Alcatel Temporis IP150 User`s guide

Temporis IP150
Administrator and Provisioning Manual
Congratulations on your purchase of this Alcatel Temporis IP product. Before using this
Alcatel Temporis IP product, please read Important Safety Information on page 105 of
this manual. Please thoroughly read this manual for all the feature operations and
troubleshooting information necessary to install and operate your new product. You can
also visit our website at alcatel-business.com.
This manual provides instructions for using your Temporis IP150 telephone with software
version 0.64 or newer. See page 14 for instructions on checking the software version on
the deskset.
Parts checklist
Your telephone package contains the following items. Save your sales receipt and original
packaging in the event warranty service is necessary.






Quick Start Guide
Handset and handset cord
Phone base
Foot stand
Wall mount accessory
Ethernet cable
Temporis IP150 Administration and Provisioning Guide
ed 0.1
2/106
Table of contents
Parts checklist ................................................................................................... 2
Audience ........................................................................................................... 5
Related documents ............................................................................................. 5
About your phone............................................................................................... 5
Quick reference guide ......................................................................................... 6
Programmable Keys ........................................................................................... 7
Other possible programmable key settings ......................................................... 7
IP Addresses and Connectivity ............................................................................. 8
Deskset installation ...........................................................................................10
Idle Screen .......................................................................................................12
Status..............................................................................................................14
Viewing Line status ........................................................................................15
Using the Admin Settings menu ..........................................................................15
Network Setting ................................................................................................16
Line Menu ........................................................................................................17
Saving Your Settings .........................................................................................20
Status..............................................................................................................21
SIP Account Management ...................................................................................22
Dial Plan ..........................................................................................................24
Call Settings .....................................................................................................34
User Preferences ...............................................................................................36
Programmable Keys ..........................................................................................39
Memory Keys: Speed Dial ..................................................................................43
Signaling Settings .............................................................................................44
Ringer Settings .................................................................................................46
Basic Network Settings ......................................................................................47
Advanced Network Settings ................................................................................48
Local Directory ..................................................................................................51
Directory Import/Export .................................................................................51
Directory Import using configuration files..........................................................54
Black List .........................................................................................................55
Black List Import/Export .................................................................................55
Black List Import using configuration files .........................................................56
LDAP Directory .................................................................................................57
Broadsoft Directory ...........................................................................................60
Call History ......................................................................................................62
Reboot .............................................................................................................63
Time and Date ..................................................................................................63
Firmware Upgrade .............................................................................................67
Provisioning ......................................................................................................69
Security ...........................................................................................................74
Certificates .......................................................................................................76
System Logs .....................................................................................................78
Resynchronization—Configuration File Checking ....................................................80
The Provisioning Process ....................................................................................80
Phone Restart ...................................................................................................81
Configuration File Types .....................................................................................81
Data Files .........................................................................................................82
Configuration File Guide .....................................................................................82
Guidelines for the MAC-Specific Configuration File ..............................................82
Securing Configuration Files with AES Encryption ...............................................83
“sip_account” Module: SIP Account Settings .........................................................88
“network” Module: Network Settings ...................................................................91
“profile” Module: security settings .......................................................................92
“provisioning” Module: Provisioning Settings .........................................................93
Temporis IP150 Administration and Provisioning Guide
ed 0.1
3/106
“ringersetting” Module: distinctive ringing settings ................................................94
“time_date” Module: Time and Date Settings ........................................................94
“log” Module: Log Settings .................................................................................95
“remoteDir” Module: Remote Directory Settings ....................................................96
“web” Module: Web Settings ...............................................................................97
“user_pref” Module: User Preference Settings .......................................................98
“call_settings” Module: Call Settings ....................................................................99
“pfk” Module: Programmable Feature Key Settings .............................................. 100
“memory_key” Module: Speed Dial Settings ....................................................... 100
“file” Module: Imported File Settings ................................................................. 101
“tone” Module: Tone Definition Settings ............................................................. 102
Temporis IP150 Administration and Provisioning Guide
ed 0.1
4/106
Introduction
This administrator and provisioning guide contains detailed instructions for installing and
configuring your Temporis IP150 IP phone. Please read this guide before installing the
telephone.
Audience
This guide is written for installers and system administrators. It assumes that you are
familiar with networks and VoIP, both in theory and in practice. This guide also assumes
that you have ordered your IP PBX service and selected which PBX features you want to
implement. This guide does not reference specific IP PBX services except for features or
parameters that have been designed for a specific service. Please consult your service
provider for recommended switches, routers, and firewall and NAT traversal settings, and
so on.
As the Temporis IP150 deskset becomes certified for IP PBX services, we may make
available interop guides for those specific services. These will recommend second-party
devices and settings, along with deskset-specific configurations for optimal performance
with those services. Contact your distributor or installer for the latest updates.
Related documents
The Temporis IP150 Quick Start Guide contains a quick reference guide to the deskset
external features and brief instructions on connecting the deskset to a working IP PBX
system.
The Temporis IP150 User’s Guide contains a quick reference guide, connection
instructions, instructions for making and receiving calls, and a guide to all userconfigurable settings.
The documents are available from our website at alcatel-business.com.
About your phone
The Temporis IP150 phone is full-featured business phone designed to work with popular
SIP telephone (IP PBX) services. Once you have ordered and configured your SIP service,
the deskset enables you to make and receive calls as you would with any other business
phone. The phone provides calling features like hold, transfer, conferencing,
speakerphone, quick dial numbers and one-touch voicemail access.
There are two network ports, known as the LAN port and PC port, at the back of the
deskset. The LAN port allows the Temporis IP150 deskset to connect to the IP PBX via a
router. The PC port is for another device such as a personal computer to connect to the
Ethernet network through the deskset.
You can configure the deskset using the deskset’s own menus, a browser-based interface
called the WebUI, or an automatic provisioning process (see Provisioning Using
Configuration Files on page 80). The WebUI enables you to configure the deskset using a
PC that is connected to the same Local Area Network. The WebUI resides on the deskset,
and is updated with any firmware updates.
The Temporis IP150 deskset supports intercom and call transfers between system
extensions and can connect you and two other parties on the same conference call.
The telephone also has 10 dual-function programmable keys. Your system administrator
can program up to 18 quick-dial numbers for these keys. Some of those keys can also be
programmed to monitor other desksets in the system. The left hand side programmable
keys have two-color LEDs to indicate call activity. You can press the key for a monitored
extension to answer a call at your own deskset.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
5/106
This telephone supports caller ID with call waiting service. Caller ID services are
subscriber services available from many telephone service providers for a fee. The
telephone can store up to 200 Call Log entries.
The Temporis IP150 IP Phone features include:











2.5-inch backlit Liquid Crystal Display
Speakerphone, Headset, Hold and Mute
Up to 2 SIP Registrations
Up to 6 active SIP sessions
3-way conferencing
10 dual-function programmable keys
10 speed dial numbers (long press dial keypad)
Message Waiting alert LED
Dual 10/100 Mbps Ethernet ports
Power over Ethernet enabled
200-entry Call Log
Getting started
Quick reference guide
The controls you will need to use to configure the phone manually are described below.
Line
Press to change
dial-out account
(shown if second
sip account is
registered only)
Settings
Press to quickly access User
Settings menu
OK
Press to select a menu item
or save an entry or setting.
Hold key
In conversation, press to
place active call on hold.
In idle mode, press to
quickly access Network
Status menu
MENU
Press to enter the menu.
CANCEL
While in a menu, press to cancel
an operation and exit the menu.
In idle mode, long press to
reboot the phone
NAVIGATION KEY
While in menus, press
 or  to scroll
through the menu,
highlight items or
change settings. While
entering names or
numbers, press  or 
to move the cursor left
or right.
Navigation key also provides shortcuts to the following functions in idle mode:
Call history
Press to access your call
logs
Voicemail
Press to access Voicemail
menu
Temporis IP150 Administration and Provisioning Guide
Redial
Press to access redial list
Line
Press to switch dial out account
ed 0.1
6/106
The deskset external features that are relevant to installation and configuration are
described below.
Programmable keys
Can be programmed to perform various functions or access
various features.
For example:



Press to access a line to make a call
Press to dial a monitored extension or a
quick-dial number
Press to answer a ringing call on any line
or monitored extension
See also Programmable Keys on page 7.
Directory card
To write names on the directory card, pull out the directory card
from under the plastic cover.
RJ9 Corded headset input (on side)
Access F11 To F20
Press F5 to switch to the second possible value of a programmable key.
Note: This is the default setting. You can configure F5 to perform other
functions
Programmable Keys
The table below lists the default settings for the programmable keys. The key
assignments on your phone may be different. Some keys may be programmed as Quick
Dial keys, for example. To assign functions to programmable keys, see Programmable
Keys on page 39.
Key Number
Setting
1
Line 1*
2
Line 1
3
Quick dial
4
Quick dial
5
Access to F11-F20
6-14
Quick dial
15
Access to F11-F20
16-20
Quick dial
* You can assign more than one key to a line. For example, you can configure keys 1 and
2 to access Line 1, and keys 3 and 4 to access Line 2. Label the keys appropriately for
deskset users after configuration.
Other possible programmable key settings




Directory
Call History
Redial
Messages
Temporis IP150 Administration and Provisioning Guide
ed 0.1
7/106














Do not disturb
Quick Dial
BLF—Busy lamp field keys let you monitor activity at other phones. The key LED
indicates call status.
Call Forward Unconditional
Call Forward Busy
Call Forward No Answer
Call Forward All
Park Call—Dials the access code to park your current call. To program access
codes, see SIP Account Management on page 22.
Retrieve Parked Call—Dials the access code to retrieve a parked call.
In Call DTMF—Dials a string of numbers while you are on a call. For example,
pressing the key might dial a conference access code.
Call Back—Dials the number of the last missed call.
Intercom—If this feature is enabled, press the Intercom key to call one or a group
of phones. You can configure Intercom calls to be automatically answered. See
SIP Account Management on page 22.
Group Call Pickup—Dials the Group Call Pickup code, allowing you to answer a call
ringing at another extension.
Direct Call Pickup—Dials the Direct Call Pickup code, allowing you to answer a call
ringing at a specific extension. After pressing the button, you may need to enter
the extension number manually.
Network Requirements
A switched network topology is recommended for your LAN (using standard 10/100
Ethernet switches that carry traffic at a nominal rate of 100 Mbit/s).
The office LAN infrastructure should use Cat.-5 (or better) cable.
The LAN connections to the deskset(s) should all be wired. However, wireless
connections to other devices (such as laptops) in your office will not impede
performance.
All desksets must reside on a single subnet. A DHCP server is recommended and must be
on the same subnet as the desksets so that IP addresses can be auto-assigned. In most
cases, your network router will have a Dynamic Host Configuration Protocol (DHCP)
server that will automatically assign IP addresses to desksets. By default, the deskset
has DHCP enabled for automatic IP address assignment.
If no DHCP server is present, you can assign static IPs to desksets. If you do not have a
DHCP server or do not manually assign static IPs, you will not be able to access the
WebUI and/or enable automatic time updates from an NTP server.
Unless you want to manually set the system clock and manually upgrade deskset
software, an Internet connection to the LAN is required.
A DNS server is recommended to resolve the path to the Internet and to a server for
firmware and configuration updates.
If necessary, the system administrator can also download upgrade files and use the
WebUI to update the deskset firmware and/or configuration settings manually.
For users whose computers require a GigE Ethernet frame rate (a gigabit per second),
use separate Ethernet connections for the Deskset and the computer. The Ethernet
connection through a Deskset is limited to 100 Mbits/s.
IP Addresses and Connectivity
An IP address is an individual numeric identification assigned to devices on a computer
network. Valid IP addresses on the same subnet allow devices on the network to identify
Temporis IP150 Administration and Provisioning Guide
ed 0.1
8/106
each other and enable communication. To enable access to the WebUI, at least one
deskset needs a valid IP address on the same subnet as the computer you are using to
access the WebUI.
This IP address may be assigned from a Dynamic Host Configuration Protocol (DHCP)
server, or set statically to the same subnet, and will be separate from the self-assigned
169.254.xxx.xxx link-local address that the desksets use to communicate with each
other. When setting up the IP address on a deskset, this network IP address used for
WebUI connectivity is the only address you can change.
The network IP addresses can be assigned in two ways:
1. The deskset can request a network server to automatically assign an IP address. This
IP address is a dynamic assignment; the address is on lease from the server. The
lease is renewed as long as the device remains connected and there is no change to
the network. However, if the device is disconnected, or if there is a network or AC
power interruption, the lease may not be renewed (that is, the IP address expires)
and a new IP address may be assigned.
Note: Some DHCP servers have default settings that limit the number of network IP
addresses assigned to devices on the network. You should log in to your server to
confirm that the IP range is sufficient to accommodate at least one of the desksets that
you are adding. Consult the IT department if you need help checking the server.
2. You can manually assign a static IP address to a deskset. This IP address does not
change, even when there are network or AC power interruptions. Some installations
will require manual static IP assignment. You can assign a static IP address for a
deskset from the deskset IP Settings menu. See “Deskset IP Settings” on page 71.
Installation
This section assumes that your network infrastructure is established and that your hosted
IP PBX service has been ordered and configured for your location.
Install the phone close to a router or network switch. You can power the phone using
Power over Ethernet (PoE—Class 2) or the power adapter (not supplied). If you are not
using PoE, install the phone near a power outlet not controlled by a wall switch. The
phone can be placed on a flat surface or vertically mounted on the wall.
For customer service or product information, visit our website at alcatel-business.com.
Avoid placing the deskset too close to:







Communication devices such as television sets, DVD players, or other cordless
telephones.
Excessive heat sources.
Noise sources such as a window with traffic outside, motors, microwave ovens,
refrigerators, or fluorescent lighting.
Excessive dust sources such as a workshop or garage.
Excessive moisture.
Extremely low temperature.
Mechanical vibration or shock such as on top of a washing machine or work
bench.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
9/106
Figure 1: Temporis
IP150 Installation Example
Deskset installation
To install the phone:
1. If you plan to place the phone on a flat surface, you can use the phone with or
without the foot stand depending on the work angle you wish to have. To assemble
the stand line up the tabs on the stand (marked with triangles) with the slots on the
rear of the phone as shown in the picture
Plug the end of the coiled handset cord into the Handset jack on the side of the
phone.
2. Plug one end of the Ethernet cable into the Ethernet port at the back of the console,
and plug the other end of the cable into your network router or switch.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
10/106
NOTE: You may need to use a network switch connected to your router if your router
does not have sufficient ports for the number of phones you want to install. If you use
a network switch, connect the phone to the switch instead of the router in the
previous step.
3. If the deskset is not using power from a PoE-capable network router or switch:
a. Connect the power adapter to the deskset power jack.
b. Plug the power adapter into an electrical outlet not controlled by a wall
switch.
IMPORTANT INFORMATION
1. Use only original power adapters. Contact your distributor to order.
2. The power adapter is intended to be correctly oriented in a vertical or floor mount
position. The prongs are not designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
If there is a networked computer and no extra Ethernet wall ports near the phone, then
the phone and PC can share the same network connection.
To share a network connection with a PC:
1. Plug a Cat.-5 Ethernet cable into the PC port on the phone.
2. Plug the other end of the Cat.-5 Ethernet cable into your computer’s network port.


If a GigE network is being used, a computer connected through the phone will be
limited to 100 Mbits/s. If you require a GigE Ethernet rate, use separate Ethernet
connections for the phone and the computer.
If a PC is connected to your network through a phone, any phone resets and
power or network interruptions will disrupt the PC’s connection to the network.
To mount the phone on the wall:
1. Put the corded handset aside. Use a coin to rotate the handset tab 180 degrees. The
protruding edge holds the corded handset when the phone is mounted on the wall.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
11/106
2. Assemble wall mount accessories as depicted
3. Connect the network cable(s) and power adapter (if required).
4. Hang the phone on the wall using the upper holes in the wallmount accessory.
Verifying the installation
Idle Screen
The idle screen appears after the phone is connected and configured for your SIP PBX
service. The idle screen indicates that you have no active or held calls.
Figure 2: Idle screen
Note “Line” softkey will be shown only if you have configured and registered more than
one sip account.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
12/106
Configuring the Phone
You can configure the phone using one of three methods:



From the phone itself, using the menus. The phone menus are best suited to
configuring a few settings, perhaps after the initial setup has been done. For
administrators, the settings available on the phone menus are limited to network
settings. See Using the Admin Settings menu on page 15. Most of the settings
accessible on the phone itself are most useful for end users. Through the menu,
they can customize the screen appearance, sounds, and manage calls. For more
information, see the Temporis IP150 User Guide.
The Web User Interface, or WebUI, which you access using your Internet browser.
See Using the WebUI on page 19. The browser-based interface is easy to navigate
and best-suited to configuring a large variety of phone settings. The WebUI has
every setting required for configuring a single phone. You can enter service
provider account settings on the WebUI, configure the programmable keys, and
set up provisioning, which will allow you to automatically and remotely update the
phone after initial configuration.
The configuration file. Working with configuration files is the best way to
configuring multiple phones. There are several methods available to enable the
phone to find the configuration file. For example, you can enable the phone, when
it starts up or reboots, to check for the presence of a configuration file on a
provisioning server. If the configuration file is new or has been modified in any
way, the phone automatically downloads the file and applies the new settings. For
more information, see Provisioning Using Configuration Files on page 80.
Using the Phone Menu
The phone menu has four main sub-menus:




Features—manage calls, view and add directory entries, view call history, access
messages, and use the speed dial menu.
Status—view the deskset network status, account registration status, and
product information.
User Settings—allows the user to set the language for the display, configure the
appearance of the display, customize the audio settings, and register a DECT
headset.
Admin Settings—configure network settings (enter static IP addresses, for
example) and line settings.
This guide contains instructions for using the Admin Settings menu and for accessing the
Status menu. See the Temporis IP150 User Guide for more information about Features
and User Settings.
To use the phone menu:
1. When the phone is idle, press MENU.
The main menu appears.
2. Press  or  to highlight the desired sub-menu, and then press OK.



You can also press a corresponding dial pad key to select a numbered menu item.
Press 2 for the Status menu, for example.
Press OK or an appropriate soft key to save changes.
Press
to cancel an operation, exit the menu display or return to the idle
screen.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
13/106
Status
Use the status menu to verify network settings and begin troubleshooting if network
problems or account registration issues affect phone operation.
You can also find the software version of the phone on the Product Info screen, available
from the Status menu.
To view the Status menu:
1. When the phone is idle, press MENU.
2. On the Main menu, press  or  to highlight Status, then press OK. The Status
menu appears.
3. On the Status menu, press  or  to highlight the desired menu, then press
SELECT.
The available status menus are:
Menu
1. Network
2. Line
3. Product Info
Information listed








IP address
DHCP status (Enabled/Disabled)
Subnet Mask IP address
Gateway IP address
DNS server 1 IP address
DNS server 2 IP address
SNTP server URL
MAC address
Lines and registration status. On the Line menu, highlight
and select the desired line to view detailed line status
information:












Line status (Registered/Not registered)
Line display name
Line User ID
Server IP address
Server Port number
Proxy server IP address
Proxy server port number
Model number
Serial number
MAC address
Software version
Hardware version
Temporis IP150 Administration and Provisioning Guide
ed 0.1
14/106
Note
To view Network status you can also use the following shortcut. In idle mode, press
key.
Viewing Line status
When you select Line from the Status menu, the Line menu appears, listing the
available lines along with icons indicating each line’s current registration status.
Icon
Description
Line registered
Line not registered
Line disabled
To view complete status information for a line:
1. On the Line menu, press  or  to highlight the desired line, then press SELECT.
The full line status screen appears.
Using the Admin Settings menu
To access the Admin Settings menu:
1. When the phone is idle, press MENU. The Main menu appears.
2. Press  or  to highlight Admin Settings, then press SELECT.
-orPress 4 (Admin Settings) on the dial pad.
3. Use the dial pad to enter the admin password, the press SELECT. The default
password is admin.
The Admin Settings are:
Temporis IP150 Administration and Provisioning Guide
ed 0.1
15/106
Setting
Options
1. Network setting
1. DHCP (Enable, Disable)
2. Set static IP
3. VLAN
4. Others
2. Line
1. LINE 1
2. LINE 2 (if available)
3. Provisioning
Configure provisioning server url, user and
password
4. Reset to default
Press SELECT to reset the phone to factory default
settings.
5. Restart phone
Press SELECT to restart the phone.
Network Setting
Use the Network setting menu to configure network-related settings for the phone.
Note: After you press Save for any of the network settings, the phone restarts.
To use the Network setting menu:
1. From the Admin Settings menu, press  or  to highlight Network setting, then
press SELECT.
The Network setting menu appears.
2. Press  or  to highlight the desired option, then press SELECT:



DHCP
Set static IP
Others (DNS and NTP servers).
To enable or disable DHCP:
1. From the Network setting menu, press  or  to highlight DHCP, then press SELECT.
2. Press  or  to select Enabled or Disabled, then press Save.
DHCP is enabled by default, which means the deskset will get its IP address from the
network. When DHCP is disabled, you must enter a static IP address for the deskset.
Note: You must be familiar with TCP/IP principles and protocols to configure static IP
settings.
To set static IP for the deskset:
1. From the Network setting menu, press  or  to highlight Set static IP, then press
SELECT.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
16/106
If DHCP is disabled, the Set static IP menu appears. If DHCP is enabled, an error
message appears briefly before returning you to the Network setting menu.
2. On the Set static IP menu, enter the static IP address. Use the dial pad and the Add
dot soft key to enter characters. Press  or  to advance to the next character.
3. Press  and enter the Subnet Mask. Use the dial pad and the Add dot soft key to
enter characters. Press  or  to advance to the next character.
4. Press  and enter the Gateway. Use the dial pad and the Add dot soft key to enter
characters. Press  or  to advance to the next character.
5. Press Save.
To set other settings (DNS and NTP):
1. From the Network setting menu, press  or  to highlight Others, then press
SELECT. The Others menu appears.
2. If DHCP is disabled or you don’t wish to use the DHCP-assigned DNS server (or one
specified by your service provider), enter the IP address for the primary DNS server.
Use the dial pad and the Add dot soft key to enter characters. Press  or  to
advance to the next character.
3. Press  and enter the IP address for the secondary DNS server. The deskset uses this
server if the primary server does not respond.
4. Press  and enter the IP address for the NTP server. If the deskset does not use an
NTP server, you must manually enter the time and date settings.
5. Press Save.
Line Menu
Use the Line menu to configure line-specific settings for the phone.
On the Line menu, you can configure:











Line status (Registered/Not registered)
Line display name
Line User ID
Auth ID
Password
Server IP address
Server Port number
Proxy server IP address
Proxy server port number
Line registration
Auto/manual answer page
To use the Line setting menu:
1. From the Admin Settings menu, press  to highlight Line, then press SELECT.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
17/106
The Line menu appears.
2. Highlight the desired line, if necessary, by pressing , and then press SELECT.
The full configuration menu for that line appears. You can configure:










Display name
User ID
Authorization ID
Authorization Password
Server IP
Server port
Proxy server IP
Proxy server port
Register (On or Off)
Answer page (Manual or Auto)
For more information about these settings, see SIP Account Management on page 22.
3. Edit the Line settings using the dial pad and the soft keys available for each setting:




Backspc—deletes a character
123—enables you to enter numbers, lower case letters, or upper case letters with
the dial pad. Does not appear when the setting accepts numbers only.
Save—prompts you to reboot the phone and apply the new settings
Edit—enables you to edit the setting (appears for the Password setting)
Press  or  to advance to the next character.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
18/106
Using the WebUI
The Web User Interface (WebUI) resides on your phone. You can access it using an
Internet browser. After you log in to the WebUI, you can configure the phone on the
following pages:




System
o SIP Account Management
o Call settings
o User Preferences
o Programmable Keys
o Memory Keys
o Signaling Settings
o Ringer Settings
Network
o Basic Network Settings
o Advanced Network Settings
Contacts
o Local Directory
o Blacklist
o LDAP
o Broadsoft
o Call History
Servicing
o Reboot
o Time and Date
o Firmware Upgrade
o Provisioning
o Security
o Certificates
o System Logs
The WebUI also has a Status page, where you can view network status and general
information about your phone. The information on this page matches the Status menu on
the phone.
To access the WebUI:
1. Ensure that your computer is connected to the same network as your deskset. Your
computer may already be connected to the network through the PC port on the back
of your deskset.
2. Find the IP address of your phone:
a. When the phone is idle, press MENU.
b. Press  to highlight Status, and then press SELECT.
c. With Network highlighted, press SELECT.
The Network status screen appears.
Note: Instead of steps a, b, c you can use the shortcut to Network status
(in idle mode press
)
d. On the Network status screen, note the IP Address.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
19/106
3. On your computer, open an Internet browser. (Depending on your browser, some of
the pages presented here may look different and have different controls.)
4. Type the phone IP address in the browser address bar and press ENTER on your
computer keyboard.
5. A login box appears. Under Username, enter admin. For the password, enter the
default password, admin. You can change the password later on the Servicing >
Security page.
6. On the login box, click OK.
The WebUI appears.
Click topics from the navigation bar along the top of the WebUI, and then click links to
individual pages along the left. You view and change settings in two different types of
fields: drop-down lists and entry fields into which you type information. For your security,
the WebUI times out after 10 minutes, so if it is idle for that time, you must log in again.
The remaining procedures in this section assume that you are already logged into the
WebUI.
NOTE: The settings tables in this section contain settings that appear in the WebUI and
their equivalent tags in the configuration file template. Settings only available on the
configuration files are also described. You can use the configuration file template to
create custom configuration files. Configuration files can be hosted on a provisioning
server and used for automatically configuring phones. For more information, see
Provisioning Using Configuration Files on page 80.
Saving Your Settings
Each WebUI settings page has a Save button. Click Save to save any changes you have
made on the page. During a configuration session, click Save before you move on to the
next WebUI page.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
20/106
Status
The status page is equivalent to the Status menu on the phone UI. The information page
shows:



General information about your phone, including model, MAC address, and
software version
Line Status information about your and SIP account registration
Network regarding your phone’s network address and network connection
Temporis IP150 Administration and Provisioning Guide
ed 0.1
21/106
SIP Account Management
On the SIP Account Management pages, you can enter the account settings for each line
you have ordered from your service provider. There are two Account settings pages (one
for each available line) with identical settings on each page.
General Account Settings
Setting
Description
Range
Default
Enable Account
Enable or disable the SIP
account. Select to enable.
0: Disable
0
Enter the name that will
appear on the phone LCD. The
display name is also the text
portion of the caller ID that is
displayed for outgoing calls.
string
blank
Enter the User identifier
supplied by your service
provider. The User ID, also
known as the Account ID, is
usually the company's main
number and is used as part of
the caller ID displayed for
outgoing calls. This field will
only accept digits.
string
blank
Enter the authentication name
(or authentication ID) supplied
by your service provider. This
is used for authentication with
the service provider and in
most cases is the same as the
User ID.
string
blank
sip_account.x.sip_account_enable
Display Name
sip_account.x.display_name
User identifier
sip_account.x.user_id
Authentication name
sip_account.x.authentication_name
Temporis IP150 Administration and Provisioning Guide
ed 0.1
1: Enable
22/106
Authentication password
sip_account.x.authentication_password
Dial Plan
sip_account.x.dial_plan
Inter Digit Timeout (secs)
sip_account.x.inter_digit_timeout
Maximum Number of Calls
sip_account.x.maximum_call_number
Page Auto Answer
sip_account.x.auto_answer_enable
Feature Synchronization
sip_account.x.feature_sync_enable
Line Type
sip_account.x.share_line_enable
Barge-in
sip_account.x.barge_in_enable
Enter the account
authentication password, as
supplied by your service
provider.
string
blank
Enter the dial plan, with dialing
strings separated by a |
symbol. See Dial Plan on page
24.
string
X+P
Sets the timeout before the
dialed number is sent to the
SIP server.
1–10
seconds
3 seconds
Select the maximum number
of simultaneous voice calls to
which you have subscribed
from your service provider.
The maximum value is 6.
1-6
3
Enables the deskset to
automatically answer when a
page is received. This is
usually the desired behavior
for paging.
0: Disable
1
Enables the phone to
synchronize with Broadworks
Application Server. Changes to
features such as DND, Call
Forward All, Call Forward No
Answer, and Call Forward Busy
on the server side will also
update the settings on the
phone menu and WebUI.
Similarly, changes using the
phone or WebUI will update
the settings on the server.
0: Disable
Select the line type. A private
line will be accessible only at
the deskset you are
configuring. For more
information about using shared
lines, see the Temporis IP150
User’s Guide.
0: Private
Enables subscribers to shared
lines to “barge in” on active
calls on other shared lines.
0: Disable
Temporis IP150 Administration and Provisioning Guide
ed 0.1
1: Enable
0
1: Enable
0
1: Shared
1: Enable
23/106
0
DTMF method
sip_account.x.dtmf_transport_method
Unregister after reboot
sip_account.x.unregister_after_reboot_enable
Select the default DTMF
transmission method. You may
need to adjust this if call
quality problems are triggering
unwanted DTMF tones or you
have problems sending DTMF
tones in general.
Auto,
Event,
Inband,
SIP INFO
Auto
Enables the phone to
unregister the account(s) after
rebooting—before the
account(s) register again as
the phone starts up. If other
phones that share the same
account(s) unregister
unexpectedly in tandem with
the rebooting deskset, disable
this setting.
0: Disable
0
1: Enable
Dial Plan
The dial plan consists of a series of dialing rules, or strings, that determine whether what
the user has dialed is valid and when the phone should dial the number.
Dialing rules must consist of the elements defined in the table below.
Element
x
[0-9]
x+
Description
Any dial pad key from 0 to 9, including # and *.
Any two numbers separated by a hyphen, where the second number is
greater than the first. All numbers within the range or valid, excluding #
and *.
An unlimited series of digits.
,
This represents the playing of a secondary dial tone (<SIP_2ND_TONE>) after
the user enters the digit(s) specified or dials an external call prefix
(<EXT_CALL_PREFIX>) before the comma. For instance, “9,xxxxxxx” means
the secondary dial tone is played after the user dials 9 until any new digit
is entered. “9,3xxxxxx” means only when the digit 3 is hit would the
<SIP_2ND_TONE> stop playing.
PX
This represents a pause of a defined time; X is the pause duration in
seconds. For instance, “P3” would represent pause duration of 3 seconds.
(0:9)
This is a substitution rule where the first number is replaced by the
second. For example, “(4:723)xxxx” would replace “46789” with
“723-6789”. If the substituted number (the first number) is empty, the
second number is added to the number dialed. For example, in
“(:1)xxxxxxxxxx”, the digit 1 is appended to any 10-digit number dialed.
|
This separator is used to indicate the start of a new pattern. Can be used
to add multiple dialing rules to one pattern edit box.
A sample dial plan appears below.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
24/106
SIP Server Settings
Setting
Description
Range
Default
Server address
Enter the IP address or fqdn for
the SIP server.
IP
address
or fqdn
blank
Enter the port number that the SIP
server will use.
0-65535
5060
sip_account.x.primary_sip_server_address
Server port
sip_account.x.primary_sip_server_port
Registration Settings
Setting
Description
Range
Default
Server address
Enter the IP address or
fqdn for the registrar
server.
IP
address
or fqdn
blank
Enter the port number
that the registrar server
will use.
0-65535
5060
Enter the desired
registration expiry time in
0–65535
3600
sip_account.x.primary_registration_server_address
Server port
sip_account.x.primary_registration_server_port
Expiration
Temporis IP150 Administration and Provisioning Guide
ed 0.1
25/106
sip_account.x.primary_registration_expires
Registration Freq (secs)
sip_account.x.registration_retry_time
seconds. This is usually
3600 seconds (1 hour).
Enter the desired
registration retry time in
seconds.
1–1800
10
Outbound Proxy Settings
Setting
Description
Range
Default
Server address
Enter the IP address or
fqdn for the outbound
proxy server.
IP
address
or fqdn
blank
Enter the port number
that the outbound proxy
server will use. This is
usually 5060.
0–65535
5060
Setting
Description
Range
Default
Server address
Enter the IP address or
fqdn for the backup
outbound proxy server.
IP
address
or fqdn
blank
Enter the port number
that the backup
outbound proxy server
will use. This is usually
5060.
0–65535
5060
sip_account.x.primary_outbound_proxy_server_address
Server port
sip_account.x.primary_outbound_proxy_server_port
Backup Outbound Proxy Settings
sip_account.x.backup_outbound_proxy_server_address
Server port
sip_account.x.backup_outbound_proxy_server_port
Temporis IP150 Administration and Provisioning Guide
ed 0.1
26/106
Audio Settings
Setting
Description
Range
Default
Ringer Tone
Sets the ringer tone for
incoming calls on the
account.
Tone 1–10
Tone 1
Select the codec to be used
first during a call.
G.711a,
G.711u, G.729,
G.726, G.722
G.711u
Select the codec to be used
second during a call in the
event near-end and far-end
cannot negotiate the first
codec.
None, G.711a,
G.711u, G.729,
G.726, G.722
G.711a
Select the codec to be used
third during a call if previous
codecs fail.
None, G.711a,
G.711u, G.729,
G.726, G.722
G.729
Select the codec to be used
fourth during a call if previous
codecs fail.
None, G.711a,
G.711u, G.729,
G.726, G.722
G.726
Select the codec to be used
fifth during a call if previous
codecs fail.
None, G.711a,
G.711u, G.729,
G.726, G.722
G.722
Select to enable secure RTP
for voice packets.
0: disable
0
user_pref.line.x.ringer
Codec Priority 1
sip_account.x.codec_priority.1
Codec priority 2
sip_account.x.codec_priority.2
Codec priority 3
sip_account.x.codec_priority.3
Codec priority 4
sip_account.x.codec_priority.4
Codec priority 5
sip_account.x.codec_priority.5
Enable voice encryption (SRTP)
sip_account.x.voice_encryption_enable
1: enable
Quality of Service
Setting
Description
Range
Default
DSCP (voice)
Enter the Differentiated Services Code
Point (DSCP) value from the Quality of
Service setting on your router or switch.
A 6-bit value is supported.
0-63
46
Enter the Differentiated Services Code
Point (DSCP) value from the Quality of
Service setting on your router or switch.
A 6-bit value is supported.
0-63
26
sip_account.x.voice_dscp
DSCP (signalling)
sip_account.x.signaling_dscp
Signaling Settings
Setting
Description
Local SIP port
Range
Default
0–65535
5060
sip_account.x.local_sip_port
Temporis IP150 Administration and Provisioning Guide
ed 0.1
27/106
Transport
Select the SIP transport protocol.
Tls, tcp, udp
udp
TCP (Transmission Control Protocol) is
the most reliable protocol and includes
error checking and delivery validation.
UDP (User Datagram Protocol) is
generally faster but SIP data may be
subject to network congestion.
sip_account.x.transport_mode
TLS (Transport Layer Security)
transport requires security certificates to
establish a secure connection between
phone and server. You must upload one
or more trusted certificates and a server
certificate to the phone. See Servicing
> Certificates on the WebUI and
consult your service provider.
Feature Access Codes Settings
If your IP PBX service provider uses feature access codes, then enter the applicable
codes here. You can assign many of these features to programmable keys, which enables
end users to press the keys to dial out the codes you enter here.
Setting
Description
PFK available?
Paging
Enter the paging access
code.
Yes
Enter the call park access
Yes
sip_account.x.access_code_page
Call Park
Temporis IP150 Administration and Provisioning Guide
ed 0.1
28/106
sip_account.x.access_code_park_call
Parked Call Retrieval
sip_account.x.access_code_retrieve_parked_call
Voicemail Retrieval
sip_account.x.access_code_retrieve_voicemail
code.
Enter the call park
retrieval access code.
Yes
Enter the voicemail
retrieval access code. The
code is dialed when the
user selects a line from
the Features > Message
menu.
Yes
DND ON
Yes
sip_account.x.access_code_dnd_on
DND OFF
Yes
sip_account.x.access_code_dnd_off
Call Forward All ON
Yes
sip_account.x.access_code_cfa_on
Call Forward All OFF
Yes
sip_account.x.access_code_cfa_off
Call Forward No Answer ON
Yes
sip_account.x.access_code_cfna_on
Call Forward No Answer OFF
Yes
sip_account.x.access_code_cfna_off
Call Forward Busy ON
Yes
sip_account.x.access_code_cfb_on
Call Forward Busy OFF
Yes
sip_account.x.access_code_cfb_off
Anonymous Call Block ON
No
sip_account.x.access_code_anonymous_call_block_on
Anonymous Call Block OFF
No
sip_account.x.access_code_anonymous_call_block_off
Outgoing Call Anonymous ON
No
sip_account.x.access_code_outgoing_call_anonymous_on
Outgoing Call Anonymous OFF
No
sip_account.x.access_code_outgoing_call_anonymous_off
Call Waiting ON
Temporis IP150 Administration and Provisioning Guide
No
ed 0.1
29/106
sip_account.x.access_code_call_waiting_on
Call Waiting OFF
No
sip_account.x.access_code_call_waiting_off
Group Call Pick Up
sip_account.x.access_code_group_call_pickup
Direct Call Pick Up
sip_account.x.access_code_direct_call_pickup
Enter the Group Call
Pickup code. Dialing the
code enables the user to
answer a call ringing at
another deskset that is
part of the same group.
Yes
Enter the Group Call
Pickup code. Dialing the
code enables the user to
answer a call ringing at
another deskset.
Yes
Busy Lamp Field Settings
Temporis IP150 Administration and Provisioning Guide
ed 0.1
30/106
Setting
Description
Range
Default
List URI
Used for list-based BLF
Sip URI
blank
1565535
3600
Enter the remote pickup code for the
BLF list, as supplied by your service
provider.
string
blank
Setting
Description
Range
Default
Enable MWI Subscription
When enabled, the line subscribes to
the “message summary” event
package. The line may use the User ID
and authentication or the service
provider’s “Mailbox ID”. When
disabled, the line receives any
“message summary” notifications if
the message header contains the
account User ID. Consult your service
provider.
0:
disable
0
Enter desired “message summary”
subscription duration in seconds.
1565535
3600
SIP URI
blank
sip_account.x.blf_list_uri
BLF Subscription Expiration
Enter the BLF list URI, as supplied by
or set up with your service provider.
For example, blf-list1@sipservice.com.
This list contains a list of extensions
that are eligible for BLF monitoring.
You can assign keys for BLF
monitoring on the Programmable Keys
page. See page 39.
Enter desired BLF subscription
duration in seconds.
It is normally 3600 sec
sip_account.x.blf_subscription_expires
Remote Pickup Code
sip_account.x.blf_remote_pickup_code
Voicemail Settings
sip_account.x.mwi_enable
MWI Subscription Expiration
1:
enable
It is normally 3600 sec
sip_account.x.mwi_subscription_expires
Mailbox ID
Enter the uri the phone should use to
subscribe to “message summary”
notifications. If empty, Voicemail
retrieval access code will be used for
this purpose.
sip_account.x.mwi_uri
Temporis IP150 Administration and Provisioning Guide
ed 0.1
31/106
Ignore unsolicited MWI
When enabled, only notifications
pertaining to the active “message
summary” subscription will be
considered as valid to compute MWI
status.
0:
disable
Enables or disables the stutter dial
tone for that line (indicating
message(s) waiting) when the phone
goes off hook.
0:
disable
Setting
Description
Range
Default
Enable STUN
Enables or disables STUN
mechanism to allow sip
communications in
NATted environments.
0:
disable
0
Enter the stun server
address or fqdn
IP
address
or fqdn
blank
Enter the port the STUN
server is using. Normally
it will be 3478
0-65535
3478
Enables or disables UDP
keepalive on this
account—this mechanisms
periodically sends a UDP
packet on the sip port to
keep this port open on the
NAT device.
0:
disable
0
Enter the time in seconds
between UDP keepalive
messages.
0-65535
sip_account.x.mwi_ignore_unsolicited
Enable Stutter Dial Tone
sip_account.x.stutter_dial_tone_enable
0
1:
enable
1
1:
enable
NAT Traversal Settings
sip_account.x.nat_traversal_stun_enable
Server address
sip_account.x.nat_traversal_stun_server_address
Server port
sip_account.x.nat_traversal_stun_server_port
Enable UDP Keep-Alive
sip_account.x.nat_traversal_udp_keep_alive_enable
Keep-alive interval (secs)
sip_account.x.nat_traversal_udp_keep_alive_interval
1:
enable
1:
enable
30
Music On Hold Settings
Setting
Description
Range
Default
Enable MoH
Enables or disables a local tone
played when the phone is put on
hold by the remote party.
0: disable
1
sip_account.x.music_on_hold_enable
1: enable
The interval between tones can be
controlled with “Call Hold Reminder
tone”, in User Preferences section
Temporis IP150 Administration and Provisioning Guide
ed 0.1
32/106
Network Conference Settings
Setting
Description
Range
Default
Enable Network Conference
Enables or disables conferences
being controlled and mixed by a
conference server, also called
Network Bridge.
0: disable
0
sip_account.x.network_conference_enable
1: enable
When disabled, the phone will
create the conference locally,
without the need for a conference
server.
Network Bridge URI
Enter the URI to direct the phone
to the network bridge for each
line.
SIP URI
blank
Setting
Description
Range
Default
Enable Session Timer
Enables or disables sip “timer”
mechanism, which allows session
monitoring
0: disable
0
Enter the value of the “Min S-E”
header, i.e., the minimum
interval the phone is willing to
use for monitoring the session
90-65535
90
Enter the maximum interval the
phone is willing to use for
monitoring the session.
90-65535
1800
sip_account.x.network_bridge_uri
Session Timer
sip_account.x.sip_session_timer_enable
Minimum value (secs)
sip_account.x.sip_session_timer_min
Maximum value (secs)
sip_account.x.sip_session_timer_max
Temporis IP150 Administration and Provisioning Guide
ed 0.1
1: enable
33/106
Call Settings
You can configure call settings for each line. Call Settings include Do Not Disturb and Call
Forward settings.
When you have finished changing settings on this page, click Save to save them.
General Call Settings
Setting
Description
Range
Default
Active block anonymous
Blocks calls with no caller ID.
0: disable
0
1: enable
call_settings.line.x.block_anonymous_enable
Enable outgoing anonymous call
call_settings.line.x.outgoing_anonymous_enable
When enabled, the phone
will ask the server to hide its
identity in outgoing calls
0: disable
0
1: enable
Do Not Disturb Settings
Setting
Description
Range
Default
Enable Do Not Disturb
Turns Do Not Disturb on or off.
0: disable
0
1: enable
call_settings.line.x.dnd_enable
Incoming Calls
call_settings.line.x.dnd_incoming_calls
Selects whether the phone displays
incoming call information while Do
Not Disturb is on.
show,
reject
The phone will not ring in either
mode.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
34/106
reject
Call Forward Settings
Setting
Description
Range
Default
Enable Call Forward Always
Enables or disables call
forwarding for all calls on that
line. Select to enable.
0: disable
0
Enter a number to which all
calls will be forwarded.
string
blank
Enables or disables call
forwarding for calls when you
are on another call on that line.
0: disable
0
Enter a number to which calls
will be forwarded when the line
is busy.
string
blank
Enables or disables call
forwarding for unanswered
calls on that line.
0: disable
0
Enter a number to which
unanswered calls will be
forwarded.
string
blank
Select the number of rings
before unanswered calls are
forwarded.
1-10
(rings)
6
Enables or disables missed call
indication on the phone screen
0: disable
1
call_settings.line.x.call_fwd_always_enable
Target Number
call_settings.line.x.call_fwd_always_target
Enable Call Forward Busy
call_settings.line.x.call_fwd_busy_enable
Target Number
call_settings.line.x.call_fwd_busy_target
Enable Call Forward No Answer
call_settings.line.x.cfna_enable
Target Number
call_settings.line.x.cfna_target
Delay
call_settings.line.x.cfna_delay
Enable Missed calls alert
call_settings.missed_call_alert_enable
Temporis IP150 Administration and Provisioning Guide
ed 0.1
1: enable
1: enable
1: enable
1: enable
35/106
User Preferences
On the User Preferences menu, you can configure some basic settings for the phone and
set how the phone responds to calls.
After changing any settings on this page, click Save to save them.
General User Settings
Setting
Description
Range
Default
WebUI Language
Sets the language that appears on the
WebUI.
en: English
en
user_pref.language
fr: French
es: Spanish
de: German
it: Italian
pt:
Portuguese
nl: Dutch
Phone Language
Sets the language that appears on the phone.
en: English
fr: French
user_pref.language
es: Spanish
de: German
it: Italian
pt:
Portuguese
nl: Dutch
Temporis IP150 Administration and Provisioning Guide
ed 0.1
36/106
en
Backlight Timer (secs.)
user_pref.backlight_timeout
Ringer Volume
user_pref.ringer_volume
Default Audio Mode
user_pref.audio_mode
Sets how long the screen backlight stays on
after the last button press.
10-60
(seconds)
30
Sets the ringer volume for incoming calls. You
can also use the VOLUME  or  keys on
the deskset.
0–9
5
Sets how calls are answered when you press
a line key or Answer.
speaker,
headset
speaker
(0 means
off)
Call Hold Reminder Settings
Setting
Description
Range
Default
Enable Call Hold Reminder
Tone
Enables or disables the call hold
reminder tone. This tone periodically
warns the user that he has previously
put a call on hold.
0: disable
1
user_pref.hold_reminder.enable
1: enable
Select to enable.
Tone Interval (secs)
Sets the interval for the call hold
reminder tone.
10–300
(seconds)
30
user_pref.hold_reminder.interval
Call Waiting Settings
Setting
Description
Range
Default
Enable Call Waiting Tone
Enables or disables the call waiting
tone. Select to enable.
0: disable
1
Sets the interval in seconds for the
call waiting tone.
10–60
(seconds)
30
Accepts or rejects incoming call
notification screen while the user is
already on a call.
enable,
reject
enable
1–7
4
user_pref.call_waiting.tone_enable
Call Waiting Tone Interval (secs.)
user_pref.call_waiting.tone_interval
Call Waiting on/off
user_pref.call_waiting.mode
1: enable
Only one of the two radio buttons
can be selected.
If set to “enable”, the waiting call is
presented to the user
If set to “reject”, the phone will send
an error response to the server
LCD Contrast Level
Sets the contrast for the LCD
Temporis IP150 Administration and Provisioning Guide
ed 0.1
37/106
user_pref.lcd_constrast
Backlight level (non idle)
user_pref.backlight
Backlight level (idle)
user_pref.idle_backlight
Live dial to idle timeout (secs.)
user_pref.absent_timeout
Handsfree volume
user_pref.speaker_volume
Headset volume
display.
Enables or disables the backlight for
non idle mode, i.e, during user
operation.
0: disable
1
Enables or disables the backlight in
idle state.
0: disable
Sets the timeout (in seconds) after
which live dial interface will return to
idle if there are no more dialled
digits.
10–60
(seconds)
30
Sets speaker volume for handsfree
calls.
1-10
5
Sets headset volume.
1-10
5
Sets handset volume.
10–60
(seconds)
30
Enables or disables the beep played
when a key is pressed.
0: disable
1
1: enable
0
1: enable
user_pref.headset_volume
Corded Handset volume
user_pref.handset_volume
Enable Key beep
user_pref.key_beep_enable
Temporis IP150 Administration and Provisioning Guide
ed 0.1
1: enable
38/106
Programmable Keys
Temporis IP150 has 10 dual-function programmable keys. The five keys on the left have
a dual-color backlight (orange and green)
Keys are numbered top to bottom, and left to right.
You can assign up to 20 functions to the programmable keys on the Programmable Keys
page.
You can select one option for each key. Keys can have identical functions. For example,
you can assign several keys “Line” keys for Line 1 to enable users to manage multiple
calls on Line 1. You can also assign multiple Quick Dial keys.
Depending on the feature, you may need to select also the line (account) for which it is
applicable and some value.
Type
Description
Parameters
Line
Configures the key for accessing a line (or SIP
account). Users can make or answer calls by
pressing these keys. The key LED will change
according to call activity.
pfk.x.feature = line
pfk.x.line_number = 1
or 2
(x: 1-20, function key
number)
After selecting Line in the Type column, select the
Line number in the Line column.
Directory
Call History
Configures the key to access the Directory menu.
Users can then press the key to view the Directory
menu.
pfk.x.feature = dir
Configures the key to access the Call History list.
Users can then press the key to view the Call History
pfk.x.feature = call
log
Temporis IP150 Administration and Provisioning Guide
ed 0.1
(x: 1-20, function key
number)
(x: 1-20, function key
number)
39/106
list.
Redial
Configures the key to access the Redial list. Users
can then press the key to view the Redial list.
pfk.x.feature = redial
Messages
Configures the key to access the Message menu.
Users can then press the key to view the Message
menu.
pfk.x.feature =
messages
Configures the key to turn Do Not Disturb on or off.
Select the line for which you want to set the feature.
pfk.x.feature = dnd
The key is lit orange when DND is on.
((x: 1-14 and 16-20,
function key number)
Configures the key to turn Call Forward All on or off.
pfk.x.feature =
cfwd all
In the Line column, select the line for which Call
Forward All will apply.
pfk.x.line_number = 1
or 2
Do Not Disturb
Call Forward All
Before assigning the key, ensure that you configure
Call Forward settings on the Call Settings page.
Call Forward
Busy
Configures the key to turn Call Forward Busy on or
off.
In the Line column, select the line for which Call
Forward Busy will apply.
(x: 1-14 and 16-20,
function key number)
(x: 1-14 and 16-20,
function key number)
pfk.x.line_number = 1
or 2
(x: 1-14 and 16-20,
function key number)
pfk.x.feature =
cfwd busy
pfk.x.line_number = 1
or 2
(x: 1-14 and 16-20,
function key number)
Before assigning the key, ensure that you configure
Call Forward settings on the Call Settings page.
Call Forward No
Answer
Configures the key to turn Call Forward No Answer
on or off.
In the Line column, select the line for which Call
Forward No Answer will apply.
pfk.x.feature =
cfwd no answer
pfk.x.line_number = 1
or 2
(x: 1-14 and 16-20,
function key number)
Before assigning the key, ensure that you configure
Call Forward settings on the Call Settings page.
Park Call
Enables the user to park a call. Pressing the key dials
the Call Park feature access code (FAC) configured
on the Account Settings page.
pfk.x.feature =
park call
In the Line column, select the line (sip account) on
which the feature access code will be dialed out.
(x: 1-14 and 16-20,
function key number)
pfk.x.line_number = 1
or 2
For example, choose Line 1 if you wish to use the
Call Park FAC that you entered for account 1.
Retrieve Park
Call
Enables the user to retrieve a parked call. Pressing
the key dials the Parked Call Retrieval feature access
code (FAC) configured on the Account Settings page.
pfk.x.feature =
retrieve parked call
In the Line column, select the line on which the
feature access code will be dialed out.
(x: 1-14 and 16-20,
function key number)
pfk.x.line_number = 1
or 2
For example, choose Line 1 if you wish to use the
Parked Call Retrieval FAC that you entered for
account 1.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
40/106
Quick Dial
BLF (Busy Lamp
Field)
Configures the key to dial a number on the selected
line. After selecting Quick Dial, enter the number to
be dialed in the Value column. In the Line column,
select the line on which the number will be dialed
out.
pfk.x.feature =
quick dial
Configures the key to monitor another extension.
pfk.x.feature =
busy lamp field
In the Value column, enter the URI of the extension
you want to monitor with this key. For example,
6045552001@sipservice.com.
pfk.x.line_number = 1
or 2
If you are using list based BLF, the URI must be from
the BLF list you set up with your service provider and
entered under “Busy Lamp Field Settings” under SIP
Account Management.
In Call DTMF
Configures the key to dial a string of numbers while
the end user is on a call. For example, pressing the
key might dial a conference access code.
After selecting In Call DTMF, enter the number to be
dialed in the Value column.
Call return
Intercom
Group Call
Pickup
Direct Call
Pickup
N/A
pfk.x.line_number = 1
or 2
pfk.x.quick_dial =
(x: 1-14 and 16-20,
function key number)
pfk.x.blf=
(x: 1-5 and 11-15,
function key number)
pfk.x.feature =
in call dtmf
pfk.x.incall_dtmf =
(x: 1-14 and 16-20,
function key number)
Configures the key to dial the number of the last
missed call.
pfk.x.feature =
callback
Configures the key to call one or a group of phones.
You can configure Intercom calls to be automatically
answered. See “Page Auto Answer” under General
Account Settings.
pfk.x.feature = page
Enables the user to answer a call ringing at another
extension. The call can be ringing at any extension in
the phone’s call pickup group. Pressing the key dials
the Group Call Pickup feature access code (FAC)
configured on the Account Settings page.
pfk.x.feature =
group call pickup
Enables the user to answer a call ringing at a specific
deskset. Pressing the key dials the Direct Call Pickup
feature access code (FAC) configured on the Account
Settings page. Depending on the server
requirements, the user may then need to enter the
number of the ringing extension.
pfk.x.feature =
direct call pickup
The programmable key has no function assigned
pfk.x.feature =
unassigned
(x: 1-14 and 16-20,
function key number)
pfk.x.line_number = 1
or 2
(x: 1-14 and 16-20,
function key number)
pfk.x.line_number = 1
or 2
(x: 1-14 and 16-20,
function key number)
pfk.x.line_number = 1
or 2
(x: 1-14 and 16-20,
function key number)
pfk.x.line_number = 1
or 2
(x: 1-14 and 16-20,
function key number)
Access to F11F20 (Lower)
This function allows the user to switch between the
default function key group (F1 to F10) and the
second (F11 to F20).
pfk.5.feature =
pfk.15.feature =
lower
F15 can only be used for this function.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
41/106
lower
F5 has to be configured for this function as well if all
programmable keys are needed. If F5 has any other
function, then only F1 to F10 will be available.
When F5/F15 are configured to “Access F11-F20”,
the meaning of the led will be as follows:
Orange: F11-F20 are active. If user presses the key
on the left topmost position, F11 wil be triggered
Off: F1-F10 are active. If user presses the key on the
left topmost position, F1 wil be triggered
Temporis IP150 Administration and Provisioning Guide
ed 0.1
42/106
Memory Keys: Speed Dial
On the Speed Dial page, you can enter up to 10 speed dial numbers. For each speed dial
number you enter, you must assign the line on which the number will be dialed out.
To dial a speed dial number, press and hold the dial pad key that matches the speed dial
entry number. When for entry 10, press 0).
Note: This menu duplicates the speed dial menu on the phone (Main Menu > Features
> Speed dial). Entries that are entered and saved on the WebUI replace entries that
were entered using the phone, and viceversa.
Note: You can also assign programmable function keys to be quick dial keys, but users
cannot add or edit phone numbers for these keys. The Memory Keys page is primarily
intended for users to enter numbers that they personally want to dial often.
To enter speed dial numbers:
1. In the Name column, enter the name associated with this speed-dial entry.
2. In the Value column, enter a phone number for the desired key.
3. In the Line column, select the line that this speed dial number will use.
4. Click Save.
Speed Dial Keys
Setting
Description
Range
Default
Name Value
A name associated to this memory key.
string
blank
The phone number that the memory key
dials when pressed and held.
SIP URI
blank
The SIP account (line) the phone will use
to dial the number.
1: Line 1
1
memory_key.x.name
( x: 0-9)
Number Value
memory_key.x.number
(x: 0-9)
Line
memory_key.x.line
2: Line 2
(x: 0-9)
Temporis IP150 Administration and Provisioning Guide
ed 0.1
43/106
Signaling Settings
Voice Settings
Setting
Description
Range
Default
Local RTP port range
start
0-65535
18000
network.rtp.port_start
Real-time Transport Protocol
(RTP) Ports are entered as a
range. This range is usually
specified by your service provider.
Enter the lower limit of the RTP
port range.
Local RTP port range
stop
Enter the upper limit of the RTP
port range.
0-65535
19000
network.rtp.port_end
NAT Traversal
Setting
Description
Range
Default
Enable Masquerading
Select to enable NAT
traversal via IP
masquerading.
1: Enabled
0
Enter the external IP
address of your router.
Your router needs a static
IP address for IP
masquerading to work.
IP address
n/a
Enter the router port
number being used for
SIP.
0-65535
5060
network.nat.masquerading_enable
Public IP address
network.nat.public_ip_addr
Public SIP port
network.nat.public_sip_port
Temporis IP150 Administration and Provisioning Guide
0: Disabled
ed 0.1
44/106
Public RTP port range start
network.nat.public_rtp_port_start
Public RTP port range stop
network.nat.public_rtp_port_end
Real-time Transport
Protocol (RTP) Ports are
entered as a range. This
range is usually specified
by your service provider.
Enter the lower limit of
the RTP port range.
0-65535
18000
Enter the upper limit of
the RTP port range.
0-65535
19000
Temporis IP150 Administration and Provisioning Guide
ed 0.1
45/106
Ringer Settings
The Ringer Settings enable you to provide a distinctive ringing feature via the custom
Alert-Info header associated with an incoming call. This setting overrides the ringer tone
you have set for the account. For example, you can set a unique ringer tone to alert the
deskset user upon receiving any incoming calls tagged as "important" or “External” in the
Alert-Info header.
The SIP Invite message contains an Alert-Info header that the phone checks in order to
determine which ringer tone to play. The Alert-Info header format is as follows:
Alert-Info: info=info_text
If the header contains the “info” parameter, the phone attempts to match it to the
Internal Ringer Text. If there is a match, the Internal Ringer Tone will play. If there is no
match, the default tone for the account will play.
The matching is done on a “first match” basis. In the case of duplicate text strings, the
ringer tone associated with the first matched entry in the Internal Ringer Text list will
play.
The server-side configuration must be done with your service provider. This is where the
SIP Invite text (“Internal Ringer Text”) will be derived.
Setting
Description
Range
Default
Internal Ringer Text
Enter the text that will match
the “info” parameter and play
the ringer tone.
String, up to
40 characters
blank
Ringer 1 to –
Ringer 10 (110)
1
ringersetting.x.ringer_text
(x= 1-8)
Internal Ringer Tone
ringersetting.x.ringer_type
The matching of the “info”
parameter and Internal
Ringer Text is case sensitive.
The maximum length of the
Internal Ringer Text is 40
characters.
Select the desired ringer from
the list.
(x=1-8)
Temporis IP150 Administration and Provisioning Guide
ed 0.1
46/106
Network
You can set up the phone for your network configuration on the Network settings page.
Your service provider may require you to configure your network to be compatible with
its service, and the phone settings must match the network settings.
Basic Network Settings
Note: If you disable DHCP on this page, you must configure static IP settings for the
phone. You must be familiar with TCP/IP principles and protocols to configure static IP
settings.
Basic Network Settings
Setting
Description
Range
Default
Enable DHCP
DHCP is selected (enabled) by
default, which means the deskset
will get its IP address from the
network.
1: Enabled,
0: Disabled
1
If DHCP is disabled, enter a
static IP address for the deskset.
IPv4
blank
Enter the subnet mask.
IPv4
blank
Enter the static IP address of the
default gateway (in this case,
your router).
IPv4
blank
If DHCP is disabled or you don’t
wish to use the DHCP-assigned
IPv4
blank
network.ip.dhcp_enable
IP Address
network.ip.static_ip_addr
Subnet Mask
When DHCP is disabled, you
must enter a static IP address for
the deskset.
network.ip.subnet_mask
Gateway Address
network.ip.gateway_addr
Primary DNS Server
network.ip.dns1
Temporis IP150 Administration and Provisioning Guide
ed 0.1
47/106
Secondary DNS Server
network.ip.dns2
DNS server (or one specified by
your service provider), enter IP
addresses for the primary and
secondary DNS servers.
Advanced Network Settings
VLAN Settings
You can organize your network and optimize VoIP performance by creating a virtual LAN
for phones and related devices.
Setting
Description
Range
Default
Enable WAN VLAN
Enable if the phone is part of a
VLAN on your network. Select to
enable.
0: Disabled
0
Enter the VLAN ID (vlan 5, for
example).
0–4095
0
Select the VLAN priority that
matches the Quality of Service
(QoS) settings that you have set
for that VLAN ID. Outbound
packets will be marked and sent
according to their priority.
0–7
0
network.vlan.wan.enable
VLAN ID
network.vlan.wan.id
Priority
network.vlan.wan.priority
1: Enabled
7 is the highest priority. Note:
Configuring the Quality of Service
(QoS) settings for your router or
switch is a subject outside the
scope of this document.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
48/106
Enable PC Port VLAN
network.vlan.pc.enable
VLAN ID
network.vlan.pc.id
Priority
Enable if the PC connected to your
phone’s PC port is part of a VLAN
on your network. Select to enable.
0:Disabled
0
Enter the PC Port VLAN ID (vlan 5,
for example).
0–4095
0
Select the VLAN priority that
matches the Quality of Service
(QoS) settings that you have set
for that VLAN ID. Outbound
packets will be marked and sent
according to their priority.
0–7
0
1: Enabled
7 is the highest priority.
Note: Configuring the Quality of
Service (QoS) settings for your
router or switch is a subject
outside the scope of this
document.
network.vlan.pc.priority
LLDP-MED
Setting
Description
Range
Default
Enable LLDP-MED
Enables or disables LLDP-MED on
the phone. Select (enable) if your
switch is LLDP-MED capable.
0:Disabled
0
1: Enabled
Link Layer Discovery Protocol for
Media Endpoint Devices (LLDPMED) is a standards-based
discovery protocol supported on
some network switches. Amongst
other functions, it enables network
devices (such as switches) and
endpoint devices (the deskset) to
manage PoE, and assists
administrators in tracking devices
on the network.
network.lldp_med.enable
Packet Interval (secs)
Enter here the interval in seconds
between LLDP packets.
1–30
30
network.lldp_med.interval
802.1x
Setting
Description
Range
Default
Enable 802.1x
Enables the 802.1X authentication
protocol. This provides the phone
with secure access to the network
when an 802.1X compliant
authentication server is used.
Consult your service provider.
0:Disabled
0
network.eapol.enable
Temporis IP150 Administration and Provisioning Guide
1: Enabled
ed 0.1
49/106
Identity
Integer
string
blank
MD5 password.
string
blank
network.eapol.identity
MD5 Password
network.eapol.password
Temporis IP150 Administration and Provisioning Guide
ed 0.1
50/106
Contacts
Local Directory
On the Local Directory page, you can manage your local directory entries. You can sort,
edit, delete, and add contact information for up to 200 entries. In order to back up your
contacts or import another local directory file, the page also allows you to export and
import your phone’s local directory.
The Local Directory lists entries on up to 10 pages, with 20 entries per page. Click Next,
First, Last, or a page number to view the desired page of entries.
NOTE: You can also use the phone menu to manage local directory entries. For more
information, see the Temporis IP150 IP Phone User Guide.
Directory Import/Export
The best way to create a directory file for import is to first export the directory from the
phone using the “Export” button. After exporting the file, open it in an .xml editor and
add or modify entries.
You can import your modified directory file by clicking on “Import” after browsing and
selecting it.
Directory files are .xml files that have the following tags:
Local Directory WebUI field
Directory file XML tag
First Name
<DIR_ENTRY_NAME_FIRST>
Last Name
<DIR_ENTRY_NAME_LAST>
Home Number
<DIR_ENTRY_NUMBER_HOME>
Work Number
<DIR_ENTRY_NUMBER_WORK>
Mobile Number
<DIR_ENTRY_NUMBER_MOBILE>
Line
<DIR_ENTRY_LINE_NUMBER>
Call Block (not on WebUI)
<DIR_ENTRY_BLOCK>
Ringer Tone
<DIR_ENTRY_RINGER>
Temporis IP150 Administration and Provisioning Guide
ed 0.1
51/106
Note you can click on an entry to dial out this number. This feature can be
enabled/disabled using configuration files, and is enabled by default. See next
subchapter.
Click
To…
Sort the list by last name.
Edit information for an entry
View the last page of entries.
View the next page of entries.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
52/106
Delete selected entries from the directory. Click Select All
to select every entry on the page you are viewing.
Add a new directory entry.
Delete all Directory entries.
To add a new directory entry:
1. Click Add New Entry.
The Add New Local Directory Entry page appears.
2. Enter the required information. At minimum, a first and last name are required.
Create New Entry
Setting
Description
Range
Default
Call Block (not
on WUI)
Blocks incoming calls with caller ID
matching the directory entry.
Enable,
Disable
Disable
First Name
Enter the appropriate names in these
fields. The maximum length of the
first name and last name fields is 15
characters.
n/a
blank
Ringer Tone
Sets a unique ringer tone for calls
from this directory entry.
Auto, Tone
1–10
Tone 1
Dial Line
Sets the line used when you dial this
directory entry.
Line 1–2
Line 1
string
blank
Last Name
Home Number
Work Number
Enter the appropriate names and
numbers in these fields.
Mobile Number
Temporis IP150 Administration and Provisioning Guide
ed 0.1
53/106
Directory Import using configuration files
You can also upload your local directory via configuration files. Related parameters are as
follows:
Setting
Description
Range
Default
Contact Import url (append
mode, not in WUI)
Sets the url from which the
phone will try to fetch the
directory file during
provisioning process.
URI
blank
URI
blank
0: Disabled
1
The URL must point to an xml
file formatted as described
above.
file.contact.directory.append
Contact Import url (overwrite
mode, not in WUI)
Contacts in the xml file will be
appended to existing entries.
Sets the url from which the
phone will try to fetch the
directory file during
provisioning process.
The URL must point to an xml
file formatted as described
above.
file.contact.directory.overwrite
Click-to-dial (Not in WUI)
provisioning.click_to_dial
Contacts in the xml file will
overwrite existing entries.
Enables or disables the
capability to dial a contact
entry by clicking on it in the
WUI.
Temporis IP150 Administration and Provisioning Guide
1: Enabled
ed 0.1
54/106
Black List
On the Black List page, you can manage those contacts whose incoming calls you would
like to block.
You can sort, edit, delete, and add contact information. In order to back up your blocked
contacts or import others, the page also allows you to export and import your phone’s
black list.
The interface and modus operandi are similar to Local Directory, so we will only repeat
relevant aspects here.
Black List Import/Export
The best way to create a black list file for import is to first export the directory from the
phone using the “Export” button. After exporting the file, open it in an .xml editor and
add or modify entries.
You can import your modified directory file by clicking on “Import” after browsing and
selecting it.
Directory files are .xml files that have the following tags:
Black List WebUI field
Black List file XML tag
First Name
<BLACKLIST_ENTRY_NAME_FIRST>
Last Name
<BLACKLIST_ENTRY_NAME_LAST>
Temporis IP150 Administration and Provisioning Guide
ed 0.1
55/106
Black List WebUI field
Black List file XML tag
Home Number
<BLACKLIST_ENTRY_NUMBER_HOME>
Work Number
<BLACKLIST_ENTRY_NUMBER_WORK>
Mobile Number
<BLACKLIST_ENTRY_NUMBER_MOBILE>
Line
<BLACKLIST_ENTRY_LINE_NUMBER>
NOTE: You can also use the phone menu to manage your Black List. For more
information, see the Temporis IP150 IP Phone User Guide.
Black List Import using configuration files
You can also upload your local black list via configuration files during provisioning.
Related parameters are as follows:
Setting
Description
Range
Default
Black List Import url (append
mode, not in WUI)
Sets the url from which the
phone will try to fetch the
black list file during
provisioning process.
URI
blank
URI
blank
ed 0.1
56/106
The URL must point to an xml
file formatted as described
above.
file.contact.blacklist.append
Contact Import url (overwrite
mode, not in WUI)
Contacts in the xml file will be
appended to existing entries.
Sets the url from which the
phone will try to fetch the
black list file during
provisioning process.
The URL must point to an xml
file formatted as described
above.
file.contact.blacklist.overwrite
Contacts in the xml file will
overwrite existing entries.
Temporis IP150 Administration and Provisioning Guide
LDAP Directory
On the LDAP page, you can configure your phone to use a remote LDAP directory server.
Setting
Description
Range
Default
Enable LDAP
Select to enable or disable
LDAP remote directory
0: Disabled
0
Enter the name to be
displayed to the user when
accessing LDAP directory
through phone menu or
programmable key.
string
blank
Enter LDAP server IP
address or fqdn.
string
blank
Enter remote LDAP server
port. Normally 389.
0-65535
389
1: Enabled
remoteDir.ldap_enable
Directory Name
remoteDir.ldap_directory_name
Server address
remoteDir.ldap_server_address
Server Port
remoteDir.ldap_server_port
Temporis IP150 Administration and Provisioning Guide
ed 0.1
57/106
LDAP version
remoteDir.ldap_protocol_version
Authentication scheme
remoteDir.ldap_authentication_type
Authentication name
remoteDir.ldap_user_name
Authentication password
remoteDir.ldap_password
Base
Select protocol version (v2
or v3) your LDAP server
uses.
version_2,
version_3
version_2
Select scheme your LDAP
server uses to
authenticate users.
simple, ssl
simple
Enter name used to
authenticate your phone
as a user in front of the
LDAP server.
string
blank
Enter password to
authenticate your phone
as a user in front of the
LDAP server.
string
blank
Enter base directory
(distinguished name of
string
blank
Enter maximum number of
search results to be
displayed.
0-32000
200
Enter timeout before
displaying search results.
0-500
0
Enter search criteria for
first name look up
(rfc2254).
string
blank
Enter search criteria for
last name look up
(rfc2254).
string
blank
Enter search criteria for
number look up (rfc2254).
string
blank
Enter LDAP attribute the
phone should use to
display first names.
string
blank
Enter LDAP attribute the
phone should use to
display last names.
string
blank
Enter LDAP attribute the
phone should use to
display work phone
string
blank
the search base object)
remoteDir.ldap_base
Maximum number of entries
remoteDir.ldap_max_hits
Maximum search delay (seconds)
for LDAP searches.
remoteDir.ldap_search_delay
First name filter
remoteDir.ldap_firstname_filter
Last name filter
remoteDir.ldap_lastname_filter
Phone number filter
remoteDir.ldap_number_filter
First name attribute
remoteDir.ldap_firstname_attribute
Last name attribute
remoteDir.ldap_lastname_attribute
Work phone number attribute
Temporis IP150 Administration and Provisioning Guide
ed 0.1
58/106
remoteDir.ldap_work_number_attributes
Mobile phone number attribute
remoteDir.ldap_mobile_number_attributes
Home phone number attribute
remoteDir.ldap_home_number_attributes
Lookup for in-call
remoteDir.ldap_incall_lookup_enable
Lookup for out-call
remoteDir.ldap_outcall_lookup_enable
numbers.
Enter LDAP attribute the
phone should use to
display mobile phone
numbers.
string
blank
Enter LDAP attribute the
phone should use to
display home phone
numbers.
string
blank
Select to enable or disable
queries to the LDAP
remote directory when an
incoming call is received in
order to find any Caller ID
matches.
0: disabled
0
Select to enable or disable
queries to the LDAP
remote directory while
dialing in order to
dynamically suggest users
matching dialled digits.
0: disabled
Temporis IP150 Administration and Provisioning Guide
1: enabled
0
1: enabled
ed 0.1
59/106
Broadsoft Directory
On Broadsoft page, you can configure your phone to use a remote Broadsoft directory
server.
Check with your service provider for more details.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
60/106
Setting
Description
Range
Default
Enable Broadsoft Phonebook
Select to enable or
disable Broadsoft
remote directory
0: Disabled
0
Enter Broadsoft item to
be used.
item_1,
1: Enabled
remoteDir.broadsoft_enable
Broadsoft Item
item_1
item_2,
item_6
remoteDir.broadsoft_item
Broadsoft display name
remoteDir.broadsoft_display_name
Server address
Enter the name to be
displayed to the user
when accessing
Broadsoft directory
through phone menu or
programmable key.
string
Blank
Enter Broadsoft
directory server IP
address or fqdn.
string
Blank
Enter Broadsoft
directory server port
0-65535
0
Enter user name for
authentication in front of
Broadsoft directory
server.
string
Blank
Enter password for
authentication in front of
Broadsoft directory
server.
string
blank
remoteDir.broadsoft_server
Server port
remoteDir.broadsoft_port
Broadsoft authentication name
remoteDir.broadsoft_user_name
Broadsoft authentication password
remoteDir.broadsoft_password
Temporis IP150 Administration and Provisioning Guide
ed 0.1
61/106
Call History
On Call History page you can review your call log details. Missed, received and dialled
calls are shown in separate tables.
You can also click-to-call entries in these lists.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
62/106
Servicing
Reboot
Reboot page allows you to perform a remote restart of your phone by clicking on the
“Reboot” button.
Restart can also be triggered via phone menu (Menu>>4.Admin settings>>5.Restart
phone), or with the shortcut “Long press
key”
Time and Date
On the Time and Date menu, you can manually set the time and date, and the time and
date formats. You can also set the system time to follow a Network Time Protocol (NTP)
Server (recommended) or you can set the time and date manually.
After changing any settings on this page, click Save to save them.
Time and Date Settings
Setting
Description
Range
Default
Date Format
Sets the date format.
DD/MM/YY,
MM/DD/YY,
YY/MM/DD
DD/MM/YY
Sets the clock format.
1: 24 Hour
0
time_date.date_format
Time Format
time_date.24hr_clock
Temporis IP150 Administration and Provisioning Guide
0: 12 Hour
ed 0.1
63/106
Network Time Settings
Setting
Description
Range
Default
Enable Network Time
Enables or disables getting
time and date information for
your phone from the
Internet.
1: Enabled
1
If Enable Network Time is
selected, enter the URL of
your preferred time server.
IPv4 or fqdn
europe.pool.ntp.org
With Enable Network Time is
selected, tick this option to
use DHCP to locate the time
server. Option 42 specifies
the NTP server available to
the phone. When enabled,
the phone obtains the time in
the following priority: 1.
Option 42 2. NTP Server 3.
Manual time.
1: Enabled
0
time_date.ntp_server
NTP Server
time_date.ntp_server_addr
Use DHCP (Option 42)
time_date.ntp_dhcp_option
Temporis IP150 Administration and Provisioning Guide
0: Disabled
0: Disabled
ed 0.1
64/106
Time Zone and Daylight Savings Settings
Setting
Description
Range
Default
Time Zone
Select your time zone.
See appendix
Europe/Paris
Select to adjust the clock
for daylight savings time
according to the NTP server
and time zone setting. To
disable daylight savings
adjustment, leave this
setting and User-defined
Daylight Savings Time
unchecked.
1: Enabled
1
Select to set your own start
and end dates and offset
for Daylight Savings time.
1: Enabled
time_date.timezone_offset
Automatically adjust clock for
Daylight Savings
time_date.daylight_saving
User-defined Daylight Savings Time
time_date.daylight_saving_user_defined
Daylight Savings Start
time_date.daylight_saving_start_month
time_date.daylight_saving_start_week
0: Disabled
0
0: Disabled
To disable daylight savings
adjustment, leave this
setting and Automatically
adjust clock for Daylight
Savings unchecked.
Set the start date and time
for user-defined daylight
savings: Month, week, day,
and hour.
time_date.daylight_saving_start_day
time_date.daylight_saving_start_hour
Daylight Savings End
time_date.daylight_saving_end_month
time_date.daylight_saving_end_week
Set the end date and time
for user-defined daylight
savings: Month, week, day,
and hour.
time_date.daylight_saving_end_day
time_date.daylight_saving_end_hour
Daylight Savings Offset (minutes)
time_date.daylight_saving_amount
Use DHCP (Option 2/100/101)
time_date.timezone_dhcp_option
Sets the daylight savings
offset (in minutes) if you
are in a region that
observes daylight savings
time. Selecting a setting
other than Off immediately
sets the clock ahead by the
selected time.
0, 30, 60
60
If Enable Network Time is
selected, tick to use DHCP
to determine the time zone
offset. Options 2, 100 and
101 determine time zone
information.
1: Enabled
0
Temporis IP150 Administration and Provisioning Guide
0: Disabled
ed 0.1
65/106
NTP server update interval (secs)
(Not in WUI)
Enter interval in seconds to
refresh time information
with NTP server
04294967295
1000
time_date.ntp_server_update_interval
Manual Time Settings
Setting
Description
Date
Select the current year, month, and day.
Time
Sets the current hour, minute, and second.
Click Apply Now to start the phone using the manual time settings.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
66/106
Firmware Upgrade
You can update the phone with new firmware using the following methods:


Retrieving a firmware update file from a remote host computer and accessed via a
URL. This central location may be arranged by you, an authorized distributor, or
your SIP service provider. See Firmware Server Settings.
Using a file located on your computer or local network. No connection to the
Internet is required. Consult your distributor for access to firmware update files.
See Manual Firmware Update Settings.
Firmware Server Settings
Setting
Description
Range
Default
Firmware Server File URL
The URL where the firmware update file
resides. This should be a full path,
including the filename of the firmware
file.
string
blank
Authentication username for the firmware
server
string
blank
Authentication password for the firmware
server
string
blank
provisioning.firmware_url
Server authentication name
provisioning.fw_server_username
Server authentication
password
provisioning.fw_server_password
To update the firmware from a remote host:
1. Enter the URL where the firmware update file resides. This should be a full path,
including the filename of the firmware file.
2. Go to Manual Upgrade page and click Upgrade firmware now.
Note: This URL will be saved when you click Save on the Admin Settings page. You can
also configure the phone to check for firmware updates at regular intervals or at reboot.
See the Provisioning page.
Manual Firmware Update and Upload
On the Manual Firmware Update Settings page, you can prompt the phone to
immediately download a new firmware file (if available). To update the firmware
immediately from the previously programmed url, click Update Firmware Now.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
67/106
To update the firmware using a file on your computer or local network:
1. On the Manual Firmware Update page, click Choose File to locate and open the
firmware update file.
2. Click Update from File.
The phone will update its firmware and restart.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
68/106
Provisioning
Provisioning refers to the process of acquiring and applying new settings for the phone
using configuration files retrieved from a remote computer. After a phone is deployed,
subsequent provisioning can update the phone with new settings; for example, if your
service provider releases new features.
With automatic provisioning, you enable the phone to get its settings automatically—the
process occurs in the background as part of routine system operation. Automatic
provisioning can apply to multiple phones simultaneously.
With manual provisioning, you update the phone settings (configuration and/or firmware)
yourself. Manual provisioning can only be performed on one phone at a time.
On the Provisioning page, you can enter settings that will enable the IP phone to
receive automatic configuration and firmware updates. The Provisioning page also allows
you to manually update phone configuration from a locally stored configuration file using
an Import function. You can also export the phone’s configuration—either to back it up or
to apply it to another phone—to a file on your computer.
The provisioning process functions according to the Resynchronization settings and
Provisioning Server Settings. The phone checks for the provisioning URL from the
following sources in the order listed below. If one of these sources is disabled, not
available, or has not been configured, the phone proceeds to the next source until
reaching the end of the list.
1. DHCP Options—this setting is set on the WebUI and/or the configuration file. Before
enabling the DHCP options on the Provisioning page, ensure that DHCP is enabled on
the Network > Basic settings page. Otherwise, enabling DHCP for provisioning will not
work.
2. Preconfigured URL—this setting is set on the WebUI and/or the configuration file.
After changing any settings on this page, click Save to save them.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
69/106
Provisioning Server Settings
Setting
Description
Range
Default
Use DHCP
Enables the phone to use DHCP
options to locate and retrieve the
configuration file, starting with the
highest priority option.
1:Enabled
1
0:Disabled
When selected, the phone
automatically attempts to get a
provisioning server address, and
then the configuration file. If DHCP
options do not locate a configuration
file, then the server provisioning
string is checked.
provisioning.dhcp_option_enable
DHCP Option Priority 1
provisioning.dhcp_option_priority_1
DHCP Option Priority 2
provisioning.dhcp_option_priority_2
DHCP Option Priority 3
provisioning.dhcp_option_priority_3
DHCP 60
network.vendor_class_id
DHCP 77
Note: Ensure that DHCP is also
enabled on the Network > Basic
settings page.
If DHCP is enabled, sets the DHCP
Option priority. Select the highest
priority option.
66, 159,
160
66
If DHCP is enabled, sets the DHCP
Option priority. Select the second
highest priority option.
66, 159,
160
159
If DHCP is enabled, sets the DHCP
Option priority. Select the third
highest priority option.
66, 159,
160
160
DHCP Option 60 is available to send
vendor-specific information to the
DHCP Server.
string
Alcatel
Temporis
IP150
This way the server can make
decisions regarding DHCP options or
network parameters to assign to the
device.
DHCP Option 77 is available to send
vendor-specific information to the
DHCP Server.
string
URL of the provisioning file(s). The
format of the URL must be RFC 1738
compliant, as follows:
“<schema>://<user>:<password>@
<host>:<port>/<url-path>”
URL
Temporis
IP150
network.user_class
Server provisioning string
provisioning.provisioning_server_type
provisioning.server_address
provisioning.server_port
.com
“<port>” can be omitted if you do
not need to specify the port number.
ed 0.1
https://
art.atlinks
“<user>:<password>@” may be
empty.
Temporis IP150 Administration and Provisioning Guide
Alcatel
70/106
Server authentication name
provisioning.server_username
Server authentication password
provisioning.server_password
User name for access to the
provisioning server
n/a
n/a
Password for access to the
provisioning server
n/a
n/a
Resynchronization
Setting
Description
Range
Default
Mode
Sets which files the
phone checks for at
regular intervals.
config_only:
Configuration
config_and_firmware
It can check for
configuration files,
firmware update
files (from the URL
entered on the
Admin Settings
page), or both.
provisioning.resync_mode
Bootup Check
provisioning.bootup_check_enable
Interval (minutes)
provisioning.resync_time
firmware_only:
Firmware
config_and_firmware:
Both
Note: When
checking for both
config and firmware
files, the firmware
URL can be within
the config file. This
firmware URL takes
take precedence
over the url on the
admin settings
page. It will also
update the URL on
the admin settings
page. This allows
you to change the
firmware URL
automatically.
Sets the phone to
check the
provisioning URL
for new
configuration
and/or firmware
files upon boot
up. The update is
applied as part of
the reboot
process.
1: On
Sets an interval,
in minutes, for
periodically
checking for
updates.
0-65535
Temporis IP150 Administration and Provisioning Guide
1
0: Off
0
0 means no
periodic resync will
happen
ed 0.1
71/106
Use encryption
Enables an AESencrypted
configuration file
to be decrypted
before being
applied to the
phone.
0: Disabled
0
1: Enabled
Select if the
configuration file
has been secured
using AES
encryption.
provisioning.crypto_enable
Passphrase
provisioning.crypto_passphrase
Remote Check Sync
(Not in WUI)
provisioning.remote_check_sync_enable
See Securing
Configuration Files
with AES
Encryption.
If the
configuration file
has been secured
using AES
encryption, enter
the 16-bit key.
String
Blank
0: Disabled
1
See Securing
Configuration Files
with AES
Encryption.
If enabled, the
phone will react to
a NOTIFY(checksync) in order to
launch automatic
provisioning.
Temporis IP150 Administration and Provisioning Guide
1: Enabled
ed 0.1
72/106
Import Configuration
You can configure the phone by importing a configuration file from your computer or your
local network. For more information about configuration file types and configuration file
formatting, see Provisioning Using Configuration Files on page 80.
To import a configuration file:
1. Click Browse to locate and open the configuration file.
2. Click Import.
The phone will update its configuration. If any of the updated settings require the phone
to restart, the phone will restart immediately, without waiting for one minute of activity.
Manually importing a configuration file differs from the auto-provisioning process in that
the phone does not check whether the file has been loaded before. The configuration file
is processed whether or not it is different from the current version.
Export Configuration
You can export all the settings you have configured on the WebUI and save them as a
configuration file on your computer. You can then use this configuration file as a backup,
or use it to update other phones.
To export the configuration file:
1. Click Export.
The format of the exported file is <model name>_<mac address>.cfg. For example,
Temporis_IP150_7465D1161234.cfg.
Exporting a configuration file generates two header lines in the configuration file. These
header lines provide the model number and software version in the following format:
#Model Number = xxxxxxx
#SW Version = xxxxxxx
You can use the exported file as a general configuration file, and duplicate the settings
across multiple units. However, ensure that you edit the file to remove any unit-specific
SIP account settings before applying the file to other units.
Reset Configuration
To reset the phone to its default configuration:
Under Reset Configuration, click Reset.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
73/106
Security
On the Security page you can reset the admin password, reset the user password, and
enter web server settings.
After changing any settings on this page, press Save to save them.
Administrator Password
Setting
Description
Range
Default
Admin password: Enter old
password
Enter admin password.
String
admin
Admin password: Enter new
password
The password is case
sensitive and can consist of
both numbers and letters.
Admin password: Re-enter old
password
profile.admin.password
To change the admin password:
1. Enter the old password (for a new phone, the default password is admin).
2. Enter and re-enter a new password.
3. Click Save.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
74/106
User Password
Setting
Description
Range
Default
User password: Enter old
password
Enter user password.
String
user
The password is case
sensitive and can consist of
both numbers and letters.
User password: Enter new
password
User password: Re-enter old
password
profile.user.password
To change the User password:
1. Enter the old password (for a new phone, the default password is user).
2. Enter and re-enter a new password. The password is case sensitive and can consist of
both numbers and letters.
3. Click Save.
Web Server Settings
Setting
Description
Range
Default
HTTP Server port
Sets the port where the embedded HTTP
server is accessible
0–65535
80
Sets the server to use the HTTPS
protocol.
1: Enabled
0
Port used by the embedded HTTPS
server.
0–65535
web.http_port
Enable Secure Browsing
web.https_enable
HTTPS Server port
web.https_port
0: Disabled
To configure Web Server Settings:
1. Enter the HTTP Server port number. The default setting is 80.
2. Enable or Disable Secure Browsing. When enabled, the HTTPS protocol is used, and
you must select the HTTPS server port in the next step.
3. Enter the HTTPS server port number. The default setting is 443.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
75/106
443
Certificates
TLS (Transport Layer Security) transport requires security certificates to establish a
secure connection between phone and server.
You can upload one or more certificates to the phone using WUI and/or configuration
files.
To upload a web server certificate:
1. Under Server Certificate, click Choose File.
2. Locate the certificate file and click Open.
3. On the Certificates page, click Import.
In the configuration file, the web certificate is specified by the file.https_user.certificate
parameter.
Setting
Description
Range
Defa
ult
Import Server Certificate
Enter url to download
Server Certificate from
URI
blank
Enter url to download
Provisioning Certificate
from
URI
blank
When enabled, only
trusted servers can be
used for https provisioning
0: Disabled
0
Enter url to download TLS
Certificate from
URI
blank
When enabled, account x
using TLS will only
accepted trusted servers
0: Disabled
0
When enabled, different
0: Disabled
file.https_user.certificate
Import Provisioning Certificate
file.provisioning.trusted.certificate
Only accept trusted Provisioning certificate
provisioning.check_trusted_certificate
Import TLS transport Certificate
file.sips.trusted.certificate.x
Only accept trusted TLS certificate
sip_account.x.check_trusted_certificate
Use first TLS Certificate for all accounts
Temporis IP150 Administration and Provisioning Guide
ed 0.1
1: Enabled
1: Enabled
76/106
0
sip_account.use_first_trusted_certificate_for_all
Import LDAP Certificate
file.ldap.trusted.certificate
Only accept trusted LDAP certificate
remoteDir.ldap_check_certificate
Import Broadsoft Certificate
file.broadsoft.trusted.certificate
Only accept trusted Broadsoft certificate
remoteDir.broadsoft_check_certificate
certificates for different
accounts will not be
required for TLS transport
1: Enabled
Enter url to download
LDAP certificate from
URI
blank
When enabled, only
trusted servers can be
used for LDAP
0: Disabled
0
Enter url to download
Broadsoft directory
Certificate from
URI
blank
When enabled, only
trusted servers can be
used for Broadsoft
directory
0: Disabled
0
Temporis IP150 Administration and Provisioning Guide
ed 0.1
1: Enabled
1: Enabled
77/106
System Logs
On the System Logs page, you can enter settings related to system logging activities.
You can also generate and download network traces.
Syslog Settings
Setting
Description
Range
Default
Enable Syslog
Enable log output to syslog server.
1: Enabled
Disabled
0: Disabled
log.syslog_enable
Server Address
Syslog server IP address.
IPv4
blank
Syslog server port.
0–65535
514
log.syslog_server_address
Server port
log.syslog_server_port
Log Level
Sets the level of logging. The higher the
level, the larger the debug output.
log.syslog_level
5:
4:
3:
2:
1:
0:
ALL
DEBUG
INFO
WARNING
ERROR
CRITICAL
After entering the Syslog Settings, click Save.
The logging levels are:



CRITICAL: Operating conditions to be reported or corrected immediately (for
example, an internal component failure or file system error).
ERROR: Non-urgent failures—unexpected conditions that won't cause the device
to malfunction.
WARNING: An indication that an error or critical condition can occur if action is
not taken.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
78/106
2


INFO: Normal operational messages.
DEBUG: Developer messages for troubleshooting/debugging purposes.
Network Capture
To generate a pcap trace press “Start Capture”
To stop tracing, press “Stop Capture”
To download your capture press “Save to file”
Download Log
To download a copy of the system logs press “Save log to file”
Temporis IP150 Administration and Provisioning Guide
ed 0.1
79/106
Provisioning Using Configuration Files
Provisioning using configuration files is the quickest way to configure multiple phones.
You can place configuration files on a provisioning server, where the phones can retrieve
them and update their configuration automatically.
Configuration files have the extension .cfg and contain parameters that define various
phone settings. To edit a configuration file, open it with a text editor such as Notepad.
Configuration files consist of settings that are grouped into modules. Most of the modules
group their settings in the same way that settings are grouped on the WebUI. For
example, the “time_date” module contains the same settings that are on the Time and
Date WebUI page.
Using the WebUI, you can also import a configuration file and apply the configuration file
settings to that phone. For more information, see Provisioning.
Resynchronization—Configuration File Checking
You can select a number of options to set when the phone checks for new configuration
files. This process of checking for configuration files is called Resynchronization.
Resynchronization options are available on the WebUI Provisioning page, but you can
also include them in a configuration file.
The resynchronization options are:




Mode—sets the phone to check for a configuration file only, a firmware update file
only, or both types of file.
Bootup: configuration file checking at reboot is enabled or not
Remote check-sync—enables you to start a resynchronization remotely using your
hosted server’s web portal. If the update includes settings that require the phone
to reboot, the phone will reboot after one minute of inactivity. The Remote checksync settings are available only in the configuration file, not the WebUI.
Repeatedly, at a defined interval from 0 (disabled) to 65535 minutes (45 days).
The Provisioning Process
The phone’s automatic provisioning process is as follows:
1. Find configuration server location. The phone will try to fetch its configuration
information from the URLs indicated in the DHCP options (if enabled), following the
priority set for opts 66, 159, 160. If the download is not successful, then it will try the
fixed url set at “Provisioning server string”
2. Download the configuration files.
The phone fetches the following two files:


General file: <model>.cfg
MAC-specific file: <model>_<MAC Address>.cfg
Thus, for Temporis IP150 the files would be Temporis_IP150.cfg and
Temporis_IP150_<MACAddress>.cfg
3. Check updates. The phone maintains a list of the last loaded provisioning files and
their digital signature. The phone compares its current configuration against the files
it finds on the provisioning server.
4. If any of the changed settings require the phone to restart, the phone restarts.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
80/106
During provisioning, the phone reads the configuration file and validates each module
and setting are validated. The phone considers a setting valid if it is:




a valid data type
formatted as a valid setting
within a valid data range
part of a module that passes an integrity check. That is, the module’s settings are
consistent and logical. For example, in the “network” module, if DHCP is disabled,
but no static IP address is specified, the module will fail the integrity check and
none of the settings will apply.
Invalid modules or invalid settings are skipped and logged as ERRORs in the system log,
but will not interrupt the provisioning process. The system log will include the module
parameters that have not been applied. A recognized module with unrecognized settings
will cause all other settings in that module to be skipped.
A successful configuration or firmware update is reported as an INFO message in the
system log.
See Appendix A: Configuration File Settings for the options and value ranges available for
each configuration file setting.
Phone Restart
If the phone needs to restart after an auto-update, the restart happens only after the
phone has been idle for one minute.
To prevent users from delaying the update process, or to avoid phone restarts that might
interfere with incoming calls, either set the “repeatedly” resynchronization interval to a
suitable period, or upload any new configuration file(s) to your provisioning server after
work hours so that the phones will download the file(s) when there is little or no call
activity.
When you update the phone by importing a configuration file using the WebUI, the phone
restarts immediately after applying any new settings that require a restart, regardless of
whether the phone is idle.
Configuration File Types
The phone is able to retrieve and download two types of configuration file. Depending on
your requirements, you may want to make both types of configuration file available on
your provisioning server.
The two configuration file types are a general configuration file and a MAC-specific
configuration file. The types differ in name only. The formatting of the files’ content is
identical.
The general configuration file contains settings that are required by all phones in the
system.
The MAC-specific configuration file is a file that only a single phone can retrieve. The
MAC-specific configuration file name contains a phone’s MAC address and can only be
retrieved by the phone with a matching MAC address.
The filename formats for both files are:


General file: <model>.cfg , i.e “Temporis_IP150.cfg”
MAC-specific file: <model>_<MAC Address>.cfg
Both the general and MAC-specific files can contain any of the available configuration
settings. A setting can appear in the general configuration file or the unit configuration
file, or both files, or neither file. If a setting appears in both files, the setting that is read
last is the one that applies.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
81/106
When the phone fetches both a general and a MAC-specific configuration file, the general
file is processed first. You can configure a setting for most of your phones in the general
file, and then overwrite that setting for just a few phones using the MAC-specific file.
Data Files
The configuration file can also include links to data files other than firmware for product
customization.
Link to firmware file is included in the “provisioning” module, and described in Firmware
Update section.
Other allowed data types include the following:
 Directory (contacts, blacklist) in xml format
 Certificates (server, provisioning, LDAP, Broadsoft) in pem format
 Audio profile in xml format
Links to data files are in the configuration file’s “file” module. This is where you enter any
URLs to the data files you require.
NOTE: The audio profile file is already in place and should only be customized for
localization purposes, according to internationally accepted guidelines.
None of these settings are exported when you export a configuration file from the phone.
However, you can export a Directory or Blacklist .xml file using the WebUI. After
modifying the .xml file, you can use the configuration file “file” module to have the phone
import the new file. For a complete list of data file parameters, see
“file” Module: Imported File Settings.
Configuration File Guide
All configuration settings are initially stored in a configuration template file. Copy,
rename, and edit the template file to create a general configuration file and the MACspecific configuration files you will need. You can store the general configuration file and
the MAC-specific files on your provisioning server.
Do not modify the header line that includes the model and firmware version.
To save yourself time and effort, consider which settings will be common to all (or the
majority of) phones. Such settings might include Call settings, language, and
programmable feature key settings. You can then edit those settings in the configuration
template and save it as the general configuration file. The remaining settings will make
up the MAC-specific configuration file, which you will have to copy and edit for each
phone.
Guidelines for the MAC-Specific Configuration File
The phone downloads the MAC-specific configuration file after the Main configuration file.
You must create a unit-specific configuration file for each phone in your system. The file
name must contain the phone’s MAC address, which is printed on a label on the back of
the phone, or available on the MENU > Status > Product Info screen. For example, a
phone with the MAC address of 74:65:D1:16:12:34 would download the Temporis_
IP150_7465D1161234.cfg file.
The MAC-specific configuration file contains settings intended exclusively for that phone.
Such settings will include SIP account settings such as display name, user ID,
authentication ID, and voicemail mailbox ID.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
82/106
Securing Configuration Files with AES Encryption
You can encrypt your configuration files to prevent unauthorized users modifying the
configuration files. The system encrypts files using the AES 256 algorithm. After
encrypting a file and placing it on your provisioning server, you can enable the phone to
decrypt the file after fetching it from the server.
To decrypt a configuration file you will need a 16-character AES key that you specified
when you encrypted the file. The key (or passphrase) is limited to 16 characters and
supports special characters ~^`%!&-_+=|.@*:;,?()[]{}<>/\# as well as spaces.
Note: The encryption of configuration files is supported only for the auto provisioning
process. Encrypt files only if you intend to store them on a provisioning server. Do not
encrypt files that you intend to manually import to the phone. You cannot enable
decryption for manually imported configuration files.
To encrypt a configuration file:
You can use for example an open source tool such as Openssl, which can be downloaded
from the Openssl project site. If this is the case, proceed as follows.
1. (Optional) Place your configuration file in the same folder as the openssl.exe file. If
the configuration file is not in the same folder as the openssl.exe file, you can enter a
relative pathname for the [infile] in the next step.
2. On the openssl command line, type:
enc -aes-256-cbc -pass pass:[passphrase123456] -in [infile] -out [outfile] -nosalt -p
Elements in brackets are examples—do not enter the brackets. Enter a 16-character
passphrase and the unencrypted configuration file filename (the “infile”) and a name for
the encrypted file (“outfile”) that will result.
To enable configuration file decryption via WUI:
Temporis IP150 Administration and Provisioning Guide
ed 0.1
83/106
1. On the WebUI, click Servicing > Provisioning.
2. On the Provisioning page under Resynchronization, select Use Encryption for
configuration file.
3. Enter the 16-character passphrase that you created when you encrypted the
configuration file.
4. Click Save.
Note: You must ensure that configuration files are encrypted when enabling AES
Encryption. Decrypting an unencrypted file will result in a garbage file that is not
processed. This will also be logged as an error in the system log.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
84/106
Setting Up Provisioning
Set up your provisioning server and folders for provisioning files. The general and unit
configuration files should be in the same folder. Note the IP address, username and
password for access to the folder on the provisioning server.
The Provisioning Server Settings will enable the phone to find the general configuration
file. In most cases, default settings will make automatic provisioning possible out of the
box without any further action on the phone.
The phone will try first to retrieve configuration files location from the different DHCP
options, according to their priority. Options 66, 159 and 160 are supported, and either
http, https or tftp urls are accepted here.
If the phone does not succeed to find its configuration files in the urls provided in those
options, then the Server provisioning string will be used. The default value for this server
again allows plug and play automatic provisioning. Check with your distributor to find out
how to benefit from APRT service.
If none of these default settings suit your environment, you may have to fill in the server
type and address (including a full path to the general configuration file), port, username
and password.
Note you can modify Provisioning Server Settings via configuration files; so you could use
default settings to perform a first provisioning which rewrites these values to suit your
production needs.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
85/106
Specifications
Operating temperature
(-5°–45°C)
AC adapter output voltage
5 Vdc @ 700mA
Ethernet network ports
10/100 Mbps RJ-45 Ports
Soft Keys
The table below provides an alphabetical list of the labels that appear above the deskset
soft keys.
Label
Description
abc/ABC/123
Selects the text format for input
Add
Displays the new directory group editor
Add dot
Enters dot in IP editing field
Answer
Answers an incoming call
Back
Backspc
Blind
Bridge
Callback
Cancel
Conf.
ConfCall
Shows the previous screen
Moves cursor back to correct entries in text editing fields
Starts the blind transfer process for the active call
Joins the two active calls in a conference and returns to idle screen
Dials the last missed caller
Quits the current page without saving any settings
Opens the live dialing editor to enter or insert digits for the conference
target. Also finally sets up the conference.
Displays a list of held calls as a target for conferencing with the active call
Del. All
Deletes all records in a list
Delete
1) Deletes current entry 2) Deletes assignment 3) Deletes Directory
group
Dial
Sends and dials currently displayed/highlighted digits
Dir
Changes the speed dial directory source
Directory
Edit
EditDial
Opens the list of available directories
Go to entry/group editor
Edits a number stored in a list before dialing
Temporis IP150 Administration and Provisioning Guide
ed 0.1
86/106
End
1) Closes the current page 2) Ends the current call
Exit
Exits the current screen and returns to the previous menu
Filter
Sorts the directory by all entries, blocked, or non-blocked numbers
FirstNme
Sorts the directory by first name
Forward
Opens the predial editor to begin forwarding a call
Insert
LastNme
Inserts a number from the directory/call history to a live dialing screen
Sorts the directory by last name
Line
Switches between registered lines
New
Press to predial a new call during a call currently put on hold
No
Returns to the previous screen
Quickdial
Access the quickdial list
Reject
Rejects an incoming call
Resume
Save
Resumes a call put on hold
1) Saves current setting 2) Begins save process
Search
Opens the Directory search editor
Select
Selects a highlighted option
Send
Settings
Silence
Split
Status
Transfer
Sends the digits entered
Opens the User settings menu
1) Silences ringer 2) Stops current call screening 3) Silences chime tone
Breaks a conference or call progress into multiple calls
Access the status submenu
Opens the live dialing editor to enter or insert digits of the transfer
target. It also finally sets up a transfer.
Type
Switches between the Directory number types within an entry
View
Displays a database/list
XferCall
Yes
Displays a list of held calls as a transfer target for the active call
Confirm
Temporis IP150 Administration and Provisioning Guide
ed 0.1
87/106
Appendix A: Configuration File Settings
This section lists the available options for all the settings within the configuration file.
Most settings in the configuration file have an equivalent in the WebUI (see the settings
tables in Using the WebUI). Some parameters are not available on the WUI, and in
others the syntax is different as already documented in previous sections.
The settings are divided into modules. Each module loosely corresponds to a page on the
WebUI. You may wish to reorganize the modules within the configuration file itself. The
configuration file settings can be listed in any order, and the configuration file will still be
valid.
Module names include sip_account, network, provisioning, time_date, log, remoteDir,
web, user_pref, call_settings, pfk, memory_key, ringersetting, tone, profile and file.
Descriptions of each module appear in their own sections in this appendix.
“sip_account” Module: SIP Account Settings
The SIP Account settings enable you to set up individual accounts for each user. You can
add up to three accounts for each phone. Each account requires you to configure the
same settings. The SIP account settings for each account would be identified by their
own account number, from 1 to 2.
For example, for account 1 you would set:
sip_account.1.sip_account_enable = 1
sip_account.1.display_name = 1001
sip_account.1.user_id = 2325551001
and so on.
For account 2, you would set:
sip_account.2.sip_account_enable = 1
sip_account.2.display_name = 1002
sip_account.2.user_id = 2325551002
and so on.
The SIP account settings follow the format: sip_account.x.[element], where x is an
account number ranging from 1 to 2.
All these settings except authentication password are exported when you manually
export the configuration from the phone.
Setting
Range
Default
sip_account.x.sip_account_enable
0, 1
0
sip_account.x.display_name
Text string
Blank
sip_account.x.user_id
Text string
Blank
sip_account.x.authentication_name
Text string
Blank
sip_account.x.authentication_password
Text string
Blank
Text string
X+P
1-10
3
sip_account.x.dial_plan
sip_account.x.inter_digit_timeout
Temporis IP150 Administration and Provisioning Guide
Description
See Dial plan
section
ed 0.1
88/106
sip_account.x.maximum_call_number
1–6
6
sip_account.x.shared_line_enable
0, 1
0
sip_account.x.barge_in_enable
0, 1
0
sip_account.x.auto_answer_enable
0, 1
0
sip_account.x.feature_sync_enable
0, 1
0
sip_account.x.music_on_hold_enable
0, 1
1
sip_account.x.mwi_enable
0, 1
0
sip_account.x.mwi_ignore_unsolicited
0, 1
0
sip_account.x.mwi_uri
sip uri
Blank
sip_account.x.mwi_subscription_expires
0–65535
3600
sip_account.x.stutter_dial_tone_enable
0, 1
1
sip_account.x.voice_encryption_enable
0, 1
0
sip_account.x.primary_sip_server_port
0–65535
5060
sip_account.x.primary_sip_server_address
IPv4 or fqdn
Blank
sip_account.x.primary_outbound_proxy_server_port
0–65535
5060
sip_account.x.primary_outbound_proxy_server_address
IPv4 or fqdn
Blank
sip_account.x.primary_registration_server_port
0–65535
5060
sip_account.x.primary_registration_server_address
IPv4 or fqdn
Blank
sip_account.x.primary_registration_expires
0–65535
3600
sip_account.x.access_code_page
Text string
Blank
sip_account.x.access_code_park_call
Text string
Blank
sip_account.x.access_code_retrieve_parked_call
Text string
Blank
sip_account.x.access_code_retrieve_voicemail
Text string
Blank
sip_account.x.access_code_dnd_on
Text string
Blank
sip_account.x.access_code_dnd_off
Text string
Blank
sip_account.x.access_code_cfa_on
Text string
Blank
sip_account.x.access_code_cfa_off
Text string
Blank
sip_account.x.access_code_cfna_on
Text string
Blank
sip_account.x.access_code_cfna_off
Text string
Blank
Temporis IP150 Administration and Provisioning Guide
ed 0.1
89/106
sip_account.x.access_code_cfb_on
Text string
Blank
sip_account.x.access_code_cfb_off
Text string
Blank
sip_account.x.access_code_anonymous_call_block_on
Text string
Blank
sip_account.x.access_code_anonymous_call_block_off
Text string
Blank
sip_account.x.access_code_outgoing_call_anonymous_on
Text string
Blank
sip_account.x.access_code_outgoing_call_anonymous_off
Text string
Blank
sip_account.x.access_code_call_waiting_on
Text string
Blank
sip_account.x.access_code_call_waiting_off
Text string
Blank
sip_account.x.access_code_group_call_pickup
Text string
Blank
sip_account.x.access_code_direct_call_pickup
Text string
Blank
sip_account.x.blf_list_uri
Sip uri
Blank
sip_account.x.blf_remote_pickup_code
Text string
Blank
sip_account.x.nat_traversal_stun_enable
0, 1
0
sip_account.x.nat_traversal_stun_server_port
0-65535
3478
sip_account.x.nat_traversal_stun_server_address
IPv4 or fqdn
Blank
sip_account.x.nat_traversal_udp_keep_alive_enable
0, 1
0
sip_account.x.nat_traversal_udp_keep_alive_interval
0–65535
30
sip_account.x.network_conference_enable
0, 1
0
sip_account.x.network_bridge_uri
sip uri
Blank
sip_account.x.sip_session_timer_enable
0, 1
0
sip_account.x.sip_session_timer_min
90–65535
90
sip_account.x.sip_session_timer_max
0–65535
1800
auto,
rfc2832, inband, infomethod
auto
sip_account.x.codec_priority.1
G.711a,
G.711u,
G.729, G.726,
G.722
G.711u
sip_account.x.codec_priority.2
Auto, G.711a,
G.711u,
G.729, G.726,
G.722
G.711a
sip_account.x.dtmf_transport_method
Temporis IP150 Administration and Provisioning Guide
Sets the
transport
method for
DTMF
signalling.
ed 0.1
90/106
sip_account.x.codec_priority.3
Auto, G.711a,
G.711u,
G.729, G.726,
G.722
G.729
sip_account.x.codec_priority.4
Auto, G.711a,
G.711u,
G.729, G.726,
G.722
G.726
sip_account.x.codec_priority.5
Auto, G.711a,
G.711u,
G.729, G.726,
G.722
G.722
sip_account.x.blf.subscription_expires
15-65535
3600
sip_account.x.unregister_after_reboot_enable
Unregister
after reboot
enable
0, 1
0
sip_account.x.transport_mode
Signalling
Transport
Mode
“udp”, “tcp”,
“tls”
“udp”
sip_account.x.backup_outbound_proxy_server_port
0-65535
5060
sip_account.x.backup_outbound_proxy_server_address
IPv4 or fqdn
Blank
0-65535
Line 1:
5060
sip_account.x.local_sip_port
Local SIP port
Line 2:
5070
sip_account.x.dscp
Voice Quality
of Service
Layer 3 –
DSCP
6-bit value
46
sip_account.x.sip_dscp
Signalling
Quality of
Service Layer
3 – DSCP
6-bit value
26
1–1800
10
sip_account.x.registration_retry_time
sip_account.x.check_trusted_certificate
See
Certificates
section
0,1
0
sip_account.use_first_trusted_certificate_for_all
See
Certificates
section
0,1
0
“network” Module: Network Settings
The network settings follow the format: network.[element].
These settings can be exported when you manually export the configuration from the
phone, except for the settings shaded in gray in the table.
Setting
Description
Range
Default
network.ip.dhcp_enable
Indicates whether DHCP is enabled
0, 1
1
network.ip.dns1
Primary DNS server address
IPv4
blank
network.ip.dns2
Secondary DNS server address
IPv4
blank
Temporis IP150 Administration and Provisioning Guide
ed 0.1
91/106
network.ip.static_ip_addr
Static IP address
IPv4
blank
network.ip.subnet_mask
Subnet mask
IPv4
blank
network.ip.gateway_addr
Gateway IP address
IPv4
blank
network.nat.masquerading_enable
Enable IP masquerading
0, 1
0
network.nat.public_ip_addr
Public IP address
IPv4
blank
network.nat.public_sip_port
Public SIP port
0-65535
5060
network.nat.public_rtp_port_start
Public RTP port start
0-65535
18000
network.nat.public_rtp_port_end
Public RTP port end
0-65535
19000
network.vlan.wan.enable
Enable vlan on WAN port
0, 1
0
network.vlan.wan.id
WAN port VID
0-4095
0
network.vlan.wan.priority
WAN vlan port priority
0-7
0
network.vlan.pc.enable
Enable vlan on PC port
0, 1
0
network.vlan.pc.id
PC port VID
0-4095
0
network.vlan.pc.priority
PC vlan port priority
0-7
0
network.rtp.port_start
Local RTP port range start
0-65535
18000
network.rtp.port_end
Local RTP port range end
0-65535
19000
network.lldp_med.enable
LLDP-MED enable
0, 1
0
network.lldp_med.interval
LLDP-MED packet interval
(seconds)
1-30
30
network.eapol.enable
802-1x EAPOL enable
0, 1
0
network.eapol.identity
802-1x EAPOL identity
string
blank
network.eapol.password
802-1x EAPOL MD5 password
string
blank
network.vendor_class_id
Vendor Class ID (DHCP option 60)
string
Alcatel
Temporis
IP150
network.user_class
User Class (DHCP option 77)
string
Alcatel
Temporis
IP150
“profile” Module: security settings
The profile settings follow the format: profile.[element].
These settings are not exported when you manually export the configuration from the
phone.
Setting
Description
Range
Default
profile.admin.password
Password for admin
string
admin
profile.user.password
Password for user
string
user
Temporis IP150 Administration and Provisioning Guide
ed 0.1
92/106
“provisioning” Module: Provisioning Settings
The provisioning settings follow the format: provisioning.[element].
All these settings are exported when you manually export the configuration from the
phone.
Setting
Description
Range
Default
provisioning.bootup_check_enable
Enable bootup check
0, 1
1
provisioning.crypto_enable
Enable cryptography
0, 1
0
provisioning.crypto_passphrase
Passphrase to
decode encrypted
config file
string
Blank
provisioning.dhcp_option_enable
Enable DHCP option
0, 1
1
provisioning.dhcp_option_priority_1
DHCP option
priority 1
0, 66, 159, 160
66
provisioning.dhcp_option_priority_2
DHCP option
priority 2
0, 66, 159, 160
159
provisioning.dhcp_option_priority_3
DHCP option
priority 3
0, 66, 159, 160
160
provisioning.firmware_url
Firmware URL
string
Blank
provisioning.fw_server_username
Authentication
username for
firmware download
String
Blank
provisioning.fw_server_password
Authentication
password for
firmware download
string
Blank
provisioning.resync_mode
Resync mode
config_only,
firmware_only,
config_and_firm
ware
config_and_firmw
are
provisioning.resync_time
Minutes between
checks for new
firmware and/or
configuration file
0–65535
0
provisioning.server_address
Server address for
configuration
download
string
https://art.atli
nks.com
provisioning.server_username
Authentication
username for
configuration
download
string
blank
provisioning.server_password
Authentication
password for
configuration
download
string
blank
provisioning.remote_check_sync_enab
le
Enable provisioning
start via NOTIFY
check-sync
0,1
1
Temporis IP150 Administration and Provisioning Guide
ed 0.1
93/106
provisioning.click_to_dial
Enable click-todial from WUI
contacts page
0,1
1
provisioning.check_trusted_certific
ate
Require trusted
certificate for
https provisioning
0,1
0
“ringersetting” Module: distinctive ringing settings
The distinctive ringing settings follow the format: ringersetting.[element].
All these settings are exported when you manually export the configuration from the
phone.
Setting
Description
Range
Default
ringersetting.x.ringer_text
Content of the
“info” field in
the Alert-info
header to match
for distinctive
ringing for
element “x”.
Text string
blank
1-10
1
See Ringer
Settings section
ringersetting.x.ringer_type
Ringer tone to
use when there is
a match with
ringer_text
“time_date” Module: Time and Date Settings
The time and date settings follow the format: time_date.[element].
All these settings are exported when you manually export the configuration from the
phone.
Setting
Description
Range
Default
time_date.date_format
Format for
displaying the
date
DD/MM/YY,
MM/DD/YY,
YY/MM/DD
DD/MM/YY
time_date.24hr_clock
Enable 24-hour
clock format
0, 1
1
time_date.ntp_dhcp_option
Enable NTP server
DHCP option (opt
42)
0, 1
0
time_date.ntp_server
Enable NTP server
0, 1
1
time_date.ntp_server_addr
Address of NTP
server
IPv4 or fqdn
europe.pool.ntp
.org
time_date.ntp_server_update_interval
Delay between NTP
server updates, in
seconds
0 4294967295
1000
time_date.timezone_dhcp_option
Enable time zone
0, 1
0
Temporis IP150 Administration and Provisioning Guide
ed 0.1
94/106
DHCP option
(2/100/101)
time_date.timezone_offset
Time zone offset,
in seconds
-2147483647
to
2147483647
-480
time_date.daylight_saving
Enable daylight
savings auto
adjust
0, 1
1
time_date.selected_timezone
Set time zone
Please see
Appendix B
Europe/Paris
time_date.daylight_saving_auto_adjus
t
0,1
1
time_date.daylight_saving_user_defin
ed
0, 1
0
time_date.daylight_saving_start_mont
h
January –
December
March
time_date.daylight_saving_start_week
1-5
2
time_date.daylight_saving_start_day
"Sunday",
"Monday",
"Tuesday",
"Wednesday",
"Thursday",
"Friday",
"Saturday"
Sunday
time_date.daylight_saving_start_hour
00:00 -23:00
02:00
time_date.daylight_saving_end_month
"January",
"February",
"March",
"April",
"May",
"June",
"July",
"August",
"September",
"October",
"November",
"December"
Sunday
time_date.daylight_saving_end_week
1-5
time_date.daylight_saving_end_day
"Sunday",
"Monday",
"Tuesday",
"Wednesday",
"Thursday",
"Friday",
"Saturday"
time_date.daylight_saving_end_hour
00:00 -23:00
02:00
0–255
60
time_date.daylight_saving_amount
DST offset in
minutes
“log” Module: Log Settings
The log settings control system logging activities.
The log settings follow the format: log.element.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
95/106
These settings can be exported when you manually export the configuration from the
phone.
Setting
Description
Range
Default
log.syslog_enable
Enable log output to syslog
server
0, 1
0
log.syslog_server_address
Syslog server IP address
IPv4
blank
log.syslog_server_port
Syslog server port
0-65535
514
log.syslog_level
Log level. The higher the
level, the larger the debug
output.
0-5
2
5-all
4-debug
3-info
2-warning
1-error
0-critical
“remoteDir” Module: Remote Directory Settings
The remote directory settings follow the format: remoteDir.element.
All these settings are exported when you manually export the configuration from the
phone.
Setting
Description
Range
Default
remoteDir.ldap_enable
Enable/disable LDAP
0,1
0
remoteDir.ldap_directory_name
LDAP directory name
String
Blank
remoteDir.ldap_number_filter
LDAP number filter
String
Blank
remoteDir.ldap_firstname_filter
LDAP first name filter
String
Blank
remoteDir.ldap_lastname_filter
LDAP last name filter
String
Blank
remoteDir.ldap_server_address
LDAP server address
IPv4 or fqdn
blank
remoteDir.ldap_port
LDAP server port
0-65535
389
remoteDir.ldap_authentication_type
LDAP authentication type
simple, ssl
simple
remoteDir.ldap_base
LDAP base
String
Blank
remoteDir.ldap_user_name
LDAP user name
String
Blank
remoteDir.ldap_password
LDAP password
String
Blank
remoteDir.ldap_max_hits
LDAP maximum hits
0-65535
200
remoteDir.ldap_firstname_attribute
LDAP first name
attribute
String
Blank
remoteDir.ldap_lastname_attribute
LDAP last name attribute
String
Blank
remoteDir.ldap_work_number_attributes
LDAP work number
attributes
String
Blank
Temporis IP150 Administration and Provisioning Guide
ed 0.1
96/106
remoteDir.ldap_mobile_number_attributes
LDAP mobile number
attributes
String
Blank
remoteDir.ldap_home_number_attributes
LDAP home number
attributes
String
Blank
remoteDir.ldap_protocol_version
LDAP protocol version
version_2,
version_3
version_3
remoteDir.ldap_search_delay
LDAP search delay
0-500
0
remoteDir.ldap_incall_lookup_enable
LDAP incoming call
lookup
0,1
0
remoteDir.ldap_outcall_lookup_enable
LDAP outgoing call
lookup
0,1
0
remoteDir.ldap_check_certificate
Require certificate for
ssl LDAP
0,1
0
remoteDir.broadsoft_enable
Enable/disable Broadsoft
directory
0,1
0
remoteDir.broadsoft_item
Broadsoft item
item_1,
item_2,
item_6
item_1
remoteDir.broadsoft_display_name
Broadsoft display name
String
Blank
remoteDir.broadsoft_server
Broadsoft server
IPv4 or fqdn
Blank
remoteDir.broadsoft_port
Broadsoft server port
0-65535
0
remoteDir.broadsoft_user_name
Broadsoft user name
String
Blank
remoteDir.broadsoft_password
Broadsoft password
String
Blank
remoteDir.broadsoft_check_certificate
Require certificate for
ssl Broadsoft
0,1
0
“web” Module: Web Settings
The web settings control the web server IP, port, and security settings.
The web settings follow the format: web.element.
These settings can be exported when you manually export the configuration from the
phone, except for the settings shaded in gray in the table.
Setting
Description
Range
Default
web.http_port
Sets the http port for the
embedded web server
0-65535
80
web.https_port
Sets the https port when https is
enabled
0-65535
443
web.https_enable
Sets embedded web server to use
the https protocol.
0, 1
0
Temporis IP150 Administration and Provisioning Guide
ed 0.1
97/106
“user_pref” Module: User Preference Settings
The user settings are accessible to the phone user. These settings are useful for initial
setup. You may wish to remove these settings from auto-provisioning update files so that
users do not have their own settings overwritten.
The user preference settings follow the format: user_pref.element.
All these settings are exported when you manually export the configuration from the
phone.
Setting
Description
Range
Default
user_pref.language
User phone MI
language
en, es, fr, de,
it, pt, nl
en
user_pref.web_language
WUI language
en, es, fr, de,
it, pt, nl
en
user_pref.lcd_contrast
LCD contrast
1-7
4
user_pref.backlight
Backlight level in
non idle mode
0,1
1
user_pref.idle_backlight
Idle backlight
level
0,1
0
user_pref.backlight_timeout
Backlight timeout
in seconds
10-60
30
user_pref.absent_timeout
Timeout(sec.)
after which live
dial will return
to idle without
additional dialing
digits
10-60
30
user_pref.account.x.ringer
Ringer tone for
account x, where x
can be 1 or 2
1-10
1
user_pref.ringer_volume
Ringer volume
0-9 (0 is off)
5
user_pref.speaker_volume
Speaker volume
0-9 (0 is off)
5
user_pref.headset_volume
Cordless headset
volume
0-9 (0 is off)
5
user_pref.handset_volume
Corded handset
volume
0-9 (0 is off)
5
user_pref.audio_mode
Default audio mode
speaker,headset
speaker
user_pref.key_beep_enable
Enable/disable key
beeps
0, 1
1
user_pref.hold_reminder.enable
Enable/disable
hold reminder
0, 1
1
user_pref.hold_reminder.interval
Hold reminder
interval in
seconds
10-300
30
user_pref.call_waiting.mode
Call waiting mode
enable, reject
enable
user_pref.call_waiting.tone_enable
Enable/disable
0, 1
1
Temporis IP150 Administration and Provisioning Guide
ed 0.1
98/106
call waiting tone
user_pref.call_waiting.tone_interval
Call waiting tone
interval in
seconds
10-60
30
“call_settings” Module: Call Settings
The call settings configure data related to a user’s call preferences.
All the call settings (except one) follow the format: call_settings.account.x.[element]
where x is an account number ranging from 1 to 2.
Setting
Description
Range
Default
call_settings.account.x.block_anonymous_enable
Enable/disable
anonymous call
blocking
0, 1
0
call_settings.account.x.outgoing_anonymous_enable
Enable/disable
outgoing anonymous
calls
0, 1
0
call_settings.account.x.dnd_enable
Enable/disable Do
Not Disturb
0, 1
0
call_settings.account.x.dnd_incoming_calls
Show or reject
incoming calls if
DND is on
show,
reject
reject
call_settings.account.x.call_fwd_always_enable
Enable/disable call
forward always
0, 1
0
call_settings.account.x.call_fwd_always_target
Target number for
call forward always
String
Blank
call_settings.account.x.call_fwd_busy_enable
Enable/disable call
forward busy
0, 1
0
call_settings.account.x.call_fwd_busy_target
Target number for
call forward busy
String
Blank
call_settings.account.x.cfna_enable
Enable/disable call
forward no answer
0, 1
0
call_settings.account.x.cfna_target
Target number for
call forward no
answer
String
Blank
call_settings.account.x.cfna_delay
Delay (in # of
rings) before call
is forwarded
1-10
6
call_settings.missed_call_alert_enable
Enable/disable
missed call alert
0, 1
1
Temporis IP150 Administration and Provisioning Guide
ed 0.1
99/106
“pfk” Module: Programmable Feature Key Settings
The programmable feature key (PFK) settings store the data associated with each
programmable feature key.
The programmable feature key settings follow the format: pfk.x.[element], where x is
the programmable feature key ID, ranging from 1 to 20.
Setting
Description
Range
Default
pfk.x.feature
Assigns a feature to the
PFK
pfk 1-4, 11-14:
unassigned, line,
dir, call log, redial,
messages, dnd, cfwd
all, cfwd busy, cfwd
no answer, park call,
retrieve parked call,
quick dial, busy lamp
field, page, in call
dtmf, callback, group
call pickup, direct
call pickup
See
Programmable
Keys on page 7.
pfk 5: unassigned,
line, dir, call log,
redial, messages, dnd,
cfwd all, cfwd busy,
cfwd no answer, park
call, retrieve parked
call, quick dial, busy
lamp field, page, in
call dtmf, callback,
group call pickup,
direct call pickup,
lower
pfk 6-10, 16-20:
unassigned, dir, call
log, redial, messages,
dnd, cfwd all, cfwd
busy, cfwd no answer,
park call, retrieve
parked call, quick
dial, page, in call
dtmf, callback, group
call pickup, direct
call pickup
pfk 15: lower
pfk.x.account_number
SIP account used for the
assigned feature (if
applicable)
1-2
1
pfk.x.quick_dial
Quick dial string to use
if quick dial is assigned
to PFK
sip uri
Blank
pfk.x.blf
BLF string to use if Busy
Lamp Field is assigned to
PFK
sip uri
Blank
pfk.x.incall_dtmf
DTMF string if in-call
dtmf is assigned to pfk.
DTMF digits
Blank
“memory_key” Module: Speed Dial Settings
The memory key settings configure the dial pad keys for speed dialing pre-programmed
phone numbers. When configured, the phone user can press and hold a dial pad key to
dial a programmed phone number.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
100/106
The memory key settings follow the format memory_key.x.[element], where x is the dial
pad key, ranging from 1 to 0 (with 0 being the “0” key in your dial pad).
Setting
Description
Range
Default
memory_key.x.number
Phone number that the memory key will dial
when pressed and held.
String
blank
memory_key.x.name
Name associated to this memory key.
String
blank
memory_key.x.account
SIP account (line) used for dialing when
memory key x is pressed and held.
1-2
1
“file” Module: Imported File Settings
The “file” parameters enable the provisioning file to import additional configuration files
of various types, including:



Audio profile
Contact lists
Security certificates
File parameter values are URLs that direct the phone to the location of the file to be
imported.
None of these settings are exported when you manually export the configuration from
the phone.
Setting
Description
file.audio_profile
URL of Audio Profile to be imported.
file.contact.directory.append
URL of xml contact directory to be appended to
existing contacts.
file.contact.directory.overwrite
URL of xml contact directory to be imported which
will overwrite any existing contacts.
file.contact.blacklist.append
URL of xml contact blacklist to be appended to
existing black list.
file.contact.blacklist.overwrite
URL of xml contact blacklist to be imported and
will overwrite existing black list.
file.sips.trusted.certificate.x
URL of SIPS certificate to be imported for TLS
transport on account x.
file.https_user.certificate
URL of HTTPS certificate to be imported.
file.provisioning.trusted.certificate
URL of certificate to be imported for secure
provisioning
file.ldap.trusted.certificate
URL of certificate to be imported for secure LDAP
file.broadsoft.trusted.certificate
URL of certificate to be imported for secure
Broadsoft directory
Temporis IP150 Administration and Provisioning Guide
ed 0.1
101/106
“tone” Module: Tone Definition Settings
The Tone Definition settings configure data for various tones for the purpose of
localization. The Audio Manager component uses the data from this model to populate
the mcu on bootup.
The tone definition settings follow the format: tone.element.x, where x is the index of the
elements, ranging from 1 to 5.
Each definition (or tone element) must be a string of 12 elements separated by a space:
"<num of freq> <freq1> <amp1> <freq2> <amp2> <freq3> <amp3> <freq4> <amp4> <on duration> <off
duration> <repeat count>"
Where:
<num of freq>: 0–4
<freq1>: 0–65535
<amp1>: -32768–32767
<freq2>: 0-65535
<amp2>: -32768-32767
<freq3>: 0-65535
<amp3>: -32768-32767
<freq4>: 0-65535
<amp4>: -32768-32767
<on duration>: 0-2^32
<off duration>: 0-2^32
<repeat count>: 0-65535
All these settings are exported when you manually export the configuration from the
phone.
Setting
Description
Default
tone.call_waiting_tone.num_of_elements
1
tone.call_waiting_tone.element.1
"1 440 -120 0 0 0 0 0 0 500 0
1"
tone.call_waiting_tone.element.[2-5]
blank
tone.hold_reminder.num_of_elements
1
tone.hold_reminder.element.1
"1 770 -120 0 0 0 0 0 0 300 0
1"
tone.hold_reminder.element.[2-5]
blank
tone.inside_dial_tone.num_of_elements
1
tone.inside_dial_tone.element.1
"2 440 -180 350 -180 0 0 0 0
4294967295 0 65535"
tone.inside_dial_tone.element.[2-5]
blank
tone.stutter_dial_tone.num_of_elements
2
tone.stutter_dial_tone.element.1
"2 440 -180 350 -180 0 0 0 0
100 100 10"
tone.stutter_dial_tone.element.2
"2 440 -180 350 -180 0 0 0 0
4294967295 0 65535"
Temporis IP150 Administration and Provisioning Guide
ed 0.1
102/106
tone.stutter_dial_tone.element.[3-5]
blank
tone.busy_tone.num_of_elements
1
tone.busy_tone.element.1
"2 480 -180 620 -180 0 0 0 0
500 500 65535"
tone.busy_tone.element.[2-5]
blank
tone.ring_back_tone.num_of_elements
1
tone.ring_back_tone.element.1
"2 440 -180 480 -180 0 0 0 0
2000 4000 65535"
tone.ring_back_tone.element.[2-5]
blank
Appendix B: Time Zones
Temporis IP150 Administration and Provisioning Guide
ed 0.1
103/106
Maintenance
Taking care of your telephone




Your telephone contains sophisticated electronic parts, so you must treat it with
care.
Avoid rough treatment.
Place the corded handset down gently.
Save the original packing materials to protect your telephone base if you ever
need to ship it.
Avoid water

You can damage your telephone if it gets wet. Do not use the corded handset in
the rain, or handle it with wet hands. Do not install the telephone near a sink,
bathtub or shower.
Electrical storms

Electrical storms can sometimes cause power surges harmful to electronic
equipment. For your own safety, take caution when using electric appliances
during storms.
Cleaning your telephone


Your telephone has a durable plastic casing that should retain its luster for many
years. Clean it only with a soft cloth slightly dampened with water or a mild soap.
Do not use excess water or cleaning solvents of any kind.
Remember that electrical appliances can cause serious injury if used when you are wet or
standing in water. If the telephone should fall into water, DO NOT RETRIEVE IT UNTIL
YOU UNPLUG THE POWER CORD AND NETWORK CABLE FROM THE WALL, then pull the
unit out by the unplugged cords.
Temporis IP150 Administration and Provisioning Guide
ed 0.1
104/106
Important Safety Information
This symbol is to alert you to important operating or servicing
instructions that may appear in this user’s manual. Always follow basic
safety precautions when using this product to reduce the risk of injury,
fire, or electric shock.







Read and understand all instructions in the user’s manual. Observe all markings
on the product.
Avoid using a telephone during a thunderstorm. There may be a slight chance of
electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak. Under
certain circumstances, a spark may be created when the adapter is plugged into
the power outlet, or when the handset is replaced in its cradle. This is a common
event associated with the closing of any electrical circuit. The user should not plug
the phone into a power outlet, and should not put a charged handset into the
cradle, if the phone is located in an environment containing concentrations of
flammable or flame-supporting gases, unless there is adequate ventilation. A
spark in such an environment could create a fire or explosion. Such environments
might include: medical use of oxygen without adequate ventilation; industrial
gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc.
Do not use this product near water, or when you are wet. For example, do not use
it in a wet basement or shower, or next to a swimming pool, bathtub, kitchen
sink, or laundry tub. Do not use liquids or aerosol sprays for cleaning. If the
product comes in contact with any liquid, unplug any line or power cord
immediately. Do not plug the product back in until it has dried thoroughly.
Install this product in a protected location where no one can trip over any line or
power cords. Protect cords from damage or abrasion.
If this product does not operate normally, see the Troubleshooting section in your
product’s manual. If you cannot solve the problem, or if the product is damaged,
refer to the Limited warranty. Do not open this product except as directed in your
user’s manual. Opening the product or reassembling it incorrectly may expose you
to hazardous voltages or other risks.
This power adapter is intended to be correctly oriented in a vertical or floor mount
position. The prongs are not designed to hold the plug in place if it is plugged into
a ceiling, an under-the-table or cabinet outlet.
Caution: Use only the original power adapter for this product. To obtain
it, check with your authorized distributor or reseller.
SAVE THESE INSTRUCTIONS
Temporis IP150 Administration and Provisioning Guide
ed 0.1
105/106
CE Declaration of conformity
Hereby, it’s declared that this phone is in conformity with the essential
requirements and other relevant provisions of the CE. You can download
full declaration from www.alcatel-business.com
CE Mark Warning
This is a class B device, in a domestic environment; this product may cause radio
interference, in which case the user may be required to take adequate measures.
WEEE Warning
To avoid the potential effects on the environment and human health
as a result of the presence of hazardous substances in electrical and
electronic equipment, end users of electrical and electronic equipment
should understand the meaning of the crossed-out wheeled bin
symbol. Do not dispose of WEEE as unsorted municipal waste and
have to collect such WEEE separately.
European Warranty
GPL License Information
Portions of the software associated with this product are open source, and fall within the
scope of the GNU General Public License (GPL).
Temporis IP150 Administration and Provisioning Guide
ed 0.1
106/106