Water Conditioning
Products
DRINKING
WATER SYSTEMS
43
1240 Series Reverse Osmosis Drinking Water Systems
DURO’s advanced reverse osmosis drinking water systems are a natural and economical solution for providing your
family with high quality drinking water. With a space-saving ultra slim profile, the system tucks neatly under your
kitchen sink providing bottled water quality right from your very own tap.
With almost 2/3’s of us not drinking enough water each day, having delicious water conveniently on hand can help
keep you properly hydrated and feeling great. Cut down on sugary beverages and avoid symptoms of mild
dehydration such as headaches, dry skin and daytime fatigue. Use for all your cooking needs. Perfect for coffee,
tea and soups. All systems are backed by a two year limited warranty. The Smartap® water quality monitor found
on the Push Button designated models is backed by a five year limited warranty.
All models feature:
• High quality reverse osmosis membrane
• Choice of 25, 50 and 75 gallons per day
• Sediment pre-filtration
• Pre & Post Carbon block filtration
• 3/8” tubing from RO to tank and faucet for higher flow
• Chrome faucet
•
•
•
•
•
Simple snap fit cover for ease of service
New slim profile with integrated mounting bracket for
easy, space saving installation
Quick connect fittings
Color coded tubing for ease of installation
Storage Tank
Choose a System Just Right for You
DURO is one of North America’s largest suppliers of water treatment equipment. With over 40 years of experience,
DURO has been the leader in reverse osmosis drinking water technology; designing and state of the art systems
for residential and commercial applications. We offer a complete range of drinking water systems to fit your needs
and your budget.
Series III - Premier Push Button Monitored Reverse Osmosis Systems
Our premier model is equipped with our patented Smartap® Push
Button Monitor. At the touch of a button you can be assured that
you are receiving top quality water or you will be alerted that it is
time to change your membrane. This model also utilizes three
dedicated sediment and carbon filters.
This model is tested and certified by
WQA against NSF/ANSI 58 for the
reduction of TDS. Tested and
Certified by WQA against ORD0902
for “lead free” compliance
WQA Tested
and Certified
against CSA
B483.1
Series II - Advanced Four-Stage Reverse Osmosis Systems
This model produces great tasting drinking water utilizing separate dedicated sediment and carbon pre-filters,
allowing for longer run time between cartridge changes.
Series I - Standard Three-Stage Reverse Osmosis Systems
Series I utilizes a combination sediment/carbon pre-filter instead of dedicated sediment and carbon pre-filters. This
system is great for installing in tight spaces or for those looking for the most economical solution.
Series III - Models 4VTFC75G-PB,
4VTFC50G-PB, 4VTFC25G-PB
44
Series II - Models 4VTFC75G, 4VTFC50G,
4VTFC25G
Series I - Model 3VTFC50G
1240 Series Reverse Osmosis Drinking Water Systems
1240 Series Models and System Configurations
Item Number
Model
Vessels
Sediment Filter
Pre-Filter
1240102-20
3VTFC50G
3
None
Dual-Purpose
1240201-20
4VTFC25G
4
String Wound Polypropylene Activated Carbon
1240202-20
4VTFC50G
4
String Wound Polypropylene Activated Carbon
1240203-20
4VTFC75G
4
String Wound Polypropylene Activated Carbon
1240301-20 4VTFC25G-PB
4
String Wound Polypropylene Activated Carbon
1240302-20 4VTFC50G-PB
4
String Wound Polypropylene Activated Carbon
1240303-20 4VTFC75G-PB
4
String Wound Polypropylene Activated Carbon
Membrane
Thin Film Composite
Thin Film Composite
Thin Film Composite
Thin Film Composite
Thin Film Composite
Thin Film Composite
Thin Film Composite
Post-Filter
Output (GPD)*
Activated Carbon
50
Activated Carbon
25
Activated Carbon
50
Activated Carbon
75
Activated Carbon
25
Activated Carbon
50
Activated Carbon
75
Monitor
None
None
None
None
Push Button
Push Button
Push Button
* These models are tested and certified by WQA against NSF/ANSI 58 for the reduction of TDS. Tested and Certified by WQA against ORD0902 for “lead free” compliance. WQA Tested and
Certified against CSA B483.1
† Manufacturer’s output specification only with inlet conditions of 345 kPa (50 psig), 25°C (77°F), going to atmosphere.
Conditions for Use
Source Water Supply Profile
Community / Private
Feed Water Pressure1
Temperature
pH Range
Maximum TDS Level
Turbidity**
Maximum SDI***
Notes:
Chlorinated / Non-Chlorinated
242 - 690 kPa (35-100 psig)
4°- 38°C (40° - 100°F)
3.0 - 11.0
2000 mg/L
<1.0 NTU
<4.0
Chemical Parameters
Max mg/L*
Hardness (CaCO3)
<350 (<20 gpg)
Iron (Fe)
<0.1
Manganese (Mn)
<0.05
Hydrogen Sulfide (H2S)
0.00
Residual Chlorine (Cl2)
<2.0
** Nephelometric Turbidity Unit
* mg/L = ppm
*** Silt Density Index: Value stated in SDI units.
• 1 Pressure Regulator is recommended for feed water pressures exceeding 552 kPa (80 psig).
• The performance of a reverse osmosis membrane is highly dependent upon pressure, temperature and TDS. The actual volume of product water and rejection percentage will vary
with differences from the test conditions that membrane ratings are based upon.
• These drinking water systems are not intended to be used for the treatment of water that is microbiologically unsafe or of unknown quality.
• Storage tank capacity is dependent on pressure. Example: with a 7 psi precharge, the drawdown volume is 2.16 gal at 60 psi, 1.79 gal at 40 psi for the storage tank shown.
• This product is manufactured under one or more of the following U.S. patents: 5,045,197; 5,057,212; 5,221,473
Booster Pump
Raises the water pressure and maintains it at the ideal level for the
system to operate at maximum efficiency. Recommended for use on
supplies with low pressure or high concentrations of total dissolved
solids (TDS). The pump is self-priming and whisper-quiet. It runs on a
24VAC transformer (included) from a standard 120VAC electrical outlet.
System includes: Flexible mounting plate, quick connect fittings and a
pressure shut-off switch.
Item #:
Model:
92325
RO Booster with Pressure Switch and Transformer for 25
to 75 Gallon per day Systems
45
Economy Reverse Osmosis Drinking Water Systems
Economy RO Model Components
Reverse Osmosis Membrane - allows water molecules to pass while dissolved impurities are flushed to the
drain.
Five Micron Pre-Filter - removes tiny particles of suspended dirt and sediment.
Activated Carbon Pre-Filter - protects TFC membrane from chlorine and removes organics.
Activated Carbon Post Filter - removes tastes and odors to give water a final “polish” prior to delivery.
Pressurized Storage Tank - holds purified drinking and cooking water ready for use.
Chrome Plated Faucet - mounts attractively on sink or counter to deliver pure water at the touch of a lever.
Economy RO Booster Pump Model Specific Components
Booster Pump - raises and maintains the water pressure at the optimum level to ensure the highest TDS rejection
rate with maximum production.
Product Water Pressure Switch - shuts off system when pressure tank has been filled.
Feed Water Pressure Switch - protects pump against run dry situations.
All models include:
3/8” outlet tubing for higher flows, thin film composite (TFC) membranes, quick connect fittings for easy
installation and servicing, heavy duty powder coated bracket, stainless steel product water check valve,
automatic shut-off valve, storage tank and under counter installation kit.
The performance of a reverse osmosis membrane is highly dependent upon pressure, temperature and TDS. The actual volume of product water and rejection
percentage will vary with differences from the test conditions that membrane ratings are based upon. These drinking water systems are not intended to be used
for the treatment of water that is microbiologically unsafe or of unknown quality.
Conditions for Use
Source Water Supply Profile
Community/Private
Feed Water Pressure*
Temperature
pH Range
Maximum TDS Level
Turbidity**
Maximum SDI***
Chlorinated/Non-Chlorinated
242 – 690 kPa (35 – 100 psig)
4° – 38°C (40° – 100°F)
3.0 – 11.0
2000 mg/L
<1.0 NTU
<4.0
Chemical Parameters
Max mg/L
Hardness (CaCO3)
Iron (Fe)
Manganese (Mn)
Hydrogen Sulfide (H2S)
Residual Chlorine (Cl2)
<10 gpg / NSF: <350 (< 20 gpg)
<0.1
<0.05
0.00
<2.0
*Pressure regulator is
recommended for feed
water pressures exceeding
552 kpa (80 psig)
**Nephelometric Turbidity
Unit
***Silt Density Index: Value
stated in SDI units.
Economy Reverse Osmosis Systems
Model E50TFC-3SF features:
• Reverse osmosis membrane, nominally rated at 50 U.S. gallons per day.
• Pre-filters: 10" five (5) micron Sediment Cartridge and 10" Activated
Carbon Cartridge
• Post filter: 10" Activated Carbon Cartridge
• Non air gap faucet
• Plastic storage tank
Model E75TFC-3SF features:
• Reverse osmosis membrane, nominally rated at 75 U.S. gallons per day.
• Pre-filters: 10" five (5) micron Sediment Cartridge and 10" Activated
Carbon Cartridge
• Post filter: 10" Activated Carbon Cartridge
• Non air gap faucet
• Plastic storage tank
Specifications
Item
Number
Model
Description
Stages
Sediment
Filter
Pre-Filter
Membrane
Post-Filter
Output
GPD(1)
Rejection
%(2)
Storage Tank
US Gallons(3)
2870
E50TFC-3SF
4
Spun Polypropylene
Activated Carbon
TFC
Activated Carbon
50
up to
3.8
2871
E75TFC-3SF
4
Spun Polypropylene
Activated Carbon
TFC
Activated Carbon
75
99%
3.8
(1)
Nominal product water ratings are based on the following conditions: Supply TDS of 250 ppm softened tap water, 50 psi (0.36 Mpa), 77°F (25°C), pH 8 and 15% recovery with outlet to atmosphere.
(2)
TDS rejection percentages are dependent on the supply conditions and the substance being measured.
(3)
Storage tank capacity is dependent upon pressure. For example, with a 7 psi precharge, the drawdown volume is 2.16 gallons at 60 psi; 1.79 gallons at 40 psi.
46
Economy Reverse Osmosis Drinking Water Systems
Economy Reverse Osmosis Systems c/w Booster Pump
Model EBP75TFC-3SF features:
• Reverse osmosis membrane, nominally rated at 75 U.S. gallons per day.
• Booster Pump: Mounted on RO to maintain constant water pressure.
• Pre-filters: 10" five (5) micron Sediment Cartridge and 10" Activated
Carbon Cartridge
• Post filter: 10" Activated Carbon Cartridge
• Non air gap faucet
• Plastic storage tank
Specifications
Item
Number
Model
Description
Stages
Sediment
Filter
Pre-Filter
Membrane
Post-Filter
Output
GPD(1)
Rejection
%(2)
Storage Tank
US Gallons(3)
2876
EBP75TFC-3SF
4
Spun Polypropylene
Activated Carbon
TFC
Activated Carbon
75
up to 99%
3.8
(1)
Nominal product water ratings are based on the following conditions: Supply TDS of 250 ppm softened tap water, 50 psi (0.36 Mpa), 77°F (25°C), pH 8 and 15% recovery with outlet to atmosphere.
TDS rejection percentages are dependent on the supply conditions and the substance being measured.
(3)
Storage tank capacity is dependent upon pressure. For example, with a 7 psi precharge, the drawdown volume is 2.16 gallons at 60 psi; 1.79 gallons at 40 psi.
(2)
Economy Reverse Osmosis Systems WQA Approved
Model E75TFC-3NSF features:
• WQA Gold Seal tested and certified to NSF/ANSI 58
• Reverse osmosis membrane, nominally rated at 75 U.S. gallons per day
• Pre-filters: 10" five (5) micron Sediment Cartridge and 10" Activated
Carbon Cartridge
• Post filter: 10" Activated Carbon Cartridge
• Non air gap faucet
• Air gap kit
• Plastic storage tank
This model is tested and
certified by WQA against
NSF/ANSI 58 for the
reduction of TDS.
WQA Tested and
Certified against
CSA B483.1
Model E50TFC-3NSF features:
• WQA Gold Seal tested and certified to NSF/ANSI 58
• Reverse osmosis membrane, nominally rated at 50 U.S. gallons per day
• Pre-filters: 10" five (5) micron Sediment Cartridge and 10" Activated
Carbon Cartridge
• Post filter: 10" Activated Carbon Cartridge
• Non air gap faucet
• Air gap kit
• Plastic storage tank
Specifications
The following Economy Reverse Osmosis Systems conform to NSF/ANSI 58 for the specific performance claims as verified and substantiated by test data.
Item
Number
Model
Description
Storage # of
Storage Tank
Tank Vessels Capacity Litres (gal)
2885 E50TFC-3NSF Plastic
2886 E75TFC-3NSF Plastic
(1)
4
4
6 (1.6)
8.7 (2.3)
Vessel
1
Vessel
2
Vessel
3
Vessel
4
Sediment Filter Carbon Filter TFC(1) Membrane Carbon Filter
(1)
Sediment Filter Carbon Filter TFC Membrane Carbon Filter
TFC refers to reverse osmosis membranes constructed from a THIN FILM COMPOSITE
(2)
The daily production rate is the volume of product water produced by the system per day and is
determined by testing in accordance with the procedure outlined in NSF/ANSI Standard 58.
(3)
System’s Efficiency rating as verified by testing in accordance with NSF/ANSI standard 58.
Efficiency rating means the percentage of the influent water to the system that is available to the
user as reverse osmosis treated water under operating conditions that approximate typical daily
usage.
(4)
Daily Production Efficiency Recovery
Rate(2) L/day (G/day) Rating(3) % Rating(4) %
45.4 (12)
8.5
17.5
100 (26.4)
14.5
25.8
System’s Recovery rating as verified by testing in accordance with NSF/ANSI Standard 58.
System’s Recovery rating means the percentage of the influent water to the membrane portion of
the system that is available to the user as reverse osmosis treated water when the system is
operated without a storage tank or when the storage tank is bypassed.
*PRESSURE REGULATOR IS RECOMMENDED FOR FEED WATER PRESSURES EXCEEDING
552 kPa (80 psig)
47
Ultra 2 Under Sink Filter System
• Ideal for home, farm or cottage use on microbiologically
safe water supplies.
• Filters sediment, rust and unpleasant tastes and odors.
• Reduces levels of chlorine and sediment down to 0.5
micron.
• Easy do-it-yourself installation.
• Includes attractive chrome plated faucet.
• Cheaper and more convenient than bottled water.
Ultra 2 Under Sink Filter System
No. 26117
Replacement Cartridges
No. 26118
0.5 Micron Carbon Briquette Cartridge
No. 26006
Superior Taste Cartridge
Chrome Long Reach Faucet
No. 87511
48
Aquatec - Reverse Osmosis Booster Pumps
Aquatec booster pumps are available for reverse osmosis system installations on low pressure water supplies. A
booster pump raises and maintains the water pressure to the optimum level to ensure the highest rejection rate
and maximum production.
Distinguishing Features
• Toughest, most durable pump on the market
• Adjustable maximum outlet psi (regardless of feed
pressure)
• Expels trapped air (no more air locks)
• Can be mounted w/pump head up or down
• More flow at extremely low inlet pressures
• New motor venting system to remove moisture
• EMI/RFI electronic noise suppression
• 100% final performance tested
• 1 year limited warranty against manufacturing
defects
Item # 92287 Aquatec Model CDP 6800 Series Booster Pump Package
• complete with PSW Shutoff Switch and 115V Transformer • suitable for R.O. Systems rated up to 50 GPD
Key Operating Benefits:
• Maximum Pump Pressure - 120 PSI (827 kPa)
• Maximum Inlet Pressure - 40 PSI (275 kPa)
• Used with membranes 9 to 50 GPD
• Up to 30,000+ operating hours (estimated)
• Can run dry without damage
• Self priming - 60” lift
• Low voltage (12-24V) motor for maximum
safety
• Corrosion resistant exterior
• Continuous or intermittent operation
• Supplied with 3/8” PSW Tank Shut-off switch
• Quiet - less than 45 DBA
• Pump inlet/outlet 1/4” QC
• Flexible mounting plate
CDP 6800 Dimensional Specifications
Item # 92317 Aquatec Model CDP 8800 Series Booster Pump Package
• complete with PSW Shutoff Switch and 115V Transformer • suitable for R.O. Systems rated up to 120 GPD.
Item # 92317-1 Aquatec Model CDP 8800 Package with 3/8” x 1/4”
Connectors and Tubing
Key Operating Benefits:
• Maximum Pump Pressure - 120 PSI (827 kPa)
• Maximum Inlet Pressure - 40 PSI (275 kPa)
• Used with membranes 50 to 100 GPD
• Up to 15,000+ operating hours (estimated)
• Can run dry without damage
• Self-printing - 60” lift
• Low voltage (12-24V) motor for maximum
safety
• Corrosion resistant exterior
• Continuous or intermittent operation
• Supplied with 3/8” PSW tank shut-off switch
CDP 8800 Dimensional Specifications
• Quiet - less than 52 DBA
• Pump inlet/outlet 3/8” QC
• Flexible mounting plate
Accessories
Item # 92318:
3/8” PSW Tank Shut-off Switch
Item #92319:
CDP 6800 Transformer
Item #92323:
CDP 8800 Transformer
49
Kemflo - Reverse Osmosis Booster Pumps
Item #92325
The Kemflo Reverse Osmosis Booster Pump
can be used with the 1240 Series Reverse
Osmosis systems from 9 to 75 GPD to provide
increased pressure to the inlet of the system
for increased production and higher quality
water. The pump provides virtually noise free
operation.
1 Year Limited Warranty against
manufacturing defects
Nominal Maximum Flow Rate = 1.0 LPM (0.26 USGPM)
Maximum Pump Pressure = 758 kPa (110 PSI)
Maximum Inlet Pressure = 275 kPa (40 PSI)
Ambient Temperature Limits = 5 to 35°C (40 to 90°F)
Voltage = 24VDC
Pump comes complete with:
• 120VAC to 24VDC Class 2 Transformer, UL Approved for the US and Canada
• Pressure Switch with 3/8" QC Fittings (preset @ 40 PSI)
• Pump inlet / outlet with ¼" QC Fittings
• Vibration Dampening Motor Mount
Aquatec - Reverse Osmosis Demand Pumps
Item # 92341
Aquatec DDP 5800 Series Delivery/Demand
Pump Package
• complete with internal on/off pressure switch
• 115V/60 Hz
• Pressure regulated to approximately 60 psi at
1 GPM
• Pump inlet/outlet 3/8”
Key Operating Benefits:
• 0.25 to 1.5 GPM (5 lpm) flow
• Adjustable switch and bypass settings
• 7 year design life (estimated)
• Minimal pulsations
• Self priming
• Chemically resistant versions
• Up to 130 psi (9 bars) pressure
• Auto purging
• Highly efficient
• Whisper quiet at lower flows
• Can run dry without damage
1 Year Limited Warranty against manufacturing defects
50
Item #92342
3/8” HP1000 Kemflo
Pressure Switch
Item #92344
Kemflo Transformer
Leak Controller
The first line of defense against water damage.
Leak Controller detects the water spill on the surface and engages a shut-off valve
to cut-off the water supply. It also sounds an alarm to alert the customer until the
valve is manually reset. By preventing the continuous water flow, equipment and
property damage are restricted and the user liability is reduced.
It can be connected to the water purification system, POU coolers, refrigerators,
ice makers etc.
Features
• Available valve to tubing connection sizes: 1/4” for plastic and copper tubing
• LeakLogic™ RISC based management - state of the art microchip technology for
sensitive controls, operation verification and long battery life
• Status test button
• Audio and LED status indicator
• Audio alarm
• Powered by 4 “AA” batteries - no external electrical connections required
• Pull-out battery holder for convenient battery replacement
Item #92434
• Programmable service reminder
• NSF approved automatic ball valve shut-off and plastic tubing
• Two screw mounting plate allows for quick and simple installation
• Sensor towel
• Built with superior impact resistant ABS plastic
• One sensor included with coin test slot and series connectors
• Built with reinforced nylon and glass materials on stressed components
• Water detection sensitivity down to 2 ppm TDS (Total Dissolved Solids)
• Programmable service reminder indicator
• Conformal coating on the printed circuit board
• One Year Limited Warranty from date of purchase against defects in material and workmanship
Specifications
Power
Sensor
Temperature
Size (H x W x D)
Weight
Solenoid
Alarm
LED
Mounting
Battery Replacement
4 “AA” size alkaline type batteries
Electromechanical dual probe with series connectors
System operating range: 40° to 100°F (4° to 37°C)
Water operating range: 36° to 140°F (2° to 60°C)
6.75 x 3.25 x 2.5” (171 x 83 x 64 mm)
0.9 lbs (0.4 kg) with batteries
6V DC Push-Type
85+dB at 5’ @ 3.4 ± 0.5 kHz pulsing alarm
Blue
Accessories and bracket supplied for wall mounting
Replace annually or upon low battery indicator
- This product does not guarantee the prevention of water damage.
- Many factors increase the probability of preventing water damage including: Constant Leak Controller testing / Physical
verification of all parts / Correct placement of the sensor(s)
Manufactured by Water Controller Products
Livermore, California
51
Designer Faucets
The Tomlinson Designer RO Faucet
comes in 9 beautiful finishes to match
today's designer kitchens. This lead-free
designer faucet retrofits to most brands
and is an excellent upgrade from basic
faucets that come with most RO and
other Filter Systems.
Features
• Combines quality and style with up-sell appeal
• Retrofits most brands
• Smooth operating ceramic disk element
• Lever style handle
• Standard finish is highly polished chrome; nine
other designer finishes available
• High reach neck design of 12" (305 mm); optional
shorter neck also available
• Neck swivels easily, 360°
• Unique protective spout tip prevents after drip
• Modular air gap (patent pending)
• Base diameter is 2-1/4" (57 mm)
• Preinstalled tubing for quick connections
• Mounting hardware included
• NSF listed to ANSI NSF Std. 61-1999a
• Two-year warranty
Specifications
Item
Number
Model
Description
87540
Designer Air Gap RO Faucet, Polished Chrome
87541
Designer Air Gap RO Faucet, Satin Nickel
87542
Designer Air Gap RO Faucet, White
87543
Designer Air Gap RO Faucet, Biscuit
87544
Designer Air Gap RO Faucet, Black
87545
Designer Air Gap RO Faucet, Polished Brass
87546
Designer Air Gap RO Faucet, Antique Bronze
87547
Designer Air Gap RO Faucet, Bright Nickel
87548
Designer Air Gap RO Faucet, Brushed Stainless Finish
Spout Reach: 5" (127 mm)
Overall Height: 12" (305 mm)
Pressure Rating: 125 PSI / 8.3 BAR
Flow Rate at 35 PSI / 2.32 BAR: 1.0 gpm (3.785 lpm)
Temperature Rating: 40°F / 4°C to 150°F / 66°C
Mounting Hole Diameter: Without air gap: 1/2"
With air gap: 7/8"
Max. Mounting Surface Thickness: Without air gap: 2-3/8"
With air gap: 1"
The Designer RO Faucet is NSF listed to ANSI
Std. 61-1999A.
52
The Tomlinson Contemporary RO Faucet
comes in four fabulous finishes which
add high style to the high-end kitchen.
Features
• Elegant design complements today’s
high-end kitchens
• Retrofits most brands
• Lever style handle
• Protective spout tip design prevents after-drip
• Patented modular air gap (US patent #7,011,106)
• Internal ceramic disc provides smooth operation
• High reach neck of 12” (305 mm); swivels easily,
360°
• Pre-installed tubing allows for quick connections
• All mounting hardware is included
• NSF listed to ANSI NSF Std. 61
• Two-year warranty
Specifications
Item
Number
Model
Description
87551
Designer Air Gap RO Faucet, Polished Chrome
87552
Designer Air Gap RO Faucet, Satin Nickel
87553
Designer Air Gap RO Faucet, Antique Bronze
87554
Designer Air Gap RO Faucet, Brushed Stainless Finish
Spout Reach: 5" (127 mm)
Overall Height: 12" (305 mm)
Pressure Rating: 125 PSI / 8.3 BAR
Flow Rate at 35 PSI / 2.32 BAR: 1.0 gpm (3.785 lpm)
Temperature Rating: 40°F / 4°C to 150°F / 66°C
Mounting Hole Diameter: Without air gap:1/2" min, 1-1/8" max
With air gap 7/8" min; 1-1/8" max
Max. Mounting Surface Thickness: Without air gap: 2-3/8"
With air gap: 1"
The Designer RO Faucet is NSF
listed to ANSI Std. 61.
Options
Designer RO Display Kit
#87550
• Displays your choice of 4
Designer RO Faucets in
under 12" of space.
• Attractive marble-like base
highlights faucet finishes.
• Easy to assemble.
• Completely portable.
Designer RO Faucets sold
separately
Value Faucets
The Value Faucets are the best alternative to upgrade the existing basic faucets in your home. The Value Faucets
are a unique quarter turn faucet that comes in two designs and six different finishes. These faucets are NSF
approved and are lead-free.
Features:
• Elegant design complements today’s high-end kitchens
• NSF listed to ANSI NSF Std. 61 and is lead free
• Retrofits most brands
• Internal ceramic disc provides smooth operation
• High Neck Design which swivels 360°
• Lever style quarter turn handle
• All mounting hardware is included
• Available in two designs, six different finishes
• Two-year warranty
Series 888 Specifications
• Overall Height of 11.5" (292 mm)
• Swivels Easily, 360°
• Spout Reach: 5.7" (146 mm)
• Mounting Hole Diameter: ½" (12.5 mm)
• Base Diameter: 1.73" (44 mm)
• Connection*: ¼" compression nut fitting
• Operating pressure: 125 psi/8.3 bar
• Flow Rate: 1.0 gpm/3.785 lpm at 35 PSI/2.32 BAR
• Temperature Rating: 4°C/40°F to 70°C/158°F
Item #
Description
Series 888
Item #
These faucets are NSF 61
approved and are lead-free.
Series 905 Specifications
• Overall Height of 11.075" (281.32 mm)
• Swivels Easily, 360°
• Spout Reach: 4.75" (120 mm)
• Mounting Hole Diameter: ½" (12.5 mm)
• Base Diameter: 1.76 (44.8 mm)
• Connection*: ¼" compression nut fitting
• Operating pressure: 125 psi/8.3 bar
• Flow Rate: 1.0 gpm/3.785 lpm at 35 PSI/2.32 BAR
• Temperature Rating: 4°C/40°F to 70°C/158°F
Description
Series 905
87580
Faucet, Polished Chrome
87582
Faucet, Polished Chrome
87581
Faucet, Brushed Nickel
87583
Faucet, Brushed Nickel
87584
Faucet, Black
87586
Faucet, Satin Nickel
87585
Faucet, Satin Nickel
87587
Faucet, Oil Rubbed Bronze
87588
Faucet, Antique Brass
87589
Faucet, Antique Wine
* The standard faucets come with 1/4" compression nut fitting. The 3/8" quick connect faucet adapter fitting (#92407) can be purchased separately.
53
PURA® Point-of-Use Coolers
The PURA COOL is an economical
bottle-free cooler product.The
treatment system is mounted
remotely and the cooler provides hot
and cold filtered drinking water in a
basic yet sturdy platform.
Features
• Hot and Cold dispensing spigots
• Hot water safety lock to prevent
accidental dispensing
• Dual float shut-off for safety
• Both remotely mounted filtration or
reverse osmosis options
• Meets UL and CSA requirements
The PURA MAX bottle-free cooler
is a product with a modern look and
feel suitable for business and
homes, but without the added
ultraviolet option of the Max Plus
model.
Features
• Modern look with metallic finish
matches any décor particularly in
office environments
• 1 gallon stainless steel cold tank
• Hot and Cold dispensing spigots
• Hot water safety lock to prevent
accidental dispensing
• Lower cabinet is large enough to
mount either a filtration cartridge
package or a reverse osmosis
system
• Meets UL and CSA requirements
The PURA MAX PLUS includes a
system which re-circulates water
from the cold reservoir past an
ultraviolet sterilization lamp for
continual sanitization. This Max Plus
has a modern look and feel that is
suitable for both business and home
environments.
Features
• Modern look with metallic finish
matches any décor particularly in
office environments
• Re-circulating ultraviolet sanitization
provides peace of mind
• 1 gallon stainless steel cold tank
• Hot and Cold dispensing spigots
• Hot water safety lock to prevent
accidental dispensing
• Lower cabinet is large enough to mount either a
filtration cartridge package or a reverse osmosis
system
• Meets UL and CSA requirements
With advanced features such as
“in tank” UV Santization and
BioCote® to inhibit biological
growth, the PURA ULTIMATE
provides an endless supply of
water with safety and security.
The Ultimate modern and yet
robust appeal and function is
perfect for installation in all
applications.
Features
• Three water temperature
settings meets everyone’s
needs
• In tank ultraviolet sanitization
lamp maintains water quality in
the cold tank
• Lower cabinet mounts either filtration or reverse
osmosis equipment
• BioCote® Technology protects from bacterial
growth on exterior
• Leak detection and automatic shut-off prevent
water damage
• Large 1 gallon cold tank
• 9” high filling height for pitchers
• Adjustable levelling feet
54
PURA® Point-of-Use Coolers
PURA Point-of-Use Coolers produce
bottle quality water.
• UV Light - Without harmful chemicals, ultraviolet light
sanitizes water to protect you from bacteria.
• BioCote® - A new technology offering antimicrobial
protection against the fungi, mold, and bacteria to
reduce unpleasant odors.
• Activated Carbon Filtering - reduces chlorine taste and odor.
• Sediment Filtering - reduces turbidity and sediments.
• Reverse Osmosis - WaterGroup’s 1240 Series reverse osmosis
technology reduces total dissolved solids in the water.
Specifications
Model
PURA Cool
PURA Max
PURA Max Plus
PURA Ultimate
Model
PURA Cool
PURA Max
PURA Max Plus
PURA Ultimate
Cold Tank Capacity
usgal (L)
1.2 (4.5)
0.9 (3.5)
0.9 (3.5)
1.2 (4.5)
Removable
Drip Tray
✔
✔
✔
✔
Hot Tank Capacity
usgal (L)
0.9 (3.5)
0.4 (1.5)
0.4 (1.5)
0.4 (1.5)
Cold
Water
✔
✔
✔
✔
Hot
Water
✔
✔
✔
✔
Electrical
120V/60Hz/6.2A
120V/60Hz/4.7A
120V/60Hz/4.7A
120V/60Hz/6.2A
Room Temp.
Water
—
—
—
✔
Dimensions
H x W x D inches (mm)
39x12x12 (980x312x314)
42x13x15 (1060x330x380)
42x13x15 (1060x330x380)
46x16x15 (1160x410x380)
Reserve Storage
Tank usgal (L)
—
—
—
3 (11)
Leak
Detection
—
✔
✔
✔
Water
Connection
1/4” tube
1/4” tube
1/4” tube
1/4” tube
UV
Protection
—
—
✔
✔
BioCote
—
—
—
✔
Dispensing Area
Height inches (mm)
7.75 (197)
7.5 (190)
7.5 (190)
9.0 (228)
NSF
61
—
—
—
✔
Filtration
Remote
✔
✔
✔
Reverse
Osmosis
Remote
✔
✔
✔
Electrical: 120V/60Hz Grounded North American electrical outlet
Inlet Water Pressure: 40 - 60 psi (275-414 kPa) Recommended / 100 psi (862 kPa) Maximum
Inlet Water Temperature: 40 - 100°F (4 - 38°C)
Drain Connection: Required for coolers equipped with reverse osmosis
Source Water Supply Profile
Filtration
Equipped Coolers
Reverse Osmosis
Equipped Coolers
Municipal/
Private
both
Chlorinated/
Non-Chlorinated
both
pH
Range
3.0-11.0
both
both
3.0-11.0
Maximum
TDS
<500 mg/L
recommended
<500 mg/L
recommended
Turbidity
<1.0 NTU
Maximum
SDI
—
<1.0 NTU
<4.0
Hardness
<350 mg/L
(<20gpg)
<350 mg/L
(<20gpg)
Iron
(Fe)
<0.1 mg/L
Manganese
(Mn)
<0.05 mg/L
Hydrogen
Sulphide (H2S)
<0.0 mg/L
Residual
Chlorine (Cl)
<0.0 mg/L
<0.1 mg/L
<0.05 mg/L
<2.0 mg/L
<2.0 mg/L
55
Remote Water Chiller
Stylish and unique water chiller that fits discretely under the kitchen
sink...ready to plug in!
• Provides perfectly chilled drinking water at 39 - 42°F (4 - 6°C)
• All stainless steel waterways to use with RO system
• White powder coated galvanized steel cabinet with light gray plastic
fascia
• Easy to install with quick-connect fittings
• Four foot insulated power cord with NEMA 5-15 plug-ready to plug in
• Adjustable water temperature control
• One gallon per hour cooling capacity; stainless steel storage tank
• Air cooled; no cabinet venting required
• Includes four feet of 1/4” diameter tubing, two quick-connect fittings,
wall mounting clips and screws, instruction manual
• NSF approved
Cabinet: Powder coated galvanized steel cabinet with plastic front.
Cold Water Refrigeration Unit: Convection-cooled condenser. Internally spring mounted, hermetically sealed
compressor with automatic overload protector. No lubrication needed. Refrigerant is controlled accurately by
capillary tube. Air-cooled; designed to fit under a cabinet.
Cold Water Thermostat: Temperature is controlled by an adjustable thermostat with “OFF” position that is easily
accessible on the front of the cabinet.
Cold Water Reservoir: Evaporator is made of copper tube on stainless steel water tank and both are encapsulated
in insulation.
Capacity: 1 GPH cooling capacity.
Electrical: 115 volts, 60 Hz. Water cooler compressor hp 1/20. Insulated power cord with NEMA 5-15 polarized
plug.
Limited One Year Warranty: One year on the sealed refrigeration system and most component parts. Detailed
warranty certificate enclosed with each water cooler; sample copy available upon request.
Specifications
Item
Number
Model
Description
Cooling
Capacity1
GPH (LPH)
2878
R1P
1.0 (3.8)
115 volts, 60Hz
Full Load
Rated
Amps
Watts
1.3
135
Dimensions
WxDxH
Inches
Net
Weight
Lbs.
10-5/16 x 8-3/4 x 14-5/8
30
(1)
Capacity is at industry standard rating conditions of 50°F (10°C) outlet water, 80°F (26.7°C) inlet water and 90°F (32.2°C) ambient air.
• Model covered by this specification complies with all known Plumbing Codes. Listed by Underwriters Laboratories Inc.
• Components in this cooler are lead free as defined by the safe Drinking Water Act Amendments of 1986, and the Lead Contamination Control Act of 1988.
• Drinking water cooler is Certified to NSF/ANSI 61.
• All specifications subject to change without notice.
Certified to
NSF / ANSI 61 / Section 9
Manufactured by Tri Palm International, LLC
Cienega De Flores, Mexico
56