SLT70 Handset User Guide - Network Telephone Systems

Aristel
SLT70 OPERATION MANUAL
1 GENERAL DESCRIPTION .............................................................................................................. 1
2 TELEPHONE SPECIFICATION....................................................................................................... 2
2.1 SLT70 LAYOUT .................................................................................................................................2
2.2 CHECK LIST .......................................................................................................................................2
2.2 CHECK LIST .......................................................................................................................................3
2.3 INSTALLATION NOTE.........................................................................................................................3
3 FACILITY OPERATION ................................................................................................................... 4
3.1 TELEPHONE BASIC PARAMETER SETTING .........................................................................................4
3.1.1 LCD Brightness Adjustment......................................................................................................4
3.1.2 Ringing Volume Adjustment......................................................................................................4
3.1.3 Local Area Code Setting ...........................................................................................................4
3.1.4 Time Setting ..............................................................................................................................4
3.1.5 Alarm Clock Setting ..................................................................................................................4
3.1.6 Speaker Volume Adjustment......................................................................................................5
3.1.7 Handset Volume Adjustment .....................................................................................................5
3.2 TELEPHONE BASIC FUNCTION OPERATION .......................................................................................5
3.2.1 Incoming Messages ...................................................................................................................5
3.2.2 Outgoing Messages ...................................................................................................................5
3.2.3 Dial-back / Addition-dialing .....................................................................................................5
3.2.4 Transfer/Flash...........................................................................................................................6
3.2.5 Re-dialing..................................................................................................................................6
3.2.6 Pause Function .........................................................................................................................6
3.2.7 VIP Management.......................................................................................................................6
3.2.8 Mute Function ...........................................................................................................................6
3.2.9 One-touch Dialing.....................................................................................................................6
3.2.10 Hands free Function................................................................................................................6
3.2.11 Auto Release Line....................................................................................................................6
3.2.12 IP Card Function(ARS/LCR) .............................................................................................6
3.3 SPECIAL FUNCTION UNDER ARISTEL KTS MODE ...............................................................................7
3.3.1 Ext. Paging (#0) ........................................................................................................................7
3.3.2 Meet Me Page (#*)....................................................................................................................7
3.3.3 Pick Up (*0) ..............................................................................................................................7
3.3.4 Account Code (#7*) ..................................................................................................................7
3.3.5 CO Auto Page ...........................................................................................................................7
3.3.6 System Speed-dialing (#81).......................................................................................................7
3.3.7 Direct Outward Dialing ............................................................................................................7
3.3.8 Direct Trunk Dialing, CO1-CO8 (*41-*48) .............................................................................7
4 TELEPHONE FUNCTION SETTING ............................................................................................... 8
Aristel, the Best in Telecommunications
CONTENT
Aristel
SLT70 OPERATION MANUAL
4.1 COME INTO SETTING STATUS ............................................................................................................8
4.2 EXIT SETTING STATUS ......................................................................................................................8
4.3 DSS KEY SETTING ............................................................................................................................8
4.4 SYSTEM FUNCTION SETTING .............................................................................................................9
4.4.1 ARS/LCR Setting .......................................................................................................................9
4.4.2 Restricted Code Setting.............................................................................................................9
4.4.3 Change Telephone’s Password ...............................................................................................10
4.4.4 System Restoration..................................................................................................................10
4.4.5 CO Hunting Code Setting .......................................................................................................10
4.4.6 Busy Tone Parameter Setting..................................................................................................11
4.4.7 Transfer Key Flash Time Setting.............................................................................................11
4.4.8 Pause Time Setting..................................................................................................................11
4.4.9 Ring off Time Setting...............................................................................................................11
4.4.10 Dialing Delay Time Setting...................................................................................................12
4.4.11 Hook Delay Time Adjustment................................................................................................12
4.4.12 ARS/LCR Start-using or not ..................................................................................................12
4.4.13 Tone/Pulse dialing Switch.....................................................................................................12
Aristel, the Best in Telecommunications
CONTENT
Aristel
SLT70 OPERATION MANUAL
1 General Description
Thanks for choosing our Aristel KTS Special single line telephone SLT70.
The SLT70 is expertly designed for Key Telephone System. It provides all the
functions of a caller ID telephone as well as the following main special features:
z
z
z
z
z
z
z
z
All the existing settings can be saved in case of Power-fail.
Adjustable hook-flash time avoid on-hold problems.
Transfer Key with adjustable flash time to ensure correct transfer operation.
By setting CO Hunting code, this phone provides last number re-dialing no
matter what system it is connected to.
This phone is very suitable as a hotel-telephone for it provides a Message
Waiting indication LED.
This phone provides one-touch functions by programming the 15 DSS keys.
ARS/LCR functions with voice identification. Not used in Australia
In particular, the SLT70 can use the be-paged and Voice Call functions if
connected to an Aristel KTS.
Aristel, the Best in Telecommunications
1
Aristel
SLT70 OPERATION MANUAL
2 Telephone Specification
2.1 SLT70 Layout
1、 Hook Switch
2、 LCD Display
3、 DSS Keys
4、 Message LED
5、 Redial Key
6、 Pause Key
7、 Mute Key
8、 Transfer/Flash Key
9、 Hands free LED
10、 Hands free Key
11、 Micro Phone
12、 Incoming Messages
13、 Outgoing Messages
14、 VIP Phonebook
15、 Hand piece Wall Mount Clip
16、 Speaker
17、 Time Set Key
18、 Alarm Set Key
19、 Numeric key
20、 Telephone Receiver
21、 Handset
22、 Telephone Transmitter
23、 Handset Spring-cord Jack
26、Bracket Spring-cord Jack
24、 Spring Cord
27、Table/ Wall Mount Bracket
25、 Line-cord Jack
28、SLT70 Operation Guide
One-touch Function under General Mode
SLT70 LAYOUT
One-touch Function under Aristel Mode
Aristel, the Best in Telecommunications
2
Aristel
SLT70 OPERATION MANUAL
2.2 Check List
Telephone Base×1
Handset×1
Line Cord×1
Spring Cord×1
Operation Manual×1
Junction box×1(optional part)
2.3 Installation Note
If this phone is used as an extension, please set “Direct Outward dialing” Key.
Aristel, the Best in Telecommunications
3
Aristel
SLT70 OPERATION MANUAL
3 Facility Operation
3.1 Telephone Basic Parameter Setting
Telephone Basic Parameter Setting (off hook)
Description:
1> Off Hook — Press prom Key to enter Setting Status, Press prom Key repeatedly to
change setting menu. (3.1.1-3.1.3)
2> After every setting, Press prom Key to save this setting and switch to another(3.1.1-3.1.3)
3> On Hook / Press SPK Key to exit setting status.
3.1.1 LCD Brightness Adjustment
LCD Displays as “LCD”
Press ▼ or ▲ Key to adjust LCD brightness to the level required. (Total are 5 different
brightness levels.)
Default: 3
3.1.2 Ringing Volume Adjustment
LCD Displays as “rVOL”
Press ▼ or ▲ Key to adjust ringing volume to the level required. (Total are 4 different
volume levels.)
Default: 3
3.1.3 Local Area Code Setting
LCD Displays as “LOCAL”
Press the local area code directly, and then telephone can delete area code on LCD with
every incoming call
3.1.4 Time Setting
Press CLOCK Key to enter setting, 1st digit of time blinks……
Press ▼ or ▲ Key to adjust time, Press CLOCK Key to save and move the cursor.
On hook to exit setting.
This telephone provides the function of FSK Auto time updating, that is, when this phone
is connected directly to telephone Line, the time and date will be updated automatically
while receiving a phone call with CLI enabled.
3.1.5 Alarm Clock Setting
Press ALARM Key to enter setting, Press cfm Key to save and exit setting.
On hook to cancel and exit setting.
LCD Displays as “AC-“
Setting Values: HH MM DD
Aristel, the Best in Telecommunications
4
Aristel
SLT70 OPERATION MANUAL
HH: Hour (00~23)
MM: Minute (00~59)
DD: Ringing Duration (00~90)
Adjust Ringing Duration to “00” to close the clock.
Default: 00 00 00
While off hook, Left-bottom of LCD displays the time, and right-bottom displays the
alarm.
Telephone Basic Parameter Setting (on hook)
Description:
This phone’s Basic Parameter Setting while on hook.
3.1.6 Speaker Volume Adjustment
Press SPK Key to use handsfree on hook, Press ▼ or ▲ Key to adjust Speaker volume
to the level required. (Total are 3 different volume levels.)
Right-above of LCD displays volume degree
Default: 2
3.1.7 Handset Volume Adjustment
Pick up handset Press ▼ or ▲ Key to adjust Handset volume to the fit degree. (Total
are 4 different volume degrees.)
Right-above of LCD displays volume degree
Default: 3
3.2 Telephone Basic Function Operation
3.2.1 Incoming Messages
Press IN Key to display the last incoming number, Use ▼ / ▲ Key to display the
incoming number, date and time.
Press del Key to delete the current record.
3.2.2 Outgoing Messages
Press OUT Key to display the last outgoing number, Use ▼ / ▲ Key to display the
outgoing number, date and time.
Press del Key to delete the current record.
3.2.3 Dial-back / Addition-dialing
While LCD displays incoming, outgoing, or VIP messages, Press REDIAL Key to
dial-back the displayed number.
Press REDIAL Key twice quickly to addition-dial the displaying number. (Telephone will
Aristel, the Best in Telecommunications
5
Aristel
SLT70 OPERATION MANUAL
add a code “0 or 9” before this number automatically before dialing)
3.2.4 Transfer/Flash
Off Hook — Press TRF/FL Key, this is an adjustable hook flash; refer to “Chart 4.4
Function Setting”. If this telephone is used as extension off a telephone system, press
TRF/FL Key and dial request extension number to transfer the call.
3.2.5 Re-dialing
On Hook — Press REDIAL Key to redial the last number.
3.2.6 Pause Function
While dialing, Press PAUSE Key to insert a delay of 990ms (This duration is adjustable,
refer to “Chart 4.4 Function Setting”). During function setting, Press PAUSE Key once
means put in one unit pause time.
3.2.7 VIP Management
The phone number stored in incoming/outgoing messages can be memorized as VIP by
pressing ENTER Key. (LCD displays as”
“)
Press VIP Key to display VIP number, Use ▼ / ▲ Key to inquire the VIP messages.
Press del Key to delete the current record.
3.2.8 Mute Function
Whilst Talking —Press MUTE Key to mute, come back to converse by pressing again.
3.2.9 One-touch Dialing
On hook/off hook — Press DSS Key (DSS1~DSS15)to dial the number programmed in
the DSS key (refer to Chart 4.3 DSS Key Setting).
When DSS key is programmed as a line, the telephone can auto add “CO Hunting Code”
while one-touch dialing.
3.2.10 Hands free Function
Off hook — Press SPK Key once, commence hands free dialing/speaker mode, Press
SPK Key again to end the call.
3.2.11 Auto Release Line
If not hung up properly, the telephone can automatically cut off the line after CO Line
defined Busy-tone-detection time is reached.
3.2.12 IP Card Function(ARS/LCR)
Refer to Chart 4.4.1 ARS/LCR Setting.
Aristel, the Best in Telecommunications
6
Aristel
SLT70 OPERATION MANUAL
3.3 Special Function under Aristel KTS Mode
Special Function under Aristel KTS Mode
Description:
1> Under Aristel KTS mode, you can use almost all the functions that an Aristel Key Phone
can by operating special codes.
2> For the SLT70, we have already set these special codes to appointed DSS key to provide
one-touch functioning under Aristel KTS mode. Of course, customers also can change
DSS key default by setting.
3.3.1 Ext. Paging (#0)
On hook — Press page Key to page Aristel key phone and special SLT.
3.3.2 Meet Me Page (#*)
Hearing paging — Press be page Key to answer paging.
3.3.3 Pick Up (*0)
Press pick up Key directly to pick up a call to a ringing extension.
3.3.4 Account Code (#7*)
Press fac Key directly, dial account code, and then dial required phone no.
3.3.5 CO Auto Page
Talk with a CO Line — Press auto page Key to hold this line with LCD displays as: CO**
(** means CO line no.). At the same time, the telephone begins paging.
3.3.6 System Speed-dialing (#81)
Press spd Key, then dial individual speed-dialing number.
3.3.7 Direct Outward Dialing (0 or 9)
Press dod Key, then telephone can auto hunt a free CO line.
3.3.8 Direct Trunk Dialing, CO1-CO8 (*41-*48)
Press
1
–
8
Key, then telephone will auto hunt for the appointed CO line.
(CO1-CO8)
Aristel, the Best in Telecommunications
7
Aristel
SLT70 OPERATION MANUAL
4 Telephone Function Setting
Telephone Function Setting
Description:
1> Advanced telephone function settings.
2> During function setting, press del key to delete characters; Press ▼ / ▲ key to move the
cursor; Press cfm key to save current settings; Press prom key to cancel the last setting
and exit to main menu.
3> There are two kinds of setting method:
DSS Key Setting: This method is to use prom Key to define DSS-defined-code directly.
System Function Setting: This method is to use prom Key and function code to enable this
telephone’s special functions and parameter defining.
4.1 Enter Setting Status
Off hook — prom Key + password + cfm Key — Enter into Setting Status
Default password: 000000.
LCD Displays:
Ver. No.
10M01D
01-SETEnter Setting Items
4.2 Exit Setting Status
Setting Status — Off hook — Exit Setting Status.
4.3 DSS Key Setting
Setting Status — DSS Key + DSS-defined-code + cfm Key — Press ▼ / ▲ Key to
change DSS Key’s function (Co. / Ext.)
Note: 1. 15 DSS Key means the15 Memory Keys.
2.During setting DSS-defined-code, you may put in:
PAUSE Key: Press PAUSE Key once means put in one unit of pause time
(Refer to Chart 4.4.8). You may press PAUSE Key more than once
according to your requirement, displayed as ”P”.
REDIAL Key: Press REDIAL Key means voice Identification characters. While
finished dialing previous DSS-defined-code, you should dial next
code after Voice Detection, figured by”A”.
TRF/FL Key: Press TRF/FL Key once means put in one unit of flash time (Refer
to Chart 4.4.7), displayed as ”F”.
Aristel, the Best in Telecommunications
8
Aristel
SLT70 OPERATION MANUAL
MUTE Key: Press MUTE Key once means put in one unit of ring off (Refer to
Chart 4.4.9), fdisplayed as ” ”(SPACE).
3. After DSS-defined-code setting, also do set the DSS Key’s function (Co. / Et.).
If set as “CO”, telephone can automatically add a CO Hunting code, then start dialing.
Using: 1.Press DSS Key directly to dial the DSS-defined-code.
E.G.: In Aristel KTS, the Function-code of meet-me-page is “# * ”, After define DSS5
Key as “# * ” and set DSS5 Key’s attribute as Ext., DSS5 can realize one-touch
function of meet-me-page.
2. This definition can be used in conjunction with ARS/LCR setting to achieve more
functions.
4.4 System Function Setting
4.4.1 ARS/LCR Setting
Setting Status — 00+ cfm Key +Initial Code (Max: 8 digits) + cfm Key
st
a. 1 digit
10M01D
101b. (2nd+3rd) digits
Note: 1. a: Means DSS Key no. DSS1~DSS3 can use this function.
Press corresponding DSS Key (DSS1~3) to make choice.
2. b: Means Initial Code group no.
Press ▲/▼ Key to change group no. Each DSS Key provides 30 (00~29)
groups.
3. If the Initial code of dialing number is the same as any one among group
no.00~29, the telephone will automatically add the corresponding
DSS-defined-code (this code can be put in flash, pause, voice ID and so on,
see Chart 4.3), then dialing.
4. DSS1-DSS3’s function should be defined as “CO” to enable ARS/LCR function.
4.4.2 Restricted Code Setting
Setting Status — 00+ cfm Key + DSS4+ Restricted number (Max: 8 digits) + cfm Key
st
a. 1 digit
10M01D
401b. (2nd+3rd) digits
Aristel, the Best in Telecommunications
9
Aristel
SLT70 OPERATION MANUAL
Note: 1. Press DSS4 Key to change a (1st digit) as “4”, and then enter restricted number
setting.
2. a: means Restricted group no.
Press ▼ / ▲ Key to change group no. (00~29).
3. If the Initial code of dialing number is the same as any restricted code among
group no.00~29, the telephone will restrict dialing.
Direct line Mode: group no. 00~19
Extension Mode: (1) CO no. restriction: group no.00~19
(2) Extension no. restriction: group no.20~29
4.4.3 Change Telephone’s Password
Setting Status — 01+ cfm Key + new password + cfm Key
Note: Please remember the password you set. When forgotten, please contact the
nearest Aristel authorized agent for assistance.
4.4.4 System Restoration
Setting Status — 00 + cfm Key + n (Restoration Mode) + cfm Key
Note: “n” means restoration mode (0~9), Default: 2
1-General Mode;
2-Aristel KTS “dial_0 code” Mode;
3-Aristel KTS “dial_9 code” Mode.
4.4.5 CO Hunting Code Setting
Setting Status — 03+ cfm Key + 1st Group CO Hunting Code (Max: 8 digits) + cfm Key
Default Under General Mode: none
Default Under Aristel KTS Mode: 9 or 0
Setting Status — 04+ cfm Key + 2nd Group CO Hunting Code (Max: 8 digits) + cfm Key
Default Under General Mode: none
Default Under Aristel KTS Mode: #4AA
Setting Status — 05+ cfm Key + 3rd Group CO Hunting Code (Max: 8 digits) + cfm Key
Default Under General Mode: none
Default Under Aristel KTS Mode: *4A
Setting Status — 06+ cfm Key + 1st Group CO Delay Time (0~199) + cfm Key
Default: 016
(16*30ms=480ms, unit: 30ms)
Setting Status — 07+ cfm Key + 2nd Group CO Delay Time (0~199) + cfm Key
Default: 016
(16*30ms=480ms, unit: 30ms)
Aristel, the Best in Telecommunications
10
Aristel
SLT70 OPERATION MANUAL
Setting Status — 08+ cfm Key + 3rd Group CO Delay Time (0~199) + cfm Key
Default: 016
(16*30ms=480ms, unit: 30ms)
Note: 1. If the telephone is used as extension of a KTS, you must do the above setting to
enable redialing, ARS/LCR and so on.
2. The telephone can be set two groups of dial_9 code (each group Max. 8 digits)
3. Press REDIAL Key to put in one unit “A”. If the 2nd &3rd Group CO Hunting
Code include “A”, this digit is freewill-number.
4. When Re-dialing, Dial-back (incoming, outgoing or VIP number), it defaults
the1st Group CO Hunting Code.
4.4.6 Busy Tone Parameter Setting
Setting Status — 09+ cfm Key + Busy Tone On-1 Detection Time (0~199) + cfm Key
Default: 023 (23*15ms=345ms, unit: 15ms)
Setting Status — 10+ cfm Key + Busy Tone Off-1 Detection Time (0~199) + cfm Key
Default: 023 (23*15ms=345ms, unit: 15ms)
Setting Status — 11+ cfm Key + Busy Tone On-2 Detection Time (0~199) + cfm Key
Default: 033 (33*15ms=495ms, unit: 15ms)
Setting Status — 12+ cfm Key + Busy Tone Off-2 Detection Time (0~199) + cfm Key
Default: 033 (33*15ms=495ms, unit: 15ms)
Note: The telephone can set two groups of Busy Tone Detection Parameters.
KTSs may have two kinds of Busy Tone, one supplied by the carrier, the other is
internal Busy Tone of the system. Some functions of this telephone can work in
conjunction with Busy Tone Detection Technology.
4.4.7 Transfer Key Flash Time Setting
Setting Status —13+ cfm Key + Flash Time (0~199) + cfm Key
Default: 010 (10*10ms=100ms, unit: 10ms).
4.4.8 Pause Time Setting
Setting Status —14+ cfm Key + Pause Time (0~199) + cfm Key
Default: 033 (33*30ms=990ms, unit: 30ms).
4.4.9 Ring off Time Setting
Setting Status —15+ cfm Key + Ring off Time (0~199) + cfm Key
Default under General Mode: 100 (100*10ms=1000ms, unit: 10ms)
Default under Aristel KTS Mode: 006 (6*10ms=60ms, unit: 10ms)
Aristel, the Best in Telecommunications
11
Aristel
SLT70 OPERATION MANUAL
4.4.10 Dialing Delay Time Setting
Setting Status —16+ cfm Key + CO-dialing Delay Time (0~199) + cfm Key
Note: Some KTSs need a delay time of on-hook signal detection, then start to receive
dialing digits.
Default under General Mode: 016 (16*30ms=480ms, unit: 30ms)
Default under Aristel KTS Mode: 004 (4*30ms=120ms, unit: 30ms)
4.4.11 Hook Delay Time Adjustment
Setting Status — 17+ cfm Key + Hook Delay Time (0~199) + cfm Key
Default under General Mode: 010 (10*30ms=300ms, unit: 30ms)
Default under Aristel KTS Mode: 030 (30*30ms=900ms, unit: 30ms)
4.4.12 ARS/LCR Start-using or not
Setting Status — 18+ cfm Key + “0” or”1” + cfm Key
(0: do not use,
1: use) Default: 0
4.4.13 Tone/Pulse dialing Switch
Setting Status — 13+ cfm Key + “0” or”1” + cfm Key
(0: Tone,
1: Pulse) Default:: 0
Note: If above set as “1” (Pulse), you may press
* Key to change to Tone-dialing mode
while on hook. After going off hook, the telephone will automatically return to
Pulse-dialing mode.
Aristel, the Best in Telecommunications
12