Cisco Model DPC2202 DOCSIS 2.0 Cable Modem with Embedded

Data Sheet
Cisco Model DPC2202 DOCSIS 2.0 Cable Modem with
Embedded Digital Voice Adapter
®
The Cisco Model DPC2202 DOCSIS 2.0 Cable Modem with Embedded Digital Voice
Adapter (DPC2202) is a high-speed cable modem with an embedded digital voice
adapter. The DPC2202 features two RJ-11 telephone ports for voice service along with a
10/100BASE-T Ethernet port and a USB 1.1 port for high-speed data connectivity.
®
The DPC2202 is designed to meet PacketCable™ 1.5 and DOCSIS 2.0 specifications
as well as being backward compatible with DOCSIS 1.1 and DOCSIS 1.0 networks. The
DPC2202 uses advanced line-interface technology to provide multi-country, toll-quality,
telephone service using existing in-home wiring. The DPC2202 supports 10 REN total, 5
REN loading on each line.
Figure 1.
DPC2202 DOCSIS 2.0 Cable Modem with Embedded Digital Voice Adapter
(image may vary from actual product and specification)
The DPC2202 fully supports the CODECs specified in PacketCable 1.5. Additional CODECs are
available through a software upgrade that includes a high-fidelity CODEC option for toll-quality plus
service. Standard VoIP call signaling is compliant with PacketCable’s (MGCP/NCS) specifications.
Software upgrades are available to support Session Initiation Protocol (SIP) call signaling.
Features
●
Two-line embedded digital voice adapter for wired telephony service
●
Expanded tuning range, 88-930 MHz
●
Toll-quality, high-compression, and high-fidelity (exceeding toll quality) CODEC options
●
Attractive, compact design that allows for vertical, horizontal, or wall-mounted placement
●
Front panel LEDs provide visual feedback of real-time operational status
●
10/100BASE-T auto-sensing/auto-MDIX Ethernet port
●
USB 1.1 data port (optional)
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 8
Data Sheet
Figure 2.
DPC2202 Front Panel (image may vary from actual product and specification)
Table 1.
Front Panel Features
Feature
Description
Indicators
POWER, DS, US, ONLINE, LINK, TEL1, TEL2
Color
Black, green LEDs, silver text
Branding
Cisco logo and model number
Figure 3.
DPC2202 Back Panel (image may vary from actual product and specification)
Table 2.
Back Panel Connections
Feature
Description
POWER
Connects the modem to the DC output of the AC power adapter
Connector Color: Black
TELEPHONE 1 and 2
Color: Gray
RJ-11 telephone ports connect to home telephone wiring and to conventional telephones or fax
machines
ETHERNET
RJ-45 Ethernet port connect to the Ethernet port on your PC or your home network
Connector Color: Yellow
USB (option)
USB 1.1 port connects to the USB port on your PC
Connector Color: Blue
REBOOT EMTA
Power cycles the modem
CABLE
F-connector connects to an active cable signal from your service provider
Connector Color: White
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 8
Data Sheet
Product Specifications
Table 3.
Product Specifications
Specification
Value
Voice Specifications
Call Signaling Protocol
MGCP/NCS including configurable IPsec encryption.
Configurable to support RFC2833 event signaling
Supports Bell103 detection : Improves alarm panel and Point of Sale (POS) interoperability by
optimizing DSP for bell 103 protocol
Software upgradeable to support Session Initiation Protocol (SIP)
The following SIP standards are supported
● RFC 2617 HTTP Authentication: Basic and Digest Access Authentication
● RFC 2976 The SIP INFO Method
● RFC 3261 SIP: Session Initiation Protocol
● RFC 3262 Reliability of Provisional Responses in Session Initiation Protocol (SIP)
● RFC 3263 Session Initiation Protocol (SIP): Locating SIP Servers
● RFC 3264 An Offer/Answer Model with Session Description Protocol (SDP)
● RFC 3265 Session Initiation Protocol (SIP)-Specific Event Notification
● RFC 3420 Internet Media Type message/sipfrag
● RFC 3428 Session Initiation Protocol (SIP) Extension for Instant Messaging
● RFC 3515 The Session Initiation Protocol (SIP) Refer Method
● RFC 3842 A Message Summary and Message Waiting Indication Event
Package for the Session Initiation Protocol (SIP)
● RFC 3892 The Session Initiation Protocol (SIP) Referred-By Mechanism
● RFC 3903 Session Initiation Protocol (SIP) Extension for Event State Publication
● Draft-ietf-mmusic-sdp-new-24 SDP: Session Description Protocol (Replacement for RFC 2327)
● Draft-ietf-sipping-cc-transfer-01 Session Initiation Protocol Call Control – Transfer
● Draft-ietf-sip-session-timer-08 The SIP Session Timer
● Draft-ietf-sipping-realtimefax-01 SIP Support for Real-time Fax: Call Flow
Examples And Best Current Practices
● Draft-ietf-mmusic-sdescription-09 Session Description Protocol Security
● Descriptions for Media Streams
● Draft-ietf-sip-replaces-02 The Session Initiation Protocol (SIP) "Replaces" Header
Provisioning Modes
Full PacketCable secure provisioning
Kerberos support with NVRAM ticket caching
Configurable PacketCable-lite (MTA config file provisioning without security)
Configurable for non-PacketCable (MTA configuration using DOCSIS config file)
CODECs
Standard: G.711, T.38 Fax Relay, iLBC and BV16
Software upgradeable to support other CODEC combinations including:
● G.711 and G.728
● G.711 and G.729
● G.711 and G.729 a/e
● G.711 and BV16 and BV32 (High fidelity – near CD quality)
● G.711 and G.723
● G.711 and G.726
CODEC Packetization
Intervals
10, 20, and 30mS
CODEC Synchronization
CODEC synchronization to UGS time clock allows slip-free end-to-end sync to PSTN clock
(minimizes frame slips that can cause Fax/Analog Modem call failures)
CODEC Encryption
Configurable to support AES-128 encryption or no encryption modes
Hearing Impaired Services
Support
TDD support including detection of V.18 including Annex A
Fax and Analog Modem
support
DSP based Modem/Fax Tone detection and support for Voice Band Data Mode with
auto-CODEC negotiation and auto-control of echo canceller, jitter buffer, and VAD
Jitter Buffer Support
Adaptive dynamically controlled
Latency Control
Configurable min / max jitter buffer size
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 8
Data Sheet
Specification
Value
Audio Gain Levels
Independently Configurable Tx and Rx audio gains
Silence Suppression
Configurable VAD with comfort noise generation
Packet Loss Concealment
ANSI T1.521-1999
Call Connection Quality
Monitoring
RTCP, RFC1889, RFC1890, SNMP MIB for last call quality statistics
Dialing Modes
DTMF and configurable pulse dial support
DTMF Relay
RFC2833 including fast (40mS) DTMF Relay for alarm system signaling compatibility
Layer 2 Quality of Service
Full PacketCable secure DQOS with GateID including UGS and UGS/AD
DQOS Lite support including UGS and UGS/AD
Layer 3 Quality of Service
Configurable DiffServe/TOS support for Signaling, RTP, and RTCP flows
Payload Header
Suppression (PHS)
Supported for RTP and RTCP packet flows to reduce per-call network bandwidth.
Advanced support for Dynamic Payload Header Suppression using Propane Technology.
Management
SNMPv3, SNMPv2, Telnet with configurable user ID and password, internal log, and external
Syslog support
Echo Cancellation
Call Feature Support
G.168 with extended echo tail support
● Caller ID
● Call Waiting with Caller ID
● Cancel Call Waiting
● Call Conferencing (3-way calls)
● Configurable hook flash support
● Distinctive Ringing (Configurable for up to 11 ring patterns per phone line)
● Ring Splash
● Stutter Dial Tone
● Off hook warning tone
● Open Switch Interval support to enhance answering machine compatibility
● Configurable star codes
● Euro/US hook-flash type
● Call transfer
● Message Waiting Indicator
● Warm Line
● Call Forwarding Unconditional
● Call Forwarding on Busy
● Call Forwarding No Answer
● Call return
● Redial Call
● Automatic redial
Other call features available with compliant CMS
Telephone Ring Loading
Full 5 REN support on each phone line (10 REN total)
Ring Signal
Configurable balanced ring with configurable DC offset
Max Phone Line Distance
Supports up to 1000 ft of AWG26 wire (0.4mm) on each phone line. Supports operation with
typical in-home telephone wiring
Country-Specific
Telephone Parameters
Supported
United States, Japan, United Kingdom, Germany, France, Belgium, Netherlands, Finland, Italy,
Switzerland, Sweden, Denmark, Brazil, ETSI 101 909-18
RF Downstream
Frequency Range
88 to 1002 MHz
Demodulation
64 QAM or 256 QAM
Maximum Data Rate
30.34 Mbps for 64 QAM
42.88 Mbps for 256 QAM
Bandwidth
6 MHz
Operating Level Range
-15 to +15 dBmV
Input Impedance
75 ohms
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 8
Data Sheet
Specification
Value
RF Upstream
Frequency Range
5 to 42 MHz
5 to 85 MHz (option)
Modulation
QPSK
8 QAM
16 QAM
32 QAM
64 QAM
128 QAM TCM
Maximum Data Rate
5.12 Mbps for QPSK
10.2 Mbps for 16 QAM
30.0 Mbps for A-TDMA and SCDMA
Bandwidth
200 kHz to 6.4 MHz
Operating Level Range
(all values +/- 0.5 dBµV )
TDMA
SCDMA
DOCSIS Mode
QPSK
+8 to +58 dBmV
8QAM
+8 to +55 dBmV
16QAM
+8 to +55 dBmV
32QAM
+8 to +54 dBmV
64QAM
+8 to +54 dBmV
QPSK
+8 to +53 dBmV
8QAM
+8 to +53 dBmV
16QAM
+8 to +53 dBmV
32QAM
+8 to +53 dBmV
64QAM
+8 to +53 dBmV
128QAM +8 to +53 dBmV
Output Impedance
75 ohms
Other
Input Voltage
15 VDC
Power Consumption
(Modem Module)
4.68 Watts
Data Ports
Ethernet 10/100BASE-T (Auto-sensing with Auto-MDIX), USB 1.1 Type 2
RF
Female “F” type
Mechanical
Dimensions (W x D x H)
Not including “F” connector:
(approximate)
5 7/8 in. x 4 3/4 in. x 1 1/2 in. (15 cm x 12.2 cm x 3.8 cm)
Weight (approximate)
8.9 oz (0.25 kg)
Operating Temperature
32˚ to 104˚F (0˚ to 40˚C)
Operating Humidity
0 to 90% RH non-condensing
Storage Temperature
-20˚ to 60˚C (-4˚ to 140˚F)
Standards and Approvals
Designed to Comply with
the Following Standards
PacketCable 1.5, 1.0
Regulatory and Safety
Approvals
As required per country where the DPC2202 will be used
DOCSIS 2.0, DOCSIS 1.1, DOCSIS 1.0
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 8
Data Sheet
Ordering Information
Table 4.
Ordering Information
Model
Description
Part Number
2 Voice Ports, North American Tuning Plan – NTSC
Model DPC2202
DPC2202 DOCSIS 2.0 Cable Modem with Embedded Digital Voice
4029160
Adapter. Includes:
● 100-120 VAC/60 Hz, 15 VDC/1 A desktop linear-switching power supply
● Ethernet and USB data cables
● CD-ROM containing user guide
North America
Model DPC2202
DPC2202 DOCSIS 2.0 Cable Modem with Embedded Digital Voice
4029161
Adapter. Includes:
● 100-120 VAC/60 Hz, 15 VDC/1 A desktop linear-switching power supply
● Ethernet and USB data cables
● CD-ROM containing user guide
North America(Customer-specific Configuration)
Model DPC2202
DPC2202 DOCSIS 2.0 Cable Modem with Embedded Digital Voice
Adapter. Includes:
● 220 VAC/50 Hz, 12 VDC/1 A desktop linear-switching power supply
4029837
● No USB port
● Ethernet cable
● CD-ROM containing user guide
Argentina
1 Voice Port, North American Tuning Plan – NTSC
Model DPC2202
DPC2202 DOCSIS 2.0 Cable Modem with Embedded Digital Voice
Adapter. Includes:
● 100-120 VAC/50-60 Hz, 12 VDC/1 A desktop linear-switching power
supply
● No USB port
4037426
● Ethernet cable
● CD-ROM containing user guide
North America
Model DPC2202
DPC2202 DOCSIS 2.0 Cable Modem with Embedded Digital Voice
Adapter. Includes:
● 220 VAC/50-60 Hz, 15 VDC/1 A desktop linear-switching power supply
4028934
● No USB port
● Ethernet cable
● CD-ROM containing user guide
Argentina (Customer-specific Configuration)
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 8
Data Sheet
Replacement Components
Table 5.
Replacement Components
Description
Part Number
Power Supply
Class 2 Linear Switching
100-120 VAC / 50-60 Hz, 15 VDC /1 A desktop style linear-switching power supply for North America
4020982
220 VAC / 50-60 Hz, 15 VDC /1 A desktop style linear-switching power supply for Argentina
4025790
Data Cables
Etherne tcable, 1.2 meters
740580
USB cable, 1.0 Meter
740579
CD-ROM
CD-ROM with user guide
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
4025495
Page 7 of 8
Data Sheet
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and
other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks.
DOCSIS is a registered trademark of Cable Television Laboratories, Inc.
PacketCable is a trademark of Cable Television Laboratories, Inc.
Other third party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any other company.
(1009R)
Specifications and product availability are subject to change without notice.
 2009-2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Cisco Systems, Inc.
800 722-2009 or 678 277-1120
www.cisco.com
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Part Number 7016577 Rev C
November 2010
Page 8 of 8