Motorola CABLE MODEM SB6100J - GUIDE Technical information

RPW MOTORCYCLE
ACCESSORIES
Home of Marsee Products and
Helen Twowheels Super Packing System
2011
2012
Direct from our 10,000 square foot warehouse to you at the Guaranteed Lowest Prices!
1-800-397-7815
www.racerpartswholesale.com
www.helen2wheels.com
www.marseeproducts.com
Table of Contents
Please Note: There are no prices in this catalog. We generally do not like
catalogs without pricing, however we are constantly working with our product suppliers
and manufacturing facilities to get a better value for you. Because of this, putting pricing
in a printed catalog no longer makes sense. You can be assured that the prices
online or when you call will be the lowest prices available anywhere.
Product Index
Page
Air Compressors
Air Filters
31 Fogtech
19 Fork Oil
Page
26
16, 17
Airhawk Seats
27
Battery Chargers
38, 39 Frogg Toggs Outerwear
11
Battery Tender
39 Fuel Fittings
34
BeadRider Seats
27 Gadget Mounting Systems
43- 45
BestRest Cycle Pump
31
16- 18
Brake Bleeders
34 Gear Oil
29
Briefcase
10 Gloves
GPS Holders
45
Handlebar Mount
43
Butler Maps
25
Camping Equipment 22- 25
Candle Lanterns
24 Helen Twowheels Super
Packing System
12- 15
Catoma Tents
22
Hydration
System
10
Centech Fuse Panels
37
Hyper-Lites
35
Internal Electrical Cables
41, 42
Chatterbox Comm. System 46
25
Cleaners
20, 21 JetBoil Cooking System
Clothes Sacks
12
Clothing
11, 28, 29
Coconut Socks
28
Communication Systems 46
34
Cooking Equipment
25 Jiffy-tite Fittings
Cord Close Sacks
13
Cot
23
Covers
32
19, 21
CrampBuster
26 K & N Products
Cruise Assist
26
Cruiser Bar Bag
9
LDComfort Undergarments 28
35
Ctek Battery Chargers
38 Lights
Deutsch Style Connectors 38
Dolly
32
Dry Bags
10
Electrical Kits
8, 40
17, 18
Electrical Products 8, 36- 42 Lucas Oil Products
20
Flash2Pass
32 Lucas Slick Mist
2
Page
Maps
Marsee Products
Marsee Rear Bags
Marsee Tank Bags
Motolights
MX8 Visor Insert
Nikwax Products
Novus Cleaner
Odyssey Batteries
Oil
Oil Filters
Phone Holders
Polish
Posi Products
25
4- 10
8, 9
4- 8
35
26
11
20
39
16- 18
19
45
20, 21
36
Powerlet Products
40- 42
Powerpack Kits
16
Rain Suits
11
Raincoat Water Repellent 26
RAM Mounts
Rear Bags
Page
44, 45
8, 9
Red Line Oil
16, 18
ReflectGard Decals
26
Reflective Tape
26
Relay Socket
37
Rider to Rider Comm.
46
ROK Straps
15
Roll Top Sacks
12
Royal Purple Oils
17, 18
Running Lights
35
SafeTkick Sidestand Pad 32
Safety Wire
33
Seat Cushions
27
Sidestand Pad
32
Socks
28
Speed Bleeder
34
Stop & Go
Stopwatch
Super Pack Straps
Synthetic Oil
Tank Bags
Tape
31
33
14
16- 18
4- 8
33
Techmount Mounting Sys.
Tents
Tie Wraps
Tire Gauges
Tire Pressure Monitors
Tire Repair
TireGard Tire Monitors
Tool Roll
Towels
Tread-Depth Gauge
Turn-A-Bike
Turntable
Two Wheel Journal
UltraLite Cot
Undergarments
Visor Insert
Volt Meters
Waterproofing
Weather Pack Connectors
Wet Bags
Wire Screen
Zipp Bag
www.racerpartswholesale.com
43
22
33
30
30
31
30
15
11
33
32
32
24
23
28
26
39
11
36
13
33
9
Featured Products
H2W Super Pack Straps
Marsee 12L Tear Drop
Tank Bag
The ultimate and safest strap system
to mount soft luggage on your bike.
Now available in 8 colors!
Our most versatile and best
selling tank bag. With quick-release
mono-swivel buckles, this bag fits
most motorcycle tanks.
Page 14
Page 7
JetBoil Flash Cooking System
Perfect for the motorcycle camper. The
all-in-one design combines a burner and
cooking vessel in one compact unit.
Royal Purple Synthetic Oils
We’ve expanded our oil selection to Red Line Oil,
Lucas Oil and now Royal Purple!
Page 25
Page 17
TireGard Tire Pressure Monitors
Chatterbox Communication Systems
Now available for bike, trike or
bike and trailer!
Rider to passenger and rider to rider
communication systems that utilize the
latest technology and can pair with up to
2 bluetooth devices.
Page 30
Page 46
Flash2Pass Garage Door Transmitter/Receiver
Replace your garage door opener by
integrating your remote into the high beam
switch of your turn signal lever!
Jiffy-tite Quick- Connect Fluid Fittings
All metal fittings that are the perfect
replacement for BMW’s problematic OEM
quick disconnets. Now available in
straight or 90 degree kits.
Page 32
Page 34
RAM Universal Electronics Holders
Mount your phone or GPS to your bike using
RAM’s latest holders. Just add an arm and a
base mount to customize for your bike!
Page 45
LDComfort Undergarments
Tops, tights and shorts designed to protect your
skin on a long ride.
Page 28
Turn-A-Bike Turntable and Dolly
Use the dolly to park your bike anywhere
you want it. Or use the turntable to privot
your bike on its center stand!
MX8 Motorcycle Visor Insert
This innovative visor allows instant
rider controlled tint and eliminates the
need to wear sunglasses!
Page 32
Page 26
Frogg Toggs’ Outerwear
Highly functional and affordable outerwear
and rainwear that packs small enough for a
motorcyclist!
Page 11
Gloves
Four styles with two sizes each.
These ergonomical leather gloves are
a great value!
Page 29
1-800-397-7815
3
Marsee 10L & 15L Tank Bag Features
Marsee 10 and 15 Liter Tank Bags Features
Our 10 and 15 Liter Tank Bags are triple layer molded for strength, flexibility and water
resistance. Installed on the tank bags is an injection molded 2.0mm polycarbonate lid
to provide ultra clear transparency to maps or other items stored in the Marsee tray.
Polycarbonate is noted for its impact strength, clarity and resistance to the forces of
nature. The Marsee tray is designed to hold communication and electronic gear,
maps, etc. The Marsee tray helps protect such items from the elements of nature and
places such items at the finger tips of the operator. The Marsee tray has two egress
ports from the bottom of the tray, plus two exit ports at the front of the tray. Optional
Powerlet products bring the power to the bag (see page 8 for Electrical Kits A and B).
Patents applied for on clear lid and tray.
Inside storm flap keeps weather out.
Silver colored, seam sealed interior
prevents water entry. The top lid is triple
laminate EVA, so interior is very water
resistant.
Additional map and important document
storage is located in a clear vinyl pocket in
the top of the zip off base (magnetic and
quick release mounts only). This pocket
has a water resistant zipper.
Silver interior eliminates the “dark hole”
appearance and makes it easier to find
dark objects inside the bag.
The corners of the tank bag are chamfered
to create an “octagonal” shape that
eliminates sharp corners for better fit and
comfort. Marsee D-rings are located on all
four corners to lash down items such as
gloves.
Each bag has an organizer area on the
inside cover.
Mounting options include:
Corona Mount for BMW
Corona Mounted Tank Bag for BMWUtilizing the fuel cap ring as the mounting point permits the tank bag to virtually float
above the tank. It is easy on and off (patent applied for). Available for BMW’s with the
standard 6-bolt hole pattern around the gas cap.
Corona Mounted Tank Bag for BMW K1200LTThis special kit includes additional hardware necessary to mount the bag using the
Corona Mount onto the oddments box lid on a BMW K1200LT. Available for 10L Rocket
Pocket.
Magnetic Base Mounted Tank Bags- Marsee invented the magnetic tank bag in 1976,
since then it has become one of the most popular mounting options.
4 Point Quick Release Mounted Tank Bags- Easy to install and easy to disconnect and
25% more stable than 3 point mounted systems.
Corona Mount
for K1200LT
Magnetic
4
www.racerpartswholesale.com
Quick
Release
Marsee 10L & 15L Tank Bags
Marsee 10 Liter Rocket Pocket
Overall Dimensions: 10.5” Long, 8.5” Wide, 7” High
MAR-10RM ................................10L Rocket Pocket with Magnetic Mount (pictured)
MAR-10RQR ..............................10L Rocket Pocket with Quick Release Mount
MAR-10RCB ..............................10L Rocket Pocket with Corona Mount for BMW
MAR-10LT ..................................10L Rocket Pocket with Corona Mount BMW K1200LT*
*special hardware included to mount to the oddments box lidsee website for details and images
Marsee 10 Liter Tear Drop
Slight tear drop shaped bottom to accomodate sloping tanks.
Overall Dimensions: 10.5” Long, 8.5” Wide,
8.25” High in Front, 6.5” High in Back
MAR-10DM ....................10L Tear Drop with Magnetic Mount
MAR-10DQR ................10L Tear Drop with Quick Release Mount (pictured)
Marsee 15 Liter Tour Pocket
Overall Dimensions: 12” Long, 10.5” Wide, 7.5” High
MAR-15PM ................15L Tour Pocket with Magnetic Mount
MAR-15PQR ............15L Tour Pocket with Quick Release Mount (pictured)
MAR-15PCB ..............15L Tour Pocket with Corona Mount for BMW
Marsee 15 Liter Tear Drop
Slight tear drop shaped bottom to accomodate sloping tanks.
Overall Dimensions: 12” Long, 10.5” Wide,
8.25” High in Front, 7.5” High in Back
MAR-15DM ..............15L Tear Drop with Magnetic Mount (pictured)
MAR-15DQR............15L Tear Drop with Quick Release Mount
Electrify any Marsee tank bag! When you place your order, add an electrical Kit A (plugs into a factory outlet on
BMW, Triumph or Ducati bikes) or electrical Kit B (installs directly on your battery) and we’ll install it in your
new bag for you! See page 8 for detailed electrical kit information.
1-800-397-7815
5
Marsee 1.5L Bullet Bag & 6L Ciao Borsa Bag
10L and 15L Tank Bag Options
Rain Cover (pictured)
Clear top allows map visibility even in the rain.
MAR-10RAIN ......................................................10L Tank Bag Rain Cover
MAR-15RAIN ......................................................15L Tank Bag Rain Cover
Lid Protector
Add this 3M coating to your hard lid to protect it from scratches.
MAR-10LID ............................................................................10L Lid Protector
MAR-15LID ............................................................................15L Lid Protector
Marsee 1.5 Liter Bullet Bag
The 1.5L Bullet Bag has the same great features as full-size Marsee Tank bags, but is a compact size! It is the ideal size for a wallet, cell
phone, change and smaller items. This magnetic mount tank bag has a clear map pocket with waterproof zipper. The inside is a waterproof,
silver material that allows dark objects to be seen easily.
Marsee features include:
• Inside organizer
• D-rings
• Shoulder Strap
• Inside I.D. card holder
• Storage pocket
Overall Dimensions:
7” Long, 5” Wide, 3.5” High
MAR-1.5BM ................1.5L Bullet Bag with Magnetic Mount
Marsee 6 Liter Ciao Borsa
“Ciao” in Latin based languages means “hello and goodbye”. The ideal name for this 6 liter bag
(Borsa= Bag, in Latin). The Ciao Borsa will hold pretty much everything you need for a day trip or
work commute. The octagon shape with chamfered corners is ideal for rider comfort and handlebar clearance. Adjustable shoulder strap comes standard. The physical size of the Ciao Borsa
makes for friendly mounting to almost any motorcycle!
Overall Dimensions:
10.5” Long, 8.5” Wide, 5.25” High
6L Ciao Borsa with Magnetic Mount
Marsee features include:
• Removable map pocket
• Molded handle partially recessed
• Inside organizer
• D-rings
• Inside storm flap
• Seam sealed silver interior
MAR-6ZM ................................6L Ciao Borsa with Magnetic Mount
MAR-6ZQR ............................6L Ciao Borsa with Quick Release Mount
MAR-6ZCB ..............................6L Ciao Borsa with Corona Mount for BMW
MAR-6LT ..................................6L Ciao Borsa with Corona Mount for BMW K1200LT*
*special hardware included to mount to the oddments box lidsee website for details and images
Electrify this bag! Add an electrical Kit A or B to any of the 6L Ciao Borsa Bags.
See page 8 for electrical kit descriptions.
Corona Mount
6
www.racerpartswholesale.com
Marsee 12L Tear Drop & 20L Mr. Pockets
r!
Marsee 12 Liter Tear Drop Tank Bag Expandable
lle
e
S
st
The Marsee 12L Tank Bag has a contoured shape that makes it a natural fit for almost any
e
B
tank with a gradual slope. The mounting system utilizes four straps with quick release mono
buckles that swivel 90 degrees for mounting versatility. This bag has a waterproof map pocket,
expands up to 4” and is made of strong 1680 denier waterproof fabric.
Features:
• Three D-rings to attached additional items
• Two D-rings to attach the included adjustable dual pivoting shoulder strap
• Waterproof zippers on both the map pocket and main bag entry
• Reflective piping for low light conspicuity
• Included rain cover has a clear top and a draw cord and cord lock to secure the bag in place
• End pocket stores the rain cover in the lower compartment and has space in the upper compartment for coins, glasses etc.
• 9” hidden waterproof zippered storage sleeve below end pocket
• Hydration clip on side allows easy mounting of the drinking tube from hydration systems
• Interior is made of waterproof silver fabric that makes dark objects inside the bag more visible
• Organizer area inside lid
• Retention straps hold the bag open when the bag is unzipped
• Expands up to 4” and is adjustable with compression cords and cord locks on each side
Base Features:
• Quick release mono buckles for easy mounting with four included straps
• Base has map pocket which permits the base to be used separately when needed
• Non-slip fabric on the bottom has excellent grip and is non-abrasive
• Additional storage slot underneath the map pocket
Dimensions:
Base of bag: 12” Long, 8-1/2” to 10” wide
Height: 6” to 9”, expanded adds 4” overall to the height
MAR-12DQR ..............................................................12L Tear Drop Quick Release
20L BMW Corona Mr. Pockets
The Corona Mr. Pockets has all the great features of Marsee tank bags, mounted with the innovative Corona
Mount. Simplistic in execution, the bottom Corona is bolted to the outer ring of the motorcycle fuel cap. The
upper Corona is bolted to the bottom of the tank bag. To operate, simply place the upper Corona on the
bottom Corona at about 8:00, push down then twist the bag to 12:00 and the 4 top magnets engage with
the bottom 4 magnets and the bag is secure!
Marsee features include:
• Inside organizer area with I.D. card holder
• External D-rings to attach additional items
• Shoulder straps
• Removeable top map pocket
• 3 external storage pockets
• Expands up to 4” and is adjustable with compression cords and cord
locks on each side
• Reflective piping for low light conspicuity
• Includes Rain Cover and Marsee Wallet
Dimensions:
Base of bag: 14” Long, 12” wide
Height: 6”, expanded adds 4” overall to the height
MAR-20CPB......................................................20L Mr. Pockets with Corona Mount for BMW
Visit our Marsee Products category online for additional images,
instructions manuals, warranty information and more!
1-800-397-7815
7
Marsee Electrical Kits & 20L Rear Bag
Electrical Kits (available installed on all Marsee Tank Bags)
Our Powerlet kits include what you need for a total solution! You may however need additional
adapters or internal modules to suit the electronics you may run. We recommend buying our kits,
but all Powerlet items are available separately for your installation. Order one of these kits with
your Marsee tank bag and we'll install it! Pictured installed in Marsee Tank Bag with optional
cell phone cord.
Powerlet Kit Afor BMW’s, Triumphs and Ducatis
Powerlet Kit BInstalls Directly on Battery
This kit is your solution to powering items in your bag! Kit A is for
BMW's, Triumph ST, GT and Ducati’s with factory installed outlets.
This kit is your solution to powering items in your bag! Kit B is for
most bikes. Installs directly to battery.
Includes:
• Powerlet plug, right angle, 34" long. This plugs into your factory
plug socket already in your bike and runs up to the Powermate
outlet on the tank bag.
• Powermate Power Supply Socket. The Powermate outlet is the
piece that installs into your tank bag and gives you a standardized
viewport accessible inside your tank bag in a variety of internal
cables.
• Internal cable plugs inside tank bag into Powermate outlet. One
internal Y-cable provided with one SAE plug for electric clothing
and one cigar (large cigarette auto-style outlet) good for charging
cell phone, GPS etc. For those with more than one type of device,
you may need to order additional cables (see pages 40-42).
Includes:
• 48" long fused battery lead. This easily installs onto battery and
cable runs up to the Powermate outlet on the tank bag. Includes
fuse. This cable should reach from battery to front of tank bag.
• Powermate Power Supply Socket. The Powermate outlet is the
piece that installs into your tank bag and gives you a standardized
viewport accessible inside your tank bag in a variety of internal
cables.
• Internal cable plugs inside tank bag into Powermate outlet. One
internal Y-cable provided with one SAE plug for electric clothing
and one cigar (large cigarette auto-style outlet) good for charging
cell phone, GPS etc. For those with more than one type of device,
you may need to order additional cables (see pages 40-42).
To order this with your tank bag, add “-A” to the tank
bag part number. We’ll install it on your bag for you!
To order this with your tank bag, add “-B” to the tank
bag part number. We’ll install it on your bag for you!
r!
lle
e
S
st
e
B
Marsee 20 Liter Rear Bag
The Marsee 20 Liter Rear Bag has a three way universal mounting system that will fit almost any
two-wheel transportation, from scooters to cruisers. It is the perfect day bag for extra storage for
items such as a wallet, phone, paperwork, drinks (it can double as a cooler!), rainsuit and more!
Features:
• Main compartment with external pockets on all four sides
• Waterproof zipper into main compartment with an internal storm flap
• Silver waterproof fabric interior to prevent water entry and make dark objects more visible
• Can be used as a short term cooler
• I.D. cardholder on the inside of the lid
• Reflective fabric and piping for low light conspicuity
• Removable molded handle
• Four D-rings on top that, in conjunction with the enclosed cord and cord lock, allow for items to be
lashed to the top of the lid
• Strong 1680 denier waterproof fabric
• Rain cover and shoulder strap included
Mounting:
• Quick release buckles and J-hooks drop down from the two side pockets for easy mounting
• Unique three-layered hook and loop on all four sides can be used to mount to rear racks for a very
strong attachment
Dimensions:
Main Compartment: 10-1/2” Wide, 9-1/2” Tall, 9-1/2” Deep
External Pockets:
7” Wide, 6-1/2” Tall, 1-1/2” Deep
MAR-20RB ........................................................................................................................20 Liter Rear Bag
8
www.racerpartswholesale.com
Marsee 45L Cruiser Bar Bar & 50L Zipp Bag
Marsee 45 Liter Cruiser Bar Bag
The Marsee 45 L Cruiser Bar Bag is designed to mount to a sissy bar (backrest) or to strap onto the bike
utilizing the hidden quick release buckle straps with J hooks. Made with 1680 denier waterproof fabric, the
Cruiser Bar Bag consists of two separate bags and is loaded with pockets for a versatile travel bag.
Mounting system
• Sissy bar system is expandable to fit backrests from 7 to 16 inches
• Padded sissy bar pad offers comfort to rider and/or passenger
• Drop down adjustable quick release buckles with J hooks for additional mounting options and allow the top
roll and main compartment to be mounted separately if desired
Bag Features:
• Top Roll bag entry is through waterproof zipper and hook and loop sealed flap
• Main Compartment has a drop down lid with side gussets and additional zippers to open it at a 45-degree
angle or open completely to allow full access
• Main Compartment lid has large zippered mesh pocket for storing loose items
• Silver waterproof fabric interior makes dark objects more visible
• Non-slip, non-abrasive material on the bottom of each bag
• Included shoulder strap can be attached with D-rings on either the top roll or
main compartment
External Features:
• Five total pockets with reflective fabric and piping to aid visibility in low light
conditions
• Adjustable quick release buckles connect the two bags firmly together
• Six D-rings are located on the sides of the bags to allow other items to be
attached
• Shoulder straps stored in elastic sleeves on the back of the main
compartment allow the bag to function as a backpack
• 1680 denier waterproof fabric used
• Rain cover included
• Overall dimensions: 17" long, 8" wide, 22" high
Visit online to view a video demonstration of this product by designer Rex Marsee!
MAR-45CBB
......................................................................................................................................................................................45L
Cruiser Bar Bag
Marsee 50 Liter Zipp Motorcycle Duffel
This motorcycle duffel bag is no ordinary bag. There are a total of nine storage pockets, four outside and
five inside. Three of the four external pockets zip off so you can carry them separately. One zip off bag
has brief case capabilities, another bag has tool box capabilities and the third is designed to be a toiletry
bag. The bag has six mounting straps for a good, solid mounting and stable ride. The straps hide away
into little storage pockets when not in use. The bag can be completely un-zipped for easy packing.
Three hooks allow for easy hanging of the bag.
The bag has a heavy duty carry handle and shoulder strap that comes
standard. Externally the bag is made of 1050 denier ballistics fabric and
has reflective fabric and piping for night time and low level conspicuity.
Inside the bag is finished in silver fabric and “see through” mesh fabric.
External zippers are tough number 10 coil zippers. Rain cover is included.
Dimensions:
Overall: 18” Long, 11” Wide, 12” Deep
End Pockets: 10” Wide, 8.5” High, 3” Deep
Side Pockets: 14” Wide, 8.5” High, 3” Deep
MAR-50ZIPP
........................................................................50L
Zipp Bag
1-800-397-7815
9
Marsee Accessories
er!
st
Be
ll
Se
Marsee Ballistic Accessories
Marsee Dry Bags
These durable, waterproof Dry
Bags keep elements out of your
gear. They are a great way to
organize, whether you’re packing
for hard or soft luggage. They are
the perfect packing bags for inside
saddle bags, as they are easy to
grab when you get to your
destination. Small enough to
throw in as an extra bag on trips.
Available in three sizes.
Made from 1050 denier Ballistics fabric with reflective Marsee logo.
Closures on Sunglasses Case and I-Pod Case are zippers.
Closures on Cell Phone Case and Wallet are hook and loop.
All are lightweight. Black exteriors.
MAR-CELL ..................Cell Phone Case- for flip phones
MAR-IPOD ....................I-Pod Case- for large I-Pods or I-Phones
MAR-SUN ....................Sunglasses case
MAR-WALLET ............Wallet with silver interior
Cell
Phone
Case
Sunglasses Case
MAR-DB15 ........15 Liter Dry Bag
MAR-DB20 ........20 Liter Dry Bag
MAR-DB30 ........30 Liter Dry Bag
Marsee Compression Bag
This bag is simply amazing and will
reduce the contents to about 40% of its
uncompressed size. The bag will
compress from 16 inches tall to a very
compact 6 inches. MAR-CB
Marsee Quick Clip
Forget dangerous hooks when
strapping down your luggage. The
patented Quick Clip has no hooks to
scratch, cut or otherwise cause
damage to your valuables.
Maximum weight load is 7 pounds.
Dimensions: Expands from 36” to
58” including hook device.
MAR-QC
Marsee 3L Hydration System
Hydration Systems are great add-on options to any tank bag. Large
opening mouth allows for an easier refill, plus the ability
to use ice. It is also easier to clean. 90 degree bite
valve is helpful to use with helmet on. The included
retractable lanyard attaches to luggage to keep
hydration tube in place and retracts after use.
Dimensions: 7.5” wide x 17” long
MAR-HYD3
10
I-Pod
Case
Wallet
Marsee Handle Pocket
This handle pocket attaches to the front
of tank bags, onto handlebars or anywhere you need a little extra storage.
Connects with hook and loop. Gives
easy access to small items, change for
toll fees or credit cards. Dimensions: 6”
x 1” x 2-1’2” MAR-HANDPKT
Marsee Laptop Briefcase
The Marsee Laptop Briefcase is the
perfect laptop case and organizer
briefcase. Built to the same high
standards as all Marsee Products, this
bag works for laptops or as a roomy
briefcase. One side holds a laptop and
the other holds the Marsee File Cabinet
(sold separately) or paperwork and
magazines. MAR-BRIEFCASE
Marsee File Cabinet
Keep your paperwork organized and
protected with the Marsee File Cabinet. With
a sturdy Marsee handle, this bag is ideal for
carrying paperwork to and from the office or
home. Also works well to slide inside the
Marsee Laptop briefcase. Big enough to
stow legal size folders with three separate
compartments. MAR-FILE
www.racerpartswholesale.com
Frogg Toggs Outerwear & NikWax
Visit us online for additional images,
a sizing chart and other Frogg Toggs Rain Suits.
r!
lle
t
es
Se
Frogg Togg Chilly Pad Cooling Towel
Frogg Toggs' Horny Toadz
Rain Suits
B
Designed with motorcyclists in mind!
Constructed with Frogg Toggs’ latest ultra-durable
hybrid fabric known as ToadSkinz. A unique
material with the look and feel of a traditional
polyester rain suit, ToadSkinz offers Frogg Toggs’
trademarked DriPore waterproof, breathable,
microporous film combined with a non-woven inner
layer, providing the comfort and performance Frogg
Toggs is famous for. This suit also features Frogg
Eyzz Reflective Technology which enhances
visibility and safety at night and in inclement
weather. Available in Sizes Small to 2X Large.
FRT-NT10322-01 ....................................Black Suit with Silver Piping
FRT-NT10322048 ..............................Hi-Viz Green with Silver Piping
Frogg Toggs Smokin' Toad
Heat Shield & Patch Kit
Used to prevent burn marks on any Frogg Toggs
waterproof pants leg, as a result from exposure to
motorcycle exhaust pipes. Easy to apply. FRT-11201
Nikwax Tech Wash
Nikwax Tech Wash is a wash-in cleaner for waterproof clothing and equipment Safely revitalises breathability and waterrepellency. This product is a non-detergent soap which can
be used regularly to clean clothing and equipment without
damaging the Durable Water Repellent (DWR) coatings. Use
this product instead of detergents or washing powder.
NIK-180 ............................................................Tech Wash- 5 oz
NIK-181..........................................................Tech Wash- 10 oz
Nikwax TX Direct Wash In Waterproofing
Wash-in waterproofing for wet weather clothing. Adds waterrepellency and revives breathability to fabrics without
wicking liners.
NIK-250 ................................................TX Direct Wash In- 5 oz
NIK-251 ............................................TX Direcct Wash In- 10 oz
Nikwax TX Direct Spray On Waterproofing
Spray-on waterproofing for wet weather clothing.
Adds water-repellency and revives breathability.
NIK-570 ................TX Direct Spray On- 5 oz
NIK-571 ................TX Direct Spray On- 10 oz
22
Frogg Toggs' Chilly Pad provides an innovative way to cool down
while enduring outdoor heat and/or high levels of physical activity.
The Chilly Pad is made from hyper-evaporative
material that retains water while remaining dry to
the touch. When wet, the towel begins to evaporate and cool, providing cool, soft comfort to the
user. When it stops cooling (about 1-4 hours,
depending on conditions), you simply re-wet the
towel in hot or cold water and ring it out. Within
minutes, it's cool again. Size: 27" x 17".
FRT-CP100-47 ..............Hi-Viz Yellow Chilly Pad
Sammy Trail Towel
This super-absorbant drying towel is perfect for motorcyclists! The
Sammy Trail Towel is a trail-tested, super soft, super-absorbant
compact pack towel. Weighs 1.7oz and packs
ultra-small in reusable dry bag. Wet, wring and
reuse over and over again. Wipes out trail dust
and sweat and won't clump or matt with use.
Eco-friendly organic material. Size: 17" x 13".
FRT-SAMMYTT-02 ................Sammy Trail Towel
Nikwax Tent and Gear Solarproof
Spray-on waterproofing and UV blocker for all weatherproof
textiles including tents, awnings, marquees, rucksacks,
panniers and camera bags.
NIK-3A1 ..........................................Tent and Gear Solarproof
Nikwax Conditioner for Leather
Sponge-on waterproofing conditioner for full grain leather.
Revives breathability, softens and waterproofs.
NIK-861 ....................................Conditioner for Leather- 4.2 oz
Nikwax Base Wash
Nikwax Base Wash is a new product created specially for
cleaning synthetic base-layers. It enhances the fabrics
wicking properties, stopping them from stinking and helping
them dry more quickly.
NIK-140 ..........................................................Base Wash- 5 oz
NIK-141..........................................................Base Wash-10 oz
Visit online for additional Nikwax
products, instructions & more!
www.racerpartswholesale.com
1-800-397-7815
11
H2W Clothes Sacks & Roll Top Sacks
The Helen Twowheels Super Packing System
is a waterproof system that is being used by
thousands of riders to pack everything they need
for a weekend trip or cross-country adventure.
With three main types of bags- the Roll Top Sack,
Cord Close Sack and Clothes Sack- plus packing straps &
a few accessories- you will have everything you need for your trip!
All of the bags are made of black, high-quality, rugged, waterproof
material that is laminated on the inside with a layer of polyvinyl. On
the Clothes Sacks and Roll Top Sacks, all seams are sealed and,
once rolled, both styles of bag are waterproof. All have the unique
reflective, slotted strap the entire length for attachment versatility and
only the finest quality nylon hardware. Made in the USA.
Visit us online at www.racerpartswholesale.com for complete
instructions and a video on how to use this system!
Clothes Sacks
These bags were developed for those people who want the convenience of
easy access. They are built to seal like the Roll Top Sack but open the
length of the long side so you can get to all those little things in there. They
are also waterproof and have double handles. These are compression
bags and, although you can fit a lot of stuff in them, they will never pack as
tight as the regular Roll Top Sacks. To pack, stuff items into the two ends
first (better yet, stuff some mesh insert bags into the ends for easy
packing!). Then load the middle. Once packed, close the lips of the bag
and roll down three times. Clip the ends and your bag is ready to go!
HTW-410 ..................................................................Extra Large- 14” x 32”
HTW-420 ..................................................................Large- 12” x 26”
HTW-430 ..................................................................Medium- 10” x 20”
Roll Top Sacks
These are the perfect waterproof bags to compress that soft
squishy stuff you want to keep dry. If you have sleeping gear,
this is the bag for you! To pack, roll up your Thermarest and put
it in, then unwind it to the perimeter of the bag so you have a
hole in the center. Stuff your loose sleeping bag and other soft
items into the center. Then hold the lips of the bag, punch out
the air (pictured to the right), roll down at least three times,
then clip. This bag also works for clothing and other soft
items. Note: dimensions listed are before rolling the bag- you
will use at least 6” in height (depending on how many times
you roll it) to close the bag.
HTW-210 ..................................................Extra Large- 14” x 36”
HTW-220 ..................................................Large- 12” x 32”
HTW-230 ..................................................Medium- 10” x 28”
12
www.racerpartswholesale.com
H2W Cord Close Sacks, Mesh & Wet Bags
Cord Close Sacks
These bags come in 4 sizes and are the perfect bag for those long hard, potentially wet
things like tents and camping chairs. While the fabric of the Cord Close Sacks is
waterproof, the end closure is a drawstring with rainfly closure. This allows your
potentially damp items, like tent or chair, a little air to breathe. The drawstring and
rainfly closure won't put any pressure on the ends of the poles. Extra Large is for that
huge tent that people shouldn't be carrying on their motorcycle! Large is perfect for a
4-man Eureka size. Medium is right for most 2-man tents.
Small is the bag you want for that folding chair or loose tent
poles. To pack a tent, slide your poles in first. Then put your
rain fly all the way in the bottom, then follow it with the tent
body itself. Finish with the ground cloth. This will allow you
to take the items back out of the bag in the order you need
them in. For a chair, simply slide it in, pull the cord and slide
the cord lock to close the end of the bag (pictured).
HTW-310 ......................................................Extra Large- 9” x 35”
HTW-320 ......................................................Large- 8” x 34”
HTW-330 ......................................................Medium- 7” x 26”
HTW-340 ......................................................Small- 5” x 32”
Mesh Insert Bags
These handy bags are made of sturdy mesh fabric and have a zipper
through the center of the bag. The bag diameters are sized to fit in
the Roll Top Bags (pictured) and the Clothes Sacks. They were
designed to help you organize your stuff with these “removeable
pockets” inside your bags for ease of use.
HTW-610....................................................................Extra Large- 14" x 8"
HTW-620....................................................................Large- 12" x 8"
HTW-630....................................................................Medium- 10" x 8"
Wet Bag
This sturdy mesh bag with top zipper is perfect for drying out
wet clothing and is a great place to put the smelly stuff. Put it
right on top of the rest of the bags by threading the strap
through the bottom side of the bag (right picture). Allow it to
flap in the breeze, where it does its job best. Don’t have any
wet stuff? Strap on the bag anyway and you’ll always have a
place to put newspapers etc. Left picture is of the wet bag
on Helen Twowheels Clothes Sack and Roll Top Sack.
HTW-600 ........................................................Wet Bag- 21.5” x 14”
Wet- Dry Combo Bag
Be
st
Se
lle
This bag incorporates our popular Wet Bag with a Dry Bag for a versatile addition to
r!
any packing system. The wet bag is perfect for wet clothing or towels that you’d like to keep
separate from your dry items. The mesh allows the bag to flap in the wind and dry out items as
you ride. The dry bag is an easy-access bag that is ideal for a rainsuit, jacket or other layer of
clothing that you may need during your trip. Mounts by threading your straps through the slots in
the underside of the dry bag. There is no need to loosen your straps to get at your clothing/dry
items- simply pull apart the hook and loop closure on the dry bag and unroll. Rolls three times for
a waterproof closure. There are two reflective strips on the wet bag and one on the dry bag. For
additional visability, order the Wet-Dry Combo Bag with added Yellow Reflectivity.
Dimensions: Dry Bag (rolled closed): 15.5" high x 24.5" wide, Wet Bag: 12" high x 21" wide
HTW-601 ........................................Standard Wet-Dry Combo Bag (top)
HTW-601Y ......................................Wet-Dry Combo Bag with Added Yellow Reflectivity (bottom)
1-800-397-7815
13
#
H2W Super Pack Straps
r!
Super Pack Straps
lle
e
S
st
B e The Super Pack Straps come in a four piece set. These can attach to
many points on your bike- the luggage rack, hand rails, subframe or under
the passenger seat or top box. They will hold bags on the rear seat or above
the saddle bags for 2-up touring.
Benefits of H2W Super Pack Straps:
No elastic to wear, fray or stretch over time or break while riding
Made from a thick, heavy strap material
Plastic hardware to protect you and your bike
Strapping material will not stretch while riding, so your load remains in place
• Secure d-rings will not loosen or break
• Four strap system allows mounting versatility
• Short straps with d-rings can easily stay on bike when full strap system is
not in use
• Replacement d-ring strap pieces or D-ring extenders available
•
•
•
•
Super Pack Straps
HTW-101 ......................................Red Pack Straps
HTW-102 ......................................Yellow Pack Straps
HTW-103 ......................................Blue Pack Straps
HTW-104 ......................................Black Pack Straps
HTW-105 ......................................Orange Pack Straps
HTW-107 ......................................Hot Green Pack Straps
HTW-108 ......................................Hot Orange Pack Straps
HTW-109 ......................................Hot Pink Pack Straps
How to use the Helen Twowheels Super Pack Straps: Once your bags are all packed, it
is time to put it all on your bike! The pack straps come in a four piece set- two short, two
long. There is a velcro piece on one of the short straps that holds the set together when not
in use- when you are ready to use the straps, simply wrap the velcro around itself.
To begin, put each short strap on opposite sides any where around the frame of the bike
(put the d-ring end through the built-in loop at the opposite end of the strap). You can use
grab rails, luggage rack, seat pan frame or any other place that is easy to reach and is
attached firmly to the frame of your bike.
Attach the long straps the same way. Keep the attachments close together, rather than far apart, as this will form a closed
circle around your load and hold it more tightly.
Stack your bags and feed the long straps though the webbing slots on each bag as you come to them. Thread the end of the
straps through both d-rings on the short straps, then go back over one and under the other (top picture). Then cinch down the
straps by pulling down on the strap and up on the tail (bottom picture). Work first one strap, then the other and go back and
forth until snug. Don’t forget to tuck the loose end under the tight strap so that it doesn’t flop around as you ride.
BMW K1200LT Strap
This special version of the Super Pack Straps is designed for the BMW K1200LT,
but also will allow many sportbikes without handrails to carry bags on the back
seat. It is meant as a long-term mounting option that fits under the passenger
seat and is used to attach bags on the rear seat.
Visit www.racerpartswholesale.com for installation instructions.
HTW-1002 ................................................................................................BMW K1200LT Strap
14
www.racerpartswholesale.com
ROK Straps & H2W Box Bags
Box Bags
Use these box bags to help organize your expedition side cases. They are zippered bags with color-coded handles for easy
organizing. Available in several sizes with multiple strap colors. We recommend ordering a combination of box bags and lid
bags to fit your specific application and packing needs.
Part Number
Size
Dimensions
Strap Color
HTW-510
Large Box Bag
5-1/2” x 9” x 16”
Red
HTW-511
Large Box Bag
5-1/2” x 9” x 16”
Yellow
HTW-512
Large Box Bag
5-1/2” x 9” x 16”
Blue
HTW-513
Large Box Bag
5-1/2” x 9” x 16”
Burgundy
HTW-520
Small Box Bag
1” x 4” x 15-1/2”
Green
HTW-530
Large Lid Bag
2-1/2” x 7” x15-1/2”
Black
HTW-531
Small Lid Bag
2” x 5-1/2” x 15-1/2”
Brown
Tool Roll
An improvement on the
standard tool roll. These
have a longer flap, a better
strap and a special large
hook and loop pocket the
entire length for loose bolts,
wiring diagram, or cleaning rag! Yet they still fit in the space
under your seat. (Tools not included.)
HTW-700 ..................................................................................Tool Roll
Tank Panniers
These Tank Panniers are designed to
be used on most naked bikes,
especially the BMW GS. They have
wide adjustable straps to hang off your
gas tank, and can be used alone or with
your favorite tank bag (see pages 4- 10
for Marsee Tank Bags). The parts that
come in contact with your paint are shielded with neoprene.
9"h x 9"w x 6”d
HTW-900 ........................................................Tank Panniers- Pair
ROK Adjustable Motorcycle Stretch Straps
Designed to fit bike lugs, frames and carry racks, allowing immediate access to your luggage. The core is 100% natural
rubber, which offers the best blend of tear resistance and oxidization and extends the working life of the strap. The
interlocking buckles last the distance and are gentle on your luggage and motorcycle. Adjustable lengths of 18- 54”
caters for the largest range of luggage shapes and sizes. Confidently secure 90 lbs in all weather conditions. Unique
closed-end fastening system ensures there are no dangerous steel hooks.
ROK-00001
ROK-00025
................................................................................................................Motorcycle 54” x 1” adjustable strap, with some color
................................................................................................................................Cruiser 54” X 1” adjustable strap, all black
ROK-00001
ROK-00025
Pack Straps
Adjustable from 12” to 42”. Specifically designed to attach to back packs and secure smaller
items without damaging waterproof materials. Quick release buckles ensure fast and quick
access to gear. ROK-00307
1-800-397-7815
ROK-00307
15
#
Red Line Oil for Motorcycles
Red Line Motorcycle Oils
Gear Oils
RD4-2704 ..........80W w/Shockproof- Popular for Sportster
V-Twin transmissions, 65cc, 85cc, 125cc, and 250cc two
stroke motocross transmissions, as well as shifter kart
gearboxes, and CRF transmission cases. Shockproof
features microscopic solid medium to provide cushioning
between gear teeth, while maintaining lower drag.
As part of Red Line’s Powersports line, these High Performance
Motorcycle Oils are fully-synthetic formulas specifically created for
the high demands of the latest high-revving four-stroke motocross
bikes and ATVs, Sportbikes, and V-Twins.
Motorcycle Oils
RD4-2304 ........................10W30- For use where this
viscosity is specifically recommended, like many
Kawasaki KX 250F and various Hondas from 2006-up
RD4-2404 ......10W40- For use in many four-stroke
motocross and ATV engines, as well as four-cyclinder
and V-Twin Sportbikes.
RD4-2504 ........................20W50- Designed for the latest
Big-Twin motorcycle engines that specify 20W50 motor
oil, including Evolution, Twin Cam and aftermarket
engines of similar design.
RD1-2604 ......20W60- Recommended for V-twins that
need more viscosity due to operation in extremely hot
climates. Also popular for Evos and Twin Cam engines
with big bore kits, stroker kits or issues with valvetrain
noise.
Suspension Fluids
Superior shear stability over most popular shock oils. Allows
use of lower viscosities. Far less shock fade, provides lower
operating temps for same viscosity when compared to
conventional fluids. Eliminates most foaming and provides
excellent seal lubricity. Antiwear additives assist in longer
shock life. 16 oz. bottles
RD9-1102 ....................................................................................LikeWater
RD9-1112 ....................................................ExtraLight 2.5WT (pictured)
RD9-1122 ......................................................................LightWeight 5WT
RD9-1132 ............................................................................Medium 10WT
RD9-1142 ..................................................................HeavyWeight 30WT
RD4-2804 ............................V-twin w/Shockproof- For all
H-D® trans including the Evolution engines, Twin Cam
engines, and latest 6-speed Cruise Drive. This product
dampens transmission noise (reducing the notorious
shifting clunk found in these gearboxes), dramatically
reduces temperature, provides thicker oil films between
gear teeth and resists throw-off.
RD4-2904 ..........V-Twin Primary Case- For
1984-to-present V-Twin American motorcycle engines,
including Evolution, Twin Cam, and aftermarket engines of
similar design. Improves clutch operation while reducing
wear and temperature. This product is for use in the
primary chaincase with wet-diaphragm spring clutches.
Fuel System Cleaner
Complete Fuel System Cleaner for Motorcycles. Pour one
bottle into a street bike, dirt bike, ATV or PWC for clean-up,
to regain lost power and improve fuel economy.
RD6-0102 (4 oz.)
Red Line Oil Powerpacks
These PowerPacks include the Red Line
Motorcycle Oils in convenient packages
that are complete oil change kits in one
box!
RD9-0226 (pictured) ........Big Twin 20W50This kit is for Evolution and Twin-Cam
engines and includes 5 quarts of 20W50
Motorcycle Oil, 1 quart of V-Twin
Transmission Oil with ShockProof, 1 quart
of Primary Chain Case Oil, 1 bottle of Fuel
Injection Cleaner for Motorcycles, a sticker
kit, a Red Line Oil embroidered hat, and a
versatile funnel.
RD9-0231 ..........................Big Twin 20W60- This kit is for
motorcycles with Flathead, Knucklehead, Shovelhead, Panhead
engines (as well as Big Twins operated in hot climates or with wide
clearances). Includes 5 quarts of 20W60 Motorcycle Oil, 1 quart of
V-Twin Transmission Oil with ShockProof, 1 quart of Primary Chain
Case Oil, 1 bottle of Fuel Injection Cleaner for Motorcycles, a
sticker kit, a Red Line Oil embroidered hat, and a versatile funnel.
We are one of the largest Red Line Oil distributors in the country and stock Red Line’s complete line!
For other Red Line Oil Products, see page 18, visit us online at
www.racerpartswholesale.com or call us at 1-800-397-7815.
16
www.racerpartswholesale.com
Royal Purple & Lucas Oils for Motorcycles
Royal Purple Synthetic Oils
Royal Purple
manufactures high
performance lubricants for
many applications,
including motorcycles. Royal Purple’s advanced additive
technologies enable its products to outperform leading synthetic
and conventional lubricants. These unique chemistries strengthen
the base oil for improved performance. They also create an ionic
bond that adheres to metal parts for continuous protection.
Royal Purple 20W50 Synthetic
Motorcycle Oil
This Royal Purple 20W50 Max-Cycle motor oil is
specifically formulated to improve motorcycle engine
performance. It features a select synthetic base oil
and Royal Purple's proprietary Synerlac additive
technology. Max-Cycle provides unparalleled film
strength that is up to 400 percent stronger than the
leading synthetic and mineral oil.
ROY-01316 ..........20W50 Synthetic Motorcycle Oil
Royal Purple Max Gear Oil
Royal Purple's Max-Gear is an ultra-tough,
high-performance, GL-5 automotive gear oil designed to
provide maximum protection to heavily loaded gears, while
maximizing power throughout the drivetrain. It outperforms
many other oils because it combines the highest quality
synthetic oils with Royal Purple's proprietary Synslide
additive technology. Max-Gear makes your gears run
smoother, quieter, cooler, and longer without overhauls.
ROY-01300 ....................................75W90 Max Gear Oil
ROY-01301 ....................................75W140 Max Gear Oil
Looking for more technical information on
Red Line Oil, Royal Purple Synthetic Oil
or Lucas Oil Products?
Please visit online at
www.racerpartswholesale.com for additional
information, including technical sheets,
MSDS sheets, videos and more!
Still have questions?
Feel free to give us a
call at 1-800-397-7815 or
e-mail info@racerpartswholesale.com
Lucas Oil Products
Lucas High-Performance Motorcycle Oils
are the result of technology gained through
years of blending motor oils and gear oils
for the racing, industrial and agricultural
industries. Lucas offers a full line of
motorcycle oils that far exceed all OEM
specifications for the motorcycle and ATV
industry. Lucas Motorcycle Oil will lower oil
temperature, extend the life of your vital components, reduce noise,
reduce leaks and increase performance. On top of all that, it will
outlast other oils up to 4 times as long! Lucas Motorcycle oils can
be used in any motorcycle or ATV engine, air cooled or water
cooled. Give Lucas a try and experience the results for yourself!
Lucas High Performance Motorcycle Oil
Lucas Motorcycle Oil is built for endurance, lasting up to 4 times
longer than other brands. It will also lower oil temperatures, extend
the life of vital components, reduce noise and leaks, and increase
performance. The SAE 20W-50 is also an excellent
gear oil and primary oil. The Synthetic SAE 50W
was designed specifically for the air-cooled V-twin
engines. All Lucas Motorcycle Oils meet JASO
specifications. 1 Quart.
LUC-10700 ..............................................SAE 20W-50
LUC-10702 ....................................Syn SAE 20W-50
LUC-10710 ..........................Semi-Syn SAE 10W-40
LUC-10712 ............................SAE 50 wt. (pictured)
LUC-10765 ..........................................Syn SAE 50W
LUC-10714 ................................................SAE 70 wt.
Pure Synthetic Gear Oil
Lucas Pure Synthetic Gear Oils are super-slick, long
lasting lubricants designed especially for heavy duty or
high performance applications where regular gear
lubricants just aren’t good enough. They contain a special
additive package that increases lubricity and insures less
gear noise and longer bearing life. Excellent for use in
limited slip differentials. Designed to stand up to high
temperatures without losing its lubricity. 1 Quart.
LUC-10047 ..............................................Syn SAE 75W-90
LUC-10121 ........................Syn SAE 75W-140 (pictured)
Synthetic Fork Oil
This high performance synthetic Fork Oil provides more responsive
handling and is compatible in all systems, including damping
rods, cartridge, bladder, conventional and inverted forks. Key
Benefits: More Responsive Handling, Prevents Foaming,
Reduces Thermal Expansion, Prevents Seal Hardening,
Prevents Static Friction, Better Wear Protection and Prevents
Oxidation and Oil Thickening. 16 oz. bottles
LUC-10771 ......................................5WT Synthetic Fork Oil
LUC-10772 ....................................10WT Synthetic Fork Oil
LUC-10773 ....................................15WT Synthetic Fork Oil
1-800-397-7815
17
#
Oils & Lubricants for Other Applications
We know you love your motorcycle, but you probably have other vehicles toofrom snowmobiles and ATVs to street cars and trucks. Here is just a small sampling of
some of the other oils we have in-stock. Visit us online for our complete listing.
Upper Cylinder Lubricant (Fuel Treatment)
Motor Oils
Lucas Upper Cylinder Lubricant & injector Cleaner is
formulated for gasoline, diesel and LPG engines. It is a
blend of heat resistant, super slick oils and additives that
cleans and lubricates the fuel system. It also causes the fuel
to burn more efficiently for greater fuel economy. LUC-10020
Heavy Duty Oil Stabilizer
Produced in only one top-of-the-line grade, these products offer the
highest quality available on the market today and in the widest
variety of viscosity. Fully-synthetic ester formula for passenger cars,
light trucks, performance vehicles and marine applications.
Available in many viscosities, including for diesel engines.
Visit our Red Line Motor Oil category online or
call us for more information.
Automatic Transmission Fluids
Lucas Heavy Duty Oil Stabilizer is the #1 heavy duty and
high performance oil supplement in the U.S. It eliminates dry
starts and resists thermal breakdown in new engines. It
stops smoking, knocking, and oil consumption in worn
engines. Use it in any manual trans or differential to stop
wear, leaks, heat, noise and hard shifting. It safely blends
with all petroleum products, even synthetics. LUC-10001
Semi-Synthetic 2-Cycle Oil
This clean burning formulation is smokeless because
the “would-be” emissions are burned, thereby increasing
performance and fuel economy. No more filter
clogging, and longer life! LUC-10110
High Performance Pure Synthetic Motor Oil
With different combinations of viscosity, slipperiness, and
OE-recommended additives packages, Red Line offers the
widest selection of ATF available.
D4 ATF, D6 ATF, Racing ATF, High-Temp ATF, C+ ATF, Synthetic
ATF Available. Call or visit online for additional information.
Lucas High Performance Pure Synthetic motor oils
are formulated to provide maximum protection against
heat and engine wear while minimizing drag to
optimize fuel economy. These one of a kind formulas
are the perfect on-track/off-track motor oils.
Many viscosities available. Visit our Lucas Oil
Product Category Online for additional info.
Gear Oil For Manual Transmissions
Since most GL-5 gear oils for differentials are too
slippery for manual transmissions, Red Line offers
these products that ensure proper shifting while
providing ultimate wear protection.
MT-85, MT-90, MTL, 75W90NS Gear Oils Available.
Shockproof Gear Oils
Acting like a liquid grease, these unique lubricants contain
a suspension of solid microscopic particles as an extreme
pressure agent, offering a "best of both worlds" balance of
low drag and superior protection for gear teeth.
Heavy Shockproof, Lightweight Shockproof,
Superlight Shockproof Available.
18
Royal Purple Motor Oil
Royal Purple Motor Oil increases horsepower and
torque, saves fuels and reduces heat, wear and
emissions. It has unsurpassed oxidation stability that
allows for extended oil drains and fewer oil changes.
Royal Purple's performance advantages come from a
blend of synthetic oils plus Royal Purple's proprietary
Synerlec technology. Royal Purple Motor Oil is
compatible with other mineral and synthetic motor oils.
Many viscosities available. Visit our Royal Purple Oil
Product Category Online for additional info.
www.racerpartswholesale.com
K&N Oil & Air Filters
K&N Oil Filters for
Harley Davidson and BMW
K & N oil filters for Powersports are 'TUV'
product endorsed and 'TUV' factory production
monitored. This means every K&N oil filter equals or exceeds all
OEM specifications. These oil filters contain a modern synthetic
filter media designed for ultimate flow with less
pressure drop, yet they're engineered for outstanding filtration. All K&N oil filter for Powersports that
are 'spin-on' feature a heavy-duty metal can with a
17mm nut affixed onto the end, which allows for
easy installation and removal. The 17mm nut is
crossed-drilled, so racers can safely wire the filter to
their bike. So, if you want excellent oil filtration for
your bike, these K&N oil filters are what you need.
K&N Air Filters
K&N’s lifetime replacement air filters are designed to increase
horsepower and acceleration while providing excellent filtration.
These filters are custom designed to fit into
your existing factory air box. Their drop-in
design means adding performance is simple.
Simply remove the disposable air filter and
replace it with a K&N; there is NEVER any
cutting or fitting required. K&N stock
replacement air filters for street vehicles are
covered by our famous K&N Million-Mile
Limited Warranty™ and will be THE LAST AIR
Pictured: BM-1205
FILTER YOUR VEHICLE WILL EVER NEED.
Pictured: KN-171B
Part #
KN-170
Harley OEM Part Numbers
Finish
6379677A, 6380580A
Black
KN-170C 6379677A, 6380580A
Chrome
6373199, 6373199A, 6379899,
KN-171B
6379899A, 6379677A, 6380580A
Black
6373199, 6373199A, 6379899,
KN-171C
6379899A, 6379677A, 6380580A
Chrome
KN-172C 6378280, 6381080A
Chrome
KN-173C 6381290, 6381390
Chrome
Part #
Harley OEM Part Numbers
HD-1499
2946199
HD-8834
2933104
HD-1390
2925991A, 2933096
HD-1388
2903688B, 2933196
HD-0800
2944299A, 2944299B, 2944299C,
2944299D
Part #
BMW OEM Part Number
BM-0400
13711341528
Part #
BMW OEM Part Numbers
Finish
BM-1204
13717672552
KN-161
11421337198, 11421337572
Black
BM-1205
13717672602, 13717703583
KN-163
11001341616, 11421460697,
11421460845
Black
BM-1298
13721342355
KN-164
11427673541
Black
BM-1299
1371146916
Use this cross reference as a reference guide only. Any use of this cross reference guide to find a replacement filter
is done at the installer’s risk. Please contact us if there is any question about fitment.
K & N Air Filter Oil
K & N Air Filter Cleaner and Degreaser
K & N Air Filter Oil has been specially formulated
to work in combination with the cotton fabric in
K & N air filter elements, providing a
superior air-filtration system.
When used as directed, it
quickly penetrates the filter pleats,
where it remains suspended in the cotton fabric.
Saturation is maintained until the element is
eventually cleaned with K & N’s Air Filter
Cleaner and Degreaser.
KNN-99-0504 ........................................................6-oz. aerosol can- red
KNN-99-0516 ......................................................12-oz. aerosol can- red
KNN-99-0704 ....................................................................Sealing grease
K & N Air Filter Cleaner and Degreaser is formulated to clean K & N
(cotton and foam-fabric type) air cleaners and air filter elements.
K & N Cleaner and Degreaser works to dissolve oily dirt built up,
and can be washed away with water.
KNN-99-0621 ..................................................32-fluid oz. (squirt bottle)
KNN-99-0635 ....................................................................1-gallon bottle
Filter Care Service Kits
Includes a 6-oz. bottle of filter cleaner and a 6-oz. aerosol can of
filter oil.
KNN-99-5000
Includes a 12-oz. bottle of filter cleaner and an 8-oz. squeeze bottle
of filter oil.
KNN-99-5050
1-800-397-7815
19
Cleaners & Polishes
er!
t
es
B
ll
Se
Novus Cleaner
& Polish
Perfect for
removing
scratches and
cleaning
motorcycle
windshields!
The #1 cleaner removes dirt and leaves a
glaze that cuts static and repels dust. The
#2 polish removes fine scratches and haze.
Finally, the #3 scratch remover is for
deeper scratches. Follow up with the
#1 cleaner for the perfect final touch!
Available in 2 oz. or 8 oz. sizes.
NOV-7020 ..............................#1 Polish, 8 oz
NOV-7026 ..............................#1 Polish, 2 oz
NOV-7030 ..............................#2 Polish, 8 oz
NOV-7033 ..............................#2 Polish, 2 oz
NOV-7080 ..............................#3 Polish, 8 oz
NOV-7081 ..............................#3 Polish, 2 oz
NOV-7081 ..............................2 oz. Polish Kit
Aluminum Brightener
This foam cleaner brightens
wheels, engines, engine
blocks, fuel tanks, bikes and
more. Its thick foaming
action leaves a radiant
surface with every use,
and no residue is left
behind. 1 liter. VAL-71664
Lucas Liquid Polish
Lucas Liquid Polish cleans,
conditions and protects all
painted, chromed and glass
surfaces instantly and
effortlessly. It is quick and easy,
clear coat safe and can be used
in sun or shade! 16 oz. bottle
LUC-10150
Lucas Metal Polish
Lucas Metal Polish cleans,
polishes and protects alumimum
and other metals. It has built-in
enhancement elements that help
to prolong and protect the
treated surface from fading,
oxidation or tarnishing.
Maximum luster with minimum
effort. 16 oz. bottle. LUC-10155
Metal Polish
Metal Prep and Polish Set
Removes tough stains and
oxidation from metal surfaces.
Metal Prep cleans and prepares
surfaces for the Metal Polish.
VAL-71610
RPW Super Absorbent
Drying Cloth
Super absorbent
all-purpose towel.
It washes, dries and
polishes any
surface. Use for
any type of liquid pick-up. Won’t scratch
any surface. Doesn’t drip- doesn’t make
a mess. Ideal to have on your bike!
9-3/4” x 13-1/2” RPW-DC
20
Lucas Slick Mist
Lucas Slick Mist is a true paint
gloss intensifier that is great for
motorcycles, cars, boats and
more! It can be used on wet or
dry surfaces and can even be
used as a quick detail spray. It
is safe on glass and lexan. This
product is Lucas Oil’s #1 seller!
LUC-10160 ..............24 oz bottle (pictured)
LUC-10483 ..................................8 oz bottle
Will significantly cut your polishing
time. It works on all metals. Every
polish will give you a shine, but only
Magic Mix does it with such ease.
See why we call it the Lazy Man’s
Polish!
VAL-71611......................8-oz. bottle
VAL-71640 ..................16-oz. bottle
Body Wax
Use once or twice a year to protect
painted surfaces. No buffing is
required and it’s clear-coat safe!
VAL-71646
Hylomar Gasket Remover
This is the ideal low toxicity product to use
prior to the application of any
sealant. Gasket remover is
used to remove cured
Hylomar Universal Blue and
also cured Hylomar Anaerobic
sealants. Both products are
250ml, with brush top.
HYL-HGR001 ......................gasket remover
Track Claw All-Purpose
Cleaner and Degreaser
Quick and easy to use, Track
Claw All-Purpose Cleaner and
Degreaser is chemically designed
to remove tar, oil, grease, dirt,
rubber and fingerprints from all
washable surfaces. It can be
used to clean your motorcycle.
You’ll also find it perfect for
cleaning engine parts, sinks, stainless steel,
carpet, chrome, shop floors and tile, vinyl
and velour upholstry, maintenance
equipment and much more!
19-oz. spray can. T29-50
Track Claw Racing Polish
Track Claw Racing Polish is the most
revolutionary breakthrough in polish
technology. It reduces dirt pickup
and lowers coefficient of drag. Its
unique Fluoropolymer chemistry
sets it apart from anything you have
ever used, and it’s safe on all finishes. It leaves the surface so ultraslick that it reduces wind drag.
16-oz. bottle. T29-30
Race Glaze Polish and Sealant
Race Glaze Polish and Sealant is
three products in one bottle! The
cleaner removes tars and stains,
the micro fine leveling agent
levels and removes fine scratches
and blemishes on clear coats and
the durable, yet breathable, clear
poly acrylic protective coating
protects against fading, acid rain and harsh
airborne pollutants. Fast, easy to use and
safe for hand or machine buffing.
RGP-15165
Race Glaze Gloss Highlighter
Race Glaze Gloss Highlighter is formulated
to enhance gloss and protection between
Race Glaze polishings. It can be
used on paint, vinyl trim, plastic,
glass or chrome surfaces. Use it
regularly to “quick-dust” and give
your vehicle a “just-polished” feel
and look. No harsh airborne
pollutants. Fast, easy to use and
safe for hand or machine.
RGP-15200
www.racerpartswholesale.com
Chemicals
Hylomar Universal Blue
K & N Air Filter Oil
K & N Air Filter Oil has
been specially formulated
to work in combination
with the cotton fabric in
K & N air filter elements,
providing a superior airfiltration system. When
used as directed, it
quickly penetrates the
filter pleats, where it
remains suspended in
the cotton fabric. Saturation is maintained
until the element is
eventually cleaned
with K & N’s Air Filter
Cleaner and degreaser.
KNN-99-0504 ..........6-oz. aerosol can- red
KNN-99-0516 ..........6-oz. aerosol can- red
KNN-99-0704 ........................Sealing grease
K & N Filter Care Service Kits
This polyester urethane based
sealant is non-setting and
non-hardening even at high
temperatures. The compound is
resistant to all industrial fuels,
oils, water, water/glycol and
methanol mixtures. Hylomar
Universal Blue is effective for the
sealing of metal to metal and
plastic to plastic surfaces.
The temperature range is -60oF to 480oF.
HYL-HUBRA1 ................................6 oz aerosol
HYL-HUBR2 ......................................75ml tube
Gel Lube
Sprays on thin and
penetrates, but almost
instantly turns into a gel
that stays put. Works as an
assembly lube, but has thousands
of other uses. VAL-71756
These anaerobic compounds lock
and seal nuts, bolts, bearings, etc.
VAL-71620 ....................Med., 10 ml.
VAL-71621 ....................Med., 50 ml.
VAL-71622 ....................High, 10 ml.
VAL-71623 ....................High, 50 ml.
Includes a 12-oz. bottle of filter cleaner and
an 8-oz. squeeze bottle of filter oil.
KNN-99-5050
KNN-99-0621 ..32-fluid oz. (squirt bottle)
KNN-99-0635 ........................1-gallon bottle
See Page 19 for K&N
Oil and Air Filters.
Epoxi-Putty
This is a kneadable,
steel-reinforced epoxy putty
that cures in minutes. It can
be drilled, tapped, filed, etc.
and resists temperatures up
to 600°F. VAL-71636
MPZ Assembly
Lube and Cam
Lube
Protect and lubricate new and rebuilt
engines. It has a “stay-put” action
and a natural attraction to metal.
VAL-71753 ....................12-oz. bottle
VAL-71752 ......................4-oz. bottle
HV-350
All-in-One Silicone
K & N Air Filter Cleaner and Degreaser is
formulated to clean K & N (cotton and
foam-fabric type) air cleaners and air filter
elements. K & N Cleaner and Degreaser
works to dissolve oily dirt built up, and can
be washed away with water.
Valco has simplified its automotive silicone
product line to one premium-grade silicone
that does it all. Every color of is lowvolatile, oxygen-sensor safe and withstands
high temperatures.
VAL-71195 ....................................Aluminum
VAL-71105 ............................................Clear
VAL-71135 ............................................Black
White Lithium
Grease®
VAL-795903
TM
Removes greases or you can
use it as a parts cleaner. Use
with HYLOMAR® and HV-350.
VAL-71265
ThreadLockers
Includes a 6-oz. bottle of filter cleaner and
a 6-oz. aerosol can of filter oil.
KNN-99-5000
K & N Air Filter Cleaner
and Degreaser
Solvent 184
TM
This is an adhesive and
sealant for high-vibration
applications. HV-350 is
flexible, abrasion
resistant, sandable, and
paintable. Bonds to
glass, wood,
plastic, fiberglass,
metal, concrete, leather and more.
VAL-71155
VAL-71156 (with tube grip)
For more information on our
cleaners and chemicals,
please visit
www.racerpartswholesale.com
1-800-397-7815
21
Catoma Tents
Catoma Lone Rider Tent
The Lone Rider sets up in 30 seconds using Catoma’s patended Speedome system and immediately provides weather protection. With
the poles on the outside of the fly and the tent body suspended from it, the inner tent remains dry in inclement weather. The all screen tent
body also provides great ventilation. The Lone Rider breaks down as quickly as it sets up and provides a durable and easy to use shelter for
any soloist. This tent is truly everything you need in one package.
Features:
• Patented Speedome integrated pole system
• Special 2 wall design that allows for easy, weatherproof setup
• Bathtub floor & taped seams for added waterproofing
• Carry bag features roll down closer on large side of the bag for easy packing
• 2000mm Polyurethane waterproofing
• 2 doors for easy access
• Gear Loft included
Sleeps: 1
Weight: 7 lbs. 4 oz.
CAT-64596F ......................................Lone Rider Tent
Packed Dimensions: 26.5" x 6"
CAT-64596F-GS ............Lone Rider Ground Sheet
Center Height: 41"
Catoma 2 Up 2 Motorcycle Tent
The 2-Up 2's patented Speedome integrated frame system makes camping a breeze with easy set up in 60 seconds or less. Modified
from the popular 2-Up tent, the new version’s ventilation and usable space has been increased by adding a full screen back door with an
additional vestibule for your gear. The fly features an improved design to provide better weather protection for the roof vents as well as a
dry entry point into the tent in rainy conditions. The 2 Up 2 also features Catoma's
Organizer Pockets for all of your internal storage need.
Features:
• Single wall tent with pull out vents for air movement
• 2 doors and 2 vestibules for easy access and lots of storage space
• Gear Loft included
• Special accessory pockets organize all gear inside the tent
• Trail tent carry bag features roll down closer on large side of the bag for easy packing
• 2000mm Polyurethane waterproofing
• Bathtub floor and taped seams for added waterproofing
Sleeps: 2
Weight: 12.5 lbs 5.67 kg
CAT-64599F ..............................................2 Up 2 Tent
Packed Dimensions: 29.5" x 6" x 6"
CAT-64599F-GS ....................2 Up 2 Ground Sheet
Center Height: 56"
Catoma Switchback Tent
Why camp in cramped space when you can have all of the room you need with this durable tent! Featuring Catoma’s patented Speedome
integrated frame system, the Switchback sets up in 60 seconds with immediate weather protection. Need more space for your gear? The
Switchback includes a pull out vestibule with an aluminum pole to give incredible space. The Switchback includes a breathable inner tent
and roof vents on the fly for maximum air movement. Catoma’s organizer pockets and included gear loft provide ways to store your gear and
keep items in the right place for easy use.
Features:
• Extra vestibule space, simply add included aluminum pole
• 2 doors and 2 vestibules for easy access and lots of storage
• Special 2 wall design that allows for easy, weatherproof setup
• Gear Loft included
• Special accessory pockets organize all gear inside the tent
• Carry bag features roll down closer on large side of the bag for easy packing
• 2000mm Polyurethane waterproofing
• Bathtub floor & taped seams for added waterproofing
Sleeps: 2-3
CAT-64598F ....................................Switchback Tent
Weight: 15 lbs. 2 oz.
CAT-64598F-GS ..........Switchback Ground Sheet
Packed Dimensions: 33.5" x 8.5"
Floor Area: 6' x 7'4" x 59"
CAT-64541 ....................6 Replacement KingPin Stakes
CAT-64542 ......................Catoma Tent Awning Upgrade
22
Visit online for additional photos, videos and more!
www.racerpartswholesale.com
UltraLite Cot & Camping Equipment
er!
st
Be
ll
Se
UltraLite Cot
The UltraLite Cot packs down to 16" long by 5" diameter and
weighs less than 3 pounds for big-man 325lb weight rating. Or, if you
weigh under 200 lbs, leave two bows at home for a 2 pound cot. No end
bars, so tall guys sleep great too. Takes 3 minutes to assemble when totally
disassembled for the minimum packed size. Or use the new Fast-Pack
method and it goes together in less than a minute. No big muscles needed,
kids are strong enough to do it. Quiet sleeping, with no pins, bolts, or rivets
to squeek. The UltraLite Cot won't break if overloaded; the fabric top just
bottoms out on the ground. You sleep floating above rocks, sticks, roots,
water and snow. All materials are impervious to saltwater and sunlight. The
3-layer laminated ripstop fabric won't sag or rot. Sleep cool like a hammock
in hot weather or any foam pad on top
for winter insulation. The UL Cot can't
leak and go flat in the night and it's
thicker than any foam pad at 4.5"
[12cm]. Set the UL Cot across a
slope and sleep great on camp sites
that would make you slide off a foam
pad. 24" wide by 74" long. Includes
a ripstop nylon carry bag. Made in
the USA! RPW-ULC
Swedish FireSteel- Scout
UltraPod I
The UltraPod I is designed to be used
with point and shoot cameras, digital
cameras as well as remote flashes
and video lights. The UltraPod is
molded from high quality black
glass-filled Nylon with aluminum
threaded components, ready to
provide years of service for the most
demanding photographer. The
UltraPod can stand on fold-out legs with
non-slip feet, or attach to solid objects
with the Velcro strap. A unique ball and
socket camera mount assembly adjusts to
multiple positions quickly and easily.
Folds to a compact 4” x 1” x 1.25”
package. Weight: 2 oz.
Features:
• Sturdy, durable fold out legs
• Unique ball and socket camera mount
assembly for easy adjustment
• Strong Velcro strap for securing to any
sturdy object such as tree limbs, railings,
pack frames, trekking poles, or even
backstop at your little league games
• Folds to 4” length for easy packing
RPW-800 ......................................................................................UltraPod I
For more camping equipment, please visit
www.racerpartswholesale.com
Originally developed for the Swedish Department of Defense,
Swedish FireSteel is a flash of genius. Its 3,000oC spark makes fire
building easy in any weather, at any altitude. Used by a number of
armies around the world, Swedish FireSteel’s
dependability has already made it a favorite of
survival experts, hunters, fishermen and
campers. It has also found its way into cabins
and backyards as a fool-proof way to light
stoves and gas-barbecues. It lasts for 3,000
strikes. Weight: 1.1 oz. Color: red.
RPW-700 ....................................FireSteel-Scout
Survival/Rescue Knife
Developed by Tool Logic, the SL3 is a complete survival kit
weighing only 2.7 oz. A razor sharp blade with a spear point
shape, an all-weather FireSteel fire starter and a loud emergency
whistle makes the SL3 the natural choice for all outdoor activities.
The locking blade has sufficient curve for most
field chores and can be opened and closed with
one hand. The 50/50 serrations add utility in
both cutting and sawing. The SL3 is not only
well thought out, it is rugged enough to live up
to its slogan: Built for LifeTM.
Features:
• Built-in FireSteel fire starter
• 3.1 inch blade, 50/50 serrated
• Spear-tip point
• Emergency whistle
• Lanyard with flourescent clip
• Belt clip
RPW-701 ..........................Survival/Rescue Knife
1-800-397-7815
23
Camping Equipment
The Original Candle Lantern
UCO MightLite Compact Lantern and Torch
Our new MightyLites offer a lot of light in a small package. With a
0.5 watt Nichia LED, they provide 26 lumens of light with a long-lasting LED bulb. This one-piece flashlight with an aluminum housing,
converts into a lantern with a simple pull. The torch position focuses
the beam of light, while the lantern position allows the light to spread
for enclosed situations. The Mini version, perfect for travel and
emergencies, is 2.5 oz. (with battery). The XL version burns for
22+ hours, and is perfect for outdoors and camping. Use it as your
primary source of light or to keep packed in case of emergencies.
MightyLite Mini Features:
• Weighs 2.5 oz with batteries
• Uses 1 AA battery (Duracell included)
• 3.75” x 1” (4.75” long when opened)
• Carabiner and Carrying Strap included
• Burns 5-12 Hours
• Water Resistant
• Color: Red
RPW-500 ................................MightyLite Mini
MightyLite XL Features:
• Weighs 3.8 oz with batteries
• Uses 3 AAA batteries (Duracells included)
• 4” x 1.25” (5” long when opened)
• Carabiner and Carrying Strap included
• Burns 22+ Hours
• Water Resistant
• Color: Blue
RPW-501 ..................................MightyLite XL
This is the classic, long-burning collapsible Candle Lantern that has
provided warm natural light to thousands of outdoor enthusiasts for
decades. It is perfectly suited to backpacking, mountaineering, snow
camping and similar outdoor pursuits. The Original Candle Lantern
utilizes one UCO 9-hour candle, surrounding it in the safest, most
efficient lantern housing available anywhere. The lightweight
aluminum frame holds the glass chimney securely in place, creating
a windproof environment for the flame. And the unique Easy-Slide
chimney allows the glass to slide down into the lantern, making the
candle easier than ever to light. The spring powered candle tube
pushes the candle up as it burns, keeping the flame burning at a
constant height. A viewing slot on the side of the
lantern allows the user to monitor the slow burning
candle for remaining burn time.
Features:
• Carrying Handle/Hanging Bail
• Easy-Slide Glass Chimney
• Candle: UCO 9-hour or Citronella
• Polished Aluminum Finish
• Spring Loaded Candle Tube
• Aluminum Construction
• Twist Lock Base
• Candle Viewing Slot
Specs:
• 6.5” High (closes to 4.25”)
• Weight: 6.4 oz.
RPW-200 ..........................Original Candle Lantern
RPW-2001 ......................3-Pack of 9-Hour Candles
RPW-2002 ................3-Pack of Citronella Candles
The Mini Lantern
The design of the Mini Lantern does a superb job of utilizing readily
available “tealight” tub candles and expanding its capabilities to
include outdoor recreation and wider use around the home. Made to
the same high standards as the Original Candle Lantern, the
patented Mini Lantern features aluminum construction, a glass
chimney and a unique candle holder that keeps the tealight candle
stable. A specially designed vent in the base of the lantern provides
cool air to supply the flame with needed oxygen.
Features:
• Carrying Handle and Hanging Bail
• Aluminum Construction
• Polished Aluminum Finish
• Wind Resistant Glass Chimney
• Candle: Tealight Tub Candle (4-5 hour burn)
• Twist Lock Base
• Made in the USA
Specs:
• Dimensions: 4” High x 2.5” Diameter.
• Weight: 3.5 oz
RPW-100 ..........................................Mini Lantern
RPW-1001..................................6 Pack Tealights
24
Using Candle Lanterns in Tents
The image of a glowing tent in the wilderness night is an appealing
one. With a little common sense a UCO Candle Lantern is as safe
in a tent as other light sources, and much more appealing and
economical. A Candle Lantern produces warmth in a tent while
reducing condensation- try that with a headlamp! Always ventilate
the tent adequately, keep the heat shield away from tent walls, and
keep burning candle within sight. The result is a warm tent, plenty
of light to read by, and your headlamp’s batteries are preserved for
those times when you really need them.
Two Wheel Journal
A book called "Two Wheel Journal" is designed
to be a road trip and garage companion for
beginner and seasoned motorcyclists. The
journal provides a single place to record and
store valuable safety and travel information
along with motorcycle maintenance history,
pre-ride checklist, fuel history, tire history journal, contacts and medical information. Journal
entry pages are included for riders who like to
keep records and notes about their road trips.
MPC-TWJ
www.racerpartswholesale.com
JetBoil Cooking System & Butler Maps
JetBoil Flash Cooking System
Flash™ adds more enjoyment to your favorite outdoor adventure. Like all of Jetboil's innovative systems, Flash is an all-in-one design,
combining burner and cooking vessel in one compact unit. Everything you need is stacked and stored inside the 1.0 liter cooking cup. The
system lights with the click of a button and within two minutes provides two cups of boiling water for cocoa, coffee, instant soup or a gourmet
freeze-dried meal. The newly designed burner secures the igniter, protecting it from bumps along the road. The cooking cup clips onto the
burner, preventing accidental spills, and the fuel canister tripod ensures overall stability. The insulating cozy has a color-changing heat
indicator that signals when contents are hot.
Features:
• 1.0 Liter FluxRing® cooking cup with insulating cozy, featuring Flash color-change heat
indicator
• Adjustable stainless steel burner with push-button "through-cup" igniter
• Drink-through lid and insulating bottom cover/measuring cup
• Tripod base for added stability
Specs:
• Weight (without stabilizer) 14 oz (397 g)
• Volume 32 oz (1 Liter)
• Boil Time 16 oz (1/2 Liter) = 2 minutes
• Water Boiled 12 Liters per 100g Jetpower canister
• Dimensions 4.1" x 7.1" (104 mm x 180 mm)
Carbon Jetboil
Sapphire Blue Jetboil
JET-FLASH-CBN ................................................Carbon Jetboil Flash
with
Fuel
with Fuel
JET-FLASH-BLU ....................................Sapphire Blue Jetboil Flash
(fuel sold separately)
(fuel sold separately)
JET-PWR100................................................Jet Power Fuel 100 Gram
Coffee Press- Upgrade your backcountry beverage selection with JetBoil’s feather-light Coffee Press. Stem detaches from basket so you
can stow in your JetBoil cup. JET-COF075
Replacement Igniter Kit- Keep your Jetboil stove operating at peak performance with this replacement piezoelectric igniter for the Classic
JetBoil only. Not compatible with Flash or Helios systems. JET-MNT100
Jetset Utensil Kit
Outdoor MealKit
Utensil Kit includes spoon, fork, and spatula.
Utensils are long enough to comfortably reach
the bottom of the JetBoil cup. Handles
telescope to store compactly in or on Jetboil
cooking vessels. Lightweight and durable
high-temperature nylon. JET-UTNSFS
Spork
This spoon-fork-knife combo brings a bit of civilization to the
wild and a bit of the wild to civilization. The Spork is perfect
for motorcyclists! It is made of heat resistant polycarbonate
material so it won’t melt in hot/boiling water. It won’t scratch
non-stick cookware and is Teflon-friendly. BPA Free and
Machine Washable. Weight: 7 grams
RPW-710 ................................................4-pack, Multi-color
This kit is perfect for your backpack,
boat, picnic basket, even your lunch
box. The MealKit contains everything
you need to prepare and eat a meal
anywhere: two plates, a spill-free cup
with lid (300ml), a combined colander
and cutting board, a “Spork” and a
small waterproof box for all those
things that just have to stay dry.
Dishwasher and Microwave safe. BPA
Free. Weight: 11 oz. Optional Harness
has plastic buckle for easy hanging.
RPW-734 ......................Outdoor MealKit
RPW-735 ......................Meal Kit Harness
Outdoor
MealKit
MealKit
with
Harness
Butler Adventure Maps
Butler Motorcycle Maps highlights the best motorcycle roads! Experience every twisty
back road, scenic byway and open road on your next road adventure. Each and every
road segment detailed in the Butler Maps has been ridden and rated by an owner of
Butler Maps. From sport bikes to dual sport adventurer to two up tourers, Butler Maps
has diligently researched and presented fantastic riding experiences!
BUT-CO ..........................................................................................Great Rides of Colorado
BUT-ID ....................................................................................................Great Rides of Idaho
BUT-MT ............................................................................................Great Rides of Montana
BUT-UT ....................................................................................................Great Rides of Utah
BUT-WY ..........................................................................................Great Rides of Wyoming
BUT-S CAL ................................................................Great Rides of Southern California
BUT-6PK ........................Set Includes CO, UT, ID, WY, MT and 5 State Planning Map
1-800-397-7815
25
Rider Safety & Comfort
MX8 Motorcycle Visor Insert
Lighting conditions during a ride change
fast and your visor should too! Now you
may experience instant rider-controlled
tint and eliminate the need to wear
sunglasses or carry extra visors. With the
e-Tint® motorcycle visor insert, your
helmet visor will change instantly with
the quick touch of a button. Safety
features include a "fail safe"
mechanism which allows the insert to
default to clear in the event of a power
failure. Our superior anti-fog coating is
enhanced by the thermal qualities of
the double lens and serves for all
conditions riding. In addition, the
e-Tint® visor insert is fully
rechargeable via USB.
Blue Tint
Smoke Tint
ReflectGard MotoMan and
MotoLady Reflective Decal
This iconic image, custom cut from
ReflectGard, 3M's Scotchlite Reflective
Sheeting will enhance rider safety by
shining brilliantly when targeted by other
vehicles headlights. Sold in pairs only.
One facing right and one facing left. MotoMan pictured.
CG-R1013 ......................................Motoman- Black 1 pair 2.5" x 1.5"
CG-R1013-A ........................................Motoman -Black 1 pair 6" x 4"
CG-R1024 ..........................................Motoman- Red 1 pair 2.5" x 1.5"
CG-R1024-A ............................................Motoman- Red 1 pair 6" x 4"
CG-R1014 ......................................Motoman- Silver 1 pair 2.5" x 1.5"
CG-R1014-A ........................................Motoman- Silver 1 pair 6" x 4"
CG-R1013-D ......................................Motolady- Black 1 pair 6.5" x 4"
CG-R1024-D ........................................Motolady- Red 1 pair 6.5" x 4"
CG-R1014-D ......................................Motolady- Silver 1 pair 6.5" x 4"
ALM-MX8-BLUE ..................MX8 Motorcycle Visor Insert-Blue Tint
ALM-MX8-SMOKE ..........MX8 Motorcycle Visor Insert-Smoke Tint
ReflectGard 3M Scotchlite Bulk Reflective Tape
CrampBuster
Cut your own reflective designs with this 12" x 15 " sheet of bulk
Reflectgard by 3M.
CG-R10-1215BLK ..............................................Bulk Black 12" x 15”
CG-R10-1215RD ......................................................Bulk Red 12" x 15"
CG-R10-1215WHT ..............................................Bulk White 12" x 15"
The CrampBuster is the original motorcycle cruise assist.
Thousands of customers worldwide enjoy the ease of use of this
simple tool. See how a CrampBuster can benefit you today.
Benefits of Using the CrampBuster:
• Full throttle control with a relaxed hand
• Reduces hand fatigue and cramping
• Comfortably fits your hand
• Easier throttle operation
• Eliminates throttle "creep"
• Doesn't lock throttle on
CB-1 ..................................................Standard CrampBuster (pictured)
CB-2 ......................Standard CrampBuster with Short Wide Paddle
CB-3 ................Oversized CrampBuster with Long Narrow Paddle
CB-4 ....................Oversized CrampBuster with Short Wide Paddle
ReflectGard- Helmet Visibility Kit
ReflectGard reflective helmet kits add a custom-cut piece of
automotive-grade 3M Scotchlite reflective sheeting to your helmet,
making your helmet "light up" when targeted by another vehicle's
headlights! Includes custom-cut 3M Scotchlite reflective sheeting for
a single helmet.
CG-R1019 ..................................................Helmet Visibility Kit- Black
CG-R1025 ....................................................Helmet Visibility Kit- Red
CG-R1020 ..................................................Helmet Visibility Kit- Silver
Fogtech®
Raincoat® Advanced Water Repellent Coating
Water on plastic lenses, windshields or
faceshields can destroy your vision.
Easy to apply and long lasting,
Raincoat® repels water by beading
up the drops. Raincoat® has a special
wax blend that is suspended in a volatile
oil. These waxes are hydrophobic and
repel water by beading up the drops.
Because those beads of water have less contact with your plastic
optics, the larger ones run off with gravity or the wind. The
remaining water will appear as smaller and more rounded droplets
rather than a smear that distorts your vision. Each pouch will coat
about 8 sq. ft, which is many faceshields or goggles/glasses.
MTS-RCP-1 ................................................................Raincoat- 1 Pouch
MTS-RCP-5 ....................................................Raincoat- 5 Ct. Pouch Kit
26
Fogtech® is targeted specifically to
prevent fogging on today's high tech
plastics and glass. It quickly provides
crystal clear vision through safety goggles,
glasses, prescription glasses or face
shields. Advanced ingredients enable
Fogtech® to safely coat these lenses with
a transparent, long-lasting layer that
instantly soaks up fog before it can
obscure vision. The Single Step Application is designed to get you
back moving in seconds. No rubbing means your expensive eye
protection lasts longer without scratching or the wearing away of
expensive coatings. Each application lasts 3-5 days.
MTS-FTB ................................................................Fogtech 1 oz. Bottle
MTS-FTW-1 ......................................................Fogtech Wipe- 1 Pouch
MTS-FTW-5 ........................................Fogtech Wipe- 5 Ct. Pouch Kit
www.racerpartswholesale.com
AIRHAWK & BeadRider Seats
AIRHAWK Motorcycle Seat Cushions
The last mile feels like the first, thanks to AIRHAWK's® exclusive Shape Fitting
Technology®. Patented system eliminates painful pressure points and promotes
consistent blood flow for a longer, more comfortable ride. And it's fully customizable
and portable – use it on any bike, for any rider. Every AIRHAWK motorcycle seat
cushion is handcrafted from soft, pliable, non-hardening neoprene and features a
breathable, stretchable outer cover with a non-skid bottom, as well as tie-down straps.
It'll stay where you put it. Open mesh side panels allow air to circulate between the air
cells and out the side of the cushion, reducing heat build-up and keeping you cool and
dry. The cushion is waterproof, and the cover material is made of quick-dry material,
just in case it gets rained on. Small-interconnected air cells evenly distribute your
weight and pressure over the whole cushion, reducing the "hot spots" that cause pain.
The air cells also work as mini shock absorbers, reducing vibration. Once you've tried
it, you won't ride without it. 2-Year Limited Warranty.
Seating system comes standard with cover, attachment loops and cruiser straps.
AHK-CL ....................18” Deep x 14.5” Wide ......................................Large Cruiser
AHK-CM......................14” Deep x 14” Wide ....................................Medium Cruiser
AHK-CS ......................18” Deep x 12” Wide ........................................Small Cruiser
AHK-CPL ....................14” Deep x 11” Wide ..........................Large Cruiser Pillion
AHK-CP........................11” Deep x 9” Wide ........................................Cruiser Pillion
AHK-CL
Seat
Seat
Seat
Seat
Seat
AHK-CM
AHK-CPL
AHK-CS
AIRHAWK 2 Motorcycle Seat Cushions
AIRHAWK 2 cushions have many of the same features as the original AIRHAWK
cushions, however they are designed for intermediate riders that ride short to
mid-range distances. The main difference is the material: the AIRHAWK 2 is made of
polyurethane, which is lighter, thinner and does not stretch as much as the neoprene
in the original AIRHAWK cushions. Cushion comes standard with cover, attachment
loops, and cruiser straps. 1-Year Limited Warranty on Cushion. 6 Month Limited
Warranty on Cushion Cover.
AHK-AH2M ................14” Deep x 14” Wide ..........AIRHAWK 2 Medium Cruiser Seat
AHK-AH2S ................18” Deep x 12” Wide ................AIRHAWK 2 Small Cruiser Seat
AHK-CP
BeadRider Seats
Until they try a seat made of wooden beads, most people do not believe they can be comfortable.
BeadRiders allow air to flow between the rider and the saddle, keeping you dryer and cooler. If you
really want proof of the airflow, just use a set of BeadRiders on a cool day, and it won't take long to
convince you that cold air is flowing beneath you. Beaded seats also allow for the dispersion of
your pressure points over a larger area. Your comfort level while riding in the rain is helped by a set
of BeadRiders. The seat allows you to stay high and dry, while water drains through the seat below
you, instead of pooling underneath you. Available in two different materials- the traditional wooden
beads (Original BeadRider Seat) or reinforced ceramic composite beads (Ultimate BeadRider
Seat). If you are unsure what size you need, please visit www.racerpartswholesale.com for an
application guide.
Original Wooden Beaded Seats
BRS-1012 ........................10” x 12” Seat
BRS-1014 ........................10” x 14” Seat
BRS-1212 ........................12” x 12” Seat
BRS-1313 ........................13” x 13” Seat
BRS-1414 ........................14” x 14” Seat
BRS-1515 ........................15” x 15” Seat
Ultimate Ceramic Composite Beaded Seats
BRS-1014U ..........................................10” x 14” Seat
BRS-1212U ..........................................12” x 12” Seat
BRS-1313U ..........................................13” x 13” Seat
BRS-1414U ..........................................14” x 14” Seat
BRS-QR ..................................................................................................BeadRider Quick-Release Straps
Works with any BeadRider to allow you to remove your BeadRider without removing the bike saddle.
1-800-397-7815
27
LDComfort Undergarments & Coconut Socks
LDComfort™ Undergarments
Designed to protect your skin from damage that can occur on a long ride.
• Moisture rapidly wicks to outer layer and Inner Dry Layer protects skin from damage
• Seamless seating area without bulky and harmful padding
• Durable and long lasting
• Four-way stretch for form fitting comfort
• Traction strip in legs to prevent ride-ups
• Base layer protection acts as a chaffing buffer
• Anti-Microbial properties and material will not pill
• Machine washable and fast drying
• All Materials made in the USA
• Available in sizes Small to XX Large.
• Visit www.racerpartswholesale.com for sizing charts, FAQs, Videos and More.
Dryline Shorts
for Men
LDC-D60
Dryline Short Sleeved
Turtleneck Top
LDC-SS
Dryline Shorts
for Women
LDC-DW
Dryline Long Sleeved
Turtleneck Top
LDC-LS
Riding Tights
for Men
LDC-TM
Coconut Socks
The most Awesome Socks on the Planet! Natural Technology at its best—Function, Performance,
Durability—Guaranteed. These motorcycle socks offer optimum comfort, odor control, durability,
anti-microbial, moisture management and eco-friendliness! Activated coconut carbon, infused in yarns
made from natural coconut fibers, provides remarkable evaporative characteristics, odor management,
UV protection and durability. These socks are ideal for motorcycling as well as for a range of activities
beyond motorcycling including hiking, long jaunts of trekking, jogging, backpacking, at the gym or almost
anywhere the Most Awesome Socks on the Planet are needed! Made in the USA. Available in shorter
crew socks or tall socks.
RGR-CS976-S ....................................................Crew- Small- Women's 6-8
RGR-CS976-M ....................................................Crew- Medium- Women's 9-10/ Men's 8-9
RGR-CS976-L ....................................................Crew- Large- Men's 10-11
RGR-CS976-XL ................................................Crew- Extra Large- Men's 12-15
RGR-CS977-S ....................................................Tall- Small- Women's 6-8
RGR-CS977-M ....................................................Tall- Medium- Women's 9-10/ Men's 8-9
RGR-CS977-L ....................................................Tall- Large- Men's 10-11
RGR-CS977-XL ..................................................Tall- Extra Large- Men's 12-15
28
www.racerpartswholesale.com
Riding Tights
for Women
LDC-TW
Gloves
Street Rocket Gloves
Street Classic Gloves
Full grain goatskin leather over a spandex body for mobility, comfort
and durability. Double-stitched leather runs from below the knuckles
all the way up the fingers, covering an embedded, high-impact
polymer knuckle cage and knuckle caps at each knuckle, providing
full armor for ultimate protection. Knuckle cage is constructed to ride
with the motion of the hand and "tip when you grip". Embedded
GPact gel pads relieve stress and absorb shock and impact where
the fingers meet the hand and protects from "finger tingle". Leather
ulna pad protects wrist bone. Ergonomically constructed inset
thumb and precurve mimic the natural shape of the hand when
gripping handlebars. No fabric bulk in fingertips.
Features:
• Fully armored glove
• GPact gel palm pads
• Ergonomic design
• Anti-fatigue
• Four- point fingertip
construction
• High impact knuckle
protection
• Complete hand
coverage
• Serious protection for
serious riders
CHA-65484 ..........................Street Rocket Gloves- Medium/ Large
CHA-65487 ....................Street Rocket Gloves- Large/ Extra Large
Street classics adapt the proven ergonomic design of the popular
Street Ride Gloves to a comfortable, fingerless summer style.
Constructed of full-grain, top quality leather, the Classic features an
inset, Bolton-cut thumb, long-lasting double stitching at wear points,
and comfortable padding across the palm and base of the fingers.
Pads are securely stitched at strategic points to reduce bulk and
allow the hand to curve comfortably
around handlebars. Embossed leather
wrist strap fastens with hook-and-loop
to keep dirt and debris out, while
keeping the glove in place. A
comfortable warm-weather alternative
to full-fingered biker's gloves, Street
Classics provide a more secure grip,
plus shock and impact
protection from prolonged
contact stress.
Features:
• Full Leather
• GPact gel palm pads
• Ergonomic design
• Tab-closure cuff
• Easy-off finger pulls
• Bolton-cut thumb
• Colorfast
CHA-65450 ..........................Street Classic Gloves- Medium/ Large
CHA-65454 ..................Street Classic Gloves- Large/ Extra Large
Street Cruiser Gloves
Ultimate comfort and rugged durability in a classic goatskin bikers'
glove. Ergonomically tailored for comfortable fit over extended rides.
High-impact polymer knuckle cage and interior
protective caps over first finger joint. Embedded
GPact gel pads relieve contact stress where the
fingers meet the palm and the hand meets the
handlebars. Secure wrist tab closure strategically
positioned opposite the thumb keeps out wind.
Longer length cuff covers arm up to long-sleeved
shirt or jacket. Ergonomic construction mimics
the natural shape of the hand when gripping
handlebars. Four-point fingertip construction
eliminates excess fabric bulk in fingertips, for a
smooth, non-irritating fit all day
long.
Features:
• GPact gel palm pads
• Ergonomic design
• Tab-closure cuff
• High impact knuckle cage
• Finger joint impact protection
• Reinforced thumb saddle
• 100% color fast leather shell,
sidewalls and fourchettes
CHA-65466 ............................Street Cruiser Gloves- Medium/ Large
CHA-65470 ....................Street Cruiser Gloves- Large/ Extra Large
Street Ride Gloves
Made of full-grain, top quality leather, the Ride takes the traditional
biker's glove to a new level with the added benefits of safe and
comfortable ergonomic design. Leather sidewalls and fourchettes
between the fingers create a "3-d" glove designed to fit comfortably
on hands gripping handlebars. Pre-curved shaping and an inset,
Bolton-cut thumb accomodate the hand without bunching, blousing
or binding across the palm or thumb saddle. Shirred elastic gathers
at wrist keeps dirt and debris out, and allow for fast donning and
removal. The adjustable wrist strap secures glove in place. Extra
long cuff covers the wrist and arm to the cuff of a long-sleeved shirt
or jacket. Exclusive Gpact palm
pad hinged where the fingers meet
the hand provides shock and
impact protection where it's
needed.
Features:
• Full Leather
• GPact gel palm pads
• Ergonomic design
• Longer cuff
• Inset thumb
• Leather sidewalls
• Adjustable wind strap
CHA-65442 ................................Street Ride Gloves- Medium/Large
CHA-65446 ..........................Street Ride Gloves- Large/ Extra-Large
1-800-397-7815
29
Tire Pressure Gauges & Monitors
TireGard Motorcycle Tire Pressure Monitors
When riding your motorcycle, do you ever
wonder if your tires are set at the correct
PSI to maximize your riding experience?
The TireGard Tire Pressure Monitoring
System by Big Bike Parts is designed
specifically to support your tires and
maximize your riding experience.
Completely wireless with unique valve cap
sensors for real time monitoring, it is also
compact and lightweight. TireGard comes equipped with a
User-Friendly Graphic Interface that enables the rider to easily
understand and maintain the motorcycle in safe condition. TireGard
is fully adjustable to fit your riding style and comes with an anti-theft
option. TireGard helps maximize fuel efficiency and safety by
eliminating riding on under-inflated tires. Installation is a breeze and
does not require tire removal. Simply remove OEM valve cap (if you
have rubber valve stems, we recommend replacing them with steel
valve stems) and replace with the included valve cap sensor, turn on
the handheld monitor and ride. Don't wait, get one on your
motorcycle today and never wonder about your tire pressure again!
BBP-13-315 ....................Tire Pressure Monitor for Bike (2 sensors)
BBP-13-316 ..................Tire Pressure Monitor for Trike (3 sensors)
BBP-13-317 ..Tire Pressure Monitor for Bike & Trailer (4 sensors)
Programmable Tire Gauge
Features:
• Programmable to show the recommended front and
rear tire pressures. A quick press on the tire stem
displays the pressure on a bright blue background.
• The 90 degree tip is rotatable allowing for right or left
handed operation and will fit in the tightest spots. Even
a handy light is built-in for nighttime valve stem
illumination.
• This gauge is optimized for motorcycles—yet it works great
on auto, truck and bicycle tires too!
• Double-Bridge smart-chip micro-processor- Compensates for
ambient temperature, humidity and altitude variation. Provides
extremely accurate readings!
• Auto on/off and an easy-to-read, large digital display makes this
gauge the ultimate no-fuss tool. It's accurate to within ± 1% and
measures 5.0- 99.5 psi in half-pound increments
RGR-TG101 ..................................................Programmable Tire Gauge
Ready to Go Tire Gauge
• Functional- 90° valve fits in the tightest spots.
• LCD Readout- The easy-to-read
display measures 5.0-99.5 PSI in
half pound increments.
• Double-Bridge smart-chip
micro-processor- Compensates for
ambient temperature, humidity and
altitude variation. Provides extremely accurate readings!
• Valve Depressor- Built-in depressor is a twist of the wrist away for
quick air adjustments.
• Tread Depth Gauge- Retractable measurement tool allows for tire
life calculation and replacement assessment.
• Carrying Case- Durable carrier protects the gauge in a toolbox or
while on the road.
RGR-TG102 ..................................................Ready To Go Tire Gauge
30
Tire Gauges
Deluxe Tire Gauge- Our deluxe highaccuracy gauge comes with a large psi-scale
and a 2-1/2-inch face for quick, error-free
readings. It has a special shock-resistant
rubber gauge protector & an extra-long,
14-inch swivel hose. It has a super-quick
bleed valve. It’s simply the best! Available in
the following ranges 0-60 PSI, 0-60 PSI Liquid
Filled and 0-100 PSI. RPW-S
RPW-S60
shown
Standard 0-60 psi Tire Gauge- Same as the deluxe tire gauge,
however the hose whip is replaced with a straight, 14-in flexible
hose with non-swivel chuck. RPW-B60
Complete Tire Gauge w/Hold Feature- Our complete tire
gauge features a high flow pressure release button and swivel
chuck. Made with a straight, 14-in. flexible hose, this gauge holds
pressure until released. Available ranges: 0-15 PSI, 0-30 PSI, 0-60
PSI and 0-100 PSI. RPW-S-H
Standard Digital Tire Gauge
• 0 to 100 psi
• reads to 1/2 lb.
• Air pressure release button
• External gauge bumper
• Ultra flexible 14-inch line
LAR-50348
Longacre Glow-in-the-Dark Tire Gauge
• 0 to 60 psi by 1 lb.
• Air pressure release button
• Internal gauge damper for more accurate readings and
longer life
• 2” dial face. Ultra flexible 14” hose
LAR-50401
Hi-Tec Digital Tire Gauge
The tool of choice for anyone who is serious about proper
maintenance, performance, safety and tire longevity.
Features:
• Functional- 90° valve fits in
the tightest spots.
• Speaker and LCD ReadoutBuilt-in speaker clearly states
the reading. The easy-to-read display measures 5.0- 99.5 PSI in
half pound increments.
• Ergonomic Shape- Scientifically designed contours provide a solid
and comfortable fit in your hand.
• Hi-Grip Rubberized Texture- Non-Slip surface provides precise
handling and feel.
• Double-Bridge smart-chip micro-processor- Compensates for
ambient temperature, humidity and altitude variation. Provides
extremely accurate readings!
RGR-TG100 ................................................Hi-Tec Digital Tire Gauge
Additional Tire Gauges available online at
www.racerpartswholesale.com
www.racerpartswholesale.com
Tire Repair Kits & BestRest Cycle Pump
BestRest Tire Iron Bead BreakR
Stop & Go Motorcycle & ATV Tire Repair KitTube & Tubeless
This assortment of patches
and plugs provides you with
the tools & materials
needed to repair and
re-inflate your tire on the
spot. The enclosed Rasp
and Split-Eye Tool allows
you to plug your tubeless
tire on the wheel. No
bending or twisting is
necessary. You simply push the plug straight into the puncture and
pull the tool straight out. A twist of the Rasp tool inserted in the
needle eye releases the plug. A valve cap/core remover and
replacement core is included to insure that the re-inflation process
goes well. Even a towel with waterless hand cleaner is included in
this vinyl zippered pouch measuring 5" x 7 1/2" x 1" and weighing
only 1 lb. This kit also features (4) CO2 canisters and adapter.
SNG-1066 ............................................................................Tire Repair Kit
SNG-1091 ......................................................................3 Extra Canisters
Stop & Go Pocket Tire Plugger Plus
4 CO2 inflators 16 Gram
Why be stranded? This kit
gives you the ability to perform
the most effective repair
possible without dismounting
your tubeless tire. With the
addition of (4) 16 gram
canisters of 100% pure high
velocity CO2 gas and the 4"
fully flexible adapter with solid
brass fittings, this kit becomes
everything needed to repair and re-inflate your tire. This kit
measures 5" x & 7-1/2" x 1" and weighs only 18 ounces.
SNG-1001..............................................Tire Plugger Plus 4 Canisters
SNG-1091 ....................................................................3 Extra Canisters
Stop & Go Pocket Tire Plugger- Tubeless
This revolutionary new device easily installs mushroom shaped
rubber plugs into all tubeless tires while staying on the wheel. The
Plugging device 'drives' the plug into the hole with a turning of the
hex wrench. The plug expands
under pressure to fill the
punctured area. A firm pull on
the stem with your pliers seats
the mushroom head on the inner
wall allowing no air to escape.
This technology insures
maximum reliability while
reducing your downtime in any situation.
SNG-1000 ..........................................................Tire Plugger- Tubeless
The BeadBrakR is a levering device that incorporates a trio of tire
irons into the actual mechanical
design. When the bead is free, you
break down the device and use
those same tire irons to remove the
tire from the rim. Compact,
lightweight, and easy to assemble
using quick release ring pins, the
entire kit fits in your hand and rolls
up nicely in the storage pouch.
Overall size of the BeadBrakR and
all the accessories is just
2" thick x 5.5" wide x 12" long! BR-TIBB
BestRest Cycle Pump Adventure Model
At last there's an EASY way to fill a flat tire
or adjust your tire pressure on the road!
The CyclePump uses a powerful 12 volt
electric motor and a high quality metal
compressor assembly that's specially
hardened for motorcycle applications. The
CyclePump is proudly made in the USA
from precision crafted aircraft-grade aluminum alloys. The aluminum case is less
than 2" high x 4" wide x 6" long. With all
the wires and power connectors and hose
the storage pouch dimensions are
2” x 6” x 9". Weight is 34 ounces.
BR-CP-A
Stop & Go Mini Air Compressor
This 12V air compressor measures
only 4"x 2" x 6" making it possible to
be carried on virtually any motorcycle,
scooter or ATV. The built in gauge
reads up to 120 psi and it comes with
a built in LED light. Includes 4” tire
valve hose, 66” power cord, 12” extension alligator clips, 36” extension
lighter adapter and rugged zipper
carry case. Your motorcycle tire will be fully inflated in less than 10
minutes! Weight: 14 oz.
SNG-RCP ..........................................Stop & Go Mini Air Compressor
BestRest Oil Jug Triple Pack
Carrying a standard 1-quart plastic oil container on your bike wastes precious space.
OilJug™ is the answer. These compact
high density polyethylene jugs comply with
FDA regulations and they're ideal for transporting, storing or packaging a wide variety
of products, including oils. They can be
filled with your favorite lubricant or other liquid and reused hundreds
of times. The Triple Pack includes 1 each of a 4 oz, 8 oz, and 16 oz
jug. BR-OJ3
1-800-397-7815
31
Covers, Turntables & Flash2Pass
SafeTkick Sidestand Pad
Motorcycle Covers
Nothing is worse than putting your
sidestand down and having it sink into
soft soil or asphalt. For years, the
solution has been everything from
flattened drink cans to purpose made
plastic pads with retrieval strings
attached. The challenge has been
using your toe to slide the pad under
the sidestand foot without dropping the bike. This can be quite a
dance if done on loose gravel or wet slippery grass. The guys at
SafeTkick have come up with a unique product that ends this
problem forever. The SafeTkick pad has a telescoping handle with a
bright orange knob. When parking, just pull the SafeTkick pad out of
your tankbag or glovebox, extend the handle and simply place under
the sidestand foot. The orange knob even provides a bit of a buffer
zone to pedestrians. When it's time to go, hop on your bike, grab
the handle, pick it up, collapse the handle, store and go. It is just
over 4” x 6” in size. SAF-KICK
The Classic Series line of
BBP-4-443BC
motorcycle covers offers
exceptional value without
compromising the features you
have come to expect from
UltraGard®. Whether you need to
cover a large touring, cruiser or a
street bike, the Classic Series is a
great value without compromising
on quality, fitment or style.
Features:
• Tailor fit designs take into account
the natural stance of your
motorcycle.
• Water resistant polyurethane
coated polyester, protects against
weather, dirt and pollution.
BBP-4-491BC
• UV stabilized to maximize fabric
life and minimize color fading from
sun exposure.
• Scorch resistant heat shield protects the cover from hot exhaust
pipes and allows use of cover immediately after riding.
• Double stitched, four fold interlocking seams to provide the best
durability and a water tight closure.
• Zippered windshield and sissy bar pockets on cruiser covers
expand to fit many bike configurations.
• SoftTek windshield liner to prevent scratching.
• Sewn elastic hem and bungee cord ensures a tight custom fit.
• Convenient and compact storage pouch is easily portable.
• Five year warranty.
BBP-4-443BC ............Medium Cruiser Cover Black over Charcoal
BBP-4-491BC ............................Trailer Cover - Black over Charcoal
BBP-4-459BC ................Large Cruiser Cover Black over Charcoal
BBP-4-458BK ..................................Touring Bike Half Cover - Black
BBP-4-456BK ............................................Cruiser Half Cover - Black
BBP-4-444BC ..................Touring Bike Cover Black over Charcoal
Turn-A-Bike ST Motorcycle Turntable
The TAB ST low friction turntable allows the
motorcycle to pivot easily on its center stand.
Don't risk backing out on a busy street! Don't
ruin your floor by dragging your bike around
on the center stand. Protect your investment
from excess stress dragging around on the
center stand. This portable turntable solves both of these issues.
When positioned on the Turn A Bike, the center stand rides on the
turntable's top plate with no more stress than if it were simply
parked.
TAB-30101 ................................TAB ST Motorcycle Turntable
Turn-A-Bike Center Stand Dolly
Garage too small? Saddle up and park your
bike anywhere you want it.
• Built for motorcycles weighing up to
950 pounds
• Constructed of structural aluminum
• Three inch medical grade locking casters
• Weighs only 13 pounds
• Easy to use
• Non-marring on your garage or recreation room floor
• Rotate in place - Swing to store
TAB-30185 ..........................................................Center Stand Dolly
The Lid From Kid Helmet Organizer
Offers a great place to protect, store and ventilate your helmet and
gear. Mount it in your home, garage or trailer for safe transport of
your helmet. Your helmet can be strapped to the Lid From Kid for
added security. It allows your helmet proper
ventilation and safety from unwanted handling
while displaying your helmet and gear.
LFK-101 ..............................................Blue
LFK-102 ..............................................Yellow
LFK-103 ..............................................Red
LFK-104 ..............................................Silver
LFK-105 ..............................................Black
LFK-106 ..............................................Orange
32
Flash2Pass Garage Door Transmitter/Receiver
Flash2Pass electronically integrates the
activation of your garage door opener
remote into the high beam switch of
your turn signal lever. This unit
eliminates the need to shove your
garage door remote into your tank bag
or coat pocket while on your bike! The
Flash2Pass™ transmitter and receiver
are packaged as a set that is
pre-programmed at the factory (or you
can purchase them separately if needed). The Transmitter is a
radio frequency device that is mounted out of the way on your bike.
It is relatively small (approximately 2" x 2" x ¾") and is attached out
of the way on a bike with either the enclosed screws, or the plastic
zip tie. The wires are attached with Posi-Tap™ connectors to the
headlight high beam positive wire and to the ground wire. The
Flash2Pass™ transmitter is non-polarized so you can attach either
wire to the headlight wires.
FTP-102102 ..........................Garage Door Transmitter and Receiver
FTP-102300 ..............................................Garage Door Receiver Only
FTP-102200 ........................................Garage Door Transmitter Only
FTP-101301 ............................................................................AC Adapter
www.racerpartswholesale.com
Supplies
st
Be
r!
Tommy Tape
lle
e
S This self-fusing, non-adhesive
silicone tape can be used for protection
and insulation anywhere. It fuses to itself
within 24 hours and is capable of resisting
temps. of - 65° to + 500° F. 10’ rolls, 1" wide.
RPW-VP10001 ....6 pack- assorted
RPW-TT ..............specify white, black, yellow,
red, clear, grey, orange or blue
Racer’s Tape
Color choices are red, blue, green, white,
black, silver, yellow, purple and orange.
RPW-RT200 ......2-in. racer’s tape
Safety Wire Drill Fixture
Hardened drill guide locks your bolt in place
while you drill a hole for safety wire.
Accepts hex-head, 12-point and sockethead-cap bolt sizes #10 through 5/8”. RPW-9508
Safety Wire Twisters
Make your job of safety wiring much
easier with these high-quality
safety-wire twisters. Available in
either a 6” or 9” version with an automatic spring return.
RPW-SW6 ................................................6” safety wire twisters
RPW-SW9 ................................................9” safety wire twisters
Safety Wire
Stainless Steel Wire Screen
Safety wiring remains the most positive and assured
method of securing critical fasteners that must not be
allowed to back out; any tendency of the fastener to
loosen is counteracted by the tightening of the safety
wire. Comes in 1-lb., tangle-resistant dispensers.
RPW-SW20 ..............................................020 safety wire
RPW-SW32 ..............................................032 safety wire
RPW-SW41 ..............................................041 safety wire
Safety Wire Kit
24-inches by 36-inches.
RPW-SSM ............................................................8 Mesh, Medium, 3/32”
RPW-SSC ................................................................6 Mesh, Coarse, 1/8”
RPW-SSEC ..................................................4 Mesh, Extra Coarse, 1/4”
Tie Wraps
Perfect for wiring, hoses, etc. Packages of 100.
RPW-TIE4 ......................4” tie wraps
RPW-TIE8 ......................8” tie wraps
RPW-TIE11 ....................11” tie wraps
RPW-TIE14 ....................14” tie wraps
LAR-47840 ..........8” stainless steel (qty 8)
LAR-47842..........14” stainless steel (qty 4)
Buy the complete kit and save! Kit includes one spool each of
.020, .032, .041 safety wire; safety wire twister pliers; drill fixture
and storage box. RPW-SWKIT
TIRELIEFSTM Tire Pressure Relief Valves
• 3- 38 psi range
• Automatically relieves tire pressure
• Lightweight aluminum- only 9 gramswon’t affect wheel balance.
LAR-50000 ............................................set of 4
Dial Tread-Depth Gauge
Our dial tread-depth gauge is super-accurate!
It’s calibrated in 1/32-inch increments. It’s accurate to 1/128th of an inch (that’s less than 0.010
of an inch!) It’s easy to read, easy to use and it
comes with its own padded pouch. LAR-50560
Anti-Slip Material
• High-traction grit surface
• Keep your feet from slipping off pedals or
footpegs
• Adhesive backed
• 12-inches wide, sold by the foot
RPW-3200
Valve Core Stem Tool
Robic SC 507 Stopwatch
• Electroluminescent (EL) backlight illuminates entire
display, on demand
• Lap, split or single-event timing
• 1/1000-second precision to 24 hours
• Shows current running lap or split times
• Extra large display with large numbers
RPW-SC507
• Conveniently stores valve cores in the
handle
• Durable aluminum with stainless steel tip
• Includes 3 spare cores.
LAR-50270
Visit www.racerpartswholesale.com
for additional supplies!
1-800-397-7815
33
Jiffy-tite Fittings & Speed Bleeders
Be
Jiffy-tite Quick-Connect Fluid Fittings
s
tS
Jiffy-tite's revolutionary quick-connect fluid fittings provide unsuprassed performance under extreme
ell
conditions. These all-metal fittings easily disconnect and connect by hand in seconds! Made of lightweight,
er!
high quality aircraft aluminum, brass valves and stainless steel ball bearings, they are corrosion resistant for
extra long life. Because of this unique design, there are no servicable parts and you will never need to re-build or
replace these fittings. Perfect for fuel lines, they have a 100% leak proof seal once disconnected. The fittings will work
with any style hose except Teflon.
Internal View Of a
This is a perfect replacement for BMW’s problematic OEM quick disconnects.
Standard Jiffy-tite Socket
Stainless steel
The 21505E is a 90o socket that has been used on the LT models. How you choose to do the install will
ball bearings
determine whether a straight or 90o is needed. Purchase fittings separately or purchase one of our kits,
Stainless steel
which include fuel injection rated hose clamps.
collar spring
Brass
valve
JIF-21505 ....................................5/16” Straight- Socket Assembly, Barbed End
JIF-21505E ................................5/16” 90o Elbow- Socket Assembly, Barbed End
JIF-22505 ....................................5/16” Plug, Barbed End
JIF-QD1 ......................................Straight Kit- 2 straight sockets, 2 plugs and 4 fuel injection rated hose clamps
JIF-QD2 ......................................90o Kit- 2 90o elbow sockets, 2 plugs and 4 fuel injection rated hose clamps
Face seal
O-ring
seal
Stainless
steel
valve
spring
JIF-21505E
O-ring seal
JIF-22505
JIF-QD1
JIF-QD2
6061-T6 aluminum
JIF-21505
Speed Bleeder®
Bleeding your brake or clutch line has never been easier or simpler! Revolutionary double patented Speed Bleeder
replaces the original bleeder valve in your caliper/wheel cylinder with a spring loaded one way ball and check valve
design. The uniqueness of the stainless steel check ball is that it opens to allow the old fluid and air out, then closes
automatically between pumps preventing the old fluid and air from re-entering the line.
Visit www.racerpartswholesale.com for a complete application guide.
BMW
YEAR
REAR BRAKES
CLUTCH
prior to 2002
2002-2003
SB1010S
SB8125L
SB1010S
SB1010S
SB1010S
SB1010S
K1200LT
2002-08
SB7100S
SB1010S
SB1010S
K1200RS
R Models
1997-2000
up to 1994
SB1010S
SB1010S
SB1010S
SB1010S
R Models
1995- 96
SB1010S
R Models
R1150RT
R1200GS, RT
R1100RS, GS
R1150GS
1997 to 2001
2002-04
2005-09
2003
2004
R1150GS
2002
SB1010S
SB8125L
SB8125L
SB1010S
SB7100S
SB8125L (Evo)
SB1010S (Brembo)
SB1010S
SB1010S
SB1010S
SB6100
SB6100
SB6100
SB6100
SB6100
SB6100
SB6100
SB1010S
HARLEY DAVIDSON
FL
FX, XL
Dyna
XL883
FLHRSE3 Screamin Eagle
Sportster
Roadster 1200
34
FRONT BRAKES
K Models
K1200GT, RS
YEAR
1980- up
1978- up
1991- 2009
2005
2007
2004-06
2006-08
FRONT BRAKES
SB3824HD
SB3824
SB3824HD
SB8125L
SB3824
SB8125L
SB8125L
REAR BRAKES
SB3824HD
SB3824
SB3824HD
SB8125L
SB3824
SB8125L
SB8125L
www.racerpartswholesale.com
SB1010S
SB1010S
SB1010S
SB1010S
SB1010S
SB1010S
CLUTCH
SB1428
Hyper-Lites & Motolights
Standard Hyper-Lite Brake Light Kit
These legendary Hyper-Lites
superbright LED brake lights
completely encased in epoxy
wrapped in textured black ABS are
more than just "weather resistant"they run in rain, snow, heat and cold. Our brake light intensity level
was chosen to be bright enough to be hugely effective, but not
blinding or prone to induce road rage. Hyper-Lites are the original
and patented LED flashing motorcycle brake lights. All flashing
Hyper-Lite kits can be installed to flash continuously about three
times per second when braking or to flash for 5 seconds then go
solid. Select between 8 LEDs per light or 16 LEDs per light.
HYP-HLUNIV ..................................................8 LEDs per light (16 total)
HYP-HLU32 ..................................................16 LEDs per light (32 total)
Dual-Function Hyper-Lite Brake Light Kit
This kit features running lights at a
reduced (30%) intensity and full
intensity brake lights. Although
the running lights are only 30% as
bright as our brake lights, they are
still up to twice as bright as OEM
running lights and won't fade in bright sunlight. Some motorcyclists
are uncomfortable with the startling nature of flashing brake lights,
so we introduced modulators. They fluctuate between high (brake
light) intensity and low (running light) intensity rather than flashing on
and off. Still very effective, they are somewhat less noticable than
flashing brake lights. Can be configured as constant modulating or
5 second modulating then solid. Select between 8 LEDs per light or
16 LEDs per light.
HYP-DFUNIV ................................................8 LEDs per light (16 total)
HYP-DFU32 ................................................16 LEDs per light (32 total)
On/Off/On Switch
This 6 amp switch has a single power in and two
power out. The LED is lit when either circuit is
on. This switch is included in the Hyper-White
Running Lights/Modulating Running Light
Combination Set. HYP-TOGLED3
Motolights
Motolights are designed as
additional lighting in
conjunction with the OEM
headlamp of the motorcycle.
In daytime, they create 2
additional distinct points of light (not unlike
the ditch lights required on locomotives) to
increase the conspicuity of the motorcycle to
other vehicles. The OEM headlamp will light
the outside of the corner (where you don't
want to go) while the Motolights light the path
you are following through a corner. They use MR16 halogen lamps,
35watt, with an 8-degree beam spread (among the narrowest spots
in MR16 lamps) made by one of the premier lighting manufacturers.
Motolights offers free lamp replacement to the original purchaser.
The housings are cast aluminum, CNC machined, and come in
brushed, black powder coated, polished or chrome finish. Brackets
are machined from 6061-T6. Mounting brackets are precision
machined from aircraft grade aluminum and are specifically
designed to be mounted on the motorcycles caliper. The kit comes
complete with all necessary hardware, cable ties, hex head wrench,
3M inline wire tap, illustrated instructions and an 800 phone number
if you have problems. Each set is covered by a lifetime warranty to
the original purchaser as well as free bulb replacement. There is
also a 30-day refund if not completely satisfied. Motolights makes
this guarantee because their lights don't come back.
Motolight is built to be the best!
Part #
Application
MTL-67502-000
All FL Models 2000 & up H-D w/
Dual Disc
V-Rod up to 2005
Sportster 2005 and up
MTL-67502-001
1984-1999 H-D Touring Model w/Dual Disc
MTL-67502-007
BMW ALL 11/01/2001 and up
Honda 919, CBR F3
Kawasaki ZRX1200R
Triumph Tiger 05
Yamaha FZ6
MTL-67502-008
BMW 1995-10/01/2001 ALL
Hyper-White Running Lights
Hyper-White Running Lights/Modulating
Running Light Combination
In addition to two 16 LED white
running lights, this set also includes an
on/off/on switch with LED indicator, a
dual function controller with modulating
and full intensity solid circuits, 5 feet
each of extra power and ground wires,
and the Posi-Tap and Posi-Twist
connectors needed to install. HYP-MDFW16
Looking for a way to make oncoming
drivers notice you without tying up your
headlights? This is it! The
Hyper-White running lights feature a
pair of White 16 LED modules that put out 55,000 mcd each and an
on/off switch with LED indicator. Oncoming drivers see super high
output running lights. Your charging system sees a paltry 260 mA
current draw at 13.9 volts. These lights do not take the place of your
driving lights, but are hugely effective at alerting oncoming traffic of
your presence. They DO NOT project a useable volume of light on
the road. HYP-NFWRUN16
1-800-397-7815
35
Posi Products & Weather Pack Connectors
Posi-Lock Connectors have been put the to test worldwide
since 1997. Superior in-line splices with just hand tightening! These
electrical connectors are crimp in-line splices. An electrical
connector that meets the needs of todays OEM's, and is so good,
it's reusable. Truly a connector for the 21st century. Temperature
Range is -23oC to 120oC.
Posi-Lock 10-12 Gauge
Posi-Lock PL1210 Yellow
• 10 and 12 gauge wires
• Diameter: 9.6 mm Length: 38.2 mm
• Max. Insulation Diameter:5.2 mm
POS-PL1210 ................................Package of 5
Posi-Lock 14-16 Gauge
Posi-Lock PL1416 Blue
• 14 and 16 gauge wires.
• Diameter: 7.16 mm Length: 27.4 mm
• Max. Insulation Diameter:3.7 mm
POS-PL1416 ..................................Package of 5
Posi-Tap connectors allows you to tap into wires without
cutting! It installs in seconds by hand, with no crimping or tools
required. Total wire integrity is maintained and it powers up to 4
leads at once. It has less resistance, is vibration proof and fully
insulated.
Posi-Tap 10-12 Gauge Wire
• Powers (1) 10 or 12 gauge accessory leads.
• Max Accessory OD .205" (5.2 mm)
• Max Tap OD .145" (3.7mm) 12 ga, Min Tap OD
.085" (2.18mm)
POS-PT1012Y ........................................Package of 5
Posi-Tap 12-18 Gauge Wire
• Powers (1) 12, (2) 14, (3) 16 or (4) 18 gauge
accessory leads
• Max Accessory OD .205" (5.2 mm)
• Max Tap OD .145" (3.7mm) 12 ga, Min Tap OD
.085" (2.18mm)
POS-PT1218B ........................................Package of 5
Posi-Tap 16-18 Gauge Wire
Posi-Lock 18-24 Gauge
Posi-Lock PL1824 Red.
• 18, 20, 22, 24 gauge wires.
• Diameter: 7.16 mm Length: 27 mm
• Max. Insulation Diameter:3.2 mm
POS-PL1824 ..................................Package of 5
• Powers (2) 20, (1) 18, or (1) 16 gauge
accessory leads.
• Max Accessory OD .125" (3.2 mm)
• Max Tap OD .105" (2.7 mm) 16 ga, Min Tap
OD .072" (1.85) 20 gauge
POS-PT1618 ......................................Package of 5
Posi-Tap 20-22 Gauge Wire
Posi-Lock Flat Fuseholder
Incorporates the Posi-Lock® system. No
crimping required. Stranded wire connects
directly to fuseholder. 30 AMP max / 12-18
Gauge. DC Stranded Wire Application. Sold
individually. Fuse not included. POS-FF1218
Weather Pack Connector Kits
Wire like the pros with these locking weather pack connector kits.
Silicone seals protect against dust, dirt, moisture, and ensure a
fail-safe connection. Connector kits are available in one through six
pin configurations and include connector bodies. Male and Female
16-14 gauge terminal pins and green seals.
FAS-401-101 ..................................................................................One pin
FAS-401-102....................................................................................Two pin
FAS-401-103 ................................................................................Three pin
FAS-401-104 ..................................................................................Four pin
FAS-401-106 ....................................................................................Six pin
Replacement Pins (5 male and 5 female)
FAS-401-111 ........................................................................................20-18
FAS-401-112 ......................................................................................16-14
FAS-401-113 ......................................................................................12-10
Pin Extraction Tool
Required for safe removal of pins from
weather-pack housing. LAR-44909
36
• Powers (2) 20, (1) 18, or (1) 16 gauge accessory
leads.
• Max Accessory OD .125" (3.2 mm)
• Max Tap OD .075" (1.85) 20 ga, Min Tap OD .065"
(1.65)
POS-PT2022R ........................................Package of 5
Weather Pack Crimp Tool w/Crimp Dies
• Use with weather pack connector kits
• Rachet style crimper ensures a positive
connection
• Fast and easy
• Add the spark plug dies to make your own
plug wires.
LAR-44905
Fuseholders
Inline ATC Fuseholder - 10 Gauge
FAS-500-002
Fuse Kit
ATO/ATC automotive fuse assortment. Contains a total of 15 fuses,
3 each of the following values 5, 10, 15, 20, and 30 amp.
FAS-501-109
www.racerpartswholesale.com
Electrical Products
Centech AP-1 Auxiliary Fuse Panel
Relay Socket
Prewired relay socket for use with Bosch type
automotive relays. Features five 14 gauge
multi-colored 12" leads and are gangable.
Includes wiring diagram. FAS-200-001
Bosch OEM Relay
• Bosch P/N (0 332 209 150) SPDT automotive relay
• OEM on many applications
• Plastic housing w/ mounting tab
• 30 amp
FAS-201-002
Relay and Socket Assembly
12V SPDT 30 amp relay and prewired socket
with 12" leads. Many uses include controlling
fuel pump, water pump, fans, or any other
high current accessory. Diagram included.
FAS-900-000
Assorted Terminal Kit180 Piece
Includes in-line butt-splices, quick
disconnects, 22- 10 AWG closed ring and
open spade terminals.
RPW-05107
The AP-1's compact size (3.0" x 2.4" x 1.25") allows for easy
installation. Once the fuse panel is mounted, you simply attach the
positive and negative wire between
the power source (battery or relay)
and the heavy power studs on the
panel. This will allow the AP-1 to
supply safe, fused power for up to
eight individual electronic devices,
including radio, GPS and other
accessories up to 60 amperes. Each
AP-1 comes complete with fuses and
necessary hardware, instructions and
one year warranty. CEN-AP-1
Centech AP-2 Dual Fuse Panel
The AP-2 fuse panel is identical to the
AP-1 panel with the exception that the
AP-2 is divided into two electrical
sections. The main section contains
three fuses and feeds five outputs while
the second section has two fuses and
three outputs. The advantage of having
two sections is that it allows the
enthusiast to have fused power available
for devices which need constant battery
power and those which need to be switched "OFF" with the ignition
key. The AP-2 can handle a maximum of 60 amperes divided into a
40 ampere and 20 ampere section. The built-in GROUND section
handles a maximum of 60 amperes. The AP-2 can be connected
directly to the battery or to your ignition switch. Each AP-2 comes
complete with fuses and necessary hardware, instructions and one
year warranty. CEN-AP-2
Motorcycle Electrical Repair Kit
This handy repair kit contains a voltage tester,
crimping tool, fuse puller, test leads and 202
electrical parts for auto, truck, motorcycle and
RV repair. This kit needs to be in your trunk or
traveling toolbox! RPW-05207
High Temp Sleeving Kit
Kits include 3' length of Fastronix Ultra high temp
sleeving and (6) adhesive lined heat shrink ends to
hold and bond sleeving. Use to protect cables and
wiring from extreme heat areas.
FAS-140-110............................................3/8”
FAS-140-120 ..........................................1/2”
FAS-140-130 ..........................................3/4”
Pre-Cut Heat Shrink
1-1/4" long dual-wall heat shrink pieces with adhesive
liner allows you to quickly secure & weatherproof all
crimp terminals, wire splices & connections.
FAS-404-011 ..............................1/4”, 20 pack
FAS-404-012 ..............................3/8”, 15 pack
BestRest Universal Power Plug
The unique design of this male power plug allows it to fit a
european-style DIN (BMW) power outlet, or an SAE automotive
cigarette outlet. Your powering options
just doubled! To convert from a cigarette
lighter plug to a BMW plug, just pull off the
black ring. When you're done, replace the
ring and it'll fit the cigarette outlet again.
You'd be surprised just how handy this
dual purpose plug becomes. BR-PP-U
Circuit Breaker Panels
Simplify many automotive wiring
projects with these 4 gang circuit
breaker panels featuring automatic
reseting circuit breakers, 10-32 stud
terminals, common input bus bar
and all metal mounting bracket. Available in 10 or 20 amp
configurations for 12 volts.
FAS-950-001..................................................................................4-20 amp
FAS-950-002..................................................................................4-10 amp
FAS-950-000 ........................................2-10 amp & 2-20 amp CB panel
1-800-397-7815
37
Ctek Chargers & Electrical Products
US 800
Battery Charger
Multi US 3300
Battery Charger
Multi US 7002
Battery Charger
• Easily charges all small batteries.
• Excellent maintenance charger for
motorcycles and other seasonal vehicles.
• Automatically switches to maintenance
once battery is charged.
• Charges lead-acid batteries (Wet, MF, Gel
and AGM) from 1.2Ah to 32Ah, 1.2Ah to
100Ah for maintenence charging.
CTK-56171
• Especially well-suited for automotive use.
• Fast recharging and powerful maintenance
performance, even in the coldest weather
conditions.
• Charges lead-acid batteries (Wet, MF, Gel
and AGM) from 2Ah to 90 Ah.
• Three modes for small batteries, large
batteries and a special cold mode that is
suitable for AGM batteries.
CTK-56158
• Thorough 7-step process for charging,
reconditioning and maintenance.
• Also functions as a power source,
enabling in-place battery recharging w/ no
loss of power to the vehicle or to the
memory of vehicle electronics.
• Four options: 14.4V, 14.7V, 13.6V/Supply
& 16V/Boost.
CTK-56159
Comfort Connect
Cigarette Adapter
Permanently
mount Comfort
Connect with eyelet terminals on
your battery for fast and easy charging.
CTK-56261
Comfort Indicator Panel
Shows the status on the
battery and is perfectly
suited in the standard
panel on the vehicle.
CTK-56380
Comfort Indicator Eyelet
Shows the status on
the battery and is
perfectly suited for
permanent installation on batteries that are hard to reach.
CTK-56382
Comfort Indicator Clamps
Comfort Indicator
clamp easily shows
the status on the
battery. CTK-56384
Battery Lugs
• Flared end for easy cable insertion
• Heavy duty copper lugs
• For #2 or #4 cable
• Can be crimped or soldered
• Pack of 4
FAS-405-112 ................#4 gauge, 5/16”
FAS-405-113 ..................#4 gauge, 3/8”
FAS-405-012 ................#2 gauge, 5/16”
FAS-405-013 ..................#2 gauge, 3/8”
hole
hole
hole
hole
Ground Terminal Strip
This common bus
brass terminal strip
is the best and right
way to create a ground
circuit for your dash area or
accessories. Has (10) 8-32 screw
terminals and (2) 1/4-20 supply studs on an
insulated base with mounting holes.
FAS-406-210
38
CTEK Cig-Plug
enables charging the
battery through the
cigarette outlet.
CTK-56263
Need more information on
Ctek Chargers and
Accessories?
Visit our Ctek Battery Charger
category online for product
sheets and manuals.
Terminal Strip Kit
Deutsch Style Connectors
Use to eliminate splicing and simplify many
automotive wiring
projects. Contains
3 quality double row
terminal blocks (4, 6
and 8 position) with
6-32 screws and 40
16-14 gauge nylon
double crimp ring terminals. FAS-940-200
Fastronix sealed connectors provide
superior weather protection and is the
preferred choice of many top race teams.
The silicone gaskets and precision construction make for a
weather resistant
severe duty
construction. Mates
directly with Deutsch
DT series connectors.
Kits include all
necessary parts and
detailed instructions. 14-16 gauge pins.
13 amp/pin.
FAS-401-152......................................2-Pin Kit
FAS-401-153......................................3-Pin Kit
FAS-401-154......................................4-Pin Kit
FAS-401-156......................................6-Pin Kit
FAS-401-158......................................8-Pin Kit
FAS-401-162 ..................................12-Pin Kit
Battery Jumper Posts
Makes it easier to jump-start or
charge the battery; color-coded
red and black.
LAR-45720 ..................................red, positive
LAR-45740 ............................black, negative
www.racerpartswholesale.com
Odyssey Batteries & Battery Tender
Odyssey Batteries
The Odyssey battery combines in one box the characteristics of two separate batteries. It can deep cycle as well as provide enormous
cranking power. These batteries are capable of providing engine cranking pulses in excess of 1700A for five seconds as well as 400
charge/discharge cycles to 100 percent depth of discharge (DOD). Odyssey batteries will provide short-duration high amperage pulse or
low-rate with long-duration drains.
Features:
• Guaranteed longer service life (with a 10-year design life and a three- to eight-year service life,
Odyssey saves you time and money because you won’t have to replace the battery as often)
• Superior cranking and fast charge capability (The five-second cranking power of Odyssey batteries
is double to triple that of equally sized conventional batteries, even at low temperatures)
• Mounting flexibility (The Odyssey battery may be installed on its sides at any angle)
• Superior vibration resistance
PC-680MJ
PC-545MJ
• Two-year storage life when fully charged
• Deep discharge recovery
Odyssey Ultimizer Battery Chargers
• Designed specifically for Odyssey batteries only
• UL 815G listed
• 3-step charge profile ensures fast, complete & safe charge
• Continuous trickle charge keeps battery fully charged during extended periods of non-use
OMAX-12A-1B
• Sequential charging technology keeps triple bank chargers lightweight & compact
OMAX-12A-1B ......12A, single bank, for use with Odyssey PC Models 310, 535, 545, 625, 680 and 925 (pictured)
OMAX-25A-1B ......25A, single bank, for use with Odyssey PC Models 310, 535, 545, 625, 680, 925, 1200, 1500/34, 1500/34M, 1500/34-78 & 1700/65
Part #
Weight
(lbs)
Length
(in.)
Width
(in.)
Height
(in.)
Metal
Jacket
Cranking
Amps for
5 Sec.
PC-545MJ
12.6
7
3-3/8
5-1/8
Yes
545
PC-680
15
7-1/16
3
6-9/16
No
680
PC-680MJ
PC-925LMJ**
15.4
25.5
7-1/4
6-5/8
3-1/8
4-15/16
6-5/8
7
Yes
Yes
680
925
Application
HD 1991-1999 FXST, FLST
HD 2000-2003 FXST, FLST
HD 2007-2009 FXST, FLST, FL, FLH
BMW 1997- LT, GT
BMW 1998- R1200C
BMW 2000- R1150GS, R
BMW 1994-2000 R1100GS, R1100R
BMW 1993- R1100RS, RT
BMW 1999- R1100S
BMW 1997-2005- K1200RS
BMW- 1998- R1200C
BMW- 2005- R1200RT
HD1980-1996 FL, FLH, FLT, FLHT
HD 1997-2005 FLHR, FLHT, FLTR
** Note: This “L” part number has a left positive post. If the battery is sitting flat with the terminals on the side closest to you, the positive terminal is on the left.
Visit www.racerpartswholesale.com for a complete motorcycle application guide.
Battery Tender® Plus
Battery Charger
Differs from a
trickle charger
in that it
automatically
switches from a
full charge to a
float-charging
mode and then
monitors the battery. You can leave the
battery tender connected to a battery for
extended periods of time without worrying
about boiling or overcharging the battery.
Check fluid level monthly. The Battery
Tender Plus has a 10 year warranty and
temperature compensation.
BAT-TENDER
Digital Volt Meter 5 in 1
Chrome LED Volt Meter
Includes voltage monitoring from 11 to 16
volts with thermometer, ice alert, clock, stop
watch and lap counter. Velco attachment.
BBP-4-239
Features 10 LEDs in 5 different colors to
show voltage draw. The meter measures in
1/2 volt stages from an 11 to 15 volt range.
The meter unit measures 2-1/4" x 1" x 1/2"
deep and attaches with double sided tape
provided. BBP-13-303
1-800-397-7815
39
Powerlet Electrical Products
Powerlet Tank Bag Electrical Kits
Our Powerlet kits include what you need for a total solution! You may however need additional
adapters or internal modules to suit the electronics you may run. We recommend buying our kits,
but all Powerlet items are available separately for your installation. Pictured installed in
Marsee Tank Bag with optional cell phone cord.
Powerlet Kit Afor BMW’s, Triumphs and Ducatis
Powerlet Kit BInstalls Directly on Battery
This kit is your solution to powering items in your bag! Kit A is for
BMW's, Triumph GT, ST and Ducati’s with factory installed outlets.
This kit is your solution to powering items in your bag! Kit B is for
most bikes. Installs directly to battery.
Includes:
• Powerlet plug, right angle, 34" long. This plugs into your factory
plug socket already in your bike and runs up to the Powermate
outlet on the tank bag.
• Powermate Power Supply Socket. The Powermate outlet is the
piece that installs into your tank bag and gives you a standardized
viewport accessible inside your tank bag in a variety of internal
cables.
• Internal cable plugs inside tank bag into Powermate outlet. One
internal Y-cable provided with one SAE plug for electric clothing
and one cigar (large cigarette auto-style outlet) good for charging
cell phone, GPS etc. For those with more than one type of device,
you may need to order additional cables.
MAR-KIT-A
Includes:
• 48" long fused battery lead. This easily installs onto battery and
cable runs up to the Powermate outlet on the tank bag. Includes
fuse. This cable should reach from battery to front of tank bag.
• Powermate Power Supply Socket. The Powermate outlet is the
piece that installs into your tank bag and gives you a standardized
viewport accessible inside your tank bag in a variety of internal
cables.
• Internal cable plugs inside tank bag into Powermate outlet. One
internal Y-cable provided with one SAE plug for electric clothing
and one cigar (large cigarette auto-style outlet) good for charging
cell phone, GPS etc. For those with more than one type of device,
you may need to order additional cables
MAR-KIT-B
Build Your Own Powerlet Kit!
To build your own kit, select an external power source. Then purchase the Powermat Kit (PWR-PTB-001) and add any internal
connectors you need. Or make it simple and purchase Powerlet Kit A or Kit B from above.
External Power Sources
Powerlet to Powermate
Cable- Straight
Power your tank bag from a BMW, Triumph,
Ducati or Powerlet socket. Manufactured
with a Powerlet Deluxe Cable and 16 AWG
wire. Similar to PAC-011, but with a straight
connector.
PWR-PAC-009-24 ......................................................................24” Long
PWR-PAC-009-30 ......................................................................30” Long
Powerlet to Powermate
Cable- Right Angle
Power your tank bag from a BMW,
Triumph, Ducati or Powerlet socket. Runs
from bike outlet to Powermate.
Manufactured with a Powerlet Deluxe
Cable Plug and 16 AWG wire. Lower profile with right angle end.
PWR-PAC-011-06 ........................................................................6” Long
PWR-PAC-011-12 ......................................................................12” Long
PWR-PAC-011-18 ......................................................................18” Long
PWR-PAC-011-24 ......................................................................24” Long
PWR-PAC-011-30 ......................................................................30” Long
Battery Lead
Power your tank bag directly from your
battery. Runs from the battery to the
Powermat Kit. Works on most bikes. This
15 amp fused battery lead is manufactured
with 16 AWG wire. Includes 1 fuse.
PWR-PKT-001-24 ....................................................................24” Long
PWR-PKT-001-48 ....................................................................48” Long
40
SAE Extension Cable
Compatible with all brands of SAE
connectors. This handy extension
cable is perfect if you need more
cable length.
PWR-PAC-022-24 ......................................................................24” Long
www.racerpartswholesale.com
Powerlet Electrical Products
Powerlet Front Panel Socket Kit
Our most popular panel kit. The
48 inch length is perfect for
reaching from an under-the-seat
battery to a front panel.
PWR-PKT-042-48
Powerlet Side Panel Socket Kit
This 24 inch length works very well on metric cruiser, Harley
Davidson, and sportbike side panels. This kit works equally well on
front panels for bikes with the battery in the front fairing.
PWR-PKT-042-24
The Powermate Kit
Molded plastic SAE flange mounts conveniently into any tankbag or saddlebag (soft or hard sided
luggage). Easy to install, this bulkhead connector permits power to be passed through the luggage wall.
The Powermate includes: Anodized backing plate, black oxidized stainless screws, stainless Ny-Lock
nuts, plus detailed instructions. Internal plug is SAE male. External plug is SAE female. To build your
own Electrical Kit, purchase this item, plus an external power source and the internal cables that you
require for your devices. PWR-PTB-001
Internal Cables
Powerlet to Garmin 4-pin Coil Cord
Works with various Garmin models including
the Garmin III+, V and Streetpilot requiring
Garmin's 4-Pin round connector.
Features a 36" coil cable and Powerlet
Right Angle Plug. PWR-PPC-001
Powerlet to Escort Power Cord
Works with Escort Radar Detectors. These
cables directly connect your detector to a
Powerlet Socket. PWR-PPC-004
Powerlet Cigarette Adapter
Connects any cigarette plug to a Powerlet socket.
10” approximate length. PWR-PAC-002
Powerlet Plug to Banana Plug
Used around the shop to plug into a Powerlet
socket and check the state of a battery; useful to
diagnose charging problems. 18" long with
standard banana plug. PWR-PAC-003
Powerlet to 2 SAE
Ideal to split your Powerlet socket into 2 SAE’s.
PWR-PAC-006
Powerlet Plug to
2 Powerlet Sockets
Splits a single Powerlet socket into 2.
PWR-PAC-007
Powerlet to SAE Cable
Powerlet Basic Plug To SAE
Manufactured with a basic plug (PPL-001) and
18awg wire. Ideal solution to connect a battery
charger through a Powerlet socket. 12” long.
PWR-PAC-008
Manufactured with a deluxe plug (PPL-002) and
16awg wire. Ideal for connecting a battery
charger, heated clothing or Luggage Electrix
through a Powerlet socket.
PWR-PAC-009-24 ............................24” Length
PWR-PAC-009-30 ............................30” Length
1-800-397-7815
41
Powerlet Electrical Products
Powerlet Super Plug to SAEHeavy Duty Cables
Manufactured with a super duper plug (PPL-003) and 16awg wire.
Ideal solution to connect a battery charger, heated clothing or
Luggage Electrix through a Powerlet socket.
PWR-PAC-010-06 ..............................6” Length
PWR-PAC-010-12 ............................12” Length
PWR-PAC-010-18 ............................18” Length
PWR-PAC-010-24 ............................24” Length
PWR-PAC-010-30 ............................30” Length
Powerlet to SAE Cable
External cable for powering SAE Luggage Electrix Bulkheads. Low
profile right angle plug (PPL-004) for maximum clearance. Can also
be used to convert a battery charger or SAE heated
clothing to a Powerlet socket.
PWR-PAC-011-06 ................................6” Length
PWR-PAC-011-12 ..............................12” Length
PWR-PAC-011-18 ..............................18” Length
PWR-PAC-011-24 ..............................24” Length
PWR-PAC-011-30 ..............................30” Length
24" Powerlet to Cigarette Socket Cable
Convert any device that has a cigarette type
plug to a Powerlet socket (BMW type),
including cell phones, radar detectors, air
compressors, etc. Designed to reach inside
tankbags, this cable uses a low profile right
angle plug. PWR-PAC-012
SAE Y-Cable
Converts one SAE into two SAE's. Great for
Luggage Electrix or for powering two heated
vests from one SAE battery lead. 6" long.
PWR-PAC-023
SAE to Cigarette Socket and
Powerlet Socket Y-Cable
Convert one cigarette socket & one Powerlet
(BMW type) socket. Good for cell phones, radar
detectors, heated vests & GPS units. 6" long.
PWR-PAC-027
Powerlet to Two
Cigarette Sockets
Connect two cigarette plugs to a Powerlet
socket. Approx 10" & 12" long leads.
PWR-PAC-028
Powerlet to Cigarette &
Powerlet Socket
Connects any two devices that have a
cigarette type plug to a Powerlet socket
(BMW type), including cell phones, radar
detectors, air compressors, etc. 8" & 10"
staggered length. PWR-PAC-029
SAE to Dual Cigarette
Socket Y Cable
Convert one SAE connector to two cigarette
sockets. Good for cell phones, radar detectors &
GPS units. 6" long. PWR-PAC-030
Powerlet to Dual Cigarette Socket Coil Cable
Connects any two devices that have a cigarette
type plug to a Powerlet socket (BMW type),
including cell phones, radar detectors, air compressors, etc. Coil cord is 24" then stretches to
over 4 ft for easy connection. PWR-PAC-031
SAE to Cigarette Socket Cables
Convert a SAE Luggage Electrix lead (Battery
Tender harness) to a Cigarette socket. Good
for cell phones, radar detectors & GPS units.
Carry this in case of an emergency, plugs into
any Battery Tender lead!
PWR-PAC-024-12 ..........................12” Length
PWR-PAC-024-18 ..........................18” Length
SAE to Powerlet Socket Cable
Convert a SAE Luggage Electrix lead (Battery
Tender harness) to a Powerlet socket. 6" long.
PWR-PAC-025
SAE to 2 Powerlet Sockets Y Cable
Convert one SAE connector to two Powerlet
sockets. 6" long. PWR-PAC-034
SAE to Cigarette and Coax Y Cable
Convert one SAE connector to a cigarette socket
and one coax for a heated garment. Good for cell
phones, radar detectors & GPS units along with
powering Powerlet, Gerbing's or Warm & Safe
heated clothing. 6" long. PWR-PAC-035
SAE to Cigarette Socket
and SAE Y-Cable
Convert a SAE connector or Battery Tender pigtail
into one cigarette socket & maintain the SAE.
Good for cell phones, radar detectors, heated
vests & GPS units. 6" long. PWR-PAC-026
42
Additional Powerlet Products Available.
Please call with your specific needs.
1-800-397-7815
www.racerpartswholesale.com
Techmount Mounting System
Techmount has been designing, developing and manufacturing high quality products
since 1995. As motorcyclists and motorcycles become more technically oriented, the
need for additional accessory mounting means become vital. All the mounting tools
required for installation come with the products and there is no drilling or fabrication
required for installation. Techmount products are 100% American made and are machined from T6 6061 aluminum to precise
tolerances then plated with durable anodize or chrome finish. All hardware used is stainless steel.
Handlebar Mount
Techmount's Third Generation Handlebar Mount has no need for a shaft,
which makes this mount very strong and compact. Techmount combined
handlebar sizes from 7/8" (22mm) up to 1-1/4" (32mm) into one mount
system. This allows it to fit virtually every motorcycle with tubular handlebars.
Requires only 3/4" of handlebar space and can be mounted at any angle.
TEC-3-30912 ..................................................Black with 1-3/4” Shaft
TEC-3-30912S ................................................Silver with 1-3/4” Shaft
TEC-3-30912C ..........................................Chrome with 1-3/4” Shaft
TEC-4-30912B ..................................................Black without a Shaft
TEC-4-30912S ..................................................Silver without a Shaft
TEC-4-30912C ............................................Chrome without a Shaft
TEC-3-62030 ..........................................................Black 3” Extension
TEC-3-30912
TEC-3-30912C
Euro Mount Systems
Euro Mount Systems mount onto the top of the fork tube on many
European sport bikes. This system is easily installed by sliding
the clamp over the fork tube that protrudes from the top triple
clamp and tightening the tension screw. Since each Euro Mount
is machined to match the fork tube diameter, once installed it
looks as if it’s part of the bike. Silver color.
Top Plate
TEC-70048
TEC-70050
TEC-70051
TEC-70052
TEC-70053
TEC-70058
........................48mm
........................50mm
........................51mm
........................52mm
........................53mm
........................58mm
Wide Top Plate
Small GPS/XM replacement top plate
with rubber bushings. This adds a level
of vibration dampening to your device.
Useful when you wish to dedicate the
mount for a specific use. (Has the same
hole pattern as TEC-60003, Quick
Change Adapter). TEC-60991
Converts your standard top to a 2.5” x 5” wide
top plate. Useful when mounting one wide
device or two small ones side-by-side.
TEC-60996 ..............................................Black
TEC-60996C ............................................Silver
Quick Change Adapter
Double Top Plate Kit without Shaft
Convert your Stem Mount to a Dual Top Plate
system. Useful when mounting two devices
that need to move separately. TEC-60997
Double Top Plate Kit with Shaft
Makes changing accessories a snap. Mount the
device to the Quick Change plate and then slide
it onto any standard Techmount top plate and
fasten from the back with the thumb screw.
TEC-60003
Small Cell Phone/Ipod Cradle
Convert your Ball/Socket Mount to a Dual Top Plate system Useful
when mounting two devices that need to move separately.
TEC-60998
Requires Quick Change Adapter
TEC-60003. TEC-1170
Visit www.racerpartswholesale.com or call
1-800-397-7815 for other Techmount Products.
Requires Quick Change Adapter
TEC-60003. TEC-25310
Large Phone/PDA Cradle
1-800-397-7815
43
#
RAM Mounts
RAM is the revolutionary universal ball and socket mounting system that allows you to
mount practically anything anywhere. RAM Mounts are unique in design, providing easy
installation, strength, versatility, vibration protection and durability, all at a low cost.
RAM Mounts are backed by NPI's renowned Lifetime Warranty which makes them the
mounting systems of choice. Select a base, arm and holder for your specific needs.
Ram Base
with U-Bolt
Ram 2.5" Base
with 1" Ball
RAM-B-231 (pictured)
3/4”-1” diameter
RAM-B-231-1U
1-1/4” diameter
Ram Motorcycle Base
with 1" Ball
RAM-B-202
Ram Reservoir
Cover Center
Ball
Ram 2-7/16" x 1-5/16"
Base with Ball
The RAM universal plate has
a 1.0" diameter rubber ball
connected at right angles
to a 1-1/4" x 2-1/2"
diamond plate. The plate has
two holes 1.912" from center to center,
positioned at either tip of the diamond
plate. This base plate will attach to any of
the RAM composite HOL holders and the
industry standard AMPS hole pattern.
RAM-B-238
RAM-B-345U
Ram Reservoir
Cover Side Ball
RAM-B-346U
Ram Cycle Pivot
Base with Stud
Ram Base Adapter
for Tom Tom Rider
RAM BASE
2" X 3"
with 1" BALL
2-7/16” x 1-5/16” base
RAM-B-238-T02U
RAM-B-202U-23
The image to the left
shows the TomTom
Rider unit mounted with
a Ram B-231-1U U-Bolt
Mount, a B-201 Arm,
and B-238-TO2U Tom
Tom Rider Adapter.
The RAM-B-309-1 (single 1" ball) and
RAM-B-309-2 (double 1" ball) mount bases
are part of the RAM 309 Clutch/Brake
Motorcycle Family. These bases connect
to your handlebar clutch/brake clamp, left
or right side, and hold one or two
1" diameter mounting balls. The base fits
the control clamps on your motorcycle with
40mm x 6mm stainless steel hardware,
provided in the kit.
RAM-B-309-1 (pictured) ....With 1- 1” Ball
RAM-B-309-2 ....................With 2- 1” Balls
Ram Base with
9mm Hole & 1" Ball
Made of die cast marine
grade aluminum,
durability won’t be a
concern. The Twist and
Tilt™ can turn 360
degrees. The 1" ball can
be rotated forward and back 90 degrees.
The Twist and Tilt™ Mount includes the
following male threaded screws: ¼”-20,
M6-1.0, M8-1.25, M10-1.25 RAM-B-360U
This part is often used
on motorcycles to
attach to the mirror
frame (mainly BMW).
RAM-B-272U
Ram
Motorcycle
Stem Base
with 1" Ball
RAM-B-342U
Ram Double Socket Arm for 1" Balls
The double socket arm has a socket at either end to allow 1" diameter ball accessories to be
connected. A tightening screw on the side of the arm enables the sockets to clamp firmly to a
RAM 1" diameter ball. When loosening the side screw, a single spring inside the arm opens the
sockets allowing you to pivot the ball and socket connection or completely disconnect the ball from
the socket. 1.75”, 3” and 6” lengths are available (measured socket to socket).
RAM-B-201 ....................................................................3” Long Arm, Black
RAM-B-201-A ................................................................1-3/4” Short Arm, Black
RAM-B-201-C ................................................................6” Long Arm, Black
RAM-B-201-CHU ..........................................................3” Long Arm, Chrome
RAM-B-201-ACHU
RAM-B-201-ACHU ........................................................1-3/4” Short Arm, Chrome
44
www.racerpartswholesale.com
RAM-B-201
RAM Mounts
Ram Aqua Box
The RAM Mount Aqua Boxes provide sealed
enclosure and
protection for your handheld devices. The clear,
touch through screen allows you to view your
electronics as well as use their function keys
while in place. Available in two sizes.
Medium- RAM-HOL-AQ2U:
Internal Dimensions: Width 2.88", Height 5.75",
Depth 1.88"
External Dimensions: Width 4", Height 6.5",
Depth 2"
Small- RAM-HOL-AQ3U:
Internal dimensions: Width 2.38", Height 4.63", Depth 1.13"
External Dimensions: Width 3.5", Height 5.25", Depth 1.5"
Universal Rugged PDA
Adjustable Holder
Be
st
This cradle is designed to hold the following devices:
Apple iPhone 3G, iPhone 3G S & iPhone 4
Blackberry Bold & Storm 2
HTC Droid Incredible, Evo 4G & G2
Motorola Droid Pro, Droid 2 & Droid X
Nokia N8, N900 & X6
Samsung Galaxy S & Wave
Windows Phone 7
Cradle Clamping Dimensions:
Height Range: 4.75" - 6.25"
Width Range: 2.25" - 3.25"
RAM-HOL-PD3U
Se
lle
r!
Universal Electronics Holder
Ram Mount for Apple I-Phone 3G
The RAM cradle is designed to hold the Apple
iPhone 3G and Apple iPhone 3G S. Note: this unit
will not hold the 1st Gen iPhone or the iPhone 4G
or phones with cases or covers.
RAM-HOL-AP6U
Ram Mount for Apple I-Phone 4
The RAM cradle is designed to hold the Apple iPhone
4. Note: this unit will not work with phones with
cases or covers. RAM-HOL-AP9U
Designed to hold a large amount of cell phones
and electronic devices, including Blackberry,
HTC Evo, Droid X, 2-Way Radios, GPS
Devices and more. Comes with 3 sets of four
flexible rubber coated fingers placed along
sides to grip your device. The fingers open by
squeezing the ends to open the small finger
arms. The bottom of the holder includes a back
plate that adds support to the device being
held by the mount.
Cradle Clamping Dimensions:
Height Range: 5.25" - 6.00" (back plates can
be removed for larger devices)
Width Range: 1.25" - 3.5"
Depth Range: 0.75”- 1.6”
RAM-HOL-UN4U
Visit www.racerpartswholesale.com for
additional phone and electronics holders.
Ram Holders for Garmin GPS Units
With mounts available that are perfect for cars, trucks and motorcycles, RAM is your best choice for your Garmin GPS units. Able to connect
to the units in seconds, RAM can get your GPS exactly where you want it so it’s easy to read and use. Simple design that will not block or
interfere with any function of the Garmin. Most Holders do not include a mounting ball.
Ram Holder Garmin Nuvi
300, 310, 350, 360 & 370
RAM-HOL-GA21U
Ram Holder for Garmin Nuvi 660
RAM-HOL-GA23U
Ram Holder Garmin 60 Series
For Garmin 60 Series GPSMAP 60, 60C and 60CS
RAM-HOL-GA12
Ram Holder Garmin Quest
RAM-HOL-GA15U
Ram Holder Garmin Nuvi 500
RAM-HOL-GA32U
Ram Holder for Garmin
StreetPilot Series
For Garmin StreetPilot C320, C330, and C340.
Comes with Ball on back.
RAM-HOL-GA19U
For more information and expanded model compatibility,
please visit www.racerpartswholesale.com
1-800-397-7815
45
#
Chatterbox Communication Systems
Chatterbox XBi Wireless IntercomRider to Passenger Communication
This unit allows rider to passenger
communication via CDMA crystal
clear technology, using either voice
activation or push-to-talk. Both
rider and passenger module is
capable of pairing with up to two
accessory devices at the same
time. (ex. iPod, Mp3, satellite radio,
GPS, cell phone, radar detector).
SMART technology will
automatically prioritize the
transmission of the paired devices.
The XBi is so far advanced that it
can even stream music from one
XBi Full Face Kit
module to the other. Each module
is also capable of being used by itself to pair accessories when
riding alone. Other features include: Li-Pol (lithium polymer)
rechargeable battery with 6-8 TRUE hours of power, 1 hour express
charge, noise suppression Hi-Fi headset, compact aerodynamic
module design. Note: Each kit comes with everything you need for
1 helmet.
Kit Includes:
• XBi Unit
• Dynamic Noise-Supression Microphone
• Hi-Fidelity Speakers
• Rechargeable/Replaceable Li-Poly Battery
• Mounting Hardware
• AC/DC Home Charger
CBR-CBXBiFKIT ........................................................XBi Full Face Kit
CBR-CBXBiOKIT ....................................................XBi Open Face Kit
Chatterbox XBi2 Wireless IntercomRider to Rider Communication
The XBi2 is Chatterbox’s latest bike-toXBi2 Unit
bike wireless intercom that also comes
equipped with A2DP Bluetooth
technology. It has all the features that
the XBi has, but with additional power
that will allow simultaneous
communications between 3 riders.
Works up to 500 meters of range in
optimum conditions. Each module is capable of pairing with up to
two accessory devices at the same time. It will allow for up to 6-8
hours of true talk time and 48 hours of standby time on one charge.
Note: Each kit comes with everything you need for 1 helmet.
Kit Includes:
• XBi2 Unit
• Dynamic Noise-Supression Microphone
• Hi-Fidelity Speakers
• Rechargeable/Replaceable Li-Poly Battery
• Mounting Hardware
• AC/DC Home Charger
CBR-CBXBi2FKIT ....................................................XBi2 Full Face Kit
CBR-CBXBi2OFKIT ..............................................XBi2 Open Face Kit
Chatterbox XBi and XBi2 Headsets Only
Have a new or extra helmet you want to
use your XBi or XBi2 unit with? Simply
purchase the additional headset to install
in your second helmet and use your own
XBi or XBi2 unit.
CBR-CBXBiFHS..........................................................Full Face Headset
CBR-CBXBiOHS ......................................................Open Face Headset
Chatterbox DC Power Filter Cord
With the Chatterbox DC power filter cord there
are no worries of the batteries in your unit going
dead. Wire directly to your bike's power.
CBR-CBXBiPREX
Chatterbox XBi2 Kit for HJC IS Max Helmet
Chatterbox Bluetooth Adapters
Adapters use Bluetooth 2.0 (A2DP) technology to
wirelessly stream music from either your I-Pod
player with standard dock connector or a universal
device with 3.5mm headset jack (MP3 player,
I-Pod Adapter
satellite radio or GPS). It has an internal
rechargeable battery that lasts 6-8 hours. The
Bluetooth Dongle has a wireless range of up to
30 feet.
CBR-CBBTA ..................I-Pod Bluetooth Adapter
CBR-CBBTD ........Universal Bluetooth Adapter
Universal
Adapter
ChatterBox re-designed its award winning bike-to-bike wireless
Bluetooth intercom, the XBi2 to be incorporated into the HJC
IS-MAX BT helmet. The IS-MAX BT helmet has a built-in recess to
readily install the XBi2-H as the unit fits nice and flush into the
helmet for less wind resistance and ergonomic design. It has all the
same features as the XBi2 and will communicate with up to two
other XBi2-H or XBi2 units. Each kit
comes with everything you need for
1 helmet.
Kit Includes:
• XBi2-H Unit
• Dynamic Noise-Supression Microphone
• Hi-Fidelity Speakers
• Rechargeable Li-Poly Battery
• Mounting Hardware
• AC/DC Home Charger
CBR-CBXBI2HOKIT ....................XBi2 Kit for HJC IS Max Helmet
Visit our ChatterBox category online for the
latest products, installation instructions, videos and more!
46
www.racerpartswholesale.com
Policies
RPW MOTORCYCLE
ACCESSORIES
A Division of:
411 Dorman, Indianapolis, IN 46202
1-800-397-7815, info@racerpartswholesale.com, www.racerpartswholesale.com
Ordering:
By Phone: We are available Monday through Friday 8 a.m. to 5 p.m. Eastern Time to take your orders or answer questions.
Call toll free at 1-800-397-7815.
Online: Secure online ordering is available 24 hours a day at www.racerpartswholesale.com
Payment:
We accept Visa, MasterCard, American Express and Discover Cards. We also accept PayPal for orders placed online. For all
international orders (except Canada), we require payment via wire transfer.
Prices:
Please visit us online at www.racerpartswholesale.com or call 1-800-397-7815 for current pricing.
Shipping:
Most orders are shipped same-day via UPS Ground or US Priority Mail. We also offer UPS 3-Day Select, UPS 2nd Day Air or
UPS Next Day Air. Please visit us online at www.racerpartswholesale.com or call 1-800-397-7815 for current rates.
Guaranteed Lowest Prices:
If you find a lower price on a product that we carry, we’ll match it. This offer does not include closeouts, seconds or
discontinued items. The item must also be in stock and ready for shipment.
Return Policy:
All returns must be received at RPW within 45 days of the date of purchase and are subject to a 15% restocking fee unless you
were shipped the wrong product. Please call for a Return Merchandise Authorization Number (RMA #) prior to returning
the product.
Hours:
We are available Monday through Friday 8 a.m. to 5 p.m. Eastern Time. You may also visit us online 24 hours a day at
www.racerpartswholesale.com or e-mail us at info@racerpartswholesale.com
In the Indianapolis area? Come visit us! We have a will call area in our warehouse for customers who would like to pick-up product.
LIMITED WARRANTY
MOTOR RACING AND MOTORCYCLE RIDING ARE EXTREMELY HAZARDOUS. INJURY OR DEATH CAN AND DO OCCUR. THE PRODUCTS WE SELL HAVE NO
WARRANTY OR REPRESENTATIONS MADE ABOUT THEIR ABILITY TO PROTECT AGAINST INJURY OR DEATH. THE USER ASSUMES THAT RISK.
We’re racers and riders. Sometimes we go too fast. Racer Parts Wholesale and its agents and subcontractors are not responsible or liable for errors or omissions. Prices are subject to change without notice.
RACER PARTS WHOLESALE (referred to as the “warrantor”) will repair or replace products proven to have a defect in materials or workmanship with new or refurbished parts free of charge in the United States
within 30 days of the original purchase. We do not warranty any electrical components or assemblies. Manufacturer warranties, if any, will apply. Our warranty is extended only to original purchaser. A
purchase receipt or other proof of date of original purchase will be required before warranty service is rendered.
The warranty only covers failures due to defects in materials or workmanship which occurred during normal use and does not cover normal maintenance, including but not limited to normal wear and tear of the
product incurred during its intended use. It does not cover damage which occurs during shipment or failures which are caused by products not supplied by the warrantor or failures which may result from
accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set up adjustments, modifications or commercial use, or other business or rental use of the product or damage which
is attributable to acts of God.
Limits and Exclusions
There are no express warranties except as listed above. THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE APPLICABLE WARRANTY AND SET FORTH ABOVE. Some states do not allow the exclusion of limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from
state to state. If a problem with this product develops during or after warranty, you may contact the warrantor at the following address: 411 Dorman St., Indianapolis, IN 46202-3647, U.S.A. Repair work which
does not involve defective materials or workmanship is not covered by this warranty. Costs of such service, including shipping charges, are the responsibility of the purchaser.
Editorial, copyediting and layout by Jack Borsos and Amy Hall, Racer Parts Wholesale.
© 2011, Racer Parts Wholesale®. All rights reserved.
1-800-397-7815
47
47
#
PRE-SORTED
STANDARD
U.S. POSTAGE
PAID
RACER PARTS
WHOLESALE
411 Dorman St.,
Indianapolis, IN 46202-3647
RPW Motorcycle Accessories is
located in Indianapolis, IN and is a
division of Racer Parts Wholesale.
It is the Home of Marsee Products and
Helen Twowheels Super Packing System.
TM
Join over 100,000 satisfied customers!
We’ve been in business for
over 20 years and ship from
our own warehouse in
Indianapolis, IN.
We are knowledgeable
motorcyclists
and can answer your
questions, usually from
personal experience.
We support
hundreds
of events
locally,
regionally and
nationally.
We regularly
ship to
all fifty states,
as well as many
countries, with
most orders
shipping the
same day.
We offer
Guaranteed
Lowest Prices.
We have an easy-to-use website.
Browse by category or
enter the product part number into
the search engine to find exactly
what you are looking for.
1-800-397-7815 www.racerpartswholesale.com
www.helen2wheels.com www.marseeproducts.com