Channel Plus DA-550HHR Specifications

Linear
—
Audio, Video & Data Solutions
Pre-Wiring Design Guide
High-Definition Video Distribution Components
Audio/Video Distribution Systems
RF Distribution Amplifiers
Audio/Video Modulators
Data, Telephone & Video Distribution Modules
Structured Wire Intercom Components
RF Splitters, Filters & Accessories
Infrared Remote Controls
Structured Wiring Enclosures
Structured Wiring Accessories
1 800 421 1587 / linearcorp.com
Total Access Port Wall Plates
Music Distribution Systems
4-Ohm Speakers
8-Ohm Speakers
Speaker Rough-In Mounting Rings
Audio Wall Plates, Speaker & Volume Controls
Audio/Video Distribution Accessories
Application Diagrams
Reference Section
Glossary of Terms
Linear Audio / Video / Data Solutions
Linear Audio / Video / Data Solutions
An
Innovative
History
Linear was established in 1961 as a manufacturer of radio controls. Over the next four decades, an
unrelenting dedication to quality has turned it into the most trusted name in everyday technology.
Long known for pioneering radio frequency in everyday use, Linear now combines passive
infrared detection, digital electronics, and human engineering for a full range of products.
Today, Linear opens your gates, your garages, and your front doors. You walk through
Linear. You talk through Linear. You trust Linear every day.
Linear’s prevalence across America is simply unprecedented. Hundreds of thousands of
people use Linear products every day without even knowing it. Backed by the industry’s
best warranties, a network of qualified integrators and installers, and unrivaled electronic
solutions know-how, it’s no wonder that Linear continues to lead the industry forward.
Linear combines the latest in technology with simplicity and elegance. From gate
operators to intercom systems to high-definition video distribution, these are innovations
that are designed to make your life easier. These are innovations that make your life better.
Linear Audio / Video / Data Solutions
Linear Audio / Video / Data Solutions
Order Info
Sales Department:
5:00 AM — 4:30 PM (Pacific Time) Monday through Friday.
By Phone:
By Fax:
By Web:
By Email:
1 800 421 1587
1 800 468 1340
linearcorp.com
sales@linearcorp.com
Technical Support for Dealers & Installers:
5:00 AM — 4:30 PM (Pacific Time) Monday through Friday.
By Phone:
By Fax:
By Web:
By Email:
1 800 421 1587
1 760 438 7199
linearcorp.com
techsupport@linearcorp.com
These Linear products are available nationwide at hundreds of conveniently located local
distributor branches. These innovative products are available where you need them and
when you need them, making Linear the natural choice for your audio/video/data solutions.
Linear Audio / Video / Data products are distributed by:
All these brands are now under the Linear name.
Linear Audio / Video / Data Solutions
Linear Audio / Video / Data Solutions 01
Contents
Pre-Wiring Design Guide
02 – 05
High-Definition Video Distribution Components
06 – 13
Audio/Video Distribution Systems
14 – 14
RF Distribution Amplifiers
15 – 17
Audio/Video Modulators
18 – 24
Data, Telephone & Video Distribution Modules
25 – 28
Structured Wire Intercom Components
29 – 32
RF Splitters, Filters & Accessories
33 – 35
Infrared Remote Controls
36 – 37
Structured Wiring Enclosures
38 – 40
Structured Wiring Accessories
41 – 42
Total Access Port Wall Plates
43 – 43
Music Distribution Systems
44 – 49
4-Ohm Speakers
50 – 50
8-Ohm Speakers
51 – 58
Speaker Rough-In Mounting Rings
59 – 59
Audio Wall Plates, Speaker & Volume Controls
60 – 61
Audio/Video Distribution Accessories
62 – 62
Application Diagrams
63 – 72
Reference Section
73 – 75
Glossary of Terms
76 – 76
Linear Training
77 – 77
Technical Support
78 – 78
Manufacturing Facilities
79 – 79
Distribution Centers
80 – 80
Index
81 – 81
Linear Audio / Video / Data Solutions
02 Pre-Wiring Guide
Structured Wiring with Industry-Standard Cabling
Today’s installations requirements demand multi-room audio/video
entertainment and networking of telephone, Ethernet, intercom, RF
television signals, digital whole-house music, video surveillance,
and more. The key to an efficient and successful audio/video/data
installation is to pre-wire using a system.
A structured wiring system is comprised of a network enclosure
containing electronic modules that attach to a mounting grid. Cables
route signals entering into the installation to the modules in the
enclosure. From the modules, cables exit the enclosure and route to
multi-function wall plates in each room of the installation.
CABLE RUNS RECOMMENDED BY LOCATION
TYPICAL ROOM
MEDIA CENTER
HOME OFFICE
GOOD
1 CAT-5, 1 RG-6
1 CAT-5, 3 RG-6
1 CAT-5, 2 RG-6
BETTER
2 CAT-5, 1 RG-6
2 CAT-5, 3 RG-6
2 CAT-5, 2 RG-6
BEST
2 CAT-5, 2 RG-6
3 CAT-5, 3 RG-6
3 CAT-5, 3 RG-6
RG-6 COAX CABLE
One of the advantages of a structured wiring system is the flexibility
offered to the homeowner by providing multiple interface jacks in
every room throughout the residence. Another advantage is the
“home run” routing of cables. Each wall plate has its own individual
cable set routed back to the network enclosure. This allows
flexibility when changing or adding services, easy troubleshooting,
and a very high-quality signal path.
Installing the cables in the walls before the construction is
completed allows the easy wiring access to all points in
the residence.
Cable Types and Usage
Another important feature of Linear’s audio/video/data solution
products is the easy assembly of an integrated home network
utilizing. The cable types listed here are available from a wide variety
of manufacturers, ensuring competitive prices, availability, and
compatibility, now and in the future.
CAT-5 CONNECTION TO TAP WALL PLATE
RG-6
RF sources like CATV, off-air NTSC, and off-air ATSC (HDTV) use
RG-6 coax with standard foil shield and aluminum braid. For DBS
satellite installations—from dish, to multi-switch, to receiver—
use standard RG-6. It is perfect for most residential situations. In
commercial or extreme noise environments (such as near a radio or
television transmitter tower), use quad-shielded RG-6.
Cat-5, Cat-5e, and Cat-6
Category 5, Category 5e (100 MHz rated), or even better, Category 6
(200 MHz rated) is recommended for telecommunication, intercom,
Ethernet, and data applications. Category 5 (or higher) wiring has
four unshielded twisted pairs (UTP) for eight wires total. It’s reliable
because of its tight accurate twist of wire pairs and the balanced
mode of transmission. This design results in a cable that resists
interference from common sources in the home, such as vacuums,
microwave ovens, and power tools.
CAT-5 DATA TERMINATION
The TIA/EIA-570-A standard specifies that the length of each Cat-5
cable run should not exceed 295 ft. This guideline should determine
where the network enclosure is located. In most homes, this length
restriction is not an issue.
Access Port Recommendations
Linear’s Total Access Port™ wall plates provide an easy way to
terminate the installation’s cables at each interface jack location.
For future expansion and addition of upgrades, it is always good
practice to run extra cables. It is recommended that an extra data
and coaxial cable is available at each wall plate location.
linearcorp.com / 1 800 421 1587
CAT-5 TELEPHONE PAIRS
Linear Audio / Video / Data Solutions
Pre-Wiring Guide 03
Pre-Wire for Direct Broadcast Satellite, Cable,
and Off-Air High-Definition Digital Television with RG-6 Coax
OFF-AIR
DTV ANTENNA
DBS
DISH
Using RG-6 white and black coaxial
cable, install the following cable runs
from the network enclosure:
t0OFCMBDLDBCMFUPFBDI57MPDBUJPO
t0OFXIJUFDBCMFUPFBDIWJEFP source location (DVRs, DBS satellite
receivers, DVD players, cameras,
computers, and gaming boxes).
t0OFXIJUFDBCMFUPUIF$"57
demarcation point.
t0OFXIJUFDBCMFUPan off-air DTV
antenna location.
t'PVSXIJUFDBCMFTUPBQMBDFXIFSFB
satellite dish with a multi LNB might
be mounted.
cable: coaxial cable type RG-6 75Ω
connectors: type F
applications: CATV, DTV antenna, and
DBS satellite
Cable Jacket Color Coding
white RG-6 coax: use as a “send” or
“upstream” cable from modulators to
distribution panel
black RG-6 coax: use as “receive” or
“downstream” cable from distribution
panel to TVs
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
04 Pre-Wiring Guide
Pre-Wire Telephone, Intercom, and Digital Whole-House Audio,
with Cat-5, Cat-5e, or Cat-6
TELEPHONE
INTERCOM
Using white, purple, yellow, or orange
Category 5 or Category 6 cable, install
the following cable runs from the
network enclosure:
WHOLE-HOUSE
DIGITAL AUDIO
CONTROLLER
tOne white cable to each telephone
jack location.
t0OFQVSQMFDBCMFUPFBDI
whole-house digital audio controller
keypad location.
t0OFPSBOHFDBCMFUPFBDIJOUFSDPN
station location.
tOne yellow cable to the telephone
company’s demarcation point.
cable: Category 5, 5e or Category 6
connectors: jacks and plugs type
RJ-11 (1 pair), type RJ-14 (2 pair), type
RJ-25 (3 pair), and RJ-45 (4 pair)
applications: telephone, fax,
computer modem, intercom,
whole-house audio
Cable Jacket Color Coding
white: telephone
purple: digital audio
orange: analog audio
yellow: telco line in
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Pre-Wiring Guide 05
Pre-Wire Ethernet Data Network and Internet Access
with Cat-5e or Cat-6
TOTAL ACCESS PORT
WALL PLATE
Using blue or yellow Category 5e or
Category 6 cable, install the following
cable runs from the network enclosure:
t0OFCMVFDBCMFUPFBDIDPNQVUFS
location.
t0OFCMVFDBCMFUPFBDIDPNQVUFS
peripheral location (such as a printer)
t0OFCMVFDBCMFUPBOZMPDBUJPOXIFSF
an Ethernet access wall plate is
desired (kitchen, bedroom, or den).
t0OFCMVFDBCMFUPBOZ&UIFSOFU
capable video-on-demand DVR or
set-top box.
t0OFZFMMPXDBCMFUP%4-PSDBCMF
modem location.
cable: Category 5e or Category 6
connectors: jacks and plugs type RJ-45
(4 pair)
applications: 100 BASE-T Ethernet for
computer networking and printer
sharing, Internet access from ISP.
Cable Jacket Color Coding
blue: data
yellow: ISP connection
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
06 High-Definition Video Distribution Components
HDMI-SW-2X2M
DVRs, HD-DVD players, Blu-ray Disc players, and other sources
with an HDMI output. By using the IR remote, either source is
accessible at all times. Simply connect all your sources to the
switcher’s HDMI inputs. Then connect up to two displays on the
switcher’s HDMI outputs. Once the sources, the switcher, and
the display(s) are powered and connected, you simply select
which source you want to view using the IR remote. Includes
5-VDC power supply (regulatory approvals include UL and CE),
RMT-2IR Remote Control, and two 6-ft. Mono-Lok HDMI cables.
2x2 Switcher/Splitter for HDMI (Mirrored)
t ORDER # HDMI-SW-2X2M
Features:
t Switches easily between any two HDMI sources
t Outputs are mirrored to two HDMI displays simultaneously
t Additional digital optical audio output is extracted from the HDMI input
for easy connection to multi-channel A/V receivers
t Extends the range of HDMI-compliant device by equalizing and
reclocking the HDMI signal
t Supports resolutions up to 1080p, 2K, and 1920x1200
t HDMI/HDCP compliant
SWITCH BETWEEN ANY TWO HDMI SOURCES AND OUTPUT
TO TWO DISPLAYS. The Model HDMI-SW-2X2M 2x2 Switcher
for HDMI (Mirrored) routes high-definition video in multiple resolutions
up to 1080p plus multi-channel digital audio from either one of
two sources to the two displays. Two outputs give you the option
of sending high-definition audio and video signals to two displays
simultaneously. A digital audio output port is available if you need
to direct the audio to an A/V receiver. The 2x2 Switcher for HDMI
eliminates the need to disconnect and reconnect sources to a
display equipped with one input. It supports HDMI-compatible
equipment such as HD cable and HD satellite set-top boxes, HD
Specifications:
HDMI-SW-2X4M
Simply connect all your sources to the switcher’s HDMI inputs.
Then connect up to four displays to the switcher’s HDMI outputs.
Once the sources, the switcher, and the display(s) are powered
and connected, you simply select which source you want to view
using the IR remote. Includes 5-VDC power supply (regulatory
approvals include UL and CE), RMT-2IR Remote Control, and
two 6-ft. Mono-Lok HDMI cables.
2x4 Switcher/Splitter for HDMI (Mirrored)
t ORDER # HDMI-SW-2X4M
t Video amplifier bandwidth: 165 MHz
t Input video signal: 1.2 volts p-p
t Input DDC signal: 5 volts p-p (TTL)
t Single link range: 1080p/1920x1200
t HDMI connector: Type A 19-pin female
t Digital audio output: Optical
t Remote control port: RS232 female, external IR mini-stereo jack
t Power consumption: 20 watts (max)
t Dimensions: 10.25” W x 1.125” H x 4.25” D
t Shipping weight: 4 lbs.
Features:
t Switches easily between any two HDMI sources
t Outputs are mirrored to four HDMI displays simultaneously
t Extends the range of HDMI-compliant device by equalizing and reclocking the HDMI signal
t Supports resolutions up to 1080p, 2K, and 1920x1200
t HDMI/HDCP compliant
Specifications:
SWITCH BETWEEN ANY TWO HDMI SOURCES AND OUTPUT
TO FOUR DISPLAYS. The Model HDMI-SW-2X4M 2x4 Switcher/
Splitter for HDMI (Mirrored) is equipped with two HDMI inputs
and four HDMI outputs. Two inputs accommodate the simultaneous
connection of up to two high-definition video sources. It supports
HDMI-compatible equipment such as HD cable and HD satellite
set-top boxes, HD DVRs, HD-DVD players, Blu-ray Disc players,
and other sources with an HDMI output. Four outputs send the
high-definition audio/video signals to up to four high-definition
displays. Switching is done via the IR remote that is provided
with the unit.
t Video amplifier bandwidth: 165 MHz
t Input video signal: 1.2 volts p-p
t Input DDC Signal: 5 volts p-p (TTL)
t Single link range: 1080p/1920x1200
t HDMI connector: Type A 19-pin female
t Remote control port: RS232 female, mini-stereo
t Power consumption: 10 watts (max)
t Dimensions: 12 W” x 1.125” H x 4.25” D
t Shipping weight: 4 lbs.
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
High-Definition Video Distribution Components 07
HDMI-SW-3X1
output. The output sends the high-definition audio/video signals
to a high-definition display. Switching is done via the IR remote
that is provided with the unit.
3x1 Switcher for HDMI 1.3
t ORDER # HDMI-SW-3X1
Simply connect all your sources to the switcher’s HDMI inputs.
Then connect your display to the switcher’s HDMI output. Once
the sources, the switcher, and the display are powered and
connected, you simply select which source you want to view
using the IR remote or the select button on the front panel.
Includes 5-VDC power supply (regulatory approvals include UL
and CE), RMT-3 IR Remote Control, and three 6-ft. Mono-Lok
HDMI cables.
Features:
t Switches easily between any three HDMI sources
t Discrete pushbutton for local switching
t Extends the range of HDMI-compliant devices by equalizing the HDMI signal
t Maintains high-resolution video beautifully, with sharp HDTV resolutions
up to 1080p and 2K and computer resolutions up to 1920x1200
t HDMI 1.3/HDCP compliant
CONNECT THREE HDMI-COMPLIANT DEVICES TO ONE DISPLAY.
The Model HDMI-SW-3X1 3x1 Switcher for HDMI 1.3 allows
you to enjoy the benefits of HDMI 1.3 while connecting multiple
sources to one display. Linear’s HDMI 3x1 switcher routes three
high-definition video signals with multi-channel digital audio to one
display with resolutions up to 1080p. Three inputs accommodate
the simultaneous connection of up to three HDMI 1.3 high-definition
video sources. It supports HDMI-compatible equipment such
as HD cable and HD satellite set-top boxes, HD DVRs, HD-DVD
players, Blu-ray Disc players, and other sources with an HDMI
HDMI-SW-4X1
Specifications:
t Single link bandwidth: 225 MHz
t Input video signal: 1.2 volts p-p
t Input DDC signal: 5 volts p-p (TTL)
t Single link range: 1080p/1920x1200
t HDMI connector: Type A 19-pin female
t Remote control port: Mini-stereo jack
t Power consumption: 5 watts (max)
t Dimensions: 9.25” W x 1” H x 2.75” D
t Shipping weight: 4 lbs.
Simply connect all your sources to the switcher’s HDMI inputs.
Then connect your display to the switcher’s HDMI output. Once
the sources, the switcher, and the display(s) are powered and
connected, you simply select which source you want to view
using the IR remote. Includes 5-VDC power supply (regulatory
approvals include UL and CE), RMT-4IR Remote Control, and four
6-ft. Mono-Lok HDMI cables.
4x1 Switcher for HDMI 1.3
t ORDER # HDMI-SW-4X1
Features:
t Switches easily between any four HDMI sources
t Extends the range of HDMI-compliant devices by equalizing the HDMI signal
t Supports resolutions up to 1080p, 2K, and 1920x1200
t HDMI 1.3/HDCP compliant
Specifications:
ROUTE FOUR HDMI SOURCES TO ONE DISPLAY.
The Model HDMI-SW-4X1 4x1 Switcher for HDMI 1.3 routes
high-definition video in multiple resolutions up to 1080p plus
multi-channel digital audio from any of four sources to one display.
Four HDMI inputs accommodate the simultaneous connection of up
to four high-definition video sources. It supports HDMI-compatible
equipment such as HD cable and HD satellite set-top boxes, HD
DVRs, HD-DVD players, Blu-ray Disc players, and other sources
with an HDMI output. The output sends the high-definition audio/
video signals to a high-definition display. Switching is done via
the IR remote that is provided with the unit.
t Video amplifier bandwidth: 340 MHz
t Input video signal: 1.2 volts p-p
t Input DDC signal: 5 volts p-p (TTL)
t Single link range: 1080p/1920x1200
t HDMI connector: Type A 19-pin female
t Remote control port: RS232 female, mini-stereo jack
t Power consumption: 10 watts (max)
t Dimensions: 13.25” W x 1” H x 2.75” D
t Shipping weight: 6 lbs.
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
08 High-Definition Video Distribution Components
HDMI-SW-4X2M
an audio receiver. Switching is done via the IR remote that is
provided with the unit. You simply connect all your sources to
the switcher’s HDMI inputs. Then connect up to two displays on
the switcher’s HDMI outputs. Once the sources, the switcher,
and the display(s) are powered and connected, you simply select
which source you want to view using the IR remote. Includes
5-VDC power supply (regulatory approvals include UL and CE),
RMT-4IR Remote Control, and four 6-ft. Mono-Lok HDMI cables.
4x2 Switcher for HDMI (Mirrored)
t ORDER # HDMI-SW-4X2M
Features:
t Switches easily between any four HDMI sources
t Outputs are mirrored to two HDMI displays simultaneously
t Additional digital coax audio output is extracted from the HDMI input for
easy connection to a multi-channel audio receiver
t Extends the range of HDMI-compliant devices by equalizing and reclocking
the HDMI signal
t Supports resolutions up to 1080p, 2K, and 1920x1200
t HDMI/HDCP compliant
Specifications:
ACCESS UP TO FOUR SOURCES FROM ONE OR TWO DISPLAYS.
The Model HDMI-SW-4X2M 4x2 Switcher for HDMI (Mirrored)
routes high-definition video in multiple resolutions up to 1080p
plus multi-channel digital audio from any of four sources. Four
inputs accommodate the simultaneous connection of up to
four high-definition video sources. It supports HDMI-compatible
equipment such as HD cable and HD satellite set-top boxes, HD
DVRs, HD-DVD players, Blu-ray Disc players, and other sources
with an HDMI output. Two outputs send the high-definition audio/
video signals to up to two high-definition displays. A digital
audio output port is available if you need to direct the audio to
t Video amplifier bandwidth: 165 MHz
t Input video signal: 1.2 volts p-p
t Input DDC signal: 5 volts p-p (TTL)
t Single link range: 1080p/1920x1200
t HDMI connector: Type A 19-pin female
t Digital audio output: SPDIF
t Remote control port: RS232 female, mini-stereo
t Power consumption: 20 watts (max)
t Dimensions: 11” W x 1.25” H x 4.25” D
t Shipping weight: 5 lbs.
COMP-DA-1X3 1:3 Component
Simply connect the source’s component and audio cables to the
1:3’s input. Then connect up to three component displays to the
1:3’s outputs. Power on the unit and watch high-definition up to
1080p on up to three displays without any signal loss or picture
degradation. When two or more 1:3s are connected together,
you can create a larger video distribution system. Includes 5-VDC
power supply (regulatory approvals include UL and CE) and one
6-ft. component cable.
with Audio Distribution Amplifier
t ORDER # COMP-DA-1X3
Features:
t Connects up to three component displays at the same time to one video source
t Supports HDTV (Component, YPbPr, RGsB) and SD (Composite, YCbCr)
input signals
t Supports HDTV resolutions up to 1080p
t Both analog and digital audio outputs are active
Specifications:
DISTRIBUTE ONE COMPONENT SOURCE TO THREE DISPLAYS.
The Model COMP-DA-1X3 1:3 Component with Audio Distribution
Amplifier is the perfect solution for anyone who needs to send
one source of high-definition component video and analog or
digital audio to multiple displays at the same time. It supports
component equipment, such as DVD players, satellite set-top
boxes, and all component displays. In operation, the component
video source is connected to the distribution amplifier at the input.
Three outputs are available to be used in part or in full. Once the
unit is connected and powered, the source is distributed to three
component high-definition displays at the same time.
t Input: YPbPr x1 or RGsB x1 (or RGBHV), or Composite x1 1V p-p @ 75 Ohm
t Output: YPbPr x3, or RGsB (or RGBHV) x3, or Composite x3
t Audio input: Digital (SPDIF) x1 + R/L x1
t Audio output: Digital (SPDIF) x3 + R/L x3
t Analog audio input/output: Audio 2V rms max 47k Ohm
t Bandwidth: 480 MHz (-3dB)
t Video range: 480i, 480p, 720p, 1080i, and 1080p
t Dimensions: 5.5” W x 1.5” H x 3.65” D
t Shipping weight: 3 lbs.
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
High-Definition Video Distribution Components 09
COMP-DA-1X8
Simply connect the source’s component and audio cables to the
1:8’s input. Then connect up to eight component displays to the
1:8’s outputs. Power on the unit and watch high-definition up to
1080p on up to eight displays without any signal loss or picture
degradation. When two or more 1:8s are connected together,
you can create a larger video distribution system. Includes 5-VDC
power supply (regulatory approvals include UL and CE), one 6-ft.
5-RCA Component/R+L cable, and rack ears.
1:8 Component with Audio
Distribution Amplifier
t ORDER # COMP-DA-1X8
Features:
t Connects up to eight component displays at the same time to one
video source
t Supports HDTV (Component, YPbPr, RGsB) and SD (Composite, YCbCr)
input signals
t Supports HDTV resolutions up to 1080p
t Both analog and digital audio outputs are active
Specifications:
DISTRIBUTE ONE COMPONENT SOURCE TO EIGHT DISPLAYS.
The Model COMP-DA-1X8 1:8 Component with Audio Distribution
Amplifier is the perfect solution for anyone who needs to send
one source of high-definition component video and analog or
digital audio to multiple displays at the same time. It supports
component equipment, such as DVD players, satellite set-top boxes,
and component displays. In operation, the component video source
is connected to the distribution amplifier at the input. Eight outputs
are available to be used in part or in full. Once the unit is connected
and powered, the source is distributed to eight component highdefinition displays at the same time.
HDMI-DA-1X8
t Input: YPbPr x1 or RGsB x1 (or RGBHV), or Composite x1 1V p-p @ 75 Ohm
t Output: YPbPr x8, or RGsB (or RGBHV) x8, or Composite x8
t Audio input: Digital (SPDIF) x1 + R/L x1
t Audio output: Digital (SPDIF) x8 + R/L x8
t Analog audio input/output: Audio 2V rms max 47k Ohm
t Bandwidth: 480 MHz (-3dB)
t Video range: 480i, 480p, 720p, 1080i, and 1080p
t Dimensions: 17.5” W x 1.75” H x 6.75” D
t Rack mountable: 1U rack space
t Shipping weight: 8 lbs.
Simply connect your HDMI video source to the 1:8 Distribution
Amplifier’s input using the supplied HDMI cable. Then connect
up to eight HDMI displays to the unit’s eight HDMI outputs. Once
connected and powered, your source can be seen on all eight
displays at the same time. When two or more 1:8s are connected
together, you can create a larger distribution system. Includes
24-VDC power supply (regulatory approvals include UL and CE),
one 6-ft. HDMI cable, and rack ears.
1:8 Distribution Amplifier for HDMI
t ORDER # HDMI-DA-1X8
Features:
t Connects up to eight HDMI/DVI* displays at the same time to one
video source
t Output is mirrored to eight HDMI/DVI* displays simultaneously
t Supports resolutions up to 1080p, 2K, and 1920x1200
t Extends the range of HDMI-compliant devices by equalizing and
reclocking the HDMI signal
t HDMI/HDCP compliant
*When used with an HDMI to DVI Adapter
DISTRIBUTE ONE HDMI SOURCE TO UP TO EIGHT DISPLAYS.
The Model HDMI-DA-1X8 1:8 Distribution Amplifier for HDMI is
the perfect solution for anyone who needs to send one source of
digital high-definition video to multiple displays at the same time.
It supports HDMI-compatible equipment such as HD cable and
HD satellite set-top boxes, HD DVRs, HD-DVD players, Blu-ray
Disc players, and other sources with an HDMI output. In operation,
the digital video source is connected to the distribution amplifier’s
one input while eight HDMI outputs are available to be used in
part or in full. Once the unit is connected and powered, your source
can be distributed to up to eight digital displays at the same time.
Specifications:
t Video amplifier bandwidth: 165 MHz
t Input video signal: 1.2 volts p-p
t Input DDC signal: 5 volts p-p (TTL)
t Single link range: 1080p/1920x1200
t HDMI connector: Type A 19-pin female
t Power consumption: 60 watts (max)
t Dimensions: 17” W x 1.75” H x 5.5” D
t Rack mountable: 1U rack space
t Shipping weight: 6 lbs.
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
10 High-Definition Video Distribution Components
HDMI-DA-2X8M
2:8 Distribution Amplifier for HDMI (Mirrored)
t ORDER # HDMI-DA-2X8
Simply connect your two HDMI video sources to the 2:8 HDMI
Distribution Amplifier. Then connect up to eight HDMI displays
to the unit’s eight HDMI outputs. Once connected and powered,
your source will be seen on all eight displays at the same time.
When two or more 2:8s are connected together, you can create
larger distribution systems. Includes 24-VDC power supply
(regulatory approvals include UL and CE), one 6-ft. Mono-Lok
HDMI cable, RMT-2IR Remote Control, and rack ears.
Features:
t Switches easily between any two HDMI/DVI* sources
t Outputs are mirrored to eight HDMI/DVI* displays simultaneously
t Supports resolutions up to 1080p, 2K, and 1920x1200
t Extends the range of HDMI-compliant devices by equalizing and
reclocking the HDMI signal
t HDMI/HDCP compliant
*When used with an HDMI to DVI Adapter
Specifications:
DISTRIBUTE TWO HDMI SOURCES TO EIGHT HDMI DISPLAYS.
The Model HDMI-DA-2X8M 2:8 Distribution Amplifier for HDMI
(Mirrored) is the perfect solution for anyone who needs to send
one or two sources of digital high-definition video to multiple displays
at the same time. It supports HDMI-compatible equipment such
as HD cable and HD satellite set-top boxes, HD DVRs, HD-DVD
players, Blu-ray Disc players, and other sources with an HDMI
output. In operation, the digital source is connected to the distribution
amplifier’s input while eight HDMI outputs are available to be used
in part or in full. Once the unit is connected and powered, your source
can be distributed to up to eight digital displays at the same time.
HDMI-MX-4X4
t Video amplifier bandwidth: 165 MHz
t Input video signal: 1.2 volts p-p
t Input DDC signal: 5 volts p-p (TTL)
t Single link range: 1080p/1920x1200
t HDMI connector: Type A 19-pin female
t Remote control port: RJ11 jack for serial control
interface, external IR mini-stereo jack
t Power consumption: 60 watts (max)
t Dimensions: 17” W x 1.75” H x 5.5” D
t Rack mountable: 1U rack space
t Shipping weight: 5 lbs.
Simply connect the sources to the Matrix’s HDMI inputs. Then
connect four displays to the Matrix’s outputs. Once the sources,
the Matrix, and the displays are powered and connected,
you use the IR remote to select which sources you want to view
on which displays. Includes 24-VDC power supply (regulatory
approvals include UL and CE), RMT-16IR Remote Control, four
6-ft. Mono-Lok HDMI cables, and rack ears.
4x4 Matrix for HDMI
t ORDER # HDMI-MX-4X4
Features:
t Switches easily between any four HDMI sources
t Distributes any of the four inputs to any combination of the four
HDMI output displays
t Supports resolutions up to 1080p, 2K, and 1920x1200
t Extends the range of HDMI-compliant devices by equalizing and
reclocking the HDMI signal
t HDMI/HDCP compliant
Specifications:
VIEW ANY FOUR HDMI SOURCES ON ANY FOUR DISPLAYS.
The Model HDMI-MX-4X4 4x4 Matrix for HDMI allows maximum
versatility and flexibility for creating an integrated HD system.
The 4x4 Matrix routes digital audio and high-definition digital
video in resolutions up to 1080p from any of four HDMI sources
to any combination of four displays through the matrix. It supports
HDMI-compatible equipment such as HD cable and HD satellite
set-top boxes, HD DVRs, HD-DVD players, Blu-ray Disc players,
and other sources with an HDMI output. Each source is accessible
for viewing on any combination of displays by selecting it with
the supplied IR remote.
t Video amplifier bandwidth: 165 MHz
t Input video signal: 1.2 volts p-p
t Input DDC signal: 5 volts p-p (TTL)
t Single link range: 1080p/1920x1200
t HDMI connector: Type A 19-pin female
t Remote control port: RS232 female, external IR mini-stereo jack
t Power consumption: 60 watts (max)
t Dimensions: 17” W x 1.75” H x 5.875” D
t Rack mountable: 1U rack space
t Shipping weight: 7 lbs.
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
High-Definition Video Distribution Components 11
COMP-CAT5-EXT
The Component with Audio Extender sender unit connects to
any component video and audio source using the supplied
component and RCA cables. The receiver unit connects to your
HDTV component video display and audio input up to 1,000 feet
away. Only one Cat-5, Cat-5e, or Cat-6 cable is used to connect
the sender to receiver for perfect video extension up to 1080p.
The sender and receiver are powered by individual 5-VDC power
supplies. Includes two 5-VDC power supplies (regulatory approvals include UL and CE), one 6-ft. component cable, and one
2 RCA L+R audio cable.
Component with Audio Extender
(Sender and Receiver)
t ORDER # COMP-CAT5-EXT
Features:
t Supports HDTV resolutions up to 1080p
t Supports analog L+R audio and multi-channel digital audio (SPDIF or Optical)
t No loss of quality
t Plug-and-play installation
t Equalization for Cat-5 signal skews
t Only one Cat-5, Cat-5e, Cat-6 cable is required
t Both analog and digital audio outputs are active on the receiver side
Specifications:
EXTENDS COMPONENT VIDEO AND AUDIO UP TO 1,000 FEET
(300 METERS) OVER A SINGLE CAT-5, CAT-5E, OR CAT-6 CABLE.
The Model COMP-CAT5-EXT Component with Audio Extender
(Sender and Receiver) extends your audio and video signals with
Cat-5 cable. Place your source anywhere and extend the signal
up to 1,000 feet away. The Component with Audio Extender will
extend Analog Component as well as Analog Audio or Digital Audio
(SPDIF or Optical). All audio and video signals are transmitted digitally
over a single Cat-5, Cat-5e, or Cat-6 cable, and both the analog
and digital audio outputs are active on the receiver side.
COMP-2-HDMI-AD
Component with Audio to HDMI Adapter
t ORDER # COMP-2-HDMI-AD
t Video amplifier bandwidth: 350 MHz
t Input video signal: 1.2 volts p-p
t Input sync signal: 5 volts p-p (TTL)
t Horizontal frequency range: 15–70 KHz
t Vertical frequency range: 30–170 Hz
t Video in/out: 3 RCA component
t Audio in/out: 2 RCA audio, one SPDIF, one Optical
t Link connector: RJ-45 shielded
t Power consumption: 5 watts (max.)
t Dimensions: 3” W x 1” H x 3.75” D
t Shipping weight: 4 lbs.
Simply connect the supplied component cable to the input side
of the Component with Audio to HDMI Adapter. Connect the
supplied RCA audio cables to the audio inputs of the Component
with Audio to HDMI Adapter. Connect the HDMI display or projector
input to the HDMI output of the Component with Audio to HDMI
Adapter. The adapter generates the compatible analog to digital
conversion signals for video and audio as well as encoding the
audio onto the HDMI to make the connection between the analog
inputs and the digital output work. Includes 5-VDC power supply
(regulatory approvals include UL and CE), one 6-ft. RCA L+R
audio cable, and one 6-ft. component cable.
Features:
t Allows you to connect your HDTV YPbPr source to an HDMI input
t Encodes analog audio onto the video signal for HDMI video and audio
t Supports HDTV resolution up to 1080p
t HDMI compliant
Specifications:
CONVERT COMPONENT VIDEO WITH AUDIO TO HDMI FOR
DIGITAL DISPLAYS. The Model COMP-2-HDMI-AD Component
with Audio to HDMI Adapter is a unique device that allows older
analog devices to be integrated seamlessly into the modern
home theater. This adapter connects component video home
theater devices to HDMI-compliant digital monitors. This adapter
also takes analog L+R audio and encodes it onto the HDMI signal
for the full DMI video and audio effect. With the Component
with Audio to HDMI Adapter, Legacy home theater devices and
computer systems can be easily connected to any HDMI display
for the full digital video and audio experience.
t Digital video amplifier bandwidth: 165 MHz
t Video amplifier bandwidth: 350 MHz
t Input video signal: 1.2 volts p-p
t Input DDC signal: 5 volts p-p (TTL)
t HDMI connector: Type A 19-pin female
t Video in: 3 RCA component
t Audio connector: Analog RCA L+R
t Power consumption: 10 watts (max)
t Dimensions: 4” W x 1” H x 4” D
t Shipping weight: 3 lbs.
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
12 High-Definition Video Distribution Components
HDMI-SB
Super Booster for HDMI Cables
t ORDER # HDMI-SB
EXTEND HDMI UP TO 200 FEET.
The Model HDMI-SB Super Booster for HDMI Cables is an
attractive alternative to the traditional sender/receiver solutions
for HD extension. The Super Booster for HDMI enables your
standard “off the shelf” certified HDMI cable to transmit HDTV
video plus multi-channel digital audio in a single cable way
beyond the limited HDMI specification of 15 feet.
Up to 200 feet can be easily traversed using your certified HDMI
cable plus a Super Booster for HDMI. The Super Booster for HDMI
corrects any digital degradation that occurs when HDMI is used
to send digital audio/video signals beyond the HDMI specification
of 15 feet.
This plug-and-play installation takes mere seconds. Simply
connect the certified HDMI cable on one side of the Super Booster
for HDMI and the display’s cable on the other side. The Super
Booster for HDMI sits between the end of your certified HDMI
cable and your display. You also have the option of connecting
another certified HDMI cable to the Booster, daisy-chaining
Boosters and cables for greater distances.
Features:
t Perfect digital high-definition video sent over long stretches of
certified HDMI cables
t Locate an HDMI display up to 200 feet away from any HDTV source
t Supports resolutions up to 1080p, 2K, and 1920x1200
t HDMI/HDCP compliant
Specifications:
t Video amplifier bandwidth: 165 MHz
t Input video signal: 1.2 volts p-p
t Input DDC signal: 5 volts p-p (TTL)
t Single link range: 1080p/1920 x 1200
t HDMI connector: Type A 19-pin female
t Source requires 50mA output for maximum performance
t Dimensions: 1.625” W x 0.75” H x 1.75” D
t Shipping weight: 0.5 lb.
IR-EXTENDER
RELOCATE THE IR ON LINEAR HD PRODUCTS.
Remote IR Extender
Features:
t ORDER # IR-EXTENDER
t Adds relocation flexibility to compatible Linear equipment during installation
t Dark-colored, tiny IR Eye module hides easily among equipment and furniture
t IR Extender enables a longer range of control than without the Extender
t Soft and flexible black cable fits in narrow spaces unobtrusively
t Rubber mat under Extender head unit ensures a no-scratch installation
t CFL/Plasma proof
Specifications:
t Connector: 1/8-inch mini-phono plug
t Cable length: 6 ft.
t Dimensions: 2” x 1.4” x 0.8” device, 0.1” diameter cable
t Color: Black
t Shipping weight: 2.1 ounces including cable
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
High-Definition Video Distribution Components 13
SCALER-2-1080P
High-Definition A/V Scaler for HDMI
t ORDER # SCALER-2-1080P
SCALING AND SWITCHING SOLUTION FOR S-VIDEO, COMPOSITE,
COMPONENT, AND HDMI SOURCES.
The Model SCALER-2-1080P High-definition A/V Scaler for
HDMI allows you to upscale and switch your standard definition
or high-definition component and HDMI sources to resolutions
up to 1080p. Anything from set-top boxes and DVD players to
the next generation of gaming consoles can be plugged into the
Linear High-definition A/V Scaler for HDMI.
The Linear High-definition A/V Scaler for HDMI supports one
component source with analog audio, one composite or S-Video
source with analog audio, and two HDMI sources with digital
audio. The analog audio from the analog sources is digitized and
output to the HDMI connection as well as the digital audio outs.
The HDMI inputs also have separate digital audio inputs, so you
can use DVI sources and separate digital audio. The High-definition
A/V Scaler for HDMI will embed the digital audio into the HDMI
output as well as the digital audio outs.
Simply connect all your components and your display. Easyto-use on-screen menus are accessible through the IR remote
control. The IR remote control allows for effortless setup and
image adjustment to accommodate different viewing modes and
screen sizes to perfect your final picture. Includes 5-VDC power
supply (regulatory approvals include UL and CE) and one 6-ft.
Mono-Lok HDMI cable.
Features:
t Both digital and analog inputs are format converted and pixel re-scaled
through the Home Theater Scaler Plus. It outputs a large range of formats
and resolutions that will easily match the native resolution/format of your
display to ensure highest picture quality.
t DVI/HDCP/HDMI-compliant input: Operates up to 165 MHz (up to UXGA @ 60 Hz)
t Supports digital HD output up to 1080p
t Integrated 8-bit triple-ADC/PLL
t Integrated DVI/HDCP/HDMI-compliant receiver
t Dual high-quality scaling engines
t Dual 3-D motion video adaptive de-interlacers with smooth low-angle edge
t Automatic 3:2 pull-down and 2:2 pull-down detection and recovery
t High-performance frame rate conversion engine
t The Proprietary Advanced Color Engine technology gives you brilliant
and fresh color, intensified contrast and details, vivid skin tone, sharp
edges, accurate and independent color control
t Option to select audio input from HDMI or Optical/SPDIF audio source
t 3-D noise reduction on analog inputs only
t Operates through on-screen menu control and remote control
t Aspect ratio control
t Digital audio delay to match audio/video timing
t Less than one frame delay for gaming devices
Specifications:
t Digital video amplifier bandwidth: 165 MHz
t Component video bandwidth: 350 MHz
t Input DDC signal: 5 volts p-p (TTL)
t Input video signal: 1.2 volts p-p
t Single link range: 1080p/1920x1200
t Analog video in connector 1: 3 RCA Component
t Analog video in connector 2: 1 RCA Composite
t Analog video in connector 3: 1 S-Video
t HDMI input connector: 2 Type A 19-pin female
t HDMI output connector: 1 Type A 19-pin female
t Digital audio in connector: 2 Optical TOSLINK and 2 Coaxial SPDIF
t Digital audio out connector: 1 Optical TOSLINK and 1 Coaxial SPDIF
t Analog audio in connector: 3:2 RCA R+L
t Power consumption: 20 watts (max)
t Dimensions: 6.875” W x 2.125” H x 6.875” D
t Shipping weight: 4 lbs.
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
14 Audio/Video Distribution Systems
SVC-10
S-Video Cat-5 Distribution System
with 12-Volt IR
t ORDER # SVC-10
Suggested Uses:
t Distribute unconverted audio and video from a music management
system over a single Cat-5 cable
t Provide video and audio access to a distant location such as a pool
house with no ground looping problems or coax required
t Create a cost-effective single-zone audio distribution system with
unlimited power and simplified wiring
t Loop several units together for whole-house distribution
t Deliver high-quality audio and video to box seats in a sports arena
t Access the home theater from a bedroom with full IR remote control
Features:
t S-Video & composite video inputs
t Coax digital, optical digital 5.1, and analog stereo audio inputs
t Auto termination loop-through
t IR emitter and RJ-45 Cat-5 outputs
t 19-Inch rack mountable (one space)
t Automatic optical to coax digital audio conversion
t Adjustable picture compensation for length of wire run
t 17” W x 1.75” H x 6.5” D
SVC-10R
Features:
t ORDER # SVC-10R
t Composite and S-Video outputs
t Coax digital and analog audio outputs
t 12-Volt IR target input
t RJ-45 Cat-5 input
t Compact size: 4.6” W x 1” H x 3.2” D
SVD-8
Suggested Uses:
S-Video Cat-5 Receiver with 12-Volt IR
Distribution Panel with Differential Drive
t ORDER # SVD-8
t The SVD-8 is perfect when you need to send a single source to multiple
locations over a long distance (up to 2,000 ft.)
t Combine SVC-10 and SVD-8 to distribute multiple sources over long
distances such as in schools, training facilities, sports bars, video stores,
or light commercial applications
Features:
t Cat-5 input
t Eight Cat-5 outputs
t Three IR emitter outputs (two mini-jacks, one 2-position terminal block)
t Power and IR indicators
t Cable length adjustment control for each output
t Slide-in labeling system (pre-printed labels provided)
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
RF Distribution Amplifiers 15
DA-520A
The Model DA-520A Bi-directional RF Amplifier provides 20 dB
of gain in a CATV or antenna system. The Model DA-520A has
bi-directional capabilities with a 5–40 MHz bandwidth return
path. This allows compatibility with interactive CATV set-top
boxes. A 12-VDC Model 999-017-01 Power Supply is included.
Bi-Directional RF Amplifier
t ORDER # DA-520A
Features:
t 54 MHz to 1 GHz forward bandwidth
t 5 MHz to 40 MHz reverse bandwidth
t ±1.5 dB gain flatness
t Maximum input level 30 dBmv
t 3.5” W x 1.2” H x 2.5” D
DA-500A
The Model DA-500A RF Amplifier with 18 dB of gain is ideal for
residential cable systems or as an antenna pre-amplifier. The
DA-500A offers a robust power supply and great EMI rejection.
It includes grid mounting ears for the Model 2619 Rack-mount
Grid. The DA-500A is fully compatible with HDTV television
signals.
RF Amplifier
t ORDER # DA-500A
Features:
t 50 MHz to 1 GHz bandwidth
t 18 dB nominal gain
t ±1.5 dB gain flatness
t Maximum input level 40 dBmv
t 6.3” W x 1.25” H x 4.5” D
DA-506BID
input for CATV or an off-air antenna and six outputs for televisions.
Four outputs are for televisions up to 75 feet away and two
outputs can be used up to 150 feet away. The DA-506BID has
bi-directional capabilities with a 5–42 MHz bandwidth return
path on the CATV/antenna input. This allows compatibility with
interactive CATV set-top boxes. Grid mount ears are included for
mounting in the Model 2619 Rack-mount Grid. The DA-506BID
IS compatible with broadcast DTV television signals on the VHF
and UHF bands. The DA-506BID is NOT compatible with digital
or analog CATV signals above 806 MHz (CATV channels 127–140).
Bi-Directional RF Distribution Amplifier
t ORDER # DA-506BID
Features:
The Model DA-506BID Bi-directional RF Distribution Amplifier
creates an ideal entry-level product for broadband distribution.
Encased in an extruded aluminum shell, the Model DA-506BID
meets the needs of small distribution systems that do not require
IR control or modulator inputs. The Model DA-506BID has one
H816BID Bi-Directional Economical
Whole-House Video Distribution Amplifier
t ORDER # H816BID
t 54 MHz to 806 MHz forward bandwidth
t 5 MHz to 42 MHz reverse bandwidth
t 1 dB nominal gain on “short” TV outputs
t 4 dB nominal gain on “long” TV outputs
t ±1.5 dB gain flatness
t Maximum input level 20 dBmv
t 6.3” W x 1.25” H x 4.5” D
signal gain for longer RG-6 coax cable runs. The Model H816BID
is bi-directional to support 2-way cable systems. The H816BID IS
compatible with broadcast DTV television signals on the VHF and
UHF bands. The H816BID is NOT compatible with digital or analog
CATV signals above 806 MHz (CATV channels 127–140).
Features:
The Model H816BID Bi-directional Economical Whole-house
Video Distribution Amplifier distributes CATV or antenna signals
to up to six televisions. Two of the six outputs feature additional
t Distributes CATV or antenna to six TVs
t Four standard outputs with 1 dB gain (for RG-6 coax runs up to 75 feet)
t Two long outputs with 4 dB gain (for RG-6 coax runs up to 150 feet)
t Bi-directional with a 5–42 MHz return path for cable modems, interactive
applications, and pay-per-view boxes
t Six enclosure grid spaces
t 6.25” W x 1.25” H x 2.75” D
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
16 RF Distribution Amplifiers
DA-550BID Bi-Directional RF Distribution
Amplifier with 12-Volt IR
t ORDER # DA-550BID
from NTSC and digital TV. The Model DA-550BID offers a 5–42
MHz bandwidth return path for bi-directional communication for
use with digital cable interactive set-top boxes. The Model DA-550BID
can be powered locally with its included power supply or remotely
from up to 75 feet away by using an in-wall power injector wall
plate Model 2010 or any 5500 series or SVM series modulator.
The Model DA-550BID offers optional IR control of connected video
sources and whole-house IR integration with a built-in 12-volt IR
engine. Adding a Model 2100A Wall Plate and a 12-volt IR target to
the coax run of any room allows IR signals to be routed to either a
Model 2010 Wall Plate, 5500 series, or SVM series modulator.
Features:
The Model DA-550BID Bi-directional RF Distribution Amplifier
with 12-volt IR is the heart of a multi-room distribution system
with outputs to eight televisions with coax runs up to 150 feet.
The Model DA-550BID has three inputs, one from CATV and two
from Linear 5400, 5500, or SVM series modulators. The Model
DA-550BID can handle an extremely wide range of input signals
DA-550HHR High-Headroom RF Distribution
Amplifier with 12-Volt IR
t ORDER # DA-550HHR
t 54 MHz to 1 GHz forward bandwidth
t 5 MHz to 42 MHz reverse bandwidth
t 3 dB nominal gain on TV outputs
t Maximum input level 20 dBmv
t Can be used in locations without electrical access and powered
remotely with a Linear modulator or the Model 2010 Wall Plate
t 6.5” W x 1.25” H x 4.5” D
Linear 5400, 5500, or SVM series modulators. The DA-550HHR
is used with antenna applications for off-air digital and NTSC signals.
The Model DA-550HHR can be powered locally with its included
power supply or remotely from up to 75 feet away by using an
in-wall power injector wall plate Model 2010 or any 5500 series
or SVM series modulator. The Model DA-550HHR offers optional
IR control of connected video sources and whole-house IR integration
with a built-in 12-volt IR engine. Adding a Model 2100A Wall Plate
and a 12-volt IR target to the coax run of any room allows IR
signals to be routed to either a Model 2010 Wall Plate, 5500
series, or SVM series modulator.
Features:
The Model DA-550HHR High-headroom RF Distribution Amplifier with
12-volt IR is the heart of a multi-room distribution system with outputs to
eight televisions with coax runs up to 150 feet. The Model DA-550HHR
has three inputs, one from an off-air antenna or CATV and two from
DA-8200BID Bi-Directional RF Distribution
Amplifier with 5-Volt IR
t ORDER # DA-8200BID
t 54 MHz to 1 GHz forward bandwidth
t 3 dB nominal gain on TV outputs
t Maximum input level 20 dBmv
t Can be used in locations without electrical access and powered
remotely with a Linear modulator or the Model 2010 Wall Plate
t 6.5” W x 1.25” H x 4.5” D
return path for bi-directional communication for use with digital cable
interactive set-top boxes. The Model DA-8200BID can be powered locally
with its included power supply or remotely from up to 75 feet away
by using an in-wall power injector wall plate Model 2010 or any
5500 series or SVM series modulator. The Model DA-8200BID
features optional IR control of connected video sources and wholehouse IR integration with a built-in 5-volt IR engine. Model 2133
Set-top IR Targets connect between the amplifier outputs and
the television sets. IR emitters connected to the amplifier, or to
a 5500 or SVM series IR-enabled modulator connected to the
amplifier, will repeat the IR remote control signals back to the video
source component.
Features:
The Model DA-8200BID Bi-directional RF Distribution Amplifier with
5-volt IR is the heart of a multi-room distribution system with outputs
to eight televisions with coax runs up to 150 feet. The Model
DA-8200BID has three inputs, one from CATV and two from Linear
5400, 5500, or SVM series modulators. The Model DA-8200BID
can handle an extremely wide range of input signals from NTSC
and digital TV. The Model DA-8200BID offers a 5–42 MHz bandwidth
t 54 MHz to 1 GHz forward bandwidth
t 5 MHz to 42 MHz reverse bandwidth
t 3 dB nominal gain on TV outputs
t Maximum input level 20 dBmv
t Can be used in locations without electrical access and powered
remotely with a Linear modulator or the Model 2010 Wall Plate
t 6.5” W x 1.25” H x 4.5” D
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
RF Distribution Amplifiers 17
DA-8200HHR High-Headroom RF Distribution
Amplifier with 5-Volt IR
t ORDER # DA-8200HHR
modulators. The DA-8200HHR is used with antenna applications
for off-air digital and NTSC signals.
The Model DA-8200HHR can be powered locally with its included
power supply or remotely from up to 75 feet away by using an
in-wall power injector wall plate Model 2010 or any 5500 series
or SVM series modulator. The Model DA-8200HHR features optional
IR control of connected video sources and whole-house IR integration
with a built-in 5-volt IR engine. Model 2133 Set-top IR Targets connect
between the amplifier outputs and the television sets. IR emitters
connected to the amplifier, or to a 5500 or SVM series IR-enabled
modulator connected to the amplifier, will repeat the IR remote
control signals back to the video source component.
Features:
The Model DA-8200HHR High-headroom RF Distribution Amplifier
with 5-volt IR is the heart of a multi-room distribution system
with outputs to eight televisions with coax runs up to 150 feet.
The Model DA-8200HHR has three inputs, one from an off-air
antenna or CATV and two from Linear 5400, 5500, or SVM series
H838BID
t 54 MHz to 1 GHz forward bandwidth
t 3 dB nominal gain on TV outputs
t Maximum input level 20 dBmv
t Can be used in locations without electrical access and powered remotely
with a Linear modulator or the Model 2010 Wall Plate
t 6.5” W x 1.25” H x 4.5” D
outputs to eight television locations in the home. In addition, each
has two modulator inputs to add locally generated channels from
DVD players, satellite receivers, VCRs, digital cable boxes, and
front door, back door, and baby room cameras. Every TV location
in the home receives every cable or antenna channel plus every
modulator-generated video channel. In addition, the Model H838BID
has a built-in IR engine that allows infrared remote control of the
video equipment from any TV location. The Model H838BID has
a return path for bi-directional CATV, perfect for use with cable
modems and pay-per-view boxes.
Bi-Directional Video Hub with 5-Volt IR
t ORDER # H838BID
Features:
The Model H838BID Bi-directional Video Hub with 5-volt IR (for
use with cable TV feeds) amplifies the incoming signal and provides
H838HHR
t Distributes CATV to eight TVs
t Two modulator inputs to add locally generated channels (camera or DVD)
t Bi-directional with a 5–42 MHz return path for cable modems, interactive
applications, and pay-per-view boxes
t IR repeating system using 5-volt targets
t Five enclosure grid spaces
t 6.25” W x 3.25” H x 2.25” D
DVD players, satellite receivers, VCRs, digital cable boxes, and
front door, back door, and baby room cameras. Every TV location in
the home receives every cable or antenna channel plus every modulatorgenerated video channel. In addition the Model H838HHR has a
built-in IR engine that allows infrared remote control of the video
equipment from any TV location. The Model H838HHR has a highheadroom amplifier that handles signal differences between highpowered analog VHF and low-powered digital UHF stations. The
Model H838HHR is used with antennas for off-air digital and
analog TV signals.
High-Headroom Video Hub with 5-Volt IR
t ORDER # H838HHR
Features:
The Model H838HHR High-headroom Video Hub with 5-volt IR
(for use with off-air antennas) amplifies the incoming signal and
provides outputs to eight television locations in the home. In addition,
it has two modulator inputs to add locally generated channels from
t Distributes CATV to eight TVs
t Two modulator inputs to add locally generated channels (camera or DVD)
t High-headroom amplifier
t IR repeating system using 5-volt targets
t Antenna isolation compliant with FCC part 15 requirements
t Five enclosure grid spaces
t 6.25” W x 3.25” H x 2.25” D
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
18 Audio/Video Modulators
3015
2-Input Video Distribution System
t ORDER # 3015
The Model 3015 2-input Video Distribution System accepts a
CATV or antenna input and audio/video signals from one video
source and modulates them to a user-selected channel that can
be seen at four TV locations.
The modulator channel is digitally programmed. Push the channel
select button to choose the desired unused TV channel and the
internal microprocessor digitally sets the modulator to the exact
FCC channel specification. The channel setting is retained in
memory during a power failure.
Features:
t All-in-one video distribution system
t Built-in modulator
t Modulator channel digitally programmed
t Programming retained in memory during power failures
t 5.5” W x 6.8” H x 2” D
3025 3-Input Video
Distribution System with 5-Volt IR
t ORDER # 3025
The Model 3025 3-input Video Distribution System with 5-volt IR
accepts a CATV or antenna input and audio/video signals from two
video sources and modulates them to two user-selected channels
that can be seen at five TV locations.
The modulator channels are digitally programmed. Push a
channel select button to choose the desired unused TV channel
and the internal microprocessor digitally sets the modulator to
the exact FCC channel specification. The channel settings are
retained in memory during a power failure.
The Model 3025 features optional IR control of connected video
sources and whole-house IR integration with a built-in 5-volt IR
engine. Model 2133 Set-top IR Targets connect between the
amplifier outputs and the television sets. IR emitters connected
to the amplifier will repeat the IR remote control signals back to
the video source component.
Features:
t All-in-one video distribution system
t Built-in modulators
t Modulator channels digitally programmed
t Programming retained in memory during power failures
t 5.5” W x 6.8” H x 2” D
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Audio/Video Modulators 19
5415
Video and stereo audio inputs are modulated to a programmable
TV channel (stereo audio is converted to monaural audio after
modulation). The Model 5415 Modulator offers video loop-through.
A jumper on the Model 5415 terminates the video input at 75 ohms.
When the jumper is removed, the input can be looped using a “Y”
adapter to feed the video to a local monitor or VCR.
1-Channel Video Modulator
t ORDER # 5415
Features:
The Model 5415 1-channel Video Modulator has the same output
power as the rest of the 5400 series, but it is a quarter of the size.
5425
2-Channel Video Modulator
t ORDER # 5425
t One modulated TV channel
t Creates a TV channel for a camera or other video source
t Channel range: CATV 65–125 (excluding 95–99) and UHF 14–64
t Pushbutton digital programming of modulated channel
t Compatible with DA-8200 and DA-550 series distribution amplifiers
t 4.6” W x 1” H x 3.2” D
The Model 5425 2-channel Video Modulator converts two video
and stereo audio inputs to two programmable TV channels
(stereo audio is converted to monaural audio after modulation).
The Model 5425 Modulator offers video loop-through. Jumpers
on the Model 5425 terminate the video inputs at 75 ohms. When
a jumper is removed, the input can be looped using a “Y” adapter
to feed the video to a local monitor or VCR.
Features:
t Two modulated TV channels
t Creates TV channels for cameras or other video sources
t Channel range: CATV 65–125 (excluding 95–99) and UHF 14–64
t Pushbutton digital programming of modulated channels
t Compatible with DA-8200 and DA-550 series distribution amplifiers
t 7.9” W x 1.5” H x 5.5” D
5435
3-Channel Video Modulator
t ORDER # 5435
The Model 5435 3-channel Video Modulator converts three video
and stereo audio inputs to three programmable TV channels (stereo
audio is converted to monaural audio after modulation). The Model
5435 Modulator offers video loop-through. Jumpers located on the
back of the Model 5435 terminate the video inputs at 75 ohms. When
a jumper is removed, the input can be looped using a “Y” adapter
to feed the video to a local monitor or VCR.
Features:
t Three modulated TV channels
t Creates TV channels for cameras or other video sources
t Channel range: CATV 65–125 (excluding 95–99) and UHF 14–64
t Pushbutton digital programming of modulated channels
t Compatible with DA-8200 and DA-550 series distribution amplifiers
t 7.9” W x 1.5” H x 5.5” D
5445
4-Channel Video Modulator
t ORDER # 5445
The Model 5445 4-channel Video Modulator converts four video
and stereo audio inputs to four programmable TV channels (stereo
audio is converted to monaural audio after modulation). The Model
5445 Modulator offers video loop-through. Jumpers on the Model
5445 terminate the video inputs at 75 ohms. When a jumper is
removed, the input can be looped using a “Y” adapter to feed
the video to a local monitor or VCR.
Features:
t Four modulated TV channels
t Creates TV channels for cameras or other video sources
t Channel range: CATV 65–125 (excluding 95–99) and UHF 14–64
t Pushbutton digital programming of modulated channels
t Compatible with DA-8200 and DA-550 series distribution amplifiers
t 7.9” W x 1.5” H x 5.5” D
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
20 Audio/Video Modulators
5515
programmable TV channel (stereo audio is converted to monaural
audio after modulation). The Model 5515 has an IR emitter output
jack and the ability to remotely power a DA-550 or DA-8200 series
distribution amplifier from up to 75 feet away. The Model 5515
works with both the 12-volt and 5-volt IR systems and accessories.
The Model 5515 Modulator offers video loop-through. A jumper
on the Model 5515 terminates the video input at 75 ohms. When
the jumper is removed, the input can be looped using a “Y” adapter
to feed the video to a local monitor or VCR.
1-Channel Video Modulator with IR
t ORDER # 5515
Features:
The Model 5515 1-channel Video Modulator with IR has the same
output power as the rest of the 5500 series, but it is a quarter of
the size. Video and stereo audio inputs are modulated to a
5525
t One modulated TV channel
t Creates a TV channel for a camera or other video source
t Channel range: CATV 65–125 (excluding 95–99) and UHF 14–64
t IR remote control signals from an IR target pass back through the
system coax to an IR emitter
t Pushbutton digital programming of modulated channel
t Can remotely power DA-8200 and DA-550 series distribution amplifiers
t 4.6” W x 1” H x 3.2” D
modulation). The Model 5525 has IR emitter output jacks and the
ability to remotely power a DA-8200 or DA-550 series distribution
amplifier from up to 75 feet away. The Model 5525 works with both
the 12-volt and 5-volt IR systems and accessories. The Model 5525
Modulator offers video loop-through. Jumpers on the Model 5525
terminate the video inputs at 75 ohms. When a jumper is removed,
the input can be looped using a “Y” adapter to feed the video to
a local monitor or VCR.
2-Channel Video Modulator with IR
t ORDER # 5525
Features:
The Model 5525 2-channel Video Modulator with IR converts
two video and stereo audio inputs to two programmable TV
channels (stereo audio is converted to monaural audio after
5545
4-Channel Video Modulator with IR
t ORDER # 5545
t Two modulated TV channels
t Creates TV channels for cameras or other video sources
t Channel range: CATV 65–125 (excluding 95–99) and UHF 14–64
t IR remote control signals from IR targets pass back through the
system coax to IR emitters
t Pushbutton digital programming of modulated channels
t Can remotely power DA-8200 and DA-550 series distribution amplifiers
t 7.9” W x 1.5” H x 5.5” D
The Model 5545 4-channel Video Modulator with IR converts four
video and stereo audio inputs to four programmable TV channels
(stereo audio is converted to monaural audio after modulation).
The Model 5545 has IR emitter output jacks and the ability to
remotely power a DA-8200 or DA-550 series distribution amplifier
from up to 75 feet away. The Model 5545 works with both the 12-volt
and 5-volt IR systems and accessories. The Model 5545 Modulator
offers video loop-through. Jumpers on the Model 5545 terminate
the video inputs at 75 ohms. When a jumper is removed, the input
can be looped using a “Y” adapter to feed the video to a local
monitor or VCR.
Features:
t Four modulated TV channels
t Creates TV channels for cameras or other video sources
t Channel range: CATV 65–125 (excluding 95–99) and UHF 14–64
t IR remote control signals from IR targets pass back through the system
coax to IR emitters
t Pushbutton digital programming of modulated channels
t Can remotely power DA-8200 and DA-550 series distribution amplifiers
t 7.9” W x 1.5” H x 5.5” D
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Audio/Video Modulators 21
5555BID Bi-Directional RF
Distribution Kit with 12-Volt IR System
t ORDER # 5555BID
The Model 5555BID Bi-directional RF Distribution Kit with 12-volt
IR System offers many of the basic components needed to
assemble an 8-room TV distribution system. The kit includes the
following:
(1) - Model DA-550BID Bi-directional RF Distribution
Amplifier with 12-volt IR
(1) - Model 5545 4-channel Modulator with IR
(3) - Model 2100A In-wall Interfaces
(2) - Model 2172 Dual-head IR Emitters
(5) - Model 2501-10 DC Blocking Capacitors
The kit provides eight rooms of amplified bi-directional cable TV
distribution from the Model DA-550BID Amplifier; four injected
TV channels from the Model 5545 Modulator; IR control of four
audio/video source components with the two Model 2172 Dual-head
IR Emitters; three rooms of wall plate termination with IR target
and emitter jacks with the Model 2100A In-wall IR Interfaces (Model
2130A or Model 2132 Set-top IR Targets not included); and five
rooms without IR control using the Model 2501-10 Blocking Capacitors.
Features:
t Four modulated TV channels create TV channels for cameras or
other video sources
t IR remote control signals from IR targets pass back through the
system coax to IR emitters
t In-wall interfaces fit Decora®-style wall plates for a professional
looking installation
t Easily expandable with additional Linear components
5555HHR High-Headroom RF
Distribution Kit with 12-Volt IR System
The Model 5555HHR High-headroom RF Distribution Kit with 12-volt
IR System offers many of the basic components needed to assemble
an 8-room TV distribution system. The kit includes the following:
t ORDER # 5555HHR
(1) - Model DA-550HHR High-headroom RF Distribution
Amplifier with 12-volt IR
(1) - Model 5545 4-channel Modulator with IR
(3) - Model 2100A In-wall Interfaces
(2) - Model 2172 Dual-head IR Emitters
(5) - Model 2501-10 DC Blocking Capacitors
The kit provides eight rooms of amplified off-air antenna or 1-way
cable TV distribution from the Model DA-550HHR Amplifier; four
injected TV channels from the Model 5545 Modulator; IR control
of four audio/video source components with the two Model 2172
Dual-head IR Emitters; three rooms of wall plate termination with
IR target and emitter jacks with the Model 2100A In-wall IR
Interfaces (Model 2130A or Model 2132 Set-top IR Targets not
included); and five rooms without IR control using the Model
2501-10 Blocking Capacitors.
Features:
t Four modulated TV channels create TV channels for cameras or
other video sources
t IR remote control signals from IR targets pass back through the
system coax to IR emitters
t In-wall interfaces fit Decora®-style wall plates for a professional
looking installation
t Easily expandable with additional Linear components
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
22 Audio/Video Modulators
5557BID Bi-Directional RF
Distribution Kit with 5-Volt IR System
The Model 5557BID Bi-directional RF Distribution Kit with 5-volt
IR System offers many of the basic components needed to assemble
an 8-room TV distribution system. The kit includes the following:
t ORDER # 5557BID
(1) - Model DA-8200BID Bi-directional RF Distribution
Amplifier with 5-volt IR
(1) - Model 5525 2-channel Modulator with IR
(2) - Model 2133 Set-top IR Targets
(1) - Model 2172 Dual-head IR Emitter
The kit provides eight rooms of amplified bi-directional cable TV
distribution from the Model DA-8200BID Amplifier; two injected
TV channels from the Model 5525 Modulator; IR control of two
audio/video source components with the Model 2172 Dual-head
IR Emitter; and two rooms of IR remote control using the Model
2133 Set-top IR Targets.
Features:
t Two modulated TV channels create TV channels for cameras or
other video sources
t IR remote control signals from IR targets pass back through the
system coax to IR emitters
t Easily expandable with additional Linear components
5557HHR High-Headroom RF
Distribution Kit with 5-Volt IR System
t ORDER # 5557HHR
The Model 5557HHR High-headroom RF Distribution Kit with
5-volt IR System offers many of the basic components needed to
assemble an 8-room TV distribution system. The kit includes the
following:
(1) - Model DA-8200HHR High-headroom RF Distribution
Amplifier with 5-volt IR
(1) - Model 5525 2-channel Modulator with IR
(2) - Model 2133 Set-top IR Targets
(1) - Model 2172 Dual-head IR Emitter
The kit provides eight rooms of amplified off-air antenna or 1-way
cable TV distribution from the Model DA-8200HHR Amplifier; two
injected TV channels from the Model 5525 Modulator; IR control
of two audio/video source components with the Model 2172
Dual-head IR Emitter; and two rooms of IR remote control using
the Model 2133 Set-top IR Targets.
Features:
t Two modulated TV channels create TV channels for cameras or
other video sources
t IR remote control signals from IR targets pass back through the
system coax to IR emitters
t Easily expandable with additional Linear components
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Audio/Video Modulators 23
5558BID Bi-Directional RF
Distribution Kit with 5-Volt IR System
t ORDER # 5558BID
The Model 5558BID Bi-directional RF Distribution Kit with 5-volt
IR System offers many of the basic components needed to
assemble an 8-room TV distribution system. The kit includes the
following:
(1) - Model DA-8200BID Bi-directional RF Distribution
Amplifier with 5-volt IR
(1) - Model 5545 4-channel Modulator with IR
((3) - Model 2133 Set-top IR Targets
((2) - Model 2172 Dual-head IR Emitters
T kit provides eight rooms of amplified bi-directional cable TV
The
distribution from the Model DA-8200BID Amplifier; four injected
d
TV channels from the Model 5545 Modulator; IR control of four
T
audio/video source components with the two Model 2172 Dual-head
a
IIR Emitters; and three rooms of IR remote control using the
Model 2133 Set-top IR Targets.
M
Features:
F
tt Four modulated TV channels create TV channels for cameras or
other video sources
tt IR remote control signals from IR targets pass back through the
system coax to IR emitters
tt Easily expandable with additional Linear components
5558HHR High-Headroom RF
Distribution Kit with 5-Volt IR System
t ORDER # 5558HHR
The Model 5558HHR High-headroom RF Distribution Kit with
5-volt IR System offers many of the basic components needed to
assemble an 8-room TV distribution system. The kit includes the
following:
(1) - Model DA-8200HHR High-headroom RF Distribution
Amplifier with 5-volt IR
(1) - Model 5545 4-channel Modulator with IR
(3) - Model 2133 Set-top IR Targets
(2) - Model 2172 Dual-head IR Emitters
The kit provides eight rooms of amplified off-air antenna or
1-way cable TV distribution from the Model DA-8200HHR
Amplifier; four injected TV channels from the Model 5545
Modulator, IR control of four audio/video source components
with the two Model 2172 Dual-head IR Emitters; and three rooms
of IR remote control using the Model 2133 Set-top IR Targets.
Features:
t Four modulated TV channels create TV channels for cameras or
other video sources
t IR remote control signals from IR targets pass back through the
system coax to IR emitters
t Easily expandable with additional Linear components
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
24 Audio/Video Modulators
SVM-22
2-Input S-Video Modulator
t ORDER # SVM-22
The Model SVM-22 2-input S-Video Modulator offers complete
MTS stereo encoding and S-Video inputs in a full component-size
rack-mountable case. The Model SVM-22 is a 2-channel stereo
modulator with 25 dBmV of output and easy pushbutton
programming. The unit incorporates S-Video inputs that support
both S-Video and composite video feeds with included adapters.
Offering full MTS stereo with dbx® noise reduction and compatibility
with Dolby Pro Logic® makes the Model SVM-22 perfect for
integration into any home theater system.
The Model SVM-22 offers integrated IR control. Each modulator
has an IR emitter output jack and is compatible with both 12-volt
and 5-volt IR systems. The Model SVM-22 can remotely power
DA series amplifiers from up to 75 feet away.
The Model SVM-22 offers full loop-through outputs with 75-ohm
auto-termination. By connecting video/audio cables to the output
jacks, all video and audio signals will pass through for use with
a local monitor, VCR, or DVR.
The Model SVM-22 is designed to fit any 19” EIA rack (mounting
ears included). The unit is one rack space high.
Features:
t S-Video inputs
t Full MTS stereo sound
t dbx® noise reduction
t Supports Dolby Pro Logic®
t Surround-sound support
t Can remotely power DA series amplifiers
t Mounts with other home theater components in a 19” EIA rack
t Integrated IR control—compatible with 5-volt and 12-volt systems
SVM-24
4-Input S-Video Modulator
t ORDER # SVM-24
The Model SVM-24 4-input S-Video Modulator offers complete
MTS stereo encoding and S-Video inputs in a full component-size
rack-mountable case. The Model SVM-24 is a 4-channel stereo
modulator with 25 dBmV of output and easy pushbutton
programming. The unit incorporates S-Video inputs that support
both S-Video and composite video feeds with included adapters.
Offering full MTS stereo with dbx® noise reduction and compatibility
with Dolby Pro Logic® makes the Model SVM-24 perfect for
integration into any home theater system.
The Model SVM-24 offers integrated IR control. Each modulator
has an IR emitter output jack and is compatible with both 12-volt
and 5-volt IR systems. The Model SVM-24 can remotely power
a DA series amplifier from up to 75 feet away.
The Model SVM-24 offers full loop-through outputs with 75-ohm
auto-termination. By connecting video/audio cables to the output
jacks, all video and audio signals will pass through for use with
a local monitor, VCR, or DVR.
The Model SVM-24 is designed to fit any 19” EIA rack (mounting
ears included). The unit is one rack space high.
Features:
t S-Video inputs
t Full MTS stereo sound
t dbx® noise reduction
t Supports Dolby Pro Logic®
t Surround-sound support
t Can remotely power DA series amplifiers
t Mounts with other home theater components in a 19” EIA rack
t Integrated IR control—compatible with 5-volt and 12-volt systems
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Data, Telephone & Video Distribution Modules 25
DMD-16
Data Distribution Module
t ORDER # DMD-16
The Model DMD-16 Data Distribution Module provides a superior
way to terminate data connections. Each unit has 16 un-bridged
110 punch-down termination points that are aligned with a
corresponding RJ-45 connector. Rated for Cat-5e performance
in data networks, the Model DMD-16 is an excellent data termination
hub for use with an Ethernet hub for LAN networks.
The Model DMD-16 can also be used as a termination point for
control signals over Cat-5, video and audio signals, home control
signals, security camera video, and KSU and PBX phone systems.
Features:
t Cat-5e certified
t Un-bridged termination hub
t 16 data locations
t Labeling system
DMT-16
Telephone Distribution Module
with Surge Protection
t ORDER # DMT-16
The Model DMT-16 Telephone Distribution Module with Surge
Protection will accept four incoming telephone lines and distribute
them to 16 locations with 110 punch-down connectors. It is made
of brushed aluminum and can be easily mounted into the Linear
rack-mounted grid system (Model 2619). Each unit comes with
integrated surge suppression, a master disconnect, and an
RJ-31X connection for alarm systems. Additional features
include individual line LED indicators for surge events and an
easy labeling system for integrated wire management and
location identification.
Features:
t Four phone lines
t 16 locations (110 punch-down connectors)
t 4-Line surge protection
t RJ-31X security interface
t Test and expansion jacks
t Integrated labeling system
t Stand-off design for built-in wire management
DMT-24
Telephone Distribution Module
with Surge Protection
t ORDER # DMT-24
The Model DMT-24 Telephone Distribution Module with Surge
Protection will accept four incoming telephone lines and
distribute them to 24 locations with RJ-45 outputs. It is made
of brushed aluminum and can be easily mounted into the Linear
rack-mounted grid system (Model 2619). Each unit comes with
integrated surge suppression, a master disconnect, and an
RJ-31X connection for alarm systems. Additional features
include individual line LED indicators for surge events and an
easy labeling system for integrated wire management and
location identification.
Features:
t Four phone lines
t 24 locations (RJ-45 connectors)
t 4-Line surge protection
t RJ-31X security interface
t Test and expansion jacks
t Integrated labeling system
t Stand-off design for built-in wire management
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
26 Data, Telephone & Video Distribution Modules
H628
Data Termination Hub
t ORDER # H628
The Model H628 Data Termination Hub terminates up to eight
Cat-5 data lines. The hub features eight RJ-45 jacks and eight
110 punch-down connectors. Each RJ-45 jack connects directly
to its associated 110 punch-down connector.
Features:
t Certified 100 Base-T performance
t Cat-5e performance in a multi-port hub
t Terminates eight Cat-5e cables
t 110 punch-down connectors
t Circuits may be bridged
H629
Data/Telecom Termination Hub
t ORDER # H629
The Model H629 Data/Telecom Termination Hub provides a
superior way to terminate data connections. The unit includes
eight Cat-5 bridgeable circuits (110 punch-down connectors to
RJ-45 jacks) and terminates eight Cat-5 wires. The Model H629
also offers eight additional 110 punch-down connectors for
bridging up to four telephone lines. The unit is the ideal wiring
interface for the Linear Model H650 Integrated Voice Network.
Features:
t Certified 100 Base-T performance
t Eight Cat-5e bridgeable circuits (110 to RJ-45)
t Cat-5e performance in a multi-port hub
t Terminates eight Cat-5 cables
t Additional 110 punch-down connectors for bridging telephone lines
t Ideal for interface with the H650
H611 Telephone Master Hub
with Surge Protection
t ORDER # H611
The Model H611 Telephone Master Hub with Surge Protection
provides a superior method of telephone connection for structured
wiring systems. The Model H611 interfaces up to four incoming
telephone lines with a home security system, provides surge protection
for each individual line, and features a master disconnect jumper.
The module can be expanded through either the RJ-45 or 110
punch-down connectors.
Features:
t Telephone service for four lines
t Surge protection with LED indicator
t RJ-31X for seizure of line one
t System test port-line disconnect
t Output expansion on RJ-45 or 110 punch-down connector
t Six enclosure grid spaces
t 6.25” W x 1.25” H x 2.75” D
H616
Telephone Master Hub
t ORDER # H616
The Model H616 Telephone Master Hub provides a superior
method of telephone distribution for structured wiring systems.
The Model H616 distributes up to four telephone lines to up to
six telephone wall plates. An RJ-31X jack is provided for security
system connection. Additionally, the Model H616 includes an
RJ-45 jack for telephone line expansion.
Features:
t Telephone service for four lines with outputs to six separate locations
t RJ-31X for seizure of line one
t 110 punch-down connectors
t RJ-45 expansion jack
t Six enclosure grid spaces
t 6.25” W x 1” H x 2.75” D
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Data, Telephone & Video Distribution Modules 27
H618
H619
Telephone Expansion Hub
RJ-45 Telephone Interface Hub
t ORDER # H618
t ORDER # H619
The Model H618 Telephone Expansion Hub distributes up to
four telephone lines to up to eight telephone wall plates. The
Model H618 also includes an RJ-45 expansion jack for connecting
multiple H618s.
The Model H619 Telephone Interface Hub distributes up to four
telephone lines to up to 12 telephone locations via RJ-45 jacks.
The Model H619 also includes RJ-45 expansion jacks for
connecting multiple H619s.
Features:
Features:
t Telephone service for four lines with outputs to eight locations
t Expansion accessory to models H611, H612, or H616
t 110 punch-down connectors
t Cat-5 jumper cable included
t Expansion jack for multiple H618s
t Six enclosure grid spaces
t 6.25” W x 1” H x 2.75” D
t Telephone service for four lines with outputs to 12 separate locations
t 12 RJ-45 connectors for output
t Expandable to additional H619s
t Six enclosure grid spaces
t 6.25” W x 1” H x 2.75” D
H801
H802
Combination Telephone/TV Hub
Combination Telephone/TV Hub
t ORDER # H801
t ORDER # H802
Features:
Features:
t Telephone service for two lines to six locations
t 110 punch-down connectors
t Can be mounted upside down
t Distributes CATV/antenna to four TVs
t Six enclosure grid spaces
t 6.25” W x 1” H x 2.75” D
t Telephone service for four lines to six locations
t 110 punch-down connectors
t Can be mounted upside down
t Distributes CATV/antenna to four TVs
t Six enclosure grid spaces
t 6.25” W x 1” H x 2.75” D
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
28 Data, Telephone & Video Distribution Modules
H803
H804
Splitter/Combiner Hub
Splitter/Combiner Hub
t ORDER # H803
t ORDER # H804
Features:
Features:
t 3-Way balanced designed
t 6.5 dB insertion loss @ 1,000 MHz
t 5–1,000 MHz bandwidth covers FM, cable modem, VHF and UHF
bands
t -130 dB RFI rejection
t PCB design for consistent performance
t Tilted 15° for easy connections
t Return loss (IN and OUT) 20 dB minimum (all frequencies)
t Isolation (OUT to OUT) 22–25 dB (all frequencies)
t Six enclosure grid spaces
t 6.25” W x 1” H x 2.75” D
t 4-Way balanced design
t 7.8 dB insertion loss @ 1,000 MHz
t 5–1,000 MHz bandwidth covers FM, cable modem, VHF and UHF
bands
t -130 dB RFI rejection
t PCB design for consistent performance
t Tilted 15° for easy connections
t Return loss (IN and OUT) 20 dB minimum (all frequencies)
t Isolation (OUT to OUT) 22–25 dB (all frequencies)
t Six enclosure grid spaces
t 6.25” W x 1” H x 2.75” D
H806
H808
Splitter TV Hub
Splitter TV Hub
t ORDER # H806
t ORDER # H808
Features:
Features:
t 6-Way splitter
t 5–1,000 MHz bandwidth covers FM, cable modem, VHF
and UHF bands
t -130 dB RFI rejection
t Less than 12 dB insertion loss
t Greater than 16 dB return loss
t Five enclosure grid spaces
t 6.25” W x 2.25” H x 2.25” D
t 8-Way splitter
t 5–1,000 MHz bandwidth covers FM, cable modem, VHF
and UHF bands
t -130 dB RFI rejection
t Less than 13 dB insertion loss
t Greater than 16 dB return loss
t Five enclosure grid spaces
t 6.25” W x 2.25” H x 2.25” D
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Structured Wire Intercom Components 29
DMC-10KIT
Structured Wire Intercom Kit
t ORDER # DMC-10KIT
The Model DMC-10KIT Structured Wire Intercom Kit is an intercom
system designed for structured wire installation in residential or
light commercial applications. The kit includes the following:
(1) - DMC-10H Structured Wire Intercom Hub
(4) - DMC-10RS Intercom Room Stations
(1) - DMC-10DS Intercom Door Station
(1) - 12-volt Switching Power Supply
The room, door, and patio stations showcase a new, contemporary
design, crafted to blend smoothly into the installation’s decor. Station
faceplates are available in a variety of colors to further customize
each installation. Room station keypads are illuminated with soft
blue indicators while the intercom is in use. The door and patio station
keys are illuminated with white lighting for easy nighttime operation.
The heart of the system is the Model DMC-10H Structured Wire
Intercom Hub. The system hub grid mounts in a structured wiring
enclosure (not included, Linear H312KIT recommended). Up to eight
room, door, and patio stations in any combination can be connected
to the system hub using up to 500 feet of standard Cat-5 cable for
each station. For larger installations, a second system hub can be
added for expansion, providing a total system capacity of up to
16 stations. The Model DMC-10AWP Audio Input Wall Plate can
be added to the system to connect an external audio source for
distribution throughout the intercom system.
Each room and patio station supports several useful features.
Privacy mute disables the station’s microphone to prevent monitoring
from other stations. The do-not-disturb feature disables the station’s
microphone and speaker to prevent monitoring and interruption.
Hands-free reply lets the person called respond without having to
press any room station keys.
The room, patio, and door stations mount inside standard 2-gang
junction boxes and are easy to install and wire. Each station and
the system hub contain color-coded Type 110 punch-down terminal
blocks for fast and reliable connection to Cat-5 cable. A 12-volt
switching power supply is included with each intercom hub. For
access control, the optional Model DRW Door Release Mechanism
can be installed and activated from room stations. A choice of three
door chime sounds is available for each door station connected.
For interior stations, use the Model DMC-10RS Room Stations. For
exterior stations, use the Model DMC-10PS Patio Stations and the
Model DMC-10DS Door Stations.
Features:
t Supports any mix of up to eight room, patio, or door stations, up to
16 stations using two hubs
t Hub connects to stations with standard Cat-5 wiring (up to 500 feet
per station)
t Type 110 punch-down Cat-5 color-coded terminals for stations and
optional expansion hub
t Privacy mute and door release overrides selectable by station
t 3-Amp-rated integral door release relay
t Operational status indicators on hub for each station
t Hub grid mounts in structured wiring enclosure (not included, Linear
H312KIT recommended)
t Contemporary design room stations with multi-level blue keypad
backlighting
t White faceplate included on room stations; almond and black available
to match any decor
t White faceplate included on door station; bright brass, antique brass,
and satin nickel available to match any decor
t Room station door talk, door release, mute functions, do-not-disturb,
hands-free communications, and audible 8-step digital volume control
t Extended-life white LED backlit doorbell button on door station for
easy night operation
t Choose from three distinct chime sounds for door station
t Door, room, and patio stations fit standard 2-gang J-box
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
30 Structured Wire Intercom Components
DMC-10H
Structured Wire Intercom Hub
t ORDER # DMC-10H
The Model DMC-10H Structured Wire Intercom Hub is an intercom
system hub designed for structured wire installation in residential or
light commercial applications. The system hub grid mounts in a
structured wiring enclosure (not included, Linear H312KIT recommended).
Up to eight room, door, and patio stations in any combination
can be connected to the system hub using up to 500 feet of standard
Cat-5 cable for each station. For larger installations, a second
system hub can be added for expansion, providing a total system
capacity of up to 16 stations. The Model DMC-10AWP Audio Input
Wall Plate can be added to the system to connect an external
audio source for distribution throughout the intercom system.
Each room and patio station supports several useful features.
Privacy mute disables the station’s microphone to prevent monitoring
from other stations. The do-not-disturb feature disables the
station’s microphone and speaker to prevent monitoring and
interruption. Hands-free reply lets the person called respond
without having to press any room station keys. The room, patio,
and door stations mount inside standard 2-gang junction boxes
and are easy to install and wire. Each station and the system hub
contain color-coded Type 110 punch-down terminal blocks for
fast and reliable connection to Cat-5 cable. A 12-volt switching
power supply is included with each intercom hub. For access
control, the optional Model DRW Door Release Mechanism can
be installed and activated from room stations. A choice of three
door chime sounds is available for each door station connected.
For interior stations, use the Model DMC-10RS Room Stations.
For exterior stations, use the Model DMC-10PS Patio Stations
and the Model DMC-10DS Door Stations.
Features:
t Supports any mix of up to eight room, patio, or door stations, up
to 16 stations using two hubs
t Hub connects to stations with standard Cat-5 wiring (up to 500 feet
per station)
t Type 110 punch-down Cat-5 color-coded terminals for stations and
optional expansion hub
t Privacy mute and door release overrides selectable by station
t 3-Amp-rated integral door release relay
t Operational status indicators on hub for each station
t Hub grid mounts in structured wiring enclosure (not included, Linear
H312KIT recommended)
t Room station door talk, door release, mute functions, do-not-disturb,
hands-free communications, and audible 8-step digital volume control
t Choose from three distinct chime sounds for door station
t Door and room stations fit standard 2-gang J-box
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Structured Wire Intercom Components 31
DMC-10RS
DMC-10DS
Intercom Room Station
Intercom Door Station
t ORDER # DMC-10RS
t ORDER # DMC-10DS
Features:
Features:
t Contemporary design with multi-level blue
keypad backlighting
t White faceplate included; almond and black
available to match any decor
t Door talk and door release
t Privacy mute feature
t Do-not-disturb feature
t Hands-free reply
t Audible 8-step digital volume control
t Fits in standard 2-gang J-box
t Choose from three distinct chime sounds for
door station
t Contemporary design with multi-level white
keypad backlighting
t White faceplate included; antique brass, bright brass,
and satin nickel available to match any decor
t Fits in standard 2-gang J-box
DMC-10AWP
DMC-10PS
Audio Input Wall Plate
Intercom Patio Station
t ORDER # DMC-10AWP
t ORDER # DMC-10PS
Features:
Features:
t External audio input connection for
DMC-10H Structured Wire Intercom Hub
t Mounts in a single-gang J-box
t Fits Decora® faceplate
t One pair of color-coded RCA jacks
t One dry contact mute output mini-jack
t LED audio signal indicator
t Adjustable audio level control
t Choose from three distinct chime sounds
for door station
t Contemporary design with multi-level white
keypad backlighting
t White faceplate included; antique brass, bright brass, and
satin nickel available to match any decor
t Fits in standard 2-gang J-box
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
32 Structured Wire Intercom Components
DMC-10DFAB-4
DMC-10PFAB-4
DMC-10RFA-4
Door Station Faceplates (4pack) (Antique Brass)
Patio Station Faceplates
(4-pack) (Antique Brass)
Room Station Faceplates
(4-pack) (Almond)
t ORDER # DMC-10DFAB-4
t ORDER # DMC-10PFAB-4
t ORDER # DMC-10RFA-4
DMC-10DFBB-4
DMC-10PFBB-4
DMC-10RFB-4
Door Station Faceplates
(4-pack) (Bright Brass)
Patio Station Faceplates
(4-pack) (Bright Brass)
Room Station Faceplates
(4-pack) (Black)
t ORDER # DMC-10DFBB-4
t ORDER # DMC-10PFBB-4
t ORDER # DMC-10RFB-4
DMC-10DFSN-4
DMC-10PFSN-4
DMC-10RFW-4
Door Station Faceplates
(4-pack) (Satin Nickel)
Patio Station Faceplates (4pack) (Satin Nickel)
Room Station Faceplates
(4-pack) (White)
t ORDER # DMC-10DFSN-4
t ORDER # DMC-10PFSN-4
t ORDER # DMC-10RFW-4
DMC-10DFW-4
DMC-10PFW-4
Door Station Faceplates (4pack) (White)
Patio Station Faceplates
(4-pack) (White)
t ORDER # DMC-10DFW-4
t ORDER # DMC-10PFW-4
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
RF Splitters, Filters & Accessories 33
2509-10
2512 DC & IR Passing 2-Way
2514 DC & IR Passing 4-Way
9 dB Tap (10-pack)
Splitter/Combiner
Splitter/Combiner
t ORDER # 2509-10
t ORDER # 2512
t ORDER # 2512-25 (25-PACK)
t ORDER # 2514
t ORDER # 2514-25 (25-PACK)
t 10-Piece bulk pack
t 1 GHz bandwidth
t 1 dB straight through loss
t 9 dB loss at tap
t Use as signal tap or combiner
Features:
Features:
t 1 GHz bandwidth
t 3.5 dB insertion loss
t Passes DC IR signals on the coax
t Use as signal splitter or combiner
t 1 GHz bandwidth
t 8 dB insertion loss
t Passes DC IR signals on the coax
t Use as signal splitter or combiner
2532
2534
2538
2-Way Splitter/Combiner
4-Way Splitter/Combiner
8-Way Splitter/Combiner
t ORDER # 2532
t ORDER # 2532-25 (25-PACK)
t ORDER # 2534
t ORDER # 2534-25 (25-PACK)
t ORDER # 2538
Features:
Features:
Features:
t 1 GHz bandwidth
t 4 dB insertion loss
t Use as signal splitter or combiner
t 1 GHz bandwidth
t 9 dB insertion loss
t Use as signal splitter or combiner
t 1 GHz bandwidth
t 12 dB insertion loss
t Use as signal splitter or combiner
NF-469 Notch Filter
NF-470 Notch Filter
NF-471 Notch Filter
t ORDER # NF-469
t ORDER # NF-470
t ORDER # NF-471
Features:
Features:
Features:
t Notch filter frequency 469.25 MHz to 497.25 MHz
t Rejects CATV channels 64 to 70
t Allows insertion of CATV channels 65, 66, 67,
68, and 69
t Rejects off-air UHF TV channels 14 to 19
t Allows insertion of UHF TV channels 15, 16, 17,
and 18
t 3.25” L x 1” W
t Notch filter frequency 499.25 MHz to 523.25 MHz
t Rejects CATV channels 70 to 74
t Allows insertion of CATV channels 71, 72, and 73
t Rejects off-air UHF TV channels 19 to 23
t Allows insertion of UHF TV channels 20, 21, and 22
t 3.25” L x 1” W
t Notch filter frequency 529.25 MHz to 559.25 MHz
t Rejects CATV channels 75 to 80
t Allows insertion of CATV channels 76, 77, 78, and 79
t Rejects off-air UHF TV channels 24 to 29
t Allows insertion of UHF TV channels 25, 26,
27, and 28
t 3.25” L x 1” W
Features:
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
34 RF Splitters, Filters & Accessories
LPF-380
LPF-470
LPF-600
Low-Pass Filter
Low-Pass Filter
Low-Pass Filter
t ORDER # LPF-380
t ORDER # LPF-470
t ORDER # LPF-600
Features:
Features:
Features:
t 0 to 380 MHz band-pass frequency
t Passes off-air TV channels 2 to 13
t Passes CATV channels 2 to 50
t Allows insertion of TV channels 14 to 69
t Allows insertion of CATV channels 55 to 125
t 0 to 470 MHz band-pass frequency
t Passes off-air TV channels 2 to 13
t Passes CATV channels 2 to 64
t Allows insertion of TV channels 18 to 69
t Allows insertion of CATV channels 69 to 125
t 0 to 600 MHz band-pass frequency
t Passes off-air TV channels 2 to 35
t Passes CATV channels 2 to 86
t Allows insertion of TV channels 40 to 69
t Allows insertion of CATV channels 91 to 125
LPF-750
2501-10 Blocking
2503-10 3 dB In-Line
Low-Pass Filter
Capacitor (10-pack)
Attenuator (10-pack)
t ORDER # LPF-750
t ORDER # 2501-10
t ORDER # 2503-10
Features:
Features:
Features:
t 0 to 750 MHz band-pass frequency
t Passes off-air TV channels 2 to 60
t Passes CATV channels 2 to 116
t Allows insertion of TV channels 65 to 69
t Allows insertion of CATV channels 121 to 125
t 10-Piece bulk pack
t Blocks DC IR signals
t Passes RF signals
t Type “F” barrel connector
t 10-Piece bulk pack
t Reduces signal strength 3 dB
t Type “F” barrel connector
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
RF Splitters, Filters & Accessories 35
2506-10 6 dB In-Line
2507-10
TC-200A
Attenuator (10-pack)
75-Ohm Terminator (10-pack)
Tilt Compensator
t ORDER # 2506-10
t ORDER # 2507-10
t ORDER # TC-200A
Features:
Features:
Features:
t 10-Piece bulk pack
t Reduces signal strength 6 dB
t Type “F” barrel connector
t 10-Piece bulk pack
t Terminates unused splitter outputs with
a balanced 75-ohm load
t Type “F” male connector
t Compensates for high-frequency signal loss
on long coax runs
t Female “F” and male “F” connectors
t Includes Female-Female barrel connector for
in-line use
C-BCK
V902
Cable Box Combiner Kit
Satellite Signal Diplexer
t ORDER # C-BCK
t ORDER # V902
Features:
Allows a CATV Box to be tuned to all normal CATV channels, with
modulated channels on custom channel numbers.
t 40 MHz to 2150 MHz bandwidth
t Combines antenna and satellite dish signals together on one coax cable
t Splits antenna and satellite dish signals apart from one coax cable
t Female “F” ANT/SAT connector
t Female “F” ANT connector
t Female “F” SAT connector
Features:
t Two 2-way splitter/combiners
t High-pass filter
t Two 6-inch coax cables with type “F” connectors
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
36 Infrared Remote Controls
2010 In-Wall Power
2100A
2130A 12-Volt Mini IR
Injector IR Interface
12-Volt In-Wall IR Interface
Target with Talk Back LED
t ORDER # 2010
t ORDER # 2100A
t ORDER # 2130A
Features:
Features:
Features:
t In-wall interface
t RF output
t Two IR emitter ports
t Power jack for remote power of
DA-8200 and DA-550
t Decora®-style wall plate
t 1.3” W x 4” H x 2.2” D
t In-wall interface
t RF output
t One IR target port
t One IR emitter port
t 12-Volt IR systems only
t Decora®-style wall plate
t 1.3” W x 4” H x 2.2” D
t 7-Foot cord with mini-stereo plug
t Red “talk back” LED tests system for correct
wiring as well as indicates infrared reception
t Double-sided adhesive mounting
t Nominal reception range: > 30 feet
t Nominal reception angle: 55 degrees off axis
2131 12-Volt In-Wall
2132 12-Volt Set-Top
2133
Target with Talk Back LED
Target with Talk Back LED
5-Volt Set-Top Target
t ORDER # 2131
t ORDER # 2132
t ORDER # 2133
Features:
Features:
Features:
t 3-Wire connection to Model 2100A interface
t Red “talk back” LED tests system for correct
wiring as well as indicates infrared reception
t J-box mounting
t Fits Decora®-style wall plates
t Includes dark lens for decorator-style wall plate
t Nominal reception angle: 45 degrees off axis
t Nominal reception range: > 25 feet
t Maximum cable length: One mile with 18 gauge
t 1.3” W x 4” H x 2.2” D
t 7-Foot cord with mini-stereo plug
t Red “talk back” LED tests system for correct
wiring as well as indicates infrared reception
t Nominal reception range: > 30 feet
t Nominal reception angle: 45 degrees off axis
t 3.3” W x 1” H x 2” D
t Set-top target
t 5-Volt IR
t Use with 3025 and DA-8200 series
distribution amplifiers
t Dual “F” connectors
t 3.3” W x 1” H x 2” D
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Infrared Remote Controls 37
2171
2172
Single-Head IR Emitter
Dual-Head IR Emitter
t ORDER # 2171
t ORDER # 2172
Features:
Features:
t Compatible with 5-volt and 12-volt IR systems
t 5-Foot cord with mini-plug
t Use with video hubs, in-wall interfaces, and 5500 series modulators
t 0.3” W x 0.5” H x 0.3” D
t Compatible with 5-volt and 12-volt IR systems
t 5-Foot cord with mini-plug
t Use with video hubs, in-wall interfaces, and 5500 series modulators
t 0.3” W x 0.5” H x 0.3” D
2181
2184
IR Coupler
IR Breakout Block
t ORDER # 2181
t ORDER # 2184
Features:
Features:
t Allows IR control over multiple DA-550s or DA-8200s
t Compact in-line design
t Use one Model 2181 for each additional DA-550 or DA-8200
t 2.3” W x 1” H x 0.7” D
t Connects directly to DA-550 or DA-8200 distribution amplifiers
t Allows for local IR in enclosure
t Four emitter jacks
t One power jack
t One 4-position expansion terminal block
t 1.3” W x 3” H x 0.8” D
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
38 Structured Wiring Enclosures
H312KIT
The enclosure mounts in the wall between standard 16-inch
spaced studs, or it can be surface mounted. The flexi-mount
system features four flexible mounting tabs on the sides of the
enclosure. The flexi-mount tabs compensate for varying stud
spacing and allow for adjusting the depth of the cabinet for flush
mounting with all thicknesses of drywall.
12” Plastic Enclosure, Includes Cover
t ORDER # H312KIT
A snap-on cover that can be screwed shut is supplied with the
enclosure. The vented cover has a raised interior, allowing for
easy wiring and better component cooling. Eight combination
conduit knockouts (four along the top, two on the bottom, and one
on each side) that fit either 2” or 0.5” conduit fittings are provided. The
enclosure has an additional knockout on the bottom to mount a
single-gang junction box for AC outlet installation.
Features:
The Model H312KIT 12” Plastic Enclosure, Includes Cover provides
grid mounting space for Linear structured wiring components.
The enclosure is ETL Listed and features 19 grid inches of mounting
capacity in two 9.5” columns. Structured wiring modules snap
securely into the enclosure’s mounting grid. Recommended enclosure
for the DMC-10H Structured Wire Intercom Hub.
t 12 inches high
t 19 grid inches (two 9.5-inch columns)
t Fits between studs
t ABS construction
t Flexi-mount system (slots and tabs allow for surface or flush mount)
t Electrical J-box knockout on bottom
t Eight combination 0.5” or 2” knockouts, including two located on
the sides of the box
t Paint shield and four Phillips head screws included
t Snap-on vented cover included
t ETL Listed
H318
HC18A
18” Enclosure
18” Enclosure Cover
t ORDER # H318
t ORDER # HC18A
The Model H318 18” Enclosure provides grid mounting space for
Linear structured wiring components.
The Model HC18A 18” Enclosure Cover fits on the Model H318
Structured Wiring Enclosure. The ventilated enclosure cover
secures and protects the structured wiring components mounted
inside the Model H318 enclosure. The cover is powder-coated
and painted bright white. The optional Model H208 Lock Kit can
be installed on the cover for additional security.
Features:
t HC18A: Optional enclosure cover (not shown)
t 18 inches high
t 33 grid inches (Two 16.5-inch columns)
t Fits between studs
t 16-Gauge all-metal construction
t Flexi-mount system (slots and tabs allow for surface or flush mount)
t New electrical knockout in bottom
t Eight knockouts, including two located on the side of the box
t Accepts H290 or H291 Power Accessory
t Optional H208 Lock available
Features:
t Secures and protects components inside the enclosure
t Bright white powder-coated paint finish
t Four louvered vents for enclosure cooling
t Accepts the Model H208 Lock Kit for additional security
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Structured Wiring Enclosures 39
HD18 18” Hinged Door
H336
Depth Extension Kit
36” Enclosure
t ORDER # HD18
t ORDER # H336
The Model HD18 18” Hinged Door Depth
Extension Kit fits on the Model H318
Structured Wiring Enclosure. The ventilated
enclosure cover secures and protects the
structured wiring components mounted
inside the Model H318 Enclosure. The hinged
door increases the cabinet depth for larger
power supplies and improved cooling.
The Model H336 36” Enclosure provides
grid mounting space for Linear structured
wiring components.
The white cover has a smoked Plexiglas
window with the Linear logo printed on it.
The optional Model H208 Lock Kit can be
installed on the cover for additional security.
Features:
t Secures and protects components inside
the enclosure
t Adds depth to the cabinet, allowing room for
larger components
t Improved cooling
t Accepts the Model H208 Lock Kit for
additional security
HC36A
Features:
t HC36A: Optional enclosure cover (not shown)
t 36 inches high
t 69 grid inches (Two 34.5-inch columns)
t Fits between studs
t 16-Gauge all-metal construction
t Flexi-mount system (slots and tabs allow for
surface or flush mount)
t New electrical knockout in bottom
t Eight knockouts, including two located on
the side of the box
t Accepts H290 or H291 Power Accessory
t Optional H208 Lock available
HD36 36” Hinged Door
36” Enclosure Cover
Depth Extension Kit
t ORDER # HC36A
t ORDER # HD36
The Model HC36A 36” Enclosure Cover
fits on the Model H336 Structured Wiring
Enclosure. The ventilated enclosure cover
secures and protects the structured wiring
components mounted inside the Model H336
Enclosure. The cover is powder-coated and
painted bright white. The optional Model
H208 Lock Kit can be installed on the cover
for additional security.
The Model HD36 36” Hinged Door Depth
Extension Kit fits on the Model H336
Structured Wiring Enclosure. The ventilated
enclosure cover secures and protects the
structured wiring components mounted
inside the Model H336 Enclosure. The hinged
door increases the cabinet depth for larger
power supplies and improved cooling.
Features:
t Secures and protects components inside
the enclosure
t Bright white powder-coated paint finish
t Six louvered vents for enclosure cooling
t Accepts the Model H208 Lock Kit for
additional security
linearcorp.com / 1 800 421 1587
The white cover has a smoked Plexiglas
window. The optional Model H208 Lock Kit
can be installed on the cover for additional
security.
Features:
t Secures and protects components inside
the enclosure
t Adds depth to the cabinet, allowing room for
larger components
t Improved cooling
t Accepts the Model H208 Lock Kit for additional
security
Linear Audio / Video / Data Solutions
40 Structured Wiring Enclosures
H200
H205
Universal Mounting Bracket
Enclosure Cover
t ORDER # H200
t ORDER # H205
The Model H200 Universal Mounting Bracket is the smallest and
most economical metal bracket for mounting Linear structured
wiring modules. This bracket also provides an easy solution for
mounting Linear’s structured wiring modules inside another
manufacturer’s structured wiring enclosure containing an
incompatible mounting grid. The H200 bracket is compatible with
all Linear single-width structured wiring modules.
The Model H205 Enclosure Cover creates a sturdy, allmetal enclosure by attaching to the Model H200 Universal
Mounting Bracket.
Features:
t Fits Model H200 Enclosure
t Steel, powder-coated, bright white snap-on cover
t Includes locking screws
Features:
t 6.5” W x 10.25” H
t Ten grid inches available
t Vertical or horizontal mounting
t Surface mount over single-gang or double-gang J-boxes
t Can be used as an adapter for mounting Linear single-width modules
inside other manufacturer’s enclosures
t Optional cover Model H205
H008
H011
18” Demo Cover
36” Demo Cover
t ORDER # H008
t ORDER # H011
Clear plastic cover for H318 enclosure
Clear plastic cover for H336 enclosure
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Structured Wiring Accessories 41
H290 4-Duplex Outlet
H291 2-Duplex Outlet
H270
AC Power Accessory
AC Power Accessory
Wire Spacer
t ORDER # H290
t ORDER # H291
t ORDER # H270
Features:
Features:
Features:
t Eight outlets (four dual-plug, single-gang
outlets)
t Fits H318 or H336 enclosures
t Mounts at the top, bottom, left, or right of
enclosure
t Outlets not included
t Four outlets (two dual-plug, single-gang
outlets)
t Fits H318 or H336 enclosures
t Mounts at the top, bottom, left, or right of
enclosure
t Outlets not included
t Wire spacer—enclosure accessory
t Connects to the grid pattern on H318
and H336 enclosures
t Lifts modules one inch above grid
t Adds wire management capability
t Increases usable space
2619
2620 Rack Mount
Adapter for Modulators
H275 Universal Mounting and
Rack Mount Grid
t ORDER # 2619
t ORDER # 2620
t ORDER # H275
Wire Management Bracket
Features:
Features:
t
Features:
t Fits 19” EIA racks
t Ten spaces high and five inches deep
t Can be surface mounted with 0.5-inch clearance
t Compatible with Linear grid mount products
t 19” rack adapter for Linear modulators
t Modulator firmly locks in place
t Uses one rack space
t Provides 26 grid
spaces for mounting
Linear structured
wiring modules
t Connects to the grid
pattern vertically or
horizontally on the
H318 or H336
structured wire
enclosures
t Mo
Mounts
nts vertically
erticall or horizontally inside most
14” or larger industry-standard structured wire
enclosures
t Lifts Linear structured wiring modules one
inch above mounting grid
t Adds wire management capability while
increasing usable space
t Mounts vertically or horizontally directly onto
a backboard or wall
MB-56 Universal Half-Width Grid Mounting Bracket
MB-55 Universal Full-Width
t ORDER # MB-56
Grid Mounting Bracket
t ORDER # MB-55
t Features:
Features:
t 6.25” wide
t White powder-coated finish
t Double-sided tape included for attaching
devices to the bracket
t Plunger snap-lock secures bracket to the
mounting grid
linearcorp.com / 1 800 421 1587
t 12.5” wide
t White powder-coated finish
t Double-sided tape included for attaching
devices to the bracket
t Plunger snap-lock secures bracket to the
mounting grid
Linear Audio / Video / Data Solutions
42 Structured Wiring Accessories
H000 Replacement
H001 Universal Grid
H208
Snap Locks (10-pack)
Mount Kit (12-pack)
Lock Kit
t ORDER # H000
t ORDER # H001
t ORDER # H208
Used to replace any broken Linear grid
mounting snap locks
Allows non-Linear modules to be fastened to
the Linear grid
Allows the locking of Linear enclosures with a
key to provide additional security; fits HC18A,
HC36A, HD18, and HD36
H271
H272 Snap-In
H281
Coupling Tube
Grommets (5-pack)
Adapter
t ORDER # H271
t ORDER # H272
t ORDER # H281
Enclosure accessory for connecting two
enclosures 2” apart, 2” conduit size
Provides wire protection from the sharp metal
edges of the 2” enclosure knockouts
Creates a mounting surface to attach
keystone-style telephone, data, and coax barrel
connectors (connectors not included) to the
Linear mounting grid
H282 Isolation
Mounting Bracket
H283 Isolation
t ORDER
DER # H282
t ORDER # H283
Heavy-duty bracket that allows mounting other products onto the
Linear mounting grid
Light-duty bracket that allows mounting other products onto the Linear
mounting grid
Mounting Bracket
H691
H692
Cat-5e Patch Cord (1-Foot)
Cat-5e Patch Cord (2-Foot)
t ORDER # H691
t ORDER # H692
1-Foot patch cord with RJ-45 modular plugs on both ends; Cat-5e
compliant; wired in the T-568A standard
2-Foot patch cord with RJ-45 modular plugs on both ends; Cat-5e
compliant; wired in the T-568A standard
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Total Access Port Wall Plates 43
WPx-PDC Data/Telephone/Coax TAP Wall Plate WPx-PC Telephone/Coax TAP Wall Plate
t ORDER # WPA-PDC (Almond)
t ORDER # WPA-PDC-10 (10-PACK) (Almond)
t ORDER # WPI-PDC (Ivory)
t ORDER # WPI-PDC-10 (10-PACK) (Ivory)
t ORDER # WPW-PDC (White)
t ORDER # WPW-PDC-10 (10-PACK) (White)
t ORDER # WPA-PC (Almond)
t ORDER # WPA-PC-10 (10-PACK) (Almond)
t ORDER # WPI-PC (Ivory)
t ORDER # WPI-PC-10 (10-PACK) (Ivory)
t ORDER # WPW-PC (White)
t ORDER # WPW-PC-10 (10-PACK) (White)
Features:
Features:
t Decora® -compatible design
t Our most versatile wall plate design
t One Cat-5e RJ-45 jack, two breakout RJ-25 telephone
jacks, and two knockouts for use with coax barrel connectors
(connectors included)
t Includes two 110 punch-down blocks
for termination and two coax barrel connectors
t Decora® -compatible design
t Four RJ-25 telephone jacks
t Breaks out each telephone line to an individual jack
t Provisions for two coax barrel connectors
(connectors included)
t Includes one 110 punch-down block
plus two coax barrel connectors
WPx-DD Dual Data TAP Wall Plate
WPx-DP Data/Telephone TAP Wall Plate
t ORDER # WPA-DD (Almond)
t ORDER # WPA-DD-10 (10-PACK) (Almond)
t ORDER # WPI-DD (Ivory)
t ORDER # WPI-DD-10 (10-PACK) (Ivory)
t ORDER # WPW-DD (White)
t ORDER # WPW-DD-10 (10-PACK) (White)
t ORDER # WPA-DP (Almond)
t ORDER # WPA-DP-10 (10-PACK) (Almond)
t ORDER # WPI-DP (Ivory)
t ORDER # WPI-DP-10 (10-PACK) (Ivory)
t ORDER # WPW-DP (White)
t ORDER # WPW-DP-10 (10-PACK) (White)
Features:
Features:
t Decora® -compatible design
t Includes two 110 punch-down blocks
for termination
t Two Cat-5e RJ-45 connectors
t Decora® -compatible design
t Single Cat-5e RJ-45 jack and four RJ-25
telephone jacks
t Breaks out each telephone line to an individual jack
t Includes two 110 punch-down blocks for termination
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
44 Music Distribution Systems
MDS-6A
Music Distribution System
t ORDER # MDS-6A
MDS-6A
KIT #1
t ORDER # MDS-6A KIT #1
Features:
t Six audio sources selectively switched to six speaker zones
t 12 channels (six left and right pairs) x 40 watts per channel amplifier power
t Front panel speaker zone on/off status indicators
t Removable speaker terminals with wire lock levers (no tools required)
t User feedback to all backlit system keypads
t RJ-45 connection to each keypad with Cat-5 cable
t IR target built into each keypad
t IR remote control of audio sources with six source-specific routed IR
output ports
t Frequency response 20 Hz to 20 kHz ±1 dB
t Total harmonic distortion @ 1 kHz 0.02%
t Signal-to-noise ratio greater than 95 dB
t Zone-to-zone crosstalk isolation greater than 70 dB
t Size: 17” W x 12.5” D x 4” H
t Weight: 21 lbs.
The Model MDS-6A Kit #1 Music Distribution System Kit offers the
basic components needed to assemble a 6-room music distribution
system. The kit includes the following:
(1) – Model MDS-6A Music Distribution System Amplifier
(4) – Model MCS-1A Speaker Zone Control Keypads
(2) – Model MCS-2A Multi-function Speaker Zone Control Keypads
(6) – Model 2171 Single-head IR Emitters
The kit provides six rooms of amplified music distribution from the
Model MDS-6A Amplifier, four basic speaker zone controllers with the
Model MCS-1A Keypads, two full-featured speaker zone controllers
with model MCS-2A keypads and IR control of six audio source
components with the Model 2171 Single-head IR Emitters.
MDS-6A
KIT #2
t ORDER # MDS-6A KIT #2
The Model MDS-6A Kit #2 Music Distribution System Kit offers the
basic components needed to assemble a 6-room music distribution
system. The kit includes the following:
(1) – Model MDS-6A Music Distribution System Amplifier
(6) – Model MCS-1A Speaker Zone Control Keypads
(6) – Model 2171 Single-head IR Emitters
The kit provides six rooms of amplified music distribution from the
Model MDS-6A Amplifier, six basic speaker zone controllers with
the Model MCS-1A Keypads, and IR control of six audio source
components with the Model 2171 Single-head IR Emitters.
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Music Distribution Systems 45
MCS-1A
Speaker Zone Control Keypad
t ORDER # MCS-1A
MCS-2A Multi-Function
Speaker Zone Control Keypad
t ORDER # MCS-2A
MDS6A-REM
Remote Control for MDS-6A
t ORDER # MDS6A-REM
MDS-LLK
Line Level Adapter
t ORDER # MDS-LLK
MDS-PCK
6x12 Patch Cord Kit
t ORDER # MDS-PCK
Features:
t Single-gang mounting
t Connects via RJ-45 connector
t Fits Decora®-style wall plate
t Allows selection of any audio source
t Allows volume up/down and mute per each zone
t Multi-colored, backlit LED keys
t Full IR pass through
t Customizable button tops
t Keypad bezel provided in white and ivory
t Multiple units can be used in the same zone
Features:
t Double-gang mounting
t Connects via RJ-45 connector
t Fits Decora®-style wall plate
t Allows selection of any audio source
t Allows volume up/down and mute per each zone
t Multi-colored, backlit keys
t Full IR pass through
t Customizable button tops
t Keypad bezel provided in white and ivory
t Multiple units can be used in the same zone
t Programmable transport buttons (Play, Stop, Pause, etc.)
t Can learn up to 25 macros with ten steps each
t User-assignable delays for macros
t Data cloning between keypads
t Extensive on-board IR code library simplifies source IR code programming
Features:
t IR target built into each keypad
t IR remote control of audio sources with six source-specific routed IR
output ports
Features:
t Stereo speaker level inputs
t Stereo line level outputs
t Adjustable balance control
Features:
t Connect up to six audio sources to two MDS-6A Amplifiers for
12-zone distribution
t Supports stereo (left and right) audio signals
t IR remote control of audio source components from both
MDS-6A Amplifiers
t Color coded
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
46 Music Distribution Systems
XDM4600KIT
Music Distribution System Kit
t ORDER # XDM4600KIT
Features:
t Four XDM46K Keypads and one DS3BS Door Speaker included
t XDM46CC Central Controller and XDM46R Remote Control included
t 20 Hz to 20 kHz frequency response
t 0.2% maximum total harmonic distortion
t 95 db minimum signal-to-noise ratio
t Central controller powered from 120 VAC
t Class D digital amplifier in each speaker zone keypad with 60 watts
output power
t IR receiver built into each keypad; IR repeater in controller
t Four speaker zones expandable to eight speaker zones
t Keypad intercom privacy feature
t Keypads mount in standard double-gang J-boxes
XDM46EH Music Distribution
System Expansion Hub
t ORDER # XDM46EH
Features:
t Expands XDM system to up to eight speaker zones
t 20 Hz to 20 kHz frequency response
t 0.2% maximum total harmonic distortion
t 95 db minimum signal-to-noise ratio
t Expansion hub powered from 120 VAC
t Class D digital amplifier in each speaker zone keypad with 60 watts
output power
t IR receiver built into each keypad; IR repeater in controller
t Keypad intercom privacy feature
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Music Distribution Systems 47
XDM46K
Music Distribution System Keypad
t ORDER # XDM46K
XDM46R Music Distribution
System Remote Control
t ORDER # XDM46R
XDMWP Music Distribution System
Features:
t 20 Hz to 20 kHz frequency response
t 0.2% maximum total harmonic distortion
t 95 db minimum signal-to-noise ratio
t Class D digital amplifier in each speaker zone keypad with 60 watts
output power
t IR receiver built into each keypad; IR repeater in controller
t Keypad intercom privacy feature
t Keypad mounts in double-gang J-box
Features:
t Infrared remote control for XDM system
t Remote can learn codes from other remotes
t Large LCD display
t Source component display names can be customized
t Programmable macros with up to 20 steps each
t Powered by four AAA batteries
t Low-battery indicator
Features:
t ORDER # XDMWP
t Local audio input wall plate for XDM46K Keypad
t White wall plate faceplate
t Connects local line-level stereo or monaural audio source
t Line-level stereo audio output jacks for subwoofer or loop-through
t Wall plate mounts in single-gang J-box
DS3B2
Features:
Audio Input Wall Plate
XDM System Intercom Door Station with
Bell Button
t ORDER # DS3B2
t White faceplate
t Lighted doorbell button
t 2-Way voice communications
t Mounts in Model ME3 Door Station Rough-in Enclosure
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
48 Music Distribution Systems
XDM46KAF
Music Distribution
System Keypad Color Kit (4-pack) (Almond)
Features:
t ORDER # XDM46KAF
t Almond-colored faceplates and wall plates
t Changes keypad color or replaces damaged or worn
keypad components
t Fits XDM46K Keypads
t Four sets included in each kit
XDM46KBF
Features:
Music Distribution
System Keypad Color Kit (4-pack) (Black)
t ORDER # XDM46KBF
t Black-colored faceplates and wall plates
t Changes keypad color or replaces damaged or worn
keypad components
t Fits XDM46K Keypads
t Four sets included in each kit
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Music Distribution Systems 49
XDMCKIT Music Distribution
Features:
t ORDER # XDMCKIT
t Plug-in screw terminal connectors for XDM46CC and XDM46EH
t Eight 4-position speaker zone keypad data connectors
t Two 8-position speaker zone keypad power connectors
t One 8-position door speaker data/power connector
XDMIRE Music Distribution
Features:
System Replacement Connector Kit
System Replacement Emitter Kit
t ORDER # XDMIRE
t Six infrared emitters for controlling source components
t Emitters for replacement or re-work purposes
t Adhesive backing on emitters for placing over source component
IR receiver window
t 10-Foot cable and mini-plug on each emitter
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
50 4-Ohm Speakers
MNC
Mini-Cube Speaker Pair
t ORDER # MNC
The Model MNC Mini-cube Speaker Pair are 4-ohm, 70-watt,
dual-pivoting indoor cube speakers. Each speaker has two
pivoting cubes, each containing a 2.5-inch paper cone with a
rubber surround speaker covered with a metal grille. The minicubes can be mounted on the wall or ceiling, or be used freestanding.
The speaker frequency response is 250 Hz to 15 kHz, and the
magnets are shielded for home theater use near monitors. The
speaker pair is supplied with hanger brackets.
Features:
t White-colored cube speakers
t Pair of speakers, each with dual 2.5-inch drivers
t 4-Ohm impedance
t 70 watts maximum power
t 250 Hz to 15 kHz frequency response
t Hanger brackets included
t 3.5” W x 6.5” H x 4.5” D
MNCC
Center Channel Speaker
t ORDER # MNCC
The Model MNCC Center Channel Speaker is a 4-ohm, 70-watt,
2-way, dual-speaker, home theater center channel speaker.
The speaker has two 4-inch woofers, a 0.5-inch tweeter, and a
metal grille.
The speaker frequency response is 250 Hz to 15 kHz, and the
magnets are shielded for home theater use near monitors.
Features:
t Black-colored center channel speaker
t Dual 4-inch woofers, 0.5-inch tweeter
t 4-Ohm impedance
t 70 watts maximum power
t 250 Hz to 15 kHz frequency response
t 14.5” W x 5.438” H x 5.875” D
MNCS Mini-Cube Home Theater
Speaker Package
t ORDER # MNCS
The Model MNCS Mini-cube Home Theater Speaker Package is a
complete speaker package for creating a home theater system.
The following speakers are included in this package:
(2) - MNC Mini-cube Speaker Pairs (White)
(1) - MNCC Center Channel Speaker (Black)
(1) - PSW108 Powered Subwoofer (Black)
Features:
t Complete home theater speaker package
t Four white, magnetically shielded 70-watt cube speakers
t One black, magnetically shielded 70-watt center channel speaker
t One black, 100-watt down-firing 8-inch powered subwoofer
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
8-Ohm Speakers 51
MNCX Mini-Cube
Platinum Speaker Pair (White)
t ORDER # MNCX
The Model MNCX Mini-cube Platinum Speaker Pair (White) are
8-ohm, 100-watt, dual-pivoting indoor cube speakers. Each
speaker has two pivoting cubes, each containing a 3-inch paper
cone with a rubber surround speaker covered with a cloth grille.
The mini-cubes can be mounted on the wall or ceiling, or be
used freestanding.
The speaker frequency response is 150 Hz to 20 kHz, and the
magnets are shielded for home theater use near monitors. The
speaker pair is supplied with hanger brackets.
Features:
t White-colored cube speakers
t Pair of speakers, each with dual 3-inch drivers
t 8-Ohm impedance
t 100 watts maximum power
t 150 Hz to 20 kHz frequency response
t Hanger brackets included
t 4” W x 8.75” H x 4” D
MNCXB
Mini-Cube
Platinum Speaker Pair (Black)
t ORDER # MNCXB
The Model MNCXB Mini-cube Platinum Speaker Pair (Black)
are 8-ohm, 100-watt, dual-pivoting indoor cube speakers. Each
speaker has two pivoting cubes, each containing a 3-inch paper
cone with a rubber surround speaker covered with a cloth grille.
The mini-cubes can be mounted on the wall or ceiling, or be
used freestanding.
The speaker frequency response is 150 Hz to 20 kHz, and the
magnets are shielded for home theater use near monitors. The
speaker pair is supplied with hanger brackets.
Features:
t Black-colored cube speakers
t Pair of speakers, each with dual 3-inch drivers
t 8-Ohm impedance
t 100 watts maximum power
t 150 Hz to 20 kHz frequency response
t Hanger brackets included
t 4” W x 8.75” H x 4” D
MNCXCB Platinum Center
Channel Speaker
t ORDER # MNCXCB
The Model MNCXCB Platinum Center Channel Speaker is an
8-ohm, 100-watt, dual-speaker, home theater center channel
speaker. The speaker has two 3-inch woofers with rubber surrounds
and a cloth grille.
The speaker frequency response is 150 Hz to 20 kHz, and the
magnets are shielded for home theater use near monitors.
Features:
t Black-colored center channel speaker
t Dual 3-inch woofers with rubber surrounds
t 8-Ohm impedance
t 100 watts maximum power
t 150 Hz to 20 kHz frequency response
t 9.5” W x 4” H x 4” D
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
52 8-Ohm Speakers
MNCXS Mini-Cube Platinum Home
The Model MNCXS Mini-cube Platinum Home Theater Speaker
Package (White) is a complete speaker package for creating a
home theater system. The following speakers are included in
this package:
Theater Speaker Package (White)
t ORDER # MNCXS
(2) - MNCX Mini-cube Platinum Speaker Pairs (White)
(1) - MNCXCB Platinum Center Channel Speaker (Black)
(1) - PSW112 Platinum Powered Subwoofer (Black)
Features:
t Complete home theater speaker package
t Four white, magnetically shielded 100-watt cube speakers
t One black, magnetically shielded 100-watt center channel speaker
t One black, 100-watt down-firing 12-inch powered subwoofer
MNCXSB Mini-Cube Platinum
The Model MNCXSB Mini-cube Platinum Home Theater Speaker
Package (Black) is a complete speaker package for creating a
home theater system. The following speakers are included in
this package:
Home Theater Speaker Package (Black)
t ORDER # MNCXSB
(2) - MNCXB Mini-cube Platinum Speaker Pairs (Black)
(1) - MNCXCB Platinum Center Channel Speaker (Black)
(1) - PSW112 Platinum Powered Subwoofer (Black)
Features:
t Complete home theater speaker package
t Four black, magnetically shielded 100-watt cube speakers
t One black, magnetically shielded 100-watt center channel speaker
t One black, 100-watt down-firing 12-inch powered subwoofer
MNCXSM Mini-Cube Platinum Home Theater
Speaker Package (White & Black)
t ORDER # MNCXSM
The Model MNCXSM Mini-cube Platinum Home Theater Speaker
Package (White & Black) is a complete speaker package for creating
a home theater system. The following speakers are included in
this package:
(1) - MNCX Mini-cube Platinum Speaker Pair (White)
(1) - MNCXB Mini-cube Platinum Speaker Pair (Black)
(1) - MNCXCB Platinum Center Channel Speaker (Black)
(1) - PSW112 Platinum Powered Subwoofer (Black)
Features:
t Complete home theater speaker package
t Two white, magnetically shielded 100-watt cube speakers
t Two black, magnetically shielded 100-watt cube speakers
t One black, magnetically shielded 100-watt center channel speaker
t One black, 100-watt down-firing 12-inch powered subwoofer
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
8-Ohm Speakers 53
PSW108
The subwoofer is powered from a 120-VAC source and contains
automatic power switching circuitry. The auto-power feature will
turn on the subwoofer’s amplifier when an audio input signal is
detected. The amplifier will power down a few minutes after the
audio input signal stops. The automatic power feature can be
switched off to have the subwoofer’s amplifier powered constantly.
Powered Subwoofer
t ORDER # PSW108
The adjustable crossover frequency control sets the upper
frequency range of the subwoofer. It can be adjusted 40 Hz
to 140 Hz to suit the lower frequency capabilities of the other
speakers in the system. A crossover bypass switch is included
to extend the high-end frequency response of the subwoofer
to approximately 350 Hz. The subwoofer phase switch controls
the speaker’s polarity and can be set to match the phase of the
other speakers in the system for the loudest bass.
Features:
The Model PSW108 Powered Subwoofer is a down-firing 8-inch
powered subwoofer with a built-in 100-watt amplifier. The PSW108
has a frequency response from 40 Hz to 300 Hz. An adjustable
volume control is provided to set the subwoofer’s bass level.
This subwoofer has both line-level and speaker-level stereo
inputs with loop-through connections for both. The line-level inputs
and outputs are female RCA connectors. The speaker level inputs
and outputs are spring-loaded press-down terminals.
PSW112
t Black-colored subwoofer
t 8-Inch down-firing speaker
t 100 watts RMS maximum power output
t 40 Hz to 350 Hz frequency response
t Line-level inputs and speaker-level inputs
t 8-Ohm impedance on speaker-level inputs
t All inputs have loop-through outputs
t Adjustable high-pass crossover 40 Hz to 140 Hz
t Crossover bypass, automatic power, and speaker phase switch
t Volume control
t Powered from 120 VAC with optional automatic amplifier power switching
t 9.188” W x 13.313” H x 13.688” D
The subwoofer is powered from a 120-VAC source and contains
automatic power switching circuitry. The auto-power feature will
turn on the subwoofer’s amplifier when an audio input signal is
detected. The amplifier will power down a few minutes after the
audio input signal stops. The automatic power feature can be
switched off to have the subwoofer’s amplifier powered constantly.
Platinum Powered Subwoofer
t ORDER # PSW112
The adjustable crossover frequency control sets the upper
frequency range of the subwoofer. It can be adjusted 40 Hz to
140 Hz to suit the lower frequency capabilities of the other speakers
in the system. A crossover bypass switch is included to extend
the high-end frequency response of the subwoofer to approximately
300 Hz. The subwoofer phase switch controls the speaker’s
polarity and can be set to match the phase of the other speakers
in the system for the loudest bass.
Features:
The Model PSW112 Powered Subwoofer is a down-firing 12-inch
powered subwoofer with a built-in 100-watt amplifier. The PSW112
has a frequency response from 30 Hz to 140 Hz. An adjustable
volume control is provided to set the subwoofer’s bass level.
This subwoofer has both line-level and speaker-level stereo inputs
with loop-through connections for both. The line-level inputs and
outputs are female RCA connectors. The speaker level inputs
and outputs are spring-loaded press-down terminals.
t Black-colored subwoofer
t 12-Inch down-firing speaker
t 100 watts RMS maximum power output
t 30 Hz to 140 Hz frequency response
t Line-level inputs and speaker-level inputs
t 8-Ohm impedance on speaker-level inputs
t All inputs have loop-through outputs
t Adjustable high-pass crossover 40 Hz to 140 Hz
t Crossover bypass, automatic power, and speaker phase switch
t Volume control
t Powered from 120 VAC with optional automatic amplifier power switching
t 14” W x 15.75” H x 16” D
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
54 8-Ohm Speakers
WG100C
The speaker frequency response is 50 Hz to 20 kHz. Two 3-position
±3 db switches allow customization of the woofer and tweeter levels
to best suit the installation. The swivel tweeter permits pointing the
tweeter toward the listening area to pinpoint the high-frequency sound.
WG Series Ceiling Speaker Pair
t ORDER # WG100C
The speakers mount using a rubber-padded cam-lock system.
The cam-lock tabs swing out behind the speaker and tighten
down to secure the speaker to the mounting surface. The Model
MR6C Ceiling Speaker Mounting Ring Pair is required to install
these speakers.
High-quality, spring-loaded, gold-plated speaker wire terminals
ensure good electrical connection. The grille and frame can be
painted if necessary.
Features:
The Model WG100C WG Series Ceiling Speaker Pair are 8-ohm,
100-watt, 2-way in-ceiling speakers. Each speaker has a 6.5-inch
Kevlar cone woofer with butyl rubber surround, a 1-inch aluminum
dome swivel tweeter, and a white aluminum grille. The unique
WG Series horn-shaped speaker baffle is designed for superior
sound dispersion.
WG100W
WG Series In-Wall Speaker Pair
t ORDER # WG100W
t In-ceiling speaker pair
t White aluminum grille
t Cam-lock rubber-padded mounting system
t 6.5-Inch Kevlar woofer, 1-inch aluminum dome swivel tweeter
t 8-Ohm impedance
t 100 watts maximum power
t 50 Hz to 20 kHz frequency response
t 9” diameter frame
The Model WG100W WG Series In-wall Speaker Pair are 8-ohm,
100-watt, 2-way in-wall speakers. Each speaker has a 6.5-inch
Kevlar cone woofer with butyl rubber surround, a 1-inch aluminum
dome swivel tweeter, and a white aluminum grille. The unique
WG Series horn-shaped speaker baffle is designed for superior
sound dispersion.
The speaker frequency response is 50 Hz to 20 kHz. Two 3-position
±3 db switches allow customization of the woofer and tweeter levels
to best suit the installation. The swivel tweeter permits pointing
the tweeter toward the listening area to pinpoint the high-frequency
sound.
The speakers mount using a rubber-padded cam-lock system.
The cam-lock tabs swing out behind the speaker and tighten
down to secure the speaker to the mounting surface. The speaker
separates from its frame for easy installation. A Model MR6W
Wall Speaker Mounting Ring Pair is required for these speakers.
An IR lens is built into the speaker’s baffle for mounting an infrared
remote control receiver behind the speaker grille. High-quality,
spring-loaded, gold-plated speaker wire terminals ensure good
electrical connection. The grille and frame can be painted if necessary.
Features:
t In-wall speaker pair
t White aluminum grille
t Cam-lock rubber-padded mounting system
t 6.5-Inch woofer, 1-inch swivel tweeter
t 8-Ohm impedance
t 100 watts maximum power
t 50 Hz to 20 kHz frequency response
t 9” W x 12.313” H
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
8-Ohm Speakers 55
WG150C
The speaker frequency response is 35 Hz to 20 kHz. Two
3-position ±3 db switches allow customization of the woofer and
tweeter levels to best suit the installation. The swivel tweeter
permits pointing the tweeter toward the listening area to pinpoint
the high-frequency sound.
WG Series Ceiling Speaker Pair
t ORDER # WG150C
The speakers mount using a rubber-padded cam-lock system.
The cam-lock tabs swing out behind the speaker and tighten
down to secure the speaker to the mounting surface. The Model
MR8C Ceiling Speaker Mounting Ring Pair is required to install
these speakers.
High-quality, spring-loaded, gold-plated speaker wire terminals
ensure good electrical connection. The grille and frame can be
painted if necessary.
Features:
The Model WG150C WG Series Ceiling Speaker Pair are 8-ohm,
150-watt, 2-way in-ceiling speakers. Each speaker has an 8-inch
Kevlar cone woofer with butyl rubber surround, a 1-inch aluminum
dome swivel tweeter, and a white aluminum grille. The unique
WG Series horn-shaped speaker baffle is designed for superior
sound dispersion.
WG150W
WG Series In-Wall Speaker Pair
t ORDER # WG150W
t In-ceiling speaker pair
t White aluminum grille
t Cam-lock rubber-padded mounting system
t 8-Inch Kevlar woofer, 1-inch aluminum dome swivel tweeter
t 8-Ohm impedance
t 150 watts maximum power
t 35 Hz to 20 kHz frequency response
t 10.875” diameter frame
The Model WG150W WG Series In-wall Speaker Pair are 8-ohm,
150-watt, 2-way in-wall speakers. Each speaker has an 8-inch
Kevlar cone woofer with butyl rubber surround, a 1-inch aluminum
dome swivel tweeter, and a white aluminum grille. The unique
WG Series horn-shaped speaker baffle is designed for superior
sound dispersion.
The speaker frequency response is 35 Hz to 20 kHz. Two 3-position
±3 db switches allow customization of the woofer and tweeter levels
to best suit the installation. The swivel tweeter permits pointing the
tweeter toward the listening area to pinpoint the high-frequency sound.
The speakers mount using a rubber-padded cam-lock system.
The cam-lock tabs swing out behind the speaker and tighten
down to secure the speaker to the mounting surface. The speaker
separates from its frame for easy installation. A Model MR8W
Wall Speaker Mounting Ring Pair is required for these speakers.
An IR lens is built into the speaker’s baffle for mounting an infrared
remote control receiver behind the speaker grille. High-quality,
spring-loaded, gold-plated speaker wire terminals ensure good
electrical connection. The grille and frame can be painted if necessary.
Features:
t In-wall speaker pair
t White aluminum grille
t Cam-lock rubber-padded mounting system
t 8-Inch woofer, 1-inch swivel tweeter
t 8-Ohm impedance
t 150 watts maximum power
t 35 Hz to 20 kHz frequency response
t 10.25” W x 14.938” H
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
56 8-Ohm Speakers
FSHW Indoor/Outdoor
Speaker Pair (White)
t ORDER # FSHW
FSHWB Indoor/Outdoor
Speaker Pair (Black)
t ORDER # FSHWB
ROCK8G
Rock Speaker (Granite)
t ORDER # ROCK8G
ROCK8R
Rock Speaker (Rust)
t ORDER # ROCK8R
WS5
Indoor/Outdoor
Speaker Pair
t ORDER # WS5
Features:
t White-colored cube speakers
t 8-Ohm impedance
t 50 watts maximum power
t Pair of 2-way speakers with 4-inch woofers and 0.5-inch tweeters
t 100 Hz to 18 kHz frequency response
t Hanger brackets and hardware included
t 8” W x 5.25” H x 4.5” D
Features:
t Black-colored cube speakers
t 8-Ohm impedance
t 50 watts maximum power
t Pair of 2-way speakers with 4-inch woofers and 0.5-inch tweeters
t 100 Hz to 18 kHz frequency response
t Hanger brackets and hardware included
t 8” W x 5.25” H x 4.5” D
Features:
t Granite-colored rock speaker
t 8-Ohm impedance
t 8-Inch woofer and 2.5-inch tweeter
t 100 watts maximum power
t 100 Hz to 20 kHz frequency response
t Weather-resistant for outdoor use
Features:
t Rust-colored rock speaker
t 8-Ohm impedance
t 8-Inch woofer and 2.5-inch tweeter
t 100 watts maximum power
t 100 Hz to 20 kHz frequency response
t Weather-resistant for outdoor use
Features:
t White cube speakers
t 8-Ohm impedance
t 70 watts maximum power
t Pair of 2-way speakers with 5-1/4-inch woofers and 1-inch titanium
dome tweeters
t 65 Hz to 20 kHz frequency response
t Hanger brackets and hardware included
t 7.25” W x 9.625” H x 6.5” W
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
8-Ohm Speakers 57
S40C
Ceiling Speaker Pair
t ORDER # S40C
S50C
Ceiling Speaker Pair
t ORDER # S50C
S50CKIT
Ceiling Speaker Kit
t ORDER # S50CKIT
S50W
In-Wall Speaker Pair
t ORDER # S50W
Features:
t In-ceiling speaker pair
t White metal grille
t Cam-lock mounting system
t 6.5-Inch woofer, 1-i nch swivel tweeter
t 8-Ohm impedance
t 40 watts maximum power
t 60 Hz to 20 kHz frequency response
t 9” diameter x 3.375” D
Features:
t In-ceiling speaker pair
t White metal grille
t Cam-lock mounting system
t 6.5-Inch woofer, 1-inch swivel tweeter
t 8-Ohm impedance
t 50 watts maximum power
t 50 Hz to 20 kHz frequency response
t 9” diameter x 3.375” D
Features:
t In-ceiling speaker pair
t White metal grille
t Cam-lock mounting system
t 6.5-Inch woofer, 1-inch swivel tweeter
t 8-Ohm impedance
t 50 watts maximum power
t 50 Hz to 20 kHz frequency response
t Stereo volume control with white, Decora®-style wall plate included
t 9” diameter x 3.375” D
Features:
t In-wall speaker pair
t White metal grille
t Cam-lock mounting system
t 6.5-Inch woofer, 1-inch swivel tweeter
t 8-Ohm impedance
t 50 watts maximum power
t 50 Hz to 16 kHz frequency response
t 8.625” W x 12” H x 3.375” D
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
58 8-Ohm Speakers
S100C
Ceiling Speaker Pair
t ORDER # S100C
S100W
In-Wall Speaker Pair
t ORDER # S100W
PACKHTNS In-Wall Home
Theater Speaker Package
Features:
t In-ceiling speaker pair
t White metal grille
t Cam-lock mounting system
t 8-Inch woofer, 1-inch swivel tweeter
t 8-Ohm impedance
t 100 watts maximum power
t 35 Hz to 20 kHz frequency response
t 10.75” diameter x 4.125” D
Features:
t In-wall speaker pair
t White metal grille
t Cam-lock mounting system
t 6.5-Inch woofer, 0.875-inch swivel tweeter
t 8-Ohm impedance
t 100 watts maximum power
t 40 Hz to 20 kHz frequency response
t 8.625” W x 12” H x 3.625” D
The Model PACKHTNS In-wall Home Theater Speaker Package
is a speaker package for creating an in-wall home theater system
without a subwoofer.
t ORDER # PACKHTNS
The in-wall speakers are rated at 100 watts maximum power.
The following speakers are included in this package:
(5) - S100W In-wall Speakers
(1) - HTWP Home Theater Wall Plate
Features:
t Home theater speaker package
t Five white, 100-watt in-wall speakers
t Home theater wall plate for connection to amplifier and speakers
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Speaker Rough-In Mounting Rings 59
MR6C Ceiling Speaker
MR6W In-Wall Speaker
Mounting Ring Pair
Mounting Ring Pair
t ORDER # MR6C
t ORDER # MR6W
Pair of ceiling speaker mounting rings for 6-1/2” WG100C
WG Series Ceiling Speakers
Pair of in-wall speaker mounting rings for 6-1/2” WG100W
WG Series In-wall Speakers
MR8C Ceiling Speaker
Mounting Ring Pair
MR8W In-Wall Speaker
Mounting Ring Pair
t ORDER # MR8C
t ORDER # MR8W
Pair of ceiling speaker mounting rings for 8” WG150C
WG Series Ceiling Speakers
Pair of in-wall speaker mounting rings for 8” WG150W
WG Series In-wall Speakers
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
60 Audio Wall Plates, Speaker & Volume Controls
SS1
Speaker Selector
t ORDER # SS1
Features:
t 6-Pair speaker selector
t Dual audio source capable with A/B switch; supports one or two amplifiers
t Impedance match switch to select the number of speaker pairs connected
t Constant 8-ohm load on amplifier regardless of number of speakers selected
t Isolated ground paths for left and right channels
t 100 watts maximum capacity per speaker channel
t Removable terminals support up to 12-gauge wire
IM1
IM1D Stereo Volume Control
Stereo Volume Control
with Decora® Wall Plate
t ORDER # IM1
t ORDER # IM1D (WHITE)
t ORDER # IM1DA (ALMOND)
Features:
Features:
t Stereo volume control
t Standard white wall plate
t Constant 8-ohm load on amplifier regardless of volume setting
t 75 watts maximum capacity
t Mounts in single-gang J-box
t Stereo volume control
t Decora®-style wall plate
t Constant 8-ohm load on amplifier regardless of volume setting
t 75 watts maximum capacity
t Mounts in single-gang J-box
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Audio Wall Plates, Speaker & Volume Controls 61
HTWP
HTWP7
WPW-D7.1
Home Theater Wall Plate
(5.0 System)
Home Theater Wall Plate
(7.1 System)
Home Theater Wall Plate
(7.1 System)
t ORDER # HTWP
t ORDER # HTWP7
t ORDER # WPW-D7.1
Features:
Features:
Features:
t Home theater wall plate for 5.0 speaker
systems
t Terminates speaker wires
t Gold-plated binding posts connect to spade
lugs, banana jacks, and bare wires
t Mounts in double-gang J-box
t Home theater wall plate for 7.1 speaker
systems
t Terminates speaker wires
t Gold-plated binding posts connect to spade
lugs, banana jacks, and bare wires
t Two RCA jacks for line-level amplified
subwoofer
t Mounts in triple-gang J-box
t 18 gold-plated binding posts
t Red and black color-coded
t Two gold-plated RCA-to-F adapters for
powered subwoofer applications
t Use the BLACK banana plugs for a
professional-looking installation
t Fits double-gang J-box
t Available in white only
SL2
SL4
Single Speaker Wall Plate
Dual Speaker Wall Plate
t ORDER # SL2
t ORDER # SL4
Features:
Features:
t Wall plate for single speaker
t Terminates speaker wires
t Gold-plated binding posts connect to spade lugs, banana jacks,
and bare wires
t Mounts in single-gang J-box
t Wall plate for two speakers
t Terminates speaker wires
t Gold-plated binding posts connect to spade lugs, banana jacks,
and bare wires
t Mounts in single-gang J-box
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
62 Audio/Video Distribution Accessories
2743
999-017-01
226888
Cable Set
Power Supply
12 VDC @ 200mA
Power Supply 12 VDC @ 2.5
Amps
t03%&3999-017-01
t03%&3226888
Used with Model DA-520A
Used with Model DMC-10H
219558 Power Supply
350-086 Power Supply
350-100 Power Supply
@ 12 VDC @ Two Amps
15 VDC @ 300mA
15 VDC @ 500mA
t ORDER # 219558
t ORDER # 350-086
t ORDER # 350-100
Used with Model SVD-8
Used with Models 3015, 3025, 5415, 5425,
5435,DA-8200BID, DA-8200HHR, DA-506BID,
DA-550BID, DA-550HHR
Used with Models DA-500A, 5445, 5515, 5525
350-101 Power Supply
350-102 Power Supply
350-103 Power Supply
15 VDC @ 900mA
15 VDC @ 900mA
15 VDC @ 600mA
t ORDER # 350-101
t ORDER # 350-102
t ORDER # 350-103
Used with Model 5545
Used with Models SVM-22, SVM-24
Used with Models SVC-10, SVC-10R, SVS-52
t ORDER # 2743
The Model 2743 cable
set has special RCA
connectors that
allow another set of
cables to be connected
directly to the RCAs on
the Model 2743. This allows the signals
to be looped through without the use of
a Y adapter. The Model 2743 is ideal for
use with the 5500 series modulators.
Features:
t 3-Conductor cable
t Supports stereo (left and right) audio and
video signals
t Color coded
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Application Diagrams 63
HDTV Switching and Up-Scaling System
DVD player
DVR recorder
1080i
HDMI
with
digital
audio
480p
Component
video and
analog audio
1080i
HDMI
with
digital
audio
Game box
720p
S-Video and
analog audio
DBS satellite receiver
Model
SCALER-2-1080P
Scaler is used to up-scale video, digitize audio,
and switch between the four sources
1080p HDMI
with digital audio
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
64 Application Diagrams
HDTV Switching, Up-Scale, and Extender System
DVD player
Model
COMP-2-HDMI-AD
Component video
and analog audio
HDMI
with
digital
audio
HDMI
with
digital
audio
DVR recorder
HDMI
with
digital
audio
Game box
HDMI
with
digital
audio
DBS satellite receiver
Model
HDMI-SW-4X1
HDMI
with
digital
audio
1080p HDMI
with digital
audio
Model
SCALER-2-1080P
Model
HDMI-CAT5-EXT
(sender)
Component signals are converted to HDMI for DVD player.
Switcher selects between the four sources.
Scaler is used to up-scale video and digitize audio.
Cat-5 extender lengthens HDMI delivery distance.
1080p HDMI
with digital
audio
HDMI
over two
runs of Cat-5
Up to 150 feet at 1080p
Model
HDMI-CAT5-EXT
(receiver)
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Application Diagrams 65
Large HDTV Distribution System
" ("
"##!%!
&#
#
$
Model
HDMI-DA-1X8
Model
HDMI-CAT5-EXT
(sender)
Model
HDMI-DA-1X8
"##!%!"$!"&#
#$##&"#!$#
)!"&#" ("#'#!
#"%!("##!#
"#!$# )!&##" ("
#"#!$# )!"
$"!'$" ("
" ("
%!#&
!$"#
+ #*
##**
Model
HDMI-CAT5-EXT
(receiver)
" ("
Model
HDMI-DA-1X8
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
66 Application Diagrams
Connection Diagram for 5-Volt IR and DA-8200HHR
M
M
M
M
M
Accessories used with DA-8200HHR/BID:
Model 2133
5-volt Set-top Target
Model 2171
Single-head IR Emitter
linearcorp.com / 1 800 421 1587
Model 5545
4-channel Video Modulator with IR
Linear Audio / Video / Data Solutions
Application Diagrams 67
Connection Diagram for 12-Volt IR and DA-550HHR
M
M
S
R
M
M
MEDIA CENTER
V
C
V
C
M
M
M
M
Accessories used with DA-550HHR/BID:
Model 2172
Dual-head IR Emitter
Model 2132
12-volt Set-top Target with Talk Back LED
Model 5545
4-channel Video Modulator with IR
linearcorp.com / 1 800 421 1587
Model 2100A
12-volt In-wall IR Interface
Linear Audio / Video / Data Solutions
68 Application Diagrams
Connection Diagram for Model DA-500A
M
M
M
M
Accessories used with DA-500A:
Model 5515
1-channel Video Modulator with IR
Model 2512
DC & IR Passing 2-way Splitter/Combiner
linearcorp.com / 1 800 421 1587
Model 2534
4-way Splitter/Combiner
Linear Audio / Video / Data Solutions
Application Diagrams 69
Connection Diagram for Model 5525
M
M
M
M
M
Accessories used with 5525:
Model 2171
Single-head IR Emitter
Model DA-8200HHR
High-headroom RF Distribution Amplifier
with 5-volt IR
linearcorp.com / 1 800 421 1587
Model 2133
5-volt Set-top Target
Linear Audio / Video / Data Solutions
70 Application Diagrams
Connection Diagram for Model 5558 RF Distribution System
M
M
M
M
M
Accessories included with 5558BID:
Two Model 2172
Dual-head IR Emitters
One Model 5545
4-channel Video Modulator with IR
One Model DA-8200BID
Bi-directional RF Distribution Amplifier with
5-volt IR
linearcorp.com / 1 800 421 1587
Three Model 2133
5-volt Set-top Targets
Linear Audio / Video / Data Solutions
Application Diagrams 71
Applications for Splitters/Combiners and Taps
M
M
M
M
M
M
M
MODEL
DC AND IR
AS A SPLITTER
AS A COMBINER
LOSS
INSERTION
PASSING
2512
3.5
yes
2532
4.0
no
2514
8.0
yes
2534
9.0
no
2509
through 1.0
tap 9.0
no
2538
12.0
no
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
72 Application Diagrams
Frequently Asked Questions About
DTV-Compatible Amplifiers
Q. Can I use Linear’s amplifiers to distribute DTV?
Q. How do NTSC and DTV differ?
A. Yes, Linear’s DA series amplifies all video signals between
54 MHz and 1 GHz. Television, including DTV, is broadcast
between 55 MHz and 800 MHz. Our new generation of
amplifiers increases headroom to reduce distortion and
accommodates digital signals. In addition, they offer more
robust power and greater EMI rejection.
A. NTSC and DTV differ in picture format, lines of
resolution, modulation methods when transmitted,
and audio encoding.
NTSC is an analog RF transmission with a picture format
of 4:3. The resolution rate is 525 lines with 480 lines of
active interlaced material. Interlaced means that the 480
lines are divided into two fields; even numbered lines are
transmitted during field one and odd numbered lines are
transmitted during field two. Each field is drawn on the
screen every 60th of a second, this is known as 480i. The
audio is transmitted using MTS stereo and Dolby
Pro Logic®.
Q. When do I use a bi-directional (BID) amplifier and
when do I use a high headroom (HHR) amplifier?
A. Either amplifier can be used with DTV. The BID amplifier
has a 5–42 MHz return path designed for cable modems
and interactive cable boxes (pay-per-view). Use the HHR
amplifier for installations where an antenna is being used.
DTV or ATSC is a digital video standard and is transmitted
using 8VSB modulation. There are 18 variations on the
standard, with many having an aspect ratio of 16:9. All
DTV tuners are compatible with all 18 standards. The
three main standards include 480p, 720p, and 1080i. The
480p and 720p are progressive formats, which allows
the entire picture to be drawn in a single pass. The 1080i
is interlaced and, like NTSC, is drawn in two passes of
two separate fields. Only the 720p and, 1080i displayed
in a 16:9 format are considered to be true HDTV. 480p
is considered standard television (SDTV). The audio is
encoded using Dolby Digital, offering up to 5:1 channels of
digital sound.
Q. When is Linear going to make a DTV modulator?
A. A modulator is not needed for “off-the-air” DTV.
Modulators are only used to distribute local video sources.
Currently, there are no video sources that provide the
ATSC (DTV) data stream. When DVD players or VCRs that
generate HDTV signals become available, we will design a
solution to distribute them.
OFF-AIR
BAND
VHF
low
VHF
high
UHF
CHANNEL
NUMBER
2–6
7–13
14 – 69
54 MHz–1 GHz
Amplifiers
7–13
2–6
14–69
FREQUENCY
MHz
50
CABLE
BAND
VHF
low
MID
band
VHF
high
SUPER
band
HYPER
band
ULTRA band
CHANNEL
NUMBER
2–6
14–22 7–13
23–36
37– 64
65 –125
100
150
200
250
300
350
400
450
linearcorp.com / 1 800 421 1587
500
550
600
650
700
750
800
Linear Audio / Video / Data Solutions
Reference Section 73
Troubleshooting with
Channel Plus
No Picture
Verify that the video source is on and is producing a video signal.
Check that the TV and the modulator are tuned to the same
channel. For example, if the modulator is broadcasting on UHF
channel 16, make sure the TV is on UHF 16 rather than CATV 16.
UHF 16 and CATV 16 are at different frequencies.
Weak Modulated UHF Channel
If the TV has a separate UHF input, be sure that it is connected.
LEDs on the Modulator Blink
The display will blink if you have assigned the same channel to
multiple inputs. You need to have one unused channel space
between channels.
Diagonal Lines, Known as Herringbone Interference,
on Modulated Channels
You may have chosen a channel number that is not completely
vacant. Distant UHF stations may be unviewable, but will cause
interference if you try to create a new channel at the same
frequency. Also, cable companies often have extra signals where
there should be none. Move the modulated channel to another
number. You may have to add a low-pass filter to remove cable
company noise. If a filter does not work, try adding a DC-block to
remove common mode interference.
Herringbone Interference on Multiple Channels,
Including Modulated Channels
If the problem disappears when you remove the CATV/Ant feed
then the RF amplifier is overloaded by abnormally strong signals.
Often, you can cure the problem with a simple attenuator. Use
a variable attenuator and try to find a signal level where the
interference just disappears. Sometimes, the problem is one
station that is far stronger than the rest. Attenuating all of the
signals with a simple attenuator will cause the desired stations to
be weak (snowy). In this case you must reduce the strength of only
the offending station. A common FM trap will help if the problem is
a nearby FM tower. If the problem is a nearby TV station, often the
station management can provide suitable filters.
Audio Volume is Low
The left and right audio inputs are combined for monaural. For
proper audio level, both right and left inputs must be used. If you
have a mono source, connect it to both right and left inputs using
an RCA ‘‘Y’’ connector.
No Color on Modulated Channels
You may have chosen the incorrect cable standard. Not all
televisions can accommodate the 1.25 MHz frequency difference
between the H and I cable standards.
Trouble with the Infrared Remote Control
Use the red IR DATA light on the modulator as a troubleshooting
aid. This light will blink as remote control signals are relayed. If the
light is constantly on, one or more of the IR targets is receiving
electrical or optical noise. At the distribution unit, begin to
disconnect the outputs to the TVs until the IR DATA light goes off.
This will tell you which IR target is the source of the noise. Next,
cover the front of the offending IR target. If the IR DATA light turns
off, the IR target is “seeing” a source of IR noise, such as a solidstate fluorescent lamp. If the light does not go out, the problem
may be radiated electrical noise from the plasma or direct-view TV.
Reposition this IR target. On 5-volt systems, if repositioning the IR
target does not help, the TV may be conducting noise from its
input. Place a DC block between the IR target and the TV. If
the IR DATA light seems to indicate a proper operation, but
the component is not being controlled, the IR emitter may be
mislocated. Be sure the emitters are in front of the IR sensor on
the video source.
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
74 Reference Section
System Design
t-BZPVUTZTUFNOPUJOHMFOHUITPGSVOT
locations of splitters, taps, combiners,
and TV sets. Where cable runs exceed
200’ (60 m), add a tilt compensator
whenever an amplifier stage follows.
M
t%FUFSNJOFDBCMFUZQFUPCFVTFEBOE
enter all system losses using the chart
below.
M
M
M
M
M
M
M
M
M
M
M
M
t"EEBNQMJGJFSTXIFOOFDFTTBSZUP
ensure that the signal level never falls
below 0 dBmV (60 dBμV) at any
point in the system and that TVs get
at least 5 dBmV (65 dBμV) of signal.
M
M
M
M
t"EEBUUFOVBUPSTXIFOOFDFTTBSZUP
ensure that the signal level at the TVs
does not exceed 15 dBmV (75 dBμV).
M
t4UVEZUIFFYBNQMFCFMPX*GZPVOFFE
help call Linear Technical Support
at 800-421-1587.
M
M
M
M
EXAMPLE
M
M
68 TV SCHOOL SYSTEM
The head end is located in the media center. A CATV feed is combined with the output of two modulators (typically connected to an
assortment of VCRs, satellite receivers, and DVD players). There are four TVs located in the media center and up to 64 TVs located in
distant classrooms (up to 650’ from the media center). The small numbers in red indicate the signal level in dBmV (add 60 dBmV) at
various locations in the system. For the gains and losses associated with the various RF components, see the chart below.
Component Description
Model
Coaxial Cable 75Ω impedance
RG59
7.6 dB/100’ (24.9B/100m)
RG6
6.0 dB/100’ (19.7 dB/100 m)
RG11
4.0 dB/100’ (13.1 dB/100 m)
2512
3.5 dB
2532
4.0 dB
2514
8.0 dB
2534
9.0 dB
Tap
2509
1.0 dB through 9.0 dB tap
Tilt Compensator
TC-200A
4.0 dB
Attenuator
2503
3.0 dB
2506
6.0 dB
DA-500
18.0 dB
Splitters and Combiners
RF Amplifier
Gain
Loss
Your System
Total Gain
Total Loss
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Reference Section 75
Frequency Spectrum
band
BROADCAST
chnl
off-air
VHF low
2
3
4
5
6
FM radio
VHF high
55.2500
61.2500
67.2500
77.2500
83.2500
chnl
CABLE TELEVISION
std
hrc
irc
1
2
3
4
5
6
55.2500
61.2500
67.2500
77.2500
83.2500
88.1000
107.9000
175.2500
181.2500
187.2500
193.2500
199.2500
205.2500
211.2500
73.2625
55.2625
61.2625
67.2625
77.2625
83.2625
UHF and
ultraband
see low-midband channels 95-99
7
8
9
10
11
12
13
175.2500
181.2500
187.2500
193.2500
199.2500
205.2500
211.2500
174.0087
180.0090
186.0093
192.0096
198.0099
204.0102
210.0105
175.2625
181.2625
187.2625
193.2625
199.2625
205.2625
211.2625
midband
14
15
16
17
18
19
20
21
22
121.2625
127.2625
133.2625
139.2500
145.2500
151.2500
157.2500
163.2500
169.2500
120.0060
126.0063
132.0066
138.0069
144.0072
150.0075
156.0078
162.0081
168.0084
121.2625
127.2625
133.2625
139.2625
145.2625
151.2625
157.2625
163.2625
169.2625
superband
23
24
25
26
27
28
29
30
31
32
33
34
35
36
217.2500
223.2500
229.2625
235.2625
241.2625
247.2625
253.2625
259.2625
265.2625
271.2625
277.2625
283.2625
289.2625
295.2625
216.0108
222.0111
228.0114
234.0117
240.0120
246.0123
252.0126
258.0129
264.0132
270.0135
276.0138
282.0141
288.0144
294.0147
217.2625
223.2625
229.2625
235.2625
241.2625
247.2625
253.2625
259.2625
265.2625
271.2625
277.2625
283.2625
289.2625
295.2625
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
301.2625
307.2625
313.2625
319.2625
325.2625
331.2625
337.2625
343.2625
349.2625
355.2625
361.2625
367.2625
373.2625
379.2625
385.2625
391.2625
397.2625
403.2500
409.2500
415.2500
421.2500
427.2500
433.2500
439.2500
445.2500
451.2500
457.2500
463.2500
300.0150
306.0153
312.0156
318.0159
324.0162
330.0165
336.0168
342.0171
348.0174
354.0177
360.0180
366.0183
372.0186
378.0189
384.0192
390.0195
396.0198
402.0201
408.0204
414.0207
420.0210
426.0213
432.0216
438.0219
444.0222
450.0225
456.0228
462.0231
301.2625
307.2625
313.2625
319.2625
325.2625
331.2625
337.2625
343.2625
349.2625
355.2625
361.2625
367.2625
373.2625
379.2625
385.2625
391.2625
397.2625
403.2625
409.2625
415.2625
421.2625
427.2625
433.2625
439.2625
445.2625
451.2625
457.2625
463.2625
hyperband
7
8
9
10
11
12
13
72.0036
54.0027
60.0030
66.0033
78.0039
84.0042
band
BROADCAST
chnl
off-air
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
471.2500
477.2500
483.2500
489.2500
495.2500
501.2500
507.2500
513.2500
519.2500
525.2500
531.2500
537.2500
543.2500
549.2500
555.2500
561.2500
567.2500
573.2500
579.2500
585.2500
591.2500
597.2500
603.2500
609.2500
615.2500
621.2500
627.2500
633.2500
639.2500
645.2500
low-midband
UHF and
ultraband
continued
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
ultraband continued
linearcorp.com / 1 800 421 1587
651.2500
657.2500
663.2500
669.2500
675.2500
681.2500
687.2500
693.2500
699.2500
705.2500
711.2500
717.2500
723.2500
729.2500
735.2500
741.2500
747.2500
753.2500
759.2500
765.2500
771.2500
777.2500
783.2500
789.2500
795.2500
801.2500
chnl
CABLE TELEVISION
std
hrc
irc
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
469.2500
475.2500
481.2500
487.2500
493.2500
499.2500
505.2500
511.2500
517.2500
523.2500
529.2500
535.2500
541.2500
547.2500
553.2500
559.2500
565.2500
571.2500
577.2500
583.2500
589.2500
595.2500
601.2500
607.2500
613.2500
619.2500
625.2500
631.2500
637.2500
643.2500
468.0234
474.0237
480.0240
486.0243
492.0246
498.0249
504.0252
510.0255
516.0258
522.0261
528.0264
534.0267
540.0270
546.0273
552.0276
558.0279
564.0282
570.0285
576.0288
582.0291
588.0294
594.0297
600.0300
606.0303
612.0306
618.0309
624.0312
630.0315
636.0318
642.0321
469.2625
475.2625
481.2625
487.2625
493.2625
499.2625
505.2625
511.2625
517.2625
523.2625
529.2625
535.2625
541.2625
547.2625
553.2625
559.2625
565.2625
571.2625
577.2625
583.2625
589.2625
595.2625
601.2625
607.2625
613.2625
619.2625
625.2625
631.2625
637.2625
643.2625
95
96
97
98
99
91.2500
97.2500
103.2500
109.2750
115.2750
90.0045
96.0048
102.0051
108.2500
114.2500
91.2625
97.2625
103.2625
109.2750
115.2750
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
649.2500
655.2500
661.2500
667.2500
673.2500
679.2500
685.2500
691.2500
697.2500
703.2500
709.2500
715.2500
721.2500
727.2500
733.2500
739.2500
745.2500
751.2500
757.2500
763.2500
769.2500
775.2500
781.2500
787.2500
793.2500
799.2500
648.0324
654.0327
660.0330
666.0333
672.0336
678.0339
684.0342
690.0345
696.0348
702.0351
708.0354
714.0357
720.0360
726.0363
732.0366
738.0369
744.0372
750.0375
756.0378
762.0381
768.0384
774.0387
780.0390
786.0393
792.0396
798.0399
649.2625
655.2625
661.2625
667.2625
673.2625
679.2625
685.2625
691.2625
697.2625
703.2625
709.2625
715.2625
721.2625
727.2625
733.2625
739.2625
745.2625
751.2625
757.2625
763.2625
769.2625
775.2625
781.2625
787.2625
793.2625
799.2625
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
805.2500
811.2500
817.2500
823.2500
829.2500
835.2500
841.2500
847.2500
853.2500
859.2500
865.2500
871.2500
877.2500
883.2500
889.2500
804.0402
810.0405
816.0408
822.0411
828.0414
834.0417
840.0420
846.0423
852.0426
858.0429
864.0432
870.0435
876.0438
882.0441
888.0444
805.2625
811.2625
817.2625
823.2625
829.2625
835.2625
841.2625
847.2625
853.2625
859.2625
865.2625
871.2625
877.2625
883.2625
889.2625
Linear Audio / Video / Data Solutions
76 Glossary Of Terms
Adjacent Channels: Two television channels
having video carriers 6 MHz apart, or two FM
channels having carriers occupying neighboring
channel allocations
Decibel: Abbreviation dB; a logarithmic function
used to simplify MATV calculations; decibels can
be added or subtracted; 0 dB is the standard
reference level for all MATV calculations
Patch Cords: The cords interconnecting
terminations at the central distribution panel;
typically these cords are terminated with
modular plugs
Amplifier: A device used to increase the power
and voltage level of a signal
dBmV: An absolute signal level where 0 dBmV is
equal to 1000 μV across 75 ohms
RF (Radio Frequency): Generally refers to data
modulated over a high-frequency carrier for
wireless transmission
Attenuator: A passive device used to reduce
signal strength
Egress: A condition often called “signal leakage”
in which signals carried by the distribution
system radiate into the air
Baseband: A data signal that has not been
modulated onto a carrier (e.g., Hi-Fi Audio,
NTSC Video, or RS-232 Data)
BID: Bi-directional, as in systems used with
CATV services using pay-per-view or cable
modems; BID is not for use with off-air antennas
Cable Back-Feed: Signals from an inserted
modulated channel that travel back into the
cable source. Using a modulator on a cable
service provider’s system (CATV or MATV)
requires a mixing amplifier or filter (NF-469) to
prevent the signal from back-feeding into the
cable or antenna system.
Category Rated: Twisted pair communications
circuits are rated by category, specifications for
which are covered under EIA/TIA 568; the higher
the category number, the higher the information
capacity of the circuit
CATV (Community Antenna Television): An RF
distribution system that distributes television
broadcast programs, original programs,
premium programming, and other services
using a network of coaxial cable
Channel: In television, a portion of the RF
spectrum, 6 MHz wide, that carries the audio and
video carriers of the television signal
CO (Central Office): A reference to the local
telephone exchange carrier
Coaxial Cable: A concentric cable consisting of
a center conductor, a dielectric, and a shield;
coax used for most MATV and CATV work has a
characteristic impedance of 75 ohms
Composite Video Signal: The composite video
signal including the picture (luminance) signal,
the blanking and sync pulses, and the color
(chrominance)
Cross Connect: The physical connection
between patch panels or punch-down blocks
that facilitates connections from systems and
feeds to drops
Crosstalk: The unwanted introduction of signals
from one channel to another
Filter: Fibers are used to block out undesired
frequencies; there are two types of filters—band
pass and rejection; a band pass filter permits
only the desired range to pass through, while the
rejection filter attenuates an undesired range of
frequencies
Gain: A measure of amplification of a device,
usually expressed in dB at the highest frequency
of operation
Ghosting: A signal interference condition
producing positive or negative pictures
displaced in time from the desired picture,
caused by multi-path signal reception; ghost
pictures also result from cable ringing
HDTV (High-Definition Television): A highresolution, wide-screen common picture
format and transmission standard for bringing
broadcast television to the home
Head End: The equipment located at the start of
a CATV system; the place where the signals are
processed and combined prior to distribution
HHR: A high-head-room amplifier used in highperformance off-air antennas or non-bidirectional CATV systems
Ingress: A condition where an unwanted RF
signal leaks into a distribution system
Insertion Loss: Also called “feed through loss”;
this is the loss that occurs as signals pass
through a passive device; insertion loss occurs
in all devices that do not amplify the signal
MATV (Master Antenna Television System):
A distribution system that is usually contained
within a single building and receives its signals
from an antenna or CATV system
Modulation: Placing information, audio/video,
onto a higher frequency carrier by means of
amplitude, frequency, or phase adjustment
Off-Air: Any channel that can be received by a
conventional antenna system, including VHF and
UHF broadcasts
linearcorp.com / 1 800 421 1587
RG-6 Cable: A coaxial cable used for broadband
video applications; RG-6 has an 18-gauge
center conductor, allowing a higher bandwidth
than the RG-59 cable, which has a smaller 20gauge center conductor; RG-6 uses standard
“F” connectors for video equipment connections
Signal Strength: The intensity of an RF signal
measured in volts (V), millivolts (mV), microvolts
(mV), or dBmV
Signal-to-Noise Ratio (S/N): The ratio of desired
signal level to the undesired noise level
expressed in dB
Snow: A large quantity of random noise in a
television picture that results from a poor CON
(earner-to-noise) ratio
TAP: A device inserted into a feeder line that
allows a specific amount of signal to be removed
from the feeder line and isolates the TAP port
from the main through line
Terminator: A resistive device that matches a
cable or the unused output of an active or
passive system component to its characteristic
impedance; proper termination is required to
prevent unused portions from causing
reflections back down to the line
Tilt: A linearized change in the frequency
response of the CATV system, caused primarily
by the frequency-dependent cable loss; tilt is
quantified by comparing the difference between
the level of the highest channel’s video carrier
and that of the lowest channel
UHF (Ultrahigh Frequency): Off-air television
channels 14 to 83
UTP (Unshielded Twisted Pair): Twisted pair
cable without either individual or overall
shielding
VHF (Very High Frequency): Off-air television
channels 2 to 13
100BASE-T: 100 Mbps 802.3/Ethernet over
standard unshielded twisted pair cable
specification; 100BASE-T supports network
configurations over twisted pair transmission
systems up to 100 meters in length without
the use of a repeater
Linear Audio / Video / Data Solutions
Linear Training 77
Training Outline
& Types
Technical Services is the group within Linear LLC that administers
Continuing Education Unit (CEU) activities, courses, and
programs. Technical training ensures the education and meets the
goals of the dealers, distributors, and others who sell the Linear
LLC branded products.
Phase 1: Marketing and Investment Strategies—This presents
how our products fit into the market segment. It will outline market
share and profitability while showing projected future growth
and outlook of product segments. It will show how to leverage
your investment into our broad product offerings and maximize
profitability.
The technical training manager reviews the policies and
procedures and ensures they meet accreditation requirements
for CEUs. Linear LLC accredits their training through the National
Burglar & Fire Alarm Association (NBFAA) service of the National
Training School. The review process for every program occurs
every two years at a minimum.
Phase 2: Sales Training—This covers creating the right
expectations for your customers. It goes over qualification
questions to ask in order to qualify design to meet customer
expectations. It also explains features and advantages by product,
enabling you to differentiate products in a way your customer will
understand.
Linear will ensure the training provides adequate resources
to support a positive learning environment. Instructors will be
available to provide assistance and support to students.
Phase 3: Design and Installation Training—This is a brief
product overview and explanation of installation and rough-in
guidelines. The owner’s manuals are reviewed (more than just
packing material!). Configuration and system testing is illustrated.
Instruction is given to show the customer how to use their new
products in their home.
When students meet the requirements for satisfactory completion
of the training program, they are issued a certificate that indicates
the title of the program, the name of the instructor, and the
number of CEUs for the program. Training in Texas will result in an
additional form with the instructors’ numbers annotated for state
requirements.
Linear maintains the records for approximately one year and can
reissue certificates if desired. Information collected during training
is only for the use of documenting students attending class and is
not sold, released, or transferred for any other purposes.
Linear training is provided by qualified personnel with many
years of experience in the field and competence in their topic of
instruction. They also have knowledge and skill in instructional
methods and learning processes. Feedback is encouraged and
collected. Instruction is provided with no discrimination, and
the trainers are not compensated for any activity other than for
classroom instruction.
Linear offers three types of training through learnlinear.com
Type 1: Instructor Lead Training—On-Site Training
We have product trainers and a sales management team who
travel the U.S. to provide training at your facility or at a local
distributor. This is a more traditional, classroom-style training
option.
Linear programs are divided into four phases of courses. Many
of Phase 3 and Phase 4 classes are NTS-approved for installers
needing Continuing Education Units (CEUs).
Phase 4: Troubleshooting and Advanced Theory—Very specific
installation techniques are explained. Navigating troubleshooting
guides and EMI and RFI influences are explored. Chronic problem
installations and their root causes, as well as steps required that
help avoid future call outs, are illustrated.
Type 2: Instructor Lead Training—Computer-Based Training
A product trainer remotely teaches a course using
teleconferences and computer software to present the material.
Since a live instructor is leading the training, these classes are
scheduled.
Linear offers the ability to take most of the on-site training
presentations over the Internet, with an instructor leading the
training.
Type 3: Self-Paced Training—Computer-Based
This is similar to taking online college classes. From the
convenience of either home or office, you can take classes at your
own pace and return to previous sessions should you need to
stop mid-class.
If you have any questions, feel free to email at
techsupport@linearcorp.com or call 1-800-421-1587 and ask for
our training manager.
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
78 Technical Support
Linear’s
Technical
Services
Support
Linear’s Technical Services Department provides telephone support for our expanding
product line. The group supports nearly 1,000 products in various types of installations
and applications. Application engineers can assist dealers and installers with their
technical questions regarding every Linear product.
The application engineers answer questions regarding equipment installation,
programming, system design, troubleshooting, and inter-system compatibility.
Questions could be about radio controls, security systems, access controls, door
operators, gate operators, audio or video equipment, and accessories. Often, installers
simply need fast help with their installation issues so they can complete the job and
continue on to the next installation. Linear’s quality and professional technical support
staff provides that service.
The new extended Technical Services Department telephone service hours (5:00
AM to 4:30 PM Pacific Time) will be of value to nationwide installers and company
representatives alike. West Coast callers will be able to call as early as 5:00 AM local
time, and East Coast callers will be able to call as late as 7:30 PM local time.
Linear Technical Services provides direct access to the people who know Linear
products best. To speak with a Linear expert, call 1-800-421-1587 and press 3.
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Manufacturing Facilities 79
State-of-the-Art
Manufacturing
Facility
Sound plans implemented with quality products and solutions to support them are critical
to success in today’s competitive global business environment. With a state-of-the-art
manufacturing facility in China, Linear uses industry-leading manufacturing technologies
that enable production of quality products that consistently raise the standard in home
technology and provide a value you can depend on in today’s competitive marketplace.
High-performance production tools, advanced technologies and techniques in design
and testing, integrated circuitry, microchip, and surface mount technology, as well as the
latest electronic component assembly and quality assurance techniques are features you
can depend on from Linear manufacturing. Linear’s Hong Kong manufacturing operation
boasts a staff of more than 1,300 and is ISO 9001:2000 quality system certified.
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
80 Distribution Centers
West & East
Distribution
Centers
To streamline order fulfillment and shorten delivery time for Linear distributors and dealers, Linear LLC
maintains two fully stocked regional distribution facilities in Vista, California, and Summerville, South
Carolina.
Linear’s Western Distribution Center has 90,000 square feet with 19 shipping docks.
Linear’s Eastern Distribution Center boasts 175,000 square feet with 25 shipping docks
and is the third largest UPS shipper in the Charleston, South Carolina, area.
Both warehouse locations are completely equipped with shipping, receiving, and quality
control facilities, and they each stock tens of thousands of Linear products for security,
entry systems, communications, audio/video/data, central vacuum systems, and personal
emergency response. Each warehouse team receives dozens of cargo containers each
month, processes hundreds of orders daily, and ships thousands of packages with Linear
goods to worldwide destinations each day.
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
Index 81
PRODUCT
ORDER #
PAGE
PRODUCT
ORDER #
PAGE
2010
2100A
2130A
2131
2132
2133
2171
2172
2181
2184
219558
226888
2501-10
2503-10
2506-10
2507-10
2509-10
2512
2514
2532
2534
2538
2619
2620
2743
3015
3025
350-086
350-100
350-101
350-102
350-103
5415
5425
5435
5445
5515
5525
5545
5555BID
5555HHR
5557BID
5557HHR
5558BID
5558HHR
999-017-01
C-BACK
COMP-2-HDMI-AD
COMP-CAT5-EXT
COMP-DA-1X3
COMP-DA-1X8
DA-500A
DA-506BID
DA-520A
DA-550BID
DA-550HHR
DA-8200BID
DA-8200HHR
DMC-10AWP
DMC-10DFAB-4
DMC-10DFBB-4
DMC-10DFSN-4
DMC-10DFW-4
DMC-10DPW-4
DMC-10DS
DMC-10H
DMC-10KIT
DMC-10PFAB-4
DMC-10PFBB-4
DMC-10PFSN-4
DMC-10PS
DMC-10RFA-4
DMC-10RFB-4
DMC-10RFW-4
DMC-10RS
DMD-16
DMT-16
DMT-24
2010
2100A
2130A
2131
2132
2133
2171
2172
2181
2184
219558
226888
2501-10
2503-10
2506-10
2507-10
2509-10
2512
2514
2532
2534
2538
2619
2620
2743
3015
3025
350-086
350-100
350-101
350-102
350-103
5415
5425
5435
5445
5515
5525
5545
5555BID
5555HHR
5557BID
5557HHR
5558BID
5558HHR
999-017-01
C-BACK
COMP-2-HDMI-AD
COMP-CAT5-EXT
COMP-DA-1X3
COMP-DA-1X8
DA-500A
DA-506BID
DA-520A
DA-550BID
DA-550HHR
DA-8200BID
DA-8200HHR
DMC-10AWP
DMC-10DFAB-4
DMC-10DFBB-4
DMC-10DFSN-4
DMC-10DFW-4
DMC-10DPW-4
DMC-10DS
DMC-10H
DMC-10KIT
DMC-10PFAB-4
DMC-10PFBB-4
DMC-10PFSN-4
DMC-10PS
DMC-10RFA-4
DMC-10RFB-4
DMC-10RFW-4
DMC-10RS
DMD-16
DMT-16
DMT-24
36
36
36
36
36
36
37
37
37
37
62
62
34
34
35
35
33
33
33
33
33
33
41
41
62
18
18
62
62
62
62
62
19
19
19
19
20
20
20
21
21
22
22
23
13
62
35
35
11
8
9
15
15
15
16
16
16
17
31
32
32
32
32
32
31
30
29
32
32
32
31
32
32
32
31
25
25
25
DS3B2
FSHW
FSHWB
H000
H001
H008
H011
H200
H205
H208
H270
H271
H272
H275
H281
H282
H283
H290
H291
H312KIT
H318
H336
H611
H616
H618
H619
H628
H629
H691
H692
H801
H802
H803
H804
H806
H808
H816BID
H838BID
H838HHR
HC18A
HC36A
HD18
HD36
HDMI-DA-1X8
HDMI-DA-2X8M
HDMI-MX-4X4
HDMI-SB
HDMI-SW-2X2M
HDMI-SW-2X4M
HDMI-SW-3X1
HDMI-SW-4X1
HDMI-SW-4X2M
HTWP
HTWP7
IM1
IM1D
IR-EXTENDER
LPF-380
LPF-470
LPF-600
LPF-750
MB-55
MB-56
MCS-1A
MCS-2A
MDS-6A
MDS-6A KIT#1
MDS-6A KIT#2
MDS6A-REM
MDS-LLK
MDS-PCK
MNC
MNCC
MNCS
MNCX
MNCXB
MNCXCB
MNCXS
DS3B2
FSHW
FSHWB
H000
H001
H008
H011
H200
H205
H208
H270
H271
H272
H275
H281
H282
H283
H290
H291
H312KIT
H318
H336
H611
H616
H618
H619
H628
H629
H691
H692
H801
H802
H803
H804
H806
H808
H816BID
H838BID
H838HHR
HC18A
HC36A
HD18
HD36
HDMI-DA-1X8
HDMI-DA-2X8M
HDMI-MX-4X4
HDMI-SB
HDMI-SW-2X2M
HDMI-SW-2X4M
HDMI-SW-3X1
HDMI-SW-4X1
HDMI-SW-4X2M
HTWP
HTWP7
IM1
IM1D
IR-EXTENDER
LPF-380
LPF-470
LPF-600
LPF-750
MB-55
MB-56
MCS-1A
MCS-2A
MDS-6A
MDS-6A KIT#1
MDS-6A KIT#2
MDS6A-REM
MDS-LLK
MDS-PCK
MNC
MNCC
MNCS
MNCX
MNCXB
MNCXCB
MNCXS
47
56
56
42
42
40
40
40
40
42
41
42
42
41
42
42
42
41
41
38
38
39
26
26
27
27
26
26
42
42
27
27
28
28
28
28
15
17
17
38
39
39
39
9
10
10
12
6
6
7
7
8
61
61
60
60
12
34
34
34
34
31
41
41
45
45
44
44
45
45
45
50
50
50
51
51
51
52
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
82 Index
PRODUCT
ORDER #
PAGE
MNCXSB
MNCXSM
MR6C
MR6W
MR8C
MR8W
NF-469
NF-470
NF-471
PACKHTNS
PSW108
PSW112
ROCK8G
ROCK8R
S100C
S100W
S40C
S50C
S50CKIT
S50W
SCALER-2-1080P
SL2
SL4
SL1
SVC-10
SVC-10R
SVD-8
SVM-22
SVM-24
TC-200A
V902
WG100C
WG100W
WG150C
WG150W
WPW-D7.1
WPx-DD
WPx-DP
WPx-PC
WPx-PDC
WS5
XDM4600KIT
XDM46EH
XDM46K
XDM46KAF
XDM46KBF
XDM46R
XDMCKIT
XDMIRE
XDMWP
MNCXSB
MNCXSM
MR6C
MR6W
MR8C
MR8W
NF-469
NF-470
NF-471
PACKHTNS
PSW108
PSW112
ROCK8G
ROCK8R
S100C
S100W
S40C
S50C
S50CKIT
S50W
SCALER-2-1080P
SL2
SL4
SL1
SVC-10
SVC-10R
SVD-8
SVM-22
SVM-24
TC-200A
V902
WG100C
WG100W
WG150C
WG150W
WPW-D7.1
WPx-DD
WPx-DP
WPx-PC
WPx-PDC
WS5
XDM4600KIT
XDM46EH
XDM46K
XDM46KAF
XDM46KBF
XDM46R
XDMCKIT
XDMIRE
XDMWP
52
52
59
59
59
59
33
33
33
58
53
53
56
56
58
58
57
57
57
57
13
61
61
60
14
14
14
24
24
35
35
54
54
55
55
61
43
43
43
43
56
46
46
47
48
48
47
49
49
47
linearcorp.com / 1 800 421 1587
Linear
—
Audio, Video & Data Solutions
Linear LLC 1950 Camino Vida Roble, Ste.150, Carlsbad, CA 92008 USA
1 800 421 1587 / linearcorp.com
Copyright 2008, Linear LLC
P/N 228655A
Printed in China