VTech InnoTab 3 Baby User`s manual

User’s Manual
Dear Parent,
At VTech®, we know how much you enjoy staying on top of the hottest trends and
having the most high-tech gadgets around. We also know that your kids feel the
same way. With that in mind, we developed InnoTab® 2 Baby, our multi-function
tablet just for kids that brings all the magic of Mom’s and Dad’s tablets into a
fun-filled learning experience that fits their active lifestyles.
InnoTab® 2 Baby is the next generation of learning toys for children that has a
rich library of cartridge software with interactive animated e-books, learning
games, creative activities along with a wide variety of additional apps. It features
a 5” brilliant color LCD touch screen, a rotating camera and video recorder, a
tilt-sensor for game control, as well as a USB port for downloads, SD card slot
for memory expansion and a headphone jack, all housed in a sleek, durable and
compact design for easy portability.
When playing with InnoTab® 2 Baby, kids can look, listen, touch, and tilt their
way through activities to discover a world of fun whenever they want and
wherever they go. Through interactive play, your child will develop skills in
reading, math, social studies, science, music, creativity, and more—which we
know is important to you.
At VTech®, we are dedicated to helping your children uncover their talents. We
thank you for your trust in our products that encourage active minds through
imaginative play.
Sincerely,
Your friends at VTech®
To learn more about InnoTab® 2 Baby and other VTech® toys, visit
www.vtechkids.com
CON
S
T E NT
Introduction ......................................................................... 1
Included in this Package ............................................................ 1
Product Features ............................................................. 2
Getting Started .................................................................. 4
Battery Installation ...................................................................... 5
AC Adaptor .................................................................................
How to Play .................................................................................
Desktop Menu ............................................................................
Status Bar ...................................................................................
5
6
7
7
Content .................................................................................... 8
InnoTab® 2 Baby Animal Photo Album Cartridge ......................
Built-in Apps ...............................................................................
8
9
Built-in Content .......................................................................... 16
Playing an InnoTab® Cartridge ................................................... 18
Online Features .................................................................. 18
Downloads Menu ....................................................................... 18
Inserting an SD Card
................................................................. 18
Connecting to a Computer ........................................................ 19
VTech® Kidizoom® Photos and Videos
.......................... 22
CARE & MAINTENANCE .......................................................... 23
TROUBLESHOOTING ............................................................... 24
TECHNICAL SUPPORT
............................................................ 26
Copyright Notices .............................................................. 26
Disclaimer and Limitation of Liability
END USER LICENSE AGREEMENT
.................... 27
....................................... 28
GNU GENERAL PUBLIC LICENSE ......................................... 29
TION
ODUC
INTR
Thank you for purchasing VTech® InnoTab® 2 Baby The Learning App Tablet!
InnoTab® 2 Baby is a multi-function, touch screen tablet for 1 - 9 year olds.
Toddlers will love using InnoTab® 2 Baby to take photos and videos, read e-books,
listen to music, play games and more. With SD card expandable memory (SD
card not included), and new apps being added to the VTech® Learning Lodge
Navigator® site all the time, InnoTab® 2 Baby is a great tablet for busy toddlers
on the go.
Included in this Package
•One VTech® InnoTab® 2 Baby Learning App Tablet (including 2 InnoTab® 2
Baby Styluses)
•One InnoTab® 2 Baby Animal Photo Album Cartridge
•One Learning Lodge Navigator® Installation CD
•One Gel Skin
•One USB Cable
•One User’s Manual
InnoTab® 2 Baby Styluses
Gel Skin
Learning Lodge Navigator®
Installation CD
User’s manual
USB cable
InnoTab® 2 Baby
Animal Photo Album
Cartridge
InnoTab® 2 Baby
(Including 2 InnoTab® 2 Baby
Styluses)
Warning: All packing materials, such as tape, plastic sheets, packaging locks,
wire ties, and tags are not part of this toy, and should be discarded for your
child’s safety.
1
Note: Please keep the user’s manual as it contains important information.
FE ATUR ES
DUCT
PRO
Rotating Camera
Camera Button
AC Adaptor Jack
Headphone Jack
Power Button
USB Port
Brightness Buttons
Microphone
Touch Screen
Volume Buttons
Help Button
Home Button
Screw On
Battery Cover
InnoTab®
Cartridge Port
Wrist Strap Fastener
(Strap not included.)
InnoTab® 2 Baby Stylus
and Stylus Holder
2
SD Memory Card
Slot (SD card not
included)
Battery
Compartment
Fe atur es
duct
Pro
FEATURES
ACTION
Rotating Camera
Rotate the camera to take pictures of yourself
and your friends.
Touch the screen with your finger or the
InnoTab® 2 Baby stylus to play.
Use this to connect an AC/DC adaptor (sold
separately). For safety reasons, we do not
recommend using an adaptor until your child
is 3 years or older.
Use this to connect headphones (sold
separately). For safety reasons, we do not
recommend using headphones until your child
is 3 years or older.
Press this button to turn InnoTab® 2 Baby on or
off.
Plug the included USB cable into this USB port
to connect the tablet to your computer.
Press these buttons to adjust the screen
brightness.
Press this button to replay voice instructions,
or ask for a hint.
Speak into this microphone to record your voice
or play microphone games.
Press these buttons to adjust the sound volume.
Press this button to enter the Camera app; or
if you are already in the Camera app, press this
button to take a picture.
Press this button to return to the InnoTab® 2
Baby desktop menu at any time.
Insert an InnoTab® cartridge (sold separately)
into this slot to play.
Touch Screen AC Adaptor Jack
Headphone Jack Power Button
USB Port Brightness Buttons
Help Button
Microphone
Volume Buttons
Camera Button
Home Button
InnoTab® Cartridge Port
InnoTab® 2 Baby Stylus
& Stylus Holder
Use your finger or this stylus to play. Always
place the InnoTab® 2 Baby stylus back into the
stylus holder after use.
3
G et
star
ting
te d
Wrist Strap Fastener
Battery Cover
SD Card Slot
Battery Compartment
If you wish, attach a wrist strap here. (NOTE:
Wrist strap not included.)
Use a coin or a screw driver to open the battery
cover. Always replace the InnoTab® 2 Baby
battery cover after changing batteries.
Insert an SD memory card (not included).
(NOTE: InnoTab® 2 Baby is compatible with SD
and SDHC memory cards up to 32GB.)
Insert 4 AA batteries (not included). For battery
installation instructions, please see the next
section.
Battery Installation
•Make sure the tablet is turned off.
•Locate the battery cover on the back of the unit.
Use a coin or a screwdriver to loosen the screw
and remove the battery cover.
•Insert 4 AA batteries as shown in image 2.
•Replace the battery cover and tighten the screw
to secure.
1
2
Battery Notice
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being
charged (if removable).
• Rechargeable batteries are only to be charged under adult supervision
(if removable).
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-zinc),
or rechargeable (Ni-MH).
4
G et
star
ting
te d
• Only batteries of the same or equivalent type as recommended
are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended number
of power supplies.
• Do not dispose of batteries in fire.
NOTE: When InnoTab® 2 Baby is running on batteries, you
may see this icon appear on the screen
. This indicates
that battery power is low, and you should replace the
batteries soon. Battery time remaining once the icon first
appears is approximately 10-30 minutes, depending on the
type of batteries in use. After that, InnoTab® 2 Baby will show
the very low battery screen for 3 seconds, and then will turn
off automatically.
To preserve battery life, InnoTab® 2 Baby will shut down
automatically when there is no input for a few minutes.
AC Adaptor
•Using a VTech® adaptor (AC/DC 7.5V
400mA or 9V
300mA) is
recommended.
•Make sure the tablet is turned off.
•Plug the adaptor (sold separately) into the AC adaptor jack on the top of
InnoTab® 2 Baby.
•Plug the adaptor into a wall socket.
NOTE: The use of an adaptor will override the batteries. When the toy is not
going to be used for an extended period of time, unplug the adaptor.
5
G et
star
ting
te d
Standard Guidelines for Adaptor Toys
•
•
•
•
•
This toy is not intended for use by children under 3 years old.
Only use the recommended toy transformer with this toy.
The adaptor is not a toy.
Never clean a plugged in toy with liquid.
Do not connect the toy to more than the recommended number of power
supplies.
• Do not leave the toy plugged-in for extended periods of time.
How to Play
STEP 1: Turn InnoTab® 2 Baby On
Turn InnoTab® 2 Baby on by holding down the Power button for a few seconds.
A VTech® logo and an InnoTab® 2 Baby logo will appear and remain onscreen
for a few seconds.
STEP 2: Personalize Your Profile
The first time you turn on InnoTab® 2 Baby, you will be asked to personalize your
profile. When you are asked to enter your name, use the on-screen keyboard to
type in your name, and touch "OK" when you’re done. When you are asked to
take your profile picture, touch the on-screen shutter icon, and then touch "OK".
STEP 3: InnoTab® 2 Baby Desktop
In the InnoTab® 2 Baby desktop, you will see 15 built-in
app icons. Flick left or right to look at the apps available
on the desktop menu, and then touch an app icon to
start playing. (For more details about the built-in apps,
please see the Built-in Apps section below.)
NOTE: When you start playing with InnoTab® 2 Baby, please
go to the Clock app to update the date and time to the current
date and time. See the Clock section below for more details.
6
G et
star
ting
te d
Desktop Menu
Status Bar
Built-in Apps
Cartridge Icon
Downloads
Desktop
Desktop
Status Bar: View the Profile name and current time.
Built-in Apps: Touch an app icon to play.
Cartridge Icon: If an InnoTab® cartridge (sold separately) is inserted, touch the
cartridge icon to play.
Downloads: Touch the Downloads icon to view, play, or manage any content
that you have downloaded from Learning Lodge Navigator®. (Please see the
Downloads Menu section below for details.)
Status Bar
Time
Name
Name - The profile name is displayed here.
Time - This is the time display. Go into the Clock app to reset the time if it does
not match your time zone.
7
con
tent
Common Function Icons
Icon
Function
Touch this to confirm you are finished with the current task.
Touch this to cancel.
Touch this to add a new item.
Touch this to delete an item.
Touch this to edit/modify.
Touch this to go back/return to previous screen.
Touch this to exit.
Touch this to enter the delete mode.
Touch this to enter the edit/settings mode.
This indicates that the content has been locked in the Parent Settings.
to unlock the content before it can be deleted.
Hold
InnoTab® 2 Baby Animal Photo Album Cartridge
Insert the InnoTab® 2 Baby Animal Photo Album cartridge into the cartridge port.
You will see a cartridge icon appear at the bottom of the desktop menu. Touch
the icon to play. (NOTE: the InnoTab® 2 Baby Animal Photo Album cartridge is
compatible with InnoTab® 2 Baby only.)
8
con
tent
Photo Album 1: Forest Animals
Go wild in the forest and explore what animals might be hiding in the forest.
Photo Album 2: Ocean Animals
Dive into an underwater adventure and see what animals can be found in the
ocean.
Photo Album 3: Zoo Animals
Take a stroll through the zoo and spot all the animals big and small!
Built-in Apps
E-Reader
Touch the E-Reader icon to read the built-in e-book
or e-books you have purchased and downloaded from
Learning Lodge Navigator®. Flick left or right to move
between the bookshelves and see all the e-books you
have downloaded.
One e-book - "Noah's Ark Animal Adventure" - is included
on your InnoTab® 2 Baby at purchase. (Please see the Builtin Content section below for more details.)
Connect to Learning Lodge Navigator® to purchase
and download more e-books. See the Connecting to a
Computer section on page 19 for more details.
9
con
tent
Games
Touch the Games icon to play the built-in games or games
that you have purchased and downloaded from Learning
Lodge Navigator®. Flick left or right to move between the
game shelves.
Three learning games - Tappimals Zoo, Peek-a-Boo Dance
Party and Chugga Shapes are included on your InnoTab® 2
Baby at purchase. (Please see the Built-in Content section
below for more details.)
Connect to Learning Lodge Navigator® to purchase and
download more games. See the Connecting to a Computer
section on page 19 for more details.
Music
Touch the Music icon to listen to MP3 format songs you
have transferred to your InnoTab® 2 Baby. You can purchase
and download music from Learning Lodge Navigator®, or
you can transfer music to your InnoTab® 2 Baby from your
computer using Learning Lodge Navigator®. 1 2 songs are
included on your InnoTab® 2 Baby at purchase. Expand
InnoTab® 2 Baby memory by inserting an SD memory card
(not included). Connect your InnoTab® 2 Baby to Learning
Lodge Navigator® and select File Manager to transfer music.
See the Connecting to a Computer section on page 19 for
more details.
Video Recorder
Previous
Play/Pause Next
Time
Trash
Thumbnail
Record button
Touch the Video Recorder icon to record videos. The maximum recording
length for each video is 5 minutes.
10
con
tent
Time - This is the elapsed time of the video now recording.
Record button - Touch this to start/stop recording.
Thumbnail - Touch this to view the video you have just taken.
WARNING: Video recordings may take up memory quickly. Connect your
InnoTab® 2 Baby to Learning Lodge Navigator® and select File Manager to
back up your videos to your computer regularly. See Connecting to a Computer
Section on page 19 for more details.
Camera
Touch the Camera icon to take photos with fun decorations and effects.
Normal Mode
Thumbnail
Frame Mode
Sticker Mode
Arrows
Kaleidoscope
Face Detection
Shutter
Funny Face
Normal Mode - Touch this to take a photo without any decoration or effect.
Frame Mode - Touch this to take a photo with a frame.
Sticker Mode - Touch this to take a photo with a silly sticker.
Kaleidoscope - Touch this to take a photo through a kaleidoscope.
Funny Face - Touch this to make a funny face photo.
Thumbnail - Touch this to view the photo you have just taken.
Arrows - Touch these to see more stickers, frames, kaleidoscope effects or
funny face effects.
Face Detection - Touch this to turn face detection on or off.
Shutter - Touch this to take a photo.
TIP: You can select the photo resolution by changing the Photo Size options in
the Settings menu. More memory space is required for higher photo resolutions.
NOTE: Not all effects can be saved on all photo resolutions.
11
con
tent
Videos
Touch the Videos icon to watch motion jpeg (MJPEG and H.264) format videos
you have transferred to your InnoTab® 2 Baby from your computer, videos that
you have purchased and downloaded from Learning Lodge Navigator® , or videos
that you have taken with the Video Recorder app on your InnoTab® 2 Baby. 2
Baby Signs® videos are included on your InnoTab® 2 Baby at purchase. Expand
InnoTab® 2 Baby memory by inserting an SD memory card (not included).
Connect your InnoTab® 2 Baby to Learning Lodge Navigator® and select File
Manager to transfer videos.
Video
Recorder
Album
Previous Rewind Play/Pause Forward Next Trash
See the Connecting to a Computer section on page 19 for more details.
Album - Touch this to go to see a list of saved videos.
Previous – Touch this to go to the previous video.
Rewind – Touch this to rewind the video.
Play/Pause – Touch this to play or pause the video.
Forward – Touch this to fast forward the video.
Next – Touch this to go to the next video.
Trash Can – Touch this to delete the current video.
Video Recorder - Touch this to use your InnoTab® 2 Baby Video Recorder.
For more details about transferring videos to your InnoTab® 2 Baby, please see
the VTech® Kidizoom® Photos and Videos section below.
12
con
tent
Photos
Touch the Photos icon to look at jpeg format
photos you have transferred to your InnoTab®
2 Baby and photos taken with the InnoTab® 2
Baby Camera app. You can transfer photos
to your InnoTab® 2 Baby from your computer
using Learning Lodge Navigator® . Expand
InnoTab® 2 Baby memory by inserting an SD
memory card (not included). Connect your
InnoTab® 2 Baby to Learning Lodge Navigator®
and select File Manager to transfer photos.
See the Connecting to a Computer section
on page 19 for more details.
Camera
Album
Set Wallpaper
Trash
Can
Previous Play Next Album - Touch this to see a list of saved photos.
Set Wallpaper – Touch this to set the current photo as your desktop wallpaper.
Previous – Touch this to go to the previous photo.
Play – Touch this to view a photo slideshow.
Next – Touch this to go to the next photo.
Trash Can – Touch this to delete the current photo.
Camera - Touch this to use your InnoTab® 2 Baby Camera app.
TIP: Turn the Rotating Camera to the front to take a photo of yourself. Turn the
Rotating Camera to the back to take a picture of your friends. You can change
the viewing orientation between landscape and portrait by rotating the tablet.
For more details about transferring photos to your SD card, please see the
VTech® Kidizoom® Photos and Videos section below.
Art Studio
Touch the Art Studio icon to draw a picture or edit a photo. Touch a tool on the
right to start your creation.
13
con
tent
New Page
Save
Reset
Undo
Music On/Off
Pencil
Brush
Magic Pen
Sticker
Fun Tool
Eraser
Pencil – Touch this to draw with different colored pencils.
Brush – Touch this to paint with different colored brushes.
Magic Pen – Touch this to draw with fun color and pattern pens.
Sticker – Touch this to put stickers on your creation.
Fun Tool – Touch this to play with silly tools – such as a hopping frog!
Eraser – Touch this and then touch the screen to erase what you’ve done.
New Page – Touch this to make a new creation. You can choose a page template
or a photo to start with.
Save – Touch this to save your creation.
Reset – Touch this to reset the whole creation.
Undo – Touch this to undo what you just did.
Music On/Off – Touch this to turn the background music on or off.
TIP: Touch
to go back to the toolbox menu.
Calendar
Touch the Calendar icon to look at or edit your
calendar. To mark a day with a sticker, drag a
sticker from the tool bar to the day. To add a note,
touch the day, and then type in your note using
the pop-up keyboard.
Touch
to delete a sticker or a note.
You can save up to 500 stickers to mark your important dates!
14
con
tent
Notes
Touch the Notes icon to type a new note or view a note you
have saved. Touch anywhere on the page to open the pop-up
keyboard and start typing.
To look at your saved notes, flick left or right to see the
.
previous or next note. To see a list of all your notes, touch
You can save up to 500 characters per note and a maximum
of 100 notes.
Friends
Touch the Friends icon to add a new friend or view your
friends’ info that you have saved.
Flick up or down to look at more friends. To view or edit a
friend’s information, touch that friend’s name.
You can save info for a maximum of 20 friends.
Calculator
Touch the Calculator icon to do simple calculations.
TIP: Try shaking the tablet to see what happens.
15
CON
TENT
Clock
Touch the Clock to set the time or date, or use the stopwatch.
Clock – Touch this to view or adjust the time.
Stopwatch – Touch this to use the stopwatch to count up.
Date – Touch this to view or adjust the date.
Settings
Clock Stopwatch Date
Touch the Settings icon to edit your profile name, set a profile
picture, record a greeting message, set desktop wallpaper,
change camera photo size, check memory usage, delete
game records, lock content from deletion and view the
InnoTab® 2 Baby firmware version number.
TIP: You can reset the tablet to factory settings by typing
R-E-S-E-T into the My Name profile in Settings.
Warning: Any data saved in internal memory will be lost.
Data saved in an SD card (not included) will not be affected
by resetting the tablet.
Built-in Content
E-Book: Noah's Ark Animal Adventure
When Noah hears a great flood is coming, he
quickly builds an ark and gathers two of every
animal on earth.
Hop on board the ark with Noah and the animals
for a fun learning adventure!
Curriculum: Early Reading Concepts
16
con
tent
Learning Game: Tappimals Zoo
Explore what's hiding in the jungle, ocean, farm and forest!
Touch the animals in the scenes to learn the name and
sound of the animals.
Curriculum: Animals
You can find this game in the Games app and Downloads
menu.
Learning Game: Peek-a-Boo Dance Party
Join the animals as they dance and sway to the music while
learning about numbers. Tap the screen to play peek-a-boo
with the playful animal characters.
Curriculum: Numbers
You can find this game in the Games app and Downloads
menu.
Learning Game: Chugga Shapes
Sing along as the train full of shapes chug, chug, chugs
through the different scenes. Tap the shapes to learn the
names of the five different shapes.
Curriculum: Shapes
You can find this game in the Games app and Downloads
menu.
17
CON
/ O N LI
TENT
NE FE ATUR ES
Playing an InnoTab® Cartridge
If an InnoTab® cartridge (sold separately) has been inserted properly, you will
see the cartridge icon at the bottom of the desktop menu screen. Touch the
cartridge icon to play.
Register online to keep track of your child’s learning journey with personalized
recommendations. You can also connect to our Learning Lodge Navigator® to
download great apps, e-books, music, videos and themes online. To install the
InnoTab® 2 Baby version of the Learning Lodge Navigator® software on your
computer, use the included Learning Lodge Navigator® Installation CD, or go to
www.vtechkids.com/download to download and install it.
Downloads Menu
In the InnoTab® 2 Baby desktop, touch the Downloads icon
to manage your downloaded content. Touch any category at
the bottom to see the downloaded items in that category.
Touch
to enter the delete mode.
In delete mode, touch an item to delete it. A pop-up menu
will ask if you really want to delete that item. Touch "Yes" to
confirm, or "No" to cancel. If you see
the content.
, hold
to unlock
Inserting an SD Card
You can insert an SD card (not included) into your InnoTab® 2 Baby to expand
available memory for downloaded content, photos, videos or music. InnoTab®
2 Baby is compatible with memory cards up to 32GB.
-Make sure the tablet is turned off.
-Locate the SD card slot on the back of InnoTab® 2 Baby under the battery
cover.
18
IN
ONL
U R ES
E FE AT
-Make sure the SD card is not write-protected. Insert the SD card, as shown
in images 3 & 4.
3
4
Connecting to a Computer
•Instructions for PC:
Insert the Learning Lodge Navigator® CD into the CD-ROM drive.
Wait for the installation screen to come up. If the installation screen does
not come up automatically, go to "My Computer" and then right click on
the CD-ROM drive. From the drop-down menu, choose "Explore" and
double click the "VTech_Toy_Setup.exe" icon to start it up manually.
Select the InnoTab® 2 Baby version of Learning Lodge Navigator® on the
installation screen.
•Instructions for Macintosh Computer:
Insert the Learning Lodge Navigator® CD into the CD-ROM drive.
Double click the "VTech Toy Setup" icon in the pop-up window.
•Click "Install" to begin the installation.
19
IN
ONL
U R ES
E FE AT
•Follow the on-screen prompts to install Learning Lodge Navigator®.
NOTE: The installation program for the InnoTab® 2 Baby version of
Learning Lodge Navigator® can be also downloaded from
www.vtechkids.com/download for US or
www.vtechcanada.com/toysdownload for Canada.
•Insert an SD card into your InnoTab® 2 Baby, as shown on Page 18, if you wish
to expand the available memory.
•Turn on your InnoTab® 2 Baby.
•Locate the USB port on the upper right-hand side of your InnoTab® 2 Baby
and open the rubber port cover.
•Insert the smaller end of the included USB cable into the USB port on your
InnoTab® 2 Baby.
20
IN
ONL
U R ES
E FE AT
•Insert the larger end of the USB cable into a USB port on your computer. The
USB port is usually marked with the symbol that appears on the USB port
cover of your InnoTab® 2 Baby. Please refer to images 5 & 6 below.
5
6
After connecting to your computer with the USB cable, your InnoTab® 2 Baby
screen will show a Connected to Computer screen (image 7). For help using the
Download Centre refer to the Help section of the Learning Lodge Navigator®.
7
21
®
i d i zo o
ch K
VTe
m® Photos and
Video
s
VTech® Kidizoom® Photos and Videos
Any photos or videos captured using a VTech® Kidizoom® Camera and saved
on an SD memory card can be played without conversion on InnoTab® 2 Baby.
Insert the SD memory card directly into InnoTab® 2 Baby. Or you may transfer
the photos and videos from your computer to the tablet using Learning Lodge
Navigator®. See the Photos section above for more details.
InnoTab® 2 Baby supports JPEG formatted photos and MJPEG /H.264 baseline
profile formatted video playback. Other video formats can be converted to work
with InnoTab® 2 Baby using third party software (not included).
There may be legal restrictions associated with the use of commercial video files,
movies, programs and other content for which VTech® accepts no responsibility
or liability. Users should take responsibility for observing relevant copyright law
in their country for this type of media.
Recommended format settings required for video playback compatibility with
InnoTab® 2 Baby:
When converting your video for InnoTab, please follow the following guidelines:
Supported format:
H.264 baseline profile video and MP3 audio in an AVI file.
Recommended resolution:
480x272 if source is 16:9 and 320x240 if source is 4:3. Other resolutions are supported
but are not optimal for the device.
Recommended Video bitrate:
600 Kbps. Other bitrates are supported but are not optimal for the device.
Recommended Audio bitrate:
96 Kbps. Other bitrates are supported but are not optimal for the device.
Maximum file size:
2GB (over 5 hours of play time using the recommended setup).
The following freewares may be used to convert most videos:
Avanti GUI
eRightSoft Super©
MediaCoder
TEncoder
(All trademarks are the property of their respective owners. VTech® does not
22 endorse, support or accept any liability for the freeware listed above.)
CAR
E&M
AINTENANCE
NOTE: Do not disconnect InnoTab® 2 Baby or the computer while files are
downloading. After you have finished, turn off the tablet to save power.
When not connected to a computer, please close the USB port cover
on the InnoTab® 2 Baby for safety.
Care & Maintenance
1.
2.
3.
4.
5.
Keep InnoTab® 2 Baby out of direct sunlight and away from direct sources
of heat.
Remove the batteries when not using it for an extended period of time.
Avoid dropping it. NEVER try to dismantle it.
Always keep your InnoTab® 2 Baby away from water.
Please examine the toy transformer periodically for conditions that may
result in the risk of fire, electric shock, or injury to persons (such as damage
to the output cord, blades, housing, or other parts) and that, in an event
of such conditions, the transformer should not be used until properly
repaired.
Using the InnoTab® 2 Baby touch screen and stylus:
• Use only enough pressure to operate the game. Too much pressure may
damage the touch screen.
• Do not use the stylus if it is broken.
• Do not use any other type of stylus on the touch screen other than the
InnoTab® 2 Baby stylus.
• Put the stylus back in the stylus holder when not in use.
Cleaning the InnoTab® 2 Baby touch screen
• Slightly dampen a soft, lint-free cloth with a little water and wipe the screen
to loosen dirt.
• Using a clean and dry cloth, wipe the screen dry. Repeat these two steps as
needed.
Cleaning the InnoTab® 2 Baby cabinet
• Keep your InnoTab® 2 Baby clean by wiping it with a slightly damp cloth. Never
use solvents or abrasives.
23
SHOOTING
UBLE
TRO
WARNING
A very small percentage of the public, due to an existing condition, may experience
epileptic seizures or momentary loss of consciousness when viewing certain types
of flashing colors or patterns, especially on television. While the InnoTab® 2 Baby
Learning App Tablet does not contribute to any additional risks, we do recommend
that parents supervise their children while they play video games. If your child
experiences dizziness, altered vision, disorientation, or convulsions, discontinue use
immediately and consult your doctor. Please note that focusing on an LCD screen
at close range for a prolonged period of time may cause fatigue or discomfort. We
recommend that children take a 15-minute break for every hour of play.
Troubleshooting
Problem
Possible Reason
Screen displays with no Volume is turned down.
sound.
Headphones are
connected.
Screen turns on, then
Battery power low.
immediately off.
No picture (or incorrect Program needs to be
picture) on screen, and reset.
pressing the Power
button has no effect.
No screen display after
pressing Power button.
Adjust the volume control.
Unplug headphones from
headphone jack.
Replace the battery.
Battery power low.
Disconnect all power supplies
(batteries), then reconnect all
power supplies.
Press the Power button.
Remove the cartridge, clean it if
necessary, and then re-insert it
into the InnoTab® 2 Baby.
Replace the battery.
Incomplete battery
installation.
Make sure to install all batteries in
the battery compartment.
No AC adaptor power
Securely connect the AC adaptor
or car adaptor to both the
InnoTab® 2 Baby and the power
source.
Remove the cartridge, clean it if
necessary, and then re-insert it
into the InnoTab® 2 Baby.
The cartridge icon does Poor cartridge
not appear on desktop. connection.
24
Solution
USB connection
window does not pop
up after connecting to
computer.
Touch screen is
inaccurate or it is
impossible to select
the correct icon on the
screen.
Inserted an SD card
(not included), but the
tablet cannot recognise
it.
Files copied to the
tablet's internal
memory disappeared.
The Baby Signs® videos
are missing.
Poor USB cable
connection.
Connection is running
through USB hub.
Touch screen requires
calibration.
Securely connect the USB cable
to InnoTab® 2 Baby and the
computer.
Connect the InnoTab® 2 Baby
directly to the computer, without
using a hub.
Turn the InnoTab® 2 Baby OFF. Then
hold
,
and
down when
turning the InnoTab® 2 Baby ON.
Follow the steps on the screen.
SD card format is not
FAT32.
Format the SD card to FAT32 on
your computer.
The tablet's memory was
not formatted to FAT32.
If formatting the memory is
necessary, make sure it is
formatted to FAT32.
Connect your tablet to Learning
Lodge Navigator® to reinstall the
videos.
The program was reset,
and the videos were
deleted.
If your InnoTab® 2 Baby does not respond to an inserted cartridge, please carefully
try the following:
• Remove all batteries and unplug all wiring.
• Use a cotton swab dipped in rubbing alcohol or an alcohol-based window cleaner
to gently clean the contact area of the cartridge slot.
• If necessary, dry all the clean contact areas with a soft, lint-free cloth.
• Please make sure that all parts are completely dry before restoring power.
Static electricity may cause the InnoTab® 2 Baby to malfunction. In some cases, the
game play score stored in the tablet memory may be lost. In cases where InnoTab®
2 Baby is malfunctioning due to static electricity, reset the tablet by removing and
reinstalling the batteries, or by unplugging and replugging the AC adaptor. Or, if the
static electricity malfunction occurred during the downloading process, disconnect
the USB cable, delete the corrupted file, and reset the tablet as described above.
Then reconnect the USB cable and restart the download process.
25
Technical Support
•If you have a problem that cannot be solved by using this manual, we encourage you
to visit us online or contact our Consumer Services Department with any problems
and/or suggestions that you might have. A support representative will be happy to
assist you. Before requesting support, please be ready to provide or include the
information below:
• The name of your product or model number (the model number is located on the
back of the display panel).
• The actual problem you are experiencing.
• The actions you took right before the problem started.
Internet : www.vtechkids.com
Phone : 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada
Copyright Notices
Copyright 2012 VTech® Electronics North America, L.L.C. All Rights Reserved. VTech®
a registered trademark and the VTech® logo are registered trademarks of VTech®.
Learning Lodge Navigator® is a trademark of VTech®. InnoTab® 2 Baby is a trademark
of VTech® Electronics North America, L.L.C. All other trademarks are property of their
respective owners.
IMPORTANT NOTE:
Creating and developing InnoTab® 2 Baby The Learning App Tablet products is
accompanied by a responsibility that we at VTech® take very seriously. We make every
effort to ensure the accuracy of the information that forms the value of our products.
However, errors sometimes can occur. It is important for you to know that we stand
behind our products and encourage you to call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, with any problems and/or
suggestions that you might have. A service representative will be happy to help you.
This product is licensed under the AVC patent portfolio license for the personal use
of a consumer or other uses in which it does not receive remuneration to
(i) encode video in compliance with the AVC standard (“AVC video”) and/or
(ii) decode AVC video that was encoded by a consumer engaged in a personal activity
and/or was obtained from a video provider licensed to
provide AVC video.
No license is granted or shall be implied for any other use. Additional information
may be obtained from MPEG LA, L.L.C. See
http://www.mpegla.com
26
Disclaimer and Limitation of Liability
VTech® Electronics North America, L.L.C. and its suppliers assume no responsibility
for any damage or loss resulting from the use of this handbook. VTech® Electronics
North America, L.L.C. and its suppliers assume no responsibility for any loss or claims
by third parties that may arise through the use of this software. VTech® Electronics
North America, L.L.C. and its suppliers assume no responsibility for any damage or
loss caused by deletion of data as a result of malfunction, dead battery, or repairs.
Be sure to make backup copies of important data on other media to protect against
data loss. Company: VTech® Electronics North America, L.L.C.
Address: 1156 W. Shure Drive, Suite 200, Arlington Heights, IL 60004 USA
Phone : 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This Class B digital apparatus complies with Canadian ices-003.
Cet appareil numérique de la classe b est conforme à la norme nmb-003 du Canada.
Caution : Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
27
END USER LICENSE AGREEMENT
THIS IS A LEGAL AGREEMENT BETWEEN YOU AND VTECH INC. (“VTECH”), STATING THE TERMS
THAT GOVERN YOUR USE OF SOFTWARE FOR InnoTab® 2 BABY OR IN CONNECTION WITH
THE APPLICATION OF SOFTWARE (“SOFTWARE”). “SOFTWARE” INCLUDES AUDIO FILES FOR
THE InnoTab® 2 BABY SYSTEM.
BY ACTIVATING, USING, DOWNLOADING OR INSTALLING THIS SOFTWARE , YOU ARE AGREEING
TO BE BOUND BY THE TERMS OF THIS AGREEMENT. YOUR RIGHT TO USE THE SOFTWARE
IS CONDITIONAL UPON YOUR AGREEMENT TO THESE TERMS. IF YOU DETERMINE THAT YOU
ARE UNWILLING TO AGREE TO THE TERMS OF THIS LICENSE AGREEMENT, YOU HAVE NO
RIGHT TO USE THE SOFTWARE AND YOU SHOULD PROMPTLY RETURN THE SOFTWARE TO
VTECH OR DELETE IT.
IF YOU ARE UNDER THE AGE OF 18 OR ARE OTHERWISE CONSIDERED A MINOR IN YOUR
JURISDICTION, YOU SHOULD REVIEW THESE TERMS AND CONDITIONS WITH YOUR PARENT
OR GUARDIAN (COLLECTIVELY, “PARENT”) AND MAKE SURE THAT YOUR PARENT UNDERSTANDS
AND AGREES ON YOUR BEHALF TO THESE TERMS AND CONDITIONS.
WHEREVER THIS AGREEMENT REFERS TO “YOU” OR “YOUR,” IT IS MEANT TO INCLUDE BOTH
PARENT AND CHILDREN USERS, EXCEPT WHERE A CHILD IS NOT OF SUFFICIENT LEGAL AGE
TO ENTER INTO A BINDING CONTRACT (SUCH AS AN E-COMMERCE TRANSACTION) OR PROVIDE
ANY REQUIRED CONSENTS (SUCH AS CONSENT TO DATA COLLECTION, PROCESSING, OR
TRANSFERS), IN WHICH CASE THE PARENT OF SUCH CHILD HEREBY ACKNOWLEDGES AND
AGREES HE/SHE IS ACTING ON THE CHILD’S BEHALF TO EFFECTUATE SUCH CONTRACTS OR
CONSENTS AND IS FULLY LIABLE FOR THE ACTIONS OR INACTIONS OF SUCH CHILD WITH
RESPECT TO THE USE OF THE SOFTWARE AND RELATED SERVICES.
1. OWNERSHIP. The Software and Documentation (including all content contained within the
Product) are owned by VTECH, or its licensors, and are protected by international copyright and
other intellectual property laws. The Software and Documentation shall only be used by you in
accordance with this Agreement. The Software and Documentation are licensed, not sold. Except
as specifically set forth herein, VTECH and its licensors retain all right, title and interest, including
all intellectual property rights, in and to the Software and Documentation.
2. LICENSE TERMS. VTECH grants to you, subject to the terms, conditions and limitations further
defined in this Agreement, a non-exclusive, non-sublicenseable, non-transferable license for noncommercial use, and to use the Documentation in connection with such use of the Software. Any
modifications, upgrades, error corrections, or other updates to the Software provided by VTECH
to you shall be deemed part of the Software and use thereof shall be governed by the terms and
conditions of this Agreement, unless the parties have entered into a separate, written agreement
governing such modifications, upgrades, error corrections, or other updates.
3. RESTRICTIONS ON REVERSE ENGINEERING AND SECURITY. Except to the extent otherwise
expressly and unambiguously authorised by VTECH or to the extent such restrictions are explicitly
prohibited by applicable law, you shall NOT reverse engineer, decompile, disassemble, translate
or attempt to learn the source code of the Software (ii) copy, modify, create derivative works of,
distribute, sell, assign, pledge, sublicense, lease, loan, rent, timeshare, deliver or otherwise transfer
the Software (iii) remove from the Software, or alter or add, any copyright, trademarks, trade names,
28
logos, notices or markings (iv) violate, tamper with or circumvent any security system or measures
implemented by VTECH which are designed to prevent unauthorised copying of the Software. Any
such forbidden use shall immediately terminate your license to the Software without any prior notice.
4. LIMITED WARRANTY. VTECH warrants to you – subject to your compliance with the terms herein
– that for a period of ninety (90) days from the date you purchase the Product, the Software will
substantially conform to VTECH’s published specifications for the Software. Your sole and exclusive
remedy under the foregoing warranty shall be for VTECH, at its choice, to use commercially
reasonable efforts to correct any substantial non-conformity of the Software reported to VTECH
in writing within the warranty period and/or provide a replacement copy of the Software. The
foregoing warranty shall not apply to any non-conformity that is caused by (i) the use or operation
of the Software with an application or in an environment other than that intended or recommended
by VTECH, (ii) modifications to the Software not made by VTECH or (iii) third party hardware or
software provided by any third party.
VTECH MAKES NO WARRANTIES THAT THE SOFTWARE IS ERROR FREE OR IS SUITABLE
FOR YOUR PURPOSES. VTECH MAKES NO WARRANTIES OTHER THAN THOSE SET FORTH
ON THE PREVIOUS PAGE, AND HEREBY DISCLAIMS ALL OTHER WARRANTIES, WHETHER
EXPRESS, IMPLIED OR STATUTORY, WITH RESPECT TO THE SOFTWARE OR DOCUMENTATION,
INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. NO ORAL OR WRITTEN INFORMATION
OR ADVICE GIVEN BY VTECH, ITS RESELLERS, AGENTS OR EMPLOYEES SHALL CREATE A
WARRANTY.
5. LIMITATION OF LIABILITY. IN NO EVENT SHALL VTECH BE LIABLE FOR ANY LOSS OF PROFITS,
USE OF DATA, COST OF REPLACEMENT GOODS OR HARDWARE, OR OTHER INDIRECT,
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OR
INABILITY TO USE THE SOFTWARE DOWNLOAD OR DOCUMENTATION, EVEN IF VTECH HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND NOTWITHSTANDING THE
FAILURE OF ESSENTIAL PURPOSE OF ANY REMEDY. YOU AGREE THAT IN NO EVENT WILL
VTECH’S AGGREGATE LIABILITY HEREUNDER OR RELATED TO YOUR USE OF THE SOFTWARE
OR DOCUMENTATION EXCEED THE AMOUNT PAID FOR THE PRODUCT AND/OR SOFTWARE.
6. TERMINATION. This License Agreement will automatically terminate if you fail to comply with any
term thereof. No notice shall be required from VTECH to effect such termination.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document,
but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By
contrast, the GNU General Public License is intended to guarantee your freedom to share and change
free software--to make sure the software is free for all its users. This General Public License applies
to most of the Free Software Foundation's software and to any other program whose authors commit
to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General
Public License instead.) You can apply it to your programs, too.
29
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses
are designed to make sure that you have the freedom to distribute copies of free software (and charge
for this service if you wish), that you receive source code or can get it if you want it, that you can change
the software or use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or
to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if
you distribute copies of the software, or if you modify it. For example, if you distribute copies of such
a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You
must make sure that they, too, receive or can get the source code. And you must show them these
terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which
gives you legal permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that
there is no warranty for this free software. If the software is modified by someone else and passed on,
we want its recipients to know that what they have is not the original, so that any problems introduced
by others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the program
proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's
free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0.This License applies to any program or other work which contains a notice placed by the copyright
holder saying it may be distributed under the terms of this General Public License. The "Program",
below, refers to any such program or work, and a "work based on the Program" means either the
Program or any derivative work under copyright law: that is to say, a work containing the Program or a
portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter,
translation is included without limitation in the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not covered by this License; they are
outside its scope. The act of running the Program is not restricted, and the output from the
Program is covered only if its contents constitute a work based on the Program
(independent of having been made by running the Program). Whether that is true depends on what
the Program does.
1.You may copy and distribute verbatim copies of the Program's source code as you receive it, in any
medium, provided that you conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and
to the absence of any warranty; and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer
warranty protection in exchange for a fee.
30
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based
on the Program, and copy and distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files
and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is
derived from the Program or any part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when
started running for such interactive use in the most ordinary way, to print or display an announcement
including an appropriate copyright notice and a notice that there is no warranty (or else, saying that
you provide a warranty) and that users may redistribute the program under these conditions, and
telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on the Program is not required
to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are
not derived from the Program, and can be reasonably considered independent and separate works
in themselves, then this License, and its terms, do not apply to those sections when you distribute
them as separate works. But when you distribute the same sections as part of a whole which is a
work based on the Program, the distribution of the whole must be on the terms of this License,
whose permissions for other licensees extend to the entire whole, and thus to each and every part
regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely
by you; rather, the intent is to exercise the right to control the distribution of derivative or collective
works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with
a work based on the Program) on a volume of a storage or distribution medium does not bring the
other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code
or executable form under the terms of Sections 1 and 2 above provided that you also do one of
the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be
distributed under the terms of Sections1 and 2 above on a medium customarily used for software
interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge
no more than your cost of physically performing source distribution, a complete machine-readable
copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above
on a medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source
code. (This alternative is allowed only for noncommercial distribution and only if you received the
program in object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For
31
an executable work, complete source code means all the source code for all modules it contains, plus
any associated interface definition files, plus the scripts used to control compilation and installation
of the executable. However, as a special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary form) with the major components
(compiler, kernel, and so on) of the operating system on which the executable runs, unless that
component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated
place, then offering equivalent access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not compelled to copy the source
along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under
this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void,
and will automatically terminate your rights under this License. However, parties who have received
copies, or rights, from you under this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else
grants you permission to modify or distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program
(or any work based on the Program), you indicate your acceptance of this License to do so, and all
its terms and conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient
automatically receives a license from the original licensor to copy, distribute or modify the Program
subject to these terms and conditions. You may not impose any further restrictions on the recipients'
exercise of the rights granted herein. You are not responsible for enforcing compliance by third
parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason
(not limited to patent issues), conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of
this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License
and any other pertinent obligations, then as a consequence you may not distribute the Program at
all. For example, if a patent license would not permit royalty-free redistribution of the Program by all
those who receive copies directly or indirectly through you, then the only way you could satisfy both
it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the
balance of the section is intended to apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims
or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of
the free software distribution system, which is implemented by public license practices. Many people
have made generous contributions to the wide range of software distributed through that system in
reliance on consistent application of that system; it is up to the author/donor to decide if he or she
is willing to distribute software through any other system and a licensee cannot impose that choice.
32
This section is intended to make thoroughly clear what is believed to be a consequence of the
rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or
by copyrighted interfaces, the original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding those countries, so that distribution
is permitted only in or among countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public
License from time to time. Such new versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns Each version is given a distinguishing version
number. If the Program specifies a version number of this License which applies to it and "any later
version", you have the option of following the terms and conditions either of that version or of any
later version published by the Free Software Foundation. If the Program does not specify a version
number of this License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution
conditions are different, write to the author to ask for permission. For software which is copyrighted by
the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions
for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of
our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED
IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS
IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH
YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY
TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Customer Support : http://www.vtechkids.com/support/
2012 © VTech
Printed in China
91-002732-001 US
33