of the cup.
or
^ Push the spout up until there is
enough room to fit the cup or mug
underneath.
21
Making drinks
Espresso or coffee
To make two portions
You can dispense two portions into one
cup or dispense two portions into two
cups at the same time.
To fill two cups at the same time:
^ Place a cup under the central spout.
^ Touch the sensor for the drink you
want:
.
Espresso
^ Place a cup under each coffee spout.
/
Coffee
^ Touch °.
X
Select "Long coffee" from the
Settings menu.
^ Touch the sensor for the drink you
want.
The coffee or espresso will be
dispensed from the central spout into
the cup.
To ensure that any coffee residues
from the factory testing process are
removed from the brewing system,
please throw away the first two cups
of coffee when using the coffee
machine for the first time.
22
Two portions of the desired drink will be
dispensed from the central spout.
Tip: If, after a while, you have not touch
one of the drinks sensors, the "Double
portion" ° option will revert back to
single portions after a while.
Making drinks
Cancelling preparation
To cancel preparation:
^ Touch one of the drinks sensors
again, or X for "Other drinks" again.
Tip: Drink preparation can be
cancelled by pressing the OK sensor
as soon as "Stop" appears in the
display.
When making coffee with milk or two
portions of a drink you can cancel
each stage individually.
^ Touch OK.
The machine will stop making the drink.
Making coffee with ground
coffee
To make espresso or coffee using
ready ground coffee, add a portion of
ground coffee to the ground coffee
chute.
This gives you the option of preparing a
cup of decaffinated coffee, for
example, even though the coffee bean
container is filled with roasted coffee
beans.
The coffee machine will recognise
automatically that ready ground coffee
has been added to the ground coffee
chute.
Only one portion can be made at a time
when using ready ground coffee or
espresso.
23
Making drinks
Adding ready ground coffee
Use the measuring scoop supplied so
that the correct amount is used.
Do not add more than one level
scoop of ground coffee to the coffee
chute. If too much is added, the
brew unit will not be able to process
the coffee.
Making coffee with ready ground
coffee
If you want to make a drink with ready
ground coffee:
^ Select "Yes" and touch OK.
You can now select which type of drink
you would like to make with ready
ground coffee.
^ Place a cup under the central spout.
The coffee machine will use all the
ground coffee which has been added
to the chute to make the next coffee.
^ Select the drink you want.
The coffee machine will now make the
drink you have chosen.
If you do not want to make a drink with
ready ground coffee:
^ Select "No" and touch OK.
The ground coffee will be directed into
the waste container.
If you do not touch a drinks sensor
within approx. 15 seconds, the
ground coffee will also be directed
into the waste container.
^ Open the ground coffee chute.
^ Add one level scoop of ready ground
coffee to the chute.
^ Close the coffee chute.
"Use ground coffee?" will appear in the
display.
24
Making drinks
Drinks with milk
You can use bottled milk or cartons
,Caution. Danger of burning and
scalding from the central spout.
Liquids and steam dispensed from
the spouts will be very hot.
Do not use milk with additives. Most
additives contain sugar which will
adhere to the milk pipework and
damage the machine.
As soon as you select a drink
containing milk the machine will start to
heat up. The milk will be drawn up into
the central spout where it is heated by
steam and also frothed for drinks
requiring milk froth.
The milk tube for cartons and other
suitable containers is located behind
the machine front.
If you have not made any milk drinks
for a while, rinse the milk system
through before making the first
drink. This will flush out any
bacteria.
The following drinks with milk can be
made:
Cappuccino consisting of approx. 2/3
milk froth and 1/3 espresso.
Latte macchiato consisting of 1/3 each
of hot milk, milk froth and espresso.
^ Connect the milk tube to the central
spout as illustrated.
^ Place a container with sufficient milk
beside the coffee machine on the
right hand side.
Caffè latte consisting of hot milk and
coffee.
Hot milk or milk froth can also be
made.
Tip: Good milk froth needs cold milk
(– 13 °C).
25
Making drinks
^ Place the end of the milk tube in the
container making sure that it is
sufficiently immersed in the milk.
Making drinks with milk
^ Place a suitable container
underneath the central spout.
^ Touch the sensor for the drink you
want:
H
Cappuccino
k
Latte macchiato
X
Go to "Other drinks:" for
Caffè Latte, Hot milk, Milk froth
The selected drink will now be made.
Stainless steel milk flask
(optional accessory, not supplied)
The stainless steel flask keeps milk cool
for longer. Good milk froth can only be
made with cold milk (– 13 °C).
^ Connect the stainless steel suction
tube to the inside of the lid. Make
sure that the slanted end is pointing
downwards as shown.
^ Fill the milk flask up to max. 2 cm
below the rim with milk. Seal the milk
flask with the lid.
^ Connect the stainless steel angled
end of the milk tube to the top of the
lid until it clicks into place.
^ Place the milk flask on the right hand
side of the coffee machine. Connect
the other end of the milk tube to the
central spout.
26
Coffee the way you like it
You can customise your coffee
machine to suit the type of coffee you
are using. The "Parameters" menu ,
allows you to adjust the amount of
coffee that is ground, set the brew
temperature and deselect the
"Pre-brewing" option.
The parameters for each type of coffee
can be individually specified.
The grinder can also be set to suit the
type of coffee beans being used.
To avoid damaging the grinder,
please note the following:
Only adjust the grinder one setting
at a time.
Grind the coffee beans again if you
want to adjust the grinder to the next
setting.
^ Open the door.
Grinder setting
When the beans are ground correctly,
the coffee or espresso will flow evenly
into the cup with a good crema.
The crema should have an even
nutbrown colour.
There are various ways to tell whether
the coffee grinder is set correctly.
The coffee has been too coarsely
ground if:
– Espresso or coffee flows into the cup
too quickly.
– The crema is very pale and uneven.
Set a finer grinder setting.
The coffee has been too finely ground
if:
– Espresso or coffee only trickles into
the cup.
– The crema is dark brown.
^ Push the slide control one setting to
the left (for finer grinding) or one
setting to the right (for coarser
grinding).
^ Close the machine door.
^ Make one cup of coffee.
Adjust the grinder setting again.
The altered grinder setting will not be
used until after the second coffee has
been dispensed.
Set a coarser grinder setting.
27
Coffee the way you like it
Displaying and changing the
parameters of a drink
^ Touch ,.
The , sensor will light up.
^ Select the drink you want and touch
OK.
The current settings for the amount of
coffee, brewing temperature and
pre-brewing will be displayed for this
drink.
^ Use the arrow sensors to change the
amount.
Then touch OK.
The setting is now saved.
Brew temperature
The ideal brewing temperature will
depend on
– the type of coffee being used,
– whether an espresso or a coffee is
being made, and
Amount of coffee
– the altitude of the region.
The coffee machine can grind and
brew 6-14 g of coffee per cup. The
greater the quantity, the stronger the
coffee or espresso.
The amount of coffee is too low if:
If the coffee machine is located at more
than 2000 metres above sea level, the
brewing temperature needs to be set
lower due to the change in pressure.
This is because the boiling point for
water at a high altitude above sea level
is lower than the boiling point for water
at sea level.
– Espresso or coffee flows into the cup
too quickly.
The coffee machine has five brewing
temperatures.
– The crema is very pale and uneven.
Tip: Not all types of coffee can
withstand high temperatures. Certain
types are too delicate - the crema on
top would not be as good and the taste
would be impaired.
There are various ways to tell whether
the amount of coffee is set correctly.
– The espresso or coffee lacks body.
Increase the amount of coffee so that
more ground coffee is brewed.
The amount of coffee is too high if:
– Espresso or coffee only trickles into
the cup.
^ Select "Brew temperature" and touch
OK.
– The crema is dark brown.
^ Select the required temperature and
touch "OK".
– The espresso or coffee tastes bitter.
The setting is now saved.
Decrease the amount of coffee so that
less ground coffee is brewed.
^ Select "Amount of coffee" and touch
OK.
28
Coffee the way you like it
Pre-brewing
When the pre-brewing function is
switched on, the freshly ground coffee
is first moistened with a little hot water.
Then the remaining water is forced
through the moistened coffee at high
pressure. This helps release the flavour
of the coffee.
You can set pre-brewing for a normal
length of time or an extra long length of
time. Alternatively, you can switch off
the " Pre-brewing " function.
The machine is supplied with the
"Pre-brewing" function switched off.
^ Select "Pre-brewing" and touch OK.
^ Select the setting you want and touch
OK.
The setting is now saved.
29
Portion size
The flavour of the coffee produced
depends not just on the type of coffee
used, but also on the amount of water
used.
You can programme the amount of
water to suit the size of your cups and
the type of coffee you are using.
For coffee drinks that use milk you can
also set the amount of milk or milk froth
to be dispensed. You can also set the
portion sizes for hot milk and milk froth
alone.
Each type of drink has a maximum
portion size that can be programmed
into the machine. The coffee machine
halts preparation of the coffee once this
portion size has been reached. The
maximum possible portion size for this
type of drink is then saved in the
machine.
There are two ways to start
programming the portion amount:
– Either by touching the drink sensor
when you are making a coffee, or
– by selecting "Portion size" from the
"Parameters" menu.
If the water container becomes
empty whilst making a drink, the
machine will stop programming the
portion size. The portion size will not
be saved.
Tip: To cancel changing the portion
size, touch the drinks sensor again, or
touch X for "Other drinks".
30
Changing portion size while
making a drink
Portion sizes for Espresso . and
Coffee /
^ Place the desired cup under the
central spout.
^ Touch . or / until "Change" appears
in the display.
The selected drink will now be made.
You can set the amount as soon as
"Save" appears in the display.
^ When the cup is filled up to the level
you want, touch OK.
The portion size programmed in will
now be dispensed every time that
particular drink is selected.
Portion size
Portion sizes for cappuccino and
latte macchiato
Portion sizes for caffé latte, hot milk
and milk froth
^ Place a suitable container
underneath the central spout.
^ Place a suitable container
underneath the central spout.
^ Touch H or k until the ingredients for
that drink are shown in the display.
^ Touch ,.
Cappuccino: milk froth, espresso
^ Select "Portion size" and touch OK.
Latte macchiato: hot milk, milk froth,
espresso
^ Select all the components you want
to change with the arrow sensors.
Confirm these individually with the
OK sensor.
A tick 9 before the ingredient shows
that it has been selected.
^ Select "Start" and touch OK.
The coffee machine will start
dispensing. You can now set the
portion size for each selected
component as soon as "Save" appears
in the display.
^ When the quantity for each ingredient
reaches the level you want, touch
OK.
^ Save the required portion size for the
selected components.
^ Select the drink you want.
You can change the amount of each
component for caffè latte (hot milk,
coffee) as described under "Portion
sizes for cappuccino and latte
macchiato".
For milk froth and hot milk, follow the
instructions described under "Setting
portion sizes for espresso and coffee".
Changing portion sizes in the
"Parameters" menu ,.
^ Touch ,.
^ Select the drink you want and touch
OK.
^ Select "Portion size" and touch OK.
Now proceed as for changing the
portion size during drink preparation
The programmed mix of ingredients
and portion sizes will now be
dispensed every time that particular
drink is selected.
31
Settings
Changing and saving settings
You can use the "Settings" menu to
customise the coffee machine to suit
your individual requirements.
^ Touch X and select "Settings".
Calling up the "Settings" menu
^ Select the required setting with the
arrow sensors and touch OK.
^ Touch X and select "Settings".
You can now check or change the
settings.
Options which are currently selected
will have a tick ( next to them.
Touch # if you want to access the
previous menu.
Touch X to return to the drinks
selection menu.
32
^ Use the arrow sensors to highlight
the required option.
^ Touch OK.
The setting is now saved.
Settings
Overview of available settings
The factory setting for each option is shown in bold.
Option
Available settings
Language
deutsch, english and other languages
Country
Time
Clock format
12 h / 24 h
Set
Timer
Set
Switch on at / Switch off after (1:00) / Switch off at
Activate
Switch on at (Yes / No) / Switch off at (Yes / No)
Eco mode
On / Off
Info
Number of drinks
Total portions / Espresso / Coffee / Cappuccino / Latte macchiato /
Caffè Latte / Milk froth / Hot milk
No. of uses until appliance needs descaling
No. of uses until brew unit needs degreasing
System lock
On / Off
Water hardness
Soft
Medium
Hard
Very hard
Display brightness
-
Showroom programme
Demo mode On/ Off
Factory default
Do not reset
Reset
33
Settings
Language
Timer
You can select a language and country
for all display texts.
The timer offers the following options:
Tip: If you select the wrong language
by mistake, you can find the
"Language" option by following the flag
symbol J.
Time
You can set the clock display and the
time of day.
Clock format
The options are:
– 24-hour display (24 h)
– 12-hour display (12 h)
Setting the time
Use the arrow sensors to set the hours
and minutes.
The coffee machine
– switches on at a particular time, e.g.
in the morning for breakfast ("Switch
on at").
– switches off at a particular time
("Switch off at").
– switches off after a particular length
of time if no sensors have been
pressed ("Switch off after").
For "Switch on at" and "Switch off at"
to be set, the timer must be
activated.
Switch on at
Please note that the coffee machine
will not switch on at the required time
if you have activated the system lock.
Use the arrow sensors to set the hours
and minutes.
If the coffee machine has switched
itself on three times via the "Switch on
at" timer function and no drinks have
been dispensed, the machine will not
switch itself on again automatically.
This prevents the coffee machine from
switching itself on unnecessarily, for
example whilst you are away on holiday.
34
Settings
The programmed times will, however,
remain in memory and will be
reactivated after manually switching the
machine on again.
Switch off at
Use the arrow sensors to set the hours
and minutes.
If you have not used the coffee
machine for a long time, the saved
times will be reactivated after manually
switching the machine on again (see
"Switch on at").
Switch off after
Eco mode
Eco mode is an energy-saving mode.
The steam system does not heat up
until a coffee drink or steam for hot milk
/ milk froth is requested.
If Eco mode is switched off, milk froth
and hot milk, as well as coffee and
espresso, can be made one after
another. The steam system remains
heated up and much more energy is
used.
The coffee machine will indicate that
the energy consumption has been
altered.
If none of the sensors has been
pressed or no drink has been
prepared, the coffee machine will
switch itself off after 30 minutes to save
energy.
Info (display information)
You can change this pre-setting using
the arrow sensors to a time of between
15 minutes and 9 hours.
You can also see whether more than 50
portions can be dispensed before the
machine needs to be descaled ("No. of
portions until descaling") or before the
brew unit needs to be degreased ("No.
of portions until degreasing").
Activating and deactivating the timer
When the system lock is activated,
the "Switch on at" option for the timer
cannot be selected.
The "Info" option allows to see how
many portions of each drink have been
made.
To return to the previous display:
^ Touch OK.
^ Select the timer function you want to
use.
The selected option will have a 9 next
to it.
^ Touch the X arrow sensor repeatedly
until " Accept " is highlighted.
Touch the OK sensor.
35
Settings
Locking the coffee machine
(System lock 0)
You can lock the coffee machine to
prevent it being used without your
knowledge, by children, for example.
Activating and deactivating the
system lock 0
When the system lock is activated,
the "Switch on at" option for the timer
will not work.
Overriding the system lock
While "To unlock, press OK sensor for 6
seconds" is showing in the display,
^ touch the OK sensor for 6 seconds.
As soon as you switch the coffee
machine off, the system lock will be
activated again and the coffee
machine is locked.
Water hardness
See "Setting up and using the coffee
machine" for information about water
hardness.
Display brightness
Change the display brightness using
the arrow sensors.
36
Factory default
You can reset the settings back to the
ones which were set when the coffee
machine was delivered.
Please refer to the "Overview of
available settings" chart for the factory
settings which are shown in bold.
The following settings will not be
reset:
- Language
- Time of day
- Number of drinks dispensed (Info)
- User profiles
- Portion size
Showroom programme (Demo
mode)
Do not activate this setting for
domestic use!
The coffee machine can be presented
in Miele galleries or stores with the
"Showroom programme". The machine
will switch on but drinks cannot be
dispensed and other actions cannot be
carried out.
If you activate the Demo mode, you
cannot switch the appliance off with
the On/Off sensor K.
Cleaning and care
Quick guide
Clean the coffee machine regularly to avoid a build-up of bacteria.
Recommended frequency
What do I have to clean / maintain?
Clean the water container
Daily
(before you turn the coffee machine
Clean the waste container
off)
Clean the drip tray and grille
Clean the stainless steel milk flash (not supplied with the
machine)
Weekly
(or more often for very heavy
soiling)
Clean the central spout with cappuccinatore
Clean the casing (particularly important after descaling the
machine)
Remove the brew unit and wash by hand
Approx. after 200 portions
Degrease the brew unit (with cleaning tablets)
Depending on the hardness of the
water
Descale the machine
As required
Clean the coffee bean container
Clean the ground coffee chute
Some parts of the coffee machine are dishwasher-safe. However, cleaning
these in the dishwasher frequently can cause them to become discoloured due
to regular contact with food residues (e.g. tomatoes) in the dishwasher. The
surface of these parts can also become damaged.
The following must only be cleaned by hand:
– Brew unit
– Central spout cover
– Water container lid
– Bean container lid
– Holder for drip tray cover (on the drip tray)
– Stainless steel milk flask (optional accessory, not supplied with machine)
37
Cleaning and care
,Danger of burning and scalding
on hot components or by hot liquids.
Always allow the coffee machine to
cool down before cleaning it.
Caution. Water in the drip tray can
be very hot.
Do not use a steam cleaner to clean
the coffee machine. Steam could
cause a short circuit.
To avoid damaging the surfaces of
your appliance, do not use:
– cleaning agents containing soda,
ammonia, acids or chlorides,
– solvent-based cleaning agents,
– cleaning agents containing
descaling agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
– oven cleaner,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– hard, abrasive sponges, e.g. pot
scourers, brushes or sponges which
have been previously used with
abrasive cleaning agents,
– melamine eraser blocks,
– sharp metal tools.
38
Rinsing the machine
After a coffee has been dispensed, the
machine is rinsed before it switches off.
This removes any residual coffee
grounds.
You can also rinse the machine
manually.
^ Touch X and select "Maintenance".
^ Select "Rinse appliance" and touch
OK.
The pipework will now be rinsed
through.
You may also be prompted to insert the
end of the milk pipe into the drip tray.
Cleaning and care
Milk pipework
Ensure that all components in which
milk is transported are cleaned on a
regular basis.
Milk naturally contains bacteria that
rapidly multiply if the milk pipework
is not cleaned properly. Soiling in
the appliance may be dangerous to
health.
Rinsing the milk pipework
Milk residue can clog up the milk pipes.
If a drink has been made using milk the
coffee machine will prompt you to rinse
the pipework when you switch the
machine off.
You can also rinse the milk pipework
manually.
^ Touch X and select "Maintenance".
^ Select "Rinse milk pipework" and
touch OK.
Cleaning the milk pipework
The milk pipework must be cleaned at
least once a week. The coffee machine
will prompt you when this needs to be
done.
^ Touch OK.
When you confirm the message
"Clean milk pipework" with OK, the
internal counter for the cleaning
interval will be reset.
You will not be reminded again.
There are two options:
– You can remove and dismantle the
central spout with its integrated
cappuccinatore and either wash it in
the dishwasher or by hand with hot
water and a little dishwashing liquid.
– Or you can clean the milk pipework
using the "Clean milk pipework"
maintenance programme together
Miele cleaning agent for milk
pipework.
^ When prompted, place the end of
the milk tube into the right-hand
aperture in the drip tray.
^ Touch OK.
The milk pipework will now be rinsed.
39
Cleaning and care
Cleaning the milk pipework with
Miele cleaning agent for milk
pipework
^ Touch X and select "Maintenance".
^ Select "Clean milk pipework".
The cleaning process cannot be
cancelled once it has started. The
process has to be completed through
to the end.
^ Touch OK.
The process will start.
^ Follow the instructions given in the
display.
^ Place the container next to the
machine and hang the milk pipe in
the solution. Make sure it is placed
sufficiently far into the cleaning
solution.
When the message "Place milk pipe in
cleaning agent" appears in the display
dissolve the cleaning agent in water:
^ Touch OK.
Making up the cleaning solution
The cleaning process is finished when
rinsing has finished.
The cleaning agent for milk pipework
has been specially developed for Miele
coffee machines. You can purchase it
from Miele or online at
www.miele-shop.com (depending on
country).
To prevent the risk of damage, only
use this cleaning agent with your
Miele coffee machine.
^ Dissolve the powder in a container
with 200 ml of lukewarm water. Stir
the solution with a spoon until it has
fully dissolved.
40
^ Follow the further instructions given in
the display.
Cleaning and care
The central spout with
cappuccinatore
Clean the central spout cover by hand
only using warm water and a little
washing-up liquid.
All other parts are dishwasher safe.
^ Twist upper section a with the holder
for the milk pipework and pull it off.
Then pull the Y-shaped piece b off.
Release the spouts c.
^ Clean all parts thoroughly.
^ Push the central spout right down
and remove the stainless steel cover
by pulling it off towards you.
^ Clean the surfaces of the central
spout with a damp cloth.
^ Pull the dispensing unit off towards
you.
41
Cleaning and care
If the milk pipe is blocked, clean it
under running water with the brush
supplied.
^ Insert the brush in the tube and move
it back and forth as far as it will go
until all milk residue has been
removed.
^ Fit the dispensing unit back together.
^ Push the dispensing unit back onto
the central spout. Press firmly to
ensure the spouts at the bottom
connect correctly with the edge of
the dispenser.
^ Replace the stainless steel cover and
connect the milk pipe if applicable.
Milk flask
(optional accessory, not supplied with
the machine)
The milk flask should be taken apart
and cleaned every day.
^ Clean all parts by hand only using
hot water and a little washing-up
liquid. Use the cleaning brush
supplied to remove milk residues
from the milk pipework if necessary.
^ Rinse all parts carefully under
running water. Residual washing-up
liquid can affect the taste of milk from
the machine and the quality of the
milk froth. Dry all parts afterwards.
^ Reassemble the milk flask.
42
Cleaning and care
Water container
Drip tray cover
Clean the water container lid by hand
only using hot water and a little
washing-up liquid.
^ Remove the drip tray cover from the
drip tray.
Change the water every day to prevent
a build-up of bacteria.
Make sure that the valve, the
underside of the water container and
the surface the water container sits
on are clean. Otherwise the water
container will not sit correctly.
^ The drip tray cover can be cleaned in
the dishwasher, or by hand using
warm water and a little washing-up
liquid.
^ Dry the drip tray thoroughly.
^ Press the lid on the right hand side.
^ Replace the drip tray cover making
sure that the aperture for the milk
tube is on the right hand side.
^ Pull the water container up by the lid
to remove it.
^ Take the lid off the container and
wash it by hand.
^ The water container can be cleaned
in the dishwasher, or by hand using
warm water and a little washing-up
liquid. After cleaning, dry the water
container.
^ Carefully clean and dry the surface
the water container sits on,
particularly the recesses.
^ Fit the lid back on the container.
43
Cleaning and care
Drip tray and waste container
^ Push the central spout up as far as it
will go.
Clean the drip tray and waste
container every day to avoid
unpleasant smells and mildew.
The waste container is located in the
drip tray. Water from rinsing also
collects in the waste container.
A prompt will appear in the display
when the drip tray and/or the waste
container is full and needs to be
emptied. Empty the drip tray and the
waste container.
Danger of burning!
If the rinsing process has just
finished, wait a while before
removing the drip tray as the water
used for rinsing will run out of the
coffee spouts.
a
b
c
^ Then pull the drip tray carefully out of
the machine. Take the lid off a.
^ Empty the drip tray and the waste
container.
^ Remove drip tray cover b and holder
c for the drip tray.
^ Clean all parts thoroughly.
Clean the drip tray holder by hand
only using hot water and a little
washing-up liquid. All other parts
are dishwasher-safe.
^ Clean the area underneath the drip
tray.
^ Reassemble all parts and place the
drip tray back in the coffee machine.
Make sure that the drip tray is
pushed right into the coffee machine
as far as it will go.
44
Cleaning and care
Bean container and ground
coffee chute
,Disconnect the coffee machine
from the power supply before
cleaning.
Tip: Use a vacuum cleaner to remove
any coffee residues from the bean
container and the ground coffee chute.
^ Open the bean container.
^ Remove any coffee beans.
Brew unit
,Disconnect the coffee machine
from the power supply before
cleaning.
Clean the brew unit by hand only
using warm water. Do not use
washing-up liquid.
The moving parts of the brew unit
are lubricated. Washing-up liquid
will damage the brew unit.
^ Clean the bean container with a dry,
soft cloth.
Clean the brew unit once a week.
The bean container can now be refilled.
Removing and cleaning the brew unit
by hand
If necessary, clean the ground coffee
chute:
^ Open the ground coffee chute.
^ Remove any ground coffee.
The brew unit can be removed for
cleaning. To do this:
^ Open the door.
^ Press the button under the handle of
the brew unit a and, whilst doing so,
turn the handle to the left b.
^ Carefully pull the brew unit out of the
coffee machine.
45
Cleaning and care
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (See
"Problem solving guide").
^ Push the brew unit back into the
coffee machine, making sure it goes
in straight.
After taking the brew unit out of the
machine do not change the position
of the brew unit handle, as this
would cause the brew unit to be out
of alignment and you will not be able
to push it back into the coffee
machine.
^ Clean the brew unit by hand under
warm running water without using
washing-up liquid.
^ Press the button under the handle of
the brew unit a and, whilst doing so,
turn the handle to the right b.
^ Close the machine door.
^ Wipe any remaining coffee off the two
filters. One filter is located in the
funnel and the other to the left of the
funnel.
^ Dry the funnel to prevent ground
coffee sticking to it the next time a
coffee is prepared.
^ Clean the inside of the coffee
machine. Use your vacuum cleaner
to remove dry coffee grounds.
To replace the brew unit, repeat the
previous steps in the reverse order:
46
Cleaning and care
Degreasing the brew unit
Depending on the natural oil content of
the coffee used, the brew unit can
become blocked quite quickly. Use the
cleaning tablets supplied with the
coffee machine to clean the brew unit.
^ Follow the instructions given in the
display.
When "Place a cleaning tablet in the
ground coffee chute and close the
chute" appears in the display:
Degrease the brew unit regularly
with the Miele cleaning tables
supplied. This ensures you can
continue to make aromatic coffees
and guarantees trouble-free
operation of your coffee machine.
The cleaning tablets for degreasing the
brew unit have been specially
developed for Miele coffee machines.
You can purchase the Original Miele
cleaning tablets at
www.miele-shop.com (depending on
country) or from Miele.
^ Place a cleaning tablet into the coffee
chute.
After 200 portions have been
dispensed, "Degrease the brew unit"
will appear in the display.
The cleaning process is finished when
rinsing has finished.
^ Follow the further instructions given in
the display.
^ Touch OK.
This message will not go out until the
brew unit has been degreased.
To degrease the brew unit:
^ Touch X and select "Maintenance".
^ Select "Degrease the brew unit".
The cleaning process cannot be
cancelled once it has started. The
process has to be completed through
to the end.
^ Touch OK.
The process will start.
47
Cleaning and care
Housing
External surfaces may suffer
discolouration or damage if soiling is
left on them for too long. Remove
soiling immediately.
Make sure that water cannot get
behind the display.
All external surfaces are susceptible
to scratching and can suffer
discolouration if they come into
contact with unsuitable cleaning
agents.
Wipe up any spillages or splashes
of descaling agent immediately.
^ Switch the coffee machine off.
^ Clean the front of the machine with a
solution of warm water and a little
washing-up liquid applied with a soft
sponge. Then dry all parts with a soft
cloth.
Tip: You can also clean the appliance
front with the Original Miele all purpose
microfibre cloth.
48
Descaling
When descaling the machine, cover
delicate surfaces and natural
flooring to prevent damage from
splashes of descaling solution.
Ensure that any splashes of
descaling solution are wiped up immediately.
Limescale builds up in the coffee
machine through use. How often the
appliance needs to be descaled will
depend on the water hardness level in
your area. The machine should be
descaled regularly to ensure that it
functions correctly.
The machine will guide you through the
descaling process. Various messages
will appear in the display, e.g. you will
be prompted to empty the drip tray or
fill the water container.
Descaling after prompt
appears in the display
The descaling programme cannot be
cancelled once you have touched
OK. The programme has to be
completed through to the end.
To start the descaling programme
straight away:
^ Touch OK.
The process will start.
^ Follow the instructions given in the
display.
When "Fill water container with
lukewarm water and descaling agent
up to the F symbol and replace it"
appears in the display, proceed as
follows:
Descaling must be carried out.
Make up the descaling solution
The coffee machine prompts you when
it needs to be descaled. "No. of
portions until appliance needs
descaling: 50" appears in the display.
Each time a drink is prepared, the
coffee machine displays the number of
portions remaining until descaling must
be carried out.
The descaling tablets supplied have
been specially designed for Miele
coffee machines. They can be
purchased at www.miele-shop.com
(depending on country) or from Miele.
^ Touch OK.
When the number of remaining portions
reaches 0, the machine will lock out.
Then "Descale appliance" will appear in
the display.
You can switch off the coffee machine if
you do not want to descale it at this
point in time. However, you will be not
be able to make any more drinks until
descaling has been carried out.
You will need 1 descaling tablet to
descale the machine.
Only use the Original Miele
descaling tablets supplied with the
machine. Other descaling tablets
may damage the coffee machine
and affect the taste of the coffee.
^ Fill the water container to the F
symbol with lukewarm water.
49
Descaling
^ Place 1 descaling tablet in the water.
Ensure that you adhere to the mixing
ratio for the descaling tablets. It is
important that you do not fill the
water container with less water than
prescribed. The descaling
programme will otherwise be
cancelled prematurely.
^ Replace the water container.
^ Follow the further instructions given in
the display.
When "Fill the water container with fresh
tap water up to the descaling symbol
F" appears in the display:
^ Carefully rinse the water container
with clean water. Ensure that no
descaling solution residue remains in
the water container. Fill the water
container to the F symbol with fresh
tap water.
The descaling programme is finished at
the end of the rinsing cycle and drinks
can be made again.
To protect the machine and
surrounding surfaces from damage,
make sure you wipe up any
spillages or splashes of descaling
agent immediately.
The water container and the drip tray
should be cleaned carefully after
descaling in order to remove any
descaling residue.
50
Descaling when not prompted
by a message:
^ Touch X and select "Maintenance".
^ Select "Descale the appliance".
The descaling programme cannot be
cancelled once you have touched
OK. The programme has to be
completed through to the end.
^ Touch OK.
The descaling process will now start.
Problem solving guide
Most problems that occur during daily use can be easily corrected. With the help
of the following guide, you will be able to find the causes of problems and rectify
them.
,Important! Do not open the outer casing of the machine.
Repairs must only be carried out by a Miele approved service technician.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work.
If you can't remedy the problem yourself, please call Miele. Please note that a
call-out charge will be applied to unnecessary service visits where the problem
could have been rectified as described in these operating instructions.
Messages in the display
Error messages must be confirmed with "OK", otherwise the message can
reappear in the display even though the problem has been remedied.
^ Follow the instructions which appear in the display to remedy the problem.
^ If the fault message appears in the display again, contact Miele.
Message
Possible cause and remedy
F1, F2
F80, F82
There is an internal fault.
^ Switch the machine off with the On/Off - sensor. Wait for 1
hour before switching it back on again.
F 41, F 42
F 74, F 77
F 235, F 236
There is an internal fault.
^ Switch the machine off with the On/Off - sensor. Wait for 2
minutes before switching it back on again.
51
Problem solving guide
Message
Possible cause and remedy
"Too much ground There is too much ready ground coffee in the ground coffee
coffee"
chute.
If more than one level scoop of ground coffee is added to the
coffee chute, the brew unit cannot process the coffee. The
ground coffee will be directed into the waste container and
the fault message will appear in the display.
^ Switch the machine off with the On/Off - sensor.
^ Remove and clean the brew unit (see "Cleaning and care –
Brew unit").
^ Remove the ground coffee inside the coffee machine, e.g.
with a vacuum cleaner.
^ Use the coffee scoop supplied to add ground coffee to the
ground coffee chute. Add only one portion of ground
coffee to the chute.
52
Problem solving guide
Message
Possible cause and remedy
F73
or
"Check the brew
unit"
The brew unit cannot be positioned correctly.
^ Switch the machine off with the On/Off - sensor.
^ Remove and clean the brew unit (see "Cleaning and care –
Brew unit").
^ Push the coffee ejector of the brew unit into the correct
position (see diagram).
^ Do not fit the brew unit. Close the front of the machine and
switch the machine on with the On/Off - sensor.
This will initialise the brew unit motor and put it back into the
start position.
^ When "Insert the brew unit" appears in the display, open
the front of the machine and put the brew unit back in the
machine.
Then close the door.
53
Problem solving guide
Unusual performance of the coffee machine
Problem
Possible cause and remedy
The lighting
remains off after
the coffee
machine has
been switched on.
The lighting has been switched off.
^ Switch the lighting on (see "Settings - Lighting").
The display
remains dark after
the coffee
machine has
been switched on
using the On/Off
- sensor.
The On/Off - was not touched for long enough.
^ Touch the On/Off - sensor for at least 3 seconds.
The lamp is defective.
^ Call Miele Service.
The master switch is pointing to "0".
^ Set the master switch to the "I" position.
The plug is not inserted in the socket correctly.
^ Insert the plug into the socket correctly.
The main fuse has tripped because of a problem with the
coffee machine, the electricity supply or another appliance.
^ Switch off at the wall socket and unplug it.
^ Contact a qualified electrician or Miele.
The coffee
The switch-off time programmed using the timer has been
machine switches reached.
off suddenly.
^ If required, you can select a new switch-off time (see
"Settings - Timer").
The plug is not inserted in the socket correctly.
^ Insert the plug into the socket correctly.
The sensors do
There is an internal fault.
not react to touch. ^ Disconnect the machine from the electricity supply by
The appliance
switching off at the wall socket and withdrawing the plug,
cannot be
or switching off the mains fuse.
operated.
54
Problem solving guide
Problem
Possible cause and remedy
The coffee
machine does not
switch itself on,
although the
"Switch on at"
setting has been
activated for the
timer.
The system lock has been activated.
^ You need to deactivate the system lock (see "Settings System lock").
The machine was not used after being switched on
automatically three times in succession.
^ Switch the machine on and dispense a drink.
The display is
The display brightness has been set too low.
hard to see or not ^ Change this setting (see "Settings - Display brightness").
able to be read.
"Fill and replace
the water
container"
appears in the
display even
though the water
container is full
and in the
machine.
The water container is not in the correct position.
^ Remove the water container and replace it.
"Fill and replace
the water
container"
appears after
switching on even
though the
container is filled
and fitted in the
machine.
The appliance
does not rinse.
The coffee machine needs descaling.
^ Switch the machine off with the On/Off - sensor. Wait
approx. 1 hour.
Neither milk nor
milk froth comes
out of the central
spout.
The water container was not correctly filled and replaced for
descaling.
^ Fill the water container to the descaling symbol F and
restart the descaling programme.
^ Then switch the machine on again. As soon as "Heating-up
phase" appears in the display, touch x and select
"Descale the appliance".
^ Descale the coffee machine.
The milk pipework is blocked.
^ Clean the central spout, taking particular care to clean the
cappuccinatore and milk pipes carefully with the cleaning
brush.
55
Problem solving guide
Problem
Possible cause and remedy
"Empty the drip
tray" appears in
the display, even
though the drip
tray is empty.
The drip tray is not positioned correctly in the machine.
^ Push the drip tray in as far as it will go.
Drink preparation
has been
cancelled.
^ Make sure the holder for the drip tray cover is correctly
located on the drip tray.
If the water container becomes empty while a drink is being
made, the message "Water container empty. Continue? Yes /
No" will appear in the display after the water container has
been refilled and put back in the machine. If you do not
confirm this message with "Yes" within 5 minutes, preparation
will be cancelled.
This is not a fault.
The coffee
machine does not If the coffee machine still has an operating temperature
higher than 60°C , rinsing will not take place.
rinse itself when
turned on.
The display lights The demo setting of the coffee machine for showrooms or
up but the coffee dealers has been activated.
machine does not
^ Deactivate the demo mode (see "Settings - Demo mode").
heat up and no
drinks are made.
The coffee
machine cannot
be turned off with
the On/Off button
-.
"Fill the bean
container"
appears in the
display even
though the bean
container is full.
This is not a fault.
^ Confirm the message with "OK".
Drink dispensing Condensate may have built up on the control panel and
starts even though accidentally started the process.
a sensor has not
^ Wipe any condensate off with a soft cloth.
been touched.
56
Problem solving guide
Problem
Possible cause and remedy
Milk is dripping or The level of milk in the milk flask is higher than the central
running out of the spout.
central spout even
^ Push the central spout up as far as it will go.
though no milk is
being dispensed.
The descaling
programme was
started by
mistake.
The descaling programme cannot be stopped once the OK
sensor has been touched.
Descaling must be continued through to completion. This is
a safety precaution to make sure the machine is descaled
correctly.
Loud noises are
heard during the
descaling
programme.
This is not a fault.
These noises occur when water is flushed through the
machine at a high pressure.
The heating-up
time is getting
longer, the
amount of water
being dispensed
is incorrect and
the coffee
machine is not
performing
properly.
The coffee machine needs descaling.
^ Descale the coffee machine (see "Descaling").
Coffee or
Espresso is not
flowing out of the
central spout, or
coffee is only
being dispensed
via one spout.
The central spout has a blockage.
^ Clean the coffee pipework (see "Cleaning and care Rinsing the machine).
^ If, having rinsed the machine, Espresso or coffee still
cannot be dispensed or only flows out of one spout,
^ Dismantle the central spout and clean all parts carefully
(see "Cleaning and care - Central spout with integrated
cappuccinatore").
^ Make sure all parts are reassembled correctly.
57
Problem solving guide
Problem
Possible cause and remedy
After switching
the machine a
message appears
prompting you to
empty the drip
tray and the waste
container even
though they are
empty.
This is not a fault.
The drip tray and waste container was probably not emptied
after making the last coffee, or the internal counter was not
reset.
58
^ Remove the drip tray and waste container from the
machine and empty them.
Problem solving guide
Unsatisfactory results
Problem
Possible cause and remedy
The consistency of The milk temperature is too high. Good milk froth can only
the milk froth is
be achieved when cold milk (below 13°C) is used.
unsatisfactory.
^ Check the temperature of the milk.
The milk pipework is blocked.
^ Clean the central spout with integrated cappuccinatore
and the milk pipework with the cleaning brush.
The coffee grinder The coffee bean container has become empty during the
makes a louder
grinding process.
noise than usual. ^ Fill the container with fresh beans.
There may be stones in amongst the coffee beans.
^ Switch the coffee machine off immediately. Call Miele.
Espresso or coffee The coffee is too coarsely ground.
flows into the cup ^ Set the grinder to a finer setting (see "Setting the coffee
too quickly.
grinder").
Espresso or coffee The coffee is too finely ground.
flows into the cup ^ Set the grinder to a coarser setting (see "Setting the coffee
too slowly.
grinder").
The cup has not been pre-heated.
The coffee or
espresso is not hot
The brewing temperature has been set too low.
enough.
^ Set a higher brewing temperature (see "Brewing
temperature").
The filters in the brew unit are blocked.The filters in the brew
unit are blocked.
^ Remove and clean the brew unit by hand (see "Cleaning
and care – Brew unit").
^ Degrease the brew unit (see "Cleaning and care - Brew
unit").
59
Problem solving guide
Problem
Possible cause and remedy
The crema on the The grinder setting is not correct.
coffee or espresso ^ Set the grinder to a finer or coarser setting (see "Setting
is not as it should
the coffee grinder").
be.
The brewing temperature is too high for this type of coffee.
^ Set a lower brewing temperature (see "Brewing
temperature").
The coffee beans are no longer fresh.The coffee beans are
stale.
^ Add fresh coffee beans to the coffee bean container.
60
Transporting the machine
If you are not going to use the coffee
machine for an extended period of
time, e.g. whilst on holiday, or if it
needs to be moved, a number of
procedures will need be carried out to
ensure its safety.
Please carry out the following:
,Caution. Danger of burning and
scalding from hot steam coming out
of the hot water spout.
The evaporation process is finished
when "Process finished" appears in the
display.
– Empty and clean the coffee bean
container
^ Switch the machine off with the
master switch and at the wall socket.
– Empty and clean the water container
– Evaporate the coffee machine
^ Clean the drip tray and waste
container.
– Clean the drip tray and waste
container
The coffee machine is now ready to be
packed.
– Pack the machine securely
Evaporating the coffee
machine
The coffee machine should be
evaporated before it is stored for a long
period of time or transported any
distance - particularly at temperatures
below freezing.
Evaporating the machine involves
removing all traces of water from the
system to prevent the risk of water and
frost damage.
^ Switch the machine off with the
On/Off - sensor.
Packing the machine
The coffee machine should only be
packed when it is clean and dry.
Residues of coffee grounds can cause
scratches on surfaces. Coffee and milk
residues or water can cause a build-up
of bacteria.
Use the original packaging including
polystyrene blocks to pack the coffee
machine.
Also pack the operating instructions so
that they are available when the coffee
machine is next used.
^ Touch #.
^ Touch ° twice.
The evaporation process starts, the
coffee machine heats up and "Empty
the system" appears in the display.
^ Follow the instructions given in the
display.
61
After Sales / Guarantee
In the event of a fault which you cannot
correct yourself, or if the machine is
under guarantee please contact:
– your Miele Dealer
or
– Miele
Contact details for Miele are given at
the end of this booklet. N.B. A
call-out charge will be applied to service visits where the problem could
have been resolved as described in
these instructions.
When contacting Miele, please quote
the model and serial number of your
machine. This information is given on
the data plate located behind the drip
tray in the machine.
Guarantee
Guarantee: U.K.
In the U.K, the appliance is guaranteed
for 2 years from the date of purchase.
However, you must activate your cover
by calling 0845 365 6640 or registering
online at .
Guarantee: Other countries
For information on the appliance
guarantee specific to your country
please contact Miele.
See end of this booklet for contact
details.
62
Saving energy
If the default settings for "Eco mode" or
the "Timer" have been altered, energy
consumption will increase.
The message " This setting uses more
energy" will appear in the display.
Switch the machine off with the
master switch and at the wall socket.
If the coffee machine is not going to be
used for a longer period of time, e.g.
whilst on holiday, switch it off with the
master switch and at the wall socket.
63
Electrical connection
All electrical work should be carried
out by a suitably qualified and
competent person only, in strict
accordance with current national and
local safety regulations (BS 7671 in the
UK).
Installation, repairs and other work by
unqualified persons could be
dangerous. The manufacturer cannot
be held liable for unauthorised work.
Ensure power is not supplied to the
machine until after installation work has
been carried out.
The voltage and connected load are
given on the data plate located on the
appliance behind the drip tray. Please
ensure these match the household
mains supply. The fuse rating is quoted
on the plug.
The machine is supplied with a mains
cable with moulded plug for connection
to a 50 Hz, 220-240 V mains supply.
Connection should be made via a fused
plug and suitable switched socket
which is easily accessible after
installation.
Do not connect via an extension lead or
an adapter. These do not guarantee the
safety of the machine (e.g. danger of
overheating).
For extra safety it is advisable to protect
the machine with a suitable residual
current device (RCD). Contact a
qualified electrician for advice.
If the socket is not accessible after
installation (depending on country) an
additional means of disconnection must
be provided for all poles.
64
Do not connect the machine to an
inverter such as those used with an
autonomous energy source e.g. Solar
power.
When switched on peak loads in the
system can cause the safety switch off
mechanism to be triggered. This can
damage the electronic unit.
The machine must not be used with
so-called Energy saving devices either.
These reduce the amount of energy
supplied to the machine causing it to
overheat.
WARNING: THIS APPLIANCE
MUST BE EARTHED
Non-rewireable plugs BS 1363
The fuse cover must be refitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
Tip: If the mains connection cable is
too long, push it up through the
opening at the back of the machine.
Installation
Please observe the following installation
instructions:
Danger of overheating.
Please ensure that there is adequate
ventilation around the machine.
Do not cover the machine with tea
towels or similar objects whilst it is in
use.
Danger of overheating.
If the coffee machine is installed
behind a kitchen furniture door, it
may only be used with the furniture
door open. Do not close the furniture
door while the coffee machine is in
use.
If the machine is installed in a niche,
the niche must provide the following
minimum dimensions:
Height
508 mm
Width
450 mm
Depth
555 mm
When setting up the machine: make
sure that the front of the machine
can be fully opened so that the brew
unit can be removed with ease when
required.
^ The machine must be set up in the
niche such that it sits flush with the
front edge of the niche.
– The location of the machine must be
dry and well ventilated.
– The ambient temperature of the room
in which the machine is used must
be between +10 °C and +38 °C.
– The machine must be set up on a
level surface. The surface must be
water resistant.
65
Appliance dimensions
66
Technical data
Current draw in standby mode
(default setting)
< 0.5 Watt
Pump pressure:
max. 15 bar
Through-flow heater:
1 stainless steel thermo block
Appliance dimensions (W x H x
D):
251 x 359 x 427 mm
Net weight
9.9 kg
Connection cable length:
140 cm
Water container capacity:
1.8 l
Bean container capacity:
300 g
Stainless steel milk flask
capacity:
0.5 l
Waste container capacity:
max. 10 portions of coffee grounds
Central spout:
Height adjustable from 80-140 mm
Grinder:
Stainless steel mill
Grinder setting:
5 settings
Ground coffee amount:
max 12 g
67
68
69
70
8QLWHG.LQJGRP
-IELE#O,TD
&AIRACRES-ARCHAM2OAD
!BINGDON/XON/847
4EL
#USTOMER#ONTACT#ENTRE4EL
%MAILINFO MIELECOUK
)NTERNETWWWMIELECOUK
$XVWUDOLD
-IELE!USTRALIA0TY,TD
!".
'ILBERT0ARK$RIVE+NOXFIELD6)#
4EL&AX
)NTERNETWWWMIELECOMAU
&KLQD
-IELE3HANGHAI4RADING,TD
&LOOR.O3HI-EN9I2OAD
*INGgAN$ISTRICT
3HANGHAI02#
4EL&AX
%MAILINFO MIELECN)NTERNETWWWMIELECN
0LHOH+RQJ.RQJ/LPLWHG
&-ANHATTAN0LACE
7ANG4AI2OAD
+OWLOON"AY(ONG+ONG
4EL&AX
%MAILMIELEHK MIELECOMHK
,QGLD
-IELE)NDIA0VT,TD
'ROUND&LOOR#OPIA#ORPORATE3UITES
0LOT.O*ASOLA
.EW$ELHI
4EL&AX
%MAILCUSTOMERCARE MIELEIN)NTERNETWWWMIELEIN
,UHODQG
-IELE)RELAND,TD
"IANCONI!VENUE
#ITYWEST"USINESS#AMPUS$UBLIN
4EL&AX
%-AILINFO MIELEIE)NTERNETWWWMIELEIE
0DQXIDFWXUHU -IELE#IE+'
#ARL-IELE3TRA”E'àTERSLOH'ERMANY
0DOD\VLD
-IELE3DN"HD
3UITE,EVEL
-ENARA3APURA+ENCANA0ETROLEUM
3OLARIS$UTAMAS.O*ALAN$UTAMAS
+UALA,UMPUR-ALAYSIA
0HONE
&AX
1HZ=HDODQG
-IELE.EW:EALAND,IMITED
#OLLEGE(ILL
&REEMANS"AY!UCKLAND.:
4EL&AX
)NTERNETWWWMIELECONZ
6LQJDSRUH
-IELE3OUTHEAST!SIA
-IELE0TE,TD
0ENANG2OAD
¬7INSLAND(OUSE))
3INGAPORE
4EL&AX
%-AILINFOSEA MIELECOMSG
)NTERNETWWWMIELESG
6RXWK$IULFD
-IELE0TY,TD
0ETER0LACE"RYANSTON
0/"OX"RYANSTON
4EL&AX
%MAILINFO MIELECOZA
)NTERNETWWWMIELECOZA
8QLWHG$UDE(PLUDWHV
-IELE!PPLIANCES,TD
0/"OX
'OLD$IAMOND0ARK
3HEIKH:AYED2OAD
"UILDING/FFICES.OSTO
$UBAI
4EL
&AX
%-AILINFO MIELEAE
)NTERNETWWWMIELEAE
71
CM 6100
en - GB
M.-Nr. 09 732 130 / 03