Say Goodbye To Dropped Calls
PRODUCT CATALOG
Improving Your Cellular Signal with the World’s Best-Performing
and Most Powerful Cell Phone Signal Boosters and Antennas
2010
ENGINEERING • EXPERIENCE • EXPERTISE • PERFORMANCE
60,000 Square-Foot Manufacturing and
Engineering Facility in St. George, Utah
Wilson Electronics, Inc. designs, manufactures and sells cell phone signal boosters, antennas and other
components that extend and improve wireless service coverage indoors and on the go. Wilson’s boosters
and antennas solve the problems of dropped calls, lost data and transmission quality issues that users
routinely experience on every wireless network. Wilson’s products currently operate in the frequency ranges
on all major systems in the U.S., Canada, and Latin America and amplify transmissions for all mobile phones
and laptop data cards. Wilson sells its products using a two-tier distribution system to a growing market of
consumers, mobile professionals and business users through a network of more than 5,000 specialty retail
and carrier stores in the U.S., Canada, Latin America and other locations around the globe.
ENGINEERING TEAM
Dr. Dwight Heim, EE
Earned a Ph.D. in Electrical Engineering
and was named Professor Emeritus at the
University of Michigan. Dr. Heim taught
Electrical Engineering and has authored
and published many technical articles and
papers.
Alan Van Buren, EE
Graduated from the University of California,
Santa Barbara, with a Bachelor of Science
degree in Electrical Engineering in 1971. He
has 37 years of experience in RF design and
holds several industry patents.
Amateur Radio Call Sign: K7CA
Patrick L. Cook, EE
Graduated from the University of Nevada,
Las Vegas, with a Bachelor of Science
degree in Electrical Engineering in 1994. He
completed post-graduate work in antenna
theory and design.
Amateur Radio Call Sign: KC7WJN
Richard “Riki” Kline, EE
Graduated from the University of Nevada,
Reno, with a Bachelor of Science degree in
Electrical Engineering, cum laude, in 1967
and has more than 40 years of experience
in RF design, electromagnetic compatibility,
reliability and quality engineering.
Amateur Radio Call Signs: K7NJ, 4X4NJ
Vlad A. Skrypnyk, EE
Graduated from the Kharkiv Technical
University of Radio Electronics, Kharkiv,
Ukraine, in 1971 and has 37 years of
experience in RF design. He has also
authored and published 34 technical
articles and two books in Russian.
Amateur Radio Call Signs: AA7DJ, UY5DJ
Lisa Stewart, IE
Graduated from the University of Wisconsin,
Madison, with a Bachelor of Science
degree in Industrial Engineering, summa
cum laude, in 2001. A specialist in enterprise
improvement methodology, lead time
reduction, theory of constraints, testing
methods and design of experiments. She
holds a Six Sigma Black Belt Certification.
Weston B. Johnson, EE, CE
Graduated from DeVry University in
Phoenix, Arizona with a Bachelor of
Science degree in Electrical Engineering in
2003 and a Bachelor of Science degree in
Computer Engineering in 2002.
Amateur Radio Call Signs: KF7HFG
Frank Iglesias, EET
Graduated from Southern Utah University,
Cedar City, with a Bachelor of Science
degree in Electrical Engineering
Technology in 2003.
Robert Richey, EET
Graduated cum laude from Weber State
University in Ogden, UT with a Bachelor of
Science Degree in Electronics Engineering
Technology in 2003.
Amateur Radio Call Signs: KF7HFF
www.wilsonelectronics.com
Toll Free 1-866-294-6996
CONTENTS
PAGE
Company Profile
Table of Contents / Warranty Information
Symbol Index
Passenger Vehicles
1
Problem: Dropped Calls / Solution: Wilson Electronics
2,3
Stay Connected On the Go / Stay Connected Indoors
4,5
Commercial Vehicles
Recreational Vehicles
Why Wilson?
6
Utility Vehicles
Sleek™ Cell Phone Signal Booster
7
Residential Buildings
AMPLIFIERS
Industrial / Commercial Buildings
SIGNALBOOST™
Mini-Mobile Dual-Band Wireless Amplifier
8
SIGNALBOOST™
MobilePro™ Dual-Band Wireless Amplifier
9
SIGNALBOOST™
HDMobile™ Wireless Single & Dual-Band Amplifiers
10,11
SIGNALBOOST™
HDSOLO™ Dual-Band Amplifiers
12,13
Cradle Booster™ Wireless Amplifier/Chargers
14,15
Direct-Connection Amplifiers
16,17
Building Wireless Cellular Amplifiers
18,19
SIGNALBOOST™
DB Pro Building Wireless Cellular Amplifier (75ohm)
Small Office / Home Office (SOHO) Wireless Amplifier
SIGNALBOOST™
DT Dual-Band 800/1900 MHz Desktop Amplifier
20,21
22
23
Mobile Plug and Play Kits
24,25
Building Solutions
26,27
ANTENNAS
Trucker Antennas
28,29
General Vehicular External Antennas
30,31
Low Profile & Ultra-Slim Antennas
32
Cradle Plus Antennas
33
Yagi Antennas
34
Building Antennas
35
Marine Craft
Warranty Information
30-Day Money-Back Guarantee
All Wilson Electronics products are protected by Wilson’s 30-day
money-back guarantee. If for any reason the performance of any
product is not acceptable, the product may be returned to the reseller
with a dated proof of purchase.
Signal Booster Warranty
Wilson Electronics signal boosters are warranted for one (1) year
against defects in workmanship and/or materials.
Antenna Warranty
Wilson Electronics antennas are warranted for ninety (90) days against
defects in workmanship and/or materials. (Trucker antennas are
warranted for one year.)
Warranty cases may be resolved by returning the product directly
to the reseller with a dated proof of purchase. Signal Boosters and
antennas may also be returned directly to the manufacturer, at the
consumer’s expense, with a dated proof of purchase and a Returned
Material Authorization (RMA) number supplied by Wilson Electronics.
Wilson shall, at its option, either repair or replace the product and will
pay for delivery of the repaired or replaced product back to the original
consumer within the U.S.
These warranties do not apply to any products determined by Wilson
Electronics to have been subjected to misuse, abuse, neglect or
mishandling that alters or damages physical or electronic properties.
RMA numbers may be obtained by phoning Technical Support at
866-294-1660.
OTHER PRODUCTS
Antenna Adapter Type Descriptions
36
Mounts and Replacement Parts
37
Taps, Splitters, Lightning Protection, Combiner/Diplexer
38
Connectors & Crimp Connectors
39
Coaxial Cables
40
Portable Amplifier Vented Soft Carrying Case
40
Power Supplies
41
www.wilsonelectronics.com
1
Toll Free 1-866-294-6996
The Problem: Dropped Calls
Everyone who uses a cell phone or data card
knows how aggravating it is to drop a call or
not be able to connect. Fortunately, Wilson
Electronics has the solution! Our industry-leading
cell phone signal boosters and antennas enable
you to connect and maintain calls by improving
your cellular signal at home, at work or on the go.
Wilson keeps you connected!
Reasons for Dropped Calls and Slow Data Rates
Dropped calls are generally due to two reasons:
1. Location of the Nearest Cell Tower Cel-
lular reception in many areas is negatively
affected by terrain features such as hills and
valleys, but distance plays the biggest role in
limiting cellular communications, especially
in rural areas. The farther you are from a cell
tower, the weaker your signal will be.
2. Natural and Man-made Obstructions
Hills, trees and buildings all interfere with the
quality of the cellular signal between your
phone or data card and the cell tower. You
may be relatively close to a cell tower but
unable to connect because of obstructions.
Stucco and concrete walls used in homes,
offices and other buildings block cellular signals, making it difficult to make a call.
For stranded motorists and emergency services personnel, the inability to
make a cell phone call can mean the difference between life and death.
For people who rely on their cell phone or data card for business, it can affect the outcome of important business decisions or relationships.
Stay connected
in buildings
Man-made Obstruction
(Metal/Concrete Structure)
www.wilsonelectronics.com
2
Toll Free 1-866-294-6996
The Solution: Boost Your Cell Phone Signal
With Wilson Products
Wilson cell phone boosters eliminate the frustration of dropped calls, limited range and slow data
rates by amplifying incoming and outgoing phone signals in both mobile and building situations.
With a reputation as the finest in the business, our bi-directional boosters and antennas are
expertly engineered to detect and amplify weak incoming signals your cell phone would miss, and
simultaneously broadcast a much stronger signal back to the cell tower.
Product testing proves that Wilson boosters lead the industry with:
• The highest receiver sensitivity: captures weak or distant cellular signals
• The highest power output: reaches distant cell towers
• Microprocessor-controlled circuitry: patented technology that
protects cell towers
Wilson’s wide range of plug-and-play packages and individual
products for custom installations offer great value and ensure
reliable cellular communication at work, at home and on the go.
Introducing the Sleek™,
Wilson Electronics newest addition to
its cradle booster line of products.
Stay connected
in trouble spots
Stay connected
in trouble spots
Man-made Obstruction
(Metal/Concrete Structure)
Stay connected as
much as 6 times
farther with a Wilson
signal booster
Natural Obstructions
www.wilsonelectronics.com
Weak Signal Due to Distance
3
Toll Free 1-866-294-6996
Stay Connected On The Go
CAR
TRUCK
RV
EMS
BOAT
Mobile Solutions
Whether you’re traveling on the open road, in the wild, or on the water, Wilson Electronics
keeps you connected!
Wilson manufactures powerful mobile wireless and direct-connection cell phone
signal boosters for all carrier frequencies (Cellular, PCS, and Nextel/iDEN), as well as
high-gain antennas with magnet, mirror, glass, and permanent mounts. In a wireless
installation, which requires no physical connection between the cell phone and signal
booster, the exterior antenna collects weak cellular signals and sends them to
the booster. The booster, powered through the cigarette lighter, amplifies
those signals and rebroadcasts them to cell phones and data cards
in the vehicle through the interior antenna. When
a cell phone or data card transmits,
the process is reversed and the
amplified signals are transmitted
2
back to the cell tower.
1
3
Typical Wireless Installation
1. Exterior antenna
2. MobilePro Signal Booster
3. Cigarette lighter power supply
SignalBoost HDMobile 801212
SignalBoost MobilePro 801241
SignalBoost HD Solo 811210
The perfect choice for the user looking
to improve cellular signals for a single cell
phone or data card. Includes SignalBoost
amplifier, exterior Magnet Mount antenna
and interior Cradle Plus antenna.
The MobilePro can be easily moved from
vehicle to building making it great for cars,
hotels, airports and offices. Includes the
MobilePro amplifier, exterior Mini Magnet
Mount Antenna and multiple mounting
options and power supply options.
Wilson’s most popular mobile signal booster
combines with the exterior Magnet Mount
antenna and interior Low Profile antenna
for a high performance multi-user option.
SUPPORTS
SINGLE
USER
www.wilsonelectronics.com
4
Toll Free 1-866-294-6996
Stay Connected Indoors
HOME
APARTMENT
SMALL OFFICE
HIGH RISE
WAREHOUSE
Building Solutions
Wilson Electronics offers a full line of high-performance building signal booster and
antennas to give you a strong, reliable cell phone signal indoors.
2
3
Wilson manufactures building signal boosters and antennas to improve cell phone
performance in a single room, an entire home, a large warehouse, or a multi-story
office building. A typical wireless building system includes an outside antenna
that detects weak cellular signals
and sends them to the amplifier.
Powered through a standard AC
1
outlet, the booster amplifies those
signals and sends them to the inside
antenna,
which communicates the stronger
4
signal to cell phones and data cards in the
building. When a cell phone or data card
transmits, the process is reversed.
Typical Wireless Installation
1.
2.
3.
4.
Outside antenna
Signal Booster
AC power supply
Inside antenna
COMMERCIAL
Building Single Band
Wireless Kits 801165 801365
RESIDENTIAL
SMALL OFFICE • HOME OFFICE
SOHO 801245
Features an exterior high gain omni directional antenna (eliminates antenna
pointing) and the interior panel antenna. Includes everything needed for
simple installation.
SUPPORTS
ONE ROOM
www.wilsonelectronics.com
SignalBoost DB Pro 841262
The DB Pro was designed for simple installation using standard TV cable often pre-wired
in homes and an external omni directional
antenna. Also includes the interior panel
antenna and high gain DB Pro amplifier.
Each of these powerful signal booster Plugand-Play kits include an Exterior Yagi antenna and Interior panel antenna.
SUPPORTS
LARGE
BUILDINGS
SUPPORTS
WHOLE
HOUSE
5
Toll Free 1-866-294-6996
WHY WILSON?
Simply, because of our patented technology that prevents interference with
the cell phone carriers and their towers making Wilson Electronics’ bi-directional cell phone signal
boosters the most technologically advanced on the market today. Also referred to as amplifiers,
its most important feature is patented oscillation shutdown protection, which activates complete
shutdown within just a few milliseconds to prevent harmful interference to cell towers. Wilson
boosters also offer completely adjustable software-controlled automatic gain control, both on
forward and reverse links, which allows them to meet CDMA and GSM ACPR requirements. The
boosters are invisible within CDMA and GSM systems. They also have the capability of following base
station power requests which allows maintaining the full power dynamic range of the cell phone.
The Relationship Between Gain and Power Output in Signal Boosters
Have you wondered why a
direct-connection cell phone
signal booster with 12 dB gain has
3 watts of power output, and a
wireless booster has 40 dB gain
and 3 watts of power output?
Gain is the number of times
the power into the booster is
increased at the output of it.
Gain is expressed in dB’s, a way
to make large numbers easier to
write. For example, 10 dB is a gain
of 10 times, 20 dB is a gain of 100
times. For example, 1 watt into a
booster which has 10 dB gain puts
out 10 watts. But that’s not the
whole story. What if the booster is
only capable of 3 watts output?
The booster is then over-driven.
Too much input power results in 3
watts of distortion, just like yelling
into a microphone and distorting
a hi-fi system. The same happens
to the cell phone signal booster,
which causes it to interfere with
adjacent channels on the cell
tower.
The maximum power that can
be applied to a 10 dB 3-watt
amplifier is .3 watts, which gives
3 watts of undistorted output. A
cell phone connected to a directconnection booster with normal
cell phone maximum power (.2
watts) going into the booster and
a gain of about 12 dB gives 3
watts of undistorted output power
to the cell tower. Any more input
power would not increase the
output, but only distort it, which
causes harmful interference.
A gain of 15 times is 11.8 dB.
The following table will give you
an idea of how dB’s relate to
the number of times the signal is
amplified:
10 dB = gain of 10
13 dB = gain of 20
16 dB = gain of 40
19 dB = gain of 80
20 dB = gain of 100
30 dB = gain of 1,000
40 dB = gain of 10,000
50 dB = gain of 100,000
60 dB = gain of 1,000,000
As you can see, around 12 dB
(15 x) is the maximum gain that
you need on a direct-connection
booster. Direct-connection
boosters with 20 dB or more gain
are only wasting its power by
generating signals that interfere
on adjacent cell phone channels
– actually causing less power
where you need it. Remember
that you only have 3 watts, which
is now divided over a bigger
bandwidth, causing harmful
interference.
Why do we need higher gain
boosters? Let’s look at a 40 dB
mobile wireless 3-watt booster.
We need more gain because
when the cell phone has to
transmit to and receive from
the booster’s inside antenna
(which is about 1-2 feet from
www.wilsonelectronics.com
6
the cell phone), the signal is
much weaker into the booster
than the .2 watts that was
going directly into the directconnection booster. The signal
is now approximately 660 times
weaker when it enters its input.
It just so happens that a 40 dB
gain booster will put out 3 watts
with that input, so you can see
different gains are needed for
different applications. Also, in
an automobile situation with the
outside antenna on the roof of
the car and the inside antenna
near the headrest, 40 dB is
generally the maximum gain
before the booster starts causing
interference.
With building applications,
the cell phone is much farther
from the inside antenna;
therefore, a higher gain booster
is needed. A 50 to 60 dB gain will
generally give good coverage
in most building applications.
Signal boosters with higher gain
require much greater antenna
separation. For example, a
72 dB gain booster requires 4
times more antenna separation
distance than a 60 dB booster.
For technical help with questions
on signal booster installation,
please call 866-294-1660.
Toll Free 1-866-294-6996
Say Goodbye to Dropped Calls
Sleek™ Cell Phone Signal Booster
__________________________________________________
• Reduces dropped calls, extends signal range, and increases
data rates
• Up to 20 TIMES more output power to cell tower when in a
vehicle
• Receives weak signals the phone alone may not
• Extends battery life – Booster enables phone to work at
reduced power
• Adjustable arms to fit any phone
• Installs in minutes – no special tools required
• Package includes everything needed -- plug-and-play
• Attractive, compact design
SPECIFICATIONS
___________________________________________
Part Number
Frequency
815226
824-894 MHz / 1850-1990 MHz
Gain
20 dB
Max Output Power
31.8 dBM
Noise Figure
3.0 dB nominal
±4 dB
Isolation
> 40 dB
Power Requirements
5V
Connectors
SMA Female
Dimensions
2.25 x 4.25 x 2.5 (inch) 5 x 9.5 x 5.6 (cm)
Weight
_______________________________________________________
Wilson’s new Sleek™ improves both voice and data
performance on the road. With 20 times the power to the cell
tower of a cell phone alone, it features a built-in antenna,
battery charging port and works with Cellular (800 MHz) and
PCS (1900 MHz) frequencies.
The Wilson Electronics’ Sleek signal booster kit includes:
• Sleek™ all in one cradle combo: signal booster
• Outside vehicle mini magnet-mount antenna
• Cigarette lighter power adapter*
• Installation guide
• 30-day, “No Questions Asked” money-back guarantee
• Limited one-year product warranty
2.5 (oz) / 0.07 (kg)
*Use only with supplied cigarette lighter power supply
INSTALLATION
_________________________
Outside Antenna
Mini Magnet
Mount Shown
Power
adapter
7
Toll Free 1-866-294-6996
815226
Sleek™
Signal
Booster
www.wilsonelectronics.com
NEW PRODUCT
Flatness
KIT
B O O S T E R
• Simplifies hands free operation
S I G N A L
• Built-in battery charging port
P H O N E
• Built in signal booster amplifies signals to and from cell tower
C E L L
FEATURES
S L E E K ™
800/1900 MHz
Wilson Electronics
801230
800/1900 MHz
Wilson Electronics
Say Goodbye to Dropped Calls
Mini-Mobile™
Dual-Band Wireless Amplifier
SIGNALBOOST
™
FEATURES
__________________________________________________
• Installs in minutes – no special tools required
• Portable – can easily be moved between vehicles
• Wireless operation - no physical connection to cell phone or data card
• Supports multiple users in vehicle
• Amplifies signals to and from the cell tower
• Microprocessor-controlled circuitry ensures reliable operation within
regulatory standards
• Improves signals for both voice and data
• Six times more power than a typical cell phone
• DC power supply included (cigarette lighter type), AC power supply
sold separately
• Oscillation protection and shutdown auto reset
• FCC and IC Type Accepted
M I N I - M O B I L E
D U A L - B A N D
W I R E L E S S
A M P L I F I E R
SPECIFICATIONS
_______________________________________
Part Number
Frequency
801230
824-894 MHz / 1850-1990 MHz
Gain
40 dB / 42 dB
Max Output Power
1.7 watts
Max RF Output
(down)
+8 dBm
Noise Figure
KIT OPTIONS
________________________________________________________
Designed to satisfy the needs and preferences of different users, the MiniMobile is available in several plug-and-play kits with various options for
interior and exterior antennas.
SEE KIT COMPONENTS ON PAGE 24 & 25
Part Number
3.5 dB nominal
Flatness
±5 dB
Isolation
>90 dB
Power
Requirements
Interior Antenna
Exterior Antenna
801230
Ultra-Slim**
Purchased Separately*
801232
Ultra-Slim**
12” Magnet Mount
* These kits are designed for users who want to select a marine, RV, trucker, or other type of external antenna.
** Wilson’s Ultra-Slim Antenna enables discreet installation.
6V
Connectors
SMA Female
Dimensions
3.25 x 3.25 x 1 (inch)
9.6 x 8.1 x 3.8 (cm)
Weight
4 (oz) / 0.11 (kg)
INSTALLATION
__________________________________________________
Outside Antenna
Magnet Mount Shown
Power
adapter
Wireless Operation
No Physical
Connection
to Cell Phone
Mini-Mobile
Wireless
Amplifier
www.wilsonelectronics.com
8
Toll Free 1-866-294-6996
Say Goodbye to Dropped Calls
MobilePro™ Dual-Band
Wireless Amplifier
SIGNALBOOST
801240
800/1900 MHz
Wilson Electronics
™
FEATURES
__________________________________________________
Ideal for laptop data cards – can be powered by USB port.
• Portable – can easily be moved from vehicle to building
• Installs in seconds – no special tools required
• Features a built-in interior antenna
• Multiple power options - USB port, cigarette lighter, or AC adapter
• Wireless operation – no physical connection to cell phone or data card
• Microprocessor-controlled circuitry ensures reliable operation within
regulatory standards
• Oscillation protection and shutdown auto reset
• FCC and IC Type Accepted
KIT OPTIONS
________________________________________________________
SPECIFICATIONS
_______________________________________
Frequency
Noise Figure
Flatness
Isolation
Power
Requirements
Connectors
Dimensions
Weight
824-894 MHz / 1850-1990 MHz
40 dB / 42 dB
SEE KIT COMPONENTS ON PAGE 24 & 25
500 mw
+8 dBm
3.5 dB nominal
±4 dB
> 90 dB
5V — 8V
SMA Female
Part Number
Exterior Antenna
Interior Antenna
801241
12” Magnet Mount
Included
801242
4” Mini Magnet Mount
Included
801243
12” Magnet Mount
Sold Separately
801244
4” Mini Magnet Mount
Sold Separately
2 x 4.75 x 1 (inch) 5.1 x 12.1 x 2.5 (cm)
INSTALLATION
3 (oz) / 0.09 (kg)
Window Mount
Exterior Antenna
Outside Antenna
Magnet Mount Shown
Power
adapter
www.wilsonelectronics.com
9
Toll Free 1-866-294-6996
A M P L I F I E R
Mobile
Professional
Signal
Booster
W I R E L E S S
_________________
P R O F E S S I O N A L
Gain
Max Output
Power
Max RF (up/down)
801240
M O B I L E
Part Number
Wilson’s new SignalBoost™ Mobile Professional improves cell phone and
data card performance on the road, in airports, hotels and office buildings.
With 2 times the output power of a typical cell phone, it features a built-in
antenna, supports multiple phones and data cards, works with Cellular (800
MHz) and PCS (1900 MHz) frequencies, and offers multiple power options
(USB port, vehicle cigarette lighter or standard AC outlet). The Mobile Professional is available in four plug-and-play kits to meet specific user needs.
801101 / 801201 / 804002
Wilson Electronics
Say Goodbye to Dropped Calls
HDMobile™ Wireless Single &
Dual-Band Amplifiers Professional Series
SIGNALBOOST™
FEATURES
__________________________________________________
• Oscillation detection and shutdown with auto reset
• No physical connection to your cell phone or cellular data card
• Works on all generations of CDMA, TDMA, GSM, and 3G
• Passes TIA/EIA-98-E transmit tests for evaluating CDMA cellular phones
• Power control logic ensures maximum gain is within cellular standards
• Allows multiple phones and cellular data cards to be used simultaneously
DUAL-BAND
• Maximum 3 watts output power
• Overload protection circuit – protects cell system from overload
• Automatic reset – if overload occurs
• FCC and IC type accepted
SINGLE BAND
SPECIFICATIONS
Part Number
Frequency
Single Band 800 MHz
Dual-Band 800 / 1900 MHz
801101
801201
iDEN Single Band 800 MHz
KIT
804002
824-894 MHz
824-894 MHz / 1850-1990 MHz
806-869 MHz
Gain
40 dB
40 dB / 45 dB
40 dB
Max Output Power
3 watts
3 watts
3 watts
Max RF (downlink)
+10 dBm
+10 dBm
+10 dBm
3.5 dB nominal
3.5 dB nominal
3.5 dB nominal
Flatness
±3 dB / ±4 dB
±3 dB / ±4 dB
±3 dB / ±3 dB
Isolation
> 90 dB
> 90 dB
> 90 dB
12 V, 0.5-1.5 A max
6 V, 3 A max
12 V, 0.5-1.5 A max
Noise Figure
Power
Requirements
Connectors
FME-Male 50 ohms
FME-Male 50 ohms
FME-Male 50 ohms
Dimensions
5.5 x 4.3 x 1.4 (inch)
14.0 x 10.8 x 3.5 (cm)
4.5 x 3.5 x 1.25 (inch)
11.43 x 8.9 x 3.2 (cm)
5.5 x 4.3 x 1.4 (inch)
14.0 x 10.8 x 3.5 (cm)
1.32 lbs / 0.6 kg
1.5 lbs / 0.7 kg
1.32 lbs / 0.6 kg
Weight
M O B I L E
W I R E L E S S
A M P L I F I E R S
______________________________________________________________________________________________
KIT = Best Seller
KIT = Available in Plug-and-Play kit (Page 24)
www.wilsonelectronics.com
10
Toll Free 1-866-294-6996
MOBILE INSTALLATION DIAGRAM
801101 / 801201 / 804002
800 • 800 iDEN • 800/1900
_____________________________________________________________________________________________
Outside Antenna
Magnet Mount Shown
Inside
Antenna
Low Profile
Shown
Power
adapter
Mobile
Wireless
Amplifier
__________________________________
• Mini Magnet-Mount Antenna
• Magnet-Mount Antenna
• Trucker Antennas
From road warriors to truckers to soccer moms, thousands
of drivers depend on Wilson Mobile Wireless Amplifiers to
stay connected around town and on the open highway.
These powerful boosters enable cell phone and data card
users to extend their signal range, reduce dropped calls,
and increase data rates with no physical connection to
cell phone or data card. And, because they’re wireless,
these boosters support multiple users simultaneously.
W I R E L E S S
• NMO Antenna
__________________________________________________
M O B I L E
ANTENNA OPTIONS (Pages 28-33)
Mobile Wireless Amplifiers –
Peak Performance on the Road
A M P L I F I E R S
www.wilsonelectronics.com
11
Toll Free 1-866-294-6996
811210 / 811710 / 811910
Wilson Electronics
Say Goodbye to Dropped Calls
SIGNALBOOST™
HDSOLO™ Dual-Band Wireless Amplifiers
FEATURES
____________________________________________________
Inductively couples to phone with Ultra-Slim antenna - no adapter
required. Operates similar to direct connection amplifiers.
• Works with all Cellular/PCS cell phones and laptop data cards (except iDEN)
• Connects to ALL phones and data cards with a Universal Ultra-Slim
Antenna using a Velcro® patch
• No plug-in phone adapter needed
• Up to 10 times more power than your cell phone or laptop data card
• Significantly improves voice and data signal quality
• Increases data communication rates needed for 3G technologies
• Receives and transmits better than your cell phone
• Extends cell phone battery life
• Works great in mobile, building and marine applications
• Easy to install and use
• Works on all generations of CDMA, TDMA and GSM
• Up to 3 watts maximum power
S I G N A L B O O S T ™
W I R E L E S S
A M P L I F I E R S
• FCC and IC type accepted
KIT = Available in Plug-and-Play kit (Page 24)
= Best Seller
SPECIFICATIONS
______________________________________________________________________________________________
Part Number
Frequency
811210
KIT
811710
824-894 MHz
1850-1990 MHz
KIT
890-960 MHz
1710-1880 MHz
Gain
KIT
890-960 MHz
1885-2200 MHz
25 dB / 25 dB
Max Output Power
3 watts
Max RF (downlink)
+10 dBm
Noise Figure
3.5 dB nominal
Flatness
±2 dB / ±2 dB
Isolation
> 50 dB
Power
Requirements
12 V DC / 2 A max
Connectors
FME-Male 50 ohms
Dimensions
5 x 3.5 x 1.2 (inch) / 12.7 x 8.9 x 3 (cm)
Weight
www.wilsonelectronics.com
811910
1.03 lbs / 0.468 kg
12
Toll Free 1-866-294-6996
HOME/OFFICE INSTALLATION DIAGRAM
811210 / 811710 / 811910
800/1900 • 900/1800 • 900/2100 MHz
_____________________________________________________________________________________________
Cell Phone
Connection
Laptop
Connection
SIGNALBOOST™
Amplifier
SIGNALBOOST™
Amplifier
_____________________________________________________________________________________________
W I R E L E S S
Velcro™ Universal
Ultra-Slim Antenna
to the back of your
cell phone.
S I G N A L B O O S T ™
MOBILE INSTALLATION DIAGRAM
A M P L I F I E R S
www.wilsonelectronics.com
13
Toll Free 1-866-294-6996
805201 / 805206 / 805221
Wilson Electronics
Say Goodbye to Dropped Calls
Cradle Booster™ Wireless Amplifier/Chargers
FEATURES
___________________________________________
C R A D L E
B O O S T E R
W I R E L E S S
A M P L I F I E R / C H A R G E R S
NEW PRODUCT
• Installs in seconds – no special tools required
• Signal booster features a built-in interior antenna and
battery charging capabilities
• Increase phone’s voice and data performance in
weak signal areas
• Amplifies signals to and from cell tower
• Can be used for “Hands Free” operation
• Microprocessor-controlled circuitry ensures reliable
operation within regulatory standards
U-Booster™
Universal
805221
• Oscillation protection and shutdown auto reset
C-Booster™ for
BlackBerry® Curve™
805206
iBooster™ for
iPhone™
805201
SPECIFICATIONS
______________________________________________________________________________________________
Part Number
805201
805206
805221
824-894 MHz
1850-1990 MHz
824-894 MHz
1850-1990 MHz
824-894 MHz
1850-1990 MHz
40 dB / 42 dB
40 dB / 42 dB
40 dB / 42 dB
Max Output Power
2W
2W
2W
Max RF (downlink)
-20 dBm
-20 dBm
-20 dBm
3.5 dB nominal
3.5 dB nominal
3.5 dB nominal
Flatness
±4dB
±4dB
±4dB
Isolation
> 90 dB
> 90 dB
> 90 dB
12V*
12V*
12V*
Connectors
SMA Female
SMA Female
SMA Female
Dimensions
2 x 4.75 x 1 (inch)
5.1 x 12.1 x 2.5 (cm)
2 x 4.75 x 1 (inch)
5.1 x 12.1 x 2.5 (cm)
2 x 4.75 x 1 (inch)
5.1 x 12.1 x 2.5 (cm)
3 (oz) / 0.09 (kg)
3 (oz) / 0.09 (kg)
3 (oz) / 0.09 (kg)
Frequency
Gain
Noise Figure
Power
Requirements
Weight
www.wilsonelectronics.com
14
Toll Free 1-866-294-6996
MOBILE INSTALLATION DIAGRAM
805201 / 805206 / 805221
800/1900 MHz
_____________________________________________________________________________________________
NEW PRODUCT
Outside Antenna
Mini Magnet
Mount Shown
Power
adapter*
Wilson’s new cradle boosters improve both voice and
data performance on the road. With 20 times the power
to the cell tower of a cell phone alone, they feature a
built-in antenna, battery charger and works with Cellular
(800 MHz) and PCS (1900 MHz) frequencies.
• NMO Antenna
____________________________________________
• Mini Magnet-Mount Antenna
• Magnet-Mount Antenna
• Trucker Antennas
The cradle booster kits include:
A M P L I F I E R / C H A R G E R S
• Outside vehicle magnet-mount antenna
• Cigarette lighter power adapter*
• Installation guide
• 30-day, “No Questions Asked”
money-back guarantee
• Limited one-year product warranty
*Use only with supplied cigarette lighter power supply
www.wilsonelectronics.com
W I R E L E S S
ANTENNA OPTIONS (Pages 28-33)
________________________________________________
B O O S T E R
KIT
C R A D L E
Cradle
Booster &
Charging
Capabilities
15
Toll Free 1-866-294-6996
811101 / 811201 / 811701 / 811901 / 814021
Wilson Electronics
Say Goodbye to Dropped Calls
Direct-Connection Amplifiers
FEATURES
_______________________________________________________
• Improves voice and data signal quality
• Improves data communication rates needed for 3G technologies
• Power control logic ensures maximum output power is within cellular network standards
• Automatic gain control
• Advanced electronics receive and transmit better than a cell phone or cellular
data card
• Connects directly to cell phone with a Wilson antenna adapter
• Mobile, marine and building use
• Greatly reduces disconnects, drop-outs, and noise
• Transmits signal energy to the outside antenna
• 3-watt power signal booster
• FCC and IC type accepted
SPECIFICATIONS
D I R E C T - C O N N E C T I O N
A M P L I F I E R S
______________________________________________________________________________________________
Part Number
Frequency (MHz)
811101
811201
811701
811901
824-894
824-894
1850-1990
890-960
1710-1880
890-960
1885-2200
(with 1900 MHz bypass)
Gain
10 dB / 14 dB
Max Output Power
3 watts
Max RF (downlink)
5 watts
+15 dBm
3.5 dB nominal
3.5 dB nominal
Noise Figure
Flatness
± 2 dB / ±2 dB
Isolation
> 90 dB
> 90 dB
Power Requirements
±1.5 dB / ±1.5 dB
12 V, 0.5-1.5 A max
13.8 V, 3.5 A max
Connectors
FME-Male 50 ohms
Dimensions
5.5 x 4.3 x 1.4 (inch) / 14.0 x 10.8 x 3.5 (cm)
Weight
www.wilsonelectronics.com
814021
1.32 lbs / 0.6 kg
16
Toll Free 1-866-294-6996
Building Antenna Options
Pages 28-35
Directional Yagi Antenna
Magnet-Mount Antenna
Trucker Antenna
Marine Antenna
Outside Antenna
Yagi Antenna Shown
Optional Accessories
Page 38,40
Coax Cable Extension
Lightning Suppressor
2-way Splitter
Combiner/Diplexer
Taps
AC Power Supply
811101 / 811201 / 811701 / 811901 / 814021
800 • 800 iDEN • 800/1900 • 900/1800 • 900/2100 MHz
Cell Phone
PDA
Notebook
Direct
Connection
Signal
Booster
IMPORTANT
Mobile Antenna Options
Pages 28-33
Mini Magnet-Mount Antenna
Magnet-Mount Antenna
Trucker Style Antenna
NMO Antenna
Optional Accessories
Pages 40-41
Coax Cable Extension
Hardwire Power Supply Kit
Carrying Case
An up-to-date list can be found at
www.wilsonelectronics.com
Outside Antenna
Magnet Mount Shown
Cell Phone
PDA
Notebook
Direct
Connection
Signal
Booster
www.wilsonelectronics.com
17
Toll Free 1-866-294-6996
A M P L I F I E R S
Cigarette
Lighter
Adapter
D I R E C T - C O N N E C T I O N
A phone-specific adapter is needed with
all direct connection signal boosters.
801105 / 801165 / 801108 / 801110 / 801365 / 804005 / 804006 / 801506 / 801606
Wilson Electronics
Say Goodbye to Dropped Calls
Building Wireless Cellular Amplifiers
Professional Series
Versatile, Powerful Wireless Signal Boosters
for Use in Homes, Offices and other Buildings
__________________________________________
The performance of cell phones and laptop data cards
can be compromised in many buildings due to concrete,
stucco, or metal walls that block the cellular signals
coming in and going out. To remedy that problem, Wilson
offers a complete line of Building Wireless Signal Booster.
Available in 50dB and 60dB models, and covering various
frequency ranges, these indoor signal boosters support
multiple cell phones and data cards simultaneously and
are compatible with a wide variety of Wilson indoor and
outdoor antennas. The result? A strong, reliable cell signal
where you need it, at home or at work.
Supports Multiple
Users
FEATURES
A M P L I F I E R S
__________________________________________________________________________________________________________
• Works with all cell phones and laptop data cards
• Significantly improves voice and data signal quality
• Receives and transmits better than your cell phone
• Extends cell phone battery life
• Works on all generations of CDMA, TDMA, GSM and high-speed data technologies.
• Improves data communication rates needed for 3G technologies
• Automatic gain control up to 50 dB
B U I L D I N G
W I R E L E S S
• 2 dB gain step 30-50 dB and 40-60 dB
• Automatic gain adjusting in the event of oscillation and/or overload.
• Gain indicator lights
• Automatic shutdown on overload
• Up to 3-watt power amplifier
• Power control logic ensures maximum output power is within cellular network standards
• Oscillation protection and shutdown auto reset
• FCC and IC type accepted
www.wilsonelectronics.com
18
Toll Free 1-866-294-6996
SPECIFICATIONS
______________________________________________________________________________________________
Part Number
801105
801165
801108
801110
A
B
60 dB
60 dB
Channel
Gain (Rx/Tx)
Frequency
50 dB
65 dB
824-849 MHz
869-894 MHz
824-835 MHz 835-849 MHz
869-880 MHz 880-894 MHz
801365
804005
804006
65 dB
50 dB
60 dB
1850-1990
MHz
801506
801606
60 dB
806-824 MHz
851-869 MHz
880-915 MHz
925-960 MHz
1710-1785 MHz
1805-1880 MHz
Max Output Power
3 watts
2 watts
Max Downlink Power
3 watts
2 watts
3 dB nominal
4 dB nominal
3 dB nominal
3 dB typical
±2.5 dB
± 4 dB
±2.5 dB
±4 dB
Noise Figure
Flatness
Isolation
Power Requirements
3 watts
2 watts
3 watts
> 90 dB
> 90 dB
6 V DC, 3 A max
6 V AC, 3 A max
6 V DC, 3 A
Connectors
N-Female 50 ohms
N-Female 50 ohms
Dimensions
5.6 x 3.6 x 1.7 (inches)
14.2 x 9.1 x 4.4 (cm)
5.6 x 3.6 x 1.7 (inch)
14.2 x 9.1 x 4.4 (cm)
1.5 lbs / 0.7 kg
1.5 lbs / 0.7 kg
Weight
= Best Seller
801105 / 801165 / 801108 / 801110 / 801365 / 804005 / 804006 / 801506 / 801606
800 • 800 iDEN • 900 • 1800 • 1900 MHz
INSTALLATION
______________________________________________________________________________________________
Outside Antenna
Yagi Antenna Shown
W I R E L E S S
Dome
Antenna
Supports Multiple
Users
A M P L I F I E R S
Wireless Operation
No Physical
Connection
to Cell Phone
www.wilsonelectronics.com
B U I L D I N G
Building
Wireless
Signal
Booster
AC Power Supply
19
Toll Free 1-866-294-6996
801262
Wilson Electronics
Say Goodbye to Dropped Calls
Building Wireless Cellular Amplifier
SIGNALBOOST
DB Pro (75ohm)
™
NEW PRODUCT
Wilson’s highest gain dual-band (800 &1900 MHz)
wireless signal booster for use in homes, offices
and other buildings.
___________________________________________________
Supports Multiple
Users
The SignalBoost™ DB Pro cellular amplifier significantly improves
voice and data performance of any cellular device on any
network (Cellular and PCS) inside of buildings experiencing weak
signal, such as: homes, fire stations, command posts, offices and
other buildings. This 62 dB building signal booster combines high
performance with ease of installation. The DB Pro booster can
be used with an external omni-directional gain antenna with
multiple mounting options that eliminates researching cell tower
locations and antenna orientation. The internal dome or panel
antennas can be ceiling or wall mounted and offer the ability
to completely disguise the antenna on the inside of a building.
All components are interconnected using readily available RG-6
Coax, which is often found pre-installed, simplifying cable runs.
FEATURES
A M P L I F I E R S
______________________________________________________________________________________________________________
• Works with Cellular and PCS frequencies
• Significantly improves voice and data signal quality
• Works with multiple cell phones and data cards simultaneously
• Receives and transmits better than your cell phone
• Designed for use with standard RG6 (75 ohm) coax cable
• Works on all generations of CDMA, TDMA, GSM and high-speed data technologies
• Improves data communication rates needed for 3G technologies
• Automatic oscillation/overload protection
• FCC and IC type accepted
• Complete kit that includes the signal booster with all necessary antennas and
coax cable is available.
B U I L D I N G
W I R E L E S S
• Extends cell phone battery life
www.wilsonelectronics.com
20
Toll Free 1-866-294-6996
801262
800/1900 MHz
SPECIFICATIONS
Part Number
801262
Frequency
824-894 MHz / 1850-1990 MHz
Gain
62 dB / 62 dB
Max Output Power
2.5 watts
Max RF (up/down)
34 dBm / 15.7 dBm
Noise Figure
3.5 dB nominal
Flatness
±5 dB
Isolation
> 90 dB
Power
Requirements
120-240V AC, 50-60 Hz,
8W
Connectors
F-Female
Dimensions
6.2 x 4.2 x 1.5 (inch)
15.7 x 10.7 x 3.8 (cm)
Weight
NEW PRODUCT
_______________________________________________________________
*0.64 lbs / 0.29 kg
*Weight and dimensions are for amplifier only, for total kit
weight contact your Wilson sales representative.
INSTALLATION
______________________________________________________________________________________________
DB Pro
Wireless
Amplifier
Wireless Operation
No Physical
Connection
to Cell Phone
Panel
Antenna
www.wilsonelectronics.com
21
Toll Free 1-866-294-6996
A M P L I F I E R S
Supports Multiple
Users
W I R E L E S S
AC Power Supply
B U I L D I N G
Outside Antenna
Omni Antenna Shown
801245
800/1900 MHz
Wilson Electronics
Say Goodbye to Dropped Calls
Small Office / Home Office (SOHO)
Wireless Amplifier
SOHO Dual-Band Wireless Amplifier –
Perfect for Small Offices, Home Offices,
RV’s and Buses
_____________________________________________
For users needing improved cellular performance
in a small office or home office environment, Wilson’s
SOHO amplifier is a great solution. Offering dual-band
(800/1900 MHz) compatibility, the wireless SOHO
amplifier supports multiple cell phones and data
cards simultaneously. It can be paired with a wide
variety of Wilson indoor and outdoor antennas for a
truly customized system. Depending on outside signal
strength, the SOHO can improve cellular strength in a
single room or an entire home.
Supports Multiple
Users
FEATURES
_________________________________________________________________________________________
• Works on all generations of CDMA, TDMA, GSM and 3G technologies
• For 800 MHz Cellular and 1900 MHz PCS Bands
• Overload indicator lights
• Receiver sensitivity -110 dBm CDMA FER 1%
• AC power supply included
• FCC and IC type accepted
• Oscillation detection and gain reduction with auto reset intervals
• 3-watt power amplifier
SPECIFICATIONS
S O H O
W I R E L E S S
A M P L I F I E R
_____________________________________________
Part Number
Frequency
Gain
Max Output
Power
Max RF (up/down)
Noise Figure
Outside Antenna
Optional Yagi Antenna Shown
(Sold Separately)
824-894 MHz / 1850-1990 MHz
50 dB / 50 dB
1.5 watts
Inside Antenna
Optional Dome
Antenna Shown
(Sold Separately)
31.1 dBm / +10 dBm
AC Power
Supply
3 dB / 4 dB nominal
±5 dB
Isolation
> 90 dB
Cell phone, PDA, or
notebook
6 V AC / 3 A max
Connectors
FME-Male 50 ohms
Dimensions
5.6 x 3.6 x 1.7 (inch) / 14.2 x 9.1 x 4.4 (cm)
Weight
_____________________________________________
Parts Included
Bi-Directional Amplifier
AC Power Supply
801245
Flatness
Power
Requirements
INSTALLATION
Wireless operation - no physical connection to cell phone or cellular data card
1.5 lbs / 0.7 kg
www.wilsonelectronics.com
22
Toll Free 1-866-294-6996
Say Goodbye to Dropped Calls
DT Dual-Band 800/1900 MHz
Desktop Amplifier
SIGNALBOOST
801247
800/1900 MHz
Wilson Electronics
™
For Small Office, Desk or Workspace Uses
Easy Set-up - Everything You Need is Included
____________________________________________________
PACKAGE CONTENTS
____________________________________________________
FEATURES
__________________________________________
SPECIFICATIONS
_______________________________________
Part Number
Frequency
Max Output Power
Noise Figure
801247
824-894 MHz / 1850-1990 MHz
55 dB
2.5 watts
+9.5 dBm
Home/Office Installation with
Multiple Antenna Mounting Options
3.5 dB nominal
Flatness
±5 dB
Isolation
> 90 dB
120-240V AC, 50-60 Hz,
8W
Connectors
TNC Female / F-Female
Dimensions
6.2 x 4.2 x 1.5 (inch)
15.7 x 10.7 x 3.8 (cm)
0.64 lbs / 0.29 kg
www.wilsonelectronics.com
Area Needing
Increased
Signal
SignalBoost™ DT
Option C
Option B
Option A
Wireless operation - no physical connection to cell phone or cellular data card
23
Toll Free 1-866-294-6996
A M P L I F I E R
Power
Requirements
Weight
____________________________________________________
D E S K T O P
Max RF (downlink)
INSTALLATION
D T
System Gain
Supports Multiple
Users
S I G N A L B O O S T ™
• Amplifies signals to and from cell tower
• Up to 10 times more power than your cell phone
• Wireless operation
• Works with Cellular and PCS frequencies
• Supports multiple phones/data cards
• 20’+30’ RG-6 cable for custom installation
• Plug-and-play kit
• Attractive, sleek design
• Automatic oscillation/overload protection
• FCC and IC type accepted
MULTIPLE
PLUG AND PLAY KIT COMPONENTS
=
MOBILE WIRELESS
____________________________________
+
801201
Wilson has taken its most popular signal booster, the DualBand Mobile Wireless, and combined it with several other
top-selling components to create three rugged, highperformance kits.
301127
801201
• The 801201 features Wilson’s new Low Profile interior
vehicle antenna and is designed for users who want to
choose their own outside antenna.
=
801212
+
301103
+
801201
=
811210
=
+
301113
=
811214
301127
SIGNALBOOST™
____________________________________
+
811210
811211
• For plug-and-play convenience, the 801212 includes
the Low Profile interior antenna along with Wilson’s
best-selling 12-inch Magnet-Mount exterior antenna,
an ideal combination for passenger cars, vans and
light trucks.
301143
+
www.wilsonelectronics.com
• The 811210 is Wilson’s basic SignalBoost™ kit and is designed for users who prefer to select their own outside
antenna.
+
811210
301103
Wilson’s affordable SignalBoost™ amplifier is the perfect
choice for the user looking to improve cellular signals for
a single cell phone or data card on the road or indoors.
Wilson’s new Ultra-Slim Antenna, included with all kits,
attaches to any phone or data card – no equipmentspecific adapter is required.
• Wilson’s compact Mini Magnet-Mount Antenna is
included with the 811211. It attaches quickly and easily
to a vehicle roof or to the optional window-mount
bracket for building use.
301143
• For a hands-free mobile application, the 811214
features Wilson’s new Cradle Plus. Acting as a signal
coupler, the Cradle Plus transfers the signal between
the phone and the amplifier and is compatible with
any hands-free device. For added versatility, the
811214 also includes the Ultra-Slim Antenna to facilitate
the standard SignalBoost™ installation.
+
811210
301143
24
301146
NOTE: 811710 & 811910 can also be put into kits upon request.
Toll Free 1-866-294-6996
SOLUTIONS
PLUG AND PLAY KIT COMPONENTS
=
801230
=
+
301125
=
801241
• The 801230 features the Mini-Mobile signal booster and
Wilson’s new Ultra-Slim interior antenna. Users can choose
their own exterior antenna.
• The 801232 is a complete, plug-and-play kit with a MagnetMount exterior antenna and Wilson’s new Ultra-Slim interior
antenna.
301149
SIGNALBOOST™ MOBILE PROFESSIONAL
____________________________________
Unique to the industry, the SignalBoost™ Mobile Professional is
an affordable, compact and portable signal booster system
designed to improve cell phone and data card performance
for people on the go. The slim booster unit incorporates a built-in
interior antenna and packs up to three times the power of a typical cell phone. For added versatility, it can be powered through
a computer USB port, a vehicle cigarette lighter or a standard
AC wall outlet. Four plug-and-play kits are available.
801240
+
301126
=
• The 801241 includes everything needed for improved cellular
performance on the road and indoors. The package includes
the booster itself, along with Wilson’s popular 12-inch magnetmount antenna, a suction-cup window bracket, all power
options, and a convenient carrying case.
801240
• For users desiring a lower profile antenna, the 801242 includes
everything from the 801241 kit, but the 12-inch magnet-mount
antenna is replaced with our four-inch mini magnet-mount
antenna.
+
301125
=
801244
301149
+
=
801243
Wilson introduced the sleek new Mini-Mobile Signal Booster in
2008. With up to six times more power than a typical cell phone,
the Mini-Mobile is available in four configurations.
+
801230
301125
801242
____________________________________
+
801230
801232
SIGNALBOOST™ MINI-MOBILE
• The 801243 is designed for on-the-road use. It includes the 12inch magnet-mount exterior antenna, but does not feature the
in-building accessories.
801240
• The 801244 is identical to the 801243, except that it features
the five-inch mini magnet-mount exterior antenna, rather than
the 12-inch version.
+
301126
801240
www.wilsonelectronics.com
25
Toll Free 1-866-294-6996
BUILDING
SMALL AREA OR
DESKTOP SOLUTIONS
www.wilsonelectronics.com
26
Toll Free 1-866-294-6996
SOLUTIONS
LARGE AREA OR
MULTIPLE ROOM SOLUTIONS
MEDIUM AREA OR
SINGLE ROOM SOLUTIONS
www.wilsonelectronics.com
27
Toll Free 1-866-294-6996
Say Goodbye to Dropped Calls
Trucker Antennas
Rugged, High-Gain Trucker Antennas
Deliver “Big-Rig” Performance
_______________________________________
www.wilsonelectronics.com
Weatherproof and waterproof
Built-in spring reduces impact damage
28
301130 Marine Antenna
301133 RV / Trucker Spring-Mount Antenna
301119 RV / Trucker Roof-Mount Antenna
19-inch fiberglass mast raises antenna above obstructions
5/8-inch x 7-inch threaded mounting rod spans the distance between roof and headliner
Professional drivers demand top performance
from their equipment, and Wilson provides
just that with its line of trucker antennas.
Available in three models for alternative
installations. These antennas offer the
highest allowable gain, dual-band versatility
(800/1900 MHz), and omnidirectional design.
Engineered specifically for trucks and RVs,
these popular antennas can also be used for
fixed installation on buildings.
301101 / 301701 Trucker Mirror-Mount Antenna
301101 / 301701 / 301119 / 301130 / 301133
A N T E N N A S
T R U C K E R
Wilson Electronics
Toll Free 1-866-294-6996
FEATURES
_______________________________________
• Mobile, marine and building use
• No ground plane required
Built-in ground plane allows for use on any surface metal, fiberglass, wood, etc.
• 19-inch fiberglass mast raises antenna above
obstructions (301101)
• Mounting options available for any application
301101 / 301701 / 301119 / 301130 / 301133
800/1900 • 900/1800 MHz
Radiation Patterns
H - Plane @ 850 MHz
H - Plane @ 1920 MHz
SPECIFICATIONS
______________________________________________________________________________________________
SEE PICTURE ON PAGE 28
Part Number
Frequency
Range
301101
301701
SEE PICTURE ON PAGE 28
SEE PICTURE ON PAGE 28
SEE PICTURE ON PAGE 28
301119
301133
301130
800/1900 MHz 900/1800 MHz
806-894 MHz / 1850-1990 MHz
Impedance
50 ohms
Antenna Gain
5.12 dBi 806-894 MHz / 6.12 dBi 1850-1990 MHz
Radiation
Omni
Polarization
Vertical
Ground Plane
Built-In Ground Plane
Connector
Material
Coax Cable
Mount
Whip - Stainless Steel / Extension
- Fiberglass
Whip - Stainless Steel
Whip - Stainless Steel / Casing
- Fiberglass
RG58 - 10.5 feet / 3.2 meters
RG58 - 13.5 feet / 4.115 meters
RG58 - 7 inches
32.0625 inches / 81.45 cm
Standard CB 3/8-inch x 24 Thread
(24 inches including threaded mount)
18 inches
21.5 inches including spring mount
/ 54.61 cm
5/8-inch x 7-inch Threaded
Mounting Rod
3-Way Mount with Spade Stud
Wilson Part# 901104
21 inches / 53.3 cm
(including coupler)
Standard 1-inch x 14 thread
T R U C K E R
Height
FME Female
A N T E N N A S
www.wilsonelectronics.com
29
Toll Free 1-866-294-6996
Wilson Electronics
Say Goodbye to Dropped Calls
General Vehicular External Antennas
Stay Connected on the Road
With Wilson’s Mobile Antennas
G E N E R A L
FEATURES
___________________________________
• Mobile, marine and building use
• Perfect for cars, vans and light trucks
301113 • 301126 • 301131 • 301132
Mini Magnet-Mount Antennas
Removable - transfers from one vehicle to another
Designed specifically for use with our
mobile amplifiers, Wilson’s wide range
of vehicle antennas offers top-flight
performance and multiple mounting
options. Our best-selling magnet-mount
antennas install in seconds and are
transferable between vehicles. For a more
permanent installation, users can choose
from glass- or NMO-mount options.
301103 • 301125 • 301128 • 301703 • 304202
Magnet-Mount Antenna
Removable - transfers from one vehicle to another
V E H I C U L A R
E X T E R N A L
A N T E N N A S
___________________________________
Magnet Mount Antennas
Part Number
Frequency
Range (MHz)
301103
301125
806-894 / 896-940 / 1850-1990
Impedance
Antenna Gain
(MHz)
FME Female
304202
900/1800
800/900/1900
301113
301126
301131
WHITE
301132
WHITE
806-894 / 900 / 1800 / 1850-1990
50 ohms
5.12 dBi 806-894 / 6.12 dBi 1850-1990
2.12 dBi 806-894 / 1.5 900 MHz
3.12 dBi 1850-1990 / 3.12 1800 MHz
Omni
Omni
Vertical
Vertical
Metal ground plane required
Metal ground plane required
Polarization
Ground Plane
301703
50 ohms
Radiation
Connector
301128
Mini Magnet-Mount Antennas
SMA Male
Material
TNC Male
FME Female
FME Female
FME
SMA Male FME Male
Female
N Male
Whip - Stainless Steel
Whip - Plastic Coated Steel Wire
RG174 - 10 feet / 3.05 meters
RG174 - 10 feet / 3.05 meters
Height
12.25 inches / 31.12 centimeters
4.175 inches / 10.60 centimeters
Mount
Rare earth magnet
Rare earth magnet
Coax Cable
www.wilsonelectronics.com
30
Toll Free 1-866-294-6996
301112 NMO Trucker Antenna
Same styling as our popular trucker antenna for NMO mounting
NMO Trucker
Antennas
Glass-Mount & Mini Glass-Mount Antennas
301114
304201
806-894 MHz
1850-1990 MHz
806-894 MHz
1850-1990 MHz
806-866 MHz / 896-939 MHz
1850-1990 MHz
301112
301104
806-894 MHz / 1850-1990 MHz
50 ohms
3.5 dBi 806-894 MHz
4.8 dBi 1850-1990 MHz
Whip - Stainless Steel
1.4 dBi 806-894 MHz
2.4 dBi 1850-1990 MHz
Omni
Vertical
Vertical
Built-In Ground Plane
Metal ground plane required
FME Female
FME Female
5.375 (inch)
13.65 (cm)
Whip - Stainless Steel
15 (inch)
38.10 (cm)
Glass mounting with
3M™ adhesive
www.wilsonelectronics.com
800 MHz900 MHz
4.9 dBi 806-894 MHz /
5.9 dBi 1850-1990 MHz
Omni
Whip - Plastic Coated Steel
Wire
301105
50 ohms
3.5 dBi 806-939 MHz 896-939
MHz
4.5 dBi 1850-1990 MHz
RG58 - 14 feet
4.27 meters
15 (inch)
38.10 (cm)
304203
Whip - Stainless Steel
sold separately
sold separately
13.25 inches / 33.7 cm
13.88 inches / 35.3 cm
NMO Mount Types
(see NMO mount options on page 37)
31
Toll Free 1-866-294-6996
A N T E N N A S
301102
NMO Antennas
E X T E R N A L
301102 • 301114 • 304201
Glass-Mount & Mini Glass-Mount Antennas
Permanent installation
V E H I C U L A R
Not To Scale
G E N E R A L
Not To Scale
800/900 MHz • 800/900/1800/1900 MHz
301106 / 301127 / 301143 / 301149 / 301208
800/1900 MHz • 900/1800 MHz
900/2100 MHz
Wilson Electronics
Say Goodbye to Dropped Calls
Low Profile & Ultra-Slim Antennas
FEATURES
Radiation Patterns
Omni-directional when
mounted vertically
________________________________________
H - Plane @ 850 MHz
H - Plane @ 1920 MHz
• Low profile for discreet installation
• Multiple Uses
Interior mounting as an external antenna in vehicles
Interior antenna when used with Building amp
• Includes 3M™ adhesive for mounting to glass
(do not mount on metal)
301106
301127
301208
A N D
U L T R A - S L I M
N
ew
&
A N T E N N A S
Im
pr
ov
ed
301143
301149
Part Number
Frequency
301127
Antenna Gain
301143
806-894 MHz / 1850-1990 MHz
Impedance
2.2 dBi 806-894 MHz
3.2 dBi 1850-1990 MHz
Omni when mounted vertically
Polarization
Vertical
Connector
Length
301149
301208
806-960 MHz / 1700-2300 MHz
806-939 MHz
1850-1990 MHz
3 dBi (800 MHz)
2 dBi (1900 MHz)
1 dBi (800 MHz) 15dB f/b
2 dBi (1900 MHz) 7dB f/b
50 ohms
Radiation
Coax Cable
FME Female
RG58 - 14 feet / 4.27
meters
FME Female
RG174 - 14 feet / 4.27
meters
5 in. / 12.7 cm.
Width
Building Mount
120º H Plane
SMA Male
FME Female
RG174 - 7.5 feet
2.29 meters
RG174 - 5 feet
1.524 meters
3.25 in. / 8.26 cm.
5.13 in. / 13 cm.
1.5 inches / 3.8 cm
1.56 in. / 4 cm.
Minimum 6 inches away from metal
L O W
P R O F I L E
301106
(Building only)
www.wilsonelectronics.com
32
Toll Free 1-866-294-6996
Say Goodbye to Dropped Calls
Cradle Plus Antennas
301146 / 301148
800/900/1800/1900/2100 MHz
Wilson Electronics
Hands-Free Safety and Convenience
____________________________________________
Wilson’s innovative Cradle Plus features a built-in
inside antenna that works with Wilson SIGNALBOOST™
amplifiers. When placed in the Cradle Plus, a cell
phone benefits from the maximum possible signal
improvement from the booster system, due to the
proximity of the built-in antenna.
FEATURES
____________________________________________
Radiation Patterns
H - Plane @ 850 MHz
H - Plane @ 1920 MHz
• Compatible with all cell phones
• Increases driver safety
• Supports any hands-free device, including ear-buds
and Bluetooth® products
• Adjustable to fit any size cell phone
• Multiple mounting options: console, dashboard or
windshield
• Installs in minutes
SPECIFICATIONS
____________________________________________
Part Number
Frequency Range
Impedance
301148
806-960 MHz / 1700-2100 MHz
50 ohms
FME Female
SMA Male
RG 174 - 7.5 feet
Length
4.125 in / 10.5 cm
Width
2.875-4.5 in / 7.3-11.4 cm
P L U S
Coax Cable
C R A D L E
Connector
301146
A N T E N N A S
www.wilsonelectronics.com
33
Toll Free 1-866-294-6996
Say Goodbye to Dropped Calls
Yagi Antennas
Durable, high-gain, directional antennas
A G I
A N T E N N A S
800 • 800/900 • 900 MHz
1900 MHz
Wilson Electronics
301111 Yagi
30Y
Our highest gain antenna for
the 800 MHz band
301129 Yagi 800 MHz
301142 Yagi 900 MHz
Lower profile, lighter
alternatives for 800 and 900 MHz
301124 Yagi
Our highest gain antenna for
the 1900 MHz band
304411
Wide Band
Directional Antenna
SPECIFICATIONS
______________________________________________________________________________________________
Part Number
301111 / 301129 / 301142 / 301124 / 304411
Number of Elements
301111
301129
8
301142
301124
5
304411
9
9
1850-1990 MHz
800-2500 MHz*
*700-2500 MHz coming soon
Frequency
806-900 MHz
Impedance
50 ohms
50 ohms
50 ohms
50 ohms
13 dBi
10 dBi
14 dBi
8.0-10.5 dBi
50 watts
10 watts
25 watts
100 watts
Antenna Gain
Max Power
800-900 MHz
Radiation
Polarization
Connector
N Female
880-965 MHz
Directional
Directional
Vertical
Vertical
N Female
Material
Length
Weight
N Female
N Female
16.8 inches /
43 centimeters (with mount)
11.42 inches /
29 centimeters
3.0 ounces / 0.086 kg
(with mount)
3.31 lbs
1.5 Kg
Aluminum
32.5 inches /
82.6 centimeters
14.4 inches /
37 centimeters (with mount)
2.9 ounces / 0.081 kg (with mount)
Mount
Wind Surface Area
Mounts on pipe with 0.5 inch to 1.5 inch diameter
<100 cm2
Brackets
www.wilsonelectronics.com
<120 cm2
<465 cm2
Max OD 2 inches
34
Toll Free 1-866-294-6996
Say Goodbye to Dropped Calls
Building Antennas
Radiation Patterns
FEATURES
Omni-directional when
mounted vertically
________________________________________
H - Plane @ 850 MHz
H - Plane @ 1920 MHz
• Built-in ground plane
• Mounting hardware included
• For fixed installations
301121
301151
301134 (includes suction cups)
301135
301155 (75 ohm)
301157 (weatherproof)
301123
Interior Antennas
301141
301201
301202
301121 / 301151 / 301123 / 301134 / 301135 / 301155 / 301141 / 301201 / 301202
800/1900 • 800/900 MHz
800/2100 MHz
Wilson Electronics
Exterior Antennas
SPECIFICATIONS
______________________________________________________________________________________________
Part Number
301121
301151
301123
301134
(includes
suction cups)
301157
301155
(weather proof)
(75 ohm)
301141
301201
301202
301135
Frequency
Impedance
800-910 MHz
1800-1990 MHz
50 ohms
75 ohms
800-910 MHz
50 ohms
800-960 MHz
1710-2500 MHz
50 ohms
75 ohms
806-894 MHz
1850-1990 MHz
75 ohms
806-894 MHz
1850-1990 MHz
75 ohms
50 ohms
Vertical
Horizontal and
Vertical
Vertical
Vertical
Vertical
Antenna
Gain
2.5 dBi
5.2 dBi
7 dBi / 10 dBi
5 dBi / 7 dBi
5.12 dBi / 6.12 dBi
15 watts
25 watts
Max Power
Beamwidth
Hor. Plane
Beamwidth
Ver. Plane
VSWR
Dimensions
Ground
Plane
Front to
Back Ratio
360°
360°
70°
100°
360°
120°
120°
50°/45°
100°
60°
1.5:1
1.5:1
1.5:1
2.0:1 (800)
1.8:1 (1900)
1.8:1
N-Female
F-Female
Diameter 8 inches /
20.32 cm
N-Female
Diameter 7.72
inches / 19.6 cm
N-Female
F-Female
8.27 x 7.09 x 1.73 inches
21 x 18 x 4.39 cm
Built-In Ground Plane
20/15 dB
typical
N/A
www.wilsonelectronics.com
35
F-Female
F-Female
FME-Female
7.75 x 4.38 x 2.63 inches
19.7 x 11.1 x 6.7 cm
18 inches
None Required
Built-In Ground Plane
11/14 dB
typical
N/A
Toll Free 1-866-294-6996
A N T E N N A S
Connector
50 watts
B U I L D I N G
Polarization
Wilson Electronics
Say Goodbye to Dropped Calls
A N T E N N A
A D A P T E R
T Y P E
D E S C R I P T I O N S
Antenna Adapter Type Descriptions
Back Plug
Plugs into the adapter port on the upper
back portion of the phone. A rubber or
plastic plug may need to be removed.
Press firmly to ensure a good connection do not twist. Using too much force could
damage the phone.
Top Screw
This antenna adapter replaces the cellular
phone's original antenna. Unscrew the
original antenna and screw in the antenna
adapter. Be sure to save the original
antenna - it will be needed after
disconnecting the antenna adapter.
Top Plug
Plugs into the adapter port on the top of
the phone. A rubber plug may need to be
removed. Press firmly to ensure a good
connection - do not twist. Using too much
force could damage the phone.
Side Plug
Plugs into the adapter port on the
upper-side of the phone. A rubber plug
may need to be removed. Press firmly to
ensure a good connection - do not twist.
Using too much force could damage the
phone.
Bottom Plug
Plugs into the bottom of the cell phone.
Push until there is a click. Press button(s)
in middle or on sides to release connector
from the phone. Note: an RF charger may
be available for the phone - it will allow
charging of the phone while using the
external antenna.
Top Ring with Plug
Slide onto the base of the cellular phone's
built-in antenna while aligning the plug with
the adapter port. Press down firmly to
ensure a good connection.
Cellular Data Cards
Adapter plugs into the adapter port on the
end of the cellular data card or plugs in as
an antenna replacement. Check the model
for a specific adapter type.
Back Replacement
Remove the rubber Nextel cover. Remove
the 2 screws using the included Torx T8 bit.
Attach the new adapter plate using the
provided Phillips screws. Tighten left
screw then the right. When the adapter is
pushed into the back of the phone it should
snap into place.
Ring
Slides onto the base of the cellular phone's
built in antenna. Press down firmly to
ensure a good connection. Be sure to
lower the phone's built-in antenna.
Back Plate
Place included VELCRO® on back top of
phone as shown. Attach adapter to
VELCRO®.
Note: Also works with cellular data cards.
Sleeve
Snaps onto the back of the cellular phone.
The sleeve must be mounted to the top of
the phone. The sleeve may fit upside
down but it will not function properly.
Top Replacement Antenna
(1) Pry off plastic cap. Depress plastic tab
inside hole while forcefully pulling out the
original antenna. (2) Insert adapter plug into
phone with wires facing phone. (4) Screw
adapter into top of phone. (3) This
replacement antenna is needed after
disconnecting the antenna adapter.
Back Plug with Replacement Antenna
(1&2) Unscrew the original antenna that is
blocking the adapter port - may have
reversed threads. (3) Screw the included
replacement antenna into the top of the
phone. The antenna adapter will now fit
into the back of the phone - see above for
Back Plug instructions.
TECH SUPPORT
1) Call Toll-Free 866-294-1660
2) E-mail tech@wilsonelectronics.com
3) Visit www.wilsonelectronics.com
Printer Adapter
Guide Available
For more details and the latest information regarding adapters visit www.wilsonelectronics.com
www.wilsonelectronics.com
36
Toll Free 1-866-294-6996
Wilson Electronics
Say Goodbye to Dropped Calls
Mounts & Replacement Parts
901103 3/8-inch NMO Mount
Requires NMO Antenna (sold separately)
Requires 3/8-inch hole in sheet metal
surface for connection
14 feet RG-58U Cable
FME-Female Connector
901123 In-Wall Panel Antenna Mount
Compatible with the Wilson Panel Antenna
(301135, 301155).
Bracket can be inserted into an interior wall.
Features a paintable cover.
901119 Marine Antenna Mount
For use with the Marine Antenna to mount
on various surfaces
Features standard 1 inch x 14 threaded
mount
301147 Panel Antenna Upgrade Kit for the
Desktop Amplifier (801247)
Includes Panel Antenna, 20’ white RG6 coax
cable, N-male to F-female & F-female to
TNC-male connectors.
901104 3-Way Mount with Spade Stud
Compatible with Wilson Cellular Trucker
Antennas (301101) and (301133)
3/8-24 thread
5 millimeter chrome-plated aluminum
Hardware included
901130 Cup Holder Car Mount for use with
Wilson MobilePro, Cradles & Cradle
Amplifiers
901106 Horizontal Mount with Spade Stud
Compatible with Wilson Trucker Antennas
(301101) and (301133)
3/8-24 thread
5 millimeter chrome-plated aluminum
Hardware included
901131 Low Profile Adjustable Suction Cup
Car or Table Mount for use with Wilson
MobilePro, Cradles & Cradle Amplifiers
901128 Window-Mount Antenna Bracket
For use with Magnet-Mount and Mini
Magnet-Mount Antennas
Suction cups attach to inside surface of
window; antenna mounts on horizontal
platform
901132 Adjustable Suction Cup Car or Table
Mount for use with Wilson MobilePro,
Cradles & Cradle Amplifiers
859931 Ground Plane
For use with Magnet-Mount and Mini
Magnet-Mount Antennas
White metal, 3.5 inches in diameter
901117 Antenna Pole Mounting Assembly
Includes
100183 U-Bracket assembly
100197 Wall mount bracket
100232 10” Length x 1.5” Diameter Aluminum
Tube
www.wilsonelectronics.com
37
Toll Free 1-866-294-6996
P A R T S
901125 In-Ceiling Dual-band Dome Antenna
Bracket
Compatible with the Wilson Dual-Band Dome
Antenna (301121)
Allows for mounting the dome antenna in the
attic.
R E P L A C E M E N T
901102 3/4-inch NMO Mount
Requires NMO Antenna (sold separately)
Requires ¾-inch hole in sheet metal surface
for connection
14 feet RG-58U Cable
FME-Female Connector
&
901124 Omni Antenna Building Mounting
Bracket
Allows for easy mounting of the Omnidirectional Antenna (301201, 301202) on the
outside of a building.
Includes hardware for mounting on a pole,
fascia, roof, wall, etc.
M O U N T S
901101 NMO TRUNK MOUNT
Requires NMO Antenna (sold separately)
14 feet RG-58U Cable
FME-Female Connector
Attaches on the lip of a trunk lid or similar
surface
Wilson Electronics
TAPS
-6 dB Tap
800-900 MHz
859906
SPLITTER
-3 dB Splitter
800-900 MHz
859901
-10 dB Tap
800-900 MHz
859907
When to use taps
For use in signal distribution systems to split the amplified
signal with minimum signal loss. Equal amounts of signal sent
to two antennas for similarly sized areas. Weatherproof case
for indoor or outdoor use.
-.5 dB
-70 dB
-71.5 dB
-6 dB
TAP
-10 dB
TAP
-3 dB
-72 dB
-72 dB
-10 dB
-6 dB
-3 dB Splitter
700-2300 MHz
859957
859959 (75ohm)
When to use splitters
For use in signal distribution systems to split the amplified
signal for multiple inside antennas with minimum signal loss or
for controlling the amount of signal in small versus large areas.
Features low-loss signal throughput with one -6 dB or -10 dB
tap. Weatherproof case for indoor or outdoor use.
-1.5 dB
-3 dB Splitter
1900 MHz
859928
-3 dB
SPLITTER
-75 dB
-3 dB
-81.5 dB
-75 dB
-76 dB
LIGHTNING PROTECTION
COMBINER/DIPLEXER
Lightning Surge
Protector
859902
Dual-Band
Combiner/Diplexer
859922
T A P S
•
S P L I T T E R S
•
L I G H T N I N G
P R O T E C T I O N
•
C O M B I N E R / D I P L E X E R
Say Goodbye to Dropped Calls
• N-Female Connectors
• Weatherproof
• Attenuation less than 0.2 dB
• Frequency range up to 3 GHz
• Replaceable gas discharge element (859920)
www.wilsonelectronics.com
• Equal amounts of signal sent to two antennas for similarly
sized areas
• Each output port loses .5 dB
• 800-900 MHz & 1850-1990 MHz bands (Cellular, iDEN & PCS)
• N-Female Connectors
• Can connect two outside antennas to one amplifier or two
amplifiers to one inside antenna
38
Toll Free 1-866-294-6996
C O N N E C T O R S
Wilson Electronics
Say Goodbye to Dropped Calls
CONNECTORS
FME
Female
FME
Female
Mini UHF
Female
971103
N Female
971104
FME Female
N Female
FME Male
971108
971107
FME Female
TNC
Female
FME Female
F Female
971121
N Male
971128
FME
Male
Mini UHF
Male
971105
FME
Male
971113
971130
TNC
Male
FME
Male
971106
N Male
F Female
FME
Male
N Female
971110
N Female
Used to connect (2) 9913 coax
with N Male adapters together
FME
Male
F Female
SMA
Male
971119
971117
TNC
Male
Mini UHF
Female
F Female
Used to connect (2) RG-6 coax
with F Male connectors together
971129
CRIMP CONNECTORS
Mini UHF Female
Crimp for RG 174 Cable
971109
971115
971118
TNC Male Crimp
for RG 58 Cable
FME Female Crimp
for RG 58 Cable
FME Female Crimp
for RG 174 Cable
971111
971114
971120
Mini UHF Male Crimp
for RG 58 Cable
N Male Crimp
for RG 58 Cable
Male SMA Crimp
for RG 58 Cable
971112
971116
971131
www.wilsonelectronics.com
39
Toll Free 1-866-294-6996
C O N N E C T O R S
FME Male Crimp
for RG 58 Cable
C R I M P
N Male Crimp
for 9913 or RG 8u Cable
C A B L E S
C O A X I A L
Wilson Electronics
Say Goodbye to Dropped Calls
Coaxial Cables
RG58 Low-Loss
Coaxial Cable
FME-Male /
FME-Female
Wilson 400 Ultra
Low-Loss Coaxial
Cable N-Male /
N-Male
951101
5-feet
951102
10-feet
951103
15-feet
951125
20-feet
white coax
952302
952310
952320
952330
952350
952375
952300
RG58 Low-Loss
Coaxial Cable
N-Male /
FME-Female
RG-174 Coaxial
Cable
FME-Female /
FME-Female
951110
951120
951104
951116
2-feet
10-feet
20-feet
Flat Coax - White
951129
8¾-inches
(75 ohm)
2-feet
10-feet
20-feet
30-feet
50-feet
75-feet
100-feet
Attenuators
859935
859936
859926
859927
6-feet
3dB
6dB
10dB
20dB
LOSS PER 10’
RG-6 Low-Loss
White Coaxial Cable
F-Male / F-Male
950602
950620
950630
950650
ACTUAL SIZE
2-feet
20-feet
30-feet
50-feet
800
MHz
1900
MHz
13/32”
Wilson
400
.45 dB
.7 dB
3/8”
RG-6
.83
1.35
3/16”
RG-58
Cable
1.0 dB
2.66 dB
3/32”
RG-174
Cable
3.58 dB
6.66 dB
Designed to help protect your signal booster
Sturdy, shock-absorbing material
Keeps components together and organized
Quick and easy access
Mobile to Mobile
Mobile to Home/Office
Bag only - all components sold separately
P O R T A B L E
C A S E
Portable Signal Booster Vented Soft
Carrying Case
www.wilsonelectronics.com
40
Part Number
859924
Dimensions
10.5 x 9.5 x 2.5 (inch)
26.67 x 24.13 x 6.35 (cm)
Toll Free 1-866-294-6996
Wilson Electronics
Say Goodbye to Dropped Calls
Power Supplies
BUILDING POWER SUPPLIES
811101 811201 811210 811211 811214 811215
812201 801101 811701 811901 811710 811910
859940
Home/Office Accessory Kit
AC/DC 12 V Power Supply
Converts 120/240 V AC to 12 V DC
Window Mount Antenna Bracket
811101 811201 811210 811211 811214 811215
812201 801101 811701 811901 811710 811910
859912
AC/DC 6 V Power Supply
Converts 120/240 V AC to 6 V DC
801105 801106 801201 801212 801213 801215
801306 801506 801606 804005 804006 801247
801230 801231 801232 801233 801245 801262
859953
AC/DC 5V USB Power Supply
(USB cable not included)
801240 801241 801242 801243 801244
859962
6’ USB cable for Power Supply
801240 801241 801242 801243 801244
859913
DC/DC 6 V Power Supply
Converts 12 V DC to 6 V DC
801105 801106 801201 801212 801213 801215
801245 801306 801506 801606 804005 804006
801230 801231 801232 801233
859904
DC 12 V
Power Supply
811101 811201 811210 811211 811214 811215
812201 801101 811701 811901 811710 811910
859905
DC 12 V Hardwire Kit
Power Supply
811101 811201 811210 811211 811214 811215
812201 801101 811701 811901 811710 811910
859923
DC/DC 6 V Hardwire Kit
Power Supply
Converts 12 V DC to 6 V DC
801105 801106 801201 801212 801213 801215
801306 801506 801606 804005 804006
859939
DC 12 V Hardwire Kit
Power Supply
(iDEN High-Power Amplifier)
814021
859945
DC/DC 6 V
Power Supply
801230 801231 801232 801233
859961
6V CLA Power Supply
805200 805205
859949
CLA USB 5V Power Supply
(USB cable not included)
801240 801241 801242 801243 801244
859963
CLA Power Supply with 3’ USB
Cable for C-Booster and U-Booster
Cradle Amplifier
805206 805221
VEHICLE POWER SUPPLIES
www.wilsonelectronics.com
41
Toll Free 1-866-294-6996
S U P P L I E S
AC/DC 12 V Power Supply
Converts 120/240 V AC to 12 V DC
P O W E R
859903
Wilson Electronics Product Catalog
3301 East Deseret Drive, St. George, Utah 84790
Sales: 866-294-6996 Local: 435-673-5021
Fax: 435-656-2432
Tech Support: 866-294-1660
tech@wilsonelectronics.com
info@wilsonelectronics.com
www.wilsonelectronics.com
2010
03-10 • PART 772208