RespirAide Tech R200T Specifications

6
Phase
Electronic Air Purifier
Operation Manual
Model No. RespirAide200T
228256
R
C
US
To reduce the risk of electric shock,
this equipment has a grounding
type plug that has a third
(grounding) pin.This plug will only fit
into a grounding type power outlet.If
the plug does not fit into the outlet,
contact a qualified personnel to
install the proper outlet.Do not alter
the plug in any way.
Sensor
Manual
Timer
Auto
Remote control Button melody
Filter & UV lamp Safety switch
replacement alarm
Check alarm
Before operating the system,please read this
manual thoroughly,and retain it for future
reference.
This product can be used only where the
power supply is 120V/60Hz.You can not use
the unit if the power voltage is different.
RespirAide Tech Inc.
Add:13-100 Hanlan Road
Woodbridge, Ontario Canada
L4L 4V8
Tel: 1-866-874-2532
Fax: 1-905-850-5553
www.respiraide.com
**RespirAide is a trademark of RespirAide Tech Inc.
R
English
WARNING
BEFORE OPERATING AIR PURIFIER,
READ ALL INSTRUCTIONS IN THIS MANUAL
CAREFULLY.
CONTENTS
FOR CUSTOMER ASSISTANCE .................................... E-4
CONSUMER LIMITED WARRANTY................................ E-5
HOW IT WORKS ............................................................. E-6
FEATURES AND SPECIFICATIONS .............................. E-7
FEATURES ...................................................................... E-7
SPECIFICATIONS .......................................................... E-7
IMPORTANT SAFETY PRECAUTIONS ......................... E-8~11
WARNING ....................................................................... E-8
CAUTIONS CONCERNING OPERATION ...................... E-8
PARTS NAMES AND DESCRIPTION ............................ E-12~13
UNIT DISPLAY ................................................................. E-14
BEFORE OPERATION ................................................... E-15
Remote Control Setup ..................................................... E-15
OPERATION ................................................................... E-16~18
Main Unit Operation ......................................................... E-16
Indicator Lights ............................................................... E-17
Remote Control Operation ............................................... E-18
CARE AND MAINTENANCE .......................................... E-19~21
Main Unit .......................................................................... E-19
Cleaning the Pre-filter ..................................................... E-19
Cleaning the Electronic Cell ............................................. E-20
Replacing the Activated Carbon Filter ............................. E-21
Photo catalytic Filter and UV Germicidal Lamp ............... E-21
TROUBLESHOOTING .................................................... E-22
WIRING DIAGRAM ......................................................... E-23
E-3
FOR CUSTOMER ASSISTANCE
If you have questions about your air purifier, call customer service number.Before calling, please note the model
and serial number located on the back of the unit and fill in the following information below.This information will help
us answer your questions much more quickly.
Model number
Serial number
Date of purchase
Dealer name
Address
City
Province
Postal code
Telephone
To phone:1-866-874-2532
To write:For service problems, warranty information,missing
items and other assitance:
RepirAide Tech Inc.
13-100 Hanlan Road Woodbridge, Ontario Canada
L4L 4V8
Please provide the following information when you write or
call:model number, serial number, date of purchase, your
complete mailing address(including Postal Code), your daytime
telephone number(including area code) and description of the
problem.
E-4
CONSUMER LIMITED WARRANTY
RespirAide AIR PURIFIER
LIMITED WARRANTY
Congratulations on your investment
RespirAide Tech Inc.(hereinafter called RTI) gives you the following limited warranty for this product
only if it was originally purchased from RTI or from an Authorized RTI Dealer.
RTI warrants that this product is free, under normal use and maintenance, from any defects in material
and workmanship.If any such defects should be found in this product within the applicable warranty
period.RTI shall, at this option, repair or replace the product as specified herein.
RTI will repair or replace, free of charge, to the original purchaser, any part that is found to be defective
in material or workmanship within one (1) year of the date of purchase.This limited warranty does not
cover the replacement of expendable or consumable parts such as filters,and other parts subject to
normal wear unless they are defective in material or workmanship.
R
This warranty shall not apply to:
(A) Any defects caused or repairs required as a result of abusive
operation,negligence,accident,improper installation or inappropriate use as outlined in the operation
manual.
(B) Any product tampered with modified, adjusted or repaired by any party other than RTI,RTI
Authorized Service Centers or RTI Authorized Service Dealers.
(C) Damaged caused or repairs required as a result of the use with items not specified or approved by
RTI.
(D) Any damage caused by external or enviromental conditions, including but not limited to the use of
voltage other than indicated on the product.
RTI's limited warranty is valid only if you retain proof of purchase from RTI or an RTI Authorized Retail
Dealer for this product.
To obtain the name and address of the nearest
Authorized RespirAide Dealer, please contact:
13-100 Hanlan Road, Woodbridge, Ontario
Canada L4L 4V8
R
RespirAide Tech Inc.
For more information on this Warranty,Dealer or
Service Locations, please call1-866-874-2532
Visit our website: www.respiraide.com
E-5
HOW IT WORKS
The air purifier functions as an air cleaner by helping to disinfect airborne microorganisms and removing
particulates from the air .
The centrifugal fans of the unit draw air through the front panel (Intake) on the front of the unit.Then it passes
through the Microbiologic filter, the Electrostatic precipitator, the Activated Carbon Filter and the UV-Photo
catalytic sterilization chamber.The purified air is then realeased through the outlet on the top of the unit.
The air is cleaned in six stages:
1. The Microbiologic Pre-filter traps large dust particles.
2. The two stage electrostatic precipitator (Electronic
cell) captures airborne particles,as small as 0.01
microns.In the ionizing section of the electronic cell,
billions of microscopic particles become electrically
charged as they pass through the powerful electric
field. The collector plates immediately attract and
collect these charged dust and dirt particles.
3. The Activated Carbon Filter absorbs and reduces
odors, chemicals and gases, removes tobacco smoke,
the smell of food and other odors.
4. The UV sterilization chamber kills bacteria and viral
micro-organisms such as influenza, TB and
Legionnaire's Disease as well as other harmful
contaminants.
5. When UV light hits the photo catalytic filter, it creates
e- and h+, which have an excellent effect in the
decomposition of odors.
6. The unit also generates negative ions that freshens
the room air.
E-6
FEATURES AND SPECIFICATIONS
FEATURES
Multi-Stage Filters
The unit utilizes a two stage electrostatic precipitator combined with a Microbiologic Pre-filter (for large
particles), an Activated Carbon Filter (for odors and gases), UV germicidal light (killing airborne pathogen),
a Photo catalytic filter (removes VOC's) and a Negative ion generator.
Automatic Function
The gas sensor(odor sensor) can let the unit automatically select the appropriate fan speed depending on
the air quality detected.
Filter and UV Lamp Replacement Indicator
The "FILTER" and "UV LAMP" replacement indicators tell you when to replace filter and UV lamp.
Safety Micro-Switch (Interlock Switch)
This air purifier is equipped with safety interlock switches(Micro-safety switch) that turn the unit off if the
front panel is removed while the unit is running.
Easy Maintenance and Low Cost
When the electrostatic precipitator(Electronic cell) needs to be washed or the filters to be replaced, simply
open the front panel and lift out the electronic cell or old filters and drop the new or clean one in.
No screws, hooks or tools are required. The electronic cell captures small particles on aluminum plates
that are simply lifted out and rinsed off in the sink.There are no expensive filters to replace.
SPECIFICATIONS
Model No.
RespirAide200T
Power Requirement
120V,60Hz,1.1A
Rated Power
55W
Fan Motor
120V,60Hz,0.8A
Fan Speed CFM
H-300,M-135,L-88
Applicable Floor Surface
1 air exchange per hour: 2257 sq.ft.
(Ceiling height 8')
2 air exchanges per hour: 1129 sq.ft.
5 air exchanges per hour: 451 sq.ft.
19 air exchanges per hour: 10 x 12 sq.ft.
*The applicable floor surface area is appropriate for operating the unit at maximum fan speed.
Noise Level
<45dB
Negative Ion
>1.2x106pcs/cc
UV Lamp
6W
Cord Length
2.5m (8.3 ft)
Dimensions
82cm(H)x48cm(W)x22cm(D) (32.2 in.x18.9 in.x8.7 in.)
Weight
29kg+5kg%(63
lbs+5%)
-
Standby Power
In order to operate the electrical circuits while the power plug is inserted in the wall outlet, this product
cosumes about 2W of standby power.For energy conservation, unplug the power cord when the unit is
not in use.
E-7
IMPORTANT SAFETY PRECAUTIONS
When using electrical appliances,basic safety precaustions should always be followed, including the following:
WARNING -To reduce the risk of electrical shock, fire or injury to persons:
Use only as described in this manual.
Use only a 120-volt outlet with a polarized receptacle.
The air purifier has a polarized plug (one blade is wider than the other is),this plug will fit in a polarized outlet
only one way.Initially, if the plug does not fit into the outlet, reverse it.If it still does not fit, contact a qualified
electrician or service person.
Do not use the air purifier if the power cord or plug is damaged or the connection to the wall outlet is loose.
When removing the power plug, always hold the plug and never pull by the cord.Do not handle plug or
appliance with wet hands.Electrical shock and/or fire from short circuit may occur.
Remove the power plug from the wall outlet before cleaning the unit and when not using the unit.Turn off all
controls before unplugging.
If the power cord is damaged,it must be replaced by the manufacturer, its service agent, RespirAide authorized
service or similarly qualified person.
Do not insert fingers or foreign objects into the intake or air outlet.
The batteries must be removed from the remote control before disposal, and the batteries must be disposed of
safely.
Keep hair,loose clothing, fingers and all parts of body always from openings and moving parts.
Do not use appliance in an enclosed space where oxygen, flammable, explosive or toxic vapors are
given off by oil base paint, paint thinner, some mothproofing substances, or in an area where
flammable dust is present.
CAUTIONS CONCERNING OPERATION
Do not block the intake and air outlet.
Do not use the unit near or on hot objects, such as range or where it may come into contact with steam.
Do not use the unit on its side.
Always hold the handles on the side of the unit when moving it.
Holding the front panel when carrying may cause it to detach, thus result bodily injury.
Be careful not to tip over the unit when opening the front panel.If not,it may cause personal injury.
Do not operate the unit without filters.
Do not wash and reuse Activated Carbon Filter.
Do not clean outside with paint thinner or any chemicals.The unit surface may become damaged or may
cause fire.
E-8
IMPORTANT SAFETY PRECAUTIONS
This manual classifies precautions into WARNINGS and CAUTIONS.Be sure to
to follow all precautions below:They are important for ensuring your safety.
WARNING
If you do not follow these instructions
exactly,the unit may cause property
damage,personal injury or loss of life.
CAUTION
If you do not follow these instructions
exactly,the unit may cause minor
property damage or personal injury.
120V
Do not do anything that could damage the
electrical power cord.Do not set heavy items on
the cord or place the cord between items.If the
electrical power cord is damaged,fire or electric
shock may occur.
Do not use the power cord if it is damaged or
loose in the socket.Using the power cord in
anything but proper working condition can lead
to short-circuits and subsequently electric shock
and/or fire.
Use the plug provided exclusively for the product.
Connecting the system in an improper power
source may cause electric shock or a breakdown
of the system.
If the power plug is unplugged,be sure to hold and
pull out the end of the power plug without holding
the power cord.Do not pull on the power cord to
remove the plug from the wall outlet.There is a
chance that an electrical short or short- circuit
may occur causing a fire.
E-9
IMPORTANT SAFETY PRECAUTIONS
125V 2A
Copper Wire
Do not operate the unit or touch the plug with
wet hands.It may cause electric shock.
Use a fuse with proper capacity.Never use a
wire in place of a fuse.Doing this may lead to
malfunction or fire.
40 C
5C
Relative humidity<80%
If any parts of the power source get wet remove
the plug and dry it completely before reusing.
Use the product in the ambient temperature of
0-40 C .
Do not place the product in direct contact with
sunlight.It may cause malfunction and
deformation of the product.
Do not block the intake or outlet.Blocked
openings can reduce capacity or damage the
unit.
E-10
IMPORTANT SAFETY PRECAUTIONS
Do not disassemble or modify this equipment.
Unwarranted tampering can lead to fire ,electric
shock and/or unit malfunction.
Prevent combustibles from being drawn into
the unit.Combustible substances can cause fire.
Make sure to prevent water from coming into the
product.It can lead to malfunction or electric
shock.
Be careful not to tip over the unit when opening
the front panel.If not,It may cause personal
injury.
After cleaning the filters,make sure to dry the cell
thoroughly before reinstalling.If not, it can cause
breakdown of the unit or personal injury.
English
Do not use the unit in humid places which
might be wet.Contact with water can lead to
electric shock or damage the equipment.
E-11
PART NAMES AND DESCRIPTION
1.5
1
1.4
2
FILTER
CHECK
UV LAMP
1.3
R
www.respiraide.com
3
4
4h
TIMER
2h
1h
H
SPEED
M
L
AUTO
1.2
POWER
ION
R
Model No.200T
1.1
5
19
6
16
7
18
17
15
8
9
10
Bottom of the Unit
11
20
23.7
13
12
14
24
23.6
21
23.5
23.4
23.3
22
23.1
23
23.2
25
POWER
E-12
SPEED
AUTO
TIMER
NEG.ION
PART NAMES AND DESCRIPTION
NAMES OF PARTS
1.Top Plastic Cover (Outlet)
1.1 Remote Control Receiver
1.2 Control Panel
1.3 Gas Sensor
1.4 Display Circuit Board
1.5 Outlet Metal Mesh
2.Fan Blades and Fan Blower
3.Fan Motor
4.Unit Handle
5.UV Light Stainless Steel Reflactor
6.Photo catalyst
7.Electrostatic Discharge Switch
8.Front Panel (Intake) Hook
9.Caster
10.Unit Contact Board
11.Fuse and Fuse Holder
12.High Voltage Generator (Power Supply)
13.Unit Terminals
14.Main Circuit Board
15.Interlock Switch (Microsafety Switch)
16.UV Light Protection Plate
17.UV Lamp and Lamp Holder
18.Power Cord and Strain Relief
19.Unit Upper Cover
20.Pre-filter
21.Front Panel (Intaker)
22.Interlock Switch (Microsafety Switch) Actuator
23.Electronic Cell
23.1 Cell Contact Board and Terminals
23.2 Square Type Cell Insulator
23.3 Round Type Cell Insulator
23.4 Ionizing Wire
23.5 Collecting Plate
23.6 Air Flow Mark
23.7 Cell Handle
24.Activated Carbon Filter (Post filter)
25.Remote Control
E-13
UNIT DISPLAY
Activated Carbon Filter
Replacement Indicator Light
FILTER
CHECK
Check Indicator Light
UV LAMP
Gas Sensor(Odor Sensor)
R
UV Lamp Replacement
Indicator Light
www.respiraide.com
4h
2h
Timer Button and
OFF Timer Display
Indicator Lights
TIMER
1h
H
M
Fan Speed Button
and Indicator Lights
SPEED
L
Auto Operation
Indicator Light
AUTO
POWER
ON/OFF Button
ION
Negative Ion Indicator Light
Model No.200T
Remote Control Receiver
E-14
BEFORE OPERATION
Remote Control Setup
Preparing the remote control
The battery is already set in the remote control,pull out the clear sheet from the battery cover
before using.
How to use the remote control
a)Point the transmitter of the remote control towards the receiver of the main unit.If an
obstruction to the signal exists,the remote control will not operate.
b)The distance from which the remote control can transmit is approximately 19 feet(6m).
www.respiraide.com
+
CR2025 Battery
Battery Information
1.Open the cover on the rear of the remote control towards the arrow.
2.Replace the battery with CR2025 battery.Be sure to set the battery with the+ side of the cover.
3.Close the cover to its original position.
4.The battery for this remote control is for initial use only.Change the battery when necessary.
5.When not using the unit or remote control for an extended period, remove the battery.
6.Store the battery where babies and children can not reach them.If the battery is
swallowed contact a doctor immediately.
7.When discarding battery,cover the terminals of the battery with tape.If mixed with other metal or
batteries,heat,explosion or combustion may occur.
8.Bring the battery to a nearby electronics store,watch store or camera store to recycle them.
Remote Control
1.Do not drop or place the remote control in water.(Damage may occur.)
2.Do not press the remote control buttons with sharp objects.(Damage may occur.)
3.The signals may not be received well if electronic lighting style fluorescent lamps (such as
inverter fluorescent lamps) are in the same room.
E-15
OPERATION
Main Unit Operation
1
FILTER
CHECK
Connect the Power
When the power plug is inserted
into the wall outlet all the
indicators on the display panel
will light up for 2 seconds.
UV LAMP
R
www.respiraide.com
4h
2h
TIMER
1h
2
H
M
SPEED
Operating the Unit
Press the POWER(ON/OFF)
button to start operating the
unit.Pressing the Button again
will stop operation.
NOTE: When the power is
connected, the "CHECK"
indicator light will turn green
and when the unit starts to
run,it will go out.
L
AUTO
POWER
ION
Model No.200T
3
4
Setting the Operation Time
Press the "TIMER" Button to select
the time for operation.Each time it is
pressed the timer setting switches
as shown below:
"1h"---"2h"---"4h"---(Cancel)
NOTE: When the set time is
reached,the operation will
automatically stop.The set time can
be changed if the button is pressed
while the time is operating.
Manually Switch the Airflow Rate
Each time the SPEED Button is pressed the
airflow rate changes as shown below:
L(Low)------M(Medium)------H(High)-----AUTO( Automatically operate)
AUTO Operation
The fan speed is automatically
switched(HIGH,MEDIUM,LOW)
depending on the amount of pollution in
the air.The sensor detects the pollution
and automatically sets the fan speed for
efficient air purification.
NOTE: At automatic mode, the indicator
turns yellow.
E-16
Press the
SPEED
Button
until the
desired
control is
activated.
OPERATION
FILTER Indicator Light
When the"FILTER " light
flashes red,the carbon filter
needs to be replaced.
Indicator Lights
UV LAMP Indicator Light
When the"UV LAMP" light
flashes red, it tells the time for
UV lamp to be replaced.
FILTER
CHECK Indicator Light
Once the "CHECK" indicator
light flashes red,a checkup is
required.
CHECK
UV LAMP
R
www.respiraide.com
4h
2h
TIMER
1h
Sensor Sensitivity
The unit's sensitivity to
odors can be adjusted.This
setting is factory set to
"Normal", and it is
recommended that you use
the unit in this setting.Gas
sensor detects odors such
as tobacco smoke,pets,
cosmetics,etc.
H
M
SPEED
L
AUTO
POWER
ION
Model No.200T
Negative Ion Discharge Indicator Light
When the indicator light is green, negative ions are
discharged.The negative ion generation is
controlled by remote control. One press of the
"ION" Button on the remote control will stop the
generation of ions and the light will go out.
E-17
OPERATION
Operation available with
the Remote Control:
.AIR FLOW
.OFF TIMER
.AUTO
Remote Control Operation
Transmitter
POWER(ON/OFF) Button
The unit will start operating when
the POWER Button is
pressed.Pressing the button again
will stop operation.
AUTO Button
At AUTO mode,the fan
speed is automatically
switched (H,M,L)
depending on the
amount of pollution in
the air.
SPEED Button
The fan speed can be
switched among Low,
Medium and High settings.
TIMER Button
The set time switches every
time the button is pressed as
shown below.
1hour
2hour
www.respirade.com
Cancel
.NEGATIVE ION ON/OFF
.RESET1
.RESET2
4hour
ION Button
When pressed, the
generation of ions will
cease and the Negative
ion generator light on
the control panel will go
out.
**The indicator light shows
the set time.
RESET1 Button(Filter Reset Button)
After replacement of Activated Carbon
Filter,make sure to press the button 12
times for initialization.
Before pressing the Filter Reset Button,
be sure that the unit is plugged in.
RESET2 Button(UV Lamp Reset Button)
After UV lamp replacement ,ensure to
press the button 12 times for initialization.
Before pressing the Filter Reset Button, be
sure that the unit is plugged in.
Remote Control Use
1.Operate with the remote control facing the main unit receiver.
2.The signal range is about 19 feet (6 m).
3.Make sure there are no objects blocking the path of the signal.
4.Avoid dropping or damaging the remote control.
5.Do not use it in high humidity conditions or in direct sunlight or near a heat source.
E-18
CARE AND MAINTENANCE
WARNING
To reduce risk of electric shock always unplug before maintenance.
To maintain optimum performance of this air purifier, please clean the unit including the filters periodically.
When cleaning the unit, be sure to unplug the power cord, and never handle the plug with wet
hands. Electrical shock and/or bodily injury may occur as a result.
Main Unit
To prevent dirt or stains on the main unit, clean as often as necessary.if stains are allowed to remain, they may
become difficult to remove.Wipe with a dry, soft cloth for stubborn stains or dirt, use a soft cloth dampened with
warm water.Do not use volatile fluids,Benzene, paint thinner, polishing powder,this may damage the surface.
Do not use detergents ,detergent ingredients may damage the unit.Keep the unit away from water.
Cleaning the Pre-filter
To assure optimum performance the Microbiologic and
electronic precipitator must be cleaned regularly-every one
to six months.Washing frequency will vary depending on the
number of family members,pets,activities( such as cooking
or woodworking) and smoking habits.Use the wash
reminder schedule provided with the air purifier.
1.Open Front Panel
Hold the front panel upper portion( left and right side) and
pull the front panel toward you.
2.Remove the Microbiological Pre-filter
Remove by pulling out in front while holding the front
panel.
3.Clean the Microbiological Pre-filter
After using a vacuum cleaner to remove any dust,clean
with water.If it is very dirty, use a soft brush or a neutral
cleaner to clean then dry well in the shade.
Pull out in front to remove
Pre-filter
Magnetic
Catcher
WARNING
When opening the front
panel, be careful not to
tip over the unit.It may
cause personal injury.
After cleaning,make
sure to dry the Prefilter thoroughly before
reinstalling.If the prefilter is wet, it can
cause breakdown of
the unit or personal
injury.
Different kinds of Pre-filters
E-19
CARE AND MAINTENANCE
Cleaning the Electronic Cell
Remove the electronic cell
a)Stop the operation and unplug the power plug from the electrical outlet.
b)Open the front panel.
c)Remove the electronic cell.
How to clean the electronic cell
a)Use a large enough container,such as a laundry tub or
trash container.
NOTE: Sharp corners on the cells can scratch the surface of a
bathtub.
b)Dissolve about 3/4 cup of automatic dishwasher detergent
per cell in enough hot water to cover the cells.If the
detergent does not dissolve readily,or form a scum on the
water,try another brand,or use softened water.
c)After the detergent has completely dissolved,place the cells
in the container and let soak for 15 to 20 minutes.Agitate up
and down a few times,and remove.
CAUTION
1. Do not splash the detergent solution in
eyes.Wear rubber gloves to avoid prolonged
detergent contact with skin.
2. Keep detergent and solution out of reach of
children.
3. When cleaning be careful not to cut your hands
on the ionizing line.(Wearing rubber gloves is
safer.)
4. Be careful not to snag or cut the ionizing line.If
the ionizing line is cut,request the dealer to
replace it.If the unit is operated with the ionizing
line cut,there will be no dust collection.
5. Slide in the cell so the airflow arrow points
downstream.
6. After cleaning,make sure to dry the cell
thoroughly before reinstalling.If the cell or Prefilter is wet,it can cause breakdown of the
unit or personal injury.
Electronic Cell
Washing cell at car wash
Washing cell
in the container
E-20
CARE AND MAINTENANCE
Replacing the Activated Carbon Filter
Replace the Activated Carbon Filter when the"FILTER"
indicator light flashes in red.
1)Stop the operation and unplug the cord from the electrical
outlet.
2)Open the front panel.
3)Remove the Activated Carbon Filter.
Photo catalytic Filter and UV Germicidal Lamp
1.Photo catalytic filter is permanent, never needs
replacing.
When there is dust on it, clean the dust off using a
vacuum cleaner dusting brush. Do not wash it in
water.
2.When the "UV LAMP" indicator light flashes ,it is time
to replace the Ultraviolet germicidal lamp. Gently
rotate the lamp a quarter turn in either direction until it
unlocks from the socket.Pull the pins out the sides of
the socket,one end at a time.
Activated Carbon Filter
NOTE:
1)Do not wash the photo catalyst filter in water.
2)Do not look at the UV lamp when it is lit,it can cause
personal injury.
WARNING
Photo catalytic Filter
UV Germicidal Lamp
Replacing UV lamp
CAUTION
After replacement of Activated Carbon filter or UV lamp, be sure to press
Filter Reset Button(RESET1 Button) or UV Lamp Reset Button(RESET2)
on the remote control for 12 times.Once the Reset Buttons have been
activated, you will hear a beep sound that means that the unit has been
reset and the FILTER or UV LAMP indicator lights will stop to flash.
E-21
Germicidal Light Radiation
Hazard
Never look directly at UV lamp or
place face directly on outlet grille.
Direct exposure to germicidal light
can cause temporary or chronic
damage to your eyesight,or even
blindness.
Always unplug the unit before
cleaning, servicing or replacing the
UV lamp.
TROUBLESHOOTING
The system does not
operate at all
When functions do not
work
Automatic function
does not work properly
When other problems
in terms of functions
are found
Power failure?
Check other electrical appliances.
Power plug disconnected?
Make sure to insert the plug.
The FUSE out of order?
Replace the FUSE with new one.
Front panel open?
The unit does not operate when the front panel is
detached.Install properly.
Is the CHECK light flashing?
If so, call the Customer Service.
There is too much dust on the
Pre-filter,electronic cell, carbon filter?
Clean the filter or replace it.
There is too much dust on the
electronic cell?
Wash it and dry completely before installing it.
The air inlet or outlet blocked?
Get rid of foreign materials around the product.
There is too much dust on the
sensor?
Remove dust on the sensor.
There is no dust on the sensor.
Call the Customer Service.
Check the problems first and then unplug the power cord.Call the Customer Service to
ask for after-sale service or make inquiries.
E-22
B
A
D
C
F
E
Black
Black
Red
Y. Green
Green
Negative ion
generator
E-23
White
UV lamp and ballast
Fan motor
White
Pink white
Speaker
High voltage
generator
Red
Ver.2.0
Red
Yellow green
Electrostatic
discharge switch
Yellow Green
Ionizer
Collector
Electronic cell
JZ11
Red
H
JZ8
M
C
White
White
L
Yellow
Black
Blue
JZ18
JZ10
JZ17
Model No.RespirAide200T
JZ1
Black
(-)
Red
(+)
Green
Green
JZ15 JZ16
JZ6
White
Black
Gas sensor
Fuse
120V/60Hz
RespirAide Tech Inc.
Interlock switch Green
Interlock switch
Remote control receiver
JZ4
Transformer
Control board
Power supply board
Wiring Diagram
WIRING DIAGRAM
RespirAide Tech Inc.
Add:13-100 Hanlan Road
Woodbridge, Ontario Canada
L4L 4V8
Tel: 1-866-874-2532
Fax: 1-905-850-5553
www.respiraide.com
RespirAide reserves the right to revise or modify products and/or specifications
without notice.The contents of this manual are subject to change without notice.
R
0612-1-500 Rev.0