Philips 37PF9631D - annexe 1 Instruction manual

Registering your model with PHILIPS makes you eligible for all of the valuable benefits
listed below, so don't miss out. Complete and return your Product Registration Card at
once to ensure:
Know these
safety symbols
PHILIPS
Congratulations on your purchase, and
welcome to the "family!"
Dear
PHILIPS
product
owner:
This "bolt
Thank you for your confidence in PHILIPS.You've
selected one of the best-built, best-backed
products
available today.We'll
our power
purchase
to protection
your
networks
purchase
information
by one of the most
warranties
and outstanding
in the industry.What's
guarantees
you'll
and special offers
receive
for which
qualify, plus easy access to accessories
convenient
home shopping
Most importantly,
uncompromising
satisfaction.
more,
WARNING:To
all the
electric shock, this apparatus
should not be
exposed to rain or moisture and objects
filled with liquids, such as vases, should not
be placed on this apparatus.
you
from
our
network.
you can count
commitment
on our
to your
total
All of this is our way of saying welcome - and
thanks for investing in a PHILIPS product.
P.S. To get the most from your PHILIPS
purchase, be sure to complete and return
your Product Registration Card at once, or
register online at:
www.philips.com/usasupport
indicates
The "exclamation
point" calls attention
S
to features for which you should read
the enclosed literature closely to prevent
operating and maintenance problems.
of the PHILIPS "family," you're
comprehensive
service
in
your
for many years to come.
As a member
entitled
do everything
to keep you happy with
of lightning"
t
uninsulated material within your unit
may cause an electrical shock. For the safety
of everyone in your household, please do not
remove product covering.
reduce
the risk of fire or
CAUTION:
To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.
ATTENTION
: Pour eviter les chocs
Nectriques, introduire la lame la plus large de
la fiche dans la borne correspondante de la
prise et pousser jusqu'au fond.
For Customer
Use
Enter below the Serial No., which is
located on the rear of the cabinet. Retain
this information for future reference.
Model No.
Serial No.
IMPORTANT
SAFETY
Read before
1.
Read these
instructions.
2.
Keep these
instructions.
3.
Heed
4.
Follow
5.
Do not
operating
B.
all warnings.
use this apparatus
near water.
Clean
Do not block any of the ventilation
accordance
with the manufacturers
a dry cloth.
8.
Do not
install
registers,
produce
heat.
Do not
defeat
or other
C.
The appliance
D.
The appliance
does not appear to operate
exhibits a marked change in performance;
E.
The appliance
wider
othen
the
purpose
10. Protect
the
stability
• Do
amplifiers)
polarized
plug has two
that
type
with
plug has two
an electrician
for
from
at plugs, convenience
exit from
the
of the
Use only with
and the point
this apparatus
long periods
combination
14. Refer
bracket,
or
to avoid
when
lightning
storms
service
the apparatus
injury
of the
wire
from
or when
personnel.
has been damaged
for
tilt
and
by applying
or children,
on the top
outdoor
to the
antenna
Grounding
receiver,
cabinet
which
by placing
of the
cabinet.
should
Such
set and
unused
- If an outside
some
protection
Servicing
is
mats and supporting
antenna
system
is
is
against voltage
Code,
respect
structure
ANSI/NFPA
to proper
grounding
No. 70-
grounding
of the
lead-in
unit, size of grounding
of antenna-discharge
and requirements
Liquid
Entry
- Care
do not fall and liquids
through
away
for
unit, connection
the grounding
to
See Figure below.
and
objects
in any way,
with
to an antenna-discharge
electrode.
he located
he sure the antenna
information
connectors,
location
grounding
electrodes
should
are not
be taken so that
spilled
into the
enclosure
openings.
such as powet_supply
cord or plug is damaged, liquid has been
spilled or objects have fallen into apparatus, the apparatus has
a) Warning:To
reduce the risk of fire or electric shock, this
apparatus
should not be exposed to rain or moisture
and
been exposed
objects
filled with
on this
apparatus.
to rain or moisture,
does
not
operate
normally,
or has been dropped.
15. This product
materials
may contain
Alliance:
lead or mercury.
may be regulated
considerations.
contact your
Disposal
of these
22. Battery
due to environmental
Requiring
by qualified
The power
EXAMPLE
NATIONAL
supply
Service
service
-The
cord or the
OF ANTENNA
appliance
personnel
not mix
-To
prevent
injury, property
correctly,
batteries
not
be placed
battery
leakage that
damage, or damage
with
+ and - alignment
(old and new or carbon
to the
as marked
and alkaline,
etc.)
plug has been damaged;
CODE
be
when:
GROUNDING
ELECTRICAL
should
• Do
such as vases should
CAUTION
in bodily
• Install all batteries
on the unit.
www.eiae.org.
serviced
liquids,
Usage
may result
unit:
For disposal or recycling information,
please
local authorities
or the Electronic
Industries
16. Damage
A.
yourself,
so as to provide
21. Objects
to qualified
-An
1984, provides
of time.
all servicing
required
during
standards
surges and built up static charges.
Section 810 of the National
Electric
tip-oven
13. Unplug
safety standards
lines.
Antenna
grounded
by the
a cart, stand, tripod,
cart/apparatus
Lines
power
connected
specified
endanger
damaged.
with
design.
these design
equipment/toys
20. Outdoor
table specified by the manufacturer,
or sold with
the apparatus.When
a cart is used, use caution when
the
Power
from
apparatus.
11. Only use attachments/accessories
manufacturen
global
of its cabinets
not compromise
comply
18. Wall
or Ceiling
Mounting
-The appliance should be
mounted
to a wall or ceiling only as recommended
by the
manufacturer.
on or pinched
receptacles,
or the enclosure
must
or
blades
replacement
being walked
where
moving
international
normally
or
items could unsuspectingly
fall from the top of the
cause product
damage and/or personal
injury.
one
19.
cord
to rain;or
has been dropped,
properties
electronic
or
blades
into the
excessive pull force to the front, or top, of the
could ultimately
overturn
the product.
heat
wide blade or third prong are
the provided
plug does not fit
particularly
12.
(including
A grounding
consult
power
they
in
such as radiators,
of the
A polarized
grounding
prong.The
for your safety.When
into your outlet,
obsolete
outlet.
has been exposed
- All televisions
• Also, do not
plug.
than
sources
apparatus
the safety
grounding-type
and third
provided
openings. Install
instructions.
has been spilled
or
recommended
near any heat
stoves,
have fallen, or liquid
17. Tilt/Stability
7.
for
Objects
all instructions.
only with
equipment
appliance;
6.
9.
INSTRUCTIONS
• Remove
or
batteries
when
the
unit is not
used for
a long time.
AS PER
(NEC)
GROUND CLAMP
ANTENNA
LEAD INWIRE
ANTENNA
DISCHARGE
UNIT
(N£C SECTEON 810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND
ELECTRIC SERVICE EQUIPMENT
CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Note
the
to the
NEC
grounding
CATV
system
that provides
system
of the
installer:
guidelines
building,
for
this reminder
proper
as close
grounding
to the point
is provided
to call the
and, in particulat_
of cable
entry
CATV
specifies
as practical.
system
that
installer's
the cable
ground
attention
to Article
shall be connected
820-40
to the
of
This manual contains all information you will need to initially install and operate your newTM
Also read the help texts which are being displayed at the bottom of the screen.
Help?
If this instruction manual does not give an answer or if'Before Calling Service" does not solve your TV problem.
you can call your Local Philips Customer or Service Centre. See the supplied World-wide guarantee booklet.
Please. have the Model and Serial number which you can find at the back of your television set or on the
packaging, ready, before calling the Philips helpline 1-888-PHtLtPS (744-5477)
Modek 37PF9631D/37
Serial No:
Connect:
aVCR or DVD
Safety warnings
.........................
2
Getting
.........................
3
a recorder
a recorder
RF output
a satellite
started
Use of the remote
Buttons
RC4348
........
6
on the right side of theTV
control
........
9
My content
............................
Turn theTV on ........................
First time installation
...................
How
How
9
10
10
to navigate through the menus .......
to search for and storeTV
channels
11
.. 12
Use of the Setup menu
.................
Use of the TV menu settings .............
Adjust picture menu settings ..........
Adjust sound menu settings
..........
Adjust feature menu settings ..........
Enjoy Ambilight
....................
Control TV channels' special functions
16
21
22
24
25
26
.. 28
Multimedia
Browser
....................
To make video and audio connections
Side panel overview
Rear panel overview
....................
...................
32
.....
35
36
37
recorder
38
.............
and other A!V devices
and Cable box with "
......
.........................
receiver or Cable box with
A/V outputs ........................
a recorder
and satellite receiver
39
43
41
or Cable
box with A!V outputs
...............
a DVD playe_, or other accessory
source devices ......................
a device to the HDMI connector
42
digital
......
43
44
a Digital Surround receiver ...........
Record with your recorder
..............
Select connected
equipment
.............
Audio and video equipment
buttons
.......
45
45
45
46
Before calling service ...................
Glossary .............................
47
48
Annex 1 - Philips TV software
upgrade
with portable
memory ...............
Annex 2 - Philips TV-Slideshow
Format
with background
music ..............
Annex 3 - Philips TV - Digital camera
and USB issues .....................
Annex 4 - Issues referring
to connected
peripherals
with a HDMI connector
49
51
53
....
54
Index ................................
55
Recycling .............................
Product information
....................
56
56
m
m
m
m
m
El
_m
m
m
m
m
m
m
1
Do not insert the power
connections
are made.
plug in a wall
"_
socket
or hang theTV
to the wall before
all
• Place or hang the TV wherever you want, but make sure that
air can circulate freely through the ventilation slots. Leave at
least 4" to 6" free all around theTV.
• Do not place the TV on a carpet.
• Do not install theTV in a confined
case or a similar unit.
space such as a book
• To prevent any unsafe situations, no naked flame sources,
such as lighted candles, should be placed in the vicinity.
• Avoid heat, direct sunlight and exposure to rain or water.
• The equipment shall not be exposed to dripping or splashing.
• To prevent damaging the power (AC) cord which could cause a fire or electric shock, do not
place the TV on the cord.
Do not touch, push or rub or strike the screen with anything hard as this may scratch, mar or
damage the screen permanently.
And please do not rub with dust clothes with chemical treatment.
Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the
screen). Unplug the TV before cleaning the screen.
When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials
like chamois soaks. Do not use acetone, toluene and alcohol because they cause chemical damage.
Do not use liquid cleaners or aerosol cleaners.Wipe
off saliva or water drops as soon as possible.
Their long time contact with the screen causes deformations
and color fading.
Installing theTV requires special skills that should only be performed by qualified personnel.You
should not attempt to do the work yourself. Philips bears no responsibility for improper mounting
or mounting that results in accident or injury.
Make sure that the wall mount is being fixed securely enough so that it meets safety standards.
This TV provides the VESA mounting interface (not supplied)
supplied VESA studs to be inserted in the back of the TV.
and is VESA compatible
with the 4
Warning:
donotinsert
thepower
p!ugintothemains
atthebottom
of¢heTV
andinawallsocket
before
allConnections
aremade.
andvideoconnections,
p.35.
AVI can handleYPbPr, VIDEO and L/RAudio,
AV2 can handleYPbPr, VIDEO and L/P, Audio,
AV3 can handleVIDEO,
S-VIDEO and L/R Audio,
HDMI can handle Digital video and audio,
Side can handleVIDEO
or S-VIDEO, LIR Audio
Supported
Warni.g!
video
formats:
and USB,
480i, 480p, 720p, I080i.
disconnec t a!! power sources
before making any Connections.
- Toconnect
acamera,
camcorder
orgame,
seeTo
make
video
andaudio
connections,
p.40.
- Toconnect
aheadphone,
seeTomake
videoandaudio
connections,
p.40.
- To connect
a USB device, see Multimedia
browser,
p. 33.
Your Philips Digital TV will allow you to enjoy digital programs
directly from your cable or off ai_:
Connect
directly to the TV or connect via your current cable
box or Satellite Receiver box.
CABLE
• Directly
-0
to the TV
(you will not be able to receive pay
channels)
1.
!
Connect
the cable TV signal or the incoming
to the CABLE/ANTENNA
the TV.
2.
See page 10 for details on usingAutoprogram
channels in the TV's memory.
to store
, Broadcasters are in _he middle of a transition from ana[0g to
digital TV.This means that a given broadcaster
will have two
channels
on the air, one analog and One digital.
, This connection
will supply stereo sound to theTV if itis
being broadcast
bythe station you are watching .
1.
2.
3.
4.
a cable
box
or Satellite
box
Maintain the connection of the TV cable of your home into
your cable box (or satellite receiver box).
Connect
your Set-top box (or satellite receiver box) to the
back of the TV using the best connection
options. See to
make audio and video connections,
p. 35.
Select the source using the AM+ button on the remote
control.
Press the OK button
to confirm
your
selection.
For more information,
please refer to your
satellite receiver box) manual.
Box
of
Notes:
• Via
Cable
antenna signal
75 £-2 -Ir" jack at the bottom
cable box (or
Note:Watching
the cable box
Cable TV
programs
that
don't
require
Since you've connected the cable TV signal directly to the TV's
tuner, you can also watch the unscrambled programs by simply
tuning to the desired channel.You must first use Autoprogram.
however, to store channels in the TV's memory. See page 13.
This connection will supply stereo sound to the TV if it is
being broadcast by the station you are watching.
Insert the power cord supplied into the mains at the
bottom of the TV and in the wall socket.
Warning:
verify that the power supply Voltage
corresponds to the voltage printed
back of theTV.
Contact
your
local dealer
Insert the 2 batteries
if your
supplied
on the sticker
power supply is different.
(Type R6-1,SV).
Be sure the (+) and (-) ends of the batteries
correctly
(inside of case is marked.)
For most buttons
function.
at the
pressing a button
line up
once will activate the
Pressing a second time will de-activate
it.
When
abutton
enables
multiple
options,
asmall
item in the list.The
immediately.
Attention:
list will be shown. Press repeatedly to select the next
list will be removed automatically after 6 seconds or press OK to remove
this remote
Control can not be programmed
to work
accessory devices,
POWER
Press to turn on/off theTV
Attention:
from or to standby mode.
the TV is never powered
off Completely unless
it is physically unplugged.
DVD/R
CBL
TV
VCR
AUX
Press the SELECT button repeatedly to select one of the
system modes in which the remote control can be used.
If no action is being undertaken within 60 seconds, the
remote control returns to TV mode.
After an action in the selected system mode the remote
control will remain in this mode for 60 seconds and will
then return to TV mode.
•
II I_ 44 _,1_ Audio and Video equipment
buttons
SeeAudio and Video equipment buttons, p. 46.
See Multimedia browser functional buttons, p. 34.
DEMO
Demo
on/off
See p. 12.
CLOCK
on/off
Time display (for max. 10 minutes)
Color
buttons
When functions are attached to the color
color buttons are shown on screen.
1_.4
buttons, the
MY CONTENT
Press to display the My Content
menu on or off, see p. 9.
OK - to activate a setting
- to display the list of channels stored (according to the
selection
made in the Installation
mode - Antenna or
Cable, p. 13.)
- starts playing content
application, p. 33.
MENU
VOL
Settings
menu
in the Multimedia
on/off. See p. 11.
Volume
Press + or - to adjust the volume.
MUTE
Interrupt
the sound
or restore
it.
Browser
AV+
Press repeatedly to select AV|, AV2, AV3, HDNI, Side
or TV channels
when in TV mode, according to where
you connected the accessory devices (p. 35).
Cursor
buttons
Press the cursor buttons
through the menus.
up/down,
left/right
to navigate
Note: If necessary, yo u Can adjust the picture position
the center of the screen with the cursor buttons.
to
A/C H
Press to alternate
and the previously
CH/PAGE
Channel
between
the currently
viewed channel.
viewed
channel
selection
- To browse through theTV channels or sources stored in
the preferred channel list (see p. 31).
- To select between Antenna or Cable TV channels, first
make your selection in the Settings menu, see p.13.
Note:You
don't have _0 start the installation again once
you have searched for and stored the available TV channels !
Numeric
buttons
To select aTV channel.
-
Type the dash
(-) for digital channels.
FAVORITES
- VIEW
To display a list of all channels
marked
(incl. subchannels).
- 3 To add or remove a channel in the favorite
as favorite
list of TV
channels.
INFO
Display information: Press to display (when available)
information
about the selected iV channel and program
accessory device.
OREC
or
no function
Ambilight
- ON/OFF
Press to switch Ambilight On or Off.
For the Ambilight settings, see TV menus, Ambilight,
- MODE
Press this button repeatedly
Ambilight modes.
to toggle through
the
p. 26.
1]_FORMAT
Press this button to summon a list of available display
formats (depending on the receiving signal).This lets you
choose the display format of your preference.
Press this button repeatedly to select another picture
format: Automatic, Super zoom, 4:3, Movie expand 14:9,
Movie expand 16:9, 16:9 subtitle orWide
screen.
Super zoom
Automatic
4:3
.............................
Movie expand14:9
Wide
Movie expand 16:9
16:9subtitle
screen
Automatic
makes the picture fill the screen as much as
possible.
Super zoom removes the black bars on the sides of 4:3
programs
with minimal distortion.
When in Movie expand 14:9, Movie expand 16:9 or Super
zoom picture format, you can make subtitles visible with
the cursor up/down.
Note:With
available.
HD sources not all screen formats
Will be
Should your remote
be lost or broken you can
still change some of the basic settings with the
buttons on the right side of yourTV.
Press the power switch I_ to switch theTV
on,
The
MENU
the Settings
button
can be used
menu without
to summon
the remote
control.
Use:
- the VOLUME
+ and - buttons and the
PROGRAMICNANNEL
+ and - buttonsto
seJectmenu items;
- the MENU
Note;When
button
to confirm
activated
Via the
your
MENU
selection.
button
on the right side of the T V, on!y Exit lets yo u
dismiss the menu,
Navigate to Exit and press the MENU button,
The My Content
menu (and the underlying
Multimedia content
browser)
is intended to contain all content,
services,
applications
you are interested
to consume.
1. Press the O,A button to activate.
2. Press the cursor up/down
to move the highlight up and
clown in the list of menu items.
3.
Press
the cursor
right to go deeper
into the structure.
• Television:
TV
channels
leading to the list of TV channels; the left
panel will contain the analog channel numbers, the one-part
channel numbers and the major channel numbers in case of
two-part digital channels.The right panel will contain the
available subchannels associated with the major channel that
is currently highlighted on the left panel, If there are no
subchannels associated with the currently selected channel
in the left panel, the right panel will remain empty.
• Multimedia:
Contains
(pictures,
p. 27.
the locally connected
audio files) is stored.
devices on which content
See Multimedia browser,
o
o
Press the power switch (_) at the right side of the TV.
An indicator on the front of the TV lights up.
Press the +OH/PAGEbuttons or the POWER
(_) button
on the remote conu'oL
Note:
the first time (and only the first time) you turn on
yourTV, you see aWelcome
screen followed by the
installation
pr0cedure.
See First time installation
be!ow.
1.
2.
3.
After an introduction
screen, you are asked
language of the TV's on-screen-menus.
(The
header and the info on screen continuously
language,)
Press the cursor up/down to highlight your
Press the OK button.
4.
Follow
the on-screen
instructions
to select a
text of the
change
language.
to proceed.
Once you €omp!eted the initial installation
procedure
you
can access the screens from the Settings menu. See p. 11.
If the TV has already been installed before and!0r you want
to change the First time installation
settingsl proceed
with
H0w t0 navigate through
10
the menus, D !! _
A lot of guiding instructions, help texts and messages will be
displayed on your TV when using the menus or when trying to
execute an action,
Please, follow the instructions and read the help texts which are
being displayed on the specific item highlighted.
The color buttons refer to different actions which may be
executed depending on the activated device. Press the
corresponding color button on the remote control to perform
the required action.
1.
Press the MENU
>
button
on the remote
control
The Settings menu appears on the screen.
This menu allows you to access and change
settings
and
preferences.
- TV allows you to adjust your preferred picture, sound
and ambilight settings.
- Setup allows you to control the settings of speciaITV
functions, features and accessory
devices.
- Installation
allows you
• to select your menu language
• to search for and store your TV channels
Settings
• to do a weal< ATSC digital channel installation
• to upgrade your TV software
- Demo allows you to get an idea of the features
TV
2.
that are
part of the television.
Use the cursor up/down to highlight and select a menu item
on the left panel.
> The right panel shows the content of the highlighted
menu item in the left panel.
iiii
Note: Sometimes
not all the
screen. Use the cursor down
llli
Infe
Picture
On the
Use the cursor right to enter the right panel.
> The content of the right panel is moved to the left panel
and the right panel shows the content
highlighted item in the left panel.
Seltings
TV
menu items are visible
to reveal all
Picture
of the newly
Note: In some cases it is important
_hat the picture can
be watched while adjusting the settings,This means that
when the highlight is on the right side panel, the other
menu items hide away.When th e cursor left is pressed
again, the hidden menu items re-apPear an d the highlight
moves to the left pane!,
General:
Info
- Press the OK button
to dismiss the menu.
on the highlighted
item to activate
and
- Press the cursor left to go one menu level up again.
- Press the MENU button to exit the Settings menu.
Note:The
menu
is also dismissed
COlOr buttons (if present)
which may be executed.
referring
by pressing
to certain
one of the
actions
11
Settings
i i:i
Demo
,.
The
Demo
menu
thatare part
1.
2.
3.
4.
Inf0
allows
the user to get an idea of the features
of the television.
Select Demo
in the Settings menu and press the cursor
right.
Highlight a desired demo with the cursor up/down.
Press OK to start playing the highlighted demo.
Press the green color button to automatically
run all demos
in sequence.
Press the red color button to stop the auto run function.
Press the red color button again to exit the demo and to
return to TV mode.
Notes:
-The
selected demo is played once.
, The demos require
stardng the dem0.
Tip;You
no user
wi!! need this Chapter on!y if you Want to Change the installation
Settings
interaction
except
for
settings.
Installation
TV channels.
Installation
i
1.
Press the MENU
button
2.
The Settings
Select Installation
menu appears.
and press the cursor
on the remote
control.
right.
iiliiliiliiliii
Info
1.
2.
3.
12
Select Language
and press the cursor right.
A list of available languages appears.
Select your language and press the OK button
your selection.
Proceed with the Installation menu.
to confirm
Store
S_,ttings
Installal:ion
Autoprogram
TV
channels
After language is set correctly,
store the TV channels.
1.
2.
3.
4.
you can now search for and
Select Autoprogram
in the Installation menu.
Press the cursor right.
Press the OK button.
Select Cable or Antenna
in the Installation mode.
When
Antenna
is selected, the TV will detect antenna
signals and will search for antenna TV (NTSC and ATSC
channels available in your local area.
When Cable is selected, the TV will detect cable
company supplied signals and will search for cableTV
(NTSC,ATSC, QAM modulated) channels available in
your area.
Info
Television
installa[ioh
Installation
mode
Note: Make sure that registration with your cable TV
provider and connection of equipment are completed,
Press the green corresponding color button
control for "Next".
Cable
Note:All
channels must be unlocked
on the remote
in order
to
autoprogram, If requested, enter your PIN code to unlock
a!l channels. See Menu preferences in the SettingsiTV
menu, p, 18,
Previous
e Next
Press the green corresponding
color button on the remote
control for "Start"
to start autoprogramming.
The menu screen disappears and the progress of
autoprogramming
is displayed.
The progress bar indicates the number of analog and
digital TV channels found.
When Autoprogramming
is complete, a message appears
confirming the completion and the TV switches to the
first installed TV channel.
Notes:
• Whe_ you have IockedTV channels while initiating
autoprogram, a message appears asking to enter your PIN code
in order to complete autoprogramming.
• When interrupted, the updated channel information is retained
as well as the not yet updated old channel informauon.
• Background autoprogramming
occurs only when theTV is
turned on.
• Channel information of an ATSC channel is updated only for
the ATSC channel currently tuned.
• Once you have searched for as well the available Antenna as
well as the CableTV channels, they are stored in the memory.
13
Important:After
the installation of the TV channels has been
done, always make a selection in the Installation menu
between Antenna or Cable whether you want to watc h
Antenna TV Channels 0r Cable TV Channels.
Note:
Do not start Autoprogram
but press the red button,
If you make use of a signal splitter do not forget
switch in the corresponding
position.
to pus the
Available channels:
- Cable (analog NTSC or digital QAM): max. from 1 to 135
- Terrestrial (analog NTSC or digital ATSC): max. from 2 to 69
If a tuned channel is not yet in the master channel map, the
TV will attempt to tune the channel and it will be added to
the map.
If the channel is not acquired,
channel is not available.
a message will appear that the
When you tune an audio-only digital subchannel, a display
appears with the message Audio only.
Notes:
- Subchannel
selections
The new standards employed with digital broadcasting make
it possible to receive multiple program channels under a
single major channel hum _er which can be selected by
pressing the digit remote control direct-access channel
number entr)_
- Digital Channel selection delay
Due to the tuning complexity of subchanne[ digital
programming.the
time to select and view a digital channel
may take slightly longer than what the viewer is normalty
accustomed to (as compared to analog channel programs).
Digital channel broadcasts contain program and system data
information that must be processed before the channel
selection can be displayed.
14
Settings
Installation
Weak
channel installation
This allows you to manually tune weal< ATSC channels in
order to adjust the antenna and thus optimize signal quality
for that channel.
i
This is only available forTV
connection (see p. 4).
1.
2.
Info
Settings
V:
channels installed
via an antenna
Select a channelin
the displayed list of TV channels (in the
antenna mode).
The signal strength is displayed and updated continuously
as
you rotate the antenna,
Installation
_i _
_
This menu allows you to upgrade your TV software
USB device.
using a
The USB device must be filled with the appropriate
image (and structure) which can be found on the
www.philips.com/su
pport website.
upgrade
How to upload a new software version
memory device, see Annex 1, p. 49.
on your
portable
Info
Settings
Setup
This menu is used to control the settings
functions, features and accessory
devices.
The
Setup
Preferences
menu
allows
of special TV
you to change
settings
that will
typically be accessed
only occasionally,
The Source
menu allows you to select a source.
The Clock menu allows you to use your TV as a clock, This
setup is necessary
for the correct
working of the Lock after
feature,
i
iiliiliiliiliii
Infe
15
Set
Se[tings
Setup
Preferences
your
preferences
1.
Press the MENU
2.
Select Setup with the cursor down and press the cursor
right to select the Preferences menu.
3.
Press the cursor
preferences.
Press the cursor
Preferences
4.
Picture/sound
Adjust
button.
right again to select Picture/sound
right once more to enter
preferences
picture/sound
Auto
the
menu.
preferences
surround
Sometimes the broadcaster transmits special signals for
Surround sound encoded programs.
When selected Auto surround On, the TV
Info
automatically
switches
to the best surround
sound
mode.
Adjust
features
Caption
preferences
service
This allows you to select the Closed Captions service levels
of analog broadcasting
to be displayed.
Closed Captioning
allows you to read the voice content of
television
programs
on the TV screen. Designed
to help the
hearing impaired, this feature uses on-screen
'text boxes' to
show dialogue and conversations
while the TV program is in
progress. Captions will appear on the screen during
Settings/Setup
captioned
Features prefer,
broadcasts.
1.
2.
Select Caption
service.
Press the cursor right.
3.
Select the desired Caption service:
CC 1,2,3 or4
Dialogue (and descriptions)
for the action
on the
captioned TV program shows on screen.
Usually CC 1 is the most used. CC 2 may be used for
alternate
languages if they are being transmitted.
T 1,2,3 or4
Info
Often used for channel guide, schedules,
bulletin board
information
for Closed Captions
programs, news,
weather
informations
or stock market reports.
Not all Caption services are necessarily
being used by a
TV channel during the transmission
of a Closed Caption
4.
program.
See Closed
turn the
Caption
Caption
in theTV,
service
Features
menu, see p. 22, to
On or Off.
' This television provides display of television closed Captioning conforming
and in accordance with Sections I 5.I 19 of the FCC rules.
with the EIA-608 standard
- The captions do not always use correct spelling and grammar. Not all TV programs and product
commercials are made for broadcast with Closed Caption informadons included. Refer to your
area'sTy
program listings for theTV channels and times of C!osed Caption shows.The captioned
programs are usually noted in theTV !istings with service marks such as !CC!_
16
Digital
caption
service
This allows you to configure the way you choose to view
the digital captioning.
Select one of the digital service channels made available by
the caption provider:
There are 6 standard services.
- Service 1 is designated as the Primary Caption Service.
This service contains the verbatim, or near-verbatim
captions for the primary language being spoken in the
accompanying program audio.
- Service 2 is designated as the Secondary Language Service.
This service contains captions in a secondary language
which are translations of the captions in the primary
Caption Service.
- The other service subchannels are not pre-assigned. It is
up to the discretion of the individual caption provider to
utilize the remaining service channels.
Settings/Setl/p/Pre
fer e nces
Dig, caption opt.
Inf0
Settings, Setl/p, Prefer enc_,,
Digital caption options
This allows you to modify how digital captions are displayed
on your TV.
Select from the following options to change the visual
characteristics of your TV's digital captioning.
- Reset to default
Select this option to reset the digital caption options
back to the captions provider default settings.
o Press the cursor right and press the OK button to
confirm.
- Size
Select this option to select the size of caption display
according to your own preference.
o Select Default (Automatic), Small, Standard
or Large
and press the OK button to confirm.
- Style
Select this option to select the font style of caption
display according to your own preference.
o Select Default,
Honospaced
serif, Serif,
Honospaced
sans serif, Sans serif, Casual, Cursive
or Small caps.
- Text
Select this option to select the text color" or the opacity
of the text box of caption display according to your own
preference.
o Select a color and one of the opacity options.
- Background
Select this option to select the character
background
color or one of the background
opacity options of
caption display according
to your own preference.
o Select a color and one of the opacity options.
Downloaded
rating
table
This allows you to add region
ratings
loci< options
next to
Inf0
your"
current
ones.
Caution: Before activat!ng, please ensure regiona I ratings
are broadcasted.
17
Adjust
menu
preferences
OSD
Settings/Setup
1.
Select OSD.
2.
Press the cursor right to select Minimum
or Normal.
Minimum
to activate the temporarily display of the channel
number/input source when either channel or input are
changed.
Normal to activate the temporarily display of the volume ba_,
after a volume adjustment, as well as of the channel
number/input source when either channel or input are
changed.
Menu preferences
Show
Inf0
emergency
alerts
(EAS)
This allows you to select the alert priority level of the
information disseminated
by the cable operator.The
standard
SCTE18 defines an Emergency Alert signalling method for use
by cable TV systems to signal emergencies
to digital devices
such as digital set-top boxes, digital TVs and digital VCRs.
The Emergency alert signalling scheme defined in the standard
allows a cable operator
to disseminate
emergency
alert
information
related to state and local-level emergencies
and
warnings in a cost-effective
and efficient way, while minimizing
disruption
of programming.
An Emergency alert message will have one of the following
priorities: Low, Medium, High or Maximum.
The Emergency alert message with priority High or Maximum
will always be presented. Low or Medium will be present or
ignored
depending
Important:When
Clock, p, 17),the
The Emergency
information:
on the selected
setting.
the TV clock is Undefined (See Setup
EmergencyA!erts
wi!! be ignore&
Alert message
display will contain
menu,
following
- The Emergency Alert text
- The start time + date
-The end time + date.
1.
Select Show EmergencyAlerts
in the Menu preferences
menu,
2.
Press the cursor right and select one of the Emergency alerts
options:
- Always, when you always want the Emergency alert
messages to be displayed when available;
- Skip low priority,
when you want the messages with low
level to be ignored;
- Skip low/medium
priority,
when you only want the
messages with high priority to be displayed.
Notes:
- Emergency Alert
Signalling is not possible:
- when content browsing;
- with analogue video sources.
- You always have the possibility to remove the message from
the screen.
- The message display will overlap whatever
other message is on the screen
18
menu element
or
Set/Change
PIN
This allows you to set or change
code that is used in the different
1.
the personal 4-digit access
lock functions of theTV.
Select Set or Change
PIN with the cursor down.
If no PIN-code exists yet, the menu item is set to Set
PIN. Follow the instructions
on screen.
If a PIN-code has previously been entered,
the menu
item is set to Change
PIN. Follow the instructions
on
screen,
2.
Enter your
All number
PIN with the digit buttons.
combinations
from 0000 tot 9999
are valid
numbers.
3.
The Menu preferences
menu reappears
confirming that the PIN has been created.
with a message
Important:
you have forgotten
your PIN!
1. Select Change PIN in the Menu preferences menu
and 3ress the cursor right,
2. Press the cursor right to enter the overriding PIN
code 0-7-1-1.
3.
Settings/Setup
Reset
the AV settings
This allows you to reset most of the picture
settings to their predefined
factory states.
Reset AV settings
1.
2.
3.
Inf0
Press the cursor again and enter a new personal 4digit PIN code.The previous code is erased an the new
PIN-code is stored.
and sound
Select Reset AV settings
with the cursor down.
Press the cursor right.
Press the OK button to erase settings and reset them
their default values.
to
19
Settings
Setup
Source
This menu allows you to identify the accessory
connected
to the external
devices you have
inputs/outputs.
Source
1.
2.
Select Source
in the Setup menu.
Press the cursor right to enter the list of types
3.
connected
to the selected input.
Select the accessory
device with the cursor up/down.
> When you select AV1, AV2, AV3, HDMI, Side or
of devices
Analog
In, a list appears allowing you to identify
which type of accessory device is attached to this input.
The TV detects the presence of the connected device
and the signal is routed appropriately,
Inf0
Once you have selected the source type, e,g. DVD, this
source will automatically be selected when your remote
control is in DVD mode, see p, 7, and when you press
the AV+ button on the remote control.
4.
S.
Press the cursor right again to enter the list of types of
devices connected to the selected input.
Select the accessory device with the cursor upldown,
Digital
Audio
The TV can output Digital audio via the DIGITAL AUDIO
OUT connector to an external amplifier or receiven
If your amplifier or receiver has a matching connector for
Digital Audio In, you can connect it with a single cable to
the TV's DIGITAL
AUDIO
OUT,
See To make Video and Audio
receive_; p. 45.
connections,
Digital Surround
Settings
Setup
Clock
H,
This allows you to use yourTV
Note;Adjusting
the clock is necessary for the Correct w0rking
of Lock after (SeeTV settings, Channels, p. 28) features.
Clock
Auto
i
iiliiliiliiliii
Info
as a clock.
clock
mode
I.
Select Clock
2.
3.
Press the cursor right to select the Auto
clock mode.
Press the cursor right to instruct the TV to get the time
automatically or manually.
in the Setup menu,
Note: Mos_ Of the TV Channels ar e not transmitting
dock
information.There
are few cable channels but _chey are at the
end of the channel ring.There
is no clock transmission
in
antenna channels. In such cases either clock extraction
is
taldng a long time or there
20
is no clock.
Auto clock
to Automatic)
With
channel
(only available when Auto clock mode is set
the cursor buttons,
select the channel number
where
time can be found by theTV. Typically time can be found on
PBS (Public Broadcasting System) as well as some other
channels.
Time
- Day
With
(only available when Auto clock mode is set to Manual)
the cursor
and day.
If Auto clock
buttons,
mode
select and enter the correct
Manual
time
has been selected, and no
clock search has been done, the system will keep the
entered time and day,
Time
zone
(only available when Auto clock mode is set to
Automatic)
1.
This function allows you to select your local time zone.
Broadcasted time information will correct the clock display
for your local time,
Select Time zone with the cursor down,
2.
Press the cursor
Daylight
saving
right to select your local time zone,
(only available when Auto clock mode is set to
Automatic)
Daylight saving time is automatically
set by specially
broadcasted
signals,This menu item allows you to disable
the automatic
setting of daylight saving time.This is useful if
you live in an area or state where daylight saving is not
applied, but you receive channels from other areas where
daylight saving signals are broadcasted.
1.
2.
3.
Select Daylight
saving with the cursor down.
Press the cursor right to select Automatic
for automatic
clock correction
for daylight saving time, based on specially
broadcasted
signals,
Select Off to disable automatic
clock correction
based on
the specially
broadcasted
signals,
Note: Changes in Clock Settings are only actiyated
switching to standby,
Settings
TV
This menu allows you to adjust your
and ambilight settings and to control
features and functions.
Note:
1.
2.
Info
Dependent
Press the MENU
preferred
picture, sound
the settings of special TV
on the inpu_ signal, one Or more
button
after
on the remote
menu
control.
The Settings
menu appears on the screen,
Select TV and press the cursor
right.
The TV menu is displayed and gives an overview
menu items you can select,
of the
21
Settings
The Picture menu contains the settings that affect the
quality of the picture.
TV
TV
Note:
Some menu items are not available in Case of HD
SOUrCes,
I.
2.
3.
Info
Select Picture and press the cursor right.
> The Picture menu is moved to the left panel,
Select the menu items with the cursor up/down,
Adjust the settings with the cursor left/right or enter the
list of submenu items with the cursor right.
Select a submenu item with the cursor up/down.
Auto
Settings
Picture
picture
Select Auto picture
to display a list of predefined picture
settings, each corresponding
with specific factory settings,
Personal
refers to the personal preference settings of
picture in the picture menu.
Note:This
Phi!!psTV has been set at the factory
best in bright store environments which typically
to Io0k
use
fluorescent lighting.As your home wil! likely not be as wel!
lit as a store, w# recommend that you cycle through the
vario#s auto picture modes to find the one that best suits
your own viewing conditions,Host
that Natural
is the correct choice.
Inf0
consumerswi!!
fin d
Contrast
Adjusts the intensity of bright parts in the picture but keeps
the dark parts unchanged.
Brightness
Adjusts the light output of the complete picture, which will
mainly affect the darker areas of the picture,
Color
Adjusts the saturation level of the colors to suit your
persona[ preference.
Sharpness
Adjusts the sharpness of fine details in the picture.
Color
temperature
Increases or decreases Warm
(red) and Cool (blue) colors
to suit personal preferences,
Select Cool to give the white colors a blue. Normal
to
give the white colors a neutral, Warm
to give the white
colors a red tint.
22
Digital
processing
- Standard = line doubling eliminates the flicker.
- Pixel Plus = for everyday viewing, Pixel Plus is the most
ideal setting, as it fully processes the image to make every
single pixel the best it can be, improving contrast, sharpness,
picture depth, and color reproduction and brilliance from
every source, including High Definition.
Standard mode is recommended only for very noisy or
poorly mastered sources or for those who find the
smoothness of Pixel Plus (which eliminates judder in the
picture) unsettling.
Dynamic
o
o
contrast
Automatically
makes the contrast in the darker and the
brighter picture areas more noticeable as the image on the
screen changes.
Normally select Medium.
It may be preferred to select
Minimum, Maximum
or Off.
Select one of the settings with the cursor up/down.
DNR
(Digital
Noise
Reduction)
Automatically filters out and reduces the image noise and
improves picture quality when receiving weal< video signals.
Select Off, Minimum,
Medium
or Maximum
according to
the image noise in the picture.
Color
enhancement
Automatically controls green enhancement and blue stretch. It
makes the colors more vivid.
Select On or Off in order to activate/de-activate.
Tint
Allows you to select the color mix (hue) of the picture.
Picture
format
This menu item performs the same as the FORMAT button
on the remote control. See Use of the remote control, p. 8.
Active
Settings/TV
Picture
Active Control
1.
The TV continuously measures and corrects all incoming
signals in order to provide the best picture possible.
Select Active Control.
2.
Press the cursor
values.
3.
Press the cursor right repeatedly
to select the Active Control
values Off, Minimum,
Medium or Maximum.
The picture settings are being optimized continuously.
Those menu items can not be selected.
Press the OK button or wait for the time out to dismiss the
4.
Active Control
Control
Active
Control
right to enter the list of Active Control
display.
Inf0
23
Settings
TV
TV
1.
2.
3.
4.
The Sound menu contains the settings that affect the quality
of the the sound.
Press the MENU button on the remote
control.
> The Settings
menu appears on the screen.
Select TV and press the cursor right.
The TV menu is displayed and gives an overview
menus you can select.
Select Sound
and press the cursor right.
The Sound menu is moved to the left panel.
Select the menu items with the cursor up/clown.
Adjust the settings with the cursor left/right.
of the
Info
Note: Remember, control settings are at normal
levels when the bar scale is entered.
Settings
mid,range
Sound
TV
Auto
sound
Select Auto sound to display a list of predefined
settings, each corresponding
with specific factory
Treble and Bass.
Personal
refers to the personal
sound in the sound menu.
Note;The
moment
preference
yo u are in a predefined
sound
settings
settings
Auto
of
of
sound
setting and you modify a setting in the Sound menu, all
_alues of the menu will overwrite the previ0usly made
personal
setting.
Volume
Info
Allows you to adjust the sound output level.
Balance
Manufactured
Laboratories.
'Dolby'
'Pro
trademarks
under
Logic'
license
and the
of Dolby
from
Allows you to adjust the output of the right and left
speakers to obtain the best stereo reproduction
for your
listening position.
Dolby
double-D
symbol
are
Headphone
volume
Laboratories.
Allows you to control
headphones.
Sound
the level of sound through
the
mode
Allows you to se[ectthe
modes _r more spatial or
surround
sound reproduction
dependent
on the broadcast
signals orsignalsfrom
externalinputs
received.
Alternate
audio
(only selectable with analog broadcast
Gives you the possibility
Second
audio Program
24
signals)
to swap between
the Main and
(SAP) when it is available.
Digital Audio language
broadcast signals)
(only selectable with digital
Allows you to select your language preference
in case of
multilingual audio track programs
if available with digital
broadcast
signal.
NoteiThe
default language for the digital Channels is the
installed menu language.
Mono/Stereo
Allows you to select, perTV channel, Mono or Stereo sound
when analog stereo broadcasts are available.
AVL
(AutomaticVolume
Leveler)
(only available with
analog broadcast and non-Digital signals)
Automatically
reduces the volume differences between
channels and programs, providing a more constant overall
leveLThis will also reduce the dynamics of sound.
Delta
volume
Allows you to correct
for any permanent
between TV channels or external sources.
Se'ctings
TV
1.
Features
2.
3.
4.
> The Settings
menu appears on the screen.
Select TV and press the cursor
right.
The TV menu is displayed and gives an overview
menus you can select.
Select Features
The Features
Select the menu
2.
of
of the
and press the cursor right.
menu is moved to the left panel.
items with the cursor up/down.
the settings
Closed
1.
differences
The Features menu allows you to control the settings
special features.
Press the MENU button on the remote control.
Adjust
Inf0
volume
with the cursor
left/right.
captions
This displays the transmitted
CC- or CS-text on the screen
according to your chosen CC or CS service in the Setup,
Features preferences
menu, p. 14.This text can either be
permanently
displayed (assuming that the service is available
in the broadcast)
or only when mute is active.
Press the cursor right after having selected Closed
captions.
Select On, Off or On during mute.
Sleeptimer
1.
2.
3.
This sets a time period after which theTV
turns to standby.
Select Sleeptimer.
Press the cursor right.
Select a value with the cursor up/down.The
values from 0 to 180 minutes.
You can always turn
time set.
off your TV earlier
automatically
list will have
or select
another
25
Settings
TV
Ambilight
The ambilight
menu contains the settings for controlling
the
ambient lighting. Using ambient light gives a more relaxed
viewing experience and improves perceived picture quality.
Analysis of the picture content adapts the colors continuously.
But the lights can also be set to any fixed color and many
shades of white.
1.
Press the MENU
2.
The Settings menu appears on the screen.
Select TV and press the cursor
right.
button
on the remote
control.
The TV Menu is displayed and gives an overview
menu items you can select.
Inf0
3,
Select Ambilight
The Ambilight
and press the cursor right.
menu is moved to the left panel.
4,
Select Ambilight
or On.
and press
the cursor
Off will switch off the ambient
other menu items.
of the
right to select
Off
lights and downlight
all
On: the ambient lights will be on. Refine the light
settings in the menus below.
S,
Sett[ngs/TV
Mode
6.
Select Brightness
to adiust the light output of the ambient
lights.
Select Mode and press the cursor right to select Color,
Ambience,
Relaxed, Movie or Action.
Color: this will show constant light according to the
settings in the Ambilight color menu. See below.
The options Ambience,
Relaxed, Movie and Action
will dynamically match brighmess and color to the
screen content.
The mode selection made will effect the speed and/or
saturation and/or intensity which determines the viewing
Inf0
impression.
For ex. in Relaxed mode, the rate of brightness and
color change is smoothly and soft which gives you a
more immersive yet relaxed viewing.
Ambience
is the rate of brightness and color change as
predefined in the factory.
Movie will influence the perception of a movie whereas
Action
Notes;
mode will influence the dynamic impression.
{
- The rate of change is limited, as not to cause
uncomfortable
sensations.
- According to the selection made, some Arnbilight
items wi!! be down!ighted
26
and can not
be se!ected:
menu
Settings/TV
7,
In case Color
o
Select Color in the Ambilight menu and press the cursor
right.
Select Auto Color and press the cursor right again to
select Personal, Warm
white, Cool white or Blue,
o
o
o
color
has been selected in the Mode menu:
Select Palette to select the general color of the light.
Select Saturation
to adjust the colorfulness of the light.
Notes:
Adjusting the Palette and!or saturation
the color mode to Personal.
Separation
Info
Auto
settings will Set
Color
Allows you to define the stereo effect in case Colo_;
Ambience, Relaxed, Movie or Action has been selected in
the Mode menu.
modes:
• Personal: Select any color or
hue to match to your personal
taste, e.g. your interior, the
program content (sports. movie.
etc.), the mood you are in. etc.
• Warm white:The
color is
matched to that of most normal
lightbulbs. Select this setting if
you want theAmNlight
to fit
best with normal living room
lighting.
• Cool white:The
color is
matched to that of normal
daylight (6S00K). Select this
setting if you prefer more cool
lighting,
Note:The 6500 K is the SMPTE
o
Select Off for a mono behavior
o
will behave equally.
Select Minimum,
Medium
Ambilight
which
means that all lamps
or Maximum
to define the
stereo effect spread over the available lamps,
Balance
Allows
you to adjust
the color
and level of light intensity
on
the sides of the picture.
Caution: Infrared interference
To avoid bad infrared remote
control
reception,
place your
peripheral equipment out of sight of the ambient lights of
yourTV. Ambilight does not function well when the room
temperature
is less than 59°F/150C.
recommended
setting for
ambient backlighting of displays.
• Blue:The blue color is preferred
by most consumers to create a
cool. modern and/or mystical
atmosphere. Select this setting
according to your personal
taste
or
mood,
27
Settings
TV
.
ct_
Channels
This menu allows you to control special functions for theTV
channels.
1. Press the MENU button on the remote control.
':
>
2.
The Settings
Select TV
>
menu appears on the screen.
and press the cursor
right.
The TV Menu is displayed and gives an overview
menu items you can select.
3.
Select Channels and press the cursor right.
The Channel menu is moved to the left panel.
4.
Select the menu items with the cursor
Lock
of the
up/down.
after
Info
Note: Lock after is 0nly selectab!e if time and date are
known, See Setup, Clock menu, p. xx.
Setfings/TV
This allows you to prevent the viewing of the selected
channel after a selectable time delay. Locked channels can
still be tuned, but the picture is blanked and the audio is
muted.
Lock after
1.
Press the cursor
right and select
Timer
On
or Off.
When set to On this allows you to set the clock.
When having selected Timer
On, you will be
summoned
to enter your PIN (See Set/Change
PIN,
p.lS). Follow the instructions
on screen.
2.
Select Time and press the cursor right.
> This allows you to set the time after which
3.
4.
Select AM or PM to select the correct
period of the day.
Enter the time with the digit or the cursor buttons.
Channel
lock
This allows
external
Age-based
rating
Content-based
rating
o
All
none
TV
None
none
TV-Y
none
TV-Y7
TV-G
none
TV-PG
(D) Dialog
(FV) FantasyViolence
(L) Language
TV-14
(V) Violence
(D) Dialog
(V) Violence
TV-MA
1.
2.
3.
4.
(L) Language
(S) Sex
(V) Violence
5.
Select
you to completely
loci< a certain
TV channel
or
source,
the channels
ratings
or subchannels
you want
to lock.
lock
Your TV is equipped with aV-chip.This
allows you to control
access to individual programs
based on their movie and TV
ratings.All settings apply to all AV inputs, except HDMI.The
program content advisory data are sent by the broadcaster
or program provide_:
Select TV ratings
lock with the cursor down.
A list appears, showing the age-based TV ratings and a
corresponding
content-based
ratings list.
Press the cursor right to enter the list.
Select an age-based TV rating with the cursor up/down, and
enter, if present, the list with content-based
ratings with the
cursor
right, and select one content-based
rating.
Press OK to activate/de-activate
the selected rating.You are
asked to enter your PIN-code
(see Set/Change
PIN, p. 15). If
the code is correct, the TV ratings loci< menu reappears.
Select another
content-based
rating if you like and press
OK again.
28
the loci< is
set,
Inf0
When All has been selected, all items in the age-based and in
the contents-based
lists are locked.
If, while All is selected, any other
content-based
item, is unselected,
unselected.
item, either an age-based
then All is automatically
or
No rating is the selection for items that either have no rating
information
or have a rating of None. Both will be locked.
When an item on the age-based
list is selected, all items below
that item of the same group are locked as well.
When you select a content-based
rating, all identical contentbased ratings in the age-based
categories
are also selected.
- You can lock/unlock
without
re-entering
any number
your code_
of ratings
on the !ist
-Each ratings item has a box-graphic in front of it to indicate
whether or not programs carrying that rating are currently
locked.
TV ratings
TM-Y
appropriate for children of all ages with themes
elements suitable for children aged 2-6
and
TV-Y1
programs designed for children age 7 and older
TV-Y1-FV
programs include fantasy violence more intense than
other programs in the TV-Y7 category
TV-G
programs suitable for all ages,These programs contain
little or no violence, no strong language and little or no
sexual dialogue or situations
TV-PG
programs contain elements that some parents may find
unsuitable for younger children and which may need
parental guidance.The program may
contain moderate violence_ sexual dialogue and/or
situations and some
strong language
TV-14
programs contain elements that may not be suitable
for children under 14 years of age.
These programs include one or more of the following:
intense violence, intense sexual situations, suggestive
dialogue and strong language.
TV-MA
programs are designed to be viewed by adults and may
be unsuitable for children under the age of 17_These
programs may contain graphic violence, explicit sexua
activity and/or crude or indecent language.
29
Settings/TV
Channels Movie
ratings
lock
Movie
1,
2,
3,
4,
Info
ratings
lock
This function allows you to control access to individual
movies based on their MPAA ratings (Motion Picture
Association
of America).
Select Movie ratings
lock with the cursor
down.
A list appears, showing all valid MPAA content ratings.
Press the cursor right to enter the list.
You are asked to enter your code. (See Set/Change
PIN, p,
15,) If the code is correct, the Movie ratings lock menu
reappears.
Select a movie rating with the cursor up/down,
Press OK to activate/de-activate
the selected rating.
Each rating item has a box-graphic
whether
or not programs
carrying
locked.
in front of it to indicate
that rating are currently
When All has been selected, all items on the movie ratings
list become selected.
(All movies are locked.)
If, while All is selected, any other item is unselected,
then
All is automatically
unselected.
When NR has been selected, no other item is selected.
When any other item has been selected, all ratings below
are selected as well, thus all movies with those ratings will
be locked.
Movie
30
ratings
NR
not rated
G
movies with a mild content,
PG
movies for which parental guidance is recommended
They may contain a few racy or violent scenes or maybe
some bad language
PG-13
movies for which parental guidance may be
recommended if under age 13
R
restricted.The
movies usually contain offensive sex or
bad language and may be unsuitable for children ander
the age of 17. Parental guidance or permission needed.
NC-17
even with parental permission.forbidden
under age 17,
More offensive sex. violence or bad language.
X
movies which generally focus on sex, violence and/or bad
language,Also known as pornography.
suitable for all ages
Preferred
Settings/TV
Channels
channels
After having finished to search for and to store TV channels,
all the installed, non-scrambled,TV
channels are marked as
Preferred channels
preferred by default.
With the -CH/PAGE+
button on the remote control you
can browse through the list of the TV channels. Only those
channels which are in the preferred list will be displayed. In
this menu you can skipTV channels fl'om the preferred list,
or add again.
1.
2.
Info
3.
4.
Select Preferred
channels and press the cursor right.
> A list appears with all TV channel numbers.
Select the channel you want to remove from the preferred
list (or add again);
Press OK to confirm.
Repeat for every channel you want to make preferred
non-preferred.
Region
ratings
lock
or
(if present)
This allows you to control access to individual programs
based on their broadcasted regional rating.
1.
2.
Select Region ratings lock with the cursor down.
> A list appears, showing all valid region ratings.
Press the cursor right to enter the list.
>
>
3.
4.
5.
6.
You are asked to enter your PIN code. See Set/Change
PIN, p. 19).
If the code is correct, the Region ratings loci< menu
reappears.
Select a region rating
Press the OK button
Select another region
Press the cursor left
Clear
region
with the cursor up/down.
to activate the selected rating.
rating if you like and press OK again.
to return to the Channels menu,
ratings
This allows you to clear all the locks you have set in the
Region ratings lock table.
1.
2.
3.
Select Clear region ratings with the cursor down.
Press the cursor right.
You are asked to enter your PIN code. See Set/Change
PIN, p. 19.)
Press the OK button to activate.
4.
press the cursor
left to return
the Channels
menu.
31
The Multimedia browser lets you display pictures or play audio
files stored on a USB device.The Multimedia browser
application
is invoked from the My Contents
_.A button)
right.
menu (press the
by selecting a device and pressing the cursor
-Following file formats can be reproduced:
for pictures:JPEG
for audio: MP3 MP3 Pro
Only FAT/DOS-formatted
memory devices are supported
If your digital camera is not supported
try one of the
following solutions:
• Make sure your camera is switched on and verify if its
configuration
settings are correct (see the manual of your
camera).
- Philips can not be held responsible
supported.
if your USB device is not
Tip: if YOUr USB device does not fit into the USB connector at
the side, use an USB extend cable to connect the USB device
to the USB port Ask your dealer for more informatiom
To
insert
a USB
Note:
device
USB devices are not Supplied with this TV
Insert a USB device to the USB connector
the TV.
When
a USB device is inserted,
menu is displayed automatically.
32
at the left side of
the Multimedia
browser
See further:
To
remove
1.
the USB device
First switch off the My Content menu.To do so, navigate to
the Multimedia browser menu and press the _.A
button to
exit the menu.
Remove the USB device.
Multimedia
Browser
menu
1.
Insert a USB device.
2.
Select the USB device under
Multimedia
with the cursor
up/down.
> The Multimedia browser allows you to browse
stored on the inserted USB device.
content
The 2-panel browser will be shown with the left panel
containing the content types (Music, Pictures).
I USBDevice 1
3.
The right panel will display the content that is available
of the selected content type.
Press the cursor up/down to select a content type.
4.
5.
Press the cursor
Press the cursor
Picture
right to enter the content.
up/down to select a file or a directory.
Note: press _he green Color button to display all the
image files in the current directory as thumbnails when
browsing pictures. Press the green button again to display
the image files in a list.
6.
In case a file is selected, press the OK button
picture file or to play an audio file.
to display a
In case a directory,
album or playlist is selected, press
the cursor right to enter the content or press the OK
button
to start a slide show or a loop playback of the files
7.
present.
Press the cursor left to keep music playing and switch back
to the Multimedia menu.
8.
Press one of the color buttons
on the remote
perform the corresponding function
bottom of the screen.
control to
mentioned
at the
Tip;the
blue Color button canlif necessary, be used tolet
the Color button s reapp ear.
9.
To stop
control.
playing content,
press
the •
button
on the
remote
Notes:
Press
OKt0 ]_lay.
_
- yourTV supports slide shows with background music.
See Annex 2, Philips TV-slideshow format with
background music, p. 57:
- the playback will continue to play even if temporarily
switched to browser screens.The audio will be stopped
when another song starts playing, or when the end has
been reached:
- more technical remarks can be found in Annex
TV-Digital camera and USB issues, p. 59.
Following
4. Phil[ ps
icons may appear:
p!ctires
_
ielf made p,ay,!!_a,bum
33
Function
buttons
at the
bottom
of the
screen
Details
to display a description
or directory
of the selected file
Transitions
to select
if you like to apply a transition
during a slide show
Slide time
to select the duration
a picture will be
displayed in a slide show
Rotate
Repeat
one/all
Shuffle
a picture
to repeat
the playback
to shuffle music
Multimedia
34
to rotate
function
buttons
of a music
collections
on the
file
in a random
remote
control
displaying content;
•
to stop
II
to pause
I1_
to play a single file, start a slide show, playback
folder or other collection.
displaying
way
content;
of a
Ti ps:
- use the inputs that are available on your equipment
performance, as below:
- if necessary, you can adjust the picture position
that provide
the best video
to the centre of the screen with
or audio
the cursor
buttons.
Note:
- yourTV
comes with all types of connectors with the exception
of the DVI connector
your equipment may be equipped with this type. In this case you'll need a DVI to HDMI
a HDMI to DVI cable and separate audio cables, all available at your local dealer.
- be sure to connect
the DVI output
connector
but some of
adapter
or
first, then connect to the HDMI input on your TV.
Warnings:
in case you notice scr0Hing !mages, wrong €ot0rs or no color, no picture, or even
combinations
of these on your screen, verify if the connections are done in the correct way or move
your digital device further away from yourTV and if the resolution and the signal standard of the
connected
equipment
are set in the right way. See the handbook
for your
equipment,
35
Notes:
- Cables are often color-coded to connectors.
- Component
video (YPbPr)
connection
Connect
red to red. white to white ....
is necessary to view video sources, for example digital
broadcastings coming from a settop box, in 1080i, 720p, 480i or 480p;
- The abels for the component video sockets may differ depending on the DVD
_layer or the device
connected.Although
the abbreviations may vary, the letters B and R stand for the blue and red
component signals, respectively, and Y indicates the luminance signal. Refer to the DVD player's or
devices instructions for use for definitions and con qection details:
-This
television
is designed to accept high definition
signal standards 480p, 720p and 1080i as specified
by the Electronic Industries Association standard EIA770.3.
Digital devices from different manufacturers have the possibility
may cause difficulties
for the television
to properly
of differing
Output standards
which
display.
Camera,
Camcorder,
I. Connect
Game
your camera, camcorder
or game as
shown.
2.
Connect to VIDEO (_) and AUDIO
L (_) for
mono equipment. For stereo equipment also
connect AUDIO
R 1_).
S-VHS quality with an S-VHS camcorder is
obtained by connecting the S-VHS cables with
the S-VIDEO
input (_) and AUDIO
®.
Warning:
inputs
do not Connect Cable (3) and (_
at the same time,This
distortion
!
may cause picture
Headphone
I.
Insert the plug into the headphone
as shown.
2.
The headphone impedance must be between 8
and 4000 Ohm.The headphone socket has a
3.5 mm jack.
In the Sound menu select Headphone
volume
to adjust the headphone volume.
Tip:
switch
Press il_
On the remote
off the internal
See Multimedia browser, p. 32.
36
,_,
Control to
loudspeakers
USB
socket
of the TV.
iiCABLE
Digital Surround
r eiver
O_
AUDIO
OUT
AUDIO
S-VIDEO
L + R
Vl
withYPbPr
YPbPr
EO
HDHI
4"
4"
4"
AUDIO L+R
......
AUDIO L R
iiovorecorder
ii
recelver
Cable box
Cable box
, Due to possible digital imag e distortion
when displaying signals from connected
digita I equipment,
automatically the Auto picture setting Soft is selected, !f you selecte d Digital STB in the Source
menu. See Adjust picture men u settings,Auto
picture, p. 22,
Changing this setting
during reviewing
wi II not be stored as Persona
I setting
after switch
off.
37
Warning:
do not place your recorder too close to the screen as some recorders
for signa!s from the display, Keep a minimum distance of 0,5 m from the screen,
may be susceptible
1.
Connect
signal splitter
2.
and/or Cable TV converter
box) (_
Connect
another
RF cable (_) from
CABLE/ANTENNA
75 £_ -Ir- jack.
3.
Better
4.
stereo devices) AV cables (_) to the VIDEO, AUDIO L and R input jacks of AVI, AV2 or AV3
Select the equipment
you have connected
in the Setup menu, Select
your source,
p. 20 and link
it to the AV connector
you have connected
your equipment
to.
the RF Antenna
playback
or Cable TV cable
quality can be obtained
N otes:
- cables
are often
color-coded
-if your
recorder
has an S-VHS video
(eventually
via an optional
two-way
to the RF IN socket of your recorder.
the output OUT of your recorder
to the TV's
if you also connect
to connectors.
Connect
theVideo,
red to red. white
Audio
to white ....
lack:
For improved picture quality, connect an S-video cable with the S-VIDEO
the audio cables to the AUDIO L and R input jacks of AV3.
When using the S-VlD EO connector
do not connect
- in case of mono equipment,
only the left loudspeaker
Use a mono
38
to stereo
adapter
Left and Right (only for
(not supplied)
input of AV3 and connect
any device to the AV3 VIDEO
reproduces
sound.
for sound
reproduction
via all internal
lack:
loudspeakers.
1.
Connect
2.
3.
Connect
the RF output of the AV device to the RF input of the recorder
(_).
Connect
another
RF cable (_) from the output OUT of your recorder
to the TV's input
CABLE/ANTENNA
75 _Z_-Ir- iack.
the RF antenna
better
cable
(_) of the RF IN socket
quality, also connect
other
4.
To obtain
5.
AVI,AV2 orAV3 (VIDEO, AUDIO L and R,) O and O.
Select the equipment
you have connected
in the Setup
menu, Select
them to the AV connectors
you have connected
your equipment
to.
Notes:
- cables are often color-coded
- if your recorder
theVideo,
of your
to connectors.
Audio left and Audio
Connect
AV device.
right cables of both devices
your
source,
to
p. 20 and link
red to red, white to white ....
has an S-VHS video jack:
For improved picture quality, connect an S-video cable with the S-VIDEO
the audio cables to the AUDIO L and R input jacks of AV3.
input of AV3 and connect
When using the S-VIDEO connector do not connect any device to the AV3 VIDEO
- in case of mono equipment, only the left loudspeaker reproduces sound.
Use a mono to stereo adapter
(not supplied)
for sound reproduction
via all internal
jack;
loudspeakers.
39
1.
Use an optional
2.
3.
Connect
one of the cableTV signal splitter outputs
(_ to the cable box's IN iack,
Connect
the other cable TV signal splitter output (_) to the CABLE/ANTENNA
7S £_ -U- plug on
the bottom of theTV.
signal splitter:
4.
Connect
the cable
S.
Connect
VIDEO,
theVideo,
Audio Left and Right (only for stereo sound) recorder
AUDIO L and R input AVI,AV2 orAV3 jacks on theTV.
6.
Select the equipment you have connected in the Setup menu, Select
it to the AV connector you have connected your equipment to.
box's OUT
jack (_) to the recorders
RF IN socket,
AV cables
your
source,
(_) to the
p. 20 and link
Notes:
- cables are often color-coded to connectors.
-if
Connect
red to red. white to white .....
your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable with the S-VIDEO
input of AV3 and connect
the audio cables to the AUDIO L and R input jacks of AV3.
When usingthe S-VIDEO connector do not connect any device to the AV3 VIDEO
- in case Of mono equipment, only the left loudspeaker reproduces sound.
Use a mono to stereo adapter (not supplied) for sound reproduction
via all internal
40
jack:
loudspeakers.
1.
Connect
the satellite
box's IN jack.
antenna
2,
Connect another R,F cable (_) from the output
TV's CABLE/ANTENNA
75 g_ -n- jack.
3.
Connect
theVideo,
AV1,AV2 or AV3.
4.
Select the equipment you have connected in the Setup menu, Select
it to the AV connector you have connected your equipment to.
Audio
cable
or the CableTV
left and right AV cables
cable
OUT
(_) to the satellite
of the satellite
(_) to the VIDEO,
receiver
receiver's
or cable box to the
L and R audio
your
or cable
input jacks of
source,
p. 20 and link
Notes:
- cables are often color-coded to connectors.
Connect
red to red, white to white ....
- if your satellite receiver or cable box has an S-VHS video jack:
For improved picture quality, connect an S-video cable with the S-VIDEO
input of AV3 and connect
the audio cables to the AUDIO L and R input jacks of AV3.
When using the S-VIDEO connector do not connect any device to the AV3 VIDEO
jack;
- in case of mono equipment, only the left loudspeaker reproduces sound.
Use a mono to stereo adapter (not supplied) for sound reproduction
via al internal loudspeakers.
41
1.
Connect
the satellite
box's IN jack.
2.
Connect the AV cables (_) to the satellite
recorder's AV IN jacks.
3.
Connect theVideo, Audio Left and Right (only for stereo sound) recorder
VIDEO, AUDIO L and R input AVI,AV2
orAV3 jacks on the TV.
4.
Connect another RF cable (_ from
CABLE/ANTENNA
75 _ -Ir" jack.
S.
Select the equipment
you have connected
in the Setup menu, Select
it to the AV connector
you have connected
your equipment
to.
Notes:
- cables are often
antenna
color-coded
cable
or the CableTV
receiver's
cable
(_) to the satellite
or cable box's AV OUT
the output out of your recorder
to connectors.
Connect
-if your recorder
has an S-VHS video lack:
For improved picture quality, connect an S-video
red to red. white
jacks and to the
AV cables (_
your
source,
to the
p. 20 and link
to white ....
input
of AV3 and cot _ect
to the AM3 VIDEO
- in case of mono equipment,
only the left loudspeaker
reproduces
sou _d,
Use a mono to stereo adapter (not supplied) for sound reproduction
via all internal
42
or cable
to the TV's input
cable with the S-VIDEO
the audio cables to the AUDIO L and R input jacks of AV3.
When using the S-VIDEO connector
do not connect any device
receiver's
jack;
loudspeakers.
Note:This-rV
tuner
is Capable of disp!aying !080i, 720p and 480p DTV
SetTop
Bo_c Select the output
signals When Connected
of the Set Top Box to either
to a DTV
!080i, 720p or 480p, A DTV
signal
must be available in your area.
Devices
with
Connectors
1.
Connect
ComponentVideo
Output
(YPbPr)
Devices
1.
the three separate component
S-VIDEO
video cables (_) to the device having
component video outputs (YPbPr), such as
Tip:_hen
3.
or other equipment, and to the Y, Pb and
Pr jacks of AVI or AV2 on theTV.
Connect the audio cables to the device's
2.
AUDIO
3.
L and R jacks and to the L and R
audioAVl
or AV2 jacks (_ on theTV.
Select the equipment you have connected in
an S-Video
connector
an S-Video cable to the AV3
input (_).
using the S_VIDEO
Connector
do not connect any device tO th e AV3
VIDEO input.
Set Top Boxes, DVD-players, laser-disc
players, videogame players, satellite receivers
2.
with
Connect
Connect
the audio cables to the device's
AUDIO
L and R jacks and to the L and R
audioAV3 jacks (_) on theTV.
Select the equipment you have connected
the Setup menu, Select
p. 20 and link it to AV3,
your
in
source,
the Setup menu, Select your source,
p. 20 and link it to the AV connector you
have connected to.
43
-HDM!
isth e lead!ng new standard for Digita! vide0 and audio interconnection.To
connector
you can connect H DMI devices such as a Set Top Box or compatible
player with HDMI, or DV!-equipped devices like a computer.
-If the accessory
device has DVI output
only, use a DV! to HDM!
adapter
the HDMI
DyD-R or DVD
cable (not supplied)
to
connect to _he HDM! connector. (Then a!so connect the audio cables to AV1 AUDIO
L and R,)
If necessary, you can adjust the picture position to the center of the screen with the cursor buttons_
Devices
1.
with
Connect
a HDMI
your HDMI
connector:
PC equipped
device with the HDMI
Select the equipment
you have connected
the Setup menu, Select
your source,
in
HDMI connector of your TV.
Connect the audio cables to the PC's
AUDIO
3.
in case of any prob!ems,
see Ampex
4: Issues referring to connected eclu!pment
with a HDM! connector, p. 54.
L and R iacks and to the AUDIO
the Setup
4.
cable to connect to the
L and R jacks of AV1 on theTV.
Select the computer you have connected in
menu, Select
your
source,
p. 20 and link it to HDMI.
Also selectAnalogAudio
In in the same
Source
44
connector:
2.
p. 20 and link it to HDMI.
Note!
a DVI
Use a DVI to HDMI
connector.
2.
with
1.
menu,
o
Connect a Digital Multichannel Surround
receiver to the DIGITAL AUDIO OUT
connector
at the bottom
of the TV.
Note: Due to lega! requirements,
that with certain copy protected
qualities from a peripheral deyice
the HDIVI! input, the Digital audio
muted
Record
aTV
program
You can record aTV program
without affecting your TV.
1.
2.
it is possibl e
PCM audio
connected to
output signa! is
using your recorders
tuner
Select the channel number on your recorder.
Set your recorder to record.
See the handbook for your recorde_:
Note_ When recordinganalog programs, switching channel
numbers on yourTV does not disturb recording !
Before operating
a selection
1.
your connected equipment
in the Setup
Press the AV+ button
menu, Select
repeatedly
your
or select
you have to make
source,
Source
p. 20.
in the
Setup menu (see p. 20) to select AVI, AV2, AV3, HDMI,
Side or TV, according to where you connected
your
devices.
2.
3.
Press the cursor
Press OK.
up/down.
45
Most of the audio and video equipment
from our range of
products
can be operated with the remote
Normal
mode
control of your TV.
Press one of the buttons after you pressed the SELECT button
repeatedly according to the equipment you want to operate
with this remote control. See Use of the remote control, p. 6.
POWER
to switch to standby
- CH + for chapter; channel,
track selection
II
for pause,
•
for record,
_
for rewind (VCR, CD);
search down (DVD,
AMP)
•
for stop,
II_
for play,
_'1_
for fast forward
(VCR,
CD);
search up (DVDIAMP)
0 to 9 digit entry,
tape index (VCR),
selecta DVD chapter,
selecta frequency
(AMP)
cursor up/down
INFO
display information
MENU
to switch
or
--
to select the next or
the previous
to select the previous
or following track
(CD)
the menu on
off
!fno action is being undertaken within
rem0te control returns to TV mode.
- After
control
60 Seconds, the
an action in _he selected system mode, the remote
will remain in this mode for 60 seconds and wil! then
return
_o TV mode or press the Select button
TV mode immediately.
Expert
Direct
selection
connected
When
When
is in TV
to stay in the mode
1. SelectTV
mode
the remote
Expert mode you may directly
select a connected device in the
following
3.
way:
Press the AV+
button:
- followed by digit '1' to select the
device connected to AV1
- followed by digit '2' to select me
device connected to AV2.
- followed by digit '3' to select the
device connected to AV3.
- followed by digit '4' to select the
device connected to HDMI
- followed by digit '0' to select the
device connected to the side.
Make sure your device is turned
on,
46
2.
The
to return
to
mode
of a
device
disc (CD)
cursor left/right
you do not want
the remote
to go back to TV mode.
and
selected, proceed as follows:
with the SELECT button.
Press the SELECT button again simultaneously
with the
OK button for at least 2 seconds.
Select the desired mode with the SELECT button
remote
will not go back to TV mode
from
now on and wil
remain in the mode selected.To
go back to the default setting of
the remote
/TV model repeat what is explained
above, selecting
the TV mode.
Note:
LED
behavior
- If the LED blinks once after pressing the SELECT button
simultaneously with the OK button for at least 2 seconds, the
remote control is in Expert mode and the remote control
remains in the mode selected.
- If the LED blinks 4 times after pressing the SELECT button
with the OK button for at least 2 seconds, the remote
control is in Normal
mode and the remote control returns
toTV mode after 60 seconds.
Symptoms
Items
"Ghost"
double
• This may be caused by obstruction to the antenna due to high rise buildings
or hills.
Using a highly directional antenna may improve the picture.
No
or
images
power
to Check
and Actions
to follow
• Check that the TV's AC power cord is plugged into the mains socket
• Unplug the television, wait for 60 seconds
Then re-insert
plug into the mains socket and turn on the television again
No picture
• Check antenna connections
at the bottom of theTV to see if they are
properly connected
to the TV
• Possible broadcast
station troubleTry
another
channel
• Adjust the contrast
and brightness
settingsTry
another
auto picture setting
• Check the Closed Captions control
SomeTEXT
modes could block the
screen.
• Check
No picture
and
power switched
on
if you selected the correct
AV source.
• Your TV has a protective
mode in case there is too much heat buildup
Check the clearance
around the vents of the device to be certain there
no blocking walls or cabinets which would limit the air flow
are
Picture
position
adjustment
When displaying a High Definition signal from theYPbPr
inputs or HDMI
input, if necessary, you can adjust the picture position to the center of the
screen with the cursor left/right or up/down buttons on the remote
controLThis
may be needed due to slight differences
in output signals from
different brands and types of HD sources boxes
Note: Most High Definition receiver boxes also have picture-positioning controls in
their menu systems. If the TV cursor controls run out of range before the picture is
correctly positioned, the receiver box controls will need to be adjusted
No photo, music
or video play or in
poor quality only
• Check
No sound
• Increase
if the source
complies
with a supported
code
theVOLUME
• Check that
control
the TV is not
muted,
press
the mute button
on the remote
• When no signal is detected,
the TV automatically
switches off the sound
This is proper operation
and does not indicate a malfunction
Good
sound
poor color
no picture
but
or
• Adjust the contrast,
color, tint and brightness
Try another
auto picture setting
Snowish picture
and noise
• Check
Television
• Check whether the batteries are working. Replace if necessary.
• Clean the remote control sensor lens on the monitor.
not
responding
to
remote
control
Control
accessory
of
devices
the antenna
setting
connection
• Operating range between TV and the remote control should not be > 240".
• You can still use the buttons at the right side of your TV.
• Check if the remote control is in the correct mode.
• The infrared signals of the screen may influence the reception sensibility
other peripherals
Solution: replace the batteries of the remote control of other devices.
E.g. keep away a wireless headphone from within a radius of 50".
of
47
Symptoms
Items
The software
not install
will
to Check
and Actions
to follow
Possibly the operating system is wrong. Go to www.philips.com/support
see which operating systems are supported.
to
No stable or not
synchronized
VGA
picture
Check if you have selected the correct VGA mode in your PC.
See Annex 4, Issues referring to connected equipment with a HDMI
connector; p. 54.
Standby
YourTV consumes energy in standby mode. Energy consumption contributes
to air and water pollution.
After improper
shutdown
If yourTV has been shutdown in an improper way (e.g. power drop, power
cord plug out), starting up theTV again wi[[ take a longer time than usual.
If your
problem
is not solved
Turn your TV off and then on again once.
Never
attempt
to repair
a defective
TV
yourself.
Check with your dealer or call aTV technician.
Telephone
number
Philips
Customer
Please, have the Model and Product
ready, before calling.
Care
number
Center:
1-888-PHILIPS
(744-5477)
which you can find at the back of your television
1080i
Provides 1080 lines of resolution. Displays images using interlaced scanning.
1080i is one of the formats used by HDTV (via HDMI,YPbPr, 1394...).
720p
Displays images using progressive
CS
Caption
DCC
Digital Closed
DTV
A new technology for transmitting
and receiving broadcast television
higher resolution and improved sound quality over analog television.
DV
Digital Video
(from a camera)
DVC R
Digital Video
Recorde_:
EAS
Emergency
Method for
digital STV,
emergency
NTSC
Analog signals
PBS
Public Broadcast
48
set
scanning.
Service
Caption
signals. DTV provides
Alert System
use by cable TV systems to signal emergencies to digital terminal devices such as
digital TV receivers and digital VCRs. It allows a cable operator to disseminate
alert information related to state and local-level emergencies and warnings.
System
Introduction
Philips offers software upgrade capability for your TV using
portable memory.After
you have completed a software
upgrade, yourTV will typically perform bette_:
What improvements
are made depends on the upgrade
software you are using as well as the software your TV
contained before the upgrade.
You can execute the software upgrade procedure yourself.
Be aware that the content of this document is addressing
technical or software skilled users.
To
prepare
a USB
device
for
software
upgrade
For the procedure you will require:
- a personal computer with web browsing capability;
- an archive utiJity that supports the ZIP-format
forWindows
or Stuffit for Mac OS);
- a preferably empty USB memory stick.
1.
2.
3.
4.
(e.g.WinZip
New software can be obtained from your dealer or can be
downloaded from the www.philips.com/support
webs[re:
Go to www.philips.com/support
using the web browser on
your PC.
Follow the procedure to find the information and the
software reJated to your TV.
SeJect the [atest software upgrade file and download it to
your PC.
Decompress the ZIP-file and copy the fiJe "autorun.upg"
the root directory of the USB portable memory.
Note: only use Software
_w.philips,com/support
To verify
the
version
upgrades that can be found
web site,
of the TV
to
an d_
software
Before you start the software upgrade procedure, it is
advised to check what the current TV software is.
Settings
Installation
i
Software upgrade
yt
Select Software
Upgrade
Press the cursor right.
The Software Upgrade
Select Current
Software
the description
in the Installation
menu.
menu moves to the left panel.
Info to observe the version and
of the current
software.
Note: It is possible to upload a software Version equa! Or
lower than the current version. !n this case on!y a manual
software upgrade procedure is possible. See p. S0.
Info
49
Automatic
1.
2.
3.
Software UpgradeApplication
4.
Upgradebusy..
software
upgrade
procedure
Switch off yourTV and remove all memory devices.
Insert the USB portable memory that contains the
downloaded software upgrade.
Switch on yourTV with the POWER
(D button on your
remote control
At startup theTV will scan the USB portable memory until
it finds the update content.TheTV
will
automatically
go to
the upgrade mode.After
a few seconds it will display the
status of the upgrade procedure.
Warning:
- you are not allowed to remove the USB portable
memory during the software upgrade procedure:
- in case of a power drop during the upgrade procedure,
don't remove the USB portable memory from the TV.
The TV will continue the upgrade as soon as the power
comes pack:
- ifan error occurs duringthe upgrade you should retry
the procedure or contactyour dealer.
When the software upgrade was successful, remove the USB
portable memory
and restart your TV with the POWER
_) button on your remote
control
Your TV will start up with the new software.
Note; once the upgrade is finished use your PC to
remove the TV software from your USB portable memory.
Manual
1.
Settings
Installation
iii_
_i__,Jii_J
ii_,,
_ i_ii _i__ii i__i i_ _!ii_ii_,iiH
_J_
iii ;_
Software
....
upgrade
2.
,
3.
Info
software
upgrade
procedure
For a manual software upgrade copy the "autorun.upg"
file
in a directory
called "Upgrades"
located in the root of the
USB portable
memory.
Insert the portable
memory
that contains the downloaded
software
upgrade.
Select Software
Upgrade
in the Installation menu. Go to
Local upgrades.
TheTV will list all compatible software available on the USB
portable memory and display the data for each selected
upgrade version.
Select the correct upgrade version and press the red color
button to start the upgrade.
Your TV will restart and will automatically go to the upgrade
mode.After
a few seconds it will display the status of the
upgrade procedure.
Warning:
if yOU try to upgrade to a software
Version
equal or lower than the current version, a confirmation
wil! be asked, Downgrading
to older software
should only
be done in case Of real necessity.
When the software upgrade was successful, remove the USB
portable memory
and restart your TV with the POWER
(_) button on your remote
controLYourTV
will start up
with the new software.
50
Notes:
_the latest Version of this document
(www.philips,€omisupport).
can be found On the Phi!ips Support
website
Use the type number of yourTV (37PF9631D) t0 find this documentation
and other related files.
Phi!ips can't be he!d responsible for any problems that may occur as a result of the content in this
document,
Errors reported to Philips will be adapted and published on the Phi!ips support website
as Soon as possible.
Introduction
This document explains how to make a Philips slideshow file with background audio.
Be aware that the content of this document is addressing technical or software skilled users.
To start the slideshow open the slideshow file in the Multimedia browser of your TV.
1.
Press the _.A
the TV.
2.
3.
4.
Go to where you stored the slideshow file (.alb) on your portable memory.
Select the slideshow file and press the OK button to start the slide show.
To stop a slide show, press the • button.
General
button
on the remote
control
after having inserted a USB device and switched
on
Rules
- The slideshow will use plain ASCII XML syntax to allow the creation and editing of the slideshow
files using simple tools.
- All references to network content must be based on the global address of the content.
- Content on a Portable Memory (PM) doesn't have a global address; as a result content from a PM
can never be referenced from a slideshow not stored on the PM itself.
- To maintain portability, a slideshow stored on a PM should ONLY reference content on the same
PM. Referencing global addresses can result in inconsistencies if the PM is used on a nonnetworked
CE device. The latter is however not forbidden, it is only a recommendation.
- It is preferable that URL's referencing PM content are based on a relative path starting from the
directory where the slideshow is stored. This path includes the device or drive name of the PM.
An absolute path to content will also be supported.
- relative path: pictures\test1 .jpg, tampe_;jpg, ..\new\bird.jpg ....
- absolute path: USB1 :\picturesl\foo
ba_:jpg, C:\fl .jpg, \organization.jpg ....
General
Format
The format and syntax below will be used to create the slideshow
file (simple ascii text)
extension
.alb (.ALB). Examples: slshowl.alb,
summer
holiday 2004.ALB, test.alb ....
The following syntax should be used to create the text file:
<?xml version="1.0"
encoding="lSO-885h9-1"
<philips-slideshow
version="1,0"
>
<title>Title
of the slideshow</title>
<audio>audio
u rl</audio>
<slide-duration>30</slide-du
<slides>
with the
?>
ration>
<slide>slide_l_url</slide>
<slide>slide
2 url</slide>
<slide>slide
3 url</slide>
<slide>slide_4_url</slide>
<slide>slide
S url</slide>
<slide>slide
6 url</slide>
<slide>slideN-1
<slide>slide
</slides>
url</slide>
N url</slide>
</philips-slideshow>
51
Supported
XML-tags
The following
table
gives a description
of the XML syntax.
Tag Name
Use
Description
philips-slideshow
mandatory
Philips slideshow
title
optional
The title of the playlist.
audio
optional
The audio-URL
signature including
following
in the background
during
the version.
this tag will define the music
playing
the slideshow.
A single song or playlist (.m3u & .pls) are the only valid audio
references.
Other reference
will not result in any audio
playback.
repeated
If a single song is referenced
forever.
played in sequence
slide-duration
52
optional
The default
the song will be
If a playlist is referenced
with a repeat
display time
the playlist will be
at the end of the playlist.
(in 0,1 second)
application
isn't obliged to support
can force
the use of one or multiple
of a slide.
this tag. TheTV
predefined
slides
mandatory
Identifies
the slides to show.
slide
optional
Identifies
the URL of the individual slide.
TheTV
application
display times.
Notes:
- the latest version of this document can be found on the Philips support website
(www.philips.comisuppo
rt);
- the software of yourTV is upgradeable.
If you have problems first check if you have the latest
software installed on yourTV. The latest software, together with instructions, can be found on the
Philips support website. Use the type number of yourTV to find this documentation
and other
related files.
- Philips can't be held responsible neither for any errors in the content of this document nor for any
problems as a result of the content in this document.
Errors reported to Philips will be adapted
and published on the Phi ps support website as soon as possible.
Digital
Camera
Issues
If a USB connection
o
o
o
o
between
your digital camera and the TV isn't working, you can try the
solutions below to resolve your problem.
Make sure your digital camera is switched on and verify if the configuration
of your digital camera
is correct (see the manual of your digital camera for more information).
Some digital cameras allow you to switch off the USB interface. Make sure that the USB interface
is switched on before connecting to theTV.
If you have a digital camera with only internal memory (no removable memory) you can try to
copy the content manually to a USB memory device using a personal compute_:
Some digital cameras allow you to switch between PTP (Picture Transfer Protocol) or"PC
Link"
and USB Mass Storage. Make sure that you select USB Mass Storage or"PC
Drive" on your digital
camera.
o If your camera supports different interface settings be sure to try them one by one or contact the
reseller of your camera to find out the correct setting.
USB
Memory
Device
Issues
o Devices connected to the USB port of your TV must be "Mass Storage Class" compliant. If your
device (digital camera. MP3 player, portable
harddisk, ...) is not "Mass Storage Class" compliant
it
will not be detected
by the content browser
of theTV.
o The following subsets of the Mass Storage Class specification
are supported:
The implementation
of theTV is based on the "Universal
Serial Bus Mass Storage Class
Specification
Overview"
(vl.2,June
23, 2003) including all documents
referenced
by the
document.
The document
can be found on the USB standardization
website
(www.usb.org).
Full support
of the USB Mass Storage Class Bulk-OnlyTransport
(blnterfaceProtocol
= 50h).
Full support
of SubClass Code = 05h; SFF-8070i spec.
Full support
of SubClass Code = 06h; SCSI transparent
command set.
o For large USB memory
devices, when you are in the Content
BrowseL it may take a long time
before you can access your files.
o When using a USB portable
harddisk:
Due to the high power consumption
of the harddisk,
it is
advised to use the external power supply of the portable
harddisk to guarantee
proper working
under all conditions.
53
The HDMI
HD
IN connector
Standard DefinitionTV
Enhanced Definition
High Definition
allows the followingTV
(SDTV)
TV (EDTV)
TV (HDTV)
and monitor
display modes:
640x480i
720x480i
640x480p
720x480p
1920x1080i
1280x720p
PC
VGA
SVGA
XGA
If necessary,
buttons.
640x480
800x600
1024x768
you can adjust
the picture
position
to the centre
of the screen
with the cursor
Due to legal requirements,
it is possible that with certain copy protected
PCM audio qualities from
a peripheral
equipment
connected
to the I-IDMI input, the Digital audio output signal is muted.
Your TV supports
HDCP (High-bandwidth
Digital Content
Protection).This
is a system for
protecting
DVD content outputted
via HDMI from being copied. It provides a secure digital link
between
a video source (DVD, PC, etc.) and your TV. Content
is encrypted
at the source
peripheral
equipment
to prevent unauthorised
copies from being made.
Proper working is only guaranteed
with HDMI compliant consumer
products.
Digital peripheral
equipments
from different manufacturers
have the possibility of differing output
standards
which may cause difficulties for the television
to properly display.
In case no signal is detected
from your HDMI equipment,
turn off the HDMI equipment
and then
on again.
To get an optimal viewing, it is advised to switch your DVD player, Blu-Ray of HD settop box to the
highest possible supported
display modes.
54
active control ............................. 23
emergency
adjust picture menu settings _22
adjust sound menu settings __24
adjust features menu settings 25
alternate audio .......................... 24
favorite button ............................. 7
first time installation ................ 10
ambilight ......................................
26
antenna ..........................................
4
audio/video
equipment
buttons ..................................... 46
audio/video
connections
......... 38
autoprogram
..............................
auto picture ................................
auto surround ............................
auto sound .................................
avl (audio
volume
13
22
16
24
alert
signalling ....... ] 8
game .............................................
36
getting started .......................... 3-4
glossary ....................................... 48
HDMI
connector
................ 44, 54
headphone .................................. 36
headphone
volume ................... 24
installation
menu ....................... 12
kensington
security
sound mode ...............................
source ..........................................
24
20
standby button ............................. 6
store channels ............................ 13
sound mode ............................... 24
time zone selection .................. 21
tint ................................................
23
turn the tv on ............................ 10
tv menu settings ........................
tv ratings loci< ............................
21
28
usb connector ............................ 36
usb device ................................... 32
leveller)......25
balance .........................................
24
batteries ........................................ 5
before calling service ............... 47
brightness ................................... 22
loci<.......... 57
language ....................................... 12
lock after ..................................... 28
video equipment
................. 38-40
volume ...........................................
6
vcr ................................................
38
weak channel installation ........ 15
menu button .............................. 11
cable ...............................................
camera .........................................
camcorder
..................................
4
36
36
captions service ......................... 25
captions options ........................ 25
care of the screen ....................... 2
change pin ...................................
channel list ..................................
channel lock ...............................
19
31
28
channel tuning ............................
clear regions ratings .................
clock ........................................ 6,
closed captions ..........................
code setup ..................................
color ............................................
color enhancement
...................
color buttons ...............................
14
31
20
25
19
22
23
6
color temperature
.................... 22
comp. video connectors....38-43
connections
................................ 35
contrast .......................................
22
cursor buttons ............................. 7
movie ratings loci< .................... 30
multimedia
browser ................. 32
mute button ................................. 6
navigate
menus
ok button
pc
21
25
12
digital
digital
digital
DNR
25
23
45
23
audio language ...............
processing .......................
surround
receiver .........
............................................
DVD player ................................. 43
DVD recorder
........................... 38
dynamic
contrast
....................... 23
11-13
......................................
..................................................
6
44
picture format ............................
pin code ......................................
pixel plus .....................................
preferences
menu .....................
preferred
channels ....................
23
19
23
18
31
rear panel overview ................. 37
record a TV program ............... 45
recorder ................................ 38-40
recycling ...................................... 56
region ratings lock .................... 31
remote control ........................ 5-8
reset
daylight saving ............................
delta volume ...............................
demo ............................................
through the
.................................
av settings
........................
19
safety warnings ............................ 2
satellite receiver .................. 41-42
select
select
your connections
.......... 35
connected
devices ........ 45
set pin ..........................................
19
side connectors ......................... 36
sharpness .................................... 22
sleepdmer
................................... 25
slideshow format ....................... 51
software
upgrade
...................... 49
55
_
The packaging of this product is intended
be recycled.Apply
to the local authorities for
correct
Disposal
to
disposal.
of your
Your product
how to dispose of exhausted
to local regulations.
old
product
is designed and manufactured
with
highly quality material and components, which
be recycled and reused.
can
Please inform yourself about the local separate
collection system for electrical and electronic
products. Please act according to your local rules
and do not dispose of your old products with
your normal household waste.
The correct disposal of your old product
will
help prevent potential negative consequences
the environment and human health.
56
The batteries supplied do not contain the heavy
metals mercury and cadmium. Please check on
for
batteries
according
-Your
TVconsumes
energy
instandby
mode. Energy consumption
contributes
to air and
water pollution.Very
low standby power consumption.
- Specifications: see the product leaflet on www. philips, corn/support.
- If you need further assistance, please call the customer support service in your country.
The corresponding
telephone numbers and addresses are given in the supplied Worldwide
booklet.
Kensington
Security
guarantee
Slot
Your TV is equipped with a Kensington Security Slot, to prevent it from getting stolen.
An anti-theft Kensington lock has to be purchased separately.
The Kensington lock is a plastic-coated steel cable with a lock. One end has to be fixed to the
opening of theTV and locked with a special button.The other end is attached to a fixed point.
® Kensington and MicroSaver are registered US trademarks of ACCO World Corporation with issued
registrations and pending applications in other countries throughout the world.All other registered and
unregistered trademarks are the property of their respective owners.
57
WARRANTY
PHILIPS warranty
forth below.
WHO
COVERAGE:
obligation
is limited
to the terms
set
IS COVERED:
Philips warrants
the product to the original purchaser or
the person
receiving the product as a gift against defects in
materials
and workmanship
as based on the date of original
purchase
(*'Warranty
period")
from an Authorized
Dealen
The original sales receipt showing the product
name and
the purchase
date from an authorized
retailer is considered
such proof.
WHAT
new products
if a defect arises
by Philips within theWarranty
At its option, Philips will either (1) repair the product at no
charge, sing new or refurbished
replacement
parts, or (2)
exchange the product
with a product that is new or which
has been manufactured
from new, or serviceable used parts
and is at least functionally
equivalent
or most comparable
to the original product
in Philips current
inventory, or (3)
refund the original purchase price of the product.
Philips warrants
replacement
products
or parts provided
under this warranty
against defects in materials
and
workmanship
fi'om the date of the replacement
or repair
for ninety (90) days or for the remaining portion
of the
original product's
warranty, whichever
provides
longer
coverage for you.When
a product or part is exchanged, any
replacement
item becomes
your property
and the replaced
item becomes
Philips' property.
When a refund is given, your product becomes
Philips'
property
Note:Any
product sold and identified
as refurbished
or renewed
carries a ninety (90) day limited
warranty.
Replacement
product
can only be sent if all
warranty
requirements
are met. Failure to follow
requirements
can result in delay.
•
•
•
•
•
•
•
Limited
Warranty
does not cover:
Shipping charges to return defective product to Philips.
Labor charges for installation
or setup of the product,
adiustment
of customer
controls
on the product, and
installation
or repair of antenna
systems outside of the
product.
Product repair and/or part replacement
because
of
improper
installation, connections
to improper
voltage
supply, abuse, neglect, misuse, accident, unauthorized
repair or other cause not within the control
of Philips.
Damage or claims for products
not being available for
use, or for lost data or lost software.
Damage occurring
to product during shipping.
A product that requires modification
or adaptation
to
enable it to operate
in any country
other than the
country for which it was designed, manufactured,
approved and/or authorized,
or repair of products
damaged by these modifications.
A product used for commercial
or institutional
purposes
(including but not limited to rental purposes).
Product lost in shipment and no signature verification
receipt can be provided.
Failure to operate
per Owner's
Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A.,
PUERTO RICO, OR U.S.VIRGIN ISLANDS ....
Contact Philips Customer Care Center at:
1-888-PHILIPS (1-888-744-5477)
all
WHAT
IS NOT COVERED
- EXCLUSIONSAND
LIHITATIONS
This Limited Warranty applies only to the new products
manufactured by or for Philips that can be identified by the
trademark, trade name, or logo affixed to it.This Limited
Warranty does not apply to any non-Philips hardware
product or any software, even if packaged or sold with the
product. Non-Philips manufacturers, suppliers, or publishers
may provide a separate warranty for their own products
packaged with the bundled product.
Philips is not liable for any damage to or loss of any
programs, data, or other information
stored on any media
contained within the product, or any non-Philips product or
part not covered by this warranty. Recovery or
reinstallation
of programs, data or other information
is not
covered under this Limited Warranty.
Philips, RO. Box 671539,
58
This
•
•
IS COVERED:
The Philips warranty
covers
and a valid claim is received
Period.
This warranty does not apply (a) to damage caused by
accident, abuse, misuse, misapplication, or non-Philips
product, (b) to damage caused by service performed
by
anyone other than Philips or Philips Authorized
Service
Location, (c) to a product or a part that has been modified
without the written permission of Philips, or (d) if any
Philips serial number has been removed or defaced, or (e)
product, accessories or consumables sold "AS IS" without
warranty of any kind by including refurbished Philips
product sold "AS IS" by some retailers.
TO
OBTAIN
ASSISTANCE
IN CANADA
....
1-800-661-6162
(French speaking)
1=888-PHILIPS (1-888-744-5477)
(English of
Spanish speaking)
REPAIROR REPLACEMENTAS PROVIDED UNDERTHIS
WARRANTY ISTHE EXCLUSIVE REMEDY FORTHE
CONSUMER. PHILIPSSHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESSOR IMPLIEDWARRANTY
ON THIS PRODUCT. EXCEPTTOTHE EXTENT
PROHIBITED BYAPPLICABLE LAW,ANY IMPLIED
WARRANTY OF MERCHANT ABILITY OR FITNESSFOR
A PARTICULAR PURPOSEON THIS PRODUCT IS
LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusions or limitation of
incidental or consequential damages, or allow limitations on
how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you.
Harietta,
GA. 30006-0026