Affordable Networked AV
text
PRODUCT CATALOG
2013 Installed AV
Attero Tech, LLC
1315 Directors Row
Fort Wayne, IN 46808
(260) 496-9668
www.atterotech.com
Issued February 2013
Dante
Attero Tech unD32 32-Channel Breakout Interface
The unD32 32 Channel Dante Break Out Interface (BoB) is a 32 Channel, 1RU Dante break out interface
for all types of commercial AV installations. Applications from stadia to convention centers to houses of
worship will find immediate use for this cost-effective and high density Dante endpoint solution. Audio
quality is paramount in the design of the D32. Each of the 32 analog outputs on the D32 may be
assigned to any Dante flow in the system, either by means of the front panel controls or using
Audinate’s Dante Controller Windows or OSX application. A 16x2 display shows flow names and signal
levels for each of the 32 analog output channels. In addition, each output level is individually
controllable over a 60dB range plus mute. The D32 features both primary and secondary Gigabit Dante
network connections for full redundancy, as well as a third “local” Gigabit port. This port gives network
access to other equipment in the rack (e.g. amplifier controllers, control devices, etc.) without
the need for a separate Ethernet switch.
Part Number: 900-00XXX-01
Available Q2 2013
text
Attero Tech unDIO2x2 2in/2out I/O Interface
The unDIO2x2 I/O Interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of
Dante audio to an existing Dante-based networked audio system. The DIO2x2’s small form factor and
PoE power capability make it easy to put Dante connectivity wherever it’s needed - near the audio
source or sink, thereby eliminating costly and interference prone analog wiring.
Part Number: 900-00XX-01
Available in Q2 2013
Affordable Networked AV
All Attero Tech products are proudly
made in the USA, right here in Indiana
CobraNet
OUTBOXES
COOLBOXES
ACCESSORIES
Attero Tech InBox M3
The InBox M3 CobraNet Audio Interface is a cost effective multi-input wall
box. The M3 features a balanced XLR input, a pair of RCA inputs, and a
stereo minijack input. All five inputs can be used simultaneously and all
audio channels are available separately. The M3 is designed to fit into most
US dual gang junction boxes and is PoE enabled, so all connectivity (power
and data) is provided by a single CAT-5 cable.
Part Number: 900-00127-01 White finish, white Decora plate included
Part Number: 900-00127-02 Black finish, black Decora plate included
Attero Tech InBox X2
The InBox X2 CobraNet Audio Input Interface is a cost effective two input,
mic/line level wall box. The X2 features switchable mic/line gain,
Switchable +12 V phantom power, and clipping indicators for each channel.
The X2 is designed to fit into most dual gang junction boxes and is PoE
enabled, so all connectivity (both power and audio data) to the X2 is
provided by a single CAT-5 cable.
Part Number: 900-00106-03 White finish, white Decora plate included
Part Number: 900-00106-05 Black finish, black Decora plate included
text
Attero Tech InBox R8
The InBox R8 CobraNet Audio Input Interface is a cost effective eight input,
line level wall box. The R8 features eight unbalanced RCA inputs, which can
be used as either eight mono inputs or four stereo inputs. The R8 is
designed to fit into most dual gang junction boxes and is PoE enabled, so
all connectivity (both power and audio data) to the R8 is provided by a
single CAT-5 cable.
Part Number: 900-00108-02 White finish, white Decora plate included
Part Number: 900-00108-04 Black finish, black Decora plate included
A f f o r d a b l e Ne t w o r k e d A V
All Attero Tech products are proudly
made in the USA, right here in Indiana
CobraNet
INBOXES
OUTBOXES
COOLBOXES
ACCESSORIES
Attero Tech OutBox X2
The OutBox X2 CobraNet Audio Output Interface is a cost effective two
output line level wall box. The X2 features two balanced outputs. The X2 is
designed to fit into most dual gang junction boxes and is PoE enabled, so
all connectivity (both power and audio data) to the X2 is provided by a
single CAT-5 cable.
Part Number: 900-00107-02 White finish, white Decora plate included
Part Number: 900-00107-04 Black finish, black Decora plate included
Attero Tech OutBox R8
The OutBox R8 CobraNet Audio Output Interface is a cost effective eight
output, line level wall box. The R8 features eight unbalanced RCA outputs,
which can be used as either eight mono outputs or four stereo outputs.
The R8 is designed to fit into most dual gang junction boxes and is PoE
enabled, so all connectivity (both
power and audio data) to the R8 is provided by a single CAT-5 cable.
Part Number: 900-00109-02 White finish, white Decora plate included
Part Number: 900-00109-04 Black finish, black Decora plate included
text
A f f o r d a b l e Ne t w o r k e d A V
All Attero Tech products are proudly
made in the USA, right here in Indiana
CobraNet
INBOXES
OUTBOXES
COOLBOXES
ACCESSORIES
Attero Tech GearBox 18/6
The GearBox 18/6 CobraNet Networked Automixer is a highly integrated 18 input, 6 output digital
automixer with DSP. The GearBox includes a fully managed 8-port PoE enabled Fast Ethernet switch
with a Gigabit Ethernet expansion port. In addition, a WAN port is included for both third party system
control and remote system access. The GearBox functionality and cost are optimized for small venues
that benefit from the advantages of a networked audio system. The GearBox accepts up to 16
networked digital inputs from any CobraNet input source (e.g. Attero Tech InBox units), and has 2
legacy mic/line analog inputs. Two legacy analog outputs complement 4 networked digital outputs, with
a full 18x6 matrix mixer between inputs and outputs. In-room remote control is provided by the RV-1
Remote Volume Control and the RC-4 Room Combining Controller. Both the RV-1 and RC-4 are single
gang Decora style wall plate controls powered by the GearBox. See the ACCESSORIES page for more
information on the RC-4 and RV-1 Remote Controls.
Part Number: 900-00151-01
Attero Tech DialogBox 4/2
text
The DialogBox 4/2 CobraNet Audio Interface is a cost effective
4-in / 2-out mic/line automixer. The DialogBox 4/2 features four
balanced inputs, with both gain and +24V phantom power selectable
via software on a per channel basis, and two line level balanced
outputs. All outputs can contain any mix of local and network audio
inputs. Logic inputs provide the capability to selectively mute
various combinations of DialogBox 4/2 inputs and outputs. The
DialogBox 4/2 uses a gain sharing automix algorithm for seamless
and robust automixing. The DialogBox 4/2 can be powered from
either standard PoE or +12VDC.
Part Number: 900-00155-01
Attero Tech SquawkBox
The SquawkBox CobraNet Audio Interface is a cost effective desktop
audio product designed to allow a user to easily monitor multiple
channels of audio on a CobraNet based AV system. Up to 16 channels
can be monitored using either the internal speaker or with
headphones. A 17th “override” channel can be initiated externally for
system wide announcements. The SquawkBox can be powered by
either PoE or by a DC adapter.
Part Number: 900-00141-01
A f f o r d a b l e Ne t w o r k e d A V
All Attero Tech products are proudly
made in the USA, right here in Indiana
CobraNet
INBOXES
OUTBOXES
COOLBOXES
ACCESSORIES
Attero Tech VoiceBox 4I/OP
The VoiceBox 4 I/OP CobraNet Audio Interface is a cost effective 4
in/4 out mic/line preamp. The VoiceBox 4I/OP features 4 balanced
inputs, with both gain and +12V phantom power selectable on a per
channel basis, and 4 line level balanced outputs. All outputs can
contain any mix of local and network audio inputs. An RS-232 Serial
Bridge port enables the transmission of serial data From any
VoiceBox 4 I/OP to any other CobraNet device supporting a serial
bridge connection on a CobraNet system. The VoiceBox 4I/OP can be
powered from either standard PoE or +12VDC.
Part Number: 900-00138-01
Attero Tech BoomBox NA4
The BoomBox NA4 CobraNet Audio Interface is a cost effective fourchannel networked power amplifier for paging and background
music applications. Each channel can amplify either of two received
CobraNet audio streams. Each channel has its own volume control,
and both signal routing and volume are controllable over the
network. The BoomBox can be powered by either PoE, PoE+, or by a
+12VDC to +24VDC external power supply
Part Number: 900-00142-01
text
Attero Tech MatchBox USB
Multi-media PCs are becoming more important as media sources,
not only in home settings, but in a variety of commercial audio
installation settings as well. The MatchBox USB is a cost-effective
general purpose solution for direct integration of media PC audio
streams into and/or back from a CobraNet-based system. The
MatchBox USB appears to the PC as a USB Sound Card and can be
configured for 8 channels of audio in various input and output
modes.
Part Number: 900-00110-02 for 4x2 version
Part Number: 900-00110-03 for 1x8 version
Affordable Networked AV
All Attero Tech products are proudly
made in the USA, right here in Indiana
CobraNet
INBOXES
OUTBOXES
COOLBOXES
ACCESSORIES
Attero Tech RC-4 Room Combining Remote
(GearBox 18/6 Accessory)
The RC-4 provides a simple user interface for combining up to 4
divisible rooms in any possible configuration. Multiple RC-4s may be
used in a venue, and all will automatically synchronize with one
another.
Rear panel AtteroNet In and Out RJ-45 connections deliver both
power and control data. Remote units can be daisy-chained to one
another for ease of installation. All remotes are connected to the
GearBox and to one another by standard CAT-5 cable, fit into a
standard single gang wall box, and use a Decora cover plate.
RC-4 Part Number: 900-00150-01
Attero Tech RV-1 Volume Control Remote
(GearBox 18/6 Accessory)
The RV-1 allows user volume adjustment in 1dB steps, between 0dB
and -26dB, plus Mute. Multiple RV-1s may control volume in any
venue, and will automatically synchronize with one another. RV-1s
automatically control the room (or rooms) in which they are located,
automatically responding to changes in room configuration.
Rear panel AtteroNet In and Out RJ-45 connections deliver both
power and control data. Remote units can be daisy-chained to one
another for ease of installation. All remotes are connected
to the
text
GearBox and to one another by standard CAT-5 cable, fit into a
standard single gang wall box, and use a Decora cover plate.
RV-1 Part Number: 900-00149-01
Other Accessories
12VDC SMPS 12VDC External Wall Plug Power Supply
For: VoiceBox 4I/OP, BoomBox NA4 and NA8, Universal AC Input Voltage
Part Number: 900-00144-01
Rack Kit
Single 1U Rack Kit to mount a single 1/2 rack unit
Part Number: 900-00139-01
Rack Kit
Single 1U Rack Kit to mount two 1/2 rack units
Part Number: 900-00140-01
A f f o r d a b l e Ne t w o r k e d A V
All Attero Tech products are proudly
made in the USA, right here in Indiana
Affordable Networked AV
text
Attero Tech, LLC
1315 Directors Row
Fort Wayne, IN 46808
(260) 496-9668
www.atterotech.com