Denver DV3 T TFD-1020DVBT Specifications

MODEL TFD-1020DVBT
10" LCD TV DVD Combo
Table of Contents
Contents
Table of Contents
1
Safety Precautions
2
Box Contents
3
Identification of Controls
Main Unit
Remote control unit
Insert the remote control battery
System Connections
Getting Started
4-7
4
5
6
6-7
7-12
SETUP Menu Setting(DVD/DVB)
General Operation
General Setup Page
Speaker Setup Page
Dolby Digital Setup
Preference Page
DVB-T Introduction
Area / Time Zone / Parental Age
Auto Scan
Manual Scan
Pewer Suppiy Preparation
Rechargeable Battery
Turning on the unit
TV Setup Menu
TV menu (only if switched to TV mode)
Playing a DVD or Video CD(Operation)
7-8
8
8
9
10
11-12
Basic operation
13-18
Audio CD and MP3/WMA Disc Features
Playing an Audio CD or MP3/WMA
Playing a JPEG Disc
Playing a DVD VR format Disc
Playing a MPEG4 Movie Disc
Program playback(not for Picture CD/MP3)
DIGITAL CARD and USB Device operation
13
13
14
15
15
16
17
Teletext
18-23
18
18-20
20
21
21-23
P9-P10
23-27
23
23
24
24
EPG
25
Reserve Channel
25
Channel Remap
25
26
26
Adjust Channel
OSD
Information on disc compatibility
27
Troubleshooting
P9-P10
28
Technical specifications
P9-P10
29
GB-1
Safety Precautions
Before using your TV, plesse read these instructions completely, and
keep this manual for future reference.
Carefully observe and comply with all warnings, cautions and instructions
indicated on the unit or descrbed in the owner s manual.
The lightning flash with an arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of un-insulated
“dangerous voltage” within the product enclosure that may be of dufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation mark within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
If at any time in the future you should need to dispose of this product
please note that waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice. (Waste Electrical and
Electronic Equipment Directive)
This unit complies with the relevant European safety, electrical
interference and dangerous substances directives.
Manufactured under license from Dolby Laboratories. “Dolby”
“Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
The power cable/disconnect device shall remain easy to operate/
disconnect.
N NOTES:
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Maintain well-ventilated
conditions around the product. Do not put the product on a bed,
sofa or anything that blocks ventilation. Install according to the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus (including amplifiers) that produce heat.
9. Read and follow all instructions to ensure correct and safe installation
and interconnection of the apparatus.
10.The apparatus must not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, must be placed on the
apparatus.
11. The mains socket-outlet must be installed near the apparatus and
the mains plug should remain readily operable.
12. Protect the power cord from being walked on. Pay particular attention
to the AC adapter and connections.
13. Only use mounting systems specified by the manufacturer.
14. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used,
exercise caution when moving the cart/apparatus combination to
avoid injury from tip-over.
15. Unplug the apparatus during lightning storms or when unused for
long periods of time.
16. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, for
example if the power-supply cord or plug is damaged, liquid has
been spilled on or objects have fallen into the apparatus, if the
apparatus has been exposed to rain or moisture, if it does not
operate normally, or if it has been dropped.
Note: Do not touch the colour TFT LCD screen directly.
GB-2
Box contents
TV set
ZOOM
Y
MENU
R
G
B
Remote control
External TV Antenna
MODEL TFD-1020DVBT
10" LCD TV DVD Combo
Audio/Video cable
AC/DC Adapter
Car Adaptor
This User Guide
If any of the accessories are missing, contact your dealer as soon as possible. Keep all the original packaging in case you need to return
the set to the dealer
GB-3
Identification of Controls
Main Unit
1. SOURCE
2. SCAN :TV or DVB scan
3. MODE
Enter TFT setup menu and TV setup menu in TV mode.
4. CH-/
(Down)
5. CH+/
(Up)
6. VOL-/
(Left)
7. VOL+/
(Right )
11
8. SETUP: Enter DVD setup menu
12
9. ENTER.
10.EJECT: Open/Close disc.
11. Remote sensor.
1 2 3 4 5 6 7 8 9
12.
10
Standby/on led indicator
13.ANT: antenna input.
14.IN AV OUT: AV out/in switch
13
14
15
16
15.VIDEO: Video input/output.
16.USB: USB port.
17
24
17
17.AUDIO: Audio i nput/output.
19
18.SD/MMC/MS: card slot.
18
20
21
22
23
19.VGA: VGA input.
20.Headphones jack.
21.POWER: power switch.
22.DC IN 9V: DC input.
23.CHARGE: Charge indicator, Red is charge, Green is full.
24. Disc in/out.
GB-4
Identification of Controls
Remote control unit
1 .MUTE
Disable Audio output.
1
2
17
18
2.
POWER
Switches Player ON and Standby.
4 .SUBTITLE
Selects a subtitle language.
5.ANGLE/TTX
Selects a DVD camera angle if available
in DVD mode. Teletext key in DVB mode.
9 .ENTER
Confirms menu selection.
10 .SETUP
Enter or exit setup menu.
11 .ZOOM
Enlarges video image.
12.REPEAT/DEL
Repeat chapter, title, all in DVD mode.
Delete channel in DVB mode.
13.TV/RADIO(DVB only)
Switch TV and Radio channels.
20.10+ BUTTON
Add 10+ to your selection with more
than one-digit.
5
10
20
4
6
11
14
15
19
21
22
7
24
8
9
7. CH+/-(
)
Channel up/down, cursor for OSD menu.
8. VOL+/-(
)
Volume up/down, cursor for OSD menu.
19.GO TO
Goto time point , title or chapter you want.
3
3.0-9 NUMBER BUTTON
Selects number, such as a TV channel.
6.TITLE
Return to DVD title menu.
18. EJECT
Open/Close disc.
7
12
13
23
25
ZOOM
Y
MENU
R
G
B
26
27
28
29
16
14. PRO/EPG
Program in DVD mode.
EPG(Electronic program guide) in DVB mode.
21. PBC/SCAN
PBC on/off switch in VCD mode .
Scan key in DVB mode.
22.AUDIO
Selects an audio language.
23. PLAY/PAUSE (
)
Starts or pause playback(DVD only).
24. STOP (
)
Stops playback(DVD only).
25.MODE
Enter the TV setup menu.
26.MENU
Accesses menu on a DVD disc.
Return toPBC menu on a VCD disc.
15.DISPLAY
Accesses On-Screen display.
27. Reverse Skip (
)
Go to previous chapter / track or to the
beginning(DVD only).
16.
/FAV
Fast backward in DVD .Set favourite
channel in DVB mode.
28. Forward Skip(
)
Go to the next chapter / track(DVD only).
17.SOURCE
Select DVD/USB/CARD/DVBT/TV in AV
out mode select VGA(PC)/AV IN in AV
in mode.
GB-5
29.
/PROT
Fast forward in DVD. Set protect
channel in DVB mode.
System Connections
Identification of Controls
System Connections
Insert the remote control battery
1.Open the battery door.
2.Insert two AAA size batteries
with correct polarity marked
inside the compartment.
Before you begin:
Do not connect the power cord until all other connections to
this player have been made.
Ensure that you observe the colour coding of cables when
connecting audio and video devices.
Connecting to an aerial or the external TV antenna:
This unit is equipped with a multi-standard tuner. Connect your
antenna connecter to the aerial input jack on the left side of the
player. Or you can also connect to the external antenna
(supplied) as shown below:
1
2
For the best results,aim the remote towards at the player ' s remote
sensor within 5 metres and angles of 60 degrees or less.
Under normal use the battery will last for one year.
Remove battery when you are not using the DVD player for a long
time.
Connecting to headphones
Connect the headphones to the headphone jack on the left side
of the player, as shown below:
When headphones are connected the speaker output will be
turned off automatically. Prolonged use of headphones at full
volume may damage your hearing.
Precautions when using batteries
1. Use only the size and type of batteries specified.
2. Do not mix different types of batteries together or old batteries
with fresh ones.
3. Exhausted batteries have to be removed to prevent possible battery
leakage.
4. Dispose of batteries properly according to environmental regulations.
GB-6
System Connections
Connecting to External TV
Connecting to a PC
Use the AV cables to connect the external TV set to the AV input jacks on
the left side of the unit, as shown below:
Use the Mini D-Sub 15 Pin cable (not Supplied) to the connect the
PC and the VGA input jack on the left side of the unit, as shown below:
In DVD mode, set AV IN/OUT switch to ¡°OUT ¡±to output AV signal
to the external TV.
set AV IN/OUT switch to IN to input AV signal from the PC.
Connecting External A/V Sources to the appliance
Refer to your audio equipment's manual before connection.
Use the AV cables to connect the external A/V sources to the
AV input jacks on the left side panel of the unit, as shown below:
Power Supply Preparation
Using the AC Adapter
The player is supplied with an AC adapter for powering the unit and
charging the battery.
1. Connect AC adapter to the left side of the unit in the jack marked
DC 9V IN as shown on the right.
2. Plug the power cord into a wall AC outlet. The /on led indicator
lights up. The indicator is red.
In DVD mode, set AV IN/OUT switch to ¡°OUT¡± to output AV signal to
the external A/V sources.
AC/DC adapter
Note:
1. Turn unit's power off before unplugging.
2. In the case of using the adapter, the LCD screen will be brighter than
using the rechargeable battery.
GB-7
Getting Started
Power Supply Preparation
Using the Car Adapter
The unit is supplied with a Car Adapter for powering the unit and
charging the battery in a vehicle.
Connect the car adapter power plug to the unit's DC IN 9V jack and the
other end to the vehicle cigarette lighter socket as shown on the right.
Car adapter
Attention
ØDo not operate the unit or view video while driving a vehicle.
ØPlace the unit in a proper position for viewing.
Rechargeable Battery
Replacing the fuse of the car adapter. Make sure the amperage
matches the specified value when replacing the fuse. If the fuse
is blown, check the power connection and replace with a new one. If
some problems occur, there must be a malfunction. In such cases,
please consult the nearest repair center.
Warnings:
Never use the fuse with a rated amperage over the one specified,
otherwise you may damage the unit.
About Rechargeable Battery Pack
The Unit includes a built-in lithium rechargeable battery. Charge
the battery fully before initial use. Charging time is normally about
5 hours. A fully charged battery delivers about 3 hours of use but
playing time varies from disc to disc. If the battery will not be used
for a long period of time, charge the battery up to 30%~60% of its
capacity before storage.
Working conditions and precautions for the rechargeable battery
ØNew battery should be fully charged before initial use.
ØBattery should only be used and charged when temperature is
between 32-100F.
ØNever put the battery in fire or water.
ØDo not expose the battery to high temperature or store in hot,
sunny place.
ØMaintain well-ventilated conditions around the product to avoid
overheating. Don't put the product on a bed, sofa or anything that
may block ventilation to the product.
ØDo not short the battery terminals.
ØDo not open the battery.
ØWhen charging the battery pack, the charge light will turn red,
When the charging is complete, the light will turn green.
ØWhen the battery is weak, low power indicator will appear on the
LCD screen. The player will turn off automatically several
minutes later.
Charging the Battery
The built-in battery can be charged by using the
supplied AC Adapter.
1. Plug one end of the supplied AC Adapter into
the unit's power jack marked with ¡°DC 9V IN ¡±
which is located on left side of the Player.
2. Plug the other end of the AC Adapter
AC/DC adapter
Cord into a wall AC Outlet.
Turning On the Unit
Before Operation:
1. Connect the aerial cable or input source to the antenna input socket
at the left side of the set.
2. After connecting the power supply and switching the power switch to
¡°I¡±, turn the unit on, by pressing the button on the front panel
or the remote control, the /on led indicator will turn to blue.
3. Use the SOURCE button to select the source: TV/DVD/USB/CARD/
DVBT in AV OUT mode or VGA in AV in mode.
4. To Switch the set to standby mode, press the button and the
/on led indicator will turn red.
5. To turn off the unit, switch the Power switch to ¡°o¡±.
6. If you are not going to use the set for a long time, switch the power off
completely by unplugging the power supply cable.
GB-8
Getting Started
TV Setup menu
To enter the TV Setup menu, press the "MODE" button. To exit the
TV Setup menu, press it repeatedly.
VOLUME
General operation
VOLUME
1. Press the MODE button repeatedly to display the menus in the
following order:
PICTURE->VOLUME->OPTION-> SYSTEM-> PRESET
2. To select a menu item, press the
buttons to scroll up and
down the list.
3. When a menu item is highlighted, use the
buttons to adjust
the setting.
51 VOLUME:Adjusts the VOLUME of
the sound.
OPTION
PICTURE
BRIGHT
CONTRAST
COLOR
ENGLISH
RESET
50 BRIGHT:
50 Adjusts the brightness of the picture
CONTRAST:
50
Adjusts the contrast of the picture
COLOR:
Adjusts the colour of the picture
ENGLISH:
Select the On-Screen-Display,
language.
RESET:
Reset to the default settings.
GB-9
NORMAL
ZOOM
NORMAL: Rotate the picture upside
16:9 down.
ZOOM: select the aspect ratio:
16:9 or 4:3.
VGA and AV IN input
VGA: support 800x600x(60)HZ
AV IN: Support PAL and NTSC input.
Getting Started
TV menu (only if switched to TV mode)
PRESET
SYSTEM
S-ROLOC
S.SYS
SWAP
COPY
AUTO SEARCH
SEARCH
FINE
TUNE
BAND
VHFL
POSITION
0
Skip
OFF
AUTO
I
5
4
S-ROLOC:select a color system: AUTO,PAL,SECAM
S.SYS: select a sound system: I, L,BK,DK
SWAP: Use the
buttons to highlight ¡°SWAP¡±The current
channel eg.¡°4¡±will display on the right.Then, use the
buttons
to select the channel you want to swap, eg¡°5¡±.
Press the button to highlight the currrent channel ¡°4¡±and then
press the button to swap.
COPY: Follow the steps in ¡°SWAP¡±to copy the current channel to
the other channel.
AUTO SEARCH: Press the button and then the unit will search
for availableTV Channels from channel 0 automatically.
When it finds a station, it will automatically store in the first location
and move to the next.
During autosearch, you can press the button to stop.When
autosearch is complete, the unit will display the first station found.
SEARCH: Search for a station manually.
Press the or button once and the unit will search for a station.
FINE TUNE: Use the
buttons to search forward and backward to
improve reception if necessary.
BAND: Select the frequency band: VHF,VHFL,VHFH
POSITION: Select a channel
SKIP: When you turn on the function, the current channel will be
skipped when you select the channels using the CH +/- buttons.
You can still select the channel .you have skipped using the
number buttons.
GB-10
Getting Started
Playing a DVD or Video CD(Operation)
Playback Setup DVD
1. Set the power switch to¡° I¡± at the left side of the unit.
3.To go directly to any chapter during DVD playback, input the
chapter/track number .
2. Press SOURCE to select DVD mode, and insert your disc,
with the playback side facing back. It will be loaded automatically.
Changing the Audio Channel VCD
Press AUDIO repeatedly during playback to select a different audio
channel (Stereo, Left Mono, Right Mono or MIX-Mono).
3. To eject the disc, press the EJECT button.
Repeat DVD VCD
functions can be controlled by remote control unit.
You can Most
playofa the
title/chapter(track)/all
on a disc repeatedly.
Press REPEAT during playback to select a desired repeat mode.
Use the
buttons to select the title/chapter you want to
play, then press ENTER to start.Press MENU to return to the
menu.
DVD Video Discs - "
Repeat Chapter / Title/Off"
Chapter: repeats the current chapter.
Title: repeats the current title.
All : repeats all on a disc.
Off : does not play repeatedly.
VCD
Use the number buttons to select the track you want to play and
press MENU to return to the menu (PBC on only).
Menu settings and operating procedures may differ.Follow the
instructions on each menu.
N
Video CDs, discs - "
Repeat Track /All/Off"
Track : repeats the current track
All : repeats all the tracks on a disc.
Off : does not play repeatedly.
Notes:
1.If the parental control is set and the disc isn ' t fit for the rating
setting, you must input the password.(See "PARENTAL") .
N
2.DVDs may have a region code.Your player does not play
discs that have a region code different from your player.
3.Unless stated otherwise,all operations described are used the
remote control.Some features may also be available on the
setup menu.
Skip to another CHAPTER/TRACK DVD VCD
When a title on a disc has more than one chapter or a disc has
more than one track, you can skip to another chapter/track as
follows:
1.Press
or
briefly during playback to select the next
(or previous)chapter/track or to return to the beginning of the current
chapter/track.
2.Press
twice briefly to skip back to the previous
chapter/track.
Notes:
1.On a Video CD with PBC, you must set PBC to Off to enable the
repeat function.
Zoom DVD VCD
Use zoom to enlarge or reduce the video image:
1.Press ZOOM during playback or still playback to activate the
Zoom function. The square frame appears briefly in the right bottom
of the picture.
2. Each press of the ZOOM button changes the TV screen in the
following sequence:
3. Use the
buttons to move the zoomed picture.
4. To resume normal playback, press ZOOM button repeatedly
until the picture size returns to normal.
GB-11
Getting started
Playing a DVD or Video CD(Operation)
N
Note:Zoom may not work on some DVDs.
Special DVD Features- Checking the contents of DVD discs:
Menus DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Input the
corresponding number or use the
buttons to highlight
your selection.Then press ENTER.
MENU
1. Press MENU.If the current title has a menu, the menu appears on
the screen. Otherwise, the disc menu may not appear.
2. The MENU offers features such as camera angles,spoken language
and subtitle options, and chapters for the title.
3. Press MENU to exit.
N
Camera Angle DVD
If the disc contains scenes recorded at different camera angles, you
can change to a different camera angle during playback. Press
ANGLE repeatedly during playback to select a desired angle. Note
that the number of the current angle appears on screen.
.
Note:
The angle indicator will appear on the TV screen during scenes
recorded at different angles as an indication that angle switching is
possible.
TITLE button DVD
DVD disc:
Press TITLE button to display the DVD menu or titles available
on the disc. Then you can use "
" and ENTER button to select
programs.
Disc
The DVD player can play CD and MP3/WMA formatted recordings
on CD-R,CD-RW,DVD+R and DVD+RW discs.
Audio CD
Once an Audio CD is inserted it will be played automatically. Press
the DISPLAY button to display playblack information on screen,
such as track elapse time.
Changing the Audio Language DVD
Press AUDIO repeatedly during playback to select a different audio
language or audio track.With DVD-RW discs recorded in VR mode
that have both a main and a Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of both (Main +
Bilingual) by pressing AUDIO.
Subtitles DVD
Press SUBTITLE repeatedly during playback to select the different
subtitle languages.
GB-12
Basic operation
MP3/WMA Disc Features
MP3 / WMA
1. Press
buttons to select a folder, and press ENTER to
enter the folder contents.
2. Press
buttons to select a track then press
or ENTER.
Playback starts.
MP3 / WMA disc compatibility with this player is limited as
follows:
1.Sampling frequency: within 8 - 48 kHz( MP3 ),within 32 - 48kHz
( WMA ).
2.Bit rate: within 8 - 320kbps( MP3 ),32 - 192kbps ( WMA ).
The player cannot read an MP3
extension other than MP3/WMA.
/ WMA file that has a file
Customers should note that permission is required in order to
download MP3 / WMA files and music from the Internet. Our company
has no right to grant such permission. Permission should always be
sought from the copyright owner.
Playing an Audio CD or MP3/WMA
Pause CD
1. Press
2. To return to playback, press
again.
MP3 WMA
CD
Skip to another Track
1. Press
or
briefly during playback to go to the next
(or previous) track or to return to the beginning of the current track..
2. Press
CD-R physical format should be ISO 9660.
MP3 WMA
during playback.
twice briefly to go back to the previous track.
3. You can play any track by inputting its number.
If you record MP3/ WMA files using a software that cannot create
a file system (eg. Direct-CD) it is impossible to playback MP3/WMA
files.We recommend that you use Easy-CD Creator,which creates
an ISO 9660 file system.
MP3
Repeat Track/Folder/All/Off CD
You can play a track/folder/all on a disc.
File names should have a maximum of 8 letters and must incorporate
an" .mp3" or " .wma" extension.
1. Press REPEAT when playing a disc. The repeat icon appears.
They should not contain special letters such as "/? * : < > l "etc.
The total number of files on a disc should be less than 650.
This DVD player requires discs and recordings to meet certain
technical standards in order to achieve optimal playback quality.
Pre-recorded DVDs are automatically set to these standards. There
are many different types of recordable disc formats(including CD-R
containing MP3 or WMA files) and these require certain pre-existing
conditions (see above) to ensure compatible playback.
WMA
2. Press REPEAT to select a desired repeat mode.
For CD,
Track: repeats the current track.
All: repeats all the tracks on a disc.
Off(No display): normal playback.
For Mp3 and WMA,
SINGLE: play the current track only.
REPEAT ONE: repeat the current track.
REPEAT FOLDER: repeat the current folder.
FOLDER: play the current folder only.
SHUFFLE: play randomly.
RANDOM: play randomly and repeat.
GB-13
Basic operation
Playing a JPEG Disc
Viewing a JPEG Disc
Using this DVD Player you can view Kodak PICTURE CDs
and discs
with JPEG files.
1.Insert a disc . The file menu appears on the TV
screen .
2. Press the
buttons to select a folder, and press ENTER.
A list of files in the folder appears.
3. If you want to play a particular file, press then
buttons to
highlight the file and press ENTER or
.
4.If it is a Kodak Picture CD it will be played automatically.
NOTE:
Press"
" to move to the next page , "
folder , and " MENU" return to menu.
" to return to previous
JPEG disc compatibility with this player is limited as follows:
1.Depending upon the size and number of JPEG files, it could take
a long time for the DVD player to read the disc¡¯s contents. If you
don¡¯t see an on screen display after several minutes, some of the
files may be too large. Reduce the resolution of the JPEG files to
less than 2M pixels as 2760 x 2048 pixels and burn another disc.
2.The total number of files and folders on the disc should be less
than 650.Some discs may be incompatible due to a different
recording format or the condition of disc.Ensure that all the
selected files have the." jpg" extensions when copying into the CD
If the files have. "jpeg" extensions, please rename them as."jpg"
file.File names without."jpg" extension will not be able to be read
by this DVD player. Even though the files are shown as JPEG
image files in Windows Explorer.
JPEG
N Zoom
1.Press 'ZOOM' .
2,Used "
" to enlarge,or "
" to reduce the picture.
To rotate picture
Press the
buttons or during showing a picture to rotate
the picture clockwise or counter clockwise.
View the contents in thumbnail mode
when a JPEG disc is played,press the
button to display JPEG
pictures in thumbnail mode.Use the
buttons to select the
picture and press the ENTER button to play. Also, you can select
¡°Slide Show ¡±,¡°Menu ¡±(remote control key function) or ¡°Prev
Next ¡±(previous or next page).
GB-14
Basic operation
Playing a DVD VR format Disc
N
Playing a MPEG4 Movie Disc
This unit will play DVD-R/RW discs recorded using the DVD-Video
format that have been finalized using a DVD-recorder.
Using this DVD Player you can play MPEG4 disc.
1. Insert a disc .The folder menu appears on the TV screen.
This unit will play DVD-RW discs recorded using the Video
recording (VR) format.
2. Press the
buttons to select a folder, and press ENTER.
A list of files in the folder appears.
1. Insert a disc .The DVD-VR menu appears on the TV screen.
3. If you want to play a particular file,press the
highlight the file and press ENTER or
.
2. Press / to select a track then press
playback starts.
4. Press the
buttons to
or ENTER and
Note:
Unfinalized DVD-R/RW discs cannot be played in this player.Some
DVD-VR disc are made with CPRM data by DVD RECORDER.
Player does not support these kinds of discs and display
"unknown disc".
What is "CPRM"
CPRM is a copy protection system (with scramble system)only
allowing the recording of 'Copy once' broadcast programs.CPRM
stands for content Protection for Recordable Media.
This player is CPRM compatible, which means that you can record
copy-once broadcast programs, but you cannot then make a copy
of those recordings.CPRM recordings can only be made on
DVD-RW discs formatted in VR mode,and CPRM recordings can
onlybe played on players that are specifically compatible with CPRM.
5.Press NEXT
button to exit.
to move to the next page.
MPEG4 disc compatibility with this player is limited as follows:
1.Available resolution size of the MPEG4 file is under 720x576 (W xH)
pixel.
2.The file name of the MPEG4 subtitle is available by 56 characters.
3.If there is on code to express in the MPEG4 file, it may be
displayed as " _ "mark on the display.
If the number of the screen frame is over 30 per second,this
unit may not operate normally.
If the video and audio structure of recorded file is not interleaved,
either video or audio is outputted.
Playable MPEG4 file
".avi ", ".mpg ", ".mpeg".
Playable Audio format
"AC3 ", "PCM ", "MP3 ", "WMA ".Sampling frequency:
within 8 - 48 kHz (MP3),within 32 - 48kHz (WMA) Bit rate:
within 8 - 320kbps (MP3), 32 - 192kbps (WMA)
GB-15
Basic operation
Program playback(not for Picture CD/MP3)
DVD/VCD/CD
The program function enables you to select your favourite titles,
chapters or tracks and play them in a favourite order.
1. Press PROG while the disc is playing
The program menu appears.
Notes:
- Program can be activated only when a disc is in the DVD player.
- When the program menu appears, the setup menu setting is
not allowed.
Program:TT(06)/CH(- -)
1
2
3
4
5
TT:
TT:
TT:
TT:
TT:
CH:
CH:
CH:
CH:
CH:
Exit
6
7
8
9
10
TT:
TT:
TT:
TT:
TT:
CH:
CH:
CH:
CH:
CH:
NEXT
2.Use the number buttons (0-9) to input the titles, chapters or
tracks.
You can use the
buttons to move to another field and
re-enter the title and chapter(or track).
You can also move to “EXIT”, “START”, or “NEXT”/“PREV”, and
press the ENTER button to confirm.
3.Move to “START” to start programmed playback.
Program:TT(06)/CH(- -)
1
2
3
4
5
TT: 06 CH:01
TT: 05 CH:01
TT:
CH:
TT:
CH:
TT:
CH:
Exit
6
7
8
9
10
Start
TT:
TT:
TT:
TT:
TT:
CH:
CH:
CH:
CH:
CH:
NEXT
4. To resume normal playback from programmed playback, Press
PRO Gand move to “STOP” on the program menu. Press the ENTER
button to stop programmed playback.
Program:TT(06)/CH(- -)
1
2
3
4
5
TT: 06 CH:01
TT: 05 CH:01
TT:
CH:
TT:
CH:
TT:
CH:
Exit
6
7
8
9
10
Stop
TT:
TT:
TT:
TT:
TT:
CH:
CH:
CH:
CH:
CH:
NEXT
GB-16
Basic operation
DIGITAL CARD and USB Device operation
Digital cards (MMC/SD/MS) and USB device with MP3&Pictures
(.jpg) may be played through the unit.
How to play USB/SD/MMC/MS
An example of USB mode menu as following:
How to select USB/SD/MMC/MS.
1. Turn the unit on.
2. Insert either a USB device or a SD/MMC/MS card into the USB
port or the card slot located on the left hand side of the appliance.
USB
Card
USB
Playing operations are the same as playing a Mp3 disc.
3. Press the "SOURCE" button to select USB or CARD mode,
if more than one media
is inserted.
SOURCE
MUTE
SOURCE
ANGLE/
TTX
AUDIO
EJECT
STEP
SUBTITLE
PBC/
SCAN
SOURCE
SCAN
MODE
CH-
CH+
VOL-
VOL+
SETUP
EJECT
TITLE
GOTO
SETUP
REPEAT
/DEL
TV/
RADIO
PRO/
EPG
DISPLAY
ZOOM
MENU
/FAV
/PROT
SOURCE
GB-17
SETUP Menu Setting(DVD/DVB)
General Operation&General Setup Page
General Operation
1.Press SETUP to enter the Setup Menu.
2.Press ENTER to enter the next level submenu or confirm your
selection.
3.Press
to enter the submenu or returen to the previous menu
4.Press
to highlight the menu item.
Dolby
- - GENERAL SETUP PAGE - PS
TV DISPLAY
ANGLE MARK
OSD LANGUAGE
CLOSED CAPTIONS
SCREEN SAVER
To exit from the menu
Press SETUP to exit and the settings will be stored in the player's
memory even if the player is switched off.
SET TV DISPLAY MODE
General Setup Page
The options included in General Setup page are:"TV DISPLAY",
"ANGLE MARK","OSD LANGUAGE","CLOSED CAPTIONS",
"SCREEN SAVER",Follow the steps below:
16:9
Wide
4:3
Letter Box
Dolby
- - GENERAL SETUP PAGE - TV DISPLAY
ANGLE MARK
OSD LANGUAGE
CLOSED CAPTIONS
SCREEN SAVER
GO TO GENERAL SETUP PAGE
1.Press SETUP to enter the setup menu.
2.Press
to select the 'General Setup page'.
TV Display
Set the aspect ratio of the DVD Player according to your TV.
4:3 PANSCAN
4:3 LETTERBOX
16:9
4:3
Pan Scan
4:3 PANSCAN
If you have a normal TV and want both sides of the picture to be
trimmed or formatted to fit your TV screen.
4:3 LETTERBOX
If you have a normal TV. In this case , a wide picture with black
bands on the upper and lower portions of the TV screen will be
displayed.
16:9
If you have a wide-screen TV,then you can select the item.
GB-18
SETUP Menu Setting
General Setup Page
ANGLE MARK
Displays current angle setting information on the right hand corner
of the screen if available on the disc.
Dolby
- - GENERAL SETUP PAGE - TV DISPLAY
ANGLE MARK
OSD LANGUAGE
CLOSED CAPTIONS
SCREEN SAVER
CLOSED CAPTIONS
Closed captions are data that are hidden in the video signal on some
discs.Captions are different from subtitles because captions hearing
are impaired by showing the sound effects(e.g.,"phone ringing" and
" footsteps"),while subtitles cannot.
Before you select this function,please ensure that the disc contains
closed captions information and your TV set also has this function.
PS
ON ON
ENG OFF
ON
ON
Dolby
- - GENERAL SETUP PAGE - TV DISPLAY
ANGLE MARK
OSD LANGUAGE
CLOSED CAPTIONS
SCREEN SAVER
SET ANGLE MARK
On:Enable Angle Mark.
Off:Disable Angle mark.
PS
ON
ENG
ON
ON
OFF
ON
CLOSED CAPTION
OSD LANGUAGE
You can select your preferred language setting.This DVD
system will automatically switch to the selected language whenever
you load a disc.If the language selected is not available on the disc,
the disc's default language will be used instead.
On:Enable Closed Captions.
Off:Disable Closed Captions.
SCREEN SAVER
This function is used to turn the screen saver On or Off.
Dolby
Dolby
- - GENERAL SETUP PAGE - - - GENERAL SETUP PAGE - TV DISPLAY
ANGLE MARK
OSD LANGUAGE
CLOSED CAPTIONS
SCREEN SAVER
PS
ON
ENG
ON
ON
TV DISPLAY
ANGLE MARK
OSD LANGUAGE
CLOSED CAPTIONS
SCREEN SAVER
ENGLISH
DANNISH
DUTCH
FINNISH
FRENCH
GERMAN
ITALIAN
PORTUGUESE
PS
ON
ENG
ON
ON
ON
OFF
SCREEN SAVER
SET OSD LANGUAGE
On:In STOP,PAUSE or No DISC mode,if no actions are performed
about 3 minutes,the Screen Saver will be activated.
Off:Screen Saver is disabled.
GB-19
SETUP Menu Setting(DVD/DVB)
Speaker Setup Page
Dolby Digital Setup
Dolby Digital Setup
The options included in Dolby Digital Setup are: 'Dual Mono ' and
'Dynamic '.
Speaker Setup Page
The options included in Speaker Setup Page is 'Downmix'.
Dolby
Dolby
- - ANALOG AUDIO SETUP PAGE - -
- - DOLBY DIGITAL SETUP - -
DOWNMIX
DUAL MONO
DYNAMIC
GO TO SPEAKER SETUP PAGE
GO TO DOLBY DIGITAL SETUP
1.Press SETUP.
2.Press
to select the 'Speaker Setup page'.
1.Press SETUP.
2.Press
to select the 'Dolby Digital Setup'.
DOWNMIX
This options allows you to set the stereo analog output of your
DVD Player.
DUAL MONO
Dolby
Dolby
- - DOLBY DIGITAL SETUP - DUAL MONO
DYNAMIC
- - ANALOG AUDIO SETUP PAGE - DOWNMIX
STR
STR LT/RT
STEREO
STEREO
L-MONO
R-MONO
MIX-MONO
DUAL MONO (1+1) SETUP
SET DOWNMIX MODE
LT/RT :Select this option if your DVD Player is connected to a
Dolby Pro Logic decoder.
Stereo :Select this option when output delivers sound from the
two front speakers only.
To select the setting that matches the number of speakers you have
connected.
GB-20
SETUP Menu Setting(DVD/DVB)
Dolby Digital Setup
Preference Page
Stereo:Left mono sound will send output signals to Left speaker
and Right mono sound will send output signals to Right speaker.
L-Mono:Left mono sound will send output signals to Left speaker
and Right speaker.
R-Mono:Right mono sound will send output signals to Left speaker
and Right speaker.
Mix-Mono:Left and Right mixed mono sound will send output
signals to Left and Right speakers.
DYNAMIC
To optimize the dynamic sound output high volume outputs are
softened, enabling you to watch your favourite movie without
disturbing others.
The levels for dynamic selection:Full,7/8,3/4,5/8,1/2,3/8,1/4,1/8
and Off.
- - DOLBY DIGITAL SETUP - -
SET DRC TO 1/8
STR
Dolby
- - PREFERENCE PAGE - TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
GO TO PREFERENCE PAGE
1.Press SETUP.
2.Press
to select the 'Preference Page'.
Note:
Some Preference features can be selected only during 'No
Disc' condition or STOP( ) mode.
Dolby
DUAL MONO
DYNAMIC
Preference Page
The options included in Preference page are : 'TV TYPE',
'PBC','AUDIO','SUBTITLE','DISC MENU','PARENTAL',
and 'DEFAULT '.
-- --- --- --- - -- -
Full
Off
TV Type
Selecting the colour system that corresponds to your TV used in AV
outputs.This DVD Player is compatible with both NTSC and PAL.
In order for a DVD disc to play on this Player,the colour system of
the Disc,the TV and the DVD Player should match.
Dolby
- - PREFERENCE PAGE - TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
PAL
SET TV STANDARD
GB-21
PA
MULTI
NTSC
SETUP Menu Setting(DVD/DVB)
Preference Page
MULTI-Select this if the connected TV, is muliti system.
PAL - Select this if the connected TV is PAL system .It will change the
video signal of a NTSC disc and output in PAL format.
NTSC-Select this if the connected TV is NTSC system .It will change
the video signal of a PAL disc and output in NTSC format.
AUDIO,SUBTITLE AND DISC MENU
These options set the Audio , Subtitle and Disc menu language .
Dolby
- - PREFERENCE PAGE - TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
PAL
ENG
ENG
ENGLISH
FRENCH
GERMAN
ITALIAN
PORTUGUESE
SPANISH
PREFERRED AUDIO LANGUAGE
- 'Audio '(disc 's soundtrack)
- 'Subtitle '(disc 's subtitles)
- 'Disc Menu '(disc 's menu)
PARENTAL
Some DVDs may have a parental level assigned to the complete disc
or to certain scenes on the disc.This feature lets you set a playback
limitation level.The rating levels are from 1 to 8 and are country
dependent. You can prohibit the playing of certain discs that are not
suitable for your children or have certain discs played with alternative
scenes.
VCD,SVCD,CD have no level indication,so parental control function
has no effect on those kinds of discs.
Dolby
DVDs that are rated above the level you selected will not play
unless you enter your four-digit password and choose a higher level
rating.
To disable Parental controls and have all Discs play,choose 'Off'.
Note:
- Some DVDs are not encoded with a rating though the movie rating
may be printed on the Disc cover. The rating level feature does not
work for such Discs.
Rating explanations
1 KID SAF
- Kids material;recommended especially for children and viewers
of all ages.
2 G
- General Audience; recommended as acceptable for viewers of all ages.
3 PG
- Parental Guidance suggested.
4 PG13
- Material is unsuitable for children under age 13.
5-6 PG-R
- Parental Guidance-Restricted;recommended that parents restrict
children under 17 from viewing or allow to view only when supervised
by a parent or adult guardian.
7 NC17
- No children under age 17;not recommended viewing for children
under age 17.
8 ADULT
- Mature material;should be viewed only by adults due to graphic
sexual material,violence or language.
OFF
- It will play all discs.
NOTE:The default password is 1369.
- - PREFERENCE PAGE - TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
PAL
ENG
ENG
1 KID SAF
2G
3 PG
4 PG13
5 PGR
6R
7 NC17
8 ADULT
SET PG
GB-22
SETUP Menu Setting
Preference Page
Auto Scan
DEFAULT
Setting the 'Default ' function will reset all options and your personal
settings to the factory defaults and all your personal settings will be
erased.
Dolby
In DVB mode, press PBC/SCAN key on the remote, then press
ENTER to confirm.
1.
2:
3.
4.
5.
- - PREFERENCE PAGE - TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
There are two ways to start auto scan.
PAL
ENG
ENG
In DVB mode,Press " Setup" key.
Go to DVB-T Setup page.
Go to Channel Setup.
Go to Auto Scan and select " Start" .
Press ENTER.
RESET
LOAD FACTORY SETTING
Auto Scan
Status
PASSWORD SET UP PAGE
PASSWORD MODE:
ON: Need to enter password to change the parental level.
OFF: Disable the password function.
PASSWORD:
Set new password.
Note: The default password - 1369 is always valid.
Area/Time Zone/ Parental Age
Area:Choose the area/region you lived.
Time zone: Choose the time zone you lived.
Parental Age: Choose the parental age control level.
Dolby
Freq: 545000KHz
TV Total No: 03
Radio Total No: 00
Find TV No: 03
Find Radio No: 00
Found Channels
TV 01 ÖÐÒ•”µÎ»Ì¨
TV 02 ÖÐҕЄ̨
TV 03 Éú»îîlµÀ
29%
Progress:
When all the digital TV and Radio stations have been found,
the scan progress will go to 100%,the program will play
automatically after 3 seconds.
Press PBC/SCAN key on the process of channel search,
Select OK,you may exit channel scan; Select Cancel, channel
scan would continue.
- - DVB-T Setup page - Area
Time Zone
Parental Age
Channel Setup
GER
Auto Scan
Status
Found Channels
Dis
Freq: 722000KHz
TV Total No: 00
Radio Total No: 00
Go To DVB-T Setup Page
Cancel auto scan?
GB-23
OK
Cancel
DVB-T Introduction
Teletext
Manual Scan
Pressing the Angle/TTX button to turn on/off teletext stream display.
1.Press Setup key.
2.Go to DVB-T page.
3.Go to channel Setup.
4.Go to manual Scan and select " Start".
5.Press ENTER key.
Manual Scan
Status
Found Channels
Freq: 050500KHz
Scan
Press & keys to select the frequency you want
Press number buttons on the remote directly
Press the ENTER button twice to confirm Scan, or press PBC/SCAN key
to cancel manual scan.
The Unit will scan for all the digital TV and radio stations available
in your area and list them below Found Channels.
Manual Scan
Status
Freq: 545000KHz
Find TV No:03
Find Radio No: 00
Operation
Number key0-9:Main Page(800 pages)
arrow key: next/previous page
arrow key: sub page jump(283 pages)
Note:
When you press Audio button you can use the buttons as follow
Yellow/ZOOM : turn the text double
Red/MENU
:Hold the current page
Green/
: Reveal the especial information.
Blue/
: Adjust the Mix
Found Channels
TV 01 ¹«¹²ëŠÒ• PTS
TV 02 ÐЄÓëŠÒ• DiMo
TV 03 Æë¼ÒëŠÒ• MTV
Add
When all the digital TV and radio stations have been found, Select
£¢Add£¢ can add channels.
Press PBC/SCAN key to exit manual scan page and start to play
program.
GB-24
DVB-T Introduction
EPG
EPG(Electronic Program Guide)
The EPG menu is used to look at what is being broadcast on a TV or
radio channel later in the day.
1.To access the EPG menu, pressing PRO/EPG key on the remote
control.
2.Select £¢program£¢ on the EPG Menu and pop up a program list of this
channel in the day.
EPG
Terrestrial
Terrestrial
003 BBC
TWO
EPG
Channel BBC TWO
Program
08:50-09:00
Snailsbu
09:00-09:20
Tweenies
2003/08/20
08:53:13
Terrestrial
Terrestrial
001 TV01
10:00-11:00
11:00-12:00
12:00-13:00
13:00-14:30
´óËÎÌáÐ̹Ù
Ê®°ËÁ_•h
ÖÐÒ•ÎçégЄ
Ц°Á½-ºþ
2006/03/28
10:04:13
29/03
29/03
29/03
29/03
14:30- 15:30
15:30-16:30
16:57-17:57
17:00-18:00
OK
Exit
Delete
Press Play key to see the Reserve Program Info.
Select Delete to cancel the program reserve, the channel
name would disappear from reserve program list.
Select OK to return to reserve program page.
Reserve channel is to remind you that the TV program will start at your
preset time.
1.To access the EPG menu, pressing PRO/EPG key on the remote
control.
2.Select £¢program£¢ on the EPG Menu and pop up a program list of this
channel in the day.
3.Press ENTER key on the remote and pop up a selection menu.
4.Select OK to reserve this program.
The Channel Remap option allow you to select how your channels will
be ordered in the channel list.
1. Press Setup key.
2.Go to the DVB-T Setup.
3.Go to channel Setup.
4.Go to Channel remap and select " Start".
5.Use
keys to remove high-light to select the channel you want
to remap, then remove high-light to your target place.
6.Press ENTER key.
010 TV10
Reserve the program?
11:58-13:00
Terrestrial
Terrestrial
BBC
BBC1
BBC2
BBC3
Channel Remap
Reserve Channel
EPG
Reserve Program Info
Reserve Program
001
001
001
001
OK
Cancel
GB-25
Channel Remap (001-004)
Channel Remap (001-004)
001 7 Digital
002 7 Digital 1
003 7 Digital 2
004 7 Digital 3
005 7 HD Digital
Channel Remap
Exit
001 7 Digital
002 7 Digital 1
003 7 Digital 3
004 7 Digital 2
005 7 HD Digital
Channel Remap
Exit
NEXT
NEXT
DVB-T Introduction
OSD
Adjust Channel
£¢Adjust£¢ channel allow you to add delete your favourite channels
and add your protected channels.
Press DISPLAY key once/twice
Means a deleted channel
CH-01
Press key
/FAV to set favorite channel,a red icon display
beside the channel name.
Means a locked channel
CA
2155/95/95 ??:??:??
Audio: 00/00
CA
Press key REPEAT/DEL to set £¢delete£¢ channel, a cyan icon
display beside the channel name.
Means a screambled channel
Has subtitle
Has teletext
Adjust Channel (001-004)
001 7 Digital
002 7 Digital 1
003 7 Digital 3
004 7 Digital 2
005 7 HD Digital
Favorite
Delete
Exit
Means a favorite channel
Protected
NEXT
Press key
/PROT to set £¢protect channel£¢,you will see
the Parental Protected box.
Enter the pin code(136900) and then select OK to confirm, a
yellow icon will display beside the channel name.
Select Cancel to return.
Adjust Channel (001-004)
001 7 Digital Parental Proiecied
CH-01
CA
2155/95/95 ??:??:??
Audio: 00/00
Signal Strength:
Signal Quality:
Please Input the
002 7 Digital 1
Password to set
003 7 Digital 3
parental proteltion.
004 7 Digital 2
xxxxxx
005 7 HD Digital
Cancel
OK
Favorite
Delete
Protected
Exit
NEXT
GB-26
0%
0%
Information on disc compatibility
Disc formats supported by this DVD player:
DISC LOGO
DVD
DVD-R
DVD+R
DVD-RW
DVD+RW
CONTENTS
Audio+Video
SIZE
12cm
MAXIMUM TIME
133min(SS-SL)
242min(SS-DL)
266min(DS-SL)
484min(DS-DL)
CD
Picture
Audio
Images (high
resolution despite
compression)
12cm
74min
12cm
The operating characteristics of some DVD discs are specified by
the software maker. Please refer to the instruction manual supplied
with the disc for further instructions.
This DVD Player will play most recordable (CD-R) OR re-writable
(CD-RW) CDs, and most recordable (DVD-R, DVD+R) or re-writable
(DVD-RW, DVD+RW) DVDs. In some cases, discs created by a
computer must be finalised in order to enable playback.
Discs created by some computers and/or software programs may not
be compatible. This will affect playback but is not a defect of this device.
Region code
This DVD player is designed and manufactured for
playback of region "2"encoded DVD software.
This unit can play only DVD discs labeled "2" or "ALL".
2
Disc terminology:
Title:
Generally, pictures or music compressed on a DVD are divided into
several sections, called ¡°titles¡±.
Chapter:
A chapter is a smaller segment of video, picture or music within a DVD
under the title. A title is comprised of one or more chapters, each
numbered for easy searching. Some discs may not have chapters.
Track:
A track is a segment of music on a CD or another type of disc.
Each track is numbered for easy searching.
Care of Discs
1. Hold the disc by placing your fingers in the centre and around the
edges. Do not touch the disc surface.
2. Do not bend the disc.
3. Do not expose the disc to direct sunlight or heating sources.
Store discs in their cases, vertically, and in dry conditions.
Prevent exposure to:
Direct sunlight
Heat
Extreme humidity
Clean the disc surface with a soft, dry cleaning cloth, Wipe the
disc surface gently, from the centre towards the outer edge.
Do not apply thinner, alcohol, chemical solvent, or sprays when
cleaning. Such cleaning fluids may permanently damage the
disc surface.
GB-27
Troubleshooting
Should you experience problems, please consult the troubleshooting
guide below first.
Symptom
TV MODE
Possible Fault
Remedy
USB, SD/MMC/MS
The appliance does
not work. No LED
Power not connected to
the mains.
The fuse of the car
adapter is blown
Check the AC/DC adapter
and AC mains cable are
properly connected.
Replace the fuse with
same capacity
The appliance does
not work.
The appliance is in
standby mode.
Press the power button on
the remote control or TV.
Backlight off
The appliance is faulty
No picture.
TV in VGA Mode
Select TV or DVBT mode,
or reconnect the appliance
to the PC. Ensure correct
AV IN/OUT Setting
Set not tuned in.
Aerial not connected
Tune TV to local stations
Set switched to VGA mode
Select TV or DVBT mode.
Bad quality sound
or picture.
Poor signal
If using an indoor aerial,
replace it with an outdoor
aerial and try searching
again. Carry out fine tuning.
No sound
Volume turned down
or Mute set.
Teletext incomplete
or breaking up
Poor signal
Turn the volume up or
switch off mute.
Check the aerial. Have a
new outdoor aerial fitted.
No picture.
Blue screen
Unable to insert a
USB device or
SD/MMC/MS card
Some external hard disks may not be supported.
USB, SD/MMC/MS Hard disks that have built-in power supply
device is not read should be favoured.
NTFS format is not supported. Check if the USB
device file system is in FAT or FAT32 format.
Remote control
Change the batteries.
If is the remote control
is used frequently,
change the batteries
every 6 months.
An object is blocking Move objects that are
between the appliance
the remote control
and the remote control.
infrared signal.
Batteries are low
The remote control
or empty.
is not working
Connect a good aerial signal.
Intermittent
operation.
DVD mode
Insert disc correctly. The disc
The appliance will
not play discs
Disc inserted incorrectly must be inserted with the
The disc is dirty or
damaged.
Player will not
eject disc.
Player is malfunctioning.
The device or card is Insert the device or card
inserted the wrong
the right way around.
way around.
playback side facing the back.
Clean disc and check for
damage.
Try another disc.
Turn off the TV completely,
wait for 30 seconds and
turn it back on.
GB-28
Batteries are low.
Ambient light is
too strong.
Change batteries. Do not
place a strong light source
near the infrared receptor.
Technical Specifications
USB, card
TV
TV System
Screen size
Aspect ratio
Resolution
View angle
Brightness (cd/m )
Contrast
Response time
Aerial input
Audio output
Mains power
Power consumption
Dimensions
Weight
Car adaptor
USB port type
USB maximum handling capacity
Card type
Card maximum handling capacity
PAL BG/DK/I SECAM L/L
10.2” (diagonal)
16:9
800X3(RGB)X480
65¡ã(left)x65¡ã(right)
x45¡ã(up)x65¡ã(down)
250( cd/m )
300:1
35 ms
75 ohm
2x2 W
DC 9V/2A
15W
270X120.6X254MM
(include stand & handgrip)
270x58x222MM
2.15kg
1.5A Fuse
Remote control
Type
Operating distance
Operating angle
Batteries
Dimensions
Weight
TV system
DVD, DVD+R/RW, DVD-R/RW,
CD-DA, CD-R/RW, MP3, JPEG,
SVCD, VCD2.0, MPEG4,
PAL/NTSC
DVB-T Recciver
Frequency
Subtitle support
Teltext support
Program scan
infrared
5m
30¡ã (horizontal)
2 x 1.5 V, size AAA
55 x 117.5 x14 mm
36 g (without batteries)
Note: due to continuing improvements, these technical
specifications are subject to change without notice.
DVD player
Discs and files supported
1.1
2GB (Flash memory)
SD/MMC/MS
2GB (Flash memory)
VHF: 170MHz-230MHz
UHF: 470MHz-860MHz
YES
YES
Auto/Manual
GB-29
Please fill the blank with the model number
of this player for future reference
Model no.: