VTech Go Go Smart Wheels Garage User`s manual

User’s Manual
© 2011 VTech
Printed in China
91-002594-000
INTRODUCTION
Thank you for purchasing the VTech® Go! Go! Smart Wheels Garage
learning toy.
TM
Park, play, and learn with the Go! Go! Smart Wheels Garage from
VTech®. This interactive garage has a spiral ramp, gas station, traffic
stop, elevator, parking pad and helicopter landing pad that provide
pretend-play and learning elements. Additionally, the garage also has
a special sensor that recognizes the included electronic tow truck
and six other Go! Go! Smart Wheels vehicles (sold separately). The
three light-up keys will engage your child as he learns about colors
and the weather.
TM
SPIRAL
RAMP
RECONGNITION
SENSOR
TOW TRUCK
LIGHT-UP
BUTTONS
MODE SELECTOR
GAS STATION
TURNING
DISC
Introduction
TM
ELEVATOR
3
Two spiral ramp tracks
One main unit
One checkpoint sign
One traffic stop
Three helicopter pad pieces
One tow truck
One instruction manual
Included In This Package
INCLUDED IN THIS PACKAGE
One support
4
WARNING: All packing materials, such as tape, plastic sheets,
packaging locks and tags are not part of this toy, and
should be discarded for your child’s safety.
ATTENTION: Pour la sécurité de votre enfant, débarrassez-vous
de tous les produits d’emballage tels que rubans
adhésifs, feuilles de plastique, attaches et étiquettes.
Ils ne font pas partie du jouet.
Please keep this instruction manual as it contains
important information.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back
of the gas station. Use a coin or a
screwdriver to loosen the screw.
3. Install 2 new ‘AA’ (AM-3/LR6) batteries
following the diagram inside the main
unit battery box (a). Install 1 new
‘AA’ (AM-3/LR6) battery following
the diagram inside the tow truck
battery box (b). The use of new
alkaline batteries is recommended for
maximum performance.
Getting Started
Note:
4. Replace the battery cover and tighten
the screw to secure.
BATTERY NOTICE
• The use of new alkaline batteries is recommended for maximum
performance.
• Non-rechargeable batteries are not to be recharged.
5
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
ASSEMBLY INSTRUCTIONS
With the VTech® Go! Go! Smart Wheels Garage safety comes first.
To ensure your child’s safety, adult assembly is required.
TM
Assembly Instructions
• Rechargeable batteries are to be removed from the toy before being
charged (if removable).
• Rechargeable batteries are only to be charged under adult
supervision (if removable).
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbonzinc) or rechargeable (nickel-cadmium).
• Only batteries of the same or equivalent type as recommended are
to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended
number of power supplies.
• Do not dispose of batteries in fire.
1. Insert the traffic stop into the slot on
the bottom-left of the main unit.
6
2. Insert the checkpoint sign into the slot
on the top-left of the main unit.
4. Put the top spiral ramp track on top of the bottom spiral ramp track,
joining the two tracks in the center (c). Then, twist the top spiral ramp
track to lock it to the bottom spiral ramp track (d). Finally, attach the
assembled spiral ramp to the top and bottom of the main unit (e).
Assembly Instructions
3. Insert the two sides of the helicopter pad into the corresponding
slots on the helicopter pad platform (a). Then, insert the entire
helicopter pad into the corresponding slots on the main unit (b).
5. Insert the support into the slot on
the underside of the turning disc
platform.
7
PRODUCT FEATURES
1. MODE SELECTOR
To turn the unit ON, slide the MODE
SELECTOR to the Learning Mode
(
) or Music Mode position (
).
To turn the unit OFF, slide the MODE
SELECTOR to the OFF position (
).
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech® Go! Go! Smart Wheels
Garage will automatically power-down after approximately 30
seconds without input. The unit can be turned on again by pressing
any button.
TM
ACTIVITIES - GARAGE
1. Slide the mode selector to turn on the
unit. You will hear a sing-along song,
phrase and sounds in Learning Mode.
In Music Mode, you will hear a fun
phrase, a sing-along song and sounds.
The lights will flash with the sounds.
2. Press the three light-up buttons to
learn colors and about the weather in
Learning Mode. In Music Mode, hear
phrases, sounds and melodies. The
lights will flash with sounds.
3. Press the gas station button and
you will hear sounds and phrases in
Learning Mode. You’ll hear sounds,
phrases and melodies in Music Mode.
The lights will flash with the sounds.
Product Features/Activities
8
4. Put a vehicle on the elevator platform.
Move the elevator to learn opposites in
Learning Mode. You’ll hear sounds in
Music Mode. The lights will flash with
the sounds.
6. While a vehicle is on the recognition
sensor, press down or quickly push
the vehicle through the gate to hear a
greeting. The lights will flash with the
sounds.
ACTIVITIES - TOW TRUCK
1.
Slide the ON/OFF SWITCH to the ON
position to turn the unit ON. You will hear a
song, a phrase and sounds. The light will
flash with the sounds.
2.
Press the LIGHT-UP DRIVER BUTTON
to hear vehicle sound effects, a song
and phrases. The light will flash with the
sounds.
Activities
5. Put a vehicle on the turning disc. Turn
the disc to hear sounds, phrases and
sing-along songs in Learning Mode.
Hear sounds, phrases and melodies in
Music Mode. The lights will flash with
the sounds.
9
3.
Push the vehicle to hear fun sounds, a song
and short tunes. While the short tune is
playing, push the vehicle again to stop the
short tune and play it with a faster tempo.
The light will flash with sounds.
MELODY LIST:
1. The Wheels on the Bus
2. Bicycle Built for Two
3. Skip to My Lou
5. The Alphabet Song
6. Bingo
SUNG SONG LYRICS
Sung Song 1:
Roll through the garage,
Come learn and drive around.
Need some gas?
Come and fill ‘er up.
Need to park?
Come and take a rest.
Need to speed?
Roll down the ramp!
Learning picks up speed!
Melody List
4. She’ll Be Coming ‘Round the Mountain
10
Sung Song 3
A-B-C-D,
Obey all the traffic rules.
Look both ways!
Drive safely!
Drive happily!
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
Care & Maintenance/Troubleshooting
Sung Song 2:
Welcome friends,
music is fun!
Listen to the music,
all day long!
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
11
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
For information on this product’s warranty, please call our Consumer
Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697
in Canada.
Creating and developing Infant Learning products is
accompanied by a responsibility that we at VTech® take very
seriously. We make every effort to ensure the accuracy of the
information, which forms the value of our products. However,
errors sometimes can occur. It is important for you to know
that we stand behind our products and encourage you to call
our Consumer Services Department at 1-800-521-2010 in the
U.S., or 1-877-352-8697 in Canada, with any problems and/or
suggestions that you might have. A service representative will
be happy to help you.
Other Info
IMPORTANT NOTE:
NOTE :
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
12
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Caution: changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
Other Info
• Consult the dealer or an experienced radio/TV technician for
help.
13