typ modelu:
CDE12X
Kod handlowy:
27226
Informacje Główne
Przewodnik Dokumentacji Technicznej
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Możesz tutaj odnaleźć podstawowe informacje ułatwiające korzystanie z dokumentacji technicznej
1. Modele tej samej gamy posiadają wspólne rysunki, które przedstawiają najbogatszy zestaw części; generalnie wybrany model
niekoniecznie posiadać będzie w spisie częsci wszystkie pozycje przedstawione na rysunku
2. Niektóre części nie mogą być przedstawione bezpośrednio na rysunku (instrukcje użytkownika, zestawy montażowe itd..).
Można je odnaleźć w liście części pod pozycją gdzie są zainstalowane lub pod pozycją 09
3. W prawym górnym rogu każdego rysunku widnieje numer seryjny wskazujący początek produkcji danej gamy urządzeń.
Niektóre modele mogą posiadać więcej niż jeden rysunek dla podanej kategorii, każdy inny dla róznych numerów seryjnych.
4. Rysunki złożeniowe mogą wymagać dalszych uaktualnień po ich publikacji. Nowe części zostaną dodane do odpowiednich
oznaczeń numerycznych rysunku. Oznaczenie kodowe modyfikacji rysunku zawarte jest w ostatnich 4 cyfrach numeru seryjnego
przedstawionego w prawym górnym rogu rysunku.
5. Lista części odnosząca się do danego rysunku zawiera spis części tylko dla wybranego modelu; dostępne są dodatkowe
informacje dla każdej części.
REF. Numer referencyjny do tabeli; SUBSTUTUT: lista części które zastępują dany kod zachowując takie same charakterystyki
funkcjonalne
KOD HANDLOWY: lista wariantów modelu (pokazana w nazwie modelu) gdzie dana część jest zastosowana; UWAGA: kod
informacji potrzebny do interwencji, prześledź zmiany aby poprawnie ustalić kod części
6. Niektóre notatki techniczne są ogólne dla danej sekcji, zatem nie mogą być związane tylko konkretnej części. Aby poruszać się
w dokumentacjach modelu sprawnie, pomocne jest czytanie notatek i monitorowanie uaktualnień dokumentacji.
7. Okładka dokumentacji technicznej przedstawia model sprzętu oraz jego kod handlowy.
mod.CDE12X
page 2
1140130
mod.CDE12X
rysunki
page 3
1140130
Lista części
Ref.
kod
Od S/N
Do S/N
Zamiennik
opis
000
C00056262
1 x C00087354
installation hinge kit
000
C00084868
door fixing - template
000
C00087868
upper cover
000
C00087967
user instructions booklet i-gb-f-d
000
C00087968
user instructions booklet nl-e-p
001
C00084883
002
C00084808
Notatka
kod
cabinet cover
1 x C00090573
cabinet white
n1040276
1 x C00116543
002
C00090573
1 x C00116543
cabinet white
003
C00065186
1 x C00091882
sworzeń obrot. kasety 108.5x5
004
C00087813
control panel + handle
005
C00084811
pushbutton white
006
C00087812
tarcza pokrętła timer 'cde12x'
007
C00084812
components / timer knob white
n1040241
007
C00087814
pokrętło timera biał. kit 'cde12x'
n1040241
008
C00064512
pokrętło temperatury biał.
008
C00082822
pokrętło (zestaw) temporizzatore
010
C00045655
podkładka regulacji magnetycznej
011
C00033428
magnes 'parallelogramma'
012
C00045656
wspornik magnetyczny 's-
013
C00024221
pierścień benzing d.4
014
C00087818
1 x C00116585
door frame and glass assy
015
C00065250
1 x C00116580
zestaw otwier. drzwicz.'lvb2000'
016
C00056248
1 x C00087353
rubber buffer h=25,5 mm grey
017
C00056261
018
C00055738
019
C00055735
020
C00084810
021
C00084867
022
C00074149
023
C00064541
zawias drzwiczek 180['lvb2000'
024
C00065185
śruba m4,5x8 timer oraz
025
C00046666
kołnierz rury spustowej'ab636tx'
026
C00003144
nakładka na otwór d.11 mm
026
C00065871
nakładka na otwór
mod.CDE12X
1 x C00087814
zawias drzwi 'lb6tit'
2 x C00087348
podstawa zawias grubość 7,8 mm
wspornik zawiasu
1 x C00110512
foot - rear m8 x 37 mm
zestaw podstawy umyw. do
1 x C00256725
śruba m4x9 tesrfr
n1040349
page 4
1140130
Lista części
Ref.
kod
Od S/N
Do S/N
Zamiennik
opis
027
C00064501
1 x C00099313
płyta tylna biała'lvb2000'
028
C00084817
zatyczka pom. hardware
029
C00046667
ogranicznik kabla 'ab636tx'
029
C00064550
drain hose holder
029
C00091904
cable clamp hose
032
C00064539
płyta zawias 'lvb2000'
033
C00085004
1 x C00084867
door strip - white
035
C00086464
1 x C00087348
rozpórka zawiasu grubość 3mm
Notatka
kod
n1040282
80272260000
1 x C00116923
80272260030
1 x C00087350
1 x C00087353
036
C00058277
037
C00058030
037
C00058278
099
C00077411
mod.CDE12X
1 x C00058030
bolt plate
zestaw ustalaj. magnesu'lb12'
1 x C00058030
bolt plate support
opakowanie zestawu '46lt-soc'
page 5
1140310
mod.CDE12X
rysunki
page 6
1140310
Lista części
Ref.
kod
001
Od S/N
Do S/N
Zamiennik
opis
Notatka
C00064563
kabel zasilający 3x1 schuko 1,5 m
n1040276
001
C00091633
kabel zasil.3x1 schuko 1,5m+filtr
002
C00019902
wspornik rury spustowej spiraln.
003
C00027466
rura spustowa spir.strony pompy
005
C00058465
wyłącznik (double pole) on-off
005
C00075445
wyłącznik na
kod
n1040229
n1040246
005
C00088394
wyłącznik na idc
006
C00064559
filtr tłumiący + listwa
007
C00083916
programator elbi 1665 rast.2 8
008
C00057635
lampka kontrolna czerw. otwory
n1040229
008
C00074501
lampa kontrolna czerwona 12 v
n1040229
008
C00086663
lampka kontrolna czerw. 12v rast
008
C00089025
010
C00064537
011
C00057242
011
C00085195
013
C00065733
wspornik opisu programów 'al89x'
014
C00080666
presostat 1l.+zabezp.przed
014
C00088393
presostat 1l.+ 90-65 zabezp.przed
014
C00092262
015
C00046154
016
C00046148
017
C00064529
lej 'lvb2000'
017
C00092176
lej do kasety obrotowej evo ii
018
C00041785
1 x C00144077
rura syfonu 540 mm.'wdn2067wf'
018
C00092170
1 x C00041785
rura presostatu l=470 mm evo ii
019
C00019755
020
C00064532
020
C00092173
syfon dla rury oko
021
C00064530
clip-pressure switch tube
022
C00011140
mikroelement opóźniający
022
C00056511
self-tapping screw 8p x 12,7 zc
022
C00085194
mikroelement opóźniający idc 3
023
C00053573
sonda-temperatury dialogic biał.
mod.CDE12X
lampka kontrolna czerw. 230v
1 x C00263210
support - pressure switch
potencjometr 8 zakres.
1 x C00143096
potencjometr 8 zakres. idc rast 2,5
1 x C00110327
prestostat 1l 70-45+zabezp.przed
1 x C00281253
pojemnik na detergent obrot. zest.
80272260000
n1040282
80272260000
80272260030
pokrywa dodatki niebieska
n1040282
80272260000
80272260030
n1040282
80272260000
80272260030
anti-vibration bush (foam)
1 x C00092173
air trap
n1040282
80272260000
80272260030
n1040229
page 7
1140310
Lista części
Ref.
kod
Od S/N
Do S/N
Zamiennik
opis
Notatka
kod
024
C00014917
uszczelnienie termostatu'ls312
024
C00020181
zatyczka otworu termostatu 'ar414'
026
C00045027
filtr pompy zestaw
027
C00080667
pompa samoczysz.kom.wstęp.
n1040282
80272260000
027
C00092264
pompa kom.wstęp.wd
028
C00074152
bolt m6x30
028
C00084029
bolt motor m6x34
029
C00074151
tuleja sworznia silnika
030
C00074153
spacer motor support l= 187 mm
032
C00040932
035
C00043430
1 x C00097257
obrotomierz siln.ice
035
C00047317
1 x C00196539
szczotk. siln.ice
035
C00074221
silnik kolektora 1200 obr.'lvb2000'
n1040258
036
C00064556
opornik z termobezpiecznikiem
n1040300
036
C00066086
opornik z termobezpiecznikiem
037
C00087971
80272260030
nakrętka samoblokująca m6
1 x C00092718
eeprom cde12x 80272260000
80272260000
80272260030
n1040282
80272260000
n1040300
037
C00092718
038
C00080668
1 x C00093153
eeprom cde12x software
moduł pot. bez eeprom
038
C00089416
1 x C00093158
moduł zasilający idc bez eeprom
039
C00066292
039
C00077454
1 x C00084566
housing seriale lb2000-pc white
039
C00084943
1 x C00099862
serial cable lb2000 - pc
80272260030
n1040229
insulated tweezers
n1040211
n1040317
040
C00046152
041
C00046157
zatyczka pojemnika na deterg
042
C00087972
hopper cover 1e 3u 3ev
043
C00064534
uszczelnienie leja'lvb2000'
043
C00087975
elektrozaw. potrójny 1we-3wy
044
C00005572
uszczelnienie rura doprow.
045
C00005781
filtr rura doprow.
046
C00003070
rura doprowadzająca 1,5m
047
C00084840
electrovalve support 1 ev
048
C00087816
wiring
n1040276
048
C00090778
wiring
n1040229
mod.CDE12X
1 x C00287239
zbiorniczek na dodatki do kasety
page 8
1140310
Lista części
Ref.
kod
056
C00058523
zestaw prowadnica opor. 'als748tx'
058
C00009416
y junction (water inlet fork)
059
C00075941
wspornik modułu 'lb2000'
062
C00092412
zacisk
063
C00008612
tube clamp 34,6-36,4
mod.CDE12X
Od S/N
Do S/N
Zamiennik
opis
Notatka
kod
page 9
1180230
mod.CDE12X
rysunki
page 10
1180230
Lista części
Ref.
kod
Od S/N
Do S/N
Zamiennik
opis
001
C00064786
1 x C00143260
śruba m8x23 torx tefl
002
C00013563
łożysko 25 x52 x 15 6205 - 2z skf
003
C00051737
śruba torx m8 x 27 dri-
003
C00064785
004
C00002591
łożysko 20x47x14 6204 skf
004
C00044765
łożysko 6206-2z '1100-1200 obr.'
1 x C00193879
Notatka
kod
śruba m8x22 tb6lt'al68x'
80272260030
n1040300
n1040371
005
C00082696
pierścień uszczelniający v4-406
n1040300
n1040371
005
C00096186
pierścień uszczelniający cv4 30 x
n1040300
80272260030
n1040326
006
C00080651
1 x C00032847
listwa poprz. tylna 'wd2000'
1 x C00114387
1 x C00114390
1 x C00145190
007
C00075326
washer m8.5x35x3
008
C00055018
podkładka stożkowa ząbkowana
009
C00014342
śruba m8x75 te
010
C00087811
upper counterweight 8.2 kg
011
C00080761
012
C00064515
anchorage pad - suspension
013
C00080652
śruba m8x36 tefl. zig. p/p'wd2000'
014
C00080650
listwa poprz. przednia 'wd2000'
015
C00080653
spacer
016
C00074182
016
C00080660
017
C00064536
018
C00080762
uszczelnienie drzwiczek 'wd2000'
n1040291
018
C00094091
uszczelnienie drzwiczek 28-30
n1040291
019
C00064546
pierścień przedni'lvb2000'
020
C00064547
pierścień napinający
020
C00092155
pierścień napinający tylny
021
C00064516
021
C00092178
przeciwwaga przednia evo ii
022
C00064531
mieszek odpowietrz. 'lvb2000'
mod.CDE12X
1 x C00064517
tank cradle channel-top dx wd
1 x C00064502
spring ring
1 x C00086430
hose - detergent recovery
suspension spring - tank
1 x C00092178
przeciwwaga przednia 'lvb2000'
80272260030
n1040291
80272260030
n1040291
80272260030
n1040282
80272260000
page 11
1180230
Lista części
Ref.
kod
023
C00064518
023
C00093848
024
C00030443
Od S/N
Do S/N
Zamiennik
opis
Notatka
1 x C00093848
cradle outer- set
n1040286
cradle outer- set
n1040325
1 x C00047136
nut romob m8
kod
80272260030
80272260030
1 x C00144571
024
C00030680
1 x C00040130
nakrętka samohamowna m 10
025
C00065152
nakrętka obr.-ruch. m6x22x1,5
026
C00066184
amortyzator 120 n'lvb2000'
026
C00086372
amortyzator 120n (11105)
026
C00093885
amortyzator 120 n otwór 8,15 mm
027
C00064789
1 x C00268109
ubijak wyjmowany bębna. 46
029
C00080661
1 x C00094097
zespół zbiornika 46 l. cv5-b5
1 x C00094280
n1040286
n1040286
80272260030
n1040282
80272260000
n1040291
n1040300
029
C00092263
1 x C00094097
outer- set 46 l. cv5-b5 ld
1 x C00094280
n1040291
80272260030
n1040300
n1040371
029
C00094281
1 x C00094275
outer- set 46 l. evo ii
030
C00030446
śruba m10 x 45 zntr
030
C00093750
śruba cynkowana te m8x40
031
C00080654
mieszek poboru deterg. 'wd2000'
032
C00064517
listwa poprz. zbiornika 46 litri
033
C00074213
krzyżak z pierśc. uszczel.
1 x C00094280
n1040300
80272260030
n1040371
n1040286
80272260030
n1040282
80272260000
n1040300
n1040371
033
C00096077
krzyżak z pierśc. uszczeln. cv4
034
C00074211
koło pasowe d=210 mm h=20 mm
035
C00074218
pas l=1046 - 1051 mm h8
036
C00092411
037
C00092174
037
C00094312
039
C00091148
040
C00092273
099
C00033026
mod.CDE12X
1 x C00094908
rura zbiornik-pompa oko induz.
n1040289
80272260030
80272260030
clamp d=79 mm
mieszek poboru deterg. evo ii
1 x C00292523
80272260030
zacisk klucza do rur lato pompa
rura zbiornik-pompa oko evizzate
1 x C00094908
n1040300
80272260030
opakowanie smar amblig ta 100
page 12
1180410
mod.CDE12X
rysunki
page 13
1180410
Lista części
Ref.
kod
Od S/N
Do S/N
Zamiennik
opis
001
C00087921
002
C00080775
003
C00080767
sonda-temperatury 'wd2000'
004
C00080768
o-ring d= 27 x 23,5 x 1,78 wd
005
C00080765
opornik 1200 w 20 v''aicukl
006
C00032847
uszczelnienie dmuchawy
007
C00033210
zacisk fastex 350 mm x 7.8 mm
008
C00032845
obsada regulatora 'ai1248cukl'
009
C00080960
self blocking nut m5
010
C00080959
connection gasket
011
C00080771
rozpórka
012
C00080773
fixing screw for lint filter
013
C00080772
014
C00080774
015
C00080770
Notatka
kod
screw amsp m3.5x30t.e.(s/n
1 x C00199364
1 x C00143947
kabelek bezpiecznika term.
filtr
1 x C00143949
hose clamp
1 x C00143947
kondensator 'wd2000'
1 x C00143949
016
C00080769
017
C00032844
018
C00038358
śruba metryczna m8x16 (z loctite)
020
C00080658
wentylator dla cd (087920-
021
C00054790
screw trilob m5 x 16 tcb t.e. st
022
C00087919
blower manifold kit
023
C00087920
514
C00140821
mod.CDE12X
hose electrovalve condenser
1 x C00255433
1 x C00098711
uszczelnienie kondensatora
motor dryer 230v50hz s/n
śruba m5x16
page 14
Notatki
n1040061: Trouble-shooting.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intervention procedure on 2000 washing machines
1. Reading the error code
The fault on the appliance is signalled via:
1. the continuous rotation of the selector knob
2. the action, for the first 4', of the electrovalve and the drain pump
3. the door becomes unlocked
4. the led flashes:
the number of flashes indicates the fault code; the code should be read as follows:
· each fast flash (2/3 flashes of the led very close together) represents one code value
· the fault code is evaluated by counting the number of flashes occurring at 3/4" intervals from one another
· stop counting when the washing machine waits the equivalent of approximately 8/9" between flashes
· the procedure is repeated by the appliance cyclically
E.g.: F03
(FIGURE NT 00)
2. Autotest
Should the washing machine not be signalling an error, you can check it using a serial key and using a particular autotest cycle,
which is to be activated as follows:
1. bring the washing machine to reset position (coloured ball) for at least 5" and wait until the led flashes on reset mode
2. insert the hardware key into the serial outlet
3. position the switch situated on the key in TEST position
4. wait for the door to lock and for the selector to start turning
5. position the switch situated on the key in PC position
the appliance will carry out the following cycle:
· selector moves on up to position 0 (12h if the appliance has a delay, programme 1 if it has no delay)
· loads the wash electrovalve for approx. 10"
· loads the pre-wash electrovalve for approx. 10"
· loads the wash electrovalve and pre-wash electrovalve at the same time until the pressure switch is on full
· heats up to 30° and moves the motor in both directions
· selector moves on for 9 notches
· drains and spins
· the selector knob stops on one of the reset positions
· STOP
mod.CDE12X
page 15
The test cycle can be repeated as many times as you wish following the same procedures
The test cycle can be interrupted by positioning the selector knob on one of the reset positions.
3. Intervention in the event of a Fault
In the event of a fault, the procedure to go by is as follows:
F01: Triac Short circuit
Overhaul CNE
Replace Card
F02: Blocked Motor, Short-circuited/Open Tachometry
Overhaul CNE
Overhaul Motor connector
Control CNE Continuity/Motor Connector
Control Motor Windings
Control Tachometry Windings
Replace Card
F03: Open/Short-Circuited NTC Found
Overhaul CNA
Control NTC Wiring
Control CNA/NTC Wiring Continuity
Replace NTC
Replace Card
F04: Overflow and Pressure Switch Empty found at the same time (Pressure Switch stuck on Empty)
Overhaul CN1
Overhaul Pressure Switch Contacts
Control CN1/Pressure Switch Continuity
Replace Pressure Switch
Replace Card
F05: Blocked Pump or Pressure Switch stuck on Empty Found
Overhaul CNF (pump connector)
Overhaul Pump Connector
Control Pump Filter
Control Pump Windings
Change Pump
Replace Card
F06: Selector Error (a part no. cannot be found)
Overhaul CND (selector connector)
Overhaul Selector Connector
Control Selector/CND Continuity
Control Selector Motor
Replace Selector
Replace Card
F07: Resistance Relay Stuck
Overhaul CN1
Overhaul CN1
Overhaul Resistance Connection
Replace Card
mod.CDE12X
page 16
Overhaul Resistance Connection
Replace Card
F08: Resistance Missing or Pressure Switch stuck on Full Found
Overhaul CN1
Overhaul Resistance Connection
Overhaul Pressure Switch Connection
Replace Resistance
Replace Pressure Switch
Replace Card
F09: Machine Setup Error Found
Control Microprocessor Version
Ask for EEPROM Spare Part indicating Microprocessor version
F10: Pressure Switch Empty and Full or neither Empty nor Full Pressure Switch Found
Overhaul CN1
Overhaul Pressure Switch Wiring
Control CN1/Pressure Switch Continuity
Replace Pressure Switch
Replace Card
F11: Pump Feedback Missing
Overhaul CN1
Overhaul CNF
Overhaul Pump Connector
Overhaul Pressure Switch Connector
Control Pump Windings
Replace Pump
Replace Card
F12 SPECIFIC FOR LVB2000 INDESIT EVOLUTION / DIALOGIC.
F12: Lack of Display card-Main Card Communication
1. Check the effectiveness of contacts on CNC Connector Card
2. Overhaul 8-way connector on Display card
3. Check continuity of CNC-CN 8 way connector
4. Replace Main Card
5. Replace Display Card
F13: NTC wiring harness disconnected from the dryer system
1. Check the efficiency of the terminals on the CNA connector board
2. Check NTC wiring harness
3. Check the wiring harness continuity of the CNA / NTC connectors
4. Replace NTC
5. Replace terminal board
F14: Dryer connector open or not connected
1. Check the efficiency of the terminals on the CNI connector board
2. Overhaul CN1
3. Overhaul connector connection
4. Replace the board.Merloni Elettrodomestici
F15: Dryer connector is always active
1. Check the efficiency of the terminals on the CNI connector board
2. Overhaul connector connection
3. Overhaul the pressure sensor connection
4. Replace the connector
mod.CDE12X
page 17
5. Replace pressure sensor
6. Replace the board
F16: Non-functioning basket block
1. Go over connector card CNC
2. Go over connector basket block
3. Control Continuity of cabling CNC / basket block and basket block supply
4. Replace basket block
5. Replace card
N.B.From Fault F01 to fault F11
These are shown by LEDs in stand by/on in LVB2000 machines Ariston/Indesit.
From fault F01 to fault F12
These are shown in a display located on the instrument panel of LVB2000 ma-chines
Evolution Indesit.
From fault F01 to fault F15
Are those that are indicated according to the version via LED stand by/on or
display positioned on the Wash Dry machine Ariston/Indesit panel.
4. Replacing the card
Should you have to replace the card:
· retrieve the EEPROM from the old card
· reassemble the EEPROM onto the new replacement card (without EEPROM)
In the event, and only in this case:
· an F02 has been detected
· the above-mentioned checks have been carried out and no problems have been detected on the wiring or to the motor
· the card fitted onto the washing machine is a 12 or 20 version (the version is indicated by a label on the module-containing box
with SW20 or SW12)
you should:
· fit on a new card (version 32 or above)
· fit on an updated EEPROM to request from the assistance service centre, stating the code (e.g. 80xxxxx0000 or 46xxxxx0000),
the serial number and the washing machine model.
n1040066: LB2000 Hardware (Serial hardware key and Pliers)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
As of 05.04.2000, the following Spare Parts are available from the Warehouse:
Part no.066055 - Serial hardware key for LVB2000 autotest. It has not to be linked to PC. (substituted with 077454);
Part no. 077454 - Serial hardware key for LVB2000-PC White (substituted with 084566);
Part no. 084566 - Serial hardware key for LB2000/EVOI -PC BIANCA (substituted with 095669 LB2000/EVOI, EVOII - PC).
Part no.066292 - Extractor pliers for integrated circuits.
For instructions on use, please refer to the relative Service Manual.
mod.CDE12X
page 18
n1040211: Serial cable to connect the hardware key with the PC.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
To connect the hardware key: LB2000 with the personal computer,you must use
a serial cable, pin to pin 9 pin F/F, to garantee the availability, it was
decided to manage it as a spare part.
The SAT code of the cable (length 2m) is 084943.
n1040229: Items with IDC connectors.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
From November 2001, in order to improve electrical connections on models produced in Teverola and Comunanza plants,
electrical components supplied with IDC connectors have been applied.
New particulars are:
Code 083916 = PROGRAMME SELECT ELBI 1665 RAST.2 8 POS.
Code 085195 = POTENTIOMETER 8 POS. IDC;
Code 083915 = TEMPERATURE SENSOR NTC ELTH;
Code 087823 = CONDUCIBILITY CONTROL CARD IDC;
Code 085194 = DOOR INTERLOCK IDC;
Code 080662 = PUSH BUTTON SWITCH NA ON OFF;
Code 088394 = PUSH BUTTON SWITCH S.CM NA IDC;
Code 086660 = PRESSURE SENSOR 1LEVEL 93 - 68 + ANTI-SPILL;
Code 088393 = PRESSURE SENSOR 1 LEVEL 90 - 65 + ANTISPILL;
Code 087187 = PRESSURE SENSOR 1 LEVELS + ANTI-SPILL;
Code 085193 = PRESSURE SENSOR 1 LEVELS + ANTI-SPILL;
Code 084763 = RED WARNING LIGHT 12 V INDESIT;
Code 086663 = RED WARNING LIGHT 12 V RAST2 ARISTON
Code 087188 = HEATING ELEM.TERMAL CUT-OUT 1700W/230V L= 169,5 mm ;
Code 086661 = HEATING ELEMENT FOR PROBE 1700W 230V L= 212.5 mm;
Code 089416 = MODULE (LESS EEPROM) WM-WD > 1200 RPM.IDC ;
Code 089074 = MODULE (LESS EEPROM) SW 2.22 YELLOW >1200 IDC;
Code 089404 = MODULE (LESS EEPROM) IDC EW-AR-IN<1200.
Code 084838 = MODULE (LESS EEPROM) MODULE UNIV. STRIP SW 220 IDC.
Wires with IDC connectors can be found directly on spare parts list of models to be repared.
This change has not affected EEPROM which remain the same.
To find the right particular to use:
1 – Find the modified particular into spare parts list of model of interest
2 – Check list of models herebelow given and compare with their serial no.
Models related to Comunanza and Teverola plants in alphabetical order.
Models of Communanza factory. by
A1124UK (23572) Matr. 11209.0001;
mod.CDE12X
page 19
A1234UK (22573) Matr. 11217.0001;
A1435SUK (23575) Matr.20502.0001;
A1435UK (23574) Matr.20502.0001;
A1535UK (28069) Matr.20502.0001;
A1635UK (27051) Matr.20502.0001;
AA1000BFR (25700) Matr.11209.0001;
AAX106LFR (25698) Matr. 20121.0001;
AAX116LFR (25591) Matr.20121.0001;
AAX126LFR (25699) Matr. 20121.0001;
AAX149LFR (26286) Matr.20502.0001;
AB104XTK (22504) Matr. 11217.0001;
AB108XEO (26389) Matr.11209.0001;
AB108XIT (22443) Matr. 11203.0001;
AB63XGR (24894) Matr. 11217.0001;
AB65XEO (24492) Matr. 11209.0001;
AB66XIT (26972) Matr. 20121.0001;
AB84XTK (22504) Matr. 11217.0001;
AB88DAG (26561) Matr.20527.0001;
AB88DEX (24898) Matr.20527.0001;
AB88XEO (26388) Matr. 11217.0001;
AB88XEX (23861) Matr. 11217.0001;
AB88XIT (22444) Matr. 11209.0001;
AC106BFR (25817) Matr.20527.0001;
AC120LIT (26836) Matr.20527.0001;
AC128LFR (25818) Matr.20527.0001;
AC80LIT (26835) Matr.20527.0001;
AC96BFR (25816) Matr.20527.0001;
AD1000EX (27764) Matr. 20610.001;
AD1200IT (26694) Matr. 20610.001;
AD1200TK (27199) Matr. 20610.001;
AD1600FR (27157) Matr. 20610.001;
AD1600IT (26834) Matr. 20610.001;
AD1600ITPXU (27163) Matr. 20610.001;
AL107XFR (23684) Matr. 20121.0001;
AL108DAG (24900) Matr.20527.0001 ;
AL108DEX (24901) Matr.20527.0001;
AL108DK60 HZ (24905) Matr.20527.0001
AL108XBE (23648) Matr. 11203.0001;
AL108XSTK (22698) Matr.20121.0001;
AL108XTK (22506) Matr.20121.0001;
AL109SLFR (22495) Matr.20121.0001;
AL109XAUS (26024) Matr. 11217.0001;
AL109XEU (22514) Matr. 11203.0001;
AL109XEX (24734) Matr. 11203.0001;
AL109XIT (22360) Matr. 20121.0001;
AL109XSK (25855) Matr. 11203.0001;
AL118DTK (24902) Matr.20527.0001;
AL128DAUS (24904) Matr.20527.0001;
AL128DEX (24903) Matr.20527.0001;
AL128DSAUS (25742) Matr.20527.0001;
AL128XBE (23656) Matr. 20121.0001;
AL129SLBE (23990) Matr.20121.0001;
AL129XAUS (23864) Matr. 11217.0001;
AL129XEU (22515) Matr. 11202.0001;
AL129XSK (25856) Matr. 11202.0001;
AL129XTK (22507) Matr.20121.0001;
AL12SUK (24363) Matr. 11209.0001;
mod.CDE12X
page 20
AL12UK (23576) Matr. 11209.0001;
AL149XEX (22516) Matr.20502.0001;
AL149XSK (25857) Matr.20502.0001;
AL14UK (23577) Matr.20502.0001;
AL169XAUS (26458) Matr.20502.0001;
AL169XEU (24897) Matr.20502.0001;
AL67HCGR (23885) Matr.11210.0001;
AL68XEX (23863) Matr. 11211.0001;
AL68XIT (22363) Matr. 11126.0001;
AL68XPT (22485) Matr. 11217.0001;
AL68XSPT (22977) Matr. 11217.0001;
AL88DEX (24899) Matr.20527.0001;
AL88XEU (22512) Matr. 11204.0001;
AL88XPT (22482) Matr. 20121.0001;
AL88XSPT (22483) Matr.20121.0001;
AL89XIT (22362) Matr. 20121.0001;
AL89XSEX (24735) Matr. 11203.0001;
AL89XSIT (22445) Matr. 20121.0001;
AL98XSPT (27630) Matr.20121.0001;
ALD10UK (26092) Matr.20527.0001;
ALD12SUK (26094) Matr.20527.0001;
ALD12UK(26093) Matr.20527.0001;
ALS104XFR (22501) Matr. 20114.0001;
ALS109XEO (26392) Matr. 11217.0001;
ALS109XEU (22520) Matr. 11219.0001;
ALS109XIT (22470) Matr. 20114.0001;
ALS129XEU (22521) Matr. 20114.0001;
ALS68XIT (22473) Matr. 11217.0001;
ALS88XEO (26391) Matr. 20108.0001;
ALS88XEU (22519) Matr. 20108.0001;
ALS89XIT (22472) Matr. 20114.0001;
ALS89XSIT (22471) Matr. 20114.0001;
AWD10UK (26095) Matr.20527.0001;
AWD12SUK (26097) Matr.20527.0001;
AWD12UK (26096) Matr.20527.0001;
CDE12X (27226) Matr. 20610.001;
CDE12XUK (27227) Matr. 20610.001;
LBE12X (26961) Matr. 20610.001;
LBE12XUK (27155) Matr. 20610.001;
LBE6X (26968) Matr. 20610.001;
LBE8X (26969) Matr. 20722.0001;
SGE12XUK (27241) Matr. 20610.001;
W104TXSBE (25827) Matr. 20128.0001;
W104TXSTK (24746) Matr. 20121.0001;
W104TXTK (23411) Matr. 20121.000;1
W105TXEX (234403) Matr. 20128.0001;
W105XDE (24835) Matr. 20114.0001;
W106XDE (24836) Matr. 20114.0001;
W108XIT (24820) Matr. 20128.0001;
W108XSP (23405) Matr. 20128.0001;
W1215XSDE (24839) Matr. 20114.0001;
W123SUK (23413) Matr. 20121.0001;
W123UK (23369) Matr. 20121.0001;
W123XNL (23416) Matr. 20121.0001;
W124XDE (24837) Matr. 20121.0001;
W124XNL (23418) Matr. 20114.0001;
W125TXEX (23378) Matr. 20128.0001;
mod.CDE12X
page 21
W125XDE (24838) Matr. 20114.0001;
W125XSDE (24839) Matr. 20114.0001;
W125XFR (24435) Matr. 20128.0001;
W126XDE (24840) Matr. 20114.0001;
W128XSP (24428) Matr. 20128.0001;
W133UK (24026) Matr. 20121.0001;
W133SUK (24518) Matr. 20121.0001;
W143SUK (27059) Matr.20502.0001;
W143UK (27530) Matr.20502.0001;
W143XNL (23170) Matr.20502.0001;
W144XDE (24841) Matr.20520.0001;
W144XNL (23419) Matr.20502.0001;
W144XSNL (24743) Matr.20502.0001;
W145TXEX (23379) Matr.20521.0001;
W145XDE (24842) Matr.20520.0001;
W146XDE (23843) Matr.20520.0001;
W146XSDE (26461) Matr.20520.0001;
W165TXEX (24796) Matr.20502.0001;
W165XNL (24764) Matr.20502.0001;
W166XDE (26464) Matr.20520.0001;
W682XSIT (24813) Matr. 20114.0001;
W683XGIT 24812) Matr. 20114.0001;
W68XIT (24408) Matr. 20114.0001;
W68XSIT (24409) Matr. 20114.0001;
W842XSIT (24818) Matr. 20128.0001;
W843XGIT (24820) Matr. 20128.0001;
W84TXEX (23401) Matr. 20114.0001;
W84TXTK (23410) Matr. 20121.0001;
W84XSP (23409) Matr. 20114.0001;
W84XSP (24469) Matr. 20114.0001;
W857XSPT (26661) Matr. 20128.0001;
W857XSPT (26661) Matr. 20128.0001;
W88XIT (23395) Matr. 20128.0001;
WA10XIT (26883) Matr. 20128.0001;
WA6XIT (26881) Matr. 20114.0001;
WA8XIT (26882) Matr. 20128.0001;
WA8XSIT (26919) Matr. 20128.0001;
WAS6XIT (27052) Matr. 20204.0001;
WAS8XIT (27053) Matr. 20205.0001;
WD104TEX (24908) Matr. 20603.001;
WD105TEX (24909) Matr. 20603.001;
WD105TEX220-60 (27603) Matr. 20603.001;
WD106FR (25691) Matr. 20603.001;
WD10UK (25056) Matr. 20603.001;
WD118SP (26335) Matr. 20603.001;
WD11UK (25058) Matr. 20604.001;
WD125TEX (24910) Matr. 20604.001;
WD125TSEX (27152) Matr. 20604.001;
WD12SUK (25538) Matr. 20604.001;
WD12UK (25057) Matr. 20604.001;
WD12XUK (27233) Matr. 20610.001;
WD84EX (24906) Matr. 20603.001;
WD84TEX (24907) Matr. 20603.001;
WDE12X (27232) Matr. 20610.001;
WE105XR (26953) Matr. 20603.0001;
WE10UK (24459) Matr. 20603.0001;
WE11UK (24460) Matr. 20603.0001;
mod.CDE12X
page 22
WE125XEX (24789) Matr. 20603.0001;
WE12SDE (27149) Matr. 20610.001;
WE12SUK (24462) Matr. 20603.0001;
WE12SUK (27154) Matr. 20610.001;
WE12UK (24461) Matr. 20603.0001;
WE12XNL (24762) Matr. 20603.0001;
WE13UK (24463) Matr. 20603.0001;
WE145XEX (24792) Matr. 20610.001;
WE14DE (27080) Matr. 20610.001;
WE14SDE (27150) Matr. 20610.001;
WE14SUK (27153) Matr. 20610.001;
WE14UK (24464) Matr. 20610.001;
WE14XNL (24763) Matr. 20610.001;
WE14XSNL(27752) Matr. 20610.001;
WE16DE (27151) Matr. 20610.001;
WE16UK (25162) Matr. 20610.001;
WE16XNL (27765) Matr. 20610.001;
WE8XR (26952) Matr. 20603.0001;
WES9XR (26892) Matr. 20603.001;
WH96TXE (25376) Matr. 20128.0001;
WS105TXEX (23356) Matr. 20205.0001;
WS682XSIT (24826) Matr. 20204.0001;
WS683XGIT (24822) Matr. 20204.0001;
WS84TXEX (23355) Matr. 20204.0001;
WS88XIT (23349) Matr. 20205.0001;
Models of Teverola factory.
AB103TK (27113) Matr. 20408.0001
AB104IT (27913) Matr. 20408.0001;
AB107PT (27094) Matr. 20408.0001;
AB63EX (23909) Matr. 20408.0001;
AB83TK (22503) Matr. 20408.0001;
AB84IT (27914) Matr. 20408.0001;
AB84PT (22484) Matr. 20408.0001;
AB95AUS (23879) Matr. 20408.0001;
AB95EU (23781) Matr. 20408.0001;
AL102PFR (27299) Matr. 20408.0001;
AL109K (23910) Matr. 20408.0001;
AL10UK (23590) Matr. 20408.0001;
AL65PT (27093) Matr. 20408.0001;
LNA855FR (27595) Matr. 20325.0001;
W103NL (24600) Matr. 20314.0001;
W103TTK (23337) Matr. 20408.0001;
W103UK (23334) Matr. 20408.0001;
W104DE (24834) Matr. 20408.0001;
W104FR (23340) Matr. 20408.0001;
W104NL (23386) Matr. 20408.0001;
W104SP (24415) Matr. 20325.0001;
W104TBE (25474) Matr. 20408.0001;
W104TEX (23332) Matr. 20408.0001;
W105FR (27700) Matr. 20408.0001;
W113UK (23335) Matr. 20408.0001;
W63TAUS (25885) Matr. 20408.0001;
W63TEX (24768) Matr. 20408.0001;
W73FR (23329) Matr. 20408.0001;
W83DE (24833) Matr. 20408.0001;
W83NL (24599) Matr. 20313.0001;
mod.CDE12X
page 23
W83SP (23317) Matr. 20312.0001;
W83TAUS (25886) Matr. 20408.0001;
W83TEX (23310) Matr. 20318.0001;
W83TK (23320) Matr. 20408.0001;
W83TTK) (23321) Matr. 20408.0001;
W83UK (23302) Matr. 20408.0001;
W85FR (27699) Matr. 20408.0001;
W93TEX (23308) Matr. 20408.0001;
W93UK (23330) Matr. 20408.0001;
W9521E (25379) Matr. 20408.0001;
WA10IT (26880) Matr. 20408.0001;
WA10PT (27641) Matr. 20408.0001;
WA6IT (26878) Matr. 20408.0001;
WA6PT (27639) Matr. 20408.0001;
WA8IT (26879) Matr. 20408.0001;
WA8PT (27640) Matr. 20408.0001;
WP100EX (27761) Matr. 20408.0001;
WP67EX (27757) Matr. 20402.0001.
n1040241: Indivisible timer knob and push-push mec
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
From serial number 20305.0001, the component knob / selector code 084812 is provided with internal flaps, which ensure a
perfect assembly of the knob and push-push mechanism on the built-in washing machines. This prevents the knob from coming
off when the plastic material becomes soft due to temperature increasing inside the appliance during the drying phase.
To remove the selector knob, proceed exclusively as follows:
1) Using a drill with a 12 mm bit, drill a hole in the centre of the knob (see fig. 1).
2) Using a cross screwdriver, loosen the screw that secures the knob to the selector (see fig. 2);
3) Extract the knob with push-push mechanism from the selector (see fig.2) .
Fit the new knob after fixing with the screw the push-push mechanism (recovered) to the selector shaft.
In the event that the old push-push mechanism cannot be reused, use the kit code 087814 that comprises the following items:
Code 084816 - Push-push mechanism;
Code 087815 - Timer screw 1/2 T4,2X12.7;
Code 047922 - Compression spring;
Code 084812 - Component knob / timer.
Code 087814 replaces the timer knob kit 084815 used on the Built-in Washing Machines, which is managed until stocks run out
and has a different screw code 056511.
The knobs used on the components can be extracted; as spare part they are already assembled with the push-push mechanism.
n1040242: Power card with welded eeprom.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
mod.CDE12X
page 24
From serial number 20304.0001, IDC power card with welded eeprom is used to ensure the perfect connection of all parts, in the
Comunanza, Teverola and Brembate factories.
To replace the module with welded eeprom, it will be necessary to use the eeprom indicated in the SAT document of the model
concerned.
To replace the module on a unit with welded eeprom both the SAT module and the eeprom are required, because the latter cannot
be reused.
n1040246: Button switch NO
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
From serial number 20302.0001, the button switch NO code 088394 is used instead of the premodified switch NO+NO code
075445 (see attached illustration) and the button switch SE-NO code 063971 is used instead of the premodified switch SE-NO
code 058465 (see attached illustration) on washing machine AL68XPT .
Both switches are regularly managed, therefore in case of repair the serial number of the unit must be taken into consideration.
This modification also regards the wiring code 088448 which as with all the LB 2000 models, is managed only by request, i.e.
without stock, in order to always manage the interchangeable one with the last modification.
Due to the simplicity of the modification, the images of the wiring diagrams used remain the same as the IDC wiring diagrams
already available on the WEB.
The modification will be also extended to other models which from time to time will be listed below.
COMUNANZA (Codes 063971 e 08394)
A1124UK (23572) Matr. 20318.0001;
A1234UK (23573) Matr. 20318.0001;
A1324UK (28068) Matr. 20318.0001;
AA1000BFR (25700) Matr. 20318.0001;
AAX106LFR (25698) Matr. 20318.0001;
AAX116LFR (25591) Matr. 20318.0001;
mod.CDE12X
page 25
AAX126LFR (25699) Matr. 20318.0001;
AB104XTK (22505) Matr. 20318.0001;
AB108XEO (26389) Matr. 20318.0001;
AB108XIT (22443) Matr. 20318.0001;
AB63XGR (24894) Matr. 20318.0001;
AB65XEO (24492) Matr. 20318.0001;
AB67XIT (27896) Matr. 20318.0001;
AB84XTK (22504) Matr. 20318.0001;
AB87XIT (27897) Matr. 20318.0001;
AB88XEX (23681) Matr. 20318.0001;
AB88XIT (22444) Matr. 20318.0001;
ABS66XIT (28070) Matr. 20311.0001;
AL107FR (23684) Matr. 20318.0001;
AL108XBE (23648) Matr. 20318.0001;
AL108XSTK (22698) Matr. 20318.0001;
AL108XTK (22506) Matr. 20318.0001;
AL109SLFR (22495) Matr. 20318.0001;
AL109XAUS (26024) Matr.20318.0001;
AL109XEU (22514) Matr. 20318.0001;
AL109XIT (22360) Matr. 20318.0001;
AL109XSK (25855) Matr. 20318.0001;
AL128XBE (23656) Matr. 20318.0001;
AL129SLBE (23990) Matr. 20318.0001;
AL129XAUS (23864) Matr. 20318.0001;
AL129XEU (22515) Matr. 20318.0001;
AL129XEU (22515) Matr. 20318.0001;
AL129XSK (25856) Matr. 20318.0001;
AL129XTK (22507) Matr. 20318.0001;
AL12SUK (24363) Matr. 20318.0001;
AL12UK (23576) Matr. 20318.0001;
AL67XHCGR (23885) Matr. 20318.0001;
AL68X (22363) Matr. 20318.0001;
AL68X (22363) Matr. 20318.0001;
AL68XEX (23863) Matr. 20318.0001;
AL68XSPT (22977) Matr. 20318.0001;
AL68XSPT (22977) Matr. 20318.0001;
AL78XPT (27627) Matr. 20318.0001;
AL78XSPT (27628) Matr. 20318.0001;
AL88XEU (22512) Matr. 20318.0001;
AL88XPT (22482) Matr 20318.0001;
AL88XSPT (22483) Matr. 20318.0001;
AL89X (22362) Matr. 20318.0001;
AL89XSIT (22445) Matr. 20318.0001;
AL98XPT (27629) Matr. 20318.0001;
AL98XSPT (27630) Matr. 20318.0001;
ALS104XFR (22501) Matr. 20311.0001;
ALS109XEU (22520) Matr. 20311.0001;
ALS109XIT (22470) Matr. 20311.0001;
ALS109XIT (22470) Matr. 20311.0001;
ALS129XEU (22521) Matr. 20311.0001;
ALS68XIT (22473) Matr. 20311.0001;
ALS869XIT (24887) Matr. 20311.0001;
ALS88XEO (26391) Matr. 20311.0001;
ALS88XEU (22519) Matr. 20311.0001;
ALS89XIT (22472) Matr. 20311.0001;
ALS89XIT (22472) Matr. 20311.0001;
ALS89XSIT (22471) Matr. 20311.0001;
mod.CDE12X
page 26
L687XIT (24890) Matr. 20318.0001;
L687XIT (24890) Matr. 20318.0001;
LE1069XIT (27895) Matr. 20318.0001;
LE869XIT (24884) Matr. 20318.0001;
LES669XIT (24886) Matr. 20311.0001;
W104TKSTK (24746) Matr. 20318.0001;
W104TXTK (23411) Matr. 20318.0001;
W105TXEX (23403) Matr. 20318.0001;
W105XDE (24835) Matr. 20318.0001;
W106XDE (28089) Matr. 20318.0001;
W108XIT (23402) Matr. 20318.0001;
W108XSP (23408) Matr. 20318.0001;
W123SUK (23413) Matr. 20318.0001;
W123UK (23369) Matr. 20318.0001;
W123XNL (23416) Matr. 20318.0001;
W124XDE (24837) Matr. 20318.0001;
W124XNL (23418) Matr. 20318.0001;
W125TXCH (28194) Matr. 20318.0001;
W125TXEX (23378) Matr. 20318.0001;
W125XDE (24838) Matr. 20318.0001;
W125XFR (24435) Matr. 20318.0001;
W125XSDE (24839) Matr. 20318.0001;
W126XDE (24840) Matr. 20318.0001;
W128XFR (27701) Matr. 20318.0001;
W128XSP (24428) Matr. 20318.0001;
W682XSIT (24813) Matr. 20318.0001;
W683XGIT (24812) Matr. 20318.0001;
W68XIT (24408) Matr. 20318.0001;
W68XSIT (24409) Matr. 20318.0001;
W842XSIT (24818) Matr. 20318.0001;
W843XGIT (24820) Matr. 20318.0001;
W84TXEX (23401) Matr. 20318.0001;
W84TXTK (23410) Matr. 20318.0001;
W84XSP (23409) Matr. 20318.0001;
W84XSP (24469) Matr. 20318.0001;
W857XSPT (26661) Matr. 20318.0001.
W88XIT (23395) Matr. 20318.0001;
WA10XIT (26883) Matr. 20318.0001;
WA10XIT (26883) Matr. 20318.0001;
WA6XIT (26881) Matr. 20318.0001;
WA8XIT (26882) Matr. 20318.0001;
WA8XSIT (26919) Matr. 20318.0001;
WAS6XIT (27052) Matr. 20311.0001;
WAS8XIT (27053) Matr. 20311.0001;
WS105TXEX (23356) Matr. 20311.0001;
WS682XSIT (24826) Matr. 20311.0001;
WS683XGIT (24822) Matr. 20311.0001;
WS68XIT (24594) Matr. 20311.0001;
WS84TXEX (23355) Matr. 20311.0001;
WS88XIT (23349) Matr. 20311.0001;
TEVEROLA (Code 063971)
AB40AG (26350) Matr. 20304.0001;
AB40EX (24733) Matr. 20304.0001;
AB40IT (22468) Matr. 20304.0001;
AB43AG (24364) Matr. 20304.0001;
AB43EX50-60HZ (23907) Matr. 20304.0001;
mod.CDE12X
page 27
AB43IT (22467) Matr. 20304.0001;
AB43PT (22489) Matr. 20304.0001;
AB43SP (23899) Matr. 20304.0001;
AB52PT (27554) Matr. 20304.0001;
AB53AG (27088) Matr. 20304.0001;
AB53EO (23780) Matr. 20304.0001;
AB53EX50-60HZ (23908) Matr. 20304.0001;
AB53IT (22460) Matr. 20304.0001;
AB56FR (22740) Matr. 20304.0001;
AB60IT (26971) Matr. 20304.0001;
AB63IT (22455) Matr. 20304.0001;
AB64AG (24365) Matr. 20304.0001;
AB64AG (24365) Matr. 20304.0001;
AB64PT (22486) Matr. 20304.0001;
AB66FR (22490) Matr. 20304.0001;
BE563IT (24882) Matr. 20304.0001;
W41IT (27758) Matr. 20304.0001;
W432SIT (24806) Matr. 20304.0001;
W432SIT (24806) Matr. 20304.0001;
W435PT (23319) Matr. 20304.0001;
W43FR (23312) Matr. 20304.0001;
W43IT (23299) Matr. 20304.0001;
W43IT (23299) Matr. 20304.0001;
W43SP (27506) Matr. 20304.0001;
W43SP (27506) Matr. 20304.0001;
W43TAG (23323) Matr. 20304.0001;
W43TAG (23323) Matr. 20304.0001;
W43TEX (23306) Matr. 20304.0001;
W43TEX (23306) Matr. 20304.0001;
W44IT (23294) Matr. 20304.0001;
W44XIT (25547) Matr. 20304.0001;
W4521E (25377) Matr. 20304.0001;
W4521E (25377) Matr. 20304.0001;
W535PT (23385) Matr. 20304.0001;
W53FR (25471) Matr. 20304.0001;
W53IT ( 23300) Matr. 20304.0001;
W53SP (23338) Matr. 20304.0001;
W53TEX (24767) Matr. 20304.0001;
W53TEX (24767) Matr. 20304.0001;
W543GIT (25688) Matr. 20304.0001;
W630FR (24613) Matr. 20304.0001;
W634PT (24627) Matr. 20304.0001;
W63FR (23341) Matr. 20304.0001;
W63IT (23295) Matr. 20304.0001;
W63SP (23316) Matr. 20304.0001;
W63TEX (23305) Matr. 20304.0001;
W63XIT (25544) Matr. 20304.0001;
W642TXEX (25548) Matr. 20304.0001;
W64IT (24413) Matr. 20304.0001;
W6521E (25378) Matr. 20304.0001;
WA6IT (26878) Matr. 20318.0001;
WA8IT (26879) Matr. 20304.0001;
WP42IT (27759) Matr. 20304.0001;
WP42IT (27759) Matr. 20304.0001;
WP62EX (27760) Matr. 20304.0001;
mod.CDE12X
page 28
n1040276: Power supply cable + integrally moulded filter.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
All appliances produced in the Comunanza (from serial no. 21008.0001), Teverola (from serial no. 21111.0001) and Brembate
(from serial no. 21119.0001) factories have been equipped with power supply cables with integrally moulded filter (see fig.1 - 1A
and 1B) and new units having a specific opening at the back for fixing the new cables (see fig. 1 - 1C).
The new units, together with the new cables, can be used in place of the premodification ones, by connecting the wiring to the
cable, as shown in figure 1 - 1D.
The codes of the new units and of those replaced (ESI - table n1040276fig02), which will be managed until stocks run out, are
given below.
The new power supply cables are:
Code 091632 - Power supply cable 3x1 schuko 1.5m+capacitance filter;
Code 091633 - Power supply cable 3x1 schuko 1.5m+inductive filter;
Code 091634 - Power supply cable UK 3x1 l= 1950mm + inductive filter;
Code 091635 - Power supply cable UK 3x1 l=1950mm+capacitance filter;
Code 091636 - Power supply cable l=2.55m AUS+inductive filter;
Code 091641 - Power supply cable l=2550mm AG +capacitance filter;
Code 091642 - Power supply cable 1.85mt SHUKO no inductive filter;
Code 091643 - Power supply cable 3x1 (CH) 1.5m+inductive filter;
Code 091645 - Power supply cable 3450mm SOUTH AF.+capacitance filter;
Code 091690 - Power supply cable shuko l2.55m KOREA+inductive filter;
Code 091689 - Power Supply cable l=2550mm AG+inductive filter.
IMPORTANT: the fixing / continuity screw is a specific self-scraping screw (code 092348) that ensures earth continuity between
the filter and the unit. The same screw must be refitted in order to guarantee machine conformity.
The premodification wirings, are also managed for modified products by making the connection to the terminal block of the new
cable as shown in fig. 1 - 1D.
The wiring diagrams given in the Documentation remain unchanged.
mod.CDE12X
page 29
mod.CDE12X
page 30
n1040282: New drainage OKO system.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
From serial number 21219.0001, the new "OKO" drainage system has been introduced on the washing machines produced in the
Comunanza factory.
The last two numbers of the Industrial Code (located on the rating plate) of the models relevant to this note will be 30 (e.g.
80233560130 - see Appendix A)
N.B. The industrial code will not change on the models with induction motor (see following list).
MODEL
INDUSTRIAL CODE
ABS53XIT
80224800000
AB54XPT
80224870100
AB63XEX
80225100100
ABS63XEU
80225180100
WS44XIT
80233440100
WS431TXEX
80233470100
WS642TXEX
80233540100
W63XSP
80233890000
AB53XEU
80238820000
AB65XEU
80238830000
AL 64XSP
80239020100
WS43XIT
80244510000
WS53XIT
80244520000
WH66TXE
80253750100
ABS63XEO
80263900000
The new items are:
- EEPROM (the OKO system requires a new setting of load timing parameters). THE NEW EEPROMS REPLACE ALL THE
ONES CODED PREVIOUSLY.
- BOWL (hopper tube hole shifted forwards);
- DETERGENT LOADING TUBE (see fig. 1);
- PRESSURE SWITCH (changed levels);
- OKO PUMP BOWL BLOWER + BALL (see fig. 2A, 2B and 2C);
- CONDUCTIVITY SENSOR (if provided, it is shorter than the premodification item);
- DRAIN PUMP (without detergent collecting tube connection);
- HOPPER (shifted in front of detergent loading tube connection). Fig. 3A post-modification. Fig. 3B premodification);
- AIR TRAP (different shape);
- PRESSURE SWITCH TUBE (different length);
- DRAIN TUBE STOP (specific);
In particular, the OKO system consists of a spherical plastic component inserted in the tube that connects the bowl to the drain
pump (see fig.2 A).
At the beginning of each wash cycle the washing machine fills water for 10 seconds and activates the drain pump for 2 seconds.
In this way, the water level in the bowl is different from that in the drain tube; this difference increases the thrust of the ball
upwards, closing the bowl-pump connection tube hermetically (see fig. 2D).
This system has the double advantage of:
1) separating the wash water and the water in the drain hose, thus saving energy during the heating phase;
2) and ensuring optimal use of all the detergent.
With the introduction of this new component, the detergent collecting tube is no longer required and the pump has one hole only
to convey water from the tank.
For the correct operation of the OKO system, it is important that the drain hose of the washing machine remains fixed to the back
of the unit with a plastic clamp (to this end, the clamp withstands a 25 kg load; see reference 1 in fig. 4); otherwise, the drain hose
mod.CDE12X
page 31
must absolutely reach the height of the clamp. (minimum 60 cm.)
mod.CDE12X
page 32
n1040286: Shock absorbers with 8.15 mm fixing hole.
mod.CDE12X
page 33
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
From serial number 30127.0001, for appliances produced in the Comunanza factory, the shock absorbers will be fixed to the tank
unit cradle using: the 8 mm diameter screw code 093750 in place of the 10 mm screw code 030446, and related locking nut code
030443 in place of code 030680.
The items affected by this modification are:
Code 093848 - Tank unit cradle 46 lt ;
Code 093878 - Tank unit cradle 40 lt.
Code 093884 - Shock absorber 80 N
Code 093885 - Shock absorber 120 N
The premodified shock absorbers code 086515 and 086372 will continue to be used, whereas cradles code 064518 and 066074
will be used until stocks run out, after which they will be replaced with the new items after widening the shock absorber fixing
holes to a diameter of 11 mm.
n1040289: OKO tube on Slim range models with induction motor.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
From serial number 30212.0001, a shorter OKO pump bowl tube SAT code 094312 is being used on the SLIM range models with
induction motor in order to improve the drain. The new tube replaces SAT code 092174 used on all other models produced in the
Comunanza factory.
The appliances relevant to the modification are:
WS63XIT
WS43XIT
WS642TXEX
WS431TXEX
WS44XT
ABS63XEU
ABS63XEO
ABS53XIT.
The same modification starting from serial number 30414.0001 is suitable even for models SLIM with collect motor and for builtin models.
n1040291: Interchangeability of bowls on LB2000 appliances Comunanza..
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The Comunanza factory has modified the oscillating unit on all the 2000 range models produced in the Comunanza factory:
a) From serial number 21219.0001, the LB 2000 EVO bowl (see fig. 02) is gradually replacing the LB2000 version (see fig. 01),
with the following differences:
mod.CDE12X
page 34
1) Detergent loading tube hole shifted forwards;
2) Elimination of detergent recovery tube hole.
This modification has involved the introduction of the following items:
· Detergent loading tube (washing machine SAT code 092161and combined washer-dryer SAT code 092273);
· OKO pump bowl tube (models code 092174, Snella models with induction motor code 094312);
· Hopper (for rotary slide drawer SAT code 092176, for linear slide drawer code 092314);
b) From serial number 30312.0001, all washing machines produced in the Comunanza factory have been equipped with the new
LB2000 EVO II range bowl (see fig. 03), in place of the LB2000 EVO version (see fig. 02), with the following difference:
1) Porthole with a diameter of 30 cm instead of 28 cm;
This modification has involved the introduction of the following items:
· Tapered porthole seal - rear diameter 30 cm front 28 cm;
Code 093345 - Standard seal;
Code 094091 - Washer-dryer seal;
Code 094093 - Snella seal
· Porthole seal rear fixing ring for 30 cm diameter SAT code 092155;
· Front counterweight (SAT code 092178).
Two LB2000 Evo bowl codings have been created in order to reduce the number of bowls managed by the After-sales Service
(see fig. 04):
1) LB2000 Evo bowl kit coding (Table 01);
2) LB2000 EVO II range bowl kit coding (Table 02);
All bowl codes (with related interchangeability), are indicated in fig. 04 TAB. 03 attached to this Note.
Starting from serial number 30325.0001, for all the versions of Evizzate SNELLA LB2000 washing machines produced in the
Comunanza factory the diameter of tapered porthole must seal return 28 cm. Starting from this serial number all the washing
machines must be supported with door seal and fixing ring in old version.
Starting from serial number 30616.0001, for all the washing machines Evizzate LB2000 produced in Comunanza, the diameter of
tapered porthole must seal return 28 cm. Starting from this serial number all the washing machines must be supported with door
seal and fixing ring in old version.
mod.CDE12X
page 35
mod.CDE12X
page 36
mod.CDE12X
page 37
mod.CDE12X
page 38
mod.CDE12X
page 39
mod.CDE12X
page 40
n1040300: Short heating element for 46 l.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
From serial number 30606.0001, all washing machines with 46 litre tubs, codes 094283, 094273 and 094279, have been equipped
with shorter heating elements, which required the heater retaining bracket hole to be moved back (see fig. 01).
As the tub replacement mainly concerns premodification appliances, it was decided that with those supplied as replacements the
retaining bracket will remain in the old position. Therefore, if the tub needs replacing, it will not be necessary to also replace the
heating element or make the hole and position the retaining bracket.
mod.CDE12X
page 41
When replacing the heating element pay particular attention to the serial number of the appliance and therefore the choice of the
SAT code.
Codes of short heating elements:
Washing machine
Code 087188 - HEATING ELEMENT+ F. PROBE 1700W/230V 169.5IDC
Washer-dryer
Code 066086 - HEATING ELEMENT WITH THERMOFUSE 1700W / 230V+T
Codes of premodification long heating elements:
Washing machine
Code 086661 - IDC HEATING ELEMENT + PROBE1700W 230V L212.5MM;
Washer-dryer
Code 064556 - WASHER-DRYER HEATING ELEMENT WITH THERMOFUSE 1700W / 230V+TE
The new heating elements have been included in the documentation of all models affected by this modification.
If the heating element retaining bracket needs to be shifted, it must be removed and then the new hole must be made in the tub
using a 4.2 mm bit, taking into account that the distance between the two holes must in any case be 43 mm.
To plug the old hole use the s/steel TMT M4 X 12 screw (screw kit code 037132) with vellumoid washer and the self-locking
flanged nut code 037135, bearing in mind that the head of the screw must protrude and that its tightening must not cause the
vellumoid gasket supplied with the screw to break.
n1040325: New shock absorber fixing system with pin
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
From serial no. 40427.0001, shock absorbers have been fixed to the tank unit cradle with two 11 mm pins code C00110163 (see
fig. 01 and 02 enclosed) in place of the 8 mm screws code 093750 and relevant locking nuts code 030443, on all washing
machines and dryers produced in the Comunanza factory.
The items affected by this modification are:
1) The cradles have the same Service code, as they can be used in place of the new ones after widening the shock absorber fixing
holes to a diameter of 10 mm.
Code 093848 - Tank unit cradle 46 lt
Code 093878 - Tank unit cradle 40 lt.
2) The new shock absorbers, with fixing bushing having no s/steel spacer, are not managed as they are interchangeable with the
premodified items (make sure they are CIMA type, as the managed items), fixed with M8 screws code 093750 and related
locking nut code 030443 (see figs. 05 and 06).
Code 093884 - Shock absorber 80 N
Code 093885 - Shock absorber 100 N
To remove the shock absorber from the tank, first extract the pin with a few hammer taps (see fig.03) until it is aligned with the
tank bracket and then pull it out with a pair of pliers (see fig. 04).
(To refit the shock absorber use a new pin. Insert the pin until the toroidal edge is aligned with the bracket.)
mod.CDE12X
page 42
mod.CDE12X
page 43
mod.CDE12X
page 44
n1040349: Zastosowanie zawiasu ze stopu zamak 150° modele Ariston 46.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Od numeru seryjnego 50207.0001 we wszystkich modelach Ariston produkowanych w Teverola (patrz tabela 001 w załączeniu) i
oznaczonych kodem przemysłowym podanym na tabliczce, zaczynającym się od cyfr 46, został zastosowany zawias ze stopu
mod.CDE12X
page 45
zamak, z otwieraniem o kąt 150° kod C00115666 (patrz Rys.001).
Użycie nowego zawiasu pociąga za sobą zastosowanie następujących detali:
Kod C00115670 - Iluminator kompletny EVOII 150° biały 27 z szybą standard;
Kod C00115674 - Iluminator kompletny EVOII 150° biały 27 z szybą długą;
Kod C00115667 - Sprzęt EVOII do zawiasu 150° biały 27;
Detale sprzed zmiany nie są pojedynczo wymienialne na detale po zmianie.
Kod C00110133 - Iluminator kompletny EVOII Standard 180° biały 27 szyba standard;
Kod C00092157 - Iluminator kompletny EVOII 180° biały 27 szyba długa;
Kod C00096193 - Sprzęt EVOII do zawiasu 150° biały 27.
Zawias cod. C00064541 jest nadal używany w modelach do Zabudowy z Comunanza.
n1040371: The T4 mechanism type 4.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
From serial number 30612.0001, the T4 mechanism has been introduced on some oscillating units.
The new tub units are perfectly interchangeable with the premodification ones and therefore maintain the same SAT codes.
The modification especially concerns the basket cross element and the tub cross element assembly that are specific for the new
mechanism.
For servicing the products both the premodification tub cross element assembly (code 074213) and the new assembly (cod.
096077) must be managed; their use is indicated by the serial number of the relevant product.
The relevant Sat codes are:
mod.CDE12X
page 46
TUBS (they maintain same SAT code as the premodification parts).
Models “Evizzati “ Serial number > 30312.0001 and < 30616.0001
SAT code 094279 TUB 46L.B5 CV5 EVO II 1200 rpm;
SAT code 094281 TUB 46 L. B5-CV5 LD EVO II 1200 rpm LD;
SAT code 094287 Tub 40 litres b5-cv5 40 litres 1200-1400 rpm;.
Models Serial number <30312.0001 and > 30616.0001.
Cod. SAT 092257 OUTER TANK & INNER DRUM ASSY B5 CV5
Cod, SAT 092263 OUTER- SET 46 L. CV5-B5 LD;
Cod. SAT 092545 OUTER TANK & INNER DRUM ASSY 40 L B5 CV5
CROSS ELEMENT ASSEMBLY AND SINGLE PARTS MANAGED AS REPLACEMENTS.
SAT code 096077 Cross element assembly with seal rings CV4;
SAT code 096186 Seal ring CV4;
SAT code 013563 Bearing 6205-2Z SKF;
SAT Code 002591 - Bearing 6204-2Z SKF;
On 1200 rpm models, which indicate replacement of the drum with spider in aluminium, with a spider in red ghisa (LVA cod.
C00094280 and LVB cod. C00094282), the following pocedure will need to be followed:
1) Remove the upper counter-weight;
2) Position the balancing springs inside the support holes found further back than the previous position on the cabinet (see
fig.001);
3) Affix the shock absorbers on the support holes positioned on the back part of the cabinet (see fig.002).
mod.CDE12X
page 47
mod.CDE12X
page 48