DATA SHEET
6x3 All-In-One Presentation Switchers (MultiFormat, HDMI Inputs)
DVX-2150HD-SP (FG1905-11) 2x25W 8-Ohm
DVX-2150HD-T (FG1905-13) 75W 70/100V
Overview
The Enova® DVX-2150HD 6x3 All-In-One Presentation Switcher is a single, unified
audio, video, and control device that replaces the need for numerous individual
components and eliminates the integration and reliability challenges that
accompany them. The compact 3U Presentation Switcher integrates a variety of
different functionality, such as a scaler, analog to digital signal converter, twisted
pair transmitter and amplifier with built-in professional grade audio processing into
a single box. With AMX-exclusive features, the DVX-2150HD is a simple to install,
flexible solution, perfectly suited for smaller conference rooms and classrooms.
The DVX-2150HD includes a long list of features to ensure optimal audio and video
quality from virtually any source. The state-of-the-art professional grade audio DSP
delivers quality audio throughout a room. The DVX-2150HD's multi-format video
inputs support analog and digital signals including HDMI with HDCP sources - all in
the same connector. Built-in SmartScale® Technology outputs video that is perfectly
scaled for each connected display, eliminating the integration challenges that can
occur when sources and displays have different optimal resolutions - making the
DVX-2150HD easy to specify, easy to install and easy to use.
© 2014 AMX. All rights reserved.
The Enova DVX's all-in-one architecture also delivers the lowest Total Cost of
Ownership in the industry, thanks to ease of support, maintenance and
configuration, as well as reduced hardware and cabling costs.
Common Applications
 The DVX-2150HD is ideal for dramatically simplifying AV control and distribution in small to medium-sized
and large conference rooms, boardrooms and classrooms.

The flexible DVX-2150HD is perfect for any complex collaboration space with a mix of analog and digital
sources, multiple displays, or rooms that require support for video conferencing.

The DVX-2150HD is perfect for any room or facility with space constraints, especially those that lack space in
equipment racks.
Features
 All-In-One Device – Controller, matrix switcher, scaler, analog to digital converter, amplifier, plus twisted pair
distribution and professional-grade audio DSP – all in a space-saving 3U chassis
 Simplicity & Reliability – Replaces the need for numerous individual components and equipment, ensuring
high reliability and saving on configuring and programming costs
 Low Total Cost of Ownership – With a consistent platform across a variety of sizes, it is easy to standardize
on the the DVX and reduce costs for hardware, training, support, troubleshooting and sparing
 Optimal Video Image Quality Every Time – Exclusive SmartScale™ Technology automatically scales the image
to the best resolution and video parameters for each display—even for displays of different information—
without manual setup, eliminating the need for costly external scalers
 Crystal Clear Audio – Includes an integrated digital signal processor with advanced capabilities like
independent 10-band parametric EQ, independent input gain adjustments and variable compression, allow
precision tuning to match unique source and room attributes
 Audio Breakaway – Stereo audio from any analog input or de-embedded from any HDMI input can be
broken away from its associated video, processed through the DSP, and switched independently to any
analog, HDMI or S/PDIF audio output
 Audio Matrix Switching – Four independently switched and processed audio paths provide four unique
volume, EQ, ducking and mixing configurations for perfectly tuned room audio as well as integration with
audio/video conferencing, induction loop systems, voice re-enforcement speakers and audio recording
devices
 Enhanced Microphone Processing – Independent 3-band parametric EQ, compression, gating, auto-ducking,
and limiting on each microphone input ensures crystal clear communication
 Matrix Switching – Freely route any input to any or all outputs without blocking - 4x2 video switcher and 6x3
audio switcher with audio breakaway
 AV and Control Over Twisted Pair – Send audio, video, bi-directional control and Ethernet up to 100m over
one standard twisted pair cable
 HDMI/HDCP Switching with Simplicity of Analog – End-to-end distribution of HDMI/HDCP without
interruption or key constraints using exclusive InstaGate Pro® Technology
 Multi-Format Ports – Built for analog signals - RGBHV, Component, S-Video, and Composite, and digital
HDMI/HDCP and DVI signals - all on the same connector
 3D Support – Pass through latest video formats including 3D and Deep Color
 DXLink™ Twisted Pair Outputs – Send audio, video, bi-directional control, Ethernet and power to DXLink
HDMI Receivers up to 100m away over one twisted pair cable - for more details and helpful cabling
information, reference the white paper titled Cabling for Success with DXLink, or contact your AMX
representative
 Saves Energy – Includes features that dramatically reduce energy utilization. Use the interactive DVX Energy
Savings Calculator to estimate savings for your particular configuration
Specifications
GENERAL
Enclosure
Dimensions (HWD)
Metal with black matte finish
5 3/16" x 17" x 14" (13.2 cm x 43.2 cm x 35.6 cm)
2
Weight
Certifications
Included Accessories
Optional Accessories
18.3 lb. (8.31 Kg)
FCC Part 15 Class A
CE EN 55022
CE EN 55024
CE EN 60065
IEC 60065
IC CISPR 22 Class A
C-Tick CISPR 22 Class A
LVD EN 60950-1
UL 60065
RoHS / WEEE Compliant
•1 CC-NIRC, IR Emitter w/3.5mm Phoenix (FG10-00011)
•1 CC-DVIM-VGAF, DVI to VGA Adapter (FG10-217013)
•(2) Front Rack Mounting Brackets (62-1905-16 and
62-1905-17)
•Enova DVX-2150HD All-In-One Presentation Switcher
Installation Guide
•CC-DVI-5BNCM, DVI to 5 BNC Male Cable (FG102170-08)
•CC-DVI-RCA3M, DVI to 3 RCA Male Cable (FG102170-09)
•CC-DVIM-VGAF, DVI to HD-15 Female Adapter (FG102170-13)
•CC-DVI-SVID, DVI to S-Video Cable (FG10-2170-10)
•CC-3.5ST5-RCA2F, 5-pin 3.5mm Phoenix to 2 RCA
Female Cable (FG10-003-20)
•DX-RX, DXLink HDMI Receiver Module (FG1010-500)
•EXB-IRS4, ICSLan IR/S Interface, 4 IR/S and 4 Inputs
(FG2100-23)
•EXB-COM2, ICSLan Serial Interface, 2 Ports (FG210022)
•EXB-REL8, ICSLan Relay Interface, 8 Channels
(FG2100-20)
•EXB-I/O8, ICSLan Input/Output Interface, 8 Channels
(FG2100-21)
•EXB-MP1, ICSLan Multi-Port, 1 COM, 1 IR/S, 2 I/O, 1
IR RX (FG2100-26)
•CBL-HDMI-FL HDMI, High Speed Flat Cable with
RedMere® Technology (FG10-2180-16)
•CBL-DP-FL, DisplayPort High Speed Flat Cable with
RedMere Technology (FG10-2181-16)
•CBL-ETH-FL, Ethernet Cat5e Flat Cable (FG10-218216)
•CBL-RGB+A-FL RGB with Audio Flat Cable (FG102183-16)
ACTIVE POWER REQUIREMENTS
Power Consumption
Power Connector
Voltage AC (Typical)
Power Factor Correction (PFC)
80 Watts typical without amplifier
85 to 90 Watts typical average with amplifier
30 Watts typical in low-power mode
IEC Power Cord Connector
100-240 VAC
47-63 Hz
110-240V, 47/63 Hz AC supply
Supported, complies with N60555-2 and EN61000-3-2
3
ENVIRONMENTAL
Temperature (Operating)
Temperature (Storage)
Humidity (Operating)
Heat Dissipation (Typical)
Heat Dissipation (Standby)
0° C to 40° C (32° F to 104° F)
-10° C to 70° C (14° F to 158° F)
5% to 85% RH
300 BTU/hr
100 BTU/hr
ETHERNET
Connection
Description
Link/Act Indicator
Speed Indicator
(1) RJ-45
10/100 Port RJ-45 connector provides TCP/IP
communication. This is an Auto MDI/MDI-X enabled
port, which allows you to use either straight-through
or crossover Ethernet cables. The Ethernet Port LEDs
show communication activity, connection status,
speeds, and mode information
Link/Activity LED (green) blinks when receiving
Ethernet data packets, one on Ethernet RJ-45
connector and one on the front panel
Speed LED (yellow) lights On when the connection
speed is 100 Mbps Ethernet connection and turns OFF
when the speed is 10 Mbps
INTEGRATED AMPLIFIER
Integrated Amplifier
DVX-2150HD-SP: 2 x 25 W RMS into 8 Ohms Class D
stereo amplifier (4-ohm stable)
DVX-2150HD-T: 75 W, 70 V / 100 V mono amplifier
ONBOARD MASTER
Controller
Memory
Program Port
Configuration Dip Switch
ID Pushbutton
Status Indicator
Input Indicator
Output Indicator
Integrated Controller is the equivalent of a NetLink NI2100 Central Controller
256 MB SDRAM
1 MB Non-volatile (NV) SRAM
256 MB FLASH
(1) DB-9 connector that supports RS-232
communications to a PC for system configuration and
diagnostics
8-position Master configuration DIP switch allows
setting the Serial Programming port baud rate and
onboard Master execution mode (PRD or normal)
Black ID pushbutton sets the NetLinx Device ID
assignments of the Internal Control Device. It has no
effect on the Internal Switcher Device
Status LED (green) blinks to indicate that the system is
programmed and communicating properly
Input LED (yellow) blinks to indicate that the Controller
is receiving data
Output LED (red) blinks to indicate that the Controller
is transmitting data
CONTROL PORTS & INDICATORS
AxLink Port
AxLink Indicator
(1) AxLink Port: 1 3.5 mm captive-wire connector
provides data and power to external control devices
(1) AxLink LED (green) indicates the state of the AxLink
port
4
I/O Channels
I/O Indicator
IR/Serial
IR/Serial Indicators
Relays
Relay Indicators
RS-232/422/485 Ports
RS-232/422/485 Indicators
(1) 6-Pin 3.5 mm (female) captive-wire connector
4-channel binary I/O port for contact closure with each
input being capable of voltage sensing
NetLinx Port 9
Channels 1-4
(4) LEDs (yellow) indicate that one or more of the I/O
channels (1-4) are active
(4) 8-pin 3.5 mm (female) captive-wire connector
4 IR Transmit / 1-way Serial ports
NetLinx Ports 5-8
Supports high-frequency carriers up to 1.142 MHz
4 IR/Serial data signals can be generated
simultaneously
(4) LEDs (red) indicate that one or more of the IR/Serial
ports (1-4) are transmitting control data
(4) single-pole, single-throw relays
(1) 8-pin 3.5 mm (female) captive-wire connector
NetLinx Port 4
Channels 1-4
Each relay can switch up to 24 VDC or 28 VAC @ 1 A
Each relay is independently controlled
(4) LEDs (red) indicate that one or more of the relay
channels (1-4) are active (closed)
(3) bi-directional RS-232/422/485 serial ports
(3) DB-9 Male Connectors
NetLinx Ports 1-3
XON/XOFF (transmit on / transmit off)
CTS/RTS (clear to send/ready to send)
300 - 115,200 baud
(3) sets of LEDs (red/yellow) indicate that RS232/422/485 Ports (1-3) are transmitting or receiving
data
INTEGRATED MATRIX SWITCHER CONTROL
Switch Pushbutton
Take Pushbutton
LCD Display
Video Menu Pushbutton
Audio Menu Pushbutton
Navigation Pushbuttons
Status Pushbutton
Exit Pushbutton
Video Mute Pushbutton
Press to enter the SWITCH menu on the LCD display.
Choose to switch audio, video or both from any input
to any output. Press the TAKE pushbutton to
implement the switch
While in the SWITCH menu, press to implement an
audio/video switch. When not in the SWITCH menu,
press to cycle through audio and/or video inputs
Liquid crystal display (2 lines with 20 characters per
line) indicates current volume level and displays the
Video, Audio, and Tools menus
Press to access the Video menu on the LCD display.
Multiple presses cycle through the various VIDEO
menus
Press to access the Audio menu on the LCD display.
Multiple presses cycle through the various AUDIO
menus
(4) directional buttons for navigating the options in the
Video and Audio menu (on the LCD display)
Press to access the STATUS menu on the LCD display
Press to exit any menu
Press to mute/un-mute (enable/disable) all video
output displays. Video Mute results in a blank screen
on the output display
5
Audio Mute Pushbutton
Press to mute/un-mute all audio outputs
INTEGRATED MATRIX SWITCHER
Video Switching
Video Inputs
Video Outputs
Video Resolution Support
Progressive Resolution Support
HDCP Support
EDID Management
Audio Switching
Audio Inputs
Audio Outputs
6 x 3 Matrix Video Switching, any of the 6 inputs can
be routed to any or all of the 3 video outputs
(2) Multi-Format DVI-I; supports HDMI/HDCP, DVI,
RGB, S-Video, Composite, Component (Y/Pb/Pr)
(4) HDMI; supports HDMI/HDCP
(2) HDMI; supports HDMI/HDCP
(1) DXLink; supports digital video, audio, Ethernet, bidirectional control and power
Supports resolutions up to 1920 x 1200 @ 60Hz. See
Operations Reference Guide for details for each signal
type
480p up to 1920x1200 @ 60 Hz
If input is interlaced, all scaled outputs will deinterlace
video to a progressive resolution format. If in scaler
Bypass mode interlaced input will pass through
unaltered
Yes, full matrix HDCP support (includes any input to
any or all outputs)
Key Management System
AMX HDCP InstaGate Pro Technology
Key support up to 16 sinks per output, independent of
source device
A preferred EDID can be selected for each input or any
display EDID can be mirrored to any input
independently
8 x 3 Matrix Audio Switching. Each of the 3 audio
outputs has independent volume, EQ, ducking, sync
delay and mixing. Any of the 3 audio paths can be
routed to any analog, HDMI or S/PDIF output
(2) female 1/8” stereo mini-phono jacks; support
unbalanced audio
(2) 3.5 mm 5-position captive-wire terminals; support
balanced (differential) or unbalanced (single-ended)
stereo audio
(2) 3.5 mm 3-pin captive-wire MIC connectors;
supports up to two mono microphones, unbalanced or
balanced audio
(4) HDMI connections support digital audio
DVX-2150HD-SP (FG1905-11):
(1) Amplified audio output; 4-position captive wire
connector; supports amplified, variable, mono or
stereo audio
(2) Line level audio output; supports balanced or
unbalanced mono or stereo
(1) S/PDIF output; mirrors any of the 3 analog audio
outputs, 2 HDMI outputs or DXLink output
(2) HDMI connections support digital versions of
analog audio or direct pass-through audio
(1) DXLink support digital version of analog audio or
direct pass-through
DVX-2150HD-T (FG1905-13):
(1) Amplified audio output; 2-position captive wire
connectors; supports 70 V or 100 V mono audio –
connect a speaker to either but not both
simultaneously
6
Audio Breakaway
(2) Line level audio output; supports balanced or
unbalanced mono or stereo
(1) S/PDIF output; mirrors any of the 3 analog audio
outputs, 2 HDMI outputs or DXLink output
(2) HDMI connections support digital versions of
analog audio or direct pass-through audio
(1) DXLink support digital version of analog audio or
direct pass-through
Yes, stereo audio from any input can be embedded to
or de-embedded from its associated video, processed
through DSP, and switched independently to any
analog, HDMI or DXLink output (and picked up by the
S/PDIF output which mirrors one of the others)
MULTI-FORMAT VIDEO WITH DVI-I
Multi-Format Input Connections
Multi-Format Supported Video
Pixel Clock (Max)
Input Equalization
Input Re-Clocking (CDR)
(2) DVI-I; Ports (1-2)
HDMI/HDCP, DVI/HDCP, RGB, S-Video, Composite,
Component (Y/Pb/Pr)
See specifications for each signal style over DVI-I for
more detail
165 MHz (225 MHz in pass-thru mode up to 1080p)
Yes
Yes
COMPONENT (Y/Pb/Pr) WITH DVI-I
Input Level
Input Impedance
Note
1 Vp-p nominal
75 Ohms, nominal
Requires DVI-I to 3 RCA Adapter or DVI-I to 5 BNC
Adapter
AC coupled: Insensitive to DC offset
S-VIDEO WITH DVI-I
Input Level
Input Impedance
Note
1 Vp-p nominal
75 Ohms, nominal
Requires DVI-I to S-Video Adapter
AC coupled: Insensitive to DC offset
COMPOSITE WITH DVI-I
Input Level
Input Impedance
Note
1 Vp-p nominal
75 Ohms, nominal
Requires DVI-I to 3 RCA Adapter or DVI-I to 5 BNC
Adapter
AC coupled: Insensitive to DC offset
RGBHV WITH DVI-I
Supported Video
Input Level
Input Impedance
Sync Input Level
RGBHV, RGBS, RGsB
1 Vp-p nominal
75 Ohms, nominal
2 to 5 Vp-p
7
Sync Input Impedance
Note
2.5 pf Typical, 10pF Maximum
Requires DVI to HD-15 Adapter or DVI-I to 5 BNC
Adapter
DVI WITH DVI-I
Supported Video
Sync Input Level
Sync Input Impedance
Note
DVI 1.0
2 to 5 Vp-p
2.5 pf Typical, 10pF Maximum
Format: RGB
HDMI WITH DVI-I
HDCP Compliance
Note
Yes
Requires DVI to HDMI Adapter
Signal Types: Supports full matrix switching, video
processing and scaling of 8 bit per color standard Input
video signals. Supports full matrix switching and passthru of all HDMI compliant video signals including 3-D
and Deep Color
HDMI WITH HDMI Type A Female
Input Connections
Input Signal Type Support
Data Rate (Max)
Pixel Clock (Max)
Input Equalization
Input Re-Clocking (CDR)
Output Connections
Output Signal Type Support
Output Scaling
Deep Color Support
Color Space Support
3D Format Support
HDCP Compliance
Audio Format Support for HDMI
Note
(4) HDMI Type A Female, Ports (3-6)
HDMI/HDCP, DVI/HDCP, Display Port ++
4.95 Gbps (6.75 Gpbs in passthru mode up to 1080p)
165 MHz (225 MHz in passthru mode up to 1080p)
Yes
Yes
(2) HDMI Type A Female, Ports (1-2)
HDMI/HDCP, DVI/HDCP
SmartScale or Manual Configuration or Bypass
SmartScale output resolution support: All resolutions
between 480p and 1920 x 1200 @ 60 Hz via automatic
SmartScale query of the display's declared EDID
Detailed Timing Definition
Scaled Outputs: 24-bit, Passthru Outputs: 30-bit, 36bit
Y,Cb,Cr & RGB
Yes, when in Bypass mode, HDMI primary formats
Yes
Supports Dolby TrueHD, Dolby Digital, DTS-HD Master
Audio, DTS, L-PCM
DisplayPort ++ requires DisplayPort to HDMI adapter
cable
Supports full matrix switching, video processing and
scaling of 8 bit per color standard Input video signals.
Supports full matrix switching and pass-thru of all
HDMI compliant video signals including 3-D and Deep
Color
Each output can deliver processed and scaled video or
pass-thru video from any video input
Each output can embed audio from any of the 3 analog
8
audio outputs as Stereo L-PCM or can pass-thru Dolby
TrueHD, Dolby Digital, DTS-HD Master Audio, DTS and
L-PCM audio from the selected video source
DXLINK WITH RJ-45
Output Connections
Output Compatible Formats
(1) RJ-45; Port (3)
Digital Video with embedded audio, analog audio,
Ethernet, Bi directional control
Supports full matrix switching and pass-thru of all
HDMI compliant video signals including 3-D and Deep
Color
Output Re-Clocking
Output Scaling
HDCP Support
Twisted Pair Cable Type
Note
Audio Signal Types: Supports Dolby TrueHD, Dolby
Digital, DTS-HD Master Audio, DTS, L-PCM
Yes
SmartScale or Manual Configuration or Bypass
Yes
Shielded Cat6, Cat6A and Cat7
DXLink twisted pair cable runs for DXLink equipment
shall only be run within a common building where a
common building is defined as: the walls of the
structure(s) are physically connected and the
structure(s) share a single ground reference
For more details and helpful cabling information,
reference the white paper titled Cabling for Success
with DXLink, or contact your AMX representative
Supports full matrix switching, video processing and
scaling of 8 bit per color standard Input video
ANALOG AUDIO
Analog Audio Input Connections
Input Level (Nominal)
Input Level (Maximum)
Input Impedance
Analog Audio Output Connections
Volume Control
Balance Control
(2) female 1/8” stereo mini-phono jacks; support
unbalanced audio
(2) 3.5 mm 5-position captive-wire terminals; support
balanced (differential) or unbalanced (single-ended)
stereo audio
+4 dBu (1.228 Vrms) balanced or -10 dBV (0.3162
Vrms) unbalanced
+14 dBu
>17 KOhms balanced, >10 KOhms unbalanced
DVX-2150HD-SP (FG1905-11):
(1) Amplified audio output; 4-position captive wire
connector; supports amplified, variable, mono or
stereo audio
(2) Line level audio output; supports balanced or
unbalanced mono or stereo
DVX-2150HD-T (FG1905-13):
(1) Amplified audio output; 2-position captive wire
connectors; supports 70V or 100V mono audio –
connect a speaker to either but not both
simultaneously
(2) Line level audio output; supports balanced or
unbalanced mono or stereo
-100dB to +0dB in 1dB steps
20 steps each left and right
9
Output Level (Maximum)
Output Impedance
Audio Channel Crosstalk
Audio Frequency Response
Audio Input Compression
Audio Input Gain Compensation
Audio Output Equalizer
Audio Output Sync Delay
Audio S/N Ratio
Audio THD+N
Note
+17 dBu (line level)
200 Ohms (line level)
Balanced Line Inputs: -98dB @ 0dBV, 20Hz to 20KHz
Unbalanced Line Inputs: -70dB @0dBV, 20Hz to 20KHz
AMP: 20Hz to 20kHz ±0.75dB @ 8 ohms
Line: 20Hz to 20KHz ±0.1dB
Independent Compression per input
Attack: 1 to 2000 ms
Release: 10 to 5000 ms
Compression Ratio: 1 to 20
Threshold: -60 to 0 dB
-24 dB to +24 dB, 1 dB steps
10-band parametric EQ with variable center frequency,
filter type and Q per band
Center Frequency: 20 Hz to 20 kHz
EQ Gain: -12 to +12 dB
Q: 0.1 to 20
Filter Types: Bell, Base Shelving, Treble Shelving, Low
Pass, High Pass, Band Pass, Band Stop
0 to 200 ms
AMP: 85 dB @ 8 Ohms, full output, 1 kHz A-weighted
Line: 105dB @ 10dBV, AES17
AMP: < 0.15% @ 8 Ohms, 20 Watts, 20 Hz to 20 kHz
Line: 0.003% @ 0 dBV, 1 kHz
Independent EQ, Volume and Balance control per
output
MICROPHONE AUDIO
Microphone Input Connections
Microphone Input Level (Maximum)
Microphone Input Format Support
Microphone Input Impedance
Microphone Input Gain
Microphone Input Equalizer
Microphone Input Compression
Microphone Gating
Microphone Limiter
(2) 3.5 mm 3-pin captive-wire MIC connectors;
supports up to two mono microphones, unbalanced or
balanced audio
5 dBu
Line or Mic level, balanced or unbalanced audio
3.5 kOhms, accepts 60 to 600 Ohms sources
-24 dB to +89 dB, 1dB steps
3-band parametric EQ with variable center frequency,
filter type and Q
Center Frequency: 20 Hz to 20 kHz
EQ Gain per Band: -12 to +12 dB
Q per band: 0.1 to 20
Filter Types: Bell, Base Shelving, Treble Shelving, Low
Pass, High Pass, Band Pass, Band Stop
Independent Compression per Microphone
Attack: 1 to 2000 ms
Release: 10 to 5000 ms
Compression Ratio: 1 to 20
Threshold: -60 to 0 dB
Independent Gating per Microphone
Attack: 1 to 2000 ms
Release: 10 to 5000 ms
Depth: 0 to 20 dB
Hold Off: 0 to 2000 ms
Threshold: -60 to 0 dB
Independent Limiting per Microphone
Attack: 1 to 2000 ms
Release: 10 to 5000 ms
Threshold: -60 to 0 dB
10
Microphone Ducking
Microphone Inputs Note
Independent Ducking per each of 3 audio paths
Attack: 1 to 2000 ms
Release: 10 to 5000 ms
Attenuation: 0 to 20 dB
Hold Off: 0 to 4000 ms
Threshold: -60 to 0 dB
Phantom Power: switchable 48 V to each microphone
@ 8 mA total
S/PDIF DIGITAL AUDIO
S/PDIF Audio Outputs
(1) S/PDIF output; mirrors either of the 3 analog audio
outputs, 2 HDMI outputs or DXLink output
S/PDIF Audio Output Note
Output can mirror any of the 3 analog audio outputs as
stereo digital audio, or L-PCM, Dolby Digital and DTS
audio being passed-thru to any of the 2 HDMI outputs
or 1 DXLink output
For a more detailed PDF or DXF pictorial drawing please visit: http://www.amx.com/products/DVX-2150HD.asp
11
About AMX by HARMAN
Founded in 1982 and acquired by HARMAN in 2014, AMX® is dedicated to providing AV solutions for an IT World. AMX solves the complexity of
managing technology with reliable, consistent and scalable systems comprising control, video switching and distribution, digital signage and technology
management. AMX systems are deployed worldwide in conference rooms, classrooms, network operation/command centers, homes, hotels,
entertainment venues and broadcast facilities, among others. AMX is part of the HARMAN Professional Group, the only total audio, video, lighting, and
control vendor in the professional AV market. HARMAN designs, manufactures and markets premier audio, video, infotainment and integrated control
solutions for the automotive, consumer and professional markets. Revised 11.4.14. ©2014 Harman. All rights reserved. Specifications subject to change.
www.amx.com | +1.469.624.7400 |800.222.0193
12