Mitsubishi Electric LT-2240 Technical information

LOW VOLTAGE AIR CIRCUIT BREAKERS
630AF~6300AF
12A
Mitsubishi Presents the WS Series, Satisfied with
the High Demands of the 21st Century Global Market.
Best-Solution
Various line-up and
high flexibility
1
High-Performance
One-rank higher
breaking performance
High-Reliability
Customer F riendly
Safety and reliability provided
Easy handling and
retrofitted solution
Contents
■
Product Features
■
Appearance and Product structure
■
Product Specification
■
Connections
■
Charging
■
Accessories
For breaker unit
For drawout type
■
Electronic trip relay
Feature
For general use: WS
For generator protection use: WM
For special use: WB
For protective coordination use: WF
Accessories
Additional functions
Network
Electronic trip relay circuit diagram
Setting procedure
■
Wiring diagram
■
Outline dimensions
Drawout type
Fixed type
Panel-cut,Drawout handle,Terminal adapter
Neutral CT,External ZCT
UVT/ETR external units
■
Technical information
■
Ordering information
■
Service network
Line up ( 630 to 6300A )
Rated current (A)
630
1000
1250
1600
2000
AE630-SW AE1000-SW AE1250-SW AE1600-SW AE2000-SWA
SW series
—
2500
3200
4000
6300
—
AE2000-SW AE2500-SW AE3200-SW AE4000-SWA
—
5000
—
AE4000-SW AE5000-SW AE6300-SW
2
■ Best Solution
Through Flexible and Various Options,
To be Built up the Suitable Functions.
Electronic Trip Relay
Main setting module
1
With interchangeable & add-on modules, flexible functions built up.
WS1
WS2 General use
WS3
WM1
Generator
WM2 protection use
WM3
LTD +STD+INST / MCR
WB1
WB2 Special use
WB3
LTD +STD +INST / MCR
INST / MCR
Note : *For optimum protective coordination with upstream and/or downstream protective devices such as fuses
and OCRs, WF relay (WF1/WF2/WF3) are provided.
As for the details about WF relay, please make inquiries.
2
Optional setting module
With optional setting modules, GFR, ER etc are added easily.
G1
E1
AP
N5
3
Ground fault
protection (GFR)
Earth leakage (ER)
(1)
Neutral pole (2)
50% protection
2nd Additional Pre-alarm
Note (1) : Combination with ZCT
(2) : With "N5" optional module, Neutral pole protection will be changed from 100% (standard) to 50%.
1
Power supply
3
It is neccessary for Display and
LEDs. (see page 19, 20.)
2
P1
100-240V AC•DC
P2
24-60V DC
P3
100-240V AC / 100-125V DC with output contact
P4
24-60V DC with output contact
P5
100-240V DC with output contact (SSR)
Additional function
EX1
Extension module
DP1
Display
TAL
Temperature alarm
The TAL is operated by an
unusual temperature of the
breaker contacts.
(see page 32)
Module for display and
communication
■ Protection with power from Internal CT
The Over current protection and Ground
fault protection can work with power from
Internal CT, even if the control power
source is off. For the Trip indicator LED
and the additional functions like EX1,
DP1/DP2, TAL and Network, the control
power source is required.
Current,Voltage,Power,
Harmonics,Trip current,etc.
Note : The VT unit is required to
display the measured data
except the load current.
MCR switch
Making current release is
possible with MCR switch.
(see page 32)
■ Secure protection by actual effective value detection
For spread of electronic devices such as inverter, the actual effective
value detection method is adopted, which is strong against deformed
waveform and is detected from each phase independently .
Distorted
current
Effective value
conversion
Sin wave
current
3
MCR-SW
Network
By using various application software for PLC, users can also connect to the network
SCADA system.
Personal
Computer
MELSECNET/10
Interface card
MELSECNET/10
CC-Link® / PROFIBUS-DP / MODBUS®
Interface
Unit
PLC
I/O Unit
Eco Monitor Pro
ME96NSR
MDU
AE-SW
Note : Some device types are excluded.
Interface unit
CC-Link®
I/O unit
PROFIBUS-DP
MODBUS®(RS-485)
BIF-CON
ON, OFF, Spring charge, Digital input
Option to interface unit
I/O unit enables to turn ON/OFF the breaker
and the spring charge via network.
And by addition of the drawout position
switch, it is possible to transmit the breaker
drawout position.
BIF-CC
BIF-PR
BIF-MD
Display unit for Panel board
Communication items
Current, Voltage*, Power*, Harmonics*, etc.
Measurement / Alarm
It has the same function as the breaker
display unit (DP1).
In the case where the breaker is installed
in the panel, it becomes possible to view
the measurement information from the
outside of the panel board.
Tripping cause, Tripping current
Alarm (PAL, TAL, Self diagnosis, etc.)
ON and OFF by CC and SHT
Breaker remote control
Spring charge by MD
ON or OFF or Charge state
Breaker status
DP2
Note : The VT unit is required to display the measured
data except the load current.
Drawout position
ETR Setting value
VT unit
Note*: VT unit is required to display the measured data except load current.
VT
VT unit enables to measure voltages,
electric powers, harmonics and etc.
Electronic Trip Relay type code
Additional function
Extension module(EX1)
● Main setting module
● Optional setting module
G1: Ground fault protection
WS1, WB1, WM1, WF1 AE630–1600-SW,
AE2000–3200-SW,
N5: Neutral pole 50% protection
AE4000-SW
E1: Earth leakage protection
WS2, WB2, WM2, WF2 AE2000-SWA,
AE4000-SWA,
AP: 2nd Additional Pre-alarm
AE5000-SW
NA: Without optional setting
WS3,WB3,WM3,WF3 AE6300-SW
WS : General use
● ETR Auxiliary Equipment
WM : Generator protection use
Temperature alarm(TAL)
WB : INST only
MCR switch(MCR-SW)
WF : Protective coordination use
● Power supply
P1: 100-240V AC•DC
P2: 24-60V DC
P3: 100-240V AC / 100-125V DC
with output contact
P4: 24-60V DC with output contact
P5: 100-240V DC
with output contact (SSR)
Display(DP1)
Display onto panel board(DP2)
VT unit(VT)
Network
BIF-CC
BIF-PR
BIF-MD
Wire system (when EX1 is specified)
3φ3W
3φ4W
EX1
Normal connection
Reverse connection
4
■ High-Performance High-Reliability
The safety of valuable circuits can be securely maintained.
Higher short circuit protection performance
by improving breaking capacity
Wide coordination range by improving rated
short-time withstand current
In case of 690V AC, Icu = Ics improved
from 50 kA to 65 kA for AE630-SW~AE2000-SWA
from 50 kA to 75 kA for AE2000-SW~AE4000-SWA
from 50 kA to 85 kA for AE4000-SW~AE6300-SW
Icw (1s) improved
from 65 kA to 75 kA for AE2000-SW~AE4000-SWA
from 85 kA to 100 kA for AE4000-SW~AE6300-SW
(Former model)
AE630-SW
(AE630-SW~AE2000-SWA)
(Former model)
(AE2000-SW~AE4000-SWA)
(Former model)
690V AC
65
600V AC
65
AE2000-SWA ~ 500V AC
65
(AE4000-SW~AE6300-SW)
(Former model)
AE630-SW
AE1000-SW
AE1250-SW
AE1600-SW
AE2000-SWA
AE1000-SW
AE1250-SW
AE1600-SW
AE2000-SW
AE2500-SW
AE3200-SW
AE4000-SWA
690V AC
75
600V AC
75
AE2000-SW
AE2500-SW
AE3200-SW
AE4000-SWA
~ 500V AC
85
690V AC
85
(Former model)
(AE4000-SW~AE6300-SW)
65
1s
60
2s
50
3s
1s
75
2s
75
3s
65
100
1s
AE4000-SW
AE5000-SW
(AE2000-SW~AE4000-SWA)
AE4000-SW
85
600V AC
AE5000-SW
AE6300-SW
2s
85
3s
85
AE6300-SW
~ 500V AC
130
0
20
40
60
80
100
120
140
(kA)
Icu=Ics
0
20
40
60
Higher safety by improving insulation
performance
Rated impulse withstand voltage (Uimp) for the main circuit is improved
from 8 kV to 12 kV.
(Former model)
Higher reliability by High operating durability
■ Mechanical
AE-SW series are sharply improved in mechanical durability
compared to the former model.
10,000
25,000
AE630-SW AE1000-SW
AE1250-SW AE1600-SW
25,000
AE2000-SWA
10,000
20,000
AE2000-SW AE2500-SW
AE3200-SW
5,000
20,000
AE4000-SWA
2,000
10,000
AE4000-SW AE5000-SW
AE6300-SW
0
5
5,000
(3-Pole)
10,000
15,000
20,000
25,000
(times)
Former model
AE-SW series
(AE-SW series)
80
100
(kA)
Icw
■ Customer Friendly
Convenience for Customer
3 sizes
Compact size AE2000-SWA!
■ The compact AE2000-SWA can reduce the panel size.
Size1
AE630 AE1000 AE1250 AE1600 AE2000
-SW
-SW
-SW
-SW
-SWA
Volume and weight
Size2
AE2000 AE2500 AE3200 AE4000
-SW
-SW
-SW
-SWA
Size3
AE4000 AE5000 AE6300
-SW
-SW
-SW
AE2000-SS
(Former model)
Replacement from the former model (AE-SS)
■ Due to the same installation dimension and outline
AE2000-SWA
Bus bar
Interchangeable
dimension, the former model (AE-SS) can be replaced with
AE-SW series.
■ On the replacement of Drawout type, the Drawout fame
(Cradle) for AE-SS have to be replaced with one for AESW.
■ AE-SW can be installed to the existing connection bus bar
without any special connection kit.
(Except AE2000-SWA and AE4000-SWA)
Former model (AE-SS)
(AE-SW)
Replacement from the old model (AE-S)
Reverse connection available
For the replacement from the old model (AE-S), the special
adapter for AE-SW is prepared. (It is available for Drawout
type only.) For details, please contact us separately.
Line and Load is not defined on the Main circuit terminals.
Therefore, reverse connection is available without any
limitation.
Zero arc space
Arc exhaust to the outside of the breaker is drastically reduced
for safer operation.
(For AE630-SW~AE4000-SWA models, 600V AC or less)
(refer to page 56 : Insulation distance)
6
Fixed type
AE-SW Series
1 Arc extinguishing chamber
2
2 Control circuit terminal block
1
3 Electronic trip relay
3
4 OFF button
9
5 ON button
4
5
6 Padlock hook
6
7 Charging indicator
8
8 ON/OFF indicator
7
9 Manual reset button(Optional)
AE1600-SW 3P
In case of the fixed type,Lifting hooks (HP) are attached.
Drawout type
AE-SW Series
2
1
1 Cradle
3
2 Control circuit terminal block
3 Lifting hole
4 Charging handle
5 Drawout position indicator
4
6 Extension rail
7 Position lock
6
7
9 Drawout handle
8
5
9
AE1600-SW 3P
7
8 Aperture for the drawout handle
In case of the drawout type, Drawout handle is attached.
Skeleton
8
10
9
3
4
5
6
7
30
31
29
26
27
24
25
2
1
12
28
11
13
14
15
16
21
17
18
20
1 Air circuit breaker
12 Dust cover (DUC) P16
2 Cradle
13 Push button cover (BC-L) P15 23 Cylinder lock (CYL) P15
3 CC-Link® Interface unit P4 P35 14 Auxiliary switch
4 PROFIBUS-DP Interface unit P4 P35
22
5 MODBUS® Interface unit P4 P35
23
24 Door interlock (DI) P15
standard (AX) P14
25 Mechanical interlock (MI) P16
15 Auxiliary switch
high capacity type (HAX) P14 26 Safety shutters (SST) P18
16 Shunt trip device (SHT) P13
6 I/O unit P4 P35
19
22 Counter (CNT) P15
7 Extension module P3 P33 P34 17 Closing coil (CC) P13
27 Safety shutter lock (SST-LOCK) P18
28 Cell switch (CL) P17
18 Under voltage trip device (UVT) P14 29 Interphase Barrier (BA) P15
8 ETR unit P3 P19~P28
9 Main setting module P3 P19~P27 19 UVT-controller (U-CON) P14
30 Horizontal terminal P11
10 Optional setting module P3 P29~P32 20 Condenser trip device (COT) P16 31 Vertical terminal P11
21 Motor charging device (MD) P12
11 Door frame (DF) P15
Product configuration
1
2
Type
AE630-SW
AE1000-SW
AE1250-SW
AE1600-SW
AE2000-SWA
AE2000-SW
AE2500-SW
AE3200-SW
AE4000-SWA
AE4000-SW
AE5000-SW
AE6300-SW
3
Standard
IEC 60947-2
EN 60947-2(CE)
VDE
JIS C 8201-2-1
GB 14048.2(CCC)
(Marine Approvals)
LR
GL
BV
DNV❋
ABS
CCS❋
NK
❋Except
6
Push button cover
Counter
Cylinder lock
Terminal cover
Door frame
Dust cover
Interphase barrier
Mechanical interlock
Door interlock
Connection
Drawout type
Horizontal terminal
Vertical terminal
Front terminal
5
Drawout type
accessories
Cell switch
Shorting b-contact
Lifting hooks
Safety shutter
Safety shutter lock
Mis-insertion preventor
Test jumper
Electrical
accessories
Auxiliary switch
Motor charging device
Closing coil
Shunt trip device
Under voltage trip device
Condenser trip device
Fixed type
AE4000-SW~AE6300-SW
7
Mechanical
accessories
4
8
Electronic
trip relay
General use
WS type
Generator protection use
WM type
Special use
WB type
Protective coordination use
WF type
Optional
G1:Ground fault protection
E1:Earth leakage protection
AP:2nd Additional Pre-alarm
N5:Neutral pole 50% protection
9
Relay
accessories
Extension module
Display
Temperature alarm
MCR switch
Neutral CT
External ZCT
VT unit
Network
CC-Link® Interface unit
PROFIBUS-DP Interface unit
MODBUS® Interface unit
I/O unit
8
●
Specification
Type
AE630-SW
AE1000-SW
AE1250-SW
AE1600-SW
630
1000
1250
1600
(A)
Frame size
Rated insulation voltage (Ui)
(50/60Hz)(AC.V)
1000
Rated operational voltage (Ue)
(50/60Hz)(AC.V)
690
(kV)
12
Rated impulse withstand voltage (Uimp)
Pollution degree
3
Number of poles
3, 4
Rated current In (CT rating)
WS WB
General use
Current rating adjustable
0.5 to 1.0 × In 0.05 step
(
Current setting Ir (A) (40˚C)
WM
)
Generator protection use
(Current rating fixed) (Note 10)
Rated current of neutral pole
1000
500-550-600-650700-750-800-850900-950-1000
160 ≤ Ir ≤ 630
400 ≤ Ir ≤ 1000
800 ≤ Ir ≤ 1250
1000 ≤ Ir ≤ 1600
630
1000
1250
1600
(A)
Ultimate breaking capacity
Icu (kA rms)
IEC60947-2
EN60947-2
BS
VDE
JIS C 8201-2-1
630 (Note 5)
315-346.5-378-409.5441-472.5-504-535.5567-598.5-630 (Note 5)
1250
690V AC
65
600V AC
65
240-500V AC
65
690V AC
65
600V AC
65
with MCR
240-500V AC
65
690V AC
25 (Note 1)
Bare +
External relay
25 (Note 1)
500V AC
Rated service breaking capacity Ics (kA rms) %Icu
100%
690V AC
143
600V AC
143
240-500V AC
143
690V AC
143
600V AC
143
Rated making capacity
Icm (kA peak)
with MCR
240-500V AC
143
690V AC
52.5
500V AC
1s
52.5
2s
60
Bare or Bare +
External relay
Rated short time withstand current
Icw (kA rms)
65
3s
50
Maximum total breaking time
(ms)
Maximum closing time
Number of operating
cycles
(Note 2)
Connecting terminal
40 (Note 6)
(ms)
With rated
current
1600
625-687.5-750-812.5800-880-960-1040875-937.5-1000-1062.5- 1120-1200-1280-13601125-1187.5-1250
1440-1520-1600
80
500V AC In
5,000
690V AC In
5,000
Without rated current
25,000 (Note 4)
Horizontal terminal
Vertical terminal
Front terminal
Outline dimension (mm)
H×W×D
Fixed type
Drawout type
3-pole
410×340×290
4-pole
410×425×290
3-pole
430×300×368
4-pole
Weight (kg)
(without Accessory)
430×385×368
3-pole
40
41
42
4-pole
50
51
52
Drawout type
3-pole
63
64
65
(including cradle)
4-pole
77
78
79
Cradle only
3-pole
Fixed type
26
4-pole
Marine approval
30
(LR, GL, BV, DNV, ABS, NK, CCS)
3-pole
(Note 1) This is the Icu value when the bare main body and the external relay are combined.
(Note 2) The number of operating cycles without rated current also include the number of operating cycles with rated current.
(Note 3) AE2000-SWA, AE4000-SWA and AE4000-SW~AE6300-SW apply for only vertical terminal of connecting terminal.
(Note 4) This value is max. operating cycle for just ACB body not including any accessories.
(The max. operating cycles for the accessories like AX, MD,CC, SHT and UVT are half of this value.)
(Note 5) Products with low rating types is available.
AE 630-SW
3 kinds of products with low rating types is available.
250-275-300-325-350-375-400-425-450-475-500(CT 500A)
• 157.5-173.3-189-204.8-220.5-236.3-252-267.8-283.5-299.3-315(CT 315A)
• 125-137.5-150-162.5-175-187.5-200-212.5-225-237.5-250(CT 250A)
•
9
AE 2000-SW
2 kinds of products with low rating types is available.
800-880-960-1040-1120-1200-1280-1360-1440-1520-1600(CT 1600A)
• 625-687.5-750-812.5-875-937.5-1000-1062.5-1125-1187.5-1250(CT 1250A)
•
AE2000-SWA
AE2000-SW
AE2500-SW
AE3200-SW
AE4000-SWA
AE4000-SW
AE5000-SW
AE6300-SW
2000
2000
2500
3200
4000
4000
5000
6300
2000
2000 (Note 5)
1000
1000
690
690
12
12
3
3
3, 4
3, 4 (HN, FN) (Note 7)
2500
3200
4000
4000
1000-1100-1200-1300- 1000-1100-1200-1300- 1250-1375-1500-1625- 1600-1760-1920-2080- 2000-2200-2400-26001400-1500-1600-1700- 1400-1500-1600-1700- 1750-1875-2000-2125- 2240-2400-2560-2720- 2800-3000-3200-34001800-1900-2000
1800-1900-2000 (Note 5)
2250-2375-2500
2880-3040-3200
3600-3800-4000
1250 ≤ Ir ≤ 2000
800 ≤ Ir ≤ 2000
1600 ≤ Ir ≤ 2500
2000
2000
2500
2000 ≤ Ir ≤ 3200
2500 ≤ Ir ≤ 4000
3200
4000
2500 ≤ Ir ≤ 4000
1,500
1,500
4000 ≤ Ir ≤ 6300
85
85
85
130 (Note 9)
75
85
75
85
75
100
45 (Note 1)
65 (Note 1)
45 (Note 1)
65 (Note 1)
100%
100%
165
187
165
187
187
286
165
187
165
187
165
220
94.5
143
94.5
143
75
100
75
85
65
85
40 (Note 6)
50 (Note 6)
80
1,000
500
1,000
500
1,000
1,000
20,000 (Note 4)
10,000 (3P) / 5,000 (4P)
-
-
-
(Note 3)
(Note 3)
-
(Note 3)
-
-
410×475×290
414×873×290
410×605×290
414×1003(1133)×290 (Note 8)
430×435×368
430×439×368
480×875×368
430×565×368
430×569×368
480×1005(1135)×368 (Note 8)
47
60
61
63
81
57
72
73
75
99
70
92
93
95
108
84
113
114
116
136
31
35
36
49
35
43
44
61
(LR, GL, BV, DNV, ABS, NK, CCS)
(Note 6)
3150 ≤ Ir ≤ 5000
75
80
1,500
6300
2000 (4000) (Note 8) 2500 (5000) (Note 8) 3150 (6300) (Note 8)
75
1,500
5000
2000-2200-2400-2600- 2500-2750-3000-3250- 3150-3465-3780-40952800-3000-3200-3400- 3500-3750-4000-4250- 4410-4725-5040-53553600-3800-4000
4500-4750-5000
5670-5985-6300
This value means the instantaneous breaking time at shortcircuit interruption.
As for accessories (SHT, UVT), refer to page 13 and 14.
(Note 7) 4(HN) means the neutral poles current capacity is 50% of the rated current, for 4 poles.
4(FN) means the neutral poles current capacity is 100% of the rated current, for 4 poles.
(Note 8) ( ) shows the value for 4P FN type.
(Note 9) Marine approval value is 138kA.
(Note 10) For WM relay, the current setting Ir can be set by 1A except AE630-SW low rating types "CT315A"
and "CT250A". In case of AE630-SW with "CT315A" and "CT250A", it can be set by 0.1A.
160
160
160
180 (200) (Note 8) 180 (200) (Note 8) 180 (200) (Note 8)
233
233
240
256 (279) (Note 8) 256 (279) (Note 8) 263 (286) (Note 8)
118
118
125
133 (148) (Note 8) 133 (148) (Note 8) 140 (155) (Note 8)
(NK, LR, GL, BV, ABS)
(Remark) All models conform the isolating function according to IEC 60947-2.
Reverse connection is possible.
10
Over view (AE630~1600-SW, AE2000~3200-SW)
Connections
Type
Horizontal
Standard
Vertical
(VT)
Front
(FT)
Vertical terminal
adapter
(VTA)
Front terminal
adapter
(FTA)
FIX-VTA
FIX-FTA
DR-VTA
DR-FTA
Fixed type (FIX)
Drawout type (DR)
DR-VT
DR-FT
● Connection image : AE630~1600-SW, 3-pole type
Over view (AE2000-SWA, AE4000-SWA, AE4000~6300-SW)
Connections
Vertical
(VT)
Type
Standard
Fixed type (FIX)
FIX-VT
Drawout type (DR)
DR-VT
● Connection image : AE2000-SWA, 3-pole
type
● For AE2000-SWA, AE4000-SWA, AE4000SW, AE5000-SW and AE6300-SW models,
vertical terminal only is available.
Available connections
Breakers
Connections
Horizontal
Fixed type
(FIX)
FIX-VT
FIX-VTA
FIX-FTA
Horizontal
DR-VT
Drawout type
DR-FT
(DR)
DR-VTA
DR-FTA
11
AE630-SW
AE1000-SW AE1250-SW AE1600-SW AE2000-SWA AE2000-SW AE2500-SW AE3200-SW AE4000-SWA AE4000-SW AE5000-SW AE6300-SW
Manual charging
The closing spring is charged by the manual charging handle. The breaker is closed
when the ON button is pressed, and opened when the OFF button is pressed.
● When the closing spring is completely charged, the charging indicator will show
"CHARGED".
● The indicator shows the ON or OFF state of the main contacts.
● The breaker cannot be closed while the OFF button is being pressed. (Safety design)
● OFF lock is available by padlock (See P7, P17) as standard.
Motor charging device (MD)
The closing spring is charged by an electric motor. When the breaker is closed, the
spring is charged automatically (ON-charge method.) The closing coil (CC) is required
to remotely close, and the shunt trip device is required to remotely open the breaker.
1
● Manual charging operation is also possible.
● Pumping prevention is assured both electrically and mechanically.
● As the charging completion contact is separate from the electrical charging circuit, its
function in the control scheme can be arranged as desired.
Charged
signal
Charging completion
switch
413
414
Charging limit
switch
U1
Control
supply
z
M
U2
Motor
Control
relay
Motor charging circuit
Breaker
OFF charging method
Polarity of DC circuit use
U1
+
U2
–
Axb
Control
supply
OFF charging method is also available.
The closing spring is charged
automatically when the breaker is
opened. This is available only by
externally connecting b contact (AXb) of
the auxiliary switch to the motor
charging circuit in series.
In case of DC power supply, please use
high capacity auxiliary switch (HAX).
U1
U2
For 24V DC and 48V DC, the Diode rectifier
is not included.
Motor charging rating
Rated
voltage
(V)
Inrush
Applicable
Applied
voltage
Current
voltage
time
range
(Peak value)
(V)
(s)
(V)
(A)
DC24
18 ~ 26.4
DC48
36 ~ 52.8
AC/DC
85 ~ 137.5
100-125
AC/DC
170 ~ 275
200-250
24
48
100
125
200
250
22
14
10(10)
12(12)
5(7)
6(8)
< 0.4
< 0.4
AC: < 0.45
DC: < 0.25
AC: < 0.45
DC: < 0.25
Criterion for
Steady Charging
power
current
time
requirement
(A)
(s)
(VA)
6
3
3(4)
3(4)
1(2)
1(2)
500
≤5
700
1000
700
1000
Values in parentheses show values for AE4000-SWA 4 pole and AE4000-SW ~
AE6300-SW.
We cannot manufacture AE4000-SWA 4 pole and AE4000-SW ~ AE6300-SW in DC
24V and DC 48V rating.
Charging completion contact rating
Current (A)
Voltage (V)
AC
DC
460
250
125
250
125
30
Resistance load
5
10
10
3
10
10
Inductive load
2.5
10
10
1.5
6
10
12
2
3
6
5
4
4
7
1
9
8
Closing coil (CC)
2
The closing coil is a device to close the breaker by remote control.
● An interlock to prevent pumping is provided electrically.
Rated voltage
(Applicable voltage range)
Operating voltage • Operating inrush current (VA)
24-48V DC
(18~52.8)
100-250V AC • DC
common
(75-275)
AC
DC
–
24V DC 3.0A (100W)
CC circuit diagram
Breaker
Closing
time (Note1)
CC unit
A1
–
48V DC 6.0A (200W)
100V AC 0.7A (100VA)
100V DC 0.8A (100W)
250V AC 1.7A (200VA)
250V DC 1.8A (250W)
CC
Control
supply
0.08 s
or less
Note 1) In case of double rating of rated voltage, it is the value for the lower rating.
One-pulse
circuit
A2
Diode rectifier is not used for control source 24~48V DC.
(Example) In case of 24-48V DC, it is operating time for 24V DC.
● Closing time means time from the initial energization of the closing coil up to the complete closing of the main contacts.
● As CC is one-pulse driven, it is not necessary to insert AXb for burning prevention purposes. Inserting AXb will cause
anti-pumping function to be ineffective.
Shunt trip device (SHT)
3
The shunt trip device is a device to open the breaker by remote control. A cut-off switch is included.
SHT circuit diagram
Operating voltage • Operating inrush current (VA) Operating
Rated voltage
time (Note1)
(Applicable voltage range)
AC
DC
24-48V DC
(16.8~52.8)
–
–
48V DC 6.0A (200W)
100-250V AC • DC
common
(70-275)
100V AC 0.4A (100VA)
100V DC 0.6A (100W)
250V AC 1.4A (150VA)
250V DC 1.6A (200W)
380~500V AC
(266~550)
380V AC 0.5A (250VA)
500V AC 0.7A (300VA)
-
(Example) In case of 24-48V DC, it is operating time for 24V DC.
Note 2) Operating time for AE4000-SW~AE6300-SW is 0.05s or less.
Cut-off switch
SHT unit
C1
0.04 s
or less
Note 1) In case of double rating of rated voltage, it is the value for the lower rating.
13
Breaker
24V DC 2.5A (100W)
Control
supply
C2
SHT
Diode rectifier is not used for control source 24~48V DC.
Under voltage trip device (UVT)
4
This is the device that automatically trips the breaker when the circuit voltage drops below the
nominal voltage, and comprises UVT coil and UVT controller. There are 3 kinds of tripping time,
INST, 0.5s and 3.0s. A trip terminal for forced OFF function is included as standard equipment.
Rated voltage
Frequency
operating time
(time delay)
Pick-up
voltage
100-120V AC
200-240V AC
50/60Hz
65~85V
45~70V
130~170V
90~140V
Trip function
24V DC
-
100-110V DC
65~85V
45~70V
120-125V DC
78~102V
54~84V
UVT circuit diagram
Power
consumption
D1
UVT
controller
~
Inst(0.2s) 247~323V 171~266V With open
circuit of
0.5s(Min.) 15.6~20.4V 10.8~16.8V DT1,DT2
3.0s(Min.) 31.2~40.8V 21.6~33.6V terminals.
380-460V AC
48V DC
Drop-out
voltage
D2
Steady : 20VA
Inrush : 200VA
⬉ 0.4S
100-120V AC
24V DC
Inrush:100VA ⬉ 1S
UVT
coil
Trip button
DT1
DT2
max.2m
Breaker
UVT circuit diagram (In case of 380~460V AC)
IN1
Note1) In case of 380-460V AC, the external unit is attached additionally.
~
Note2) The operating time is a guarantee value when it drops from 85% or more of rated voltage.
OUT3
IN2
Note3) Time delay should be allowed for 1.5s between applying the voltage to the UVT and
closing the breaker.
D1
External unit
(attached to
UVT controller)
UVT
controller
OUT4
D2
UVT
coil
Trip button
DT1
Note4) If a remote trip function is required, remove the shorting bar (DT1 DT2) and connect a
normally closed switch, rated 0.5A at 150VDC across them.
DT2
max.2m
Note5) If a forced trip function is used, the shorting (signal input to DT1 and DT2) sould be held
for 0.2 sec. and more.
Breaker
reset type
OCR alarm (AL) [ Automatic
Short-time operation (30ms) ]
5
OCR alarm (AL) is provided as standard if ETR is equipped. OCR alarm (AL) is the contact (1a) of
short-time operation (30ms), being output when the breaker is tripped by the electronic trip relay.
Two types of automatic reset type (standard) and manual reset type (optional) are available. When
ordering, specify either automatic reset or Manual reset.
Switch rating
Current (A)
Voltage (V)
AC
DC
Resistive load
Inductive load
240
3
2
125
5
3
240
0.2
0.2
125
0.4
0.4
30
4
3
97
OCR alarm
switch
98
Note1) Though the control power supply is unnecessary to activate OCR
alarm (AL), the self-holding circuit is necessary since the contact
output is activated for the short time (30ms).
Note2) This works when tripping occurs in LTD, STD, INST, GFR or ER.
Note3) If any continuous output of OCR alarm (AL) is necessary, use the
trip indicator (TI) output contact of the electronic trip relay.
OCR alarm (AL) [MRE : Manual reset type]
On the manual reset type (optional), the gray manual reset button on the front side of the breaker
will stick out to continuously output OCR alarm (AL) if the breaker is tripped by the electronic trip
relay. After tripping, the breaker can not be turned on unless the manual reset button is pressed for
resetting.
Auxiliary switch
Standard (AX) • High capacity type (HAX)
This is the contact that remotely indicates the ON or OFF status of the breaker.
Switch rating
Min. load range graph
Current (A)
Voltage (V)
AC
DC
High capacity type (HAX)
Standard (AX)
Resistive load
Inductive load
Resistive load
Inductive load
250
10
10
10
10
125
10
10
10
10
250
0.3
0.3
3
1.5
125
0.6
0.6
10
6
30
10
6
10
Maximum contacts
5a5b
10
• HAX (High capacity)
• Charging comletion contact
• Cell switch
AC:DC
• AX (Standard)
• OCR alarm (AL)
• Shorting b-contact (SBC)
125
100
60V 50mA
60
Voltage (V)
6
30V 26mA
30
10
5a5b
5
Change-over
sequence
Breaker state
ON
OFF
a-contact (NO)
ON
OFF
b-contact (NC)
OFF
ON
5V 160mA
0.67 1
4
26
Current (mA)
50
100 160
5V 600mA
600
● The a and b conacts may turn simultaneously to ON instantaneously at the time of changing the contact;
Pay attention to the contact state when designing circuits.
● The chattering time at the time of contact ON-OFF is below 0.025 s.
14
Push button cover (BC-L)
7
The cover prevents careless manual operation (ON,OFF) of the push buttons.
BC-L can be locked by a padlock (The padlock should be supplied by the customer.)
For the suitable size of a padlock, refer to Page 17.
Cylinder lock(CYL)
8
The breaker is locked OFF with the cylinder lock.
● Since it is an interlock which only allows the key to be removed when the breaker is locked off, it can be used
for interlocking two or more breakers.
Counter(CNT)
9
The open/close operations of the breaker are shown by a 5 digit counter.
Door frame(DF)
The door frame improves the appearance, after cutting out the panel door to install the breaker.
As for panel cut-out dimensions, refer to page 51.
Door interlock(DI)
The panel door cannot be opened unless the breaker is open position.
● A wire type mechanical interlock allows flexibility in positioning breakers in the switchboard.
● The parts of the Door panel should be supplied by the customer.
● DI can not be installed by combining with "Mechanical interlock(MI)for 3 breakers."
Interphase Barrier(BA)
This enhances the interphase insulation between the terminal portions of the breaker, and prevents
short-circuit due to conductive inclusion or dust. It can be attached and detached easily. As for its
availability, refer to the following table.
Type
Connections
Horizontal (FIX)
Vertical terminal (FIX-VT)
Vertical terminal adaptor (VTA)
Front terminal adaptor (FIX-FTA)
Horizontal (DR)
Vertical terminal (DR-VT)
Drawout type
Front terminal (DR-FT)
(DR)
Vertical terminal adaptor (VTA)
Front terminal adaptor (DR-FTA)
Fixed type
(FIX)
● Available for the insulation
AE630-SW~
AE2000-SW~
AE4000-SW~
AE4000-SWA
AE2000-SWA
AE1600-SW
AE3200-SW
AE6300-SW
●
●
▲
▲
–
▲
▲
▲
▲
●
●
▲
▲
●
▲
▲
▲
–
▲
▲
▲
▲
▲ Available for separating terminals
Not existing type
– Attachment is impossible
Terminal Cover(TTC)
The transparent terminal cover prevents from careless touching to the live control terminals.
Protection degree is IP20.
15
Mechanical interlock (MI)
This is the device to prevent parallel charge of 2 or 3 units of breakers, and it can interlock the
breakers mechanically without fail.
All combinations are available among any models from AE630-SW to AE6300-SW.
Please make inquiries about installation to AE4000-SW~AE6300-SW.
Further the interlock is possible among the different connection types or poles, such as fixed type or
drawout type, 3 pole or 4 pole.
In combination with electric interlock, the higher safety interlock system can be secured.
● In case of drawout type,the interlock works at "CONNECTED" position, and in another position the
interlock is released, which assures easy maintenance and inspection of the breaker.
● When turning OFF one breaker and then turning ON another breakers, please take an interval 0.5 seconds or
more.
● MI for 3 breakers can not be installed by combining with Door Interlock (DI).
Breaker layout(630AF-4000AF)
Interlock combinations
(mm)
Vertical installation
Case circuit
Switching states (for 2 ACBs)
Type
Horizontal installation
1
2
3
: ACB open
: ACB closed
ACB1
ACB1
ACB2
ACB1
ACB2
ACB3
ACB1
ACB2
ACB3
ACB1
ACB2
ACB3
ACB2
0~12
2 devices : 1 normal power supply and 1 emergency power supply
144
Switching states (for 3 ACBs)
Type
2
3
4
5
6
7
ACB2
1000(Max.)
1000(Max.)
ACB3
1000(Max.)
3 devices : 2 sources and 1 coupling
Type
1
3
2
4
ACB1
ACB2
1000(Max.)
ACB3
1000(Max.)
3 devices : 3 sources,only 1 device closed
Type
1
3
2
4
5
ACB1
ACB2
ACB3
3 devices : 2 normal power supplies and 1 emergency power supply
Condenser trip device (COT)
Even if the power supply fails, the breaker can be electrically opened by remote operation
within a definite time. This device is used in combination with the shunt trip device (SHT).
● Outline dimensions (mm)
Type
Rated input voltage (V DC)
COT110-W
COT220-W
100/110
200/220
140/155
Condenser
trip device
820
Voltage range
45
Note1
Condenser capacity (μF)
φ10
4
70~125%
Power supply capacity (VA)
Max. 1
Charging time (s)
Max. 1
Trip limit time (s)
2-φ8
2-M6 Mounting screw
50-60
Rated frequency (Hz)
Rated charging voltage (V DC)
17
45
Breaker
1
ACB1
134
φ100
47(Max.)
Note2
Withstand voltage (1minute)
Applicable SHT type (Rated voltage)
30
2000V AC
100-250V AC . DC
As for outline dimensions, refer to page 51.
Note 1: The rated charging voltage is the voltage stored during
condenser saturation. It is continuously supplied by the
rectified voltage of the rated AC input voltage.
Note 2: The trip limit time means the time period in which the shunt trip
device (SHT) can make a tripping operation once, even after
the charged condenser with 100% supply voltage would be
stopped to charge. It can be tripped up to 30 seconds.
Note 3: Usage ambient temperature is in a range of max. 40°C to min.
-20°C.
R6
4-
75
14
16
4-M4 screw
(for wiring)
45
87
110.5
Front view
45
110
Side view
Drilling plan
Transformer (In case of COT220-W)
AC1
DC+
Open button
R1
C
R3
R2
AC2
Diode (In case of 100/110V)
LED
DC-
C1
SHT
C2
Circuit diagram
(mm)
Dust cover (DUC)
Dust cover prevents the dust or water entering into the panel board from the breaker panel cut.
Protection degree is IP54.
16
Drawout interlock (standard equipment)
This is the safety device that prevents insertion and drawout operation. When the breaker is ON, the
drawout handle cannot be inserted, and insertion and drawout operation cannot be done unless the
OFF button is pressed.
2
Position lock (standard equipment)
This is the device that locks automatically the drawout mechanism at "TEST" or "CONNECTED"
positions during insertion and drawout operation. When the lock plate is pushed in, lock is released
and operation can be continued.
Padlock
φ5
A padlock can be arranged at the lock plate. Thereby, it is possible to prevent the connection
position from being changed unnecessarily. A padlock of φ5 should to be supplied by customer. As
for outline dimensions of the padlock, please refer to the left figure.
35
(mm)
Outline dimensions
(reference)
Operating position of drawout type
CONNECTED position
● Both main and control circuits
are connected.
● Normal in use condition.
● Lock plate is protruding
TEST position
DISCONNECTED position
● Main circuit is disconnected, but
the control circuit is connected.
● The breaker operation can be
tested with the door closed.
● Lock plate is protruding
DRAWOUT position
● Both main and control circuits
are disconnected.
● This is the position for removing
the breaker.
● The door can be closed.
● The breaker is drawn out of the
cradle on the extension rails.
Cell switch (CL)
This is the switch to show the drawout position (CONNECTED, TEST, and DISCONNECTED) of
the breaker. An arbitrary combination up to 4 pieces is available.
Operating sequence
Switch rating
Drawout position
of breaker
Disconnected
DISCON
CL-C
(CONNECTED)
CL-T
(TEST)
CL-D
(DISCONNECTED)
TEST
CONNECT
OFF
ON
ON
OFF
Note 1: The setting is available for change by customer later.
A preliminary setting of CL at factory shipment is as follows.
CL1:1C CL2:1C1D CL3:1C1T1D CL4:2C1T1D
17
DC
Inductive load
10
10
250
3
1.5
125
10
6
30
10
10
125
ON
OFF
Resistive load
250
AC
Change-over sequence
(a-contact)
Switch function
Display position of
drawout operation
Current (A)
Voltage (V)
Connected
Maximum contacts
Total 4c max.
Standard pattern
CL-C
CL-T
CL-D
CL1
1
–
–
CL2
1
–
1
CL3
1
1
1
CL4
2
1
1
Shorting b-contact (SBC)
When moving the breaker from the connected to the test positions, this contact is used to short
circuit auxiliary switch (AXb) thus maintaining the correct sequence of operation of the external
control circuit. When ordering, SBC with the same number of contacts as auxiliary switches (AXb)
will be provided.
Operating sequence
Switch rating
Disconnected
Main circuit
Display position of
drawout operation
Change-over sequence
of SBC
(b-contact)
DISCON
Connected
TEST
CONNECT
Current (A)
Voltage (V)
AC
ON
OFF
DC
Resistive load
Inductive load
250
10
2
125
10
3
250
0.2
0.2
125
0.4
0.4
30
4
3
Refer to the Min. load range graph in Page 14.
Lifting hook(HP)
This is the metal fitting to suspend the main body when the breaker is removed from the drawout
cradle. The fixed type breaker is equipped with HP as standard.
Safety shutter(SST)
The safety shutters cover the conductors (cradle side) and prevent contact with them when the
breaker is drawn out.
Safety shutter lock(SST-Lock)
This kit is used to lock the safety shutters using 2 padlocks (the padlocks to be customer's supply).
The safety shutters close when the breakers drawn out to prevent accidental contact with the main
contacts.
Mis-insertion preventor(MIP)
This prevents other breakers than specified from inserting into the cradle, and max.5 patterns are
available.
Not available for AE4000-SW~AE6300-SW
Test jumper(TJ)
With the breaker taken out of its cradle, this device enables the breaker to be electrically opened
and closed, and the operating sequence to be checked. 3m length of cable is equipped as standard
shipment.
18
3
This module provides the control power source for Trip
indicator LED and Additional function modules like EX1,
DP1, etc..
Please select a Power supply type from P1 to P5, which
include Power supplys with output contact or with SSR
output contact for 200V DC.
(The Over current protection and Ground fault
protection (GFR)* can work with power from Internal
CT, even if Control power source is off. )
Note*) For Ground fault protection, it works under the
rated current (In) setting of 0.2-1.0 without Control
power source.
A
D
1
B
F
E
2
G
F
Display (option)
F
Several measuring data (current, voltage, power etc) and
alarms can be displayed with this module.
Extension module (option)
G
Load current LED (standard)
RUN and ERR. LED (standard)
This indicator displays the ETR situation (Run or Error)
E
Trip indicator LED (standard)
This indicator displays the trip cause. (Self-holding type)
If output contact for this Trip indicator is required, Power
supply module should be selected from P3, P4 or P5.
RESET button (standard)
With this Reset button, Trip indicator, Display data like fault
cause and fault current and Pre-alarm are reseted. When
Power supply module P3, P4 or P5 is equipped, the
resetting from Control circuit terminal become possile.
Additionally, this Reset button provides a lock function of
LTD and STD characteristics on the INST testing with
Mitsubishi Tester "Y-2005".
This indicator shows the actual current-carrying level.
D
Pre-alarm (PAL LED and Current setting dial) (standard)
This indicator displays the Pre-Alarm situation when exceed
the setting current. If output contact for this Pre-alarm is
required, Power supply module should be selected from P3,
P4 or P5. And by adding the Optional setting module "AP",
2nd Pre-alarm can be added.
This module is required when installed VT unit, display
module and each interface unit.
C
Optional setting module (option)
With each optional setting modules, the following
functions can be added respectively.
G1: Ground fault protection
N5: Neutral pole 50% protection
E1: Earth leakage protection in combination with ZCT
AP: 2nd Additional Pre-alarm
H
B
Main setting module
This module provides the characteristic setting function
of Over current protection according to application.
The modules for general use (WS) and for generator
protection use (WM) have the setting dials for LTD,
STD and INST operating characteristics. And the
module for special use (WB) has setting dials for INST
only.
4 pole breaker provides Neutral 100% protection as
standard, which becomes 50% protection when
installed Optional setting module "N5".
C
A
Power supply module
H
TEST terminal (standard)
This Test terminal is used for the field testing of characteristics
with Mitsubishi Tester "Y-2005" (refer to Page 32).
OCR alarm (AL) (standard)
When tripped by Over current, Ground fault (GFR) and Earth leakage (ER), this device outputs alarm signal.
There are two types of OCR alarms. One is Automatic reset type with 30ms one pulse output (standard) and the other is Manual
reset type with self-holding (optional). For details, refer to Page 14.
Neutral pole overcurrent protection (NP) (standard)
When Harmonics in load current become higher, the current on Neutral pole may exceed the rated current. This Neutral pole
overcurrent protection prevents the troubles caused by higher Harmonics.
Electronic trip relay (ETR) Type designation breakdown
● Main setting module
19
WS1, WB1, WM1, WF1 AE630–1600-SW,
AE2000–3200-SW,
AE4000-SW
WS2, WB2, WM2, WF2 AE2000-SWA,
AE4000-SWA,
AE5000-SW
WS3,WB3,WM3,WF3 AE6300-SW
WS : General use
WM : Generator protection use
WB : INST only
WF : Protective coordination use
● Optional setting module
● Power supply
G1: Ground fault protection
P1: 100-240V AC•DC
N5: Neutral pole 50% protection
P2: 24-60V DC
E1: Earth leakage protection
P3: 100-240V AC / 100-125V DC with output contact
AP: 2nd Additional Pre-alarm
P4: 24-60V DC with output contact
NA: Without optional setting
P5: 100-240V DC with output contact (SSR)
● ETR Auxiliary Equipment
Temperature alarm(TAL)
MCR switch(MCR-SW)
Neutral CT(NCT)
External ZCT
Characteristic table
N5
NA
G1
E1
AP
Nothing
Ground fault
Earth leakage
2nd additional Pre-alarm
2
1
Neutral pole
50% protection
WS
General use
LTD+STD+
INST/MCR
WM
Generator protection use
LTD+STD+
INST/MCR
WB
Special use
INST/MCR
WF
Protective coordination use
LTD+STD+
INST/MCR
Power supply module
Type
P1
Rated Voltage
(V)
3
Contact capacity(Type P3 and P4)
100-240 AC•DC 85-264 AC•DC
P2
24-60 DC
Current (A)
Applicable
Criterion for Power
Voltage range
requirement
(V)
(VA)
18-72 DC
Alarm output
15
—
10
—
100-240 AC
100-125 DC
85-264 AC
85-138 DC
15
6 output contacts
P4
24-60 DC
18-72 DC
10
6 output contacts
P5
100-240 DC
85-264 DC
15
6 output contacts (SSR)
AC
DC
G1
ETR dial set
TRIP side
E1
AP
Self-holding Self-holding
ALARM side Automatic
reset
Automatic
reset
—
Automatic
reset
cosφ=1.0
cosφ=0.4
L/R=0.7
240
1
0.5
120
1
1
125
0.1
0.05
30
1
1
Current capacity(Type P5)
Note1: Over current protection and ground fault protection operates without control power source.
Note2: Factory setting of 6 output contacts is as follows.
➀
➁
➂
➃
➄
➅
PAL
Automatic
reset
Inductive load
Voltage(V)
P3
LTD
STD/INST G1/E1/AP
to
Self-holding Self-holding Refer
lower table
Resistive load
TAL
Automatic
reset
ERR
Automatic
reset
Voltage(V)
AC
Self-holding:
The output is maintained until it resets.
Automatic reset:
The output will be reset if it backs to
normal condition.
DC
Normal
current (A)
Peak inrush ON resistance (Ω)
(max.)
current (A)
240
0.1
0.3
5
120
0.1
0.3
5
240
0.1
0.3
5
30
0.1
0.3
5
CT rating table
AE630-SW
AE1000-SW AE1250-SW AE1600-SW AE2000-SWA
1000A
630A
1250A
1600A
2000A
AE2000-SW AE2500-SW AE3200-SW AE4000-SWA
250A
315A
500A
1250A
1600A
2000A
2500A
Note1: AE630-SW and AE2000-SW has low rating type.
Please refer to the “Ordering information sheet.” (Page 61-63)
Note2: Low rating type of AE630-SW is not available for the ground fault protection.
Note3: As for details of ratings, refer to page 9 and page 10.
3200A
4000A
AE4000-SW AE5000-SW AE6300-SW
4000A
5000A
6300A
Additional function
Extension module(EX1)
Display(DP1)
Display onto panel board(DP2)
VT unit(VT)
Network
BIF-CC
BIF-PR
BIF-MD
Wire system (when EX1 is specified)
3φ3W
3φ4W
EX1
Normal connection
Reverse connection
20
A Trip indicator LED
B Pre-alarm LED
C Temperature alarm LED
D Load current LED
E RUN LED
F ERR. LED
G
G Current setting dial
L
H Uninterrupted current setting dial
D
I LTD time setting dial
E
H
J STD pick-up setting dial
I
K STD time setting dial
L INST/MCR pick-up current setting dial
F
J
M Optional setting module (P.29~31)
B
N Pre-alarm current setting dial
O RESET button (TEST L/S LOCK button)
K
A
P TEST terminal
C
M
Note: The figure shows WS1 type with G1 module,
Display (DP1) and MCR switch.
G1, DP1 and MCR are optional equipments.
O
Relation of setting dial
P
In (CT rating)
Ir
Iu
Ip
Ig (P.29)
Isd
Ip2 (P.31)
Ii
Load current LED
N
(60, 80, 100%, OVER)
Adjustable setting range
No. Setting item
Adjustable setting range
Mark
G
Current setting
Ir
0.5 ~ 1.0 (0.05step) x In (CT rating)
H
Uninterrupted
current
Iu
0.8 ~ 1.0 x Ir (0.02step), Pick-up current : 1.15 x Iu
I
LTD time
TL
12–25–50–100–150s
J
STD pick-up
current
Isd
1.5–2–2.5–3–4–5–6–7–8–9–10 x Ir
K
STD time
Tsd
at Iu x 2
0.5–0.4–0.3–0.2–0.1–0.06–0.06–0.1–0.2–0.3–0.4–0.5s
(I2t ON)
(I2t OFF)
at Isd x 1.5
AE630-SW~AE1600-SW
x Ir
AE2000-SW~AE3200-SW 16-12-10-8-6-4-2-2-4-6-8-10-12-16
(INST)
(MCR)
WS1
AE4000-SW
L
INST/MCR
pick-up current
Ii
AE2000-SWA, AE4000-SWA
AE5000-SW
AE6300-SW
(INST)
(MCR)
Factory default
value
—
1.0
1.05 x Iu…Non Pick-up
1.25 x Iu…Pick-up
1.0
± 20%
150
± 15%
10
± 20%
It operates in the
range between 0.04
and 0.08s when the
time set at 0.06s.
0.5 (I2t ON)
WS1…16 (INST)
± 15%
10-8-6-4-2-2-4-6-8-10 x Ir
(INST)
(MCR)
WS2…12 (INST)
WS2
WS3…10 (INST)
WS3
N
Pre-alarm current
Ip
Iu x 0.68 ~ 1.0 (0.04step) –OVER
± 10%
OVER
—
Pre-alarm time
Tp
1/2 TL at Iu x 2 (after 1/2 TL, PAL contact output turns on.)
± 20%
—
Upper table denote the case optional MCR function is included.
21
12-10-8-6-4-2-2-4-6-8-10-12 x Ir
Accuracy
For WS relay, Pre-alarm current "OVER" setting is Iu x 1.15.
■Operating characteristic curve (for general use : WS)
5000
(h)
4000
1
3000
40
2000
30
20
1000
Pre-alarm current : Ip
Iu x 0.68~1.0(0.04step)-OVER ±10%
15
10
Uninterrupted current : Iu
0.8~1.0 x Ir(0.02step)
…
LTD Pick-up 1.05 x Iu…Non pick-up
1.25 x Iu Pick-up
500
400
300
8
(min)
6
4
200
2
LTD time : TL
12-25-50-100-150(s) ±20%
(at Iu x 2)
100
60
50
40
40
30
30
20
operating time (s)
1
50
20
Pre-alarm time : Tp
TL/2 ±20%(at Iu x 2)
10
10
STD pick-up current : Isd
Ir x 1.5-2-2.5-3-4-5-6-7-8-9-10 ±15%
5
5
4
4
3
3
2
2
(s)
With MCR
1
1
STD time : Tsd
Note1
0.06-0.1-0.2-0.3-0.4-0.5(s) ±20%
(at Isd x 1.5)
.5
.4
.5
.4
.3
.3
.2
.2
.1
.1
.05
Current
.04
LTD Pick-up, Ip…% of Uninterrupted current Iu
I2t ON
(ramp)
Iu, Isd, Ii………% of Current setting Ir
I2t OFF
.05
.04
.03
.03
.02
INST/MCR pick-up current : Ii
Ir x 2-4-6-8-10-12-16 ±15% WS1
Ir x 2-4-6-8-10-12 ±15% WS2
Ir x 2-4-6-8-10 ±15% WS3
Note1 When Tsd="0.06"setting,operating time is 0.04~0.08s.
I2t is selectable ON or OFF.
Max. breaking time
(In case of AE4000-SW~
6300-SW, it is 0.05s)
.02
.01
1
2
5
10
20
50
100 125 150 200
500
1000
1600 2000
5000
.01
10000
current (%)
22
This WM relay is mainly used for the protection of generator on ship.
Current setting Ir (default value) is fixed at the value complying with the rating of generator, which should be
indicated when placing an order.
A Trip indicator LED
B Pre-alarm LED
C Temperature alarm LED
D Load current LED
E RUN LED
F ERR. LED
K
G LTD pick-up current
D
H LTD time setting dial
I STD pick-up setting dial
E
J STD time setting dial
G
K INST/MCR pick-up current setting dial
F
L Optional setting module (P.29~31)
H
M Pre-alarm current setting dial
I
B
N RESET button (TEST L/S LOCK button)
O TEST terminal
A
J
Note: The figure shows WM1 type with G1 module,
Display (DP1) and MCR switch.
G1, DP1 and MCR are optional equipments.
C
L
Relation of setting dial
N
In (CT rating)
O
Ir (Fixed)
IL
Ip
Ig (P.29)
Isd
Ip2 (P.31)
Ii
Load current LED
(40, 60, 80, 100%)
M
Adjustable setting range
No. Setting item
Mark
Adjustable setting range
—
Current setting
Ir
To be fixed at Factory default value in the available range,
which shows in Page 9 and 10.
G
LTD pick-up
current
IL
1.0–1.05–1.1–1.15–1.2 x Ir
H
LTD time
TL
15–20–25–30–40–60s
I
STD pick-up
current
Isd
1.5–2–2.5–3–3.5–4–4.5–5 x Ir
J
STD time
Tsd
at IL x 1.2
0.5–0.4–0.3–0.2–0.1–0.06–0.06–0.1–0.2–0.3–0.4–0.5s
(I2t ON)
(I2t OFF)
at Isd x 1.5
AE630-SW~AE1600-SW
x Ir
AE2000-SW~AE3200-SW 16-12-10-8-6-4-2-2-4-6-8-10-12-16
(INST)
(MCR)
WM1
AE4000-SW
K
INST/MCR
pick-up current
Ii
AE2000-SWA, AE4000-SWA
AE5000-SW
12-10-8-6-4-2-2-4-6-8-10-12 x Ir
AE6300-SW
23
(INST)
(MCR)
Accuracy
Factory default
value
—
To be complied with
ordering indication
± 5%
1.15
± 20%
20
± 15%
5
± 20%
It operates in the
range between 0.04
and 0.08s when the
time set at 0.06s.
0.5 (I2t ON)
WM1…16 (INST)
± 15%
10-8-6-4-2-2-4-6-8-10 x Ir
(INST)
(MCR)
WM2…12 (INST)
WM2
WM3…10 (INST)
WM3
M
Pre-alarm current
Ip
IL x 0.68 ~ 1.0 (0.04step) –OVER
± 5%
OVER
—
Pre-alarm time
Tp
1/2 TL at IL x 1.2 (after 1/2 TL, PAL contact output turns on.)
± 20%
—
Upper table denote the case optional MCR function is included.
For WM relay only, when Pre-alarm current Ip is set at "OVER", the Ip value become equal to "IL x 1.0".
■Operating characteristic curve (for generator protection use : WM)
5000
(h)
4000
1
3000
40
2000
30
20
Pre-alarm current : Ip
IL x 0.68
0.68~~1.0(0.04step)
1.0(0.04step)±10%
±5%
1000
15
10
500
LTD pick-up current : IL
1.0-1.05-1.1-1.15-1.2 ±5%
Factory setting position is 1.15
400
300
8
(min)
6
4
200
2
100
60
LTD time : TL
15-20-25-30-40-60(s) ±20%
(at IL x 1.2)
50
operating time (s)
40
1
50
40
30
30
20
20
Pre-alarm time : Tp
TL/2 ±20%(at IL x 1.2)
10
10
STD pick-up current : Isd
Ir x 1.5-2-2.5-3-3.5-4-4.5-5 ±15%
5
5
4
4
3
3
STD time : Tsd Note1
0.06-0.1-0.2-0.3-0.4-0.5(s) ±20%
(at Isd x 1.5)
2
2
(s)
With MCR
1
1
.5
.5
.4
.4
.3
.3
.2
.2
.1
.1
I2t ON
(ramp)
.05
.04
Current
.03
.02
.05
.04
2
I t OFF
IL, Isd, Ii …… % of Current setting Ir
Ip…% of LTD pick-up current IL
.03
INST/MCR pick-up current : Ii
Ir x 2-4-6-8-10-12-16 ±15% WM1
Ir x 2-4-6-8-10-12 ±15% WM2
Ir x 2-4-6-8-10 ±15% WM3
Note1 When Tsd="0.06"setting,operating time is 0.04~0.08s.
I2t is ON/OFF selectable.
Max. breaking time
(In case of AE4000-SW~
6300-SS it itisis0.05s)
6300-SW,
0.05s)
.01
1
2
5
10
20
50
100 120 150 200
500
1000
1600 2000
5000
.02
.01
10000
current (%)
24
This WB relay is effective for the combination with the external OCR without severely decreasing the
breaking capacity.
Actually, if ACB is combined with the external OCR only without WB relay, its breaking capacity comes to be
reduced drastically. (e.g. For AE1600-SW, it's reduced to 25kA.)
A Trip indicator LED
B Pre-alarm LED
C Temperature alarm LED
D
D Load current LED
G
E RUN LED
E
F ERR. LED
G Current setting dial
F
H INST/MCR pick-up current setting dial
H
I Pre-alarm current setting dial
B
J RESET button
A
K TEST terminal
Note: The figure shows WB1 type with MCR switch.
MCR is optional equipment.
C
Relation of setting dial
J
K
In (CT rating)
Ir
Ii
Ig (P.29)
Ip
Ip2 (P.31)
Load current LED
I
(60, 80, 100%, OVER)
Adjustable setting range
No. Setting item
G
Current setting
Mark
Ir
Adjustable setting range
0.5 ~ 1.0 (0.05step) x In (CT rating)
Accuracy
Factory default
value
—
1.0
AE630-SW~AE1600-SW
x Ir
AE2000-SW~AE3200-SW 16-12-10-8-6-4-2-2-4-6-8-10-12-16
(INST)
(MCR)
WB1
AE4000-SW
H
INST/MCR
pick-up current
Ii
AE2000-SWA, AE4000-SWA
AE5000-SW
12-10-8-6-4-2-2-4-6-8-10-12 x Ir
AE6300-SW
(INST)
± 15%
(INST)
(MCR)
WB2…12 (INST)
WB2
10-8-6-4-2-2-4-6-8-10 x Ir
WB3…10 (INST)
WB3
I
Pre-alarm current
Ip
Ir x 0.68 ~ 1.0 (0.04step) –OVER
± 10%
OVER
–
Pre-alarm time
Tp
75s at Ir x 2 (after 75s, PAL contact output turns on.)
± 20%
—
Upper table denote the case optional MCR function is included.
For WB relay, when Pre-alarm current Ip is set at "OVER", the Ip value is "Ir x 1.15".
25
(MCR)
WB1…16 (INST)
■Operating characteristic curve (for special use : WB)
5000
(h)
4000
1
3000
40
2000
30
20
1000
15
10
Pre-alarm current: Ip
Ir x 0.68 ~ 1.0(0.04step)-OVER ±10%
500
400
Max. time of
let-through current
8
6
Pre-alarm time: Tp
75s ±20% at Ir x 2
300
200
(min)
4
2
Max. Setting of
External OCR
operating time (s)
100
60
1
50
50
40
40
30
30
20
20
10
10
5
5
4
4
INST/MCR pick-up current: Ii
Ir x 2-4-6-8-10-12-16 ±15% WB1
Ir x 2-4-6-8-10-12 ±15% WB2
Ir x 2-4-6-8-10- ±15% WB3
3
2
3
Up to Icw
2
(s)
1
1
.5
.5
.4
.4
Up to Icw
.3
.3
.2
.2
.1
.1
.05
.05
.04
.04
.03
.03
Max. breaking time
(In case of AE4000-SW~
6300-SW, it is 0.05s)
.02
Current Ip, Ii …… % of Current setting Ir
.01
1
2
5
10
20
50
100 125
200
500
1000
1600 2000
.02
5000
.01
10000
current(%)
26
WF relay incorporates five kinds of LTD characteristics.
Protective coordination with upstream OCRs and/or Fuses can be more easily achieved.
■Operating characteristic curve
G
t (time)
The selectable
characteristics are the
following five curves.
L
D
( I4 -1)t = const.
( I3 -1)t = const.
( I2 -1)t = const.
( I -1)t = const.
( I0.02 -1)t = const.
H
E
I
F
[LTD curve setting "a=2"]
2
5000
4000
3000
Pre-alarm current : Ip
Ir x 0.68~1.0(0.04step)-OVER±5%
2000
J
B
a=2
10000
A
1
40
30
Current setting : Ir
0.5~1.0(0.05step) x In(CT rating)
x Ir ... Non pick-up
LTD pick-up 1.10
1.20 x Ir ... Pick-up
1000
20
15
K
10
8 (min)
6
500
400
300
C
M
I (current)
LTD characteristics curves
O
4
200
2
100
N
LTD curve can be selected
by the LTD curve setting dial.
A Trip indicator LED
B Pre-alarm LED
C Temperature alarm LED
D Load current LED
E RUN LED
F ERR. LED
G Current setting dial
operation time (s)
P
LTD operating time tLTD
Pre-alarm time : Tp
TL /2±20%
Note1
(4/1.1155)a-1
x TL
tLTD =
(I/1.1155Ir)a-1
Accuracy :
a=2
±30%(1.5Ir⬉load
current<4Ir)
I = load current (A)
Ir= 0.5~1.0 x In (A) ±20%(4Ir⬉load current)
TL = 1~18 (s)
60
50
40
30
20
PAL operating time tPAL
LTD time : TL
1-2-3-4-5-6-8-10-12-15-18(s)±20%
(at Ir x 4)
20
Note2
(4Ir/0.97lp)a-1
x TL
(I/0.97lp)a-1
Accuracy :
a=2
±30%(1.5Ir⬉load current<4Ir)
I = load current (A)
Ip= 0.68~1.15 x Ir (A) ±20%(4Ir⬉load current)
TL = 1~18 (s)
tPAL =
10
5
4
3
1
50
40
30
10
5
4
3
2
With MCR
I LTD curve setting dial
1
1
J STD pick-up setting dial
STD time : Tsd
Note3
0.06-0.1-0.2-0.3-0.4-0.5(s)±20%
(at Isd x 1.5)
.5
.4
.3
K STD time setting dial
L INST/MCR pick-up current setting dial
N Pre-alarm current setting dial
P TEST terminal
Note: The figure shows WF1 type with G1 module, Display (DP1) and MCR switch.
G1, DP1 and MCR are optional equipments.
.1
Ip
Ip2 (P.31)
Load current LED
I2t ON
.05
.04 Note1 : LTD operating time is 0.8s(FLAT)when the operating
time becomes 0.8s or less.
.03
.02
Relation of setting dial
Isd
Ii
.2
.1
O RESET button (TEST L/S LOCK button)
Ir
Ig (P.29)
.5
.4
.3
STD pick-up current : Isd
Ir x 1.5-2-2.5-3-4-5-6-7-8-9-10±15%
.2
M Optional setting module (P.29~31)
In (CT rating)
(at Ir x 4)
2
H LTD time setting dial
.01
INST/MCR pick-up current : Ii
Ir x 2-4-6-8-10-12-16 ±15% : WF1
Ir x 2-4-6-8-10-12 ±15% : WF2
±15% : WF3
Ir x 2-4-6-8-10
Note2 : PAL operating time is 0.5s(FLAT) when the operating
time becomes 0.5s or less.
Note3 : When Tsd ="0.06" setting,operating time is 0.04~0.08s.
I2t is selectable ON or OFF.
2
1
5
10
50
20
.05
.04
.03
(ramp)
I2t OFF
100 150
125 200
500
Max. breaking time
(In case of AE4000-SW~
6300-SW, it is 0.05s)
1000 2000
1600
.02
.01
5000 10000
current (%)
(60, 80, 100%, OVER)
Adjustable setting range
No.
Setting item
Mark
Adjustable setting range
G Current setting
Ir
0.5 ~ 1.0 (0.05step) x In (CT rating)
LTD pick-up current : 1.15 x Ir
H LTD time
TL
1–2–3–4–5–6–8–10–12–15–18s
I
a
0.02–1–2–3–4
LTD curve setting
STD pick-up
Accuracy
at Ir x 4
J current
Isd
1.5–2–2.5–3–4–5–6–7–8–9–10 x Ir
K STD time
Tsd
0.5–0.4–0.3–0.2–0.1–0.06–0.06–0.1–0.2–0.3–0.4–0.5s
(I2t ON)
(I2t OFF)
at Isd x 1.5
INST/MCR
L pick-up current
AE2000-SWA, AE4000-SWA
AE5000-SW
AE6300-SW
N Pre-alarm current
— Pre-alarm time
27
1.0
± 30% (1.5Ir⬉load current⬍4Ir)
± 20% (4Ir⬉load current)
18
—
2
± 15%
10
± 20%
It operates in the range
between 0.04 and 0.08
when the time set at 0.06s.
0.5 (I2t ON)
Ip
Tp
(INST)
(MCR)
WF1…16 (INST)
± 15%
12-10-8-6-4-2-2-4-6-8-10-12 x Ir
(MCR)
Ir x 0.68 ~ 1.0 (0.04step) –OVER
1/2 TL at Ir x 4 (after 1/2 TL, PAL contact output turns on.)
Upper table denote the case optional MCR function is included.
For WF relay, when Pre-alarm current Ip is set at "OVER", the Ip value is "Ir x 1.15".
WF2…12 (INST)
WF2
WF3…10 (INST)
10-8-6-4-2-2-4-6-8-10 x Ir
(INST)
Factory default
value
1.10 x Ir…Non Pick-up
1.20 x Ir…Pick-up
AE630-SW~AE1600-SW
x Ir
AE2000-SW~AE3200-SW 16-12-10-8-6-4-2-2-4-6-8-10-12-16
(INST)
(MCR)
AE4000-SW
WF1
Ii
(h)
WF3
± 5%
OVER
± 30% (1.5Ir⬉load current⬍4Ir)
± 20% (4Ir⬉load current)
—
(s)
■Operating characteristic curve (for protective coordination use : WF)
[LTD curve setting "a=0.02"]
[LTD curve setting "a=1"]
a=1
a=0.02
10000
10000
2
5000
4000
3000
Pre-alarm current : Ip
Ir x 0.68~1.0(0.04step)-OVER ±5%
2000
Current setting : Ir
0.5~1.0(0.05step) x In(CT rating)
1.10 x Ir ... Non pick-up
LTD pick-up
1.20 x Ir ... Pick-up
1000
2
1
5000
4000
3000
40
30
2000
20
15
1000
10
8 (min)
6
500
400
300
Pre-alarm time : Tp
TL /2 ±20%
LTD time : TL
Note1
1-2-3-4-5-6-8-10-12-15-18(s) ±20%
(at Ir x 4)
1
50
40
30
20
20
10
10
5
4
3
5
4
3
2
2
operation time (s)
60
50
40
30
40
30
20
15
10
8 (min)
6
4
2
100
Note2
(at Ir x 4)
Pre-alarm time : Tp Note2
(at Ir x 4)
TL /2 ±20%
LTD time : TL
Note1
1-2-3-4-5-6-8-10-12-15-18(s) ±20%
(at Ir x 4)
60
50
40
30
20
10
10
5
4
3
5
4
3
2
Note3
STD time : Tsd
0.06-0.1-0.2-0.3-0.4-0.5(s) ±20%
(at Isd x 1.5)
.5
.4
.3
STD pick-up current : Isd
Ir x 1.5-2-2.5-3-4-5-6-7-8-9-10 ±15%
.2
.1
I2t ON
(ramp)
.05
.04
.03
.02
.01
1
5
2
10
20
100 150
125 200
50
.5
.4
.3
.5
.4
.3
.2
.2
.1
.1
.02
.02
.01
5000 10000
.01
(In case of AE4000-SW~
6300-SW, it is 0.05s)
1000 2000
1600
1
.05
.04
.03
Max. breaking time
500
1
.05
.04
.03
I2t OFF
INST/MCR pick-up current : Ii
Ir x 2-4-6-8-10-12-16 ±15% WF1
Ir x 2-4-6-8-10-12
±15% WF2
Ir x 2-4-6-8-10
±15% WF3
1
STD time : Tsd
Note3
0.06-0.1-0.2-0.3-0.4-0.5(s) ±20%
(at Isd x 1.5)
.5
.4
.3
STD pick-up current : Isd
Ir x 1.5-2-2.5-3-4-5-6-7-8-9-10 ±15%
.2
.1
I2t ON
(ramp)
.05
.04
.03
I2t OFF
INST/MCR pick-up current : Ii
Ir x 2-4-6-8-10-12-16 ±15% WF1
Ir x 2-4-6-8-10-12
±15% WF2
Ir x 2-4-6-8-10
±15% WF3
1
2
5
10
20
50
100 150
125 200
Max. breaking time
(In case of AE4000-SW~
6300-SW, it is 0.05s)
500
1000 2000
1600
.02
.01
5000 10000
current (% of current setting Ir)
current (% of current setting Ir)
[LTD curve setting "a=3"]
[LTD curve setting "a=4"]
a=4
a=3
10000
10000
2
5000
4000
3000
Pre-alarm current : Ip
Ir x 0.68~1.0(0.04step)-OVER±5%
2000
Current setting : Ir
0.5~1.0(0.05step) x In(CT rating)
...
LTD pick-up 1.10 x Ir ... Non pick-up
1.20 x Ir Pick-up
1000
(h)
2
1
5000
4000
3000
40
30
2000
20
15
1000
10
8 (min)
6
500
400
300
1
50
40
30
20
20
10
10
5
4
3
5
4
3
2
2
operation time (s)
LTD time : TL
Note1
1-2-3-4-5-6-8-10-12-15-18(s)±20%
(at Ir x 4)
40
30
20
15
10
8 (min)
6
4
2
100
Pre-alarm time : Tp Note2
(at Ir x 4)
TL /2±20%
60
50
40
30
(s)
Pre-alarm time : Tp
TL /2 ± 20%
60
50
40
30
STD time : Tsd
Note3
0.06-0.1-0.2-0.3-0.4-0.5(s)±20%
(at Isd x 1.5)
.5
.4
.3
STD pick-up current : Isd
Ir x 1.5-2-2.5-3-4-5-6-7-8-9-10±15%
.2
.1
I2t ON
(ramp)
I2t OFF
.05
.04
.03
INST/MCR pick-up current : Ii
Ir x 2-4-6-8-10-12-16 ±15% : WF1
Ir x 2-4-6-8-10-12
±15% : WF2
Ir x 2-4-6-8-10
±15% : WF3
.02
Max. breaking time
(In case of AE4000-SW~
6300-SW, it is 0.05s)
.01
1
2
5
10
20
50
100 150
125 200
500
1000 2000
1600
1
50
40
30
20
20
10
10
5
4
3
5
4
3
2
2
(s)
With MCR
1
1
.5
.4
.3
.5
.4
.3
.2
.2
.1
.1
.05
.04
.03
.05
.04
.03
.02
.02
.01
5000 10000
.01
current (% of current setting Ir)
Note 1: LTD operating time tLTD is calculated by the following equations.
a = LTD curve setting
I = load current (A)
(4/1.1155)a -1
tLTD =
x TL
Ir = 0.5~1.0 x In (A)
(I/1.1155Ir)a -1
TL = 1~18 (s)
The accuracy of operating time is ±30% (1.5Ir⬉load current⬍4Ir) or ±20% (4Ir⬉load current).
LTD operating time is 0.8s(FLAT) when the operating time becomes 0.8s or less.
Note 3: When Tsd = "0.06" setting, operating time is 0.04~0.08s.
I2t is selectable ON or OFF.
Note2
(at Ir x 4)
Note1
LTD time : TL
1-2-3-4-5-6-8-10-12-15-18(s) ± 20%
(at Ir x 4)
With MCR
1
(h)
1
Current setting : Ir
0.5~1.0(0.05step) x In(CT rating)
...
LTD pick-up 1.10 x Ir ... Non pick-up
1.20 x Ir Pick-up
200
2
100
Pre-alarm current : Ip
Ir x 0.68~1.0(0.04step)-OVER ± 5%
500
400
300
4
200
operation time (s)
(s)
With MCR
With MCR
1
1
50
40
30
20
2
(s)
(h)
1
Current setting : Ir
0.5~1.0(0.05step) x In(CT rating)
LTD pick-up 1.10 x Ir ... Non pick-up
1.20 x Ir ... Pick-up
200
2
100
Pre-alarm current : Ip
Ir x 0.68~1.0(0.04step)-OVER ±5%
500
400
300
4
200
operation time (s)
(h)
1
STD time : Tsd
Note3
0.06-0.1-0.2-0.3-0.4-0.5(s) ± 20%
(at Isd x 1.5)
.5
.4
.3
STD pick-up current : Isd
Ir x ± 1.5-2-2.5-3-4-5-6-7-8-9-10 ± 15%
.2
.1
I2t ON
(ramp)
.05
.04
.03
I2t OFF
INST/MCR pick-up current : Ii
Ir x 2-4-6-8-10-12-16 ± 15% : WF1
Ir x 2-4-6-8-10-12
± 15% : WF2
Ir x 2-4-6-8-10
± 15% : WF3
1
2
5
10
20
50
100 150
125 200
500
Max. breaking time
(In case of AE4000-SW~
6300-SW, it is 0.05s)
1000 2000
1600
.02
.01
5000 10000
current (% of current setting Ir)
Note 2: PAL operating time tPAL is calculated by the following equations.
a = LTD curve setting
I = load current (A)
(4Ir/0.97Ip)a -1
TL
tPAL =
x
2
Ip = 0.68~1.15 x Ir (A)
(I/0.97Ip)a -1
TL = 1~18 (s)
The accuracy of operating time is ±30% (1.5Ir⬉load current⬍4Ir) or ±20% (4Ir⬉load current).
PAL operating time is 0.5s(FLAT) when the operating time becomes 0.5s or less.
28
Accessories
Ground fault protection(GFR)
The ground fault protection (GFR) of several hundred amperes is possible. This function can be
selected for trip and alarm (no trip). Power supply is necessary for this function, even if there is not
power supply, it can function at 0.2xIn or higher.
Mark Adjustable setting range
Setting item
Accuracy
Factory
default value
±20%
1.0
GFR pick-up current Ig
0.1-0.2-0.3-0.4-0.5-0.6-0.7-0.8-0.9-1.0 x In
GFR time
3-1.5-0.8-0.5-0.3-0.15-<0.1 - <0.1-0.15-0.3-0.5-0.8-1.5-3s
±20% 3s (TRIP)
TRIP
ALARM
(at 1.5 x Ig)
Tg
alarm output
—
TRIP side : Self-holding/ALARM side : Automatic reset
Neutral CT(NCT)
—
TRIP side
(Self-holding)
Only use for AE-SW
The Neutral CT is used for ground fault protection when the 3 pole breaker is used on a 3 phase 4
wires system and for over current protection on N phase. Please use this CT in combination with
ground fault protection (GFR). As for outline dimensions, refer to page 52.
The length of the cable (attached) for NCT is 2m.
GFR function block diagram (In case of 4pole breaker)
ACB
Ground fault protection characteristics
30
20
ETR
Alarm
contact
output
P1
513
P2
544
Control
power
supply
Pick-up current : Ig
In x 0.1~1.0 ±20%
(0.1step)
10
8
0.1
1.0
6
5
4
Block diagram with NCT function
3.0
3
ACB
ETR
Alarm
contact
output
P1
513
P2
N2
N1
544
Control
power
supply
operating time (s)
2
1
Ground fault time: Tg
<0.1-0.15-0.3-0.5-0.8-1.5-3.0s ±20%
.5
.4
.3
NCT
.2
NCT type name
NCT type name
29
0.15
ACB type name / CT rating
NCT06
AE630-SW 630A
NCT10
AE1000-SW 1000A
NCT12
AE1250-SW 1250A
AE2000-SW 1250A
NCT16
AE1600-SW 1600A
AE2000-SW 1600A
.05
NCT20
AE2000-SWA 2000A AE2000-SW 2000A
.04
NCT25
AE2500-SW 2500A
.03
NCT32
AE3200-SW 3200A
NCT40
AE4000-SWA 4000A AE4000-SW 4000A
NCT50
AE5000-SW 5000A
NCT63
AE6300-SW 6300A
.1
Refer to Outline dimensions in page 52.
<0.1
(0.04~0.1)
.02
10
20
50
100
150 200
300
Ground fault current (% of CT rating In)
500
1000
Earth leakage protection(ER)
By combining the ETR with earth leakage protection (ER) and External ZCT, earth leakage
protection is possible. Earth leakage protection, earth leakage tripping and earth leakage alarm can
be selected. Control supply is necessary for this function.
Mark Adjustable setting range
Setting item
Accuracy
Factory
default value
0
–30%
10A
ER pick-up current I∆n
1A-2A-3A-5A-10A
ER time
3-1.5-0.8-0.5-0.3-0.15-<0.1 - <0.1-0.15-0.3-0.5-0.8-1.5-3s
±20% 3s (TRIP)
TRIP
ALARM
(at 1.5 x I∆n)
Te
alarm output
—
TRIP side : Self-holding/ALARM side : Automatic reset
—
TRIP side
(Self-holding)
External ZCT
This option is used to detect several amperes of earth leakage when use in combination with a
electronic trip relay that has the earth leakage tripping (ER) option.
Two methods are available. The first is where the all load conductors pass through the ZCT.
The other method uses a smaller ZCT through which the supply transformer's ground wire passes
through to earth.
ZCT for load circuit
ZCT for transformer ground wire
ZCT type name
ACB type name
ZCT163
AE630-SW ~ AE1600-SW 3-pole
ZCT323
ZCT324
ZT15B ZT30B ZT40B ZT60B ZT80B ZT100B
ZCT with primary conductors
AE630-SW ~ AE1600-SW 4-pole
ZCT type name
AE2000-SW ~ AE3200-SW 3-pole
ZTA1200A
AE2000-SW ~ AE3200-SW 4-pole
As for outline dimensions refer to page 52. Make choice
of suitable ZCT in comformity to the BUSBAR size.
ACB type name / Pole
AE630-SW / 3P, AE1000-SW / 3P
AE1250-SW / 3P, AE1600-SW / 3P
ZTA2000A
AE2000-SWA / 3P, AE2000-SW / 3P
Earth leakage protection characteristics
ER function block diagram (for load circuit method)
30
ACB
20
ZCT
ETR with ER
Z1
Z2
P1
513
P2
544
Pick-up current : I∆n
0
1-2-3-5-10A -30%
10
ZCT for
load circuit
or ZCT
with
primary
conductors
8
1A
10A
6
5
4
Control
power
supply
3.0
3
ER function block diagram (transformer ground wire method)
ACB
operating time (s)
2
Alarm contact
output
1
Earth leakage protection operating time :Te
<0.1-0.15-0.3-0.5-0.8-1.5-3.0s ±20%
.5
.4
.3
ZCT
ZCT for
transformer
ground
wire
Z1
ETR with ER
.2
0.15
Z2
513
544
Alarm contact
output
P1
P2
Control
power
supply
.1
<0.1
(0.04~0.1)
.05
.04
.03
.02
0.7
1
2
3
5
7
10
Earth leakage current (A)
20
50
100
30
Accessories
2nd Additional Pre-alarm (AP)
The Pre-Alarm (1st) function already installed in standard breaker, the 2nd additional Pre-Alarm
function can be installed as option, thereby it is possible to monitor (observer) electric circuit in more
detail by 2nd additional Pre-Alarm function.
Setting item
Mark
2nd Additional
Pre-alarm
pick-up current
Ip2
2nd Additional
Pre-alarm
time
Tp2
Adjustable setting range
Accuracy
Factory
default value
0.5-0.6-0.7-0.8-0.84-0.88-0.92-0.96-1.0 x Iu WS ±10% WS
0.5-0.6-0.7-0.8-0.84-0.88-0.92-0.96-1.0 x IL WM
±5% WM
0.9-0.8-0.7-0.6-0.5-0.4-0.3 x TL - 5-10-15-20-30-40-60s
(FLAT)
(x TL)
±20%
1.0
0.9 (x TL)
<Pre-alarm timing chart>
PAL LED starts to blink at time when the actual current exceed the setting current and then after it
passed a half of LTD time (TL) it starts to light and simultaneously the contact output starts. As for
its operating time, refer to the Operating characteristic curves in Page 22, 24 and 26.
Current
Ip
Load Current
PAL LED
PAL OUT
(contact output)
Lighting
Blinking
ON
OFF
1/2 TL
Neutral pole 50% protection (N5)
When used OA equipment or DC power source to bring the third higher harmonic in 3 phases 4
wires circuit, sometimes it comes to give the other peripheral equipments an electrical damage due
to the superposition of the third higher harmonic on Neutral pole.
This Neutral Pole 50% Protection (N5) is useful to protect the other peripheral equipments from
such an electrical damage and also to prevent some troubles with the Pre-Alarm function (AP).
Neutral pole overcurrent protection (operating at 100% of rated current) come already equipped with
ETR as standard features.
But, if the operation at 50% of rated current is required on Neutral pole, it become available with this
optional module unit.
31
MCR switch (MCR-SW)
With this MCR switch, at the time of breaker closing from OFF to ON the INST (Instantaneous)
characteristic works, and then after breaker is in closed (ON) position the INST characteristic
becomes ineffective. This controlling function of INST characteristic is useful for the protection on
the short-circuit fault at the time of closing and also for expanding the selective combination with
branch breakers after closed.
The factory default setting of "INST/MCR pick-up current setting dial" is usually set at "INST", so if
the function of this MCR switch is required, the dial should be changed to set to "MCR".
Temperature alarm (TAL)
When TAL sensor is installed in the breaker, temperature alarm is operative. When the temperature
of main contact exceeds normal level, temperature alarm is indicated by LED on main setting
module and also the output contact is made energize if power supply with output contact is installed.
It is possible to know temperature rising which is caused by wear of main contact because TAL
sensor is installed near main contact. When the temperature of main contact goes down to the
normal level, temperature alarm turns off automatically.
Field test device (Y-2005)
The electronic trip relay can be checked by this field test device when the breaker is at test position
or disconnect position. The breaker will trip when tested with this device.
Y-2005 specification
Input voltage
100-240V AC 50/60Hz
(available voltage range: 85-264V AC)
Power consumption VA
100VA or less
Range of signal output
Voltage signal equivalent to 1%~2500% of Rated current In (CT rating)
(continuously adjustable).
* The output at 100% of CT rating is 141mV at 50Hz or 170mV at 60Hz.
Test power output and trip
check power output
30V DC 5W
Terminal for checking the
signal output
The same signal as the signal output is output to the terminal on the
back side (load impedance: 100kΩ or more).
Stop signal input
"a" contact, "b" contact or test terminal (ETR)
Test items
LTD, STD, INST/MCR, GFR, PAL, PAL2 and Trip check
* ER check is not available.
Signal level
Max. 2500% of Rated current setting (Ir) (accuracy: ±2.5% at CT rating)
Time counter
0.000s ±2ms ~ 999.999s ±1%
Working temperature range
0 ~ 40˚C (humidity: 85%Rh or less)
Storage temperature range
-10˚C ~ 50˚C (humidity: 85%Rh or less)
Dimensions
220mm(W) x 150mm(H) x 340mm(D) (excluding protruding portions)
Weight
4.5kg
Attachments
AC power cord, test cable, carry case
32
Additional functions
By adding the extension module unit in ETR, additional functions like measuring, display
and communication become available.
List of extension unit (Option)
Type
Name
Description
Extension module
EX1
Base module for display and interface function (indispensable)
Display module (relay attachment)
DP1
Display module for ETR
Display module (panel attachment)
DP2
Display module for panel board
VT unit
VT
CC-Link® interface unit
Module for measuring of voltage, active power and active energy
BIF-CC
Interface unit for CC-Link®
PROFIBUS-DP interface unit
BIF-PR
Interface unit for PROFIBUS-DP
MODBUS® (RS-485) interface unit
BIF-MD
Interface unit for MODBUS® (RS-485)
BIF-CON
I/O unit
BIF-CL
Drawout position switch
Module for breaker remote control (Interface unit is required)
Switch for detecting the drawout position of the breaker
(Interface unit and I/O unit are required.)
Selection samples of additional function modules
(
Name
Extension
module
Display
VT unit
Type
EX1
DP1 or/and DP2
VT
BIF-CC
VT unit
(placed
separately)
BIF-CC
Additional function
:required optional modules)
Interface unit
BIF-PR
BIF-MD
Load current Display
Communication CC-Link®
PROFIBUS-DP
MODBUS®
Display &
CC-Link®
Communication
PROFIBUS-DP
MODBUS®
Voltage
Power
Energy
Harmonics
current
etc.
Display
Communication CC-Link®
PROFIBUS-DP
MODBUS®
Display &
CC-Link®
Communication
PROFIBUS-DP
MODBUS®
DP2
(on the Panel)
DP1 EX1(inside breaker)
BIF-PR
BIF-MD
Interface unit (placed separately)
Electronic trip relay (ETR) Type designation breakdown
Additional function
Extension module(EX1)
● Main setting module
WS1, WB1, WM1, WF1 AE630–1600-SW,
AE2000–3200-SW,
AE4000-SW
WS2, WB2, WM2, WF2 AE2000-SWA,
AE4000-SWA,
AE5000-SW
WS3, WB3, WM3, WF3 AE6300-SW
33
WS : General use
WM : Generator protection use
WB : INST only
WF : Protective coordination use
● Optional setting module
● Power supply
G1: Ground fault protection
P1: 100-240V AC•DC
N5: Neutral pole 50% protection
P2: 24-60V DC
E1: Earth leakage protection
P3: 100-240V AC / 100-125V DC
with output contact
P4: 24-60V DC with output contact
AP: 2nd Additional Pre-alarm
NA: Without optional setting
● ETR Auxiliary Equipment
Temperature alarm(TAL)
MCR switch(MCR-SW)
P5: 100-240V DC
with output contact (SSR)
Neutral CT(NCT)
External ZCT
Display(DP1)
Display onto panel board(DP2)
VT unit(VT)
Network
BIF-CC
BIF-PR
BIF-MD
Wire system (when EX1 is specified)
3φ3W
3φ4W
EX1
Normal connection
Reverse connection
Extension module (EX1)
This is the base module that provides various additional functions with combining Display module
(DP1 / DP2), Interface unit (BIF-CC / BIF-PR / BIF-MD) and VT unit (VT).
1 Various measuring elements, high measuring accuracy
By adopting high-performance ASIC, various measuring elememts (load current, voltage, energy,
harmonics, etc.) and high measuring accuracy are attained. Refer to page 34 for more
details.
2 Communication function
With the advanced internal communication function of this EX1 module, it is achieved rapid
transmission of data between ETR and Displays or Interface units. Besides, it can be
extended the function by connecting with Max. 2 display modules and 1 interface unit in
parallel.
Display module (DP1/DP2)
This is the module for display and setting of the various information like measured value, trip
and alarm status, ETR status for display and output contacts setting etc...
1 Multi display of measuring element
It enables to easily monitor the comparison of each measuring element with its multi display
(4 phases multi display of load current and voltage) on one screen.
2 Two-color back light
Under trip or alarm, back light color changes from green to red automatically, which visually
shows an abnormal situation.
3 Graphical display
By adopting dot matrix type LCD, graphical display such as bar graph display of load
current, harmonic currents and characteristic curve is available.
There are 2 types of display module. One is the ETR attachment type (DP1). Another is the
panel attachment type (DP2), which can be connected to extension terminals of control circuit
with 2m cable. 2 units of display modules (DP1 and DP2) can be attached on one breaker.
(As for outline dimensions of DP2, refer to page 53.)
Note;
● Extension module (EX1) is required.
● VT unit (VT) is required to display the measured data except load current.
VT unit (VT)
VT unit enables to measure voltages, powers, energies, harmonic currents and etc.
by connecting the ETR with Extension module (EX1).
(outline dimensions are shown in page 54.)
Note;
● The length of the cable attached for VT unit is 2m.
34
Network
Interface unit (BIF-CC/BIF-PR/BIF-MD)
These Interface units can expand the future possibility in various communication and Intelligent control.
2
1 Applicable to various open networks.
These units are applicable to various open network systems such as CC-Link®,
PROFIBUS-DP and MODBUS® (RS-485), which can be built in easily.
2 Intelligent control by Multi-data communication
It comes into being the Intelligent control by Multi-data communication through these
interface units to PLC/SCADA, which transfer the measurement Information, setting values,
error information and trip and alarm informations.
BIF-CC (CC-Link®)
By using various application softwares for PLC, users can also connect to the
network SCADA system.
Personal
Computer
MELSECNET/10
Interface card
MELSECNET/10
BIF-PR (PROFIBUS-DP)
CC-Link® / PROFIBUS-DP / MODBUS®
Interface
Unit
PLC
I/O Unit
Eco Monitor Pro
ME96NSR
MDU
AE-SW
The length of the cable for interface unit is 2m.
Note: Some device types are excluded.
Note:
● Extension module (EX1) is required.
BIF-MD (MODBUS®(RS-485))
● VT unit (VT) is required to transmit the measured data except load current.
I/O unit (BIF-CON)
The Input & Output Controlling Unit (BIF-CON) is available for the remote controlling and remote
monitoring of the breaker condition through the various network systems.
With this BIF-CON unit in addition to the Interface Unit, it become possible to control the breaker
remotely, like a ON or OFF operations or Spring-charging.
Function
Control
BIF-CON
Monitor
Description
Note
Breaker ON operation
1a contact for Closing coil (CC)
Breaker OFF operation
1a contact for Shunt trip device (SHT)
(not applicable for AC380-500V rating)
Spring charge
1a contact for Motor charging (MD)
For BIF-CC and BIF-MD, Max. 3 contacts
Digital Input (DI) monitoring monitoring are available.
For BIF-PR, 1 contact monitoring is available.
Drawout position switch (BIF-CL)
With this Drawout position switch (BIF-CL) in addition to Interface unit and I/O unit (BIF-CON), the
remote monitoring of draw-out position become available in case of the breaker draw-out type.
Function
Monitor
BIF-CL
35
Description
Breaker Drawout position
Note
Position : Connect or Test or Disconnect
: can be displayed by DP1/DP2
: can be displayed and set by DP1/DP2
+
Combination sample
➀
Type
➀Main setting module
WS / WF
➁
-
➂
+ +
Note 1)
;EX1;DP1(;DP2)
WM
WB
➀
WS / WF
➁
-
➂
Note 1)
;EX1;DP1(;DP2),VT
WB
WM
➁Optional setting module NA AP G1 E1 NA AP G1 E1 NA AP G1 E1 NA AP G1 E1 NA AP G1 E1 NA AP G1 E1
➂Power supply
P1~P5
P1~P5
Measurement
Load current (±2.5%)
Leakage current (±15%)
Note 4)
Voltage (±2.5%)
Power (active,reactive,apparent) (±2.5%)
Power factor (±5%)
Energy (active,reactive) (±2.5%)
(3.5...19th)
Harmonics current (±2.5%)
Frequency (±2.5%)
Trip history
LTD
STD
INST
GFR
ER
UVT
Note 2)
Note 2)
Note 3)
Note 3)
Alarm history
PAL1
PAL2
OVER
GFR
EPAL
ER
TAL
Characteristic setting (panel attachment product [DP2] only)
LTD
STD
INST
PAL1
PAL2
GFR
EPAL
ER
Setting
Contact outputs setting change
Date & Time
Demand time
Alarm holding method
Reset
Trip and alarm information
Measurement information (min. and max. values)
ETR information
Main / Optional setting module information
Error information
CT rating (In)
Phase line method
Normal connection or reverse connection
Note 1 )
Note 2 )
Note 3 )
Note 4 )
2 units of display modules can be attached.
Display is available only when UVT module is attached.
Display is available only when TAL sensor is attached.
Included the accuracy of ZCT.
36
Electronic trip relay circuit diagram
Upper side terminal
Electronic trip relay (ETR)
Trip coil
➅
Power supply circuit
Rectifier circuit
V1+
0V
➄
Microprocessor
➃ ASIC
Constant voltage
circuit
Setting input
➆
Trigger circuit
Power supply CT
V2+
Load current LED
60-80-100-OVER
PAL LED
CPU
N1
N2
Z1
Z2
Ground fault Integration/
composition circuit
and Earth leakage circuit
Test
connector
W.D.T.
Trip indicator LED
➇
Power supply
with contact output
513
Alarm contact control circuit
A/D
Characteristics and Alarm s/w
Phase selection
sampling
RUN, ERR. LED
Integration circuit
➁
Current sensor coil
➀
Characteristic Setting module
➂
I/O
534
544
554
564
574
V2+
N
524
RESET
CIRCUIT
RS1
RS2
Control power
circuit
P1
P2
P4
0V
FG
Lower side terminal
➀ Power supply CT
Energy is supplied for the operation of the overcurrent tripping and ground fault tripping(GFR) function of the
electronic trip relay.
➁ Current sensor coil
The current in each phase flowing through the breaker is detected. A air core coil which has good linearity is adopted.
➂ Power supply circuit
This part converts power supply CT energy to constant voltage for respective circuits in the ETR.
➃ ASIC
This ASIC ampplifies the signal detected by the current sensor coil and the detected signal of ground fault current
which is vector composed from the detected signals of each phases.
➄ Microprocessor
The microprocessor integrates each phase current waveforms from the ASIC and performs processing for overcurrent
protection and others.
➅ Characteristic setting module
The module for the characteristic setting of the ETR.
➆ Several LEDs
The load current LED give a figure of current in percent by CT energy.
Trip indicator and pre-alarm are indicated by control power supply.
RUN and ERR. LED indicate breaker's condition by control power supply or ten-odd percent of CT energy.
37
➇ Power supply with contact output
This outputs contact signal at fault cause (including pre-alarm) and at other alarms.
A control supply is necessary for this function.
Setting procedure
1 Prepare a small flat tipped screwdriver.
0.8mm max. 6mm max.
Press the screwdriver in the direction
of the arrow to open the cover
Side view of the flat tip
ETR cover
2 Insert the flat tipped screwdriver into the opening of the ETR cover.
Then, lightly turn the screwdriver to the upside as shown in the left
figure, and the ETR cover will open.
Sealing hole
Operating hole for resetting
3 There are two kinds of switches for characteristics setting and for trip
indicator reset. They should be used as follows.
➀ Adjustable in steps
Rotary code switch is used. Do not set the switch at points
between steps. The setting value is same when the switch is
positioned at the thick line. (Set the switch with a torque of
0.02N•m or below.)
Note) If the switch is set at points between steps, the
characteristics setting value will be decided at either end of
steps.
(XIu)
➁ Push-button
This is for temporary operation, and press it with force of 3N or
less.
➀Adjustable
in steps
➁Push-button
4 When the characteristic is set up, use a device like a field tester, etc
to make sure that the required characteristic has been set.
5 At sealing, seal the ETR cover by using the sealing hole at the top of
the ETR cover.
Sealing hole
38
Power supply
97
+
C1
Reset circuit
Power circuit
564
554
544
534
524
STD/INST
LTD
FG
Dielectric test forbidden
Electronic trip relay
Terminal description
39
P20
D1
+
+
413
U1
M
C2
A2
DT2 DT1
Short
bar
414
U2
Open to trip
(less than 2m)
Electrical operation circuit
P14
P12~14
Accessory Symbols
13
14
~
53
54
Auxiliary switch "a"
11
12
~
51
52
Auxiliary switch "b"
U1
U2
Motor charging
413
414
Charged signal (Normal open)
Voltage Input terminal of UVT
D1
D2
DT1
DT2
A1
A2
Closing coil
C1
C2
Shunt trip
SHT
Shunt tripping device
CC
Closing coil
M
Motor(Motor charging device)
UVT
UVT coil
Trip terminal of UVT (Remote trip)
97
98
OCR alarm
P1
P2
Power supply for ETR
FG of power supply (FG:Frame Ground)
RS1
RS2
Alarm reset (Trip cause LED, alarm contact)
513
524
Alarm contact for LTD Trip
513
534
Alarm contact for STD or INST Trips
513
544
Alarm contact for Ground fault, Earth leakage trips or 2nd Pre-alarm contact
513
554
Pre-alarm contact
513
564
Temperature alarm contact
513
574
Error alarm contact
Z1
Z2
For external ZCT
N1
N2
For Neutral CT
Extension terminals
98
OCR
alarm
Control power circuit / alarm contact
P19~38
P4
CC
ZCT *
* Voltage forbid to be applied
Main circuit
574
G1/E1/AP
P4
PAL
Z2
TAL
NCT *
Z1
SHT
UVT
ERR
N2
+
D2
Alarm contacts
Electronic trip
relay(ETR)
N1
+
A1
Charged
P2
UVT
Controller
P1
AL
513
CLS
+
RS1 RS2
ON
See Fig.1.
Cut-off switch
Extension terminals
Less than 2m
OFF
L1 L2 L3 N
Common
RESET
(for Power supply
P3, P4 and P5)
● The following diagram shows the case that accessories are fully equipped.
(Note)
For external display DP2
For Interface unit
For VT unit
AX
Auxiliary switch
AL
OCR alarm switch
CLS
Charge limit switch
SBC
Shorting b-contact
CL
Cell switch
Internal wiring
External wiring (user's wiring)
Control circuit connecter (drawout type)
Control circuit terminal block
VT
VT unit
I/F-1
I/F-2
Display
Interface unit
Terminal placement
N1 Z1 RS1 513 564 544 524 P1 97 C1 A1 DT1 D1 413 U1 51 41
31 21
11 53
43
33 23 13
N2 Z2 RS2 P4 574 554 534 P2 98 C2 A2 DT2 D2 414 U2 52 42
32 22
12 54 44
34 24 14
+
+
Extended terminal
Breaker
+
+
+
11
53
+
43
+
33
+
23
+
13
+
42
32
22
12
54
44
Breaker
34
24
14
Auxiliary switch(normal close)
380-460V AC type
input
IN2
D1
332
324
322
314
312
Cell switch
P17
Note;
input
D2
334
P14
Fig.1
UVT controller wiring
+
342
Auxiliary switch(normal open)
P14
100-120V AC type
200-240V AC type
DC types
344
311
Cell switch
ON
OFF
52
321
CL
CL
331
CL
341
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
+
CL
21
SBC
31
SBC
41
SBC
51
+
SBC
+
SBC
+
IN1
external unit
OUT4
OUT3
D2
D1
● On the drawout type, the cables should have the length which allow the control circuit
terminal block to be moved to the left or right by 5mm.
● When a coil load is connected in the same control circuit as the ETR, surge absorbers are
required to absorb the surge voltage.
● OCR alarm (AL)
The contact output of the OCR alarm(Standard type AL) is the one-pulse output and the
output time is 30~50ms.
For this reason, this output needs self-holding circuit.
● For Power supply type P3 and P4, the high sensitive relay used in contact output may cause
the chattering noise (wrong output of 1ms level) during ON and OFF operation, depending
on the Panel placing condition. When it used in the quick responsive sequence, the filter
circuit of a few milli-second (ms) should be provided or the double reading sampling should
be implemented.
● Closing coil (CC)
As CC is one-pulse driven, it is not necessary to insert AXb for burning prevention purposes.
Inserting AXb will cause anti-pumping function to be ineffective.
● Under voltage trip device (UVT)
Use the switch that can open and close DC150V, 0.5A to remote trip.
Remote trip terminal has short bar at shipment, so remove it before using this function.
Disconnect the voltage input wires during dielectric testing of main circuit.
● Alarm contacts 513 , 524 ~ 574 are also reset by removing P1 , P2 power supply
voltage. (longer than 1sec.)
● From some terminals are polarized, the wiring should be done correctly as to the polarity
shown in the wiring diagram when the control voltage is DC. Auxiliary switch (AX) Standard
type has no polarity.
● Alarm reset (Terminal: RS1 and RS2) is available only for Power supply type P3, P4 and P5.
In case of Power supply type P1 and P2, it can not be reset from the Control circuit terminal
block (RS1 and RS2).
40
Drawout type AE630-SW,AE1000-SW, AE1250-SW, AE1600-SW
(mm)
Side view
Front face of control terminal
4P
Horizontal
(standard)
terminal
*200
149
48
368
Fully drawout
position
15
Earth terminal
M8 screw
23
*220
452
234(149)
172
40
Panel
4-φ14
15
53
25
40
15
15
50
17
42.5
Front
terminal
132
132
430
340
Aperture for the
drawout handle
Vertical
terminal
15
Neutral pole
50
3P
Lifting hook hole
283
66
57
15
61
366
* : Mounting pitch
The numerals shown in
parentheses are for 3 poles.
Inside of the panel
(thickness 1.6~3.2)
Rear view
Horizontal terminal
Vertical terminal
85
Front terminal
Operating panel center
Operating panel center
Operating panel center
85
85
85
85
85
85
85
85
50
Neutral pole
Insulation
block
50
50
Neutral
pole
Outline
of breaker
4P
3P
15
Outline
of breaker
Neutral
pole
4P
Outline
of breaker
3P
4P
Main circuit terminal dimension
Horizontal terminal(standard)
Vertical terminal
Front terminal
38
Connecting area
2-φ13
50
25
15
41
369
Test 35
228
92
Disconnected 54
117
235(150)
370
150
Control terminal
(M3.5 screw)
92
Operating panel center
100
Front view
3P
Drawout type AE2000-SWA
(mm)
Front view
Side view
Operating panel center
150
235(150)
Control terminal
(M3.5 screw)
Front face of control terminal
Disconnected 54
Test 35
228
Lifting hook hole
283
3P
4P
370
57 100
340
430
Aperture for the
drawout handle
157
Neutral pole
*200
149
40
Panel
4-ø14
48
452
234(149)
Fully drawout
position
* : Mounting pitch
The numerals shown in
parentheses are for 3 poles.
100
172
*220
29.5
25
40
42.5
79.5
15
17
23
104
368
Earth terminal
M8 screw
366
Inside of the panel
(thickness 1.6~3.2)
Rear view
Operating panel center
115
Operating panel center
105
105
115
10
10
105
10
Neutral
pole
Outline
of breaker
3P
Outline
of breaker
4P
Main circuit terminal dimension
Connecting area
100
15
25 25 25
38
4-φ13
42
Drawout type AE2000-SW, AE2500-SW, AE3200-SW
(mm)
Front view
Side view
Operating panel center
Control terminal
(M3.5 screw)
Front face of control terminal
Disconnected 54
324(194)
368
61
366
Fully drawout
position
T
83
Earth terminal
M8 screw
Dimensions
23
*220
452
Inside of the panel (thickness 1.6~3.2)
* : Mounting pitch
The numerals shown in
parentheses are for 3 poles.
57
T
(mm)
Type
T
AE2000-SW AE2500-SW
AE3200-SW
20
25
Rear view
Horizontal terminal(standard)
23
130
130
Front terminal
Vertical terminal
Operating panel center
Operating panel center
Operating panel center
23
130
130
130
23
130
130
130
130
W
Insulation
block
W
T
Outline
of breaker
Outline
of breaker
4P
3P
Neutral pole
4P
Neutral pole
Outline
of breaker
3P
Neutral pole
4P
3P
Main circuit terminal dimensions
Connecting area
15
4-φ13
34
Connecting area
15
5-φ13
125
W
25 25 25
15
43
38
Front terminal
4-φ13
Dimensions
(mm)
W
Connecting area
25 25 25 25
38
Vertical terminal
25 25 25
Horizontal terminal(standard)
369
53
25
48
67
T
40
239
172
40
Panel
4-φ14
92
15
17
42.5
132
182
132
430
340
Aperture for
the drawout
handle
T
125
T
Neutral pole
*200
Front
terminal
Horizontal
(standard) Vertical
terminal
terminal
4P
125
3P
Lifting hook hole
283
92
Test 35
228
370
325(195)
240
Type
W
AE2000-SW AE2500-SW
AE3200-SW
95
103
Drawout type AE4000-SWA
(mm)
Front view
Side view
Operating panel center
Control terminal
(M3.5 screw)
Front face of control terminal
Lifting hook hole
Disconnected 54
325(195)
Test 35
228
Connecting busbar size
All poles:
T10xW150x4BUS/pole
283
Neutral pole
25
40
67
15
17
42.5
*200
Panel
4-φ14
Earth terminal
M8 screw
23
368
109
366
Fully drawout
position
* : Mounting pitch
The numerals shown in
parentheses are for 3 poles.
172
*220
452
324(194)
239
40
48
370
430
125
Aperture for
the drawout
handle
182
4P
340
3P
125
240
Inside of the panel (thickness 1.6~3.2)
Rear view
Operating panel center
Operating panel center
23
190
170
190
Outline
of breaker
52
10
Note) 11
170
43
170
Outline
of breaker
52
10
Note) 11
197
242
Neutral pole
327
242
4P
3P
Note) Spacers are not required when fastening connecting conductors (T10). The necessary contact area can be obtained with ACB terminal bent by tightening the screw.
Main circuit terminal dimension
Connecting area
125
20
25 25 25 25
48
5-φ13.5
44
Drawout type AE4000-SW, AE5000-SW, AE6300-SW
(mm)
Front view
Side view
Neutral pole
Control terminals
(M3.5 screw)
588.5(458.5)
Operating panel
center
373.5
28
228
Front face of
control terminal
Disconnected 54
28
Test 35
4P
HN
3P
Lifting hook hole
M12 Weld nut
283
Mounting angle
Fixing bolts
2-M12
Panel
42.5
4-M12
*530
395
172
* : Mounting pitch
The numerals shown in
parentheses are for 3 poles.
48
*220
400
610(480)
14 or more
Earth terminal
M8 screw
23
368
123
Bus bar
366
Fully drawout
position
Aperture for the drawout handle
420
117
75
15
90
177
17
345.5
182
125
340
480
Drawout handle
radius 100
125
Insulation block
Inside of the panel (thickness 1.6~3.2)
Main circuit terminal dimension
Rear view
Operating panel center
2-M12 for mounting
*431.5
262
262
25
Mounting angle
(non-magnetic steel)
W
14
235
Connecting area
*382
25
125
196
53
25 25 25 25
42.5
*561.5(431.5)
Outline of breaker
5-φ13
103
(mm)
Dimensions
4P
HN
3P
W
T
AE4000-SW AE5000-SW
100
20
AE6300-SW
105
25
Type
T
The mounting angle should be prepared by the customer.
4P FN type
Front view
Rear view
Control terminals
(M3.5 screw)
588.5
Operating panel
center
28
503.5
Neutral pole
2-M12 for mounting
Neutral pole
28
228
Operating panel center
*692.5
262
Mounting angle
(non-magnetic steel)
*430.5
88.5
262
262
W
14
235
*382
90
177
Drawout handle
radius 100
42.5
*42.5
399.5
6-M12
*714
525
610
Aperture for the drawout handle
Side view dimensions are same as 3 pole.
45
Fixing bolts
2-M12
T
Fixed type AE630-SW, AE1000-SW, AE1250-SW, AE1600-SW
(mm)
Front view
Side view
Operating panel center
142
227(142)
275
3P
93.5
Control terminal
(M3.5 screw)
139
4P
15
132
72
4-φ14
410
340
7
350
15
Neutral pole
40
5
Earth terminal
M8 screw
(Left side)
228
Panel
*156
170
*241(156)
290
255(170)
288
* : Mounting pitch
The numerals shown in
parentheses are for 3 poles.
31
*175
40
Earth terminal
M8 screw
(Left side)
Inside of the panel
(thickness 1.6~3.2)
Rear view
Operating panel center
85
85
85
50
Neutral pole
Outline of breaker
4P
Main circuit terminal dimension
Lifting hooks (HP)
Connecting
area
HP is supplied with ACB Fixed type.
21
φ23.5
2-φ13
122
50
17
25
38
3P
71
46
Fixed type AE2000-SWA
(mm)
Front view
Side view
Operating panel center
142
227(142)
93.5
Control terminal
(M3.5 screw)
275
3P
139
4P
410
350
340
57 100
7
157
Neutral pole
228
*156
*241(156)
170
24.5
40
5
Earth terminal
M8 screw
(Left side)
31
*175
Panel
290
255(170)
Earth terminal
M8 screw
(Left side)
108
288
* : Mounting pitch
The numerals shown in
parentheses are for 3 poles.
74.5
100
4-φ14
Inside of the panel
(thickness 1.6~3.2)
Rear view
Operating panel center
115
Operating panel center
115
105
10
105
10
105
10
Neutral pole
Outline of breaker
Outline of breaker
3P
4P
Main circuit terminal dimension
38
Connecting
area
Lifting hooks (HP)
HP is supplied with ACB Fixed type.
21
φ23.5
122
100
25 25 25
15
71
4-φ13
47
Fixed type AE2000-SW, AE2500-SW, AE3200-SW
(mm)
Front view
Side view
Operating panel center
Control terminal
(M3.5 screw)
317(187)
232
93.5
139
275
132
20
4-φ14
40
5
Earth terminal
M8 screw
(Left side)
228
*175
Panel
*331(201)
*246
31
290
345(215)
260
410
340
7
350
20
Neutral pole
4P
72
3P
40
Earth terminal
M8 screw
(Left side)
288
* : Mounting pitch
The numerals shown in
parentheses are for 3 poles.
Inside of the panel
(thickness 1.6~3.2)
Rear view
Operating panel center
130
130
23
130
95
Neutral pole
Outline of breaker
4P
Main circuit terminal dimension
Connecting area
Lifting hooks (HP)
HP is supplied with ACB Fixed type.
21
φ23.5
4-φ13
95
122
17
25 25 25
38
3P
71
48
Fixed type AE4000-SWA
(mm)
Front view
Side view
Operating panel center
232
Control terminal
(M3.5 screw)
317(187)
93.5
275
Connecting busbar size
All poles:
T10xW150x3BUS/pole
139
Neutral pole
4P
410
182
340
57
7
350
125
3P
228
Panel
*246
*175
*331(201)
290
345(215)
260
4.5
40
5
Earth terminal
M8 screw
(Left side)
67
129.5
4-φ14
31
117
Earth terminal
M8 screw
(Left side)
288
* : Mounting pitch
The numerals shown in
parentheses are for 3 poles.
Inside of the panel (thickness 1.6~3.2)
Rear view
Operating panel center
23
152
Operating panel center
30.5
145
145
152
145
31
31
Note) 11
Note) 11
10
10
Outline
of breaker
3P
Outline
of breaker
Neutral
pole
4P
Note) Spacers are not required when fastening connecting conductors (T10). The necessary contact area can be obtained with ACB terminal bent by tightening the screw.
Main circuit terminal dimension
48
Lifting hooks (HP)
HP is supplied with ACB Fixed type.
Connecting area
21
φ23.5
122
125
25 25 25 25
20
71
5-φ13.5
49
Fixed type AE4000-SW, AE5000-SW, AE6300-SW
(mm)
Front view
Side view
Control terminals
(M3.5 screw)
Neutral pole
581.5(451.5)
Bus bar
275
93.5
4P
HN
354
57
7
182
340
125
3P
139
14 or more
366.5
414
Operating panel
center
4-φ14
9
72.5
135
Earth terminal
M8 screw
(Left side)
228
*595.5(465.5)
*175
Panel
290
609.5(479.5)
394.5
10
40
*380.5
31
Earth terminal
M8 screw
(Left side)
136
288
* : Mounting pitch
The numerals shown in
parentheses are for 3 poles.
Inside of the panel (thickness 1.6~3.2)
Rear view
Main circuit terminal
dimension
Lifting hooks
(HP)
HP is supplied with
ACB Fixed type.
Operating panel center
42.5
197
262
53
262
20
φ23.5
122
25 25 25 25
20
Outline of breaker
4P
HN
21
Connecting area
25
100
125
Neutral
pole
3P
71
5-φ13
4P FN type
Front view
Earth terminal
M8 screw
(Left side)
Rear view
Operating panel
center
496.5
Control terminals
(M3.5 screw)
581.5
275
Neutral
pole
Neutral pole
Operating panel center
89
263
263
263
100
20
4-φ14
228
*510.5
*595.5
524.5
609.5
Side view dimensions are same as 3 pole.
50
Panel cut-out, Drawout handle, Terminal adapter, Condenser trip device
Panel cut-out dimensions
Door frame panel cut-out dimensions
Panel cut-out dimensions
7.7
Operating panel center
8-φ7
Operating panel center
Outline
Breaker
mounting frame
15
C
φ13
D
Mtg.holesφ13
(mm)
Connecting area
AE630-SW~1600-SW
115
AE3200-SW
25
Fixed
type
Up side
Down side
Drawout type
Fixed
AE2000-SW,2500-SW type
Up side
Down side
Drawout type
AE3200-SW
Fixed
type
Up side
Down side
Drawout type
Drawout handle dimensions
17
T
258.5
50
15
145
50
15
145
50
15
258.5
95
20
145
95
20
145
95
20
258.5
95
25
145
95
25
145
103 25
2-φ8
2-M6 Mounting screw
200
4-M4 screw
(for wiring)
R6
4-
75
110.5
φ10
4
14
16
45
φ100
Condenser
trip device
169
200
D
Condenser trip device (COT)
max 173
45
45
87
110
Breaker
Front view
T
C
Side view
45
20
D
Dimensions
T
AE2000-SW,2500-SW
42
34
53
100
37.5
φ13
Type
38
(mm)
φ13
25 25 25
Connecting area
15
T
25 25 25 25
50
15
Connecting area
Dimensions
φ13
25
125
50
25
25
15
φ13
Type
AE630~
AE2000~
1600-SW 3200-SW
φ13
25 25 25
15
38
100
51
179
245
Front terminal adapter
AE2000~3200-SW
15
38
195
295
T
AE630~1600-SW
15
175
235
271
Vertical terminal adapter
φ13
A
Breaker mounting frame
* : 345(Fixed type)
38
405
345
A
324
381
A
247
235
(mm)
Type
AE630-SW~AE1600-SW Fixed Type
AE2000-SW~AE3200-SW
AE2000-SWA, AE4000-SWA Drawout Type
Fixed Type
AE4000-SW~AE6300-SW
Drawout Type
357
*350
Dimensions
Drilling plan
Neutral CT (NCT), External ZCT
Neutral CT (NCT)
630~2000A
2500~4000A
5000, 6300A
2
240
30
M5
screw
M5
screw
162
68
4
M5
screw
51
160
105
137
219
295
5.5
220
97
R6
R3
16.5
31
40
R2
28
9
38
142
66
Slit for
M8
screw
192 Mounting pitch
Slit for
M10
screw
Slit for
M10
screw
55
212
87
F
E
30
28
70
External ZCT for load circuits
Terminals
M3.5 screw
Terminals
M3.5 screw
Mounting
pitch
285 Mounting pitch
328
External ZCT for transformer ground wire
A
40
90
11
48
122 Mounting pitch
12
7.7
Terminals
M3.5 screw
C
E
3
2
C
C
B
B
200
D
G
B
D
K
Slit for M5
screw
❋H
❋40
E
52
Slit for M5
screw
❋Mounting pitch
Dimensions
(mm)
A
B
C
D
E
F
G
❋100
❋70
A
90
❋D/2
❋Mounting pitch
Dimensions
H
(mm)
A
B
C
D
❋72
A
❋D
Slit for M8
screw
92
❋Mounting pitch
Dimensions
E
(mm)
A
B
C
D
E
ZT15B
48 15 29 62 46 15 70 25
ZT60B
140 60 73 150 46
ZCT163 230 60 323 250 47
ZT30B
68 30 37 82 66 30 90 50
ZT80B
160 80 82 169 48
ZCT323 370 108 460 400 47
ZT40B
85 40 43 92 81 40 100 50
ZT100B 185 100 93 190 50
ZCT324 500 108 600 550 48
ZCT with primary conductors
ZTA1200A (1200A)
ZTA2000A (2000A)
214
227
360
197
320
176
140
CL
117
φ11
M10 bolt
38
203
10 78.5
75
25
15
38
95
CL
CL
130
594
250
118
CL
298
24
32
16
73
φ11
slit
45
φ13
M12 bolt
φ13 slit
52
UVT external unit
UVT external unit (380 ~ 460V AC)
30
30
20
Mounting bracket
Height from
Undersurface to
Terminal
connecting part
Terminal
IN1
IN2
OUT OUT
3
4
(mm)
Use the attached
mounting bracket.
(Not applicable to
IEC35mm rail)
Terminal
117
107
100
UVT
external unit
IN1
380-460V
AC
OUT4
65
30
IN2
30
Mounting ø4.5 long hole
90
OUT3
To UVT controller
through D1 & D2 (UVT
Voltage input terminal)
ETR external units
Display onto panel board (DP2)
(mm)
Operation display surface
64
48
Panel (Note)
42
16
Note : Use the panel of thickness 1mm ~ 3.2mm.
64
Panel attachment metal
49
1
R≤
51
64 max.
48
29.5
64
48
64
Upper side
3
Operation display
surface side
Panel attachment metal
Fixed screw M3
DP2 connection cable
connection position (connector)
Surface plate
hole dimension
CC-Link®, MODBUS® interface unit (BIF-CC, BIF-MD)
(mm)
77.5
30
Mounting bracket
5
Terminal
90
23.5
37.5
67.5
IEC35mm
rail holder
65
30
Terminal
Frame Ground
M3 terminal screws
53
35
117
IEC35mm rail
107
100
30
FG
P1 P2 SLD DG DB DA
IEC35mm
rail holder
Power supply
(100-240V AC•DC)
CC-Link®
30
Mounting φ4.5 long hole
Frame Ground
Ter Ter FG
P1 P2 COM T/R- T/R+ SLD
Power supply
(100-240V AC•DC)
MODBUS®
I/O unit (BIF-CON)
(mm)
100
77.5
30
30
Mounting bracket
5
90
35
Terminal
117
107
IEC35mm rail
23.5
37.5
67.5
IEC35mm
rail holder
65
Terminal
30
30
Input
M3 terminal screws
Mounting φ4.5 long hole
K12 K22 K32 K11
C2 C1 A2 A1 U2 U1
IEC35mm
rail holder
Shunt trip
(SHT)
Closing coil
(CC)
Motor charging
(MD)
PROFIBUS-DP interface unit (BIF-PR)
(mm)
100
77.5
30
30
Mounting bracket
5
Terminal
90
35
107
117
IEC35mm rail
23.5
67.5
37.5
IEC35mm
rail holder
65
30
Terminal
30
Mounting φ4.5 long hole
P1 P2 FG
M3 terminal screws
Power supply
(100-240V AC•DC)
IEC35mm
rail holder
Frame Ground
VT unit (VT)
(mm)
20
Terminal
Terminal
Height from
Undersurface
to Terminal
connecting part
30
30
Mounting bracket
IEC35mm rail
IEC35mm
rail holder
65
90
30
Terminal
35
117
107
100
5
30
Mounting φ4.5 long hole
V1 V2 V3 VN
Line voltage inputs(To AE-SW main circuit)
IEC35mm
rail holder
Disconnect the voltage input wires during dielectric testing of main circuit.
54
Pre-cautions when making connections
Use M12 bolts, plain washers, and spring lock washers to connect the conductor. There are various size plain washers,
but use 24mm or smaller outside diameter washers. The washers may overlap if too large washers are used.
It is recommended to apply silver plating on the contact surface of the conductor which is used to connect with the
terminal of circuit breakers in order to prevent the increase of contact resistance due to moisture, etc. Tin plating or
nickel plating may be applied, but quickly connect with the circuit breaker terminal if nickel plating is applied because
nickel plating is less resistant to sulfur dioxide
gas.
Clean the contact surface and securely tighten
25mm
the bolts with a correct torque (M12: 40 to 50
Plain
N•m).
washer
The terminal which is applicable to connect
the conductor is different depending on the
shape of the terminal. Refer to the outline
Conductor (plating)
dimensions of P.41 to P.50.
25
ACB Terminal (silver plating)
Standard tightening torque
Screw size
Tightening torque(N•m)
M12
40~50
Plain
washer
Since fault current flowing through the conductors cause large electromagnetic forces,the conductors should be
secured firmly, using the values in the below table as a reference. Max. distance between fixing support and ACB
bus bar should be less than 200mm.
Electromagnetic force in N per 1m conductor
(in the case of three phase short circuit)
AE2000-SWA
AE630-SW~
AE1600-SW
Type
Bus bar
Conductor distance(mm)
85
(N)
AE4000-SWA
AE2000-SW~
AE3200-SW
AE4000-SW~
AE6300-SW
Fixed type
Drawout type
3-Pole
4-Pole
3-Pole
4-Pole
3-Pole
4-Pole
115
105
130
190
170
152
145
262
Prospective fault current kA(pf)
AE–SW
Max.200mm
Fixing support
30(0.2)
7700
5700
6300
5100
3500
3900
4300
4500
2500
42(0.2)
15100
11200
12200
9900
6800
7600
8500
8900
5000
50(0.2)
21400
15800
17300
14000
9600
10700
12000
12600
7000
65(0.2)
36100
26700
29300
23600
16200
18100
20200
21200
11800
75(0.2)
-
-
-
31500
21500
24100
26900
28200
15800
85(0.2)
-
-
-
40400
27600
30900
34500
36200
20000
100(0.2)
-
-
-
-
-
-
-
-
27800
130(0.2)
-
-
-
-
-
-
-
-
47000
When selecting conductors to be connected to AE breakers, please ensure
that they have a sufficient current capacity. Refer to the right table.
Conductor Size(IEC 60947-1; Ambient Temp. 40°C , Open air)
Rated current
Max.(A)
Quantity
Conductor size(mm)
630
2
40 x 5
1000
2
60 x 5
1250
2
80 x 5
1600
2
100 x 5
2000
3
100 x 5
2500
4
100 x 5
3150(3200)*1
3
100 x 10
4
150 x 10
4000
 AE4000-SWA 
 Fixed type 
3
150 x 10
4000
(AE4000-SW)
4
100 x 10
5000
4
150 x 10
6300
4
200 x 10
4000
 AE4000-SWA 
 Drawout type 
55
Connecting conductors(copper bus bar)
Arrangement
The left table shows the suitable connecting conductor size
based on IEC 60947-1, which is assured from the test under
Ambient temp. 40°C, Open air and testing configuration as
shown in the following drawing.
3m
AE–SW
With long
surface vertical
2m
*1 The temperature rise of rated current 3200A conforms to the requirement of IEC 60947-1 for
the connecting conductor size of a rated current 3150A. In case of more than 3200A,
conductor sizes are not defined in IEC 60947-1.
Insulation distance
When a short-circuit current is interrupted, discharged hot gas blows out from the exhaust port of the arc
extinguishing chamber, so provide a clearance as shown in the following table.
Note1:On the fixed type, maintenance is possible with
following clearance.
Dimensions
A
D
A
Electrical equipment,appliances or screen
B
Side
plate
B
Type
C
Mounting
surface
(mm)
AE630-SW~AE3200-SW
AE2000-SWA AE4000-SWA
Applicable voltage
A
B
Fixed type
C
D
A
B
Drawout type
C
D
600V AC or less
(Note 1) 0
(Note 3) 50
162
(Note 2) 50
0
(Note 3) 50
240
(Note 2) 50
660V AC, 690V AC
(Note 1) 100
(Note 3) 50
162
(Note 2) 50
100
(Note 3) 50
240
(Note 2) 50
AE4000-SW~
AE6300-SW
690V AC or less
(Note 1) 200
(Note 3) 50
200
200
(Note 3) 50
(Note 2) 200
Note1:300mm or more clearance is necessary to inspect the arc-extinguishing chamber and contacts.
Note2:The wiring space reguired for the control terminal block.
Note3:When using mechanical interlock, door interlock ,etc., dimension B becomes larger.
Service conditions
1. Normal service condition
Under ordinary conditions the following normal working conditions
are all satisfied, the AE Series air circuit breaker may be used
unless otherwise specified.
1. Ambient temperature
A range of max. +40°C to min. -5°C is recommended.
And the average over 24 hours must not exceed +35°C.
2. Altitude
2,000m(6,600 feet) or less
3. Environmental conditions
The air must be clean, and the relative humidity must be 85%
or less at max. temp. +40°C.Do not use and store in
atmospheres with sulfide gas and ammonia gas etc.
(H2S ≤ 0.01ppm, SO2 ≤ 0.1ppm, NH3 < a few ppm.)
4. Installation conditions
When installing the AE Series air circuit breaker, refer to the
installation instructions in the catalogue and instruction
manual.
5. Storage temperature
A range of max. +60°C to min. -20°C is recommended to be
stored.
And the average over 24 hours must not exceed +35°C.
6. Guideline for replacement
Within approx. 15 years.Please refer to the instruction
manual.
2. Special service conditions
In case of special service condition, service life may become
shorter in some cases.
1. Special environmental conditions
High temperature and/or high humidity
Corrosive gas
2. High ambient temperature
If the ambient temperature exceeds +40°C, the uninterrupted
current rating will be reduced. Since the derating value is
different depending on the applicable standard, refer to P58.
3. High altitude
Since the heat radiation rate is reduced for use at the 2,000m
or higher, accordingly the operating voltage, continuous
current capacity and breaking capacity are derated.
Moreover the insulation durability is also decreased owing to
the atmospheric pressure.
Please inquire us for further detail.
Guarantee
1. Free guarantee period
The free guarantee period of the product is one year from the
day of purchase.
2. Scope of guarantee
(1) We will repair the product free of charge within the guarantee
period on condition that it has been used under the standard
working conditions in conformity with the operating conditions,
operating procedures, environmental conditions and
instructions specified in the catalogs, manuals and caution
labels on the product body.
(2) In the following cases, the product will be repaired at your
expense even within the free guarantee period.
• Failure caused by your improper storage or handling,
carelessness or negligence
• Failure caused by inadequacies of installation
• Failure caused by mis-operation or improper modification
• Failure caused by external factors due to acts of God, such
as fire and abnormal votage, and natural disasters, such as
earthquake, windstorm and flood
• Failure caused by reasons that could not be foreseen on
the level of science and technology at the time of delivery
The term “guarantee” used in this section refers to the guarantee
only of the delivered product. We are not liable to compensate
for any damage induced by the failure of the delivered product.
3. Repair parts supplying period
The supply of the repair parts is warranted for 5 years after
discontinuation of the production. The supply is terminated as
soon as the repair parts run out after the 5 years.
56
Internal resistance, reactance and power consumption (per pole)
Type
Connection
Internal
resistance
(mΩ)
Reactance
(mΩ)
Power
consumption
(W)
Fixed type
0.028
0.059
11
Drawout type
0.042
0.089
17
Fixed type
0.026
0.060
26
Drawout type
0.040
0.091
40
Fixed type
0.024
0.060
38
Drawout type
0.038
0.091
60
Fixed type
0.016
0.063
41
Drawout type
0.030
0.095
77
Fixed type
0.016
0.063
64
Drawout type
0.025
0.095
100
Fixed type
0.010
0.047
40
Drawout type
0.020
0.071
80
Fixed type
0.008
0.047
50
Drawout type
0.018
0.071
113
Fixed type
0.007
0.048
72
Drawout type
0.014
0.072
143
Fixed type
0.009
0.048
144
Drawout type
0.015
0.072
240
Fixed type
0.010
0.038
160
Drawout type
0.013
0.062
210
Fixed type
0.009
0.038
225
Drawout type
0.011
0.062
275
Fixed type
0.008
0.038
318
Drawout type
0.0085
0.062
340
AE630-SW
AE1000-SW
AE1250-SW
AE1600-SW
AE2000-SWA
AE2000-SW
AE2500-SW
AE3200-SW
AE4000-SWA
AE4000-SW
AE5000-SW
AE6300-SW
The above values are applicable for one pole. (at brandnew product)
57
Deratings by ambient temperature
(Table 1) Deratings of Max. rated current by ambient temperature
(A)
IEC60947-2, BS, JIS C 8201-2-1 (Standard:40°C)
Standard
LR, GL, BV, DNV, ABS, NK, CCS (Standard:45°C)
Ambient Temperature
40°C
45°C
50°C
55°C
60°C
AE630-SW
630
630
630
630
630
AE1000-SW
1000
1000
1000
1000
1000
AE1250-SW
1250
1250
1250
1250
1200
AE1600-SW
1600
1600
1600
1550
1500
AE2000-SWA
2000
2000
1900
1800
1700
AE2000-SW
2000
2000
2000
2000
2000
AE2500-SW
2500
2500
2500
2450
2350
AE3200-SW
3200
3200
3200
3000
2900
AE4000-SWA
4000
4000
4000
3800
3600
AE4000-SW
4000
4000
4000
3900
3750
AE5000-SW
5000
5000
5000
5000
4750
AE6300-SW
6300
6300
5750
5500
5200
(Table 2) Deratings of Max. rated current by ambient temperature
with Extension module, Display and Network
In case extension module (EX1), display (DP1) and network are attached, the following derating values shown in this table are applied.
(A)
IEC60947-2, BS, JIS C 8201-2-1 (Standard:40°C)
Standard
LR, GL, BV, DNV, ABS, NK, CCS (Standard:45°C)
Ambient Temperature
40°C
45°C
50°C
AE630-SW
630
630
630
AE1000-SW
1000
1000
1000
AE1250-SW
1250
1250
1250
AE1600-SW
1600
1600
1440
AE2000-SWA
2000
1900
1700
AE2000-SW
2000
2000
2000
AE2500-SW
2500
2500
2500
AE3200-SW
3200
3200
2880
AE4000-SWA
4000
3800
3600
AE4000-SW
4000
4000
3750
AE5000-SW
5000
5000
4750
AE6300-SW
6300
5750
5200
The above table shows the maximum rated current per each ambient temperature for drawout type breaker with vertical connection
(at brandnew product), when breaker and bus bar are installed in open air.
Connection bus bar is according to IEC60947-1. For AE3200-SW, AE4000-SWA, AE4000-SW, AE5000-SW and AE6300-SW,
it is required to follow the manufacturer recommended size shown in Page 55.
As for ambient temperature exceeding 60°C, please inquire us.
58
Discrimination table
AE-SW Series air circuit breakers provide easy selective co-ordination with branch circuit breakers.
For selective co-crdinations,refer to the following table.
AC230V sym kA
Un
it b
rea
ki
AE-SW
Main circuit
breaker
AE630-SW AE1000-SW AE1250-SW AE1600-SW AE2000-SWA AE2000-SW AE2500-SW AE3200-SW AE4000-SWA AE4000-SW AE5000-SW AE6300-SW
ng
c ap
Branch
ac i
ty
65
65
65
65
65
85
85
85
85
130
130
130
circuit breaker
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
NF32-SV
7.5
10
10
10
10
10
10
10
10
10
10
9(10)
10
NV32-SV
10
NF63-SV
15
15
15
15
15
15
15
15
15
15
9(10)
15
15
NV63-SV
NF
|
S
•
NV
|
S
•
NF
|
L
•
NF
|
H
•
NV
|
H
NF
|
C
•
NV
|
C
NF
|
U
NF63-HV
NV63-HV
NF125-SV
NV125-SV
NF125-SEV
NV125-SEV
NF125-SGV
NF125-LGV
NF125-HV
NV125-HV
NF125-HGV
NF160-SGV
NF160-LGV
NF160-HGV
NF250-SV
NF250-SEV
NV250-SV
NV250-SEV
NF250-SGV
NF250-LGV
NF250-HV
NF250-HEV
NV250-HV
NV250-HEV
NF250-HGV
NF400-SW
NV400-SW
NF400-SEW
NV400-SEW
NF400-HEW
NV400-HEW
NF400-REW
NV400-REW
NF630-SW
NV630-SW
NF630-SEW
NV630-SEW
NF630-HEW
NV630-HEW
NF630-REW
NF800-SEW
NV800-SEW
NF800-HEW
NV800-HEW
NF800-REW
NF63-CV
NV63-CV
NF125-CV
NV125-CV
NF250-CV
NV250-CV
NF400-CW
NV400-CW
NF630-CW
NV630-CW
NF800-CEW
NF125-RGV
NF125-UV
NF250-RGV
NF250-UV
NF400-UEW
NF800-UEW
25
25
25
25
25
25
25
25
50
50
50
50
50
50
50
50
50
50(65)
50(65)
85
85
85
85
85
85
85
65
65
65
65
85
85
85
85
85
85
85
85
85
90
85
90
85
90
65
65
65
100
100
100
100
100
100
100
65
40(65)
40(65)
40(65)
65
65
65
65
65
65
65
65
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
100
85
90
100
100
85
90
100
100
85
90
100
20(65)
22(65)
42(65)
42(65)
50(85)
85
85
85
85
85
85
9.4(65)
9.4(65)
25(65)
25(65)
40(65)
40(65)
65
65
65
65
85
85
85
85
85
85
85
85
85
90
85
90
85
90
100
9(65)
25(65)
40(65)
65
65
85
85
85
85
100
100
100
100
9.4(65)
25(65)
40(65)
65
65
85
85
85
85
100
100
100
85
—
—
20(65)
30(65)
30(65)
48(75)
70(75)
85
85
85
85
85
85
9(65)
15(65)
20(65)
30(65)
30(65)
48(75)
70(75)
85
85
85
85
85
100
9(65)
15(65)
20(65)
30(65)
30(65)
48(75)
70(75)
85
85
100
100
100
150
9(65)
15(65)
20(65)
30(65)
30(65)
48(75)
70(75)
85
85
130
130
130
85
—
—
—
24(65)
24(65)
30(75)
40(75)
60(75)
60(75)
75(85)
75(85)
75(85)
85
—
15(65)
18(65)
24(65)
24(65)
30(75)
40(75)
60(75)
60(75)
75(85)
75(85)
75(85)
100
—
15(65)
18(65)
24(65)
24(65)
30(75)
40(75)
60(75)
60(75)
75(100)
75(100)
75(100)
150
—
15(65)
18(65)
24(65)
24(65)
30(75)
40(75)
60(75)
60(75)
75(100)
75(100)
75(100)
85
—
—
18(65)
24(65)
24(65)
30(75)
40(75)
60(75)
60(75)
75(85)
75(85)
75(85)
100
—
—
18(65)
24(65)
24(65)
30(75)
40(75)
60(75)
60(75)
75(100)
75(100)
75(100)
150
—
—
18(65)
24(65)
24(65)
30(75)
40(75)
60(75)
60(75)
75(100)
75(100)
75(100)
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
30
9(30)
15(30)
18(30)
24(30)
24(30)
30
30
30
30
30
30
30
36
9(36)
15(36)
18(36)
24(36)
24(36)
36
36
36
36
36
36
36
50
—
15(50)
20(50)
27(50)
27(50)
42(50)
50
50
50
50
50
50
50
—
—
—
24(50)
24(50)
30(50)
40(50)
50
50
50
50
50
—
65
65
9(65)
9(65)
9(65)
—
—
65
65
65
65
15(65)
—
18(50)
65
65
65
65
18(65)
18(65)
24(50)
65
65
65
65
29(65)
24(65)
24(50)
65
65
65
65
29(65)
24(65)
30(50)
85
85
85
85
48(75)
30(75)
40(50)
85
85
85
85
85
37(75)
50
85
85
85
85
85
68(75)
50
85
85
85
85
85
68(75)
50
130
130
130
130
130
85(100)
50
130
130
130
130
130
85(100)
50
130
130
130
130
130
85(100)
25
25
9(25)
25
50
9(50)
45(50)
50
85
9(65)
45(65)
50(65)
85
90
16(65)
16(65)
45(65)
45(65)
65
65
100
9(65)
50(65)
100
85
90
100
16(65)
9.4(65)
9.4(65)
9.4(65)
45(65)
25(65)
25(65)
25(65)
85
9(65)
85
90
50
150
200
150
200
200
200
25
• The values in the table represent the max.rated current for both Series AE-SW air circuit breakers and branch breakers,and the selective co-ordination applies when the AE-SW series air circuit
breakers instantaneous pick up is set to maximum.
• The numerals shown in parentheses are for AE-SW with MCR.(When set MCR).
59
AC440V sym kA
Un
it b
rea
ki
AE-SW
Main circuit
breaker
AE630-SW AE1000-SW AE1250-SW AE1600-SW AE2000-SWA AE2000-SW AE2500-SW AE3200-SW AE4000-SWA AE4000-SW AE5000-SW AE6300-SW
ng
cap
Branch
aci
ty
65
65
65
65
65
85
85
85
85
130
130
130
circuit breaker
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
NF32-SV
2.5
5
5
5
5
5
5
5
5
5
5
5
5
NV32-SV
5
NF63-SV
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
NV63-SV
NF63-HV
10
10
10
10
10
10
10
10
10
10
9(10)
10
10
NV63-HV
30
30
30
30
30
30
30
30
30
30
9(30)
NF63-HRV
30
30
NF125-SV
30
30
30
30
30
30
30
30
25(30)
20(30)
7(30)
30
30
NV125-SV
NF125-SEV
36
36
36
36
36
36
36
30(36)
25(36)
20(36)
7(36)
36
36
NV125-SEV
36
36
36
36
36
36
36
36
36
20(36)
9(36)
NF125-SGV
36
36
50
50
50
50
50
50
50
50
36(50)
20(50)
9(50)
NF125-LGV
50
50
NF125-HV
50
50
50
50
50
50
50
50
50
30(50)
9(50)
50
50
NV125-HV
65
65
65
65
65
65
65
65
36(65)
20(65)
NF125-HGV
9(65)
65
65
NF NF160-SGV
36
36
36
36
36
36
36
36
25(36)
15(36)
9(36)
36
36
| NF160-LGV
50
50
50
50
50
50
42(50)
42(50)
25(50)
15(50)
9(50)
50
50
S NF160-HGV
65
65
65
65
65
65
42(65)
42(65)
25(65)
15(65)
9(65)
65
65
•
NF250-SV
NV
NF250-SEV
36
36
36
36
36
36
25(36)
25(36)
19(36)
14(36)
7(36)
36
36
|
NV250-SV
S
NV250-SEV
•
36
36
36
36
36
36
36
36
25(36)
15(36)
NF250-SGV
7(36)
36
36
NF
50
50
50
50
50
50
42(50)
42(50)
25(50)
15(50)
NF250-LGV
7(50)
50
50
|
NF250-HV
L
NF250-HEV
•
70
70
70
70
70
70
42(65)
42(65)
25(65)
15(65)
7(65)
70
70
NF NV250-HV
NV250-HEV
|
65
65
65
65
65
65
42(65)
42(65)
25(65)
15(65)
7(65)
65
65
H NF250-HGV
NF400-SW
•
45
45
45
45
45(45)
33(45)
24(45)
24(45)
18(45)
—
—
45
45
NV400-SW
NV
NF400-SEW
|
50
50
50
50
39(50)
30(50)
24(50)
24(50)
18(50)
15(50)
9(50)
50
50
H NV400-SEW
NF400-HEW
70
70
70
70
39(70)
30(70)
24(65)
24(65)
18(65)
15(65)
9(65)
70
70
NV400-HEW
NF
|
C
•
NV
|
C
NF
|
U
NF400-REW
NV400-REW
NF630-SW
NV630-SW
NF630-SEW
NV630-SEW
NF630-HEW
NV630-HEW
NF630-REW
NF800-SEW
NV800-SEW
NF800-HEW
NV800-HEW
NF800-REW
NF63-CV
NV63-CV
NF125-CV
NV125-CV
NF250-CV
NV250-CV
NF400-CW
NV400-CW
NF630-CW
NV630-CW
NF800-CEW
NF125-RGV
NF125-UV
NF250-RGV
NF250-UV
NF400-UEW
NF800-UEW
125
9(65)
50
—
50
—
18(65)
24(65)
24(65)
30(75)
39(75)
80
80
100
100
100
—
—
24(50)
24(50)
30(50)
37(50)
50
50
50
50
50
15(50)
18(50)
24(50)
24(50)
30(50)
37(50)
50
50
50
50
50
15(65)
70
—
15(65)
18(65)
24(65)
24(65)
30(70)
37(70)
48(70)
48(70)
70
70
70
125
—
15(65)
18(65)
24(65)
24(65)
30(75)
37(75)
48(75)
48(75)
75(100)
75(100)
75(100)
50
—
—
18(50)
24(50)
24(50)
30(50)
37(50)
48(50)
48(50)
50
50
50
70
—
—
18(65)
24(65)
24(65)
30(70)
37(70)
48(70)
48(70)
70
70
70
125
—
—
18(65)
24(65)
24(65)
30(75)
37(75)
48(75)
48(75)
75(100)
75(100)
75(100)
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
10
9(10)
10
10
10
10
10
10
10
10
10
10
10
25
9(25)
15(25)
18(25)
25
25
25
25
25
25
25
25
25
36
—
15(36)
18(36)
24(36)
24(36)
25(36)
36
36
36
36
36
36
36
—
—
—
24(36)
24(36)
30(36)
36
36
36
36
36
36
36
125
200
125
200
200
200
—
35(65)
50(65)
9(65)
9(65)
9(65)
—
—
65
65
50(65)
65
15(65)
—
18(36)
65
65
65
65
18(65)
18(65)
24(36)
65
65
65
65
29(65)
24(65)
24(36)
65
65
65
65
29(65)
24(65)
30(36)
85
85
85
85
48(75)
30(75)
36
85
85
85
85
85
37(75)
36
85
85
85
85
85
68(75)
36
85
85
85
85
85
68(75)
36
125
130
125
130
130
85(100)
36
125
130
125
130
130
85(100)
36
125
130
125
130
130
85(100)
• The values in the table represent the max.rated current for both Series AE-SW air circuit breakers and branch breakers,and the selective co-ordination applies when the AE-SW series air circuit
breakers instantaneous pick up is set to maximum.
• The numerals shown in parentheses are for AE-SW with MCR.(When set MCR).
60
Ordering information for Mitsubishi AE-SW series air circuit breaker
(General use....WS Type, Special use....WB Type, Protective coordination use....WF Type)
Customer(name)
Type
P9~10
Order No.
AE
-SW
Number of poles
AE
4P
3P
AE4000-SW~
AE6300-SW
AE630-SW~
AE4000-SWA
Current setting Ir
A
IEC 60947-2
CCC
Ambient temperature
40°C(Standard)
Others
Fixed type
Main circuit
terminal
Horizontal terminal(FIX)
P.11
4P HN
4P FN
3P
Applicable standard
Connection
Drawout type
Note3
(AE630~1600-SW / AE2000~3200-SW)
Vertical terminal(FIX-VT)
/ AE4000-SWA
( AE2000-SWA
)
AE4000~6300-SW
Type
Note15
Note15
P17~18
Drawout type accessories
Cell switch(CL: 1 or 2 or 3 or 4) Note5
Shorting b-contact(SBC: 1 or 2 or 3 or 4 or 5)
Lifting hooks(HP)
Safety shutter(SST)
Shutter lock(SST-LOCK)
Mis-insertion preventor(MIP)
Test jumper(TJ)
Note1 P9,P20
°C
Note2
Note3
Horizontal terminal(DR)(standard)
Vertical terminal(DR-VT)
AE2000-SWA / AE4000-SWA
AE4000~6300-SW
Front terminal(DR-FT)
Electronic trip relay(ETR)
With ETR
Vertical terminal adapter(VTA)
Front terminal adapter(FTA)
Note4
Reset type
Automatic Reset (Standard)
EXAMPLE
Additional function
● Optional setting module
Note6
G1: Ground fault protection
AE630–1600-SW,
WS1, WB1, WF1 AE2000–3200-SW,
AE4000-SW
AE2000-SWA,
WS2, WB2, WF2 AE4000-SWA,
AE5000-SW
WS3, WB3, WF3 AE6300-SW
WS : General use
WB : INST only
WF : Protective coordination use
Note7
● Power supply
P1: 100-240V
P34
P2: 24-60V DC
P3: 100-240V AC / 100-125V DC
with output contact
P4: 24-60V DC with output contact
AP: 2nd Additional Pre-alarm
NA: Without optional setting
Neutral CT(NCT)
● ETR Auxiliary Equipment
Temperature alarm(TAL)
MCR switch(MCR-SW) P32
61
BIF-CC
BIF-PR
BIF-MD
BIF-CON
BIF-CL
Wire system (when EX1 is specified)
P30
and B contacts in the same quantity are used.
Auxiliary switch AMax.
quantity: 5 each for A and B contacts
Standard(AX
: 2 or 4 or 6 or 8 or 10)
High capacity(HAX
: 2 or 4 or 6 or 8 or 10)
100–125V AC • DC
Motor charging(MD)
200–250V AC • DC
24V DC Note10
48V DC
Closing coil(CC)
100–250V AC • DC
24–48V DC
Push button cover(BC-L)
Counter(CNT)
Cylinder lock(CYL)
Door interlock(DI) Note11
Terminal cover(TTC)
Door frame(DF)
Dust cover(DUC)
Interphase barrier(BA) Note12
Mechanical interlock(MI)
3φ3W
3φ4W
Note8
Note9
External ZCT
ZCT
EX1
Normal connection : Note13
Reverse connection : Note14
B
ZTA
100–250V AC • DC
380–500V AC
24–48V DC
Under voltage trip device(UVT)
100–120V AC
200–240V AC
Time delay
380–460V AC
Inst(INST)
24V DC
0.5s(05)
48V DC
3.0s(30)
Note:In case of 380-460V AC,
100–110V DC
the external transformer is attached
120–125V DC
P15~16
Network P35
P5: 100-240V DC with output contact (SSR)
Shunt trip device
(SHT)
Mechanical
accessories
AC•DC
E1: Earth leakage protection
ZT
P12~14
Display(DP1)
Display onto panel board(DP2)
VT unit(VT)
N5: Neutral pole 50% protection
BARE without ETR
Electrical
accessories
Can be connected to the
Horizontal terminals.
Manual Reset (MRE)
Extension module(EX1)
● Main setting module
units
-SWA
CT rating
A
Number of units
P16
Condenser trip device
(COT)
N o t e 1 : In case of AE630-SW and AE2000-SW Low rating type, please specify CT rating.
Refer to Page 9 and Page 20.
N o t e 2 : There is a case to be derated by ambient temperature. Refer to Page 58.
N o t e 3 : As for the terminal for AE2000-SWA, AE4000-SWA and AE4000-SW~AE6300-SW,
Vertical terminal type only is available. (FIX-VT or DR-VT)
N o t e 4 : Refer to Page 11 and Page 41-43.
N o t e 5 : This setting is available for change by customer later. A preliminary setting of CL at
factory shipment is as follows.
CL1: 1C
CL2: 1C1D
CL3: 1C1T1D
CL4: 2C1T1D
N o t e 6 : Not available for AE630-SW with CT rating : 250A or 315A or 500A.
N o t e 7 : Not available for WB1, WB2 and WB3 Main setting module.
N5 optional setting module is used for 3phase 4wires system.(4Pole breaker or 3pole
breaker with Neutral CT)
N o t e 8 : Neutral CT is required for Ground fault or Neutral pole protection, when 3 Pole breaker
is used for 3 phase 4 wires system.
Note9:
Note10:
Note11:
Note12:
In case of Earth leakage protection, it is required External ZCT.
DC24V and DC48V are not available for AE4000-SWA 4P and AE4000-SW~AE6300-SW.
The combined installation of DI and MI3 is not available.
Some module types are not provided BA. Refer to Page15.
Note13: Power Supply comes from the top terminals.
Note14: Power Supply comes from the bottom terminals.
Note15: Current capacity of the neutral poles
HN: 50% of the rated current
FN: 100% of the rated current (See page 45, 50 for the outline and dimensions.)
Remark
for 2units(MI2)
for 3units(MI3) Note11
100–110V AC
200–220V AC
Order Issuer
Ordering information for Mitsubishi AE-SW series air circuit breaker
(General use....WS Type, Special use....WB Type, Protective coordination use....WF Type)
Customer(name)
Type
P.9~10
Order No.
AE
-SW
Number of poles
AE
4P
3P
AE4000-SW~
AE6300-SW
AE630-SW~
AE4000-SWA
Current setting Ir
A
IEC 60947-2
CCC
Ambient temperature
40°C(Standard)
Others
Fixed type
Main circuit
terminal
Horizontal terminal(FIX)
P.11
4P HN
4P FN
3P
Applicable standard
Connection
Drawout type
Note3
(AE630~1600-SW / AE2000~3200-SW)
Vertical terminal(FIX-VT)
/ AE4000-SWA
( AE2000-SWA
)
AE4000~6300-SW
units
-SWA
CT rating
A
Number of units
Note15
Note15
P.17~18
Drawout type accessories
Cell switch(CL: 1 or 2 or 3 or 4) Note5
Shorting b-contact(SBC: 1 or 2 or 3 or 4 or 5)
Lifting hooks(HP)
Safety shutter(SST)
Shutter lock(SST-LOCK)
Mis-insertion preventor(MIP)
Test jumper(TJ)
Note1 P.9,P.20
°C
Note2
Note3
Horizontal terminal(DR)(standard)
Vertical terminal(DR-VT)
AE2000-SWA / AE4000-SWA
AE4000~6300-SW
Front terminal(DR-FT)
Electronic trip relay(ETR)
Vertical terminal adapter(VTA)
Front terminal adapter(FTA)
Note4
Reset type
Automatic Reset (Standard)
Can be connected to the
Horizontal terminals.
Manual Reset (MRE)
With ETR
Additional function
Type
P.34
Extension module(EX1)
● Main setting module
● Optional setting module
G1: Ground fault protection
AE630–1600-SW,
WS1, WB1, WF1 AE2000–3200-SW,
AE4000-SW
AE2000-SWA,
WS2, WB2, WF2 AE4000-SWA,
AE5000-SW
WS3, WB3, WF3 AE6300-SW
WS : General use
WB : INST only
WF : Protective coordination use
Note6
Note7
● Power supply
P1: 100-240V AC•DC
N5: Neutral pole 50% protection
P2: 24-60V DC
E1: Earth leakage protection
P3: 100-240V AC / 100-125V DC
with output contact
P4: 24-60V DC with output contact
AP: 2nd Additional Pre-alarm
NA: Without optional setting
Neutral CT(NCT)
● ETR Auxiliary Equipment
Temperature alarm(TAL)
MCR switch(MCR-SW) P32
100–250V AC • DC
380–500V AC
24–48V DC
Under voltage trip device(UVT)
100–120V AC
200–240V AC
Time delay
380–460V AC
Inst(INST)
24V DC
0.5s(05)
48V DC
3.0s(30)
Note:In case of 380-460V AC,
100–110V DC
the external transformer is attached
120–125V DC
P.15~16
BIF-CON
BIF-CL
P.30
Push button cover(BC-L)
Counter(CNT)
Cylinder lock(CYL)
Door interlock(DI) Note11
Terminal cover(TTC)
Door frame(DF)
Dust cover(DUC)
Interphase barrier(BA) Note12
Mechanical interlock(MI)
3φ3W
3φ4W
ZCT
EX1
Normal connection : Note13
Reverse connection : Note14
B
ZTA
and B contacts in the same quantity are used.
Auxiliary switch AMax.
quantity: 5 each for A and B contacts
Standard(AX
: 2 or 4 or 6 or 8 or 10)
High capacity(HAX
: 2 or 4 or 6 or 8 or 10)
100–125V AC • DC
Motor charging(MD)
200–250V AC • DC
24V DC Note10
48V DC
Closing coil(CC)
100–250V AC • DC
24–48V DC
Shunt trip device
(SHT)
Mechanical
accessories
BIF-CC
BIF-PR
BIF-MD
Wire system (when EX1 is specified)
Note8
Note9
External ZCT
ZT
P.12~14
Network P.35
P5: 100-240V DC with output contact (SSR)
BARE without ETR
Electrical
accessories
Display(DP1)
Display onto panel board(DP2)
VT unit(VT)
P.16
Condenser trip device
(COT)
100–110V AC
200–220V AC
N o t e 1 : In case of AE630-SW and AE2000-SW Low rating type, please specify CT rating.
Refer to Page 9 and Page 20.
N o t e 2 : There is a case to be derated by ambient temperature. Refer to Page 58.
N o t e 3 : As for the terminal for AE2000-SWA, AE4000-SWA and AE4000-SW~AE6300-SW,
Vertical terminal type only is available. (FIX-VT or DR-VT)
N o t e 4 : Refer to Page 11 and Page 41-43.
N o t e 5 : This setting is available for change by customer later. A preliminary setting of CL at
factory shipment is as follows.
CL1: 1C
CL2: 1C1D
CL3: 1C1T1D
CL4: 2C1T1D
N o t e 6 : Not available for AE630-SW with CT rating : 250A or 315A or 500A.
N o t e 7 : Not available for WB1, WB2 and WB3 Main setting module.
N5 optional setting module is used for 3phase 4wires system.(4Pole breaker or 3pole
breaker with Neutral CT)
N o t e 8 : Neutral CT is required for Ground fault or Neutral pole protection, when 3 Pole breaker
is used for 3 phase 4 wires system.
Note9:
Note10:
Note11:
Note12:
In case of Earth leakage protection, it is required External ZCT.
DC24V and DC48V are not available for AE4000-SWA 4P and AE4000-SW~AE6300-SW.
The combined installation of DI and MI3 is not available.
Some module types are not provided BA. Refer to Page15.
Note13: Power Supply comes from the top terminals.
Note14: Power Supply comes from the bottom terminals.
Note15: Current capacity of the neutral poles
HN: 50% of the rated current
FN: 100% of the rated current (See page 45, 50 for the outline and dimensions.)
Remark
for 2units(MI2)
for 3units(MI3) Note11
Order Issuer
62
Ordering information for Mitsubishi AE-SW series air circuit breaker
(Generator protection use....WM Type)
Customer(name)
Type
Order No.
AE
P.9~10
-SW
Number of poles
AE
4P
3P
AE630-SW~
AE4000-SWA
Current setting Ir
A
AE4000-SW~
AE6300-SW
LR
GL
Ambient temperature
40°C(Standard)
Connection
Fixed type
Main circuit
terminal
Horizontal terminal(FIX)
BV
DNV
4P HN
4P FN
3P
ABS
(AE630~1600-SW / AE2000~3200-SW)
Vertical terminal(FIX-VT)
/ AE4000-SWA
( AE2000-SWA
)
AE4000~6300-SW
CCS
Note15
Note15
P.17~18
Drawout type accessories
Cell switch(CL: 1 or 2 or 3 or 4) Note5
Shorting b-contact(SBC: 1 or 2 or 3 or 4 or 5)
Lifting hooks(HP)
Safety shutter(SST)
Shutter lock(SST-LOCK)
Mis-insertion preventor(MIP)
Test jumper(TJ)
IEC 60947-2
°C
Others
Drawout type
Note3
units
-SWA
Note1
Applicable standard
P.11
Number of units
Note2
Note3
Horizontal terminal(DR)(standard)
Vertical terminal(DR-VT)
AE2000-SWA / AE4000-SWA
AE4000~6300-SW
Front terminal(DR-FT)
Electronic trip relay(ETR)
Vertical terminal adapter(VTA)
Front terminal adapter(FTA)
Note4
Reset type
Automatic Reset (Standard)
Can be connected to the
Horizontal terminals.
Manual Reset (MRE)
With ETR
Additional function
Type
P.34
Extension module(EX1)
● Main setting module
● Optional setting module
G1: Ground fault protection
AE630–1600-SW,
AE2000–3200-SW,
AE4000-SW
AE2000-SWA,
WM2 AE4000-SWA,
AE5000-SW
WM3 AE6300-SW
WM : Generator protection use
Note7
WM1
P.12~14
E1: Earth leakage protection
P3: 100-240V AC / 100-125V DC
with output contact
P4: 24-60V DC with output contact
P5: 100-240V DC with output contact (SSR)
Temperature alarm(TAL)
MCR switch(MCR-SW) P32
63
P.30
BIF-CC
BIF-PR
BIF-MD
BIF-CON
BIF-CL
Wire system (when EX1 is specified)
Note8
3φ3W
3φ4W
Note9
External ZCT
EX1
ZCT
ZT
B
Normal connection : Note13
Reverse connection : Note14
ZTA
)
and B contacts in the same quantity are used.
Auxiliary switch AMax.
quantity: 5 each for A and B contacts
Standard(AX
: 2 or 4 or 6 or 8 or 10)
High capacity(HAX
: 2 or 4 or 6 or 8 or 10)
100–125V AC • DC
Motor charging(MD)
200–250V AC • DC
24V DC Note10
48V DC
Closing coil(CC)
100–250V AC • DC
24–48V DC
100–250V AC • DC
380–500V AC
24–48V DC
Under voltage trip device(UVT)
100–120V AC
200–240V AC
Time delay
380–460V AC
Inst(INST)
24V DC
0.5s(05)
48V DC
3.0s(30)
Note:In
case of 380-460V AC,
100–110V DC
the external transformer is attached
120–125V DC
P.15~16
Neutral CT(NCT)
● ETR Auxiliary Equipment
Shunt trip device
(SHT)
Mechanical
accessories
AC•DC
P2: 24-60V DC
NA: Without optional setting
P.23,24,27~29
Electrical
accessories
P1: 100-240V
Network P.35
Display(DP1)
Display onto panel board(DP2)
VT unit(VT)
N5: Neutral pole 50% protection
AP: 2nd Additional Pre-alarm
Specify a setting value,if required.
LTD pick-up current : IL
LTD time: TL
STD pick-up current : Isd
STD time: Tsd
INST pick-up current:Ii
Pre-alarm current:Ip
Othters (
Note6
● Power supply
Push button cover(BC-L)
Counter(CNT)
Cylinder lock(CYL)
Door interlock(DI) Note11
Terminal cover(TTC)
Door frame(DF)
Dust cover(DUC)
Interphase barrier(BA) Note12
Mechanical interlock(MI)
P.16
Condenser trip device
(COT)
N o t e 1 : Please specify current setting (Ir) from the specification table.
Refer to Page 9 and 10.
N o t e 2 : There is a case to be derated by ambient temperature. Refer to Page 58.
N o t e 3 : As for the terminal for AE2000-SWA, AE4000-SWA and AE4000-SW~AE6300-SW,
Vertical terminal type only is available. (FIX-VT or DR-VT)
N o t e 4 : Refer to Page 11 and Page 41-43.
N o t e 5 : This setting is available for change by customer later. A preliminary setting of CL at
factory shipment is as follows.
CL1: 1C
CL2: 1C1D
CL3: 1C1T1D
CL4: 2C1T1D
N o t e 6 : Not available for AE630-SW with CT rating : 250A or 315A or 500A.
N o t e 7 : N5 optional setting module is used for 3 phase 4 wires system.(4 Pole breaker or 3 pole
breaker with Neutral CT)
N o t e 8 : Neutral CT is required for Ground fault or Neutral pole protection, when 3 Pole breaker
is used for 3 phase 4 wires system.
Note9:
Note10:
Note11:
Note12:
Note13:
Note14:
Note15:
In case of Earth leakage protection, it is required External ZCT.
DC24V and DC48V are not available for AE4000-SWA 4P and AE4000-SW~AE6300-SW.
The combined installation of DI and MI3 is not available.
Some module types are not provided BA. Refer to Page15.
Power Supply comes from the top terminals.
Power Supply comes from the bottom terminals.
Current capacity of the neutral poles
HN: 50% of the rated current
FN: 100% of the rated current (See page 45, 50 for the outline and dimensions.)
Remark
for 2units(MI2)
for 3units(MI3) Note11
100–110V AC
200–220V AC
Order Issuer
Country/Region
Corporation Name
Address
Telephone
Australia
Mitsubishi Electric Australia Pty. Ltd.
348 Victoria Road, Rydalmere, N.S.W. 2116, Australia
+61-2-9684-7777
Belarus
Tehnikon
Oktyabrskaya 19, Off. 705, BY-220030 Minsk, Belarus
+375 (0)17 / 210 46 26
Belgium
Koning & Hartman B.V.
Woluwelaan 31, BE-1800 Vilvoorde, Belgium
+32 (0)2 / 2570240
Rhona S.A.
Vte. Agua Santa 4211 Casilla 30-D (P.O. Box) Vina del Mar, Chile
+56-32-2-320-600
Mitsubishi Electric Automation (China) Ltd.
Mitsubishi Electric Automation Building, No.1386 Hongqiao Road, Shanghai,200336
+86-21-2322-3030
9/F, Office Tower1 Henderson Centre 18 Jianguomennei Dajie DongCheng district BeiJing 100005
+86-10-6518-8830
Chile
Mitsubishi Electric Automation (China) Ltd.
BeiJing Branch
China
Mitsubishi Electric Automation (China) Ltd.
Room 2512--2516, Great China International Exchange Square, Jintian Rd.S., Futian District,
ShenZhen Branch
Shenzhen, 518034
+86-755-2399-8272
Mitsubishi Electric Automation (China) Ltd.
Room 1609, North Tower, The Hub Center, No.1068, Xing Gang East Road, Haizhu District, GuangZhou, China
GuangZhou Branch
510335
Mitsubishi Electric Automation (China) Ltd.
Block B, Room 407-408, Shangri-La Center Offeice Builiding , No.9 BinJiang East Road, Chengdu, China
ChengDu Branch
610021
Mitsubishi Electric Automation (Hongkong) Ltd.
10/F., Manulife Tower, 169 Electric Road, North Point, Hong Kong
+852-2887-8810
Proelectrico Representaciones S.A.
Carrera 42 # 75-367 Bod 109 Itagui Colombia
+57-4-4441284
AUTOCONT CONTROL SYSTEMS S.R.O
Technologická 374/6, CZ-708 00 Ostrava - Pustkovec
+420 595 691 150
BEIJER ELECTRONICS A/S
LYKKEGARDSVEJ 17, DK-4000 ROSKILDE
+45 (0)46/ 75 76 66
Egypt
Cairo Electrical Group
9, Rostoum St. Garden City P.O. Box 165-11516 Maglis El-Shaab,Cairo - Egypt
+20-2-27961337
France
Mitsubishi Electric Europe B.V.
25, Boulevard des Bouvets, F-92741 Nanterre Cedex
+33 (0) 1 / 55 68 55 68
Germany
Mitsubishi Electric Europe B.V.
Gothaer Str. 8, 40880 Ratingen , Germany
+49 (0) 2102 486-0
KALAMARAKIS - SAPOUNAS S.A.
IONIAS & NEROMILOU STR., CHAMOMILOS ACHARNES, ATHENS, 13678 Greece
+30-2102 406000
UTECO
5, MAVROGENOUS STR., 18542 PIRAEUS, Greece
+30-211-1206-900
Meltrade Ltd.
Fertö utca 14. HU-1107 Budapest, Hungary
+36 (0)1-431-9726
Mitsubishi Electric India Private Limited
2nd Floor, Tower A&B, Cyber Greens, DLF Cyber City, DLF Phase-III, Gurgaon - 122 022 Haryana, India
+91-124-4630300
Mitlite Electric Co. Pvt. Ltd.
Plot No.32 G/F, Sector-6 IMT, Manesar, Haryana -122050, India
+91-124-469-5300
P. T. Sahabat Indonesia
P.O.Box 5045 Kawasan Industri Pergudangan, Jakarta, Indonesia
+62-(0)21-6610651-9
Ireland
Mitsubishi Electric Europe B.V.
Westgate Business Park, Ballymount, IRL-Dublin 24, Ireland
+353 (0)1-4198800
Israel
Gino Industries Ltd.
26, Ophir Street IL-32235 Haifa, Israel
+972 (0)4-867-0656
Italy
Mitsubishi Electric Europe B.V.
Viale Colleoni 7, I-20041 Agrate Brianza (MI), Italy
+39 039-60531
Kazpromavtomatika
ul. Zhambyla 28, KAZ - 100017 Karaganda
+7-7212-501000
Mitsubishi Electric Automation Korea Co., Ltd
1480-6, Gayang-Dong, Gangseo-Gu, Seoul, Korea
+82-2-3660-9572
Lebanon
Comptoir d'Electricite Generale-Liban
Cebaco Center - Block A Autostrade Dora, P.O. Box 11-2597 Beirut - Lebanon
+961-1-240445
Lithuania
Rifas UAB
Tinklu 29A, LT-5300 Panevezys, Lithuania
+370 (0)45-582-728
Malaysia
Mittric Sdn Bhd
No. 5 Jalan Pemberita U1/49, Temasya Industrial Park, Glenmarie 40150 Shah Alam,Selangor, Malaysia
+603-5569-3748
Malta
ALFATRADE LTD
99 PAOLA HILL, PAOLA PLA 1702, Malta
+356 (0)21-697-816
Maroco
SCHIELE MAROC
KM 7,2 NOUVELLE ROUTE DE RABAT AIN SEBAA, 20600 Casablanca, Maroco
+212 661 45 15 96
Peace Myanmar Electric Co.,Ltd.
NO137/139 Botahtaung Pagoda Road, Botahtaung Town Ship 11161,Yangon,Myanmar
+95-(0)1-202589
Watt&Volt House
KHA 2-65,Volt House Dillibazar Post Box:2108,Kathmandu,Nepal
+977-1-4411330
Imtech Marine & Offshore B.V.
Sluisjesdijk 155, NL-3087 AG Rotterdam, Netherlands
+31 (0)10-487-19 11
Mitsubishi Electric Automation, Inc.
500 Corporate Woods Parkway, Vernon Hills, IL 60061 USA
+847-478-2100
Scanelec AS
Leirvikasen 43B, NO-5179 Godvik, Norway
+47 (0)55-506000
Cebaco Center - Block A Autostrade Dora P.O. Box 11-1314 Beirut - Lebanon
+961-1-240430
Colombia
Czech Republic
Denmark
Greece
Hungary
India
Indonesia
Kazakhstan
Korea
Myanmar
Nepal
Netherlands
North America
Norway
Middle East
Arab Countries & Cyprus
Pakistan
Comptoir d'Electricite Generale-InternationalS.A.L.
+86-20-8923-6730
+86-28-8446-8030
+92-(0)42-35752323
Prince Electric Co.
2-P, GULBERG II,LAHORE - 54660 PAKISTAN
Edison Electric Integrated, Inc.
24th Fl. Galleria Corporate Center, Edsa Cr. Ortigas Ave., Quezon City Metro Manila, Philippines
+63-(0)2-634-8691
Mitsubishi Electric Europe B.V. Polish Branch
Krakowska 50, 32-083 Balice, Poland
+48 (0) 12 630 47 00
Intehsis SRL
bld. Traian 23/1, MD-2060 Kishinev, Moldova
+373 (0)22-66-4242
Sirius Trading & Services SRL
RO-060841 Bucuresti, Sector 6 Aleea Lacul Morii Nr. 3
+40-(0)21-430-40-06
Mitsubishi Electric Europe B.V. Moscow Branch
52, bld. 3 Kosmodamianskaya Nab. 115054, Moscow, Russia
+7 495 721-2070
Center of Electrical Goods
Al-Shuwayer St. Side way of Salahuddin Al-Ayoubi St. P.O. Box 15955 Riyadh 11454 - Saudi Arabia
+966-1-4770149
Mitsubishi Electric Asia Pte. Ltd.
307 Alexandra Road, Mitsubishi Electric Building, Singapore 159943
+65-6473-2308
PROCONT, Presov
Kupelna 1/, SK - 08001 Presov, Slovakia
+421 (0)51 - 7580 611
SIMAP
Jana Derku 1671, SK - 91101 Trencin, Slovakia
+ 421 (0)32 743 04 72
Inea RBT d.o.o.
Stegne 11, SI-1000 Ljubljana, Slovenia
+386 (0)1-513-8116
CBI-electric: low voltage
Private Bag 2016, ZA-1600 Isando Gauteng, South Africa
+27-(0)11-9282000
Mitsubishi Electric Europe B.V. Spanish Branch
Carretera de Rubí 76-80, E-08190 Sant Cugat del Vallés (Barcelona), Spain
+34 (0)93-565-3131
Euro Energy Components AB
Järnvägsgatan 36, S-434 24 Kungsbacka, Sweden
+46 (0)300-690040
TriElec AG
Muehlentalstrasse 136, CH-8201 Schaffhausen
+41-(0)52-6258425
Taiwan
Setsuyo Enterprise Co., Ltd
5th Fl., No.105, Wu Kung 3rd, Wu-Ku Hsiang, Taipei, Taiwan, R.O.C.
+886-(0)2-2298-8889
Thailand
United Trading & Import Co., Ltd.
77/12 Bamrungmuang Road,Klong Mahanak Pomprab Bangkok Thailand
+66-223-4220-3
Tunisia
MOTRA Electric
3, Résidence Imen, Avenue des Martyrs Mourouj III, 2074 - El Mourouj III Ben Arous, Tunisia
+216-71 474 599
Turkey
GTS
Philippines
Poland
Republic of Moldova
Romania
Russia
Saudi Arabia
Singapore
Slovakia
Slovenia
South Africa
Spain
Sweden
Switzerland
United Kingdom
Uruguay
Venezuela
Vietnam
+92-(0)42-35753373
+90 (0)216 526 3990
Mitsubishi Electric Europe B.V.
Travellers Lane, UK-Hatfield, Herts. AL10 8XB, United Kingdom
+44 (0)1707-276100
Fierro Vignoli S.A.
Avda. Uruguay 1274 Montevideo Uruguay
+598-2-902-0808
Adesco S.A.
Calle 7 La Urbina Edificio Los Robles Locales C y D Planta Baja, Caracas - Venezuela
+58-212-241-9952
CTY TNHH-TM SA GIANG
10th Floor, Room1006-1007,225 Tran Hung Dao St.,Co Giang Ward, Dist. 1,Ho Chi Minh City, Vietnam
+84-8-838-6727/28/29
64
MITSUBISHI LOW VOLTAGE AIR Circuit Breakers
For Safety : Please read the instruction manual carefully before using the products in this catalog.
Wiring and connection must be done by the person have a specialized knowledge of
electric construction and wiring.
Y-0622F 1203 (MDOC)
Revised publication, effective Mar. 2012.
Specifications subject to change without notice.
This pamphlet is made from recycled paper.