Canon EOS-1DX Instruction manual

CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
U.S.A.
CANON U.S.A. INC.
One Canon Plaza, Lake Success, NY 11042-1198, U.S.A.
For all inquires concerning this product, call toll free in the U.S.
1-800-OK-CANON
CANADA
CANON CANADA INC. HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada
CANON CANADA INC. MONTREAL BRANCH
5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada
CANON CANADA INC. CALGARY OFFICE
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada
For all inquiries concerning this product, call toll free in Canada
1-800-OK-CANON
EUROPE,
AFRICA &
MIDDLE EAST
CANON EUROPA N.V.
Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands
CANON FRANCE S.A.S.
17,Quai du Président Paul Doumer, 92414 Courbevoie Cedex, France
CANON UK LTD.
Woodhatch Reigate,Surrey RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano 8, 20097 San Donato Milanese, (MI), Italy
CANON Schweiz A.G.
Industriestrasse 12, 8305 Dietlikon, Switzerland
Canon GmbH
Zetschegasse 11, A-1230 Vienna, Austria
CANON España,S.A.
Av. De Europa,6 Alcobendas 28108 Madrid, Spain
CANON Portugal S.A.
Rua Alfredo da Silva,14 Alfragide 2610-016 Amadora, Portugal
CENTRAL &
SOUTH AMERICA
CANON LATIN AMERICA, INC.
703 Waterford Way, Suite 400 Miami, FL 33126,U.S.A.
ASIA
CANON (China) Co., LTD.
15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China
CANON HONGKONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632
CANON KOREA CONSUMER IMAGING INC.
Canon BS Tower 5F, #168-12 Samseong-dong, Gangnam-gu, Seoul, Korea
OCEANIA
CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
JAPAN
CANON MARKETING JAPAN INC.
16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan
This Instruction Manual booklet is current as of February 2012. For information on
the camera’s compatibility with any accessories and lenses introduced after this
date, contact any Canon Service Center.
CPX-E011-001
© CANON INC. 2012
Wired LAN Instruction Manual
C
Y
P
O
E
INSTRUCTION
MANUAL
EOS-1D X wired LAN functions enable the following operations.
Wired LAN Functions
FTP Transfer
Transfer images to an FTP
server
EOS Utility
Use EOS Utility to capture,
view, and download images
remotely
Y
P
O
WFT Server
Use a web browser to
capture, view, and
download images remotely
C
Media Server
View images on a DLNAcompatible TV or other
devices
2
Synchronizing the Camera Time
Slave camera
LAN cable
Master camera
Y
P
O
Slave camera
C
Hub
LAN cable
Master camera
3
Conventions Used in this Manual
These instructions assume that your wired LAN and FTP server
settings are complete. For details on configuring these settings, refer
to the documentation provided with the respective equipment.
Terms in brackets [ ] indicate button or icon names or other
software elements. Brackets also denote camera menu items.
Page numbers in parentheses indicate where you can find additional
information.
These instructions assume that you have read the Camera
Instruction Manual and are familiar with operating the camera.
Sections of this manual labeled with the following symbols contain
information of the corresponding nature.
: Warnings to avoid potential problems are labeled with a caution
symbol.
Y
P
O
: Supplemental information is labeled with a note symbol.
C
Windows is a trademark or registered trademark of Microsoft
Corporation in the United States and other countries.
Macintosh is a registered trademark of Apple Corporation in the
United States and other countries.
UPnP is a trademark of the UPnP Implementers Corporation.
All other corporate and brand names in this manual are
trademarks or registered trademarks of their respective owners.
Using the camera for remote image transfer, capture, or viewing requires
adequate knowledge of configuring your wired LAN and FTP server.
Canon cannot provide support for configuring wired LANs or FTP servers.
Note that Canon cannot be held liable for any loss or damage to the camera
from erroneous network or FTP server settings. In addition, Canon cannot be
held liable for any other loss or damage caused by use of the camera.
4
Chapter List
Introduction
2
1
Basic Network Settings
9
2
Transferring Images to an FTP Server
21
3
Remote Capture Using EOS Utility
43
4
Remote Capture Using WFT Server
49
5
Using the Camera as a Media Server
65
6
Managing Settings Information
69
7
Synchronizing the Camera Time
79
8
Troubleshooting
83
9
Reference
99
C
Y
P
O
5
Contents
Introduction
Conventions Used in this Manual ..................................................................... 4
Chapter List ...................................................................................................... 5
Contents ........................................................................................................... 6
1
Basic Network Settings
LAN Cable Connection ...................................................................................
Getting Ready ................................................................................................
Displaying the Connection Wizard..................................................................
Selecting the Communication Method and LAN Type....................................
Configuring Network Settings .........................................................................
10
11
12
14
17
2
Transferring Images to an FTP Server
21
Configuring FTP Communication Settings .....................................................
Automatic Image Transfer After Each Shot ....................................................
Transferring Images Individually.....................................................................
Batch Transfer ................................................................................................
Checking Image Transfer History ...................................................................
Viewing Transferred Images...........................................................................
22
25
30
34
40
42
3
Remote Capture Using EOS Utility
43
4
Remote Capture Using WFT Server
49
Configuring WFT Server Communication Settings.........................................
Displaying WFT Server...................................................................................
Viewing Images ..............................................................................................
Remote Capture [Camera control]..................................................................
Remote Capture [Simple control] ...................................................................
Remote Capture .............................................................................................
50
52
54
57
61
63
Using the Camera as a Media Server
65
5
6
C
9
Y
P
O
Configuring EOS Utility Communication Settings........................................... 44
Using EOS Utility ............................................................................................ 48
Configuring Media Server Communication Settings....................................... 66
Displaying Captured Images on a Television ................................................. 67
Contents
6
Managing Settings Information
7
Synchronizing the Camera Time
8
Troubleshooting
9
Reference
69
Checking Settings ........................................................................................... 70
Changing Settings........................................................................................... 72
Saving and Loading Settings .......................................................................... 76
79
Synchronizing the Time................................................................................... 80
83
Handling Error Messages................................................................................ 84
Checking Network Settings ............................................................................. 97
99
Creating and Registering Captions ............................................................... 100
Index ............................................................................................................. 114
C
Y
P
O
7
C
8
Y
P
O
1
Basic Network Settings
Y
P
O
Complete the basic network settings by following
connection instructions on the camera menu screen.
C
9
LAN Cable Connection
Connecting a LAN Cable
Open the Ethernet RJ-45 terminal
cover and connect the LAN cable.
LAN Cable
Use a highly shielded Category 5e or higher STP (Shielded Twisted
Pair) Gigabit Ethernet cable.
C
10
Y
P
O
Getting Ready
[FTP trans.], [EOSUtility], [WFTserver]
The connection instructions help you connect the camera via a wired
LAN connection.
Set up the EOS-1D X and computer in advance so that you can connect
the camera to the computer via wired LAN.
[MediaServ.]
Set up a DLNA*-compatible television, digital photo frame, or similar
media player so that it is ready for use after the EOS-1D X is
connected.
* DLNA: Digital Living Network Alliance
C
Y
P
O
11
Displaying the Connection Wizard
This section’s explanation follows the flow of the connection
instructions. If an error is displayed, see “Troubleshooting” in Chapter 8
(p.83) and check the settings.
Pressing the shutter button or other camera controls during
configuration will cause the connection instructions to close. Do not
press the shutter button or other controls until configuration is
finished.
On the [52] tab, set [Auto power off] to [Disable]. If auto power off
is activated, the connection instructions will close during the
configuration process.
1
Turn the camera on.
Y
P
O
the communication
2 Display
functions menu.
C
On the camera, press the <7>
button.
On the [53] tab, select
[Communication settings] and
press <0>.
[Communication func].
3 Select
Set [Communication func] to
[Enable], and then press <0>.
X [Network settings] is now available.
4
12
Select [Network settings].
Displaying the Connection Wizard
[Connection wizard].
5 Select
X The [Select communication
method] screen is displayed.
X The <Y> lamp on the camera
starts blinking.
C
Y
P
O
13
Selecting the Communication Method and LAN Type
Selecting the Communication Method
Turn the <5> dial to select the
communication method, and then
press <0>.
Select [OK] and press <0> to go to
the next screen.
• FTP trans.
Select this option to transfer captured images to an FTP server.
Images can be automatically transferred as you shoot them, or you can
select images to be transferred later.
Computer Operating Systems
Use of [FTP trans.] requires that one of the following operating
systems be installed on your computer. In addition, the computer
must be set up as an FTP server in advance.
• Windows 7 (Professional, Enterprise, or Ultimate Edition for
32- or 64-bit systems)
• Windows Vista (Business, Enterprise, or Ultimate Edition for
32- or 64-bit systems)
• Windows XP Professional
• Mac OS X 10.6 or 10.7
For instructions on setting up your computer as an FTP server, refer
to the computer documentation.
The following operating systems cannot be used because FTP
server functionality is not provided.
• Windows 7 Home Premium
• Windows Vista Home Premium/Home Basic Edition
• Windows XP Home Edition
C
14
Y
P
O
Selecting the Communication Method and LAN Type
• EOSUtility
Select this option for remote capture over a wired LAN using the EOS
Utility software included with your camera.
In addition to remote capture, all camera operations in EOS Utility are
supported. With this option, a wired network is used instead of the USB
cable.
Requires a computer with EOS Utility (software included with
EOS-1D X cameras) installed.
• WFTserver
Select this option for remote capture over a wired LAN with the
EOS-1D X acting as a server.
Additionally, images on a memory card in the camera can be viewed
and downloaded to a computer.
The camera can be accessed in the same way as browsing a web
page, by users at up to three computers.
Y
P
O
Computer Operating Systems
Any computer with a web browser can be used, regardless of the
operating system.
Devices other than computers that feature a web browser can also
be used. However, if the web browser does not support JavaScript,
WFT Server functions will be limited. Also note that devices with
limited performance may display images more slowly, and
downloading images to these devices may not be possible.
C
• MediaServ.
Select this option to view images on a memory card in the camera over
a wired LAN on a television.
This function requires a DLNA-compatible television, digital photo
frame, or similar media player.
15
Selecting the Communication Method and LAN Type
Selecting the LAN Type
Make sure [Wired] is selected, and
then press <0>.
Select [OK] and press <0> to go to
the next screen.
C
16
Y
P
O
Configuring Network Settings
Turn the <5> dial to select a
configuration method for the network
settings, and then press <0>.
Select [OK] and press <0> to go to
the next screen.
[Auto setting]
Settings otherwise configured with [Manual setting] can be
configured automatically. However, in environments using DHCP
servers or routers supporting DHCP server functions, the IP address
and similar settings must be assigned and configured automatically.
If an error is displayed, select [Manual setting] regardless of
whether the IP address and similar settings are automatically
assigned and configured.
[Manual setting]
Y
P
O
The [IP address set.] screen is displayed
after you select [Manual setting]. If [Auto
setting] results in an error, select [Manual
setting]. The IP address you enter must be
the IP address assigned to the camera.
Enter the [IP address], [Subnet mask],
[Gateway], and [DNS address] on each
screen as they are displayed.
If you are not sure what to enter, see page 97, “Checking Network
Settings,” or ask the network administrator or another person
knowledgeable about the network.
C
When entering numbers for the IP
address, subnet mask, and so on, press
<0> to move the input position and turn
the <5> dial to enter the number.
17
Configuring Network Settings
Completing Settings for the Communication Method
The following instructions are for setting screens that vary depending
on the communication method (FTP Transfer, EOS Utility, WFT Server,
or Media Server), as shown below. Read the page that describes the
selected communication method.
FTP trans.
Chapter 2 (p.21)
EOSUtility
Y
P
O
Chapter 3 (p.43)
C
Windows 7 and Windows Vista Users
Before performing the operations described from page 43, perform the
operations below. If these operations are not performed, the WFT Pairing
Software described on page 44 may not start.
Open the [C Drive] [Program Files] [Canon] [EOS Utility] [WFTPairing] folder (in this order), and then double-click the [WFT
FirewallSettings] icon.
After performing this operation, perform the operations described from
page 43.
18
Configuring Network Settings
WFTserver
Chapter 4 (p.49)
MediaServ.
Chapter 5 (p.65)
C
Y
P
O
19
Configuring Network Settings
Virtual Keyboard Operation
The virtual keyboard is displayed when entering the server name and
other information.
Switching between input areas
To switch between input areas, press the
<Q> button.
Moving the cursor
To move the cursor, turn the <5> dial.
You can also move the cursor using
<9>.
Entering text
Y
P
O
In the bottom input area, turn the <5>
dial to move the cursor and press <0>
to enter text.
You can also move the cursor using
<9>.
You can check how many characters you
have entered by referring to [*/32] in the
upper-right corner of the screen.
C
Deleting text
If you make a mistake, press the <L>
button to erase characters.
Confirming entries
Press the <7> button to confirm
what you have entered and go to the
next screen.
Canceling entries
Press the <6> button to erase the
entry and return to the previous screen.
20
2
Transferring Images
to an FTP Server
Y
P
O
With FTP transfer, you can automatically transfer each
image to the FTP server as you shoot or transfer
images in batches after shooting.
C
21
Configuring FTP Communication Settings
These instructions are continued from Chapter 1.
1
Turn the <5> dial to select [Address
setting], and then press <0>.
2
If you set the DNS server setting to
[Disable], the screen on the left is
displayed.
Press <0> to select the input
position, and then turn the <5> dial
to enter the IP address of the FTP
server.
If you set the DNS server IP address
setting to [Auto assign] or [Manual
setting], the screen on the left is
displayed.
For instructions on screen operations,
see “Virtual Keyboard Operation”
(p.20).
Enter the FTP server’s server name
or IP address.
C
3
22
Y
P
O
In [Port number setting], enter
00021, in most cases.
Turn the <5> dial to select [OK], and
then press <0> to go to the next
screen.
Configuring FTP Communication Settings
4
Complete the [Passive mode]
settings.
If an Error 41 (“Cannot connect to
FTP server”) is displayed in step 8,
setting [Passive mode] to [Enable]
may resolve it.
5
Complete the [Proxy server]
settings.
Turn the <5> dial to select [OK], and
then press <0> to go to the next
screen.
6
C7
Y
P
O
Complete the [Login method]
settings.
Turn the <5> dial to select [OK], and
then press <0> to go to the next
screen.
Complete the [Target folder]
settings.
Select [Root folder] to save images
in the root folder as specified in FTP
server settings (p.42).
Select [Select folder] to specify a
subfolder in the root folder. If no folder
exists, a folder will be created
automatically.
Turn the <5> dial to select [OK], and
then press <0> to connect to the
FTP server.
23
Configuring FTP Communication Settings
8
On the confirmation screen displayed
next, select [OK] and press <0>.
X The <Y> lamp on the camera
lights up green.
9
Press <0> and turn the <5> dial to
select the set number, and then press
<0>.
Turn the <5> dial to select [OK], and
then press <0>. After the
connection wizard closes, the display
will return to the menu screen.
C
Y
P
O
The network settings for FTP transfer are now complete.
During image transfer, the <Y> lamp on the camera blinks green.
24
Automatic Image Transfer After Each Shot
An image can be automatically transferred to the FTP server
immediately after shooting. You can continue still photo shooting even
while images are being transferred.
Before shooting, be sure to insert a memory card in the camera. If you
shoot without recording images, they will not be transferred.
Note that automatic transfer of movies is not supported. Transfer
movies after shooting, as described on pages 30-38.
1
Select [Communication settings].
Y
P
O
2 Select [Network settings].
C3
Once [Communication func] is set
to [Enable], you can select [Network
settings].
Select [Set up].
25
Automatic Image Transfer After Each Shot
[Automatic transfer].
4 Select
Select [Enable].
the picture.
5 Take
X The captured images are transferred
to the FTP server.
Number of Possible Shots
Approx. number of shots
Normal Temperature
(23°C / 73°F)
950
C
Y
P
O
Low Temperature
(0°C / 32°F)
740
* Using a fully charged LP-E4N Battery Pack.
* [LAN power save: Enable]
* Based on Camera & Imaging Products Association (CIPA) standards.
During continuous shooting, images are transferred to the FTP server in
the order they are captured.
The captured images are also stored on the memory card.
Any images for which transfer fails or is interrupted will be transferred
automatically when the connection is restored (p.28). These images can
also be transferred in batches manually at a later time (p.34).
26
Automatic Image Transfer After Each Shot
Setting the Size or Type of Images to Transfer
With automatic transfer, you can select which images to transfer when
recording images of different sizes to separate cards, or when recording
both RAW and JPEG images.
1
Select [Communication settings].
2 Select [Network settings].
Y
P
3 O
C
Once [Communication func] is set
to [Enable], you can select [Network
settings].
Select [Set up].
4 Select [Transfer type/size].
27
Automatic Image Transfer After Each Shot
the size and type of images
5 Select
to transfer.
To transfer smaller JPEGs when the camera is set up to record
larger JPEGs to one card and smaller JPEGs to the other, set [JPEG
size to trans.] to [Smaller JPEG].
To transfer either RAW or JPEG images when the camera is set up
to record RAW images to one card and JPEGs to the other, specify
which images to transfer in the [RAW+JPEG transfer] setting.
Similarly, complete the same setting when RAW+JPEG images are
recorded simultaneously to a single memory card.
Y
P
O
When images of the same size are recorded to both cards
simultaneously, images recorded to card 1 are transferred,
regardless of image quality (compression).
C
Auto Retry if Transfer Fails
If transfer fails, the <Y> lamp on the
camera blinks in red. In this case, press
the <7> button, select
[Communication settings] on the [53]
tab, and press <0>. When the screen
shown on the left is displayed, check the
error number and see page 84 to eliminate the cause of the error.
Once the cause of the error is eliminated, the images whose transfer
previously failed will be transferred automatically. With this option
activated, transfer is attempted again automatically after failure, both
when automatic transfer is used and when transferring captured images
via FTP. Note that when you cancel image transfer, or turn off the
camera, the image will not be re-transferred automatically. See page 34
and transfer the image manually.
28
Automatic Image Transfer After Each Shot
Enabling LAN Power Management
In the menu, select [Communication settings] [Network
settings] [Set up] [LAN power save].
When this option is set to [Enable], the camera will log off from the
FTP server after transfer and switch to standby mode. Wired
connectivity will be restored automatically when you attempt to
transfer images, and the camera will reconnect to the FTP server.
C
Y
P
O
29
Transferring Images Individually
Simply select an image and press <0> to transfer it. You can add a
caption before transferring the image. You can continue still photo
shooting even while images are being transferred.
Transferring the Current Image
1
Select [Communication settings].
[Network settings].
2 Select
Once [Communication func] is set
Y
P
O
to [Enable], you can select [Network
settings].
3 Select [Set up].
C
30
Transferring Images Individually
[Transfer with SET].
4 Select
Select [Enable].
the image.
5 Select
Press the <x> button on the
C
camera.
Select the image to transfer, and then
press <0> to transfer the image.
Movies cannot be transferred with
this function. If you select a movie
and press <0>, the movie
playback panel will be displayed.
Y
P
O
31
Transferring Images Individually
Adding a Caption Before Transfer
You can add a registered caption to each image before transfer. This is
convenient if you want to inform the recipient of the quantity to print, for
example. The caption is also added to images stored on the camera.
For instructions on creating and registering captions, see page
100.
You can check the captions added to images in the user comments
included in the Exif information.
1 Take the picture.
2 Select [Communication settings].
C
Y
P
O
[Network settings].
3 Select
Once [Communication func] is set
to [Enable], you can select [Network
settings].
32
Transferring Images Individually
[Transfer with caption].
4 Select
X The last captured image is displayed.
It is not possible to select other
images on the [Transfer with
caption] screen. To select another
image for transfer with a caption, play
back that image before following
these steps.
a caption.
5 Select
Turn the <5> dial to select the
C6
Y
P
O
[Caption] box, and then press <0>.
Turn the <5> dial to select the
caption content, and then press
<0>.
Transfer the image.
Turn the <5> dial to select
[Transfer], and then press <0>.
33
Batch Transfer
After shooting, you can select multiple images as desired and transfer
them all at once. You can transfer unsent images or images whose
transfer failed previously.
You can continue still photo shooting even while images are being
transferred.
Selecting Images to Transfer
1
On the [32] tab, select [Image
transfer].
Y
P
O
2 Select [Image sel./transfer].
C
3
Select [Sel.Image].
X An image is displayed.
34
Batch Transfer
images to transfer.
4 Select
Press <0> and turn the <5> dial to
display <X> in the upper left corner
of the images to transfer.
Press <0> to confirm your selection.
You can select up to 9,999 images.
To display three images per screen,
hold the <u> button and turn the
<6> dial left. To display one image
per screen, hold the <u> button and
turn the <6> dial right.
C5
Y
P
O
After selecting images to transfer,
press the <7> button.
Transfer the images.
Select [FTP transfer].
Select [OK] on the confirmation
screen displayed next.
X A transfer progress screen is
displayed.
35
Batch Transfer
[RAW+JPEG transfer] Options
Selecting [RAW+JPEG transfer] in step
2 on page 34 will give you the option of
transferring RAW images, JPEG images,
or both types of images.
The options will be the same whether
you specify [Sel. Image], [Sel. n], or
[All image] as the image selection
method.
Menu Operation During Image Transfer
You can use the menu even during image transfer. However, to prevent
transfer problems, some menu items are unavailable during transfer,
such as [Communication settings], [Protect images], [Erase
images], [Format card], and [Record func+card/folder sel.].
C
Y
P
O
If you shoot a movie during the image transfer of captured images, the
image transfer will be temporary cancelled during movie shooting.
Batch Transfer of Images in a Folder
1
On the [32] tab, select [Image
transfer].
2 Select [Image sel./transfer].
36
Batch Transfer
3 Select [Sel.n].
[Folder images not
4 Select
transfer’d].
To transfer images whose transfer
previously failed, select [Folder
images failed transf.].
Y
P
O
5 Select a folder.
C6
Transfer the images.
Select [FTP transfer].
Select [OK] on the confirmation
screen displayed next.
X A transfer progress screen is
displayed.
Selecting [Clear folder transf. history] will set the transfer history of
images in the selected folder to “unsent.” This enables you to resend all the
images in the folder later by selecting [Folder images not transfer’d].
37
Batch Transfer
Batch Transfer of Images on Memory Cards
1
On the [32] tab, select [Image
transfer].
2 Select [Image sel./transfer].
Y
P
O
3 Select [All image].
C
[Card images not
4 Select
transferred].
To transfer images whose transfer
previously failed, select [Card
images failed transfer].
38
Batch Transfer
the images.
5 Transfer
Select [FTP transfer].
Select [OK] on the confirmation
screen displayed next.
X A transfer progress screen is
displayed.
C
Y
P
O
Selecting [Clear card’s transf. history] will set the transfer history of
images on the memory card to “unsent.” This enables you to resend all the
images on the card later by selecting [Card images not transferred].
39
Checking Image Transfer History
Checking the Transfer History of Individual Images
To check the transfer history in [Image sel./transfer], select
[Sel.Image].
Image not selected for transfer
(no mark)
Image selected for transfer
Y
P
O
Image whose transfer failed
C
Image already transferred
40
Checking Image Transfer History
Checking the Transfer History of Memory Cards
On the [Image sel./transfer] screen, you
can check the number of images to be
transferred as well as the transfer history
of images in the memory card.
Specifically, you can check the number
of images classified as [Images failed
trans.] and [Images transferred].
C
Y
P
O
41
Viewing Transferred Images
Images transferred to the FTP server are stored in the following folder as
specified in the FTP server settings.
Windows
Under the default settings of the FTP server, images are stored in [C
drive] [Inetpub] folder [ftproot] folder, or in a subfolder of this
folder.
If the root folder of the transfer destination has been changed in the
FTP server settings, ask the FTP server administrator where images
are transferred.
Macintosh
Open the [Macintosh HD] [Users] folder. The folder where
images are stored is located in the folder of the user currently logged
in, or in a subfolder of this folder.
Folders for Image Storage
C
Y
P
O
Under default settings, transferred images will be stored in the root
folder specified in the FTP server settings, in a folder structure such as
A/DCIM/100EOS1D that is automatically created.
Additionally, when you have selected card 1 for recording and playback,
a folder structure such as “A/DCIM/100EOS1D” is automatically
created for image storage. For card 2, the folder structure is “B/DCIM/
100EOS1D”. (Images are stored separately, with card 1 images in
folder A and card 2 images in folder B.)
42
3
Remote Capture
Using EOS Utility
Y
P
O
You can use EOS Utility to shoot remotely over a wired
LAN.
As a wired network is used instead of the USB cable, all
camera operations (except firmware updates) in EOS
Utility are supported, in addition to remote capture.
C
The wired LAN functions cannot be used with the Mac version of
EOS Utility (as of November 2011).
Check the Canon website for the latest system requirements,
including supported OS versions.
43
Configuring EOS Utility Communication Settings
These instructions are continued from Chapter 1.
With EOS Utility, you can use the included WFT Pairing Software to
establish a connection between the camera and a computer.
WFT Pairing Software is installed automatically during easy installation
of the software provided with the camera. If it is not installed, install it on
the computer that will communicate with the EOS-1D X before this
procedure.
The configuration procedure below uses Windows 7 as an example.
1
First, the pairing screen is displayed.
Turn the <5> dial to select [OK].
When you press <0>, the following
message is displayed. ******
represents the last six digits of the
MAC address of the EOS-1D X you
are connecting.
C
44
Y
P
O
Configuring EOS Utility Communication Settings
Start the pairing software.
Normally, it is installed in the same
location as EOS Utility.
2
X When the pairing software starts up,
an icon is displayed in the task bar.
X When the camera is detected, a
message is displayed.
C
Y
P
O
45
Configuring EOS Utility Communication Settings
3
Double-click the pairing software
icon.
X Detected cameras are listed. If a
camera is already connected, it is not
displayed in the list.
Y
P
O
Click [Connect].
If multiple cameras are displayed,
identify the camera to connect to by
its [MAC address] or [IP address].
You can check the [MAC address]
and [IP address] by accessing
[Confirm settings] in the menu
(p.70).
C
4
46
When the camera detects the
computer on which you clicked
[Connect] in step 3, the message on
the left is displayed.
Turn the <5> dial to select [OK], and
then press <0>.
Configuring EOS Utility Communication Settings
5
Press <0> and turn the <5> dial to
select the set number, and then press
<0>.
After you turn the <5> dial to select
[OK] and press <0>, the connection
wizard closes and EOS Utility starts
up.
X The <Y> lamp on the camera
lights up green.
The EOS Utility network settings are now complete.
There is no need to complete pairing again if you continue using a
particular camera and computer together after pairing without
changing the settings.
When using this function the next time, simply turn on the camera
and start the pairing software. The connection between the camera
and computer will be established automatically.
You can add the pairing software to the software launched at startup
of your computer. In the [Preferences] [Basic Settings] tab in
EOS Utility, select [… Add WFT Pairing Software to the Startup
folder].
C
Y
P
O
47
Using EOS Utility
For EOS Utility instructions, refer to the Software Instruction Manual
(PDF). You can take full advantage of EOS Utility via the camera just as
via a USB connection, without restrictions.
C
Y
P
O
The motion of moving subjects may not be displayed smoothly depending
on the image transmission speed of the wired LAN.
48
4
Remote Capture
Using WFT Server
Y
P
O
Using a web browser, you can view images recorded on
a memory card in the camera and download them to a
computer.
Additionally, you can shoot remotely over a wired LAN.
Note that bulb, mirror lockup, and movie shooting are
not supported.
C
49
Configuring WFT Server Communication Settings
These instructions are continued from Chapter 1.
Press <0> and turn the <5> dial to
select the set number, and then press
<0>.
Press <0> again. After the
connection wizard closes, the display
will return to the menu screen.
X The <Y> lamp on the camera
lights up green.
Setting up an Account
C
Y
P
O
Enter a login name and password to access the camera from a
computer. The login name and password you specify here are used on
the computer when connecting to the camera.
1
50
Turn the <5> dial to select [Set up],
and then press <0>.
Configuring WFT Server Communication Settings
2
Turn the <5> dial to select [WFT
server settings], and then press
<0>.
3
Turn the <5> dial to select [WFT
account], and then press <0>.
When changing the port number, turn
the <5> dial to select [Port number]
and press <0>. Note that there is
normally no need to change the port
number (80).
4
C
5
Y
P
O
Select a user number.
With WFT Server, you can connect
the camera to up to three computers.
Select a user number to prevent
conflicts when users at other
computers are connected to the
camera simultaneously.
Turn the <5> dial to select [User *],
and then press <0>.
After you select [Login name] and
[Password], the following input
screen is displayed.
For instructions on input screen
operations, see “Virtual Keyboard
Operation” (p.20).
The WFT Server network settings are now complete.
51
Displaying WFT Server
In the web browser, display the WFT Server screen for EOS-1D X
operations. Make sure you have already established a connection
between the camera and computer.
1
Start the web browser.
First, start Internet Explorer or
another web browser.
the URL.
2 Enter
In the address bar, enter the IP
address assigned to the camera.
Press the <Enter> key.
the [Login name] and
3 Enter
[Password] settings.
Y
P
O
Enter the login name and password
as specified in the procedure on page
51. Click [OK] to display the WFT
Server screen.
Web browsers that support
JavaScript will display the screen on
the lower left in step 4.
Otherwise, a message is displayed
when JavaScript is not supported.
Choosing not to use JavaScript will
display the screen on the lower right
in step 4, with limited functions.
C
52
Displaying WFT Server
the language.
4 Select
Select a language at the bottom of
the screen.
JavaScript supported
C
JavaScript not supported
Y
P
O
If you don’t know the URL (IP address)
You can check the URL (IP address) by accessing [Confirm settings] in the
menu (p.70).
53
Viewing Images
You can browse the images recorded on the camera’s memory card.
1
Click [Viewer].
X The image viewing screen is
displayed.
the memory card.
2 Select
Click [CF1] or [CF2].
Click the [DCIM] folder and select the
folder containing the images.
C
54
Y
P
O
Viewing Images
an image.
3 Select
To view another image, click the
<
> buttons or jump to
other pages.
In JavaScript-compatible web
browsers, you can specify how many
thumbnails are shown per screen by
clicking the pull-down list in the
upper-right corner of the screen.
C
Y
P
O
55
Viewing Images
images to the
4 Download
computer.
Click a thumbnail.
X The image is displayed at a larger
size.
To download the image to your
computer, click <
>.
Click [Return] to return to the image
viewing screen.
C
Y
P
O
Although actual RAW images and movies are not displayed here, they
can be downloaded to the computer in the same way as JPEG images.
56
Remote Capture [Camera control]
Set up the camera for Live View shooting beforehand. Note that
remote capture of movies is not supported.
For web browsers that do not support JavaScript, see page 63,
“Remote Capture”.
1
Click [Camera control].
X The advanced capture screen is
displayed.
C
Y
P
O
57
Remote Capture [Camera control]
① ② ③④ ⑤ ⑥
⑫
⑬
⑲
⑭
⑦
⑧
⑨
⑩
⑪
⑮
⑯
⑰
① Battery check
② Drive mode
③ Number of possible shots
④ AF mode
⑤ Release button
⑥ AF/MF switch
⑦ Shutter speed
⑧ Aperture
⑨ ISO speed
⑩ Exposure compensation
⑱
C
Y
P
O
⑪ Quality
⑫ Shooting mode
⑬ White balance
⑭ Metering mode
⑮ Menu
⑯ Live View shooting button
⑰ Manual focus button
Live View image size switching
⑱ button
⑲ Live View image screen
* Items that cannot be set via WFT Server are shaded on the screen.
58
Remote Capture [Camera control]
the lens focus mode switch to
2 Set
<f>.
Click the release button (⑤). When
you let go of the button, the camera
autofocuses and the picture is taken.
With One-Shot AF, the picture is not
taken if focus is not achieved. Display
the Live View image and focus
manually as described in the next
steps.
the Live View image.
3 Display
Click the Live View shooting button
⑯
⑱
(⑯).
X The AF/MF switch (⑥) is set to
<g>, and the Live View image is
displayed.
If the Live View image is not
displayed, enable Live View shooting
in the menu (⑮).
To make the Live View image display
more responsive, click the Live View
image size switching button (⑱). The
Live View image will be displayed at a
smaller size, improving
responsiveness. To restore the
original size, click this button again.
C
Y
P
O
59
Remote Capture [Camera control]
adjust the focus.
4 Manually
Click the buttons <
>, <
>,
<
>, <
>, <
>, and <
> to
adjust the focus. Note that autofocus is not
supported during the Live View image
display.
To focus closer, click <
>, <
>, or
<
>. To focus farther away, click
<
>, <
>, or <
>.
Three levels of focus adjustment are
available.
<
><
> : Largest increment
<
><
> : Intermediate increment
<
><
> : Smallest increment
Y
P
O
the shooting functions.
5 Configure
Click items such as quality to view
and configure their settings.
Complete the settings as needed.
C
6 TakeClickthethepicture.
release button (⑤). When you
let go of the button, the picture is taken.
X The captured image will be displayed.
Captured images are stored on the
camera’s memory card.
To download images to your
computer, see page 54, and use the
[Viewer] function.
The Live View image may freeze when shooting if the camera is accessed
by multiple computers.
60
Remote Capture [Simple control]
Set up the camera for Live View shooting beforehand. Note that
remote capture of movies is not supported.
For web browsers that do not support JavaScript, see page 63,
“Remote Capture.”
1
Click [Simple control].
X The basic capture screen and the
Live View image are displayed.
Y
P
O
Live View image screen
C
Manual focus button
<
><
><
>:
Focuses closer
<
><
><
>:
Focuses farther away
Release button
Levels of focus adjustment
<
><
<
><
<
><
> : Largest
increment
> : Intermediate
increment
> : Smallest
increment
61
Remote Capture [Simple control]
adjust the focus.
2 Manually
Set the lens focus mode switch to
<f>.
Click the buttons <
<
>, <
>, <
to adjust the focus.
>, <
>,
>, and <
>
3 TakeClickthethepicture.
release button. When you
let go of the button, the picture is
taken.
X The captured image is now displayed.
Captured images are stored on the
camera’s memory card.
To download images to your
computer, see page 54, and use the
[Viewer] function.
C
62
Y
P
O
Remote Capture
The following instructions are for remote capture with web
browsers that do not support JavaScript.
Set up the camera for Live View shooting beforehand. Note that
remote capture of movies is not supported.
1
Screen
Release button
Click [Capture].
X The capture screen is displayed.
The Live View image is not displayed.
picture.
2 TakeSetthe
the lens focus mode switch to
Y
P
O
<g>. Adjust the focus on the
camera.
Click the release button. When you
let go of the button, the picture is
taken.
X The captured image will be displayed.
Captured images are stored on the
camera’s memory card.
C
63
Remote Capture
images to the
3 Download
computer.
Click the image.
X The image is displayed at a larger
size.
To download the image to your
computer, click <
>.
Click [Return] to return to the capture
screen.
C
Y
P
O
Although actual RAW images are not displayed here, they can be
downloaded to the computer in the same way as JPEG images.
64
5
Using the Camera
as a Media Server
Y
P
O
Images on a memory card in the camera can be viewed
over a wired LAN on a television.
This function requires a DLNA*-compatible television,
digital photo frame, or similar media player.
(Subsequently, this equipment is collectively referred to
as the media player.)
C
* DLNA: Digital Living Network Alliance
65
Configuring Media Server Communication Settings
These instructions are continued from Chapter 1.
Press <0> and turn the <5> dial to
select the set number, and then press
<0>.
Press <0> again. After the
connection wizard closes, the display
will return to the menu screen.
Y
P
O
The media server network settings are now complete.
C
66
Displaying Captured Images on a Television
Operate the media player controls to display images recorded on the
camera’s memory card on a television. Note that RAW images and
movies cannot be displayed.
The following operations are performed on the media player. For
details, refer to the instruction manual for the media player.
1
Display the media player setting
screen on your television.
Using the media player functions,
display the <
EOS1D> (media
server) icon on the television.
A different icon may be displayed,
depending on the media player. In
that case, locate the icon labeled
EOS1D.
C
Y
P
O
67
Displaying Captured Images on a Television
EOS1D
the <
2 Select
server) icon.
EOS1D> (media
Selecting the <
EOS1D> icon will
display an icon of the memory card.
After you select this icon, you can
select folders and images.
Select an image to display it at a
larger size on the television. For
details, refer to the instruction manual
for the media player.
IMG_0001.JPG
02/28/2012
EOS 1D
CF
02/28/2012
100EOS1D
02/28/2012
C
1-100
02/28/2012
Y
P
O
IMG_0002.JPG
IMG_0003.JPG
Information overlay and details displayed on the television vary
depending on the media player. Note that depending on the media
player, image information may not be displayed.
Icons labeled 1-100 (for example) contain images grouped by file
number in the selected folder (***EOS1D).
Date information shown for images is based on Exif information added to
the images.
Date information shown for memory cards or folders may be the current
date set on the camera, in some cases.
68
6
Managing
Settings Information
C
Y
P
O
69
Checking Settings
Check the network settings as follows.
1
Select [Communication settings].
[Network settings].
2 Select
Once [Communication func] is set
to [Enable], you can select [Network
settings].
3 Select [Set up].
C
4
70
Y
P
O
Select [Confirm settings].
X The settings are displayed.
Checking Settings
Example of FTP transfer and wired LAN settings
C
Y
P
O
71
Changing Settings
Settings originally completed using the connection wizard can be
changed as follows. You can also change IP security settings (IPsec)
that cannot be set using the connection wizard, as well as other
settings, such as when an image with the same file name as an existing
file is sent to the FTP server (p.73).
1
Select [Communication settings].
[Network settings].
2 Select
Once [Communication func] is set
Y
P
O
to [Enable], you can select [Network
settings].
3 Select [Set up].
C
4 Select [LAN settings].
72
Changing Settings
the settings number.
5 Select
Select the settings number that
identifies the LAN settings.
[Change].
6 Select
After selecting [Change settings
name], you can rename and change
the settings.
Y
P
O
the item to change.
7 Select
Select the desired item from [LAN
C
type], [TCP/IP], or [FTP server], and
change the setting.
IP Security (IPsec)
Configured in [TCP/IP] [Security].
IPsec is a set of standards for encrypted communication over the
Internet. It provides effective security for both wireless and wired LANs.
To use this function, you must enable IPsec in the network settings of
your computer. When IPsec is employed, only transport mode is
supported, and 3DES or AES encryption and SHA1 authentication are
used. Note that the IP address of the computer for communication with
the camera must be entered in [Destination address] on the settings
screen.
73
Changing Settings
Directory Structure of the Target Folder
Configured in [FTP server] [Directory structure].
Selecting [Camera] automatically creates a folder structure matching
that of the camera’s (such as A/DCIM/100EOS1D) in the server’s root
folder for image storage. If you have created a subfolder in the root
folder by changing the [Target folder] setting, a folder structure such as
A/DCIM/100EOS1D is automatically created in that folder for image
storage.
Selecting [Default] will use the root folder for image storage. If you have
created a subfolder in the root folder by changing the [Target folder]
setting, images are saved in that folder.
Overwriting Files of the Same Name
Y
P
O
Configured in [FTP server] [Overwrite same file].
When the camera is configured to prevent overwriting
If there is already a file of the same name in the target folder on the FTP
server, a suffix consisting of an underscore and a number is appended
to the new file’s name. For example: IMG_0003_1.JPG.
C
When you resend images if initial transfer fails
Even if the camera is configured to overwrite files of the same name, if
you resend an image file that could not be transferred initially, the
existing file may not be overwritten in some cases. If this happens, a
suffix consisting of an underscore, a letter, and a number is appended
to the new file’s name. For example: IMG_0003_a1.JPG.
74
Changing Settings
Passive Mode
Configured in [FTP server] [Passive mode].
Enable this setting in network environments protected by a firewall. If an
Error 41 occurs (“Cannot connect to FTP server”), setting passive mode
to [Enable] may enable access to the FTP server.
Preventing Changes to Settings
To prevent accidental changes to LAN
settings, set [Protect settings] to [On].
C
Y
P
O
75
Saving and Loading Settings
Network settings can be saved on a memory card for use with other
cameras.
Saving Settings
1
Select [Communication settings].
[Network settings].
2 Select
Once [Communication func] is set
to [Enable], you can select [Network
settings].
Y
P
O
3 Select [Set up].
C
4 Select [LAN settings].
76
Saving and Loading Settings
the settings number.
5 Select
Select the settings number that
identifies the LAN settings.
6 Select [Change].
Y
P
O
7 Select [Save settings].
C8
Select [Save].
X The settings are now saved as a file
on the memory card.
The settings are saved as a file
(WFTNPF**.NIF) in the area of the
memory card shown when the card is
opened (in the root directory).
The file name is determined
automatically by the camera:
WFTNPF, followed by a number (01
to 99) and the extension NIF. You can
rename the file as desired by
selecting [Change file name].
77
Saving and Loading Settings
Loading Settings
Load settings files stored on a memory card as follows.
Make sure the settings file is saved in the folder shown when the
memory card is opened (that is, the root directory).
1
Select [Load settings].
the settings file.
2 Select
X Select a settings file that matches
Y
P
O
your network environment.
C
the settings file.
3 Load
X Information from the settings file is
loaded into the selected settings
number.
78
7
Synchronizing the
Camera Time
Y
P
O
Set the master camera time on up to 10 slave cameras,
as needed. Note that even after synchronization, there
will be a slight margin of error between master and
slave camera time of ±0.05 seconds, at most.
Slave camera
C
LAN cable
Master camera
Slave camera
Hub
LAN cable
Master camera
79
Synchronizing the Time
Steps 1–5 are the same on master and slave cameras.
Connect the EOS-1D X cameras to each other with a LAN cable. When
there are multiple slave cameras, connect them to a hub with LAN
cables, and connect the hub to the master camera with a LAN cable.
1
On the [53] tab, select
[Communication settings].
[Network settings].
2 Select
Once [Communication func] is set
Y
P
O
to [Enable], you can select [Network
settings].
[Communication mode] to
3 Set
[Disconnect].
C
Once [Communication mode] is set
to [Disconnect], you can select
[Sync time between cameras].
80
Synchronizing the Time
[Sync time between
4 Select
cameras].
X Select [OK] on the next screen
displayed, shown below.
[Wired].
5 Select
After selecting [Wired], select [OK].
Steps up to this point are the same on
master and slave cameras.
Y
P
C6 O
Set up the master camera.
After configuring the master camera
settings following steps 1–5, select
[Master].
X When the next screen is displayed,
the master camera is ready. Go to
step 7 to set up the slave cameras.
81
Synchronizing the Time
up the slave cameras.
7 SetAfter
configuring the slave camera
settings following steps 1–5 on the
preceding pages, select [Slave].
X Select [OK] on the next screen
displayed, shown below.
To set the time on multiple slave
cameras, follow these steps on each
slave camera. The master camera
screen shown in step 8 indicates the
number of slave cameras.
C
Y
P
O
the master camera, select
8 On
[OK].
Check the number of slave cameras,
and then select [OK].
X The time on slave cameras is now
synchronized to the master camera
time.
Select [OK] to return to the [Network
settings] screen.
82
8
Troubleshooting
C
Y
P
O
83
Handling Error Messages
If wired LAN errors are displayed on the camera LCD monitor, refer to
the examples of corrective actions in this chapter to eliminate the cause
of the error. In case of errors, the <Y> lamp on the camera blinks.
The error details can also be checked on the [53] tab under
[Communication settings] [Network settings] [Error description].
11 (p.85)
12 (p.85)
21 (p.85)
22 (p.86)
23 (p.87)
24 (p.88)
25 (p.89)
41 (p.91)
42 (p.93)
43 (p.93)
44 (p.94)
45 (p.94)
46 (p.95)
47 (p.95)
26 (p.89)
73 (p.96)
81 (p.96)
91 (p.96)
Y
P
O
If [Waiting to retry transfer…] is displayed
C
If image transfer via FTP fails after
shooting, the screen on the left is
displayed, and the camera’s <Y>
lamp blinks in red. Check the error
number and eliminate the cause of the
error.
Once the cause of the error is eliminated, the images whose transfer
previously failed will be transferred automatically.
Note that if you cancel image transfer or turn off the camera, auto retry
is not performed. Follow the steps on page 34 to transfer the images.
84
Handling Error Messages
11: Connection target not found
Is the pairing software running?
X Start the pairing software and follow the instructions to re-establish the
connection (p.44).
12: Connection target not found
Is the target computer on?
X Turn on the target computer.
21: No address assigned by DHCP server
What to check on the camera
Is the camera’s network setting set to [Auto setting], or its IP
address setting set to [Auto assign]?
X If you are not using a DHCP server, set the camera’s network setting
to [Manual setting] and IP address setting to [Manual setting] (p.17).
C
Y
P
O
What to check on the DHCP server
Is the DHCP server on?
X Turn the DHCP server on.
Are there enough addresses for assignment by the DHCP server?
X Increase the number of addresses assigned by the DHCP server.
X Remove devices assigned addresses by the DHCP server from the
network to reduce the number of addresses in use.
85
Handling Error Messages
Is the DHCP server functioning correctly?
X Check the DHCP server settings to make sure it is functioning
correctly as a DHCP server.
X If applicable, ask your network administrator to ensure that the DHCP
server can be used.
22: No response from DNS server
What to check on the camera
Is the camera’s network setting set to [Auto setting], or its IP
address setting set to [Auto assign]?
X If you are not using a DNS server, set the camera’s DNS address
setting to [Disable] (p.17).
On the camera, does the DNS server’s IP address setting match
the server’s actual address?
X Configure the IP address on the camera to match the actual DNS
server address (p.17, 97).
C
Y
P
O
What to check on the DNS server
Is the DNS server on?
X Turn the DNS server on.
Are the DNS server settings for IP addresses and the
corresponding names correct?
X On the DNS server, make sure IP addresses and the corresponding
names are entered correctly.
86
Handling Error Messages
Is the DNS server functioning correctly?
X Check the DNS server settings to make sure the server is functioning
correctly as a DNS server.
X If applicable, ask your network administrator to ensure that the DNS
server can be used.
What to check on the network as a whole
Does your network include a router or similar device that serves
as a gateway?
X If applicable, ask your network administrator for the network gateway
address and enter it on the camera (p.17, 97).
X Make sure the gateway address setting is correctly entered on all
network devices, including the camera.
Y
P
O
23: Duplicate IP address
What to check on the camera
Is another device on the camera network using the same IP
address as the camera?
X Change the camera’s IP address to avoid using the same address as
another device on the network. Otherwise, change the IP address of
the device that has a redundant address.
X In network environments with a DHCP server, if the camera’s IP
address setting is [Manual setting], change it to [Auto assign] (p.17).
C
87
Handling Error Messages
24: No response from proxy server
What to check on the camera
The camera’s proxy server setting is [Enable]. Does the error
occur under this setting?
X If you are not using a proxy server, set the camera’s proxy server
setting to [Disable] (p.23).
Do the camera’s [Address setting] and [Port No.] settings match
those of the proxy server?
X Configure the camera’s proxy server address and port number to match
those of the proxy server (p.22).
In the camera’s [Proxy server] settings, have you only entered
[Server name]?
X If the proxy server’s [Address] setting is not configured on the
camera, enter it along with the DNS server address (p.17). Make sure
the server name and port number for the proxy server are entered
correctly (p.22).
C
Y
P
O
What to check on the proxy server
Is the proxy server on?
X Turn the proxy server on.
Is the proxy server functioning correctly?
X Check the proxy server settings to make sure the server is functioning
correctly as a proxy server.
X If applicable, ask your network administrator for the proxy server
address or server name and port number, and then enter them on the
camera.
88
Handling Error Messages
What to check on the network as a whole
Does your network include a router or similar device that serves
as a gateway?
X If applicable, ask your network administrator for the network gateway
address and enter it on the camera.
X Make sure the gateway address setting is correctly entered on all
network devices, including the camera.
25: Another terminal has set the same IP address
Is another device on the camera network using the same IP
address as the camera?
X This error occurs if the camera is connected to a network where
another device subsequently connects with the same IP address.
Change the camera’s IP address to avoid using the same address as
another device on the network. Otherwise, change the IP address of
the device that has a redundant address.
C
Y
P
O
26: No response from DHCP server
What to check on the camera
On the camera, the network setting is [Auto setting]. Does the
error occur under this setting?
X If you are not using a DHCP server, set the camera’s network setting
to [Manual setting] (p.17).
89
Handling Error Messages
What to check on the DHCP server
Is the DHCP server on?
X Turn the DHCP server on.
Are the DHCP server settings for IP addresses and the
corresponding names correct?
X On the DHCP server, make sure IP addresses and the corresponding
names are entered correctly.
Is the DHCP server functioning correctly?
X Check the DHCP server settings to make sure it is functioning
correctly as a DHCP server.
X If applicable, ask your network administrator to ensure that the DHCP
server can be used.
Y
P
O
What to check on the network as a whole
Does your network include a router or similar device that serves
as a gateway?
X If applicable, ask your network administrator for the network gateway
address and enter it on the camera (p.17).
X Make sure the gateway address setting is correctly entered on all
network devices, including the camera.
C
90
Handling Error Messages
41: Cannot connect to FTP server
What to check on the camera
On the camera, does the FTP server’s IP address setting match
the server’s actual address?
X Configure the IP address on the camera to match the actual FTP
server address (p.22).
On the camera, does the [Port number setting] for the FTP server
match the actual port number of the FTP server?
X Configure the same port number (usually 21) on the camera and FTP
server. Configure the port number on the camera to match the actual
FTP server port number (p.22).
If only the FTP server’s [Server name] is configured on the
camera, are the DNS server settings complete?
X If the FTP server’s [Address] setting is not configured on the camera,
enable use of the DNS server on the camera and enter its address
(p.17). Make sure the FTP server name is entered correctly (p.22).
C
Y
P
O
What to check on the FTP server
Is the FTP server functioning correctly?
X Configure the computer correctly to function as an FTP server.
X If applicable, ask your network administrator for the FTP server
address and port number, and then enter them on the camera.
91
Handling Error Messages
Is the FTP server on?
X Turn the FTP server on. The server may have been turned off because
of an energy-saving mode.
On the camera, does the FTP server’s IP address setting (in
[Address]) match the server’s actual address?
X Configure the IP address on the camera to match the actual FTP
server address (p.22).
Is a firewall or other security software enabled?
X Some security software uses a firewall to restrict access to the FTP
server. Change the firewall settings to allow access to the FTP server.
X You may be able to access the FTP server by setting [Passive mode]
to [Enable] on the camera (p.75).
Are you connecting to the FTP server via a broadband router?
X Some broadband routers use a firewall to restrict access to the FTP
server. Change the firewall settings to allow access to the FTP server.
X You may be able to access the FTP server by setting [Passive mode]
to [Enable] on the camera (p.75).
C
92
Y
P
O
Handling Error Messages
If you are using Windows XP Service Pack 2 or later, is access to
the FTP server blocked by [Windows Firewall]?
X Change the Windows Firewall settings to allow access to the FTP
server.
What to check on the network as a whole
Does your network include a router or similar device that serves
as a gateway?
X If applicable, ask your network administrator for the network gateway
address and enter it on the camera (p.17).
X Make sure the gateway address setting is correctly entered on all
network devices, including the camera.
42: FTP server rejected connection
What to check on the FTP server
Y
P
O
Is the FTP server configured to restrict access to only some IP
addresses?
X Change the FTP server settings to allow access from the [IP address]
configured on the camera in the TCP/IP settings.
C
43: Cannot connect to FTP server. Error code received
from server.
What to check on the FTP server
Have you exceeded the maximum number of FTP server
connections?
X Disconnect some network devices from the FTP server or increase the
maximum number of connections.
93
Handling Error Messages
44: Cannot disconnect FTP server. Error code received
from server.
This error occurs if the camera fails to disconnect from the FTP
server for some reason.
X Turn the FTP server and camera off and on.
45: Cannot login to FTP server. Error code received from
server.
What to check on the camera
On the camera, is the [Login name] entered correctly?
X Check the login name for accessing the FTP server. The setting is
case-sensitive, so check upper- and lower-case characters. Make sure
the correct login name is entered on the camera (p.23).
Y
P
O
On the camera, is the [Login password] entered correctly?
X If a login password is configured on the FTP server, check the upperand lower-case characters to make sure the password on the camera
matches it (p.23).
C
What to check on the FTP server
Do the user rights for the FTP server allow reading, writing, and
log access?
X Configure the FTP server’s user rights to allow reading, writing, and
log access.
Is the folder specified as the transfer destination on the FTP
server named with ASCII characters (p.20)?
X Use ASCII characters for the folder name.
94
Handling Error Messages
46: For the data session, error code received from FTP
server
What to check on the FTP server
The connection was terminated by the FTP server.
X Restart the FTP server.
Do the user rights for the FTP server allow reading, writing, and
log access?
X Configure the FTP server’s user rights to allow reading, writing, and
log access.
Do user rights allow access to the target folder on the FTP
server?
X Configure the user rights for access to the target folder on the FTP
server to allow saving images from the camera.
Y
P
O
Is the FTP server on?
X Turn the FTP server on. The server may have been turned off because
of an energy-saving mode.
C
Is the hard disk of the FTP server full?
X Increase available space on the hard disk.
47: Image file transfer completion not confirmed by FTP
server
This error occurs if, for some reason, the camera fails to receive
confirmation from the FTP server that image file transfer is
complete.
X Turn the FTP server and camera off and on and transfer the images
again.
95
Handling Error Messages
73: Could not synchronize the time
Are you following the correct procedure to establish a connection
between the master and slave cameras?
X Operate the master and slave cameras by following the correct
instructions (p.80-82).
81: Wired LAN connection lost
Is the LAN cable securely connected?
X Reconnect the LAN cable between the camera and server. Because
the cable may be severed, try using another cable to connect the
devices.
Is the hub or router on?
X Turn on the hub or router.
Y
P
O
Is the server on?
X Turn the server on. The server may have been turned off because of
an energy-saving mode.
91: Other error
C
An error other than error number 11 to 81 has occurred.
X Turn the camera’s power switch off and on.
.
96
Checking Network Settings
Windows
Click the Windows [Start] button [All Programs] [Accessories] [Command Prompt]. Type ipconfig/all and press the <Enter> key.
The IP address assigned to the computer is displayed, as well as the
subnet mask, gateway, and DNS server information.
To avoid using the same IP address for the computer and other devices
on the network when configuring the IP address assigned to the camera
(page 17), change the rightmost numbers here.
Macintosh
In Mac OS X, open the [Terminal] application, type ifconfig -a, and
press the <Return> key. The IP address assigned to the computer is
indicated in the [en0] item by [inet], in the format ***.***.***.***.
To avoid using the same IP address for the computer and other devices
on the network when configuring the IP address assigned to the camera
(page 17), change the rightmost numbers here.
* For information on the [Terminal] application, refer to the Mac OS X
help.
C
Y
P
O
97
C
98
Y
P
O
9
Reference
C
Y
P
O
99
Creating and Registering Captions
Follow these steps to create captions and register them on the camera,
as described in “Adding a Caption Before Transfer” (p.32). When
creating and registering captions, use a computer on which EOS Utility
is installed.
Before you start, use the USB cable provided with the camera to
connect the camera to the computer. For instructions on connecting
the camera to the computer with the USB cable and starting EOS Utility,
refer to the Software Instruction Manual (PDF) provided with the
camera.
1
Start EOS Utility and select
[Camera settings/Remote
shooting].
X The camera settings/
remote capture screen is
displayed.
C
Y
P
O
the [ ] tab, select [WFT
2 On
Captions].
X The screen for caption creation is
displayed.
To acquire caption data stored on the
camera, select [Load settings].
100
Creating and Registering Captions
the captions.
3 Enter
Enter up to 31 characters (in ASCII
format).
the captions on the
4 Register
camera.
Select [Apply to camera] to register
your new captions on the camera.
C
Y
P
O
101
MEMO
C
102
Y
P
O
MEMO
C
Y
P
O
103
MEMO
C
104
Y
P
O
MEMO
C
Y
P
O
105
MEMO
C
106
Y
P
O
MEMO
C
Y
P
O
107
MEMO
C
108
Y
P
O
MEMO
C
Y
P
O
109
MEMO
C
110
Y
P
O
MEMO
C
Y
P
O
111
MEMO
C
112
Y
P
O
MEMO
C
Y
P
O
113
Index
A
J
Account...........................................50
Authentication .................................73
Auto power off.................................12
B
Batch transfer .....................34, 36, 38
Browser...........................................52
C
Camera control ...............................57
Caption ...........................................32
Connection......................................12
D
DHCP server...................................17
Digital photo frame..........................65
DLNA ..............................................65
DNS address ..................................17
DNS server .....................................22
E
C
Encryption.......................................73
EOS Utility ................................43, 48
EOSUtility .......................................15
Error................................................84
F
File of same name ..........................74
Folder........................................23, 42
FTP server ......................................21
FTP trans. .......................................14
G
Gateway..........................................17
I
Image transfer.................................21
IP address.................................17, 22
IPsec...............................................73
114
JPEG.............................................. 27
K
Keyboard........................................ 20
L
Login .............................................. 23
Login name .................................... 50
M
MAC address ................................. 44
Master camera ............................... 81
Media player................................... 65
Media Server.................................. 65
MediaServ. ..................................... 15
Movie.................................. 25, 56, 57
Y
P
O
N
Network ............................................ 9
Number of possible shots............... 26
P
Pairing ...................................... 18, 44
Passive mode................................. 75
Password ....................................... 50
Port number ................................... 22
Protect settings .............................. 75
Proxy .............................................. 23
R
RAW ............................................... 27
RAW+JPEG ................................... 28
Remote capture...... 43, 49, 57, 61, 63
Router ............................................ 17
S
Select folder ................................... 23
Settings information ....................... 69
Simple control ................................ 61
Slave camera ................................. 82
Index
Storage ...........................................42
Subnet mask ...................................17
Synchronizing camera time.............79
T
Target ..............................................23
Target folder ....................................74
Television ..................................65, 67
Transfer after shooting ....................34
Transfer history ...............................40
Transfer with SET ...........................31
Transferred images .........................42
Transferring images, automatic ......25
Transferring images, individual
images ............................................30
Troubleshooting ..............................83
U
Y
P
O
URL.................................................52
V
C
Viewing images...............................54
W
Web.................................................52
WFT Server.....................................49
WFTserver.......................................15
Wired LAN.......................................16
Wizard.............................................12
115
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
U.S.A.
CANON U.S.A. INC.
One Canon Plaza, Lake Success, NY 11042-1198, U.S.A.
For all inquires concerning this product, call toll free in the U.S.
1-800-OK-CANON
CANADA
CANON CANADA INC. HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada
CANON CANADA INC. MONTREAL BRANCH
5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada
CANON CANADA INC. CALGARY OFFICE
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada
For all inquiries concerning this product, call toll free in Canada
1-800-OK-CANON
EUROPE,
AFRICA &
MIDDLE EAST
CANON EUROPA N.V.
Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands
CANON FRANCE S.A.S.
17,Quai du Président Paul Doumer, 92414 Courbevoie Cedex, France
CANON UK LTD.
Woodhatch Reigate,Surrey RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano 8, 20097 San Donato Milanese, (MI), Italy
CANON Schweiz A.G.
Industriestrasse 12, 8305 Dietlikon, Switzerland
Canon GmbH
Zetschegasse 11, A-1230 Vienna, Austria
CANON España,S.A.
Av. De Europa,6 Alcobendas 28108 Madrid, Spain
CANON Portugal S.A.
Rua Alfredo da Silva,14 Alfragide 2610-016 Amadora, Portugal
C
Y
P
O
CENTRAL &
SOUTH AMERICA
CANON LATIN AMERICA, INC.
703 Waterford Way, Suite 400 Miami, FL 33126,U.S.A.
ASIA
CANON (China) Co., LTD.
15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China
CANON HONGKONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632
CANON KOREA CONSUMER IMAGING INC.
Canon BS Tower 5F, #168-12 Samseong-dong, Gangnam-gu, Seoul, Korea
OCEANIA
CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
JAPAN
CANON MARKETING JAPAN INC.
16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan
This Instruction Manual booklet is current as of February 2012. For information on
the camera’s compatibility with any accessories and lenses introduced after this
date, contact any Canon Service Center.
CPX-E011-001
© CANON INC. 2012
Wired LAN Instruction Manual
E
INSTRUCTION
MANUAL