HLG-120H
120W Single Output Switching Power Supply
series
■ Features :
Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
High efficiency up to 93.5%
Protections: Short circuit / Over current / Over voltage / Over temperature
Cooling by free air convection
OCP point adjustable through output cable or internal potentiometer
IP67 / IP65 design for indoor or outdoor installations
Three in one dimming function (1~10Vdc or PWM signal or resistance)
Suitable for LED lighting and street lighting applications
Compliance to worldwide safety regulations for lighting
Suitable for dry / damp / wet locations
5 years warranty (Note.10)
110
F
HLG-120H-12 A
M
M
SELV
Bauar t gepruft
Sicherheit
egel ma ge
od
o s
be wac
g
IP65 IP67
www. tuv.com
ID 2000000000
Blank : IP67 rated. Cable for I/O connection.
A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance.
D (option, safety pending) : IP67 rated. Timer dimming function, contact MEAN WELL for details.
SPECIFICATION
MODEL
DC VOLTAGE
HLG-120H-12
HLG-120H-15
HLG-120H-20
HLG-120H-24
HLG-120H-30
HLG-120H-36
HLG-120H-42
HLG-120H-48
12V
15V
20V
24V
30V
36V
42V
48V
54V
7.5 ~ 15V
10 ~ 20V
12 ~ 24V
18 ~ 36V
21 ~ 42V
24 ~ 48V
27 ~ 54V
CONSTANT CURRENT REGION Note.4 6 ~12V
OUTPUT
HLG-120H-54
RATED CURRENT
10A
8A
6A
5A
15 ~ 30V
4A
3.4A
2.9A
2.5A
2.3A
RATED POWER
120W
120W
120W
120W
120W
122.4W
121.8W
120W
124.2W
RIPPLE & NOISE (max.) Note.2 150mVp-p
150mVp-p
150mVp-p
150mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
VOLTAGE ADJ. RANGE Note.6 10.8 ~ 13.5V
13.5 ~ 17V
17 ~ 22V
22 ~ 27V
27 ~ 33V
33 ~ 40V
38 ~ 46V
43 ~ 53V
49 ~ 58V
Can be adjusted by internal potentiometer A type only
CURRENT ADJ. RANGE
4 ~ 8A
3 ~ 6A
2.5 ~ 5A
2 ~ 4A
1.7 ~ 3.4A
1.4 ~ 2.9A
1.2 ~ 2.5A
1.1 ~ 2.3A
VOLTAGE TOLERANCE Note.3 ±2.5%
±2.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±1.5%
±2.0%
Note.8 1200ms,50ms/115VAC
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
5 ~ 10A
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
12ms at full load
HOLD UP TIME (Typ.)
VOLTAGE RANGE
Note.5 90 ~ 305VAC
FREQUENCY RANGE
500ms,50ms/230VAC at full load ; B type 1200ms,200ms/115VAC
500ms,200ms/230VAC at 95% load
230VAC / 115VAC
127 ~ 431VDC
47 ~ 63Hz
PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
POWER FACTOR (Typ.)
TOTAL HARMONIC DISTORTION THD< 20% when output loading≧50% at 115VAC/230VAC input and output loading≧75% at 277VAC input
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
LEAKAGE CURRENT
OVER CURRENT
SHORT CIRCUIT
PROTECTION
OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS Note.7
92%
93%
93%
92%
93%
1.4A / 115VAC
0.6A / 230VAC
0.55A / 277VAC
COLD START 60A(twidth=375μs measured at 50% Ipeak) at 230VAC
93%
93%
93.5%
93.5%
54 ~ 63V
59 ~ 65V
5 units (circuit breaker of type B) / 9 units (circuit breaker of type C) at 230VAC
<0.75mA / 277VAC
95 ~ 108%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Constant current limiting, recovers automatically after fault condition is removed
47 ~ 53V
34 ~ 38V
14 ~ 17V
18 ~ 21V
28 ~ 34V
41 ~ 46V
23 ~ 27V
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
Shut down o/p voltage, recovers automatically after temperature goes down
-40 ~ +70℃ (Refer to "Derating Curve")
20 ~ 95% RH non-condensing
-40 ~ +80℃, 10 ~ 95% RH
±0.03%/℃ (0 ~ 50℃)
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750, CSA C22.2 No. 250.0-08, ENEC, TUV EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1,
J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1
SAFETY & WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
EMC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (≧50% load) ; EN61000-3-3
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
I/P-FG:2KVAC
O/P-FG:1.5KVAC
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A
192.2K hrs min. MIL-HDBK-217F (25℃)
220*68*38.8mm (L*W*H)
1.12Kg; 12pcs/14.4Kg/0.8CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Please refer to "DRIVING METHODS OF LED MODULE".
5. Derating may be needed under low input voltages. Please check the static characteristics for more details.
6. A type only.
7. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1, FCC part18.
8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
10. Refer to warranty statement.
11. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently
connected to the mains.
File Name:HLG-120H-SPEC 2015-05-11
HLG-120H
120W Single Output Switching Power Supply
Mechanical Specification
Case No.994A
series
Unit:mm
Blank:(HLG-120H)
220
196
12
9.4
9.6
34.2
T case
68
300±20
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
98
300±20
9.4
34
SJTW 18AWG×3C
SJTW 14AWG×2C
ψ4.2×4PL
-V(Black)
+V(Red)
38.8
※ T case: Max. Case Temperature.
※IP67 rated. Cable for I/O connection.
A Type:(HLG-120H-_A)
220
196
12
9.4
9.6
34.2
Vo
ADJ.
T case
68
300±20
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
98
9.4
34
SJTW 18AWG×3C
Io
ADJ.
300±20
SJTW 14AWG×2C
ψ4.2×4PL
-V(Black)
+V(Red)
38.8
※ T case: Max. Case Temperature.
※ IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
(Can access by removing the rubber stopper on the case.)
B Type:(HLG-120H-_B)
220
196
12
9.6
9.4
300±20
SJTW 18AWG×2C
T case
68
98
SJTW 14AWG×2C
34
34.2
SJTW 18AWG×3C
9.4
ψ4.2×4PL
DIM+(Blue)
DIM-(White)
-V(Black)
+V(Red)
※ T case: Max. Case Temperature.
38.8
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
300±20
File Name:HLG-120H-SPEC 2015-05-11
HLG-120H
120W Single Output Switching Power Supply
series
D Type(option):(HLG-120H-_D)
220
196
12
9.4
9.6
34.2
T case
98
68
300±20
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
300±20
9.4
34
SJTW 18AWG×3C
-V(Black)
+V(Red)
SJTW 14AWG×2C
ψ4.2×4PL
38.8
※ T case: Max. Case Temperature.
※ IP67 rated. Timer dimming function, contact MEAN WELL for details.
Block Diagram
Fosc : 100KHz
EMI FILTER
&
RECTIFIERS
I/P
RECTIFIERS
&
FILTER
POWER
SWITCHING
PFC
CIRCUIT
+V
-V
DIM+
DIM(B Type)
O.L.P.
FG
DETECTION
CIRCUIT
O.L.P.
PFC
CONTROL
PWM
CONTROL
O.T.P.
O.V.P.
Derating Curve
Static Characteristics
100
100
90
80
80
70
LOAD (%)
LOAD (%)
60
40
20
-40
-25
-10
0
15
30
50
AMBIENT TEMPERATURE (℃)
60
70
(HORIZONTAL)
60
50
40
90
100
125
135
145
155 165
175
180
200
230
305
INPUT VOLTAGE (V) 60Hz
File Name:HLG-120H-SPEC 2015-05-11
HLG-120H
120W Single Output Switching Power Supply
series
Power Factor Characteristic
Constant Current Mode
PF
1 .0 0
0 .9 8
0 .9 6
0 .9 4
0 .9 2
0 .9 0
0 .8 8
0 .8 6
0 .8 4
0 .8 2
0 .8 0
0 .7 8
277V ac
230V ac
115V ac
50%
60%
70%
80%
90%
100%
(120W)
LOAD
EFFICIENCY vs LOAD (48V Model)
HLG-120H series possess superior working efficiency that up to 93.5% can be reached in field applications.
96
EFFICIENCY (%)
92
88
84
277Vac
80
230Vac
115Vac
76
72
68
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
DRIVING METHODS OF LED MODULE
There are two major kinds of LED drive method "direct drive" and "with LED driver".
A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs.
Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B).
In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.
100
Should there be any compatibility issues, please contact MEAN WELL.
(A) Constant
Voltage area
Vo(%)
(B)
Constant
Current region
50
100
Io (%)
Typical LED power supply I-V curve
File Name:HLG-120H-SPEC 2015-05-11
HLG-120H
120W Single Output Switching Power Supply
series
DIMMING OPERATION (for B-type only)
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
DIM+(Blue)
DIM-(White)
HLG-120H
-V(Black)
+V(Red)
※ Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or
1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-.
※ Please DO NOT connect "DIM-" to "-V".
※ Reference resistance value for output current adjustment (Typical)
Single driver
10KΩ 20KΩ 30KΩ 40KΩ 50KΩ 60KΩ 70KΩ 80KΩ 90KΩ 100KΩ
Resistance
Multiple drivers
value
(N=driver quantity for synchronized 10KΩ/N 20KΩ/N 30KΩ/N 40KΩ/N 50KΩ/N 60KΩ/N 70KΩ/N 80KΩ/N 90KΩ/N 100KΩ/N
dimming operation)
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
OPEN
----95%~108%
※ 1 ~ 10V dimming function for output current adjustment (Typical)
Dimming value
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
OPEN
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
95%~108%
※ 10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz
Duty value
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
OPEN
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
95%~108%
※Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. Please refer to the connection method below to
achieve 0% brightness of the lighting fixture connecting to the LED power supply unit.
※Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
Dimming connection diagram for turning the lighting fixture ON/OFF :
N
FG
L
Switch
Relay
Adjuster
10K~100K Ohms resistance
1~10V DC Voltage
10V PWM Signal
Green/
Yellow
Brown
Blue
AC/L
HLG-120H
B Type
AC/N
DIM+
DIMV(-)
V(+)
Blue
White
Black
Red
LED Lighting Fixture
Using a switch and relay can turn ON/OFF the lighting fixture.
1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-.
2.The LED lighting fixture can be turned ON/OFF by the switch.
File Name:HLG-120H-SPEC 2015-05-11
HLG-120H
120W Single Output Switching Power Supply
series
WATERPROOF CONNECTION
◎ Waterproof connector
Waterproof connector can be assembled on the output cable of HLG-120H to operate in dry/wet/damp or outdoor environment.
AC
source
HLG-120H
I/P
O/P
Size
Size
Pin Configuration (Female)
M12
Order No.
Suitable Current
4-PIN
5A/PIN
M12-04
10A max.
Pin Configuration (Female)
M15
5-PIN
5A/PIN
M12-05
10A max.
2-PIN
12A/PIN
M15-02
12A max.
Order No.
Suitable Current
LED Lamp
◎ Cable Joiner
CJ04-1 suitable for 14AWG~16AWG
CJ04-2 suitable for 18AWG~22AWG
20
ψ25
66
26
Up to four wires can be connected through this cable joiner by
soldering or clamping by tools.
LED Lamp
HLG-120H
O/P Wires
※CJ04 cable joiner can be purchased independently for user's own assembly.
MEAN WELL order No. : CJ04-1, CJ04-2.
◎ Junction Box(Option )
10
76
5
8.5
SJTW 18AWG×3C
-V(Black)
+V(Red)
32
68
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
61
8.5 6
196
358
SJTW 14AWG×2C
2-ψ5
3- PF 1/2"
3- PF 1/2"
150±20
35
38.8
150±20
※Optional junction box available for A / Blank - type , please contact MEAW WELL for details.
86
File Name:HLG-120H-SPEC 2015-05-11