ELECTRONICS
User’s Guide
Printed in Korea
English. 09/2003. Rev. DP. 4.0
SGH-Z100
Z100.book Pages 2 - 3 Thursday, October 9, 2003 9:52 AM
Welcome
Contents
Congratulations on choosing the Samsung
SGH-Z100.
Important Safety Precautions. . . . . . . . . . 5
Using Menu Functions . . . . . . . . . . . . . . 36
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . 7
Accessing a Menu Function by Scrolling . . . . . . . . . 36
Accessing a Menu Function by Using its Shortcut . . . 38
List of Menu Functions . . . . . . . . . . . . . . . . . . . . . 39
Your Phone . . . . . . . . . . . . . . . . . . . . . . . . 8
Your new Samsung SGH-Z100 uses 3G(3rd
Generation) technology to make possible data
connections at faster than broadband speeds,
enabling video capture using its built-in
camcorder, and sending and receiving streaming
video, including video calls.
Phone Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Service Light . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Getting Started . . . . . . . . . . . . . . . . . . . 13
Inserting/Removing the SIM Card . . . . . .
Installing/Removing/Charging the Battery
Switching the Phone On or Off . . . . . . . .
Selecting Functions and Options . . . . . . .
Switching Applications . . . . . . . . . . . . . .
The SGH-Z100 features today’s most advanced
technology including a built-in rotating digital
camera and high-quality TFT colour screen that
reproduces 260,000 different colour
shadeds(four times most other colour screen).It
also features 40 polyphonic ring tones.
This User’s Guide published by Samsung.
Some of the contents in this User’s Guide may differ
from your phone, depending on the software
installed or your service provider.
Improvements and changes to this User’s Guide
necessitated by typographical errors, inaccuracies of
current information, or improvement of software or
hardware, may be made by Samsung without notice.
2
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
14
17
17
19
Call Functions . . . . . . . . . . . . . . . . . . . . 21
Copyright © 2003 By Samsung. All rights reserved.
And all its featues are already enabled through
your local Vodafone network-nothing to set up
except your Email address details.
.
.
.
.
.
Making a Call . . . . . . . . . . . . .
Ending a Call . . . . . . . . . . . . .
Answering a Call . . . . . . . . . . .
Rejecting a Call. . . . . . . . . . . .
Adjusting the Volume . . . . . . .
Accessing Options During a Call
Using Video Call Features. . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
21
23
23
23
24
24
29
Entering Text . . . . . . . . . . . . . . . . . . . . 31
Changing the Text Input Mode
Using T9 Mode . . . . . . . . . . .
Using the ABC Mode . . . . . . .
Using the Number Mode. . . . .
Using the Symbol Mode . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
31
32
34
35
35
Applications . . . . . . . . . . . . . . . . . . . . . . 42
Application Explorer . . . . . . . . .
Instant Message . . . . . . . . . . .
Camera . . . . . . . . . . . . . . . . .
Media Player . . . . . . . . . . . . . .
Voice Memo . . . . . . . . . . . . . .
Downloading a New Application .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
42
43
43
47
49
50
Call Log . . . . . . . . . . . . . . . . . . . . . . . . . 52
All, Dialled, Missed, or Received Calls (Menu 2-1~4) 52
Call Cost (Menu 2-5) . . . . . . . . . . . . . . . . . . . . . . 53
Call Time (Menu 2-6) . . . . . . . . . . . . . . . . . . . . . . 53
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . 55
Search Contact (Menu 3-1). .
Add Contact (Menu 3-2) . . . .
Viewing Contact Information .
Groups (Menu 3-3) . . . . . . .
Speed Dial (Menu 3-4) . . . . .
My Info (Menu 3-5) . . . . . . .
Settings (Menu 3-6). . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
55
56
58
59
60
61
61
Internet . . . . . . . . . . . . . . . . . . . . . . . . . 62
Launching the WAP Browser . . . . . . . . . . . . . . . . . 62
Ending the WAP Browser . . . . . . . . . . . . . . . . . . . 62
Navigating the WAP Browser . . . . . . . . . . . . . . . . . 63
3
Z100.book Page 4 Thursday, October 9, 2003 9:52 AM
Entering Text in the WAP Browser .
Using the Browser Menu . . . . . . .
Using Bookmarks . . . . . . . . . . . .
Setting up the WAP Browser. . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
63
63
64
65
Messages. . . . . . . . . . . . . . . . . . . . . . . . 67
Create (Menu 5-1) . .
Inbox (Menu 5-2) . . .
Email Box (Menu 5-3)
Outbox (Menu 5-4) . .
Drafts (Menu 5-5) . . .
Preset (Menu 5-6) . . .
Settings (Menu 5-7) .
Memory Status (Menu
....
....
....
....
....
....
....
5-8)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
67
74
75
76
76
77
77
81
My Stuff. . . . . . . . . . . . . . . . . . . . . . . . . 82
Exploring the Multimedia Files . . . . . . . . . . . . . . . 82
Organiser . . . . . . . . . . . . . . . . . . . . . . . 87
Calendar (Menu 7-1) . . . .
Today’s Event (Menu 7-2)
Schedule (Menu 7-3) . . . .
Anniversary (Menu 7-4) . .
To Do List (Menu 7-5) . . .
Memo (Menu 7-6) . . . . . .
World Clock (Menu 7-7) . .
Calculator (Menu 7-8) . . .
Converter (Menu 7-9) . . .
Alarm (Menu 7-0) . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
87
88
88
89
89
90
91
91
92
92
Profiles . . . . . . . . . . . . . . . . . . . . . . . . . 94
Setting up Sound Modes . . . . . . . . . . . . . . . . . . . 94
Switching the Sound Mode . . . . . . . . . . . . . . . . . . 95
Settings. . . . . . . . . . . . . . . . . . . . . . . . . 96
4
Phone (Menu 9-1) . . . . . . . . .
Display (Menu 9-2). . . . . . . . .
Call (Menu 9-3) . . . . . . . . . . .
Network Selection (Menu 9-4) .
Security (Menu 9-5) . . . . . . . .
Date & Time (Menu 9-6) . . . . .
Own Number (Menu 9-7) . . . .
Memory Status (Menu 9-8) . . .
Mater Reset (Menu 9-9) . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
96
97
99
103
103
106
106
107
107
Solving Problems . . . . . . . . . . . . . . . . . 108
Access Codes . . . . . . . . . . . . . . . . . . . . 111
Phone Password . . . . .
PIN. . . . . . . . . . . . . .
PIN2 . . . . . . . . . . . . .
PUK . . . . . . . . . . . . .
PUK2 . . . . . . . . . . . .
Call Barring Password .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
111
111
112
112
112
112
Health and Safety Information. . . . . . . 113
Exposure to Radio-Frequency
Energy (SAR Information) . . . . . . . .
Precautions When Using Batteries . .
Operating Environment . . . . . . . . . .
Electronic Devices . . . . . . . . . . . . .
Potentially Explosive Atmospheres . .
Emergency Calls . . . . . . . . . . . . . .
Other Important Safety Information .
Care and Maintenance . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
113
114
115
115
116
117
118
119
Glossary . . . . . . . . . . . . . . . . . . . . . . . . 121
Index . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Z100.book Page 5 Thursday, October 9, 2003 9:52 AM
Important Safety Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving;
park the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point
(service station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using
them in aircraft is both illegal and dangerous.
Interference
All wireless phones may be subject to
interference, which could affect their
performance.
Special Regulations
Meet any special regulations in force in the area
you are in and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger (in a hospital for
example).
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna
when the phone is switched on.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
5
Z100.book Pages 6 - 7 Thursday, October 9, 2003 9:52 AM
Important Safety Precautions
Emergency Call
Ensure the phone is switched on and in service.
Key in the emergency number for your present
location, then press the
key. If certain
features are in use, deactivate those features
before making an emergency call. Give all the
necessary information as accurately as possible.
Do not cut off the call until given permission to
do so.
Unpacking
Your package contains the following items:
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
• Battery charger
• Simple Hands-free kit
• Data kit
Phone
Travel Adapter
Water Resistance
Note: You can use only the suppliced or particular
ear-microphone for Z100 model.
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries.
Batteries
Owner’s Manual
Finger Strap
Ear-Microphone
Qualified Service
Only qualified service personnel may install or
repair your phone.
For more detailed safety information, see “Health
and Safety Information” on page 113.
6
7
Z100.book Pages 8 - 9 Thursday, October 9, 2003 9:52 AM
Your Phone
Your Phone
Key
Key
Phone Layout
Perform the functions indicated by
the text above them, on the bottom
(soft keys) line of the display.
Open View
The following illustrations show the main
elements of your phone:
Earpiece
Folder
Antenna
Navigation keys
Service light
Reject key
Camera module
Camera/
Confirmation key
Soft key (left)
Soft key (right)
Volume/Menu
browse keys
Power On/Off /
End key
Send key
Ear-microphone
jack
Application switch
key
8
Description (Continued)
Ends a call.
Switches the phone on and off when
held down.
In the menu mode, cancels your
input and returns to the idle mode.
In the menu mode, scrolls through
the menu options.
Main display
Closed View
External
display
Description
Correction key
Alphanumeric
keys
Special function
keys
In the menu mode, selects the
highlighted menu or option.
In the idle mode, turns the camera
on to allow you to take a picture.
Makes or answers a call.
In the idle mode, access the call
records.
Runs call, message or Internet
feature except quiting current
application.
Enter numbers, letters and some
special characters.
Used for various purposes in
different functions.
The
key inserts a pause when
held down while entering a number.
In the idle mode, the
key enters
or exits the manner mode when
held down.
Deletes characters from the display.
9
Z100.book Pages 10 - 11 Thursday, October 9, 2003 9:52 AM
Your Phone
Key
Your Phone
Description (Continued)
(on the left side of the phone)
During a call, adjusts the earpiece
volume.
In the idle mode with the folder
open, adjusts the key volume.
In the idle mode with the folder
closed, turns on the external
display’s backlight when held down.
Display
Icons
Icon
Display Layout
The display has three areas.
Icons
Icon
Description
Shows the received signal strength.
The greater the number of bars, the
better the signal.
Tells the calling mode.
•
: Voice call is possible
(on the right side of the phone)
Rejects incoming calls when the
folder is closed.
Text and
graphic area
Soft key
indicators
•
: Voice call is impossible
•
: Video call is possible
•
: Video call is impossible
Tells the usague of 2G or 3G network.
•
: You are in 3G network
•
Appears when you are out of your
home area and have logged onto a
different network; for example, when
travelling in other countries.
Tells the type of received message.
•
: Email message
•
: Multimedia message
•
: Short message
•
: Voice mail
•
: Configuration message
: You are not in 3G network
Tells you your phone’s sound mode.
•
: Normal mode
Area
Description
•
: You are working in 3G network
•
First line
Displays various icons (see
page 11).
•
: You are in 2G network
•
: Meeting mode
•
: You are not in 2G network
•
: Drive mode
Display messages,
instructions and any
information that you enter,
number to be dialled, for
example.
•
: You are working in 2G network
•
: Outdoor mode
Shows the functions
currently assigned to the
two soft keys.
Appears when you set an alarm.
Middle lines
Last line
10
Description
Appears when your phone is connected
with PC running the internet wizard.
: Silent mode
Shows the level of your battery. The
more bars you see, the more power
you have left.
11
Z100.book Pages 12 - 13 Thursday, October 9, 2003 9:52 AM
Your Phone
Getting Started
External Display
Your phone has an external display on the folder
cover. It indicates when you have an incoming
call or message, and alerts you at the specified
time when you set an alarm.
When you hold down one of the volume keys, the
external display backlight illuminates.
Service Light
The service light is at the top right corner of the
phone. The light flashes when you are in a
service area. It also flashes when you switch
your phone on or off.
Inserting/Removing the SIM Card
Your Vodafone SIM Card is already loaded with
your subscription details, such as your PIN.
• Keep SIM cards out of the reach of small children.
• The SIM card and its contacts can easily be
damaged by scratches or bending, so be careful when handling, inserting or removing the
card.
Inserting the SIM Card
1. If necessary, remove the battery by referring
to page 15.
2. Insert and slide the SIM card under the two
tabs, ensuring that the notched corner is top
left and the gold contacts of the card face
down into the phone.
• When installing the SIM card, always make
sure that the phone is switched off before you
remove the battery.
Service light
12
13
Z100.book Pages 14 - 15 Thursday, October 9, 2003 9:52 AM
Getting Started
Getting Started
Removing the SIM Card
Installing the Battery
Removing the Battery
To remove the SIM card, slide the card out of the
holder, as shown.
1. Insert the teeth on the bottom of the battery
into the corresponding slots on the phone.
1. If the phone is on, switch it off first by
pressing and holding the
key until the
power-off animation is displayed.
2. To remove the battery, press and hold the
catch above the battery. Lift the battery away
from the phone.
Installing/Removing/Charging the
Battery
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and
chargers. Ask your local Samsung dealer for
further details.
Charging the Battery Using the Travel
Adapter
Note: The phone can be used while the battery is
being charged, but this causes the battery to
charge more slowly.
1. Plug the connector of the travel adapter into
the bottom of the phone. Check that the
arrow on the connector is facing toward the
front of the phone.
2. Press the battery against the back of the
phone until it clicks into place.
Make sure that the battery is properly
installed before switching the phone on.
2. Plug the adapter into a standard AC wall
outlet.
Note: You must fully charge the battery before
using your phone for the first time. A
discharged standard battery is fully
recharged in approximately 120 minutes.
14
15
Z100.book Pages 16 - 17 Thursday, October 9, 2003 9:52 AM
Getting Started
While the battery is charging, the battery icon at
the top right-hand corner of the display is
animated.
3. When charging is finished, unplug the adapter
from the power outlet and from the phone by
pressing the grey buttons on both sides of the
connector and pulling the connector out.
Getting Started
4. Ensure that the adapter has been
disconnected either from the charger or the
wall outlet before removing the battery. To
remove the battery, push and hold the catch
on the charger and lift the battery away.
Low Battery Indicator
When the battery is weak and only a few minutes
of talk time remain, the battery sensor informs
you in the following ways:
• An empty battery icon flashes (
).
• You hear a warning tone.
• A message is repeated at regular intervals on
the display.
Charging the Battery Using the Battery
Charger
Switching the Phone On or Off
4. To switch the phone off, press and hold the
key until the power-off animation
displays.
1. Open the phone.
2. Press and hold the
switches on.
key until the phone
3. If the phone asks for a PIN, enter the PIN
code and press the Unlock soft key. For
further details, see page 123.
The phone begins searching for your network.
When it finds the network, you can see the
network operator’s name. Only when it has
found the network, you can make or receive a
call.
When the battery becomes too weak for the
phone to operate, it switches off automatically.
Selecting Functions and Options
Your phone offers a set of functions to enable you
to customise it. These functions are arranged in
menus and sub-menus, accessed using the two
soft keys marked
and
. Each menu and
sub-menu allows you to view and alter the
settings of a particular function.
The roles of the soft keys vary according to the
current context; the labels on the bottom line of
the display just above the keys indicate their
current roles.
1. Plug the travel adapter connector into the
bottom of the battery charger.
2. Insert the teeth on the bottom of the battery
into the slot on the battery charger and press
the battery until it clicks into place.
3. Plug the travel adapter into a standard AC
wall outlet.
16
Note: The SIM card determines the display
language. To change the language, use
the Language menu option (Menu 91-3); for further details, see page 96.
17
Z100.book Pages 18 - 19 Thursday, October 9, 2003 9:52 AM
Getting Started
Getting Started
Example:
To view the various functions/options available
and select the one required:
1. Press the appropriate soft key.
2. To
select the:
• function displayed
• option highlighted
Press the left soft
key to access the
main menu mode.
Press the right soft
key to access the
internet.
Press the
Select/Save soft key
or the OK key.
If it is numbered, you
can press the
corresponding number
key.
scroll up or down
through the menus or
options
or
scroll left or right
through the menus or
options
or
key.
key.
move back up one
level in the structure
Back/Cancel/Exit
soft key.
return to the idle
mode
Close soft key or the
key.
When an option has suboptions, an arrow displays on
the right.
When you press the
Options soft key in a
function, a list of the options
available displays.
Press the OK or
key and
the sub-option list appears.
You can use it the same way as a normal option
list.
When the options don’t
display in the option
window, you can see the up
or down arrow on both ends
of the list.
To
To disappear the sub-option list, press the
key.
Switching Applications
Press
scroll through the list the
In some functions, you may be asked for a PIN or
password. Enter the required code and press the
Unlock soft key or the OK key.
18
Using an Option list
or
key.
select the option
highlighted
the OK key or the
corresponding number
key.
exit the menu and
return to the
previous screen
the Cancel soft key.
When you press the
Application switch key(
) , you can launches Call,
Messages or Vodafone
live! application and end
the running applications
among them.
Note: You can not open
this window, when another
popup window such as Incoming call, Low battery,
etc. is opened.
19
Z100.book Pages 20 - 21 Thursday, October 9, 2003 9:52 AM
Getting Started
The coloured icon means running and grey means
not running. Scroll through Call, Messages,
or
key and press
Vodafone live! using the
the Select soft key to launch the application
without quiting current applications.
Select the End all? to end the running
applications.
Call Functions
Making a Call
Using the Call Records
Using the Number Keypad
Your phone stores records of the dialled, received
and missed calls chronologically. The last call is
saved in the first position.
When the idle screen displays, enter the area
code and phone number, and press the
key.
To recall any of these numbers:
1. In the idle mode, press the
key.
Correcting the Number
To clear the
Press
last digit displayed
the C key.
whole display
and hold the C key for
more than one second.
2. Press the or key to scroll to the desired
type of call; all, dialled calls, missed calls or
received calls.
3. Use the
and
key to scroll through the
list until the number highlights.
4. To dial the number, press the
Making an International Call
key.
You can also use the Call log menu
(Menu 2). See page 52.
1. Press and hold down the 0 key for the
international prefix. The + character appears.
2. Enter the country code, area code and phone
number and press the
key.
20
21
Z100.book Pages 22 - 23 Thursday, October 9, 2003 9:52 AM
Call Functions
Call Functions
Making a Call Using Contacts
To view the missed call immediately:
You can store contact information, such as
names and phone numbers, that you use
regularly in the SIM card and the phone’s
memory. For more information about adding
contacts, see page 56.
1. Open the folder. The pop up window shows
that you have missed calls.
1. Find the number you want to dial.
To use the missed call options, see page 52.
For further details about searching for a
number, see page 55.
2. To dial the number, press the
key.
Viewing Missed Calls
The number of missed calls displays on the idle
screen immediately after a call is missed.
If you have a subscription that includes the Caller
Line Identification (CLI) feature and you are
unable to answer a call for any reason, you can
find out who is calling you and then call the
person back.
2. To dial the number displayed, press the
key.
4. Repeat steps 2 and 3 to add more pauses and
numbers, if necessary.
Answering a Call
5. Press the
When someone calls you, the phone rings and an
incoming call box displays.
key to dial.
6. When prompted, press the
key to send the
DTMF (Dual Tone Multi-frequency) tones of
the number that follows the pause.
The number is sent to the system.
Making a Call Using a Pause
When you call automated systems, like banking
services, you are often required to enter a
password or account number. Instead of
manually entering the numbers each time, you
can enter them before dialling, separated by a
pause.
1. In the idle mode, enter the first number of a
service, such as the bank’s teleservice
number.
2. Press and hold the
key to insert a pause.
A “P” appears, meaning that a pause will
occur at that point in the dialling sequence.
7. Repeat Step 6, as you are prompted.
Ending a Call
When you want to finish your call, briefly press
the
key or close the folder or press the Exit
option in the call options.
If the caller can be identified, the caller’s phone
number, or name if stored in your phonebook,
displays. If the incoming call is a restricted
number, the display shows Withheld; if it is
unknown, the display shows Anonymous.
1. To answer a call, open the folder. If it is
already open, press the
key or the Accept
soft key.
2. End the call by closing the folder or pressing
the
key.
Note: You can answer a call while using menu
features. The current operation is cancelled.
Rejecting a Call
To reject an incoming call, press the
the right side of the phone.
key on
3. Enter the number that needs to follow the
pause, such as your account number.
22
23
Z100.book Pages 24 - 25 Thursday, October 9, 2003 9:52 AM
Call Functions
When the phone is open, you can also press the
Reject soft key.
Adjusting the Volume
During a call, if you wish to adjust the earpiece
volume, use the volume keys on the left side of
the phone.
Press the key to increase the volume level and
the key to decrease the level.
Call Functions
Accessing Options During a Call
Your phone provides a number of control
functions that you can use during a call:
Putting a Call on Hold
You can place the current call on hold whenever
you want. You can make another call while you
have a call in progress if your network supports
this service. Of these two calls, one is active and
the other is on hold and you can switch between
them.
Note: You can first enter a phone number and then
press the Options soft key. Then select the
New call option.
Or alternatively:
1. Put the current call on hold by pressing the
Hold soft key.
2. Make the second call in the normal way.
To switch between the two calls, simply press the
SWAP soft key. The current call is placed on hold
and the call on hold is reactivated so that you can
continue conversing with the other person.
Making a Second Call
To end the current call, press the
key. The
call on hold is still on hold. To reactiveate this call
press the Unhold soft key.
1. Press the Options soft key.
24
The first call is automatically put on hold.
To place a call on hold, simply press the Hold
soft key. You can reactivate the call whenever
you want, by pressing the Unhold soft key.
To make a call while you have a call in progress:
You can also adjust the key tone volume in the
idle mode with the folder open using these keys.
3. Enter the phone number you want to dial and
press the
key to make the second call.
To end both calls at one time, close the folder, or
press the Options soft key and select Exit.
Answering a Waiting Call
You can answer an incoming call while you have
a call in progress, if this service is supported by
the network and you have activated the Waiting
menu option;see page 101. Your phone alerts
you to an incoming call by sounding a call waiting
tone.
To answer a call while you have a call in
progress:
1. Press the Accept soft key to answer the
incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the
SWAP soft key.
To end the current call, press the
key. The
call on hold is automatically activated.
To end both calls at one time, close the folder, or
press the Options soft key and select Exit.
2. Select New call and press the OK key.
25
Z100.book Pages 26 - 27 Thursday, October 9, 2003 9:52 AM
Call Functions
Making a Conference Call
The Conference Call feature is a Vodafone service
that allows up to five people to take part
simultaneously in a call. You can make a
conference call by making or receiving another
call while you are on one active call.
Setting up the Conference Call
1. Call the first participant in the normal way.
2. Make a second call, referring to page 24.
OR
Answer a waiting call, referring to page 25.
3. To join the first participant to the conference
call, press the Options soft key and select
Join using the
and
keys.
4. Press the OK key.
5. To add a new person to the conference call,
repeat steps 2 to 4, as needed.
26
Call Functions
Holding a Private Conversation With One
Participant
To speak privately with one person during a
conference call:
Removing One Participant
1. Press the Options soft key and select the
Drop option. Press the OK key.
1. Press the Options soft key and select Split.
Press the OK key.
2. Press the
and
key to scroll to the
participant you want to remove and press the
OK key.
2. Press the
or
key to scroll to the
participant you want to split and press the OK
key.
The call ends with that participant, but you
can continue to talk with the other
participants.
3. Enter the first few letters of the name you
want to find.
For further details about entering text, see
page 31.
For further details of the Contacts feature, see
page 58.
Send an SMS Message
You can send an SMS (Short Message Service)
message during a normal call or conference call.
You can send the message to other people as
well as your current call participants.
Now you can talk privately with that person.
The other participants can continue to
converse with each other.
You can end the conference call by closing the
phone or pressing the
key.
You can switch between the conference call
and the split call by pressing the SWAP soft
key.
Searching Contacts
1. Press the Options soft key.
You can search for a number in your Contacts
during a call.
2. Press the
or
key to select Send
message and press the OK key.
3. To return to the conference call, press the
Options soft key and select Join. Press the
OK key.
All the conference call participants can now
hear each other.
1. Press the Options soft key.
2. Press the
and
key to select Contacts
and press the OK key.
The list of all the call participants appears.
3. Scroll to the person to whom you want to
send the message and press the OK key.
A check mark appears in front of the selected
person. Repeat this step as needed.
27
Z100.book Pages 28 - 29 Thursday, October 9, 2003 9:52 AM
Call Functions
4. When you finish selecting recipients, press
the Write soft key.
5. Write your message and press the Next soft
key.
For further details about entering text, see
page 31.
6. Enter any other phone number to which you
want to send the message.
If you want to add more numbers, press the
key and enter a number. Repeat as
needed.
7. When you finish entering the numbers, press
the SMS soft key.
For more information on the SMS feature, refer
to page 67.
Call Functions
Switching the Microphone Off (Mute)
Sending DTMF Tones
Making a Video Call
You can temporarily switch your phone’s
microphone off, so that person you are talking to
cannot hear you.
You can send a number to the other person
during a call. The number sent will appear on the
display of the other person’s phone.
1. In the idle mode, enter a phone number to
dial. You can also use the phone number in
the call records.
Example: You wish to say something to another
person in the room but do not want
the calling party to hear you.
1. Press the Options soft key.
Or,
2. Press the
or
key to select DTMF and
press the OK key.
Turn on the camera on your phone by
pressing the OK key.
To switch the microphone off temporarily:
1. Press the Options soft key.
2. Press the
or
key to select Mute and
press the OK key.
To switch the microphone back on:
2. Press the
or
key to select Unmute and
press the OK key.
The Mute icon disappears.
2. Press the Dial soft key and enter a phone
number.
3. Press the V-Call soft key.
Using Video Call Features
When your call is connected, the other person
appears on the screen.
When in a 3G service area, your phone can make
or receive a video call which allows you to see
another person on the screen during a
conversation. The other person’s phone must
have the video call feature.
Whenever you press the Show me soft key, the
image of the person on the screen switches to
another.
The Mute icon ( ) appears on the display and
your party can no longer hear you.
1. Press the Options soft key.
28
3. Enter the number you want to send and press
the Send soft key.
Note: If the other person does not turn the camera
on, you will not be able to see him or her.
You can communicate only by voice.
Press the Mute soft key to mute the Voice,
Camera(Video), Voice-Video all and
Keytone.
29
Z100.book Pages 30 - 31 Thursday, October 9, 2003 9:52 AM
Call Functions
Receiving a Video Call
Turning Your Voice or Video On or Off
You can receive a video call the same as
receiving a normal call, except that you can see
the person on the screen.
You can mute your voice or turn the video off
during a video call.
See page 23 for details about answering a call.
During a video call, press the Options soft key
to display the option list.
The following options are available:
Changing the View Options
You can change the screen mode for video calls
to PIP (Picture-in-Picture). In the PIP mode, the
display has a main and a sub-frame where you
can see yourself on the screen, as well as the
other person.
To change the screen mode, press the View soft
key until you see the desired status. The
following modes are available:
• See the other person only in the main frame
• See yourself only in the main frame
• See the other person in the main frame and
yourself in the sub-frame
Mute voice: mutes your voice. The other person
can see you, but cannot hear you.
Mute camera: turns camera off. The other
person can hear you, but cannot see you.
Mute all: mutes your voice and turns camera
off. The other person cannot hear or see you.
Mute keytone: mutes your keytones.
Flip image: turns image on the display upside
down during video calls.
Entering Text
You may need to enter text, when storing a
name in the phonebook, creating your personal
greeting or scheduling events in your calendar.
Your phone has the following text input modes:
• T9 mode*
This mode allows you to enter words with only
one keystroke per letter. Each key on the
keypad has more than one letter. For example,
when you press the 5 key once, J, K or L may
be displayed. The T9 mode automatically
compares your keystrokes with an internal
linguistic dictionary to determine the correct
word, thus requiring far fewer keystrokes than
the traditional ABC mode.
• Number mode
This mode allows you to enter numbers.
• Symbol mode
This mode allows you to enter special
characters, like punctuation marks.
Changing the Text Input Mode
When you are in a field that allows characters to
be entered, the text input mode indicator
appears at the bottom of the display.
• ABC mode
This mode allows you to enter letters by
pressing the key labelled with the required
letter once, twice, three or four times until the
required letter is displayed.
• See yourself in the main frame and the other
person in the sub-frame
* T9 is a registered trademark of Tegic Communications,
Inc. and is licensed under U.S. Patent 5,818,437/
5,953,541/ 6,011,554.
30
31
Z100.book Pages 32 - 33 Thursday, October 9, 2003 9:52 AM
Entering Text
Entering Text
Example: When you write a text message, the
following screen displays:
To switch between the Press and hold the
Number and previous
mode
key.
Symbol and previous
mode
key.
To select the
T9 mode
ABC mode
Press the OK key until
displays. See page 32.
The letter after T9 indicates
which language you are
using.
4. Put a space between words by pressing the
key.
To type a word in the T9 mode:
5. Continue entering any other words in the T9
mode.
displays. See page 35.
Symbol mode
displays. See page 35.
32
1. Start entering the word by pressing the keys
2 to 9. Press each key only once for each
letter.
Example: To enter “hello” in the T9 mode,
press 4, 3, 5, 5 and 6.
The word you are typing appears on the
display. It may change with each key that you
press.
displays. See page 34.
Number mode
Example: Both “of” and “me” have the
sequence of 6 and 3. The phone displays the
most commonly used choice first.
Using T9 Mode
Text input mode
indicator
Quickly Changing the Text Input Mode
3. If the word is correct, start entering the next
word. Otherwise, press the 0 key to display
alternative word choices for the keys that you
pressed.
2. Enter the whole word before editing or
deleting any keystrokes.
If Spell appears above the left soft key while you
are entering text, the word does not exist in the
T9 dictionary. To type words not found in the T9
mode, change the text input mode to the ABC
mode, or proceed as follows:
Smart Punctuation
To enter periods, hyphens or apostrophes, press
the 1 key. The T9 mode applies rules of grammar
to insert the correct punctuation.
Example: The 1 key is used twice to display two
punctuation marks.
l
e
t
’
s
e
a
t
.
Changing the Case
To change the case of the next letters that you
type, press the
key. There are three cases:
• Lower Case (
)
• Initial Capital (
• Capital Lock (
)
)
1. Press the Spell soft key.
2. Enter the word you want to add using the ABC
mode (see page 34) and press the Add soft
key.
The word is saved in the T9 dictionary and
inserted in the input field.
3. Continue entering other words in the T9
mode.
Scrolling
To move the cursor to the left or right within the
text, press the or key.
Clearing Letters and Words
To delete letters, press the C key. Press and hold
down the C key to clear the display.
33
Z100.book Pages 34 - 35 Thursday, October 9, 2003 9:52 AM
Entering Text
Using the ABC Mode
Entering Text
Refer to the table below for more information
about the characters available.
Scrolling
To move the cursor to the left or right within the
text, press the or key.
When typing in the ABC mode, press the key
labelled with the required letter:
- Once for the first letter
Clearing Letters and Words
- Twice for the second letter
To delete letters, press the C key. Press and hold
the C key down to clear the display.
- And so on
Example: To display the letter “c”, quickly press
the 2 key three times. To display the
letter “k”, press the 5 key twice. For
this reason, this method is called
Multi-tap typing.
The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait a few seconds for the cursor to
automatically move to the right or press the
key and then enter the next letter.
Using the Number Mode
Changing the Case
To change the case of the next letters that you
type, press the
key. There are three cases:
• Lower Case (
Using the Symbol Mode
)
• Initial Capital (
• Capital Lock (
You can enter numbers in the Number mode.
Press the keys corresponding to the required
digits.
)
)
Inserting a Space
You can insert symbols into a text message. The
text message you’ve entered is shown in the
symbol entering field. Move the cursor to the
position you enter a symbol using the or key.
To
display more
symbols
Press the
and
key.
select a symbol
corresponding number
key. The selected symbol
displays in the input box.
clear a symbol from
the input box
C key.
insert the edited
message in the
symbol entering
field into your text
OK key.
To insert a space between words, press the
key.
34
35
Z100.book Pages 36 - 37 Thursday, October 9, 2003 9:52 AM
Using Menu Functions
Using Menu Functions
Your phone offers a range of functions that allow
you to tailor the phone to your needs. These
functions are arranged in menus and sub-menus.
The menus and sub-menus can be accessed by
scrolling with the navigation keys or by using the
shortcuts.
Accessing a Menu Function by
Scrolling
1. In the idle mode, press the Menu soft key to
access the menu.
2. Scroll with the navigation keys to reach the
required main menu. Press the OK key to
enter the menu.
3. If the menu contains sub-menus, you can
access them by scrolling with the
and
keys and pressing the Select soft key.
Example: Changing the Display
Language
4. To
scroll through
the menus
Press the
or
key.
confirm the
chosen setting
Select or Save soft
key or the OK key.
return to the
previous menu level
Back, Cancel or
Exit soft key.
exit the menu without
changing
the settings
key or the
close soft key, if
available.
1. When the idle screen displays, press the
Menu soft key to access the menu.
The startup screen of the first menu,
Messages, displays.
3. To access the Phone menu, press the Select
soft key or OK key.
2. Scroll through the menus by pressing the
navigation keys until you reach the Settings
menu. To access the Settings menu, press
the OK key.
4. Scroll through the sub-menus until you reach
the Language sub-menu, by pressing the
If the menu that you have selected contains
further options, repeat the same procedure.
36
37
Z100.book Pages 38 - 39 Thursday, October 9, 2003 9:52 AM
Using Menu Functions
or
key and press the Select soft key or
the OK key.
5. Press the OK key when Screen Text
highlights.
Using Menu Functions
appropriate one is highlighted. Press the
Select soft key or the OK key.
7. Press the Save soft key to save the setting in
the Language screen. Otherwise press the
Cancel soft key.
8. Press the
key to exit the menu.
Accessing a Menu Function by
Using its Shortcut
6. Scroll through the list of languages by
pressing the
or
key until the
Some menus, sub-menus and options can be
quickly accessed by using their shortcut
numbers. Simply press the Menu soft key and
enter the number.
Note: The numbers assigned to each menu option
are indicated on the list on the next page.
38
They may not match the menu number on
the phone. It depends on the services
supported by your SIM card.
List of Menu Functions
Example: Accessing the Language menu option.
The following illustration shows the menu
structure available and indicates the:
1. Press the Menu soft key.
• number assigned to each option
2. Press
for Settings.
3. Press
for Phone.
4. Press
for Language.
• page on which you can find a description of
each feature
1. APPLICATIONS
2. CALL LOG
2.1
2.2
2.3
2.4
2.5
2.6
(see page 52)
All calls
Dialled calls
Missed calls
Received calls
Call cost
Call time
3. CONTACTS
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
(see page 55)
Search contact
Add contact
Groups
Speed dial
My info
Settings
Service number
Memory Status
39
Z100.book Pages 40 - 41 Thursday, October 9, 2003 9:52 AM
Using Menu Functions
4. INTERNET
(see page 62)
5. MESSAGES
(see page 67)
5.1 Create
5.1.1 Short msg.
5.1.2 Multimedia msg.
5.1.3 Media attach msg.
5.1.4 MMS postcard
5.1.5 MMS templates
5.1.6 Email
5.2 Inbox
5.3 Email box
5.4 Outbox
5.5 Drafts
5.6 Preset
5.7 Settings
5.8.1 Short msg.
5.8.2 Multimedia msg.
5.8.3 Email
5.8.4 Voice mail
5.8 Memory status
6. MY STUFF
40
(see page 82)
Using Menu Functions
7. ORGANISER
(see page 87)
7.1 Calendar
7.2 Today’s event
7.3 Schedule
7.4 Anniversary
7.5 To do list
7.6 Memo
7.7 World clock
7.8 Calculator
7.9 Converter
7.10 Alarm
8. PROFILES
8.1
8.2
8.3
8.4
8.5
9.3
9.4
9.5
(see page 94)
Normal
Meeting
Drive
Silent
Outdoor
9. SETTINGS
(see page 96)
9.1 Phone
9.1.1
9.1.2
9.1.3
9.1.4
9.1.5
9.1.6
9.2 Display
9.2.1
LCD brightness
Backlight
Language
Shortcuts
Active folder
Anykey answer
9.6
9.7
9.8
9.9
9.2.2 Wallpaper
9.2.3 Cover LCD
9.2.4 Main menu style
Call
9.3.1 Caller ID
9.3.2 Diverting
9.3.3 Barring
9.3.4 Waiting
9.3.5 Auto redial
9.3.6 Closed user group
Network selection
Security
9.5.1 Phone lock
9.5.2 SIM lock
9.5.3 PIN lock
9.5.4 Fixed dialling mode
9.5.5 Change phone password
9.5.6 Change PIN code
9.5.7 Change PIN2 code
Date & time
Own number
Memory status
Master reset
Greeting message
41
Z100.book Pages 42 - 43 Thursday, October 9, 2003 9:52 AM
Applications
Applications
Using the Application menu, you can use tool
applications and Java applications such as
games.
Application Explorer
• Instant message: allows you to set the URL for
instant messaging web client.
Using Application Explorer Options
On the application list, you can use the following
options by pressing the Options soft key.
Start: starts playing the application.
• Network access: (Only for the Downloaded
applications) allows you to set the access point
the downloaded application will use.
Instant Message
Delete: deletes the selected application.
In this menu, you can use several applications
provided by the factory default or downloaded
from Vodafone live! portal.
Using Applications
1. Press the or key to select an application
folder, Basic or Games & more.
2. Press the
or
key to select an
application.
3. Press the OK key to start the application.
Delete all: deletes the selected application
folder.
Rename folder: renames the application folder.
Move: allows you to move the selected
application to another folder.
New folder: makes a new application folder.
Enter a new name and press the Make soft key.
Press the OK key to change the text mode.
Download more: downloads more appication.
Memory status: views the memory status.
Settings: allows you to set the following.
• Download: allows you to set the network
settting for application downloading.
42
Taking a Picture
1. To turn on your camera, press the OK key in
the idle mode.
You can see the picture to be taken on the
display.
2. Point the camera at the subject- rotating the
camera if necessary.
Instant messaging is an on-line chatting service.
Make sure you set the Instant Message server
URL on the Settings option. If necessary, contact
the instant messaging web client for more
information.
Camera
Using the camera module built into your phone,
you can take pictures or record videos of people
or events. Additionally, you can send the images
to other people in a multimedia message.
To flip the picture over, press the Up or Down
volume key on the left side of the phone.
3. Press the OK key. Or, press the Options soft
key and press the OK key when Capture
highlights to take a picture.
When the camera turns on, you can dial a
number to make a video call; for further details
about using the video call feature, see page 29.
43
Z100.book Pages 44 - 45 Thursday, October 9, 2003 9:52 AM
Applications
Applications
4. The photo is saved automatically and then
To
Press the
use the options
Options soft key.
For details about the
options, see below.
delete the image file
Delete soft key.
return to the capture OK key.
mode
turn the camera off
key.
and return to the idle The photo is saved
mode
automatically.
When you press the Options soft key in Step 4,
the following options are available:
Capture viewfind: switches the screen to
the capture view mode to allow you to take
another picture.
Send
• By Multimedia msg.: allows you to send a
multimedia message using the taken
picture. For further details about sending
multimedia messages, see page 68.
44
• By Email: allows you to send an Email
using the taken picture.
Set to wallpaper: allows you to set the
taken picture as wallpaper.
timer icon appear at the top of the screen. When
you press the OK key, the phone takes a picture
after a predefined time.
Multi shot: takes multi shots.
Rename: allows you to change the image
file’s name. For more information about
entering characters, see page 31.
Open files: opens a file you want to open from
the Multimedia Images folder.
Exit: allows you to exit the camera menu.
Effects mode: allows you to change the colour
tone of the picture. Sepia, Mono, Night and
Normal are available.
You can see the pictures in the Images folder in
the My stuff; see page 83.
Capture Mode Options
Press the Options soft key in capture mode:
Capture: captures a picture.
Record mode: turns to video recording mode. If
you want to get an attachable video file to your
message, select the For message option.
Otherwise select the 10 Sec.
Flip image: selects Up-down for flipping
horizontally, Left-right for flipping vertically.
Brightness: displays the tool bar adjusting the
brightness of the picture.
Capture setting: sets default filename and
adjusts the capture quality choosing Low,
Normal, Fine, Super fine and Memory save. The
Memory save option let you get lower quality but
less memory usage.
Exit: returns to the idle mode.
Recording Video
You can use your phone just like a camcorder to
record what is currently displayed on the camera
screen and save it as a video file.
1. To turn on your camera, press the OK key.
You can see the picture to be recorded on the
display.
2. Press the Options soft key. Select Record by
pressing the
or
key and press the OK
key.
3. Your phone starts recording. Recording time
can be set for up to 30 seconds.
4. While recording video;
To
Press the
pause recording
Pause soft key.
resume paused
recording
Record soft key.
Timer: sets the phone to take a picture at a
predefined time. Once you set the time, the
45
Z100.book Pages 46 - 47 Thursday, October 9, 2003 9:52 AM
Applications
Applications
To
Press the
stop recording
Stop soft key.
The video
automatically saves in
the Videos folder.
use the options
Options soft key.
For details about the
options, see below.
delete the video file
Delete soft key.
return to the
recording mode
OK key.
turn the camera off
key.
and return to the idle The video is saved
mode
automatically.
Play file: allows to open a file from the
Image folder in the My stuff.
Send
• By Multimedia msg.: allows you to send
the video as part of a multimedia message.
For further details about sending
multimedia messages, see page 68.
• By Email: allows you to send the video as
part of an Email.
Open files: You can open the stored picture
files.
Rename: allows you to change the image
file’s name.
Exit: returns to the idle mode.
5. When the recording time expires, the phone
automatically saves the video in the Videos
folder in the My stuff; see page 84.
Record Mode Options
When you press the Options soft key in step 4
and 5, the following options are available:
Record: records video.
Viewfinder: switches the screen to the view
finder mode to allow you to take another
video.
46
Press the Options soft key in capture mode:
Capture mode: turns to the capture mode.
Record settings: adjusts the capture quality
choosing Low, Normal, Fine, Super fine and
Memory save. The Memory save option let you
get lower quality but less memory usage.
Exit: returns to the idle mode.
Media Player
Media Player plays audio and video files you
downloaded to the phone. You can listen to the
music or see a movie with the Media Player.
It is used when:
Playing a File using the Media Player
• you view a media file in the Multimedia
menu.
1. On the screen of the Media Player, press the
Options soft key.
• you want to play a sound or video in the WAP
browser.
2. Scroll to Open file and press the OK key.
The screen displays showing files available in
the Media Player.
3. Use the navigation keys to select the
category.
Flip image: selects Up-down for flipping
horizontally, Left-right for flipping vertically.
47
Z100.book Pages 48 - 49 Thursday, October 9, 2003 9:52 AM
Applications
Applications
4. Press the
or
key to select the file you
want to play and press the OK key or the
Select soft key.
The selected audio or video file plays on the
Media Player.
5.
Setting up the Media Player
You can set several options for playing an audio
or video file on the Media Player.
: winds forward the file.
To
Press the
When you press the Options soft key while a file
is playing, the following options are available:
pause
OK key.
Play: resumes playing.
resume playing
OK key again.
Pause: pauses playing.
Open file: allows you to open another file.
stop playing
Stop soft key.
adjust the volume
level
volume keys.
Open play list: allows you to make a file list you
want to play.
exit the Media
player
Exit soft key.
Player settings: allows you to change the
settings of the Media Player. For further details,
see next page.
When the control bar is showed, you can
press the
or
key to move cursors
through the buttons and press the OK key to
select the button.
: stops recording and save it.
: resumes recording.
48
: plays the file.
: rewinds the file.
VOD settings: sets the network access point for
the VOD(Video On Demand) service.
1. On the screen of the Media Player, press the
Options soft key.
Voice Memo
You can record sound files or listen to the
recorded sound files.
2. Press the
or
key to scroll to Player
setup and press the OK key.
3. Press the
or
key to scroll through the
options. You can select the desired status
using the and keys.
• Repeat: allows you to set the Media Player
to repeatedly play all of the files or only one
file. Selecting None means that the file is
played just once.
• Play order: allows you set the order
Random or Normal.
Press the
• Volume: allows you adjust the volume level
of the sound. This option is available only
when you have already opened a file.
Press the
or
key to move cursors through
the buttons and press the OK key to select the
button.
• Hide control bar: hides or displays the
control bar of the Media Player.
or
key to control the volume.
: starts recording or pauses recording.
: resumes recording.
: stops recording and saves it.
49
Z100.book Pages 50 - 51 Thursday, October 9, 2003 9:52 AM
Applications
Applications
: plays the file.
To download a file:
: rewinds the file.
1. On the file list in any category, press the
Options soft key. Press the
or
key to
select Download more and press the OK
key.
: winds forward the file.
Press Options soft key to use following options.
Record/Pause: starts or pauses recording.
Open files: opens a sound file.
Send: allows you to send the sound file as a
multimedia message or Email. For further details
about sending a message, see page 68.
Record settings: allows you to set the
recording file name and maximum recording
time.
7. When the display asks you if you want to play
the downloaded file, select the Yes soft key.
The Media Player screen opens and plays the
file.
Or, press the Down soft key from the startup
screen of the Applictaion menu.
2. The WAP browser opens and you are logged
onto the corresponding web server which
provides the downloading service.
3. When the display asks you if you want to
download a file, select the Yes soft key.
4. Select a file from the list and press the OK
key.
The display shows information about the file.
Downloading a New Application
You can download new applications from a preset
web server.
Before downloading, you need to check the
network and browser setting environment.
50
5. Press the Save soft key to download the file
to your phone.
6. If you want to continue downloading, press
the Confirm soft key. Repeat steps 4 and 5
as needed.
Otherwise, press the Exit soft key to stop
downloading. Proceed to the next step.
51
Z100.book Pages 52 - 53 Thursday, October 9, 2003 9:52 AM
Call Log
Call Log
In this menu, you can view:
• missed, dialled , received calls or all calls
Exit: exits this option menu.
2. Press the
or
want to view.
key to select the call you
• cost of your calls
• length of time of the call you have made or
received
3. To
All, Dialled, Missed, or Received
Calls (Menu 2-1~4)
1. From the Call records screen, press the or
key to scroll to the type of calls you want to
view.
Each time you press the key, a list of the call
records appears. Your phone records up to
the last 20 calls in each log.
If the number is saved in your contacts, the
corresponding name displays.
key.
When you press the Options soft key in the call
log list, the following options are available:
• This feature may not be shown depending on your
SIM card.
• This feature is not intended to be used for billing
purposes.
• AOC (Advice Of Charge) information may display
on call, depending on your SIM card or service
provider.
Detail: shows detailed information about the
call.
1. Press the
screen.
return to the
idle mode
key.
Save to contact: allows you to save the number
in your Contacts.
Delete: deletes the call.
Delete all: deletes all of the call records stored
in the current call log.
Call cost: allows you to check the cost of a call.
Call time: allows you to check the time of a call.
52
This feature lets you view the cost of calls.
Notes:
dial the number
Note: You can access the all calls list by pressing
the
key in the idle mode.
Press the
Call Cost (Menu 2-5)
or
key to scroll to the Call Cost
The display shows you the total cost, cost
limit and currency.
2. While viewing the call time, press the
Options soft key to use the following
options:
• Reset call cost: resets the cost counter;
you must enter your PIN2 (see page 112)
and then press the Confirm soft key.
• Edit cost limit: allows you to enter the
maximum cost that you authorize for your
calls; after entering the limit, you must
enter your PIN2 (see page 112) and then
press the Confirm soft key.
• Setup currency: allows you to set the
currency of the call cost; after changing the
currency, you must enter your PIN2 (see
page 112) and then press the Confirm soft
key.
• Missed calls: returns to the Missed calls
log screen.
• Dialled calls: returns to the Dialled calls
log screen.
• Received calls: returns to the Received
calls log screen.
Call Time (Menu 2-6)
1. Press the
or
key to scroll through the
call timer for each call type.
•
Total dialled: total time of the voice
calls you dialled.
•
Total received: total time of the voice
calls you received.
53
Z100.book Pages 54 - 55 Thursday, October 9, 2003 9:52 AM
Call Log
•
Total dialled: total time of the video
calls you dialled.
•
Total received: total time of the video
calls you received.
2. While viewing the call time, press the
Options soft key to use the following
options:
• Reset: resets the call timer.
Contacts
You can create a phonebook by saving phone
numbers and names. Your phone gives you an
easy way to make calls by using the phonebook
numbers and names.
• Dialled calls: goes to the dialled calls list.
• Received calls: goes to the received calls
list.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes, and other factors.
Search Contact (Menu 3-1)
Note: The options available may be different
depending on the memory you selected.
When you access this menu, the Contact Search
screen displays.
Details: shows the detailed information. For the
details of the Options, see page 58.
Enter the first few letters of the name you want
to search for. The contact entries are listed
alphabetically, starting with those closest to
matching your input.
Edit: edits the name or number of the contact.
3. If necessary, press the
the contact you want.
Delete: deletes the selected contact.
4.
To
dial the number
54
OK key.
When you press the Options soft key from the
Contacts list, the following options are available:
• Reset all: resets all of the call timers.
• Missed calls: goes to the missed calls list.
view details of the
contact.
or
key to find
Add: adds a new contact. For more information
about adding a contact, see page 56.
Search groups: searches the groups, see
page 59.
Press the
key.
Service number:
Send message: allows you to write a short
message or multimedia message. For more
55
Z100.book Pages 56 - 57 Thursday, October 9, 2003 9:52 AM
Contacts
Contacts
information about sending a message, see
page 67.
Adding a Contact in the Phone’s
Memory
V-Call: makes a video call to the person. For
further details, see page 29.
When you access this menu you can see the
startup screen of the Add contact menu. You can
also this screen by pressing the New soft key in
the main menu mode.
2. When you entered the information you want,
press the Options soft key and select the
Save option.
1. Press the
or
key to scroll through the
input boxes and enter the corresponding
information you want to save:
Adding a Contact in the SIM Card
Copy to phone: makes a copy of the contact to
phone.
Paste: pastes the number into the normal
dialling mode.
Add Contact (Menu 3-2)
You can add your phonebook by saving phone
numbers and the corresponding names in the
memories of your SIM card and phone. You can
save up to 1000 names in the phone’s memory.
Each name can have up to five numbers and
other personal information.
When you add a new contact, the contact is
saved in the memory you’ve selected in the
Memory location option.
• First Name/Last Name: enter the first and
the last name for the contact. For further
details about entering characters, see
page 31.
• Mobile( )/Home( )/Work(
)/
Fax( )/Etc( ) phone: enter a number
you want to add. The icons at the left side
of each input box tell what type of number
it is.
• Email address: enter the person’s Email
address.
• Group: press the OK key to enter one or
more groups.
• Homepage address: enter the URL
address of the person’s home page.
56
• Memo: enter information you need to
remember about the person.
1. Make sure that the Memory setting is set to
SIM.
2. Press the
key to move to the NAME input
box and enter a name for the contact.
3. Press the
key to move to the NUMBER
input box and enter a number.
4. Press the Save soft key to save the new
contact.
Adding a Contact in the Idle Mode
1. In the idle mode, enter the number to be
stored.
2. Press the Options soft key and press the OK
key when Save number highlights.
3. Press the
or
key to scroll through the
input boxes and enter the corresponding
information you want to save. The input
boxes are depends on the memory type you
select in the Memory setting and refer to the
previous pages to the next steps.
Another Options in Adding Contacts
List
When you press the Options soft key from the
Contacts list, the following options are available:
Save: saves the contact.
Special option: you can set a distinctive image
and sound for the contact. Press the
or
key to move to each field.
• Image: allows you to select an image to be
displayed when a call or message comes in
from the contact. Press the OK key and then
the Options soft key. You can select a
category from icon, animation and photo, and
then choose a file from the My stuff.
• Ringtone: allows you to set a sound to be
played when a call comes in from the contact.
Press the OK key and select an audio file from
the My stuff.
57
Z100.book Pages 58 - 59 Thursday, October 9, 2003 9:52 AM
Contacts
• Message Tone: allows you to select a sound to
be played when a message comes in from the
contact. Press the OK key and select an audio
file from the My stuff.
After changing the options, press the Options
soft key and select Save. If you want to reset
your changes, select Reset.
Contacts
Viewing Contact Information
Edit: allows you to edit the selected number and
name.
Groups (Menu 3-3)
You can access the details
of a contact in the phone’s
memory by pressing the OK
key on the Contact list.
Send message: allows you to send an short
message, multimedia message or Email. For
more information about sending a message, see
page 67.
You can manage caller groups. The contacts
stored in the phone’s memory or supplied by the
SIM card can be assigned to contact groups.
V-Call: allows you to make a video call to the
person. For further details, see page 29.
Editing Group from the Group List
Add item: allows you to add another contact
number. Select one of the types then the
selected contact item added on the contact.
Delete item: deletes the selecting contact item
which you’ve added using the Add item option.
Change type: changes the contact type of the
selected contact item. Select one of the types.
Mark/Unmark video call: marks or unmarks
the video call to the seleted contact number
item.
To
Press the
scroll through the
items
or
dial the selected
number
key.
key.
edit the
information
Save soft key after editing
each item..
return to the
contact list
Cancel soft key.
When you press the Options soft key, the
following options are available:
58
Special option: you can set a distinctive image
and sound for the contact. Press the
or
key to move to each field.
Copy: makes a copy of the contact to SIM or to
phone.
Send name card: allows you to send a name
card by short message, multimedia message or
Email.
Paste: allows you to paste the selected number
into the normal dialling mode.
1. When the Group list displays, if necessary
press the
or
key to scroll through the
Group list.
2. Press the Options soft key from the Group
list to access following options:
View names: views the contact list saved in
this group.
Add group:enters a new group name to add
a new group. You can see the group name in
the Group list.
Rename group:allows you to change the
group name.
Delete group:delete the selected group.
59
Z100.book Pages 60 - 61 Thursday, October 9, 2003 9:52 AM
Contacts
Contacts
Editing Group Item
1. When you select a group, you can see the
name list enrolled the group.
2. If necessary press the
through the name list.
or
key to scroll
3. Press the Options soft key to access
following options:
Details: veiws the detailed information
attached to the name.
Add member: allows you to add a new
member in the group. Mark and unmark
names you want to add using the OK key and
press the Save soft key.
Change member: allows you to change
members in the group. Mark and unmark
names you want to add or delete and press
the Save soft key.
Speed Dial (Menu 3-4)
Editing Speed Dial after Selecting
Speed Dial Number
Settings (Menu 3-6)
You can set up eight speed dial numbers and
then dial them simply by pressing the associate
number key.
1. Select one of the speed dial number from the
Speed Dial List by pressing the OK key.
Memory location: changes the default memory.
Select a memory from Phone and SIM and press
the Save key.
Editing Speed Dial from the Speed Dial
List
1. When the Speed Dial List displays, highlight
one of the Speed dial you want to edit by
pressing the navigation key.
2. Press the Options soft key to access
following options:
Add: allows you to add a new contact item
from the contact list.
Remove: allows you to clear the selected
speed dial number.
2. Search a contact item from the contact list
and press the Select soft key. It changes the
dial number for the selected speed dial.
My Info (Menu 3-5)
You can keep your information, such as your first
and last name, wireless phone number, home
number, office number, fax number, Email, URL,
memo or etc.
Copy all to phone: copies all the contact in SIM
card to phone memory. Select the Yes soft key
to copy them, otherwise select the No soft key.
Delete all: choose the memory location, Phone
or SIM to delete all. Select the Yes soft key to
delete selected memory, otherwise select the No
soft key.
Press the Options soft key to access following
options:
Save: saves your information.
Send name card: allows you to send a name
card by short message, multimedia message or
Email.
60
61
Z100.book Pages 62 - 63 Thursday, October 9, 2003 9:52 AM
Internet
Internet
Your phone comes equipped with a WAP
(Wireless Application Protocol) browser, making
it possible for you to access the Wireless Web.
The WAP browser allows you to access up-tothe-minute information using your phone but at
speeds faster than non-3G phones.
Using the Vodafone live!
You can take and send picture messages,
download and play the latest mobile games and
polyphonic ringtones, send and receive voice,
text and Emails, instant message with friends
and get the information they want.
Each time you start the WAP browser, the phone
connects to the Wireless Web and
or
icon animates to inform you that you are
connected to the Wireless Web. You will be billed
accordingly. Rates vary according to your service
option.
Navigating the WAP Browser
Launching the WAP Browser
1. Access the Internet menu (Menu 4).
To
Press the
scroll through
browser items
navigation keys.
2. A connection is established with your service
provider and the corresponding homepage
displays.
scroll up or down
pages
volume keys
3. To scroll through the screen, use the
navigation keys.
select the item
highlighted
OK key.
select a numbered
item
corresponding numeric
key.
return to the
previous page
Back soft key or
Options soft key and
History soft key.
return to the startup
homepage
Options soft key and
select the Go to
homepage menu
option.
Ending the WAP Browser
To exit the browser, simply press the
any time.
key at
Entering Text in the WAP Browser
When prompted, you can enter letters, numbers
or symbols the same way as in the phone mode.
See page 31 for more information about entering
characters.
Using the Browser Menu
In the WAP browser, press the Option soft key to
use the following options:
Go to homepage: takes you back at any time to
the homepage of the Wireless Web service
provider.
Open URL: allows you to manually enter the
URL address of the web page you want to access.
Add bookmark: allows you to add the current
page into your bookmark list.
View bookmark: shows you the bookmark list.
Send URL: allows you to send the URL by short
message, multimedia message or Email.
62
63
Z100.book Pages 64 - 65 Thursday, October 9, 2003 9:52 AM
Internet
Internet
Reload: reloads the current page with updated
information.
Using Bookmarks
Settings: allows you to change the settings for
connecting to the Wireless Web. For further
details, see page 65.
Bookmarks save you time by reducing the
number of steps it takes to access a web page.
You can bookmark many individual pages for
easy access at a later time.
Empty cache: clears information stored in the
cache, which is the phone’s temporary memory
used to store the most recently accessed web
pages. After you have accessed confidential
information requiring passwords like your bank
account, you need to empty the cache. When a
warning message appears, press the OK soft key
to clear the information.
Save image: saves the image of the current
page.
Disconnect: disconnects from the network.
History: shows URLs previously visited.
Exit: closes the WAP browser.
64
Bookmarking a Web page
1. Go to the page that you want to bookmark
and press the Options soft key.
2. Scroll to Add bookmark and press the OK
key.
3. Enter the title for the bookmark and press the
Save soft key.
2. Scroll to a bookmark item and press the OK
key.
OR
Press the number key corresponding to the
bookmark number.
Using Bookmark Options
On the bookmark list, press the Options soft key
to use the following options:
Go to homepage: sends you back to the home
page.
Go to: allows you to access the corresponding
web page.
Accessing a Bookmarked Web Page
Edit bookmark: allows you to change the title
and/or URL address of the selected bookmark
item.
1. Press the Links soft key on the startup
screen of the Internet menu.
Add bookmark: allows you to add a new
bookmark.
OR
Send URL: allows you to send the URL by short
message, multimedia message or Email.
Press the Options soft key on any web page.
Scroll to View bookmark and press the OK
key.
Delete: deletes the selected bookmark.
Delete all: deletes all of the bookmarks.
Settings: allows you to change the settings for
connecting to the Wireless Web. For further
details, see below.
Setting up the WAP Browser
Note: You do not need to change the settings
unless your network operator requests it. If
you change them without the operator’s
instructions, you may not be able to use the
WAP browser.
Contact your service provider for details and
parameters for each option.
To change the WAP settings:
1. Press the Options soft key on any web page.
2. Scroll to Settings and press the OK key.
3. Current access point setting is displays.
4. Scroll through the options by pressing the
or
key. Press the OK key to change the
setting.
• Setting Set: changes accessing point. You
can also edit the detailed information of it
65
Z100.book Pages 66 - 67 Thursday, October 9, 2003 9:52 AM
Internet
or make new Sets. For further details, see
below.
• Skip images: sets whether or not the
phone displays a web page’s image.
• Set security: (Only for WAP) set the security
option or not.
• Just fit to screen: sets whether or not the
web page fits to screen.
• Proxy address/Port:(Only for HTTP) enter the
porxy address or port.
• Rich site enable: sets whether or not
connects rich site.
Change name: changes the name of Set.
5. Press the Save soft key to save the changes.
To edit or make access points, select the Set you
want and press the Options soft key to use
following options.
Save: saves your changes.
Edit/New : edit selected Set or make a new Set.
The following items are shown.
• Access point: the default name should be
defined. You can change it using the Change
name option.
• Home URL: edit the home URL address.
• Protocol:select the network type, either HTTP
or WAP
66
• Gateway address/Port: (Only for WAP) enter
the address or port for the gateway.
Delete: deletes the selected Set when it is not in
use.
Messages
This menu allows you to create, send, read and
save messages with the Short Message Service
(SMS), Multimedia Message Service (MMS) and
Email.
SMS is a service which allows you to send or
receive a text message.
MMS is a messaging service very similar to a
SMS. MMS enables you to send far longer text
messages than SMS-and to attach images,
graphics, voice and audio clips-in any
combination, as a single multi media message.
You can send MMS messages to phones with
MMS capability, and to any Email address.
You can send a photo which you have just taken
as a normal postcard. Make a note that this
service is not supported in all Vodafone network.
Note: This messaging feature is only available if
your service provider’s network supports it.
Contact your service provider for more
information.
Create (Menu 5-1)
In this menu, you can write and send a short
message, a multimedia message or an Email.
Note: You can also press the
Create soft key from
the startup screen of
the Messages menu
to write a new
message.
Writing and Sending
Short Message
1. From the Write screen, press the Select soft
key when Short msg. highlights.
2. Write your message.
For more information about entering
characters, see page 31.
67
Z100.book Pages 68 - 69 Thursday, October 9, 2003 9:52 AM
Messages
3. If you want to use the Message options while
entering your message, press the Options
soft key. Select one of the following options:
• Use preset: allows you to use one of the
preset message stored in the Preset box;
for further details, see page 77.
• T9 language: selects one of the languages
you want to use.
• Save draft: saves the message as a draft.
You can access it later in the Drafts menu;
for further details, see page 76.
4. When you finish writing the message, press
the Options soft key and select the Send
option.
5. Enter a destination number in the To input
box.
• Send settings: allows you to change the
setting for the message transmission.
• Cancel: cancels editing and sending your
message.
6. To send the message to more than one
person, press the
key to move to another
To input box.
When you want to back to edit mode, press
the Back soft key.
7. When you finish setting the destinations,
press the Options soft key and select the
Send option to send the message.
Writing and Sending Multimedia
Message
If you want to use the following options, press
the Options soft key.
1. From the Write screen, select Multimedia
msg.
• Send: allows you to send the message.See
page 67.
2. Enter the subject in the Subject text field.
• Search: allows you to search your contacts
for a number. See page 55.
• Save draft: saves the message as a draft.
You can access it later in the Drafts menu;
for further details, see page 76.
68
Messages
To use a preset message stored in the Preset
box, press the Options soft key and select
the Use preset option.
3. To attach an image, video or audio file, press
the navigation key to move to the Image/
Video or Audio field and press the OK key.
Select a file from the list and press the Select
soft key.
• Save draft: saves the message as a draft.
You can access it later in the Drafts menu;
for further details, see page 76.
Note: When you add a video file in the
message, you can not add an audio file or write
text message. In this case you can add an audio
file or write text message after adding another
page.
• Edit page: allows you to use following
options.
Page timing: changes the playing duration
of current page.
Add page: adds a new page.
4. Enter your message into the Text field.
5. If you want to use the Message options while
entering your message, press the Options
soft key. Select one of the following options:
• Preview: shows your message as it will be
displayed on the recipient’s phone. Scroll
the message by pressing
or
key.
Press the Stop soft key and press the
Options soft key to use folllowing options.
Play: plays the preview mode.
Send: sends the message.
Page timing: changes the playing duration
of current page.
Colour & Font edit: press the Options soft
key and set the Font colour, Font style
and Back colour by pressing the or key.
Forward page: moves current page to next
page.
Backward page: moves current page to
previous pager.
Delete page: deletes a selected page. This
option is only available if when there is more
than one page.
• Save as template: saves the message as a
template. You can access it later in the
MMS template option, see page 72.
6. When you finish writing the message, press
the Options soft key and select Send option.
7. Enter a destination number in the To input
box.
If you want to use the following options, press
the Options soft key.
69
Z100.book Pages 70 - 71 Thursday, October 9, 2003 9:52 AM
Messages
• Send: allows you to send the message.See
page 67.
• Search: allows you to search your contacts
for a number. See page 55.
• Save draft: saves the message as a draft.
You can access it later in the Drafts menu;
for further details, see page 76.
• Send settings: allows you to change the
setting for the message transmission.
• Cancel: cancels editing and sending your
message.
8. To send the message to more than one
person, press the
key to move to another
To input box.
When you want to back to edit mode, press
the Back soft key.
9. When you finish the destinations, press the
Options soft key and select Send option to
send the message.
Messages
Writing and Sending Media Attach
Message
1. From the Write screen, select Media attach
msg. and press the OK key.
2. Enter the subject of your message.
For more information about entering
characters, see page 31.
3. Press the
contents.
key and enter your message
4. Press the
key to attach a media file and
press the OK key. The My stuff screen
displays.
7. When you finish selecting the files, press the
Options soft key and press the OK key when
Attach highlights. You can cancel your
selection by choosing Deselect all.
8. If you want to use the Message options while
entering your message, press the Options
soft key. Select one of the following options:
• Use preset: allows you to use one of the
preset messages stored in the Preset
menu.
• Clear attach: removes all selected
attached files.
• Attached file list: views attached file list.
• Save draft: saves the message as a draft.
You can access it later in the Drafts menu.
5. Select a media file by pressing the navigation
keys and press the OK key to select it. A
check mark appears in front the selected file.
9. When you finish writing the message, press
the Options soft key and select Send option.
6. Repeat step 5 to more than files. You can add
items up to 95 KB.
10.Enter a destination number in the To input
box.
• Search: allows you to search your contacts
for a number. See page 55.
• Save draft: saves the message as a draft.
You can access it later in the Drafts menu;
for further details, see page 76.
• Send settings: allows you to change the
setting for the message transmission.
• Cancel: cancels editing and sending your
message.
11.To send the message to more than one
person, press the
key to move to another
To input box.
When you want to back to edit mode, press
the Back soft key.
12.When you finish the destinations, press the
Options soft key and select Send option to
send the message.
If you want to use the following options, press
the Options soft key.
• Send: allows you to send the message.See
page 67.
70
71
Z100.book Pages 72 - 73 Thursday, October 9, 2003 9:52 AM
Messages
Writing and Sending MMS postcard
1. From the Write screen, press the Select soft
key when MMS postcard highlights.
2. When the Greeting msg field is highlighted,
press the OK key. Enter your message.
For more information about entering
characters, see page 31.
If you want to use the Message options while
entering your message, press the Options
soft key. Select one of the following options:
• Use preset: allows you to use one of the
preset message stored in the Preset menu;
for further details, see page 77.
• T9 language: selects one of the languages
you want to use.
Messages
4. When you finish writing the message, press
the Options soft key to use the following
options.
• Send: allows you to send the message.
Enter the detailed information of the
recipient such as, name, additional info,
street, zip& city, state/province and country.
When you want to back to edit mode, press
the Back soft key.
When you finish the destinations, press the
Options soft key and select Send option to
send the message.
• Save draft: saves the message as a draft.
You can access it later in the Drafts menu;
for further details, see page 76.
• Cancel: cancels writing your greeting
message.
Writing and Sending MMS template
Press the Save soft key to save the message.
1. From the Write screen, press the Select soft
key when MMS templates highlights.
3. To attach an image file, press the navigation
key to move to the Image field and press the
OK key. Select a file from the list and press
the Select soft key.
2. Select a MMS message template.
3. Press the Options soft key to use the following
options:
• View: views the selected MMS template.
• Edit: edits the selected MMS template like
you edit the MMS message. After you edit it
you can send it like you send the MMS
message. See page 72.
• Delete: deletes the selected MMS template.
Writing and Sending Email
1. From the Write screen, press the Select soft
key when Email highlights.
2. Enter the subject of your message.
For more information about entering
characters, see page 31.
3. Press the
contents.
key and enter your message
8. If you want to use the Message options while
entering your message, press the Options
soft key. Select one of the following options:
• Use preset: allows you to use one of the
preset message stored in the Preset menu;
for further details, see page 77.
• T9 language: selects one of the languages
you want to use.
• Attached file list: views attached file list.
• Clear attach: remove all selected attach
files.
• Save draft: saves the message as a draft.
You can access it later in the Drafts menu.
4. Press the
key to attach a media file and
press the OK key. The My stuff screen
displays.
9. When you finish setting the destinations,
press the Options soft key and select Send
option to send the message.
5. Select a media file by pressing the navigation
keys and press the OK key to select it. A
check mark appears in front the selected file.
10.Enter a destination number in the To input
box.
6. Repeat step 5 to more than files.
72
7. When you finish selecting the files, press the
Options soft key and press the OK key when
Attach highlights. You can cancel your
selection by choosing Deselect all.
If you want to use the following options, press
the Options soft key.
73
Z100.book Pages 74 - 75 Thursday, October 9, 2003 9:52 AM
Messages
• Search: allows you to search your contacts
for a number. See page 55.
• Send: allows you to send the message.See
page 67.
• Save draft: saves the message as a draft.
You can access it later in the Drafts menu;
for further details, see page 76.
Messages
Inbox (Menu 5-2)
Press the Options soft key to use the following
options are available; the options may be
different depending on the message type:
When you receive a new text message, the New
Message icon displays according to the type of
message.
View: shows the message, or retrieves MMS
data if the message is MMS notification message.
•
: SMS message
Reply: allows you to reply to the sender.
• Send settings: allows you to change the
setting for the message transmission.
•
: SMS SIM message
•
: MMS message
Forward: allows you to send the message to
other people.
• Cancel: cancels writing Email.
•
: MMS notification message
•
: Email message
•
: Email attach message
•
: Voice message
11.To send the message to more than one
person, press the
key to move to another
To input box.
When you want to back to edit mode, press
the Back soft key.
12.When you finish the destinations, press the
Options soft key and select Send option to
send the message.
•
: Configuration message - network
configuration informaiton message.
When you access the Inbox menu option (Menu
5-2), the list of messages received displays with
the message size, sender’s address and message
subject.
Scroll to the message you want to view and press
the OK key. The message displays. In case of
MMS notificaiton msg, retrieves MMS message.
Call sender: allows you to call the sender’s
number.
Save address: allows you to save the sender’s
phone number or Email address.
Save medias: allows you to save the contents.
Detail info: shows detailed information about
the message. This option is shown only for MMS
messages.
Email Box (Menu 5-3)
When you access the Email inbox menu, the list
of messages received displays with the message
size, sender’s address and message subject.
Scroll to the messsage you want to view and
press the OK key. The message displays.
Press the Options soft key to use the following
options are available; the options may be
different depending on the message type:
View: shows the message.
Reply: allows you to send a reply message to
the sender.
Forward: allows you to send the message to
other people.
Delete: deletes the message.
Download: receives new messages or all
messages.
Delete all: deletes all of the messages in the
Inbox menu.
Detail info: shows detailed information about
the message.
Delete: deletes the message.
Delete all: deletes all of the messages in the
Email inbox.
74
75
Z100.book Pages 76 - 77 Thursday, October 9, 2003 9:52 AM
Messages
Outbox (Menu 5-4)
This menu stores the messages that you have
sent.
When you access the Outbox menu, the list of
messages you have sent displays with the
message subject, recipient’s address and
message size.
Scroll to the message you want to review and
press the OK key. The message contents display.
Press the Options soft key to use the following
options are available; the options may be
different depending on the message type:
View: shows the message.
Forward: allows you resend the message to
other people.
Call sender: allows you to call the sender’s
number.
Save address: allows you to save the sender’s
phone number or Email address.
Save medias: allows you to save the contents.
Messages
Preset (Menu 5-6)
Settings (Menu 5-7)
Delete: deletes the message.
After you create new preset messages and you
can add them to your message.
In this menu, you can set up default information
for using the messaging features.
Delete all: deletes all of the messages in the
Oubox menu.
When you access the Preset menu, the preset
message list displays.
Press the
or
key to scroll to a message
type and press the Select soft key.
Detail info: shows detailed information about
the message. This option is shown only for
Multimedia and Email messages.
Drafts (Menu 5-5)
In this menu, you can read, edit and send the
messages you saved as drafts. If a message was
not sent successfully due to some error, it is also
stored in the Drafts box.
When you access the Drafts menu, the list of
messages you have saved displays with the
recipient’s address, message subject, if you
entered it, and message size.
Scroll to the message you want to view and press
the OK key. The message contents display.
Press the Options soft key to use options. The
options may be different depending on the
message type.
Scroll to the message you want to use by
pressing the
or
key and press the OK key.
You can change the message. For more
information about entering characters, see
page 31.
Press the Options soft key to use the following
options:
Edit: allows you to change the message.
Send: allows yo to send the message. For
further details about sending a message, see
page 67.
New: allows you to add a new preset message.
When you already saved ten messages, this
option is disabled.
Delete: deletes the message.
Setting for Short Message
You can have serveral settings. Each setting has
following options.
Centre address: allows you to view the number
of your SMS centre required when sending
messages.
Expiration: allows you to set the length of time
for which your text messages are stored at the
message server while attempts are made to
deliver them.
Default type: allows you to set the default
message type.
Name: allows you to set the setting’s name.
There are following options in Common setting.
Delete all: deletes all of the preset messages.
76
77
Z100.book Pages 78 - 79 Thursday, October 9, 2003 9:52 AM
Messages
Reply path: allows you to set your SMS centre
number as a reply path so that the recipient can
send a reply through it. The charge is billed to
you.
Delivery report: the network informs you
whether or not your message has been delivered.
Preferred bearer: allows you to select
preferred data transmission method.
Leave a copy: your phone leaves a copy of your
message in the Outbox menu after sending it.
Setting for Multimedia Message
You can change the settings for sending or
receiving MMS messages.
Send settings
• Priority: allows you to change the priority
level of your messages.
• Expiration: allows you to specify how long
your MMS centre stores your messages after
sending them.
• Delivery: allows you to set when the message
will be sent.
78
Messages
• Hide address: when this option is checked,
your address does not display on the
recipient’s phone.
• Delivery report: when this option is checked,
the network informs you whether or not your
message has been delivered.
• Read report: when this option is checked,
your recipient’s phone sends a reply to let you
know when your message was read by him or
her.
• Leave a copy: when this option is checked,
your phone leaves a copy of your message in
the Outbox menu after sending it.
• Add my namecard: (Only for the Medial
attach format) when this option is checked,
your contact information is attached to your
message. This option is not available when you
send a message using a preset format.
• Add signature: (Only for the Medial attach
format) this option is checked, your signature
text is attached to the end of your message.
You can enter text using up to 128 characters.
This option is not available when you send a
message using a preset format.
Receive settings
Network settings
• Home network/Roaming network: allows
you to set how to receive a message in each
network.
You can set up information about your MMS
network. In most cases, you don’t need to
change the settings. For further details, contact
your service provider.
Auto: you can receive the multimedia message
automatically.
Manual: you can receive the notification
message first.If you want to download it, you
can receive the multimedia message.
Note: If you change these settings without the
network operator’s instructions, you may not
be able to send or receive multimedia
messages.
Restirct: (Only for Roaming network): if you
select the notification, it aware of possible
additional charing to roaming, if you want to
download the message or not.
You can have several network settings. You can
make, change or rename for each setting by
pressing the Options soft key. But only one
setting can be active as your network setting.
• Delivery report: when this option is checked,
the network informs the sender of the
message whether or not the message has been
delivered.
• Read report: when this option is checked,
your phone sends a reply to let the sender
know when the message was read.
• Anonymous reject: when this option is
checked, your phone rejects messages without
a caller ID.
Press the OK key to edit following options:
• Access point: allows you can choose a
network account.
• MMS server URL: allows you can edit the
MMS server address.
• Protocol: allows you to select the protocol
between WAP and HTTP.
• Gateway address/Port: (Only for the WAP
protocol) allows you to set the gateway
address and port.
79
Z100.book Pages 80 - 81 Thursday, October 9, 2003 9:52 AM
Messages
• Proxy address/Port: (Only for the HTTP
protocol) allows you to set the proxy server
address and port.
Messages
Receive settings
The following options are available:
• Receiving option: allows you to set how to
receive a message.
Setting for Email
You can change the settings for sending or
receiving Email messages.
Send settings
The following options are available:
• From: allows you to set the alias name.
• Priority: allows you to change the priority
level of your messages.
• Leave a copy: when this option is checked,
your phone leaves a copy of your message in
the Outbox menu after sending it.
• Add my namecard: when this option is
checked, your contact information is attached
to your message.
• Add signature: when this option is checked,
your signature text is attached to the end of
your message. You can enter text using up to
128 characters.
80
Only subject: receives only the subjects of the
Emails. You can read the contents after
downloading.
Normal: receives Emails both subject and
contents.
• Reject if over: allows you to set the
maximum size of Email and reject Email when
it is over the size.
• Block address: allows you to block Emails
from the addresses you set.
• Account name: allows you to edit the access
name.
Setting for Voice Mail
• Access point: allows you can change the
server address.
You can change the number of the voice mail
service centre. When you press the 1 key to
access your voice messages, your phone dials
this number.
• SMTP server: allows you to set the
SMTP(Simple Mail Transfer Protocol) server
address.
• POP3 server: allows you to set the POP3
server address.
• User name: allows you to set the login name
of the server.
• Password: allows you to set the login
password of the server.
Memory Status (Menu 5-8)
You can check the memory staus of each
message box in Phone memory or in SIM card.
To change the memory, press the Phone/SIM
soft key.
• Block subject: allows you to blcok Emails
contains the subjects you set.
Network settings
you can have 3 Email accounts. You can edit only
2nd and 3rd account.
Select one of the account by pressing the OK key
and press the Options key. And press the Edit
soft key to edit following options.
81
Z100.book Pages 82 - 83 Thursday, October 9, 2003 9:52 AM
My Stuff
My Stuff
Detail Info: shows the detail information of
selected file.
Using the Images Files
You can use bmp, gif, png, jpg or tiff image files.
You can enjoy various multimedia files, such as
sounds, video, and pictures using the Media
Player.
Exploring the Multimedia Files
You can use up to 5 categories of multimedia
files: Images, Videos, Music, Sounds, Etc..
When you press the OK key, the list of the files in
the selected category displays.
Using Multimedia Options
On the file list in any category, you can use the
following options by pressing the Options soft
key:
View/Play: shows or plays the selected file.
Delete: deletes the selected file.
Delete all: deletes all of the files.
82
Rename: allows you to change the file name.
For further details about entering characters, see
page 31.
Move: allows you to move the selected file to
another folder.
New folder: allows you to make a new folder for
storing multimedia files.
Download setting: The following options are
available:
• Access point: allows you can choose a
network account.
• Server URL: allows you can edit the server
address.
• Protocol: allows you to select the protocol
between WAP and HTTP.
Download more: allows you to download new
files from the web server. For further details, see
page 50.
• Gateway address: (Only for the WAP
protocol) allows you to set the gateway
address.
Send: allows you to send the selected file via
multimedia message or Email.
• Proxy address: allows you to set the proxy.
Set to wallpaper: (only for the Images
category) allows you to use the image as your
wall paper image ie as the background for your
idle screen.
Set to ring tone:(only for the Sounds category)
allows you to use the sound as your ringtone.
Memory status: shows you the amount of
memory used by the current category and the
remaining memory.
Viewing an Image
1. Press the
or
key to select the Images
category. Image list displays.
2. Press the
or
key to select an Image
and press the OK key.
3. The Image viewer shows the selected file.
Press the
or
next image file.
key to load previous or
When viewing an image, you can use the
following options by pressing the Options soft
key:
Delete: deletes the file.
Send: allows you to send the image via
multimedia message or Email. For further details
about sending a message, see page 67.
Rename: renames the file.
83
Z100.book Pages 84 - 85 Thursday, October 9, 2003 9:52 AM
My Stuff
Set to wallpaper: allows you to use the image
as your wallpaper image, ie as the background
for your idle screen.
Add to contact: allows you to use the image as
a caller ID indicator to be displayed when a call
comes in from a contact.
Real size: shows you information about the file
size.
Slide show: allows you to view all of the images
in the selected folder using the Slide Show
feature, which shows the images one by one on
full screen at 3 second intervals.
Detail info: shows detailed information about
the file, such as file name, size, type and many
others.
My Stuff
Using the Video Files
Usig the Music Files
Your phone can play video files in avi, mov or
mpg format.
Your phone can play music files in mp4 format.
Playing a Video File
1. Press the
or
key to select Videos
category. The video list displays.
2. Press the
or
key to select a video file
and press the OK key.
3. The Media Player plays the selected file.
For further details about using the Media
Player, see page 47.
Creating a Video
Creating a New Image
From the file list of the Videos category, select
Create new and press the OK key.
From the file list of the folder, select Create new
and press the OK key
For further details about recording video,
referring to page 45.
For further details about using camera, referring
to page 43.
Playing a Music File
Using Sounds and Tones
1. Press the
or
key to select Music
category. The music list displays.
You can use 4-chord melodies or tones.
2. Press the
or
key to select a music file
and press the OK key.
3. The music plays.
Press the
or
Press the
or
next music file.
key to control the volume.
key to load previous or
When playing a music, you can use the following
options by pressing the Options soft key:
Send: allows you to send the music as a
multimedia message or Email. For further details
about sending a message, see page 67.
Delete: deletes the file.
Rename: renames the file.
Set to ring tone: allows you to use the music as
your ringtone.
84
Detail info: views the type, size, etc of the
selected file.
1. Press the
or
key to select Sounds.
2. Press the or key to scroll through the sub
folders; Sounds, Ringtones, and
Recording.
3. Press the
or
key to select a file and
press the OK key.
4. The music plays.
Press the
or
key or volume key to
control the volume.
Press the
next file.
or
key to load previous or
While playing a sound, you can use the following
options by pressing the Options soft key:
Send: allows you to send the sound as a
multimedia message or Email. For further details
about sending a message, see page 67.
85
Z100.book Pages 86 - 87 Thursday, October 9, 2003 9:52 AM
My Stuff
Delete: deletes the file.
Organiser
Rename: renames the file.
Set to ring tone: allows you to use the sound or
melody as your ringtone.
Detail info: views the type, size, etc of the
selected file.
Creating a Sound
1. From the Sounds category, select
Recordings sub folder and select the Create
new and press the OK key.
2. Voice memo screen displays.
For further details about using the Voice
memo screen, see page 49.
The organiser feature allows you to view the
current month as well as the past or future
month in calendar format. You can schedule up
to 100 events in total.
• Press the OK key to access the highlighted
date.
Calendar (Menu 7-1)
The calendar of this month
displays with today’s date
highlighted.
Days with any events are
marked with a coloured
symbol, green for schedule
items, red for anniversary,
blue for to do list, and
orange for memo.
To scroll through the calendar:
• Press the
or
key to move to the
previous or next week.
• Press the or
or next day.
86
• Press the volume keys to move to the previous
or next month. You can also press the or
key when the title bar showing the month and
year highlights.
key to move to the previous
You can use the following options by pressing the
Options soft key:
View: shows you the schedule of the selected
day.
New: allows you to make a new Schedule,
Anniversary, To do list or Memo.
Month view: returns to the calendar screen.
Reschedule: allows you to change the schedule
easily. When the calendar displays, move to new
start date using the navigation keys and press
the OK key.
Delete: deletes the events the period you enter.
Delete all: deletes all of the events in your
calendar.
87
Z100.book Pages 88 - 89 Thursday, October 9, 2003 9:52 AM
Organiser
Send schedule: allows you to send the schedule
by short message, multimedia message or Email.
Organiser
Schedule (Menu 7-3)
Today’s Event (Menu 7-2)
Press the Options soft key and select the New
option to make a new schedule. See page 88 for
another options.
When you press the Options soft key, the
following options are available; these may be
different depending on the selected event type:
1. Scrolling through the entry fields by pressing
the
or
key. Enter the required
information or select the desired settings.
View: shows you details of the event.
New: allows you to make a new Schedule,
Anniversary, To do list or Memo.
Month view: returns to the calendar screen.
Reschedule: allows you to change the schedule
easily. When the calendar displays, move to a
new start date using the navigation keys and
press the OK key.
Delete: deletes the event.
Delete all: deletes all of the events on that day.
Send schedule: allows you to send the schedule
by short message, multimedia message or Email.
See how to make each type’s event.
88
• Title: enter the title of the event. See
page 31 for more information about
entering characters.
• Details: enter the details about the event.
• Start: enter the start time of the event.You
can move the cursor using the and
keys.
• End: enter the end time of the event in the
same way as entering the start time.
• Start date: enter the start date. You can
move the cursor using the and keys.
• End date: enter the end date in the same
way as entering the start date.
• Location: enter information about the
location for the event.
• Alarm: press the OK key to set an alarm to
remind you of the event. Then set when the
alarm will alert you before the event starts;
enter the desired number and select a unit,
min, hour, day, or week, using the and
keys.
• Occasion: enter the information about the
occasion. See page 31 for more information
about entering characters.
• Repeat: if you are entering a recurring
event, press the OK key and select a repeat
option using the and keys. Then enter
the date until which the event recurs.
• Alarm: press the OK key to set an alarm to
remind you of the event. To set an alarm
ahead of the day required, enter the desired
number and select a unit, day, week or
month, using the and keys. Enter the
time. You can move the cursor using the
and keys.
• Expiry: select how long the event is stored
in your calendar.
2. When you finish entering the event, press the
Save soft key.
Anniversary (Menu 7-4)
Press the Options soft key and select the New
option to make a new anniversary. See page 88
for another options.
1. Scrolling through the entry fields by pressing
the
or
key. Enter the required
information or select the desired settings.
• Date: enter the start date and the end
date. You can move the cursor using the
and keys.
• Repeat every year: press the OK key to
mark or unmark this option.
2. When you finish entering the anniversary,
press the Save soft key.
To Do List (Menu 7-5)
When you press the Options soft key and select
the New option to make a new item of To do list.
89
Z100.book Pages 90 - 91 Thursday, October 9, 2003 9:52 AM
Organiser
1. Scrolling through the entry fields by pressing
the
or
key. Enter the required
information or select the desired settings.
• Task: enter the information about the
occasion. See page 31 for more information
about entering characters.
• Start date: enter the start date. You can
move the cursor using the and keys.
• Due date: enter the due date.
• Priority: enter the priority choosing 1,2
and 3.
2. When you finish entering the To do list, press
the Save soft key.
When you finish one from the To do list, select
the item and press the Options soft key.
Organiser
Memo (Menu 7-6)
World Clock (Menu 7-7)
When you press the Options soft key and select
the New option to make a new memo. See
page 88 for another options.
You can check the time difference between your
city and the selected city.
1. Enter the first figure using the number keys.
To use a decimal point, press # key.
1. Scrolling through the entry fields by pressing
the
or
key. Enter the required
information or select the desired settings.
• Memo description: enter the memo
details.
• Date: enter the date.
2. When you finish entering the memo, press
the Save soft key.
1. Select the city corresponding to your time
zone by pressing the and key.
The screen shows the current date, time and
the several cities in the same time zone.
2. Press the
key to select the other city and
corresponding time zone by pressing the
and key.
3. Press the Save soft key to save the setting.
Otherwise press the Cancel soft key.
2. Press an appropricate navigation key for your
calculation.
3. Enter the second figure.
4. Press the OK key to get the result.
Press the Options soft key to following options.
Recent calculation: shows the recent
calculation.
Memory save: saves the current digit or result
to the memory.
Memory recall: recalls the saved digit.
Calculator (Menu 7-8)
Select the Done to check a done mark in front of
the item.
Memory clear: clears the memroy.s
You can use the phone as a 14-digits calculator.
The calculator performs basic mathematical
functions: additional, subtraction, multiplication
and division.
90
91
Z100.book Pages 92 - 93 Thursday, October 9, 2003 9:52 AM
Organiser
Organiser
Converter (Menu 7-9)
To change the currency rates;
You can convert from one type of unit to another.
1. Select the base currency by pressing the
and key.
Scroll to the type of converter to be performed
from Currency, Length, Weight, Volume,
Area, and Temperature and press the OK key.
1. Select the units to be converted and required
by pressing the and key.
2. Whenever you enter the value to be
converted or required, you can see the
corresponding value of each unit.
2. Scroll through another currency by pressing
the
or
key and edit the rates.
3. Press the Options soft key and select the
Save option to save it.
Clear: clears the current values.
Reverse: reverses the location of converted and
required unit.
Currency rates: (Only for Currency): sets the
currency rates.
Note: When the Silent mode is activated, the alarm
tone doesn’t sound except the Wake up
alarm.
To release an alarm;
Return to the previous screen without
changing, press the Cancel soft key.
1. Select the type of alarm choosing Once
alarm, Daily alarm or Wake up alarm.
2. Set Off by pressing the
and
key.
Alarm (Menu 7-0)
3. Press the Save soft key to save it.
You can set alarms to ring at specific times.
To set an alarm;
1. Select the type of alarm choosing Once
alarm, Daily alarm or Wake up alarm.
2. Set On by pressing the
and
key.
3. Move to time field by pressing the
92
5. Press the Save soft key to save it.
To clear all the rates of each currency, select
the Clear all option.
Note: You can enter a decimal point(.) by
pressing the # key.
At the convering screen press the Options soft
key to following options.
4. (Only for the Wake up alarm) Move to Repeat
field by pressing pressing the
key and
select the repetition type choosing None,
Every day, Except weekend, or Except
sunday. Select the alert tone, too.
key.
93
Z100.book Pages 94 - 95 Thursday, October 9, 2003 9:52 AM
Profiles
Profiles
¥ou can change the settings for several sound
modes.
Setting up Sound Modes
1. From the startup screen of the Profiles menu,
press the OK soft key.
2. Select a mode from Normal, Meeting,
Drive, Silent and Outdoor by pressing the
or
key and press the Options soft key
and Customize.
3. The available options are vary depending on
the selected mode.
• Ring tone: enables you to select a melody
or tone to be used when you select Melody
or Vibration & melody in the Call alert
type option. Press the OK key and select a
sound from the file list.
Call connect tone: sets the phone to beep
when the person you are calling answers the
phone.
Call end tone: sets the phone to beep when
your call ends.
• Tone volume: allows you to adjust the
volume level of the sounds.
Power on: sets the phone to beep when the
phone is switched on.
• Msg. alert type: allows you to select the
alert type for the message ringer.
Effect sounds: sets the phone to beep when
you access the menu facilities.
• Msg. alert tone: allows you to select a
melody or tone to be used when you select
Melody or Vibration & melody in the
Msg. Alert type option. Press the OK key
and select a sound from the file list.
Press the
or
key to scroll through the
sound options. Change the settings using the
and keys.
• Effect tones: allows you to turn the alert
sounds on or off. Press the OK key to place
or remove a check mark.
The following options are available:
Popup box alerts: sets the phone to inform
you when you have made a mistake.
• Call alert type: allows you to select the
alert type for the call ringer. You can choose
94
one among Melody, Mute(Light only),
Vibration & melody and Vibration.
Minute minder: lets you set the phone to
beep every minute during an outgoing call to
keep you informed of the length of your call.
Folder open/close: sets the phone to beep
when you open or close the phone.
Press the Change soft key to save the
setting.
• Alert tones: allows you to select a tone
type for the feedback alerts. Press the OK
key and select a type. Then press the
Options soft key to use the following
options.
Select: selects the selecting tone.
Listen all set: listens all alert tones. Select a
alert tone from the list and press the Play
soft key to listen it.
• Key tones: allows you to select a tone
which sounds when you press a key.
• Key tone volume: allows you to adjust the
volume level of the keypad tone.
4. When you finish setting the options, press the
Save soft key.
Switching the Sound Mode
1. From the Profiles start up screen, press the
Change soft key. Press the
or
key to
select the mode you want to use and press
the OK key.
Or, from the Profiles menu, select the mode
you want to use and press the OK key.
The phone displays “Profile changed.”
Note: You can quickly switch to the silent mode by
key down in the idle mode.
holding the
To switch back to the previous sound
mode, hold the key down again.
95
Z100.book Pages 96 - 97 Thursday, October 9, 2003 9:52 AM
Settings
Settings
Many different features of your phone can be
customised to suit your preferences in the
Settings menu.
Shortcuts
your phone is in dimmed mode or screen off, you
can wake up by pressing anykey. Selecting
Always on means that the phone does not use
dimming mode and the screen is always on.
You can set the navigation keys can be used as
shortcut keys to the menu functions you use
most frequently. In the idle mode, they allow you
to access specific menu options directly.
Phone (Menu 9-1)
Language
1. Press the each navigation key to check the
current funtion assigned, and select a navigation key.
In this menu, you can set options for the phone.
You can select a different language for the
display text and the text input mode.
2. Press the Options soft key to use following
options.
LCD Brightness
1. Press the OK key in the Screen Text field.
You can adjust the brightness of the screen.
Press the or key to make the screen darker
or brighter and press the Save soft key.
2. Press the
or
key to select a language
for the display text, such as menu names and
warning or confirming messages, and press
the Select soft key.
Backlight
3. Press the
key to move to the Input T9
field and press the OK key.
YYou can set the timer to go to dimming mode
when no key is input, which consumes less
battery power. To use the backlight, select the
length of time the phone waits before it dimmes
the screen after the last key is pressed. After
phone goes to dimming mode, the phone will
turn the screen off a few minutes later. When
96
4. Press the
or
key to select a language
for the T9 input mode and press the Select
soft key.
5. Press the Save soft key.
Assign/Change: assigns or changes a
funtion of the selected navigation key.
Select a function from the function list and
press the Select soft key to select it.
Remove: removes the menu funtion of the
selected navigaiton key.
Remove all: removes all the functions
assigened to the navigation keys.
Active Folder
When it is set to Off, you must open the folder
and press a key, depending on the setting of the
Anykey Answer opion.
Press the
or
key to select On or Off, and
press the Save soft key.
Anykey Answer
When this option is set to On, you can answer an
incoming call by pressing any key except the
key and the Reject soft key.
When this option is set to Off, you can only press
the
key or the Accept soft key to answer.
Press the
or
key to select On or Off, and
press the Save soft key.
Display (Menu 9-2)
This menu allows you to customise the main
display screen by setting a greeting message or
wallpaper image or changing the theme colour.
When this option is set to On, you can simply
open the folder to answer a call.
97
Z100.book Pages 98 - 99 Thursday, October 9, 2003 9:52 AM
Settings
Greeting Message
Settings
2. Press the
or
you want to use.
key to scroll to the image
You can set a greeting message to be displayed
briefly when you switch the phone on.
3. Press the Save soft key.
1. When Greeting message highlights in the
Display menu, press the Select soft key.
Cover LCD
The current message displays.
2. Press the C key to clear the message.
3. Enter a new message.
For more information about entering
characters, see page 31.
4. When you finish entering the message, press
the Save soft key.
Caller ID
You can select what the external display shows in
the idle mode.
2. Select the type of diverting required by
pressing the
or
key, and then press
the OK key.
Always: all calls are diverted.
Note: Some networks do not allow the user to
change this setting.
Digital clock: a digital clock showing current
time and date appears on the screen.
The following options are available:
Busy: calls are diverted if you are already
making another call.
By network: the default setting provided by the
network is used.
No reply: calls are diverted if you do not
answer the phone.
Send: your number is sent each time you make
a call.
Unreachable: calls are diverted if you are
not in an area covered by your service
provider.
Cover title: you can enter a greeting message.
For more information about entering characters,
see page 31.
Wallpaper
1. Select Wallpaper in the display menu using
the
or
key, and press the Select soft
key. Or you can also the Wallpaper soft key
from the Settings startup screen.
You can prevent your phone number from being
displayed on the phone of the person being
called.
1. Select the type of calls from Voice call, Data
call and Video call to be diverted by
pressing the
or
key, and then press
the OK key.
The following options are available:
Image: you can select an image.
You can select a background image (wallpaper)
to be displayed on the idle screen.
Call (Menu 9-3)
Main Menu Style
You can change the style of displaying main
menu.
Hide: your number is not displayed on the other
person’s phone.
Diverting
This network service enables incoming calls to be
rerouted to the number that you specify.
To set your call diverting options:
Cancel all: all call diverting options are
cancelled.
The phone dials your network to find whether
call diverting is possible or not.
After a few minutes, the current status
displays. If the option has already been set,
The Images folder of the My stuff opens.
98
99
Z100.book Pages 100 - 101 Thursday, October 9, 2003 9:52 AM
Settings
the numbers to which the calls are diverted
also displays.
3. Press the or key to select one of the
following options:
• Activate: your network has the number
already registered, but it is not activated.
This option activates the number.
• DeActivate: the selected call diverting
option is currently active. This option
deactivates the call diverting.
• Registration: there is no number specified
or registration record for call diverting in
the network. You first need to register a
number.
• DeRegistration: you can deregister the
number already registered in the network.
4. Press the
key and enter or change the
number where you want to divert the calls.
5. Press the Request soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
Settings
Barring
The Call Barring network service allows you to
restrict your calls.
To set your call barring options:
1. Select the type of calls from Voice call, Data
call and Video call to be diverted by
pressing the
or
key, and then press
the OK key.
2. Select the type of diverting required by
pressing the
or
key, and then press
the OK key.
All outgoing international: international
calls cannot be made.
All outgoing international except
home: when abroad, calls can be made only
to numbers within the current country and to
your home country, which is the country
where your home network operator is located.
All outgoing: calls cannot be made.
All incoming when roam: calls cannot be
received when you are using your phone
outside of your home service area.
The phone dials your network to find whether
call diverting is possible or not.
After a few minutes, the current status
displays.
3. Press the or key to select one of the
following options.
• Activate: The selected call barring option is
not activated. Selecting this option activates
your setting.
• DeActivate: The selected call barring
option is currently active. Selecting this
option deactivates your setting.
4. Press the
key and enter your call barring
password supplied by your service provider.
5. Press the Request soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
Changing the Barring Password
You can change the call barring password
obtained from your service provider.
1. From the barring menu screen, press the
Options soft key and select the Change
password option.
2. Enter the current password in the Old input
box.
3. Press the
key and enter a new password.
4. Press the
key and enter the new password
again to confirm it.
5. Press the Save soft key.
Waiting
This network service informs you when someone
is trying to reach you when you busy with
another call.
To set your call waiting options:
1. Select the type of calls from Voice call, Data
call and Video call to be diverted by
pressing the
or
key, and then press
the OK key.
The phone dials your network to find whether
call diverting is possible or not.
All incoming: calls cannot be received.
100
101
Z100.book Pages 102 - 103 Thursday, October 9, 2003 9:52 AM
Settings
After a few minutes, the current status
displays.
2. Press the or key to select one of the
following options.
• Activate: The selected call waiting option is
not activated. Selecting this option activates
your setting.
• DeActivate: The selected call waiting
option is currently active. Selecting this
option deactivates your setting.
3. Press the Request soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
Auto Redial
With this feature, the phone makes up to three
attempts to redial a phone number when the
outgoing call fails.
Closed User Group (CUG)
This network service allows incoming and
outgoing calls to be restricted to a selected user
102
Settings
group. You may be a member of up to ten
groups.
Example: A company lends SIM cards to its
employees and wants to restrict
outgoing calls to members of the same
team.
Activating a Closed User Group
1. Press the OK key to put a check mark on the
CUG use option.
Managing the Index List
You can add a new index and change or delete an
existing index.
1. On the Closed User Group screen, Press the
key to move to the Group Index field.
2. Press the OK key to see the Group index list.
3. Press the
or
key to select an index and
press the Options soft key.
The following options are available:
2. Press the
key to move to the Outside
access field. Use the OK key to enable or
disable calls to numbers other than those
nominated for the Closed User Group.
This feature depends on the nature of your
CUG subscription. Please check with your
service provider.
3. Press the
key to move to the Group
Index field and select the CUG index you
want to activate.
4. Press the Save soft key.
Now, you can select the number from the
Index field.
• Select: saves the current index list.
• New index: enter a new index name and
press the Save soft key.
• Edit index: allows you to change the
selected index.
Note: You can select a network other than your
home network only if it has a valid roaming
agreement with your home network.
Press the
or
key until the appropriate option
highlights and then press the Save soft key
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manually, the phone scans for the
available networks. Press the
or
key until
the preferred network highlights and then press
the Select soft key.You are connected to that
network.
Security (Menu 9-5)
• Delete index: deletes the selected index.
Network Selection (Menu 9-4)
The Network Selection feature enables you to
automatically or manually select the network
used when roaming outside of your home
network.
The Security feature enables you to restrict the
use of your phone
• to the people of your choice
• certain types of calls
Various codes and passwords are used to protect
the features of your phone. They are described in
103
Z100.book Pages 104 - 105 Thursday, October 9, 2003 9:52 AM
Settings
the following sections; see also pages 111 to
112.
Phone Lock
When the Phone Lock feature is enabled, the
phone is locked and you must enter a phone
password of between 4 and 8 digits each time
you switch the phone on.
Press the
or
key to select Enabled or
Disabled and press the Save soft key.
When you select Enabled, the display asks you
to enter the phone password.Enter your
password and press the Confirm soft key.
To change the password, refer to Change
Password menu option on page 105.
SIM Lock
When the SIM Lock feature is enabled, your
phone only works with the current SIM card. To
use another SIM card in your phone, you must
enter the SIM lock password set when you lock
the card.
Press the
or
key to select Enabled or
Disabled and press the Save soft key.
104
Settings
When you select Enabled, the display asks you
to set a new password. Enter a password using
four to eight digits and press the Confirm soft
key.
PIN Lock
When the PIN Check feature is enabled, you
must enter your PIN each time you switch the
phone on. Consequently, any person who does
not have your PIN cannot use your phone without
your approval.
Press the
or
key to select Enabled or
Disabled and press the Save soft key.
When you select Enabled, the display asks you
to enter the PIN code. Enter your PIN code and
press the Confirm soft key.
The PIN code is supplied with your SIM card. To
change your PIN, refer to the Change PIN menu
option on page 105.
Fixed Dialling Mode
If the Fixed Dialling mode is supported by your
SIM card, allows you to restrict your outgoing
calls to the FDN(Fixed Dial Number) stored in the
SIM card memory.
3. Enter the new password again to confirm it
and press the Confirm soft key.
Press the
or
key to select Enabled or
Disabled and press the OK soft key.
Change PIN Code
When you select Enabled, the display asks you
to enter the PIN2 code. Enter your PIN2 code and
press the Confirm soft key.
This feature allows you to change your current
PIN to a new one, provided that the PIN check
feature is enabled.
The PIN2 code is supplied with your SIM card. To
change your PIN2, refer to the Change PIN2
menu option on page 105.
1. Enter the current PIN code and press the
Confirm soft key.
Note: Not all SIM cards have a PIN2. If your SIM
card does not, this menu option does not
display.
Change Phone Password
Using this menu option, you can change your
phone password to a new one.
1. Enter the current password and press the
Confirm soft key.
2. Enter a new password and press the Confirm
soft key.
2. Enter a new PIN code and press the Confirm
soft key.
3. Enter the new code again to confirm it and
press the Confirm soft key.
Change PIN2 Code
The Change PIN2 feature allows you to change
your current PIN2 to a new one.
1. Enter the current PIN2 code and press the
Confirm soft key.
2. Enter a new PIN2 code and press the Confirm soft key.
105
Z100.book Pages 106 - 107 Thursday, October 9, 2003 9:52 AM
Settings
Settings
3. Enter the new code again to confirm it and
press the Confirm soft key.
You can change the time format in the Time
format option below.
Note: Not all SIM cards have a PIN2. If your SIM
card does not, this menu option does not
display.
• Time format: select the time format using
Date & Time (Menu 9-6)
This menu option allows you to set the current
time and date displayed on the idle screen.
You can scroll through the clock options by
pressing the
or
key. Set the following
options:
• Date: enter today’s date. You can move the
cursor back and forth between the input boxes
using the
and
the
and
keys. You can choose from 12H
and
24 H.
• Date format: select the date format using
the
and
keys. You can choose from:
- DD/MM/YYYY (day/month/year)
- MM/DD/YYYY (month/day/year)
• Time: enter the current time. You can move
the cursor using the
and
You can see the total used and free memory.
You can also the memory used by several
applications. Select an application from the list
and press the OK key to see the detailed
information.
Mater Reset (Menu 9-9)
Own Number (Menu 9-7)
This menu option allows you to reset your phone
to its default configuration.
To store your own phone number(s) with a
name;
1. When the display asks you to enter the phone
password, enter it and press the Confirm soft
key.
1. Scroll to a number and press the Select soft
key.
2. Edit the name and my number.
3. Press the Save soft key to save it. Otherwise
press the Cancel soft key.
106
You can check the memory status of Phone and
SIM memory. To change the memory to Phone an
SIM press the SIM or Phone soft key.
- YYYY/DD/MM (year/day/month)
keys. Switch to
AM or PM by pressing one of the number keys.
Your phone automatically turns off and then
back on.
- YYYY/MM/DD (year/month/day)
keys.
You can change a date format in the Date
format option below.
Memory Status (Menu 9-8)
2. When you are asked to confirm your choice,
press the OK soft key.
To exit the function without resetting the
settings, press the Cancel soft key.
107
Z100.book Pages 108 - 109 Thursday, October 9, 2003 9:52 AM
Solving Problems
Solving Problems
You have entered a number but it was
not dialled
Before contacting the after-sales service,
perform the following simple checks. They may
save you the time and expense of an
unnecessary service call.
• The PIN Check feature is enabled. You must
enter the PIN each time you switch the phone
on. To disable this feature, use the PIN lock
menu option (Menu 9-5-3).
When you switch your phone on, the
following messages may appear
Enter PUK
No SIM Card
• Check that the SIM card is correctly installed.
• The PIN was entered incorrectly three times in
succession and the phone is now blocked.
Enter the PUK supplied by your network operator.
Enter Password
“No service” is displayed
• The Phone Lock feature is enabled. You must
enter the phone password each time you
switch the phone on. To disable this feature,
use the Phone lock menu option (Menu 9-51).
• The network connection was lost. You may be
in a weak reception area (in a tunnel or surrounded by buildings). Move and try again.
Enter PIN
• You are using your phone for the first time.
You must enter the Personal Identification
Number supplied with the SIM card.
108
• You are trying to access an option for which
you have not taken out a subscription with
your service provider. Contact the service provider for further details.
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring
option.
Your correspondent cannot reach you
• Is your phone switched on (the
key
pressed for more than one second)?
• Are you accessing the right cellular network?
• You may have set an incoming call barring
option.
Your correspondent cannot hear you
speaking
• The battery is insufficiently charged. Recharge
it. See page 14.
The audio quality of the call is poor
• Check the signal strength indicator on the
display (
); the number of bars indicates
the signal strength from strong (
) to
weak (
).
• Try moving the phone slightly or moving closer
to a window if you are in a building.
No number is dialled when you recall a
phonebook entry
• Check that the number has been stored
correctly, by using the Phonebook Search
feature.
• Have you switched off the microphone (the
Mute icon ( ) appears)?
• Are you holding the phone close enough to
your mouth? The microphone is located at the
bottom of the phone.
The phone starts beeping and “Battery
Low” flashes on the display
109
Z100.book Pages 110 - 111 Thursday, October 9, 2003 9:52 AM
Solving Problems
• Re-store them, if necessary.
If the above guidelines do not help you to solve
the problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
Access Codes
There are several access codes that are used by
your phone and its SIM card. These codes help
you protect the phone against unauthorized use.
The access codes (except for the PUK and PUK2
codes) can be changed using the Security menu
option (Menu 9-5). See page 103 for further
details.
Phone Password
The phone password can be used to avoid
unauthorised use of your phone. The password
“0000” is usually supplied with the phone.
Change the password before you start using your
phone. Keep the new password secret and in a
safe place, which is separate from the phone.
PIN
The PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
It is usually supplied with the SIM card. When
the PIN Check feature is enabled (see page 104),
you must enter the PIN each time you switch on
the phone.
If you enter an incorrect PIN three times in
succession, enter the PUK and press the
Confirm soft key to unlock the phone. Enter a
new PIN and press the Confirm soft key. Enter
the new PIN again and press the Confirm soft
key.
If you enter an incorrect password five times n
succession, the phone will not accept the correct
code for the next five minutes.
110
111
Z100.book Pages 112 - 113 Thursday, October 9, 2003 9:52 AM
Access Codes
Health and Safety Information
PIN2
PUK2
The PIN2, supplied with some SIM cards, is
required to access some functions, such as
charging unit counters. These functions are only
available if supported by your SIM card.
The PUK2, supplied with some SIM cards, is
required to change a blocked PIN2.
Exposure to Radio-Frequency
Energy (SAR Information)
If you enter an incorrect PUK2 ten times in
succession, you cannot use the functions
requiring the PIN2. Contact your service provider
for a new card.
This phone meets European Union (EU)
requirements concerning exposure to radio
waves.
If you enter an incorrect PIN2 three times in
succession, enter the PUK2 and press the
Confirm soft key to unlock the phone. Enter a
new PIN2 and press the Confirm soft key. Enter
the new PIN2 again and press the Confirm soft
key.
PUK
The PUK (PIN Unblocking Key) is required to
change a blocked PIN. The PUK may be supplied
with the SIM card. If not, contact your local
service provider.
If you enter an incorrect PUK ten times in
succession, the SIM card cannot be used
anymore.
Contact your service provider for a new card.
You cannot change the PUK. If you lose the code,
contact your service provider.
112
You cannot change the PUK2. If you lose the
code, contact your service provider.
Call Barring Password
The 4-digit call barring password is required
when you use the Call Barring function. You
obtain the password from your service provider
when you subscribe to this function.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as
not to exceed the limits for exposure to radiofrequency (RF) energy, as recommended by the
EU Council. These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines were developed by
independent scientific organisations through
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all
persons, regardless of age and health.
The exposure standard for mobile phones
employs a unit of measurement known as SAR
(Specific Absorption Rate). The SAR limit
recommended by the EU Council is 2.0W/kg.*
SAR tests are conducted using standard
operating positions with the phone transmitting
at its highest certified power level in all tested
frequency bands. Although the SAR is
determined at the highest certified power level,
the actual SAR level of the phone while operating
can be well below the maximum value. This is
because the phone is designed to operate at
multiple power levels so as to use only the power
required to reach the network. In general, the
closer you are to a base station, the lower the
power output of the phone.
Before a new model phone is available for sale to
the public, compliance with the European R&TTE
Directive must be shown. This directive includes
as one of its essential requirements the
protection of the health and safety of the user
and any other person.
*The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body
tissue. The limit incorporates a substantial margin of
safety to give additional protection for the public and to
account for any variations in measurements. The SAR
values may vary depending on national reporting
requirements and the network band.
113
Z100.book Pages 114 - 115 Thursday, October 9, 2003 9:52 AM
Health and Safety Information
Precautions When Using Batteries
Your phone is powered by a rechargeable Li-ion
standard battery.
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby
times are greatly affected by the signal
strength on the cellular network and the
parameters set by the network operator.
• Battery charging times depend on the remaining battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the operation time (talk
time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in
use, disconnect it from the power source. Do
not leave the battery connected to a charger
114
Health and Safety Information
for more than a week, since overcharging may
shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling
or warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions, as you will reduce the capacity and lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot
or cold battery may temporarily not work, even
when the battery is fully charged. Li-ion batteries are particularly affected by temperatures
below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental
short circuiting can occur when a metallic
object (coin, clip or pen) causes a direct
connection between the + and – terminals of
the battery (metal strips on the back of the
battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the
terminals may damage the battery or the
object causing the short-circuit.
• Dispose of used batteries in accordance with
local regulations. Always recycle. Do not
dispose of batteries in a fire.
Operating Environment
Electronic Devices
Remember to follow any special regulations in
force in any area and always switch off your
phone whenever it is forbidden to use it, or when
it may cause interference or danger.
Most modern electronic equipment is shielded
from radio frequency (RF) signals. However,
certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
Consult the manufacturer to discuss alternatives.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting
equipment, users are advised that for the
satisfactory operation of the equipment and for
the safety of personnel, it is recommended that
the equipment should only be used in the normal
operating position (held to your ear with the
antenna pointing over your shoulder).
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with
the pacemaker. These recommendations are
consistent with the independent research and
recommendations of Wireless Technology
Research.
Persons with pacemakers:
• Should always keep the phone more than 15
cm (6 inches) from their pacemaker when the
phone is switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimize potential interference
115
Z100.book Pages 116 - 117 Thursday, October 9, 2003 9:52 AM
Health and Safety Information
If you have any reason to suspect that
interference is taking place, switch off your
phone immediately.
Hearing Aids
Health and Safety Information
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer or
its representative regarding your vehicle.
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your
hearing aid manufacturer to discuss alternatives.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Other Medical Devices
Switch off your phone in any facility where
posted notices require you to do so.
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from
external RF energy. Your physician may be able
to assist you in obtaining this information. Switch
off your phone in health care facilities when any
regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be
using equipment that could be sensitive to
external RF energy.
116
Areas with a potentially explosive atmosphere
are often but not always clearly marked. They
include below deck on boats, chemical transfer or
storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane),
areas where the air contains chemicals or
particles, such as grain, dust or metal powders,
and any other area where you would normally be
advised to turn off your vehicle engine.
networks or when certain network services and/
or phone features are in use. Check with local
service providers.
Obey posted instructions
Potentially Explosive Atmospheres
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all
signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in
bodily injury or even death.
Users are advised to switch off the phone while
at a refuelling point (service station). Users are
reminded of the need to observe restrictions on
the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants
or where blasting operations are in progress.
Emergency Calls
This phone, like any wireless phone, operates
using radio signals, wireless and landline
networks as well as user-programmed functions,
which cannot guarantee connection in all
conditions. Therefore, you should never rely
solely on any wireless phone for essential
communications (medical emergencies, for
example).
Remember, to make or receive any calls the
phone must be switched on and in a service area
with adequate signal strength. Emergency calls
may not be possible on all wireless phone
117
Z100.book Pages 118 - 119 Thursday, October 9, 2003 9:52 AM
Health and Safety Information
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Enter the emergency number for your present
location (for example, 112 or any other
official emergency number). Emergency
numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to
give all the necessary information as accurately
as possible. Remember that your phone may be
the only means of communication at the scene of
an accident; do not cut off the call until given
permission to do so.
118
Health and Safety Information
Other Important Safety
Information
• Switch off your phone before boarding an
aircraft. The use of wireless phones in aircraft
may be dangerous to the operation of the
aircraft, and is illegal.
• Only qualified personnel should service the
phone or install the phone in a vehicle. Faulty
installation or service may be dangerous and
may invalidate any warranty applicable to the
device.
• Failure to observe these instructions may lead
to the suspension or denial of telephone
services to the offender, or legal action, or
both.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
Care and Maintenance
• Do not store or carry flammable liquids, gases
or explosive materials in the same
compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag,
remember that an air bag inflates with great
force. Do not place objects, including both
installed or portable wireless equipment in the
area over the air bag or in the air bag
deployment area. If wireless equipment is
improperly installed and the air bag inflates,
serious injury could result.
Your phone is a product of superior design and
craftsmanship and should be treated with care.
The suggestions below will help you fulfill any
warranty obligations and allow you to enjoy this
product for many years.
• Keep the phone and all its parts and accessories out of the reach of small children.
• Keep the phone dry. Precipitation, humidity
and liquids contain minerals that will corrode
electronic circuits.
• Do not touch the phone with wet hands while it
is charging. Doing so may give you an electric
shock or damage the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating temperature, moisture can form inside the phone,
which may damage the phone’s electronic circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents
or strong detergents to clean the phone. Wipe
it with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator. The phone may explode when overheated.
119
Z100.book Pages 120 - 121 Thursday, October 9, 2003 9:52 AM
Health and Safety Information
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas
or modified accessories may damage the
phone and violate regulations governing radio
devices.
• If the phone, battery, charger or any accessory
is not working properly, take it to your nearest
qualified service facility. The personnel there
will assist you, and if necessary, arrange for
service.
Glossary
To help you understand the main technical terms
and abbreviations used in this booklet and take
full advantage of the features of your mobile
phone, here are a few definitions.
Ability to put one call on standby while
answering or making another call; you can then
switch between the two calls, as required.
Call Waiting
3G (3rd Generation)
The collective name used to describe mobile
systems able to support a wild range of Mobile
Internet services, operating with greater
bandwidth.
Bearer
Various mechanisms the network uses to
transmit voice and data.
Call Barring
Ability to restrict outgoing and incoming calls.
Ability to inform users that they have an
incoming call when engaged on another call.
Circuit-switched
A type of network in which a physical path is
obtained for and dedicated to a single connection
between two end-points in the network for the
duration of the connection. The telephone
networks are examples of circuit-switched
networks. Ordinary voice phone service is circuitswitched. The telephone company reserves a
specific physical path to the number you are
calling for the duration of your call. During that
time, no one else can use the physical lines
involved.
Call Diverting
Ability to reroute calls to another number.
Call Holding
120
CLI (Caller Line Identification) Services
Services allowing subscribers to view or block
the telephone numbers of callers.
121
Z100.book Pages 122 - 123 Thursday, October 9, 2003 9:52 AM
Glossary
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a
mobile telephone network. GPRS guaranties
continuous connection to the Internet for mobile
phone and computer users. It is based on the
Global System for Mobile Communication (GSM)
circuit-switched cellular phone connections and
the Short Message Service (SMS).
Glossary
it is called a “Java applet.” When it is run on a
mobile phone or pager, it is called a “Midlet.”
MMS (Multimedia Message Service)
International standard for cellular
communication, guaranteeing compatibility
between the various network operators. GSM
covers most European countries and many other
parts of the world.
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For
phone users, MMS is similar to Short Message
Service (SMS)-it provides automatic, immediate
delivery of user-created content from phone to
phone. The message addressing used is primarily
phone numbers, thus the traffic goes from phone
to phone. MMS also provides support for e-mail
addressing, so that messages can also be sent by
e-mail. In addition to the text content of SMS,
MMS messages can contain still images, voice or
audio clips, and later also video clips and
presentation information.
Java
Multiparty Calling
Programming language generating applications
that can run on all hardware platforms, whether
small, medium or large, without modification. It
has been promoted for and geared heavily to the
Web, both for public web sites and Intranets.
When a Java programme runs from a web page,
Ability to establish a conference call involving up
to five additional parties.
GSM
(Global System for Mobile Communication)
122
Packet-Switched
PUK (PIN Unblocking Key)
A type of network in which relatively small units
of data called packets are routed through a
network based on the destination address
contained within each packet. Today’s Internet is
a quintessential packet-switched network.
Whereas voice requires a smooth flow of traffic to
avoid echo and breakup, data can be cut into
small packets with each being sent across the
network and reassembled at the final
destination. Packet inevitably allows a greater
amount of users because it does not require a
dedicated open circuit. PDC-P in Japan, GPRS in
Europe and all the future 3G networks will be
packet-switch.
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
PIN (Personal Identification Number)
Security code that protects the phone/SIM
against unauthorised use. The PIN is supplied by
the service provider with the SIM card. It may be
a four to eight-digit number and can be changed,
as required.
Roaming
Use of your phone when you are outside your
home area, when travelling for example.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
SMS (Short Message Service)
Network service sending and receiving messages
to and from another subscriber without having to
speak to the correspondent. The message
created or received can be displayed, received,
edited or sent.
123
Z100.book Page 124 Thursday, October 9, 2003 9:52 AM
Glossary
UMTS ( Universal Mobile
Telecommunications System)
A 3rd generation (3G) mobile communications
technology that promises data transmission
speeds of up to 2 megabits per second (Mbps).
124
Z100.book Page 125 Thursday, October 9, 2003 9:52 AM
Index
A
C
ABC mode 31, 34
Accessories 7
Alarm 92
Alert
call alert type • 94
Message alert tone• 94
Message alert type• 94
tones • 95
Alert type 94
Anniversary 89
Answering a call 23
Anykey answer 97
Application explorer 42
Applications 42
downloading • 50
Auto redial 102
Calculator 91
Calendar 87
Call 52, 99
alert type • 94
answering • 23
barring • 100
barring password • 112
conference • 26
cost • 53
diverting • 99
emergency • 6
ending • 23
holding • 24, 25
international • 21
log • 52
making • 21
redirect • 99
rejecting • 23
second • 24
time • 53
video • 29
waiting • 101
Call log 52
all • 52
dialled • 52
missed • 52
received • 52
Caller ID 99
Camera 43
capture mode • 44
record mode • 46
B
Backlight 96
Battery
charging • 15
installing • 14
low battery indicator • 16
precautions • 114
removing • 15
Bookmark 64
Brightness
LCD • 96
picture • 45
Browser
see also WAP browser
taking pictures • 43
Clock
digital clock • 98
World clock • 91
Closed user group 102
Contacts 55
add • 56
search • 55
view • 58
Converter 92
Cover title 98
CUG 102
Currency rates 92
D
Date 106
Display
brightness • 96
cover • 98
external • 12
icons • 11
layout • 10
Diverting 99
Drafts 76
DTMF tones 29
E
Earpiece volume • 24
Effect tones 94
Email box 75
Emergency call 6, 117
Ending a call 23
125
Z100.book Pages 126 - 127 Thursday, October 9, 2003 9:52 AM
Index
F
Index
Key tones 24
Keys
description • 9
location • 8
Media attach message 70
Media player 47
Memo 90
Memory status 107
Message
Draft • 76
Messages 67
create • 67
media attach • 70
memory status • 81
MMS postcard • 72
MMS templates 72
multimedia • 68
preset • 77
short • 67
Microphone Off (Mute) 28
MMS postcard 72
Multimedia files 82
Multimedia message 68
Music files 85
My info 61
My stuff 82
L
N
Language 96
Lock
Phone • 104
PIN • 104
SIM • 104
Low battery indicator 16
Network selection 103
Number mode 31, 35
FDN mode 104
Functions
menu • 36
G
Greeting message 98
Groups 59
I
Icons, description • 11
Image files 83
Inbox 74
Instant Message 43
International call 21
Internet 62
K
M
Main menu style 98
Maintenance 119
Master reset 107
126
O
Organiser 87
Outbox 76
Own number 106
P
Phone lock 104
Phone password 105, 111
PIN 105, 111
PIN lock 104
PIN2 105, 112
Preset message 77
Problem solving 107
Profiles 94
PUK 112
PUK2 112
R
Reject a call 23
Ring tone 94
S
Safety
precautions • 5
SAR 113
Schedule 88
Security 103
Service light 12
Settings 96
Email • 80
multimedia message • 78
phone • 96
short message • 77
voice mail • 81
Short cuts 97
Short message 67
SIM card
inserting • 13
removing • 14
SIM lock 104
Solving problems • 107
Sound mode 94
Speed dial 60
Switching applications 19
Switching on/off 17
phone • 16
Symbol mode 31, 35
T
T9 mode 31, 32
Time 106
To do list 89
Today’s event 88
Tone volume 94
Tones
Call connect tone • 95
Call end tone • 95
Effect sounds • 95
Folder open/close • 95
Key tone volume • 95
Key tones • 95
Minute minder • 95
Popup box alerts • 94
Power on • 95
W
Wake up alarm 92
Wallpaper 98
WAP browser 62
Browser menu • 63
ending • 62
launching • 62
navigating • 63
setting • 65
U
Unpacking • 7
V
Video call 29
making • 29
options • 30
PIP • 30
receiving • 30
Video files 84
Voice memo 49
Volume 24
127