MODEL
MODELO
MALLI
MODEL
HOME CINEMA SOUNDBAR SYSTEM
SYSTÈM BARRE DE SON HOME CINÉMA
SISTEMA BARRA DE SONIDO HOME CINEMA
SOUNDBAR-HEMMABIOSYSTEM
SISTEMA HOME THEATER PER SOUND BAR
SOUND BAR HOME THEATER-SYSTEEM
CINEMA EM CASA COM BARRA DE SOM
SOUND BAR -KOTITEATTERIJÄRJESTELMÄ
SOUND BAR HOME THEATER SYSTEM
MODELL
MODÈLE
MODELO
MODELL
MODELLO
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUAL DE MANEJO
BRUKSANVISNING
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE OPERAÇÃO
KÄYTTÖOHJE
OPERATION MANUAL
HT-SB60
3D
AUDIO
TREBLE
BASS
DEUTSCH
FRANÇAIS
ESPAÑOL
SVENSKA
ITALIANO
NEDERLANDS
PORTUGUÊS
SUOMI
ENGLISH
2012 July 16
HT-SB60_Front.fm
Siehe Seiten i bis viii und D-1 bis D-14.
Se reporter aux pages i à viii et F-1 à F-14.
Consulte las páginas i a viii y S-1 a S-14.
Hänvisa till sidorna i till viii och V-1 till V-14.
Leggere le pagine i a viii e I-1 a I-14.
Raadpleeg de bladzijden i t/m viii en N-1 t/m N-14.
Favor consultar as páginas i a viii e P-1 a P-14.
Sivut i - viii sekä SU-1 - SU-14.
Please refer to pages i to viii and E-1 to E-14.
BESONDERE ANMERKUNGEN
REMARQUES SPÉCIALES
NOTAS ESPECIALES
SÄRSKILDA ANMÄRKNINGAR
NOTE PARTICOLARI
BIJZONDERE OPMERKINGEN
NOTAS ESPECIAIS
ERITYISHUOMAUTUS
SPECIAL NOTES
● Hiermit erklärt SHARP Electronics (Europe) GmbH,
● Hierbij verklaart SHARP Electronics (Europe) GmbH
dass sich das Gerät SHARP Home Cinema
Soundbar System HT-SB60 in Übereinstimmung mit
den grundlegenden Anforderungen und den übrigen
einschlägigen Bestimmungen der Richtlinie 1999/5/
EG befindet. Die Konformitätserklärung kann unter
folgender Adresse gefunden werden:
http://www.sharp.de/doc/HT-SB60.pdf
Für die Verwendung in Europa.
Par la présente, SHARP Electronics (Europe) GmbH
déclare que l’appareil SHARP Système Barre de Son
Home Cinéma
HT-SB60
est conforme aux
exigences essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE. La déclaration
de conformité peut être consultée sur le site:
http://www.sharp.de/doc/HT-SB60.pdf
Compatible avec une utilisation en Europe.
Por la presente, SHARP Electronics (Europe) GmbH,
declara que este SHARP Sistema Barra de Sonido
Home Cinema HT-SB60 cumple con los requisitos
esenciales y otras exigencias relevantes de la
Directiva 1999/5/EC Pueden consultar la declaración
de conformidad en:
http://www.sharp.de/doc/HT-SB60.pdf
Para su uso en Europa.
Härmed intygar SHARP Electronics (Europe) GmbH
att denna SHARP Soundbar-hemmabiosystem HTSB60 står I överensstämmelse rned de väsentliga
egenskapskrav och övriga relevanta bestämmelser
som framgår av direktiv 1999/5/EG. Deklaration om
överenstämmelse är tillgänlig på web addressen:
http://www.sharp.de/doc/HT-SB60.pdf
För användning i Europa.
Con la presente SHARP Electronics (Europe) GmbH
dichiara che questo SHARP Sistema Home Theater
per Sound Bar HT-SB60 è con-forme ai requisiti
essenziali ed alle altre disposizioni pertinenti stabilite
dalla direttiva 1999/5/CE. La dichiarazione di
conformità può essere consultata sul sito:
http://www.sharp.de/doc/HT-SB60.pdf
Dichiarazione di conformità
La società SHARP Electronics (Europe) GmbH
dichiara che il prodotto SHARP Sistema Home
Theater per Sound Bar HT-SB60 è costruito in
conformità alle prescrizioni del D.M.no 548 del 28/8/
95, pubblicato sulla G.U.no 301 del 28/12/95 ed in
particolare è conforme a quanto indicato nell’art. 2,
comma 1 dello stesso decreto.
Solo per l’Europa.
dat het toestel SHARP Sound Bar Home Theatersysteem HT-SB60 in overeenstemming is met de
essentiële eisen en de andere relevante bepalingen
van
richtlijn
1999/5/EG.
De
overeenstemmingsverkiaring is beschikbaar op:
http://www.sharp.de/doc/HT-SB60.pdf
Voor gebruik in Europa.
Eu, SHARP Electronics (Europe) GmbH, declaro
que o SHARP Cinema em Casa com Barra de Som
HT-SB60 cumpre os requisitos essenciais e outras
provisões relevantes da Directiva 1999/5/EC. A
Declaração de conformidade pod ser consultada
em:
http://www.sharp.de/doc/HT-SB60.pdf
Para uso na Europa.
SHARP Electronics (Europe) GmbH vakuuttaa täten että
SHARP Sound Bar -Kotiteatterijärjestelmä HT-SB60
tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien direktiivin muiden ehtojen
mukainen. Vakuutus on nähtävissä osoitteessa:
http://www.sharp.de/doc/HT-SB60.pdf
Käytettäväksi Euroopassa.
Hereby, SHARP Electronics (Europe) GmbH
declares that this SHARP Sound Bar Home Theater
System HT-SB60 is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC. The declaration of conformity
may be consulted at: http://www.sharp.de/doc/HTSB60.pdf
For use in Europe.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
i
HT-SB60 new_com.fm
2012 July17
● Bei Einstellung der ON/STAND-BY-Taste auf STAND-BY ist die
● Wanneer de ON/STAND-BY toets in de STAND-BY stand staat,
Netzspannung immer noch im Gerät vorhanden.
Wenn die ON/STAND-BY-Taste auf STAND-BY eingestellt wird,
kann das Gerät unter Verwendung der Timer-Betriebsart oder
Fernbedienung in Betrieb gesetzt werden.
Warnung:
In diesem Gerät sind keine vom Benutzer wartbaren Teile
vorhanden. Niemals Abdeckungen entfernen, außer wenn Sie
dafür qualifiziert sind. In diesem Gerät sind gefährliche
Spannungen vorhanden. Vor Ausführung von irgendwelchen
Kundendienstarbeiten oder bei längerer Nichtverwendung des
Gerätes stets den Netzstecker aus der Netzsteckdose ziehen.
● Quando o botão ON/STAND-BY estiver ajustado na posição
loopt er nog steeds stroom (netspanning) in het toestel.
Wanneer de ON/STAND-BY toets in de STAND-BY stand staat,
kan het toestel ingeschakeld worden via de timerfunctie of de
afstandsbediening.
Waarschuwing:
Dit toestel bevat geen door de gebruiker te repareren onderdelen.
Verwijder de behuizing nooit tenzij u deskundig bent op dit gebied.
In het toestel loopt een gevaarlijke spanning; haal de stekker altijd
uit het stopcontact alvorens onderhoud uit te voeren of wanneer het
toestel voor langere tijd niet gebruikt wordt.
STAND-BY, a voltagem de alimentação ainda se encontra
presente dentro do aparelho.
Quando o botão ON/STAND-BY estiver ajustado na posição
STAND-BY, o aparelho pode ser colocado em operação através do
modo de programação horária ou pelo controle remoto.
Advertência:
Neste aparelho não há partes que podem ser consertadas pelo
usuário. Nunca retire a tampa, a menos que você tenha
qualificação para tal. Este aparelho contém voltagens perigosas.
Remova sempre o cabo de alimentação da tomada antes de
efetuar qualquer conserto ou quando deixar o aparelho muito
tempo fora de uso.
● Lorsque la touche ON/STAND-BY est mise en STAND-BY,
l’appareil est toujours sous tension.
Lorsque la touche ON/STAND-BY se trouve sur la position STANDBY, l’appareil est prêt à fonctionner par la minuterie ou la
télécommande.
Avertissement:
Cet appareil contient des pièces non réparables par l’utilisateur.
Personne non qualifiée n’enlèvera jamais les couvercles. L’appareil
contenant des organes portés à haute tension, débrancher
l’appareil avant toute réparation ou en période de non-utilisation.
● Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, todavía hay tensión dentro del aparato.
Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, el aparato puede ponerse en funcionamiento
utilizando el modo del temporizador o el controlador remoto.
Advertencia:
Tenga en cuenta que dentro de este aparato no hay piezas que
pueda reparar. No quite nunca las tapas a menos que se esté
cualificado para hacerlo. Este aparato tiene en su interior tensiones
peligrosas. Desenchufe siempre la clavija de la red del
tomacorriente antes de realizar cusalquier servicio de
mantenimiento y cuando no se use el aparato durante un largo
período de tiempo.
● Kun ON/STAND-BY -kytkin on STAND-BY-asennossa, laitteessa
on yhä virta.
Kun ON/STAND-BY -kytkin on STAND-BY-asennossa, laite
voidaan kytkeä päälle kaukosäätimestä.
Varoitus:
Laitteen sisällä ei ole käyttäjän huollettavissa olevia osia. Kotelon
saa irrottaa vain siihen pätevöitynyt henkilö. Laitteen sisällä on
vaarallinen jännite. Laite on aina irrotettava verkkovirrasta ennen
huoltotoimenpiteitä ja jos laite on pitkään käyttämättä.
● When the ON/STAND-BY button is set at STAND-BY position,
mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY position, the
unit may be brought into operation by the timer mode or remote
control.
Warning:
This unit contains no user serviceable parts. Never remove covers
unless qualified to do so. This unit contains dangerous voltages,
always remove mains plug from the socket before any service
operation and when not in use for a long period.
● När ON/STAND-BY knappen är i läge STAND-BY, finns
nätspänning i apparaten.
Med ON/STAND-BY knappen i läge STAND-BY kan apparaten
startas med timerfunktion eller fjärrkontrollen.
Varning:
Apparaten innehåller inga delar som kan åtgärdas av kunden.
Höljet får endast öppnas av kvalificerad personal. Apparaten
innehåller farliga spänningar. Stickkontakten ska därför dras ut från
nätuttaget före reparationsarbeten och bör dras ut om apparaten
inte ska användas på mycket länge.
● Når ON/STAND-BY-knappen er sat i STAND-BY positionen, er der
stadig netspaending til stede i apparatet.
Når ON/STAND-BY-knappen er sat i STAND-BY position, kan
apparatet startes v.hj.a. timer-funksionen eller fjernbetjeningen.
Advarsel:
Apparatet indeholder ingen dele, der kan repareres af brugeren
selv. Fjern aldrig kabinettet med mindre De er kvalificeret hertil.
Apparatet indeholder farlig strømspaending. Traek altid stikket ud
af stikkontakten før der foretages reparationer, eller hvis apparatet
ikke er i brug i laengere tid.
● Quando il tasto ON/STAND-BY si trova in posizione STAND-BY,
all’interno dell’apparecchio c’è ancora la corrente.
Se il tasto ON/STAND-BY si trova nella posizione STAND-BY,
l’unità può essere accesa con il modo timer o con il telecomando.
Avvertenza:
L’apparecchio non contiene parti riparabili dall’utente. Non togliere
mai i coperchi, a meno di non essere qualificati per farlo. All’interno
dell’apparecchio ci sono tensioni pericolose, per cui si deve sempre
staccare la spina del cavo d’alimentazione dalla presa di corrente
prima di qualsiasi intervento di manutenzione e quando non si usa
l’apparecchio per un lungo periodo di tempo.
ii
HT-SB60 new_com.fm
2012 July31
● Advarsel:
Til at forbygge ild og stød risiko, lad vaere med at undsaette
denne indretning for drypning eller overstaenkning. Der må
ikke anbringes nogen genstande fyldt med vand, som for
eksempel vaser, på dette apparat.
● Advarsel:
For å unngå brann eller kortslutning, utsett ikke produktet
for vann eller fuktighet. Gjenstander som inneholder
vaeske, feks. en blomstervase, må ikke plasseres oppå
apparatet.
DENNA APPARAT
APPARAT ÄR
ÄR ANSLUTEN
ANSLUTEN TILL
TILL 230
230 VV
VÄXELSTRÖM
VÄXELSTRÖM NÄR
NÄR STICKPROPPEN
STICKPROPPEN ÄR
ÄR
INSKJUTEN II VÄGGUTTAGET.
VÄGGUTTAGET. FÖR
FÖR ATT
ATT
FULLSTÄNDIGT
FULLSTÄNDIGT KOPPLA
KOPPLA IFRÅN
IFRÅN APPARATEN,
APPARATEN,
V.G. DRAG UT STICKPROPPEN.
STICKPROPPEN.
● Varoitus:
Älä vie laitetta sateeseen tai kosteisiin tiloihin. Jos laite on
kostunut, anna sen kuivua ennen kuin käytät sitä
verkkovirralla. Nestettä sisältäviä astioita kuten esim.
kukkamaljakoita ei saa asettaa laitteen päälle.
● Vorsicht:
●
●
●
●
●
●
●
●
Das Gerät weder Tropf- noch Spritzwasser aussetzen.
Ansonsten besteht die Gefahr eines Brandes oder
elektrischen Schlages. Es dürfen keine mit Flüssigkeiten
gefüllten Gegenstände wie Vasen auf dem Gerät
abgestellt werden.
Attention:
Pour éviter un incendie ou une secousse électrique,
mettre l’appareil à l’abri de l’eau (éclaboussure, goutte).
Ne pas poser sur l’appareil un récipient contenant du
liquide.
Advertencia:
Para evitar incendios y descargas eléctricas, no
exponga el aparato a goteo o salpicadura de líquidos.
No deberán ponerse encima del aparato objetos que
estén llenos de líquido, como por ejemplo un florero.
Varning:
Utsätt inte enheten för dropp eller stänk för att förhindra
brand eller elektriska stötar. Inga vätskefyllda föremål
såsom vaser får placeras på enheten.
Attenzione:
Per prevenire incendi o scosse elettriche, non fare
gocciolare nessun liquido sull’apparecchio e non
bagnarlo. Non collocarvi sopra nessun oggetto riempito
d’acqua, come per esempio vasi.
Waarschuwing:
Stel het toestel niet bloot aan druipend of spattend water
om brand en elektrische schokken te voorkomen. Met
vloeistoffen gevulde voorwerpen, zoals vazen, mogen
niet op het toestel geplaatst worden.
Cuidado:
Para evitar incêndio ou choque elétrico, não exponha
este aparelho a gotejamento ou salpicamento de água.
Não coloque objetos com água como, por exemplo, um
vaso de flores, em cima do aparelho.
Varoitus:
Tulipalon tai sähköiskun välttämiseksi laitetta ei saa
altistaa tippuvalle tai roiskuvalle vedelle. Nestettä
sisältäviä astioita kuten esim kukkamaljakoita ei saa
asettaa laitteen päälle.
Warning:
To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled with
liquids, such as vases, shall be placed on the apparatus.
Hergestellt unter Lizenz von U.S.Patentnr.:
5.956.674; 5.974.380; 6.487.535 & anderen U.S. und
weltweiten Patenten ausgestellt & angemeldet. DTS,
das Symbol, & DTS und das Symbol zusammen sind
eingetragene Warenzeichen & DTS Digital Surround und
die DTS-Logos sind Warenzeichen von DTS, Inc.
Produkt enthält Software .
© DTS, Inc. Alle Rechte vorbehalten.
Fabriqué sous licence relevant du brevet des É.U.
numéro :
5 956 674 ; 5 974 380 ; 6 487 535 et autres brevets
américains et internationaux délivrés et en attente. DTS,
et le Symbole sont des marques déposées et DTS Digital
Surround et les logos DTS sont des marques de
commerce de DTS, Inc. Le produitinclut le logiciel.
© DTS, Inc. Tous droits réservés.
Fabricado bajo licencia bajo la Patente de EE.UU. nº.
5.956.674; 5.974.380; 6.487.535 y otras patentes
mundiales y de los EE.UU. emitidas y próximamente en
vigor. DTS, the Symbol, & DTS and the Symbol together
are registered trademarks & DTS Digital Surround and
the DTS logos are trademarks of DTS, Inc. Product
includes software.
© DTS, Inc. Todos los derechos reservados.
Tillverkad på licens under följande patentnummer i USA:
5 956 674; 5 974 380; 6 487 535 & andra USA-patent och
globala patent som är registrerade eller patentsökta.
DTS, symbolen, & DTS och symbolen tillsammans är
registrerade varumärken, & DTS Digital Surround och
DTS-logotyperna är varumärken som tillhör DTS, Inc.
Produkten innehåller programvara.
© DTS, Inc. Med ensamrätt.
Prodotti su licenza ai sensi del brevetto statunitense n.
5.956.674;
5.974.380;
6.487.535
e
altribrevettistatunitensi e mondialiemessi e in attesa di
emissione. DTS, il simbolo e DTS unito al simbolo sono
marchi di fabbrica registrati. I loghi di DTS e di DTS
Digital Surround sono marchi di fabbrica di DTS, Inc. Il
prodotto include il software.
© DTS, Inc. Tutti iIdirittiriservati.
iii
HT-SB60 new_com.fm
2012 July17
Vervaardigd onder licentie volgens VS. Octrooinrs:
5.956.674; 5.974.380; 6.487.535 & andere octrooien in
de VS en mondiaal geldende octrooien die zijn verleend
& aangevraagd. DTS, het Symbool, & DTS en het
Symbool samen zijn gedeponeerde handelsmerken &
DTS Digital Surround en de DTS-logo's zijn
handelsmerken van DTS, Inc. Product omvat software.
© DTS, Inc. Alle Rechten Voorbehouden
HDMI, das HDMI-Logo und High-Definition Multimedia
Interface sind Marken oder eingetragene Marken von
HDMI Licensing LLC in den USA und in anderen
Ländern.
HDMI, le logo HDMI et High-Definition Multimedia
Interface sont des marques commerciales ou des
marques déposées de HDMI Licensing LLC aux ÉtatsUnis et dans d’autres pays.
Fabricado soblicençaao abrigo da Patente americana
n.º: 5.956.674; 5.974.380; 6.487.535 e outras patentes
americanas e mundiais emitidas e pendentes. TS, o
símbolo e DTS e o Símbolo em conjunto são marcas
comerciaisregistadas e DTS Digital Surround e os
logótipos DTS são marcas comerciaisregistadas da
DTS, Inc. O produtoinclui software.
© DTS, Inc. Todos os direitos reservados.
HDMI, el logotipo de HDMI y High-Definition Multimedia
Interface son marcas comerciales o marcas comerciales
registradas de HDMI Licensing LLC en Estados Unidos
y otros países.
HDMI, HDMI-logotypen och High-Definition Multimedia
Interface är varumärken eller registrerade varumärken
som tillhör HDMI Licensing LLC i USA och andra länder.
Laite on seuraavilla USA:n patenteilla suojattu:
5 956 674; 5 974 380; 6 487 535 sekä muut myönnetyt ja
haetut USA:n ja maailmanlaajuiset patentit.
DTS, sen symboli sekä DTS ja symboli yhdessä ovat
rekisteröityjä tavaramerkkejä. DTS Digital Surround ja
DTS-logot ovat DTS, Inc.:in tavaramerkkejä. Tuote
sisältää ohjelmiston.
© Dts, Inc. Kaikki oikeudet pidätetään.
HDMI, il logo HDMI e High-Definition Multimedia
Interface sono marchi di proprietà o marchi registrati di
HDMI Licensing LLC negli Stati Uniti e in altri paesi.
HDMI, het HDMI-logo en de High-Definition Multimedia
Interface zijn handelsmerken of geregistreerde
handelsmerken van HDMI Licensing LLC in de VS of
andere landen.
Manufactured under license under U.S. Patent Nos:
5,956,674; 5,974,380; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS, the Symbol,
& DTS and the Symbol together are registered
trademarks & DTS Digital Surround and the DTS logos
are trademarks of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
HDMI, o logótipo HDMI e High-Definition Multimedia
Interface são marcas comerciais ou marcas comerciais
registadas da HDMI Licensing LLC nos Estados Unidos
da América e em outros países.
HDMI, HDMI-logo ja High-Definition Multimedia Interface
ovat HDMI Licensing LLC:n tavaramerkkejä tai
rekisteröityjä tavaramerkkejä Yhdysvalloissa ja muissa
maissa.
Hergestellt und in Lizenz von Dolby Laboratories. Dolby und
das Doppel-D-Symbol sindWarenzeichen der Dolby
Laboratories.
HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
Fabriqué sous licence de Dolby Laboratories. Dolby et le
symbole du double D sont des marques de commerce de
Dolby Laboratories.
Fabricado bajo licencia de DolbyLaboratories. Dolby y el
símbolo Doble D son marcas comerciales de Dolby
Laboratorios.
Tillverkad under licensfrån Dolby Laboratories. Dolby
ochdubbel-D-symbolenärvarumärkentillhörande
Dolby
Laboratories.
Prodotti su licenza di DolbyLaboratories. Dolby e il simbolo
doppia D sono marchi di Dolby Laboratories.
Vervaardigdonderlicentie van Dolby Laboratories. Dolby en
het symbool met de dubbele D zijnhandelsmerken van Dolby
Laboratories.
Fabricado soblicença dos DolbyLaboratories. Dolby e o
símbolo D duplo são marcas comerciais da
DolbyLaboratories.
Valmistettu Dolby Laboratoriesinlisenssillä. Dolby jakaksoisD-symboliovat Dolby Laboratoriesintuotemerkkejä.
Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby
Laboratories.
iv
HT-SB60 new_com.fm
2012 July17
Entsorgungsinformationen
Información sobre la eliminación
A. Entsorgungsinformationen für Benutzer aus Privathaushalten
1. In der Europäischen Union
Achtung: Ihr
Produkt trägt
dieses Symbol.
Es besagt,
dass Elektround
Elektronikgeräte nicht mit
dem
Haushaltsmüll
entsorgt,
sondern einem
getrennten
Rücknahmesystem
zugeführt
werden sollten.
A. Información sobre eliminación para usuarios particulares
1. En la Unión Europea
Achtung: Werfen Sie dieses Gerät zur Entsorgung bitte nicht in den
normalen Hausmüll!
Gemäß einer neuen EU-Richtlinie, die die ordnungsgemäße Rücknahme,
Behandlung und Verwertung von gebrauchten Elektro- und
Elektronikgeräten vorschreibt, müssen elektrische und elektronische
Altgeräte getrennt entsorgt werden.
Nach der Einführung der Richtlinie in den EU-Mitgliedstaaten können
Privathaushalte ihre gebrauchten Elektro- und Elektronikgeräte nun
kostenlos an ausgewiesenen Rücknahmestellen abgeben*.
In einigen Ländern* können Sie Altgeräte u.U. auch kostenlos bei Ihrem
Fachhändler abgeben, wenn Sie ein vergleichbares neues Gerät kaufen.
*) Weitere Einzelheiten erhalten Sie von Ihrer Gemeindeverwaltung.
Wenn Ihre gebrauchten Elektro- und Elektronikgeräte Batterien oder Akkus
enthalten, sollten diese vorher entnommen und gemäß örtlich geltenden
Regelungen getrennt entsorgt werden.
Durch die ordnungsgemäße Entsorgung tragen Sie dazu bei, dass
Altgeräte angemessen gesammelt, behandelt und verwertet werden. Dies
verhindert mögliche schädliche Auswirkungen auf Umwelt und Gesundheit
durch eine unsachgemäße Entsorgung.
2. In anderen Ländern außerhalb der EU
Bitte erkundigen Sie sich bei Ihrer Gemeindeverwaltung nach dem
ordnungsgemäßen Verfahren zur Entsorgung dieses Geräts.
Für die Schweiz: Gebrauchte Elektro- und Elektronikgeräte können
kostenlos beim Händler abgegeben werden, auch wenn Sie kein neues
Produkt kaufen. Weitere Rücknahmesysteme finden Sie auf der
Homepage von www.swico.ch oder www.sens.ch.
B. Entsorgungsinformationen für gewerbliche Nutzer
1. In der Europäischen Union
Wenn Sie dieses Produkt für gewerbliche Zwecke genutzt haben und nun
entsorgen möchten:
Bitte wenden Sie sich an Ihren SHARP Fachhändler, der Sie über die
Rücknahme des Produkts informieren kann. Möglicherweise müssen Sie
die Kosten für die Rücknahme und Verwertung tragen. Kleine Produkte
(und kleine Mengen) können möglicherweise bei Ihrer örtlichen
Rücknahmestelle abgegeben werden.
Für Spanien: Bitte wenden Sie sich an das vorhandene
Rücknahmesystem oder Ihre Gemeindeverwaltung, wenn Sie Fragen zur
Rücknahme Ihrer Altgeräte haben.
2. In anderen Ländern außerhalb der EU
Bitte erkundigen Sie sich bei Ihrer Gemeindeverwaltung nach dem
ordnungsgemäßen Verfahren zur Entsorgung dieses Geräts.
Atención: si quiere desechar este equipo, ¡por favor no utilice el cubo de la
basura habitual!
Los equipos eléctricos y electrónicos usados deberían tratarse por separado de
acuerdo con la legislación que requiere un tratamiento, una recuperación y un
reciclaje adecuados de los equipos eléctricos y electrónicos usados.
Tras la puesta en práctica por parte de los estados miembros, los hogares de
particulares dentro de los estados de la Unión Europea pueden devolver sus
equipos eléctricos y electrónicos a los centros de recogida designados sin
Atención: su coste alguno *.
producto está En algunos países* es posible que también su vendedor local se lleve su viejo
marcado con producto sin coste alguno si Ud. compra uno nuevo similar.
*) Por favor, póngase en contacto con su autoridad local para obtener más
este símbolo.
detalles.
Significa que Si sus equipos eléctricos o electrónicos usados tienen pilas o acumuladores,
los productos por favor deséchelos por separado con antelación según los requisitos locales.
Al desechar este producto correctamente, ayudará a asegurar que los residuos
eléctricos y
reciban el tratamiento, la recuperación y el reciclaje necesarios, previniendo de
electrónicos
esta forma posibles efectos negativos en el medio ambiente y la salud humana
que de otra forma podrían producirse debido a una manipulación de residuos
usados no
inapropiada.
deberían
2. En otros países fuera de la Unión Europea
mezclarse con Si desea desechar este producto, por favor póngase en contacto con las
los residuos
autoridades locales y pregunte por el método de eliminación correcto.
Para Suiza: Los equipos eléctricos o electrónicos pueden devolverse al
domésticos
vendedor sin coste alguno, incluso si no compra ningún nuevo producto. Se
generales.
puede encontrar una lista de otros centros de recogida en la página principal de
Existe un
www.swico.ch o www.sens.ch.
sistema de
B. Información sobre Eliminación para empresas usuarias
1. En la Unión Europea
recogida
el producto se utiliza en una empresa y quiere desecharlo:
independiente Si
Por favor póngase en contacto con su distribuidor SHARP, quien le informará
para estos
sobre la recogida del producto. Puede ser que le cobren los costes de recogida
y reciclaje. Puede ser que los productos de tamaño pequeño (y las cantidades
productos.
pequeñas) sean recogidos por sus centros de recogida locales.
Para España: por favor, póngase en contacto con el sistema de recogida
establecido o con las autoridades locales para la recogida de los productos
usados.
2. En otros países fuera de la Unión Europea
Si desea desechar este producto, por favor póngase en contacto con sus
autoridades locales y pregunte por el método de eliminación correcto.
Information om återvinning
Informations sur la mise au rebut correcte
Attention :
votre produit
comporte ce
symbole. Il
signifie que les
produits
électriques et
électroniques
usagés ne
doivent pas
être mélangés
avec les
déchets
ménagers
généraux. Un
système de
collecte
séparé est
prévu pour ces
produits.
Information om återvinning av elektrisk utrustning för hushåll
EU-länder
OBS! Kasta inte denna produkt i soporna!
Förbrukad elektrisk utrustning måste hanteras i enlighet med gällande
miljölagstiftning och återvinningsföreskrifter.
I enlighet med gällande EU-regler ska hushåll ha möjlighet att lämna in
elektrisk utrustning till återvinningsstationer utan kostnad.*
I vissa länder* kan det även hända att man gratis kan lämna in gamla
produkter till återförsäljaren när man köper en ny liknande enhet.
*) Kontakta kommunen för vidare information.
Om utrustningen innehåller batterier eller ackumulatorer ska dessa
först avlägsnas och hanteras separat i enlighet med gällande
miljöföreskrifter.
Genom att hantera produkten i enlighet med dessa föreskrifter kommer
den att tas om hand och återvinnas på tillämpligt sätt, vilket förhindrar
potentiella negativa hälso- och miljöeffekter.
2. Länder utanför EU
Kontakta de lokala myndigheterna och ta reda på gällande sorteringsoch återvinningsföreskrifter om du behöver göra dig av med denna
produkt.
B. Information om återvinning för företag
1. EU-länder
Gör så här om produkten ska kasseras:
Kontakta SHARPs återförsäljare för information om hur man går till
väga för att lämna tillbaka produkten. Det kan hända att en avgift för
transport och återvinning tillkommer. Mindre skrymmande produkter
(om det rör sig om ett fåtal) kan eventuellt återlämnas till lokala
återvinningsstationer.
2. Länder utanför EU
Kontakta de lokala myndigheterna och ta reda på gällande sorteringsoch återvinningsföreskrifter om du behöver göra dig av med denna
produkt.
A.
1.
A. Informations sur la mise au rebut à l'intention des utilisateurs privés
(ménages)
1. Au sein de l'Union européenne
Attention : si vous souhaitez mettre cet appareil au rebut, ne le jetez pas dans
une poubelle ordinaire!
Les appareils électriques et électroniques usagés doivent être traités
séparément et conformément aux lois en vigueur en matière de traitement, de
récupération et de recyclage adéquats de ces appareils.
Suite à la mise en oeuvre de ces dispositions dans les Etats membres, les
ménages résidant au sein de l'Union européenne peuvent désormais ramener
gratuitement* leurs appareils électriques et électroniques usagés sur des sites
de collecte désignés.
Dans certains pays*, votre détaillant reprendra également gratuitement votre
ancien produit si vous achetez un produit neuf similaire.
*) Veuillez contacter votre administration locale pour plus de renseignements.
Si votre appareil électrique ou électronique usagé comporte des piles ou des
accumulateurs, veuillez les mettre séparément et préalablement au rebut
conformément à la législation locale en vigueur.
En veillant à la mise au rebut correcte de ce produit, vous contribuerez à assurer
le traitement, la récupération et le recyclage nécessaires de ces déchets, et
préviendrez ainsi les effets néfastes potentiels de leur mauvaise gestion sur
l'environnement et la santé humaine.
2. Pays hors de l'Union européenne
Si vous souhaitez mettre ce produit au rebut, veuillez contacter votre
administration locale qui vous renseignera sur la méthode d'élimination correcte
de cet appareil.
Suisse : les équipements électriques ou électroniques usagés peuvent être
ramenés gratuitement au détaillant, même si vous n'achetez pas un nouvel
appareil. Pour obtenir la liste des autres sites de collecte, veuillez vous reporter
à la page d'accueil du site www.swico.ch ou www.sens.ch.
B. Informations sur la mise au rebut à l'intention des entreprises
1. Au sein de l'Union européenne
Si ce produit est utilisé dans le cadre des activités de votre entreprise et que
vous souhaitiez le mettre au rebut:
Veuillez contacter votre revendeur SHARP qui vous informera des conditions de
reprise du produit. Les frais de reprise et de recyclage pourront vous être
facturés. Les produits de petite taille (et en petites quantités) pourront être repris
par vos organisations de collecte locales.
Espagne: veuillez contacter l'organisation de collecte existante ou votre
administration locale pour les modalités de reprise de vos produits usagés.
2. Pays hors de l'Union européenne
Si vous souhaitez mettre ce produit au rebut, veuillez contacter votre
administration locale qui vous renseignera sur la méthode d'élimination correcte
de cet appareil.
OBS! Produkten
är märkt med
symbolen ovan.
Denna symbol
indikerar att
elektroniska
produkter inte ska
kastas i det
vanliga
hushållsavfallet
eftersom det finns
ett separat
avfallshanteringssystem för dem.
v
HT-SB60 new_com.fm
2012 July17
Informazioni per un corretto smaltimento
Attenzione: Il
dispositivo è
contrassegnato
da questo
simbolo, che
segnala di non
smaltire le
apparecchiature
elettriche ed
elettroniche
insieme ai
normali rifiuti
domestici. Per tali
prodotti è previsto
un sistema di
raccolta a parte.
Informação sobre Eliminação de Produtos
A.
Attenzione: Per smaltire il presente dispositivo, non utilizzare il normale
bidone della spazzatura!
Le apparecchiature elettriche ed elettroniche usate devono essere gestite a
parte e in conformità alla legislazione che richiede il trattamento, il recupero
e il riciclaggio adeguato dei suddetti prodotti.
In seguito alle disposizioni attuate dagli Stati membri, i privati residenti nella
UE possono conferire gratuitamente le apparecchiature elettriche ed
elettroniche usate a centri di raccolta designati*.
In alcuni paesi*, anche il rivenditore locale può ritirare gratuitamente il vecchio
prodotto se l'utente acquista un altro nuovo di tipologia simile.
*) Per maggiori informazioni si prega di contattare l'autorità locale
competente.
Se le apparecchiature elettriche o elettroniche usate hanno batterie o
accumulatori, l'utente dovrà smaltirli a parte preventivamente in conformità
alle disposizioni locali.
Lo smaltimento corretto del presente prodotto contribuirà a garantire che i
rifiuti siano sottoposti al trattamento, al recupero e al riciclaggio necessari
prevenendone il potenziale impatto negativo sull'ambiente e sulla salute
umana, che potrebbe derivare da un'inadeguata gestione dei rifiuti.
2. In paesi che non fanno parte dell'UE
Se si desidera eliminare il presente prodotto, contattare le autorità locali e
informarsi sul metodo di smaltimento corretto.
Per la Svizzera: Le apparecchiature elettriche o elettroniche usate possono
essere restituite gratuitamente al rivenditore, anche se non si acquista un
prodotto nuovo. Altri centri di raccolta sono elencati sulle homepage di
www.swico.ch o di www.sens.ch.
B. Informazioni sullo smaltimento per gli utenti commerciali
1. Nell'Unione europea
Se il prodotto è impiegato a scopi commerciali, procedere come segue per
eliminarlo.
Contattare il proprio rivenditore SHARP che fornirà informazioni circa il ritiro
del prodotto. Potrebbero essere addebitate le spese di ritiro e riciclaggio.
Prodotti piccoli (e quantitativi ridotti) potranno essere ritirati anche dai centri
di raccolta locali.
Per la Spagna: Contattare il sistema di raccolta ufficiale o l'ente locale
preposto al ritiro dei prodotti usati.
2. In paesi che non fanno parte dell'UE
Se si desidera eliminare il presente prodotto, contattare le autorità locali e
informarsi sul metodo di smaltimento corretto.
1.
Atenção: O seu
produto está
identificado com
este símbolo.
Significa que
os produtos
eléctricos e
electrónicos não
devem ser
misturados com
o lixo doméstico
comum. Existe
um sistema de
recolhas
específico para
estes produtos.
Informatie over verantwoorde verwijdering
Informatie over afvalverwijdering voor gebruikers (particuliere
huishoudens)
In de Europese Unie
Let op: Deze apparatuur niet samen met het normale huisafval weggooien!
Afgedankte elektrische en elektronische apparatuur moet gescheiden worden
ingezameld conform de wetgeving inzake de verantwoorde verwerking,
terugwinning en recycling van afgedankte elektrische en elektronische
apparatuur.
Na de invoering van de wet door de lidstaten mogen particuliere huishoudens
in de lidstaten van de Europese Unie hun afgedankte elektrische en
elektronische apparatuur kosteloos* naar hiertoe aangewezen
inzamelingsinrichtingen brengen*.
In sommige landen* kunt u bij de aanschaf van een nieuw apparaat het oude
product kosteloos bij uw lokale distributeur inleveren.
*) Neem contact op met de plaatselijke autoriteiten voor verdere informatie.
Als uw elektrische of elektronische apparatuur batterijen of accumulatoren
bevat dan moet u deze afzonderlijk conform de plaatselijke voorschriften
weggooien.
Door dit product op een verantwoorde manier weg te gooien, zorgt u ervoor
dat het afval de juiste verwerking, terugwinning en recycling ondergaat en
potentiële negatieve effecten op het milieu en de menselijke gezondheid
worden voorkomen die anders zouden ontstaan door het verkeerd verwerken
van het afval.
2. In andere landen buiten de Europese Unie
Als u dit product wilt weggooien, neem dan contact op met de plaatselijke
autoriteiten voor informatie omtrent de juiste verwijderingsprocedure.
Voor Zwitserland: U kunt afgedankte elektrische en elektronische apparatuur
kosteloos bij de distributeur inleveren, zelfs als u geen nieuw product koopt.
Aanvullende inzamelingsinrichtingen zijn vermeld op de startpagina van
www.swico.ch of www.sens.ch.
B. Informatie over afvalverwijdering voor bedrijven
1. In de Europese Unie
Als u het product voor zakelijke doeleinden heeft gebruikt en als u dit wilt
weggooien:
Neem contact op met uw SHARP distributeur die u inlichtingen verschaft over
de terugname van het product. Het kan zijn dat u een
afvalverwijderingsbijdrage voor de terugname en recycling moet betalen.
Kleine producten (en kleine hoeveelheden) kunnen door de lokale
inzamelingsinrichtingen worden verwerkt.
Voor Spanje: Neem contact op met de inzamelingsinrichting of de lokale
autoriteiten voor de terugname van uw afgedankte producten.
2. In andere landen buiten de Europese Unie
Als u dit product wilt weggooien, neem dan contact op met de plaatselijke
autoriteiten voor informatie omtrent de juiste verwijderingsprocedure.
A.
1.
Let op: Uw
product is van
dit merkteken
voorzien. Dit
betekent dat
afgedankte
elektrische en
elektronische
apparatuur niet
samen met het
normale
huisafval
mogen worden
weggegooid. Er
bestaat een
afzonderlijk
inzamelingssysteem voor
deze
producten.
Informações sobre a Eliminação de Produtos para os
Utilizadores (particulares)
Na União Europeia
Atenção: Se quiser eliminar este equipamento, não o deve fazer
juntamente com o lixo doméstico comum!
O equipamento eléctrico e electrónico deve ser tratado
separadamente e ao abrigo da legislação aplicável que obriga a
um tratamento, recuperação e reciclagem adequados de
equipamentos eléctricos e electrónicos usados.
Após a implementação desta legislação por parte dos Estadosmembros, todos os cidadãos residentes na União Europeia
poderão entregar o seu equipamento eléctrico e electrónico usado
em estações de recolha específicas a título gratuito*.
Em alguns países* o seu revendedor local também pode recolher
o seu equipamento usado a título gratuito na compra de um novo
equipamento.
*)Contacte as entidades locais para mais informações.
Se o seu equipamento eléctrico e electrónico usado funcionar a
pilhas ou baterias, deverá eliminálas em separado, conforme a
legislação local, e antes de entregar o seu equipamento.
Ao eliminar este produto correctamente estará a contribuir para
que o lixo seja submetido aos processos de tratamento,
recuperação e reciclagem adequados. Desta forma é possível
evitar os efeitos nocivos que o tratamento inadequado do lixo
poderia provocar no ambiente e na saúde.
2. Em outros Países fora da UE
Se quiser eliminar este produto, contacte as entidades locais e
informese sobre o método correcto para proceder à sua
eliminação.
Na Suíça: O equipamento eléctrico e electrónico é aceite, a título
gratuito, em qualquer revendedor, mesmo que não tenha adquirido
um novo produto. Poderá encontrar uma lista das estações de
recolha destes equipamentos na página da Web www.swicho.ch
ou www.sens.ch.
B. Informações sobre a Eliminação de Produtos para
Utilizadores-Empresas
1. Na União Europeia
Se o produto for usado para fins comerciais e quiser eliminá-lo:
Contacte o seu revendedor SHARP que irá informá-lo sobre a
melhor forma de eliminar o produto. Poderá ter de pagar as
despesas resultantes da recolha e reciclagem do produto. Alguns
produtos mais pequenos (e em pequenas quantidades) poderão
ser recolhidos pelas estações locais.
Na Espanha: Contacte o sistema de recolhas público ou as
entidades locais para mais informações sobre a recolha de
produtos usados.
2. Em outros Países fora da UE
Se quiser eliminar este produto, contacte as entidades locais e
informese sobre o método correcto para proceder à sua
eliminação.
A. Informazioni sullo smaltimento per gli utenti (privati)
1. Nell'Unione europea
Tietoja laitteen hävittämisestä
Hävitysohjeet käyttäjille (yksityiset kotitaloudet)
Euroopan unionissa
Huomio: Jos haluat hävittää tämän laitteen, älä käytä tavallista
jätesäiliötä.
Käytetyt sähkö- ja elektroniikkalaitteet pitää hävittää erikseen noudattaen lainsäädäntöä, joka takaa käytettyjen sähkö- ja elektroniikkalaitteiden oikean käsittelyn, keräämisen ja kierrättämisen.
Jäsenvaltioiden täytäntöönpanoa seuraten yksityiset kotitaloudet
EU:n jäsenvaltioissa voivat palauttaa käytetyt sähkö- ja elektroniikkalaitteet määrättyihin keräyspaikkoihin ilmaiseksi*. Joissakin
maissa* paikalliset vähittäismyyjät voivat myös ottaa vastaan vanhan tuotteen ilmaiseksi, jos asiakas ostaa vastaavan uuden tuotteen.
*) Pyydä lisätietoja paikallisviranomaisilta.
Jos käytetyissä sähkö- tai elektroniikkalaitteissa käytetään paristoja
tai akkuja, hävitä nämä tuotteet etukäteen erikseen paikallisten
säädösten mukaisesti.
Hävittämällä tuotteen asiamukaisesti, autat varmistamaan, että jätteet käsitellään, kerätään ja kierrätetään asianmukaisella tavalla.
Näin vältytään haitallisilta ympäristö- ja terveysvaikutuksilta, joita
saattaa olla seuraamuksena jätteen epäasianmukaisesta käsittelystä.
2. Muissa maissa EU:n ulkopuolella
Jos haluat hävittää tuotteen, ota yhteys paikallisiin viranomaisiin ja
pyydä ohjeita tuotteen asianmukaiseen hävittämiseen.
B. Hävitysohjeet yrityskäyttäjille
1. Euroopan unionissa
Jos tuotetta on käytetty yrityskäytössä, ja haluat hävittää sen,
Oota yhteys SHARP-jälleenmyyjään, joka antaa sinulle lisäohjeita
tai ottaa tuotteen vastaan. Sinulta saatetaan veloittaa tuotteen vastaanottamisesta ja kierrätyksestä johtuvat kustannukset. Paikalliset
keräyspisteet saattavat ottaa vastaan pienet tuotteet (ja pienet
määrät).
2. Muissa maissa EU:n ulkopuolella
Jos haluat hävittää tuotteen, ota yhteys paikallisiin viranomaisiin ja
pyydä ohjeita tuotteen asianmukaiseen hävittämiseen.
A.
1.
Huomio: Tuote
on merkitty
tällä symbolilla. Tämä
tarkoittaa, että
käytettyjä sähkö- ja elektroniikkalaitteita
ei saa sekoittaa
kotitalouden
yleisjätteiden
kanssa. Näille
tuotteille on
olemassa erillinen
keräysjärjestelmä.
vi
HT-SB60 new_com.fm
2012 July17
Information on Proper Disposal
Informationen zur Batterieentsorgung
Die für dieses Produkt mitgelieferte Batterie kann Spuren von Blei
enthalten.
Für die EU: Die durchgestrichene Abfalltonne bedeutet, dass
gebrauchte Batterien nicht mit dem Haushaltsmüll entsorgt werden
sollten! Es gibt getrennte Sammelsysteme für gebrauchte Batterien,
welche eine ordnungsgemäße Behandlung und Verwertung
entsprechend gesetzlicher Vorgaben erlauben. Weitere Einzelheiten
erhalten Sie von IhrerGemeindeverwaltung.
Für die Schweiz: Die gebrauchte Batterie kann an der Verkaufsstelle
zurückgegeben werden.
Für andere Nicht-EU Staaten: Bitte erkundigen Sie sich bei Bedarf
bei Ihrer Gemeindeverwaltung nach weiteren Informationen zur
Entsorgung von gebrauchten Batterien.
Information on Disposal for Users (private households)
In the European Union
Attention: If you want to dispose of this equipment, please do not use the
ordinary dustbin!
Used electrical and electronic equipment must be treated separately and
in accordance with legislation that requires proper treatment, recovery
and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households
within the EU states may return their used electrical and electronic
equipment to designated collection facilities free of charge*.
In some countries* your local retailer may also take back your old product
free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or
accumulators, please dispose of these separately beforehand according
to local requirements.
By disposing of this product correctly you will help ensure that the waste
undergoes the necessary treatment, recovery and recycling and thus
prevent potential negative effects on the environment and human health
which could otherwise arise due to inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities
and ask for the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be returned
free of charge to the dealer, even if you don't purchase a new product.
Further collection facilities are listed on the homepage of www.swico.ch
or www.sens.ch.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the takeback of the product. You might be charged for the costs arising from takeback and recycling. Small products (and small amounts) might be taken
back by your local collection facilities.
For Spain: Please contact the established collection system or your local
authority for take-back of your used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities
and ask for the correct method of disposal.
A.
1.
Attention: Your
product is
marked with
this symbol. It
means that
used electrical
and electronic
products
should not be
mixed with
general
household
waste. There
is a separate
collection
system for
these
products.
Information sur la mise au rebut de la pile
Les piles/accus fournies avec ce produit peuvent contenir des traces
de Plomb.
Au sein de l’Union Européenne : Le symbole de la poubelle sur
roues barrée laisse supposer que les piles/accus usagées ne
doivent pas être mélangées avec les déchets ménagers! Il existe un
mode de collecte séparé pour les piles/accus usagées, ce qui
permet d’effectuer un traitement et un recyclage en accord avec la
législation. Veuillez contacter une autorité locale pour plus de
renseignements sur le système mis en place.
Pour la Suisse : Les piles/accus usagées doivent être retournées
chez votre détaillant.
Pour les pays hors Union Européenne : Veuillez contacter une
autorité locale afin de connaître la bonne méthode à utiliser pour la
collecte de vos piles/accus usagées.
Información sobre la eliminación de la batería
Las baterías suministradas con este producto contienen pequeñas
cantidades de Plomo.
Para EU: El contenedor de basura con ruedas tachado indica que
las baterías usadas no deberían mezclarse con los residuos
domésticos generales. Existe un sistema de recogida independiente
de baterías usadas, para permitir un correcto tratamiento y reciclado
de acuerdo con la legislación vigente. Por favor póngase en contacto
con el sistema de recogida establecido o con las autoridades locales
para la recogida selectiva de las baterías usadas.
Para Suiza: Las baterías usadas deben ser retornadas al punto de
venta.
Para otros países fuera de la Unión Europea: Por favor póngase en
contacto con las autoridades locales para un correcto procedimiento
de eliminación de las baterías usadas.
Information om batteriavyttring
Batteriet som följer med denna produkt kan innehålla spår av Bly.
För EU: Batteriet är märkt med den överkorsade soptunnan vilket
betyder att det inte ska kastas i det vanliga hushållsavfallet. Det finns
ett separat insamlingssystem för batterier för att underlätta korrekt
behandling och återvinning enligt gällande lagstiftning. Kontakta
kommunen för vidare information om insamling och återvinning.
För Schweiz: Använda batterier lämnas till inköpsstället.
För länder utanför EU: Kontakta de lokala myndigheterna för
information om gällande sorterings- och återvinningsföreskrifter om
du behöver göra dig av med ett använt batteri.
Informazioni sullo smaltimento della batteria
La batteria fornita con questo prodotto contiene tracce di Piombo.
Per EU: Il cassonetto barrato indica che le batterie usate non devono
essere gettate assieme ai rifiuti domestici! Vi è un sistema di raccolta
differenziata per le batterie usate, che consente il loro corretto
trattamento e riciclo secondo quanto previsto dalle leggi vigenti. Vi
prego di contattare le locali autorità per i dettagli del sistema di
raccolta e riciclaggio.
Per la Svizzera: Le batterie usate devono essere restituite al punto
vendita.
Per altri Stati non-EU: Vi prego di contattare le autorità locali per
conoscere il metodo corretto di conferimento delle batterie usate.
vii
HT-SB60 new_com.fm
2012 July17
Informatie over afvalverwerking van batterijen
De batterij die bij dit toestel geleverd wordt bevat sporen van Lood.
Voor EU: De doorgestreepte vuilnisbak op wieltjes duidt aan dat de
gebruikte batterijen niet mogen terechtkomen in het gewone
huishoudelijke afval. Er bestaat een gescheiden ophaalsysteem
voor deze gebruikte batterijen om eigen behandeling en recyclage
volgens de wetgeving toe te laten. Gelieve de locale autoriteiten te
contacteren voor de details van ophaling en recyclage.
Voor Zwitserland: De gebruikte batterij moet bij hetverkooppunt
teruggebracht worden.
Voor andere niet EU landen: Gelieve contact op te nemen met uw
locale autoriteiten voor de correcte methode van verwerking van de
gebruikte batterijen.
Tietoja paristojen hävittämisestä
Tämän tuotteen mukana oleva paristo/akku saattaa sisältää
jäänteitä Lyijy.
EU-maat: Paristo/akku on merkitty yliviivatun roskasäiliön
symbolilla, mikä tarkoittaa, että sitä ei saa hävittää kotitalouden
yleisjätteiden kanssa. Paristoille/akuille on olemassa erillinen
keräysjärjestelmä, joka helpottaa niiden asiamukaista käsittelyä ja
lainmukaista kierrätystä. Ota yhteys kuntaviranomaisiin saadaksesi
lisätietoa keräyksestä ja kierrätyksestä.
Sveitsi: Käytetyt paristot/akut palautetaan ostopaikkaan.
EU:n ulkopuoliset maat: Ota yhteys paikallisviranomaisiin
saadaksesi lisätietoa voimassa olevista lajittelu- ja
kierrätyssäädöksistä ja ohjeet käytetyn pariston/akun hävittämiseen.
Informação sobre Eliminação de Pilhas
A bateria fornecida com este produto contém traços de chumbo.
Para a União Europeia: O contentor de rodas traçado significa que
as baterias usadas não deverão ser colocadas junto com o lixo
doméstico! Existe um sistema de separação próprio para baterias
usadas, para permitir um tratamento e reciclagem própria de acordo
com a legislação em vigor. Por favor contacte as autoridades locais
para mais detalhes nos esquemas de recolha e reciclagem.
Para a Suíça: As baterias usadas deverão ser devolvidas ao ponto
de venda.
Para os outros países fora da União Europeia: Por favor contacte a
sua autoridade local para o método correcto de disposição das
baterias usadas.
Information on Battery Disposal
The battery supplied with this product contains traces of Lead.
For EU: The crossed-out wheeled bin implies that used batteries
should not be put to the general household waste! There is a
separate collection system for used batteries, to allow proper
treatment and recycling in accordance with legislation. Please
contact your local authority for details on the collection and recycling
schemes.
For Switzerland: The used battery is to be returned to the selling
point.
For other non-EU countries: Please contact your local authority for
correct method of disposal of the used battery.
viii
HT-SB60 new_com.fm
2012 July17
ENGLISH
HT-SB60 Sound Bar Home Theater system consisting of HT-SB60 (sound bar system) and CP-SW60 (active subwoofer
system).
Introduction
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual
carefully. It will guide you in operating your SHARP product.
Note:
This product is recommended for flat panel TV (LED, LCD and plasma).
Accessories
BA
SS
TR
EB
LE
3
AUD
IO
D
The following accessories are included.
Remote Control
(RRMCGA297AWSA)
Subwoofer Stand x 2
Wall Mount Angle x 2
Pattern Paper
Audio Cable x 1
HDMI Cable x 1
“AA” size battery
(UM/SUM-3, R6, HP-7 or similar) x 1
CONTENTS
Page
General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . 3 - 5
Page
Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 12
Operating the TV with the remote control . . . . . . . . . . .12
Preparation for Use
System preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Falling prevention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Placing the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
System connections . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 8
Audio connections to TVs, DVD players, VCRs, etc. . . . 9
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . .13
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Error indicators and warnings . . . . . . . . . . . . . . . . . . . .14
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
E-1
2012 September 14
HT-SB60
1
2
3
4
5
6
7
1
9
Precautions
■
General
● Please ensure that the equipment is positioned in a
well-ventilated area and ensure that there is at least
10 cm (4") of free space along the sides, top and back
of the equipment.
10 cm (4")
10 cm (4") 10 cm (4")
10 cm (4")
10 cm (4")
Warnings:
● The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may
result in a fire or other type of accident causing
damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.
● In case of repairing, please bring the entire system set
to the service centre.
■
10 cm (4")
Volume control
The sound level at a given volume setting depends on
speaker efficiency, location and various other factors. It is
advisable to avoid exposure to high volume levels. Do not
turn the volume on to full at switch on. Listen to music at
moderate levels.
10 cm (4")
● Use the unit on a firm, level surface free from vibration.
● Keep the unit away from direct sunlight, strong
●
●
●
●
●
●
●
●
●
●
●
●
●
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures
higher than 60°C (140°F) or to extremely low
temperatures.
If your system does not work properly, disconnect the
AC power lead from the wall socket and replug.
In case of an electrical storm, unplug the unit for safety.
Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
The AC power plug is used as a disconnect device and
shall always remain readily operable.
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
Attention should be drawn to the environmental aspects
of battery disposal.
This unit should only be used within the range of 5°C 35°C (41°F - 95°F).
The apparatus is designed for use in moderate
climates.
SHARP is not responsible for damage due to improper
use. Refer all servicing to a SHARP authorised service
centre.
E-2
2012 September 14
HT-SB60
1
2
3
4
5
6
7
8
9
Controls and indicators
2
1
3
■
4
5
6
7
8
Sound Bar Front Panel
10
Display
■
Reference page
1. Left Channel Speakers
2. Right Channel Speakers
3. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . 10, 13
4. SOURCE Button . . . . . . . . . . . . . . . . . . . . . . 8, 9, 12
5. Pairing Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7. Demo Indicator . . . . . . . . . . . . . . . . . . . . . . . . 10, 14
8. Sound Mode Button . . . . . . . . . . . . . . . . . . . . 11, 13
9. Volume Down Button . . . . . . . . . . . . . . . . . . . . . . 11
10. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . 11
9
1
2
DIGITAL
3
DIGITAL
Reference Page
1. Dolby Digital Indicator . . . . . . . . . . . . . . . . . . . . 12
2. DTS Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. Muting Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . .11
E-3
2012 September 14
HT-SB60
1
2
3
4
5
6
7
1
9
Controls and indicators (continued)
■
Subwoofer
FRONT VIEW
REAR VIEW
1
3
2
4
PAIRING
AC INPUT
5
Reference page
1. Power/Pairing Indicator . . . . . . . . . . . . . . . . . . . 10
2. Bass Reflect Duct
3. Woofer
■
Reference page
4. Pairing button . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Sound Bar Rear Panel
6
4 5
2 3
1
Reference page
1. HDMI OUT (TV ARC) socket. . . . . . . . . . . . . . . . . 8
2. HDMI IN 1 socket . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. HDMI IN 2 socket . . . . . . . . . . . . . . . . . . . . . . . . . 8
E-4
2012 September 14
HT-SB60
Reference page
4. Optical IN socket . . . . . . . . . . . . . . . . . . . . . . . . . 9
5. Audio IN Terminal . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1
2
3
4
5
6
7
8
9
Controls and indicators (continued)
■
1
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . 10
2. TV ARC Button . . . . . . . . . . . . . . . . . . . . . . . . . 8, 12
3. Music (Sound Mode) Button . . . . . . . . . . . . . . . . 11
4. Cinema (Sound Mode) Button . . . . . . . . . . . . . . 11
5. Sport (Sound Mode) Button . . . . . . . . . . . . . . . . 11
6. BYPASS Button . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7. 3D AUDIO Button . . . . . . . . . . . . . . . . . . . . . . . . . 12
8. APC Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9. TV Operation Button . . . . . . . . . . . . . . . . . . . . . . 12
10. AV SYNC Down Button . . . . . . . . . . . . . . . . . . . . 11
11. Source Button . . . . . . . . . . . . . . . . . . . . . . . 8, 9, 12
12. Subwoofer Level Down Button. . . . . . . . . . . . . . 11
13. Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
14. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . 10
15. Game (Sound Mode) Button . . . . . . . . . . . . . . . . 11
16. News (Sound Mode) Button . . . . . . . . . . . . . . . . 11
17. Night (Sound Mode) Button . . . . . . . . . . . . . . . . 11
18. Dimmer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
19. Demo Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
20. MUTE/Speaker Output Selection Button . . . 11, 12
21. AV SYNC Up Button . . . . . . . . . . . . . . . . . . . . . . 11
22. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . 11
23. Subwoofer Level Up Button . . . . . . . . . . . . . . . . 11
24. Treble Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
25. Volume Down Button . . . . . . . . . . . . . . . . . . . . . 11
14
2
3
4
15
16
5
6
7
17
18
19
20
AUDIO
8
9
21
10
11
22
23
12
24
25
13
Remote Control
TV Operation Buttons (Only SHARP TV):
On/Stand-by Sets the TV Input Select
Button
power to
Button (TV)
“ON” or
“STAND-BY”.
Press the
button to
switch the
input source.
Channel Up
and Down
Buttons
Turn up/
down the TV
volume.
Switch up/
down the TV
channels.
Volume Up
and Down
Buttons
Note:
Some models of SHARP TV may not be operable.
E-5
2012 September 14
HT-SB60
1
2
3
4
5
6
7
1
9
System preparation
■
Sound bar preparation
4 Screw the wall mount angle to the wall as shown in
the illustration. (Total screw is 8 pieces)
To mount the sound bar on the wall
Wall mount angle
Caution:
● Be very careful to prevent the sound bar 3.6 kg (7.92 Ibs.)
from falling when mounting on the wall.
● Before mounting, check the wall strength. (Do not put
on the veneer plaster or whitewashed wall. The sound
bar may fall.) If unsure, consult a qualified service
technician.
● Mounting screws are not supplied. Use appropriate
ones.
● Check all wall mount angle screws for looseness.
● Select a good location. If not, accidents may occur or
the sound bar may get damaged.
● SHARP is not responsible for accidents resulting
from improper installation.
■
Driving screws
Wall mount
angle
Wall
(screws x 4) surface
Wall surface
(screws x 4)
Wall
mount
angle
Wall surface
Note:
Make sure all screws are fully tightened. (screws are not
supplied)
■
Installing the sound bar
1 Align the wall mount slot at the sound bar to the
SHARP designed the sound bar so you may hang them on
the wall. Use proper screws (not supplied). See below for
size and type.
wall mount angle.
2 Slot the sound bar into the wall mount angle.
3 Fix them securely.
3.2 mm (1/8")
Wall surface
5 mm
(3/16")
9 mm (3/8")
Min. 22 mm (7/8")
■
Fixing wall mount angle
(Horizontal position)
1 Fix the pattern paper to the wall in horizontal
position as below.
926 mm
Wall surface 44 mm
44 mm
Falling prevention
29 mm
Safety wires (not supplied) are useful to prevent the sound
bar from falling off the table.
29 mm
Pattern paper
2 Make a hole on the wall following the screw point
marks on the pattern paper by using a drill.
32 mm (1-1/4")
8-9 mm (3/8")
Wall surface
3 Fix a wall mount plug (not supplied) into the hole
using a hammer, until it is flush with the wall
surface.
32 mm (1-1/4")
8-9 mm (3/8")
Loop the safety wires (not supplied) into each hole as
shown and tie the safety wires to the LCD TV stand.
Wall surface
E-6
2012 September 14
HT-SB60
1
2
3
4
5
6
7
8
9
Placing the system
Notes:
Installation image:
● As the sound from the system is omni-directional, you can
place the sound bar anywhere you like. However, it is
recommended to place it as close to the TV as possible.
● The front panel of the sound bar is not removable.
TV
Caution:
● Do not change the installation direction when the sound
bar is turned on.
● Do not stand or sit on the sound bar and subwoofer as
you may be injured.
■
Placing the stand
Place the stand as shown.
VCR
DVD player
Subwoofer
Place the system as shown.
Remove the protective film covering the sound bar and
subwoofer before turn on the system.
Stand
System connections
Make sure to unplug the AC power lead before making any connections.
Subwoofer
Sound Bar
Wall socket
AC 220 - 240 V ~ 50/60 Hz
PAIRING
AC INPUT
■
Sound bar and Subwoofer connection
Caution
● Do not allow any objects to fall into or to be placed in the bass reflex duct.
● Do not stand or sit on the sound bar/subwoofer. You may be injured.
E-7
2012 September 14
HT-SB60
Wall socket
AC 220 - 240 V ~ 50/60 Hz
1
2
3
4
5
6
7
1
9
System connections (continued)
■
HDMI Connection
Caution:
Turn off all other equipment before making this connection.
The illustration below shows the flows of the signals.
Audio and Video signal
TV
DVD/Blu-ray
Digital tuner
1. Method 1
This connection is for HDMI TV with ARC (Audio Return Channel).
TV
To HDMI (TV ARC)
input terminal
To HDMI OUT (TV ARC) output terminal
DVD, Blu-ray disc
player or similar
To HDMI output
terminal
Sound Bar
To HDMI input terminal
2. Method 2
This connection is for HDMI TV without ARC (Audio Return Channel).
To HDMI input terminal
TV
To audio output terminal
To Headphone
terminal
DVD, Blu-ray disc
player or similar
To HDMI output
terminal
To HDMI OUT (TV ARC) output terminal
Sound Bar
To HDMI input terminal
To select HDMI 1, 2 or TV ARC function (Source):
Press SOURCE button repeatedly until “HDMI 1”, “HDMI 2” or “TV ARC” appears on the display, or
press TV ARC button on the remote control to select the TV ARC.
Notes:
● This sound bar supports HDMI which enables ARC (Audio Return Channel).
● To enable ARC make sure to use High Speed HDMI™ cable (with ARC).
● This ARC feature requires TV that supports ARC. Refer the operation manual of the TV to determine which terminal supports ARC.
● To listen to the sound from a non-ARC-compatible TV, connect the audio output from TV to this system’s. (refer page 9)
● This sound bar can be operated (power on/off or volume up/down) via a TV or similar component which supports HDMI CEC
(Consumer Electronics Control). If this does not work, it does not mean this system is faulty. Refer to the operation manual of
the respective component on how to activate the CEC.
Example: Go to the Menu of the component to search and enable the CEC. Different brands may have different naming for the
CEC. For SHARP LCD TV, it is named as AQUOS LINK.
● CEC is not available during Low power consumption mode.
● To listen to the sound from this system, you will need to press and hold the
(MUTE) button (refer page 12) or adjust
the speaker output settings within the TV menu.
For details, refer to the operation manual of the TV.
● If you are unable to select external speaker setting from the TV menu (E.g. For SHARP LCD TV, it is named as AQUOS
AUDIO SP), turn the CEC OFF and ON again.
● To enjoy 3D images, this system must be connected to a 3D-compatible TV and components (3D BD player, etc.) via High Speed
HDMI cables. Put on the 3D glasses, otherwise 3D images may not be viewed properly.
● If you want to use HDMI IN 1 socket, please use the supplied HDMI cable.
E-8
2012 September 14
HT-SB60
1
2
3
4
5
6
7
8
9
Audio connections to TVs, DVD players, VCRs, etc.
■
Other connection (without HDMI)
The illustration below shows the flows of audio and video signals.
Audio signal
Video signal
TV
DVD/Blu-ray
Disc Player
Digital tuner, etc.
Notes:
● Refer to the operation manual of the equipment to be connected.
● Fully insert the plugs to avoid fuzzy pictures or noises.
● Connecting via this method may disable TV internal speakers.
● In some cases, a small background noise could emit from the sound bar, when you use the RCA audio output terminal
connection from a TV-Set/DVD/Blu-ray Disc Player. In such case, please change the connection to the HDMI/ARC or
headphone terminal connection. This effect depends on the used TV/DVD/Blu-ray Disc Player-Brand, model and age,
and it is not a quality matter from the sound bar.
■
Connecting a TV, or DVD player, etc.
Connect to the TV using an optical digital cable or an audio cable.
TV
To audio output terminals
or
To optical
digital audio
output
terminal
Optical digital
audio cable
(commercially
available)
Audio signal
Blu-Ray/
DVD player/Digital
Tuner
To
HEADPHONE
terminal
Note:
Make sure that the audio cable end
with ferrite core is connected to the
sound bar AUDIO IN terminal.
Audio cable
(commercially
available)
To OPTICAL
IN (optical)
input terminal
To AUDIO IN
input terminals
Sound Bar
To select OPTICAL function:
Press SOURCE button repeatedly until “OPTICAL” appears on the display.
To select AUDIO IN function:
Press SOURCE button repeatedly until “AUDIO IN” appears on the display.
E-9
2012 September 14
HT-SB60
Ferrite core
1
2
3
4
5
6
7
1
9
General control
Remote control
■
Battery installation
1 Open the battery cover.
2 Insert the supplied battery according to the terminal
indicated in the battery compartment.
When inserting or removing the battery, push it towards
the
battery terminals.
3 Close the battery cover.
Caution:
● Remove the battery if the sound bar will not be used for
a long period of time. This will prevent potential damage
due to battery leakage.
● Do not use rechargeable battery (nickel-cadmium
battery, etc.).
● Installing the battery incorrectly may cause the sound
bar to malfunction.
● Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire or
the like.
Notes concerning use:
● Replace the battery if the operating distance is reduced
or if the operation becomes erratic. Purchase a “AA”
size battery (UM/SUM-3, R6, HP-7 or similar).
● Periodically clean the transmitter on the remote control
and the sensor on the sound bar with a soft cloth.
● Exposing the sensor on the sound bar to strong light
may interfere with operation. Change the lighting or the
direction of the sound bar.
● Keep the remote control away from moisture, heat,
shock, and vibrations.
■
AUDIO
Make sure to enable the HDMI CEC when making
HDMI connection. For details, refer to the operation
manual of the TV.
■
Notes:
● A slight audio delay after TV is turned ON does not
mean that the system is faulty. This is normal.
speaker is enabled” message will be
displayed if SHARP LCD TV does not detect HT-SB60
during power on. However the message “AQUOS audio
with AQUOS LINK is enabled” will be displayed soon as
HT-SB60 is detected. These messages may vary for
other TV model.
● “AQUOS
Test of the remote control
Point the remote control directly at the remote sensor on
the sound bar.
The remote control can be used within the range
shown below:
Remote sensor
■
15° 15°
will enter the demonstration mode.
● To cancel the demonstration mode, press the DEMO
button on the remote control during power stand-by
mode.
● To enter to the low power consumption mode, press
and hold the DEMO button (Demo indicator turns off).
HT-SB60
Connecting the wireless Subwoofer
The sound bar and subwoofer will link automatically
(wirelessly) when turned on as it is already pre-linked at
the factory. If the link cannot be established, please set the
connection by the following method.
1. Press and hold the PAIRING button on the sound bar for
more than 3 seconds.
2. Within 2 minutes, press and hold the PAIRING button on
the subwoofer for more than 3 seconds.
● During pairing process:
E-10
2012 September 14
Demonstration mode
● The first time the sound bar is plugged in, the sound bar
■
0.2 m - 6 m
(8" - 20')
To turn the power on
Press the ON/STAND-BY button on the sound bar or the
remote control.
● The power turns on and the subwoofer indicator turns
blue. If the power does not turn on, check whether the
AC power lead is plugged in properly.
● The system will automatically power on if TV or similar
component which supports HDMI CEC, is turned on.
To set the sound bar to stand-by mode:
Press the ON/STAND-BY button again on the main unit or
the remote control and the subwoofer indicator turns red.
On sound bar:
“PAIRING” will blink.
On subwoofer:
indicator will blink in blue.
1
2
3
4
5
6
7
8
9
General control (continued)
● When pairing is successful:
On sound bar:
On subwoofer:
■
“PAIRING” disappears.
indicator turns blue.
Note:
When the sound bar is turned off and back on again,
muting is cancelled.
Subwoofer
Sound Bar
■
PAIRING
Notes:
● If a device such as microwave oven, wireless LAN card,
Bluetooth device or any other device that uses the
same 2.4GHz frequency near the system, some sound
interruption may be heard due to interference.
● The transmission distance of the wireless signal
between the subwoofer and sound bar is about 10m
(32 feet), but may vary depending on your operating
environment. If a steel-concrete or metallic wall is
between the subwoofer and the sound bar, the system
may not operate at all, because the wireless signal
cannot penetrate metal.
Caution:
● Keep the subwoofer away from water and moisture.
● To get the optimum listening performance, make sure
the area around the sound bar and subwoofer is clear
of any obstacles.
■
Display brightness control
Press the DIMMER button to adjust the brightness of the
display.
■
Dimmer 1
(Display is dim)
Dimmer 2
(Display gets dimmer)
Dimmer Off
(Display is bright)
CINEMA
(for standard sound effect)
GAME
(for game sound effect)
SPORT
(for sport broadcasting)
NEWS
(for news)
NIGHT
(for night)
BYPASS
(for flat sound effect)
Bass and Treble Control
Bass and Treble control is applicable during BYPASS
mode only.
Bass Control
1. Press the BASS button.
2. Within 5 seconds, press the VOL (+ or –) button to adjust
the bass.
■
Volume control
Sound bar operation:
Press the VOLUME +
button to increase the
volume and the VOLUME –
Min 1 2 ..... 99 Max
button for decreasing.
Remote control operation:
Press the VOL + button to increase the volume and the
VOL – button to decrease the volume.
Subwoofer level control
The subwoofer level can be
adjusted.
To increase the level,
–5 –4 ..... +4 +5
press the SW LEVEL
button.
To decrease the level, press the SW LEVEL
button.
Notes:
● When sound from the speaker is distorted, decrease
the subwoofer level.
● When changing the subwoofer level, the output level of
the subwoofer is also changed.
■
AV SYNC level control
The AV SYNC (Audio Video
Synchronization) level can
be adjusted.
To increase the level, press
0 +1 ..... +3
the AV SYNC + button.
To decrease the level, press the AV SYNC – button.
E-11
HT-SB60
(for cinema sound effect)
MUSIC
■
Volume auto fade-in
2012 September 14
Sound Mode
Sound bar operation:
To change to a different mode, press the SOUND MODE
button repeatedly until the desired sound mode is
displayed.
Remote control operation:
Press the desired sound mode button on the remote
control.
Treble Control
1. Press the TREBLE button.
2. Within 5 seconds, press the VOL (+ or –) button to adjust
the bass.
If you turn off and on the sound bar with the volume set to
80 or higher, the volume starts at 40 and fades in to the last
set level.
■
Muting
The volume is muted temporarily when pressing the (MUTE)
button on the remote control. Press again to restore the volume.
1
2
3
4
5
6
7
1
9
General control (continued)
■
General control (continued)
This product incorporates decoders supporting the Dolby
Digital system and DTS system.
Speaker output selection (HDMI
connection)
Press and hold
(MUTE) button on the remote control
until “TV SPEAKER” or “SB SPEAKER” appear on the
display to toggle sound output between this sound bar or
TV.
■
Function
HDMI 1
HDMI 2
TV ARC
OPTICAL
AUDIO IN
When pressing the SOURCE button, the input source will
change. Press the SOURCE button repeatedly to select
desired input source, or
press TV ARC button on the remote control to select TV ARC.
Note:
The backup function will protect the memorised function
mode for a few hours should there be a power failure or the
AC power lead becomes disconnected.
■
APC (Auto Power Off Control)
This sound bar can be set to turn off automatically if no signal is
detected.
1. Press the APC button repeatedly to select the time.
APC 20 min
APC 15 min
APC 5 min
APC 10 min
Operating the TV with the remote
control
You can operate Sharp TVs with this system’s remote
control.
■
Watching TV
2 Pressing the TV CH
channel switching.
or
button enables TV
3 Press the TV VOL + or – button to adjust the TV
volume.
Audio Return Channel (ARC) (Audio
Return Channel submenu)
Other operable button
The audio return channel (ARC) function enables an HDMI
ARC-capable TV to send the audio stream to the HDMI OUT
socket of the receiver. To use this function, you must select
the TV ARC input and your TV must supports the ARC.
■
One of the digital audio systems for theatrical
use. As the sound quality is emphasized, you
can enjoy the realistic sound effect in the home
theatre system.
Lights up when detecting DTS signal.
Dolby Digital One of the digital audio systems for theatrical
use. You can also enjoy the stereophonic effect
in the home theatre system.
Lights up when detecting Dolby Digital signal.
PCM
This is a general term for digitally encoded audio
(Pulse Code signals on a CD or DVD.
Modulation) This sound bar lets you enjoy playback of digital
signals from sources such as CD or DVD.
Point the remote control at the TV.
1 Press the TV ( ) ON/STAND-BY button to turn on
the TV.
2. The sound bar will enter the power stand-by mode automatically
if no signal is detected after the preset time has elapsed.
■
DTS (Digital
Theatre
Systems)
Input Select Button
3D sound mode
S+ 3D technology creates 3D sound through speakers
regardless of the type of sound source, whether it is
monaural, stereo or multichannel. It simulates sound
transmission characteristics using digital signal processing
to create a widening effect on the sound in the ambient
space around the sound source.
By using this technology, multichannel surround sound can
be produced from 2.1ch source.
Press the 3D AUDIO button repeatedly to select:
3D AUDIO 1 : Sound effect that emphasizes 3D
sound.
3D AUDIO 2 : Sound effect that maintains the 3D
sound and improve vocal clarity.
3D AUDIO OFF : 3D sound effect off.
E-12
2012 September 14
HT-SB60
1
2
3
4
5
6
7
8
9
Troubleshooting chart
Many potential problems can be resolved by the owner
without calling a service technician.
If something is wrong with this product, check the following
before calling your authorised SHARP dealer or service
centre.
■
Symptom
● Wireless connection
cannot be
established.
General
Symptom
● No sound is heard.
■
Possible cause
● Is the input signal (selection) set
Remote control
● The remote control does
not operate properly.
used?
● Is the HDMI cable connected
correctly?
Connect the HDMI cable correctly
and then perform the reset
procedure. (refer this page)
● Do not connect or disconnect an
HDMI cable whilst power is on. This
may lead to operation problems.
subwoofer is not well
balanced.
● Power turns off
suddenly.
● When a button is
● Set the sound bar to the stand-by
● The power is not
● Is the sound bar unplugged?
● The protection circuit may be
pressed, the sound
bar does not
respond.
turned on.
■
● Background noise
● Please change to HDMI/ARC or
cannot be
established.
● Is the AC power lead of the
sound bar plugged in?
● Is the battery inserted?
Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet or on the transmitter on the remote
control. Condensation can cause the sound bar to
malfunction. If this happens, leave the power on until
normal playback is possible (about 1 hour). Wipe off any
condensation on the transmitter with a soft cloth before
operating the sound bar.
mode and then turn it back on.
● Depending on the TV and Video
● Wireless connection
another equipment used
simultaneously?
be turned on with the
remote control.
computers or mobile phones.
● 3D images not
appears when
connecting with
RCA audio output
terminal connection
from a TV-set/ DVD/
Blu-ray Disc Player.
on the remote sensor?
● Is the remote control for
● The sound bar cannot
■
activated. Unplug and plug in the
power lead again after 5 minutes or
more.
displayed on the TV.
front of the sound bar?
● Is there a strong light shining
● Is the HDMI cable connected
● Move the speaker away from any
during playback.
incorrect?
minimum or maximum level?
correctly?
Connect the HDMI cable correctly
and then perform the reset
procedure.
Possible cause
● Is the battery polarity correct?
● Is the battery dead?
● Is the distance or angle
● Are there any obstructions in
● Is the subwoofer level set to the
● Noise is heard
(especially metal) blocking between
the sound bar and subwoofer.
● Manually re-link the sound bar and
subwoofer (refer page 10).
Symptom
properly?
● Is the volume level set to “Min”?
● Is muting activated?
● Is HDMI compliant equipment being
● The sound from
Possible cause
● Make sure there is no obstacles
component, 3D images may not be
displayed.
Check the operation manual of the
respective component.
● HDMI cable not support 3D image.
headphone terminal from TV-Set/
DVD/Blu-ray Disc Player. This
effect may occur depending on
TV/DVD/Blu-ray Disc PlayerBrand, model and age, and it is
not the sound bar problem.
● Check the distance between the
sound bar and subwoofer (less than
10m (32 feet)).
● Make sure there is no other wireless
If problem occurs during operation
When this product is subject to strong external interference
(mechanical shock, excessive static electricity, abnormal
supply voltage due to lightning, etc.) or if it is operated
incorrectly, it may malfunction.
If such a problem occurs, do the following:
1. Set the sound bar to the stand-by mode and turn the power
on again.
2. If the sound bar is not restored in the previous operation,
unplug and plug in the sound bar again, and then turn the
power on.
■
Factory reset, clearing all memory
Make sure to disconnect all output and input cables
attached to the sound bar before performing the factory
reset.
1. Press the ON/STAND-BY button to enter the power
stand-by mode.
2. whilst pressing the SOUND MODE button, press and
hold the ON/STAND-BY button until “RESET” appears.
devices near the unit.
Caution:
This operation will erase all data stored in memory.
E-13
2012 September 14
HT-SB60
1
2
3
4
5
6
7
1
9
Specifications
Maintenance
■
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth.
Caution:
● Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet finish.
● Do not apply oil to the inside of each component. It may
cause malfunctions.
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes
for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production unit. There maybe some deviations
from these values in individual unit.
Error indicators and warnings
When you fail to perform operations properly, the following
messages are displayed on the sound bar.
Display
Sound Bar
Power source
Power
consumption
Dimension
Meaning
● When there is no input signal.
●
●
(Display blinks)
■
●
●
●
Play back the connected
equipment.
Nonstandard signal. Cannot
be recognized.
Signals other than DOLBY
DIGITAL, DTS, Linear PCM
cannot be recognized.
Poor connection of the digital
audio input terminal.
Turn off the sound bar and
check if the cable is
connected properly.
When the protection circuit is
activated.
Demo indicator
(blinks red)
Weight
Output power
Output
HDMI™ output: (audio/video support up
terminal
to 1080p) x 1
Input terminal analogue input (AUDIO IN): x 1
500 mV / 47 kohms
Optical digital input (OPTICAL):
Square type x 1
HDMI input: (audio/video support up to
1080p) x 2
Type
2 Way speaker system
5.7 cm (2 -1/4") woofer
2.5 cm (1") Soft Dome
Maximum
160 W
input power
Rated input
80 W
power
Impedance
4 ohms
(*) This power consumption value is obtained when the
sound bar is in low power consumption mode. (Demo
indicator turns off).
■
Subwoofer
Power source
Power
consumption
Output power
Type
Maximum
input power
Rated input
power
Impedance
Dimensions
Weight
E-14
2012 September 14
HT-SB60
AC 220 - 240 V ~ 50/60 Hz
Power on: 38 W
Power standby: 0.4 W (*)
Width: 1385 mm (54 - 1/2")
Height: 73 mm (2 - 7/8")
Depth: 68 mm (2 - 11/16")
3.6 kg (7.92 lbs.)
RMS: Total 160 watts
RMS: 160 W (80 W + 80 W) (10% T.H.D.)
RMS: 120 W (60 W + 60 W) (1% T.H.D.)
AC 220 - 240 V ~ 50/60 Hz
33 W
RMS: 150 W (10% T.H.D.)
RMS: 120 W (1% T.H.D.)
Subwoofer system
16 cm (6 - 5/16") woofer
300 W
150 W
3 ohms
Width: 144 mm (5 - 11/16")
Height: 430 mm (16 - 15/16")
Depth: 306 mm (12 - 1/16")
6.1 kg (13.42 lbs.)
1
2
3
4
5
6
7
8
9
TINSZB342AWZZ
HT-SB60_Back.fm
12H R AS 1
2012July27
UP
HT-SB60
SOUND BAR HOME THEATER SYSTEM
DOWN