Operating and installation instructions
Oven
To avoid the risk of accidents or damage to the appliance it is essential
to read these instructions before it is installed and used for the first time.
en - GB
M.-Nr. 10 112 380
Contents
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Oven overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Oven controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
On/Off sensor K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Sensor controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Model numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Data plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Items supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Accessories supplied and available to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Side runners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Baking tray, universal tray and rack with non-tip notches . . . . . . . . . . . . . . . . 28
FlexiClip telescopic runners HFC72 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Fitting and removing FlexiClip telescopic runners . . . . . . . . . . . . . . . . . . . . . 29
Oven controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Safety features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
System lock 0 for the oven. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Safety switch-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Cooling fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Vented oven door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Door lock - Pyrolytic cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
PerfectClean treated surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Pyrolytic accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Basic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Heating up the oven for the first time and rinsing the steam injection system . . . 38
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Settings overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Opening the Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Changing and saving settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Language J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Time (of day) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Clock format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Entering settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
2
Contents
Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Display brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Buzzer tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Melody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Solo tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Keypad tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Cooling fan run-on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Pyrolytic (cleaning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Recommended temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
System lock 0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Sensor lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Catalyser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Showroom programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Demo mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Minute minder N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Using the minute minder N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
To set the minute minder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
To change the time set for the minute minder . . . . . . . . . . . . . . . . . . . . . . . . . 49
To cancel the time set for the minute minder . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Overview of functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Tips on saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Simple operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Cooling fan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Using the oven - further functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Changing the function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Changing the temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Rapid heat-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Pre-heating the oven. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Using the Crisp function (steam reduction) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Setting the duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
3
Contents
Switching off automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Switching on and off automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Sequence of a programme that switches on and off automatically . . . . . . . . . 62
Changing the set time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Cancelling cooking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Moisture plus d . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Moisture plus function d . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Setting the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Set the number of bursts of steam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
When to add the steam. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Preparing and starting the water intake process . . . . . . . . . . . . . . . . . . . . . . . 65
Changing the type of heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Automatic burst of steam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
1, 2 or 3 bursts of steam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Residual water evaporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
To start residual water evaporation immediately . . . . . . . . . . . . . . . . . . . . . . . 68
To skip residual moisture evaporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Automatic programmes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
List of food types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
To use an Automatic programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Notes on using these programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
User programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
To create a User programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
To start a User programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
To change User programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Change cooking stages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Change name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
To delete User programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Baking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Notes on the baking chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Baking chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Roasting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Notes on the roasting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Food probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
How the food probe works. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
When to use it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Important notes about using the food probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
4
Contents
Using the food probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Time left display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Switching between the time remaining and the core temperature displays . . 87
Using residual heat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Roasting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Low temperature cooking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Using the "Low temperature cooking" special application . . . . . . . . . . . . . . . . . . 91
Low temperature cooking - setting the temperature manually . . . . . . . . . . . . . . . 92
Grilling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Notes on the grilling chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Grilling chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Special applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Drying food . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Reheat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Heat crockery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Prove dough . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Pizza . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Sabbath programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Gentle bake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Frozen food / Ready meals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Unsuitable cleaning agents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Useful tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Normal soiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Food probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Stubborn soiling (does not apply to the FlexiClip runners) . . . . . . . . . . . . . . . . . 107
Pyrolytic cleaning ^ of the oven interior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Setting up for pyrolytic cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Starting pyrolytic cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
At the end of pyrolytic cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
If pyrolytic cleaning is cancelled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Removing the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Dismantling the door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Refitting the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Removing the side runners with FlexiClip runners . . . . . . . . . . . . . . . . . . . . . . . 118
Lowering the top heat/grill element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
5
Contents
Descaling the steam injection system F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Sequence of a descaling cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Carrying out the descaling process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Building-in diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Appliance and niche dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Front dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Installing the oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Miele|home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Note for test institutes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Test food acc. to EN 60350 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Energy efficiency class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Product data sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Addresses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
6
Warning and Safety instructions
This appliance complies with statutory safety requirements.
Inappropriate use can, however, lead to personal injury and
damage to property.
To avoid the risk of accidents and damage to the appliance,
please read these instructions carefully before using it for the first
time. They contain important notes on installation, safety, use and
maintenance.
Miele cannot be held liable for non-compliance with these
instructions.
Keep these instructions in a safe place and ensure that new users
are familiar with the contents. Pass them on to any future owner.
7
Warning and Safety instructions
Correct application
~ This oven is intended for use in domestic households and similar
working and residential environments.
~ The oven is not intended for outdoor use.
~ It is intended for domestic use only to cook food, and in particular
to bake, roast, grill, cook, defrost and dry food. Any other use is not
supported by the manufacturer and could be dangerous.
~ People with reduced physical, sensory or mental capabilities, or
lack of experience or knowledge who are not able to use the
appliance safely on their own must be supervised whilst using it.
They may only use it unsupervised if they have been shown how to
use it safely and recognise and understand the consequences of
incorrect operation.
8
Warning and Safety instructions
Safety with children
~ Children under 8 years of age must be kept away from the
appliance unless they are constantly supervised.
~ Children 8 years and older may only use the oven unsupervised if
they have been shown how to use it safely and recognise and
understand the consequences of incorrect operation.
~ Children must not be allowed to clean or maintain the appliance
unsupervised.
~ Please supervise children in the vicinity of the oven and do not let
them play with it.
~ Danger of suffocation. Packaging, e.g. plastic wrappings, must
be kept out of the reach of babies and children. Whilst playing,
children could become entangled in packaging or pull it over their
head and suffocate.
9
Warning and Safety instructions
~ Danger of burning.
Children's skin is far more sensitive to high temperatures than that of
adults. External parts of the oven such as the door glass, control
panel and the vents become quite hot during use. Do not let
children touch the oven whilst it is in use.
~ Danger of injury.
The oven door can support a maximum weight of 15 kg. Do not let
children sit on the door, lean against it or swing on it.
~ Danger of burning.
Children's skin is far more sensitive to high temperatures than that of
adults. The oven gets hotter during pyrolytic cleaning than it does in
normal use. Do not let children touch the oven whilst the Pyrolytic
cleaning programme is running.
10
Warning and Safety instructions
Technical safety
~ Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and
repairs must only be carried out by a Miele authorised technician.
~ Never use a damaged oven. It could be dangerous. Check it for
visible signs of damage before using it.
~ Reliable and safe operation of this oven can only be assured if it
has been connected to the mains electricity supply.
~ The electrical safety of this appliance can only be guaranteed
when correctly earthed. It is essential that this standard safety
requirement is met. If in any doubt please have the electrical
installation tested by a qualified electrician.
~ To avoid the risk of damage to the oven, make sure that the
connection data on the data plate (voltage and frequency) match
the mains electricity supply before connecting the oven to the
mains. Consult a qualified electrician if in doubt.
~ Do not connect the appliance to the mains electricity supply by a
multi-socket unit or an extension lead. These do not guarantee the
required safety of the appliance (fire hazard).
~ For safety reasons, this appliance may only be used after it has
been built in.
~ The oven must not be used in a non-stationary location
(e.g. on a
ship).
11
Warning and Safety instructions
~ Tampering with electrical connections or components and
mechanical parts is highly dangerous to the user and can cause
operational faults.
Never open the casing of the appliance.
~ While the appliance is under guarantee, repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
guarantee is invalidated.
~ Miele can only guarantee the safety of the appliance when
genuine original Miele replacement parts are used. Faulty
components must only be replaced by Miele spare parts.
~ If the connection cable is damaged or if the oven is supplied
without a cable, it must be replaced or fitted with a special
connection cable by a Miele authorised technician (see "Electrical
connection").
~ During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply, e.g. if the
oven lighting is faulty (see "Problem solving guide" and "Electrical
connection").
12
Warning and Safety instructions
~ In order to function correctly, the oven requires an adequate
supply of cool air. Ensure that the supply of cool air is not impaired
(e.g. by heat insulation strips in the housing unit). Please also ensure
that the cool air supply is not unduly heated by other heat sources
such as a solid fuel stove.
~ If the oven is installed behind a furniture panel (e.g. a door),
ensure that the door is never closed whilst the oven is in use. Heat
and moisture can build up behind a closed furniture panel and
cause subsequent damage to the oven, the housing unit and the
floor. Do not close the door until the oven has cooled down
completely.
13
Warning and Safety instructions
Correct use
, Danger of burning.
The oven becomes hot when in use.
You could burn yourself on the heating elements, oven interior,
cooked food or oven accessories.
Wear oven gloves when placing food in the oven, turning or
removing it and when adjusting oven shelves etc. in a hot oven.
~ Due to the high temperatures radiated, objects left near the oven
when it is in use could catch fire.
Do not use the oven to heat up the room.
~ Oil and fat can ignite if overheated. Never leave the oven
unattended when cooking with oil and fat.
If it does ignite do not put the flames out with water. Switch the oven
off immediately and then suffocate the flames by keeping the oven
door closed.
~ Grilling food for an excessively long time can cause it to dry out
with the risk of catching fire.
Do not exceed recommended grilling times.
14
Warning and Safety instructions
~ Some types of food dry out quickly and can self-ignite if high grill
temperatures are used. Never use the grill to finish baking
part-cooked rolls or bread or to dry flowers or herbs. Use Fan
plus U or Conventional heat V for this type of procedure.
~ If using alcohol in your recipes, please be aware that high
temperatures can cause the alcohol to vaporise. The vapour can
catch fire on hot heating elements.
~ When using residual heat to keep food in the oven warm, the high
moisture content and amount of condensation in the oven can cause
corrosion damage. The control panel, the worktop or the housing
unit can also suffer damage.
When using residual heat do not switch the oven off. Instead set the
temperature to the lowest setting and leave the oven on the selected
function. The fan will then remain on automatically and dissipate the
moisture.
~ Food which is stored in the oven or left in it to be kept warm can
dry out and the moisture released can lead to corrosion damage in
the oven. Always cover food that is left in the oven to keep warm.
~ A build-up of heat can cause the enamel on the floor of the oven
to crack or shatter.
Do not line the floor of the oven with anything, e.g. aluminium foil. Do
not place roasting pans, pots or baking trays directly on the oven
floor.
~ The enamelling on the oven floor can become damaged by items
being pushed around on it. If using the oven to store pots and pans,
ensure that you avoid pushing them around on the oven floor.
15
Warning and Safety instructions
~ If cold liquid is poured onto a hot surface steam will occur, which
can cause scalding. The sudden change in temperature can also
damage enamel surfaces.
Do not pour cold liquid directly onto hot enamelled surfaces.
~ During cooking processes using moisture and during the residual
moisture evaporation process steam is produced which can cause
serious injury by scalding.
Do not open the door whilst a burst of steam is being released or
during the evaporation process.
~ It is important that the temperature in the food being cooked is
evenly distributed and sufficiently high. Stir and / or turn it to ensure
even heat distribution.
~ Plastic containers which are not suitable for use in an oven can
melt at high temperatures and can even damage the oven or catch
fire.
Only use plastic containers which are declared by the manufacturer
as being suitable for use in an oven. Follow the manufacturer's
instructions on use.
~ Do not heat up food in closed containers e.g. tins or sealed jars in
the oven, as pressure will build up in the container, causing it to
explode.
~ You could injure yourself on the open oven door or trip over it.
Avoid leaving the door open unnecessarily.
~ The door can support a maximum weight of 15 kg.
Do not sit on or lean against an open door, and do not place heavy
objects on it. Also make sure that nothing can get trapped between
the door and the oven cavity. The oven could get damaged.
16
Warning and Safety instructions
Cleaning and care
~ Do not use a steam cleaning appliance to clean this appliance.
The steam could reach electrical components and cause a short
circuit.
~ Scratches on the door glass can result in the glass breaking. Do
not use abrasive cleaners, hard sponges, brushes or sharp metal
tools to clean the door glass.
~ The side runners can be removed for cleaning purposes (see
"Cleaning and care"). Ensure that they are replaced correctly and do
not use the oven without them fitted.
~ Coarse soiling should be removed before running the Pyrolytic
cleaning programme. If not removed, coarse soiling can smoke and
cause the Pyrolytic cleaning programme to switch itself off.
17
Warning and Safety instructions
Accessories
~ Only use genuine original Miele accessories. Using accessories
from other manufacturers will invalidate the guarantee, and Miele
cannot accept liability.
~ If you have a Miele HUB 5000-M, HUB 5001-M or a HUB 5000-XL
oven dish, do not place it on Shelf level 1.
This would damage the floor of the oven. The very small gap
between the bottom of the dish and the oven floor would cause a
build-up of heat and could cause the enamel to crack or chip.
Never place a Miele oven dish on the top rail of Shelf level 1 as it will
not be held securely in this position by the anti-tip notches on the
runners.
In general it is best to use Shelf level 2.
~ The high temperatures used during pyrolytic cleaning will
damage accessories that are not designed for cleaning in the
Pyrolytic programme.
Please remove these accessories from the oven interior before
starting the Pyrolytic cleaning programme. This also applies to
non-pyrolytic accessories purchased separately to the oven (see
"Cleaning and care").
~ Only use the Miele food probe supplied with this oven. If it is
faulty, it must only be replaced with a suitable original Miele food
probe.
18
Caring for the environment
Disposal of the packing
material
Disposing of your old
appliance
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
use of raw materials in the
manufacturing process and also
reduces the amount of waste in landfill
sites.
Electrical and electronic appliances
often contain valuable materials. They
also contain materials which, if handled
or disposed of incorrectly, could be
potentially hazardous to human health
and to the environment. They are,
however, essential for the correct
functioning of your appliance. Please
do not therefore dispose of it with your
household waste.
Please dispose of it at your local
community waste collection / recycling
centre or contact your Dealer for
advice.
Ensure that it presents no danger to
children while being stored for
disposal.
19
Oven overview
a Oven controls
b Door lock - Pyrolytic cleaning
c Top heat/grill element
d Steam inlet openings
e Water intake pipe for the steam injection system
f Connection socket for the food probe
g Air inlet for the fan with ring heating element behind it
h Side runners with 5 shelf levels
i Oven floor with bottom heat element underneath it
j Front frame with data plate
k Door
20
Oven controls
a On/Off sensor K
b C sensors for operating the oven
c Display
d 0–9 sensors (numerical keypad)
e *, #, I, N sensors
21
Oven controls
On/Off sensor K
The On/Off sensor K is recessed and reacts to touch.
It is used for switching the oven on and off.
Sensor controls
The sensors react to touch. Each touch is confirmed with a keypad tone. This
keypad tone can be switched off (see "Settings – Keypad tone").
Sensor Function
22
Notes
C
For selecting
Touch the illuminated C sensor beside the option
options and
to select it.
scrolling through
the list of options.
0–9
Numerical keypad The numerical keypad is used to set values, e.g.
for setting values temperatures and durations.
#
To go back a step
Oven controls
Sensor Function
Hinweise
I
For switching the If a list of options is showing in the display or if a
oven interior
cooking process is running, touching I will switch
lighting on and off the oven interior lighting on or off.
If the display is dark, the I sensor will not react until
the oven is switched on.
The oven interior lighting switches off after
15 seconds during a cooking process or remains
constantly switched on, depending on the setting
selected.
N
For setting the
minute minder
If a list of options is showing in the display or if a
cooking process is running, you can enter a minute
minder duration (e. g. when boiling eggs on the hob)
at any point.
If the display is dark, the N sensor will not react until
the oven is switched on.
*
For injecting the
bursts of steam
If manual bursts of steam are selected for the
Moisture plus function d, the bursts of steam are
injected by touching the * sensor.
The * sensor lights up when a burst of steam can be
injected.
* appears in the display when a burst of steam is
being injected.
23
Oven controls
Display
The display is used for showing the time of day or information about functions,
temperatures, cooking durations, automatic programmes and settings. Information
or a list of options is shown in the display depending on the function selected.
After switching the oven on with the On/Off sensor K, the main menu will appear:
–
–
–
–
–
–
Oven functions
Automatic programmes
Special applications
User programmes
Settings !
Maintenance
If a cooking process is running, selecting "Change" will call up a list of options
which can be set or changed for the cooking process in progress.
–
–
–
–
–
–
–
–
–
Temperature
Core temperature (only when using the food probe)
Duration
Ready at
Start at (only if "Duration"/"Ready at" have been set)
Heating-up phase (only for some functions)
Type of heating (only with Moisture plus d)
Crisp function (Moisture reduction)
Change function
^ Touch the illuminated C sensor beside the option to select it.
^ Then open the option by touching the illuminated C sensor next to "OK".
24
Oven controls
Symbols
The following symbols may also appear in the display in addition to the text:
Symbol
Explanation
N
Minute minder
-
Allocates an illuminated C to an option and indicates that
the option can be selected.
#
If more than four options are available a bar will appear on
the right-hand side of the display.
Use the allocated sensors to scroll through the list.
ZZZZZZZZZZZZZZZZZZZ The end of a list is indicated by a dotted line. By scrolling
down further, you reach the beginning of the list again.
P P P P G G GM Some settings, e. g. display brightness and buzzer volume
are selected using a bar chart.
(
A tick shows that a setting is active.
"-" will not appear in front of it and the sensor belonging to it
will not be illuminated.
:
This symbol indicates that there is additional information and
advice about using the oven.
Select "OK" to access the information.
0
The system lock is on (see "Settings - Safety"). The oven
cannot be used.
25
Oven controls
When a function is selected, the following symbols may appear in the display,
depending on setting:
Symbol
U
Fan plus
O
Intensive bake
d
Moisture plus
[
Auto roast
V
Conventional heat
W
Top heat
X
Bottom heat
P
Defrost
Y
Full grill
Z
Economy grill
\
Fan grill
K
Gentle bake
c
Automatic programme
^
Pyrolytic cleaning
*
Bursts of steam
O
Process finished
Q
26
Explanation
Core temperature when using the food probe
Features
Model numbers
A list of the ovens described in these
operating instructions can be found on
the back page.
Data plate
The data plate is located on the front
frame, visible when the door is open.
The data plate states the model number
of your oven, the serial number as well
as connection data (voltage, frequency
and maximum connected load).
Please have this information to hand,
should you need to contact Miele
regarding any questions or problems.
Items supplied
The oven is supplied with:
– the operating and installation
instructions for using the oven
functions,
Accessories supplied and
available to order
Accessories will vary depending on
model.
Your oven will be supplied with side
runners, a universal tray and a rack.
Depending on model, your oven may
also come supplied with some or
several of the accessories listed
here.
All the accessories listed as well as the
cleaning and care products are
designed for Miele appliances.
These can be ordered via the internet
at www.miele-shop.com, from Miele
(see end of manual for contact details)
or from your Miele dealer.
When ordering, please quote the model
number of your oven and the reference
number of the accessories required.
– a recipe booklet for Moisture plus d
and the Automatic programmes,
– screws for securing your oven in the
housing unit,
– descaling tablets and a plastic tube
with clip for descaling,
– various accessories.
27
Features
Side runners
Side runners for trays, racks and Miele
oven dishes are fitted on either side of
the oven cavity for shelf levels ‡.
Baking tray, universal tray and rack
with non-tip notches
Baking tray HBB71:
The numbers for the shelf levels are
marked on the front frame.
Each level consists of two rails, one
above the other.
Universal tray HUBB71:
– The accessories (e.g. the rack) are
pushed into the oven between the
rails,
– FlexiClip telescopic runners
(depending on model) are fitted on
the lower rail.
If necessary, the side runners can be
removed for cleaning (see "Cleaning
and care").
Rack HBBR72:
These accessories are inserted into the
oven between the two rails of a side
runner.
Always position the rack as illustrated
above.
The accessories have non-tip safety
notches half way along the short edges
which prevent them from being pulled
right out when they only need to be
pulled partially out.
If you are using the universal tray with
the rack on top, insert the tray between
the rails of the side runners and the
rack will automatically slide in above
them.
28
Features
FlexiClip telescopic runners HFC72
Fitting and removing FlexiClip
telescopic runners
,Danger of burning.
Make sure the oven heating
elements are switched off and cool.
The FlexiClip telescopic runners can be
used with any shelf level.
Push the FlexiClip telescopic
runners right into the oven before
placing accessories on them. The
accessories will then automatically
sit securely in between the stoppers
at either end of each runner and be
prevented from sliding off.
The FlexiClip runners are fitted in
between the two rails that make up a
shelf level.
The FlexiClip runner with the Miele logo
is fitted on the right.
When fitting the FlexiClip telescopic
runners do not extend them.
^ Hook the FlexiClip runner onto the
front of the lower rail of a side rail (1.)
and then push it along the rail into the
oven compartment (2.).
The FlexiClip runners can support a
maximum load of 15 kg.
29
Features
Perforated baking tray HBBL71
^ Then secure the FlexiClip runner to
the lower of the two rails as illustrated
(3).
If the FlexiClip runners are difficult to
pull out after fitting, you may need to
pull firmly on them once to release
them.
The perforated baking tray has been
specially designed for baking fresh
yeast and quark dough items, bread
and rolls.
The fine perforations help to brown the
underside of food.
The tray can also be used for drying
fruit and vegetables.
The enamelled surface has been
treated with PerfectClean.
Anti-splash insert HGBB71
To remove a FlexiClip runner:
^ Push the FlexiClip runner in all the
way.
^ Remove the FlexiClip runner by
raising it at the front (1) then pulling it
forwards along the rail and out (2).
30
The anti-splash insert fits in the
universal tray.
The juices from the food being grilled or
roasted collect under the insert. This
prevents them from spitting and making
the oven dirty. The juices can then be
used for making gravy and sauces.
The enamelled surface has been
treated with PerfectClean.
Features
Round baking tray HBF27-1
The round baking tray is suitable for
cooking pizza, shallow cakes made
with yeast or whisked mixtures, sweet
and savoury tarts, baked desserts, flat
bread, and can also be used for frozen
cakes and pizzas.
The enamelled surface has been
treated with PerfectClean.
Baking stone HBS60
The baking stone is ideal for items
which need a well baked base such as
pizza, quiche, bread, bread rolls and
savoury snacks.
The baking stone is made from heat
retaining fire brick and is glazed.
Place it directly on the rack.
A paddle made of untreated wood is
supplied with it for placing food on the
baking stone and taking it off.
HUB oven dishes and HBD oven dish
lids
The Miele oven dishes, unlike other
oven dishes, slide into the oven on the
side runners. They have non-tip safety
notches like the rack to prevent them
being pulled out too far.
They also have a non-stick coating.
The Miele oven dishes are either 22 cm
or 35 cm deep. The width and height
are the same.
Lids are also available. These are
ordered separately.
Please quote the model number of your
Miele oven dish when ordering.
Depth: 22 cm
Depth: 35 cm
HUB5000-M
HUB5001-M*
HUB5000-XL
HBD 60-22
HBD 60-35
* suitable for use on induction hobs
31
Features
Handle HEG
The handle makes it easier to take the
universal tray, baking tray and rack out
of the oven, or to put them into it. The
two prongs at the top go inside the tray
or above the rack, and the U-shape
supports underneath.
Descaling tablets, plastic tube with
suction cup
These are required for descaling the
appliance.
Food probe
Using the food probe enables the
temperature during the cooking
process to be monitored simply and
accurately (see "Roasting - Food
probe").
The FlexiClip runners cannot be
fitted to Shelf level 4 when using the
food probe, as they would cover the
connection socket for the food
probe.
Opener
This opener is used to remove the
cover of the lighting in the sides of the
oven.
32
Features
Miele microfibre cloth
Light soiling and fingerprints can be
easily removed with the microfibre
cloth.
Miele oven cleaner
Miele oven cleaner is suitable for
removing very stubborn soiling. It is not
necessary to pre-heat the oven
beforehand.
33
Features
Oven controls
Cooling fan
In addition to operating the various
cooking functions for baking, roasting
and grilling, the oven controls are also
used to operate
The cooling fan will come on
automatically when a cooking
programme is started. The cooling fan
mixes hot air from the oven cavity with
cool room air before venting it out into
the kitchen through vents located
between the appliance door and the
control panel.
– the time of day display,
– a minute minder,
– a timer to automatically switch
cooking programmes on and off,
– Moisture plus cooking,
– Automatic programmes,
– creating User programmes,
– settings that can be customised.
The cooling fan will continue to run for a
while after a programme to prevent
moisture building up in the oven, on the
control panel or in the oven housing
unit.
When the temperature in the oven has
fallen sufficiently, the cooling fan will
switch off automatically.
Safety features
Vented oven door
System lock 0 for the oven
The oven door glass panes have a
heat-reflecting coating.
The system lock prevents the oven from
being used unintentionally (see
"Settings - System lock 0").
When the oven is operating, air is
passed through the door to keep the
outer pane cool.
The system lock will remain activated
even after an interruption to the power
supply.
The door can be removed and
dismantled for cleaning (see "Cleaning
and care").
Safety switch-off
Door lock - Pyrolytic cleaning
The oven switches itself off
automatically if it is used for an
exceedingly long period. The length of
time depends on the oven function
being used.
For safety reasons the door is locked as
soon as the Pyrolytic cleaning
programme is started. After the
Pyrolytic cleaning programme has
finished, the door will remain locked
until the temperature in the oven has
fallen below 280 °C.
34
Features
PerfectClean treated surfaces
Pyrolytic accessories
PerfectClean surfaces have very good
non-stick properties and are much
easier to keep clean than conventional
enamel surfaces, if cleaned regularly.
The following accessories can be left in
the oven during the Pyrolytic cleaning
programme.
Food can be taken off these surfaces
easily, and soiling from baking and
roasting is simple to remove.
Food can be sliced or cut up on
PerfectClean surfaces.
– Side runners
– FlexiClip telescopic runners
– Rack
See "Cleaning and care" for more
information.
However, do not use ceramic knives
as these will scratch the
PerfectClean surface.
Surfaces treated with PerfectClean
enamel can be cleaned as you would
clean glass.
Read the instructions in "Cleaning and
care" so that the benefits of the
non-stick properties and easy cleaning
are retained.
The following have all been treated with
PerfectClean:
– Universal tray
– Baking tray
– Anti-splash insert
– Perforated baking tray
– Round baking tray
35
Before using for the first time
Basic settings
,The oven must not be operated
until it has been correctly installed in
its housing unit.
Select the country
^ Scroll through the list until the country
you want appears.
^ Touch the illuminated C next to the
country you want to select.
The oven will switch on automatically
when it is connected to the electricity
supply.
^ Select "OK".
Welcome screen
^ Use "+" or "–" to set the year, month
and day.
The greeting "Miele Willkommen" will
appear in the display, and you will then
be requested to select some basic
settings which are needed before the
appliance can be used.
^ Follow the instructions in the display.
Set the language
^ Scroll through the list until the
language you want appears.
^ Touch the illuminated C sensor
next to the language you want to
select.
^ Select "OK".
36
Set the date
^ Select "OK" after selecting each
setting.
Set the time of day
^ Use the numerical keypad to set the
time of day in hours and minutes
(e. g. 1-2-1-5 for 12:15).
^ Select "OK".
The time of day can be displayed in
12 hour format (see "Settings - Time Clock format").
Before using for the first time
Time of day display
^ Select "OK".
You will then be asked when you want
the time of day to show in the display
when the oven is switched off (see
"Settings - Time of day - Display"):
^ Follow and further instructions in the
display.
– On
The time always shows in the
display.
– Off
The display appears dark to save
energy. Some functions are limited.
The oven is ready for use once you
have confirmed the message "Set-up
successfully completed" with "OK".
If you have selected the wrong
language by mistake proceed as
described in "Settings - Language J".
– Night dimming
The time only shows in the display
between 5:00 and 23:00. It switches
off at night to save energy.
^ Select the option you want.
^ Select "OK".
Some information about energy
consumption will appear in the display.
37
Before using for the first time
Heating up the oven for the
^ Select "OK".
first time and rinsing the steam ^ Select "Automatic steam".
injection system
New ovens can give off an unpleasant
smell on first use. Heating up the oven
for at least 1 hour with nothing in it will
get rid of this smell. It is a good idea to
rinse the steam injection system at the
same time.
Ensure that the kitchen is well
ventilated during this operation.
Close doors to other rooms to
prevent the smell spreading
throughout the house.
The prompt to draw in water then
appears.
^ Fill a suitable container with the
required amount of fresh tap water.
^ Open the door.
^ Pull the water intake tube forwards
(located below the control panel on
the left).
^ Remove any stickers or protective foil
from the oven and accessories.
^ Before heating the oven up, wipe the
interior with a damp cloth to remove
any dust or bits of packaging that
may have accumulated in the oven
cavity during storage and unpacking.
^ Fit the FlexiClip runners (available to
order) to the side runners and insert
all trays and the rack.
^ Switch the oven on.
The main menu will appear.
^ Select "Oven functions".
^ Select the Moisture plus d function.
The recommended temperature will
appear (160 °C).
The oven heating, lighting and cooling
fan will switch on.
^ Use the numerical keypad to set the
maximum possible temperature of
250 °C.
38
^ Place the end of the water intake
pipe in the water container.
^ Select "OK".
The water intake process will begin.
Before using for the first time
The amount of water actually drawn up
into the oven may be less than the
amount specified as required, leaving a
small amount in the container.
^ Remove the water container after the
water intake process.
^ Confirm the message telling you that
the process is complete with "OK".
^ Close the door.
The message will then disappear.
You will hear the pump briefly as the
remaining water in the water intake tube
is drawn into the oven.
After a short time a burst of steam is
injected automatically.
,Danger of injury. Steam can
cause injury by scalding. Do not
open the appliance door while a
burst of steam is being injected.
After heating up for the first time
,Danger of burning. Allow the
oven interior to cool down before
cleaning by hand.
^ Switch the oven on.
^ Take all accessories out of the oven
and clean them by hand (see
"Cleaning and care").
^ Clean the oven interior with a clean
sponge and a solution of hot water
and washing-up liquid or a damp
microfibre cloth.
^ Dry all surfaces with a soft cloth.
^ Switch the oven off.
Leave the oven door open until the
oven interior is completely dry.
Heat the empty oven for at least an
hour.
After at least an hour:
^ Switch the oven off.
39
Settings
Settings overview
Settings cannot be altered while a cooking programme is in progress.
Factory default settings are shown in bold in the chart.
Setting
Language J
Options
[...]
...
deutsch
... / Deutschland / Luxemburg / ...
english
... / Australia / United Kingdom / ...
[...]
...
Time (of day)
Display
On / Off / Night dimming
Clock format
24 h / 12 h
Set
Set the time of day
Date
Set the date
Lighting
On
"On" for 15 seconds
Display brightness Darker P P P P G G GM Brighter
Buzzer tones
You can set different buzzer tones, change them or switch
them off.
Melody
Quieter P P P P P P P Louder
Solo tone
Lower O O O O O O O O F F F F F FM Higher
Keypad tone
The volume for the keypad tone can be set, or switched off
altogether.
Quieter P P P P P P P Louder
Units
Weight
g
lb/oz
Temperature
°C
°F
40
Settings
Setting
Cooling fan run-on
Options
Temp. controlled
Time controlled
Pyrolytic (cleaning) With reminder
Without reminder
Recommended
temperatures
Recommended temperatures can be altered within the
range specified.
Safety
System lock
On
Off
Sensor lock
On
Off
Catalyser
You can select the level of odour reduction.
min. P P P P G G GM max.
On / Off
Showroom
programme
Demo mode
Factory default
Settings
On
Off
User programmes
Recommended temperatures
41
Settings
Opening the Settings menu
Language J
^ Select "Settings J" in the main menu.
You can set the language and the
country you want.
A list of settings will appear in the
display.
You can check them or change them.
A tick ( next to an option shows which
setting is active.
Changing and saving settings
^ Select "Settings J".
^ Scroll through the list until the setting
you want appears.
^ Touch the sensor next to the setting.
The setting you want may need to be
selected from a sub menu.
^ Change the setting.
^ Select "OK".
^ Touch # until the main menu
appears or select another setting.
42
After selecting and confirming your
choice, the language you have
selected will appear in the display.
Tip: If you have selected the wrong
language by mistake, you can follow
the flag symbol J, to get back to the
"Language J" menu.
Settings
Time (of day)
Entering settings
Display
Use the numerical keypad to set the
hours and the minutes.
Select how you want the time of day to
show in the display when the oven is
switched off:
– On
The time of day always appears in
the display. You can switch the
lighting on and off or use the minute
minder by touching the relevant
sensor.
– Off
The display is switched off to save
energy. The oven has be to be
switched on before you can use it.
This also applies to using the minute
minder N and the oven lighting I.
– Night dimming
The time only shows in the display
between 5:00 and 23:00. It switches
off at night to save energy.
Clock format
You can select whether the time shows
as a 24 h or 12 h clock.
– 24 h
The time of day is shown in 24 hour
clock format.
If there is a power cut, the current
time of day will reappear once
power has been restored. The time
is stored in memory for about
200 hours.
Date
Use the numerical keypad to set the
date.
Lighting
– On
The interior lighting is switched on
during the entire cooking period.
– "On" for 15 seconds
The oven lighting switches off
15 seconds after a programme
starts.
Touching I switches it on for
another 15 seconds.
– 12 h
The time of day is shown in 12 hour
clock format.
43
Settings
Display brightness
Solo tone
The brightness is represented by a bar
with seven segments.
At the end of a process, a continuous
tone will sound for period of time.
P P P P G G GM
The pitch of this tone is represented by
a segment bar.
^ Select "Darker" or "Brighter" to
change the brightness of the display.
O O O O O O O O F F F F F FM
^ Select "Lower" or "Higher ", to change
the pitch.
Buzzer tones
Melody
At the end of a process, a melody will
sound several times in intervals.
The volume of the melody is
represented by a bar with seven
segments.
P P P P G G GM
Maximum volume is selected when all
segments are filled.
If none of the segments are filled the
melody is switched off.
^ Select "Quieter" or "Louder" to change
the volume.
^ Select "On" or "Off" to switch the
melody on or off.
^ Select "On" or "Off" to switch the Solo
tone on or off.
Keypad tone
An audible tone is heard each time a
sensor is touched.
The volume of the keypad tone is
represented by a bar with seven
segments.
P P P P G G GM
Maximum volume is selected when all
segments are filled.
If none of the segments are filled the
keypad tone is switched off.
^ Select "Quieter" or "Louder" to change
the volume.
^ Select "On" or "Off" to switch the
keypad tone on or off.
44
Settings
Units
Weight
– g
Weight in Automatic programmes is
set using grammes.
– lb/oz
Weight in Automatic programmes is
set using pounds and ounces.
Temperature
– °C
The temperature is displayed in
degrees Celsius.
– °F
The temperature is displayed in
degrees Fahrenheit.
Cooling fan run-on
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or in
the oven housing unit.
– Temp. controlled
The cooling fan switches off when
the temperature in the oven drops
below 70° C.
– Time controlled
The cooling fan switches off after a
period of about 25 minutes.
Do not leave food in the oven to
keep it warm if you have set the
cooling fan to timed controlled
operation.
Moisture levels in the oven could
increase, leading to condensation
forming on the control panel and
surrounding kitchen furniture and
drops of moisture collecting under
the worktop.
Condensate can damage the oven
housing unit, damage the worktop
and lead to corrosion in the oven.
Pyrolytic (cleaning)
– With reminder
A reminder to carry out pyrolytic
cleaning will appear in the display.
– Without reminder
You will not be reminded to carry out
pyrolytic cleaning.
45
Settings
Recommended temperatures
If you cook with different temperatures
a lot it makes sense to change the
recommended temperature.
After selecting this option a list of
functions will appear in the display.
– On
The system lock is now active. If you
want to use the oven touch the
sensor next to "OK" for at least
6 seconds.
The minute minder can still be used
when the system lock is active.
Select the function you want. The
recommended temperature will be
highlighted together with the range
within which it can be changed.
– Off
The system lock is not active. You
can use the oven as normal.
^ Use the numerical keypad to change
the recommended temperature.
Sensor lock
Safety
System lock 0
The system lock prevents the oven
being switched on by mistake.
The system lock will remain activated
even after an interruption to the
power supply.
Select "On" to activate the system lock
The sensor lock prevents the oven
being switched off by accident or
settings being altered whilst food is
cooking.
Once activated, the sensor lock
prevents sensors working after a
programme has been started.
– On
The sensor lock is active.
Touch the sensor next to "OK" for at
least 6 seconds to use the sensors
again.
The sensor lock is then deactivated
for a short period.
– Off
The sensor lock is not active. All
sensors react to touch as normal.
46
Settings
Catalyser
The level of odour reduction is
represented by a bar with seven
segments.
– Off
Touching the sensor next to "OK" for
at least 4 seconds will deactivate
Demo mode. You can then use the
oven as normal.
P G G G G G GM
Maximum odour reduction is selected
when all segments are filled.
If none of the segments are filled the
catalyser is switched off.
^ Select "min." or "max." to change the
level of odour reduction.
^ Select "On" or "Off" to switch the
catalyser on and off.
Showroom programme
This function enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for
domestic use.
Factory default
– Settings
Any settings that you have altered
will be reset to the factory default
setting.
– User programmes
All user programmes will be deleted.
– Recommended temperatures
Recommended temperatures which
have been changed will be reset to
the factory default settings.
Demo mode
– On
Touch the sensor next to "OK" for at
least 4 seconds to activate demo
mode.
If activated, the message "Demo
mode active. The appliance will not
heat up" will appear in the display
when the oven is switched on.
47
Minute minder N
Using the minute minder N
To set the minute minder
The minute minder can be used to time
other activities in the kitchen, e.g.
boiling eggs.
Example: You want to boil some eggs
and set a minute minder time of 6
minutes and 20 seconds.
The minute minder can also be used at
the same time as a cooking programme
in which the start and finish times have
been set, e.g. as a reminder to stir a
dish or add seasoning etc.
If you want to use the minute minder
and "Time – Display – Off" has been
selected, you will need to switch the
oven on before you can set the
minute minder. The minute minder
can then be seen counting down in
the display when the oven is
switched off.
A maximum minute minder time of 9
hours, 59 minutes and 59 seconds can
be set.
Tip: Use the minute minder in Moisture
plus d to remind you to inject the
bursts of steam at the desired time.
^ Touch N.
"0:00:00" will appear (h:min:sec).
^ Use the numerical keypad to enter a
different time (6-2-0).
^ Select "OK".
The minute minder time is now saved.
The time counts down in the display
when the oven is switched off.
If a cooking programme is being run at
the same time the minute minder time
will appear in the bottom of the display.
48
Minute minder N
At the end of the minute minder time
– N will flash,
To change the time set for the minute
minder
– the display will show the time
counting upwards.
^ Touch N or the illuminated sensor
next to the minute minder time which
is counting down.
– a buzzer will sound if the buzzer
volume has been set (see "Settings Buzzer tones").
The minute minder time selected
appears.
^ Touch N.
^ Use the numerical keypad to enter a
different time.
The buzzer will stop and the symbols in
the display will go out.
^ Select "OK".
The changed minute minder is saved
and will count down in seconds.
To cancel the time set for the minute
minder
^ Touch N or the illuminated sensor
next to the minute minder time which
is counting down.
The minute minder time selected
appears.
^ Select "Reset".
The minute minder is now cancelled.
49
Overview of functions
Your oven has a range of oven
functions for preparing food.
Depending on the function selected,
different heating elements are switched
on and sometimes combined with the
fan (see details in brackets).
The following are selected in
the "Oven functions" menu:
Intensive bake O
(Ring heat element + fan + bottom heat
element)
For baking cakes with moist toppings.
Intensive bake is not suitable for baking
thin biscuits or for roasting as the juices
will become too dark.
Auto roast [
Fan plus U
(Ring heat element + fan)
(Ring heat element + fan)
This function is used for baking and
roasting on different levels at the same
time.
A lower temperature can be selected
than when using Conventional heat V,
as the fan distributes the heat to the
food straight away.
This is used for roasting.
The oven heats initially to a high
temperature (230 °C) which seals the
meat to keep it succulent and tasty.
As soon as this temperature has been
reached, the oven temperature
automatically drops back down to the
pre-selected temperature for continued
roasting.
Moisture plus d
Conventional heat V
(Ring heat element + fan + steam
injection system)
(Top heat/grill element + bottom heat
element)
For baking and roasting with moisture
injection.
For baking and roasting traditional
recipes, preparing soufflés and cooking
at low temperatures.
You can use moisture with a different
function.
50
If using an older recipe or cookbook,
set the oven temperature 10 °C lower
than that recommended. This will not
change cooking times.
Overview of functions
Conventional heat W
Fan grill \
(Top heat/grill element)
(Top heat/grill element + fan)
Use this function towards the end of
cooking to brown the top of a cake,
quiche or pizza.
For grilling thicker cuts of meat
(e. g. roulades, chicken). Lower
temperatures can be used than when
using the Grill Y function, as the fan
distributes the heat to the food straight
away.
Bottom heat X
(Bottom heat element)
Use this setting towards the end of
cooking to brown the base of a cake,
quiche or pizza.
Gentle bake
(Ring heat element + fan)
For cooking meat.
Full grill Y
(Top heat/grill element)
For grilling thin cuts (e.g. steaks) in
large quantities and for browning large
baked dishes
The whole of the top heating / grill
element is switched on and glows red
in order to create the heat required.
Economy grill Z
(Top heat/grill element)
For grilling thin cuts (e.g. steaks) in
small quantities and for browning small
baked dishes
Only the inner part of the top heating /
grill element is switched on in order to
create the heat required.
51
Tips on saving energy
Cooking
^ Remove any accessories from the
oven that you do not require for
cooking.
^ Pre-heat the oven only if instructed to
do so in the recipe or the cooking
chart.
^ Avoid opening the door during
cooking.
^ In general, if a range of temperatures
is given, it is best to select the lower
temperature and to check the food
after the shortest given time.
^ It is best to use dark baking tins and
containers with a matt finish made
from non-reflective materials
(enamelled steel, oven-proof
glassware, non-stick coated cast
aluminium). Shiny materials such as
stainless steel or aluminium reflect
heat, preventing it reaching the food
efficiently. Do not cover the oven floor
or the rack with heat-reflective
aluminium foil.
52
^ Observe cooking durations to avoid
energy wastage when cooking food.
Wherever possible set the cooking
duration, or use a food probe.
Make use of the Automatic
programmes if your oven has them.
^ Fan plus U can be used for cooking
many types of food. Because the fan
distributes the heat to food straight
away it allows you to use a lower
temperature than you would with
Conventional heat V. It also enables
you to cook on several shelf levels at
the same time.
^ Fan grill \ can be used for a wide
variety of food. With Fan grill you can
use lower temperatures than with
other grill functions which use the
maximum temperature setting.
^ Whenever possible you should cook
several dishes at the same time.
Place them next to each other in the
oven or on different shelf levels.
^ Dishes which you are unable to
prepare at the same time should, if
possible, be cooked one after the
other in order to make use of existing
heat in the oven.
Tips on saving energy
Using residual heat
^ The temperature in cooking
programmes using temperatures
above 140 °C which take longer than
30 minutes to cook can be turned
down to the lowest possible
temperature about 5 minutes before
the end of cooking in order to make
use of residual heat. The cooling fan
and, depending on cooking function
the hot air fan, will remain on. Do not
switch the oven off (see "Safety
instructions").
^ If you have set a duration for a
cooking programme, the oven
heating elements will switch off
automatically shortly before the end
of cooking and "Energy saving
phase" will appear in the display. The
residual heat in the oven is sufficient
to complete the cooking process.
The cooling fan, and the hot air fan
depending on function will remain
switched on.
^ If you are using the Miele food probe
to cook food, the oven heating
elements will switch off automatically
shortly before the end of cooking.
The residual heat in the oven is
sufficient to complete cooking and
"Energy saving phase" will appear in
the display. The cooling fan, and the
hot air fan depending on function will
remain switched on.
^ If you wish to run the pyrolytic
cleaning programme, it is best to
start it immediately after a cooking
programme. The residual heat in the
oven will help reduce the amount of
energy required to run the
programme.
53
Tips on saving energy
Settings
^ Switch the clock display off if you
wish to reduce energy usage (see
"Settings").
^ Set the oven lighting so that it
switches off automatically during a
programme after 15 seconds. It can
be switched on again at any time by
touching I.
Energy save mode
^ The oven will switch itself off
automatically to save energy if a
programme is not being run and
controls have not been operated.
The time of day will appear in the
display or the display will remain dark
(see "Settings").
54
Operation
Simple operation
After cooking:
^ Switch the oven on.
^ Take the food out of the oven.
The main menu will appear.
^ Switch the oven off.
^ Place the food in the oven.
^ Select "Oven functions".
^ Select the oven function you want.
Function, recommended temperature
and temperature range will appear.
The oven heating, lighting and cooling
fan will switch on.
^ Use the numerical keypad to change
the recommended temperature if
necessary.
The temperature will be automatically
accepted within a few seconds.
If required, select "Change" to go
back to the temperature selection
option (see "Using the oven - further
functions - Changing the
temperature".
Cooling fan
The cooling fan will continue to run for a
while after a cooking process to
prevent moisture building up in the
oven, on the control panel or on the
oven housing unit.
The cooling fan will switch off
automatically when the temperature in
the oven interior has fallen sufficiently.
You can change this default setting if
you wish (see "Settings - Cooling fan
run-on).
^ Select "OK".
The required and the actual
temperature will appear.
You will see the temperature
increasing.
A buzzer will sound when the selected
temperature is first reached. See
"Settings - Buzzer tones".
55
Using the oven - further functions
You have placed the food in the oven,
selected a function and set the
temperature.
^ Select "Change".
Further options will appear in the
display which you can select or change
for your programme:
– Temperature
– Core temperature
(This only appears if you are using
the food probe. You cannot set a
cooking duration when using the
food probe).
– Duration
– Ready at
– Start at
(This will appear after a "Duration" or
"Ready at" time has been set.)
– Heating-up phase
(This only appears if a temperature
of more than 100 °C has been set for
Fan plus U, Auto roast [,
Conventional heat V or Moisture
plus d).
– Type of heating
(This option only appears with
Moisture plus d. You can combine
bursts of steam with another type of
heating).
– Crisp function
(Moisture reduction for making items
crispy on the outside or baking deep
filled fresh fruit cakes).
– Oven functions
(You can change the cooking
function during operation).
56
Changing the function
You can change the cooking function
during operation.
^ Select "Change".
^ Scroll through the list of options until
"Change function" appears.
^ Select "Change function".
^ Select the oven function you want.
The new function will appear in the
display together with its recommended
temperature.
^ If necessary, use the numerical
keypad to set a temperature for the
new function.
^ Select "OK".
The function has been changed.
The times already entered will be kept.
Using the oven - further functions
Changing the temperature
As soon as a cooking function is
selected, a recommended temperature
will appear in the display together with
its possible range.
The following recommended
temperatures are set at the factory:
Fan plus . . . . . . . . . 160 °C (30–250 °C)
Intensive bake . . . . 170 °C (50–250 °C)
Moisture plus . . . . 160 °C (130–250 °C)
Auto roast* . . . . . . 160 °C (100–230 °C)
Conventional heat . 180 °C (30–280 °C)
Top heat . . . . . . . . 190 °C (100–250 °C)
Bottom heat . . . . . 190 °C (100–250 °C)
Full grill . . . . . . . . . 240 °C (200–300 °C)
Economy grill . . . . 240 °C (200–300 °C)
Fan grill. . . . . . . . . 200 °C (100–260 °C)
Gentle bake . . . . . 190 °C (100–250 °C)
* Initial searing phase temperature
approx. 230 °C, continued roasting
temperature 160 °C
^ If the recommended temperature is
suitable for your recipe, select "OK".
Example:
You have selected Fan plus U and
170 °C and can see the temperature
increasing.
You want to reduce the target
temperature to 155 °C.
^ Select "Change".
^ Select "Temperature".
The required temperature is
highlighted.
^ Use the numerical keypad to select
the temperature you want.
^ Select "OK".
The altered required temperature is
saved.
^ Finally, select "OK" if you want to see
the actual temperature increasing in
the display.
The altered required temperature
appears.
^ If it is not suitable for your recipe, you
can change it for this particular
cooking programme.
You can also permanently reset the
recommended temperature to suit
your personal cooking practices. See
"Settings - Recommended
temperatures".
57
Using the oven - further functions
Rapid heat-up
"Heating-up phase" option.
Rapid heat-up can be used to speed
up the heating up phase.
– Rapid
(Factory default setting)
The top and ring heating elements
come on together with the fan to
enable the oven to reach the
required temperature as quickly as
possible.
The Rapid heat-up function switches on
automatically if you set a temperature of
more than 100 °C for Fan plus U, Auto
roast [, Conventional heat V and
Moisture plus d.
Rapid heat-up should be switched
off when cooking pizza and delicate
items (e. g. sponge or biscuits).
These will get brown too quickly on
the top.
You can switch-off "Rapid heat-up" for a
relevant cooking process via the
"Heating-up phase" option.
– Normal
Only the heating elements for the
oven function selected are switched
on (see "Overview of functions").
To switch off the Rapid heat-up
function:
^ Select "Change".
^ Select "Heating-up phase".
^ Select "Normal".
^ Select "OK".
^ Finally, select "OK" if you want to see
the actual temperature increasing in
the display.
"Heating-up" will appear in the display
instead of "Rapid heat-up".
58
Using the oven - further functions
Using the Crisp function
It is only necessary to pre-heat the oven (steam reduction)
Pre-heating the oven
in a few instances.
Most dishes can be placed in a cold
oven. They will then make use of the
heat produced during the heating-up
phase.
Pre-heat the oven when using:
Fan plus U
– dark bread dough,
– beef sirloin joints and fillet.
Conventional heat V
– cakes and biscuits with a short
baking time (up to 30 minutes)
– delicate mixtures (e.g. sponges)
– dark bread dough,
– beef sirloin joints and fillet.
^ Select the required oven function and
the temperature.
^ Rapid heat-up should be switched off
when baking pizza, biscuits and
small cakes.
^ Wait for heating-up to finish.
A buzzer will sound when the set
temperature is reached as long as the
buzzer is set (see "Settings - Buzzer
tones").
It is a good idea to use this function
when cooking items which are moist on
the inside but which should be crispy
on the outside, e.g. frozen chips,
croquettes or pork with crackling.
It is also suitable for deep filled fresh
fruit cakes, such as plum or apple
cake.
You can activate the "Crisp function"
with any function. For best results,
activate it at the beginning of the
cooking process.
You have placed the food in the oven,
selected a function and set the
temperature.
^ Select "Change".
^ Scroll through the list of options until
"Crisp function" appears in the
display.
^ Select "Crisp function".
^ Select "Normal".
^ Select "OK".
Moisture reduction is now activated.
^ Place the food in the oven.
59
Using the oven - further functions
Setting the duration
You have placed the food in the oven,
selected a function and set the
temperature.
You can set the programme to switch
on or on and off automatically by
setting "Duration", "Ready at" or "Start
at".
– Duration
Enter the cooking duration you
require.
Once the duration set has elapsed,
the heating will switch off
automatically.
The maximum duration which can be
set is 12:00 hours.
A cooking duration cannot be
entered if you are using the food
probe. When using the food probe,
the cooking duration is determined
by when the set core temperature is
reached.
– Ready at
Set the time you want cooking to
finish at. The oven will switch off
automatically at the time you have
set.
A "Ready at" time cannot be entered
if you are using the food probe.
When using the food probe, the end
of the cooking duration is determined
by when the set core temperature is
reached.
60
– Start at
Set the time you want cooking to
start at. The oven will switch on
automatically at the time you have
set.
"Start at" can only be used together
with "Duration" or "Ready at".
(Exception: when using the food
probe).
Using the oven - further functions
Switching off automatically
Example:
It is 11:45. Your food needs 30 minutes
to cook and should be ready at 12:15.
Select "Duration" and set the time to
00:30 h or select "Ready at" and set the
time to 12:15.
The oven will switch off automatically
after this duration has elapsed or the
time set has been reached.
Set the "Duration"
Switching on and off automatically
We recommend using automatic
switching on and off when roasting.
For baking do not delay the start for
too long as the cake mixture or
dough will dry out, and the raising
agents will lose their effectiveness.
To switch a cooking programme on
and off automatically you have a
choice of how to enter the time
parameters:
^ Select "Change".
– "Duration" and "Ready at"
^ Select "Duration".
– "Duration" and "Start at"
^ Use the numerical keypad to set the
duration (3-0).
– "Ready at" and "Start at"
^ Select "OK".
Example:
It is 11:30. Your food needs 30 minutes
to cook and should be ready at 12:30.
Set "Ready at"
^ Select "Change".
^ Select "Change".
^ Select "Duration" and set a time of
00:30 h.
^ Select "Ready at".
^ Use the numerical keypad to set the
time when food should be ready at
(1-2-1-5).
^ Select "OK".
^ Select "Ready at" and set the time to
12:30 h.
The "Start at" time will be calculated
automatically. "Start at 12:00" will
appear in the display.
The oven will switch on automatically
when this time is reached.
61
Using the oven - further functions
Sequence of a programme that
switches on and off automatically
Up until the start time the function, the
selected temperature, "Start at" and the
start time will appear in the display.
After the programme has started you
can follow the heating-up phase in the
display until the required temperature
has been reached.
Once this temperature is reached a
buzzer will sound, if this option has
been switched on (see "Settings Buzzer tones").
After the heating-up phase the time
remaining will appear in the display.
You can follow the time counting down
in the display. The last minute counts
down in seconds.
At the end of the programme a buzzer
will sound, if this option has been
switched on (see "Settings - Buzzer
tones").
The oven heating and lighting will
switch off. "Process finished" will
appear in the display.
You have the option of saving the
programme as a User programme (see
"User programmes") or increasing the
duration of the programme via
"Change". Touch # to go to the main
menu.
During the cooling down phase the
cooling fan will continue to run for a
while.
62
Changing the set time
^ Select "Change".
All options that can be changed will
appear.
^ Select the time you want.
^ Use the numerical keypad to set the
time.
^ Select "OK".
These settings will all be deleted in
the event of a power cut.
Cancelling cooking
^ Touch #.
^ When "Cancel cooking?" appears in
the display, select "Yes".
The oven heating and lighting will
switch off, and any set durations will be
deleted.
Moisture plus d
Your oven is equipped with a steam
injection system for cooking with
moisture. Baking, roasting and cooking
with Moisture plus d guarantees
optimised steam and air conduction for
excellent cooking and browning results.
After selecting Moisture plus d you
need to set the temperature and the
number of bursts of steam.
You can select:
– Automatic burst of steam
This requires enough water for one
burst of steam. The burst of steam
will be injected into the oven
automatically after the heating-up
phase.
– 1 burst of steam
2 bursts of steam
3 bursts of steam
You need to add the appropriate
amount of water for the number of
bursts of steam.
You have to release the bursts of
steam yourself.
Fresh tap water is taken into the steam
system via the tube underneath the
control panel on the left.
,Use only fresh tap water when
cooking with the Moisture plus
function. Other liquids will cause
damage to the oven.
The water is then injected as bursts of
steam into the oven compartment
during the cooking programme.
The steam inlets are located at the rear
left corner of the roof of the oven.
One burst of steam takes about
5-8 minutes.
The number of bursts of steam and
when they are injected will depend on
the type of food being cooked:
– Yeast mixtures will rise better if
steam is injected at the beginning of
the programme.
– Bread and rolls also rise better if
exposed to steam at the start.
Injecting a burst of steam at the end
of the programme will give the bread
and rolls a glistening crust.
– When roasting meat with a high fat
content injecting steam at the
beginning of roasting will help render
the fat.
Additional moisture is not suitable for
mixtures which already contain a lot of
moisture, such as choux pastry and
meringues, as the addition of steam
does not allow them to dry out
sufficiently.
63
Moisture plus d
Moisture plus function d
It is quite normal for condensation to
form on the inside of the door during
steam injection. This will dissipate
during the course of the cooking
programme.
Setting the temperature
^ Use the numerical keypad to select
the temperature you want.
^ Select "OK".
Set the number of bursts of steam
^ Prepare the food and place in the
oven.
Tip: Please refer to the sample
recipes.
^ Select "Oven functions".
If you wish the burst of steam to be
injected into the oven automatically
after the heating-up phase:
^ Select the Moisture plus d function.
The recommended temperature of
160 °C will appear.
The oven heating, lighting and cooling
fan will switch on.
64
^ Select "Automatic steam".
If you wish to inject one or more bursts
of steam manually at specific times:
^ Select "1 burst of steam", "2 bursts of
steam" or "3 bursts of steam".
Moisture plus d
When to add the steam
This option will only appear in the
display after you have selected 1, 2
or 3 bursts of steam.
Tip: If you have selected more than one
burst of steam, the 2nd one should be
released at least 10 minutes after
starting the programme.
Preparing and starting the water
intake process
^ Fill a suitable container with the
required amount of fresh tap water.
^ Open the door.
^ Pull the water intake pipe forwards
(located below the control panel on
the left).
– Manual steam
If you want to inject the bursts of steam
manually:
^ Select "Manual steam".
Then set the minute minder N to
remind you when to release them.
– Time-controlled steam
If you want to time when to release the
bursts of steam:
^ Select "Time-controlled steam".
^ Use the numerical keypad to set the
time for each burst of steam.
The oven will then release the steam
at the specified times. The time
counts down as soon as the
programme is started.
^ Select "OK".
The prompt to draw in water then
appears.
^ Immerse the end of the water intake
pipe in the container with tap water.
^ Select "OK".
The water intake process will begin.
The amount of water actually drawn up
into the oven may be less than the
amount specified as required, leaving a
small amount in the container.
The intake process can be
interrupted and restarted at any time
by selecting "Stop" or "Start".
65
Moisture plus d
^ Remove the water container after the
water intake process.
^ Confirm the message telling you that
the process is complete with "OK".
^ Close the door.
You will hear the pump briefly as the
remaining water in the water intake pipe
is drawn into the oven.
The oven heating and the cooling fan
will switch on. The required and actual
temperatures will appear in the display.
You will see the temperature
increasing.
A buzzer will sound when the selected
temperature is first reached. See
"Settings - Buzzer tones".
If you have selected "Time-controlled
steam", after the heating-up phase,
the time at which to release the next
burst of steam will appear in the
display. If necessary, you can alter
this time via the "Change" option.
66
Changing the type of heating
The Moisture plus programme d uses
"Fan heat" together with the addition of
moisture.
You can use moisture with one of the
following other types of heating:
– Conventional heat
– Intensive bake
– Auto Roast
^ Select "Change".
^ Scroll through the list of options until
"Type of heating" is highlighted.
^ Select the function you want.
^ Select "OK".
Cooking will be carried out using the
different type of heating selected.
Moisture plus d
Steam can cause injury by scalding.
Do not open the door while the burst of steam is being injected.
Condensation on the sensors will make them react more slowly.
Automatic burst of steam
1, 2 or 3 bursts of steam
Once the heating-up phase has been
completed, the automatic burst of
steam is injected.
– Manual steam
The water will vaporise in the oven
whilst steam is being released.
After the burst of steam, * will go out .
^ Continue cooking until the end of the
cooking duration.
If you have selected "Manual steam",
you can release the steam as soon as
the * sensor is lit up.
Please wait until the heating-up
phase is completed to allow the
steam to be distributed evenly by
the warm air in the oven.
Please refer to the recipes for the timing
of the bursts of steam.
Tip: Set the minute minder N to
remind you.
^ Touch *.
The burst of steam will be released, the
sensor light will go out and * will
appear in the display.
^ Proceed as described to inject
further bursts of steam.
* will go out in the display after each
burst of steam.
^ Continue cooking until the end of the
cooking duration.
– Time-controlled steam
The oven will release the steam after
the specified amount of time.
67
Moisture plus d
Residual water evaporation
When cooking using the addition of
moisture, the water will be equally
distributed between the number of
bursts of steam and used up as long as
the programme is not interrupted.
However, if a programme using the
addition of moisture is interrupted
before all the bursts of steam have
been injected, the water for these
unused bursts of steam will remain in
the system.
The next time Moisture plus d or an
Automatic programme with moisture is
used "Evaporate residual moisture?" will
appear in the display with the options
"Skip" and "Yes".
It is best to start the evaporation of
residual water straight away so that
only fresh water is used during a
cooking programme.
68
To start residual water evaporation
immediately
Steam can cause scalding injuries.
Do not open the door during the
evaporation process.
^ Select the Moisture plus d function
or an Automatic programme that
uses moisture.
"Evaporate residual moisture?" will
appear.
^ Select "Yes".
"Evaporate res. water" and a time will
appear in the display.
The evaporation process will begin. The
duration will count down in the display.
The duration displayed depends on the
amount of water in the system. During
the evaporation process, this duration
may change depending on how much
water is present.
Moisture plus d
At the end of the residual water
evaporation process "Process finished"
appears in the display.
^ Touch #.
A cooking process using the Moisture
plus function d or an Automatic
programme with moisture can now be
carried out.
The moisture will condense on the
door and the oven cavity and needs
to be wiped off after the oven has
cooled down.
To skip residual moisture
evaporation
,Do not cancel the prompt for
residual moisture evaporation
unless you have to, as this could, in
certain circumstances, cause the
steam unit to overflow into the oven
interior when taking in more water.
^ Select the Moisture plus d function
or an Automatic programme that
uses moisture.
"Evaporate residual moisture?" will
appear.
^ Select "Skip".
A cooking process using the Moisture
plus function d or an Automatic
programme with moisture can now be
carried out.
You will be prompted to carry out the
evaporation of the residual moisture
process the next time you select the
Moisture plus d function or an Automatic programme that uses moisture
and when you switch the oven off.
69
Automatic programmes
Your oven has a wide range of
Automatic programmes to enable you
to achieve excellent results with
ease. Simply select the appropriate
programme for the type of food you
are cooking and follow the
instructions in the display.
Select Automatic programmes from the
"Automatic programmes" menu.
List of food types
– Cakes
– Cookies / Muffins
– Pizza, Quiche & Co
– Meat
– Game
– Poultry
– Fish
– Bakes & Gratins
To use an Automatic
programme
^ Select "Automatic programmes".
A list of food types will appear in the
display.
^ Select the food type you want.
The Automatic programmes available
will then appear.
^ Select the Automatic programme that
you want.
Each step you need to take before
starting the Automatic programme will
appear in the display.
Depending on the programme you
have selected, further information or
prompts will appear regarding
– the roasting or baking dish,
– the shelf level,
– using the food probe,
– Frozen food
– the amount of water required for
programmes with Moisture plus,
– Dessert
– the cooking duration.
^ Follow the instructions in the display.
See the recipe booklet for a
selection of Automatic programmes
to try.
70
Automatic programmes
Notes on using these programmes
– When using the Automatic
programmes the recipes provided
are designed as a guide only.
You can use them for other similar
recipes, including those using
different quantities.
– The oven interior needs to be at
room temperature before starting an
Automatic programme.
– The duration quoted for Automatic
programmes is an estimate. It may
increase or decrease depending on
the programme. When using the food
probe the duration will be
determined by when the core
temperature is reached. The
duration, in particular with meat, will
vary depending on the initial
temperature of the food.
– Some programmes require the
addition of liquid or vegetables
during cooking. You will be
prompted by a message in the
display when this needs to be done
(e.g. "Add liquid at ...").
– Some programmes require a
pre-heating phase before food is
placed in the oven. A prompt will
appear to tell you when to add the
food.
71
User programmes
You can create and save up to 20 of
your own programmes.
– Each one can have up to 10 cooking
stages. This enables you to save
your most frequently used recipes
very accurately. Each stage contains
a function, temperature and duration
or core temperature.
To create a User programme
^ Select "User programmes".
To create the first User programme:
The first time you create a User
programme "Create programme" will
appear in the display.
^ Select "OK".
– You can specify the shelf level(s) for
the food.
To create further User programmes:
– You can enter the name of the
programme for your recipe.
If User programmes already exist, the
programme names will appear with
"Edit programmes" underneath them.
When you next select the programme it
will start automatically.
^ Select "Edit programmes".
There are different ways of creating a
User programme:
– Select "Save" at the end of running
an Automatic programme.
– Select "Save" after running a
programme with a set duration.
Then name the programme.
^ Select "Create programmes".
You can now specify the settings for
cooking stage 1.
Follow instructions in the display:
^ Select the oven function you want.
^ Set the required temperature and
select "OK".
^ Set the required cooking duration.
With some functions you can set the
core temperature instead of the
duration.
^ Select "OK".
Settings for the 1st cooking stage have
now been set.
72
User programmes
You can add more cooking stages, for
example, if you want to add another
cooking function to follow on from the
first.
If further cooking stages are required:
^ Select "Add cooking stage" and
proceed as for the 1st cooking stage.
When you have finished setting the
cooking stages:
^ Select "Finish programme".
Finally set the shelf level(s) to be used.
^ Select and confirm the required
level(s).
A summary or your settings will appear
in the display.
^ Check the settings and then select
"Accept".
Select "Change" if you want to
change your programme. You can
change individual cooking stages or
add more cooking stages.
You can now save or change your User
programme. You can also start it immediately or programme it to switch on or
off automatically at a specific time.
^ Select "Save".
Finally give the programme a name.
The following symbols appear next to
the alphabet:
Symbol Explanation
ABC
Alphabet in upper case
abc
Alphabet in lower case
ƒ
123
Space
Numerals 0 to 9 and hyphen
^ Touch the sensors next to the
symbols to highlight the character
you want.
^ Select "Select".
The letter or number you have selected
will appear in the top line of the display.
Any wrongly entered characters can
be deleted one after the other by
selecting "Delete" or #.
A name can have a maximum of 10
characters.
^ Select the rest of the letters or
numbers for your programme name.
^ Once you have entered the
programme name, select "Save".
A message will appear in the display
confirming that the name has been
saved.
^ Select "OK".
73
User programmes
To start a User programme
^ Select the option you want.
^ Place the food in the oven.
^ Confirm the message regarding
which shelf level to use with "OK".
^ Select "User programmes".
The programme names will appear in
the display with "Edit programmes"
underneath.
^ Select the programme you want.
A list will appear in the display.
– Start now
The programme will start straight
away and the oven heating will
switch on.
– Start later
This option only appears if you are
using the food probe. You can
specify when you want the
programme to start. The oven
heating will switch on automatically
at the time you set.
– Start at
You can specify when you want the
programme to start. The oven
heating will switch on automatically
at the time you set.
– Ready at
You can specify when you want
cooking to finish. The oven heating
will switch off automatically at the
time you set.
The option to "Change cooking
stages" is described in "To change
User programmes".
74
The programme will start according to
the specified start or finish time.
To change User programmes
Change cooking stages
Cooking stages in an Automatic
programme that you have renamed
as a User programme cannot be
changed.
^ Select "User programmes".
The programme names will appear in
the display with "Edit programmes"
underneath.
^ Select the programme you want.
^ Select "Change cooking stages".
You can change the specified settings
for a cooking stage or add more
cooking stages to the programme.
^ Select the cooking stage you want to
change or "Add cooking stage".
^ Change the programme as you wish
(see "To create a User programme").
User programmes
^ Check the settings and then select
"Accept".
^ Select "Save".
^ Change the name if necessary (see
"To create a User programme") and
select "Save".
The changes to your programme will be
saved.
To delete User programmes
^ Select "User programmes".
The programme names will appear in
the display with "Edit programmes"
underneath.
^ Select "Edit programmes".
^ Select "Delete programme".
^ Select the programme you want.
Change name
^ Select "User programmes".
The programme names will appear in
the display with "Edit programmes"
underneath.
^ Select "Edit programmes".
^ Select "Change programme".
^ Confirm the question as to whether
the programme should be deleted
with "Yes".
The programme will be deleted.
You can delete all User programmes
at once (see "Settings - Factory
default - User programmes").
^ Select the programme you want.
^ Select "Change name".
^ Enter a new name (see "To create a
User programme").
^ After entering the new name, select
"Save".
A message will appear in the display
confirming that the name has been
saved.
^ Select "OK".
The new name for your programme has
been saved.
75
Baking
Eating food which has been cooked
correctly is important for good
health.
Only bake cakes, pizza, chips etc.
until they are golden. Do not
overcook them.
Functions
Depending on how the food is
prepared, you can use Fan plus U,
Intensive bake O, Moisture plus d
or Conventional heat V.
Bakeware
The choice of bakeware depends on
the oven function.
– Fan plus U, Intensive bake O,
Moisture plus d:
Baking tray, universal tray, bakeware
of any ovenproof material.
– Conventional heat V:
Dark baking tins with a matt finish.
Avoid using bright, shiny metal tins
as they give an uneven and poor
browning result and in some cases
cakes might not cook properly.
76
– Always place baking tins on the rack.
Position rectangular tins with the
longer side across the width of the
rack for optimum heat distribution
and even baking results.
– When baking cakes with fresh fruit
toppings and deep sponge cakes
place the tin in the universal tray to
catch any spillages.
Baking paper, greasing the tin
Miele accessories, e. g. the universal
tray are treated with PerfectClean
enamel (see "Features").
Surfaces treated with PerfectClean
enamel generally do not need to be
greased or covered with baking paper.
Baking paper is only needed with
– anything with a high salt content
(e.g. pretzels, bread sticks), because
sodium can damage the
PerfectClean surface,
– meringues or sponges with a high
egg-white content, because they are
more likely to stick,
– frozen food cooked on the rack.
Baking
Notes on the baking chart
Shelf levels ‡
Temperature 6
The shelf level on which you place your
food for baking depends on the oven
function and number of trays being
used.
As a general rule, select the lower
temperature given in the chart.
Baking at temperatures higher than
those recommended may reduce the
cooking time, but will lead to uneven
browning, and unsatisfactory cooking
results.
Baking duration +
Check if the food is cooked at the end
of the shortest time quoted.
To check if a cake is ready, insert a
wooden skewer into the centre. It is
ready if the skewer comes out clean,
without dough or crumbs sticking to it.
– Fan plus U
1 tray: level 2
2 trays: level 1+3 / 2+4
3 trays: level 1+3+5
When using the universal tray and
baking tray to bake on two or more
levels at the same time, place the
universal tray underneath the baking
tray.
Bake moist biscuits and cakes on a
maximum of two levels at the same
time.
– Moisture plus d
1 tray: level 2
– Intensive bake O
1 tray: level 1 or 2
– Conventional heat V
1 tray: level 1 or 2
77
Baking
Baking chart
Cakes / biscuits
6
U
‡
+
[°C]
Creamed mixture
Sponge cake
Ring cake
Muffins (1 [2] tray(s))
Small cakes (1 tray) 1) 2)
Small cakes (2 trays) 1) 2)
Foam cake (tray)
Marble, nut cake (tin)
Fresh fruit cake, with meringue topping (tray)
Fresh fruit cake (tray)
Fresh fruit cake (tin)
Flan base 1)
Small cakes/biscuits 1) (1 [2] tray(s))
Rubbed in mixture
Flan base
Streusel cake
Small cakes/biscuits 1) (1 [2] tray(s))
Drop cookies 1) 2) (1 [2] tray/s)
Cheese cake
Apple pie (tin C 20 cm) 1) 2)
Apple pie 1)
Apricot tart with topping (tin)
Swiss apple cake
[min]
150–170
150–170
150–170
150
150 3)
150–170
150–170
150–170
150–170
150–170
150–170
150–170
2
2
2 [1+3 4)]
2
2+4
2
2
2
2
2
2
2 [1+3 4)]
60–70
65–80
30–50
25–40
25–40
25–40
60–80
45–50
35–55
55–65
25–35
20–25
150–170
150–170
150–170
140
150–170
160
160–180
150–170
–
2
2
2 [1+3 4)]
2 [1+3 4)]
2
2
2
2
–
20–25
45–55
15–25
30–45
70–95
85–105
50–70
55–75
–
The data for the recommended function is printed in bold.
Unless otherwise stated, the times given are for an oven which has not been
pre-heated. With a pre-heated oven, shorten times by up to 10 minutes.
In general, if a range of temperatures is given, it is best to select the lower
temperature and to check the food after the shortest time.
78
Baking
6
V
‡
[°C]
+
6
[min]
[°C]
O
‡
+
[min]
150–170
150–170
160–180
160 3)
–
170–190
150–170
170–190
170–190
160–180
170–190
160–180 3)
2
2
2
3
–
2
2
2
1
2
2
3
60–70
65–80
25–45
25–35
–
25–40
60–80
45–50
35–55
55–65
20–25
15–25
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
170–190 3)
170–190
160–180 3)
160 3)
170–190
180
170–190
170–190
220–240 3) 5)
2
2
3
2
2
1
1
2
1
15–20
45–55
15–25
15–33
85–95
80–95
45–65
55–75
35–50
–
–
–
–
150–170
–
160–180
150–170
190–210 3)
–
–
–
–
2
–
1
2
1
–
–
–
–
75–90
–
50–70
50–60
25–40
U Fan plus / V Conventional heat / O Intensive bake
6 Temperature / ‡ Shelf level / + Duration
1) Switch "Rapid heat-up" off during the heating-up phase. To do this select "Change –
Heating-up phase – Normal".
2) The settings also apply for testing in accordance with EN 60350.
3) Pre-heat the oven.
4) Take the baking trays out of the oven early if the food is sufficiently browned before the
specified duration has elapsed.
5) Select "Change – Crisp function – On".
79
Baking
Baking chart
U
Cakes / biscuits
6
‡
+
[°C]
[min]
Sponge mix1)
Tart / flan base (2 eggs) 1)
170–190
2
15–20
Sponge cake (4 to 6 eggs) 1)
175–195
2
22–30
Whisked sponge cake
1) 2)
180
2
25–35
160–180
2
15–25
50
5)
15–30
Gugelhupf
150–170
2
50–60
Stollen
150–170
2
55–65
Streusel cake
150–170
2
35–45
Fresh fruit cake (tray)
160–180
2
40–60
White bread
160–180
2
50–60
2
50–60
2
35–45
Swiss roll 1)
Yeast mixtures and quark dough
Proving dough
Wholegrain bread
Pizza (tray) 1)
170–190
3)
170–190
Onion tart
170–190
2
35–45
Apple turnovers (1 [2] tray(s))
150–170
2 [1+3 4)]
25–30
Choux pasty 1), Eclairs (1 [2] tray(s))
160–180
2 [1+3 4)]
30–45
Puff pastry (1 [2] tray(s))
170–190
2 [1+3 4)]
20–25
Meringues, Macaroons (1 [2] tray(s))
120–140
4)
2 [1+3 ]
25–50
The data for the recommended function is printed in bold.
Unless otherwise stated, the times given are for an oven which has not been
pre-heated. With a pre-heated oven, shorten times by up to 10 minutes.
In general, if a range of temperatures is given, it is best to select the lower
temperature and to check the food after the shortest time.
80
Baking
V
6
‡
[°C]
O
+
6
[min]
[°C]
‡
+
[min]
170–190 3)
2
10–20
–
–
–
170–190 3)
2
20–40
–
–
–
3)
2
20–45
–
–
–
170–190 3)
2
15–20
–
–
–
35
5)
15–30
–
–
160–180
1
50–60
–
–
150–170
2
55–65
–
–
170–190
2
35–45
–
–
3
40–55
170–190
2
40–55
2
50–60
–
–
–
150–180
170–190
1) 6)
160–180
3)
2
50–60
–
–
–
190–210 6)
2
30–45
170–190
2
40–50
180–200 6)
2
25–35
170–190
2
25–35
160–180
2
25–30
–
–
–
3)
3
30–40
–
–
–
190–210 3)
2
20–25
–
–
–
3)
2
25–50
–
–
–
190–210
180–200
120–140
U Fan plus / V Conventional heat / O Intensive bake
6 Temperature / ‡ Shelf level / + Duration
1) Switch "Rapid heat-up" off during the heating-up phase. To do this select "Change –
Heating-up phase – Normal".
2) The settings also apply for testing in accordance with EN 60350.
3) Pre-heat the oven.
4) Take the baking trays out of the oven early if the food is sufficiently browned before the
specified duration has elapsed.
5) Place the rack on the floor of the oven, and stand the bowl containing the dough on the
rack.
6) Select "Change – Crisp function – On".
81
Roasting
Functions
Notes on the roasting chart
Depending on how the food is being
cooked, you can use Fan plus U,
Moisture plus d, Auto roast [,
Conventional heat V or an Automatic
programme.
Temperature 6
Roasting dishes
You can use any heat-resistant dishes:
Miele Gourmet oven dishes, roasting
pans, ovenproof glass dishes, roasting
bags, dishes made from earthenware
or cast iron, the universal tray, rack
and/or anti-splash insert (if available)
on top of the universal tray.
We recommend roasting in oven dishes
as this ensures that sufficient stock
remains for making gravy. The oven
also stays cleaner than when roasting
on the rack.
As a general rule, select the lower
temperature given in the chart. If higher
temperatures are used, the meat will
brown on the outside, but will not be
properly cooked through.
When cooking with Fan plus U,
Moisture plus d or Auto roast [
select a temperature approx. 20 °C
lower than for Conventional heat V.
For cuts which weigh more than 3 kg,
select a temperature approx. 10 °C
lower than that given in the roasting
chart. Roasting will take longer at the
lower temperature, but will be more
even.
When roasting on the rack, set a
temperature approx. 10 °C lower than
for roasting in an oven dish.
Pre-heating
Pre-heating is required when roasting
beef sirloin joints and fillet.
82
Roasting
Roasting duration +
The traditional British method for
calculating the roasting time is to allow
15 to 20 minutes per lb/450 grammes,
according to type of meat, plus approx.
20 minutes, adjusting the length of time
as roasting proceeds to obtain the
required result. The roasting time can
also be determined by multiplying the
thickness of the roast [cm] with the time
per cm [min/cm], depending on the
type of meat:
Beef/venison: . . . . . . . . . 15–18 min/cm
Pork/veal/lamb: . . . . . . . . 12–15 min/cm
Tips
Browning
Browning only occurs towards the end
of the roasting time. Remove the lid
about halfway through the roasting time
if a more intensive browning result is
desired.
Standing time
At the end of the programme, take the
roast out of the oven, wrap in aluminium
foil and leave to stand for about
10 minutes. This helps retain juices
when the meat is carved.
Sirloin/fillet: . . . . . . . . . . . . 8–10 min/cm
Check if the meat is cooked after the
shortest duration quoted.
Shelf levels ‡
Roasting poultry
For a crisp finish, baste the poultry
10 minutes before the end of the
cooking time with slightly salted water.
As a general rule, use shelf level 2.
83
Roasting
Food probe
The food probe enables the roasting
process to be monitored simply and
reliably.
How the food probe works
The metal tip of the food probe is
inserted into the food. There is a
temperature sensor in the metal tip
which measures the core temperature
of the food during cooking. The rise in
the core temperature reflects the extent
to which the food is cooked. You can
programme the core temperature to be
lower or higher, depending on whether
you want your meat to be rare, medium
or well done.
A core temperature of up to 99 °C can
be set. Please refer to the Roasting
chart and "Low temperature cooking"
for the core temperatures applicable for
different types of meat.
The duration for roasting meat by
temperature using the probe is similar
to the duration when cooking by time.
84
Roasting
When to use it
Some Automatic programmes and
Special applications will prompt you to
use the food probe.
You can also use it with your own User
programmes and with the following
functions:
– Auto roast [
– Fan plus U
– Intensive bake O
– Conventional heat V
– Moisture plus d
– Fan grill \
Important notes about using
the food probe
Please note:
– You can place the meat in a pot or
on the rack in the universal tray.
– The metal tip of the food probe must
be fully inserted into the centre of the
food.
– When cooking poultry, insert the
metal tip into the thickest part of the
breast. You can find the thickest part
of the breast by pressing the area
with your thumb and index finger.
– Do not let the metal tip touch any
bones or insert it into a particularly
fatty area of the meat. If fat or bone
come into contact with the probe,
this can lead to the oven being
switched off too early.
– If the meat is very heavily marbled
with fat, select the highest core
temperature given in the Roasting
chart.
– When using roasting bags or
aluminium foil, insert the probe
through the bag or foil into the centre
of the meat. You can also place the
meat, with the food probe inserted,
inside the foil. Follow the roasting
bag / aluminium foil manufacturer's
instructions.
85
Roasting
Using the food probe
^ Insert the metal tip of the food probe
fully into the food.
^ Place the food in the oven.
You can also delay the start of the
cooking programme to a later time.
Select the "Start at" option.
You can estimate approximately when
the food will be ready as the duration of
the cooking programme is about the
same as if you were cooking food
without using the food probe.
You cannot enter a "Duration" or "Ready
at" time, as the total cooking duration is
determined by how long it takes for the
core temperature to be reached.
^ Insert the plug of the food probe into
the socket until you feel it engage.
^ Close the door.
^ Select the oven function or Automatic
programme.
^ If necessary, use the numerical
keypad to set the temperature.
^ If necessary use the numerical
keypad to set the core temperature.
The core temperatures cannot be
changed for the Automatic
programmes.
86
Roasting
Time left display
Using residual heat
After a certain time, the estimated
duration of the cooking process
remaining (time left) will appear in the
display.
The heating in the oven switches off
shortly before the end of the cooking
programme. The residual heat in the
oven is sufficient to complete the
cooking process.
The time remaining is calculated from
the cooking temperature selected, the
required core temperature and the
pattern of the increasing core
temperature.
The time remaining first shown is an
estimate. As the cooking process
continues the time remaining is revised
continuously, and a more accurate
revised figure shown.
Altering the cooking or core
temperature or selecting a different
function will delete the time left
information.
The time remaining will be recalculated
if the door is kept open for a long
period of time.
Switching between the time
remaining and the core temperature
displays
You can switch between the time
remaining and core temperature
display as soon as the time remaining
first appears in the display.
Using the residual heat in the oven
saves energy.
"Energy save phase" will appear in the
display to show that the oven is in
energy save mode. The measured core
temperature is no longer visible.
The cooling fan continues to run, as
does the hot air fan if a "fan" setting has
been chosen.
When the core temperature selected
has been reached,
– "Process finished" will appear in the
display,
– a buzzer will sound if the buzzer
volume has been set (see "Settings Buzzer tones").
If the food is not yet cooked
sufficiently, insert the food probe into
another place and repeat the
programme.
^ Select "Change".
^ Select "Status".
^ Select whether you want the time
remaining or the core temperature to
show in the display and confirm your
selection with "OK".
87
Roasting
Roasting chart
U/[
Meat/Fish
6
+
[°C]
[min]
Topside of beef, approx. 1 kg
170–190
Beef fillet or sirloin joint, approx. 1 kg
200–220
Venison, approx. 1 kg
140–160
Pork joint, approx.1 kg
160–180
Pork joint with crackling, approx. 2 kg
160–180
Gammon joint, approx. 1 kg
150–170
Meat loaf, approx. 1 kg
160–180
Veal, approx. 1.5 kg
180–200
Leg of lamb, approx. 1.5 kg
170–190
Saddle of lamb, approx. 1.5 kg
170–190
Poultry, 0.8–1 kg
180–200
Poultry, approx. 2 kg
170–190
Poultry, stuffed, approx. 2 kg
170–190
Poultry, approx. 4 kg
160–180
Fish, whole, approx. 1.5 kg
160–180
The data for the recommended function is printed in bold.
100–130 2)
45–55 3)
100–120 4)
100–120 4)
130–160 4)
60–80 4)
60–70 4)
80–100 4)
90–120 4)
50–60 3)
60–70
100–120
110–130
150–180
35–55
The times given are for an oven which has not been pre-heated.
In general, if a range of temperatures is given, it is best to select the lower
temperature and to check the food after the shortest time.
The temperatures quoted are for roasting in an open dish.
Lower the temperature by approx. 10 °C if roasting directly on the universal tray or
on the rack with the universal tray underneath.
88
Roasting
d 1)
V
6
+
6
+
[°C]
[min]
[°C]
[min]
–
–
140–160
160–180
170–190
160–180
170–190
170–190
170–190
–
190–210
180–200
180–200
170–190
170–190
–
–
100–120 4)
110–130 4)
130–160 4)
60–80 4)
60–70 4)
90–110 4)
90–120 4)
–
60–70
90–110
100–120
140–170
35–55
190–210
200–220
150–170
180–200
190–210
170–190
190–210
190–210
200–220
190–210
190–210
190–210
190–210
180–200
190–210
Q
6)
[°C]
2)
110–140
45–55 3)
100–120 4)
100–120 4)
130–160 4)
80–100 4)
60–70 4)
100–120 4)
90–120 4)
50–60
60–75 5)
90–110 5)
110–130 5)
150–180
35–55
85–95
40–70 7)
80–90
80–90
80–90
75–80
75–80
70–80
80–85
70–75
85–90
85–95
85–95
85–90
75–80
U Fan plus / [ Auto roast / d Moisture plus / V Conventional heat
6 Temperature/ + Roasting duration / Q Core temperature for the food probe
As a general rule, use shelf level 2.
1) After the heating-up phase, inject the bursts of steam at intervals throughout the cooking
duration.
2) Roast with the lid on first, then remove the lid halfway through roasting and add approx.
½ litre liquid.
3) Pre-heat the oven. However, switch "Rapid heat-up" off. To do this, select "Change –
Heat-up phase – Normal".
4) Add approx. ½ litre liquid halfway through roasting.
5) Use level 3.
6) When using the food probe, enter an appropriate core temperature for the food being
cooked.
7) Select a core temperature which is appropriate for how well done you want the food to
be cooked:
rare: 40–45 °C, medium: 50–60 °C, well done: 60–70 °C
89
Low temperature cooking
This method is ideal for cooking beef,
pork, veal or lamb when a tender result
is required.
First sear the meat all over at a high
temperature on the hob in order to seal
it.
Then place the meat in the pre-heated
oven where the low temperature and
long cooking time will cook it to
perfection and ensure it is very tender.
The meat relaxes and the juices inside
start to circulate evenly throughout the
meat to reach the outer layers. This has
very tender and succulent results.
Tips
– Use lean meat which has been
correctly hung and trimmed. Bones
should be removed before cooking.
– For searing, use a suitable cooking
oil or fat that can withstand high
temperatures (e.g. clarified butter,
vegetable oil).
– Do not cover meat during cooking.
Cooking takes between 2-4 hours
depending on the size and weight of
the meat and on how well cooked you
want it as well as the level of browning
required.
90
Cooking duration/Core
temperatures
Meat
Sirloin joint
– Rare
– Medium
– Well-done
Pork fillet
Gammon*
Saddle of veal*
Saddle of lamb*
* Boned
Duration
[min]
Core
temper
ature
[°C]
60–90
120–150
180–240
120–150
150–210
180–210
90–120
48
57
69
63
68
63
60
After cooking
Because the cooking and core
temperatures are very low:
– Meat can be carved straight from the
oven. It does not need to rest.
– The cooking result will not be
affected if the meat is left in the oven
after the programme has finished. It
can be kept warm until you serve it.
– The meat is an ideal temperature to
eat straight away. Serve on
pre-heated plates with very hot
sauce or gravy to prevent it cooling
down too quickly.
Low temperature cooking
Using the "Low temperature
cooking" special application
^ Select "Special applications".
^ Select "Low temp. cooking".
,Take care: the top heating
element / grill element in the oven
will be hot. Danger of burning.
^ Set the temperature.
^ Insert the plug of the food probe into
the socket until you feel it engage.
^ Set the core temperature.
^ Close the door.
^ Follow the instructions in the display.
Place the universal tray and rack in
the oven for the pre-heating phase.
^ Whilst the oven is pre-heating, sear
the meat thoroughly on the hob.
,Danger of burning. Use oven
gloves when placing food in the
oven, turning or removing it and
when adjusting oven shelves etc. in
a hot oven.
At the end of the programme, "Process
finished" will appear in the display and
a buzzer will sound if the buzzer is
switched on (see "Settings – Buzzer
tones").
If the meat is not cooked to your
satisfaction you can cook it for longer.
^ As soon as "Use the food probe"
appears in the display, place the
seared meat on the rack and insert
the metal tip of the food probe fully
into the centre of the meat.
Please also refer to the information in
"Roasting - Food probe".
^ Place the universal tray on the rack
and then place the rack into the oven
on the shelf level quoted.
91
Low temperature cooking
Low temperature cooking setting the temperature
manually
Use the universal tray with the rack
placed on top of it.
Do not use the Rapid heat-up
function to pre-heat the oven.
^ Place the rack together with the
universal tray on shelf level 2.
^ Select Conventional heat V and a
temperature of 130 °C.
^ Switch Rapid heat-up off by selecting
"Change – Heating-up phase –
Normal".
^ Pre-heat the oven together with the
universal tray and rack for approx.
15 minutes.
^ Whilst the oven is pre-heating, sear
the meat thoroughly on the hob.
,Danger of burning. Use oven
gloves when placing food in the
oven, turning or removing it and
when adjusting oven shelves etc. in
a hot oven.
92
^ Place the seared meat on the rack.
^ Select "Change".
^ Select "Temperature" and a
temperature of 100 °C.
^ Continue cooking until the end of the
cooking duration.
You can set this procedure to finish
automatically (see "Using the oven further functions").
Grilling
,Danger of burning.
Trays and racks
Grill with the oven door closed. If
you grill with the door open, hot air
will escape from the oven instead of
being cooled by the cooling fan.
The controls will get hot.
Oven functions
Full grill Y
For grilling thin cuts (e.g. steaks) in
large quantities and for browning large
baked dishes
The whole of the top heating / grill
element is switched on and glows red
in order to create the heat required.
Economy grill Z
Use the universal tray with the rack or
anti-splash insert (if available) on top.
The juices from the food being cooked
collect under the insert. This prevents
them from spitting and making the oven
dirty. The juices can then be used for
making gravy and sauces.
Do not use the baking tray.
For grilling thin cuts (e.g. steaks) in
small quantities and for browning small
baked dishes
Only the inner part of the top heating /
grill element is switched on in order to
create the heat required.
Fan grill \
For grilling larger items, e.g. rolled
meat, poultry.
The top heating / grill element and the
fan switch on and off alternately.
93
Grilling
Notes on the grilling chart
Testing to see if cooked
Temperature 6
One way of finding out how well a piece
of meat has been cooked is to press
down on it with a spoon:
As a general rule, select the lower
temperature given in the chart. If higher
temperatures are used, the meat will
brown on the outside, but will not be
properly cooked through.
Pre-heating
Always pre-heat the grill for approx.
5 minutes with the door closed.
Shelf levels ‡
Select the shelf level according to the
thickness of the food.
Rare:
If the meat gives easily to
the pressure of the spoon,
it will still be red on the
inside.
Medium:
If there is some resistance,
the inside will be pink.
Well-done If there is very little
resistance, it is cooked
through.
Check if the meat is cooked after the
shortest time quoted.
– Thin cuts: Shelf level 3/4
– Thicker cuts: Shelf level 1/2
Tip
Grilling duration +
If the surface of thicker cuts of meat is
cooked but the centre is still raw,
continue grilling at a lower temperature
setting or use a lower shelf level to
allow the food to cook through to the
centre.
– Flat pieces of fish and meat usually
take 6–8 minutes per side. Thicker
pieces require more time for each
side. It is best to grill food of a similar
thickness at the same time so that
the grilling time for each item does
not vary too greatly.
– Turn the food halfway through
grilling.
94
Grilling
Preparing food for grilling
Grilling
Trim the meat. Do not season meat with
salt before grilling as this draws the
juices out.
^ Place the rack or the anti-splash
insert (if available) in the universal
tray.
Add a little oil to lean meat if necessary.
Do not use other types of fat as they
can burn and cause smoke.
^ Place the food on top.
Clean fish in the normal way. To
enhance the flavour, add a little salt or
squeeze a little lemon juice over the
fish.
^ Pre-heat the grill for approx.
5 minutes with the door closed.
^ Select the required oven function and
the temperature.
,Danger of burning.
Use oven gloves when placing food
in the oven, turning or removing it
and when adjusting oven shelves
etc. in a hot oven.
^ Place the food on the appropriate
shelf level (see the Grilling chart).
^ Close the door.
^ Turn the food halfway through
grilling.
95
Grilling
Grilling chart
The data for the recommended function is printed in bold.
Pre-heat the grill for approx. 5 minutes with the door closed, unless advised
otherwise.
Turn the food halfway through the cooking time.
Check the food after the shortest time quoted.
Y/Z
Food to be grilled
‡
\
6
+
6
+
[°C]
[min]
[°C]
[min]
4
275
15–22
220
15–20
Thin cuts
Steak
1)
4
300
15–22
–
–
Kebabs
3
275
25–30
220
25–30
Chicken kebabs
4
275
20–25
220
12–16
Pork chops
4
275
15–20
220
17–23
Liver
4
275
8–12
220
12–15
Burgers
4
275
13–18
220
18–22
Sausages
4
275
12–18
220
13–19
Fish fillet
4
275
20–25
220
13–18
Beef burgers
Trout
4
275
16–20
220
20–25
Toast 1) 2)
3
300
5–10
220
7–10
Cheese toast
3
275
10–15
220
10–15
Tomatoes
4
275
6–10
220
8–10
Peaches
4
275
6–10
220
15–20
Chicken, approx. 1.2 kg 3)
1
220
60–70
190
60–70
Pork, approx. 1 kg
1
–
–
190
95–100
Sirloin joint, fillet, approx. 1 kg
2
–
–
250
35–45
Thicker cuts
Y Full grill / Z Economy grill / \ Fan grill / ‡ Shelf level / 6 Temperature / + Grilling
duration
1) The settings also apply when using the Full grill Y function for testing in accordance
with EN 60350.
2) Do not pre-heat the grill.
3) Use shelf level 2 for Fan grill \.
96
Special applications
Your oven has the following Special
applications in addition to the
Automatic programmes:
– Defrost
– Drying food
This section also gives information the
following applications:
– Gentle bake
– Bottling
– Frozen food/Ready meals
– Reheat (Reheating plated meals)
– Heat crockery
– Prove dough
– Low temperature cooking
This Special application is described
in "Low temperature cooking".
– Pizza
– Sabbath programme
97
Special applications
Defrosting
Defrosting durations
Use the Defrost function to gently
defrost frozen food.
^ Select "Special applications".
The time needed for defrosting
depends on the type and weight of the
food, and at what temperature it was
deep frozen. The following chart is for
guidance only. It is important to check
that food is thoroughly defrosted.
^ Select "Defrost".
Frozen food
^ Alter the recommended temperature
if necessary and then set the
duration.
Chicken
Meat
The temperature can be set between
25 and 50 °C.
^ Follow the instructions in the display.
Air is circulated throughout the cabinet
to gently defrost the food.
,Danger of salmonella poisoning.
It is particularly important to observe
food hygiene rules when defrosting
poultry. Do not use the liquid from
the defrosted poultry. Pour it away,
and wash the tray, the sink and your
hands.
Tips
– Where possible, remove the
packaging and put the food to be
defrosted on the universal tray or into
a suitable dish.
– When defrosting poultry, put it on the
rack over the universal tray to catch
the defrosted liquid so that the meat
is not lying in this liquid.
– Meat, poultry and fish do not need to
be fully defrosted before cooking.
Defrost so that the surface is
sufficiently soft to take herbs and
seasoning.
98
Sausages
Fish
Strawberries
Butter cake
Bread
Weight
[g]
800
500
1 000
500
1 000
300
500
500
Duration
[min]
90–120
60–90
90–120
30–50
60–90
30–40
20–30
30–50
Special applications
Drying food
^ Follow the instructions in the display.
This programme is designed for
traditional style drying of food to
preserve it.
Food
Drying time
Fruit
2–8 hours
Vegetables
3–8 hours
Herbs*
50–60 minutes
* Because this programme uses the
fan you should use Conventional
heat V with a temperature of
80–100 °C for drying herbs.
The temperature can be set between
80 and 100 °C.
It is important that fruit and vegetables
are ripe and not bruised before they are
dried.
^ Prepare the food for drying
– Peel and core apples, and cut into
slices 0.5 cm thick.
– Stone plums, if necessary.
– Peel, core and cut pears into thick
wedges.
– Peel and slice bananas.
– Clean mushrooms and cut them in
half or slice them.
– Remove parsley and dill from the
stem.
^ Distribute the food evenly over the
universal tray.
^ Reduce the temperature if
condensation begins to form in the
oven.
,Danger of burning. Wear oven
gloves when removing the dried
food from the oven.
^ Allow the dried fruit or vegetables to
cool down after drying.
Dried fruit must be completely dry,
but also soft and elastic.
^ Store in sealed glass jars or tins.
You could also use the rack or
perforated baking tray, if you have one.
^ Select "Special applications".
^ Select "Drying".
^ Alter the recommended temperature
if necessary and then set the
duration.
99
Special applications
Reheat
Heat crockery
This programme uses moisture and is
designed for reheating plated meals.
This programme is designed to
pre-heat your crockery.
You can select:
– Meat + veg
– Meat + potatoes
– Meat + dumplings
– Meat + pasta
– Fish + vegetables
– Fish + potatoes
– Vegetable bake
– Pasta bake
– Pasta in sauce
– Pizza
– Ragout
The temperature can be set between
50 and 80 °C.
Use heat-resistant crockery.
^ Place the food to be reheated in its
dish on the rack. Do not cover it.
^ Select "Special applications".
^ Select "Reheat" and alter the
recommended temperature if
necessary.
^ Follow the instructions in the display.
,Danger of burning.
Wear oven gloves when removing
the dishes from the oven.
Droplets of water may have
accumulated underneath the dish.
100
Use heat-resistant crockery.
^ Place the rack on shelf level 2 and
place the crockery to be pre-heated
on it.
^ Select "Special applications".
^ Select "Heat crockery".
^ Alter the recommended temperature
if necessary and then set the
duration.
^ Follow the instructions in the display.
,Danger of burning
Wear oven gloves when removing
dishes from the oven.
Special applications
Prove dough
Pizza
This programme does not use
additional moisture and is designed for
proving yeast dough.
This programme is designed
specifically for baking pizza.
The temperature can be set between
30 and 50 °C.
^ Select "Special applications".
^ Select "Prove dough"
^ Alter the recommended temperature
if necessary and then set the
duration.
^ Follow the instructions in the display.
The temperature can be set between
160 and 250 °C.
^ Select "Special applications".
^ Select "Pizza".
^ Alter the recommended temperature
if necessary and then set the
duration.
^ Follow the instructions in the display.
If you wish to prove dough with the
addition of moisture, select the
relevant Automatic programme.
101
Special applications
Sabbath programme
To use the Sabbath programme
This programme is for religious
observance.
^ Select "Special applications".
Select the Sabbath programme and
then select the oven function and
temperature.
^ Select the oven function you want.
The programme will only start after the
door is opened and closed:
– The cooking process will begin after
approx. 5 minutes using
Conventional heat V or Bottom
heat X.
– The oven will heat up to the
temperature you have set and will
maintain this temperature for a
maximum of 72 hours.
– The interior lighting does not come
on, even when the door is opened.
If you have selected "Settings –
Lighting – On", the lighting will remain
switched on throughout the
programme.
– "Sabbath programme" will show in
the display throughout the
programme.
– The time of day display is switched
off.
A Sabbath programme that has been
started cannot be changed, nor can it
be saved under "User programmes".
The programme can only be cancelled
by switching the oven off.
102
^ Select "Sabbath programme".
The Sabbath programme cannot be
started if the minute minder is being
used.
^ Set the temperature.
^ Select "OK".
The oven is now ready for placing the
food in it.
^ Open the door when you want to start
the programme.
^ Place the food in the oven.
^ Close the door.
The oven heating will switch on after 5
minutes.
If you want to end the programme early:
^ Touch the On/Off sensor K and wait
until the oven switches itself off
automatically.
Special applications
Gentle bake
The Gentle bake programme is ideal for
cooking meat.
The temperature can be set between
100 and 250 °C.
^ Select "Oven functions".
Examples of use
Food
6
[°C]
+
[min]
Ham roast,
approx. 1.5 kg
180 130–160
Braised beef,
approx. 1.5 kg
180 160–180
^ Select "Gentle bake" and change the
recommended temperature if
necessary.
6 Temperature
^ Follow the instructions in the display.
+ Duration
The durations given are for an oven
which has not been pre-heated.
Use shelf level 1 or 2 depending on the
height of the food.
In general, if a range of temperatures is
given, it is best to select the lower
temperature and to check the food after
the shortest duration.
Roast with the lid on first, then remove
the lid three-quarters of the way
through roasting and add approx. ½
litre liquid.
103
Special applications
Frozen food / Ready meals
Tips
Cakes, pizza, baguettes
– Large frozen items such as cakes,
pizzas or baguettes cover an
extensive area of the baking tray or
universal tray.
The temperature difference if large
frozen items are cooked in these
trays can cause the tray to distort in
such a way that it cannot be
removed from the oven when it is hot.
Further use will make the distortion
worse. Place this type of food on
baking parchment on the rack to
prevent the risk of this happening.
– Use the lowest temperature
recommended on the manufacturer's
packaging.
Oven chips, croquettes or similar
items
– Small items of frozen food such as
oven chips can be cooked on the
baking tray or universal tray.
Place baking parchment on the tray
so that they cook gently.
– Use the lowest temperature
recommended on the manufacturer's
packaging.
– Turn several times during cooking.
104
Method
Eating food which has been cooked
correctly is important for good
health.
Only bake cakes, pizza, chips etc.
until they are golden. Do not
overcook them.
^ Select the function and temperature
recommended on the manufacturer's
packaging.
^ Pre-heat the oven.
^ Place the food in the pre-heated oven
on the shelf level recommended on
the packaging.
^ Check the food at the end of the
shortest time recommended on the
packaging.
Tip: This oven offers Automatic
programmes for some Frozen food/
Ready meals (see "Automatic
programmes").
Cleaning and care
,Danger of burning. Make sure
the oven heating elements are
switched off and that the oven cavity
is cool.
,Danger of injury. Do not use a
steam cleaning appliance to clean
this appliance. The steam could
reach electrical components and
cause a short circuit.
Unsuitable cleaning agents
To avoid damaging the surfaces, do not
use:
– cleaning agents containing soda,
ammonia, acids or chlorides,
– cleaning agents containing
descaling agents on the oven front,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– solvent-based cleaning agents,
All external surfaces are susceptible
to discolouration or change in
appearance if unsuitable cleaning
agents are used.
Oven cleaners and descaling
agents will damage the front of the
oven, in particular.
Residues of cleaning agents must
be removed immediately after use.
All surfaces are also susceptible to
scratches. Scratches on glass
surfaces could even cause a
breakage in certain circumstances.
– stainless steel cleaning agents,
– dishwasher cleaner,
– glass cleaning agents,
– cleaning agents for ceramic hobs,
– hard, abrasive brushes or sponges,
e. g. pot scourers, brushes or
sponges which have been previously
used with abrasive cleaning agents,
– melamine eraser blocks,
– sharp metal scrapers or tools,
– wire wool,
– spot cleaning,
– oven cleaner*,
– stainless steel spiral pads*.
* these can, however, be used to
remove very heavy soiling from
PerfectClean treated surfaces.
105
Cleaning and care
Normal soiling
Soiling might become impossible to
remove if it is not dealt with.
Continued use of the oven without
regular cleaning will make it much
harder to keep clean.
Soiling is, therefore, best removed
after each use of the oven.
The accessories are not
dishwasher-proof.
Useful tips
– Soiling caused by spilt juices and
cake mixtures is best removed whilst
the oven is still warm. Exercise
caution and make sure the oven is
not too hot - danger of burning.
– To make cleaning easier you can
dismantle the oven door, remove the
side runners and the FlexiClip
runners (if present) and lower the top
heating/grill element.
There is a fibreglass seal around the
oven interior which seals the inside
of the door. It is sensitive to
abrasion and rubbing.
To prevent the risk of damaging it
do not clean it.
^ It is best to remove normal soiling
immediately using a clean sponge
and a solution of hot water and
washing-up liquid or with a clean,
damp microfibre cloth.
^ After cleaning make sure all residual
cleaning agent is thoroughly
removed with clean water. This is
particularly important when cleaning
PerfectClean surfaces as cleaning
agent residues can impair the
non-stick properties.
^ After cleaning and rinsing, wipe the
surfaces dry using a soft cloth.
Food probe
^ Clean the food probe with a damp
cloth only.
Do not put the food probe into water
or clean it in the dishwasher as this
will damage it.
106
Cleaning and care
Stubborn soiling (does not
apply to the FlexiClip runners)
Spilt fruit and roasting juices may
cause lasting discolouration or matt
patches on enamelled surfaces.
This discolouration is permanent but
will not affect the efficiency of the
finish. Do not try to remove this
discolouration! Clean these
following the instructions given here.
Non-Miele oven spray must only be
used in a cold oven and for no longer
than a maximum of 10 minutes.
^ You can then also use the scouring
pad on the back of a washing-up
sponge to remove the soiling.
^ After cleaning, remove all oven
cleaning agent residues thoroughly
with clean water, and dry with a soft
cloth.
^ Baked on deposits can be removed
with a glass scraper or a
non-abrasive stainless steel spiral
pad.
^ Very stubborn soiling on
PerfectClean treated enamel can be
cleaned using Miele oven cleaner. It
must be applied to cold surfaces in
accordance with instructions on the
packaging.
107
Cleaning and care
Pyrolytic cleaning ^ of the
oven interior
Instead of cleaning the oven by hand,
you can use Pyrolytic (cleaning) ^.
During pyrolytic cleaning the oven
interior is heated up to over 400 °C. Any
residual soiling is broken down and
reduced to ash by the high
temperatures.
This oven has three levels of pyrolytic
cleaning, each with a different duration.
Select:
– Level 1 for light soiling
– Level 2 for heavier soiling
– Level 3 for very heavy soiling
For safety reasons the oven door is
automatically locked at the beginning of
the pyrolytic cleaning process.
It cannot be opened until the cleaning
process has finished.
Setting up for pyrolytic cleaning
The high temperatures used during
pyrolytic cleaning will damage
accessories that are not designed
for pyrolytic cleaning.
Please remove these accessories
from the oven interior before starting
pyrolytic cleaning. This also applies
to non-pyrolytic accessories
purchased separately to the oven.
The following accessories are suitable
for pyrolytic cleaning and can be left in
the oven:
– Side runners
– FlexiClip telescopic runners HFC72
– Rack HBBR72
^ Take all non-pyrolytic accessories out
of the oven.
^ Place the rack on the top shelf level.
The timer can be used to delay the start
of pyrolytic cleaning, for instance to
make use of cheaper electricity tariffs.
If not removed coarse soiling can
smoke and cause the pyrolytic
cleaning process to switch off.
At the end of pyrolytic cleaning any
residues such as ash from the pyrolytic
process can be easily wiped away.
^ Coarse soiling should be removed
before starting pyrolytic cleaning.
108
Cleaning and care
Starting pyrolytic cleaning
,Danger of burning.
The oven door gets much hotter
during the pyrolytic process than
during normal use.
Make sure children cannot touch the
oven whilst pyrolytic cleaning is in
progress.
^ Select "Maintenance".
^ Select "Pyrolytic".
The pyrolytic cleaning level will be
highlighted.
You can select Level 1, 2 or 3 with "+"
or "–".
The oven lighting will not come on
during pyrolytic cleaning.
The time remaining for pyrolitic
cleaning will appear in the display. You
cannot alter the duration.
If you have set a minute minder at the
same time as running pyrolytic
cleaning, the buzzer will sound and the
N symbol will start flashing at the end
of the minute minder duration. The time
will then continue to increase in the
display.
The buzzer will stop and the visual
indicators will go out as soon as you
touch the N sensor.
^ Select the level required.
"Start later"
^ Select "OK".
To start pyrolytic cleaning later on:
Follow the instructions in the display.
^ Select "OK".
"Start now"
To start pyrolytic cleaning straight
away:
^ Select "Start now".
Pyrolytic cleaning will now start.
The door locks automatically.
The oven heating and the cooling fan
will then switch on automatically.
^ Select "Start later".
^ Set the time you want it to start at.
^ Select "OK".
The door will lock automatically.
"Start at" and the start time set will
appear in the display. You can alter the
start or end time up until the process is
due to start via "Change".
As soon as the start time is reached,
the oven heating and the cooling fan
will switch on automatically. The
duration remaining will show in the
display.
109
Cleaning and care
At the end of pyrolytic cleaning
with a stainless steel spiral pad and
a little washing-up liquid.
When the duration remaining reaches
0:00 h, a message will appear in the
display to tell you that the door is
unlocking.
^ Extend and retract the FlexiClip
telescopic runners several times after
pyrolytic cleaning.
When the door lock has been released
Please note:
– "Process finished" will appear in the
display,
– The fibre glass seal around the front
of the oven should be handled
carefully. Do not rub and scour it.
If possible you should avoid trying to
clean it.
– a buzzer will sound if the buzzer
volume has been set (see "Settings Buzzer tones").
^ Switch the oven off.
The visual and acoustic signals are
switched off.
,Danger of burning
Wait until the oven has cooled down
before removing residual soiling left
in the oven compartment from
pyrolytic cleaning.
^ Wipe any residues (e.g. ash) left
behind after pyrolytic cleaning out of
the oven compartment and wipe any
residues off any pyrolytic
accessories. The amount of ash will
vary depending on how dirty the
oven was.
Most soiling can be easily removed
using a clean, damp microfibre cloth,
or with hot water and a little
washing-up liquid on a clean
sponge.
Depending on how dirty the oven
was there may be a visible layer of
soiling across the inner glass pane
on the door. This should be removed
using the pad on the reverse of a
non-scouring washing-up sponge or
110
– After pyrolytic cleaning, the FlexiClip
telescopic runners may appear
discoloured or a lighter colour in
some places. This will not affect the
functioning of the runners in any way.
– Spilt fruit juices may cause lasting
discolouration to enamelled surfaces.
This discolouration is permanent but
will not affect the efficiency of the
enamel. Do not attempt to remove
these marks.
Cleaning and care
If pyrolytic cleaning is cancelled
If pyrolytic cleaning is cancelled the
oven door will remain locked until the
temperature inside the oven drops to
below 280 °C.
The following will cause pyrolytic
cleaning to be cancelled:
– Switching the oven off.
"Switch appliance off?" will appear in
the display.
^ Select "Yes" if you want to cancel
pyrolytic cleaning.
The door will unlock once the
temperature in the oven has dropped
below 280 °C and the oven is
switched off.
– A power cut.
"Process cancelled" will appear in
the display if there is a power cut.
The door will unlock once the
temperature inside the oven is below
280 °C.
A buzzer will sound if the buzzer is
switched on (see "Settings - Buzzer
tones").
"Process finished" will appear in the
display.
^ Touch #.
^ Start pyrolytic cleaning again.
^ Select "No" if you want to continue
with pyrolytic cleaning.
Pyrolytic cleaning will continue.
111
Cleaning and care
Removing the door
Do not attempt to take the door off
the retainers when it is in the
horizontal position as the retainers
will spring back against the oven.
Do not use the handle to pull the
door off the retainers as the handle
could break.
^ Raise the door up till it rests open.
The oven door is connected to the
hinges by retainers.
Before removing the door from the
retainers, the locking clamps on both
hinges have to be released.
^ Open the door fully.
^ Release the locking clamps by
turning them as far as they will go.
112
^ Holding the door securely at both
sides lift it upwards off the retainers.
Make sure you take it off straight.
Cleaning and care
Dismantling the door
The oven door is an open system with
four glass panes which have a
heat-reflective coating on some of their
surface.
When the oven is operating, air is
directed through the door to keep the
outer pane cool.
If soiling has worked its way in between
the glass panes, the door can be
dismantled in order to clean in between
the panes.
Take particular care as scratches
can damage the glass.
When cleaning the glass panes do
not use abrasive cleaning agents,
hard sponges or brushes and do not
use sharp metal tools or scrapers.
Please also read the general notes
on cleaning the oven front before
cleaning the glass panes.
The glass panes are coated in
different ways with a heat-reflective
coating on the sides facing into the
oven cavity. The glass panes must
be fitted the right way round after
being cleaned.
Oven spray will damage the
aluminium trims inside the door.
These should only be cleaned using
hot water and washing-up liquid
applied with a clean sponge or a
clean, damp microfibre cloth.
Be especially vigilant after
dismantling the door that the glass
panes do not break.
113
Cleaning and care
,Danger of injury.
Always remove the door before
dismantling it.
You can now remove the inner panes
and the two middle panes one after the
other.
^ Place the door on a protective
surface (e.g. on a tea towel) to
prevent it getting scratched. The
door handle should line up with the
edge of the table. Make sure the
glass lies flat and does not get
broken during cleaning.
^ Gently lift the inner pane up and out
of the plastic strip.
^ Flip the two glass pane retainers
outwards to open them.
^ Remove the seal.
114
Cleaning and care
Then reassemble the door carefully:
The two middle panes are identical.
To help you put them back in
correctly the material number is
printed on the panes.
^ Refit the lower of the two middle
panes in such a way that the material
number is legible.
^ Gently lift the top of the two middle
panes up and take it out.
^ Then lift the bottom of the two middle
panes up gently and take it out.
^ Clean the door panes and other
individual parts with a clean sponge
and a solution of hot water and
washing-up liquid or a clean damp
microfibre cloth.
^ Flip both the glass pane retainers
inwards in such a way that they fit
over the lower of the two middle
panes.
^ Then refit the upper of the middle two
panes in such a way that the material
number is legible. The glass pane
should lie on top of the retainers.
^ Dry all parts with a soft cloth.
115
Cleaning and care
^ Refit the seal.
^ Flip both the glass pane retainers
inwards to close them.
The door is now reassembled and is
ready to fit back on the oven.
^ Push the inner pane with the matt
printed side facing downwards into
the plastic strip and place it between
the retainers.
116
Cleaning and care
Refitting the door
^ Open the door fully.
It is essential that the locking
clamps lock securely when the door
is refitted after cleaning. Otherwise
the door could could work loose
from the retainers and be damaged.
^ Hold the door securely at both sides
and carefully fit it back into the hinge
retainers.
^ Flip both locking clamps back up as
far as they will go into a horizontal
position.
117
Cleaning and care
Removing the side runners
with FlexiClip runners
,Danger of injury.
Do not use the oven without the side
runners.
You can remove the side rails together
with the FlexiClip runners (if present).
If you wish to remove the FlexiClip
runners separately beforehand, please
follow the instructions in "Features –
Fitting and removing the FlexiClip
runners".
,Danger of burning.
Make sure the oven heating
elements are switched off and cool.
118
^ Pull the rails out of holder (1) at the
front of the oven and then pull them
out of the oven (2).
Refit in the reverse order.
^ Take care and ensure that all parts
are correctly fitted.
Cleaning and care
Lowering the top heat/grill
element
,Danger of burning.
Make sure the oven heating
elements are switched off and cool.
^ Remove the side runners.
^ Undo the wing nut.
Do not use force to lower the top
heat/grill element as this can cause
it to break.
^ Carefully lower the top heat/grill
element.
You can now clean the roof of the oven.
^ Raise the top heat/grill element and
tighten the wing nut securely.
^ Refit the side runners.
119
Cleaning and care
Descaling the steam injection
system F
When to run the descaling process
The frequency of descaling will depend
on the water hardness level in your
area.
The descaling process can be run at
any time.
However, to ensure that the oven
functions correctly you will be
automatically prompted to run the
descaling process after a certain
number of programmes.
The oven will let you know when only 10
programmes can be run before you
have to run the descaling process. The
programmes will count down to 0 in the
display. You will then not be able to run
any function or Automatic programme
using moisture.
They cannot be used until descaling
has been carried out.
All other functions and Automatic
programmes without moisture can still
be used.
120
Sequence of a descaling cycle
Once the descaling process has
been started it must be completed
through to the end. It cannot be
cancelled.
The descaling cycle takes approx.
90 minutes and consists of several
steps:
1. Preparation
2. Descaler intake
3. Activation phase
4. Rinse 1
5. Rinse 2
6. Rinse 3
7. Evaporate residual moisture
Cleaning and care
Preparation
Carrying out the descaling process
We recommend using the descaling
tablets supplied. They have been
specially developed for Miele for
optimum cleaning results.
A Select "Maintenance".
Other descaling agents, which
contain other acids besides citric
acid and/or other undesirable
substances, such as chlorides for
example, could cause damage.
Moreover, the descaling effect
required could not be guaranteed if
the descaling solution was not of the
appropriate concentration.
Miele descaling tablets are available to
order from Miele or via the internet at
www.miele-shop.com.
B Select "Descale".
If the Moisture plus d function and
the Automatic programmes that use
moisture are already locked, the
descaling process can be started
immediately by touching the "OK"
sensor.
C Push the universal tray into the oven
on the top shelf level as far as it will
go to collect the descaling solution
after it has been used. Confirm the
message with "OK".
You will need a container of approx.
1 litre capacity.
Follow the instructions for the mixing
ratio carefully. Otherwise the oven
will be damaged.
^ Dissolve one descaling tablet in
approx. 600 ml of cold tap water.
^ Make sure the plastic tube with
suction cap supplied is to hand.
D Place the container with the
descaling solution on the floor of the
oven.
121
Cleaning and care
E Attach one end of the plastic tube to
the water intake pipe.
F Place the other end of the plastic
tube in the bottom of the descaling
solution container and secure the
plastic tube to the container with the
suction cup.
G Close the door.
H Select "OK".
The intake process will begin. You can
hear the pump while this is happening.
The intake process can be
interrupted and restarted at any time
by selecting "Stop" or "Start".
The amount of solution specified can
be more than the amount which is
actually taken in. Some of the solution
may therefore be left in the container at
the end of descaling.
A message will appear in the display
when the intake process is finished.
I Select "OK".
122
The activation phase will begin. You
can follow the duration as it counts
down.
J Open the door.
K Leave the container with the tube
connected to the water intake pipe in
the oven. Top the container up with
approx. 300 ml of water, as the
system will need to draw in some
more liquid during the activation
phase.
L Close the door.
The system will take in more liquid at
approximately 5 minute intervals. You
will hear the noise of the pump for a
moment or so.
The oven lighting and the cooling fan
will remain on during descaling.
At the end of the activation phase a
buzzer will sound, if the buzzer is
switched on (see "Settings - Buzzer
tones").
Cleaning and care
At the end of the activation phase the
steam injection system will need to be
cleaned to remove all traces of
descaling solution.
Cleaning is carried out by flushing
approx. 1 litre of fresh tap water
through the system. The water is
collected in the universal tray. This
process is repeated three times.
A message will appear in the display
with advice about the rinsing process.
M Take the universal tray out of the
oven and empty it. Place the tray
back in the oven again on the top
shelf level.
N Detach the plastic tube from the
container.
O Rinse the container and fill with
approx. 1 litre of fresh tap water.
P Place the container back in the oven,
insert the plastic tube, secure it to
the container and close the door.
Q Select "OK".
The intake process for the first rinse
starts.
Water will be flushed through the steam
injection system and will then collect in
the universal tray.
A message will appear in the display
with advice about the second rinsing
process.
R Take the universal tray out of the
oven and empty it. Place the tray
back in the oven again on the top
shelf level.
S Detach the plastic tube from the
container. Fill it with approx. 1 litre of
fresh tap water.
T Place the container back in the oven,
insert the plastic tube, secure it to
the container and close the door.
U Select "OK".
V Do the same for the third rinsing
process.
Leave the universal tray (with the
water which has collected in it) on the
top oven shelf whilst the evaporation
process takes place.
123
Cleaning and care
The Evaporate residual moisture
process will begin after the third rinsing
process.
Steam can cause scalding injuries.
Do not open the door during the
evaporation process.
W Remove the container and tube from
the oven.
X Close the door.
Y Select "OK".
The oven heating will switch on and the
duration for the evaporation process
will count down in the display.
During the evaporation process, the
duration may be adjusted by the
system according to how much water is
currently present.
At the end of the evaporation process a
message will appear in the display with
advice on cleaning after running the
descaling programme.
Z Select "OK".
A buzzer will sound if the buzzer is
switched on (see "Settings - Buzzer
tones").
"Process finished" will appear in the
display.
[ Touch # to return to the main menu.
124
,Danger of burning.
Allow the oven interior and
accessories to cool down before
cleaning them.
\ Remove the universal tray and empty
it. Clean the oven interior to remove
any condensation and descaling
agent residue.
Leave the oven door open until the
oven interior is completely dry.
Problem solving guide
With the aid of the following guide, minor problems can be easily corrected
without contacting Miele. The following guide may help you to find the reason for a
fault, and to correct it. If having followed the suggestions below, you still cannot
resolve the problem, please contact Miele (see back cover for contact details).
,Danger of injury.
Installation, maintenance and repairs may only be carried out by a suitably
qualified and competent person. Repairs and other work by unqualified
persons could be dangerous.
Miele cannot be held liable for unauthorised work.
Do not attempt to open the casing of the oven yourself.
Problem
The display is dark.
Possible cause and remedy
The time of day is switched off. It will not appear in the
display until the oven is switched on.
The time can be displayed constantly (see "Settings - Time
- Display").
There is no power to the oven.
^ Check whether the mains fuse has tripped. If it has,
contact a qualified electrician or Miele.
When the oven is
switched on "System
lock 0" will appear in
the display.
The system lock 0 is active.
It can be released by pressing the OK sensor for at least
6 seconds.
The system lock can be permanently deactivated (see
"Settings – System lock 0").
125
Problem solving guide
Problem
Possible cause and remedy
The oven does not heat ^ Check whether "On" has been selected for demo
mode (see "Settings - Showroom programme").
up.
If demo mode has been switched on the oven can be
operated but it will not heat up.
^ Deactivate demo mode.
"Power cut - Process
cancelled" appears in
the display.
There has been a power cut which has caused a
current process to stop.
^ Switch the oven off and then back on again.
Start the cooking programme again.
12:00 appears in the
display.
The power supply was interrupted for longer than 200
hours.
^ Reset the time and date.
The message
"Maximum operating
duration reached"
appears unexpectedly
in the display.
The oven has been operating for an unusually long time
and this has activated the safety switch-off function.
^ Select "OK". Touch # to delete "Process finished".
The oven will then be ready for use again.
126
Problem solving guide
Problem
"Door not locked" will
appear in the display.
"Door not released" will
appear in the display.
Possible cause and remedy
The Pyrolytic cleaning programme door lock is not
locking.
^ Switch the oven off and then back on again.
Then restart the Pyrolytic cleaning programme.
If the fault code appears in the display again call the
Miele Service Department.
The door lock for the Pyrolytic cleaning programme is
not being released.
^ Switch the oven off and then back on again.
If the door lock still does not release itself call the Miele
Service Department.
"; Fault XX" appears in There is a problem that you cannot resolve.
the display.
^ Call the Miele Service Department.
The message "Function
currently not available"
appears in the display
after selecting the
"Descale" function.
The message "Fault with
moisture control - the
automatic programmes
will operate without
moisture" appears in the
display after selecting
an Automatic
programme.
The steam injection system is faulty.
^ Call the Miele Service Department.
The steam injection system is faulty.
^ Call the Miele Service Department.
Automatic programmes can be run without using
moisture.
127
Problem solving guide
Problem
After selecting the
Moisture plus d
function "Fault with
moisture control Moisture plus
programme not
available" appears in
the display.
Programmes using
moisture will not take in
water.
Possible cause and remedy
The steam injection system is faulty.
^ Call the Miele Service Department.
^ Use the Fan plus U function instead of the Moisture
plus d function.
^ Check whether "On" has been selected for demo
mode has been activated (see "Settings - Showroom
programme").
The oven can be used in demo mode but the pump for
the steam injection system will not work.
^ Deactivate demo mode.
^ Check that the food probe is engaged in the socket
The food probe is not
recognised by the oven. properly.
You cannot enter a core
If the oven still does not recognise the food probe it
temperature.
must be faulty.
A replacement food probe can be ordered from Miele
or from your Miele dealer.
A noise can be heard
The fan remains switched on after a cooking
after a cooking process. programme (see "Settings - Cooling fan run-on").
The rack and other
The pyrolytic resistant surface of the side runners
accessories make a
creates friction when accessories are being pushed
noise when being
into or pulled out of the oven.
pushed into or pulled
To reduce the friction, add a few drops of heat resistant
out of the oven.
cooking oil to some kitchen paper and use this to
lubricate the side runners.
Repeat this after each pyrolytic cleaning process.
128
Problem solving guide
Problem
The oven has switched
itself off.
Possible cause and remedy
The oven will switch itself off automatically to save
energy if no other action is taken within a certain time
frame after switching it on or after the end of a cooking
programme.
^ Switch the oven back on.
Cakes and biscuits are A different temperature from the one given in the recipe
not cooked properly
was used.
after following the times ^ Select the temperature required for the recipe.
given in the chart.
The ingredient quantities are different from those given
in the recipe.
^ Double check the recipe. The addition of more liquid
or more eggs makes a moister mix which would take
longer to cook.
Browning is uneven.
The wrong temperature or shelf level was selected.
^ There will always be a slight unevenness. If the
unevenness is pronounced, check that the correct
temperature and shelf level have been selected.
The material or colour of the baking tin is not suitable
for the oven function.
^ With Conventional heat V light coloured, shiny tins
are less suitable. Use matt, dark coloured tins.
The catalyser has been set at too high a level. This can
lead to an uneven browning result on more delicate
food such as sponge cakes.
^ Set the odour reduction catalyser to a lower level or
switch it off (see "Settings - Catalyser").
129
Problem solving guide
Problem
The oven lighting
switches off after a short
time.
The top oven lighting
does not switch on.
Possible cause and remedy
The oven lighting is set to switch off after 15 seconds
(default setting).
You can change the default setting for this (see
"Settings - Lighting").
The halogen lamp needs replacing.
Danger of burning.
Make sure the oven heating elements are switched
off and cool.
^ Disconnect the appliance from the mains.
^ Turn the lamp cover a quarter turn anti-clockwise to
release it and then pull it together with its seal
downwards to take it out.
^ Replace it with a new halogen lamp
(Osram 66725 AM/A, 230 V, 25 W, G9).
^ Refit the lamp cover together with its seal and turn
clockwise to secure.
^ Reconnect the oven to the electricity supply.
130
Problem solving guide
Problem
The side oven lighting
does not switch on.
Possible cause and remedy
The halogen lamp needs replacing.
Danger of burning.
Make sure the oven heating elements are switched
off and cool.
^ Disconnect the appliance from the mains.
^ Remove the side runners.
^ Use the lever to release the lamp cover from its frame.
^ Replace it with a new halogen lamp
(Osram 66725 AM/A, 230 V, 25 W, G9).
^ Press the lamp cover back into its retainer and refit
the side runners.
^ Reconnect the oven to the electricity supply.
131
After Sales / Guarantee
After sales service
Guarantee: U.K.
In the event of any faults which you
cannot easily remedy yourself or if the
appliance is under guarantee, please
contact
In the U.K, the appliance is guaranteed
for 2 years from the date of purchase.
– your Miele Dealer
or
– the Miele Service Department
See end of this booklet for contact
details.
When contacting contacting your
Dealer or Miele, please quote the model and serial number of your
appliance.
This information is given on the data
plate, visible on the front frame of the
oven, with the door fully open.
Please note that telephone calls may
be monitored and recorded for
training purposes.
N.B. A call-out charge will be applied to
service visits where the problem could
have been resolved as described in
these instructions.
132
However, you must activate your cover
by calling 0330 160 6640 or registering
online at www.miele.co.uk.
Guarantee: Other countries
For information on the appliance
guarantee specific to your country
please contact Miele. See end of this
booklet for contact details.
Electrical connection
,Danger of injury.
All electrical work should be
undertaken by a suitably qualified
and competent person.
Installation, repairs and other work
by unqualified persons could be
dangerous. Miele cannot be held
liable for unauthorised work.
Ensure power is not supplied to the
appliance until after installation or
repair work has been carried out.
Connection of this appliance to the
electricity supply must be made in
accordance with current safety
regulations (BS 7671 in the UK).
Connection of this appliance should be
made via a fused connection unit or a
suitable isolator and the on/off switch
should be easily accessible after the
appliance has been built in.
If the switch is not accessible after
installation (depending on country) an
additional means of disconnection must
be provided for all poles.
When switched off there must be an
all-pole contact gap of 3 mm in the
isolator switch (including switch, fuses
and relays according to EN 60335).
Connection data
The required connection data are given
on the data plate located on the oven
trim visible when the door is open.
Ensure that these match the mains
supply.
When contacting Miele, please quote
the following:
– Model number
– Serial number
– Connection data
(voltage/frequency/maximum
connected load)
When replacing the cable supplied
with another cable or changing the
connection, only cable type
H05VV-F with a suitable
cross-sectional area (CSA) may be
used (available from Miele Spare
Parts).
Oven
This oven is supplied with an approx.
1.7 m long 3-core cable for connection
to a 230 V, 50 Hz supply.
The wires in the mains lead are
coloured as follows:
Green/yellow = earth;
Blue = neutral;
Brown = live
WARNING, THIS APPLIANCE MUST
BE EARTHED
For extra safety it is advisable to protect
the appliance with a suitable residual
current device (RCD).
Maximum connected load: see data
plate.
133
Building-in diagrams
Appliance and niche dimensions
Dimensions are given in mm.
Installation in a base unit
* Ovens with glass front
** Ovens with metal front
134
Building-in diagrams
Installation in a tall unit
* Ovens with glass front
** Ovens with metal front
135
Building-in diagrams
Front dimensions
Dimensions are given in mm.
A H65xx: 45 mm
H66xx: 42 mm
B Ovens with glass front: 2.2 mm
Ovens with metal front: 1.2 mm
136
Installing the oven
,The oven must not be operated
until it has been correctly installed in
its housing unit.
In order to function correctly, the
oven requires an adequate supply
of cool air.
Ensure that the supply of cool air is
not impaired:
– do not fit a back panel in the
housing unit.
– the unit shelf on which
the oven sits must not
touch the wall behind it.
– do not fit insulation
to the side walls of the housing unit.
Please also ensure that the cool air
supply is not unduly heated by other
heat sources such as a wood
burning stove.
Lifting the oven by the door handle
can damage the door. Use the
handle recesses on the side of the
casing.
It is advisable to dismantle the door
before installing the appliance (see
"Cleaning and Care - Dismantling the
door") and remove accessories from
the oven cavity. This will make it easier
to install in its niche and you will not be
tempted into using the handle to carry
it.
^ Push the oven into the housing unit
and align it.
^ Open the door (if you have not
removed it previously).
Before installation
^ Before connecting the appliance to
the mains, you must disconnect the
power supply to the isolator switch.
Building in
^ Connect the mains cable from the
oven to the isolator.
^ Use the screws supplied to secure
the oven to the side walls of the
housing unit through the holes in the
oven trim.
^ Refit the door, if necessary (see
"Cleaning and care - Refitting the
door").
137
Miele|home
a Miele|home communication enabled appliance
b Miele|home communication module XKM3000Z
c Miele|home communication enabled Master appliance with SuperVision
functionality
d Miele|home Gateway XGW3000
e WiFi router
f Connection to a Home automation system
g Smartphone, Tablet PC, Laptop
h Internet connection
138
Miele|home
This appliance a/c is communication
enabled and can be connected to the
Miele|home system via a
communication module b (optional
accessory) and a conversion kit where
required.
The Miele|home system enables
communication enabled appliances to
send information via the household
wiring network to a master appliance c
such as an oven with SuperVision
function about their operational status,
as well as information about the
progress of the programme.
Displaying information and
controlling appliances
– SuperVision master appliance c
The status of other signed on
appliances can be shown in the
display of some communication
enabled appliances.
– Mobile appliance g
A PC, Notebook, Tablet PC or a
Smartphone can be used within the
reception area of a household WLAN
e to display status information about
signed on appliances and carry out
certain functions.
– Household network f
The Miele|home system enables
smart living. The Miele|home
Gateway d allows other
communication enabled appliances
to integrate into the household bus
system.
instead of the Miele|home Gateway
(www.qivicon.de).
SmartStart
Smart grid enabled appliances can be
started automatically at a time when
electricity costs are favourable or when
a sufficient supply of electricity is
available (e.g. from a solar power
system).
Accessories required
– Communication module XKM3000Z
– Conversion kit for communication
system XKV (depending on
household appliance)
– Miele|home Gateway XGW3000
These accessories are supplied with
their own installation and operating
instructions.
Further information
Further information regarding
Miele|home is available on the internet
and in the instruction manuals of the
various components, e.g. the
Miele|home Gateway. Please note that
the Miele@home and SuperVision
system is currently only available in
selected countries.
In Germany communication enabled
appliances can be integrated into
the QIVICON Smart Home Platform
139
Note for test institutes
Test food acc. to EN 60350
Oven
function
6
[°C]
U
140 2)
2
30–40
No
U
140 2)
1+3
30–45
No
1 tray
V
160 2)
2
15–33
Yes
1 tray
U
150 2)
2
25–40
No
2 trays
U
150 2)
2+4
25–40
Yes
V
160 2) 6)
3
20–30
Yes
U
180 2)
2
22–30
No
Yes
Test food
Tray / tin
Drop cookies
(8.4.1)
1 tray
Small cakes
(8.4.2)
2 trays
1)
1 tray
3)
‡
+
[min]
Pre-hea
t
Whisked
sponge cake
(8.5.1)
Springform C 26 cm
Springform C 26 cm 3)4)
V
150–180 2) 6)
2
20–45
Apple pie
(8.5.2)
Springform C 20 cm 3)
U
160 2)
2
85–105
No
3)
V
180 2) 5)
1
80–95
No
Toast (9.1)
Rack
Y
300
3
5–10
No
Grill beef
burgers
(9.2)
Rack on top of universal
tray
Y
300
4
1st side:
8–13
2nd side:
6–11
Yes, 5
minutes
Springform C 20 cm
U Fan plus / V Conventional heat / Y Full grill
6 Temperature / ‡ Shelf level / + Duration
1) Take the baking trays out of the oven early if the food is sufficiently browned before the specified
duration has elapsed.
2) Switch off Rapid heat-up during the heating-up phase. To do this select "Change – Heating-up
phase – Normal".
3) Place baking tins on the rack.
4) In general, if a range of temperatures is given, it is best to select the lower temperature and to
check the food after the shortest time.
5) Select a function and a temperature and then select "Change – Crisp function – On".
6) Switch the catalyser off (see "Settings – Catalyser").
140
Note for test institutes
Energy efficiency class
The energy efficiency class is calculated in accordance with EN 50304/EN 60350.
Energy efficiency class: A+
Please observe the following advice when testing:
– Use the Gentle bake K programme for testing purposes.
– Set the oven lighting to "On for 15 seconds" (see "Settings").
– Switch the catalyser off (see "Settings").
– During testing make sure that only those accessories required for the test are in
the oven cavity.
Do not use other accessories that might be available, such as FlexiClip runners
or catalytic enamelled panels such as side panels or roof liners.
– When calculating the Energy efficiency class it is important to keep the oven
door firmly closed.
Depending on test instruments used, the door seal function can be affected to
a greater or lesser degree. This can have a negative influence on test results.
This can be compensated for by pressing on the door. Where necessary
suitable technical measures can be used to assist. The door seal is not affected
in normal everyday use.
Product data sheets
The data sheets apply to ovens described in this operating instruction manual.
141
Data sheet for domestic ovens
In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
66/2014
MIELE
Model name / identifier
H 6560 BP
Energy efficiency index/cavity (EEIcavity)
81,9
Energy efficiency class/cavity
A+++ (most efficient) to D (least efficient)
A+
Energy consumption per cycle for each cavity in conventional mode
1,10 kWh
Energy consumption per cycle for each cavity in fan-forced convection 0,71 kWh
mode
Number of cavities
1
Heat source(s) per cavity
Elektro
Volume of cavity
76 l
Mass of the appliance
47 kg
Data sheet for domestic ovens
In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
66/2014
MIELE
Model name / identifier
H 6660 BP
Energy efficiency index/cavity (EEIcavity)
81,9
Energy efficiency class/cavity
A+++ (most efficient) to D (least efficient)
A+
Energy consumption per cycle for each cavity in conventional mode
1,10 kWh
Energy consumption per cycle for each cavity in fan-forced convection 0,71 kWh
mode
Number of cavities
1
Heat source(s) per cavity
Elektro
Volume of cavity
76 l
Mass of the appliance
47 kg
144
145
146
United Kingdom
Miele Co. Ltd.
Fairacres, Marcham Road
Abingdon, Oxon, OX14 1TW
Customer Contact Centre Tel: 0330 160 6600
E-mail: mielecare@miele.co.uk
Internet: www.miele.co.uk
Australia
Miele Australia Pty. Ltd.
ACN 005 635 398
ABN 96 005 635 398
1 Gilbert Park Drive, Knoxfield, VIC 3180
Tel: 1300 464 353
Internet: www.miele.com.au
China
Miele (Shanghai) Trading Ltd.
1-3 Floor, No. 82 Shi Men Yi Road
Jing' an District
200040 Shanghai, PRC
Tel: +86 21 6157 3500, Fax: +86 21 6157 3511
E-mail: info@miele.cn, Internet: www.miele.cn
Miele (Hong Kong) Limited
41/F - 4101, Manhattan Place
23 Wang Tai Road
Kowloon Bay, Hong Kong
Tel: (852) 2610 1331, Fax: (852)2610 1013
Email: mielehk@miele.com.hk
India
Miele India Pvt. Ltd.
Ground Floor, Copia Corporate Suites
Plot No. 9, Jasola
New Delhi - 110025
Tel: 011-46 900 000, Fax: 011-46 900 001
E-mail: customercare@miele.in, Internet: www.miele.in
Ireland
Miele Ireland Ltd.
2024 Bianconi Avenue
Citywest Business Campus, Dublin 24
Tel: (01) 461 07 10, Fax: (01) 461 07 97
E-Mail: info@miele.ie, Internet: www.miele.ie
Manufacturer: Miele & Cie. KG
Carl-Miele-Straße 29, 33332 Gütersloh, Germany
Malaysia
Miele Sdn Bhd
Suite 12-2, Level 12
Menara Sapura Kencana Petroleum
Solaris Dutamas No. 1, Jalan Dutamas 1
50480 Kuala Lumpur, Malaysia
Phone: +603-6209-0288
Fax: +603-6205-3768
New Zealand
Miele New Zealand Limited
IRD 98 463 631
Level 2, 10 College Hill
Freemans Bay, Auckland 1011, NZ
Tel: 0800 464 353
Internet: www.miele.co.nz
Singapore
Miele Pte. Ltd.
163 Penang Road
# 04 - 03 Winsland House II
Singapore 238463
Tel: +65 6735 1191, Fax: +65 6735 1161
E-Mail: info@miele.com.sg
Internet: www.miele.sg
South Africa
Miele (Pty) Ltd
63 Peter Place, Bryanston 2194
P.O. Box 69434, Bryanston 2021
Tel: (011) 875 9000, Fax: (011) 875 9035
E-mail: info@miele.co.za
Internet: www.miele.co.za
United Arab Emirates
Miele Appliances Ltd.
P.O. Box 11 47 82
Gold & Diamond Park, Sheikh Zayed Road
Building 6 / Offices Nos. 6-214 to 6-220
Dubai
Tel: +971-4-341 84 44
Fax: +971-4-341 88 52
E-Mail: info@miele.ae
Internet: www.miele.ae
147
H6560BP; H6660BP
en - GB
M.-Nr. 10 112 380 / 00