Motorola SBG6580 Series User guide

Add to my manuals
2 Pages

advertisement

Motorola SBG6580 Series User guide | Manualzz

Gateway Label

Place

Label

Here

bottom of your SBG6580.

• Model - Gateway model name. network. Recommended that you change wireless networks. add additional wireless devices to your wireless network. service provider may require this number to activate your gateway. require the Media Access Control (MAC) number to activate your gateway.

Notes

Write your additional wireless network information here for

future reference.

SSID #1:

Wi-Fi Security Key #1:

SSID #2:

Wi-Fi Security Key #2:

SSID #3:

Wi-Fi Security Key #3:

SSID #4:

Wi-Fi Security Key #4:

Additional SSIDs:

Add’l Wi-Fi Security Keys:

© 2014 ARRIS Enterprises, Inc. All rights reserved

.

No part of the contents of this document may be reproduced or transmitted in any form or by any means without written permission from ARRIS Enterprises, Inc.

ARRIS SURFboard, and the ARRIS logo are all trademarks or registered trademarks of ARRIS Enterprises, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and the names of their products. ARRIS disclaims proprietary interest in the marks and names of others. MOTOROLA and the

Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used by ARRIS under license. All other product or service names are the property of their respective owners.

594496-001-c 07/2014

4

SURFboard

®

SBG6580

Wireless Cable Modem Gateway

Quick Start Guide

Items In the Box

SBG6580 Wireless

Gateway

Power Supply

Ethernet Cable

What You Should Know Before Getting Started

This startup guide will help you install your SURFboard ® SBG6580 Wireless Cable Modem

Gateway and set up a secure wireless network connection. There are three SBG6580

Connection Video Tutorials available if you need additional help setting up your gateway.

You can access the videos online at the ARRIS Support website,

www.arrisi.com/consumer, (follow the prompts) or from your mobile device; just text SBG6580 to 878787 or scan the QR code:

For information on advanced wireless network configurations, see the SBG6580 User Guide which is available online at the ARRIS

Support website. Frequently asked questions (FAQs) and additional product documentation are also available on the support website.

Software License &

Warranty Card

Quick Start Guide

IMPORTANT! You must have a live broadband cable connection installed before starting your gateway installation. If you do not, please contact a service provider for assistance.

When contacting your service provider, you may be asked for the Model name

(SBG6580), HFC MAC ID, and Serial number (S/N) located on the gateway label on the bottom of your SBG6580 (see page 4).

BEFORE RETURNING THIS PRODUCT TO THE STORE for any reason, please call ARRIS

Technical Support for assistance:

1-877-466-8646

Install the Gateway

Note: You may need additional items that are not included with your

SBG6580 (coaxial cable or RF splitter) to complete your gateway installation.

1. Connect the coaxial cable from the cable wall outlet or RF splitter

(optional) to the Cable connector on the rear of the SBG6580.

Use your hand to tighten each connector to avoid damaging them.

2. Connect the Ethernet cable to the Ethernet port on your computer and to an available Ethernet port on the rear of your SBG6580.

3. Connect the power cord to the Power port on the rear of the SBG6580 and then plug it into an electrical wall outlet.

This automatically powers ON your SBG6580. Check the front panel

LEDs on your SBG6580. During the initial startup, the Power, Receive,

Send, and Online LEDs should light up. See Front Panel LEDs for more

LED information.

Test the Gateway Connections

1. Power ON your computer and log in.

2. Contact your service provider to activate (provision) your SBG6580.

Note: Your service provider may allow for automatic activation which will automatically launch a special website when you open a web browser. If

so, continue with step 3. Otherwise, contact your service provider.

3. Open a web browser on your computer, such as Internet Explorer, Firefox,

Google Chrome, or Safari.

4. Type a valid URL (for example, www.arrisi.com) in the address bar and then click or press Enter.

The website should open.

If it did not open, please contact your service provider to set up your Internet service or activate your SBG6580.

Front Panel LEDs

During normal operation, the Power, Receive, Send, and Online LEDs on the SBG6580 front panel should always be lit. The Wireless LED will light up when a wireless connection is made on your home network. If an LED did not light up, contact your service provider for assistance.

Power - Lit SOLID when power is connected

Receive - Lit SOLID when locked on a downstream channel

Send - Lit SOLID when locked on an upstream channel

Online - Lit SOLID when connected to the network

Wireless - Lit SOLID when wireless pairing with all devices is complete; Amber LED will FLASH when WPS is active

WPS Pairing button

2

Set Up a Wireless Network Connection

Choose one of the following two options to set up your wireless network connections. When done, continue with Test Your Wireless Network

Connection .

• Computer Wireless Network Options

• WPS Pairing Button

A

Set Up the Wireless Network on Your

Computer

depending on the operating system installed on your computer. The following steps apply to Windows ® 7.

1. From the Windows taskbar, click the following in sequential order:

• Start button

• Control Panel

• Network and Sharing Center

• Set up a new connection or network

• Manually connect to a wireless network

The Wireless Network Connection window displays.

2. Type the ARRIS wireless network name or a different name to identify your wireless network in the number listed on the gateway label.)

3. Select the network security type from the Security type drop-down list.

4. Select the Encryption type from the drop-down list.

5. Type your own wireless network password in the Security Key field (or use the Wi-Fi Security key listed on the gateway label).

6. Select Hide characters to hide your password for security purposes.

7. Select Start this connection automatically.

8. Click Next to complete the wireless network connection. The

Successfully added message should display.

9. Close the Wireless Network Connection window.

B

Use the WPS Pairing Button

Note: To use Wi-Fi Protected Setup™ (WPS), your computer must support

WPS and also have WPA security compatibility.

The WPS option automatically assigns a random SSID wireless network name and Wi-Fi Security Key to connect your SBG6580 and other WPS-enabled wireless devices to your wireless network.

1. Power ON your SBG6580 and other WPS-enabled wireless devices that you want to connect to your wireless network.

2. Press the WPS button on the SBG6580 front panel.

3. Press and hold the WPS button on your WPS-enabled computer or other

4. Repeat steps 2 and 3 for each additional WPS-enabled wireless device.

3

Test Your Wireless Network Connection

1. If connected, disconnect the Ethernet cable from your computer and

SBG6580.

2. Open a web browser on your computer.

3. Type a valid URL in the address bar (for example, www.arrisi.com) and then click or press Enter.

If the website did not open, please contact your service provider.

Start the Gateway Web Manager

Use the SBG6580 Web Manager to set up and manage your wireless gateway and network security configurations.

1. Open a web browser on the computer connected to your SBG6580.

2. Type 192.168.0.1 in the address bar, and press Enter.

3. Type the default user name: admin.

4. Type the default password: motorola .

5. Click Login to open the SBG6580 Web Manager .

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Maximum data transfer rate: 444.928 Mbit/s
  • Networking standards: IEEE 802.11n
  • DC-in jack
  • Power requirements: (105 - 125)VAC, 60Hz/(100 - 240)VAC, (50 - 60)Hz

Related manuals

Download PDF

advertisement