Casio TK3200 pgm - SALOP CASH REGISTERS WEBSITE

ELECTRONIC CASH REGISTER
TK-3200
DEALER'S MANUAL
Version 1.0 October 2005
Eu
Di
U.K.
NINS
Introduction & Contents
This manual is intended to be used as a reference to the TK-3200 system. It provides details to allow whole understanding
of the system capabilities, its operation, and how it can be used to solve many problems within the retail outlet.
This manual consists of the following chapters:
1. Hardware configuration (for installation)
This chapter describes the hardware of these models and their network systems.
2. IPL (initial program loading)
This chapter describes how to download the application program to the terminal.
3. Initialization
This chapter describes how to set up the peripheral devices and the terminals.
4. Programming
This chapter explains actual programming procedure and functions.
5. Manager mode
6. X/Z report
7. Application system
8. Tips
9. Appendix:
Printing history
Manual version
Version 1.0 : August 2005
Version 1.01 : October 2005
Software version
Version 1.0.0
Version 1.0.1
Revised points
Version 1.01: Correction of mistakes come from the specification group
Version name: Page 1, 232
Revised points: Page 2
Revised pages: 2, 24-26, 46, 110, 111, 188-190, 196, 199, 200, 202-205, 207-214
Revised page: 18 (modification of clerk assignment method mistake)
Revised page: 163 (modification of report format mistake)
✍ Version 1.01
2
NINS
Hardware configuration .............................................................................................. 11
General configuration ...................................................................................................................... 11
Hardware diagram ........................................................................................................................... 12
Input/output connectors ................................................................................................................... 13
Online configuration.................................................................................................... 14
Peripheral ports and their connectable devices ............................................................................... 14
IPL (Initial program loading).............................................................................. 15
Memory map of the terminal ....................................................................................... 15
System configuration and procedure ........................................................................ 15
Via COM1 port (to receive IPL data from PC) .................................................................................. 15
Via CF card (to send the IPL data to register) ................................................................................. 16
Via COM1 port (to send IPL data from register) ............................................................................. 16
Via CF card (to send the IPL data to CF card) ................................................................................. 16
Initialization ........................................................................................................ 17
Machine initialization procedure ................................................................................ 17
Flag clear operation ..................................................................................................... 19
Init 2 operation ............................................................................................................. 19
Entering diag mode ..................................................................................................... 20
Password ...................................................................................................................... 20
Programming (General explanation) ................................................................ 21
Program sub mode (P1 thru P7 mode) ...................................................................... 21
Entering the program sub mode ...................................................................................................... 21
File allocation (Program 5) ................................................................................ 23
File allocation program ............................................................................................... 23
Programming procedure .................................................................................................................. 23
Issuing program reading report of program 5 mode ................................................ 27
Issuing procedure ............................................................................................................................ 27
Report sample ................................................................................................................................. 27
Key allocation (Program 4) ................................................................................ 29
Key allocation program ............................................................................................... 29
Programming procedure .................................................................................................................. 29
Configuration of the physical key layout ................................................................... 30
Issuing program reading report of program 4 mode ................................................ 32
Issuing procedure ............................................................................................................................ 32
Report sample ................................................................................................................................. 32
Key function/machine feature (Program 3) ...................................................... 33
General control program ............................................................................................. 33
Programming procedure .................................................................................................................. 33
Program data (by address code) ..................................................................................................... 33
Address code 01 (date order/password) ...............................................................................................
Address code 02 (password) ................................................................................................................
Address code 03 (consecutive number) ...............................................................................................
Address code 04 (tax system, rounding, etc.) .......................................................................................
Address code 05 (print control for receipt) ............................................................................................
Address code 06 (calculation & operation control) ................................................................................
Address code 07 (menu & price shift) ...................................................................................................
Address code 08 (print control for fixed total report) .............................................................................
Address code 09 (print control for fixed total report) .............................................................................
Address code 10 (print control for taxable amount, till timer) ................................................................
Address code 13 (online control) ..........................................................................................................
Address code 14 (currency exchange control) ......................................................................................
Address code 15 (print control for reports) ............................................................................................
Address code 16 (print control for grand total) ......................................................................................
TK-3200 Dealer's Manual
33
33
33
34
35
36
37
38
39
40
41
41
42
43
3
NINS
Introduction & Contents
System configuration ........................................................................................ 11
Introduction & Contents
Address code 17 (print control) .............................................................................................................
Address code 18 (print control for guest receipt and slip) .....................................................................
Address code 19 (order control) ............................................................................................................
Address code 21 (message control) .....................................................................................................
Address code 25 (condiment etc.) ........................................................................................................
Address code 26 (check tracking) .........................................................................................................
Address code 27 (clerk control) ............................................................................................................
Address code 28 (Euro) ........................................................................................................................
Address code 29 (Euro) ........................................................................................................................
Address code 32 (direct maintenance PLU) .........................................................................................
Address code 31 (scanning) .................................................................................................................
Address code 33 (batch PLU maintenance) .........................................................................................
Address code 36 (store/recall/auto new check number) .......................................................................
Address code 37 (check number) .........................................................................................................
44
45
45
46
47
47
47
48
48
49
49
50
51
51
Department key/flat-PLU key/PLU program (Batch feature programming) ............ 52
Programming procedure .................................................................................................................. 52
Program data ................................................................................................................................... 52
Department key/flat-PLU key/PLU program (Individual feature programming) ..... 54
Programming procedure .................................................................................................................. 54
Program data (by address code) ..................................................................................................... 54
Transaction key program ............................................................................................ 57
Programming procedure .................................................................................................................. 57
Program data ................................................................................................................................... 57
Clerk program .............................................................................................................. 80
Secret number, drawer, check number programming ...................................................................... 80
Clerk detail link programming .......................................................................................................... 80
Clerk other programming ................................................................................................................. 81
Other programs ............................................................................................................ 83
Time range programming ................................................................................................................ 83
Table range programming ................................................................................................................ 83
Tax table programming .................................................................................................................... 84
Set menu programming ................................................................................................................... 87
Batch X/Z report programming ........................................................................................................ 87
Arrangement programming .............................................................................................................. 88
Check print control programming ..................................................................................................... 88
Mix & match programming ............................................................................................................... 89
Employee number programming ..................................................................................................... 90
Scheduler programming .................................................................................................................. 91
Bottle link table programming .......................................................................................................... 93
I/O parameter table programming .................................................................................................... 94
Printer connection table programming ............................................................................................. 95
Non PLU table programming ........................................................................................................... 96
Scanning PLU maintenance programming ............................................................... 97
Batch maintenance PLU programming ............................................................................................ 97
Activation of batch maintenance PLU .............................................................................................. 97
Scanning PLU direct maintenance programming ............................................................................ 98
Scanning PLU individual programming ............................................................................................ 99
One touch NLU programming ........................................................................................................ 101
Issuing program reading report of program 3 mode .............................................. 102
Issuing procedure .......................................................................................................................... 102
Report sample ............................................................................................................................... 102
Character (Program 2) ..................................................................................... 103
Programming descriptors ......................................................................................... 103
Programming procedure ................................................................................................................ 103
Programming data ......................................................................................................................... 103
4
NINS
Programming item/key descriptors.......................................................................... 112
Introduction & Contents
Programming procedure ................................................................................................................ 112
Programming data ......................................................................................................................... 112
Programming item/clerk descriptors by range ....................................................... 114
Programming procedure ................................................................................................................ 114
Program data ................................................................................................................................. 114
Entering characters ................................................................................................... 115
By character keyboard ................................................................................................................... 115
Character code list ......................................................................................................................... 116
By character code .......................................................................................................................... 116
Editing characters ..................................................................................................... 117
Correcting a character just entered ............................................................................................... 117
Correcting and adding a PLU descriptor already set ..................................................................... 117
Correcting a key descriptor already set ......................................................................................... 117
Correcting a message descriptor already set ................................................................................ 117
Issuing program reading report of program 2 mode .............................................. 118
Issuing procedure .......................................................................................................................... 118
Report sample ............................................................................................................................... 118
Unit price/rate (Program 1) .............................................................................. 119
Date/time setting ........................................................................................................ 119
Date setting .................................................................................................................................... 119
Time setting ................................................................................................................................... 119
Unit price program ..................................................................................................... 119
Programming procedure ................................................................................................................ 119
Rate program ............................................................................................................. 121
<Currency exchange> ................................................................................................................... 121
<Check>, <New balance>, <Premium (%+)>, <Discount (%–)>, <Rate tax> ................................ 121
Amount program ........................................................................................................ 121
<Cash>, <Check>, <New balance>, <Plus (+)>, <Minus (–)>, <Coupon> .................................... 121
Scanning PLU direct maintenance programming .......................................................................... 121
Issuing program reading report of program 1 mode .............................................. 122
Issuing procedure .......................................................................................................................... 122
Report sample ............................................................................................................................... 122
Program reading (Program 6) ......................................................................... 123
Issuing program reading report ............................................................................... 123
Issuing procedure .......................................................................................................................... 123
Report code ................................................................................................................................... 123
Report sample ............................................................................................................ 124
Fixed totalizer ................................................................................................................................ 124
Transaction key ............................................................................................................................. 124
PLU ................................................................................................................................................ 125
Department .................................................................................................................................... 126
Group ............................................................................................................................................. 126
Clerk .............................................................................................................................................. 127
Hourly sales ................................................................................................................................... 127
Scanning PLU ................................................................................................................................ 127
Table analysis ................................................................................................................................ 128
Grand total ..................................................................................................................................... 128
General control .............................................................................................................................. 128
Special character ........................................................................................................................... 128
Report header ................................................................................................................................ 129
Tax table ........................................................................................................................................ 129
Set menu table ............................................................................................................................... 129
Batch X/Z ....................................................................................................................................... 129
TK-3200 Dealer's Manual
5
NINS
Introduction & Contents
Clerk detail link .............................................................................................................................. 130
Receipt message ........................................................................................................................... 130
Check endorsement ....................................................................................................................... 130
Slip/external printer message ........................................................................................................ 131
Arrangement table ......................................................................................................................... 131
Character recall ............................................................................................................................. 131
Non-PLU table ............................................................................................................................... 131
Check print control ........................................................................................................................ 131
Mix & match ................................................................................................................................... 132
Employee ....................................................................................................................................... 132
Scheduler ....................................................................................................................................... 132
Bottle link table .............................................................................................................................. 132
One touch NLU .............................................................................................................................. 133
Help message ................................................................................................................................ 133
Terminal connection table .............................................................................................................. 133
Printer connection table ................................................................................................................. 133
AT command .................................................................................................................................. 134
Online password ............................................................................................................................ 134
I/O parameter table ........................................................................................................................ 134
Miscellaneous message ................................................................................................................ 134
Printing guidance message ........................................................................................................... 134
Error message ............................................................................................................................... 135
Registration guidance message .................................................................................................... 135
X/Z guidance message .................................................................................................................. 135
Program guidance message .......................................................................................................... 135
Auto-program & system utilities (Program 7) ............................................... 137
Auto-programming .................................................................................................... 137
Auto-programming functions .......................................................................................................... 137
Auto-programming operation ......................................................................................................... 140
Other utilities .................................................................................................................................. 141
Manager operation ........................................................................................... 143
Manager control mode (X1 mode) ............................................................................ 143
Entering the manager control mode .............................................................................................. 143
Assign drawers for each clerk ........................................................................................................ 143
Stock quantity maintenance (PLU/flat PLU/scanning PLU) ................................... 144
To add to the actual stock quantity of a PLU/flat PLU/scanning PLU ............................................ 144
To subtract from the actual stock quantity of a PLU/flat PLU/scanning PLU ................................. 144
To input the new stock quantity of a PLU/flat PLU ......................................................................... 145
Clerk assignment ....................................................................................................... 145
To link clerk button/key to interrupt buffers .................................................................................... 145
To link clerk secret numbers to interrupt buffers ............................................................................ 145
To link clerk numbers to clerk number keys ................................................................................... 145
Programming for the Euro ........................................................................................ 146
Programming for the Australian GST ...................................................................... 148
Programming of items in the program 1 mode ....................................................... 148
To enter the program 1 mode ........................................................................................................ 148
To exit the program 1 mode ........................................................................................................... 148
Read/reset report issuance ............................................................................. 149
Preparation for issuing report .................................................................................. 149
Money declaration ......................................................................................................................... 149
Password (X2/Z2 mode) ................................................................................................................ 149
Issuing read/reset report .......................................................................................... 149
Programmability ............................................................................................................................. 150
Issuing procedure .......................................................................................................................... 150
Report sample ............................................................................................................................... 154
6
NINS
Introduction & Contents
Financial report .............................................................................................................................. 154
Individual item/key report ............................................................................................................... 154
Fixed total report ............................................................................................................................ 155
Transaction key report ................................................................................................................... 156
PLU report ..................................................................................................................................... 157
PLU stock report ............................................................................................................................ 158
Department report .......................................................................................................................... 159
Group report .................................................................................................................................. 160
Clerk report .................................................................................................................................... 161
Hourly sales report ......................................................................................................................... 162
Monthly report ................................................................................................................................ 162
Table analysis report ...................................................................................................................... 163
Open check report ......................................................................................................................... 163
Scanning PLU report ..................................................................................................................... 164
Scanning PLU stock report ............................................................................................................ 166
Mix & match report ......................................................................................................................... 166
Time & attendance report .............................................................................................................. 167
File reset ........................................................................................................................................ 167
Application systems ........................................................................................ 169
Scanning PLU ............................................................................................................ 169
System configuration of the scanning PLU system ....................................................................... 169
Barcode system ............................................................................................................................. 169
PLU maintenance .......................................................................................................................... 170
Scanning PLU registration ............................................................................................................. 171
Mix & match discount ..................................................................................................................... 173
Check tracking system .............................................................................................. 174
System configuration ..................................................................................................................... 174
Printing on the external printers .............................................................................. 175
System configuration of the external printer system ...................................................................... 175
Backup system .............................................................................................................................. 175
Printing control options for order .................................................................................................... 176
Time and attendance ................................................................................................. 176
Tips ....................................................................................................................177
Future order ............................................................................................................... 177
Usage ............................................................................................................................................ 177
Preparation .................................................................................................................................... 177
Eat-in/takeout ............................................................................................................. 177
Automatic execution of Euro switchover by arrangement and scheduler ........... 178
Appendix: Calculation method ....................................................................... 179
Fixed total file............................................................................................................. 179
Appendix: Font code tables ............................................................................ 181
Standard font set (default) ........................................................................................ 181
Multilingual + Euro (Windows code page 858) .............................................................................. 181
Special font set .......................................................................................................... 182
Slavic (Windows code page 852) .................................................................................................. 182
Greek ............................................................................................................................................. 182
Cyrillic (Windows code page 866) ................................................................................................. 183
Baltic .............................................................................................................................................. 183
Arabic ............................................................................................................................................. 184
Appendix: Peripheral device configuration ................................................... 185
UP-360......................................................................................................................... 185
SP-1300 ....................................................................................................................... 185
Quick scan 6000......................................................................................................... 186
TK-3200 Dealer's Manual
7
NINS
Introduction & Contents
Appendix: File record format .......................................................................... 187
Fixed totalizer file ...................................................................................................... 187
Fixed totalizer (daily) ...................................................................................................................... 187
Fixed totalizer (periodic/consolidation) .......................................................................................... 187
Transaction key file ................................................................................................... 188
Transaction key (daily) ................................................................................................................... 188
Transaction key (periodic/consolidation) ....................................................................................... 188
PLU file ....................................................................................................................... 188
PLU (daily) ..................................................................................................................................... 188
PLU (periodic/consolidation) .......................................................................................................... 188
Department file .......................................................................................................... 189
Department (daily) ......................................................................................................................... 189
Department (periodic/consolidation) .............................................................................................. 189
Group file .................................................................................................................... 189
Group (daily) .................................................................................................................................. 189
Group (periodic/consolidation) ....................................................................................................... 189
Clerk file...................................................................................................................... 190
Clerk (programming) ...................................................................................................................... 190
Clerk detail (daily, periodic/consolidation) ...................................................................................... 190
Clerk detail link (program) .............................................................................................................. 190
Hourly sales file ......................................................................................................... 191
Hourly sales (daily) ........................................................................................................................ 191
Hourly sales (periodic/consolidation) ............................................................................................ 191
Monthly sales file ....................................................................................................... 191
Monthly sales (daily, periodic/consolidation) .................................................................................. 191
Scanning PLU files .................................................................................................... 192
Scanning PLU file (daily) ............................................................................................................... 192
Non PLU table file (program) ......................................................................................................... 192
Batch maintenance PLU file (program) .......................................................................................... 192
Direct maintenance PLU file (program) ......................................................................................... 192
One touch NLU table file ................................................................................................................ 193
Mix & match table file ................................................................................................ 193
Mix & match table file (daily) .......................................................................................................... 193
Mix & match table file (periodic/consolidation) ............................................................................... 193
Bottle link table file .................................................................................................... 193
Bottle link table file (program) ........................................................................................................ 193
Table analysis file ...................................................................................................... 194
Table analysis (daily) ..................................................................................................................... 194
Table analysis (periodic/consolidation) .......................................................................................... 194
Time and attendance file ........................................................................................... 194
Time and attendance (daily) .......................................................................................................... 194
Employee file ................................................................................................................................. 194
Grand total file ........................................................................................................... 195
Grand total (daily) .......................................................................................................................... 195
Grand total (consolidation) ............................................................................................................. 195
General control file .................................................................................................... 195
General control .............................................................................................................................. 195
Special character file ................................................................................................. 196
Special character ........................................................................................................................... 196
Report header file ...................................................................................................... 196
Report header ................................................................................................................................ 196
Tax table file ............................................................................................................... 196
Tax table ........................................................................................................................................ 196
8
NINS
Set menu table file ..................................................................................................... 196
Introduction & Contents
Set menu table ............................................................................................................................... 196
Batch X/Z file .............................................................................................................. 197
Batch X/Z ....................................................................................................................................... 197
Receipt message file ................................................................................................. 197
Receipt message ........................................................................................................................... 197
Check endorsement message file ............................................................................ 197
Check endorsement message ....................................................................................................... 197
Slip/local/remote printer message file ..................................................................... 197
Slip/local/remote printer message ................................................................................................. 197
Arrangement file ........................................................................................................ 198
Arrangement file ............................................................................................................................ 198
Character recall file ................................................................................................... 198
Character recall ............................................................................................................................. 198
Check print file ........................................................................................................... 198
Check print ..................................................................................................................................... 198
Scheduler file ............................................................................................................. 198
Scheduler ....................................................................................................................................... 198
System files ................................................................................................................ 199
Character key table file .................................................................................................................. 199
Key table file .................................................................................................................................. 199
Terminal connection table file ........................................................................................................ 200
Printer connection table ................................................................................................................. 200
Operation start date file ................................................................................................................. 200
Initialize code file ........................................................................................................................... 200
AT command file ............................................................................................................................ 201
Online password file ...................................................................................................................... 201
I/O parameter table file .................................................................................................................. 201
System error log file ....................................................................................................................... 201
Graphic image files.................................................................................................... 201
Graphic logo file (for external printer) ............................................................................................ 201
Guidance message files ............................................................................................ 202
Error message file .......................................................................................................................... 202
Miscellaneous message file ........................................................................................................... 206
Printing guidance message file ...................................................................................................... 207
X/Z guidance message file ............................................................................................................ 209
Program guidance message file .................................................................................................... 211
Registration guidance message file ............................................................................................... 214
Help message file .......................................................................................................................... 215
Appendix: Compulsory .................................................................................... 219
Appendix: Error code ....................................................................................... 221
Index ................................................................................................................. 225
TK-3200 Dealer's Manual
9
NINS
Introduction & Contents
10
NINS
System configuration
System configuration
Hardware configuration
General configuration
1
2
3
4
5
6
7
8
9
0
A
Operator display
Customer display (Popup display)
Stroke keyboard
Touch keyboard
Sheet holder
CF card slot cover
Printer cover
Mode switch
Power switch cover
Connector cover (left side)
Connector cover (back side)
2
7
A
1
4
3
8
9
0
6
5
TK-3200 Dealer's Manual
11
NINS
System configuration
sheet holder
CF card
I/O PB-18
drawer
external printer
slip printer
multi drawer
scanner
HHS-15
SP-1300
Hardware diagram
Main Display
Popup
display
Journal printer
Sheet ke
y holder
Keyboard
Receipt printer
Power
supply
CPU
Flash
Memory
RAM
512kB
2MB
2 i/f
Drawer
Drawer
RS232C
COM2
CF card
MODEM
or
PC
Scanner
HHS-15
Slip
printer
SP-1300
Power
supply
31AD-U/E
Note: Shadowed device and dot line indicate option devices.
12
NINS
PRT-CB-8A/-8B
1 i/f
RS232C
COM1
PRT-CB-8C
Drawer
PRL-CB-2
Drawer
Multi drawer kit MDL-10
Popup
disp.
i/f
External
printer
UP-360
Power
supply
Input/output connectors
Power switch
System configuration
Main power switch is located in the power switch cover.
Power switch cover
Input /output connectors
COM 1 port is located in the leftside connector cover.
COM 2 port, and drawer cable are located in the backside connector cover.
Left side of the terminal
COM1
COM2
Drawer cable
Rear side of the terminal
Power cord
COM2
TK-3200 Dealer's Manual
13
NINS
System configuration
Online configuration
Peripheral ports and their connectable devices
Model
Device
TK-3200
COM1
MODEM/PC
✔
External printer
(Max. 2 printers,
except slip)
✔
COM2
✔
Slip printer
✔
Scanner
✔
Drawer
✔: can connect
COM port
Drawer
port
1 (Max 2)
* Option
Available device/cable list
External printer:
UP-360
Printer cable:
PRT-CB-8A(3m) or PRT-CB-8B(5m)
Slip printer:
SP-1300
Printer cable:
PRT-CB-8C
Power supply:
AD31U or AD31E
Scanner (Hand-held):
HHS-15
Scanner (LASER):
PSC Quick Scan 6000
Scanner (Fixed)
PSC HS1250
MODEM:
US Robotics SPORTS STAR 56.4kbps
PC cable:
PRL-CB-2
Steps to define COM port/peripheral devices
After connecting peripheral devices, programming of I/O parameter table, printer connection table are necessary.
START
No
No
Connect Modem or PC?
Yes
Yes
Connect it to free COM1 or COM2 port.
Connect it to COM1 port.
No
No
Connect a scanner?
Yes
Connect it to COM2 port.
Connect a slip printer?
Connect external printer(s)?
Yes
Connect it (them) to free COM port(s).
END
14
NINS
IPL (Initial program loading)
IPL should be made before initializing when the application program has been modified.
Memory map of the terminal
IPL
The application programs are downloaded from PC (via COM port)/CF card to the internal flash memory.
CF card
backup data
program data
RAM
totalizer/counter,
work area
Flash memory
Application program
ROM
bios, program loader
some diagnosis
5
Application program
IPL
System configuration and procedure
Via COM1 port (to receive IPL data from PC)
COM1 port
PC
Operation
1. Set the mode switch to PGM position and turn off the power switch.
(Refer page 13 of this manual for the location of the power switch.)
2. While holding down the <JOURNAL FEED>, turn on the register.
3. Release <JOURNAL FEED> after the register shows “INIT”.
4. Enter “44449999” and press <SUBTOTAL>.
5. Enter “0” (communication speed: 38400 bps) and press <SUBTOTAL>.
6. Start the IPL program of the PC.
TK-3200 Dealer's Manual
15
NINS
IPL (Initial Program Loading)
Via COM1 port (to send IPL data from register)
Operation
1. Turn to PGM mode.
2. Enter “7” and press <SUBTOTAL>.
3. Enter “180” and press <SUBTOTAL>.
4. Enter “49” and press <CASH>.
(In case of quitting, press <SUBTOTAL> instead of <CASH>.)
(Communication speed is fixed; 38400 bps.)
Via CF card (to send the IPL data to CF card)
CF card
Operation
Never plug/unplug the CF card during IPL.
1. Turn OFF the register.
2. Open the CF card slot cover and insert the CF card securely.
(Please check that the CF card is vacant. Refer to the “System utility section in PGM7”.)
3. Turn to PGM mode.
4. Enter “7” and press <SUBTOTAL>.
5. Enter “170” and press <SUBTOTAL>.
6. Enter “49” and press <CASH>.
(In case of quitting, press <SUBTOTAL> instead of <CASH>.)
7. Turn OFF the register and pull out the CF card.
Via CF card (to send the IPL data to register)
CF card
Never plug/unplug the CF card during IPL.
Operation
1. Set the mode switch to PGM position and turn off the power switch.
(Refer page 13 of this manual for the location of the power switch.)
2. Open the CF card slot door and insert the CF card securely.
3. While holding down the <JOURNAL FEED>, turn on the register.
4. Release <JOURNAL FEED> after the register shows “INIT”.
5. Enter “44449999” and press <SUBTOTAL>.
6. Enter “20” and press <SUBTOTAL>.
16
NINS
Initialization
Machine initialization procedure
REG2
REG1
OFF
2. Set the mode switch to PGM position and turn off the power switch.
(Refer page 13 of this manual for the location of the power switch.)
X1
Z1
X2/Z2
RF
PGM
3. While holding down <JOURNAL FEED>, turn on the register.
RECEIPT
FEED
4. Release <JOURNAL FEED>.
You should see “0000000000” on the display.
If 10 zeros are not shown or another character are shown,
immediately set the mode switch to OFF and restart from
the beginning of this procedure.
RECEIPT
FEED
JOURNAL
FEED
5. Enter 11-digit program code from the worksheet.
6. Press <SUBTOTAL> to register the program code.
(Wait until beep twice.)
D11D10D9D8 ~ D3D2D1 s
refer to Worksheet (Initialize)
7. Enter “000”.
D3D2D1
s
8. Press <SUBTOTAL> to register the program code.
After completion of initialization and program
loading, initialization receipt is issued.
TK-3200 Dealer's Manual
17
NINS
Initialization
1. Plug the power cord into an AC outlet.
Initialization
Worksheet (Initialize)
Description
Choice
Program code
Yes = 0
No = 4
:
Password in PGM3 ~ 7 mode
Significant
numbers
::::
Messages and descriptors are written in
English = 0, French = 1, Spanish = 2, German = 4
Significant
number
:
Significant
number
:
Print password of PGM mode, when flag clear operation is performed.
Model for
German (Date order: day/month/year)
Other area (~00, Date order: day/month/year)
Other area (0, Date order: day/month/year)
= 4,
= 1,
=3
D11
D10 D9 D8 D7
D6
D5
;K
Fixed value: 08
D4 D3
Use
1 clerk switch (clerk push switch)/
2 Clerk secret number key *
a
Initialization pattern:
1 For scanning/2 For check tracking
b
1=0
2=1
1=0
2=2
No = 0
Yes = 1
Use Euro only.
:
(a+b)
D2
:
D1
*
When you select this option “Use clerk secret code key”, and your register doesn’t have this key on the default keyboard,
be sure to allocate <CLERK-#> (clerk secret number key) just after the initialization.
(Do NOT turn to OFF before allocating this key.)
Note:
Please check the receipt after initialization operation (machine initialization, flag clear operation and init2) that the machine
number is printed properly.
If error codes are printed on it, check the hardware and retry the operation.
P01 03-04-2004 11:58
C01
MC#01
000001
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
INIT
(C) 2005 by CASIO
COMPUTER CO.,LTD.
All rights reserved.
— INIT symbol
TK-3200 STD
— Model name
VER.
LABEL
— ROM version
— ROM label
:nnnn
:nnnnnn
VER.
:nnnn
00
LABEL :nnnnnn
INIT. :nnnnnnnnnnnnnn
0004-98
2000
:
— Copyright
—
—
—
—
ROM version
ROM label
Initialization code
I/O parameter table record No./error code
✍ Version 1.01
18
NINS
Flag clear operation
REG2
REG1
2. Set the mode switch to PGM position and turn off the power switch.
(Refer page 13 of this manual for the location of the power switch.)
X1
Z1
OFF
X2/Z2
RF
PGM
JOURNAL
FEED
3. While holding down <RECEIPT FEED>, turn on the register.
4. Release <RECEIPT FEED>.
You should see “FFFFFFFFFF” on the display.
If 10 Fs are not shown or another character are shown,
immediately set the mode switch to OFF and restart from
the beginning of this procedure.
5. Press <SUBTOTAL> to complete.
RECEIPT
FEED
JOURNAL
FEED
After completion of flag clear, receipt is issued.
Note: After flag clear, clerk 1 is assigned automatically. So do not program clerk 1 as not assignable or
not operable in PGM mode.
Init 2 operation
1. Plug the power cord into an AC outlet.
REG2
REG1
2. Set the mode switch to PGM position and turn off the power switch.
(Refer page 13 of this manual for the location of the power switch.)
OFF
X1
Z1
X2/Z2
RF
PGM
JOURNAL
FEED
3. While holding down <RECEIPT FEED>, turn on the register.
4. Release <RECEIPT FEED>.
You should see “FFFFFFFFFF” on the display.
If 10 Fs are not shown or another character are shown,
immediately set the mode switch to OFF and restart from
the beginning of this procedure.
RECEIPT
FEED
JOURNAL
FEED
5. Enter “8888888888” and press <CHECK TEND> to complete.
After completion, receipt is issued.
TK-3200 Dealer's Manual
19
NINS
Initialization
1. Plug the power cord into an AC outlet.
Initialization
Entering diag mode
1. Plug the power cord into an AC outlet.
REG2
REG1
2. Set the mode switch to PGM position and turn off the power switch.
(Refer page 13 of this manual for the location of the power switch.)
X1
Z1
OFF
X2/Z2
RF
PGM
3. While holding down <JOURNAL FEED>, turn on the register.
RECEIPT
FEED
4. Release <JOURNAL FEED>.
5. Enter “99990000” and press <SUBTOTAL> to enter the diagnosis.
RECEIPT
FEED
JOURNAL
FEED
Password
During initialize operation, you can program the password for PGM 3 ~ 7. If it is set, every time you enter PGM 3 ~ 7
mode, you must input this password by the following procedure.
1. Press <#-1> (normally <CASH/AMT TEND>).
2. Enter password.
3. Press <#-2> (normally <SUBTOTAL>).
Otherwise, you can do nothing in the PGM 3 ~ 7 mode.
20
NINS
Programming (General explanation)
Program sub mode (P1 thru P7 mode)
Programming
•
•
•
•
•
•
•
Program mode contains seven sub modes listed below. When you change the mode switch to PGM mode, the register is
always in the PGM 1 mode. In case of using other mode, enter the sub mode number (2 ~ 7) and press <SUBTOTAL>.
PGM1: unit price, rate, date, time, scanning PLU unit price maintenance
PGM2: descriptor, name, message
PGM3: machine feature (general function, clerk, etc.), key feature (department, transaction), scanning PLU maintenance
PGM4: key allocation
PGM5: file allocation
PGM6: program reading
PGM7: auto-program, system utility
Entering the program sub mode
Procedure (for PGM 1, 2 mode)
PGM
66 1s 6 a : : : : 6 s 6
PGM1
password (4-digit)
Mode switch
6 2s 6 a : : : : 6 s 6
PGM2
password (4-digit)
1. Enter password for PGM 1, 2 mode. If the register has no password for the PGM1 and 2 mode, you need not to enter it.
2. Press <SUBTOTAL>. An error occurs if you try to enter the PGM1 or 2 mode without inputting a password (when one is
programmed), or if the password you input does not match the one programmed for the register.
To avoid repetition, the above operation is abbreviated to the following for all of the other procedure in this manual.
This password is defined by the address code 02 of the general function program.
Procedure (for PGM 3 ~ 7 mode)
PGM
6 3 7s 6 a : : : : 6 s 6
Mode switch
PGM 3 ~ 7
password (4-digit)
1. Enter password for PGM 3 ~ 7 mode. If the register has no password for the PGM 3 ~ 7 mode, you need not to enter it.
2. Press <SUBTOTAL>. An error occurs if you try to enter the PGM 3 ~ 7 mode without inputting a password (when one is
programmed), or if the password you input does not match the one programmed for the register.
To avoid repetition, the above operation is abbreviated to the following for all of the other procedure in this manual.
This password is defined during initialization operation.
TK-3200 Dealer's Manual
21
NINS
Programming (General explanation)
22
NINS
File allocation (Program 5)
File allocation program
Programming procedure
PGM
6 5s 6 : : : s 6 :
: a 6s
Mode switch
File attribution code (see below.)
File attribution code
0
1
2
3
4
5
daily sales
✔
✔
✔
✔
✔
✔
TK-3200 Dealer's Manual
Periodic 1
Periodic 2
✔
✔
✔
✔
✔
✔
Program 5
File record number (see next pages.)
File number (see next pages.)
Consolidation file
Daily sales Periodic 1
Periodic 2
✔
✔
✔
✔
✔
✔
23
NINS
File allocation programming (P5)
File number list
File
No.
File description
System files
088
Auto-program work
089
Consecutive number work
091
Terminal connection table
093
Printer connection table
094
Start date
095
Initialize code
096
AT command
097
Online password
098
I/O parameter table
099
System error log
Function and total files
001
Fixed totalizer
--(periodic total 1)
--(periodic total 2)
--(daily consolidation)
--(periodic 1 consolidation)
--(periodic 2 consolidation)
002
Transaction key
--(periodic total 1)
--(periodic total 2)
--(daily consolidation)
--(periodic 1 consolidation)
--(periodic 2 consolidation)
004
PLU
--(periodic total 1)
--(periodic total 2)
--(daily consolidation)
--(periodic 1 consolidation)
--(periodic 2 consolidation)
005
Department
--(periodic total 1)
--(periodic total 2)
--(daily consolidation)
--(periodic 1 consolidation)
--(periodic 2 consolidation)
006
Group
--(periodic total 1)
--(periodic total 2)
--(daily consolidation)
--(periodic 1 consolidation)
--(periodic 2 consolidation)
009
Hourly sales
--(periodic total 1)
--(periodic total 2)
--(daily consolidation)
--(periodic 1 consolidation)
--(periodic 2 consolidation)
Record
length
Max No.
of records
52
6
12
5
4
7
62
8
8
11
1
1
32
7
1
1
2
1
3
99
Work
Work
Program
Program
Buffer
Program
Program
Program
Program
Buffer
No
No
Yes
Yes
No
No
Yes
Yes
No
Yes
1
1
32
3
1
1
2
1
3
99
22
10
10
10
10
10
35
10
10
10
10
10
77
30
30
30
30
30
63
25
25
25
25
25
22
10
10
10
10
10
24
20
20
20
20
20
99
99
99
99
99
99
999
999
999
999
999
999
5000
5000
5000
5000
5000
5000
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
Pgm/Sale
Sales
Sales
Sales
Sales
Sales
Pgm/Sale
Sales
Sales
Sales
Sales
Sales
Pgm/Sale
Sales
Sales
Sales
Sales
Sales
Pgm/Sale
Sales
Sales
Sales
Sales
Sales
Pgm/Sale
Sales
Sales
Sales
Sales
Sales
Pgm/Sale
Sales
Sales
Sales
Sales
Sales
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
99
99
99
0
0
0
30
30
30
0
0
0
300
0
0
0
0
0
30
30
30
0
0
0
10
10
10
0
0
0
24
0
0
0
0
0
Description
Attribution
Allocat- Default
able
Rec. No.
✍ Version 1.01
24
NINS
File description
Record
length
Max No.
of records
Description
010
Monthly sales
20
31
--(periodic total 1)
20
31
--(periodic total 2)
20
31
--(daily consolidation)
20
31
--(periodic 1 consolidation)
20
31
--(periodic 2 consolidation)
20
31
018
Table analysis
28
99
--(periodic total 1)
10
99
--(periodic total 2)
10
99
--(daily consolidation)
10
99
--(periodic 1 consolidation)
10
99
--(periodic 2 consolidation)
10
99
020
Grand total
20
3
--(daily consolidation)
8
3
Check files
015
Check index
255
200
056
Separate check buffer
100
1500
060
Check detail
100
9999
Clerk files
007
Clerk
38
99
030
Clerk detail link
9
200
011
Clerk detail
10
99 × 99
--(periodic total 1)
10
99 × 99
--(periodic total 2)
10
99 × 99
--(daily consolidation)
10
99 × 99
--(periodic 1 consolidation)
10
99 × 99
--(periodic 2 consolidation)
10
99 × 99
Time and attendance files
019
Time and attendance
16
999
061
Employee
17
99
Scanning PLU files
016
Scanning PLU
58
5000
040
Non PLU table
8
100
051
Mix & match table
30
99
--(periodic total 1)
10
99
--(periodic total 2)
10
99
--(daily consolidation)
10
99
--(periodic 1 consolidation)
10
99
--(periodic 2 consolidation)
10
99
070
Batch maintenance PLU
42
1000
071
Direct maintenance PLU
42
1000
076
Scanning PLU index
2
S-PLU + 2
077
One touch NLU table
7
999
Arrangement file
038
Arrangement table
11
9999
*A: Allocate if you select “check tracking pattern” initialization, (refer to page 22 of this manual).
*B: Allocate if you select “scanning pattern” initialization, (refer to page 22 of this manual).
Attribution
Allocat- Default
able
Rec. No.
Pgm/Sale
Sales
Sales
Sales
Sales
Sales
Pgm/Sale
Sales
Sales
Sales
Sales
Sales
Pgm/Sale
Sales
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
31
0
0
0
0
0
0
0
0
0
0
0
3
3
Buffer
Buffer
Buffer
Yes
Yes
Yes
(60)*A
(80)*A
(900)*A
Program
Program
Sales
Sales
Sales
Sales
Sales
Sales
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
15
10
150
150
150
0
0
0
Sales
Program
Yes
Yes
0
10
Pgm/Sale
Program
Pgm/Sale
Sales
Sales
Sales
Sales
Sales
Program
Program
Buffer
Program
Program
Program 5
File
No.
Yes
(<-)*B
Yes
(10)*B
Yes
10
Yes
10
Yes
10
Yes
0
Yes
0
Yes
0
Yes
(100)*B
Yes
(50)*B
Automatic (5002)*B
Yes
(10)*B
Yes
0
✍ Version 1.01
TK-3200 Dealer's Manual
25
NINS
File allocation programming (P5)
File
No.
File description
Record
length
Max No.
of records
Description
Program / message / buffer files
022
General control
5
37
023
Special character
16
82
024
Report header
12
27
025
Tax table
74
10
028
Set menu table
60
999
029
Batch X/Z
24
10
032
Receipt message
24
42
033
Check endorse message
40
4
034
Slip/remote printer message
40
42
035
Printer buffer (for remote printer)
46
1500
036
Registration buffer
100
1200
039
Character recall
40
999
041
Check print
3
9
046
Character key table
6
108
049
Print buffer (for local printer)
50
600
062
Scheduler
22
99
065
Order character
12
99
067
Graphic logo (for remote printer)
48
168
073
Bottle link table
4
999
074
Key table
24
150
078
Miscellaneous message
16
58
*C
079
Printing guidance message
24
87
*C
080
Error message
16
157
*C
081
Registration guidance message
16
22
*C
082
X/Z guidance message
16
72
*C
083
Program guidance message
16
115
*C
085
Help message
24
199
*C
086
Slip print buffer
40
500
*A: Allocate if you select “check tracking pattern” initialization, (refer to page 22 of this manual).
*B: Allocate if you select “scanning pattern” initialization, (refer to page 22 of this manual).
*C: Allocate these files if you want to change the default message.
Attribution
Program
Program
Program
Program
Program
Program
Program
Program
Program
Buffer
Buffer
Program
Program
Program
Buffer
Program
Program
Program
Program
Program
Program
Program
Program
Program
Program
Program
Program
Buffer
Allocat- Default
able
Rec. No.
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
✍ Version 1.01
26
NINS
37
82
27
4
(10)*A
4
4
0
0
0
80
0
0
108
0
0
0
0
0
150
0
0
0
0
0
0
0
0
Issuing program reading report of program 5 mode
Issuing procedure
PGM
6 5s 6 s
Mode switch
P05 ....................
— Program read symbol
FILE0001
22bytes
10bytes
FILE0002
35bytes
10bytes
— File name
— Sales file record length/No. of records of daily sales/periodic sales 1/periodic sales 2
— Consolidation file record length/No. of records of daily sales/periodic sales 1/periodic sales 2
99
99
99
99
99
99
100
100
---
---
RAM
TK-3200 Dealer's Manual
20,234
— Hyphen means no record.
— Remaining RAM capacity
27
NINS
Program 5
Report sample
File allocation programming (P5)
28
NINS
Key allocation (Program 4)
Key allocation program
Programming procedure
By pressing the appropriate key
See Menu sheet No. section
6 4s6
PGM
:000s6
Menu sheet number
Mode switch
6:~
:
Program 4
to other key
This step can be
skipped for
transaction key.
Set the same function
6
:::6
#-nn
6s
Appropriate key
• Record No. (department/transaction) • Function code
• Random code or record No. (flat-PLU)
(white key on the next page)
By entering physical key code
See Menu sheet No. section
:
6 4s 6
PGM
Mode switch
: : :s 6
6
Menu sheet number
This step can be
skipped for
transaction key.
6:~
:
Physical key code
(see the next page.)
to other key
6
:::
6a 6s
• Record No. (department/transaction) • Function code
• Random code or record No. (flat-PLU)
Menu sheet number
Menu sheet
number
0 or skip entering
1
2
3
4
5
6
Description
(for transaction key)
Set a function to the 1st ~ 6th menu sheets.
Set a function to the 1st menu sheet.
Set a function to the 2nd menu sheet.
Set a function to the 3rd menu sheet.
Description
(for Dept/flat-PLU)
Set a function to the programmed menu sheet.
Set a function to the 1st menu sheet.
Set a function to the 2nd menu sheet.
Set a function to the 3rd menu sheet.
Set a function to the 4th menu sheet.
Set a function to the 5th menu sheet.
Set a function to the 6th menu sheet.
Set a function to the 4th menu sheet.
Set a function to the 5th menu sheet.
Set a function to the 6th menu sheet.
TK-3200 Dealer's Manual
29
NINS
Key allocation programming (P4)
Configuration of the physical key layout
RECEIPT
FEED
042
JOURNAL
FEED
035
030
021
039
034
029
020
051
060
069
078
087
096
105
114
123
132
141
150
050
059
070
077
086
095
104
113
122
131
140
149
049
058
067
076
085
094
103
112
121
130
139
148
041
038
033
028
019
040
037
032
027
018
048
057
066
075
084
093
102
111
120
129
138
147
C
036
031
026
017
047
056
065
074
083
092
101
110
119
128
137
146
7
8
9
025
016
046
055
064
073
082
091
100
109
118
127
136
145
4
5
6
024
015
045
054
063
072
081
090
099
108
117
126
135
144
044
053
062
071
080
089
098
107
116
125
134
143
1
2
3
014
023
043
052
061
070
079
088
097
106
115
124
133
142
0
011
012
013
022
The shadowed key cannot be programmed with any other functions.
<00>, <000>, and <.> functions are only allocated to <#011> or <#012> keys.
30
NINS
Function
Add check
Arrangement
Birth date
Bill copy
Bottle return
Cancel
Cash amount tendered
Charge
Check endorsement
Check print
Check tender
Clerk number
Clock-in/out
Coupon
Coupon 2
Credit
Cube
Currency exchange
Customer number
Date/Time
Decimal point
Declaration
Department
Deposit
Discount
Eat-in
Enter
Error correct
Flat PLU *
Help
Ketten Bon
Loan
Lock out unused key
Manual tax
Media change
Menu shift
Merchandise subtotal
Minus
Multiplication/Date/Time
Multiplication
New balance
New check
New/old check
No sale
Non-add
Non-add/No sale
Normal receipt
OBR
Code
094
044
Initial character
ADD CHK
ARG
047
053
236
001
002
039
012
003
072
108
023
036
004
090
045
043
101
098
061
nn051
025
028
128
105
034
nnnn063
141
113
019
000
032
118
064
080
027
082
100
006
091
093
042
040
041
016
103
BILL
BR
CANCEL
CASH
CHARGE
CK.E
CHKP
CHECK
CLK#
CLOCK-IN/OUT
COUPON
CPN2
CREDIT
XXX
CE
CT
DATE/TIME
.
DECLA
DEPTnn
DEPOSIT
%–
EAT-IN
ENT
CORR
PLUnnnn
HELP
X/KETTEN
LOAN
TK-3200 Dealer's Manual
TAX
MEDIA CHG
MENU
MDST
X
X
NB
NEW CHK
NEW/OLD
NS
#
#/NS
NRMRCT
OBR
Function
Old check
One touch NLU
Open
Open2
Open check
Operator read/reset
Paid out
Pick up
Plus
PLU
Previous balance
Previous balance subtotal
Premium
Price
Price change
Price inquiry
Price shift
Quantity/for
Rate tax
Recall
Receipt
Receipt on/off
Received on account
Red price
Refund
Review
Separate check
Slip back feed/release
Slip feed/release
Slip print
Square
Stock inquiry
Store
Subtotal
Table number
Takeout
Tax exempt
Tax status shift
Taxable amount subtotal
Text print
Text recall
Three zero
Tip
Tray total
Two zero
Validation
VAT
Void
Code
092
138
067
068
117
073
021
022
029
048
026
079
030
049
104
008
069
083
031
131
038
076
020
060
033
071
095
054
056
055
084
009
130
075
058
129
062
057
077
011
010
097
015
074
096
037
046
035
Initial character
OLD CHK
NLU
OPEN
OPEN2
OPEN CHK
OPE X/Z
PD
P.UP
+
PLU#
PB
PBST
%+
PRC
PRC CHG
PRCINQ
PRICE SHIFT
QT
TAX
RECALL
RCT
RCT ON/OFF
RC
RED
RF
REVIEW
SEP CHK
SB/R
SF/R
SLIP
XX
STKINQ
STORE
SUBTOTAL
TBL#
TAKE-OUT
EXEMPT
T/S
TAST
PRT
CHAR
000
TIP
TRAY TL
00
VLD
VAT
VOID
31
NINS
Program 4
Function code list
Key allocation programming (P4)
Issuing program reading report of program 4 mode
Issuing procedure
PGM
64s 6 s
Mode switch
Report sample
P04 ....................
1 ----------------------00
0015-02
011-096
.
0009-02
012-098
CASH
0004-02
013-001
32
NINS
— Program read symbol
— Function character/rec-#/file-#
— Hard key code/function code
Key function/machine feature (Program 3)
General control program
Programming procedure
PGM
6 3s 6 : : 22s6 : : ~ : : a 6 s
Mode switch
Program data
(Max. 10 digits)
Address code
(2 digits)
Program data (by address code)
Address code 01 (date order/password)
Choice
Significant
number (0 ~ 3)
Monetary mode
0 = 0, ~0 = 1, ~00 = 2, ~000 = 3
Significant
number (0 ~ 3)
Program code
:
Initial value
D10
Dependent upon
initialization code
:
Dependent upon
initialization code
Password in Manager mode
::::
;;;;
Password in X2/Z2 mode
::::
;;;;
Program code
Initial value
::::
;;;;
;;
;;
;;;;
;;;;
Program code
Initial value
:
;
;
;
D9
D8 D7 D6 D5
D4 D3 D2 D1
D8 D7 D6 D5
D4 D3 D2 D1
Address code 02 (password)
Description
Choice
Significant
numbers
Password in PGM1/PGM2 mode
Always “00”
D10 D9 D8 D7
D6 D5
Always “0000”
D4 D3 D2 D1
D10 D9 D8 D7
D6 D5
D4 D3 D2 D1
Address code 03 (consecutive number)
Description
Reset consecutive number after daily fixed total reset report is issued.
Always “0”
Consecutive number set value.
It starts “set value + 1.”
TK-3200 Dealer's Manual
Choice
Yes = 1
No = 0
D8
D7
D8
D7
:::::: ;;;;;;
D6 D5 D4 D3 D2 D1 D6 D5 D4 D3 D2 D1
33
NINS
Program 3
Description
Date order
Year/Month/Day = 0, 1
Day/Month/Year = 2, Month/Day/Year = 3
Key function/machine feature (P3)
Address code 04 (tax system, rounding, etc.)
Description
Choice
Apply rounding for registration.
No rounding = 0, IF1 = 1, IF2 = 2, Danish = 3, Norwegian = 4,
Singaporean = 5, Finnish = 6, Australian = 7, South Africa = 8
Significant
number (0 ~ 8)
Tax system
Significant
number (0, 3)
Single tax system (1 ~ 10) = 0,
Singaporean tax system = 3
Receipt issuance:
Allow amount tender in RF/REG– mode operation.
a
Cash drawer opening:
b
1Immediately when the transaction is finalized.
2After validation compulsory is released.
Initial value
:
;
:
;
D9
D9
:
;
D10
Significant
number (0 ~ 2)
Controlled by receipt on/off switch/key = 0
Always on (issue) = 1, Always off (not issue) = 2
Program code
D8
Yes = 0
No = 2
:
1=0
2=4
Always “0”
High amount limit specification for cash in drawer amount.
(Sentinel function)
Significant
number (0 ~ 9)
;
;
:
;
::
;;
;;
;;
D4 D3
Maximum value
(0 ~ 9)
Number of zeros
(0 ~ 9)
Always “00”
D2 D1
Rounding
IF 1 rounding
Last 1 digit of subtotal
0~2
3~7
8~9
Result
0
5
10
IF 2 rounding
Last 1 digit of subtotal
0~4
5~9
Result
0
10
Singaporean rounding
Last 1 digit of
Result
item, %+, %- registration
0~2
0
3~7
5
8~9
10
Danish rounding
Last 1 digit of
subtotal/change
00 ~ 12
13 ~ 37
38 ~ 62
63 ~ 87
88 ~ 99
34
NINS
Result
00
25
50
75
100
Australian rounding
Last 1 digit of
Result
subtotal/cash change
0~2
0
3~7
5
8~9
10
Norwegian rounding
Last 1 digit of
Result
subtotal
00 ~ 24
0
25 ~ 74
50
75 ~ 99
100
Finnish rounding
Last 1 digit of
subtotal/cash change
0~2
3~7
8~9
Result
0
5
10
South Africa rounding
Last 1 digit of subtotal
Result
0~4
0
5~9
5
;
(a+b)
D7
D5
Round off = 0
Cut off = 1
Round up = 2
D8
(a+b)
D7
D6
Rounding of results produced by departments, PLUs and scanning PLUs
programmed with package prices and package quantities
D10
D6
D5
D4 D3
D2 D1
Address code 05 (print control for receipt)
Choice
Print total line during finalization.
a
Yes = 0
No = 1
Time system:
1 24 hour system, 2 12 hour system
b
1=0
2=2
Feed one line after issuing receipt.
c
No = 0
Yes = 4
Print consecutive number by double sized letter (up to 3 digits).
a
No = 0
Yes = 1
b
No = 0
Yes = 2
a
No = 0
Yes = 1
Buffered receipt print
*1
Skip item lines on journal. (journal skip)
Breakdown set menu printing on receipt, post receipt, guest receipt.
b
No = 0
Yes = 4
Always “000”
Print number of item sold.
Print tax symbols.
Program code
:
(a+b+c)
D10
:
(a+b)
D9
:
a
b
Yes = 0
No = 2
Ignore receipt/journal paper end (not effective for external printer).
Yes = 0
No = 1
Print multiplication or item consolidation in one line.
Yes = 0
No = 4
Print C operation.
a
No = 0
Yes = 1
Print number of customers on header.
b
Yes = 0
No = 2
Print PLU number on receipt.
c
No = 0
Yes = 4
;
(a+b+c)
D10
;
(a+b)
D9
;
(a+b)
D8
(a+b)
D8
;;;
;;;
D7 D6 D6
No = 0
Yes = 1
Initial value
:
D7 D6 D5
S
(a+b)
D4
(a+b)
D4
:
;
:
;
D3
D2
:
(a+b+c)
D1
Program 3
Description
D3
D2
;
(a+b+c)
D1
*1: Select “Yes” if you want to print receipts with watermarks.
TK-3200 Dealer's Manual
35
NINS
Key function/machine feature (P3)
Address code 06 (calculation & operation control)
Description
a
Yes = 0
No = 1
Force to register rate tax before finalization.
b
No = 0
Yes = 2
Force a money declaration by b, n, N before read/reset operation.
c
No = 0
Yes = 4
Force to press s before finalization
a
No = 0
Yes = 1
Allow credit balance while finalization.
b
Yes = 0
No = 2
Allow multiple refund/register minus operation.
c
Yes = 0
No = 4
Affect the result of +/-, %+/%-, mix & match to the item. (Net totalling)
a
No = 0
Yes = 1
Include add-on/add-in tax in net total
b
Yes = 0
No = 2
Include commission in net total.
a
Yes = 0
No = 2
1 Treat as amount override
2 Treat as quantity extensions
b
1=0
2=4
Clear the key buffer when a receipt is issued. (REG1/2 only)
a
No = 0
Yes = 1
Sounds key catch tone.
b
Yes = 0
No = 2
Allow to issue post receipt, even if the original one is issued.
c
No = 0
Yes = 4
Allow program 1 programming in the manager control mode
(X1 mode).
a
No = 0
Yes = 1
Display “seconds” during time display.
b
No = 0
Yes = 2
Connect slit drawer.
c
No = 0
Yes = 4
RF mode status
a
RF = 0
REG– = 1
Prohibit registration when the stock quantity becomes negative.
b
No = 0
Yes = 2
Alert when the stock quantity becomes under minimum stock quantity.
c
No = 0
Yes = 4
Affect to stock quantity even if the refund operation.
a
No = 0
Yes = 1
1 Treat as amount override (effective for flat-PLU only)
2 Treat as quantity extensions
b
1=0
2=2
Allow one registration of +/-, %+/%- per one transaction.
c
No = 0
Yes = 4
Rounding on the least significant digit of %+/%- registration:
0 ~ 2 → 0, 3 ~ 7 → 5, 8 ~ 9 → 10
a
No = 0
Yes = 1
Display separator.
b
Yes = 0
No = 2
Allow numeric entry while compulsory drawer opening.
a
Yes = 0
No = 2
PLU numbering: 1 By memory No. (sequential), 2 By random code
b
1=0
2=4
Treatment of department key numeric inputs:
Treatment of flat-PLU/One touch NLU key numeric inputs:
36
NINS
Choice
Follow the taxable status and commission status of previous item when +/operation is performed.
Program code
:
(a+b+c)
D10
:
(a+b+c)
D9
:
(a+b)
D8
:
(a+b)
D7
:
(a+b+c)
D6
:
(a+b+c)
D5
:
(a+b+c)
D4
:
(a+b+c)
D3
:
(a+b)
D2
:
(a+b)
D1
Initial value
;
(a+b+c)
D10
;
(a+b+c)
D9
;
(a+b)
D8
;
(a+b)
D7
;
(a+b+c)
D6
;
(a+b+c)
D5
;
(a+b+c)
D4
;
(a+b+c)
D3
;
(a+b)
D2
;
(a+b)
D1
Address code 07 (menu & price shift)
1 Do not maintain
2 Until next menu shift specification
3 Within this transaction
Maintenance of last price shift:
1 Do not maintain
2 Until next price shift specification
3 Within this transaction
Choice
Program code
Initial value
1=0
2=1
3=2
:
;
1=0
2=1
3=2
:
;
;
;
:
;
Always “0”
Significant
number (1 ~ 6)
Summed up menu sheet 1 to parent menu sheet.
a
No = 0
Yes = 1
Summed up menu sheet 2 to parent menu sheet.
b
No = 0
Yes = 2
Summed up menu sheet 3 to parent menu sheet.
c
No = 0
Yes = 4
Summed up menu sheet 4 to parent menu sheet.
a
No = 0
Yes = 1
Summed up menu sheet 5 to parent menu sheet.
b
No = 0
Yes = 2
c
No = 0
Yes = 4
Always “0”
Reset child menu sheets with parent menu sheet together.
TK-3200 Dealer's Manual
D7
D6
Sheet number of the parent menu sheet
Summed up menu sheet 6 to parent menu sheet.
D8
D5
:
(a+b+c)
D4
:
D7
D6
D5
;
(a+b+c)
D4
;
(a+b+c)
D3
(a+b+c)
D3
;
;
:
;
D2
Yes = 0
No = 1
D8
D1
Program 3
Description
Maintenance of last menu shift:
D2
D1
37
NINS
Key function/machine feature (P3)
Address code 08 (print control for fixed total report)
Description
38
NINS
Choice
Print gross sales total on fixed total report (GROSS)
a
Yes = 0
No = 1
Print net sales total on fixed total report (NET)
b
Yes = 0
No = 2
Print cash in drawer total on fixed total report (CAID)
c
Yes = 0
No = 4
Print difference between money declaration and cash in drawer total on fixed
total report (CATL, CA+, CA-) (Skip these lines, if “CAID” is set to skip.)
a
Yes = 0
No = 1
Print charge in drawer total on fixed total report (CHID)
b
Yes = 0
No = 2
Print difference between money declaration and charge in drawer total on
fixed total report (CHTL, CH+, CH-) (Skip these lines, if “CHID” is set to
skip.)
c
Yes = 0
No = 4
Print check in drawer total on fixed total report (CKID)
a
Yes = 0
No = 1
Print difference between money declaration and check in drawer total on
fixed total report (CKTL, CK+, CK-) (Skip these lines, if “CKID” is set to
skip.)
b
Yes = 0
No = 2
Print credit in drawer total on fixed total report (CRID(1) ~ (4))
c
Yes = 0
No = 4
Print difference between money declaration and credit in drawer total on
fixed total report (CRTL, CR+, CR-) (Skip these lines, if “CRID” is set to
skip.)
a
Yes = 0
No = 1
Not used
b
(Always “2”
Not used
c
(Always “4”)
Not used
a
(Always “1”)
Not used
b
(Always “2”)
Print RF mode total on fixed total report (RF)
c
Yes = 0
No = 4
Print the net number of customers on fixed total report (CUST)
a
Yes = 0
No = 1
Print the average sales per customer on fixed total report (AVER)
b
Yes = 0
No = 2
Print check cashing handling fee total on fixed total report (FEE)
a
Yes = 0
No = 1
Print temporary finalize service charge total on fixed total report (+)
b
Yes = 0
No = 2
Not used
c
(Always “4”)
Print commission 1 total on fixed total report (C-1)
a
Yes = 0
No = 1
Print commission 2 total on fixed total report (C-2)
b
Yes = 0
No = 2
Print foreign currency cash in drawer and check in drawer totals on fixed
total report (CECA1 ~ 4, CECK1 ~ 4)
c
Yes = 0
No = 4
Print <MINUS>, <COUPON>, <%–> and mix & match operation net total
on fixed total report (DC)
a
Yes = 0
No = 1
Print <REFUND> and <VOID> operation net total on fixed total report
(REF)
b
Yes = 0
No = 2
Print total number of <CLEAR> operation net total on fixed total report
(CLEAR)
c
Yes = 0
No = 4
Print nontaxable totals on fixed total report (NON TAX)
a
Yes = 0
No = 1
Print rounding totals on fixed total report (ROUND)
b
Yes = 0
No = 2
Print cancellation total on fixed total report (CANCEL)
c
Yes = 0
No = 4
Program code
:
(a+b+c)
D10
:
(a+b+c)
D9
:
(a+b+c)
D8
:
(a+b+c)
D7
:
(a+b+c)
D6
:
(a+b)
D5
:
(a+b+c)
D4
:
(a+b+c)
D3
:
(a+b+c)
D2
:
(a+b+c)
D1
Initial value
;
(a+b+c)
D10
G
(a+b+c)
D9
S
(a+b+c)
D8
J
(a+b+c)
D7
D
(a+b+c)
D6
S
(a+b)
D5
J
(a+b+c)
D4
J
(a+b+c)
D3
J
(a+b+c)
D2
A (Australia)
or
D (other area)
D1
Address code 09 (print control for fixed total report)
Choice
a
Yes = 0
No = 1
Print tax 1 total on fixed total report (TX1)
b
Yes = 0
No = 2
Print tax exempt 1 total on fixed total report (EX1)
c
Yes = 0
No = 4
Print taxable amount 2 total on fixed total report (TA2)
a
Yes = 0
No = 1
Print tax 2 total on fixed total report (TX2)
b
Yes = 0
No = 2
Print tax exempt 2 total on fixed total report (EX2)
c
Yes = 0
No = 4
Print taxable amount 3 total on fixed total report (TA3)
a
Yes = 0
No = 1
Print tax 3 total on fixed total report (TX3)
b
Yes = 0
No = 2
Print tax exempt 3 total on fixed total report (EX3)
c
Yes = 0
No = 4
Print taxable amount 4 total on fixed total report (TA4)
a
Yes = 0
No = 1
Print tax 4 total on fixed total report (TX4)
b
Yes = 0
No = 2
Print tax exempt 4 total on fixed total report (EX4)
c
Yes = 0
No = 4
Print taxable amount 5 total on fixed total report (TA5)
a
Yes = 0
No = 1
Print tax 5 total on fixed total report (TX5)
b
Yes = 0
No = 2
Print tax exempt 5 total on fixed total report (EX5)
c
Yes = 0
No = 4
Print taxable amount 6 total on fixed total report (TA6)
a
Yes = 0
No = 1
Print tax 6 total on fixed total report (TX6)
b
Yes = 0
No = 2
Print tax exempt 6 total on fixed total report (EX6)
c
Yes = 0
No = 4
Print taxable amount 7 total on fixed total report (TA7)
a
Yes = 0
No = 1
Print tax 7 total on fixed total report (TX7)
b
Yes = 0
No = 2
Print tax exempt 7 total on fixed total report (EX7)
c
Yes = 0
No = 4
Print taxable amount 8 total on fixed total report (TA8)
a
Yes = 0
No = 1
Print tax 8 total on fixed total report (TX8)
b
Yes = 0
No = 2
Print tax exempt 8 total on fixed total report (EX8)
c
Yes = 0
No = 4
Print taxable amount 9 total on fixed total report (TA9)
a
Yes = 0
No = 1
Print tax 9 total on fixed total report (TX9)
b
Yes = 0
No = 2
Print tax exempt 9 total on fixed total report (EX9)
c
Yes = 0
No = 4
Print taxable amount 10 total on fixed total report (TA10)
a
Yes = 0
No = 1
Print tax 10 total on fixed total report (TX10)
b
Yes = 0
No = 2
Print tax exempt 10 total on fixed total report (EX10)
TK-3200 Dealer's Manual
c
Yes = 0
No = 4
Program code
:
(a+b+c)
D10
:
(a+b+c)
D9
:
(a+b+c)
D8
:
(a+b+c)
D7
:
(a+b+c)
D6
:
(a+b+c)
D5
:
(a+b+c)
D4
:
(a+b+c)
D3
:
(a+b+c)
D2
:
(a+b+c)
D1
Initial value
F
(a+b+c)
D10
J (Australia)
or
F (other area)
D9
J
(a+b+c)
D8
Program 3
Description
Print taxable amount 1 total on fixed total report (TA1)
J
(a+b+c)
D7
J
(a+b+c)
D6
J
(a+b+c)
D5
J
(a+b+c)
D4
J
(a+b+c)
D3
J
(a+b+c)
D2
J
(a+b+c)
D1
39
NINS
Key function/machine feature (P3)
Address code 10 (print control for taxable amount, till timer)
Description
Choice
Print taxable amount 1 on receipt/journal.
a
Yes = 0
No = 1
Print taxable amount 2 on receipt/journal.
b
Yes = 0
No = 2
Print taxable amount 3 on receipt/journal.
c
Yes = 0
No = 4
Print taxable amount 4 on receipt/journal.
a
Yes = 0
No = 1
Print taxable amount 5 on receipt/journal.
b
Yes = 0
No = 2
Print taxable amount 6 on receipt/journal.
c
Yes = 0
No = 4
Print taxable amount 7 on receipt/journal.
a
Yes = 0
No = 1
Print taxable amount 8 on receipt/journal.
b
Yes = 0
No = 2
Print taxable amount 9 on receipt/journal.
c
Yes = 0
No = 4
Yes = 0
No = 1
Print taxable amount 10 on receipt/journal.
Always “0”
Prohibit registrations,
1 while all drawers are opened. 2 while clerk’s own drawer is opened.
Ignore compulsory drawer sensor.
40
NINS
Program code
:
(a+b+c)
D10
:
(a+b+c)
D9
:
1=0
2=1
b
No = 0
Yes = 2
Till timer (00 ~ 59 minutes)
Significant
numbers
Till timer (00 ~ 59 seconds)
Significant
numbers
;
(a+b+c)
D10
;
(a+b+c)
D9
;
(a+b+c)
D8
(a+b+c)
D8
:
;
;
;
D7
D6
a
Initial value
:
D7
D6
;
(a+b)
D5
(a+b)
D5
::
;;
D4 D3
::
D2 D1
D4 D3
;;
D2 D1
Address code 13 (online control)
Description
Issue reset report at satellites during Z consolidation. *
(for online master/satellite)
Add daily total data to consolidation file when reset operation has been
performed.
Choice
a
No = 0
Yes = 2
b
Yes = 0
No = 4
No = 0
Yes = 1
Limit operation when data exists in the consolidation file.
Program code
:
;
(a+b)
D5
(a+b)
D5
:
;
D4
;;;
Always “000”
Initial value
D3 D2 D1
D4
;;;
D3 D2 D1
* This option is also effective, when consolidation is activated by job command.
Description
Choice
Significant
number (0 ~ 9)
Monetary mode of CECA1 and CECK1 in fixed total report:
Decimal for CECA1 and CECK1 in fixed total report:
1 Period = 0, 2 Comma = 1
Separator for CECA1 and CECK1 in fixed total report:
1 Comma = 0, 2 Period = 1
a
b
Separator for CECA2 and CECK2 in fixed total report:
1 Comma = 0, 2 Period = 1
a
1=0
2=1
b
1=0
2=4
Significant
number (0 ~ 9)
Monetary mode of CECA3 and CECK3 in fixed total report:
Decimal for CECA3 and CECK3 in fixed total report:
1 Period = 0, 2 Comma = 1
Separator for CECA3 and CECK3 in fixed total report:
1 Comma = 0, 2 Period = 1
a
b
Separator for CECA4 and CECK4 in fixed total report:
1 Comma = 0, 2 Period = 1
TK-3200 Dealer's Manual
1=0
2=1
1=0
2=4
Significant
number (0 ~ 9)
Monetary mode of CECA4 and CECK4 in fixed total report:
Decimal for CECA4 and CECK4 in fixed total report:
1 Period = 0, 2 Comma = 1
1=0
2=4
Significant
number (0 ~ 9)
Monetary mode of CECA2 and CECK2 in fixed total report:
Decimal for CECA2 and CECK2 in fixed total report:
1 Period = 0, 2 Comma = 1
1=0
2=1
a
b
1=0
2=1
1=0
2=4
Program code
:
D8
:
Initial value
;
D8
;
(a+b)
D7
(a+b)
D7
:
;
D6
:
D6
;
(a+b)
D5
(a+b)
D5
:
;
D4
:
D4
;
(a+b)
D3
(a+b)
D3
:
;
D2
:
(a+b)
D1
Program 3
Address code 14 (currency exchange control)
D2
;
(a+b)
D1
41
NINS
Key function/machine feature (P3)
Address code 15 (print control for reports)
Description
Zero skip department report.
NINS
a
Yes = 0
No = 1
Zero skip clerk report.
b
Yes = 0
No = 2
Zero skip transaction report.
a
Yes = 0
No = 1
Zero skip PLU report.
b
Yes = 0
No = 2
Zero skip hourly report.
c
Yes = 0
No = 4
Zero skip group report.
a
Yes = 0
No = 1
Zero skip monthly report.
b
Yes = 0
No = 2
Zero skip table analysis report.
c
Yes = 0
No = 4
Skip a not clocked out employee on the time & attendance report.
a
Yes = 0
No = 2
Zero skip mix & match report.
b
Yes = 0
No = 4
Prohibit issuing “OPEN CHECK Z” report.
a
No = 0
Yes = 1
Prohibit issuing “Daily Z” report, if opened check exists.
b
No = 0
Yes = 2
Skip the non-programmed record of scanning PLU saving data to CF card
c
Yes = 0
No = 4
Exclude the record No. field from scanning PLU saving data to CF card
a
Yes = 0
No = 1
Open cash drawer when the financial or fixed total report is issued.
b
Yes = 0
No = 2
Print PLU number on the PLU report.
c
No = 0
Yes = 4
Print sales ratio.
a
No = 0
Yes = 1
Issue double Z report.
b
No = 0
Yes = 2
Print the recalculate amount of taxable amount and tax amount of single tax.
c
No = 0
Yes = 4
Print average sales in the monthly report.
a
Yes = 0
No = 1
1: Fixed total report only, 2: Batch report *
* Fixed total should be included in this batch.
b
1=0
2=2
Reset actual stock quantity after PLU reset report issuance by batch X/Z.
c
No = 0
Yes = 4
Print reset counter.
a
Yes = 0
No = 1
Print item discount totalizer.
b
No = 0
Yes = 2
Print order of PLU report:
1 Memory No. (sequential), 2 = Random code
c
1=0
2=4
With character of X/Z data stored to CF card
a
No = 0
Yes = 1
With random code of X/Z data stored to CF card
b
No = 0
Yes = 2
With OBR code of X/Z data stored to CF card
c
No = 0
Yes = 4
Contents of double Z report:
42
Choice
Program code
:
(a+b)
D10
:
(a+b+c)
D9
:
(a+b+c)
D8
:
(a+b)
D7
:
(a+b)
D6
:
(a+b)
D5
:
(a+b+c)
D4
:
(a+b+c)
D3
:
(a+b+c)
D2
:
(a+b+c)
D1
Initial value
;
(a+b)
D10
;
(a+b+c)
D9
;
(a+b+c)
D8
;
(a+b)
D7
;
(a+b)
D6
;
(a+b)
D5
;
(a+b+c)
D4
;
(a+b+c)
D3
;
(a+b+c)
D2
;
(a+b+c)
D1
Address code 16 (print control for grand total)
Choice
Program code
Initial value
Significant
number (0 ~ 2)
:
;
:
;
Significant
number (0 ~ 2)
Journal printing of the periodic 1 report
a
Yes = 0
No = 1
Journal printing of the periodic 2 report
b
Yes = 0
No = 2
No = 0
Yes = 1
Print consecutive number range of the day on daily fixed total report.
Always “0000”
D9
:
Print grand total 1 on periodic 1/periodic 2 reset report.
a
Print grand total 2 on periodic 1/periodic 2 reset report.
b
Yes = 0
No = 2
Print grand total 3 on periodic 1/periodic 2 reset report.
c
Yes = 0
No = 4
Print grand total 1 on daily sales reset report.
a
Yes = 0
No = 1
Print grand total 2 on daily sales reset report.
b
Yes = 0
No = 2
Print grand total 3 on daily sales reset report.
c
Yes = 0
No = 4
D10
D9
;
(a+b)
D8
(a+b)
D8
:
;
;;;;
;;;;
D7
D6 D5 D4 D3
Yes = 0
No = 1
TK-3200 Dealer's Manual
D10
:
(a+b+c)
D2
:
(a+b+c)
D1
D7
D6 D5 D4 D3
J
Program 3
Description
Contents of the periodic 1 total:
• Normal registration only = 0
• Training registration only = 1
• Both normal registration and training registration = 2
Contents of the periodic 2 total:
• Normal registration only = 0
• Training registration only = 1
• Both normal registration and training registration = 2
(a+b+c)
D2
;
(a+b+c)
D1
43
NINS
Key function/machine feature (P3)
Address code 17 (print control)
Description
Choice
Money declaration compulsory (cash) in REG/RF mode
a
No = 0
Yes = 1
Money declaration compulsory (charge) in REG/RF mode
b
No = 0
Yes = 2
Money declaration compulsory (check) in REG/RF mode
c
No = 0
Yes = 4
No = 0
Yes = 1
Money declaration compulsory (credit) in REG/RF mode
Always “0”
Commission:
1 Taxable amount × commission rate
2 (Taxable amount + VAT) × commission rate
Whenever pressing <PLUS>, <MINUS>, or <COUPON> the amount
registered is proportioned among all taxable amounts.
a
1=0
2=1
b
No = 0
Yes = 2
44
NINS
Significant
number (0 ~ 2)
a
No = 0
Yes = 1
Print normal price and the difference between the normal price and the
reduced price on receipt.
b
No = 0
Yes = 2
Print date on receipt.
a
Yes = 0
No = 1
Print date on journal.
b
Yes = 0
No = 2
Print consecutive number on receipt/journal.
c
Yes = 0
No = 4
Print time on receipt.
a
Yes = 0
No = 1
Print time on journal.
b
Yes = 0
No = 2
Merge the same department/PLU/scanning PLU registration on buffered
receipt and post receipt. (Item consolidation)
c
No = 0
Yes = 4
Always “00”
:
Initial value
;
(a+b+c)
D10
(a+b+c)
D10
:
;
;
;
D9
D8
Rounding of commission:
Round off = 0, Cut off = 1, Round up = 2
Append two zeros in unit price programming.
Program code
:
D9
D8
;
(a+b)
D7
(a+b)
D7
:
;
D6
:
(a+b)
D5
:
(a+b+c)
D4
:
D6
;
(a+b)
D5
;
(a+b+c)
D4
;
(a+b+c)
D3
(a+b+c)
D3
;;
;;
D2 D1
D2 D1
Address code 18 (print control for guest receipt and slip)
Choice
Significant
numbers
Maximum printing lines of slip (00 ~ 99)
Slip printing speed:
“Maximum printing lines of slip” is necessary, if you select “High”.
Classify registered item by group on slip & guest receipt.
a
Low = 0
High = 2
b
No = 0
Yes = 4
Always “0”
Program code
::
D8 D7
:
Print date on slip & guest receipt.
a
Print time on slip & guest receipt.
b
Yes = 0
No = 2
Print:
1 Total only, 2 Detail when D6 = 4 (item consolidated)
c
1=0
2=4
Slip print range:
1 At the top of the transaction, 2 This receipt
a
1=0
2=1
Enable slip auto line find.
b
No = 0
Yes = 2
Merge the same department/PLU/scanning PLU registration on slip & guest
receipt. (Item consolidation)
c
No = 0
Yes = 4
Significant
numbers
Slip auto feed lines (00 ~ 99)
;;
D8 D7
;
(a+b)
D6
(a+b)
D6
;
;
D5
Yes = 0
No = 1
Initial value
:
(a+b+c)
D4
:
D5
;
(a+b+c)
D4
;
(a+b+c)
D3
(a+b+c)
D3
::
;;
D2 D1
Program 3
Description
D2 D1
Address code 19 (order control)
Description
Choice
Print order with order character.
a
No = 0
Yes = 1
Print order with amount.
b
No = 0
Yes = 2
Alert when the order printer 1 goes down.
If “No”, backup processing is performed.)
a
Yes = 0
No = 1
Alert when the order printer 2 goes down.
(If “No”, backup processing is performed.)
b
Yes = 0
No = 2
Breakdown set menu printing on order.
c
No = 0
Yes = 4
Print double-height characters in UP-360/(internal R/J printer).
(not only for order, but also effective for receipt)
No = 0
Yes = 1
Show guidance for backup print of order. (when it is backed up from R/J)
No = 0
Yes = 1
Always “0”
Program code
:
(a+b)
D9
:
a
No = 0
Yes = 2
Print dashed lines (hyphens).
b
No = 0
Yes = 4
Print orders even if training clerk is registered items.
a
No = 0
Yes = 2
Merge the same department/PLU/scanning PLU registration on order receipt. b
(Item consolidation)
No = 0
Yes = 4
Number of feed lines before order printing (0 ~ 9)
Number of feed lines after order printing (0 ~ 9)
TK-3200 Dealer's Manual
Significant
number
Significant
number
;
(a+b)
D9
;
(a+b+c)
D8
(a+b+c)
D8
:
;
:
;
;
;
D7
D6
D5
Cut order.
Initial value
:
(a+b)
D4
:
D7
D6
D5
;
(a+b)
D4
;
(a+b)
D3
(a+b)
D3
:
;
:
F
D2
D1
D2
D1
45
NINS
Key function/machine feature (P3)
Address code 21 (message control)
Description
Print logo message on receipt. (If select “No”, logo stamp is used.)
Choice
Program code
No = 0
Yes = 1
D10
Print commercial message on slip/guest receipt.
a
No = 0
Yes = 1
Print bottom message on slip/guest receipt.
b
No = 0
Yes = 2
Print intermediate message on slip/guest receipt.
c
No = 0
Yes = 4
Print bill top message.
a
No = 0
Yes = 1
Print bill copy message.
b
No = 0
Yes = 2
Print bill bottom message.
c
No = 0
Yes = 4
Always “0”
:
(a+b+c)
D9
:
a
No = 0
Yes = 1
Print bottom message on receipts in REG/RF mode.
b
No = 0
Yes = 2
Print commercial message on journal in REG/RF mode.
c
No = 0
Yes = 4
Print bottom message on journal in REG/RF mode.
a
No = 0
Yes = 1
Print commercial message on receipts in X/Z mode.
b
No = 0
Yes = 2
Print bottom message on receipts in X/Z mode.
c
No = 0
Yes = 4
Print commercial message on journal in X/Z mode.
a
No = 0
Yes = 1
Print bottom message on journal in X/Z mode.
b
No = 0
Yes = 2
Print commercial message on receipt in PGM mode.
c
No = 0
Yes = 4
Print bottom message on receipt in PGM mode.
a
No = 0
Yes = 1
Print commercial message on journal in PGM mode.
b
No = 0
Yes = 2
Print bottom message on journal in PGM mode.
c
No = 0
Yes = 4
Print commercial message on FC or AUTO-PGM receipts.
a
No = 0
Yes = 1
Print bottom message on FC or AUTO-PGM receipts.
b
No = 0
Yes = 2
Print commercial message on FC or AUTO-PGM journal.
c
No = 0
Yes = 4
Print bottom message on FC or AUTO-PGM journal.
a
No = 0
Yes = 1
b
No = 0
Yes = 4
NINS
D10
;
(a+b+c)
D9
;
(a+b+c)
D8
;
;
:
(a+b+c)
D6
:
(a+b+c)
D5
:
(a+b+c)
D4
:
(a+b+c)
D3
:
(a+b+c)
D2
:
(a+b)
D1
✍ Version 1.01
46
+
(a+b+c)
D8
D7
Print commercial message on receipts in REG/RF mode.
Print Australian GST MOF message.
:
Initial value
D7
;
(a+b+c)
D6
;
(a+b+c)
D5
;
(a+b+c)
D4
;
(a+b+c)
D3
;
(a+b+c)
D2
;
(a+b)
D1
Address code 25 (condiment etc.)
Enable to register a non-department link PLU.
Choice
Program code
Yes = 0
No = 1
D4
:
Always “0”
1=0
2=1
a
No = 0
Yes = 1
Obey registration quantities of child PLU to its parent PLU.
b
Yes = 0
No = 2
Restriction (to 0 or 5) on the last one digit for <CASH>, <RC>, <PD>,
money declaration amount (by <CASH> or <NON ADD>).
c
No = 0
Yes = 4
Restrict (to 0 or 5) on the last one digit for amount tender.
;
D4
;
;
:
A
D2
D2
:
F (Australia)
or
; (other area)
D3
Previous item void:
1 By using <VOID>; ordinary procedure
2 By using <REVIEW>
Initial value
(a+b+c)
D1
D3
D1
Program 3
Description
Address code 26 (check tracking)
Description
Check tracking method:
1 Check No., 2 Table No.
Choice
a
Maximum digit of check number:
1 6-digit, 2 12-digit
(If you use “table analysis” or “table range”, select 1.)
b
Tax calculation by new balance
(Calculation result is not saved into totalizer.)
Enable to perform <NEW/OLD> during check tracking/clerk interrupt.
Print previous balance amount, when registration begins 0 with old check.
Program code
1=0
2=1
1=0
2=4
:
b
(a+b)
D6
:
;
D5
No = 0
Yes = 1
Yes = 0
No = 2
Always “000”
;
(a+b)
D6
No = 0
Yes = 1
a
Initial value
:
D5
;
(a+b)
D4
(a+b)
D4
;;;
;;;
Program code
Initial value
D3 D2 D1
D3 D2 D1
Address code 27 (clerk control)
Description
Choice
Enable clerk/cashier interrupt.
a
No = 0
Yes = 1
Print of clerk/cashier's name on receipt following sign back on at D10 = 1.
(enable clerk/cashier interrupt)
b
No = 0
Yes = 4
;
~ ;
D9 ~ D3
Always “0000000”
Auto sign-off timer. (in second) (“00” means no auto sign-off.)
TK-3200 Dealer's Manual
:
(a+b)
D10
Significant
numbers
::
D2 D1
;
(a+b)
D10
;
~ ;
D9 ~ D3
;;
D2 D1
47
NINS
Key function/machine feature (P3)
Address code 28 (Euro)
Description
Choice
Yes = 0
No = 1
Define Euro as the main currency.
Significant
number (0 ~ 2)
Select rounding option:
Round off = 0, Cut off = 1, Round up = 2
Significant
numbers
Exchange rate (within 6-digits)
Decimal point position of exchange rate:
Integer only = 0
1st decimal place = 1, 2nd decimal place = 2, 3rd decimal place = 3,
4th decimal place = 4, 5th decimal place = 5, 6th decimal place = 6
Example: (D8 ~ D2)
1 Euro = 1.977 DM; Set “0019773”
1 Euro = 1957.77319 Lit; Set “1957772”
Significant
number (0 ~ 6)
Always “0”
Program code
Initial value
:
;
:
;
D10
D9
D10
D9
:::::: ;;;;;;
D8 D7 D6 D5 D4 D3
D8 D7 D6 D5 D4 D3
:
;
;
;
D1
D1
Program code
Initial value
:
S
D2
D2
Address code 29 (Euro)
Description
Choice
Monetary mode of sub currency:
0 = 0, ~0 = 1, ~00 = 2, ~000 = 3
Significant
number (0 ~ 3)
Apply rounding for sub currency. *
No rounding = 0, IF1 = 1, IF2 = 2, Danish = 3, Norwegian = 4, Finnish = 6
Australia = 7, South Africa = 8
Significant
number (0 ~ 8)
:
;
Cash drawer number of sub currency: 0 ~ 2
(“0” means main drawer.)
Significant
number (0 ~ 2)
:
;
Print tendered amount in sub currency converted to main currency.
a
No = 0
Yes = 1
Selection of the currency of subtotal printout:
1 Main currency only, 2 Main and sub currency
b
1=0
2=2
Print total in sub currency by double sized letter.
c
No = 0
Yes = 4
Selection of the currency of change:
1 Main currency, 2 Sub currency
a
1=0
2=1
Print the cash in drawer of sub currency on fixed total reports.
(If the cash in drawer of main currency is skipped, this line is also skipped.)
b
No = 0
Yes = 2
Display symbol of sub currency:
1 e(Euro), 2 l(Local)
c
1=0
2=4
tendered: 1 Main currency, 2 Sub currency
(It is necessary to set this restriction to <CASH> key.)
a
1=0
2=1
Print rounding total of sub currency on fixed totalier report.
b
No = 0
Yes = 2
The currency to restrict (to 00, 25, 50, 75) on last two digits for amount
Last 1 digit for sub currency monetary amount entries to 0 or 5.
c
No = 0
Yes = 4
Selection of the change amount printout:
1 Main and sub currency, 2 Dependent upon D6 - a of this worksheet
a
1=0
2=1
Calculation method of change amount in sub currency:
1 Convert the change amount in main currency into sub currency.
2 Subtract the equivalent value of subtotal amount in sub currency from
the equivalent value of the tendered amount in sub currency.
b
1=0
2=2
Always “000”
D10
D9
D8
:
(a+b+c)
D7
:
(a+b+c)
D6
:
(a+b+c)
D5
:
48
NINS
D9
D8
;
(a+b+c)
D7
;
(a+b+c)
D6
;
(a+b+c)
D5
;
(a+b)
D4
(a+b)
D4
;;;
;;;
D3 D2 D1
* Refer to the Address code 04 programming.
D10
D3 D2 D1
Address code 31 (scanning)
Print consolidated scanning PLU reset report. *
a
Choice
Program code
Initial value
Yes = 0
No = 1
D8
D8
No = 0
Yes = 1
Print report before scanning PLU Z consolidation. *
b
No = 0
Yes = 4
Print scanning PLU code on receipt.
a
No = 0
Yes = 1
Print scanning PLU code on journal.
b
No = 0
Yes = 2
Print scanning PLU code on report.
c
No = 0
Yes = 4
:
:
(a+b)
D7
:
H
(a+b+c)
D6
;;
;;
Significant
numbers
(000 ~ 999)
:::
;;;
Choice
Program code
Initial value
D5 D4
(If a scanning PLU did not move during these days period, this item will
be printed on the Inactive scanning PLU report.)
;
(a+b)
D7
(a+b+c)
D6
Always “00”
Inactive days:
;
D3 D2 D1
D5 D4
D3 D2 D1
Program 3
Description
The oldest item is deleted if the scanning PLU file becomes full.
(If “No” is selected, alert only.)
* These options are also effective, when consolidation is activated by job command.
Address code 32 (direct maintenance PLU)
Description
Skip the unit price field programming of direct maintenance PLU file in
PGM 1 mode.
Skip the link field programming of direct maintenance PLU file in PGM 1
mode.
a
b
No = 0
Yes = 1
No = 0
Yes = 2
Always “000”
No = 0
Yes = 4
Skip the unit price field programming of direct maintenance PLU file in
PGM 3 mode.
a
No = 0
Yes = 1
Skip the link field programming of direct maintenance PLU file in PGM 3
mode.
b
No = 0
Yes = 2
Skip the character field programming of direct maintenance PLU file in
PGM 3 mode.
c
No = 0
Yes = 4
Skip the status field programming of direct maintenance PLU file in PGM 3
mode.
a
No = 0
Yes = 1
Skip the bottle link field programming of direct maintenance PLU file in
PGM 3 mode.
b
No = 0
Yes = 2
Skip the mix & match field programming of direct maintenance PLU file in
PGM 3 mode.
c
No = 0
Yes = 4
TK-3200 Dealer's Manual
+
(a+b)
D9
;;;
;;;
:
;
D8 D7 D6
Skip the optimum stock field programming of direct maintenance PLU file
in PGM 3 mode.
Always “00”
:
(a+b)
D9
D5
:
(a+b+c)
D4
:
D8 D7 D6
D5
+
(a+b+c)
D4
+
(a+b+c)
D3
(a+b+c)
D3
;;
;;
D2 D1
D2 D1
49
NINS
Key function/machine feature (P3)
Address code 33 (batch PLU maintenance)
Description
Skip the record No. designation of batch maintenance PLU file.
Choice
a
No = 0
Yes = 1
Skip the optimum stock field programming of batch maintenance PLU file.
b
No = 0
Yes = 4
Skip the unit price field programming of batch maintenance PLU file.
a
No = 0
Yes = 1
Skip the link field programming of batch maintenance PLU file.
b
No = 0
Yes = 2
Skip the character field programming of batch maintenance PLU file.
c
No = 0
Yes = 4
Skip the status field programming of batch maintenance PLU file.
a
No = 0
Yes = 1
Skip the bottle link field programming of batch maintenance PLU file.
b
No = 0
Yes = 2
Skip the mix & match field programming of batch maintenance PLU file.
c
No = 0
Yes = 4
Program code
:
(a+b)
D10
:
(a+b+c)
D9
:
;
(a+b+c)
D9
;
(a+b+c)
D8
;;;
;;;
Always “00”
;;
;;
Always “00”
;;
D7 D6 D5
NINS
;
(a+b)
D10
(a+b+c)
D8
Always “000”
50
Initial value
D4 D3
D2 D1
D7 D6 D5
D4 D3
;;
D2 D1
Address code 36 (store/recall/auto new check number)
Description
Reset the store/recall/auto new check starting number after open check reset report
Store/recall/auto new check starting number (0000 = 0001) *
Store/recall/auto new check ending number (0000 = 9999) *
Choice
Program code
Initial value
No = 0
Yes = 1
:
;
Significant
numbers
(0000 ~ 9999)
Significant
numbers
(0000 ~ 9999)
::::
;;;;
D8 D7 D6 D5
D8 D7 D6 D5
::::
;;;;
D9
D4 D3 D2 D1
D9
D4 D3 D2 D1
* The starting number should be smaller than the ending number.
* If the starting number is bigger than the ending number, the E056 is occurred.
Description
Auto check starting number (0000 = 0001) *
Auto check ending number (0000 = 9999) *
Choice
Program code
Initial value
Significant
numbers
(0000 ~ 9999)
Significant
numbers
(0000 ~ 9999)
::::
;;;;
D8 D7 D6 D5
D8 D7 D6 D5
::::
;;;;
D4 D3 D2 D1
D4 D3 D2 D1
* The starting number should be smaller than the ending number.
* If the starting number is bigger than the ending number, the E056 is occurred.
TK-3200 Dealer's Manual
51
NINS
Program 3
Address code 37 (check number)
Key function/machine feature (P3)
Department key/flat-PLU key/PLU program (Batch feature programming)
Programming procedure
To another department/flat-PLU key
Department/flat-PLU key
PGM
6 3s 6
MENU
B
SHIFT
or
turnover
sheet holder
Mode switch
Department
6 :~: 6
6s
Program data
(12 digits)
Flat-PLU
To a new (not sequential) PLU
Different program to the next PLU
PLU
PGM
6 3s 6
Mode switch
PLU No.
+6 : ~ : 6 a 6s
Program data
(12 digits)
(Rec No. 4 digits)
(Random code 6 digits)
Program data
Description
Single item control:
Normal receipt = 0, Single item receipt = 3
Choice
Program code
Initial value
Significant
number
D12
D12
Price change registration is enable.
(Only effective for scanning PLU linked to this department)
a
No = 0
Yes = 1
Multiplication registration is enable.
(Only effective for scanning PLU linked to this department)
b
No = 0
Yes = 2
Compulsory input unit price manually.
(Only effective for scanning PLU linked to this department)
c
No = 0
Yes = 4
Significant
number
Normal/condiment/preparation (Not for department)
Normal item = 0, Condiment = 1, Preparation = 2
Disable operation in RF/REG– mode.
a
Disable operation in REG 2 mode.
b
Disable operation in REG 1 mode.
c
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Taxable status:
See the next page.
:
:
a
Enable negative price.
b
Hash
c
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Always “0”
(a+b+c)
D11
:
;
D10
:
Low digit limitation (LDL) for manually entered unit price.
Multiple validation:
(If “No”, validation is allowed only one time.)
a
Print difference between the normal price and reduced price.
b
Open PLU (only for PLU)
c
Commission 1
a
Commission 2
Compulsory number of condiment/preparation PLU input.
52
NINS
b
Yes = 0
No = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
Significant
number (0 ~ 8)
D10
;
(a+b+c)
D9
(a+b+c)
D9
::
;;
:
D8 D7
;
(a+b+c)
D6
(a+b+c)
D6
:
;
:
;
D5
Significant
number
;
(a+b+c)
D11
D8 D7
Enable 0 unit price.
;
D4
:
(a+b+c)
D3
:
D5
D4
;
(a+b+c)
D3
;
(a+b)
D2
(a+b)
D2
:
;
D1
D1
Taxable status
for Singapore
;
Always “0”
D8
Taxable 1 status
a
No = 0
Yes = 1
Taxable 2 status
b
No = 0
Yes = 2
Taxable 3 status
c
No = 0
Yes = 4
Taxable 4 = 4
Taxable 5 = 5
Taxable 6 = 6
Taxable 7 = 7
Taxable 8 = 8
Taxable 9 = 9
Taxable 10 = 10
Significant
numbers
::
D8 D7
Program 3
for Other area
Non tax = 0
Taxable 1 = 1
Taxable 2 = 2
Taxable 3 = 3
:
(a+b+c)
D7
TK-3200 Dealer's Manual
53
NINS
Key function/machine feature (P3)
Department key/flat-PLU key/PLU program (Individual feature programming)
Programming procedure
To another department/flat-PLU key
Department/flat-PLU key
Same program
PGM
6 3s 6 : : 66s 6 : ~ : 6
Mode switch
Program data
Address code
PLU
Department
6s
Flat-PLU
To a new (not sequential) PLU
Different program to the next PLU
Same program
PGM
6 3s 6 : :66s 6 PLU No. + 6 : ~ : 6 a 6 s
Mode switch
Address code
Program data
Range (Department/PLU/flat-PLU)
PGM
6 3s 6 990000 : :s 6 : : 66s6
Department
= 05
PLU/flat-PLU = 04
Mode switch
Starts “0001”.
}
Address code
Ends “the last record”.
6 : ~ : 6 a 6 : ~ : 6 a6 : ~: a6s
Start rec-#
Program data
End rec-#
Program data (by address code)
Address code 11 (link)
Description
54
NINS
Choice
Link group record number: (00 ~ 99)
Significant
numbers
Link department record number: (00 ~ 99)
(only for PLU)
Significant
numbers
Program code
::
D4 D3
::
D2 D1
Address code 12 (random code)
Description
PLU random code (only for PLU)
Choice
Program code
Significant
numbers
::::::
Choice
Program code
D6 D5 D4 D3 D2 D1
Address code 13 (set menu)
Description
Set menu table/bottle link table record number (only for PLU)
Significant
numbers
Set menu table/bottle link table file number (only for PLU)
File number: set menu table = 28, bottle link table = 73
Significant
numbers
::::
D6 D5 D4 D3
::
D2 D1
Description
Choice
Significant
numbers
Optimum stock quantity (0.001 ~ 99.999)
Enter without decimal point. (only for PLU)
Program 3
Address code 14 (stock)
Program code
:::::
D5 D4 D3 D2 D1
Address code 15 (high amount limit)
Description
High amount limit for entering unit price manually.
Choice
Program code
Significant
numbers
::::::
D6 D5 D4 D3 D2 D1
Address code 16 (order control)
Description
Choice
Program code
Order character record number (00 ~ 99)
Significant
numbers
D6 D5
Printing color of order:
Normal = 0
Reverse = 1
Print order to “Order 1 (printer connection table)” printer.
a
No = 0
Yes = 1
Print order to “Order 2 (printer connection table)” printer.
b
No = 0
Yes = 2
Print order to “Order 3 (printer connection table)” printer.
c
No = 0
Yes = 4
Always “00”
TK-3200 Dealer's Manual
::
:
D4
:
(a+b+c)
D3
;;
D2 D1
55
NINS
Key function/machine feature (P3)
Address code 17 (Bon receipt control)
Description
Choice
Program code
:
Significant
number
Number of Bon receipts (1 ~ 9)
(If “0”, no Bon is issued.)
D1
Other address code
Address
code
18
19
01
02
03
05
Description
Single item control:
Normal receipt = 0, Single item receipt = 3
Price change registration is enable.
(Only effective for scanning PLU linked to this department)
a
No = 0
Yes = 1
Multiplication registration is enable.
(Only effective for scanning PLU linked to this department)
b
No = 0
Yes = 2
Compulsory input unit price manually.
(Only effective for scanning PLU linked to this department)
c
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG 2 mode.
b
No = 0
Yes = 2
Disable operation in REG 1 mode.
c
No = 0
Yes = 4
04
Significant
numbers
Taxable status:
See the status table of the batch feature programming section.
Enable 0 unit price.
a
No = 0
Yes = 1
Enable negative price.
b
No = 0
Yes = 2
c
Multiple validation:
(If “No”, validation is allowed only one time.)
a
Yes = 0
No = 1
Print difference between the normal price and reduced price.
b
No = 0
Yes = 2
NINS
:
:
(a+b+c)
::
D2 D1
:
(a+b+c)
:
:
(a+b+c)
c
No = 0
Yes = 4
Commission 1
a
No = 0
Yes = 1
b
No = 0
Yes = 2
(a+b)
Significant
number (0 ~ 8)
:
Commission 2
56
:
(a+b+c)
Open PLU (Only for PLU)
09
10
:
No = 0
Yes = 4
Significant
number
Low digit limitation (LDL) for manually entered unit price.
Program code
No = 0
Yes = 4
Significant
number
Normal/condiment/preparation
Normal item = 0, Condiment = 1, Preparation = 2
Hash
07
Choice
Significant
number
Compulsory number of condiment/preparation PLU input.
:
Transaction key program
Programming procedure
To another transaction key
PGM
6 3s 6 : ~ : 6
Program data
Mode switch
Transaction
key
6s
Program data
<CASH>, <CHARGE>, <CHECK>
Choice
No = 0
Yes = 1
Restriction (to 0, 5) on last digit for amount tendered.
(Only effective for <CHARGE> or <CHECK>)
Significant number
(0 ~ 9)
Allowable number of validation printing (“0” means no limitation) *1 *2 *3 *4 *5
Force validation operation.
*1 *2 *3 *4 *5
a
No = 0
Yes = 1
Restriction (to 00, 25, 50, 75) on last two digits for amount tendered
(Only for <CASH> in Danish rounding) *5
b
No = 0
Yes = 4
Disable operation in RF/REG– mode. *1 *4 *5
a
No = 0
Yes = 1
b
No = 0
Yes = 2
Disable operation in REG1 mode. *1 *4 *5
c
No = 0
Yes = 4
Force batch slip printing. *1 *2 *4
a
No = 0
Yes = 1
Force check endorsement printing (Only for <CHECK>). *3 *4 *5
b
No = 0
Yes = 2
Force check printing (Only for <CHECK>). *3 *4 *5
c
No = 0
Yes = 4
Prohibit entry of a partial payment
a
No = 0
Yes = 1
Prohibit the entry of the amount tendered.
b
No = 0
Yes = 2
Force entry of the amount tendered.
c
No = 0
Yes = 4
Print VAT breakdown. *1 *2 *4
a
No = 0
Yes = 1
Check cashing commission (Only for <CHECK>) *3
1 Use an amount
2 Use a rate
b
Amount = 0
Rate = 2
Validation amount *3 *4
1 Print subtotal amount 2 Print amount tendered
c
Subtotal = 0
Tender = 4
Disable operation in REG2 mode.
*1 *4 *5
Perform Finnish rounding.
High amount limit specification for subtotal and tendering amounts. *3
No = 0
Yes = 4
Maximum value
(0 ~ 9)
Number of zeros
(0 ~ 9)
High amount limit specification for change amount due.
Maximum value
(0 ~ 9)
Number of zeros
(0 ~ 9)
Program code
:
D12
:
D11
:
Program 3
Description
(a+b)
D10
:
(a+b+c)
D9
:
(a+b+c)
D8
:
(a+b+c)
D7
:
(a+b+c)
D6
:
D5
::
D4 D3
::
D2 D1
*1 Those are valid options for Auto Cash as well.
*2 Those are valid options for Single item as well.
*3 Those are valid options for Cashing a check as well.
*4 Those are valid options for Currency exchange (include partial tender) as well.
*5 Those are valid options for Media change (include partial tender) as well.
TK-3200 Dealer's Manual
57
NINS
Key function/machine feature (P3)
<CREDIT>
Description
Choice
No = 0
Yes = 1
Restriction (to 0, 5) on last digit for amount tendered.
Significant number
(0 ~ 9)
Allowable number of validation printing (“0” means no limitation) *1
Force validation operation. *1
No = 0
Yes = 1
Disable operation in RF/REG– mode. *1
a
No = 0
Yes = 1
Disable operation in REG2 mode. *1
b
No = 0
Yes = 2
Disable operation in REG1 mode. *1
c
No = 0
Yes = 4
Force batch slip printing.
No = 0
Yes = 1
Prohibit entry of a partial payment
a
No = 0
Yes = 1
Prohibit the entry of the amount tendered.
b
No = 0
Yes = 2
Force entry of the amount tendered.
c
No = 0
Yes = 4
Print VAT breakdown.
a
No = 0
Yes = 1
b
Subtotal = 0
Tender = 4
Validation amount
1 Print subtotal amount
2 Print amount tendered
Perform Finnish rounding.
High amount limit specification for subtotal and tendering amounts.
No = 0
Yes = 4
Maximum value
(0 ~ 9)
Number of zeros
(0 ~ 9)
Program code
:
D12
:
D11
:
D10
:
(a+b+c)
D9
:
D8
:
(a+b+c)
D7
:
(a+b)
D6
:
D5
::
D4 D3
;
Always “0”
D2
Specify credit in drawer total in the fixed totalizer. *1
*1 Those are valid options for Media change (include partial tender) as well.
58
NINS
Significant number
(0 ~ 4)
:
D1
<NEW BALANCE>
Choice
Significant number
(0 ~ 9)
Allowable number of validation printing (“0” means no limitation)
a
No = 0
Yes = 1
Cancel the transaction if no item is registered.
b
No = 0
Yes = 4
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Force batch slip printing.
a
No = 0
Yes = 1
Open drawer when the key is pressed.
b
No = 0
Yes = 2
No receipt is issued.
c
No = 0
Yes = 4
Force validation operation.
Significant
number
Function after normal (not in check tracking) registration:
Operation error = 0, Auto Cash = 1, New balance = 2
Print VAT breakdown.
Service charge
1 Use an amount
Always “00000”
TK-3200 Dealer's Manual
a
2 Use a rate
b
No = 0
Yes = 1
Amount = 0
Rate = 2
Program code
:
D11
:
(a+b)
D10
:
(a+b+c)
D9
:
(a+b)
D8
:
Program 3
Description
D7
:
(a+b)
D6
;;;;;
D5 D4 D3 D2 D1
59
NINS
Key function/machine feature (P3)
<CHARACTER RECALL>, <CHARACTER PRINT>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Program code
:
(a+b+c)
D9
;
Always “0”
D8
Disable to change mode switch after registration.
(only effective for <character recall>)
Print characters on receipt, guest receipt, or slip.
a
No = 0
Yes = 1
b
Yes = 0
No = 2
:
(a+b)
D7
;;;;
Always “0000”
D6 D5 D4 D3
;;
Always “00”
D2 D1
<TIP>
Description
Choice
Yes = 0
No = 4
Multiple validation
(If “No”, only one validation printing is possible.)
Disable operation in RF/REG– mode.
a
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
NINS
:
(a+b+c)
D9
;;;;;
Always “00000”
60
D11
D10
No = 0
Yes = 1
Always “00”
:
;
Always “0”
High digit limitation (HDL) for manually entered unit price
(“9” means NOT allow manual entry)
Program code
D8 D7 D6 D5 D4
Significant
number
:
D3
;;
D2 D1
<LOAN>, <PICK UP>
Description
Restriction (to 0, 5) on last digit for amount tendered.
Choice
Program code
No = 0
Yes = 1
D12
Significant number
(0 ~ 9)
Allowable number of validation printing (“0” means no limitation)
No = 0
Yes = 1
Force validation operation. (only effective after receipt issuance)
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
:
:
D11
:
D10
:
(a+b+c)
D9
;;;;
Always “0000”
D8 D7 D6 D5
Number of zeros
(0 ~ 9)
::
Program 3
Maximum value
(0 ~ 9)
High amount limit specification for entering amounts
D4 D3
;;
Always “00”
D2 D1
<RECEIVED ON ACCOUNT>, <PAID OUT>
Description
Choice
Significant number
(0 ~ 9)
Allowable number of validation printing (“0” means no limitation)
Force validation operation.
No = 0
Yes = 1
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
D11
:
D10
:
(a+b+c)
D9
D8 D7 D6 D5
Maximum value
(0 ~ 9)
Number of zeros
(0 ~ 9)
Always “00”
:
;;;;
Always “0000”
High amount limit specification for entering amounts
Program code
::
D4 D3
;;
D2 D1
These programmable options are not effective for the Euro function.
TK-3200 Dealer's Manual
61
NINS
Key function/machine feature (P3)
<+ (PLUS)>, <- (MINUS)>, <COUPON>
Description
Multiple validation (If “No”, only one validation printing is possible.)
Choice
Program code
Yes = 0
No = 4
D11
:
;
Always “0”
D10
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
:
(a+b+c)
D9
::
Taxable status:
See below.
D8 D7
No = 0
Yes = 1
Allow credit balance. (–, CPN only)
:
D6
;
Always “0”
D5
Allow key operation after <SUBTOTAL>.
a
Allow key operation after item registration.
b
Yes = 0
No = 1
Yes = 0
No = 4
Significant
number
High digit limitation (HDL) for manually entered unit price
(“9” means NOT allow manual entry.)
Commission 1
a
No = 0
Yes = 1
Commission 2
b
No = 0
Yes = 2
:
(a+b)
D4
:
D3
:
(a+b)
D2
;
Always “0”
D1
Taxable status
for Singapore
;
Always “0”
Taxable 1 status
a
Taxable 2 status
b
No = 0
Yes = 2
Taxable 3 status
c
No = 0
Yes = 4
for Other area
Non tax = 0
Taxable 1 = 1
Taxable 2 = 2
Taxable 3 = 3
62
NINS
D8
No = 0
Yes = 1
Taxable 4 = 4
Taxable 5 = 5
Taxable 6 = 6
Taxable 7 = 7
Taxable 8 = 8
Taxable 9 = 9
Taxable 10 = 10
All taxable = 99
Significant
numbers
:
(a+b+c)
D7
::
D8 D7
<DEPOSIT>
Description
Choice
No = 0
Yes = 1
Restriction (to 0, 5) on last digit for amount tendered.
a
Multiple validation (If “No,” only one validation is possible.)
b
No = 0
Yes = 4
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Media definition:
Significant
number
Maximum value
(0 ~ 9)
Number of zeros
(0 ~ 9)
TK-3200 Dealer's Manual
Program 3
Open cash drawer.
Always “00”
:
(a+b+c)
D9
D8
DEPO+ = 0
DEPO– = 1
No = 0
Yes = 2
High amount limit specification for entering amounts
:
(a+b)
D10
;
Always “0”
Cash = 0, Charge = 1, Check = 2,
Credit 1 = 3, Credit 2 = 4, Credit 3 = 5, Credit 4 = 6
D12
D11
No = 0
Yes = 1
Key attribution
:
;
Always “0”
Force validation operation.
(only effective after receipt issuance)
Program code
:
D7
:
D6
:
D5
::
D4 D3
;;
D2 D1
63
NINS
Key function/machine feature (P3)
<PREVIOUS BALANCE>
Description
Multiple validation (If “No”, only one validation printing is possible.)
Choice
Program code
Yes = 0
No = 4
D11
:
;
Always “0”
D10
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
:
(a+b+c)
D9
::
Taxable status:
See below.
D8 D7
Key attribution
Print when registered.
a
PB+ = 0
PB– = 1
b
Yes = 0
No = 4
:
(a+b)
D6
;;
Always “00”
D5 D4
Significant
number
High digit limitation (HDL) for manually entered unit price
(“9” means NOT allow manual entry.)
:
D3
;;
Always “00”
D2 D1
Taxable status
for Singapore
;
Always “0”
Taxable 1 status
a
Taxable 2 status
b
No = 0
Yes = 2
Taxable 3 status
c
No = 0
Yes = 4
for Other area
Non tax = 0
Taxable 1 = 1
Taxable 2 = 2
Taxable 3 = 3
64
NINS
D8
No = 0
Yes = 1
Taxable 4 = 4
Taxable 5 = 5
Taxable 6 = 6
Taxable 7 = 7
Taxable 8 = 8
Taxable 9 = 9
Taxable 10 = 10
All taxable = 99
Significant
numbers
:
(a+b+c)
D7
::
D8 D7
<PREMIUM (%+)>, <DISCOUNT (%-)>
Description
Multiple validation
(If “No”, only one validation printing is possible.)
Choice
Program code
Yes = 0
No = 4
D11
:
;
Always “0”
D10
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
:
(a+b+c)
D9
::
Taxable status:
See below.
D8 D7
Significant
number
Rounding:
Round off = 0, cut off = 1, round up = 2
Allow key operation after <SUBTOTAL>.
a
Allow key operation after item registration.
b
Yes = 0
No = 1
Yes = 0
No = 4
:
D6
:
D5
Program 3
No = 0
Yes = 2
Prohibit manual rate override.
:
(a+b)
D4
;
Always “0”
D3
Commission 1
a
No = 0
Yes = 1
Commission 2
b
No = 0
Yes = 2
:
(a+b)
D2
;
Always “0”
D1
Taxable status
for Singapore
;
Always “0”
D8
Taxable 1 status
a
No = 0
Yes = 1
Taxable 2 status
b
No = 0
Yes = 2
Taxable 3 status
c
No = 0
Yes = 4
for Other area
Non tax = 0
Taxable 1 = 1
Taxable 2 = 2
Taxable 3 = 3
TK-3200 Dealer's Manual
Taxable 4 = 4
Taxable 5 = 5
Taxable 6 = 6
Taxable 7 = 7
Taxable 8 = 8
Taxable 9 = 9
Taxable 10 = 10
All taxable = 99
Significant
numbers
:
(a+b+c)
D7
::
D8 D7
65
NINS
Key function/machine feature (P3)
<RATE TAX>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Program code
:
(a+b+c)
D9
;;
Always “00”
D8 D7
No = 0
Yes = 2
Prohibit manual entry.
Significant
number
Rounding:
Round off = 0, cut off = 1, round up = 2
:
D6
:
D5
;;;;
Always “0000”
D4 D3 D2 D1
<MANUAL TAX>
Description
Choice
Yes = 0
No = 4
Multiple validation
(If “No”, only one validation printing is possible.)
Program code
:
D11
;
Always “0”
D10
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
:
(a+b+c)
D9
;;;;;
Always “00000”
D8 D7 D6 D5 D4
Significant
number
High digit limitation (HDL) for manually entered unit price
(“9” means NOT allow manual entry.)
:
D3
;;
Always “00”
D2 D1
<ERROR CORRECTION/CANCEL>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
These programmable options are not effective for error correction function.
66
NINS
:
(a+b+c)
D9
;;;;;;;
Always “0000000”
A range of cancellation:
1 Complete cancellation/2 Current receipt only
Program code
D8 D7 D6 D5 D4 D3 D2
2=0
1=1
:
D1
<VOID>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Program code
:
(a+b+c)
D9
;;;;;;;
Always “0000000”
D8 D7 D6 D5 D4 D3 D2
1 From the beginning of this transaction
2 Current receipt only
a
2=0
1=1
Affect stock quantity
b
Yes = 0
No = 2
:
(a+b)
D1
Program 3
A range of item correction:
<RECEIPT>
Description
Maximum number of post receipts (0 ~ 9)
(“0” means 1 post receipt.)
Choice
Program code
Significant
number
D12
:
;;
Always “00”
D11 D10
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
:
(a+b+c)
D9
;
Always “0”
D8
Print current time on guest receipt.
No = 0
Yes = 4
Clear finalized check.
Yes = 0
No = 1
:
D7
:
D6
;
Always “0”
D5
No = 0
Yes = 1
:
Receipt is issued by:
•“Receipt 1 (printer connection table)” = 0
•“Receipt 2 (printer connection table)” = 1
•“Receipt 3 (printer connection table)” = 2
Significant
number
:
Line number of guest bottom message (00 ~ 10):
(“00” means no bottom message.)
Significant
numbers
Print journal when receipt is issued by <RECEIPT>.
TK-3200 Dealer's Manual
D4
D3
::
D2 D1
67
NINS
Key function/machine feature (P3)
<CHECK ENDORSEMENT>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Program code
:
(a+b+c)
D9
;
Always “0”
D8
:
Significant
number
Line number of auto-back feed before printing (0 ~ 9)
D7
;;;;;;
Always “000000”
D6 D5 D4 D3 D2 D1
<NON ADD (#)>, <NON ADD (#)/NO SALE>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Always “0000”
Always “00”
68
NINS
:
(a+b+c)
D9
;
Always “0”
Allow mode change or clerk change after non-add registration as first transaction.
(only for non-add function)
Program code
D8
Yes = 0
No = 1
:
D7
;;;;
D6 D5 D4 D3
;;
D2 D1
<CUSTOMER>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Program code
:
(a+b+c)
D9
;
Always “0”
D8
Significant
number
Input method:
Allow replacement = 0, Prohibit replacement = 1, Add enter value = 2
:
D7
;;;;;;
Always “000000”
Program 3
D6 D5 D4 D3 D2 D1
<ARRANGEMENT>
Description
Choice
Significant
numbers
Secret code (0000 ~ 9999)
Enable operation in X1 mode.
a
Yes = 0
No = 1
Enable operation in Z1 mode.
b
Yes = 0
No = 2
Enable operation in X2/Z2 mode.
c
Yes = 0
No = 4
Enable operation in RF/REG– mode.
a
Yes = 0
No = 1
Enable operation in REG2 mode.
b
Yes = 0
No = 2
Enable operation in REG1 mode.
c
Yes = 0
No = 4
Arrangement table link number
TK-3200 Dealer's Manual
::::
D14 D13 D12 D11
:
(a+b+c)
D10
:
(a+b+c)
D9
;
Always “0”
Treat numeric entry as arrange table number
Program code
D8
No = 0
Yes = 1
Significant
numbers
:
D7
::::::
D6 D5 D4 D3 D2 D1
69
NINS
Key function/machine feature (P3)
<CURRENCY EXCHANGE>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Program code
:
(a+b+c)
D9
;
Always “0”
D8
Define amount symbol. (0, 1 ~ 4)
(“0” means local currency symbol.)
Significant
number
Define foreign currency totalizer. (0, 1 ~ 4)
(“0” treats as “1”.)
Significant
number
Rounding:
Round off = 0, cut off = 1, round up = 2
Significant
number
:
D7
:
D6
:
D5
;
Always “0”
D4
Significant
number
Monetary mode (0 ~ 9):
º00 = 2, º0 = 1, 0 = 0, º000 = 3
Monetary symbol for decimal
a
Monetary symbol for separator
b
Assigning drawer number: 0 ~ 2
Decimal = 0
Comma = 1
Comma = 0
Decimal = 4
Significant
number (0 ~ 2)
(“0” means drawer 1.)
:
D3
:
(a+b)
D2
:
D1
<BILL>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
D8 D7 D6 D5 D4
Receipt is issued by:
Always “00”
70
NINS
:
(a+b+c)
D9
;;;;;
Always “00000”
•“Receipt 1 (printer connection table)” = 0
•“Receipt 2 (printer connection table)” = 1
•“Receipt 3 (printer connection table)” = 2
Program code
Significant
number
:
D3
;;
D2 D1
<SLIP>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Program code
:
(a+b+c)
D9
;
Always “0”
D8
Force slip batch printing from the beginning of the transaction.
If “No”, controlled by general function.)
a
No = 0
Yes = 1
Print issuing time
(only effective when slip is printed from the beginning of the transaction).
b
No = 0
Yes = 4
Yes = 0
No = 1
Clear finalized check.
:
(a+b)
D7
:
D6
Program 3
;
Always “0”
D5
No = 0
Yes = 1
Print journal when slip is printed.
:
D4
;;;
Always “000”
D3 D2 D1
<TAX SHIFT>, <TAXABLE SUBTOTAL>
Description
Choice
Maintain of tax shift:
1=0
2=1
1 Do not maintain.
2 Until next tax shift specification.
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Taxable status (00, 01 ~ 10)
(“00” means taxable 1.)
Always “000000”
TK-3200 Dealer's Manual
Significant
numbers
Program code
:
D7
:
(a+b+c)
D9
::
D8 D7
;;;;;;
D6 D5 D4 D3 D2 D1
71
NINS
Key function/machine feature (P3)
<EXEMPT>
Description
Choice
Program code
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Exempt tax 1
a
Yes = 0
No = 1
;
Exempt tax 2
b
Yes = 0
No = 2
:
Exempt tax 3
c
Yes = 0
No = 4
:
(a+b+c)
D9
• Singapore:
D8
(a+b+c)
D7
• Other area
Exempt all (tax 1 ~ 10) = 00
Exempt tax 1 = 01,
Exempt tax 2 = 02,
Exempt tax 4 = 04,
Exempt tax 5 = 05,
Exempt tax 7 = 07,
Exempt tax 8 = 08,
Exempt tax 10 = 10
Exempt tax 3 = 03,
Exempt tax 6 = 06,
Exempt tax 9 = 09,
Significant
numbers
No = 0
Yes = 1
Exempt add-in tax from subtotal amount.
::
D8 D7
:
D6
;;;;;
Always “00000”
D5 D4 D3 D2 D1
<MENU>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Program code
:
(a+b+c)
D9
;
Always “0”
D8
Significant
number
Define assigning menu sheet number. (0, 1 ~ 6)
(If you set “0”, menu sheets are assigned one by one.)
:
D7
;;;;;;
Always “000000”
D6 D5 D4 D3 D2 D1
<OPEN>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Always “000000”
72
NINS
:
(a+b+c)
D9
;
Always “0”
Release “High amount limit.”
Program code
D8
No = 0
Yes = 1
:
D7
;;;;;;
D6 D5 D4 D3 D2 D1
<OPEN2>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Program code
:
(a+b+c)
D9
;
Always “0”
D8
a
Release table number compulsory.
b
Yes = 0
No = 2
Release check number compulsory.
c
Yes = 0
No = 4
Release credit balance error.
(If “Yes,” you can finalize the transaction even if the subtotal is negative.)
a
Yes = 0
No = 1
Release tax calculation compulsory before finalizing.
b
Yes = 0
No = 2
Release guest receipt compulsory.
c
Yes = 0
No = 4
Release validation compulsory.
a
Yes = 0
No = 1
Release check endorsement compulsory.
b
Yes = 0
No = 2
Release check print compulsory.
c
Yes = 0
No = 4
Release slip auto batch print compulsory. (programmed by clerk)
a
Yes = 0
No = 2
b
Yes = 0
No = 4
Release slip manual batch print compulsory. (programmed by finalize key)
Release condiment compulsory.
Yes = 0
No = 1
Release eat-in/takeout compulsory.
Yes = 0
No = 2
:
(a+b+c)
D7
Program 3
Release customer number compulsory.
Yes = 0
No = 1
:
(a+b+c)
D6
:
(a+b+c)
D5
:
(a+b)
D4
:
D3
:
D2
;
Always “0”
D1
<PRICE SHIFT>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Always “000000”
TK-3200 Dealer's Manual
:
(a+b+c)
D9
;
Always “0”
Define assigning price shift number. (0, 1 ~ 3)
(If you set “0”, price shift numbers are assigned one by one.)
Program code
D8
Significant
number
:
D7
;;;;;;
D6 D5 D4 D3 D2 D1
73
NINS
Key function/machine feature (P3)
<REVIEW>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
The reviewed range of item:
2=0
1=1
Display “Check number”, “Table number”, and “Customer number”.
No = 0
Yes = 2
1 From the beginning of this transaction
2 Current receipt only
Program code
:
(a+b+c)
D9
:
(a+b)
D8
;;;;;;;
Always “0000000”
D7 D6 D5 D4 D3 D2 D1
<CLERK NUMBER>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Program code
:
(a+b+c)
D9
;;;;
Always “0000”
D8 D7 D6 D5
Significant
numbers
Clerk secret number (0000 ~ 9999)
(“0000” means no secret number.)
::::
D4 D3 D2 D1
<OPERATOR X/Z>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Always “000000”
74
NINS
:
(a+b+c)
D9
;
Always “0”
Issue consolidation report./Issue stand-alone report.
Program code
D8
Standalone = 0
Consolidation = 1
:
D7
;;;;;;
D6 D5 D4 D3 D2 D1
<TRAY TOTAL>
Description
Choice
Allowable number of validation printing
(“0” means no limitation)
Significant number
(0 ~9)
Force validation operation
No = 0
Yes = 1
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Program code
:
D11
:
D10
:
(a+b+c)
D9
;;
Always “00”
D8 D7
Include add-on tax.
Print tray total when <TRAY TOTAL> is pressed.
a
Yes = 0
No = 1
b
No = 0
Yes = 4
:
(a+b)
D6
Program 3
;;;;;
Always “00000”
D5 D4 D3 D2 D1
<SUBTOTAL>, <MERCHANDISE SUBTOTAL>
Description
Multiple validation
(If “No”, only one validation printing is possible.)
Choice
Program code
Yes = 0
No = 4
D11
:
:
Always “0”
D10
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
;;
Always “00”
Include add-on tax. (<SUBTOTAL> only)
Print when key is pressed.
Always “00000”
TK-3200 Dealer's Manual
:
(a+b+c)
D9
D8 D7
a
Yes = 0
No = 1
b
No = 0
Yes = 4
:
(a+b)
D6
;;;;;
D5 D4 D3 D2 D1
75
NINS
Key function/machine feature (P3)
<MULTIPLICATION>, <QUANTITY/FOR>, <SQUARE>, <CUBE>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Program code
:
(a+b+c)
D9
;;
Always “00”
D8 D7
1=0
2=1
Multiplication procedure: (<KETTEN BON> and <X> only)
1 Quantity × Amount, 2 Amount × Quantity
Significant
number
Rounding:
Round off = 0, cut off = 1, round up = 2
:
D6
:
D5
;;;;
Always “0000”
D4 D3 D2 D1
<NEW CHECK>, <NEW/OLD CHECK>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Always “000000”
76
NINS
:
(a+b+c)
D9
;
Always “0”
Enable auto check assignment
Program code
D8
No = 0
Yes = 1
:
D7
;;;;;;
D6 D5 D4 D3 D2 D1
<PRICE CHANGE>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Program code
:
(a+b+c)
D9
;;;;;
Always “00000”
D8 D7 D6 D5 D4
Significant
number
High digit limitation (HDL) for manually entered unit price
(“9” means NOT allow manual entry.)
:
D3
;
Always “0”
D2
Prohibit to change price greater than the preset price.
a
No = 0
Yes = 1
Prohibit to change price less than the preset price.
b
No = 0
Yes = 2
(a+b)
D1
Choice
Program code
Program 3
:
<CLOCK-IN/OUT>
Description
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
;;
Always “00”
High digit limitation (00 ~ 10), “00” means no limitation.
D8 D7
Significant
numbers
Issue receipt during CLOCK-IN/OUT.
TK-3200 Dealer's Manual
::
D6 D5
;;
Always “00”
Usage:Both CLOCK-IN and CLOCK-OUT = 0,
CLOCK-IN only = 1, CLOCK-OUT only = 2
:
(a+b+c)
D9
D4 D3
Significant
number
Yes = 0
No = 1
:
D2
:
D1
77
NINS
Key function/machine feature (P3)
<EAT-IN>, <TAKEOUT>
Description
Choice
Program code
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Exempt tax 1
a
Yes = 0
No = 1
;
Exempt tax 2
b
Yes = 0
No = 2
:
Exempt tax 3
c
Yes = 0
No = 4
:
(a+b+c)
D9
• Singapore:
D8
(a+b+c)
D7
• Other area
Exempt all (tax 1 ~ 10) = 00
Exempt tax 1 = 01,
Exempt tax 2 = 02,
Exempt tax 4 = 04,
Exempt tax 5 = 05,
Exempt tax 7 = 07,
Exempt tax 8 = 08,
Exempt tax 10 = 10
Exempt tax 3 = 03,
Exempt tax 6 = 06,
Exempt tax 9 = 09,
Subtract add-in tax from subtotal amount.
(only subtracted when the tax is exempted.)
Print when the key is pressed.
Significant
numbers
a
No = 0
Yes = 1
b
No = 0
Yes = 4
::
D8 D7
:
(a+b)
D6
;
Always “0”
D5
Change tax status to: (only effective for VAT)
VAT 1 = 01, VAT 2 = 02, VAT 3 = 03, VAT 4 = 04, VAT 5 = 05,
VAT 6 = 06, VAT 7 = 07, VAT 8 = 08, VAT 9 = 09, VAT 10 = 10
(“00”: No change is made.)
Significant
numbers
::
D4 D3
;;
Always “00”
D2 D1
<ONE TOUCH NLU>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
78
NINS
:
(a+b+c)
D9
;;;;;
Always “00000”
Linked one touch NLU record number (000 ~ 999)
Program code
D8 D7 D6 D5 D4
Significant
numbers
:::
D3 D2 D1
<CANCEL>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Program code
:
(a+b+c)
D9
;;;;;;;
Always “0000000”
D8 D7 D6 D5 D4 D3 D2
A range of item correction:
:
2=0
1=1
1From the beginning of this transaction
2Current receipt only
D1
<VALIDATION>
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Program code
Program 3
Description
:
(a+b+c)
D9
;;
Always “00”
D8 D7
Print total validation to:
Slip (paper is inserted in slip printer) or R/J = 0, Slip only = 1, R/J only = 2
Significant
number
Number of copies by slip validation (0 ~ 9)
(“0” means 1 copy.)
Significant
number
Number of auto feed lines between slip validation printing (00 ~ 99)
Significant
numbers
Number of line feeds before slip validation (00 ~ 99)
Significant
numbers
:
D6
:
D5
::
D4 D3
::
D2 D1
<PRICE INQUIRY>, <STOCK INQUIRY>, <CHECK PRINT>, <REFUND>, <COUPON2>,
<NO SALE>, <VAT>, <PLU>, <PRICE>, <BOTTLE RETURN>,
<SLIP BACKFEED/RELEASE>, <SLIP FEED/RELEASE>, <TABLE NUMBER>,
<RED PRICE>, <DECLARATION>, <RECEIPT ON/OFF>,
<PREVIOUS BALANCE SUBTOTAL>, <OLD CHECK>, <ADD CHECK>, <SEPARATE CHECK>,
<OBR>, <OPEN CHECK>, <MEDIA CHANGE>, <STORE>, <RECALL>
Description
Choice
Disable operation in RF/REG– mode.
a
No = 0
Yes = 1
Disable operation in REG2 mode.
b
No = 0
Yes = 2
Disable operation in REG1 mode.
c
No = 0
Yes = 4
Always “00000000”
TK-3200 Dealer's Manual
Program code
:
(a+b+c)
D9
;;;;;;;;
D8 D7 D6 D5 D4 D3 D2 D1
79
NINS
Key function/machine feature (P3)
Clerk program
Secret number, drawer, check number programming
Programming procedure
To a new (not sequential) clerk
To the next clerk
PGM
6 3s 6 : : 07s6 : : ~ : : 6 a 6 s
D12 D11 ~ D2 D1
Record No.
Mode switch
Data
Description
Choice
Program code
Check number for clerk interrupt
Significant
numbers
Assigning drawer number: 00 ~ 02
Significant
numbers
("00" means drawer 1.)
Clerk detail link programming
a
{
MENU
63s 6 : : 30s 66 B
Record No.
*
File No.
Fixed totalizer:
Transaction key:
PLU:
Department:
Group:
NINS
D6 D5
::::
D4 D3 D2 D1
01
02
04
05
06
To the next total
Department
Transaction
Flat-PLU
6s
}
{
PRICE
6 B
6
SHIFT
}
Scanning
OBR
Scanning code B
PLU No. +
6
6 :::: :: a 6
Record No.
80
::
To a new (not sequential) total
Programming procedure
Mode
switch
D12 D11 D10 D9 D8 D7
Significant
numbers
Clerk secret number
PGM
::::::
*
File No.
Clerk other programming
Programming procedure (individual)
To a new (not sequential) clerk
To the next clerk
PGM
6 3s 6 : : 07s 6 : : s 6 : ~ : a 6 s
Record No.
Mode switch
Program data
Address code
Programming procedure (by range)
PGM
6 3s 6 99000007s 6 : : s 6
Address code
Mode switch
Ends “the last record”.
Program 3
Starts “0001”.
6 : ~ : 6 a 6 : ~ : 6a 6 : ~ : a 6 s
Program data
Start rec-#
Program data
End rec-#
Address code 67 (Clerk control)
Description
Choice
Check number compulsory
No = 0
Yes = 4
Table number compulsory
a
No = 0
Yes = 1
Number of customer compulsory
b
No = 0
Yes = 2
Guest receipt compulsory (at finalization)
c
No = 0
Yes = 4
Guest receipt compulsory (at new balance)
a
No = 0
Yes = 1
Slip auto-batch print compulsory (at finalization)
b
No = 0
Yes = 2
Slip auto-batch print compulsory (at new balance)
c
No = 0
Yes = 4
Significant
number
Clerk attribution:
Cashier = 0, Clerk = 1, Manager = 2
a
No = 0
Yes = 1
Affect stock quantity even if assigning a training clerk
b
No = 0
Yes = 4
Enable to open clerk created by other clerk
a
No = 0
Yes = 1
Disable to sign on
b
No = 0
Yes = 2
Sign off at finalization (secret number only)
c
No = 0
Yes = 4
Training clerk
Program code
:
D10
:
(a+b+c)
D9
:
(a+b+c)
D8
:
D7
:
(a+b)
D6
:
(a+b+c)
D5
;
Always “0”
D4
Compulsory Eat-in/Takeout operation
Always “00”
TK-3200 Dealer's Manual
No = 0
Yes = 2
:
D3
;;
D2 D1
81
NINS
Key function/machine feature (P3)
Address code 68 (Commission rate)
Description
Choice
Commission rate 1 (integer: 00 ~ 99)
Significant
numbers
Commission rate 1 (decimal: 00 ~ 99)
Significant
numbers
Commission rate 2 (integer: 00 ~ 99)
Significant
numbers
Commission rate 2 (decimal: 00 ~ 99)
Significant
numbers
Program code
::
D8 D7
::
D6 D5
::
D4 D3
::
D2 D1
Address code 69 (Table number range)
Description
Choice
Minimum range for table range (1 ~ 999999)
(“0” means no programming.)
Significant
numbers
Maximum range for table range (1 ~ 999999)
(“0” means no programming.)
Significant
numbers
Program code
::::::
D12 D11 D10 D9 D8 D7
::::::
D6 D5 D4 D3 D2 D1
Address code 70 (Mode control)
Description
Choice
Disable to operate in PGM mode.
a
Disable to operate in RF/REG– mode.
b
Disable to operate in REG1 mode.
c
Disable to operate in REG2 mode.
a
Disable to operate in X1 mode.
b
Disable to operate in Z1 mode.
c
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
Disable to operate in X2/Z2 mode.
Program code
:
(a+b+c)
D10
:
(a+b+c)
D9
:
D8
;
Always “0”
D7
Enable to finalize a transaction if the clerk is assigned by clerk key.
a
Enable to finalize a transaction if the clerk is assigned by clerk code/switch.
b
Skip programming fields of batch/direct PLU maintenance file in
accordance with the general function program (address code 32, 33).
a
Enable to issue individual key reset report.
b
Enable to issue read/reset report by file.
a
Enable to issue batch read/reset report.
b
Enable to issue operator reset report.
c
Significant
number
Default menu sheet number (0 ~ 6) after signing on.
82
NINS
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 1
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Enable to use 1st menu sheet.
a
Enable to use 2nd menu sheet.
b
Enable to use 3rd menu sheet.
c
Enable to use 4th menu sheet.
a
Enable to use 5th menu sheet.
b
Enable to use 6th menu sheet.
c
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
:
(a+b)
D6
:
(a+b)
D5
:
(a+b+c)
D4
:
D3
:
(a+b+c)
D2
:
(a+b+c)
D1
Other programs
Time range programming
To a new (not sequential) record
Programming procedure
To the next record
PGM
6 3s 6 : : 09s6 : ~ : 6 a 6 s
Record No.
Mode switch
Program data
Program data
Choice
Start time (hour: 00 ~ 23)
Significant
numbers
Start time (minute: 00 ~ 59)
Significant
numbers
End time (hour: 00 ~ 23)
Significant
numbers
End time (minute: 00 ~ 59)
Significant
numbers
Program code
::
D8 D7
::
Program 3
Description
D6 D5
::
D4 D3
::
D2 D1
Table range programming
Programming procedure
To a new (not sequential) record
To the next record
PGM
6 3s 6 : : 18s 6 : ~ : 6 a 6 s
Mode switch
Record No.
Program data
Program data
Description
Choice
Minimum check number (000000 ~ 999999)
(“0” means “000001.”)
Significant
numbers
Maximum check number (000000 ~ 999999)
(“0” means no programming.)
Significant
numbers
TK-3200 Dealer's Manual
Program code
::::::
D12 D11 D10 D9 D8 D7
::::::
D6 D5 D4 D3 D2 D1
83
NINS
Key function/machine feature (P3)
Tax table programming
Programming procedure
PGM
(for Singapore)
Tax table 1 =
Tax table 2 =
Tax table 3 =
Mode switch
8
3s
8
(for other area)
Tax table 1 =
Tax table 2 =
:
=
Tax table 10 =
{
::::s
8
:
1025
Tax rate (4-digit for integer + 4-digit for decimal)
::::a
Tax table maximum value (“0” means unlimited).
D :
D :
D :
D a
:
Rounding/tax table system code *1
::::a
Sum of a cyclic pattern
::::a
Number of values in each cyclic pattern
::::a
Sum of values in each non-cyclic pattern
8
4
3
2
1
8
8
8
8
::::a
8
s
Actual value of difference of the non-cyclic and cyclic values
You must enter these values in 4-digit block. If the last block
comes out to be only two digits, add two zeros.
Loop to input the next block.
*1 Rounding/Tax system code
Rounding code specification
D4 D3
Rounding
5
0 Rounding off two decimal places
9
0 Rounding up to two decimal places
0
0 Cut off two decimal places
NINS
0125
0225
: : ^: : : : a
8
84
0125
0225
0325
{
Tax system code specification
D2 D1
Rounding
4 -- Singapore rounding
-- 1 Tax table only
-- 2 Add-on tax rate
-- 3 Add-in tax rate
-- 4 Tax-on-tax (Singapore)
-- 6 VAT-on-tax (Thailand)
-- 7 VAT & VAT_2
Example 1:
Add-on rate tax
Tax rate (2-digit for integer + 4-digit for decimal) ...............................
Tax table maximum value ("0" means unlimited). ...............................
Rounding/tax table system code ...........................................................
Sum of a cyclic pattern .........................................................................
Number of values in each cyclic pattern ...............................................
Number of values in each non-cyclic pattern .......................................
Actual value of difference of the non-cyclic and cyclic values ............
PGM
Mode switch
8.25%
0 (no limitation)
5002 (Round off)
0
0
No need to enter.
0
0
}
3s
8
::::s
Tax table No. (0125 ~ 1025)
TK-3200 Dealer's Manual
Program 3
8
8^25a Tax rate (2-digit for integer + 4-digit for decimal)
8
Tax table maximum value (“0” means unlimited).
0a
8
5002a Rounding/tax table system code
8
s
85
NINS
Key function/machine feature (P3)
Example 2:
Add-in rate tax
Tax rate (2-digit for integer + 4-digit for decimal) ............................... 10.00 %
Rounding/tax table system code. .......................................................... 0003 (Cut off)
PGM
Mode switch
3s
8
::::s
8
10a
8
0a
8
0003a
8
s
Tax table No. (0125 ~ 0325)
Tax rate (2-digit for integer + 4-digit for decimal)
Always “0”
Rounding/tax table system code
Example 3:
Singapore tax
Tax table 1
PGM
Mode switch
Tax table 1
3s
8
0125s
8
1a
8
0a
8
5044a
8
s
86
NINS
Tax table 2
Tax table 3
Country tax ..............................................................
Round off/tax on tax ................................................
Service charge .........................................................
Round off/tax on tax ................................................
GST .........................................................................
Round off ................................................................
Tax table 2
3s
8
0225s
8
Tax rate
10a
(4-digit for integer + 4-digit for decimal)
8
Always “0”
0a
8
Rounding/tax table system code
5044a
8
s
1%
5044
10%
5044
3%
5002
Tax table 3
3s
8
0325s
8
3a
8
0a
8
5002a
8
s
Set menu programming
To a new (not sequential) record
Programming procedure
To the next record
a
Maximum 15 items can be set.
PGM
6 3s 6 : : 28s 6
Mode switch
{
Record No.
6
MENU
SHIFT
B
FlatB
PLU
:~: 6+
}6s
PLU code Rec #: within 4 digits
Random code: within 6 digits
Batch X/Z report programming
To a new (not sequential) record
Programming procedure
To the next record
Program 3
a
1st to 11th field
PGM
6 3s 6 : : 29s 6 : ~ : 6 a 6 s
Program data
Record No.
Mode switch
Program data
Control flag (1st field)
Description
Choice
Save X data to CF card.
a
No = 0
Yes = 1
Save Z data to CF card.
b
No = 0
Yes = 2
Issue report, in case of saving data to CF card.
c
No = 0
Yes = 4
Program code
:
(a+b+c)
D4
;
Always “0”
D3
Disable operation in X1 mode.
a
No = 0
Yes = 1
Disable operation in Z1 mode.
b
No = 0
Yes = 2
Disable operation in X2/Z2 mode.
c
No = 0
Yes = 4
Report contents in the X2/Z2 mode:
• Read report of periodic total 1 = 0
• Read report of periodic total 2 = 2
• Reset report of periodic total 1 = 1
• Reset report of periodic total 2 = 3
:
(a+b+c)
D2
Significant
number
:
Choice
Program code
Significant
numbers
::
D1
Report code (2nd ~ 11th field)
Description
Report code:
Fixed totalizer = 11, Transaction key = 12, PLU = 14, PLU by group = 24,
Department = 15, Group = 16, Clerk = 17, Time zone = 19, Monthly = 20,
Scanning PLU = 26, Table analysis = 28, Employee = 29, Mix & match = 61,
PLU stock = 64, PLU stock by group = 34
TK-3200 Dealer's Manual
D2 D1
87
NINS
Key function/machine feature (P3)
Arrangement programming
Programming procedure
**
PGM
*
6 3s 6 : ~ : 38s 6 A6 : ~ : a 6
Arrangement table No. (up to 6 digits)
Record No.
(up to 4 digits)
Mode switch
*
6 : ~: 6A6s
Key operations
* The same A should be pressed.
** Vacant record search: If you want to set an arrangement program to a new record, “vacant record search”
is possible. (enter 0000 instead of entering a record No.)
Check print control programming
Programming procedure
To a new (not sequential) record
To the next record
PGM
6 3s 6 : : 41s 6 : ~ : 6a 6 s
Mode switch
Program data
Record No.
Program data
Description
Choice
Program code
Significant
number
:
Define printing data:
1: Printing amount, 2: Printing amount (double size),
3: Printing date, 4: Printing date (double size)
5: Check endorsement message 1st line, 6: Check endorsement message 2nd line,
7: Check endorsement message 3rd line, 8: Check endorsement message 4th line
Feed before printing.
a
No = 0
Yes = 1
Feed direction
b
Normal = 0
Reverse = 2
Feed one line after printing. *
c
No = 0
Yes = 4
No. of feed lines before printing (0 ~ 9)
Significant
number
Printing offset digits (00 ~ 39)
Significant
numbers
* If you set “0” to this option, one line back feed is made automatically.
88
NINS
D5
:
(a+b+c)
D4
:
D3
::
D2 D1
Mix & match programming
Programming procedure
To a new (not sequential) record
To the next record
PGM
6 3s 6 : : 51s6
Mode switch
Record No.
6 :~ : a 6
a
:~ : a 6s
Program data
(2nd field)
Program data
(1st field)
Program data
Choice
Program code
Program 3
Description
• Amount (1st field)
Significant
numbers
Discount amount
::::::
D6 D5 D4 D3 D2 D1
• Flag (2nd field)
::
Taxable status (see below)
D6 D5
;
Always “0”
*
D4
Mix & match type*:
Discount 1 = 0: Discount every required quantity
Discount 2 = 1: Discount once
Discount 3 = 2: Discount continuously
Significant
number
Mix & match required quantity
Significant
numbers
:
D3
::
D2 D1
Example: (item unit price = $3.00, required quantity = 3, discount amount = $0.50)
• Discount 1: $3.00, $3.00, $2.50, $3.00, $3.00, $2.50, $3.00, $3.00, $2.50 ...
• Discount 2: $3.00, $3.00, $2.50, $3.00, $3.00, $3.00, $3.00, $3.00, $3.00 ...
• Discount 3: $3.00, $3.00, $2.50, $2.50, $2.50, $2.50, $2.50, $2.50, $2.50 ...
Taxable status
for Singapore
;
Always “0”
D6
Taxable 1 status
a
No = 0
Yes = 1
Taxable 2 status
b
No = 0
Yes = 2
Taxable 3 status
c
No = 0
Yes = 4
for Other area
Non tax = 0
Taxable 1 = 1
Taxable 2 = 2
Taxable 3 = 3
TK-3200 Dealer's Manual
Taxable 4 = 4
Taxable 5 = 5
Taxable 6 = 6
Taxable 7 = 7
Taxable 8 = 8
Taxable 9 = 9
Taxable 10 = 10
All taxable = 99
Significant
numbers
:
(a+b+c)
D5
::
D6 D5
89
NINS
Key function/machine feature (P3)
Employee number programming
Programming procedure
To a new (not sequential) record
To the next record
PGM
6 3s 6 : : 61s 6 : ~ : 6a 6 s
Mode switch
Record No.
Program data
Program data
Description
Employee number (0000000001 ~ 9999999999)
90
NINS
Choice
Significant
numbers
Program code
::
D10 D9
~
::
D2 D1
Scheduler programming
Programming procedure
PGM
6 3s 6 : : 62s 6 : ~ : 6 a 6
Record No.
Mode switch
To new record
Program data 1
To the next record
6 : ~ : 6 a 6 : ~ : 6a 6s
Description
Program data 3
Choice
Designate clerk by record number
(“00” means the first record.)
Significant
numbers
Scheduler type 1:
Execute one time = 0, Execute every day = 1, Execute every week = 2
Significant
number
Scheduler type 2:
Execute even if the cash register is in the OFF mode = 0,
Not execute if the cash register is in the OFF mode = 1
Significant
number
Execute kind:
Switch menu shift/price shift = 0, Arrangement = 1, Job command = 2
Significant
number
Wait until the drawer (compulsory drawer) is closed.
Yes = 0
No = 1
Program code
::
D6 D5
:
D4
:
Program 3
Program data 2
Program data 1
D3
:
D2
:
D1
Program data 2
Description
Choice
Program code
• Execute kind: Switch menu shift/price shift
Switch to: 1st menu sheet = 1, 2nd menu sheet = 2, 3rd menu sheet = 3,
4th menu sheet = 4, 5th menu sheet = 5, 6th menu sheet = 6, No change = 0
Significant
number
Switch to:
1st price = 1, 2nd price = 2, 3rd price = 3, No change = 0
Significant
number
:
D2
:
D1
• Execute kind: Arrangement
Significant
numbers
Arrangement table record No.
::::::
D6 D5 D4 D3 D2 D1
• Execute kind: Job command * Refer to the “Job command” table.
Significant
numbers
Job command No.
::::::
D14 D13 D12 D11 D10 D9
Always “00”
;;
Always “0”
;
D8 D7
D6
Significant
numbers
Job command parameter
:::::
D5 D4 D3 D2 D1
Program data 3
Description
Choice
Execute year (00 ~ 99; means 2000 ~ 2099)
Significant
numbers
Execute month (01 ~ 12, “00” means no programming)
Significant
numbers
Execute day or execute day of a week:
Day (01 ~ 31 “00” means no programming)
(Day of a week; Sunday = 00, Monday = 01, Tuesday = 02, Wednesday = 03,
Thursday = 04, Friday = 05, Saturday = 06)
Significant
numbers
Execute hour (00 ~ 23)
Significant
numbers
Execute minute (00 ~ 59)
Significant
numbers
TK-3200 Dealer's Manual
Program code
::
D10 D9
::
D8 D7
::
D6 D5
::
D4 D3
::
D2 D1
91
NINS
Key function/machine feature (P3)
Job command table
Description
Job No.
Group/terminal ID
Parameter
Default menu sheet number after signing on. (D3 of address code 70 of clerk programming)
030770
00
0cddee
Disabled menu sheet number (D2D1 of address code 70 of clerk programming)
030771
00
fgddee
Switching to dual (Euro/local) currency system to Euro only system
200107
00
002002
Batch maintenance activation
074070
00
000000
Format CF card
070270
00
000000
Save programming data to CF card.
070070
00
000ppp
ppp:command code
Load programming data from CF card.
070020
00
000ppp
ppp:command code
Delete file in CF card.
070030
00
000ppp
ppp:command code
c:
f:
g:
dd:
ee:
92
NINS
Input default menu sheet number (0 ~ 6). (This automatically changes the D3 value of address 70 of clerk programming by job command.)
Program restrictive status of menu sheet 1 ~ 3. (This automatically changes the D2 value of address 70 of clerk programming by job command.)
Program restrictive status of menu sheet 4 ~ 6. (This automatically changes the D1 value of address 70 of clerk programming by job command.)
Input the start record number of clerk.
Input the end record number of clerk.
Bottle link table programming
Programming procedure
To a new (not sequential) total
To the next record
PGM
6 3s 6 : : 73s6
Mode switch
Record No.
66
6
MENU
B
6
PLU No.
FlatB
PLU
6 a
6s
+6
Program 3
6 : : : : 04a 6
Record No. (4-digits)
Random code (6-digits)
TK-3200 Dealer's Manual
93
NINS
Key function/machine feature (P3)
I/O parameter table programming
Programming procedure
To a new record
To the next record
PGM
6 3s 6 : : 98s 6 : ~ : 6 a6 s
Record No.
Mode switch
Program data
Note: Please perform the following procedure after this program.
1. Power off the register, and connect all peripheral devices to COM ports.
2. Power on all peripheral devices.
3. Flag clear the register.
Program data (Address 01: for COM 1 port)
Description
International character set number for external printer:
01: France, 02: German, 03: U.K., 04: Denmark(1), 05: Sweden,
06: Italy, 07: Spain(1), 09: Norway, 10: Denmark(2)
International character set page number for external printer:
0000: Multilingual + Euro, 0002: Multilingual, 0003: Portuguese,
0004: Canadian French, 0005: Nordic
Choice
Significant
numbers
Significant
numbers
Program code
::
D16 D15
::::
D14 D13 D12 D11
;;;;
Always“0000”
D10 D9 D8 D7
Significant
numbers
::
PC/ECR direct connection = 00, MODEM = 30,
External printer (as external printer 1 in printer connection table) = 80,
External printer (as external printer 2 in printer connection table) = 81
Significant
numbers
::
Baud rate:
Refer to the baud rate/device table.
Significant
number
:
External printer:
UP-360 = 00
Connected device:
D6 D5
D4 D3
D2
;
Always“0”
D1
Program data (Address 02: for COM 2 port)
Description
International character set number for external/slip printer:
01: France, 02: German, 03: U.K., 04: Denmark(1), 05: Sweden,
06: Italy, 07: Spain(1), 09: Norway, 10: Denmark(2)
Choice
Significant
numbers
Program code
::
D16 D15
International character set page number for external/slip printer:
For SP-1300:
0000: Multilingual + Euro, 0002: Multilingual, 0003: Portuguese,
0004: Canadian French, 0005: Nordic, 0006: Slavic, 0007: Cyrillic,
0008: Turkish, 0009: Windows code page
Significant
numbers
For UP-360:
::::
D14 D13 D12 D11
0000: Multilingual + Euro, 0002: Multilingual, 0003: Portuguese,
0004: Canadian French, 0005: Nordic
;;;;
Always“0000”
External printer/slip printer/scanner:
• External printer (D4D3 = 80, 81): UP-360 = 00
• Slip printer (D4D3 = 70): SP-1300 = 00
• Scanner (D4D3 = 20): HHS-15 = 00, Quick Scan 6000 = 01
Connected device:
Scanner = 20, Slip printer = 70,
External printer (as external printer 1 in printer connection table) = 80,
External printer (as external printer 2 in printer connection table) = 81
Baud rate:
Refer to the baud rate/device table.
Always“0”
D10 D9 D8 D7
Significant
numbers
Significant
numbers
Significant
number
::
D6 D5
::
D4 D3
:
D2
;
D1
94
NINS
Reference (Baud rate/device table)
Device
Default baud rate
Other selection
Scanner (HHS-15)
2400bps (D2 = 0)
9600bps (D2 = 2)
4800bps (D2 = 3)
Scanner (Quick Scan 6000)
9600bps (D2 = 0)
4800bps (D2 = 3)
2400bps (D2 = 4)
External printer (UP-360)
9600bps (D2 = 0)
19200bps (D2 = 1)
Slip printer (SP-1300)
9600bps (D2 = 0)
None
MODEM
19200bps (D2 = 0)
9600bps (D2 = 2)
PC/ECR direct connection
19200bps (D2 = 0)
None
Program 3
4800bps (D2 = 3)
Printer connection table programming
Programming procedure
PGM
To a new record
To the next record
6 3s 6 : : 93s 6 : ~ : 6 a6 s
Mode switch
Record No.
Program data
Program data
Description
Printout type:
Receipt (1) = 00, Receipt (2) = 01, Receipt (3) = 02,
Report = 10, Order (1) = 20, Order (2) = 21, Order (3) = 22
Choice
Significant
numbers
TK-3200 Dealer's Manual
D10 D9
D8 D7
Significant
numbers
::
D6 D5
;;
Always “00”
Printout destination (Backup):
R/J printer = 00, External printer 1 = 01, External printer 2 = 02
::
;;
Always “00”
Printout destination (Main):
R/J printer = 00, External printer 1 = 01, External printer 2 = 02
Program code
D4 D3
Significant
numbers
::
D2 D1
95
NINS
Key function/machine feature (P3)
Non PLU table programming
To a new record
To the next record
Programming procedure
6 3s 6 : : 40s 6 : ~ : 6 a6 s
PGM
Program data
Record No.
Mode switch
Program data
Description
Choice
Program code
:
Significant
number
Non PLU type: Short version = 0, Long version = 1
D16
:
No = 0
Yes = 1
Price check digit is included in the price field.
Price × 10 n
Significant
number
Number of digits for price
Significant
number
D15
:
D14
:
D13
;;;;;;;
Always “0000000”
D12 D11 D10 D9 D8 D7 D6
Number of digits for scanning PLU search code
Significant
number
Flag code:
Number of digits for flag (1 ~ 3)
Significant
number
Flag code:
Actual value
Significant
numbers
:
D5
:
D4
:::
D3 D2 D1
Program sample
• Long version barcode (with price check digit)
F1
F2
I1
I2
Flag
I3
I4
Item code
I5
P/C
P1
Price check digit
P2
P3
Price
P4
C/D
Check digit
Program code: 1005000000072F1F20
• Long version barcode (without price check digit)
F1
F2
F3
I1
Flag
I2
I3
I4
P1
P2
Item code
Price
Program code: 1105000000073F1F2F3
• Short version barcode
F1
Flag
F2
I1
I2
Item code
P1
P2
96
NINS
P3
C/D
Price (x 10) Check digit
Program code: 0013000000042F1F20
P3
P4
P5
C/D
Check digit
Scanning PLU maintenance programming
Batch maintenance PLU programming
Programming procedure
A
Proceeds the next
vacant record.
63s 6 0070s 6 : ~ : 6a 6
PGM
Record No. (001 ~ 999)
Mode switch
*1
{
B
OBR
Scanning
NLU
B
Action code
}
Add/
Modify
Unit price/quantity
Delete
6
{
}
a
Link-#
DEPT
B
6
6 :
6 : ~ : 6a6
6
B
*1
: 6 a 6 : ~ : 6a 6
~
Status
Character
*1
*1
Program 3
PRICE
6
6 : 6 a6B
SHIFT
Code
*1
B
A
6 : ~ : 6a 6 : ~ : 6a 6 : : 6 a 6 s
*1
Bottle link
Mix & match
*1
*1
Optimum stock
*1
Skip by general function programming address code 33.
Activation of batch maintenance PLU
Activation procedure
PGM
6 3s 6 4070s 6
Mode switch
TK-3200 Dealer's Manual
a
Activation
s
Cancellation
97
NINS
Key function/machine feature (P3)
Scanning PLU direct maintenance programming
A
Programming procedure
63s 6 0071s 6
PGM
Mode switch
6 : 6 a6B 6
PRICE
SHIFT
{
Action code
6
{
Link-#
B
DEPT
a
}
OBR
B
Code
Scanning
NLU
B
6 :
6
*1
}
6 : ~ : 6a6
6
Unit price/quantity *1
: 6 a 6 : ~ : 6a 6
~
Character
Status
*1
*1
A
6 : ~ : 6a 6 : ~ : 6 a 6 :
Bottle link
*1
Mix & match
*1
: 6 a 6 s
Optimum stock
*1
98
NINS
*1
Skip by general function programming address code 32.
Scanning PLU individual programming
Programming procedure
PGM
0170 (Batch maintenance)
6 3s 6 0171 (PLU direct)
s6
Mode switch
B
6 : : 66 6 s 6 B 6
PRICE
SHIFT
Address code
{
OBR
Code B
Scanning
B
NLU
}
6
6
B
6 :
: 6 a 6
~
Character
Address code 11:
link programming
6
{
Link-#
B
DEPT
a
s
Program 3
Address code 22:
character programming
B
}
6
6
s
B
Address code 13,20,21,23:
6
other programming
:
~
:
6 a 6
s
Program data
TK-3200 Dealer's Manual
99
NINS
Key function/machine feature (P3)
Program data
Action code
Description
Action code:
Addition = 0
Modification = 1
Deletion = 2 (Not effective for direct PLU maintenance)
Choice
Program code
:
Significant
number
D1
Unit price/quantity (Address code 21 for individual feature programming)
Description
Choice
Integer part
(0000 ~ 9999)
Unit quantity (0.01 ~ 9999.99)
Decimal part
(00 ~ 99)
Significant
numbers
Unit price (000000 ~ 999999)
Program code
::::
D12 D11 D10 D9
::
D8 D7
::::::
D6 D5 D4 D3 D2 D1
Link-# (Address code 11 for individual feature programming)
Description
Choice
Link group record No. (00 ~ 99)
Significant
numbers
Link department record No. (00 ~ 99)
Significant
numbers
Program code
::
D4 D3
::
D2 D1
Bottle link (Address code 13 for individual feature programming)
Description
Bottle link record No. (0000 ~ 9999)
Choice
Significant
numbers
Program code
::::
D4 D3 D2 D1
Optimum stock (Address code 14 for individual feature programming)
Description
Optimum stock quantity (0.001 ~ 99.999)
Enter without decimal point.
Choice
Significant
numbers
Program code
:::::
D5 D4 D3 D2 D1
Mix & match (Address code 20 for individual feature programming)
Description
Link mix & match record No. (00 ~ 99)
100
NINS
Choice
Significant
numbers
Program code
::
D2 D1
Status (Address code 23 for individual feature programming)
Description
Choice
Program code
::
Significant
numbers
Taxable status:
See below. (In case of “00”, follow the linked department taxable status.)
D6 D5
Always “0”
;
Always “0”
:
D4
D3
a
No = 0
Yes = 1
Enable negative price.
(Use this bit to change the status with that of the linked department.)
b
No = 0
Yes = 2
Hash
(Use this bit to change the status with that of the linked department.)
c
No = 0
Yes = 4
Permit price change operation
(Use this bit to change the status with that of the linked department.)
a
No = 0
Yes = 1
Permit multiplication operation
(Use this bit to change the status with that of the linked department.)
b
No = 0
Yes = 2
Price input compulsory
(Use this bit to change the status with that of the linked department.)
c
No = 0
Yes = 4
:
(a+b+c)
D2
:
Program 3
Enable 0 unit price.
(Use this bit to change the status with that of the linked department.)
(a+b+c)
D1
Taxable status
for Singapore
;
Always “0”
D6
Taxable 1 status
a
No = 0
Yes = 1
Taxable 2 status
b
No = 0
Yes = 2
Taxable 3 status
c
No = 0
Yes = 4
for Other area
Non tax = 0
Taxable 1 = 1
Taxable 2 = 2
Taxable 3 = 3
Taxable 4 = 4
Taxable 5 = 5
Taxable 6 = 6
Taxable 7 = 7
Taxable 8 = 8
Taxable 9 = 9
Taxable 10 = 10
:
(a+b+c)
D5
::
Significant
numbers
D6 D5
One touch NLU programming
Programming procedure
To the next record
PGM
63s 6 : ~ : 77s 6
Mode switch
TK-3200 Dealer's Manual
Rec No. (up to 3 digits)
{
Code
OBR
B
Scanning
}
NLU
6B
6s
101
NINS
Key function/machine feature (P3)
Issuing program reading report of program 3 mode
Issuing procedure
PGM
63s 6 s
Mode switch
Report sample
P03 ....................
CHECK
CREDIT2
PD
DEPT01
11-66
15-66
16-66
17-66
DEPT02
C01
67
68
69
70
C02
0001-05
00000000000000
000000
@1.23
000000
00
0002-05
—
—
—
—
—
—
0001-07
000001000001
0000000000
00000000
000000000000
0000000000
0002-07
—
—
—
—
—
—
Clerk program
Clerk name/rec-#/file-#
Clerk #/drw-#/secret-#
Compulsory
Commission rate
Check # range
Operation restriction
00:00 -> 01:00
01:00 -> 02:00
02:00 -> 03:00
0001-22
0002-22
0003-22
2200000000
0000000000
0000000000
102
— Transaction key program
— Key character/rec-#/file-#
— Key program
Department program
Key character/rec-#/file-#
Key program
Batch program 1166
Batch program 1566
Batch program 1666
Batch program 1766
0001-09
0002-09
0003-09
0001-25
TX1
TX1
TX1
NINS
0001-02
00000000000000
0002-02
00000000000000
0003-02
00000000000000
— Program read symbol
BATCH02
01
0001-30
GROSS
0002-30
NET
0001-38
REG1
1
2
DEPT01
CASH
0002-38
CSHR01
CSHR02
0001-62
— Time range program
0002-62
— General control program
— Tax table
10.25%
0000
5003
BATCH01
00
MC#01
0001-29
11-12-17-15-00
00-00-00-00-00
0002-29
11-12-17-15-00
00-00-00-00-00
— Batch X/Z program
— Clerk detail link program
0001-01
0002-01
000001
204-000
001-000
002-000
026-051
013-001
0001-061
0000000000
0002-061
000000
00000000000000
0000000000
000000
000000000000
0001-91
1001
0001-93
0002-93
000000
100000
0001-98
0002-98
00000000000000
00000000000000
Arrangement program
— Rec-#/file-#/arrange no.
— Key descriptor/rec-#/file-#
— Employee program
— Scheduler program
— Terminal connection table
— Printer connection table
— I/O parameter table
Character (Program 2)
Programming descriptors
To other address code
To the next address code
Programming procedure
Rec No.
File No.
6 2s 6 : ~ : : : s 6 Character 6 a 6 s
☞ See “Entering characters” section.
Address code
PGM
Mode switch
Programming data
Fixed totalizer (up to 12 characters)
0101
0201
0301
0401
0501
0601
0701
0801
0901
1001
1101
1201
1301
1401
1501
1601
1701
1801
1901
2001
2101
2201
2301
2401
2501
2601
2701
2801
2901
3001
3101
3201
3301
3401
3501
3601
3701
3801
3901
4001
4101
4201
4301
4401
4501
4601
4701
4801
4901
5001
5101
Contents
Gross sales total
Net sales total
Cash in drawer
Cash declared amount
Declared short cash amount
Declared over cash amount
Charge in drawer
Charge declared amount
Declared short charge amount
Declared over charge amount
Check in drawer
Check declared amount
Declared short check amount
Declared over check amount
Credit 1 in drawer
Credit 2 in drawer
Credit 3 in drawer
Credit 4 in drawer
Credit declared amount
Declared short credit amount
Declared over credit amount
Cash in drawer *
Cash declared amount *
Declared short cash amount *
Declared over cash amount *
Charge in drawer *
Charge declared amount *
Declared short charge amount *
Declared over charge amount *
Check in drawer *
Check declared amount *
Declared short check amount *
Declared over check amount *
Credit 1 in drawer *
Credit 2 in drawer *
Credit 3 in drawer *
Credit 4 in drawer *
Credit declared amount *
Declared short credit amount *
Declared over credit amount *
(not used)
(not used)
(not used)
(not used)
Refund mode total
Customer count
Average sales per customer
Check cashing service fee
New balance fee
(not used)
Clerk commission 1 total
TK-3200 Dealer's Manual
Initial character
GROSS
NET
CAID
CATL
CACA+
CHID
CHTL
CHCH+
CKID
CKTL
CKCK+
CRID(1)
CRID(2)
CRID(3)
CRID(4)
CRTL
CRCR+
CAID2
CATL2
CA- 2
CA+ 2
CHID2
CHTL2
CH- 2
CH+ 2
CKID2
CKTL2
CK- 2
CK+ 2
CRID2(1)
CRID2(2)
CRID2(3)
CRID2(4)
CRTL2
CR- 2
CR+ 2
FSID
FSCACG
EBTTL
EBTCACG
RF
CUST
AVRG
FEE
+
NB
C-1
Address
code
5201
5301
5401
5501
5601
5701
5801
5901
6001
6101
6201
6301
6401
6501
6601
6701
6801
6901
7001
7101
7201
7301
7401
7501
7601
7701
7801
7901
8001
8101
8201
8301
8401
8501
8601
8701
8801
8901
9001
9101
9201
9301
9401
9501
9601
9701
9801
9901
Contents
Clerk commission 2 total
Foreign currency cash in drawer 1
Foreign currency check in drawer 1
Foreign currency cash in drawer 2
Foreign currency check in drawer 2
Foreign currency cash in drawer 3
Foreign currency check in drawer 3
Foreign currency cash in drawer 4
Foreign currency check in drawer 4
Reduction
Coupon
Item return
Clear counter
Rounding 2 *
Rounding 1
Cancellation
Money declaration
Taxable amount
Tax 1
Tax exempt 1
Taxable amount 2
Tax 2
Tax exempt 2
Taxable amount 3
Tax 3
Tax exempt 3
Taxable amount 4
Tax 4
Tax exempt 4
Taxable amount 5
Tax 5
Tax exempt 5
Taxable amount 6
Tax 6
Tax exempt 6
Taxable amount 7
Tax 7
Tax exempt 7
Taxable amount 8
Tax 8
Tax exempt 8
Taxable amount 9
Tax 9
Tax exempt 9
Taxable amount 10
Tax 10
Tax exempt 10
Nontaxable amount
Initial character
C-2
CECA1
CECK1
CECA2
CECK2
CECA3
CECK3
CECA4
CECK4
DC
COUPON
REF
CLEAR
ROUND
ROUND
CANCEL
DECLA
TA1
TX1
EX1
TA2
TX2
EX2
TA3
TX3
EX3
TA4
TX4
EX4
TA5
TX5
EX5
TA6
TX6
EX6
TA7
TX7
EX7
TA8
TX8
EX8
TA9
TX9
EX9
TA10
TX10
EX10
NON TAX
Program 2
Address
code
* Totalizers for sub currency
103
NINS
Character programming (P2)
Group character
Up to 12 characters
Address
code
0106
0206
0306
:
9906
Contents
Initial character
GROUP01
GROUP02
GROUP03
:
GROUP99
Group 01
Group 02
Group 03
:
Group 99
Clerk character
Up to 12 characters
Address
code
Contents
0107
0207
0307
:
9907
Clerk 01
Clerk 02
Clerk 03
:
Clerk 99
Initial character
C01
C02
C03
:
C99
Table analysis character
Up to 12 characters
Address
code
0118
0218
0318
:
9918
Contents
Table 01
Table 02
Table 03
:
Table 99
Initial character
TBL01
TBL02
TBL03
:
TBL99
Grand total character
Up to 12 characters
Address
code
0120
0220
0320
104
NINS
Contents
Grand total 01
Grand total 02
Grand total 03
Initial character
GT1
GT2
GT3
Special character
0123
0223
0323
0423
0523
0623
0723
0823
0923
1023
1123
1223
1323
1423
1523
1623
1723
1823
1923
2023
2123
2223
2323
2423
2523
2623
2723
2823
2923
3023
3123
3223
3323
3423
3523
3623
3723
3823
3923
4023
4123
4223
4323
4423
4523
4623
4723
4823
4923
Contents
main currency symbol (2), @ (2), No. (2), split pricing (2), not used (1)
training filler (1), training symbol (1), not used (1), sub currency symbol (2)
No. of item sold (2), No. of customer (2), not used (2),
not used (2), new price (2), multiplication display (2)
multiplication (6) check in use (6)
taxable symbol 1 (3 each) for tax 1, tax 2, tax 3, tax 4, tax 5
taxable symbol 2 (3 each) for tax 6, tax 7, tax 8, tax 9, tax 10
taxable symbol 3 (3 each) for tax 1/2, tax 1/3, tax 1/4, not used, tax 2/3
taxable symbol 4 (3 each) for not used, not used, not used, nontax, all, F/S
foreign currency (2 each), character edit mode (INS/OVR) (4 each)
mode symbol 1 (4 each) REG1/2, RF, REG–
mode symbol 2 (4 each) PGM, Daily X, Daily Z, Periodic
mode symbol 3 (4 each) training, not used, PGM read
decimal: amount/q’ty, separator (main/sub) (1 each), not used (3), square (7)
A.M., P.M. (3 each), ST displayed on the dot display (2)
slip continued (12), page (2)
(not used)
display subtotal symbol (ST key) (16)
subtotal symbol (16)
total symbol (16)
change symbol (16)
check cashing fee (16)
check cashing amount (16)
Bon message (12)
break (16)
check No. (10)
service total (16)
item discount total (16)
scale manual entry (12)
(not used)
report total symbol (12)
report old price symbol (16)
red price symbol (16)
(not used)
table No. symbol (10)
future order message (16)
declared amount (16)
entering child item in separate check or void item in previous item void operation
current stock (16)
last stock (16)
added stock (16)
reviewing (16)
end of transaction (16)
designating sub currency (16)
Element title 1 of CF X/Z report (16)
Element title 2 of CF X/Z report (16)
Element title 3 of CF X/Z report (16)
Element title 4 of CF X/Z report (16)
Element title 5 of CF X/Z report (16)
Element title 6 of CF X/Z report (16)
Element title 7 of CF X/Z report (16)
TK-3200 Dealer's Manual
Initial character
• @No/
**
⁄
NoCT@ LB *QT
X
BUSY
T1 T2 T3 T4 T5
T6 T7 T8 T9 T10
T12T13T14
T23
F
* * * *
*
REG R F R PnX
Z
XZ
TRG
PGMX
..,..,
X
AM PM ST
CONTINUED
P
Program 2
Address
code
ST
ST
TL
CG
CACG
** STUB **
**BREAK END**
CHECK No.
SRVC TL
DISCOUNT
MANUAL ENTRY
TL
OLD PRC
RED PRC
FSCG
TABLE No.
**Future Order**
DECLA
Sub item ?
STK(NEW)
STK(OLD)
STK(ADD)
** REVIEW **
* END **
EURO money
RECORD
DESCRIPTOR
QUANTITY/No
QUANTITY
No
AMOUNT
DISCOUNT
105
NINS
Character programming (P2)
Address
code
5023
5123
5223
5323
5423
5523
5623
5723
5823
5923
6023
6123
6223
6323
6423
6523
6623
6723
6823
6923
7023
7123
7223
7323
7423
7523
7623
7723
7823
7923
8023
8123
8223
106
NINS
Contents
element title 8 of CF X/Z report (16)
element title 9 of CF X/Z report (16)
element title 10 of CF X/Z report (16)
element title 11 of CF X/Z report (16)
element title 12 of CF X/Z report (16)
element title 13 of CF X/Z report (16)
element title 14 of CF X/Z report (16)
element title 15 of CF X/Z report (16)
element title 16 of CF X/Z report (16)
element title 17 of CF X/Z report (16)
element title 18 of CF X/Z report (16)
element title 19 of CF X/Z report (16)
element title 20 of CF X/Z report (16)
element title 21 of CF X/Z report (16)
element title 22 of CF X/Z report (16)
element title 23 of CF X/Z report (16)
element title 24 of CF X/Z report (16)
element title 25 of CF X/Z report (16)
element title 26 of CF X/Z report (16)
element title 27 of CF X/Z report (16)
element title 28 of CF X/Z report (16)
element title 29 of CF X/Z report (16)
element title 30 of CF X/Z report (16)
model name 1 of CF X/Z report (16)
not used (16)
header title 1 of CF X/Z report (16)
header title 2 of CF X/Z report (16)
header title 3 of CF X/Z report (16)
header title 4 of CF X/Z report (16)
header title 5 of CF X/Z report (16)
header title 6 of CF X/Z report (16)
header title 7 of CF X/Z report (16)
header title 8 of CF X/Z report (16)
Initial character
OLD AMOUNT
RED AMOUNT
STOCK
CUSTOMER
GROSS AMOUNT
NET No
NET AMOUNT
GROSS QUANTITY
No of DISCOUNT
DISCOUNT AMOUNT
RANDOM CODE
OBR CODE
CLOCK IN DATE
CLOCK IN TIME
CLOCK OUT DATE
CLOCK OUT TIME
WORKING TIME
EMPLOYEE NAME
EMPLOYEE No
CLERK
START TIME
END TIME
PRICE SHIFT
TK-3200
MODEL
MACHINE
REPORT
FILE
MODE
Z COUNTER
DATE
TIME
Message
Up to 24 characters
Address
code
Contents
Initial character
YOUR
RECEIPT
1st line of logo message
0232
2nd line of logo message
THANK
0332
3rd line of logo message
CALL
0432
4th line of logo message
0532
1st line of commercial message
0632
2nd line of commercial message
0732
3rd line of commercial message
0832
4th line of commercial message
0932
1st line of bottom message
1032
2nd line of bottom message
1132
3rd line of bottom message
1232
4th line of bottom message
1332
1st line of bill top message
1432
2nd line of bill top message
1532
3rd line of bill top message
1632
4th line of bill top message
1732
1st line of bill copy message
1832
2nd line of bill copy message
1932
3rd line of bill copy message
2032
4th line of bill copy message
2132
1st line of bill bottom message
2232
2nd line of bill bottom message
2332
3rd line of bill bottom message
2432
4th line of bill bottom message
2532
Post receipt message
2632
1st line of guest intermediate message
2732
2nd line of guest intermediate message
2832
3rd line of guest intermediate message
2932
4th line of guest intermediate message
3032
1st line of guest bottom message
3132
2nd line of guest bottom message
3232
3rd line of guest bottom message
3332
4th line of guest bottom message
3432
5th line of guest bottom message
3532
6th line of guest bottom message
3632
7th line of guest bottom message
3732
8th line of guest bottom message
3832
9th line of guest bottom message
3932
10th line of guest bottom message
4032
1st line of Australian GST MOF message
4132
2nd line of Australian GST MOF message
4232
3rd line of Australian GST MOF message
YOU
AGAIN
Program 2
0132
TK-3200 Dealer's Manual
Yours
DUPLICATE RECEIPT
TAX
INVOICE
* INDICATES
TAXABLE SUPPLY
107
NINS
Character programming (P2)
Report header
Up to 12 characters
Address
code
0124
0224
0324
0424
0524
0624
0724
0824
0924
1024
1124
1224
1324
1424
1524
1624
1724
1824
1924
2024
2124
2224
2324
2424
2524
2624
2724
Contents
Fixed totalizer report
Transaction key report
PLU report
Department report
Group report
Cashier/clerk report
Not used
Hourly sales report
Monthly sales report
Not used
Table analysis report
Open check report
Scanning PLU
Hourly item
PLU stock report
Financial report
Mix & match
PLU by amount
PLU by quantity
Department by amount
Department by quantity
Scanning PLU best
Inactive scanning PLU
Individual item
Not used
Time & attendance
Scanning PLU stock
Initial character
FIX
TRANS
PLU
DEPT
GROUP
CASHIER
HOURLY
MONTHLY
SUB DEPT
ANALYSIS
OPEN CHK
SCAN PLU
HOURLY ITEM
PLU STOCK
FLASH
MIX&MATCH
PLU AMT
PLU QTY
DEPT AMT
DEPT QTY
PLU BEST
NON ACTIVE
INDIVIDUAL
NFP
ATTENDANCE
SCAN STOCK
Batch X/Z header
Up to 12 characters
Address
code
0129
0229
0329
:
1029
Contents
Initial character
BATCH
BATCH
BATCH
:
BATCH
Batch 01
Batch 02
Batch 03
:
Batch 10
01
02
03
10
Check endorsement message
Up to 40 characters
Address
code
0133
0233
0333
0433
108
NINS
Contents
Check endorsement message 01
Check endorsement message 02
Check endorsement message 03
Check endorsement message 04
Initial character
Slip/external printer message
Up to 40 characters (Contents are the same as file032.)
Address
code
0134
0234
0334
:
4134
Contents
Slip/external printer message 01
Slip/external printer message 02
Slip/external printer message 03
:
Slip/external printer message 41
Initial character
YOUR RECEIPT
THANK YOU
CALL AGAIN
:
* INDICATES TAXABLE SUPPLY
Recall character message
Up to 40 characters
Address
code
Contents
Initial character
Recall character 01
Recall character 02
Recall character 03
:
Recall character 999
Program 2
0139
0239
0339
:
99939
Mix & match character
Up to 12 characters
Address
code
0151
0251
0351
:
9951
Contents
Mix & match 01
Mix & match 02
Mix & match 03
:
Mix & match 99
Initial character
DISCOUNT01
DISCOUNT02
DISCOUNT03
:
DISCOUNT99
Employee character
Up to 12 characters
Address
code
0161
0261
0361
:
9961
Contents
Initial character
CSHR01
CSHR02
CSHR03
:
CSHR99
Employee 01
Employee 02
Employee 03
:
Employee 99
Help message
Up to 24 characters
Address
code
00185
00285
00385
:
19985
Contents
Help message 001
Help message 002
Help message 003
:
Help message 199
TK-3200 Dealer's Manual
Initial character
ENTER NUMBER THEN
PRESS <HELP> KEY.
:
109
NINS
Character programming (P2)
Terminal connection table
Up to 8 characters
Address
code
0191
Contents
Physical No. 01
Initial character
MC#01
AT command
Up to 62 characters
Address
code
0196
0296
Contents
Command set to MODEM
on hook, confirmation
Initial character
AT COMMAND****
ATA
ATI4
***
Error message
Up to 16 characters
Address
code
Contents
0180
0280
0380
:
23880
Mode switch position changed before…
Wrong operator
Error INIT/FC
:
Flash memory format is illegal.
Initial character
WRONG MODE
WRONG OPERATOR
ERROR INIT/FC
:
ILLEGAL FORMAT
Miscellaneous message
Up to 16 characters
Address
code
0178
0278
0378
:
5878
Contents
Register total working time
Register start date message
RAM message in PGM5
:
Model name
Initial character
GT TIME
START DATE
RAM
:
Printing guidance message
Up to 24 characters
Address
code
0179
0279
0379
:
8779
Contents
not used
not used
not used
:
CF card data save
Initial character
:
CF CARD Error End
✍ Version 1.01
110
NINS
X/Z guidance message
Up to 16 characters
Address
code
Contents
0182
0282
0382
:
7282
PLU range report message 1st line
Input start No. message 1st line
Input start No. message 2nd line
:
Busy reset
Initial character
-PLU BY RANGEINPUT START NO
AND PRESS <CA>
:
AND PRESS <CA>
Program guidance message
Up to 16 characters
Contents
0183
0283
Range program message 1st line
Input start No. message 1st line
0383
:
11583
Input start No. message 2nd line
:
Initial character
-RANGE PGMINPUT START NO
AND PRESS <#1>
:
Program 2
Address
code
Registration guidance message
Up to 16 characters
Address
code
0181
0281
0381
:
2081
Contents
Guidance message of NFP 1st line
Guidance message of NFP 2nd line
Guidance message of NFP 3rd line
:
Guidance message of scan PLU search
Initial character
-NOT FOUND PLUINPUT UNIT PRICE
,AND PRESS DEPT
:
SEARCHING
Online password
Up to 8 characters
Address
code
0197
Contents
Initial character
Online password
✍ Version 1.01
TK-3200 Dealer's Manual
111
NINS
Character programming (P2)
Programming item/key descriptors
Programming procedure
Department key/transaction key
To another department/transaction key
6 2s 6
PGM
Mode switch
Department key
6
Characters
☞ See “Entering
Transaction key
6 s
characters” section.
PLU
To a new (not sequential) PLU
To the next PLU
PGM
6 2s 6
PLU No.
+6
a 6s
Characters
☞ See “Entering characters” section.
(Rec No,: 4 digits)
(Random code: 6 digits)
Mode switch
Flat-PLU key
To another flat-PLU key
6 2s 6
PGM
Characters
6
MENU
B
SHIFT
or
6
turnover
sheet holder
Mode switch
☞ See “Entering characters” section.
Programming data
Department
up to 16 characters
Contents
Initial character
DEPT01
DEPT02
DEPT03
:
DEPT99
Department 01
Department 02
Department 03
:
Department 99
PLU/flat-PLU
up to 16 characters
PLU No.
0001
0002
0003
:
5000
112
NINS
Contents
PLU 0001
PLU 0002
PLU 0003
:
PLU 5000
Initial character
PLU0001
PLU0002
PLU0003
:
PLU5000
Flat-PLU key
6s
Function
Add check
Arrangement
Birth date
Bill copy
Bottle return
Cancel
Cash amount tendered
Charge
Check endorsement
Check print
Check tender
Clerk number
Clock-in/out
Coupon
Coupon 2
Credit
Cube
Currency exchange
Customer number
Date/Time
Decimal point
Declaration
Department
Deposit
Discount
Eat-in
Enter
Error correct
Flat PLU *
Help
Ketten Bon
Loan
Lock out unused key
Manual tax
Media change
Menu shift
Merchandise subtotal
Minus
Multiplication/Date/Time
Multiplication
New balance
New check
New/old check
No sale
Non-add
Non-add/No sale
Normal receipt
OBR
Code
094
044
047
053
236
001
002
039
012
003
072
108
023
036
004
090
045
043
101
098
061
nn051
025
028
128
105
034
nnnn063
141
113
019
000
032
118
064
080
027
082
100
006
091
093
042
040
041
016
103
TK-3200 Dealer's Manual
Initial character
ADD CHK
ARG
BILL
BR
CANCEL
CASH
CHARGE
CK.E
CHKP
CHECK
CLK#
CLOCK-IN/OUT
COUPON
CPN2
CREDIT
XXX
CE
CT
DATE/TIME
.
DECLA
DEPTnn
DEPOSIT
%
EAT-IN
ENT
CORR
PLUnnnn
HELP
X/KETTEN
LOAN
TAX
MEDIA CHG
MENU
MDST
X
X
NB
NEW CHK
NEW/OLD
NS
#
#/NS
NRMRCT
OBR
Function
Old check
One touch NLU
Open
Open2
Open check
Operator read/reset
Paid out
Pick up
Plus
PLU
Previous balance
Previous balance subtotal
Premium
Price
Price change
Price inquiry
Price shift
Quantity/for
Rate tax
Recall
Receipt
Receipt on/off
Received on account
Red price
Refund
Review
Separate check
Slip back feed/release
Slip feed/release
Slip print
Square
Stock inquiry
Store
Subtotal
Table number
Takeout
Tax exempt
Tax status shift
Taxable amount subtotal
Text print
Text recall
Three zero
Tip
Tray total
Two zero
Validation
VAT
Void
Code
092
138
067
068
117
073
021
022
029
048
026
079
030
049
104
008
069
083
031
131
038
076
020
060
033
071
095
054
056
055
084
009
130
075
058
129
062
057
077
011
010
097
015
074
096
037
046
035
Initial character
OLD CHK
NLU
OPEN
OPEN2
OPEN CHK
OPE X/Z
PD
P.UP
+
PLU#
PB
PBST
%+
PRC
PRC CHG
PRCINQ
PRICE SHIFT
QT
TAX
RECALL
RCT
RCT ON/OFF
RC
RED
RF
REVIEW
SEP CHK
SB/R
SF/R
SLIP
XX
STKINQ
STORE
SUBTOTAL
TBL#
TAKE-OUT
EXEMPT
T/S
TAST
PRT
CHAR
000
TIP
TRAY TL
00
VLD
VAT
VOID
113
NINS
Program 2
Transaction key
Up to 12 characters
Character programming (P2)
Programming item/clerk descriptors by range
Programming procedure
PGM
6 2s 6 990000 : : s 6
Mode switch
Department = 05
PLU/flat-PLU = 04
Starts “0001”.
}
Ends “the last record”.
6 : ~ : 6 a6 : ~ : 6 a 6 : ~: a 6s
Start rec-#
(Max. 4 digits)
End rec-#
(Max. 4 digits)
Program data
Department
up to 16 characters
Contents
Initial character
DEPT01
DEPT02
DEPT03
:
DEPT99
Department 01
Department 02
Department 03
:
:
Department 99
PLU/flat-PLU
up to 16 characters
PLU No.
0001
0002
0003
:
5000
114
NINS
Contents
PLU 0001
PLU 0002
PLU 0003
:
PLU 5000
Initial character
PLU0001
PLU0002
PLU0003
:
PLU5000
Program data
(character)
Entering characters
By character keyboard
RECEIPT
FEED
JOURNAL
FEED
2
3
7
Â
â
009
Á
á
006
7
8
Q
9
4
5
1
0
2
9 0
00
6
3
•
q
A
#-2
a
B
#-1
002
Ö
ö
2
@
W
z
S
w
s
012
X
Û
Ú
Î
ú
Í
x
E
021
C
011
020
010
019
È
Ë
033
#
4
5
032
e
r
d
c
030
V
f
t
v
Ñ
6
ñ
^
b
Y
y
049
H
h
048
N
u
n
063
Ã
071
060
7
8
059
U
u
057
M
*
i
m
K
k
<
0
o
075
l
>
084
/
065
074
083
028
037
046
055
064
073
082
3 Right cursor key
Move the cursor to the right one by one to modify characters.
4 Double size letter key
Specifies that the next character you enter a double size
character.
You must press this key before each double size character.
5 Space key
Set a space by depression.
6 CAP key
Pressing this key shifts the character to the uppercase letter.
105
_
=
095
p
[
085
;
056
Move the cursor to the left one by one to modify characters.
106
096
-
)
086
P
047
2 Left cursor key
097
087
(
076
.
107
±
_
L
066
,
”,
- .
'
077
O
067
j
098
088
¤
078
9
068
I
058
J
>>
e
108
ß
079
¢
069
&
089
¬
<<
c
¡
038
Pressing this key shifts the character from the uppercase
letter to lower case letter and vice versa.
i
“i” “c” “e”
¿
099
º
080
070
õ
ƒ
090
ª
y
061
Õ
£
081
ÿ
ã
062
Y
ø
072
029
1 Shift key
7 Alphabet keys
g
039
B
æ
050
040
G
Æ
051
%
041
031
F
å
052
ë
T
Å
Ø
ç
053
è
042
$
R
é
043
ï
Ç
054
044
ì
Ï
022
D
É
034
ü
ê
045
í
Ì
024
3
Ê
035
ù
025
Ü
î
036
026
Ù
5
6CAP 1
SHIFT
001
û
027
023
013
003
Z
ò
014
004
A
Ò
015
!
005
8
ó
016
ä
1
C
Ó
017
à
007
Ä
ô
018
008
À
Ô
J
“CAP”“J” “SHIFT”“u”
{
094
'
:
093
?
+
104
]
}
103
"
\
`
~
102
•
¥
092
101
OVR/INS
DBL
091
100
C 4
8 Numeric keys
Use those keys to enter program codes, memory number
and character codes.
9 Character fixed key
Press this key to fix all entered characters before you assign
them to function keys, PLUs, department keys and so on.
0 Backspace/Character code fixed key
Registers one character with code (2 or 3 digit).
Clears the last entered character, much like a back space
key.
A Program end key
Terminates the character programming.
B Character enter key
Registers the programmed characters.
C Insert/Override key
Press this key to change the status “Insert” between the
original characters or “Override” the original characters.
Use those keys to enter characters.
TK-3200 Dealer's Manual
115
NINS
Program 2
Example:
Input “
A
p
p l e
enter “DBL”“A” “SHIFT”“p” “p” “l” “e” “SPACE”
Character programming (P2)
By character code
Every time you enter a character, choose character codes by the character code list (below) and press the ^
key to settle it. After you complete entering characters, press the - key to fix them.
Example:
A
p
p
l
e
J
u
i
c
e
Input “
enter “ 255^65^ 112^ 112^ 108^ 101^ 32^ 74^ 117^ 105^ 99^ 101^ -
Character code list
Chara
Chara
Code
Chara
Code
32
0
48
@
64
P
80
!
33
1
49
A
65
Q
81
"
34
2
50
B
66
R
82
#
35
3
51
C
67
S
$
36
4
52
D
68
%
37
5
53
E
&
38
6
54
'
39
7
(
40
)
Chara
Code
Chara
Code Chara
Code
96
p
112
Ç
128
a
97
q
113
ü
129
b
98
r
114
é
130
83
c
99
s
115
â
131
T
84
d
100
t
116
ä
132
69
U
85
e
101
u
117
à
133
F
70
V
86
f
102
v
118
å
134
55
G
71
W
87
g
103
w
119
ç
135
8
56
H
72
X
88
h
104
x
120
ê
136
41
9
57
I
73
Y
89
i
105
y
121
ë
137
*
42
:
58
J
74
Z
90
j
106
z
122
è
138
+
43
;
59
K
75
[
91
k
107
{
123
ï
139
,
44
<
60
L
76
\
92
l
108
|
124
î
140
-
45
=
61
M
77
]
93
m
109
}
125
ì
141
.
46
>
62
N
78
^
94
n
110
~
126
Ä
142
/
47
?
63
O
79
_
95
o
111
127
Å
143
Code Chara
Code
Chara
Chara
Code
Chara
É
144
á
160
176
192
æ
145
í
161
177
193
Æ
146
ó
162
178
ô
147
ú
163
ö
148
ñ
164
ò
149
Ñ
165
û
150
ª
ù
151
ÿ
Code
Code
Code Chara
Code
Ó
224
-
240
D
ß
225
±
241
194
Ê
210
Ô
226
_
242
179
195
Ë
211
Ò
227
3/4
243
180
196
È
212
õ
228
¶
244
Á
181
197
⁄
213
Õ
229
§
245
166
Â
182
ã
198
Í
214
µ
230
÷
246
º
167
À
183
Ã
199
Î
215
p
231
_
247
152
¿
168
©
184
200
Ï
216
P
232
Ö
153
®
169
185
201
217
Ú
233
¨
249
Ü
154
¬
170
186
202
218
Û
234
•
250
ø
155
1/2
171
187
203
219
Ù
235
1
251
£
156
1/4
172
188
204
220
y
236
3
252
Ø
157
¡
173
¢
189
205
|
221
Y
237
2
253
‹
158
«
174
¥
190
206
Ì
222
159
»
175
ı
191
¤
207
208
Chara
209
ƒ
NINS
Code
Space
Chara
116
Code Chara
223
248
238
239
254
Double
sized
255
”,
”
Editing characters
Correcting a character just entered
OPERATION
“L” “E” “N” “O” “N”
yyy
INS/
B
OVR
“M”
DISPLAY (character)
1 Enter LENON, instead of LEMON.
LENON
1 Press left arrow key three times.
LENON
1 Override mode
LENON
1 Enter “M”.
LEMON
Blinking
Correcting and adding a PLU descriptor already set
OPERATION
15+
“S”, “O”,“D”, “A”, “ ”
INS/
B
OVR
“L”
1 Enter “00”.
1 Enter PLU No.
MEMON
1 Enter “SODA” and “space”.
SODA MEMON
1 Override mode
SODA MEMON
1 Enter “L”.
SODA LEMON
Program 2
-
DISPLAY (character)
Correcting a key descriptor already set
OPERATION
DISPLAY (character)
-
1 Enter “00”.
!
1 Designate an appropriate key
LENON
1 Press right arrow key two times.
LENON
“M”
1 Enter “M”.
LEMNON
^
1 Delete “N”.
LEMON
uu
Correcting a message descriptor already set
OPERATION
0101s
DISPLAY (character)
1 Enter record and file number.
GRASS
1 Press right arrow key two times.
GRASS
“O”
1 Enter “O”.
GROASS
^
1 Delete “A”.
GROSS
uu
* Blinking digit indicates cursor position.
TK-3200 Dealer's Manual
117
NINS
Character programming (P2)
Issuing program reading report of program 2 mode
Issuing procedure
PGM
6 2s 6 s
Mode switch
Report sample
P02 ....................
GROSS
NET
CAID
CATL
GT1
GT2
GT3
0001-01
0002-01
0003-01
0004-01
0005-01
0001-02
0002-02
0003-02
0004-02
0001-05
0002-05
0003-05
0004-05
0001-06
0002-06
0003-06
0004-06
0001-07
0002-07
0003-07
0004-07
0001-18
0002-18
0003-18
0004-18
0001-20
0002-20
0003-20
• @No/ **
NoCT@ LB *QT
X
BUSY
0001-23
0002-23
0003-23
FIX
TRANS
PLU
0001-24
0002-24
0003-24
0004-24
0001-29
0002-29
0003-29
0004-29
CHECK
CHARGE2
PD
DEPT01
DEPT02
DEPT03
GROUP01
GROUP02
GROUP03
C01
C02
C03
TBL01
TBL02
TBL03
BATCH 01
BATCH 02
BATCH 03
118
NINS
— Program read symbol
— Fixed totalizer character
— Transaction key character
— Department character
— Group character
— Clerk character
— Table character
0001-32
YOUR RECEIPT
0002-32
THANK YOU
0001-33
***ENDORSE MESSAGE******
****************
0002-33
AGE***********
0001-34
***SLIP MESSAGE*********
****************
0002-34
E**************
0001-39
CHARACTER RECALL *******
*****************
0002-39
L ************
ORDER01
0001-65
ORDER02
0002-65
ORDER03
0003-65
0004-65
MC#01
0001-91
0001-96
AT COMMAND**************
************************
*******
— Special character
— Report header character
— Batch X/Z character
0002-96
ATA
PASSWORD
— Receipt message
— Check endorsement message
— Slip/external printer message
— Recall character
— Order character
— Terminal connection table character
— AT command
ATI4
0001-97
— Online password
Unit price/rate (Program 1)
Date/time setting
Date setting
*
PGM
61s 6 : : : : : : 6
Mode switch
Year
Month
X
6
or
C
x
Day
Range: 2000 ~ 2099
*
PGM
6 1s 620 : : : : : : 6
or
6C
x
Mode switch
Year
Range: 2000 ~ 2099
Month
Day
You can use <X>, <X/XX> or <X/KETTEN> instead of these keys.
Program 1
*
X
Time setting
*
PGM
6 1s 6 : : : : 6
Hour
Minute
(00 ~ 23) (00 ~ 59)
Mode switch
X
6
or
C
x
*
PGM
6 1s 6 : : : : : 6
Mode switch
*
Hour
Minute 10 second
(00 ~ 23) (00 ~ 59) (0 ~ 5)
X
6C
or
x
You can use <X>, <X/XX> or <X/KETTEN> instead of these keys.
Unit price program
Programming procedure
Programming the 1st unit price and unit quantity (to department/flat-PLU key)
To another department/flat-PLU key
PGM
MENU
SHIFT
B
6 1s 6
Mode switch
TK-3200 Dealer's Manual
or
turnover
sheet
holder
6:~ : 6
Program data
(12 digits)
Department
6s
Flat-PLU
119
NINS
Unit price/rate programming (P1)
Programming the unit price and unit quantity (to PLU)
To a new (not sequential) PLU
Different program to the next PLU
Same program
PGM
6 1s 6 PLU No.+ 6 : ~ : 6 a 6 s
Mode switch
(Rec No.: 4 digits)
(Random code: 6 digits)
Program data
(12 digits)
Program data
Description
Choice
Program code
D12 ~ D7 for non scalable item (unit quantity/2nd unit quantity)
Unit quantity (integer)
Significant
numbers
Unit quantity (decimal)
Significant
numbers
::::
D12 D11 D10 D9
::
D8 D7
D12 ~ D7 for scalable item (unit quantity/2nd unit quantity)
Unit quantity (integer)
Significant
numbers
Unit quantity (decimal)
Significant
numbers
120
NINS
D12 D11
:::
D10 D9 D8
;
Always “0”
Unit price
::
D7
Significant
numbers
::::::
D6 D5 D4 D3 D2 D1
Rate program
<CURRENCY EXCHANGE>
PGM
6 1s 6 : : : : ^ : : : : 6 E 6 s
Integer
(Max. 4-digits)
Mode switch
Example:
$1.00 = ¥110.50
¥100 = $0.9050
2
2
1^105
0^905
Decimal
(Max. 4-digits)
Preset rate
<CHECK>, <NEW BALANCE>, <PREMIUM (%+)>, <DISCOUNT (%–)>, <RATE TAX>
PGM
6 1s 6 : : ^ : : 6
Appropriate
key
6s
Integer
Decimal
(Max. 2-digits) (Max. 2-digits)
Mode switch
Preset rate
Program 1
Amount program
<CASH>, <CHECK>, <NEW BALANCE>, <PLUS (+)>, <MINUS (–)>, <COUPON>
PGM
61s 6 : : : : : : 6
6s
Appropriate
key
Amount
(Max. 6-digits)
Mode switch
Scanning PLU direct maintenance programming
Programming procedure
PGM
6 1s 6 0071s6
Mode switch
PRICE
6B
6
SHIFT
Code
OBR
B
Scanning
NLU
B
*1
6 : : 6 a~6
Link Dept No.
a
Link Department
6s
Program data
*1
Skip by general function programming address code 32.
Program data
Description
Unit quantity (0.01 ~ 9999.99)
Unit price (000000 ~ 999999)
TK-3200 Dealer's Manual
Choice
Program code
integer part
(0000 ~ 9999)
::::
decimal part
(00 ~ 99)
::
Significant
numbers
::::::
D12 D11 D10 D9
D8 D7
D6 D5 D4 D3 D2 D1
121
NINS
Unit price/rate programming (P1)
Issuing program reading report of program 1 mode
Issuing procedure
PGM
6 1s 6 s
Mode switch
Report sample
P01 ....................
— Program read symbol
CASH
CHECK
%-
@100.00
@1.00
@1.00
10%
— Transaction key unit price or rate
0001-05
@1.00
0002-05
@2.00
— Department descriptor/rec-#/file-#
— Unit quantity/unit price
DEPT01
1.2
DEPT02
1
122
NINS
Program reading (Program 6)
Issuing program reading report
Issuing procedure
Reading by file
6 6s 6 : : : s
PGM
Mode switch
Reading code
Reading by range
PGM
6 6s 6 : : : s 6 : ~ : a 6 : ~ : a
Mode switch
Reading code
End rec-#
Start rec-#
Report code
Fixed totalizer
Transaction key
PLU
Department
Group
Clerk
Hourly sales
Scanning PLU
Table analysis
Grand total
General control
Special character
Report header
Tax table
Set menu table
Batch X/Z
Clerk detail link
Receipt message
Check endorsement message
Slip/local/remote printer message
Arrangement table
Character recall
Non-PLU table
Check print control
Mix & match
Employee
Scheduler
Bottle link table
One touch NLU table
Miscellaneous message
Printing guidance message
Error message
Registration guidance message
X/Z guidance message
Program guidance message
Help message
Terminal connection table
Printer connection table
AT command
Online password
I/O parameter table
TK-3200 Dealer's Manual
Unit price
Report code
Character
----102
104
105
-----------------------------------------------------------------------------------------------------------------------------------------------------
201
202
204
205
206
207
--------218
220
----223
224
--------229
----232
233
234
----239
--------251
----------------278
279
280
281
282
283
285
291
----296
297
-----
Status, etc.
----302
304
305
----307
309
316
318
----322
--------325
328
329
330
---------
Note
By range reading
By range reading
Program 6
File name
By range reading
338
340
341
351
361
362
373
377
----------------------------391
393
--------398
123
NINS
Program reading (P6)
Report sample
Fixed totalizer
P02 ....................
— Program 2 mode symbol
GROSS
NET
CAID
CATL
— Fixed totalizer descriptor/rec-#/file-#
0001-01
0002-01
0003-01
0004-01
Transaction key
Program 1
P01 ....................
— Program 1 mode symbol
CHECK
CASH
%-
— Transaction key descriptor/unit price
@10.00
@1.00
@2.20
10.24%
— Transaction key descriptor/rate
Program 2
P02 ....................
— Program 2 mode symbol
CHECK
CREDIT2
PD
CASH
— Transaction key descriptor/rec-#/file-#
0001-02
0002-02
0003-02
0004-02
Program 3
P03 ....................
— Program 3 mode symbol
CHECK
— Transaction key descriptor/rec-#/file-#
CREDIT2
124
NINS
0001-02
000000000000
0002-02
000002000002
PLU
Program 1
P01 ....................
— Program 1 mode symbol
#000001 - #000010
PLU0001
0001-04
#000001
1.23
@10.00
PLU0002
0002-04
#000002
2.34
@30.00
—
—
—
—
P02 ....................
— Program 2 mode symbol
#000001 - #000010
PLU0001
0001-04
#000001
PLU0002
0002-04
#000002
PLU0003
0003-04
— PLU range
— PLU descriptor/rec-#/file-#
— PLU random code
PLU range
PLU descriptor/rec-#/file-#
PLU random code
Unit quantity/unit price
Program 6
Program 2
Program 3
P03 .................... —
Program 3 mode symbol
— PLU range
#000001 - #000010
PLU0001
0001-04 — PLU descriptor/rec-#/file-#
00000000000000 — Address code 01 ~ 10, 18 program
11-66
000000 — Address code 11 program
12-66
#000000 — Address code 12 program
13-66
<- 0001-28 — Address code 13 program
14-66
12.345 — Address code 14 program
15-66
@1234.56 — Address code 15 program
16-66
000000 — Address code 16 program
17-66
00 — Address code 17 program
PLU0002
0002-04
TK-3200 Dealer's Manual
125
NINS
Program reading (P6)
Department
Program 1
P01 ....................
— Program 1 mode symbol
#0001 - #0010
DEPT01
0001-05
1.23
@10.00
DEPT02
0002-05
2.34
@30.00
— Department range
— Department descriptor/rec-#/file-#
— Unit quantity/unit price
P02 ....................
— Program 2 mode symbol
Program 2
DEPT01
DEPT02
DEPT03
#0001 - #0010
0001-05
0002-05
0003-05
— Department range
— Department descriptor/rec-#/file-#
Program 3
P03....................
— Program 3 mode symbol
#0001 - #0010
0001-05
00000000000000
11-66
000000
15-66
@1234.56
16-66
000000
17-66
00
DEPT02
0002-05
—
—
—
—
—
—
—
P02....................
— Program 2 mode symbol
GROUP01
GROUP02
GROUP03
— Group descriptor/rec-#/file-#
DEPT01
Department range
Department descriptor/rec-#/file-#
Address code 01 ~ 10, 18 program
Address code 11 program
Address code 15 program
Address code 16 program
Address code 17 program
Group
126
NINS
0001-06
0002-06
0003-06
Clerk
Program 2
P02....................
C01
C02
C03
#0001 - #0010
0001-07
0002-07
0003-07
— Program 2 mode symbol
— Clerk range
— Clerk descriptor/rec-#/file-#
Program 3
P03....................
C01
—
—
—
—
—
—
—
Clerk range
Clerk descriptor/rec-#/file-#
Check-#/drawer-#/secret-#
Address code 67 program
Address code 68 program
Address code 69 program
Address code 70 program
Program 6
67
68
69
70
C02
#0001 - #0010
0001-07
000001000001
0000000000
00000000
000000000000
0000000000
0002-07
— Program 3 mode symbol
Hourly sales
P03 ....................
— Program 3 mode symbol
0001-09
0002-09
0003-09
— Rec-#/file-#/time zone
00:00 -> 01:00
01:00 -> 02:00
02:00 -> 03:00
Scanning PLU
P03 ....................
— Program 3 mode symbol
SCAN-PLU0001
#49401004
—
—
—
—
0
@10.00
0 000000 000100 0000 00
TK-3200 Dealer's Manual
Scanning PLU descriptor
Scanning PLU code
Unit quantity/unit price
Menu sheet No./status/link dept/
bottle link/mix & match
127
NINS
Program reading (P6)
Table analysis
Program 2
P02 ....................
— Program 2 mode symbol
TBL01
TBL02
TBL03
— Table descriptor/rec-#/file-#
0001-18
0002-18
0003-18
Program 3
P03 ....................
— Program 3 mode symbol
TBL01
— Table descriptor/rec-#/file-#
— Program data
TBL02
TBL03
0001-18
000000000000
0002-18
000000000000
0003-18
Grand total
P02 ....................
— Program 2 mode symbol
GT1
GT2
GT3
— Grand total descriptor/rec-#/file-#
0001-20
0002-20
0003-20
General control
P03 ....................
— Program 3 mode symbol
0001-22
0002-22
0003-22
— Rec-#/file-#/program data
2200000000
0000000000
0000000000
Special character
128
NINS
P02 ....................
— Program 2 mode symbol
• @No/ ** ⁄
NoCT @LB *QT
X
BUSY
— Special character/rec-#/file-#
0001-23
0002-23
0003-23
Report header
P02 ....................
— Program 2 mode symbol
FIX
TRANS
PLU
— Report header character/rec-#/file-#
0001-24
0002-24
0003-24
Tax table
P03 ....................
— Program 3 mode symbol
0001-25
TX1
TX1
TX1
— Rec-#/file-#
— Tax table program data
12.3456%
0000
5003
P03 ....................
— Program 3 mode symbol
0001-28
PLU0001
PLU0002
— Rec-#/file-#
— Linked PLU descriptor/rec-#/file-#
0001-04
0002-04
Program 6
Set menu table
Batch X/Z
Program 2
P02 ....................
— Program 2 mode symbol
BATCH 01
BATCH 02
BATCH 03
— Batch report descriptor/rec-#/file-#
TK-3200 Dealer's Manual
0001-29
0002-29
0003-29
129
NINS
Program reading (P6)
Program 3
P03 ....................
— Program 3 mode symbol
BATCH 01
00
— Batch report descriptor/rec-#/file-#
— Execution mode/report code
— Report code
BATCH 02
0001-29
11-12-17-15-00
00-00-00-00-00
0002-29
Clerk detail link
P03 ....................
— Program 3 mode symbol
0001-30
GROSS
0002-30
NET
— Rec-#/file-#
— Linked total descriptor/rec-#/file-#
0001-01
0002-01
Receipt message
P02 ....................
— Program 2 mode symbol
0001-32
************************
0002-32
**
LOGO MESSAGE
**
— Rec-#/file-#
— Message
Check endorsement
130
NINS
P02 ....................
— Program 2 mode symbol
0001-33
************************
****************
0002-33
— Rec-#/file-#
— Message
Slip/external printer message
P02 ....................
— Program 2 mode symbol
0001-34
************************
****************
0002-34
— Rec-#/file-#
— Message
Arrangement table
P03 ....................
— Program 3 mode symbol
0001-38
REG1
1
2
DEPT01
— Rec-#/file-#/arrangement table -#
— Function descriptor/key-#/function-#
000001
204-000
001-000
002-000
026-051
P02 ....................
— Program 2 mode symbol
0001-39
************************
****************
0002-39
— Rec-#/file-#
— Message
P03 ....................
— Program 3 mode symbol
0001-40 0000000000000000
0002-40 0000000000000000
0003-40 0000000000000000
— Rec-#/file-#/program
Program 6
Character recall
Non-PLU table
Check print control
P03 ....................
— Program 3 mode symbol
0001-41
0002-41
0003-41
— Rec-#/file-#/program
TK-3200 Dealer's Manual
000000
000000
000000
131
NINS
Program reading (P6)
Mix & match
Program 2
P02 ....................
— Program 2 mode symbol
DISCOUNT01
DISCOUNT02
DISCOUNT03
— Descriptor/rec-#/file-#
0001-51
0002-51
0003-51
Program 3
P03 ....................
— Program 3 mode symbol
DISCOUNT01
@1.45
DISCOUNT02
— Descriptor/rec-#/file-#
— Discount amount/status
0001-51
000003
0002-51
Employee
P03 ....................
— Program 3 mode symbol
CSHR01
— Employee name/rec-#/file-#
— Programming data
CSHR02
0001-061
0000000000
0002-061
0000000000
Scheduler
P03 ....................
— Program 3 mode symbol
0001-62
— Rec-#/file-#/data 1
— Data 2
— Data 3
0002-62
001234
000000000000000
00000000000
002345
Bottle link table
132
NINS
P03 ....................
— Program 3 mode symbol
0001-73
PLU0001
0002-73
— Rec-#/file-#
— Linked PLU descriptor/rec-#/file-#
0001-04
One touch NLU
P03 ....................
— Program 3 mode symbol
0001-77
Scanning PLU001
#1234567890123
— Rec-#/file-#
— Linked scanning PLU descriptor
— Scanning PLU code
P02....................
— Program 2 mode symbol
0001-85
ENTER NUMBER THEN
0002-85
PRESS <HELP> KEY.
— Rec-#/file-#
— Program
Help message
Program 6
Terminal connection table
Program 2
P02 ....................
— Program 2 mode symbol
MC#01
0001-91
— ID character/rec-#/file-#
P03 ....................
— Program 3 mode symbol
MC#01
0001-91
1001
— ID character/rec-#/file-#
— Program
P03 ....................
— Program 3 mode symbol
0001-93
0002-93
0003-93
— Rec-#/file-#/program
Program 3
Printer connection table
TK-3200 Dealer's Manual
000000
100000
000000
133
NINS
Program reading (P6)
AT command
P02 ....................
— Program 2 mode symbol
0001-96
AT command *************
************************
**************
— Rec-#/file-#
— Program
0002-96
Online password
P02 ....................
— Program 2 mode symbol
PASSWORD
— Program/rec-#/file-#
0001-97
I/O parameter table
P03 ....................
— Program 3 mode symbol
0001-98
0002-98
— Rec-#/file-#/program
00000000000000
00000000000000
Miscellaneous message
P02 ....................
— Program 2 mode symbol
GT TIME
START DATE
RAM
— Message/rec-#/file-#
0001-78
0002-78
0003-78
Printing guidance message
P02 ....................
— Program 2 mode symbol
0001-79
0005-79
DIRECT MAINTE NORMAL END
0006-79
134
NINS
— Rec-#/file-#
— Message
Error message
P02 ....................
— Program 2 mode symbol
#0001
E001
Wrong mode
#0003
E003
— Guidance-No. (internal use)
— Error code/rec-#/file-# (do NOT change)
— Error message/rec-#/file-#
0001-80
0002-80
0003-80
P02 ....................
— Program 2 mode symbol
#0001
NOT FOUND PLU
INPUT UNIT PRICE
,AND PRESS DEPT
KEY
#0002
— Guidance No. (internal use)
— Message/rec-#/file-#
0001-81
0002-81
0003-81
0004-81
Program 6
Registration guidance message
X/Z guidance message
P02 ....................
— Program 2 mode symbol
#0001
PLU BY RANGE
INPUT START NO.
AND PRESS <#1>
#0002
PLU BY RANGE
INPUT END NO. AN
— Guidance No. (internal use)
— Message/rec-#/file-#
0001-82
0002-82
0003-82
0001-82
0004-82
Program guidance message
P02 ....................
— Program 2 mode symbol
#0001
RANGE PGM
INPUT START NO.
AND PRESS <#1>
#0002
RANGE PGM
INPUT END NO. AN
— Guidance No. (internal use)
— Message/rec-#/file-#
TK-3200 Dealer's Manual
0001-83
0002-83
0003-83
0001-83
0004-83
135
NINS
Program reading (P6)
136
NINS
Auto-program & system utilities (Program 7)
Auto-programming
Using the auto-program function makes it possible to save and load the terminal program files. Methods available for
saving the terminal program are as follows:
1) Saving onto a personal computer connected through online.
2) Saving onto a CF card.
To ensure quick recovery from a corrupted file resulting from user error or system failure, it is recommended that you
maintain backup copies of current terminal programs on a file basis.
Terminal program files can be loaded using procedures opposite to those used for saving.
Note
Data except for program data and totalizer/counters, such as subtotal amount, item counter, and work area, cannot be saved
by the auto-programming function.
Never plug/unplug the CF card during auto-programming.
Auto-programming functions
1) Copy complete terminal files (send/receive: activation by source terminal) :Command code 900
This function copies complete terminal files (except system work files) with counter and totalizers. When a file is not
reserved on the target terminal, the file is created automatically. This function is used for backing up a terminal.
2) Copy all terminal files (send/receive: activation by source terminal): Command code 090 (or 990)
This function copies all terminal files (except system work files and terminal ID No.) with counter and totalizers. When a
file is not reserved on the target terminal, the file is created automatically. This function is used for copying a terminal data
to other terminal.
3) Copy all terminal program files (send/receive: activation by source terminal): Command code 092
This function copies all terminal files (except system work files, terminal ID No., I/O parameter table file, and consecutive
No.) without counters and totalizers. When a file is not reserved on the target terminal, the processing file is skipped.
4) Copy all terminal program files with file allocation (send/receive: activation by source terminal): Command code 992
This function copies all terminal files (except system work files, terminal ID No., I/O parameter table file, and consecutive
No.) without counters and totalizers. When a file is not reserved on the target terminal, the file is created automatically.
5) Copy individual terminal program files (send/receive: activation by source terminal) Command code 0xx (xx: file No.)
This function copies the specific terminal program file (except system work files) without counters and totalizers. When the
specific file is not reserved on the target terminal, it is skipped.
6) Copy individual terminal program files with file creation (send/receive: activation by source terminal)
Command code 9xx (xx: file No.)
This function copies the specific terminal program file (except system work files) without counters and totalizers. When the
specific file is not reserved on the target terminal, it is allocated automatically.
TK-3200 Dealer's Manual
137
NINS
Program 7
The terminal is capable of saving and loading terminal program files. The terminal has the following transfer functions:
Auto-programming/system utilities (P7)
Command code list
File
No.
File description
System files
089
Consecutive number work
091
Terminal connection table
093
Printer connection
094
Start date
095
Initialize code
096
AT command
097
Online password
098
I/O parameter table
099
System error log
Function and total files
001
Fixed totalizer
101
(periodic total 1)
201
(periodic total 2)
301
(daily consolidation)
401
(periodic 1 consolidation)
501
(periodic 2 consolidation)
002
Transaction key
102
(periodic total 1)
202
(periodic total 2)
302
(daily consolidation)
402
(periodic 1 consolidation)
502
(periodic 2 consolidation)
004
PLU
104
(periodic total 1)
204
(periodic total 2)
304
(daily consolidation)
404
(periodic 1 consolidation)
504
(periodic 2 consolidation)
005
Department
105
(periodic total 1)
205
(periodic total 2)
305
(daily consolidation)
405
(periodic 1 consolidation)
505
(periodic 2 consolidation)
006 Group
106
(periodic total 1)
206
(periodic total 2)
306
(daily consolidation)
406
(periodic 1 consolidation)
506
(periodic 2 consolidation)
009 Hourly sales
109
(periodic total 1)
209
(periodic total 2)
309
(daily consolidation)
409
(periodic 1 consolidation)
509
(periodic 2 consolidation)
010 Monthly sales
110
(periodic total 1)
210
(periodic total 2)
310
(daily consolidation)
410
(periodic 1 consolidation)
510
(periodic 2 consolidation)
018 Table analysis
118
(periodic total 1)
218
(periodic total 2)
318
(daily consolidation)
138
NINS
Command
900
Command
090/990
Command
092/992
Command
0xx/9xx
✔
✔
✔
✔
✔
✔
✔
✔
✔
--✔
✔
--✔
✔
✔
-----
--✔
✔
----✔
✔
-----
--091/991
093/993
----096/996
097/997
098/998
---
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
----------✔
----------✔
----------✔
----------✔
----------✔
----------------------✔
-------
001/901
----------002/902
----------004/904
----------005/905
----------006/906
----------009/909
----------------------018/918
-------
File description
418
(periodic 1 consolidation)
518
(periodic 2 consolidation)
020 Grand total
320
(daily consolidation)
Check files
015 Check Index
056 Separate check buffer
060 Check detail
Clerk files
007 Clerk
030 Clerk detail link
011 Clerk detail
111
(periodic total 1)
211
(periodic total 2)
311
(daily consolidation)
411
(periodic 1 consolidation)
511
(periodic 2 consolidation)
Time & attendance files
019 Time & attendance
Scanning PLU files
016 Scanning PLU
040 Non PLU table
051 Mix & match table
151
(periodic total 1)
251
(periodic total 2)
351
(daily consolidation)
451
(periodic 1 consolidation)
551
(periodic 2 consolidation)
070 Batch maintenance PLU
071 Direct maintenance PLU
076 Scanning PLU index
077 One touch NLU table
Arrangement file
038 Arrangement table
Program / message / buffer files
022 General control
023 Special character
024 Report header
025 Tax table
028 Set menu table
029 Batch X/Z
032 Receipt/slip message
033 Endorse message
034 Slip/external printer message
035 Remote printer print buffer
036 Registration buffer
039 Character recall
041 Check print
046 Character key table
049 Local printer print buffer
062 Scheduler
065 Order character
073 Bottle link table
074 Key table
078 Miscellaneous message
TK-3200 Dealer's Manual
Command
900
Command
090/990
Command
092/992
Command
0xx/9xx
✔
✔
✔
✔
✔
✔
✔
✔
----✔
---
----020/920
---
✔
✔
✔
✔
✔
✔
-------
-------
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
-------------
007/907
030/930
-------------
✔
✔
---
---
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
----------✔
--✔
✔
016/916
040/940
051/951
----------070/970
--016/916
077/977
✔
✔
✔
038/938
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
----✔
✔
✔
--✔
✔
✔
✔
✔
022/922
023/923
024/924
025/925
028/928
029/929
032/932
033/933
034/934
----039/939
041/941
046/946
--062/962
065/965
073/973
074/974
078/978
Program 7
File
No.
139
NINS
Auto-programming/system utilities (P7)
File
No.
File description
079
080
081
082
083
085
086
Printing guidance message
Error message
Registration guidance message
X/Z guidance message
Program guidance message
Help message
Slip print buffer
Command
900
Command
090/990
Command
092/992
Command
0xx/9xx
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
---
079/979
080/980
081/981
082/982
083/983
085/985
---
Auto-programming operation
To CF card
Default file name
PGM
67s 6 70s 6 : : : a 6 : ~ : -6 a
Command code
Mode switch
6
* File name
(file name:8 + suffix: 3)
(Execution)
8
6s
(Cancellation)
* File name: You can use only the capital alphabet (A ~ Z), numerics (0. 1 ~ 9) and minus sign.
Note: You cannot overwrite the same file name.
If there is no enough room for auto-program delete other files in the CF card or format it.
If you use the CF card for the first time, format it.
From CF card
PGM
6 7s 6 20s 6
File selection by
the cursor keys
6 a (Execution)
Mode switch
6
Cursor keys
030
021
051
140
NINS
Up cursor key
Down cursor key
029
020
028
019
049
027
018
048
050
8
6 s
(Cancellation)
Other utilities
Issuing system error log report
6 7s 6 1033s
PGM
Mode switch
Report sample
---------(1033)--------GT TIME
003783
START DATE
04-03-2006
-----------------------01 0001 0001 000505
1058 0102
02 0000 0000 000000
0000 0000
03 0000 0000 000000
0000 0000
— Total working time
— Start date
— Rec-#/job No./error code (Refer to the appendix.)/date
— Time/destination terminal ID
Issuing CF card directory report
Program 7
6 7s 6 1170s
PGM
Mode switch
Report sample
---------(1170)--------001 PGM 1000.090
10,953
04-30-2004 12:34
002 FILE0001.090
1,024
04-30-2004 12:34
------------------------
—
—
—
—
—
—
Title
Auto-programming title
Index capacity
Date/time
Auto-programming file name
File capacity
Cf. The meaning of file name: FILEnnnn.mmm
nnnn: file number, mmm: auto-programming command code
Formatting of CF card
PGM
6 7s 6 0270s 6 a
(Execution)
Mode switch
6s
TK-3200 Dealer's Manual
(Cancellation)
141
NINS
Auto-programming/system utilities (P7)
Deleting a file from CF card
6 7s 6 30s 6
PGM
File selection by
the cursor keys
6 a (Execution)
Mode switch
Cursor keys
030
8
6 s
6
021
051
(Cancellation)
Up cursor key
Down cursor key
029
020
028
019
049
027
018
048
050
Set the AT command to default value
PGM
6 7s 6 2310s
Mode switch
Set the AT command to MODEM
Before executing this command, you should connect a MODEM.
PGM
6 7s 6 4310s 6 a
(Execution)
Mode switch
6s
Report sample
(Cancellation)
---------(4310)--------Modem set
-----------------------AT&V
ACTIVE PROFILE:
— Modem response
Normal End
Set the graphic logo to the external printer
Before executing this command, you should connect UP-360.
PGM
6 7s 6 4350s 6 a
(Execution)
Mode switch
6s (Cancellation)
142
NINS
Manager operation
This section describes modes and operations that are generally used by management only. Besides user programming
procedure, it also describes how to perform clerk assignments for clerk interrupt function and set stock quantities.
Manager control mode (X1 mode)
•
•
•
•
•
•
•
Manager control consists of the six operations listed below. Access to these operations can be restricted by password that
makes it impossible to perform operations unless the correct password is input.
Drawer assignments for each clerk (when optional multi-drawer system is used)
Stock quantity maintenance
Clerk assignment for clerk interrupt function
Clerk number to clerk number key
Programming for the Euro
Programming for Australian GST
Program 1 programming (programming unit prices for department keys, PLUs; programming unit prices, rates, times, dates
for function keys)
Entering the manager control mode
Procedure
6 o6 : : : : 6 k 6
Mode switch
Password (4-digit)
MGR
1. If the register has no password for the manager mode, you need not to enter it.
2. Press the clerk number key if you want the password you input not to appear on the display.
3. An error occurs if you try to enter the manager control mode without inputting a password (when one is programmed), or if
the password you input does not match the one programmed for the register.
To avoid repetition, the above operation is abbreviated to the following for all of the other procedure in this section.
Assign drawers for each clerk
Procedure (by clerk button)
MGR
6
Sign on by clerk button
6 : 6r
Drawer assignment
Drawer 1 = 0, 1
Drawer 2 = 2
Procedure (by clerk code)
MGR
6 : 6 :::: 6 r
Drawer assignment
Drawer 1 = 0, 1
Drawer 2 = 2
Clerk No.
Note:
1. Each clerk can be assigned a drawer when optional multi-drawer system is being used.
2. Input a 4-digit clerk number (0001 ~ 9999) that identifies the clerk you want to assign the drawer to.
TK-3200 Dealer's Manual
143
NINS
Manager operation
X1
Manager operation
Stock quantity maintenance (PLU/flat PLU/scanning PLU)
You can make changes in actual stock quantities for PLU using the procedures described in this section.
To add to the actual stock quantity of a PLU/flat PLU/scanning PLU
To a new PLU
To the next PLU
Same value to
the next PLU
Procedure for PLU
MGR
6 2s 6 : ~ : + 6 : ~ : 6 a 6 s
PLU No./random code
Added value
To a new flat PLU
Procedure for flat PLU
Same value to
the next PLU
MGR
MENU
Flat6 2s 6 B
6s
SHIFT 6 : ~ : 6 B
PLU
Added value
Procedure for scanning PLU
To a new scanning PLU
:~ : 6
MGR
6 2s 6
Scanning
OTN
B
6s
Added value
: ~ : 6® 6 :~ :
Scanning PLU code
a
Added value
To subtract from the actual stock quantity of a PLU/flat PLU/scanning PLU
To a new PLU
Procedure for PLU
To the next PLU
Same value to
the next PLU
MGR
6 2s 6 : ~ : + 6R 6 : ~ : 6 a 6 s
PLU No./random code
Procedure for flat PLU
Subtracted value
To a new flat PLU
Same value to
the next PLU
MGR
MENU
Flat~: 6B
6 2s 6 B
SHIFT 6 R 6 :
PLU 6 s
Procedure for scanning PLU
MGR
Subtracted value
To a new scanning PLU
:~: 6
6 2s 6 R 6 Subtracted value
6s
:~: ® 6 : ~ : a
Scanning PLU code
144
NINS
Scanning
OTN
B
Subtracted value
To input the new stock quantity of a PLU/flat PLU
To a new PLU
Procedure for PLU
MGR
To the next PLU
Same value to
the next PLU
6 8s 6 : ~ : + 6 : ~ : 6 a 6 s
Adjusted value
PLU No./random code
To a new flat PLU
Procedure for flat PLU
Same value to
the next PLU
MGR
FlatMENU
~ : 6 B
6 8s 6 B
PLU 6 s
SHIFT 6 :
Adjusted value
Procedure for scanning PLU
MGR
To a new scanning PLU
6 8s 6
:~: 6
Adjusted value
Scanning
OTN
B
6s
: ~ : 6 ®6 : ~ : a
Scanning PLU code
Adjusted value
Clerk assignment
Linking a clerk to a clerk interrupt buffer enables clerk interrupt while a transaction is in progress.
To link clerk button/key to interrupt buffers
MGR
6 Sign on by clerk button/key 6 : ~ : 6
To link clerk secret numbers to interrupt buffers
Manager operation
Procedure
{ }
X
x
Check No. for clerk interrupt
(Max. 6 digits)
Procedure
To other clerk
MGR
6 :~ : 6: : : : 6
Check No. for
clerk interrupt
(Max. 6 digits)
{ }
X
x
6s
Clerk No. (4 digits)
To link clerk numbers to clerk number keys
Procedure
To other clerk
MGR
6 00 6 : : : : 6 o 6 s
Clerk No. (4 digits)
Note:
To clear the programming, enter “000000.”
TK-3200 Dealer's Manual
145
NINS
Manager operation
Programming for the Euro
This procedure is used for defining main/sub currency, currency exchange rate for the Euro, and drawer number for sub
currency at the same time. Please follow the guidance receipts issued in each time during this procedure.
General procedure
Guidance
message
MGR
6 01072002s
Guidance
message
6 a 6
Guidance
message
6
:a 66
Currency definition type
(1 ~ 4)
Abortion: s
(enter “1”)
6
(enter “2”)
6
(enter “3”)
6
(enter “4”)
refer to type 1 procedure
refer to type 2 procedure
refer to type 3 procedure
refer to type 4 procedure
Note: After this operation, the Init 2 (Memory all clear except the program area) is automatically performed.
Data (Currency definition type)
Description
Currency definition type * :
Main = local, sub = Euro, change = local .............. 1
Main = local, sub = Euro, change = Euro .............. 2
Main = Euro, sub = local, change = Euro .............. 3
Euro only (No sub currency) .................................. 4
Choice
Program code
:
Significant
number
D1
* Once you have chosen one of these numbers, do NOT select the smaller number of the type.
Type 1 procedure
Guidance
message
Result
printing
6 : : : : : : 6a 6 : 6 6a
Currency conversion rate
(Execution)
Drawer No.
6 s (Cancellation)
Abortion: s
Type 2 procedure
Result
printing
Guidance
message
6 : : : : : : 6a6 : 66 a (Execution)
Currency conversion rate
Drawer No.
* This step is skipped, if the rate had been already set.
Abortion: s
146
NINS
6s
(Cancellation)
Type 3 procedure
Result
printing
Guidance
message
Guidance
message
6 : : : : : : 6 a 6 : 6a 66 : 6 a (Execution)
Currency conversion rate
Drawer No.
Unit price
conversion
* This step is skipped, if the rate had been already set.
6 s (Cancellation)
Abortion: s
Type 4 procedure
Guidance
message
6 : : : : : : 6 a 66
Currency conversion rate
* This step is skipped, if the rate had been already set.
Result
printing
: 66a
(Execution)
Unit price
conversion
* The unit price conversion is skipped,
if the Euro had been used as main currency.
6s
Abortion: s
(Cancellation)
Data (Currency conversion rate)
Choice
Significant
numbers
Program code
::::::
Manager operation
Description
Currency exchange rate: (6 digit with decimal point key)
example: 1 Euro = DM 1.95583
D6 D5 D4 D3 D2 D1
Data (Drawer number for sub currency)
Description
Cash drawer number of sub currency: 0 - 2
(“0” means main drawer)
Choice
Significant
number
Program code
:
D1
Date (Unit price conversion to Euro)
Description
All unit price (department, PLU, flat-PLU, scanning PLU) are
converted in Euro.
Note: All unit price/rate of the following function keys (<CASH>,
<CHECK>, <NB>, <+>, <–>, <COUPON>) are set to zero.
Choice
Program code
Yes = 0
No = 1
:
D1
Automatic execution of this procedure on the preset date/time
You can execute this Euro switchover procedure automatically by using arrangement and scheduler.
Please refer to the programming example on page 178.
TK-3200 Dealer's Manual
147
NINS
Manager operation
Programming for the Australian GST
This procedure is used for defining
• Tax symbol (*) is printed.
• Taxable amount (receipt) is skipped.
• “GST INCLUDED” is set to the TX1 descriptor.
• “TAXABLE AMT” is set to the TA1 descriptor.
• Total line is printed even in direct (cash) sales.
• Australian rounding is set.
• “$” is set to the monetary symbol.
• Print “MOF message” on receipt.
• Tax (10% tax rate, add-in tax, fraction rounding off) is set to the tax table 1. No data is set to other tax tables.
• The taxable amount and tax amount except TA1/TX1 are not printed on fixed totalizer report.
• “RND/ST” is set to the subtotal descriptor for display.
• After subtotal, both “rounded ST” and “not rounded ST” are displayed.
at the same time.
Procedure
MGR
6 01012001s 6 6 a
6s
(Execution)
(Cancellation)
Programming of items in the program 1 mode
•
•
•
•
•
•
•
•
•
•
•
Use the manager control mode to program the items in the program 1 mode. These items can be preset to prohibit programming by manager control mode. The following is a list of items that you can program using the manager control mode.
Unit prices for departments, and PLUs
Unit prices for the plus, minus, coupon keys
Second unit price for PLU
Percentage for discount/premium key
Rate or amount service charge for check cashing using the check tender key
Rate or amount service charge for temporary finalization using the new balance key
Date
Time
Currency exchange rate for currency exchange key
Rate tax
Scanning PLU direct maintenance
To enter the program 1 mode
X1
6 1s 6
PGM1
Mode switch
1. The register enters the program 1 mode at this point. You do not need to change the mode switch to the program position.
2. Perform program 1 programming as explained in the programming manual.
To exit the program 1 mode
Change the position of the mode control key to another setting (REG1/2, RF, OFF, Z1, X2/Z2 or PGM).
This procedure cancels program 1 mode of manager control (X1) mode.
148
NINS
Read/reset report issuance
Preparation for issuing report
Money declaration
There are two ways to declare the money in drawer amount; money declaration in the REG1/REG2/RF mode or money
declaration in the X1/Z1 mode. Both declarations release “money declaration compulsory.”
Money declaration in the REG1/REG2/RF modes
The register stores the declaration amount, declaration over and declaration short totalizers for each payment medium, and
you can issue reports in the status of each totalizer.
REG1/2
RF
DECLA 66 P 6 : ~ : 6
6B
Sub currency
Amount
(Max. 10-digits)
Mode switch
a
h
DECLA
k 6B
c
{}
:
CR4
B
• Declaration amount: Stores declared amount (added in the REG1/2, subtracted in RF).
• Declaration over: Stores difference between declared amount and in drawer amount if declared amount is greater than the
in drawer amount.
• Declaration short: Stores difference between declared amount and in drawer amount if declared amount is less than the in
drawer amount.
Money declaration in the X1/Z1 modes
Mode switch
6P 6 : ~ : 6
Sub currency
Amount
(Max. 10-digits)
{
Read/reset report
X1/Z1
b
N
n
Password (X2/Z2 mode)
Without entering password of X2/Z2 mode, an error will occur if it is programmed.
X2/Z2
6o6 :::: 6k
Mode switch
Password (4-digits)
Press the clerk number key if you want the password you input not to appear on the display.
Issuing read/reset report
• The formats of read reports are similar to those of reset reports, except that the reset reports contain the symbol “Z” and the
non-resettable number of resets at the top. Also, the non-resettable grand total is printed on the fixed totalizer reset report.
• If money declaration is programmed as compulsory, you must input an amount before you can perform read or reset
operations, otherwise an error will occur.
• “*” is printed on the left side of the “X or Z” symbol on the read or reset report if an overflow occurs in any of the counters
or totalizers.
• A report header message (report title) that indicates the report code and report contents is printed in the header line of each
report. The report header message is programmable up to maximum of 12 characters. Note that the report header is programmable for each totalizer file or for batch X/Z report file record, not for each report code.
TK-3200 Dealer's Manual
149
NINS
Read/reset report
Programmability
•
•
•
•
•
•
•
•
•
•
•
Report issuance can be programmed with the following features:
Suppress printing of zero total lines.
Money declaration compulsory
Report header message (report title)
Print sales ratio
Suppress printing of grand total
Print two copies of the fixed total reset report.
Print PLU number/random PLU codes on the PLU report and individual report.
Clear (reset) actual stock quantity when the stock reset report programmed in a batch report is issued.
Printing control for totalizers and counters in the fixed total report
Start time period for the hourly sales and hourly item report
Print the monthly sales average amount on the monthly sales report.
Issuing procedure
The following procedures are available for issuing reports:
• Individual read/reset report issuance.
• PLU/scanning PLU range read/reset report issuance
• Report code input for individual files for read/reset report issuance
• Batch read/reset report issuance for string report
• File reset (clear totalizers/counters) with no report
Individual report
• Finance report
X1
Mode switch
6
{
X
x
• Individual item/key report
66
X1
MENU
B
6
TransDept
B
action / B
66s
Mode switch
6
Z1
6 091a
Mode switch
Note: Press s to terminate
this procedure.
: ~ :
6
+
6
PLU No./random code
6
MENU
B
6
FlatB
PLU
6
6
PRICE
B
SHIFT
6
NLU
B
6
OBR
B
6
6
: ~ :
6
OBR code
6
Scanning
• Individual clerk/PLU by group, dept./PLU stock by group, dept. report
X1/Z1
X2/Z2
Mode switch
150
NINS
6 : ~ :a 6: ~ :a6 s
Report code
Target No.
Note: Press s to terminate this procedure.
6
Clerk individual
PLU individual by group
Report code (Read: #=0 / Reset: # = 1)
Consolidation file
Daily
Periodic 1 Periodic 2
Daily
Periodic 1 Periodic 2
20017
2#117
2#217
20317
2#417
2#517
1020014 102#114 102#214 1020314 102#414 102#514
Clerk-No.
Group-No.
PLU individual by department
PLU stock individual by group
2020014
1020064
202#114
-----
202#214
-----
2020314
-----
202#414
-----
202#514
-----
Department-No.
Group-No.
PLU stock individual by department
2020064
-----
-----
-----
-----
-----
Department-No.
Report name
Target-No.
• Individual open check report
6025a 66
X1
66 s
a
6 :~: 6 a 6
Mode switch
(All)
(By clerk)
Clerk rec-#
NEW
B
CHK
OLD
6 :~ : 6 B
6
CHK
NEW/
Check No.
B
OLD
{ }
(By check No.)
Read/reset report
Note: Press s to terminate this procedure.
Range report
• PLU range report
• Scanning PLU range report
X1/Z1
X2/Z2
6 : ~ : a 6 : ~ : 6 a6 : ~ : 6 a
Mode switch
Note: Press s to terminate this procedure.
Report code
*1
*2
Start No. *1
End No. *2
If you skip to enter the start No., it starts the first record No./random code.
If you skip to enter the end No., it starts the last record No./random code.
TK-3200 Dealer's Manual
151
NINS
Read/reset report
Report code
Report name
(Read: #=0 / Reset: # = 1)
Target-No.
PLU range by record number
Consolidation file
Daily Periodic 1 Periodic 2 Daily Periodic 1 Periodic 2 Start number
10014 1#114 1#214 10314 1#414 1#514 Start rec-No.
PLU range by random code
PLU stock range by record number
10014
10064
1#114
-----
1#214
-----
10314
10364
1#414
-----
PLU stock range by random code
Scanning PLU by range group
10064
1000026
---------
---------
10364
-----
---------
---------
Start random code
Start group-No.
Scanning PLU by range department
Scanning PLU best 50 by range department
2000026
80026
---------
---------
---------
---------
---------
Start department-No. End department-No.
Start department-No. End department-No.
Scanning PLU inactive item by range department 90026
Scanning PLU stock by range group
1000065
---------
---------
---------
---------
---------
Start department-No. End department-No
Start group-No.
End group-No.
Scanning PLU stock by range department 2000065
-----
-----
-----
-----
-----
Start department-No. End department-No.
1#514 Start random code
----- Start rec-No.
Individual file report
X1/Z1
X2/Z2
6 :~ : a
Report code
Mode switch
Report name
Fixed totalizer
Transaction key
PLU by record number/random code (all)
best 50 (amount order)
best 50 (quantity order)
by group
menu (1st)
menu (2nd)
menu (3rd)
menu (4th)
menu (5th)
menu (6th)
PLU stock all PLU by record number
by group
Department
best 50 (amount order)
best 50 (quantity order)
Group
Clerk
Hourly sales
Monthly sales
Open check
total only
Scanning PLU by range department (all)
Scanning PLU stock by range department (all)
Table analysis
Mix & match
Time & attendance
152
NINS
Daily
11
12
14
60014
70014
24
81
82
83
84
85
86
64
34
15
60015
70015
16
17
19
20
25
40025
26
65
28
61
29
Report code (Read: #=0 / Reset: # = 1)
Consolidation file
Periodic 1 Periodic 2
Daily
Periodic 1 Periodic 2
#111
#211
311
#411
#511
#112
#212
312
#412
#512
#114
#214
314
#414
#514
60114
60214
60314
60414
60514
70114
70214
70314
70414
70514
#124
#224
324
#424
#524
#181
#281
381
#481
#581
#182
#282
382
#482
#582
#183
#283
383
#483
#583
#184
#284
384
#484
#584
#185
#285
385
#485
#585
#186
#286
386
#486
#586
----------------------------------------#115
#215
315
#415
#515
60115
60215
60315
60415
60515
70115
70215
70315
70415
70515
#116
#216
316
#416
#516
#117
#217
317
#417
#517
#119
#219
319
#419
#519
#120
#220
320
#420
#520
--------------------------------------------------------------------------------#128
#228
328
#428
#528
#161
#261
361
#461
#561
---------------------
End number
End rec-No.
End random code
End rec-No.
End random code
End group-No.
Batch report
6 :::: 6a
X1/Z1
X2/Z2
D4 D3 D2 D1
Mode switch
Report code
Note: If you skip to enter the report code, the 1st batch X/Z is executed.
::::
D4 D3 D2 D1
The value (record No. of the batch X/Z file - 1)
In X1 mode,
“Issue daily file report” = 00
“Issue consolidation file report” = 03
In Z1 mode,
“Issue daily file report” = 00
“Issue consolidation file report” = 03
In X2/Z2 mode,
“Issue periodic 1/2 read/reset file report” = 00
(Read/reset and periodic 1/2 are the dependent upon the control flag of the batch X/Z file.)
“Issue periodic 1 file read report” = 01
“Issue periodic 1 file reset report” = 11
“Issue periodic 2 file read report” = 02
“Issue periodic 2 file reset report” = 12
“Issue periodic 1 consolidation file read report” = 04
“Issue periodic 1 consolidation file reset report” = 14
“Issue periodic 2 consolidation file read report” = 05
“Issue periodic 2 consolidation file reset report” = 15
Z1
X2/Z2
Read/reset report
File reset
6 : ~:a
Report code
Mode switch
Report name
PLU reset (no report)
Scanning PLU reset (no report)
Daily
50014
50026
Scanning PLU stock reset (no report)
50065
TK-3200 Dealer's Manual
Report code
Periodic 1 Periodic 2
51114
51214
-------------
-----
153
NINS
Read/reset report
Report sample
Financial report
X
C01
03-04-2006 19:00
MC#01
000001
— X1 mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
X
FLASH
— Report header/title
— Report code
0000071
DECLA
EURO MONEY
GROSS
NET
CAID
CATL
CACAID2
CATL2
CACR+ 2
$13,575.07
-1.36
⁄26.33
-1.73
—
—
—
—
Declared amount of main currency
2734.973
$15,362.37
No
846
$13,601.80
$13,576.43
$13,575.07
-1.36
⁄28.06
⁄26.33
-1.73
$1.29
—
—
—
—
—
—
—
—
—
—
Gross character/gross quantity
Gross amount
Net character/net count
Net amount
Cash in drawer of main currency
Declared cash in drawer amount of main currency
Declared short cash amount
Cash in drawer of sub currency
Declared cash in drawer of sub currency
Declared cash in drawer amount of sub currency
Difference between declared amount and accumulated amount
Declared amount of sub currency
Difference between declared amount and accumulated amount
Individual item/key report
X
C01
03-04-2006
MC#01
X
INDIVIDUAL
19:05
000002
PLU0001
83.933
25.27%
$1,373.39
OLD PRC
$26.35
RED PRC
$18.98
DISCOUNT
$56.37
#000001
SCAN-PLU0001
108
6.10%
76.89
#49012345678904
CASH
No
12
$240.43
DEPT01
15
10%
$780.92
OLD PRC
$29.08
RED PRC
$25.33
DISCOUNT
$30.16
-----------------------TL
207.933
$2,871.63
RED PRC
$44.31
DISCOUNT
$86.53
154
NINS
— X1 mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
— Report header/title
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
PLU character/quantity
Sales ratio/amount
Old price total
Red price total
Discount total
PLU code (4-digit) or Random code (6-digit)
Scanning PLU character/quantity
Sales ratio/amount
Scanning PLU code
Key descriptor/counter
Amount
Key descriptor/quantity
Sales ratio/amount
Old price total
Red price total
Discount total
—
—
—
—
Quantity total
Amount total
Red price total
Discount total
Fixed total report
Z
FIX
DECLA
EURO MONEY
GROSS
19:10
012343
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
0001
0001011
— Report header/title/reset counter (Z only)
— Report code
$13,575.07
-1.36
⁄26.33
-1.73
—
—
—
—
2734.973 —
$15,362.37 —
—
NET
No
846
$13,601.80 —
CAID
$13,576.43 —
CATL
$13,575.07 —
CA$1.36 —
CAID2
⁄28.06 —
CATL2
⁄26.33 —
CA$1.73 —
CR+ 2
$1.29
-----------------------—
RF
No
1
$10.25 —
—
CUST
CT
123
AVRG
$110.58 —
FEE
$2.73 —
+
$10.25 —
C-1
$2.38 —
C-2
$57.46 —
CECA1
¥12,793 —
CECK1
¥1,000 —
CECK4
DM12.56
DC
$95.96 —
COUPON
$10.26 —
REF
$7.68 —
CLEAR
866 —
ROUND
⁄2.55 —
ROUND
$6.37 —
—
CANCEL
No
6
$7.36 —
—
DECLA
No
4
-----------------------TA1
$1,364.76 —
TX1
$136.48 —
EX10
$487.58
NON TAX
$9.75 —
-----------------------GT1
$00000000462846.73 —
GT2
$00000000645230.72 —
GT3
$00000000449096.81 —
011462--->012343 —
TK-3200 Dealer's Manual
Declared amount of main currency
Difference between declared amount and accumulated amount
Declared amount of sub currency
Difference between declared amount and accumulated amount
Gross character/gross quantity
Gross amount
Net character/net count
Net amount
Cash in drawer of main currency
Declared cash in drawer amount of main currency
Declared short cash amount
Cash in drawer of sub currency
Declared cash in drawer of sub currency
Declared cash in drawer amount of sub currency
Refund mode count
Refund mode total
Customer count
Average sales amount per customer
Check cashing service fee total
New balance fee
Clerk commission 1 total
Clerk commission 2 total
Foreign currency cash in drawer 1
Foreign currency check in drawer 1
Read/reset report
Z
03-04-2006
C01 MC#01
Reduction total
Coupon total
Item return total
Clear count
Rounding total of sub currency
Rounding total of main currency
Cancellation count
Cancellation total
Declaration count
Taxable amount 1 total
Tax amount 1 total
Nontaxable amount
Grand total 1
Grand total 2
Grand total 3
Consecutive number range of the day
155
NINS
Read/reset report
Transaction key report
Z
C01
03-04-2006 19:15
MC#01
000004
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
TRANS
— Report header/title/reset counter (Z only)
— Report code
CASH
0001
0001012
— Cash count
— Cash total
— Charge count
CHKP
No
846
$13,601.80
No
12
$31.80
No
1
VOID
No
— Void total
— Validation count
VLD
RCT
STORE
RECALL
No
No
No
No
CH
4
$64.48
3
18
23
23
— Check print count
— Store count
— Recall count
Transaction keys are printed by function code order.
156
NINS
PLU report
All PLU/range/menu report
Z
C01
03-04-2006
MC#01
19:25
000006
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
PLU
0001
0001014
— Report header/title/reset counter (Z only)
— Report code
#000001 - #000500
PLU0001
83.933
25.27%
$1,373.39
OLD PRC
$26.35
RED PRC
$18.98
DISCOUNT
$56.37
#000001
PLU0003
23
4.37%
$63.44
DISCOUNT
$0.00
#000500
-----------------------TL
207.933
$2,871.63
RED PRC
$44.31
DISCOUNT
$86.53
— PLU range (range report only)
—
—
—
—
—
—
PLU character/quantity
Sales ratio/amount
Old price total
Red price total
Discount total
PLU code (4-digit) or Random code (6-digit)
—
—
—
—
Quantity total
Amount total
Red price total
Discount total
By group/department report
TK-3200 Dealer's Manual
—
—
—
—
—
—
—
Classification title (by group/dept.)
PLU character/quantity
Sales ratio/amount
Old price total
Red price total
Discount total
PLU code (4-digit) or Random code (6-digit)
Read/reset report
GROUP01
..........01
PLU0001
83.933
25.27%
$1,373.39
OLD PRC
$26.35
RED PRC
$18.98
DISCOUNT
$56.37
#000001
-----------------------83.933
$1,373.39
RED PRC
$26.35
DISCOUNT
$56.37
........................
PLU0101
9
12.27%
$389.80
OLD PRC
$6.35
RED PRC
$1.98
DISCOUNT
$9.37
#000101
-----------------------9
$389.80
RED PRC
$1.98
DISCOUNT
$9.37
— Total column of this classification
— Not classified items
— Total column of not classified items
-----------------------TL
207.933
$2,871.63
RED PRC
$44.31
DISCOUNT
$86.53
—
—
—
—
Quantity total
Amount total
Red price total
Discount total
157
NINS
Read/reset report
Best 50 report
1..........
PLU0001
83.933
25.27%
$1,373.39
OLD PRC
$26.35
RED PRC
$18.98
DISCOUNT
$56.37
#000001
2..........
PLU0050
67
21.19%
$1,152.06
OLD PRC
$66.75
RED PRC
$38.96
DISCOUNT
$43.37
#000045
50.........
PLU0038
3
6.87%
$373.39
OLD PRC
$2.57
RED PRC
$7.64
DISCOUNT
$8.37
#000038
-----------------------TL
207.933
$2,871.63
RED PRC
$44.31
DISCOUNT
$86.53
—
—
—
—
—
—
—
Ranking
PLU character/quantity
Sales ratio/amount
Old price total
Red price total
Discount total
PLU code (4-digit) or Random code (6-digit)
—
—
—
—
Quantity total
Amount total
Red price total
Discount total
PLU stock report
All PLU/range report
Z
C01
03-04-2006 19:30
MC#01
000008
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
PLU STOCK
— Report header/title
— Report code
0001064
#000001 - #000500
PLU0001
#000001
PLU0002
#000002
158
NINS
10
73
*
10
3
— PLU range (range report only)
—
—
—
—
PLU character/optimum stock quantity
Current stock quantity
PLU code (4-digit) or Random code (6-digit)
* means out of optimum stock quantity
By group/department report
GROUP01
PLU0001
#000001
PLU0002
..........01
15
73
*
15
3
—
—
—
—
—
Classification title (by group/dept.)
PLU character/optimum stock quantity
Current stock quantity
PLU code (4-digit) or Random code (6-digit)
* means out of optimum stock quantity
#000002
GROUP02
PLU0010
#000010
PLU0011
..........02
30
73
20
23
#000011
Department report
Z
C01
03-04-2006 19:30
MC#01
000007
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
DEPT
— Report header/title/reset counter (Z only)
— Report code
0001
0001015
DEPT01
83.933
25.27%
$1,373.39
OLD PRC
$26.35
RED PRC
$18.98
DISCOUNT
$56.37
DEPT02
23
4.37%
$63.44
DISCOUNT
$0.00
-----------------------TL
207.933
$2,871.63
RED PRC
$44.31
DISCOUNT
$86.53
TK-3200 Dealer's Manual
—
—
—
—
—
Department character/quantity
Sales ratio/amount
Old price total
Red price total
Discount total
—
—
—
—
quantity total
Amount total
Red price total
Discount total
Read/reset report
All department report
159
NINS
Read/reset report
Best 50 report
—
1..........
DEPT01
83.933 —
25.27%
$1,373.39 —
OLD PRC
$26.35 —
RED PRC
$18.98 —
DISCOUNT
$56.37 —
2..........
DEPT50
67
21.19%
$1,152.06
OLD PRC
$66.75
RED PRC
$38.96
DISCOUNT
$43.37
50.........
DEPT38
3
6.87%
$373.39
OLD PRC
$2.57
RED PRC
$7.64
DISCOUNT
$8.37
-----------------------TL
207.933 —
$2,871.63 —
RED PRC
$44.31 —
DISCOUNT
$86.53 —
Ranking
Department character/quantity
Sales ratio/amount
Old price total
Red price total
Discount total
Quantity total
Amount total
Red price total
Discount total
Group report
Z
C01
03-04-2006 19:35
MC#01
000008
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
GROUP
— Report header/title/reset counter (Z only)
— Report code
0001
0001016
GROUP01
83.933
25.27%
$1,373.39
GROUP02
23
4.37%
$63.44
GROUP03
45
4.37%
$65.44
-----------------------TL
207.933
$2,871.63
160
NINS
— Group character/quantity
— Sales ratio/amount
— Quantity total
— Amount total
Clerk report
Z
C01
03-04-2006 19:10
MC#01
000008
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
CASHIER
— Report header/title/reset counter (Z only)
— Report code
EURO MONEY
C01
GROSS
NET
CAID
CHID
CKID
CRID
RF
C-1
C-2
CLEAR
$13,575.07
-1.36
⁄26.33
-1.73
—
—
—
—
Declared amount of main currency
...........1
2734.973
$15,362.37
No
846
$13,601.80
$13,576.43
$4.87
$273.97
$28.06
No
1
$10.00
$3.09
$8.93
No
325
—
—
—
—
—
—
—
—
—
Clerk (manager) name/drawer No.
Gross character/gross count
Gross amount
Net character/net count
Net amount
Cash in drawer
Charge in drawer
Check in drawer
Credit in drawer
Difference between declared amount and accumulated amount
Declared amount of sub currency
Difference between declared amount and accumulated amount
— Refund mode total
— Commission amount
— Clear total
-----------------------C02
...........1
GROSS
734
$7,362.37
NET
No 346
$8,601.80
CLEAR
No 315
— Separator between manager and cashier
— Clerk (cashier) name/drawer No.
-----------------------C05
...........1
GROSS
34
$362.37
NET
No
26
$501.80
CLEAR
No
15
— Separator between cashier and clerk
— Clerk name/drawer No.
TK-3200 Dealer's Manual
Read/reset report
DECLA
0001
0001017
161
NINS
Read/reset report
Hourly sales report
Z
C01
03-04-2006 19:45
MC#01
000010
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
HOURLY
— Report header/title/reset counter (Z only)
— Report code
0001
0001019
00:00->01:00
CT
12
$1,373.39
No
12
$1,373.39
GROSS
NET
10.67%
—
—
—
—
—
Time frame
Customer count
Gross total
Net count
Sales ratio/Net amount
01:00->02:00
CT
26
GROSS
$4,253.64
NET
No
12
2.67%
$343.55
-----------------------—
TL
CT 4357
GROSS
$12,871.63 —
—
NET
No 3674
$12,881.00 —
Customer count total
Gross amount total
Net count total
Net amount total
Monthly report
Z
C01
03-04-2006 19:50
MC#01
000011
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
MONTHLY
— Report header/title/reset counter (Z only)
— Report code
1......
GROSS
0001
0001020
198.486
$1,373.39
No
12
$1,373.39
—
—
—
—
—
Day
Gross count
Gross total
Net count
Net amount
498
$4,253.64
NET
No
12
$4,203.64
-----------------------TL
GROSS
74657
$12,871.63
$0.17
NET
No
574
$12,881.00
$22.44
—
—
—
—
—
—
Gross count total
Gross amount total
Average gross sales total
Net count total
Net amount total
Average net sales total
NET
2......
GROSS
162
NINS
Table analysis report
Z
C01
03-04-2006 19:55
MC#01
000012
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
ANALYSIS
— Report header/title/reset counter (Z only)
— Report code
0001
0001028
TBL01
CT
34
10.66%
$1,373.39
TBL02
CT
27
29.24%
$3,767.65
TBL20
CT
23
2.67%
$344.84
-----------------------TL
CT 162
$12,881.00
— Table character/customer count
— Sales ratio/net amount
Z
C01
03-04-2006 20:05
MC#01
000014
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
OPEN CHECK
— Report header/title
— Report code
— Customer count total
— Net amount total
Open check report
REG 03-04-2003 09:02
C01
MC#01
000004
TABLE No.123456
CT 12
CHECK No.123
$250.00
REG 03-04-2003 09:02
C01
MC#01
000006
TABLE No.111111
CT 14
CHECK No.12345678
BUSY
$300.00
-----------------------TL
No
28
$1,374.00
—
—
—
—
—
Mode symbol/date/time
Clerk descriptor/Mc-No./consecutive No.
Table No./No. of customer
Check No.
Subtotal amount
Read/reset report
0001025
— Print “BUSY”, if the check is currently opened.
— No. of open check
— Open check total
✍ Version 1.01
TK-3200 Dealer's Manual
163
NINS
Read/reset report
Scanning PLU report
By group/department report
Z
C01
03-04-2006 20:10
MC#01
000015
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
SCAN PLU
— Report header/title/reset counter (Z only)
— Report code
0001
2001026
DEPT01
......01
SCAN_PLU001
382
17.07%
$1,583.47
#4901234567894
SCAN_PLU002
382
38.01%
$3,526.46
#4989012345674
SCAN_PLU003
382
10.49%
$973.45
#4967890123454
-----------------------1253
$9,275.83
—
—
—
—
Classified title (by group/dept)
Scanning PLU character/quantity
Sales ratio/total
Scanning PLU code
— Total of this classification
DEPT02
......02
SCAN_PLU010
453
17.07%
$1,583.47
#4945678901234
-----------------------243
$10,375.93
-----------------------TL
12653
$273,375.93
164
NINS
— Quantity total
— Amount total
Best 50 report
DEPT01
......01
1......
SCAN_PLU002
382
38.01%
$3,526.46
#4934567890124
2......
SCAN_PLU001
285
#4912345678904
50.....
SCAN_PLU003
72
10.49%
$973.45
#4956789012344
-----------------------1253
$9,275.83
—
—
—
—
—
Classified title
Ranking
Scanning PLU character/quantity
Sales ratio/total
Scanning PLU code
— Total of this classification
DEPT02
......02
1......
SCAN_PLU010
453
17.07%
$1,583.47
#4990123456784
-----------------------1243
$10,375.93
-----------------------TL
12653
$273,375.93
— Quantity total
— Amount total
DEPT01
SCAN_PLU001
......01
3
$5.83
#4901234567894
SCAN_PLU002
0
SCAN_PLU050
0
—
—
—
—
Read/reset report
Inactive report
Classified title
Scanning PLU character/quantity
Sales total
Scanning PLU code
$0.00
$0.00
#4934567890124
-----------------------3
$5.83
DEPT02
SCAN_PLU010
— Total of this classification
......02
0
$0.47
#123456
-----------------------2
$10.93
-----------------------25
TL
$15.93
TK-3200 Dealer's Manual
— Quantity total
— Amount total
165
NINS
Read/reset report
Scanning PLU stock report
Z
C01
03-04-2006 20:22
MC#01
000018
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
SCAN STOCK
— Report header/title/reset counter (Z only)
— Report code
DEPT01
SCAN_PLU001
0001
2001065
......01
382.000
458.347
#4901234567894
SCAN_PLU002 *
382.000
105.000
#4989012345674
—
—
—
—
—
Classified title (by group/dept)
Scanning PLU character/optimum stock quantity
Actual stock quantity
Scanning PLU code
* indicates stock shortage
Mix & match report
Z
03-04-2006 20:25
C01
MC#01
000019
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
— Report header/title/reset counter (Z only)
— Report code
MIX&MATCH
DISCOUNT01
6
$3.00
DISCOUNT02 No
12
$12.00
DISCOUNT03 No
24
$3.00
-----------------------TL
No
65
$75.93
166
NINS
No
0001
0001061
— Mix & match character/count
— Mix & match total
— Count total
— Amount total
Time & attendance report
Z
03-04-2006 20:30
C01
MC#01
000021
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
— Report header/title/reset counter (Z only)
— Report code
ATTENDANCE
0001
0001029
CSHR01
1111111111
03-03-02 08:55->17:09
08:16
03-03-03 08:56->17:11
08:17
03-03-04 08:55->--:---:------------------------TL
16:33
CSHR02
— Employee name/employee No.
— Clock-in/out date/clock-in time/clock-out time
— Work time
— Total work time
2222222222
File reset
Z
C01
03-04-2006 22:25
MC#01
000050
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
PLU
— Report header/title/reset counter
— Report code
PLU Z clear
0001
0051014
Normal End
Read/reset report
PLU reset
— Action/result
Scanning PLU reset
Z
C01
03-04-2006 22:30
MC#01
000051
— Mode symbol/date/time
— Clerk descriptor/Mc-No./consecutive No.
Z
SCAN PLU
— Report header/title/reset counter
— Report code
PLU Z clear
TK-3200 Dealer's Manual
0001
0051026
Normal End
— Action/result
167
NINS
Read/reset report
168
NINS
Application systems
Scanning PLU
You can register items by scanning.
System configuration of the scanning PLU system
Scanner
Setup
1. After connecting a barcode scanner, program I/O parameter table to fit the scanner.
2. Allocate scanning PLU function keys (such as <OBR>, <One touch NLU>, <PRICE CHANGE>, and <PRICE INQUIRY> ). If you use multi price, allocate <PRICE SHIFT> too.
3. Allocate scanning PLU files and non-PLU table file.
4. Program the non-PLU table to suit your scanning system.
5. Program batch maintenance PLU file to add items and broadcast it to all of the terminals.
6. Activate the batch maintenance PLU file.
Barcode system
TK-3200 Dealer's Manual
Scanner
✔
✔
✔
✔
✔
✔
✔
Input method
OBR code <OBR>
13 digits with check digit
8 digits with check digit
11 digits without check digit
6 digits without check digit
13 digits with check digit
8 digits with check digit
11 digits without check digit
One touch NLU
✔
✔
✔
✔
✔
✔
✔
Application systems
Scanning PLU code
EAN-13 (JAN-13)
EAN-8 (JAN-8)
PLU type
UPC-A
UPC-E
EAN-13 (JAN-13)
Non PLU type
EAN-8 (JAN-8)
UPC-A
169
NINS
Application systems
PLU maintenance
There are three ways to maintain scanning PLU, i.e. not found PLU maintenance, batch PLU maintenance and direct PLU
maintenance.
Not found PLU maintenance
When an item which code is not existed in the scanning PLU file is registered, the “Not found” error occurs. You can
register this item by not found PLU maintenance procedure. After this maintenance, this item is registered without the “Not
found” error and stored in the PLU file.
Batch maintenance
Batch maintenance is used for adding items to the scanning PLU file, changing the scanning PLU item programming data
or deleting items from the scanning PLU file.
1 Program the batch maintenance PLU file.
2 Activate the batch maintenance file.
1
Register
Scanning
PLU file
2
Batch maintenance PLU file
Direct maintenance
Direct maintenance is used for adding items to the scanning PLU file, or changing the scanning PLU item programming
data.
1 Program the direct maintenance PLU file.
1
Register
Scanning
PLU file
Direct maintenance PLU file
170
NINS
Scanning PLU registration
By scanner/code input/one touch NLU key
OPERATION
Scan-PLU ($2.35)
Item 1 —————————
(scan) PLU code 49012347
—————————————
Scan-PLU ($2.00)
Item 2 —————————
(code) PLU code 123456
—————————————
Scan-PLU ($1.23)
Item 3 —————————
(OTN) PLU code 49012354
—————————————
Payment Cash
$5.58
RECEIPT
“Scanning”
123
OBR
456B
Scanning-PLU code and
OBR key
NLU
B
1 PLU0001
#49012347
1 PLU0002
#123456
1 PLU0003
#49012354
TL
CASH
•2.34
— Scanning PLU code *1
•2.00
•1.23
•5.58
•5.58
*1
One touch NLU
Programmable option
F
Not found PLU item
OPERATION
Scan-PLU ($1.00)
—————————
Item 1 PLU code 49012361
(scan) —————————
Dept.
1
—————————————
Scan-PLU ($1.00)
Item 2 —————————
(scan) PLU code 49012361
—————————————
Payment Cash
$2.00
“Scanning”
Does not exist in the scanning
PLU file
“Not Found Error”
100!
Input price and press the linked
department key.
RECEIPT
1 DEPT01
#49012361
1 DEPT01
#49012361
TL
CASH
•1.00
— Link department
descriptor/amount
•1.00
•2.00
•2.00
“Scanning”
Register normally.
Application systems
F
TK-3200 Dealer's Manual
171
NINS
Application systems
Price change operation
When a scanning PLU item is programmed to enable to change price, you can change the unit price
temporarily. The preset price in the scanning PLU file is not changed by this operation. You can restrict the
temporary price is less/greater than the programmed unit price by the general function program.
OPERATION
PRC
($1.20)
100B
CHG
Scan-PLU
↓
Temporary unit price
$1.00
Item —————————
PLU code 49012361
“Scanning”
————————— This item should be programmed as
Dept.
1
“Enable to price change.”
—————————————
Payment Cash
$1.00
F
RECEIPT
1 SCAN-PLU0001
•1.00
#49012361
TL
•1.00
CASH
•1.00
Force to enter price manually
When a scanning PLU item is programmed to force to enter unit price, you must enter the unit price. The preset
price in the scanning PLU file is not changed by this operation. You can restrict the temporary price is less/
greater than the programmed unit price by the general function program.
OPERATION
($1.20)
“Scanning”
↓
The message “Input Price” is shown.
$1.00
Item —————————
PRICE
PLU code 49012361
100B
—————————
Dept.
1
—————————————
Payment Cash
$1.00
F
Scan-PLU
RECEIPT
1 SCAN-PLU0001
•1.00
#49012361
TL
•1.00
CASH
•1.00
Multiple price
Before registering multiple price PLU, allocate <PRICE SHIFT> and program the appropriate price shift
number to the key.
OPERATION
Scan-PLU
“Scanning”
(1st rec.) ($1.00)
Item 1 ————————— No <PRICE SHIFT> designates the
1st record of the item.
PLU code 49016321
PRC
—————————————
B
SFT2
Scan-PLU
(2nd rec.) ($2.00)
“Scanning”
Item 2 —————————
PLU code 49016321
—————————————
PRC
Scan-PLU
B
SFT3
(3rd rec.) ($6.00)
Item 3 —————————
“Scanning”
PLU code 49016321
—————————————
F
Payment Cash
$9.00
172
NINS
RECEIPT
1 SCAN-PLU(1st)
•1.00
#49016321
1 SCAN-PLU(2nd)
•2.00
#49016321
1 SCAN-PLU(3rd)
•6.00
#49016321
TL
•9.00
CASH
•9.00
Mix & match discount
There are three types of mix & match processing:
• Discount 1 (discount every required quantity)
• Discount 2 (discount one time per one transaction)
• Discount 3 (discount continuously)
Mix & match discount affects to the item totalizer, link dept/subdept totalizer and link dept/subdept discount
totalizer, when the “Net totaling” option is selected.
Discount type 1:
In this type of processing, a discount is made when the quantity of a particular scanning PLU reaches a certain number
during registration.
For example, assume that when three units of a particular scanning PLU, $0.34 a piece, are sold at $1.00. In this case, a
discount is made automatically when the third unit of that scanning PLU is registered.
OPERATION
Scan-PLU ($0.34)
—————————
Item PLU code 49012361
—————————
Quantity
3
—————————————
Discount type 1: 3/
$0.02
—————————————
Payment Cash
$1.00
“Scanning”
“Scanning”
“Scanning”
Mix & match discount is made.
F
RECEIPT
1 SCAN-PLU0001
•0.34
#49012361
1 SCAN-PLU0001
•0.34
#49012361
1 SCAN-PLU0001
•0.34
#49012361
DISCOUNT01
-0.02
TL
•1.00
CASH
•1.00
— Discount amount
Discount type 2:
In this type of processing, a discount is made when the quantity of a particular scanning PLU reaches a certain number
during registration. But this discount is made only one time per one transaction.
Scan-PLU ($0.34)
—————————
Item PLU code 49012361
—————————
Quantity
6
—————————————
Discount type 2: 3/
$0.02
—————————————
Payment Cash
$2.02
“Scanning”
“Scanning”
“Scanning”
Mix & match discount is made.
“Scanning”
“Scanning”
“Scanning”
Mix & match discount is not
made.
F
TK-3200 Dealer's Manual
RECEIPT
Application systems
OPERATION
1 SCAN-PLU0001
•0.34
#49012361
1 SCAN-PLU0001
•0.34
#49012361
1 SCAN-PLU0001
•0.34
#49012361
DISCOUNT01
-0.02
1 SCAN-PLU0001
•0.34
#49012361
1 SCAN-PLU0001
•0.34
#49012361
1 SCAN-PLU0001
•0.34
#49012361
•2.02
TL
CASH
•2.02
173
NINS
Application systems
Discount type 3:
In this type of processing, a discount is made when the quantity of a particular scanning PLU reaches a certain number
during registration. And this discount is made after this item registration.
OPERATION
Scan-PLU ($0.34)
“Scanning”
—————————
Item PLU code 49012361
“Scanning”
—————————
Quantity
4
“Scanning”
—————————————
Mix & match discount is made.
Discount type 3: 3/ $0.02
—————————————
Payment Cash
$1.32
“Scanning”
Mix & match discount is made.
F
Check tracking system
System configuration
Slip printer
External printer
Up to 2 external printers
174
NINS
RECEIPT
1 SCAN-PLU0001
•0.34
#49012361
1 SCAN-PLU0001
•0.34
#49012361
1 SCAN-PLU0001
•0.34
#49012361
DISCOUNT01
-0.02
1 SCAN-PLU0001
•0.34
#49012361
DISCOUNT01
-0.02
TL
•1.32
CASH
•1.32
Printing on the external printers
You can print receipts/orders on external printer. Maximum 2 external printers can be connected to a terminal. It is possible
to print out to another printer (i.e. another external, or internal R/J) for backup.
The printouts from R/J printer and external printer can be divided into 3 types; 1. Receipt type, 2. Report type, and 3. Order
type.
For receipt type, only <RECEIPT> and <BILL> have this option – Receipt 1/Receipt 2/Receipt 3 – of the target printer; R/
J, external 1, or external 2.
For report type, you can define one target printer; R/J, external 1 or external 2.
For order type, each item has its own option – Order1/Order 2/Order 3 – of the target printer; R/J, external 1, or external 2.
Item/key
programming
<BILL>
<RECEIPT>
• Receipt type
Receipt type definition
Printer definition
Receipt type 1 ~ 3
I/O parameter
of this terminal
Own R/J
Main = R/J, external1, or
external 2
Backup = R/J, external 1, or
external 2
Report type
Main = R/J, external1, or
external 2
Backup = R/J, external 1, or
external 2
• Report type
<DEPT>
<PLU/Flat PLU>
• Order type
Order type definition
local 1 =
COM port
Printer model
local 2 =
COM port
Printer model
Order type 1 ~ 3
external
1
external
2
Main = R/J, external1, or
external 2
Backup = R/J, external 1, or
external 2
System configuration of the external printer system
• Maximum 2 printers/1 terminal (Refer to the system configuration chapter.)
• External printer buffer (file 049) should be allocated. (Refer to the program 5 chapter.)
1. Program the target printer (Order1, Order 2, Order 3) to each item by address 16 of the item individual feature programming.
2. Program the target printer (Receipt 1, Receipt 2, Receipt 3) to <BILL> or <RECEIPT>. If you want to print out these
receipt to an external printer, select “Buffered print” of the address 05 of the general function program.
3. Program the main printout destination and backup destination to the printer connection table.
4. Program the I/O parameter table to define the peripheral devices including external printer(s).
Note: FC operation is necessary, if you change the I/O parameter table.
Backup system
If the main destination printer is out of order (such as power failure, or paper out), the terminal sends this data to the
backup destination printer automatically.
Note:
1. The destination of normal registrations is “Receipt 1” (fixed).
“Buffered print” of the address 05 of the general function is necessary.
2. The destination of post receipts/guest receipts is programmable.
“Buffered print” of the address 05 of the general function is NOT necessary.
3. The destination of bill copy is programmable.
“Buffered print” of the address 05 of the general function is necessary.
4. You cannot back up the printouts to the R/J printer to external printers.
That is, R/J printer is the last backup printer.
TK-3200 Dealer's Manual
175
NINS
Application systems
Setup
Application systems
Printing control options for order
Below shows the summary of the programmable options for order printing.
Programmable option
Number of feed lines before order printing (1 ~ 9)
Number of feed lines after order printing (1 ~ 9)
Cut order
Show guidance for backup print of order.
Alert when the external printer goes down.
Baud rate
Backup destination
Merge the same item registration on order receipt.
(Item consolidation)
Breakdown set menu printing on order.
Print order with amount.
Print order with order character.
Print order even if training clerk is registered items.
Printing color of order
Definition of order 1 ~ 3
Definition of order character
for R/J
for
local/
remote
printer
✔
✔
✔
✔
✔
✔
✔
Address code 19 of the general control program
Address code 19 of the general control program
Address code 19 of the general control program
Address code 19 of the general control program
Address code 19 of the general control program
I/O parameter table
Printer connection table
Address code 19 of the general control program
✔
✔
✔
✔
✔
✔
✔
Address code 19 of the general control program
Address code 19 of the general control program
Address code 19 of the general control program
Address code 19 of the general control program
Address code 16 of item program
Address code 16 of item program
Address code 16 of item program
✔
✔
✔
✔
✔
✔
✔
✔
Program
location
Time and attendance
You can control your employees’ working time.
For this function, the employee file (file 061), the time and attendance file (file 019) and the <CLOCK-IN/OUT> key is
necessary.
Note: Use this function by one fixed terminal, even if the system has other terminals. Since the
employee file and time & attendance file cannot be collected or consolidated.
Clock-in operation
1. Press the <CLOCK-IN/OUT> key, enter employee number and press the <CLOCK-IN/OUT> key. And then press the
<CASH> key.
If you enter the employee number who has clocked in already, this operation is treated as clocked-out.
Clock-out operation
1. Press the <CLOCK-IN/OUT> key, enter employee number and press the <CLOCK-IN/OUT> key. And then press the
<CASH> key.
If you enter the employee number who does not have clocked in yet, this operation is treated as clocked-in.
176
NINS
Tips
Future order
This is an enhancement of the training function.
By using the original training specification, the training clerk cannot accept any customer. Because no journal printing and
no memory affection of this function is made.
By using “Future order”, you can get this sales data and journal printing even if the transaction is registered by the training
clerk.
Usage
Receipt issuance: OFF
1. Start training. (Sign on a training clerk.)
During training
2. Register items and finalize this transaction.
In case of accepting a customer
3. Register items and finalize this transaction.
4. Issue receipt or slip. (Press <GUEST RECEIPT> or <SLIP PRINT>.)
Journal printing and memory affection is made at this point.
:
5. End training. (Sign off the clerk.)
Preparation
1. Allocate <GUEST RECEIPT> or <SLIP PRINT>. (See program 4.)
2. Set training flag to the training clerk. (See clerk program in the program 3 mode.)
3. Set the option “print journal when the key is pressed” to the key <GUEST RECEIPT>, <SLIP PRINT>.
4. Set to affect training registrations to the periodic 1 (or 2) total, all registrations (both normal and training) to the periodic 2
(or 1) by the address code 16 of the general control program in the program 3 mode.
5. Set space to the training filler and future order message in the special character table in the program 2 mode.
Eat-in/takeout
This function is used for specifying if the customer eat in the restaurant or takeout. When the <EAT-IN> or <TAKEOUT>
is pressed before finalize operation, the “Eat-in/takeout” compulsion is released and the tax exemption is applied.
After pressing <EAT-IN> or <TAKEOUT>, only finalize operation is possible.
The compulsion is released by <OPEN2>, so be sure to allocate this key before using this function.
1 HAMBURGER
1 POTATO
1 COKE
TAKE-OUT
TK-3200 Dealer's Manual
Tips
Receipt sample
•2.00
•1.50
•1.00
177
NINS
Tips
Automatic execution of Euro switchover by arrangement and scheduler
The following sample shows an automatic execution program of arrangement and scheduler.
Sample program
Execution date/time:
Currency definition type:
Currency conversion rate:
Drawer of sub currency:
Unit price conversion:
31. December 2003 23:59
3 (Main currency = Euro, Sub currency = Local, Change = Euro)
1 Euro = 6.55957 F Franc
Main
Yes
• Arrangement
*2
PGM
*1
6 3s 6 : ~ : 38s 6 A 6 : ~ : a 6
Arrangement table No. (up to 6 digits)
Record No.
Mode switch
6
Turn the mode
switch to X. 6
Press the appropriate clerk button.
(In case of clerk button system)
*3
6
601072002s 6 a 6
6 3a 6 6^55957a6
Skip this step, when the exchange rate has been set already.
6 0a 6 0a 6
*4
*1
Turn the mode 6 A 6 s
switch to PGM.
The same A should be pressed.
Vacant record search: If you want to set an arrangement program to a new record, “vacant record search” is
possible. (enter 0000 instead of entering a record No.)
*3
A clerk who is programmed to enable to operate in X1 mode must be signed on.
*4
If necessary, sign on the original clerk who is programmed to disable to operate in X1 mode.
*1
*2
• Scheduler
PGM
Mode switch
63s 6 :
~
: 62s6
Record No.
6 : : 0010a6 :
Clerk record No.
• Set a clerk who is programmed to
enable to operate in X1 mode.
~
: a6
Above arrangement table No,
(up to 6 digits)
6 0312312359a 6 s
Execution date/time
178
NINS
Appendix: Calculation method
The following calculation methods of totalizer memories are explained in this chapter.
• All formulas in these explanations are calculated in the registration mode.
• In the RF mode, the values in totalizers are calculated using the opposite sign.
• In the REG– mode, the value in totalizers and counters are calculated using the opposite sign.
Fixed total file
Gross sales amount
In gross/net calculation:
1) When gross calculation is
specified
2) When net calculation is
specified
Net sales quantity
Net sales amount
TK-3200 Dealer's Manual
Increments or Decrements by
Number of products registered for Departments + PLUs + Scanning PLUs (non hash)
{For Department, PLUs and Scanning PLUs
Single items
: +1
Multiplication
: Input quantity
Split price
: Input quantity
Square
: Input quantity × Input quantity
Cube
: Input quantity × Input quantity × Input quantity}
– Last item void – Return item – Previous item void – Cancel
Number of products registered for Departments + PLUs + Scanning PLUs (non hash)
{For Department, PLUs and Scanning PLUs
Single items
: Preset or manually input prices
Multiplication
: Preset or manually input prices × Input quantity
Split price
: (Preset or manually input prices / Input unit quantity)
× Input quantity
Square
: Preset or manually input prices × Input quantity
× Input quantity
Cube
: Preset or manually input prices × Input quantity
× Input quantity × Input quantity}
– Last item void – Return item – Previous item void – Cancel
Appendix (Calculation method)
Total or Counter
Gross sales quantity
Adjustment amounts in Minus, Plus, Discount (%–), Premium (%+), Coupon transactions
are not reflected.
Adjustment amounts in Minus, Plus, Discount (%–), Premium (%+) Coupon transactions are
reflected.
+1 (When a transaction is finalized for sale. For REG– mode –1 is affected.)
{Department + PLU + Scanning PLU product registration amounts
– Last item void amounts for the above
– Item return amounts for the above
– Previous item void amounts for the above
– Cancel amounts for the above}
+ {Plus (+ key)
+ Premium (%+ key)
– Error correction amounts
– Cancel amounts}
– {Minus (– key)
– Discount(%– key)
– Coupon
– Error correction amounts
– Cancel amounts}
+ {Manual tax
– Error correction amounts
– Cancel amounts}
+ Results of tax table calculations (add-on tax)
179
NINS
Appendix (Calculation method)
Total or Counter
Medium in drawer
(Cash, charge, check, credit)
Declared short medium
amount
Declared over medium
amount
Number of RF mode items
RF mode amount
Customer count
Average sales per customer
Check cashing service fee
New balance fee
Clerk commission total
Foreign currency in cash
drawer
Foreign currency in check
drawer
Discount amount
Coupon amount
Item return amount
Clear count
Declaration count
Rounding
Taxable amount
Tax amount
GT 1
GT 2
GT 3
180
NINS
Increments or Decrements by
Sales total or tendered total by specified medium
+ Received on account total (Cash in drawer only)
– Paid out (Cash in drawer only)
+ Loan totals (by selected medium)
– Pick up totals (by selected medium)
– Change amounts (Cash in drawer only)
– Total of check cashing transaction (When specified as cash in drawer)
Declared medium in drawer
– Medium in drawer
(Only effective when the result of this formula becomes negative)
Medium in drawer
– Declared medium in drawer
(Only effective when the result of this formula becomes negative)
+1 (When cash sales, charge sales, credit sales, and check sales transaction are finalized in
the RF/REG– mode.)
Absolute value of total sales amount for RF/REG– mode registrations.
Entered number of covers
Net sales amount / Customer count
+ Check amount × Service ratio or
+ Service fee amount
+ MD/ST amount × Service charge ratio or
+ Service charge fee amount
Item sales (commissionable) × Clerk commission rate
Entered amount in cash payment in foreign currency.
Entered amount in check payment in foreign currency.
+ Registered amount of Minus/Discount key
+ Registered amount of Coupon key
+ Registered item amount by RF/Void key
+ 1 (REG, RF, REG– mode)
(When the <CLEAR> key is pressed.)
+ 1 (whenever declaration is performed)
+ Fraction amount by roundings
(Roundings include IF1/2, Danish, Norwegian, Singaporean, and Finnish.)
Subtotal of taxable amount at finalization of sale
(in case of add-on tax)
Subtotal of taxable amount – VAT
(in case of add-in tax)
Result of calculation using tax table for taxable amount at finalization of sales
Grand total of net sales totals
Absolute value of
{Registration amount (Department, Subdepartment, PLU)
+ Last item void amount
+ Previous item void amount
+ Refund amount}
+ {Plus, Minus, Premium, Discount, Coupon
+ Last item void amount}
+ Tax
Net sales total
– add-on tax
– add-in tax
– commission
Appendix: Font code tables
These models have the capability to print/display in Slavic, Greek, Cyrillic, Baltic, Arabic fonts.
If you want to use these special font set, initialize the machine and enter the special initialization code (D14 ~ D12) before the
original code 1 (D11 ~ D1). (Refer to the initialization chapter.)
Standard font set (default)
Multilingual + Euro (Windows code page 858)
32
0
48
@
64
P
80
33
1
49
A
65
Q
81
a
"
34
2
50
B
66
R
#
35
3
51
C
67
S
$
36
4
52
D
%
37
5
53
E
&
38
6
'
39
7
(
Space
!
96
p
112
97
q
113
82
b
98
r
114
83
c
99
s
115
68
T
84
d
100
t
116
69
U
85
e
101
u
117
54
F
70
V
86
f
102
v
118
55
G
71
W
87
g
103
w
119
40
8
56
H
72
X
88
h
104
x
120
)
41
9
57
I
73
Y
89
i
105
y
121
*
42
:
58
J
74
Z
90
j
106
z
122
+
43
;
59
K
75
^
91
k
107
{
123
,
44
<
60
L
76
¥
92
l
108
|
124
45
•
61
M
77
[
93
m
109
}
125
46
>
62
N
78
\
94
n
110
~
126
47
?
63
O
79
]
95
o
111
.
/
Appendix (Font table)
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
127
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
Ç
ü
128
É
144
á
160
176
129
æ
145
í
é
130
Æ
146
ó
162
â
131
ô
147
ú
163
ä
132
ö
148
ñ
164
à
133
ò
149
Ñ
165
Á
å
134
û
150
ª
166
Â
ç
135
ù
151
º
167
À
ê
136
ÿ
152
¿
168
©
ë
137
Ö
153
®
169
161
192
208
ó
209
225
178
194
Ê
210
ô
226
_
242
179
195
Ë
211
ò
227
3/4
243
180
196
È
212
õ
228
¶
244
181
197
⁄
213
Õ
229
§
245
182
ã
198
Í
214
µ
230
÷
246
183
Ã
199
Î
215
p
231
¸
247
184
200
Ï
216
P
232
°
248
185
201
217
Ú
233
¨
249
218
Û
234
•
250
235
1
251
236
3
252
237
2
253
138
154
ï
139
ø
155
1/2
171
187
203
219
Ù
î
140
£
156
1/4
172
188
204
220
y
ì
141
Ø
157
¡
221
Y
Ä
142
‹
158
«
222
143
ƒ
159
»
TK-3200 Dealer's Manual
241
193
¬
Å
240
±
177
170
-
ß
Ü
è
224
D
186
202
173
¢
189
205
|
174
¥
190
206
Ì
175
ı
191
¤
207
223
238
239
254
Double
size
255
181
NINS
Appendix (Font table)
Special font set
Slavic (Windows code page 852)
Special initialization code D14 D13 D12 = 010
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
Chara Code Chara Code
Ç
128
É
144
á
160
176
192
208
Ó
224
–
240
ü
129
Ĺ
145
í
161
177
193
Đ
209
ß
225
˝
241
é
130
ĺ
146
ó
162
178
194
Ď
210
Ô
226
â
131
ô
147
ú
163
179
195
Ë
211
M
227
ä
132
Ą
164
133
149
ą
165
g
134
ö
L˘
˘l
148
u
150
Ž
ç
135
Ś
151
ž
242
˙
243
180
196
212
ń
228
˘
244
Á
181
197
Ň
213
ň
229
§
245
166
Ã
182
Ă
198
Í
214
Š
230
÷
246
167
E
183
ă
199
Î
215
231
,
247
Ș
ě
l
136
ś
152
Ę
168
184
200
216
š
´
R
232
°
248
ë
137
Ö
153
ę
169
185
201
217
Ú
233
¨
249
V
138
Ü
154
170
186
202
218
ŕ
234
•
250
o
139
Ť
155
ź
171
187
203
219
V
235
ű
251
î
140
156
C
172
188
204
220
y
236
R
252
ź
141
Ł
157
ș
173
Ż
189
205
Ţ
221
Y
237
r
253
Ä
142
158
«
174
ż
190
206
Ů
222
ţ
238
G
143
č
159
»
175
ı
191
¤
207
223
´
239
254
Double
size
255
Greek
Special initialization code D14 D13 D12 = 020
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
A
128
P
144
È
160
176
192
208
ˆ
224
≡
240
B
129
™
145
Î
161
177
193
209
¿
225
±
241
°
130
T
146
Ï
162
178
194
210
¤
226
≥
242
¢
131
Y
147
Ì
163
179
195
211
‹
227
≤
243
E
164
180
196
212
˚
228

244
229

245
230
÷
246
247
132
º
148
Ó
Z
133
X
149
Í
165
181
197
213
›
H
134
æ
150
Ô
166
182
198
214
fi
£
135
ø
151

167
183
199
215
‡
231
≈
I
136
·
152
Ú
168
184
200
216
¸
232
°
248
K
137
‚
153
Û
169
185
201
217
Ò
233
138
Á
154
˜
170
186
202
218
ø
234
•
.
249
§
M
139
‰
155
Ù
171
187
203
219
‰
235
√
251
N
140
Â
156
Ó
172
188
204
220
∞
236
n
252
221
∅
237
2
253
238
239
141
˙
157
Ê
O
142
Ë
158
¯
174
190
206
222
∈
¶
143
ı
159
„
175
191
207
223
∩
•
182
NINS
Chara Code Chara Code
173
189
205
250
254
Double
size
255
Cyrillic (Windows code page 866)
Special initialization code D14 D13 D12 = 030
Ä
128
ê
144
‡
160
176
192
Å
129
ë
145
·
161
177
Ç
130
í
146
‚
É
162
131
ì
147
„
163
Ñ
132
î
148
‰
E
133
ï
149
Â
Ü
134
ñ
150
á
135
ó
151
à
Chara Code Chara Code
208

224
›
240
193
209
Ò
225
fi
241
178
194
210
Ú
226
∏
242
179
195
211
Û
227
π
243
164
180
196
212
Ù
228
Ï
244
165
181
197
213
ı
229
245
Ê
166
182
198
214
ˆ
230
ï
˘Y
Á
167
183
199
215
˜
231
y˘
247
168
184
200
216
¯
232
°
248
˘
233
249
234
•
.
˜
251
136
ò
152
Ë
â
137
ô
153
È
169
185
201
217
ä
138
ö
154
Í
170
186
202
218
˙
ã
139
õ
155
Î
171
187
203
219
˚
235
å
140
ú
156
Ï
172
188
204
220
¸
236
ç
141
ù
157
Ì
173
189
205
221
˝
237
é
142
û
158
Ó
174
190
206
222
˛
238
è
143
ü
159
Î
175
191
207
223
fl
239
n
2
246
250
252
253
254
Double
size
255
Appendix (Font table)
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
Baltic
Special initialization code D14 D13 D12 = 040
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
Chara Code Chara Code
128
144
160
176
Ą
192
S
208
b
224
s
240
129
145
161
177
˛I
193
M
209
˛i
225
m
241
130
146
¢
162
178
Ã
194
N
,
210
ã
226
n,
242
131
147
£
163
179
G
195
Ó
211
g
227
ó
243
148
¤
164
180
Ä
196
Õ
212
ä
228
õ
244
165
181
Å
197
Õ
213
å
229
õ
245
ö
246
132
133
•
149
134
150
166
182
F
198
Ö
214
f
230
135
151
§
167
183
E
199
x
215
e
231
136
152
Ø
168
184
C
200
U
,
216
c
232
137
153
185
É
201
L
217
é
138
154
186
Ź
202
Ś
218
ź
ø
169
R
,
170
r,
°
247
u,
248
233
l
249
234
ś
250
139
155
187
E
203
U
219
e°
235
u
251
140
156
172
188
G
,
204
Ü
220
236
ü
252
141
157
173
189
K,
205
W
221
g,
k,
237
w
253
142
158
174
190
I
L,
206
Z
222
i
238
z
254
239
Double
size
255
143
159
TK-3200 Dealer's Manual
«
Æ
171
175
»
æ
191
207
ß
223
l,
183
NINS
Appendix (Font table)
Arabic
Special initialization code D14 D13 D12 = 050
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
°
.
128
144
160
176
192
208
224
240
129
∞
145
161
177
193
209
225
241
•
130
ø
146
162
178
194
210
226
242
√
131
±
147
£
163
179
195
211
227
243
132
1/2
148
¤
164
180
196
212
228
244
133
1/4
149
165
181
197
213
229
245
134
~
150
166
182
198
214
230
246
135
«
151
167
183
199
215
231
247
136
»
152
168
184
200
216
232
248
137
153
169
185
201
217
233
249
138
154
170
186
202
218
234
250
139
155
171
187
203
219
235
251
140
156
172
188
204
220
236
252
141
157
173
189
205
221
237
253
142
158
174
190
206
222
238
143
184
NINS
Chara Code Chara Code
ß
159
175
191
207
223
239
254
Double
size
255
Appendix: Peripheral device configuration
UP-360
Dip switch is located at the bottom of the printer.
Function
Reset by DTR
reserved
Protocol
Transmision speed
ON
OFF
Yes
No
--DTR/DSR
fixed
XON/XOFF
See transmission
speed setting
Parity
See paritysetting
undifined
Low power comsumption
undifined
---
---
Yes
---
No
---
ON
OFF
SP-1300
SW No.
1
2
3
4
5
6
7
8
9
10
UP-360 Bottom view
Transmission
speed setting
bps
4800
9600
19200
38400
Parity setting
SW No.
4
5
OFF OFF
OFF ON
ON OFF
ON ON
Non
Even
Odd
Non
SW No.
7
6
OFF OFF
OFF ON
ON OFF
ON ON
Appendix (Peripheral configuration)
SW No.
1
2
3
1 4
5
6
7
8
9
10
DIP switch under the document table
Function
Baud rate setting
Data length
Parity check
Parity
Handshake
Receive buffer size
Character code set
Pin 6 (DSR) reset signal
Pin 25 (INIT) reset signal
See baud rate setting
8 bits
Disabled
Odd
DTR/DSR
2 kbytes *
Katakana
Enabled
Enabled
7 bits
Enabled
Even
XON/XOFF
35 bytes
PC437
Disabled
Disabled
ON
OFF
1
2
3
4
5
6
7
8
9 10
Baud rate setting
bps
1200
2400
4800
9600
SW No.
7
8
OFF OFF
ON OFF
OFF ON
ON ON
* Please select this option.
TK-3200 Dealer's Manual
185
NINS
Appendix (Peripheral configuration)
Quick scan 6000
Select these options:
1. Interface selection:
SNI RS-232C interface selection
2. Baud rate:
Baud rate = 9600 bps
3. Data format settings:
Parity = Odd
Stop bits = One
Data bits = Eight bits
4. Software control:
Hardware control = Enable CTS/RTS flow control
Software control = Disable Xon/Xoff
5. RS-232C ACK/NAK options:
ACK/NAK enable = Disable ACK/NAK
6. Setting symbology specific label identifiers:
Transmit label I.D. as prefix
“SNI RS232C” default value:
1. General features:
Audible signal = Enable
Power-up beeping = Enable
Beeper volume = Low
Beeper duration = 100ms
When to beep = Beep/LED after decode
Low power mode = Disable
Debug mode = Disable
Auto sense stand mode = Disable
186
NINS
2. RS-232 I/F settings:
RS-232 I/F = N/A
SNI RS-232 I/F = Enable
Baud rate = 9600
Parity = Odd
Stop bit = 1
Data bit = 8
Hardware control = Use CTS/RTS flow control
Software control = Disable = Xon/Xoff
Intercharacter delay = 0
Keyboard wedge I/F settings:
KBD wedge I/F type = N/A
External keyboard/No keyboard = N/A
Send control characters = N/A
Intercharacter delay = N/A
3. Label transmit format config items:
Prefix = Disable
Suffix = Global D00
Label I.D. control = Transmit as prefix
UPC-A label I.D. = 4100
4. Symbology:
UPC/EAN = Enable
5. UPC/EAN options:
UPC-A to EAN-13 expansion = Expand
UPC-E to UPC-A expansion = Don’t expand
EAN-8 to EAN-13 expansion = Don’t expand
UPC-E to EAN-13 expansion = Don’t expand
Appendix: File record format
Fixed totalizer file
Fixed totalizer (daily)
File name: Fixed totalizer (daily)
0
12
Character
17
Counter
File No.: 001 Max. allocatable records: 99(fixed)
22
Totalizer
Fixed totalizer (periodic/consolidation)
File name:
File name:
File name:
File name:
File name:
5
Counter
Rec No.
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
033
File No.:
File No.:
File No.:
File No.:
File No.:
101
201
301
401
501
Max. allocatable records:
Max. allocatable records:
Max. allocatable records:
Max. allocatable records:
Max. allocatable records:
99(fixed)
99(fixed)
99(fixed)
99(fixed)
99(fixed)
10
Totalizer
Description
Gross sales total
Net sales total
Cash in drawer
Cash declared amount
Declared short cash amount
Declared over cash amount
Charge in drawer
Charge declared amount
Declared short charge amount
Declared over charge amount
Check in drawer
Check declared amount
Declared short check amount
Declared over check amount
Credit 1 in drawer
Credit 2 in drawer
Credit 3 in drawer
Credit 4 in drawer
Credit declared amount
Declared short credit amount
Declared over credit amount
Cash in drawer *
Cash declared amount *
Declared short cash amount *
Declared over cash amount *
Charge in drawer *
Charge declared amount *
Declared short charge amount *
Declared over charge amount *
Check in drawer *
Check declared amount *
Declared short check amount *
Declared over check amount *
TK-3200 Dealer's Manual
Rec No.
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
051
052
053
054
055
056
057
058
059
060
061
062
063
064
065
066
Description
Credit 1 in drawer *
Credit 2 in drawer *
Credit 3 in drawer *
Credit 4 in drawer *
Credit declared amount *
Declared short credit amount *
Declared over credit amount *
not used
not used
not used
not used
Refund mode total
Customer count
Average sales per customer
Check cashing service fee
New balance fee
not used
Clerk commission 1 total
Clerk commission 2 total
Foreign currency cash in drawer 1
Foreign currency check in drawer 1
Foreign currency cash in drawer 2
Foreign currency check in drawer 2
Foreign currency cash in drawer 3
Foreign currency check in drawer 3
Foreign currency cash in drawer 4
Foreign currency check in drawer 4
Reduction
Coupon
Item return
Clear counter
Rounding2 *
Rounding1
Rec No.
Description
067 Cancellation
068 Money declaration count
069 Taxable amount 1
070 Tax 1
071 Tax exempt 1
072 Taxable amount 2
073 Tax 2
074 Tax exempt 2
075 Taxable amount 3
076 Tax 3
077 Tax exempt 3
078 Taxable amount 4
079 Tax 4
080 Tax exempt 4
081 Taxable amount 5
082 Tax 5
083 Tax exempt 5
084 Taxable amount 6
085 Tax 6
086 Tax exempt 6
087 Taxable amount 7
088 Tax 7
089 Tax exempt 7
090 Taxable amount 8
091 Tax 8
092 Tax exempt 8
093 Taxable amount 9
094 Tax 9
095 Tax exempt 9
096 Taxable amount 10
097 Tax 10
098 Tax exempt 10
099 Nontaxable amount
* Totalizers for sub currencies
Appendix (File record format)
0
Fixed totalizer (periodic 1)
Fixed totalizer (periodic 2)
Fixed totalizer (daily consolidation)
Fixed totalizer (periodic 1 consolidation)
Fixed totalizer (periodic 2 consolidation)
187
NINS
Appendix (File record format)
Transaction key file
Transaction key (daily)
File name: Transaction key (daily)
2
File No.: 002
14
Function code
0
Character
21
Program
25
30
Max. allocatable records: 999
35
@/Rate Counter Totalizer
Transaction key (periodic/consolidation)
File name:
File name:
File name:
File name:
File name:
0
Transaction key (periodic 1)
Transaction key (periodic 2)
Transaction key (daily consolidation)
Transaction key (periodic 1 consolidation)
Transaction key (periodic 2 consolidation)
5
Counter
File No.:
File No.:
File No.:
File No.:
File No.:
102
202
302
402
502
Max. allocatable records: 999
Max. allocatable records: 999
Max. allocatable records: 999
Max. allocatable records: 999
Max. allocatable records: 999
10
Totalizer
PLU file
PLU (daily)
Character
52
57
62
Discount
Totalizer totalizer
23
25
Program
Link
72
77
67
Old
Red
amount amount
totalizer totalizer
28
31
@
34
37
40
43 44
47
52
Minimum
stock
Bottle/setmenu link
16
Unit quantity
0
Max. allocatable records: 5000
Double Bon
File No.: 004
Random
code
File name: PLU
104
204
304
404
504
Max. allocatable records: see above
Max. allocatable records: see above
Max. allocatable records: see above
Max. allocatable records: see above
Max. allocatable records: see above
HALO
Order Counter
Stock
PLU (periodic/consolidation)
File name:
File name:
File name:
File name:
File name:
0
5
PLU (periodic 1)
PLU (periodic 2)
PLU (daily consolidation)
PLU (periodic 1 consolidation)
PLU (periodic 2 consolidation)
10
Counter Totalizer
15
20
Old
Red
Discount
amount
amount
totalizer
totalizer totalizer
File No.:
File No.:
File No.:
File No.:
File No.:
25
30
Stock
✍ Version 1.01
188
NINS
Department file
Department (daily)
Character
43
48
Program
53
Discount
Totalizer totalizer
23
58
File No.: 005
25
Link
28
31
34 35
@ HALO
Double Bon
16
Unit quantity
File name: Department (daily)
0
Max. allocatable records: 99
38
Order
43
Counter
63
Old
Red
amount amount
totalizer totalizer
Department (periodic/consolidation)
0
Department (periodic 1)
Department (periodic 2)
Department (daily consolidation)
Department (periodic 1 consolidation)
Department (periodic 2 consolidation)
5
10
15
20
Old
Discount
Counter Totalizer totalizer amount
totalizer
File No.:
File No.:
File No.:
File No.:
File No.:
105
205
305
405
505
Max. allocatable records: 99
Max. allocatable records: 99
Max. allocatable records: 99
Max. allocatable records: 99
Max. allocatable records: 99
File No.: 006
Max. allocatable records: 99
25
Red
amount
totalizer
Appendix (File record format)
File name:
File name:
File name:
File name:
File name:
Group file
Group (daily)
File name: Group (daily)
0
12
Character
17
Counter
22
Totalizer
✍ Version 1.01
TK-3200 Dealer's Manual
189
NINS
Appendix (File record format)
Group (periodic/consolidation)
File name:
File name:
File name:
File name:
File name:
0
Group (periodic 1)
Group (periodic 2)
Group (daily consolidation)
Group (periodic 1 consolidation)
Group (periodic 2 consolidation)
5
Counter
File No.:
File No.:
File No.:
File No.:
File No.:
106
206
306
406
506
Max. allocatable records: 99
Max. allocatable records: 99
Max. allocatable records: 99
Max. allocatable records: 99
Max. allocatable records: 99
File No.: 007
Max. allocatable records: 99
10
Totalizer
Clerk file
Clerk (programming)
File name: Clerk (programming)
15 16 18
Character
23
Program
27
Commission
rate
12
Clerk initial
check #
Drawer #
Clerk #
0
33
Check #
range
38
Mode/
operation
control
Clerk detail (daily, periodic/consolidation)
File name:
File name:
File name:
File name:
File name:
File name:
0
Clerk detail (daily)
Clerk detail (periodic 1)
Clerk detail (periodic 2)
Clerk detail (daily consolidation)
Clerk detail (periodic 1 consolidation)
Clerk detail (periodic 2 consolidation)
5
Counter
File No.:
File No.:
File No.:
File No.:
File No.:
File No.:
011
111
211
311
411
511
Max. allocatable records: 99 x 99
Max. allocatable records: 99 x 99
Max. allocatable records: 99 x 99
Max. allocatable records: 99 x 99
Max. allocatable records: 99 x 99
Max. allocatable records: 99 x 99
10
Totalizer
Clerk detail link (program)
File name: Clerk detail link
Max. allocatable records: 200
7 8 9
Record No/
Scanning
PLU code
Multi price flag
File No.
0
File No.: 030
✍ Version 1.01
190
NINS
Hourly sales file
Hourly sales (daily)
File name: Hourly sales (daily)
4
End time
2
Start time
0
9
14
No. of
customer
Gross
total
19
No. of
transaction
File No.: 009
Max. allocatable records: 99
File No.:
File No.:
File No.:
File No.:
File No.:
Max. allocatable records: 99
Max. allocatable records: 99
Max. allocatable records: 99
Max. allocatable records: 99
Max. allocatable records: 99
24
Net
total
Hourly sales (periodic/consolidation)
0
Hourly sales (periodic 1)
Hourly sales (periodic 2)
Hourly sales (daily consolidation)
Hourly sales (periodic 1 consolidation)
Hourly sales (periodic 2 consolidation)
5
No. of
customer
10
Gross
total
15
No. of
transaction
109
209
309
409
509
20
Net
total
Monthly sales file
Monthly sales (daily, periodic/consolidation)
File name:
File name:
File name:
File name:
File name:
File name:
0
5
Counter
(Gross)
Monthly sales (daily)
Monthly sales (periodic 1)
Monthly sales (periodic 2)
Monthly sales (daily consolidation)
Monthly sales (periodic 1 consolidation)
Monthly sales (periodic 2 consolidation)
10
Totalizer
(Gross)
15
File No.:010 Max. allocatable records: 31 (fixed)
File No.:110 Max. allocatable records: 31 (fixed)
File No.:210 Max. allocatable records: 31 (fixed)
File No.:310 Max. allocatable records: 31 (fixed)
File No.:410 Max. allocatable records: 31 (fixed)
File No.:510 Max. allocatable records: 31 (fixed)
20
Counter Totalizer
(Net)
(Net)
TK-3200 Dealer's Manual
191
NINS
Appendix (File record format)
File name:
File name:
File name:
File name:
File name:
Appendix (File record format)
Scanning PLU files
Scanning PLU file (daily)
File name: Scanning PLU
@
Mix & match link
35 37 39 40
Last update date
Link
32
Bottle link
Character
29
Unit quantity
PLU code
24 27
Program
7 8
Multi price flag
0
File No.:016 Max. allocatable records: 5000
43
48
Minimum
stock
Counter
53
Totalizer
58
Actual
stock
Non PLU table file (program)
File name: Non PLU table
0
File No.:040 Max. allocatable records: 100
8
Program
Batch maintenance PLU file (program)
File No.:070 Max. allocatable records: 1000
28
Character
30
Link
33
36 3839
@
Bottle link
Mix & match link
25
Program
PLU code
Multi price flag
Flag
7 8 9
Unit quantity
File name: Batch maintenance PLU
0
42
Minimum
stock
Direct maintenance PLU file (program)
192
NINS
Character
28
30
Link
33
36 3839
@
Bottle link
Mix & match link
PLU code
25
Program
7 8 9
Multi price flag
Flag
0
File No.:071 Max. allocatable records: 1000
Unit quantity
File name: Direct maintenance PLU
42
Minimum
stock
One touch NLU table file
File name: One touch NLU table
0
File No.:077 Max. allocatable records: 999
7
Scanning
PLU code
Mix & match table file
Mix & match table file (daily)
File name: Mix & match table (daily)
Character
15
@
18
23
Max. allocatable records: 99
28 30
Counter Totalizer
Work
12
Program
0
File No.: 051
File name:
File name:
File name:
File name:
File name:
0
5
Counter
Mix & match table (periodic 1)
Mix & match table (periodic 2)
Mix & match table (daily consolidation)
Mix & match table (periodic 1 consolidation)
Mix & match table (periodic 2 consolidation)
File No.: 151
File No.: 251
File No.: 351
File No.: 451
File No.: 551
Max. allocatable records: 99
Max. allocatable records: 99
Max. allocatable records: 99
Max. allocatable records: 99
Max. allocatable records: 99
File No.: 073
Max. allocatable records: 999
Appendix (File record format)
Mix & match table file (periodic/consolidation)
10
Totalizer
Bottle link table file
Bottle link table file (program)
File name: Bottle link table
File No.
3 4
Record No./random
PLU code
0
TK-3200 Dealer's Manual
193
NINS
Appendix (File record format)
Table analysis file
Table analysis (daily)
File name: Table analysis (daily)
12
15
Character
18
Maximum
check No.
Minimum
check No.
0
23
File No.: 018
Max. allocatable records: 99
File No.:
File No.:
File No.:
File No.:
File No.:
118
218
318
418
518
Max. allocatable records: 99
Max. allocatable records: 99
Max. allocatable records: 99
Max. allocatable records: 99
Max. allocatable records: 99
File No.: 019
Max. allocatable records: 99
File No.: 061
Max. allocatable records: 99
28
Counter Totalizer
(customer)
Table analysis (periodic/consolidation)
File name:
File name:
File name:
File name:
File name:
0
Table analysis (periodic 1)
Table analysis (periodic 2)
Table analysis (daily consolidation)
Table analysis (periodic 1 consolidation)
Table analysis (periodic 2 consolidation)
5
10
Counter Totalizer
(customer)
Time and attendance file
Time and attendance (daily)
File name: Time and attendance (daily)
Work time
Next rec-#
Employee rec-#
Clock-out time
8 10 12 14 16
Clock-out date
5
Clock-in time
3
Clock-in date
0
Employee file
File name: Employee
12
Character
194
NINS
17
Employee
number
0
Grand total file
Grand total (daily)
File name: Grand total (daily)
0
12
Character
File No.: 020
Max. allocatable records: 3 (fixed)
File No.: 320
Max. allocatable records: 3 (fixed)
20
Totalizer
Grand total (consolidation)
File name: Grand total (consolidation)
0
8
Totalizer
General control file
General control
File name: General control
Max. allocatable records: 37 (fixed)
5
Appendix (File record format)
0
File No.: 022
Program
Rec No.
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
Contents
Date order, Monetary mode
Password, Machine ID., Machine No.
Consecutive number
Clerk interrupt, Rounding, Tax system
Receipt control (1)
Calculation, Operation control
Menu shift control
Fixed totalizer report control (1)
Fixed totalizer report control (2)
Print control, Till timer
(future use)
(future use)
Communication control
Print control (currency exchange totalizers)
Report control (1)
Report control (2)
Report control (3), Money declaration
Slip/Guest/KP print
Order control
TK-3200 Dealer's Manual
Rec No.
020
021
022
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
Contents
(future use)
Message control
(future use)
(future use)
(future use)
Condiment
Check tracking
Clerk control
Euro (definition, exchange rate)
Euro (display, rounding)
Internal thermal printer control
Scanning PLU
Direct maintenance PLU
Batch PLU maintenance
(future use)
(future use)
Store/Recall range
Auto check range
195
NINS
Appendix (File record format)
Special character file
Special character
File name: Special character
0
File No.:
023
Max. allocatable records: 82 (fixed)
16
Character
See page nn of this manual for the detail of each record.
Report header file
Report header
File name: Report header
0
File No.: 024
Max. allocatable records: 27 (fixed)
12
Character
See page nn of this manual for the detail of each record.
Tax table file
Tax table
File name: Tax table
Max. allocatable records: 10
File No.: 028
Max. allocatable records: 999
7274
Actual value 60
Actual value 1
10 12 1415
Sum. of cyclic
patterns
No. of cyclic
patterns
Sum. of noncyclic patterns
Rounding
Cal. type
678
Max. table
amount
4
Rate
0
File No.: 025
Set menu table file
Set menu table
File name: Set menu table
File No. (15)
59 60
Rec No./
random code (15)
File No. (3)
1112
Rec No./
random code (3)
File No. (2)
78
Rec No./
random code (2)
File No. (1)
3 4
Rec No./
random code (1)
0
✍ Version 1.0.1
196
NINS
Batch X/Z file
Batch X/Z
File name: Batch X/Z
File No.: 029
Max. allocatable records: 10
File No.: 032
Max. allocatable records: 42
Mode
12 14 15 16 17 18 19 20 21 22 23 24
Character
X/Z code (1)
X/Z code (2)
X/Z code (3)
X/Z code (4)
X/Z code (5)
X/Z code (6)
X/Z code (7)
X/Z code (8)
X/Z code (9)
X/Z code (10)
0
Receipt message file
Receipt message
File name: Receipt message
0
24
Rec No.
1~4
5~8
9 ~ 12
13 ~ 16
17 ~ 20
21 ~ 24
25
26 ~ 29
30 ~ 39
40 ~ 42
Character
Message
Receipt logo message
Receipt commercial message
Receipt bottom message
Bill top message
Bill copy message
Bill bottom message
Post receipt message
Guest/slip intermediate message
Guest bottom message
Australian MOF message
Appendix (File record format)
Check endorsement message file
Check endorsement message
File name: Check endorsement message
0
File No.: 033
Max. allocatable records: 4
40
Character
Slip/local/remote printer message file
Slip/local/remote printer message
File name: Slip/local/remote printer message
0
Character
TK-3200 Dealer's Manual
File No.: 034
Max. allocatable records: 42
40
Rec No.
1~4
5~8
9 ~ 12
13 ~ 16
17 ~ 20
21 ~ 24
25
26 ~ 29
30 ~ 39
40 ~ 42
Message
Receipt logo message
Receipt/slip commercial message
Receipt/slip bottom message
Bill top message
Bill copy message
Bill bottom message
Post receipt message
Guest/slip intermediate message
Guest bottom message
Australian MOF message
197
NINS
Appendix (File record format)
Arrangement file
Arrangement file
File name: Arrangement
File No.: 038
Max. allocatable records: 9999
File No.: 039
Max. allocatable records: 999
Flag
Key code (1)
Key code (2)
Key code (3)
Key code (4)
Key code (5)
Key code (6)
Key code (7)
Key code (8)
Key code (9)
Key code (10)
0 1 2 3 4 5 6 7 8 9 10 11
Character recall file
Character recall
File name: Character recall
0
40
Character
Check print file
Check print
File name: Check print
File No.: 041
Max. allocatable records: 9
File No.: 062
Max. allocatable records: 99
3
Program
0
Scheduler file
Scheduler
File name: Scheduler
3
Type
0
198
NINS
10
Job
15
Date/
time
22
Work
System files
Character key table file
File name: Character key table
2
4
046
Max. allocatable records:
108
6
1st character
code
2nd character
code
3rd character
code
0
File No.:
Key/character key table record No.
JOURNAL
FEED
009 018
027 036
045 054 063 072
081
090 099
108
008 017
026 035
044 053 062 071
080
089 098
107
007 016
025 034
043 052 061 070
079
088 097
106
006 015
024 033
042 051 060 069
078
087 096
105
005 014
023 032
041 050 059 068
077
086 095
104
004 013
022 031
040 049 058 067
076
085 094
103
003 012
021 030
039 048 057 066
075
084 093
102
002 011
020 029
038 047 056 065
074
083 092
101
001 010
019 028
037 046 055 064
073
082 091
100
Appendix (File record format)
RECEIPT
FEED
Key table file
File name: Character key table
Max. allocatable records: 150
File No.
File No.
074
23 24
Record No./random
PLU code
File No.
File No.
19 20
Record No./random
PLU code
1516
Record No./random
PLU code
File No.
11 12
Record No./random
PLU code
File No.
7 8
Record No./random
PLU code
3 4
Record No./random
PLU code
0
File No.:
Key/key table record No.
RECEIPT
FEED
JOURNAL
FEED
035
030
021
042
039
034
029
020
041
038
033
028
019
040
037
032
027
C
036
031
7
8
4
051
060 069
078 087 096
105 114 123
132 141
150
050
059 070
077 086 095
104 113 122
131 140
149
049
058 067
076 085 094
103 112 121
130 139
148
018
048
057 066
075 084 093
102 111 120
129 138
147
026
017
047
056 065
074 083 092
101 110 119
128 137
146
9
025
016
046
055 064
073 082 091
100 109 118
127 136
145
5
6
024
015
045
054 063
072 081 090
099 108 117
126 135
144
1
2
3
044
053 062
071 080 089
098 107 116
125 134
143
014
023
043
052 061
070 079 088
097 106 115
124 133
142
0
011
012
013
022
No character can be programmed to shadowed keys.
TK-3200 Dealer's Manual
199
NINS
Appendix (File record format)
Terminal connection table file
File name: Terminal connection table
8
Max. allocatable records: 32
File No.: 093
Max. allocatable records: 7
File No.: 094
Max. allocatable records: 1 (fixed)
File No.: 095
Max. allocatable records: 1 (fixed)
12
Program
0
File No.: 091
Machine ID.
character
Printer connection table
File name: Printer definition table
Type
Main prt ID
Main printer
Backup prt ID
Backup printer
0 1 2 3 4 5
Operation start date file
File name: Operation start date
4
Operation
start date
0
Initialize code file
File name: Initialize code
0
7
Program
✍ Version 1.01
200
NINS
AT command file
File name: AT command
0
File No.: 096
Max. allocatable records: 2 (fixed)
62
Character
Online password file
File name: Online password
0
File No.: 097
Max. allocatable records: 1
8
Character
I/O parameter table file
File name: I/O parameter table
0
File No.: 098 Max. allocatable records: 3 (fixed)
4
System error log file
File name: System error log
Max. allocatable records: 99
File No.: 067
Max. allocatable records: 168 (fixed)
11
Time
9
Date
Source terminal
Target terminal
4 5 6
Job No.
2
Error code
0
File No.: 099
Graphic image files
Graphic logo file (for external printer)
File name: Graphic logo
0
48
Program
TK-3200 Dealer's Manual
201
NINS
Appendix (File record format)
Program
Appendix (File record format)
Guidance message files
Error message file
File name: Error message
0
File No.: 080 Max. allocatable records: 157(fixed)
16
Character
Rec-No.
Meaning
001
002
Mode switch position changed before finalization.
Clerk button pressed before finalization of a registration being performed under another clerk
button. The signed on clerk differs from the clerk performed the tracking check registration.
Initialization or unit lock clear operation in progress.
Memory allocation exceeds total memory capacity. (1/2)
Memory allocation exceeds total memory capacity. (2/2)
Registration without entering a clerk number.
Operation without entering the password.
The drawer is left open longer than the program time (drawer open alarm).
Attempt to register while the cash drawer is open.
Journal paper end. (1/2)
Journal paper end. (2/2)
Journal paper near end (option) (1/2)
Journal paper near end (option) (2/2)
Receipt paper end (1/2)
Receipt paper end (2/2)
Releasing paper jamming (1/5)
Releasing paper jamming (2/5)
Releasing paper jamming (3/5)
Releasing paper jamming (4/5)
Releasing paper jamming (5/5)
Two consecutive transactions attempted in the refund mode. (1/2)
Two consecutive transactions attempted in the refund mode. (2/2)
Attempt made to register an item without inputting a check number. (1/2)
Attempt made to register an item without inputting a check number. (2/2)
Attempt made to register an item without inputting a table number. (1/2)
Attempt made to register an item without inputting a table number. (2/2)
Finalize operation attempted without entering the number of customer. (1/2)
Finalize operation attempted without entering the number of customer. (2/2)
No department linked PLU is registered.
not used
Actual stock quantity becomes less than the minimum stock quantity.
Actual stock quantity becomes/is negative.
not used
not used
No condiment/preparation PLU is registered. (1/2)
No condiment/preparation PLU is registered. (2/2)
Item registration is prohibited, while partial tender. (1/2)
Item registration is prohibited, while partial tender. (2/2)
Finalization of a transaction attempted without registering rate-tax. (1/2)
Finalization of a transaction attempted without registering rate-tax. (2/2)
Finalization of a transaction attempted without confirming the subtotal.
Finalization of a transaction attempted without confirming the food stampsubtotal.
Finalize operation attempted without entering amount tender. (1/2)
Finalize operation attempted without entering amount tender. (2/2)
Change amount exceeds preset limit. (1/2)
Change amount exceeds preset limit. (2/2)
Contents of the drawer exceed programmed limit. (1/2)
Contents of the drawer exceed programmed limit. (2/2)
High amount lock out/low digit lock out error (1/2)
High amount lock out/low digit lock out error (2/2)
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
Default (English) message
WRONG MODE
WRONG OPERATOR
ERROR INIT/FC
INSUFFICIENT MEM
ORY
PLEASE SIGN ON
ENTER PASSWORD
CLOSE THE DRAWER
CLOSE THE DRAWER
JOURNAL PAPER
JOURNAL PAPER NE
AR END
RECEIPT PAPER EN
D
FOLLOW THE INSTR
UCTION LABEL ON
THE PRINTER
CHANGE BACK TO R
EG MODE
ENTER CHK/TBL NU
MBER
ENTER TABLE NUMB
ER
ENTER NUMBER OF
CUSTOMERS
NO DEPT LINK
STOCK SHORTAGE
NO STOCK
ENTER CONDIMENT/
PREPARATION PLU
IN THE TENDER OP
ERATION
PRESS RATE TAX K
EY
PRESS ST KEY
PRESS FSST KEY
ENTER TENDERED A
MOUNT
CHANGE AMOUNT EX
CEEDS LIMIT
REMOVE MONEY FRO
M THE DRAWER
DIGIT OR AMOUNT
LIMITATION OVER
✍ Version 1.01
202
NINS
EN
D
051
052
053
054
055
056
057
058
059
060
061
062
063
064
065
066
067
068
069
070
071
072
073
074
075
076
077
078
079
080
081
082
083
084
085
086
087
088
089
090
091
092
093
094
095
096
097
098
099
100
101
102
103
104
105
106
107
108
109
110
Meaning
Read/reset operation without declaring cash in drawer.
This error appears only when this function is activated. (1/2)
Same as above (2/2)
Attempt to register a new transaction without issuing a guest receipt. (1/2)
Attempt to register a new transaction without issuing a guest receipt. (2/2)
Attempt to register a new transaction without validation.
Validation paper (slip printer) has run out. (1/2)
Validation paper (slip printer) has run out. (2/2)
Attempt to register a new transaction without printing check.
Attempt to register a new transaction without printing check endorsement. (1/2)
Attempt to register a new transaction without printing check endorsement. (2/2)
Registration buffer full. Separate check buffer full.
Attempt to register a new transaction without printing slip.
No paper is inserted or paper is out in the slip printer. (1/2)
No paper is inserted or paper is out in the slip printer. (2/2)
Check tracking index memory full. (1/2)
Check tracking index memory full. (2/2)
Check tracking detail memory full. (1/2)
Check tracking detail memory full. (2/2)
Attempt to made use <New Check> to open a new check using a number that is already
used for an existing check in check tracking memory. (1/2)
Same as above (2/2)
Attempt to made use <Add Check>, <Separate Check> to open a check using a number
that is already opened. (1/2)
Same as above (2/2)
Attempt made to use <Old Check> reopen a new check using a number that is not used
for an existing check in check tracking memory. (1/2)
Same as above (2/2)
Check number range over (1/2)
Check number range over (2/2)
Normal registration is prohibited during separate check operation. (1/2)
Normal registration is prohibited during separate check operation. (2/2)
Store/auto new check range full
Attempt to finalize a transaction without specifying <EAT-IN> or <TAKE-OUT>. (1/2)
Attempt to finalize a transaction without specifying <EAT-IN> or <TAKE-OUT>. (2/2)
External printer offline
External printer went down.
External printer paper end (1/2)
External printer paper end (2/2)
External printer is now printing.
Printing buffer full (1/2)
Printing buffer full (2/2)
Attempt to print the last separated transaction on slip. (1/3)
Attempt to print the last separated transaction on slip. (2/3)
Attempt to print the last separated transaction on slip. (3/3)
The terminal connected with the target printer is busy/down. (1/2)
The terminal connected with the target printer is busy/down. (2/2)
The print buffer of the terminal connected with the target printer becomes/is full. (1/2)
The print buffer of the terminal connected with the target printer becomes/is full. (2/2)
Receipt/order print error (1/3)
Receipt/order print error (2/3)
Receipt/order print error (3/3)
Attempt to finalize a transaction when balance is less than or equal to zero. (1/3)
Attempt to finalize a transaction when balance is less than or equal to zero. (2/3)
Attempt to finalize a transaction when balance is less than or equal to zero. (3/3)
Data exists in the consolidation file. (1/2)
Data exists in the consolidation file. (2/2)
Scanning PLU direct maintenance/batch maintenance file becomes full. (1/3)
Scanning PLU direct maintenance/batch maintenance file becomes full. (2/3)
Scanning PLU direct maintenance/batch maintenance file becomes full. (3/3)
Entered scanning PLU code is illegal or not found. (1/3)
Entered scanning PLU code is illegal or not found. (2/3)
Entered scanning PLU code is illegal or not found. (3/3)
Scanning PLU/not found PLU file full
Default (English) message
PERFORM MONEY DE
CLARATION
ISSUE GUEST RECE
IPT
PRINT VALIDATION
INSERT VLD PAPER
AND RETRY
PRINT CHEQUE
PRINT CHECK ENDO
RSEMENT
REG BUFFER FULL
PRINT BILL
INSERT SLIP PAPE
R AND RETRY
CHECK MEMORY FUL
L
DETAIL MEMORY FU
LL
CHK/TBL No IS OC
CUPIED
CHK/TBL No IS BU
SY
CHK/TBL No IS NO
T OPENED
OUT OF CHK/TBL N
o RANGE
IN THE SEP CHK O
PERATION
CHK RANGE FULL
Appendix (File record format)
Rec-No.
PRESS EAT-IN OR
TAKE-OUT KEY
PRINTER OFFLINE
PRINTER ERROR
PRINTER PAPER EN
D
PRINTER BUSY
PRINT BUFFER FUL
L
PRINT FROM THE B
EGINNING OF THE
TRANSACTION
TARGET PRINT TER
MINAL BUSY/DOWN
TARGET TERMINAL
PRINT BF FULL
YOUR RECEIPT/ORD
ER MAY NOT BE IS
SUED
NEGATIVE BALANCE
CANNOT BE FINAL
IZED
DATA EXIST IN CO
NSOLIDATION FILE
PLU MAINTENANCE
FILE FULL. PRESS
<ST> TO EXIT
PLU CODE IS NOT
EXIST. INPUT PLU
CODE
PLU FILE FULL
✍ Version 1.01
TK-3200 Dealer's Manual
203
NINS
Appendix (File record format)
Rec-No.
Meaning
114
115
116
117
118
119
120
121
123
124
125
not used
not used
not used
not used
not used
not used
not used
not used
not used
not used
not used
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
not used
Attempt to register <-> or <CPN> when the balance becomes negative. (1/2)
Attempt to register <-> or <CPN> when the balance becomed negative. (2/2)
This sheet holder is prohibited by PGM.
Arrangement file is full. (1/2)
Arrangement file is full. (2/2)
Employee No. is not found. (1/3)
Employee No. is not found. (2/3)
Employee No. is not found. (3/3)
This employee is not clocking in. (1/2)
This employee is not clocking in. (2/2)
This employee No. is used on another terminal. (1/2)
This employee No. is used on another terminal. (2/2)
Time & attendance file becomes full. (1/2)
Time & attendance file becomes full. (2/2)
No CF card is set.
Flash memory format is illegal.
Can not read, because no designated file is in the CF card or internal flash memory.
Insufficient memory in the CF card or internal flash memory. (1/2)
Insufficient memory in the CF card or internal flash memory. (2/2)
Write protect switch of the CF card is on. (1/2)
Write protect switch of the CF card is on. (2/2)
Can not write, because designated file has already been in the CF card or internal flash memory. (1/2)
Sane as above (2/2)
Default (English) message
CLOSE THE JOURNA
L PLATEN ARM
CLOSE THE RECEIP
T PLATEN ARM
PAPER JAMMED. OP
EN RECEIPT PLATE
N ARM & REMOVE P
APER
NEGATIVE BALANCE
IS NOT ALLOWED
WRONG MENU
ARRANGEMENT FILE
FULL
EMPLOYEE No IS N
OT FOUND IN THE
EMPLOYEE FILE
EMPLOYEE No IS N
OT CLOCKING-IN
EMPLOYEE No IS O
CCUPIED
TIME&ATTENDANCE
FILE FULL
INSERT CF CARD
ILLEGAL FORMAT
FILE NOT FOUND
INSUFFICIENT MEM
ORY
CHECK THE WRITE
PROTECT SWITCH
FILE ALREADY EXI
ST
✍ Version 1.01
204
NINS
Appendix (File record format)
✍ Version 1.01
TK-3200 Dealer's Manual
205
NINS
Appendix (File record format)
Miscellaneous message file
File name: Miscellaneous message
0
File No.: 078 Max. allocatable records: 58 (fixed)
16
Character
Rec-No.
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
Meaning
Register total working time message
Register start date message
RAM message in PGM5
bytes message in PGM5
FILE message in PGM5
ROM version message
ROM label name message
IPL message while initial program loading
INIT message while initializing
FC message while flag clear
Error End message after completion of communication
Normal End message after completion of communication
not used
Separator of date symbol
Day of a week (monday)
Day of a week (tuesday)
Day of a week (wednesday)
Day of a week (thursday)
Day of a week (friday)
Day of a week (saturday)
Day of a week (sunday)
Communicating message
Program downloading/uploading message
Flash memory message
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
042
042
043
044
045
046
047
048
049
050
051
052
053
054
055
056
057
058
Online COM1 port message
Job No. message
REG1 mode message in arrangement program
REG2 mode message in arrangement program
RF mode message in arrangement program
not used
X1 mode message in arrangement program
Z1 mode message in arrangement program
X2/Z2 mode message in arrangement program
Receipt on/off message in arrangement program
Menu sheet 1st page message in arrangement program
Menu sheet 2nd page message in arrangement program
Designation of sub currency to the Euro message
Designation of sub currency to the local money message
Daily read report message
Daily reset report message
Periodic 1 read report message
Periodic 1 reset report message
Periodic 2 read report message
Periodic 2 reset report message
Daily consolidation read report message
Daily consolidation reset report message
Periodic 1 consolidation read report message
Periodic 1 consolidation reset report message
Periodic 2 consolidation read report message
Periodic 2 consolidation reset report message
Model name (do NOT change)
Taxable amount 1 descriptor for Australian GST
Tax amount 1 descriptor for Australian GST
Main currency monetary symbol for Australian GST
Taxable 1 symbol for Australian GST
Subtotal key descriptor (display) for Australian GST
Delete file in the CF card.
206
NINS
Default (English) message
G
S
R
b
F
V
L
I
I
F
E
N
T
T
A
y
I
E
A
P
N
C
r
o
(
(
(
(
(
(
(
A
F
I
C
J
R
R
R
M
T
W
T
F
S
S
U
L
N
O
O
E
E
F
X
Z
X
R
M
M
E
L
X
Z
X
Z
X
Z
C
C
C
C
C
C
1
1
2
C
E
E
U
O
X
Z
X
Z
X
Z
X
Z
X
Z
A
M
t
L
R
B
L
I
T I M E
R T
D A T E
e s
E
.
:
E L :
T . :
:
r o r
E n d
r m a l
E n d
O
U
E
H
R
A
U
T
A
L
M
B
G
G
N
E
D
U
I
T
N
O
S
I
1
)
)
)
)
)
)
)
- - - - - - - - - - - P G M
H
N E
/
T
N
N
R
C
Z 2
O
U U O
A L
N o .
1
2
N / O F F
1
2
m o n e y
m o n e y
1
1
2
2
X
Z
X
Z
1
1
2
2
T A X A B L E
A M T
G S T
I N C L U D E D
$
*
R N D / S T
D E L E T E
Printing guidance message file
File name: Printing guidance message
0
File No.: 079 Max. allocatable records: 87(fixed)
24
Character
001-4
005
006
006
008
009-15
016
017
018-21
022
023
024-25
026
027
028-31
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
051
052
053
054
055
056
057
058
059
060
061
062
063
064
065
066
067
068
069
070
071
072
Meaning
not used
Direct maintenance result: success
Direct maintenance result: failure
Batch maintenance result: success
Batch maintenance result: failure
not used
Flash memory format result: success
Flash memory format result: failure
not used
PLU file reset result: success
PLU file reset result: failure
not used
Initialize AT command message
MODEM set message
not used
PLU reset result: success
PLU reset result: failure
Euro currency system setup message 1-1
Euro currency system setup message 1-2
Euro currency system setup message 1-3
Euro currency system setup message 1-4
Euro currency system setup message 1-5
Euro currency system setup message 1-6
Euro currency system setup message 1-7
Euro currency system setup message 1-8
Euro currency system setup message 2-1
Euro currency system setup message 2-2
Euro currency system setup message 2-3
Euro currency system setup message 2-4
Euro currency system setup message 2-5
Euro currency system setup message 2-6
Euro currency system setup message 2-7
Euro currency system setup message 2-8
Euro currency system setup message 2-9
Euro currency system setup message 2-10
Euro currency system setup message 2-11
Euro currency system setup message 2-12
Euro currency system setup message 2-13
Euro currency system setup message 3-1
Euro currency system setup message 3-2
Euro currency system setup message 3-3
Euro currency system setup message 3-4
Euro currency system setup message 4-1
Euro currency system setup message 4-2
Euro currency system setup message 4-3
Euro currency system setup message 4-4
Euro currency system setup message 6-1
Euro currency system setup message 6-2
Euro currency system setup message 6-3
Euro currency system setup message 6-4
Euro currency system setup message 6-5
Euro currency system setup message 6-6
Australian GST setup message
Euro currency system setup message 5-1
Euro currency system setup message 5-2
Euro currency system setup message 5-3
Default (English) message
D
D
B
B
i
i
a
a
r
r
t
t
e
e
c
c
ct M
ct M
h Ma
h Ma
a
a
i
i
i
i
n
n
n
n
t
t
te
te
e
e
N
E
N
E
o
r
o
r
r
r
r
r
m
o
m
o
a l End
r E nd
a l End
r E nd
Format
Format
Norma l End
Error E nd
PLU
PLU
Norma l End
Error E nd
Reset
Reset
AT comman d
Modem set
P
P
E
c
*
T
a
*
O
C
L
L
U
o
*
h
l
*
K
A
1
2
3
E
a
C
E
a
e
C
E
c
k
C
E
c
1
D
A
s
G
A
c
O
4
n
n
A
n
n
x
A
n
u
e
A
U
h
r
l
e
S
u
h
K
U
U
R
n
*
i
l
*
Z
Z
O c
fig
***
s o
to
***
NCE
.Ma
Su
Ch
.Ma
Su
Ch
.Ma
Su
Ch
.EU
ter
d p
NCE
ter
d p
) 1
NCE
ter
rre
y.
NCE
RO
ang
EUR
awe
l t
t.
T s
tom
ang
:0<
L
i
b
a
i
b
a
i
b
a
R
c
c
u
u
*
p
t
*
:
:
n
l
l
r
r
e
a
*
<
<
e
e
r
a
W
r
l
*
C
S
nge
n
nge
n
n
n
O
c
e
:
E
e
E
:
d
c
L
c
e
O
r
o
:<S
urr
d.
=
No
tal
r
L
r
L
ge
o
on
ss
<S
UR
ss
UR
<S
ra
y
a
a
e
t
A
a
i
*
A
T
:
:
:
:
:
:
:
:
:
n
f
r
r
n
i
R
t
z
*
>
>
L
E
L
L
E
E
E
L
E
l
i
<
T>
O
<
O
T>
we
an
initiali ze
c
o
N
i
e
*
y
n
I
o
r
*
N
E
s
s
NG
n
s.
**
O
U
O
O
U
U
U
O
U
y
g
C
C
R
C
C
R
R
R
C
R
A
O
A
A
O
O
O
A
O
o
r
y
e
r
r
s
t
*
re
m
o
t
t
*
s
a
r
e
i
*
e
l
End
E nd
m
ng
** ***
ts
**** ** ***
L
L
L
L
uration
A> key.
N o.
exchange r ate
CA> key.
= ?.???? ?
r
d
No. of s ub
press <C A>
T>
ency
.=
izers
yste m was
atic UNIT
e to EURO
CA>
syste m
were
was
r e-
chan ge d.
PRIC Es
mone y.
✍ Version 1.01
TK-3200 Dealer's Manual
207
NINS
Appendix (File record format)
Rec-No.
Appendix (File record format)
Rec-No.
073
074
075
076
077
078
079 -083
084
085
086
087
Meaning
Euro currency system setup message 5-4
Euro currency system setup message 5-5
Euro currency system setup message 6-7
Euro currency system setup message 6-8
Euro currency system setup message 7-1
Euro currency system setup message 7-2
not used
Clock-in message
Clock-out message
CF card data save: success
CF card data save: failure
Default (English) message
N
C
U
t
U
c
O
A
N
o
N
h
:1<C
NCEL
IT P
EUR
IT P
ange
C
C
C
C
LOCKLOCKF CAR
F CAR
A
:
R
O
R
d
>
<S T>
IC Es were
.
IC Es were
t o EURO.
IN
OUT
D
D
NINS
no t
Norma l End
Error E nd
✍ Version 1.01
208
ch an ged
X/Z guidance message file
File name: X/Z guidance message
0
File No.: 082 Max. allocatable records: 72(fixed)
16
Character
Meaning
PLU range report message 1st line
Input start No. message 1st line
Input start No. message 2nd line
Input end No. message 1st line
Input end No. message 2nd line
PLU stock range report message 1st line
Input start No. message 1st line
Input start No. message 2nd line
Input end No. message 1st line (quote from rec-004)
Input end No. message 2nd line (quote from rec-005)
PLU individual group report message 1st line
Input target No. message 1st line
Input target No. message 2nd line
PLU individual department report message 1st line
Input target No. message 1st line
Input target No. message 2nd line
Group stock report message 1st line
Input target No. message 1st line
Input target No. message 2nd line
Department stock report message 1st line
Input target No. message 1st line
Input target No. message 2nd line
Individual clerk report message 1st line
Input target No. message 1st line
Input target No. message 2nd line
Scanning PLU by group report message 1st line
Input start No. message 1st line
Input start No. message 2nd line
Input end No. message 1st line (quote from rec-004)
Input end No. message 2nd line (quote from rec-005)
Scanning PLU by department report message 1st line
Input start No. message 1st line
Input start No. message 2nd line
Input end No. message 1st line (quote from rec-004)
Input end No. message 2nd line (quote from rec-005)
PLU best report message 1st line
Input start No. message 1st line
Input start No. message 2nd line
Input end No. message 1st line (quote from rec-004)
Input end No. message 2nd line (quote from rec-005)
PLU inactive report message 1st line
Input start No. message 1st line
Input start No. message 2nd line
Input end No. message 1st line (quote from rec-004)
Input end No. message 2nd line (quote from rec-005)
Scanning PLU reset message 1st line
Execution message
Cancellation message
Default (English) message
*PLU BY RANGE*
INPUT START No A
ND PRESS <CA>
INPUT END No AND
PRESS <CA>
*STOCK BY RANGE*
INPUT START No A
ND PRESS <CA>
INPUT END No AND
PRESS <CA>
*PLU BY GROUP*
INPUT No AND PRE
SS <CA>
*PLU BY DEPT*
INPUT No AND PRE
SS <CA>
*STOCK BY GROUP*
INPUT No AND PRE
SS <CA>
*STOCK BY DEPT*
Appendix (File record format)
Rec-No.
001
002
003
004
005
006
007
008
----009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
----027
028
029
----030
031
032
----033
034
035
----036
037
038
INPUT No AND PRE
SS <CA>
*INDIVIDUAL CLK*
INPUT No AND PRE
SS <CA>
*SCAN PLU BY GP*
INPUT START No A
ND PRESS <CA>
INPUT END No AND
PRESS <CA>
SCAN PLU BY DEPT
INPUT START No A
ND PRESS <CA>
INPUT END No AND
PRESS <CA>
PLU BEST BY DEPT
INPUT START No A
ND PRESS <CA>
INPUT END No AND
PRESS <CA>
*PLU NON ACTIVE*
INPUT START No A
ND PRESS <CA>
INPUT END No AND
PRESS <CA>
SCAN PLU Z CLEAR
START YES=<CA>
NO=<ST>
✍ Version 1.01
TK-3200 Dealer's Manual
209
NINS
Appendix (File record format)
Rec-No.
039
040
041
----042
043
044
----045
046
047
048
049
050
051
052
053
054
Meaning
Scanning PLU stock by group report message 1st line
Input start No. message 1st line
Input start No. message 2nd line
Input end No. message 1st line (quote from rec-004)
Input end No. message 2nd line (quote from rec-005)
Scanning PLU stock by department message 1st line
Input start No. message 1st line
Input start No. message 2nd line
Input end No. message 1st line (quote from rec-004)
Input end No. message 2nd line (quote from rec-005)
Scanning PLU stock Z clear message 1st line
Execution message
Cancellation message
PLU stock maintenance (addition) message 1st line
PLU stock maintenance (addition) message 2nd line
PLU stock maintenance (input new stock) message 1st line
PLU stock maintenance (input new stock) message 2nd line
PLU stock Z clear message 1st line
Execution message
Cancellation message
Default (English) message
*SCAN STKBY GP*
INPUT START No A
ND PRESS <CA>
INPUT END No AND
PRESS <CA>
SCAN STK BY DEPT
INPUT START No A
ND PRESS <CA>
INPUT END No AND
PRESS <CA>
SCAN STK Z CLEAR
START YES=<CA>
NO=<ST>
*PLU STOCK*
ADD STOCK QTY
*PLU STOCK*
INPUT NEW QTY
*PLU Z CLEAR*
START YES=<CA>
NO=<ST>
056
057
058
059
Input target machine No. message 1st line
Input target machine No. message 2nd line
Input report code message 1st line
Input report code message 2nd line
INPUT TERM No AN
064
065
Execution message
Input start No. message 2nd line
START YES=<CA>
070
071
072
Busy reset message 1st line
Busy reset message 2nd line
Busy reset message 3rd line
*BUSY RESET*
D PRESS <ST>
INPUT REPORT COD
E AND PRESS <CA>
NO=<ST>
INPUT CHK/TBL No
AND PRESS <CA>
✍ Version 1.01
210
NINS
Program guidance message file
0
File name: Program guidance message
16
File No.: 083 Max. allocatable records: 115(fixed)
Character
Meaning
Range program message 1st line
Input start No. message 1st line
Input start No. message 2nd line
Input end No. message 1st line
Input end No. message 2nd line
Input program data message 1st line
Input program data message 2nd line
PLU direct maintenance message 1st line
Input PLU code message
Input unit price/quantity message
Input link department message
One touch NLU program message 1st line
Input PLU code message
Press <NLU> key
PLU direct maintenance message 1st line
Input action code message
not used
Input PLU code
Input unit price/quantity message
Input link department message
Input descriptor message
Input status message
Input bottle link message
Input mix & match link message
Input minimum stock message
Batch maintenance activation message 1st line
Execution message
Cancellation message
Batch maintenance programming message 1st line
Input batch maintenance record No. message
Input action code message 1st line
Input action code message 2nd line
Input PLU code (quote from rec-018)
Input unit price/quantity message (quote from rec-019)
Input link department message (quote from rec-020)
Input descriptor message (quote from rec-021)
Input status message (quote from rec-022)
Input bottle link message (quote from rec-023)
Input mix & match link message (quote from rec-024)
Input minimum stock message (quote from rec-025)
Tax table programming message 1st line
Input tax rate message 1st line
Input tax rate message 2nd line
Input tax table maximum message 1st line
Input tax table maximum message 2nd line
Input tax table maximum message 3rd line
Input rounding/calculation type message 1st line
Input rounding/calculation type message 2nd line
Input rounding/calculation type message 3rd line
Input sum of cyclic patterns message 1st line
Input sum of cyclic patterns message 2nd line
Input sum of cyclic patterns message 3rd line
Input No. of cyclic patterns message 1st line
Input No. of cyclic patterns message 2nd line
Input No. of cyclic patterns message 3rd line
Default (English) message
*RANGE PGM*
INPUT START No A
ND PRESS <CA>
INPUT END No AND
PRESS <CA>
INPUT PGM DATA A
ND PRESS <CA>
*DIRECT MAINTE*
PLU CODE ?
UNIT QTY&PRICE ?
DEPT LINKAGE ?
*ONE TOUCH NLU*
PLU CODE ?
PRESS <NLU> KEY
*DIRECT MAINTE*
ADD=O MODIFY=1
PLU CODE ?
UNIT QTY&PRICE ?
DEPT LINKAGE ?
PLU DESCRIPTOR ?
PLU STATUS ?
BOTTLE LINK ?
MIX&MATCH LINK ?
MINIMUM STOCK ?
*BATCH MAINTE*
START YES=<CA>
NO=<ST>
*BATCH MAINTE*
REC No ?
ADD=0 MODIFY=1
DELETE=2
PLU CODE ?
UNIT QTY&PRICE ?
DEPT LINKAGE ?
PLU DESCRIPTOR ?
PLU STATUS ?
BOTTLE LINK ?
MIX&MATCH LINK ?
MINIMUM STOCK ?
*TAX TABLE*
INPUT TAX RATE A
ND PRESS <CA>
INPUT MAXIMUM TA
BLE AMOUNT AND P
RESS <CA>
INPUT ROUNDING,
CAL TYPE AND PRE
SS <CA>
INPUT SUM OF CYC
LIC PATTERNS AND
PRESS <CA>
INPUT No OF CYCL
IC VALUES AND PR
ESS <CA>
Appendix (File record format)
Rec-No.
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
----------------033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
✍ Version 1.01
TK-3200 Dealer's Manual
211
NINS
Appendix (File record format)
Rec-No.
048
049
050
051
052
053
054
055
056
057
058
059
060
061
062
063
064
065
066
----067
068
069
070
071
072
073
074
075
076
077
078
079
080
081
082
083
084
085
086
087
088
089
090
091
092
093
094
095
096
097
098
099
100
101
102
103
104
105
106
107
Meaning
Input sum of non-cyclic values message 1st line
Input sum of non-cyclic values message 2nd line
Input sum of non-cyclic values message 3rd line
Input actual values message 1st line
Input actual values message 2nd line
Input actual values message 3rd line
Mix & match programming message 1st line
Input discount amount message 1st line
Input discount amount message 2nd line
Input discount amount message 3rd line
Input status message 1st line
Input status message 2nd line
Memory allocation programming message 1st line
Input No. of records of file message 1st line
Input No. of records of file message 2nd line
Input No. of records of file message 3rd line
Program reading by range message 1st line
Input start No. message 1st line
Input start No. message 2nd line
Input end No. message 1st line (quote from rec-004)
Input end No. message 2nd line (quote from rec-005)
Please wait message
CF card formatting message 1st line
Execution message
Cancellation message
Auto-program (register to CF card) message 1st line
Input command code message 1st line
Input command code message 2nd line
Auto-program (register to COM port) message 1st line
Input command code message 1st line
Input command code message 2nd line
Send IPL data to CF card message 1st line
Input command code message 1st line
Input command code message 2nd line
Send IPL data to COM port message 1st line
Input command code message 1st line
Input command code message 2nd line
Set AT command to MODEM message 1st line
Execution message
Cancellation message
Arrangement table program message
Setting the graphic logo to the external printer message
Execution message
Cancellation message
Error message 1st line of an attempt of adding an existing item in the PLU file
Error message 2nd line of an attempt of adding an existing item in the PLU file
Error message 1st line of an attempt of adding an existing item in the batch maintenance file
Error message 2nd line of an attempt of adding an existing item in the batch maintenance file
Error message 3rd line of an attempt of adding an existing item in the batch maintenance file
Direct Maintenance
Field number inputting for partial maintenance
Batch Maintenance
Field number inputting for partial maintenance
Restore from CF activation 1st line
Restore from CF activation 2nd line
Restore from CF activation 3rd line
Delete file from CF activation 1st line
Delete file from CF activation 2nd line
Delete file from CF activation 3rd line
Save to CF activation 1st line
Save to CF activation 2nd line
Save to CF activation 3rd line
Default (English) message
INPUT SUM OF NON
-CYCLIC VALUES A
ND PRESS <CA>
INPUT ACTUAL VAL
UES AND PRESS <C
A>
MIX&MATCH TABLE
INPUT DISCOUNT A
MOUNT AND PRESS
<CA>
INPUT STATUS AND
PRESS <CA>
*MEMORY ALLOC*
INPUT No OF RECO
RDS AND PRESS <C
A>
*PGM READ*
INPUT START No A
ND PRESS <CA>
INPUT END No AND
PRESS <CA>
PLEASE WAIT
*CF FORMAT*
START YES=<CA>
NO=<ST>
*SAVE TO CF*
INPUT OPE CODE A
ND PRESS <CA>
*COM AUTO PGM*
INPUT OPE CODE A
ND PRESS <CA>
*IPL TO CF*
INPUT OPE CODE A
ND PRESS <CA>
IPL TO COM PORT
INPUT OPE CODE A
ND PRESS <CA>
*MODEM SET*
START YES=<CA>
NO=<ST>
ARRANGE No ?
*LOGO IMAGE SET*
START YES=<CA>
NO=<ST>
ITEM EXISTS IN T
HE PLU FILE
PLU IS OCCUPIED
MODIFY=<CA> SKI
P=<ST>
*DIRECT MAINTE*
INPUT FIELD No
*BATCH MAINTE*
INPUT FIELD No
*RESTORE CF*
SELECT FILE NAME
AND PRESS <CA>
*DELETE CF*
SELECT FILE NAME
AND PRESS <CA>
*SAVE TO CF*
START YES=<CA>
NO=<ST>
✍ Version 1.01
212
NINS
Appendix (File record format)
✍ Version 1.01
TK-3200 Dealer's Manual
213
NINS
Appendix (File record format)
Registration guidance message file
File name: Registration guidance message
0
File No.: 081 Max. allocatable records: 22(fixed)
16
Character
Rec-No.
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
Meaning
Guidance message of registering not found PLU 1st line
Guidance message of registering not found PLU 2nd line
Guidance message of registering not found PLU 3rd line
Guidance message of registering not found PLU 4th line
Guidance message of backup printing of order 1st line
Guidance message of backup printing of order 2nd line
Guidance message of backup printing of order 3rd line
Guidance message of scanning PLU price input compulsory 1st line
Guidance message of scanning PLU price input compulsory 2nd line
Guidance message of scanning PLU price input compulsory 3rd line
Guidance message of scanning PLU price input compulsory 4th line
Guidance message of registering employee 1st line
Guidance message of registering employee 1st line
Guidance message of registering employee 3rd line
Guidance message of registering employee 4th line
Guidance message of clock-in operation 1st line
Guidance message of clock-in operation 2nd line
Guidance message of clock-out operation 1st line
Guidance message of clock-out operation 2nd line (quote from rec-017)
Scanning PLU searching message
Default (English) message
*NOT FOUND PLU*
INPUT UNIT PRICE
,AND PRESS DEPT
KEY
*BACKUP PRINT*
<CA>=BACKUP <ST>
=RETRY
*PRICE ENTRY*
INPUT UNIT PRICE
,AND PRESS <PRC>
KEY
TIME&ATTENDANCE
INPUT EMPLOYEE N
o AND PRESS <CL
OCK-IN/OUT>
*CLOCK-IN OK?*
YES=<CA> NO=<ST>
*CLOCK-OUT OK?*
YES=<CA> NO=<ST>
SEARCHING
✍ Version 1.01
214
NINS
Help message file
File name: Help message
0
File No.: 085 Max. allocatable records: 199 (fixed)
24
Character
Note: It is necessary to allocate this file, if you want to make your original help.
Meaning
Header message of help receipt (1/19)
Header message of help receipt (2/19)
Header message of help receipt (3/19)
Header message of help receipt (4/19)
Header message of help receipt (5/19)
Header message of help receipt (6/19)
Header message of help receipt (7/19)
Header message of help receipt (8/19)
Header message of help receipt (9/19)
Header message of help receipt (10/19)
Header message of help receipt (11/19)
Header message of help receipt (12/19)
Header message of help receipt (13/19)
Header message of help receipt (14/19)
Header message of help receipt (15/19)
Header message of help receipt (16/19)
Header message of help receipt (17/19)
Header message of help receipt (18/19)
Header message of help receipt (19/19)
First help item message (1/17)
First help item message (2/17)
First help item message (3/17)
First help item message (4/17)
First help item message (5/17)
First help item message (6/17)
First help item message (7/17)
First help item message (8/17)
First help item message (9/17)
First help item message (10/17)
First help item message (11/17)
First help item message (12/17)
First help item message (13/17)
First help item message (14/17)
First help item message (15/17)
First help item message (16/17)
First help item message (17/17)
Second help item message (1/53)
Second help item message (2/53)
Second help item message (3/53)
Second help item message (4/53)
Second help item message (5/53)
Second help item message (6/53)
Second help item message (7/53)
Second help item message (8/53)
Second help item message (9/53)
Second help item message (10/53)
Second help item message (11/53)
Second help item message (12/53)
Second help item message (13/53)
TK-3200 Dealer's Manual
Default (English) message
ENTER NUMBER THEN
PRESS <HELP> KEY.
01:HOW TO PROGRAM
DATE AND TIME?
02:UNIT PRICE FOR
DEPARTMENTS AND PLUS
03:HOW TO PROGRAM
TAX TABLE?
04:HOW TO REPLACE
PAPER ROLL?
05:HOW TO TAKE REPORTS?
Appendix (File record format)
Rec-No.
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
01:HOW TO PROGRAM
DATE AND TIME?
1)TURN MODE KEY TO PGM.
2)ENTER HHMM
PRESS <X> KEY.
3)PRESS <C> KEY.
4)ENTER YYMMDD
PRESS <X> KEY.
5)PRESS <C> KEY.
02:UNIT PRICE FOR
DEPARTMENTS AND PLUS
A)SET UP UNIT PRICES FOR
DEPARTMENTS
<DEPT> MEANS DEPARTMENT
KEY.
1)TURN MODE KEY TO PGM.
2)ENTER xxxxxx
THEN PRESS <DEPT>.
215
NINS
Appendix (File record format)
Rec-No.
050
051
052
053
054
055
056
057
058
059
060
061
062
063
064
065
066
067
068
069
070
071
072
073
074
075
076
077
078
079
080
081
082
083
084
085
086
087
088
089
090
091
092
093
094
095
096
097
098
099
100
101
102
103
104
105
106
107
108
109
110
216
NINS
Meaning
Second help item message (14/53)
Second help item message (15/53)
Second help item message (16/53)
Second help item message (17/53)
Second help item message (18/53)
Second help item message (19/53)
Second help item message (20/53)
Second help item message (21/53)
Second help item message (22/53)
Second help item message (23/53)
Second help item message (24/53)
Second help item message (25/53)
Second help item message (26/53)
Second help item message (27/53)
Second help item message (28/53)
Second help item message (29/53)
Second help item message (30/53)
Second help item message (31/53)
Second help item message (32/53)
Second help item message (33/53)
Second help item message (34/53)
Second help item message (35/53)
Second help item message (36/53)
Second help item message (37/53)
Second help item message (38/53)
Second help item message (39/53)
Second help item message (40/53)
Second help item message (41/53)
Second help item message (42/53)
Second help item message (43/53)
Second help item message (44/53)
Second help item message (45/53)
Second help item message (46/53)
Second help item message (47/53)
Second help item message (48/53)
Second help item message (49/53)
Second help item message (50/53)
Second help item message (51/53)
Second help item message (52/53)
Second help item message (53/53)
Third help item message (1/26)
Third help item message (2/26)
Third help item message (3/26)
Third help item message (4/26)
Third help item message (5/26)
Third help item message (6/26)
Third help item message (7/26)
Third help item message (8/26)
Third help item message (9/26)
Third help item message (10/26)
Third help item message (11/26)
Third help item message (12/26)
Third help item message (13/26)
Third help item message (14/26)
Third help item message (15/26)
Third help item message (16/26)
Third help item message (17/26)
Third help item message (18/26)
Third help item message (19/26)
Third help item message (20/26)
Third help item message (21/26)
Default (English) message
3)REPEAT 2).
4)PRESS <SUBTOTAL>.
B)SET UP UNIT PRICES FOR
PLUS
1)TURN MODE KEY TO PGM.
2)ENTER nnnn
THEN PRESS <PLU>.
nnnn=PLU No.
3)ENTER xxxxxx
PRESS <CASH>.
4)REPEAT 2),3)
5)PRESS <SUBTOTAL>.
xxxxxx IS AN UNIT PRICE
YOU WANT TO SET UP.
AN UNIT PRICE MUST BE
WITHIN THE RANGE OF
0.01-9999.99
03:HOW TO PROGRAM
TAX TABLE?
1)TURN MODE KEY TO PGM
2)ENTER 3 THEN PRESS
<SUBTOTAL> KEY.
3)ENTER 0125 THEN PRESS
<SUBTOTAL> KEY.
4)XX.XXXX <CASH> KEY
5)0 <CASH> KEY
6)YYZZ <CASH> KEY
7)PRESS <SUBTOTAL> KEY.
XX.XXXX=RATE
YY=00(CUT OFF)
Meaning
Third help item message (22/26)
Third help item message (23/26)
Third help item message (24/26)
Third help item message (25/26)
Third help item message (26/26)
Fourth help item message (1/20)
Fourth help item message (2/20)
Fourth help item message (3/20)
Fourth help item message (4/20)
Fourth help item message (5/20)
Fourth help item message (6/20)
Fourth help item message (7/20)
Fourth help item message (8/20)
Fourth help item message (9/20)
Fourth help item message (10/20)
Fourth help item message (11/20)
Fourth help item message (12/20)
Fourth help item message (13/20)
Fourth help item message (14/20)
Fourth help item message (15/20)
Fourth help item message (16/20)
Fourth help item message (17/20)
Fourth help item message (18/20)
Fourth help item message (19/20)
Fourth help item message (20/20)
Fifth help item message (1/64)
Fifth help item message (2/64)
Fifth help item message (3/64)
Fifth help item message (4/64)
Fifth help item message (5/64)
Fifth help item message (6/64)
Fifth help item message (7/64)
Fifth help item message (8/64)
Fifth help item message (9/64)
Fifth help item message (10/64)
Fifth help item message (11/64)
Fifth help item message (12/64)
Fifth help item message (13/64)
Fifth help item message (14/64)
Fifth help item message (15/64)
Fifth help item message (16/64)
Fifth help item message (17/64)
Fifth help item message (18/64)
Fifth help item message (19/64)
Fifth help item message (20/64)
Fifth help item message (21/64)
Fifth help item message (22/64)
Fifth help item message (23/64)
Fifth help item message (24/64)
Fifth help item message (25/64)
Fifth help item message (26/64)
Fifth help item message (27/64)
Fifth help item message (28/64)
Fifth help item message (29/64)
Fifth help item message (30/64)
Fifth help item message (31/64)
Fifth help item message (32/64)
Fifth help item message (33/64)
Fifth help item message (34/64)
Fifth help item message (35/64)
Fifth help item message (36/64)
TK-3200 Dealer's Manual
Default (English) message
YY=50(ROUND OFF)
YY=90(ROUND UP)
ZZ=02(ADD-ON)
ZZ=03(VAT)
04:HOW TO REPLACE
PAPER ROLL?
1)TAKE PRINTER COVER OUT
2)PULL UP PLATEN ARM.
3)LOAD PAPER ROLL FROM
BOTTOM UP.
4)PULL DOWN PLATEN ARM.
5)REPLACE PRINTER COVER.
05:HOW TO TAKE REPORTS?
YOU CAN TAKE THE
FOLLOWING REPORTS.
1)DAILY X REPORT
PRESS <CASH> KEY @X MODE
Appendix (File record format)
Rec-No.
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
2)DAILY Z REPORT
PRESS <CASH> KEY @Z MODE
3)PERIODIC1 X REPORT
100 <CASH> KEY @ X2/Z2
MODE
4)PERIODIC1 Z REPORT
1100 <CASH> KEY @ X2/Z2
MODE
5)PERIODIC2 X REPORT
200 <CASH> KEY @ X2/Z2
MODE
6)PERIODIC2 Z REPORT
1200 <CASH> KEY @ X2/Z2
MODE
7)PLU X REPORT
14 <CASH> KEY @ X MODE
8)PLU Z REPORT
14 <CASH> KEY @ Z MODE
9)HOURLY X REPORT
19 <CASH> KEY @ X MODE
217
NINS
Appendix (File record format)
Rec-No.
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
218
NINS
Meaning
Fifth help item message (37/64)
Fifth help item message (38/64)
Fifth help item message (39/64)
Fifth help item message (40/64)
Fifth help item message (41/64)
Fifth help item message (42/64)
Fifth help item message (43/64)
Fifth help item message (44/64)
Fifth help item message (45/64)
Fifth help item message (46/64)
Fifth help item message (47/64)
Fifth help item message (48/64)
Fifth help item message (49/64)
Fifth help item message (50/64)
Fifth help item message (51/64)
Fifth help item message (52/64)
Fifth help item message (53/64)
Fifth help item message (54/64)
Fifth help item message (55/64)
Fifth help item message (56/64)
Fifth help item message (57/64)
Fifth help item message (58/64)
Fifth help item message (59/64)
Fifth help item message (60/64)
Fifth help item message (61/64)
Fifth help item message (62/64)
Fifth help item message (63/64)
Fifth help item message (64/64)
Default (English) message
10)HOURLY Z REPORT
19 <CASH>KEY @ Z MODE
11)MONTHLY X REPORT
20 <CASH>KEY @ X MODE
12)MONTHLY Z REPORT
20 <CASH>KEY @ Z MODE
Appendix: Compulsory
This section explains the priority compulsions and the methods to solve them.
Compulsions at the first item registration
Priority Error code
Meaning
1
E017
Force to enter check number.
2
3
E018
E019
Force to enter table number.
Force to enter the number of
customer.
Released by
<OPEN2>
✔
✔
✔
Action
Register check number by <NEWCHK>,
<OLDCHK>, <SEPCHK>.
Register table number.
Register the number of customer.
Compulsion during item registration
Priority Error code
1
E026
2
E041
Meaning
Force to register condiment/preparation
item.
Force to validate.
Released by
<OPEN2>
✔
✔
Action
Register condiment/preparation item.
Perform validation.
Compulsions during finalizing
Meaning
1
2
E030
E075
3
E059
4
5
E031
E033
Force to register <RATE TAX>.
Disable to finalize while the ST
amount is negative or equal to zero.
Force to register <EAT-IN> or
<TAKEOUT>.
Force to register <ST>.
Force to enter tendered amount.
6
E047
Force to print slip auto batch printing
Released by
<OPEN2>
Action
✔
✔
Register <RATE TAX>.
Register items until the ST amount becomes positive.
✔
Register <EAT-IN> or <TAKEOUT>.
✔
Press <ST>.
Enter tendered amount.
Insert paper to slip printer.
Appendix (Compulsory)
Priority Error code
Compulsions after finalization
Priority Error code
Meaning
Released by
<OPEN2>
Action
1
2
E047
E040
Force to slip batch print manually.
Force to issue guest receipt.
✔
✔
Insert paper to slip and press <SLIP>.
Issue guest receipt.
3
4
E041
E044
Force to print validation.
Force to print check.
✔
✔
Insert paper and press <VALID>.
Insert check to slip and press <CHK PRT>.
5
E045
Force to print check endorsement.
✔
Insert check to slip and press <CHK ENDS>.
TK-3200 Dealer's Manual
219
NINS
Appendix (Compulsory)
220
NINS
Appendix: Error code
Meaning
Mode switch position changed before finalization.
Clerk button pressed before finalization of a registration being performed under another clerk button.
The signed on clerk differs from the clerk performed
the tracking check registration.
Initialization or unit lock clear operation in progress.
E004 Error INIT/FC
E005 Insufficient memory Memory allocation exceeds total memory capacity.
E003 Wrong operator
E008 Please sign on
E009 Enter password
E010 Close the drawer
E011 Close the drawer
E016 Change back to REG
mode
E017 Enter CHK/TBL
number
E018 Enter Table number
E019 Enter number of
customers
E021 No DEPT Link
E023 Stock shortage
E024 No stock
E026 Enter condiment/
preparation PLU
E029 In the tender
operation
E030 Press RATE TAX key
E031
E033
E035
E036
E037
E038
E040
E041
E042
E044
E045
E046
E047
E048
Return the mode switch to its original setting and
finalize the operation.
Press the original clerk button and finalize the
transaction before pressing another clerk button.
Input correct check number or assign the proper clerk
number.
Complete operation.
Reallocate memory or expand memory (if possible).
Registration without entering a clerk number.
Operation without entering the password.
The drawer is left open longer than the program time
(drawer open alarm).
Attempt to register while the cash drawer is open.
Two consecutive transactions attempted in the refund
mode.
Attempt made to register an item without inputting a
check number.
Attempt made to register an item without inputting a
table number.
Finalize operation attempted without entering the
number of customer.
No department linked PLU is registered.
Actual stock quantity becomes less than the minimum
stock quantity.
Actual stock quantity becomes/is negative.
No condiment/preparation PLU is registered.
Enter a clerk number.
Enter password.
Close the drawer.
Item registration is prohibited, while partial tender.
Finalize the transaction.
Finalization of a transaction attempted without
registering rate-tax.
Finalization of a transaction attempted without
Press ST key
confirming the subtotal.
Enter tendered amount Finalize operation attempted without entering amount
tender.
Change amount exceeds Change amount exceeds preset limit.
limit
Contents of the drawer exceed programmed limit.
Remove money from
the drawer
High amount lock out/low digit lock out error
Digit or amount
limitation over
Read/reset operation without declaring cash in drawer.
Perform money
This error appears only when this function is activated.
declaration
Attempt to register a new transaction without issuing a
Issue guest receipt
guest receipt.
Attempt to register a new transaction without validation.
Print validation
Validation paper (slip printer) has run out.
Insert VLD paper
and retry
Attempt to register a new transaction without printing check.
Print Cheque
Print Check Endorse- Attempt to register a new transaction without printing
check endorsement.
ment
Registration buffer full.
REG buffer full
Separate check buffer full.
Attempt to register a new transaction without printing slip.
Print bill
No paper is inserted or paper is out in the slip printer.
Insert slip paper
and retry
TK-3200 Dealer's Manual
Action
Shut the cash drawer.
Switch to another mode and then back to the RF mode
for the next transaction.
Input a check number.
Input a table number.
Enter the number of customer.
Correct the program.
Perform stock maintenance.
Perform stock maintenance.
Register condiment/preparation PLU.
Register <RATE TAX>.
Press <SUBTOTAL>.
Enter the amount tendered.
Input amount tendered again.
Perform pick up operation.
Appendix (Error code)
Error
Message
code
E001 Wrong mode
Enter correct amount.
Perform money declaration.
Issue a guest receipt.
Perform validation operation.
Insert new validation paper.
Perform check print.
Perform check endorsement.
Finalize the transaction.
Allocate sufficient separate check buffer.
Perform slip printing operation.
Insert new slip paper.
221
NINS
Appendix (Error code)
Error code (…continued)
Error
Message
code
E049 CHECK memory full
Check tracking index memory full.
Finalize and close the check number currently used.
E050 DETAIL memory full
Check tracking detail memory full.
Finalize and close the check number currently used.
Meaning
E051 CHK/TBL No. is occu- Attempt to made use <New Check> to open a new
check using a number that is already used for an
pied
existing check in check tracking memory.
Attempt to use the same check number whilst the
E052 CHK/TBL No. is busy
specified number is being used in the other terminal.
Attempt made to use <Old Check> reopen a new check
E053 CHK/TBL No. is not
using a number that is not used for an existing check in
opened
check tracking memory.
Check number range over.
E054 Out of CHK/TBL No.
range
E055 In the SEP CHK opera- Normal registration is prohibited during separate check
operation.
tion
All check number are occupied in range.
E056 CHK range full
E059 Press EAT-IN or TAKE- Attempt to finalize a transaction without specifying
<EAT-IN> or <TAKE-OUT>.
OUT key
External printer offline
E060 Printer offline
External printer went down.
E061 Printer error
External printer paper end
E062 Printer paper end
Action
Finalize and close the check that is currently under the
number that you want to use or use a different check
number.
Use another check number or close the check at that
terminal.
Use the correct check number (if you want to reopen a
check that already exists in check tracking memory) or
use <New Check> to open a new check.
Enter correct number.
Terminate separate check operation.
Recall the stored data.
Press <EAT-IN> or <TAKE-OUT>.
Replace new paper.
E064 Print buffer full
Printing buffer full
E066 Print from the beginning of the transaction
E075 Negative balance
cannot be finalized
E085 Data exist in consolidation file
E100 Operate at the master
terminal
E101 PLU maintenance file
full. Press <#2> to
exit
E103 PLU Code is not
exist. Input the PLU
Code
E105 PLU file full
E106 Item exists in the
PLU FILE
E112 Close the journal
platen arm
E114 Close the receipt
platen arm
E139 Negative balance is
not allowed
E146 Arrangement file full
E164 Employee No. is not
Found in the Employee
File
E165 Employee No. is not
Clocking-in.
E166 Employee No. is
Occupied
E176 Time&Attendance file
full
E200 Insert CF card
E201 Illegal Format
E202 File not found
E203 Insufficient memory
E205 File already exist.
Attempt to print the last separated transaction on slip.
Print from the beginning of the transaction
Attempt to finalize a transaction when balance is less
than or equal to zero.
Data exists in the consolidation file.
Register item(s) until the balance becomes positive
amount.
Clear the data.
Prohibit master operation.
Perform it at master terminal.
Scanning PLU direct maintenance/batch maintenance
file becomes full.
Terminate the maintenance.
PLU code is not existed in the file.
Enter proper PLU code.
222
NINS
Scanning PLU/not found PLU file full
Modify the designated item.
The designated item has already existed in the scanning
PLU file.
The journal platen arm is opened.
Close the journal platen arm.
The receipt platen arm is opened.
Close the receipt platen arm.
Attempt to register <–> or <CPN> when the balance
becomes negative.
Arrangement file is full.
Attempt to enter a wrong employee number which is
not set to the employee file.
Enter proper minus/coupon amount.
Attempt to clock out the employee who is not clocked
in.
Attempt to clock in the employee who has clocked in
already.
Time and attendance file becomes full.
Enter proper employee number.
Set the arrangement properly.
Enter proper employee number.
Enter proper employee number.
Delete unused employee number or reallocate the time
and attendance file.
No CF card is set.
Set CF card.
Illegally formatted CF card
Format the CF card.
The designated file is not found in the CF card.
Enter proper file name.
Insufficient memory in the CF card.
Use a vacant (formatted) CF card.
Can not write, because designated file has already been Check the operation and retry.
in the CF card.
System error code
Meaning
File I/O errors
750
File cannot be created.
751
No designated drive
752
FCB area shortage of flash memory
753
No appropriate record number is designated.
754
No partition exists.
755
No vacant record is remained.
756
Changing is not permitted.
757
The designate file cannot be found.
758
The same file has already existed.
759
The same page has already existed.
760
No vacant record is remained.
762
The contents of internal memory and CF card are different.
763
The contents of scanning PLU file among the master/satellite
terminals are different.
764
Write error
CF card I/O errors
781
CF card device error
783
CF card format error
785
No designated file
788
The file is already existed in the CF card.
Communication errors
2000
Network join error
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
Time over
Parameter error
Time out
ID number over error
Packet error
ID
WAK receive error
Packet type error
Sequence error
Packet format error
Time over (5 seconds)
User time out
Other communication error
Not found PLU area error
Online port open error
No response
File not found
File create error
TK-3200 Dealer's Manual
Error
code
Meaning
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
File I/O error
Retry error
Receive SYN error
Receive FIN error
FIN is in sending sequence whole recalling n_write()
Illegal format
Illegal command
Busy with response
Communication abortion
Online receiving hardware error
2033
2034
Online receiving overrun
Online sending hardware error
2036
Token is not detected while sending
2037
Time over while detecting DSR ON
Program data send/receive (auto-program) errors
2100
Command code error
2101
Index format error
2102
Machine ID number error
2103
Maximum record number error
Mail box function errors
2300
Mail box full error
2301
Job number error
Other errors
2900
Break operation
2901
Password error
2902
I/O parameter program error
Logic driver initialize common errors
5000
Parameter error (Illegal information of I/O parameter)
5001
No connection (Illegal information of I/O parameter)
5010
Logical driver COM open error
5011
Logical driver COM double open
5012
Logical driver COM not open
5013
Logical driver COM device error
5014
Logical driver COM remain data error
MODEM errors
5300
MODEM initialize error
5301
MODEM open error
5302
Negotiation error
5303
AT command sending error
5304
Control ER error
5305
Receive status error
Appendix (Error code)
Error
code
223
NINS
Appendix (Error code)
224
NINS
Index
A
action code 100
activation of batch maintenance 97
add check 31, 79, 113
add-in rate tax 86
add-in tax 180
add-on rate tax 85
add-on tax 179
Arabic font 184
arrangement 25, 31, 69, 88, 113, 198
arrangement table 25, 123, 131
AT command 24, 110, 123, 134
AT command file 201
Australian GST 47, 148
auto-program 137, 140
average sales per customer 180
B
backup system for local/remote printer 175
Baltic font 183
barcode system 169
batch feature programming 52
batch maintenance PLU 25, 97, 170
batch maintenance PLU file 192
batch X/Z 26, 87, 108, 123, 129, 153, 197
best 50 report 158, 165
bill 70
bill bottom message 47
bill copy 31, 113
bill copy message 47
bill top message 47
Bon receipt control 56
bottle link 100
bottle link table 26, 93, 123, 132, 193
bottle return 31, 79, 113
bottom message 47
C
check detail 25
check endorse message 26
check endorsement 31, 68, 113, 130
check endorsement message 108, 123
check endorsement message file 197
check file 25
check index 25
check number 51, 80
check print 26, 31, 79, 113
check print control 88, 123, 131
check print file 198
check tender 31, 113
check tracking 47, 174
clerk 25, 87, 104, 123, 127, 151, 153
clerk assignment 143, 145
clerk control 81
clerk detail 25, 130, 190
clerk detail link 25, 80, 123, 190
clerk file 25, 190
clerk number 31, 74, 113, 143
clerk program 80
clerk report 161
clock-in 176
clock-in/out 31, 77, 113
clock-out 176
commercial message 47
commission 180
commission rate 82
condiment 47, 219
consecutive number 24, 33
coupon 31, 62, 113, 121, 179, 180
coupon 2 31, 79, 113
credit 31, 58, 113
cube 31, 76, 113, 179
currency exchange 31, 70, 113, 121
currency exchange control 41
customer 69, 180
customer display 11
customer number 31, 113
Cyrillic font 183
TK-3200 Dealer's Manual
Index
calculation & operation control 36
calculation method 179
cancel 31, 79, 113, 179
cash 31, 57, 113, 121
CF card 11, 12
CF card directory report 141
character code 116
character key table 26
character key table file 199
character keyboard 115
character print 60
character recall 26, 60, 123, 131
character recall file 198
charge 31, 57, 113
check 57, 121
check cashing service fee 180
225
NINS
Index
graphic logo 26
graphic logo file 201
Greek font 182
gross sales 179
group 24, 87, 104, 123, 126, 153
group file 189
group report 160
guest receipt 177
guidance message file 202
D
date order 33
date setting 119
decimal point 31, 113
declaration 31, 38, 79, 113, 154, 155, 161, 180
deleting a file from CF card 142
department
24, 31, 52, 54, 113, 114, 123, 126, 153
department best 50 153
department file 189
department report 159
deposit 31, 63, 113
descriptor 103
diag mode 20
direct maintenance PLU 25, 170
direct maintenance PLU file 192
discount 31, 65, 113, 121, 179, 180
drawer 12, 14, 34, 38, 40, 58, 59, 80, 143, 146
drawer assignment 143
H
hardware configuration 11
help message 109
HHS-15 12, 14
high amount limit 55
hourly sales 24, 123, 127, 153
hourly sales file 191
hourly sales report 162
HS1250 14
I
E
I/O parameter table 24, 94, 123, 134
I/O parameter table file 201
in drawer 149, 154, 155, 161, 180
individual feature programming 54
individual item/key report 154
init 2 19
initialization 17
initialize code 24
initialize code file 200
eat-in 31, 78, 113, 177
editing character 117
employee 25, 109, 123, 132
employee file 194
employee number 90
enter 31, 113
error code 221, 222, 223
error correction 31, 66, 113, 179
error message 26, 110, 123, 135
error message file 202
Euro 48, 143, 146, 178, 181
exempt 72
external printer 12, 14, 175
intermediate message 47
IPL (Initial program loading) 15
IPL via CF card 16
IPL via COM port 15
issuing program reading report 123
item/clerk descriptors by range 114
F
file allocation 23
file reset 153, 167
financial report 154
fixed totalizer 24, 87, 103, 123, 124, 153, 179
fixed totalizer file 187
flag clear 19
flat-PLU 31, 52, 54, 113, 114
font code 181
foreign currency in drawer 180
formatting CF card 141
function and total file 24
future order 177
G
general control 26, 123, 128
general control file 195
general control program 33
grand total 25, 104, 123, 128, 180
grand total file 195
graphic image file 201
226
NINS
J
job command table 92
K
key allocation 29
key function/machine feature 33
key table 26
key table file 199
L
link 54
loan 31, 61, 113, 180
online password file 201
open 31, 113
open check 31, 79, 113, 153
open check report 163
open2 31, 73, 113
operation control 36
operation start date file 200
operator display 11
operator read/reset 31, 113
operator x/z 74
order control 45, 55
M
N
net sales 179
new balance 31, 59, 113, 121
new balance fee 180
new check 31, 76, 113
new/old check 31, 76, 113
no sale 31, 79, 113
non add 31, 68, 113
non add/no sale 31, 68, 113
non PLU table 25, 96, 123, 131, 169
non PLU table file 192
O
OBR 31, 79, 113, 169
old check 31, 79, 113
one touch NLU 31, 78, 101, 113, 133, 169, 171
one touch NLU table 25, 123
one touch NLU table file 193
online configuration 14
online control 41
online password 24, 123, 134
TK-3200 Dealer's Manual
P
paid out 31, 61, 113, 180
password 20, 21, 33, 149
peripheral device 14, 185
pick up 31, 61, 113, 180
PLU 24, 31, 52, 54, 79, 113, 114, 123, 125
PLU best 50 153
PLU by group 87, 153
PLU by menu 153
PLU by record number/random code 153
PLU file 188
PLU individual by department 151
PLU individual by group 151
PLU range by random code 152
PLU range by record number 152
PLU report 157
PLU reset 153, 167
PLU stock 87
PLU stock all PLU by record number 153
PLU stock by group 87, 153
PLU stock individual by department 151
PLU stock individual by group 151
PLU stock range by random code 152
PLU stock range by record number 152
PLU stock report 158
plus 31, 62, 113, 121, 179
power switch 13
power switch cover 11
premium 31, 65, 113, 121, 179
preparation 219
previous balance 31, 64, 113
previous balance subtotal 31, 79, 113
price 31, 79, 113
price change 31, 77, 113, 169
price inquiry 31, 79, 113, 169
price shift 31, 37, 73, 113, 169
print control 44
print control for fixed total report 38, 39
print control for grand total 43
print control for guest receipt and slip 45
print control for receipt 35
print control for report 42
print control for taxable amount 40
printer connection table 24, 123, 133, 175, 200
printer cover 11
Index
manager control mode 143
manager operation 143
manual tax 31, 66, 113, 179
media change 31, 79, 113
memory map 15
menu 72
menu & price shift 37
menu shift 31, 113
merchandise subtotal 31, 75, 113
message 107
message control 46
minus 31, 62, 113, 121, 179
miscellaneous message 26, 110, 123, 134
miscellaneous message file 206
mix & match
87, 89, 100, 109, 123, 132, 153, 173
mix & match report 166
mix & match table 25
mix & match table file 193
mode control 82
mode switch 11
MODEM 14
money declaration 149, 150
money declaration in the REG1/REG2/RF modes
149
monthly 87
monthly report 162
monthly sales 25, 153
monthly sales file 191
multi drawer 12
multilingual font 181
multiple price 172
multiplication 31, 76, 113, 179
227
NINS
Index
printing guidance message 26, 110, 123, 134
printing guidance message file 207
printing history 2
program / message / buffer file 26
program 1 programming in X1 mode 143, 148
program guidance message 26, 111, 123, 135
program guidance message file 211
program reading report of program 1 122
program reading report of program 2 118
program reading report of program 3 102
program reading report of program 4 32
program reading report of program 5 27
program sub mode 21
Q
quantity/for 31, 76, 113
Quick Scan 6000 14, 186
R
random code 55
rate 121
rate tax 31, 66, 113, 121
read/reset report 149
recall 31, 79, 113
recall character message 109
receipt 31, 67, 113
receipt message 26, 123, 130
receipt message file 197
receipt on/off 31, 79, 113
received on account 31, 61, 113, 180
red price 31, 79, 113
refund 31, 79, 113
registration buffer 26
registration guidance message 26, 111, 123, 135
registration guidance message file 214
remote printer buffer 26
report (batch) 153
report (individual file) 152
report (individual item/key) 150
report (range) 151
report code 87
report header 26, 108, 123, 129
report header file 196
return 179
review 31, 74, 113
revised point 2
RF mode 180
Robotics 14
rounding 34, 180
S
sales ratio 150
scanner 12, 14
scanning 49
scanning PLU 25, 123, 127, 169
scanning PLU best 50 by range department 152
scanning PLU by range department 152, 153
228
NINS
scanning PLU by range group 152
scanning PLU direct maintenance 98, 121
scanning PLU file 25, 192
scanning PLU inactive item by range department
152
scanning PLU index 25
scanning PLU maintenance 97
scanning PLU report 164
scanning PLU reset 153, 167
scanning PLU stock by range department 153
scanning system setup 169
scheduler 26, 91, 123, 132
scheduler file 198
secret number 80
separate check 31, 79, 113
separate check buffer 25
set menu 55
set menu table 26, 123, 129
set menu table file 196
set the AT command to default value 142
set the AT command to MODEM 142
sheet holder 11, 12
Singapore tax 86
single item 179
Slavic font 182
slip 71
slip back feed/release 31, 113
slip backfeed/release 79
slip feed/release 31, 79, 113
slip print 31, 113, 177
slip print buffer 26
slip printer 12, 14
slip/local/remote printer message
26, 109, 123, 131
slip/local/remote printer message file 197
slit drawer 37
SP-1300 12, 14, 185
special character 26, 105, 123, 128
special character file 196
split price 179
square 31, 76, 113, 179
standard font 181
start date 24
stock 55, 100
stock inquiry 31, 79, 113
stock quantity maintenance 143, 144
store 31, 79, 113
store/recall/auto new check number 51
stroke keyboard 11
subtotal 31, 75, 113
system configuration 11
system error log 24
system error log file 201
system error log report 141
system file 24
system utilities 137
T
table analysis 25, 87, 104, 123, 128, 153
table analysis file 194
table analysis report 163
table number 31, 79, 82, 83, 113
takeout 31, 78, 113, 177
tax exempt 31, 113
tax shift 31, 71, 113
tax system 34
tax table 26, 84, 123, 129
tax table file 196
taxable amount subtotal 31, 113
taxable status 53, 62, 64, 65, 89, 101
taxable subtotal 71
terminal connection table 24, 110, 123, 133
text print 31, 113
text recall 31, 113
three zero 31, 113
till timer 40
time & attendance 153
time & attendance report 167
time and attendance 25, 176
time and attendance file 194
time setting 119
time zone 83, 87
tip 31, 60, 113
touch keyboard 11
transaction key 24, 87, 113, 123, 124, 153, 188
transaction key program 57
transaction key report 156
tray total 31, 75, 113
two zero 31, 113
U
unit price 119
unit price and unit quantity (1st) 119
UP-360 185
V
validation 31, 79, 113
VAT 31, 79, 113
void 31, 67, 113, 179
W
watermark print file 201
X
TK-3200 Dealer's Manual
Index
X/Z guidance message 26, 111, 123, 135
X/Z guidance message file 209
229
NINS
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
CA0510-B
TK3200DM(NINS)*E
Printed in Japan