MDC 820DXn 700DXn 57..

SEC-VD-DSW Multiple Display Control
Multiple Display Control Protocol
for SyncMaster 820DXn 700DXn
570Dxn 460Dxn 460TXn 400DXn
Copyright © 2003 2007 Samsung Electronics Co., Ltd
Copyright notice
This document is Copyright ⓒ Samsung Electronics, Co. - all rights reserved.
「 This document is the technological property of Samsung Electronics Company and the copying
and/or use of this document without permission of the Tech Document Department are prohibited.」
Contact Information
Display S/W Group, VD Business Division
Samsung Electronics Co., Ltd
Address :
416, Maetan-3Dong, YoungTong-Gu,
Suwon City, Kyungki-Do, Korea
442-742
Telephone : 82-31-277-2348,2325,2343
E-mail
: jwon.park@samsung.com, ucroh@samsung.com, ys_nam@samsung.com
Author:: Display S/W2, Visual & Display Division.
History:
Version
Date
Content
Author
1.0
2007. 12. 10
Protocol for 400DXn, 460D(T)Xn,
570Dxn, 700Dxn, 820Dxn
Park Jong Won
Approved by
Table of Contents
1. Overview.......................................................................................... 6
1.1. Purpose................................................................................................... 6
1.2. Scope...................................................................................................... 6
1.3. Terms & Abbreviations.............................................................................. 6
2. API Function ................................................................................... 7
1) MLS_HAL_I2C_Start...................................................................................... 7
2) MLS_HAL_I2C_Stop...................................................................................... 7
3) MLS_HAL_I2C_Send..................................................................................... 7
3. Events from Library & Sample Code................................................... 9
1) Event from Library....................................................................................... 9
2) Volume Control in Application.......................................................................9
3) When the Application Receives the Current Volume Values........................... 10
4. Command....................................................................................... 11
4.1. Detailed Description of Commands...........................................................14
1) Status Control.............................................................................................. 14
2) Time Control................................................................................................ 15
3) On Time Control........................................................................................... 16
4) Off Time Control...........................................................................................17
5) Video Control (ATV, DTV, AV, S-Video, Component, HDMI Only)..................... 18
6) Audio Control............................................................................................... 19
7) RGB Control (PC, BNC, DVI, MagicNet Only)..................................................20
8) PIP Status Control........................................................................................ 21
9) Maintenance Control..................................................................................... 22
10) Display Status Control................................................................................. 23
11) SW Version Control..................................................................................... 24
12) Model Number Control.................................................................................25
13) Power Control............................................................................................. 26
14) Volume Control........................................................................................... 27
15) Mute Control...............................................................................................28
16) Input Source Control................................................................................... 29
17) Picture Size Control.................................................................................... 30
18) Direct Channel Control(ATV, DTV Only).........................................................31
19) Contrast Control (ATV, DTV, AV, S-Video, Component, HDMI Only)............... 32
20) Brightness Control (ATV, DTV, AV, S-Video, Component, HDMI Only).............33
21) Sharpness Control (ATV, DTV, AV, S-Video, Component, HDMI Only).............34
22) Color Control (ATV, DTV, AV, S-Video, Component, HDMI Only)....................35
23) Tint Control (ATV, DTV, AV, S-Video, Component, HDMI Only)...................... 36
24) Red Gain Control (PC, BNC, MagicNet Only)................................................ 37
25) Green Gain Control (PC, BNC, MagicNet Only)............................................. 38
26) Blue Gain Control (PC, BNC, MagicNet Only)................................................39
27) Treble Control............................................................................................. 40
28) Bass Control...............................................................................................41
29) Balance Control.......................................................................................... 42
30) Coarse Control (PC, BNC Only)................................................................... 43
31) Fine Control (PC, BNC Only)....................................................................... 44
32) H-Position Control (PC, BNC Only).............................................................. 45
33) V-Position Control (PC, BNC Only).............................................................. 46
34) Clear Menu Control..................................................................................... 47
35) Remote Control...........................................................................................48
36) RGB Contrast Control (PC, BNC, DVI, MagicNet Only)...................................49
37) RGB Brightness Control (PC, BNC, DVI, MagicNet Only)................................ 50
38) PIP On / Off Control...................................................................................51
39) Auto Adjustment Control (PC, BNC Only)......................................................52
40) Color Tone Control (ATV, DTV, AV, S-Video, Component, HDMI Only)........... 53
41) Color Temp Control.....................................................................................54
42) PIP Source Control .................................................................................... 55
43) Main-PIP Swap Control............................................................................... 56
44) PIP Size Control..........................................................................................57
45) PIP Locate Control...................................................................................... 58
46) Sound Select Control.................................................................................. 59
47) Auto Lamp Control...................................................................................... 60
48) Manual Lamp Control.................................................................................. 61
49) Safety Screen Control ................................................................................ 62
50) Video Wall Mode Control............................................................................. 63
51) Safety Lock................................................................................................ 64
52) Panel Lock................................................................................................. 65
53) OSD On/Off................................................................................................66
54) P.Mode Control........................................................................................... 67
55) S.Mode Control........................................................................................... 68
56) NR Mode Set (ATV, DTV, AV, S-Video, Component, HDMI Only)....................69
57) PC Color Tone Control (PC, BNC , DVI, MagicNet only)................................ 70
58) Auto AutoAdjustment................................................................................... 71
59) All Keys Lock..............................................................................................72
60) SRS TSXT Control....................................................................................... 73
61) Film Mode Control...................................................................................... 74
62) Signal Balance (PC,BNC Only)..................................................................... 75
63) SB Gain (PC,BNC Only)...............................................................................76
64) SB Sharpness (PC,BNC Only)...................................................................... 77
65) Panel On Time .......................................................................................... 78
66) Video Wall On.............................................................................................79
67) Temperature Control.................................................................................... 80
68) Brightness Sensor....................................................................................... 81
69) Dynamic Contrast(ATV, DTV, AV, S-Video, Component, HDMI Only)............... 82
70) Safety Screen On........................................................................................83
71) Video Wall Control...................................................................................... 84
72) Model Name Control....................................................................................85
73) MagicNet PIP (MagicNet Only)..................................................................... 86
74) Panel ON/OFF............................................................................................ 89
1. Overview
This document provides explanations of the MDC(Multiple Display Control) Protocols
using the networks.
1.1. Purpose
This document provides an explanation of the software architecture commands and the data required for
monitor control or status check. the network board utilizes Windows XPe which uses HAL API system.
This document is designed for the Windows XPe application software programmer , system software
engineer and tester (Programmer , Developer, Tester)
1.2. Scope
This document provides explanations of the protocols for network monitor control and status check. the
network board has installed Windows XPe application that includes access for monitor check and control
using the HAL API system. This document does not covers communications between the network board
HAL software and the main board firmware, and communications between the network board and the
server.
1.3. Terms & Abbreviations
MDC
Multiple Display Control
A Communications protocol is used to communications in this case between the
Protocol
network board HAL (Hardware Abstract Layer) and the Windows XPe Operating
system
HAL
Hardware Abstract Layer
API
Application Programming Interface
6
2. API Function
Explains the APIs required for transferring data to and from the application .
1) MLS_HAL_I2C_Start
● Protocol
DWORD MLS_HAL_I2C_Start(void)
● Parameter
None
● Return Value
FALSE : Failed to start communications.
TRUE : Communications started.
● Explanation
Starts communicating with the monitor. If you want to communicate with the monitor firmware, you should
perform this function first, or communicating will fail.
2) MLS_HAL_I2C_Stop
● Protocol
DWORD MLS_HAL_I2C_Stop(void)
● Parameter
None
● Return Value
FALSE : Terminating communications failed.
TRUE : Communications terminated.
● Explanation
Terminates communications with the monitor. If you want to end communicating with the moniter firmware,
you should perform this function.
3) MLS_HAL_I2C_Send
● Protocol
DWORD MLS_HAL_I2C_Send(UCHAR *lpBuff, UCHAR length)
● Parameter
UCHAR *lpBuff : Data transfer to the monitor firmware
UCHAR length : lpBuff data length
7
● Return Value
FALSE : Data transfer failed
TRUE : Data transferred
● Explanation
Transfers data to the monitor.
8
3. Events from Library & Sample Code
1) Event from Library
Library sends an event to the application when it receives data from the firmware. The event is a
Windows message,[::RegisterWindowMessage(_T("MSG_MDC_COMM"))]. However the application
should respond to this [::RegisterWindowMessage(_T("MSG_MDC_COMM"))].
Windows message before it can receive data from library.
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x12
Volume
3
Check
Sum
Library transfers commands and data lengths to WPARAM, a Windows message parameter. However ,
Library sends data lengths other than the Command (0xFF) to higher-byte WPRAMs and transfers them
other than the Check Sum to lower-byte WPRAMs.
Ack/Nak
Contents
0x00
NAK
0x01
ACK
☞ Note : For WPARAM commands of the [::RegisterWindowMessage(_T("MSG_MDC_COMM"))]
Windows Message, 0xFF is an MDC event while 0x11 is a remote control event for the monitor.
This document does not enter further into this as this belongs to MDC documentation. The remote
control signals are mentioned separately in our documents.
2) Volume Control in Application
The data format mentioned in '4.1 Detailed Description of Commands' below is as follows.
Command Data Length
0x12
1
Data 1
Volume
The application can only retrieve data that corresponds to the parameter.
● Sample Code
#define CMD_VOLUME
0x12
{
UCHAR SendBuff[3] = {0, 0, 0};
SendBuff[0] = CMD_VOLUME; //Volume Control Command
SendBuff[1] = 0x01; //Data Length
SendBuff[2] = data; //Volume Data
DWORD dRetSend = MLS_HAL_I2C_Send(SendBuff, 3);
}
9
3) When the Application Receives the Current Volume Values
For command explanations mentioned below, the data formats are as follows. Library receives data
in the formats described below.
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x12
Volume
3
Check
Sum
When library receives data from the firmware, it sends a Windows Message
[::RegisterWindowMessage(_T("MSG_MDC_COMM"))] for confirmation, and transfers commands and data
lengths to WPARAM, a Windows message parameter.
When the application receives the [::RegisterWindowMessage(_T("MSG_MDC_COMM"))] Windows Message
above, it can translate WPARAM and get the data that library received from the firmware.
● Sample Code
const UINT MDC_COMM_MSG = ::RegisterWindowMessage(_T("MSG_MDC_COMM"));
#define CMD_VOLMUE
0x12
WindowProc(UINT message, WPARAM wParam, LPARAM lParam)
{
if(message == MDC_COMM_MSG)//The Message that library receives data from the firmware
{
unsigned char* ReadBuff = (PUCHAR)wParam;
if(ReadBuff[0] == 0xFF)
//MDC Command
{
if((ReadBuff[2] == 0x01) // Replied data is ACK
{
if (ReadBuff[3] == CMD_VOLMUE) ) // Volume Data is received
ShowVolume(ReadBuff[4]);
}
}
10
4. Command
No
Type of Command
Command
Range of Value(Decimal)
1
Status Control
0x00
-
2
Time Control
0x01
-
3
On Time Control
0x02
-
4
Off Time Control
0x03
-
5
Video Control
0x04
-
6
Audio Control
0x05
-
7
RGB Control
0x06
-
8
PIP Status Control
0x07
-
9
Maintenance Control
0x08
-
10
Display Status Control
0x0D
11
SW Version Control
0x0E
12
Model Number Control
0x10
-
13
Power Control
0x11
0 ~ 1
14
Volume Control
0x12
0 ~ 100
15
Mute Control
0x13
0 ~ 1
16
Input Source Control
0x14
-
17
Image Size Control
0x15
-
18
Direct Channel Control
0x17
-
19
Contrast Control
0x24
0 ~ 100
20
Brightness Control
0x25
0 ~ 100
21
Sharpness Control
0x26
0 ~ 100
22
Color Control
0x27
0 ~ 100
23
Tint Control
0x28
0 ~ 100
24
Red Gain Control
0x29
0 ~ 100
25
Green Gain Control
0x2A
0 ~ 100
26
Blue Gain Control
0x2B
0 ~ 100
27
Treble Control
0x2C
0 ~ 100
28
Bass Control
0x2D
0 ~ 100
29
Balance Control
0x2E
0 ~ 100
30
Coarse Control
0x2F
0 ~ 1
31
Fine Control
0x30
0 ~ 1
32
H-Position Control
0x31
0 ~ 1
11
33
V-Position Control
0x32
0 ~ 1
34
Clear Menu Control
0x34
0
35
Remote Control
0x36
0 ~ 1
36
RGB Contrast Control
0x37
0 ~ 100
37
RGB Brightness Control
0x38
0 ~ 100
38
PIP On/Off Control
0x3C
0 ~ 1
39
Auto Adjustment Control
0x3D
0
40
Color Tone Control
0x3E
0 ~ 4
41
Color Temperature Control
0x3F
0 ~ 10
42
PIP Source Control
0x40
-
43
Main-PIP Swap Control
0x41
0 ~ 1
44
PIP Size Control
0x42
-
45
PIP Locate Control
0x43
0 ~ 4
46
Sound Select Control
0x47
0 ~ 1
47
Auto Lamp Control
0x57
-
48
Manual Lamp Control
0x58
0 ~ 100
49
Safety Screen Control
0x5B
-
50
Video Wall Mode Control
0x5C
0 ~ 1
51
Safety Lock
0x5D
0 ~ 1
52
Panel Lock
0x5F
0 ~ 1
53
OSD On/Off
0x70
0 ~ 1
54
P. Mode Control
0x71
-
55
S. Mode Control
0x72
0 ~ 4
56
NR Mode Set
0x73
0 ~ 1
57
PC Color Tone Control
0x75
0 ~ 3
58
Auto AutoAdjustment
0x76
0 ~ 1
59
All Keys Lock
0x77
0 ~ 1
60
SRS TSXT Control
0x78
0 ~ 1
61
Film Mode
0x79
0 ~ 1
62
Signal Balance
0x7A
0 ~ 1
63
SB Gain
0x7E
0 ~ 100
64
SB Sharpness
0x7F
0 ~ 100
65
Panel On Time
0x83
-
66
Video Wall On
0x84
0 ~ 1
67
Temperature Control
0x85
0 ~ 125
68
Brightness Sensor
0x86
0 ~ 1
12
69
Dynamic Contrast
0x87
0 ~ 1
70
Safety Screen On
0x88
1 ~ 5
71
Video Wall User Control
0x89
-
72
Model Name Control
0x8A
-
73
MagicNet PIP
0xE0
-
74
Panel On/Off
0xF9
0 ~ 1
☞ Note : "-" indicates when the values to be set are multiple.
See "4.1. Detailed Description of Commands" for details
13
4.1. Detailed Description of Commands
1) Status Control
●
Function
The Computer shows the current settings for the TV/Monitor.
●
Get Status
Command Data Length
0x00
●
0
Ack
Command Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0xFF
9
'A'
0x00
Power
Volume
Val 3
Val 4
Val 5
Val 6
Val 7
Mute
Input
Aspect
N Time NF
F Time NF
Check
Sum
Power : The Power Code for the TV / Monitor
Volume : The Volume value for the TV / Monitor ( 0 ~ 100 )
Mute : The Mute Code for the TV / Monitor
Input : The Input Source Code for the TV / Monitor
Aspect : The Image Size Code for the TV / Monitor
N Time NF : On Time On/Off value for the TV / Monitor
F Time NF : Off Time On/Off value for the TV / Monitor
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x00
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurrederror that occurred.
0
Check Sum Error
1
Others
14
2) Time Control
●
Function
The Computer controls the current the for the TV/Monitor
●
Get Time Status
Command Data Length
0x01
●
0
Set Time
Command Data Length
0x01
5
Data 1
Data 2
Data 3
Data 4
AP Time
H Time
M Time
0
Data 5
0
AP Time
: The AM/PM value for the TV / Monitor
1
AM
0
PM
H Time : The Hour Value for the TV / Monitor ( 1 ~ 12 )
M Time : The Minute Value for the TV / Monitor ( 0 ~ 59 )
●
Ack
Command Data Length
Ack/Nak
r-CMD
Val 1
Val 2
AP Time
H Time
Check
Sum
0xFF
7
'A'
0x01
Val 3
Val 4
Val 5
M Time
0
0
Check
Sum
AP Time, H Time, M Time : Same as above
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x01
ERR
ERR : Error Code that shows the type of the error that occurrederror that occurred
15
3) On Time Control
●
Function
The Computer controls when the TV / Monitor turns on.
●
Get On Time Status
Command Data Length
0x02
●
0
Set On Time
Command Data Length
0x02
6
Data 5
Data 6
N Time NF
N Time SC
Data 1
Data 2
N AP Time N H Time
Data 3
Data 4
N M Time
N Time VR
N AP Time : The On Time AM/PM value for the TV / Monitor.
1
AM
0
PM
N H Time : The On Time Hour Value for the TV / Monitor ( 1 ~ 12 )
N M Time : The On Time Minute Value for the TV / Monitor ( 0 ~ 59 )
N Time VR : The On Time Volume for the TV / Monitor ( 0 ~ 100 )
N Time NF : The On Time On/Off value for the TV / Monitor
1
On Time ON
0
On Time OFF
N Time SC : The source value for the On Time Control(See 'Input Source Control ')
●
Ack
Command Data Length
Ack/Nak
r-CMD
0xFF
8
'A'
0x02
Val 3
Val 4
Val 5
Val 6
N M Time N Time VR N Time NF
N Time SC
Val 1
Val 2
N AP Time N H Time
Check
Sum
N AP Time, N H Time, N M Time, N Time VR, N Time NF, N Time SC : Same as above
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x02
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurrederror that occurred
16
4) Off Time Control
●
Function
The Computer controls when the The Computer turn off.
●
Get Off Time Status
Command Data Length
0x03
●
0
Set Off Time
Command Data Length
0x03
6
Data 5
Data 6
F Time NF
0
F AP Time
Data 1
Data 2
Data 3
Data 4
F AP Time F H Time F M Time
0
: The Off Time AM/PM value for the TV / Monitor
1
AM
0
PM
F H Time : The Off Time Hour Value for the TV / Monitor ( 1 ~ 12 )
F M Time : The Off Time Minute Value for the TV / Monitor ( 0 ~ 59 )
F Time NF: The Off Time On/Off value for the TV / Monitor.
●
1
Off Time ON
0
Off Time OFF
Ack
Command Data Length
Ack/Nak
r-CMD
0xFF
8
'A'
0x03
Val 3
Val 4
Val 5
Val 6
F M Time
0
F Time NF
0
Val 1
Val 2
F AP Time F H Time
Check
Sum
F AP Time, F H Time, F M Time, F Time NF : Same as above
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x03
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
17
5) Video Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
The Computer shows the screen settings for the TV / Monitor
●
Get Video Status
Command Data Length
0x04
●
0
Ack
Command Data Length
Ack/Nak
r-CMD
0xFF
0x0A
'A'
0x04
Val 3
Val 4
Val 5
Val 6
Sharpnes
s
Color
Tint
Val 1
Val 2
Contrast Brightness
Val 7
ColorTone ColorTemp
Val 8
0
Check
Sum
Contrast, Brightness, Sharpness, Color, Tint, ColorTone, ColorTemp : Same as above
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x04
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
18
6) Audio Control
●
Function
The Computer controls the audio settings for the TV/ Monitor.
●
Get Audio Status
Command Data Length
0x05
●
0
Ack
Command Data Length
0xFF
0x05
Val 3
Check
Sum
Balance
Ack/Nak
r-CMD
Val 1
Val 2
'A'
0x05
Treble
Bass
Ack/Nak
r-CMD
Val 1
'N'
0x05
ERR
Treble, Bass, Balance : Same as above
●
Nak
Header
0xAA
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
19
7) RGB Control (PC, BNC, DVI, MagicNet Only)
●
Function
The Computer controls the screen settings of the TV / Monitor.
●
Get Video Status
Command Data Length
0x06
●
0
Ack
Command Data Length
0xFF
0x0A
Val 3
Val 4
ColorTone ColorTemp
Ack/Nak
r-CMD
'A'
0x06
Val 5
0
Val 6
Val 1
Val 2
Contrast Brightness
Val 7
Val 8
Red Gain Green Gain Blue Gain
Check
Sum
Contrast, Brightness, Red, Green, Blue : Same as above
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x06
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
20
8) PIP Status Control
●
Function
The Computer shows the PIP settings for TV / Monitor.
●
Get PIP Status
Command Data Length
0x07
●
0
Ack
Command Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0x07
P.Size
P.Source
0xFF
6
'A'
Val 3
Val 4
0
0
Check
Sum
P.Size : The PIP size Value Code of the TV / Monitor
0x00
PIP Off
0x06
Large
0x08
Small
0x04
Double 1
0x05
Double 2
0x09
Double 3
P.Source : The PIP Source Value Code of the TV / Monitor
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x07
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
21
9) Maintenance Control
●
Function
The Computer shows the maintenance setting of the TV / Monitor
●
Get Maintenance Status
Command Data Length
0x08
●
0
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
Val 2
'A'
0x08
Power
P.Size
0x15
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
P.Source
LMax_H
LMax_M
LMax_AP
LMaxValue
LMin_H
Val 9
Val 10
Val 11
Val 12
Val 13
Val 14
LMin_M
LMin_AP
LMinValue
LampValue
ScreenInterval ScreenTime
Val 15
Val 16
Val 17
Val 18
Val 19
Check
ScreenType
V.Wall
V.WallFormat
V.WallDivid
V.WallSet
Sum
Power : The Power Code for the TV / Monitor
P.Size : The value code for the PIP Size of the TV / Monitor
P.Source : The value code for the PIP Source of the TV / Monitor
LMax_H : The value code for the Auto Lamp Max Time Hour of the TV / Monitor (1 ~ 12)
LMax_M : The value code for the Auto Lamp Max Time Minute of the TV / Monitor (0 ~ 59)
LMax_AP : The value code for the Auto Lamp Max Time AM/PM of the TV / Monitor
LMaxValue : The value code for the Auto Lamp Max value of the TV / Monitor (0 ~ 100)
LMin_H : The value code for the Auto Lamp Min Time Hour of the TV / Monitor (1 ~ 12)
LMin_M : The value code for the Auto Lamp Min Time Minute of the TV / Monitor (0 ~ 59)
LMin_AP : The value code for the Auto Lamp Min Time AM/PM of the TV / Monitor
LMinValue : The value code for the Auto Lamp Min Value of the TV / Monitor (0 ~ 100, 0xFF)
LampValue : The value code for the Manual Lamp Control value of the TV / Monitor (0 ~ 100, 0xFF)
ScreenInterval : The value code for the Safety Screen Interval of the TV/Monitor(Per Hour, 0(Off) ~ 10)
ScreenTime : The value code for the Safety Screen Time of the TV / Monitor (0(Off) ~ 5)
ScreenType : The value code for the Safety Screen Type of the TV / Monitor (3 ~ 6)
V.Wall : The value code for the Video Wall Mode of the TV / Monitor
V.WallFormat : The value code for the Video Wall Format of the TV / Monitor
V.WallDivid : The value code for the Video Wall Divider of the TV / Monitor
V.WallSet : The value code for the Video Wall Set Number of the TV / Monitor
Note : if LMinValue returns to 0xFF, it means Auto Lamp Control is in off mode
If LampValue returns to 0xFF, it means Maunal Lamp Control is in off mode.
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x08
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
22
10) Display Status Control
●
Function
The Computer shows the Display status of the TV / Monitor
●
Get Display status
Command Data Length
0x0D
●
0
Ack
Command
Data
Length
Ack/Nak
r-CMD
Val 1
Val 2
0xFF
0x08
'A'
0x0D
Lamp
Temperature
Val 3
Val 4
Val 5
Val 6
Check
Bright_Sensor
No_Sync
Cur_Temp
Fan
Sum
Lamp : The Error code for the lamp of the TV / Monitor (0 : Normal, 1: Error)
Temperature : The Error code for the temperature of the TV / Monitor (0 : Normal, 1: Error)
Bright_Sensor : The Error code for the Bright Sensor of the TV / Monitor (0 : Normal, 1: Error)
No_Sync : The Error code for the Sync of the TV / Monitor (0 : Normal, 1: Error)
Cur_Temp : The value code for the Current Temperature of the TV / Monitor
Fan : The Error code for the Fan of the TV / Monitor (0 : Normal, 1: Error)
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x0D
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
23
11) SW Version Control
●
Function
The Computer shows the version information of the TV / Monitor
●
Get SW Version
Command Data Length
0x0E
●
0
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
Val 2
'A'
0x0E
Version1
Version2
0x11
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
Version3
Version4
Version5
Version6
Version7
Version8
Val 9
Val 10
Val 11
Val 12
Val 13
Val 14
Version9
Version10
Version11
Version12
Version13
Version14
Val 15
Check
Version1
Sum
Version1 ~ Version11 : The Project Info of the TV / Monitor
Version12 ~ Version15 : The SW Version of the TV / Monitor
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x0E
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
24
12) Model Number Control
●
Function
The Computer identifies and display the TV / Monitor's Model Number.
●
Get Model Number Status
Command Data Length
0x10
●
0
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
Val 2
Val 3
'A'
0x10
Species
Model
0
0x05
Check
Sum
Species : Type of panel used used for the TV / Monitor
0x01
PDP
0x02
LCD
0x03
DLP
Model : TV / Monitor's model name
0x10
0x01
PPM50H2
0x02
PPM42S2
0x03
PS-42P2ST
0x04
PS-50P2HT
0x05
SyncMaster 400T
0x06
SyncMaster 403T
0x07
PPM42S3, SPD-42P3SM
0x08
PPM50H3, SPD-50P3HM
0x09
PPM63H3, SPD-63P3HM
0x0A
PS-42P3ST
0x0B
SyncMaster 323T
0x0C
SyncMaster 403T - CT40CS(N)
0x0D
PPMxxM5x
0x13
SyncMaster 320P(n)
0x0E
SyncMaster 320PX
SyncMaster 460PX(n)
SyncMaster 400PX(n)
SyncMaster 400TX(n)
0x14
SyncMaster 570DX(n)
0x15
SyncMaster 320DX
SyncMaster 820DX(n)
SyncMaster 700DX(n)
SyncMaster 400DX(n)
SyncMaster 460DX(n)
0x16
SyncMaster 460TX(n)
SyncMaster 400P(n)
SyncMaster 4600P(n)
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x10
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
25
13) Power Control
●
Function
The Computer turns the TV / Monitor ON/OFF.
●
Get Power ON/OFF Status
Command Data Length
0x11
●
0
Set Power ON/OFF
Command Data Length
0x11
Data 1
1
Power
Power : The Power Code for the TV / Monitor
●
1
Power ON
0
Power OFF
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x11
Power
Ack/Nak
r-CMD
Val 1
'N'
0x11
ERR
3
Check
Sum
Power : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
26
14) Volume Control
●
Function
The Computer changes the Volume level of the TV / Monitor의 Volume.
●
Get Volume Status
Command Data Length
0x12
●
0
Set Volume
Command Data Length
0x12
1
Data 1
Volume
Volume : The Volume level value Code of the TV / Monitor ( 0 ~ 100 )
●
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x12
Volume
Ack/Nak
r-CMD
Val 1
'N'
0x12
ERR
3
Check
Sum
Volume : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
27
15) Mute Control
●
Function
The Computer turns the Mute of the TV / Monitor
●
Get Mute ON/OFF Status
Command Data Length
0x13
●
0
Set Mute ON/OFF
Command Data Length
0x13
1
Data 1
Mute
Mute : The Mute Code of the TV / Monitor
●
1
Mute ON
0
Mute OFF
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x13
Mute
Ack/Nak
r-CMD
Val 1
'N'
0x13
ERR
Check
Sum
Mute : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
28
16) Input Source Control
●
Function
The Computer changes the Input Source of the TV / Monitor.
●
Get Input Source Status
Command Data Length
0x14
●
0
Set Input Source
Command Data Length
0x14
Data 1
1
Input
Input : The Input Source Code for the TV / Monitor
0x14
PC
0x1E
BNC
0x18
DVI
0x0C
AV
0x04
S-Video
0x08
Component
0x20
MagicNet
0x21
HDMI
0x30
TV
0x40
DTV
Note : TV/DTV → TV only
●
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x14
Input
Ack/Nak
r-CMD
Val 1
'N'
0x14
ERR
Check
Sum
Input : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
29
17) Picture Size Control
●
Function
The Computer changes the Aspect Ratio of the TV / Monitor screen.
●
Get Picture Size Status
Command Data Length
0x15
●
0
Set Picture Size
Command Data Length
0x15
1
Data 1
Aspect
Aspect : The Picture Size Code for the TV / Monitor
PC, BNC, DVI
0x10
16 : 9
0x18
4 : 3
TV, AV, S-VIdeo, Component, HDMI
0x00
Auto Wide
0x01
16 : 9
0x05
Zoom 1
0x06
Zoom 2
0x0B
4 : 3
Note : Some Image Size may not available in input signal mode of 720p, 1080i
Auto Wide → TV only
●
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x15
Aspect
Ack/Nak
r-CMD
Val 1
'N'
0x15
ERR
3
Check
Sum
Aspect : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
30
18) Direct Channel Control(ATV, DTV Only)
●
Function
The Computer controls the Channel of TV.
●
Get Direct Channel status
Command Data Length
0x17
●
0
Set Direct Channel
Command Data Length
0x17
●
8
Data 1
Data 2
Data 3
Data 4
Data 5
Country
ATV_DTV
AirCable
CH_NUM
High_Byte
CH_NUM
Low_Byte
Data 6
Data 7
Data 8
Sel_Monitor
Minor_CH
High_Byte
Minor_CH
Low_Byte
Ack
Command
Data
Length
Ack/Nak
r-CMD
Val 1
Val 2
0xFF
0x0A
'A'
0x17
Country
ATV_DTV
Val 3
Val 4
Val 5
AirCable
CH_NUM
High_Byte
CH_NUM
Low_Byte
Val 6
Val 7
Val 8
Sel_Monitor
Minor_CH
High_Byte
Minor_CH
Low_Byte
Check
Sum
Country : The value code for the country of the TV / Monitor (0 : Korea, 1: U.S.A, ...)
ATV_DTV : The value code for the ATV/DTV of the TV / Monitor (0 : Analog TV, 1: Digital TV)
AirCable : The value code for the Air/Cable of the TV / Monitor (0 : Air, 1: Cable)
CH_NUM High_Byte : The value code for the Major Channel High-Byte of the TV / DTV
(Analog TV : 1 ~ 135, Digital TV : 0 ~ 999)
CH_NUM Low_Byte : The value code for the Major Channel Low-Byte of the TV / DTV
(Analog TV : 1 ~ 135, Digital TV : 0 ~ 999)
Sel_Minor : The value code for the Minor Channel Enable/Disable of the TV / Monitor
(0 : Enable, 1 : Disable)(DTV Only)
Minor_CH High_Byte : The value code for the Minor Channel High-Byte of the TV / Monitor
(0 ~ 999)(DTV Only)
Minor_CH Low_Byte : The value code for the Minor Channel Low-Byte of the TV / Monitor
(0 ~ 999)(DTV Only)
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x0D
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
31
19) Contrast Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
The Computer adjusts the Contrast of the TV / Monitor.
●
Get Contrast Status
Command Data Length
0x24
●
0
Set Contrast
Command Data Length
0x24
1
Data 1
Contrast
Contrast : The Contrast Value Code of the TV / Monitor ( 0 ~ 100 )
●
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x24
Contrast
Ack/Nak
r-CMD
Val 1
'N'
0x24
ERR
3
Check
Sum
Contrast : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
32
20) Brightness Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
The Computer adjusts the Brightness settings of the TV / Monitor
●
Get Brightness Status
Command Data Length
0x25
●
0
Set Brightness
Command Data Length
0x25
1
Data 1
Brightness
Brightness : The Brightness value code for the TV / Monitor( 0 ~ 100 )
●
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x25
Brightness
Ack/Nak
r-CMD
Val 1
'N'
0x25
ERR
Check
Sum
Brightness : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
33
21) Sharpness Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
The Computer adjusts the Sharpness of the TV / Monitor.
●
Get Sharpness Status
Command Data Length
0x26
●
0
Set Sharpness
Command Data Length
0x26
1
Data 1
Sharpnes
s
Sharpness : The Sharpness Value Code for the TV / Monitor ( 0 ~ 100 )
Note : Sharpness can be set up within 50 Step(0, 2, 4, 6... 100)
●
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x26
Sharpnes
s
Ack/Nak
r-CMD
Val 1
'N'
0x26
ERR
Check
Sum
Sharpness : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
34
22) Color Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
The Computer adjusts the Color settings of the TV / Monitor.
●
Get Color Status
Command Data Length
0x27
●
0
Set Color
Command Data Length
0x27
1
Data 1
Color
Color : The Color Value Code for the TV / Monitor ( 0 ~ 100 )
●
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x27
Color
Ack/Nak
r-CMD
Val 1
'N'
0x27
ERR
Check
Sum
Color : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
35
23) Tint Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
The Computer adjusts the Tint of the TV / Monitor when the video format is NTSC
Note : It does not work in PAL signal.
●
Get Tint Status
Command Data Length
0x28
●
0
Set Tint
Command Data Length
0x28
1
Data 1
Tint
Tint : The Tint Value Code for the TV / Monitor ( 0 ~ 100 )
R
Tint Value
G
(100 - Tint) Value
Note : Tint can be set up within 50Step (0, 2, 4, 6... 100)
●
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x28
Tint
Ack/Nak
r-CMD
Val 1
'N'
0x28
ERR
Check
Sum
Tint : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
36
24) Red Gain Control (PC, BNC, MagicNet Only)
●
Function
The Computer adjusts the Red Gain of the TV / Monitor.
●
Get Red Gain Status
Command Data Length
0x29
●
0
Set Red Gain
Command Data Length
0x29
1
Data 1
Red
Red : The Red Gain Value Code for the TV / Monitor ( 0 ~ 100 )
●
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x29
Red
Ack/Nak
r-CMD
Val 1
'N'
0x29
ERR
Check
Sum
Red : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
37
25) Green Gain Control (PC, BNC, MagicNet Only)
●
Function
The Computer adjusts the Green Gain of the TV / Monitor
●
Get Green Gain Status
Command Data Length
0x2A
●
0
Set Green Gain
Command Data Length
0x2A
1
Data 1
Green
Green : The Green Gain Value Code of the TV / Monitor ( 0 ~ 100 )
●
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x2A
Green
Ack/Nak
r-CMD
Val 1
'N'
0x2A
ERR
Check
Sum
Green : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
38
26) Blue Gain Control (PC, BNC, MagicNet Only)
●
Function
The Computer adjusts the Blue Gain of the TV / Monitor.
●
Get Blue Gain Status
Command Data Length
0x2B
●
0
Set Blue Gain
Command
0x2B
Blue : The Blue Gain Value Code of the TV / Monitor( 0 ~ 100 )
●
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x2B
Blue
Ack/Nak
r-CMD
Val 1
'N'
0x2B
ERR
Check
Sum
Blue : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
39
27) Treble Control
●
Function
The Computer adjusts the Treble of the TV / Monitor.
●
Get Treble Status
Command Data Length
0x2C
●
0
Set Treble
Command Data Length
0x2C
Data 1
1
Treble
Treble : The Trable Value Code for the TV / Monitor ( 0 ~ 100 )
Note : Treble can be set up within 40 Step. (0, 2, 5, 7... 100)
●
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x2C
Treble
Ack/Nak
r-CMD
Val 1
'N'
0x2C
ERR
3
Check
Sum
Treble : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
40
28) Bass Control
●
Function
The Computer adjusts the Bass of the TV / Monitor.
●
Get Bass Status
Command Data Length
0x2D
●
0
Set Bass
Command Data Length
0x2D
1
Data 1
Bass
Bass : The Bass Value Code for the TV / Monitor( 0 ~ 100 )
Note : Bass can be set up within 40 Step (0, 2, 5, 7... 100)
●
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x2D
Bass
Ack/Nak
r-CMD
Val 1
'N'
0x2D
ERR
Check
Sum
Bass : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
41
29) Balance Control
●
Function
The Computer adjusts the Balance settings of the TV / Monitor.
●
Get Balance Status
Command Data Length
0x2E
●
0
Set Balance
Command Data Length
0x2E
1
Data 1
Balance
Balance : The Balance Value Code for the TV / Monitor ( 0 ~ 100 )
L
(100 - Balance) Value
R
Balance Value
Nots : Balance can be set up within 22 Step (0, 4, 9, 13... 100)
●
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x2E
Balance
Ack/Nak
r-CMD
Val 1
'N'
0x2E
ERR
3
Check
Sum
Balance : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
42
30) Coarse Control (PC, BNC Only)
●
Function
The Computer adjusts the Coarse settings of the TV / Monitor.
●
Get Coarse Status
None
●
Set Coarse
Command Data Length
0x2F
Data 1
1
Coarse
Coarse : The Frequency Increase/Decrease Code for the TV / Monitor
●
1
Increase
0
Decrease
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x2F
Coarse
Ack/Nak
r-CMD
Val 1
'N'
0x2F
ERR
3
Check
Sum
Coarse : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
43
31) Fine Control (PC, BNC Only)
●
Function
The Computer adjusts the Fine settings of the TV / Monitor.
●
Get Fine Status
None
●
Set Fine
Command Data Length
0x30
1
Data 1
Fine
Fine : The Phase Increase/Decrease Code for the TV / Monitor
●
1
Increase
0
Decrease
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x30
Fine
Ack/Nak
r-CMD
Val 1
'N'
0x30
ERR
Check
Sum
Fine : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
44
32) H-Position Control (PC, BNC Only)
●
Function
The Computer adjusts the Horizontal Position settings of the TV / Monitor.
●
Get H-Position Status
None
●
Set H-Position
Command Data Length
0x31
1
Data 1
H-Pos
H-Pos : The H-Position Increase/Decrease Code for the TV / Monitor
●
1
Shift to the right
0
Shift to the left
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x31
H-Pos
Ack/Nak
r-CMD
Val 1
'N'
0x31
ERR
Check
Sum
H-Pos : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
45
33) V-Position Control (PC, BNC Only)
●
Function
The Computer adjusts the Vertical Position settings of the TV / Monitor.
●
Get V-Position Status
None
●
Set V-Position
Command Data Length
0x32
1
Data 1
V-Pos
V-Pos : The V-Position Increase/Decrease Code for the TV / Monitor
●
1
Shift to the right
0
Shift to the left
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x32
V-Pos
Ack/Nak
r-CMD
Val 1
'N'
0x32
ERR
Check
Sum
V-Pos : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
46
34) Clear Menu Control
●
Function
The Computer exits the Menu OSD on the TV / Monitor
●
Get Clear Menu Status
None
●
Set Clear Menu
Command Data Length
0x34
1
Data 1
Clear
Clear : 0x00 (Always)
●
Ack
Command Data Length
0xFF
●
3
Ack/Nak
r-CMD
Val 1
'A'
0x34
Clear
Ack/Nak
r-CMD
Val 1
'N'
0x34
ERR
Check
Sum
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
47
35) Remote Control
●
Function
The Computer enables and disables the IR reception feature of the TV/Monitor remote
This functions independently of the Power On/Off
●
Get Remote Status
Command Data Length
0x36
●
0
Set Remote Enable/Disable
Command Data Length
0x36
1
Data 1
RMC
RMC : Reception (status) Enable/Disable Code for the TV / Monitor Remote
●
1
Remocon Enable
0
Remocon Disable
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x36
RMC
Ack/Nak
r-CMD
Val 1
'N'
0x36
ERR
Check
Sum
RMC : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
48
36) RGB Contrast Control (PC, BNC, DVI, MagicNet Only)
●
Function
The Computer adjusts the Contrast settings of the TV / Monitor when the Aspect is RGB
●
Get Contrast Status
Command Data Length
0x37
●
0
Set Contrast
Command Data Length
0x37
1
Data 1
Contrast
Contrast : The RGB Contrast Value Code for the TV / Monitor ( 0 ~ 100 )
●
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x37
Contrast
Ack/Nak
r-CMD
Val 1
'N'
0x37
ERR
3
Check
Sum
Contrast : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
49
37) RGB Brightness Control (PC, BNC, DVI, MagicNet Only)
●
Function
The Computer adjusts the Brightness settings of the TV / Monitor when the Aspect is RGB
●
Get Brightness Status
Command Data Length
0x38
●
0
Set Brightness
Command Data Length
0x38
1
Data 1
Brightness
Brightness : The RGB Brightness Value Code for the TV / Monitor ( 0 ~ 100 )
●
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x38
Brightness
Ack/Nak
r-CMD
Val 1
'N'
0x38
ERR
Check
Sum
Brightness : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
50
38) PIP On / Off Control
●
Function
The Computer turns the PIP function of the TV / Monitor ON/OFF.
This function is not avaliable for MagicNet Mode
●
Get PIP ON/OFF Status
Command Data Length
0x3C
●
0
Set PIP ON/OFF
Command Data Length
0x3C
Data 1
1
PIP
PIP : PIP On/Off Code for the TV / Monitor
●
1
PIP ON
0
PIP OFF
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x3C
PIP
Ack/Nak
r-CMD
Val 1
'N'
0x3C
ERR
Check
Sum
PIP : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
51
39) Auto Adjustment Control (PC, BNC Only)
●
Function
The Computer adjusts the RGB Screen settings of the TV / Monitor.
●
Get Auto Adjustment Status
None.
●
Set Auto Adjustment
Command Data Length
0x3D
1
Data 1
Auto
Auto : 0x00 (Always)
●
Ack
Command Data Length
0xFF
●
3
Ack/Nak
r-CMD
Val 1
'A'
0x3D
Auto
Ack/Nak
r-CMD
Val 1
'N'
0x3D
ERR
Check
Sum
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
52
40) Color Tone Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
The Computer adjust the Color Tone setting of the TV / Monitor.
●
Get Color Tone Status
Command Data Length
0x3E
●
0
Set Color Tone
Command Data Length
0x3E
1
Data 1
Color Tone
Color Tone : The Color Tone Value Code for the TV / Monitor( 0 ~ 4 )
●
0x00
Cool 2
0x01
Cool 1
0x02
Normal
0x03
Warm 1
0x04
Warm 2
0x50
Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x3E
Color Tone
Ack/Nak
r-CMD
Val 1
'N'
0x3E
ERR
Check
Sum
Color Tone : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
53
41) Color Temp Control
●
Function
The Computer adjust the Color Temp setting of the TV / Monitor.
This function is only available that Color Tone value is 'OFF'
●
Get Color Temp Status
Command Data Length
0x3F
●
0
Set Color Tone
Command Data Length
0x3F
1
Data 1
Color Temp
Color Temp : The Color Temp Value Code for the TV / Monitor( 0 ~ 10 )
●
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x3F
Color Temp
Ack/Nak
r-CMD
Val 1
'N'
0x3F
ERR
Check
Sum
Color Temp : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
54
42) PIP Source Control
●
Function
The Computer adjusts the PIP Source of the TV / Monitor.
Available only when the PIP function is On. Not available in MagicNet
●
Get PIP Source Status
Command Data Length
0x40
●
0
Set PIP Source
Command Data Length
0x40
1
Data 1
P.Source
P.Source : The Input source Code for the TV / Monitor
Changing the PIP source may not be available depending on the main source.
See table below.
<460Txn Model>
PC
DVI
TV/DTV
AV
S-Video
Component
HDMI
PC
X
X
X
○
○
○
X
DVI
X
X
X
○
○
○
X
TV/DTV
X
X
X
X
X
X
X
AV
○
○
X
X
X
X
X
S-Video
○
○
X
X
X
X
X
Component
○
○
X
X
X
X
X
HDMI
X
X
X
X
X
X
X
<400/460/570/700/820Dxn Model>
PC
BNC
DVI
DVI_VIDEO
AV
S-Video
Component
HDMI
PC
X
X
X
X
○
○
○
○
BNC
X
X
X
X
○
○
X
○
DVI
X
X
X
X
○
○
○
X
DVI_VIDEO
X
X
X
X
○
○
○
X
AV
○
○
○
○
X
X
X
X
S-Video
○
○
○
○
X
X
X
X
Component
○
X
○
○
X
X
X
X
HDMI
○
○
X
X
X
X
X
X
Ack/Nak
r-CMD
Val 1
'A'
0x40
P.Source
Ack/Nak
r-CMD
Val 1
'N'
0x40
ERR
●
Ack
Command Data Length
0xFF
3
Check
Sum
P.Source : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
55
43) Main-PIP Swap Control
●
Function
The Computer swap the main screen with the PIP screen.
Not available in MagicNet.
●
Get Main-PIP Swap Status
None.
●
Set Main-PIP Swap
Command Data Length
0x41
1
Data 1
Swap
Swap : 0x00 (Always)
●
Ack
Command Data Length
0xFF
●
3
Ack/Nak
r-CMD
Val 1
'A'
0x41
Swap
Ack/Nak
r-CMD
Val 1
'N'
0x41
ERR
Check
Sum
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
56
44) PIP Size Control
●
Function
The Computer changes the PIP size of the TV / Monitor.
Not available in MagicNet.
●
Get PIP Size Status
Command Data Length
0x42
●
0
Set PIP Size
Command Data Length
0x42
Data 1
1
P.Size
P.Size : The PIP Size Value Code for the TV / Monitor.
●
0x00
PIP Off
0x06
Large
0x08
Small
0x04
Double 1
0x05
Double 2
0x09
Double 3
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x42
P.Size
Ack/Nak
r-CMD
Val 1
'N'
0x42
ERR
3
Check
Sum
P.Size : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
57
45) PIP Locate Control
●
Function
The Computer adjusts the PIP position of the TV / Monitor.
Not available in MagicNet.
●
Get PIP Locate Status
None
●
Set PIP Locate
Command Data Length
0x43
1
Data 1
P.Locate
P.Locate : The value code for PIP LOCATE of the TV / Monitor
●
0
PIP Off(Get Only)
1
Upper Left
2
Upper Right
3
Lower Right
4
Lower Left
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x43
P.Locate
Ack/Nak
r-CMD
Val 1
'N'
0x43
ERR
3
Check
Sum
P.Locate : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
58
46) Sound Select Control
●
Function
The Computer adjust the Sound Settings of the TV/Monitor when the PIP function is
on.
●
Get Sound select
Command Data Length
0x47
●
0
Set Sound select
Command Data Length
0x47
1
Data 1
S.Select
S.Select : The Sound select Code for TV / Monitor
●
1
Main
0
Sub
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x47
S.Select
Ack/Nak
r-CMD
Val 1
'N'
0x47
ERR
3
Check
Sum
S.Select : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
59
47) Auto Lamp Control
●
Function
The Computer adjusts the Auto Lamp Function Settings of the TV / Monitor.
When Manual Lamp Control is set to ON, Auto Lamp Control is turned Off automatically.
●
Get Auto Lamp
Command Data Length
0x57
●
0
Set Auto Lamp
Command Data Length
0x57
●
8
Data 1
LMax_H
Data 2
Data 3
Data 4
LMax_M LMax_AP LMaxValue
Data 5
Data 6
Data 7
Data 8
LMin_H
LMin_M
LMin_AP
LMinValue
Ack
Command Data Length
Ack/Nak
r-CMD
Val 1
Val 2
LMax_M
0xFF
0x0A
'A'
0x57
LMax_H
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
LMin_M
LMin_AP
LMinValue
LMax_AP LMaxValue LMin_H
Check
Sum
LMax_H : The value code for the Auto Lamp Max Time Hour of the TV / Monitor.(1 ~ 12)
LMax_M : The value code for the Auto Lamp Max Time Minute of the TV / Monitor.(0 ~ 59)
LMax_AP : The value code for the Auto Lamp Max Time AM/PM of the TV / Monitor.
LMaxValue : The value code for the Auto Lamp Max Value of the TV / Monitor. (0 ~ 100)
LMin_H : The value code for the Auto Lamp Min Time Hour of the TV / Monitor. (1 ~ 12)
LMin_M : The value code for the Auto Lamp Min Time Minute of the TV / Monitor. (0 ~ 59)
LMin_AP : The value code for the Auto Lamp Min Time AM/PM of the TV / Monitor.
LMinValue : The value code for the Auto Lamp Min Value of the TV / Monitor.(0 ~ 100)
Note : If LMinValue returns to 0xFF, it means Auto Lamp Control is in OFF mode.
If Dynamic contrast is set to on, Auto Lamp Control is not work.
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x57
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
60
48) Manual Lamp Control
●
Function
The Computer adjusts the Manual Lamp Function settings of the TV / Monitor.
When Auto Lamp Control is set to ON, Manual Lamp Control is turned off automatically.
●
Get Manual Lamp Status
Command Data Length
0x58
●
0
Set Manual Lamp
Command Data Length
0x58
1
Data 1
LampValue
LampValue : The Manual Lamp Value code for the TV / Monitor(0 ~ 100)
●
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x58
LampValue
Check
Sum
LampValue : Same as above
Note : If Lamp Value returns to 0xFF ,it means Manual Lamp Control is in OFF mode
If Dynamic contrast is set to on, Auto Lamp Control is not work.
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x58
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
61
49) Safety Screen Control
●
Function
The Computer turns the Safety Screen Control of the TV/Monitor
●
Get Safety Screen Status
Command Data Length
0x5B
●
0
Set Safety Screen
Command Data Length
0x5B
Data 1
Data 2
Data 3
Type
Interval
Second
1
Type : Scroll Type which will be set up into TV / Monitor (3 ~ 6)
Interval : Scroll Interval which will be set up into TV / Monitor (0(off) ~ 10)
Second : Scroll Time which will be set up into TV / Monitor (0(off) ~ 5)
●
Data 1
Type
3
Scroll
4
Pixel
5
Bar
6
Eraser
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
Val 2
Val3
'A'
0x5B
Type
Interval
Second
Ack/Nak
r-CMD
Val 1
'N'
0x5B
ERR
Check
Sum
5
Check
Sum
Type : Same as above
Interval : Same as above
Second : Same as above
●
Nak
Command Data Length
0xFF
3
ERR : Error Code that shows the type of the error that occurred
62
50) Video Wall Mode Control
●
Function
The Computer will switch the mode when the Video Wall feature of the TV / Monitor is set to On
Available only when the Video Wall is On.
Not available in MagicNet
●
Get Video Wall Mode
Command Data Length
0x5C
●
0
Set Video Wall Mode
Command Data Length
0x5C
1
Data 1
WallMode
WallMode : The Video Wall Mode code for the TV / Monitor.
●
1
Full
0
Natural
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x5C
WallMode
Ack/Nak
r-CMD
Val 1
'N'
0x5C
ERR
Check
Sum
WallMode : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
63
51) Safety Lock
●
Function
The Computer turns the Safety Lock of TV/Monitor On/Off.
This can be operated regardless of the power On/Off
●
Get Safety Lock Status
Command Data Length
0x5D
●
0
Set Safety Lock Enable/Disable
Command Data Length
0x5D
1
Data 1
Lock
Lock : The Lock code for the TV / Monitor
●
1
On
0
Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x5D
Lock
Ack/Nak
r-CMD
Val 1
'N'
0x5D
Lock
Check
Sum
Lock : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
64
52) Panel Lock
●
Function
The Computer turns the Panel function Key Lock of TV/Monitor On/Off.
Available even when the power is turned OFF.
●
Get Panel Lock Status
Command Data Length
0x5F
●
0
Set Panel Lock Enable/Disable
Command Data Length
0x5F
1
Data 1
Panel Lock
Lock : The Panel Key Lock On/Off code for the TV / Monitor
●
1
Lock
0
Unlock
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x5F
Panel Lock
Ack/Nak
r-CMD
Val 1
'N'
0x5F
ERR
Check
Sum
Lock : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
65
53) OSD On/Off
●
Function
The Computer turns the OSD of TV/Monitor On/Off.
When the OSD is On, the OSD is displayed on the screen.
When the OSD is Off, the OSD is not displayed on the screen.
●
Get OSD Enable Status
Command Data Length
0x70
●
0
Set OSD Enable/Disable
Command Data Length
0x70
1
Data 1
OSD
OSD : The OSD On/Off code for the TV / Monitor
●
1
OSD Enable
0
OSD Disable
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x70
OSD
Ack/Nak
r-CMD
Val 1
'N'
0x70
ERR
Check
Sum
OSD : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
66
54) P.Mode Control
●
Function
The Computer changes the Picture Mode of TV/Monitor.
●
Get PMode Status
Command Data Length
0x71
●
0
Set PMode
Command Data Length
0x71
1
Data 1
PMode
PMode : The Picture Mode code for the TV / Monitor
Source
Data
Mode
AV
S-Video
Component
HDMI
ATV
DTV
0x00
Dynamic
0x01
Standard
0x02
Movie
0x03
Custom
0x10
Entertain
0x11
Internet
0x12
Text
0x13
Custom
PC
BNC
DVI
MagicNet
●
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x71
PMode
Ack/Nak
r-CMD
Val 1
'N'
0x71
ERR
3
Check
Sum
PMode : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
67
55) S.Mode Control
●
Function
The Computer changes the Sound Mode of TV/Monitor.
●
Get SMode Status
Command Data Length
0x72
●
0
Set SMode
Command Data Length
0x72
1
Data 1
SMode
SMode : The Sound Mode code for the TV / Monitor
●
Data
Mode
0x00
Standard
0x01
Music
0x02
Movie
0x03
Speech
0x04
Custom
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x72
SMode
Ack/Nak
r-CMD
Val 1
'N'
0x72
ERR
3
Check
Sum
SMode : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
68
56) NR Mode Set (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
The Computer changes the Digital NR Mode.
●
Get NR Mode Status
Command Data Length
0x73
●
0
Set NR Mode
Command Data Length
0x73
1
Data 1
NR Mode
NR Mode : The NR Mode On/Off code for the TV / Monitor
●
1
NR Mode On
0
NR Mode Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x73
NR Mode
Ack/Nak
r-CMD
Val 1
'N'
0x73
ERR
Check
Sum
NR Mode : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
69
57) PC Color Tone Control (PC, BNC , DVI, MagicNet only)
●
Function
The Computer changes the Color tone of TV/Monitor.
●
Get Color Tone Status
Command Data Length
0x75
●
0
Set Color Tone
Command Data Length
0x75
1
Data 1
Color Tone
Color Tone : The Color Tone Valur Code for the TV / Monitor(1 ~ 3)
Source
PC
DVI
BNC
●
Data
Mode
0x00
Custom
0x01
Cool
0x02
Normal
0x03
Warm
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x75
Color Tone
Chec
k
Sum
Color Tone : Same as above
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x75
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
70
58) Auto AutoAdjustment
●
Function
The Computer adjusts the Auto Adjustment of TV/Monitor Enable/Disable.
Auto Adjustment is only available when the power is turned On.
●
Get A.Adjustment Status
Command Data Length
0x76
●
0
Set A.Adjustment
Command Data Length
0x76
1
Data 1
A.Adjustment
A.Adjustment : The Auto Adjustment Value Code for the TV / Monitor
●
1
Enable
0
Disable
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x76
A.Adjustment
Check
Sum
A.Adjustment : Same as above
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x76
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
71
59) All Keys Lock
●
Function
The Computer switches both the Remote Control and the Panel Key Lock function ON/PFF.
Available even if the power is turned OFF.
●
Get All Key Status
Command Data Length
0x77
●
0
Set All Key Lock/Unlock
Command Data Length
0x77
Data 1
1
All Key
All Key : The Key Lock On.Off Code for the TV / Monitor
●
1
Lock
0
Unlock
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x77
All Key
Ack/Nak
r-CMD
Val 1
'N'
0x77
ERR
3
Check
Sum
All Key : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
72
60) SRS TSXT Control
●
Function
The Computer enables ON/OFF of SRS TSXT for TV/Monitor.
●
Get SRS TSXT Status
Command Data Length
0x78
●
0
Set SRS TSXT
Command Data Length
0x78
Data 1
1
SRS
SRS: SRS TSXT Code which will be set up into TV / Monitor
●
1
SRS On
0
SRS Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x78
SRS
Ack/Nak
r-CMD
Val 1
'N'
0x78
ERR
Check
Sum
SRS : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
73
61) Film Mode Control
●
Function
The Computer enables ON/OFF of Film Mode for TV/Monitor.
●
Get Film Mode Status
Command Data Length
0x79
●
0
Set Film Mode
Command Data Length
0x79
Data 1
1
FMode
FMode : Film Mode Code which will be set up into TV / Monitor
●
1
Film Mode On
0
Film Mode Off
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x79
FMode
Ack/Nak
r-CMD
Val 1
'N'
0x79
ERR
3
Check
Sum
FMode : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
74
62) Signal Balance (PC,BNC Only)
●
Function
The Computer enables ON/OFF of Signal Balance for Monitor.
●
Get Signal Balance Status
Command Data Length
0x7A
●
0
Set Signal Balance
Command Data Length
0x7A
Data 1
1
SBalance
SBalance : Signal Balance Code which will be set up into Monitor
●
1
Signal Balance On
0
Signal Balance Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x7A
SBalance
Check
Sum
SBalance : Same as above
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x7A
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
75
63) SB Gain (PC,BNC Only)
●
Function
The Computer changes the Gain value of Signal Balance for Monitor.
●
Get SBGain Status
Command Data Length
0x7E
●
0
Set SBGain
Command Data Length
0x7E
Data 1
1
SBGain
SBGain : Gain value which will be set up into Monitor.Code (0~ 100)
●
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x7E
SBGain
Ack/Nak
r-CMD
Val 1
'N'
0x7E
ERR
3
Check
Sum
SBGain : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
76
64) SB Sharpness (PC,BNC Only)
●
Function
The Computer changes the Sharpness value of Signal Balance for Monitor.
●
Get SB Sharpness Status
Command Data Length
0x7F
●
0
Set SB Sharpness
Command Data Length
0x7F
1
Data 1
SBSharpness
SBSharpness : Sharpness value which will be set up into Monitor.Code (0~ 100)
●
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x7F
SBSharpness
Check
Sum
SBSharpness : Same as above
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x7F
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
77
65) Panel On Time
●
Function
The Computer show the Panel On Time status for Monitor.
●
Get Panel On Time Status
Command Data Length
0x83
●
0
Ack
Command Data Length
0xFF
4
Ack/Nak
r-CMD
Val 1
Val 2
'A'
0x83
PTime_H
PTime_L
Check
Sum
PTime_H : Panel On Time High
PTime_L : Panel On Time Low
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x83
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
78
66) Video Wall On
●
Function
The Computer enables ON/OFF of Video Wall for Monitor.
●
Get Video Wall Status
Command Data Length
0x84
●
0
Set Video Wall
Command Data Length
0x84
1
Data 1
V.Wall_On
V.Wall_On : Video Wall On Code which will be set up into Monitor
●
1
Video Wall On
0
Video Wall Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x84
V.Wall_On
Check
Sum
V.Wall_On : Same as above
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x84
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
79
67) Temperature Control
●
Function
The Computer set the Max temperature of TV/Monitor.
●
Get Temperature Status
Command Data Length
0x85
●
0
Set Temperature
Command Data Length
0x85
1
Data 1
Temperature
Temperature : Temperature Code which will be set up into TV/Monitor
Data
●
46 ~ 125(℃)
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x85
Temperature
Check
Sum
Temperature : Same as above
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x85
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
80
68) Brightness Sensor
●
Function
The Computer enables ON/OFF of Brightness Sensor for TV/Monitor.
●
Get Brightness Sensor ON/OFF Status
Command Data Length
0x86
●
0
Set Brightness Sensor ON/OFF
Command Data Length
0x86
1
Data 1
BR_Sensor
BR_Sensor : Brightness Sensor Code which will be set up into Monitor
●
1
Brightness Sensor On
0
Brightness Sensor Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0x86
BR_Sensor
Check
Sum
BR_Sensor : Same as above
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x86
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
81
69) Dynamic Contrast(ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
The Computer enables ON/OFF of Dynamic Contrast for TV/Monitor.
●
Get Dynamic Contrast ON/OFF Status
Command Data Length
0x87
●
0
Set Dynamic Contrast ON/OFF
Command Data Length
0x87
Data 1
1
DY_Cont
DY_Cont : Dynamic Contrast Code which will be set up into Monitor
●
1
Dynamic Contrast On
0
Dynamic Contrast Off
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x87
DY_Cont
Ack/Nak
r-CMD
Val 1
'N'
0x87
ERR
3
Check
Sum
DY_Cont : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
82
70) Safety Screen On
●
Function
Allows Safety Screen function for current TV/Monitor screen
●
Get Safety screen Status
None
●
Set Safety screen
Command Data Length
0x88
Data 1
1
Second
Second : Time to function Scroll for TV/Monitor. (Per Second 1 ~ 5)
●
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
Val 1
'A'
0x88
Second
Ack/Nak
r-CMD
Val 1
'N'
0x88
ERR
3
Check
Sum
Second : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
83
71) Video Wall Control
●
Function
The Computer control the ON/OFF operation of the Video Wall feature for the TV / Monitor.
Not available in MagicNet.
●
Get Video Wall Status
Command Data Length
0x89
●
0
Set Video Wall
Command Data Length
0x89
2
Data 1
Data 2
Wall_Div Wall_SNo
Wall_Div : The Video Wall Divider code for the TV / Monitor
V
1
2
3
4
5
OFF
0x00
0x00
0x00
0x00
0x00
1
0x11
0x12
0x13
0x14
0x15
2
0x21
0x22
0x23
0x24
0x25
3
0x31
0x32
0x33
0x34
0x35
4
0x41
0x42
0x43
0x44
0x45
5
0x51
0x52
0x53
0x54
0x55
H
Wall_SNo : The Video Wall Number code for the TV / Monitor
Set Number
Data
1
0x01
2
0x02
...
...
24
0x18
25
0x19
●
Ack
Command Data Length
0xFF
Ack/Nak
r-CMD
'A'
0x89
4
Val 1
Val 2
Wall_Div Wall_SNo
Check
Sum
Wall_Div : Same as above
Wall_SNo : Same as above
●
Nak
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'N'
0x89
ERR
Check
Sum
ERR : Error Code that shows the type of the error that occurred
84
72) Model Name Control
●
Function
The Computer shows the Model Name information of the TV / Monitor
●
Get Model Name Status
Command Data Length
0x8A
●
0
Ack
Command Data Length
Ack/Nak
r-CMD
0xFF
0x12
'A'
0x8A
Val 6
Val 7
Val_8
Val_9
Val 1
Val 2
Val_3
Val_4
Val_5
M_Name1 M_Name2 M_Name3 M_Name4 M_Name5
Val_10
Val 11
Val_12
Val_13
M_Name6 M_Name7 M_Name8 M_Name9 M_Name10 M_Name11 M_Name12 M_Name13
Val_14
Val_15
Val_16
M_Name14
M_Name15
M_Name16
Check Sum
M_Name1 ~ M_Name16 : The Model Name code for the TV / Monitor
M_Name1
'S'
M_Name2
'y'
M_Name3
'n'
M_Name4
'c'
M_Name5
'M'
M_Name6
'a'
M_Name7
's'
M_Name8
't'
M_Name9
'e'
M_Name10
'r'
M_Name11
'4'
M_Name12
'0'
M_Name13
'0'
M_Name14
'D'
M_Name15
'X'
M_Name16
'N'
85
73) MagicNet PIP (MagicNet Only)
●
Function
The Computer turns the PIP function ON/OFF at MagicNet .
●
Get MagicNet PIP status
None
●
Set MagicNet PIP On - (Data in Red font is for model 460Txn)
Command Data Length
0xE0
0x0C
(0x13)
Data 6
Data 7
H Size
V Size
Low-Byte High-Byte
Data 14
PIP ON
Data 1
Data 2
Data 3
Data 4
Data 5
0x01
H Position
High-Byte
H Position
Low-Byte
V Position
High-Byte
V Position
Low-Byte
H Size
High-Byte
Data 8
Data 9
Data 10
Data 11 Data 11 Data 12
Data 13
V Size
Low-Byte
P.Source
TV
Channel
S.Select Country ATV/DTV
AirCable
Data 16
Data 17
Data 15
CH_NUM CH_NUM
Minor_CH
High_Byte Low_Byte Sel_Minor High_Byte
Data 18
Minor_CH
Low_Byte
H Position High-Byte : The Position value code for PIP H-Start High-Byte.
H Position Low-Byte : The Position value code for PIP H-Start Low-Byte.
V Position High-Byte : The Position value code for PIP V-Start High-Byte.
V Position Low-Byte : The Position value code for PIP V-Start Low-Byte.
H Size High-Byte : The Size value code for PIP H-width High-Byte.
H Size Low-Byte : The Size value code for PIP H-width Low-Byte.
V Size High-Byte : The Size value code for PIP V-width High-Byte.
V Size Low-Byte : The Size value code for PIP V-width Low-Byte.
Note : The PIP Start Position and Size do not over 1366 X 768 or 1920 X 1080
P.Source : The Input source Code
0x14
PC
0x1E
BNC
0x18
DVI
0x0C
AV
0x04
S-Video
0x08
Component
0x21
HDMI
0x30
TV
0x40
DTV
TV Channel : Channel Number (0~99) Note : 460Txn Only
S.Select : The Sound select Code
1
MagicNet Sound
0
PIP Sound
86
Country : The value code for the country of the TV / Monitor (0 : Korea, 1: U.S.A, ...)
ATV_DTV : The value code for the ATV/DTV of the TV / Monitor (0 : Analog TV, 1: Digital TV)
AirCable : The value code for the Air/Cable of the TV / Monitor (0 : Air, 1: Cable)
CH_NUM High_Byte : The value code for the Major Channel High-Byte of the TV / DTV
(Analog TV : 1 ~ 135, Digital TV : 0 ~ 999)
CH_NUM Low_Byte : The value code for the Major Channel Low-Byte of the TV / DTV
(Analog TV : 1 ~ 135, Digital TV : 0 ~ 999)
Sel_Minor : The value code for the Minor Channel Enable/Disable of the TV / Monitor
(0 : Enable, 1 : Disable)(DTV Only)
Minor_CH High_Byte : The value code for the Minor Channel High-Byte of the TV / Monitor
(0 ~ 999)(DTV Only)
Minor_CH Low_Byte : The value code for the Minor Channel Low-Byte of the TV / Monitor
(0 ~ 999)(DTV Only)
●
Ack(Data in Red font is for model 460Txn)
Command Data Length
Ack/Nak
r-CMD
PIP ON
0xE0
0x01
Val 1
Val 2
H Position H Position
Low-Byte
High-Byte
Val 3
Val 4
V Position
Low-Byte
V Position
High-Byte
0xFF
0x15
'A'
Val 5
Val 6
Val 7
H Size
Low-Byte
H Size
High-Byte
Val 13
Val 14
Val 15
Val 16
Val 17
Val 18
Val 19
ATV_DTV
AirCable
CH_NUM
High_Byte
CH_NUM
Low_Byte
Sel_Minor
Minor_CH
High_Byte
Minor_CH
Low_Byte
Val 8
Val 9
V Size
V Size
Low-Byte High-Byte P.Source
Val 10
Val 11
Val 12
TV
Channel
S.Select
Country
Check
Sum
H Position Low-Byte : Same as above
H Position High-Byte : Same as above
V Position Low-Byte : Same as above
V Position High-Byte : Same as above
H Size Low-Byte : Same as above
H Size High-Byte : Same as above
V Size Low-Byte : Same as above
V Size High-Byte : Same as above
P.Source : Same as above
TV Channel : Same as above
S.Select : Same as above
Country : Same as above
ATV_DTV : Same as above
CH_NUM High_Byte : Same as above
CH_NUM Low_Byte : Same as above
Sel_Minor : Same as above
Minor_CH High_Byte : Same as above
Minor_CH Low_Byte : Same as above
87
●
Set MagicNet PIP Off (Data in Red font is for model 460Txn)
Command Data Length
0xE0
●
0x0C
0x13
0x00
Ack (Data in Red font is for model 460Txn)
Command Data Length
0xFF
●
PIP Off
0x0E
0x15
Ack/Nak
r-CMD
PIP Off
'A'
0xE0
0x00
Ack/Nak
r-CMD
Val 1
'N'
0xE0
ERR
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
88
74) Panel ON/OFF
●
Function
The Computer control ON/OFF status of Panel for TV/Monitor.
●
Get Panel ON/OFF Status
Command Data Length
0xF9
●
0
Set Panel ON/OFF
Command Data Length
0xF9
Data 1
1
Panel
Panel : Panel On/Off Code which will be set up into Monitor
●
0
Panel On
1
Panel Off
Ack
Command Data Length
0xFF
3
Ack/Nak
r-CMD
Val 1
'A'
0xF9
Panel
Ack/Nak
r-CMD
Val 1
'N'
0xF9
ERR
Check
Sum
Panel : Same as above
●
Nak
Command Data Length
0xFF
3
Check
Sum
ERR : Error Code that shows the type of the error that occurred
89