Vivitar VIVICAM X026 User manual

ViviCam X026 Digital Camera
User Manual
© 2010 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.
Contents
Introduction ..................................................................................................................................................... 2
What Your Camera Includes ............................................................................................................................ 2
Camera Technical Specifications ..................................................................................................................... 3
Computer System Requirements – Windows................................................................................................... 4
Computer System Requirements – Macintosh ................................................................................................. 4
A Quick Look at your Digital Camera ............................................................................................................... 5
Charging the Lithium Battery ........................................................................................................................... 6
Initial Camera Setup ........................................................................................................................................ 7
Using Your Digital Camera .............................................................................................................................. 9
Changing Camera Mode ................................................................................................................................. 9
Navigating the Menus.................................................................................................................................... 11
Photo Capture Mode ..................................................................................................................................... 11
Photo Playback Mode ................................................................................................................................... 30
Video Capture Mode ..................................................................................................................................... 36
Video Playback Mode .................................................................................................................................... 52
TV Out Function to Connect the Camera to a TV........................................................................................... 55
Installing the Software ................................................................................................................................... 55
Connecting the Camera to the Computer ...................................................................................................... 58
Getting Photos and Videos from Your Camera to Your Computer .................................................................. 59
Get started! ................................................................................................................................................... 60
Transfer media from my camera to my computer manually (Using Windows) ................................................ 61
Transfer media from my camera to my computer manually (Using Macintosh) .............................................. 62
Camera Maintenance .................................................................................................................................... 62
Sakar Warranty Card ..................................................................................................................................... 63
Technical Support .......................................................................................................................................... 64
Troubleshooting............................................................................................................................................. 65
1
Introduction
Thank you for purchasing this camera. Everything you need to take quality digital photos and videos is
included with your camera.
High Definition Resolutions and Water Resistant up to 10 feet /3 meters.
Vivitar makes capturing those special moments as easy as possible.
Note: Your camera needs an SD Memory card (up to 32GB) for normal use.
SD Memory cards are not included and need to be purchased separately.
Please read this manual carefully first in order to get the most out of your digital camera.
What Your Camera Includes

Digital Camera

Vivitar Experience Image Manager software Installation CD

USB cable

Lithium Battery

AC Adapter

Easy Guide

Strap

Warranty Certificate
2
Camera Technical Specifications
Image Sensor
Image Resolution
Video Resolution
File Format
Internal Memory
External Memory
LCD Display
CMOS Sensor
4000x3000(12M),3264x2448(8M); 2592x1944(5M);2048x1536(3M);
640x480(VGA)
640X480 pixels , 320X240 pixels
JPEG/AVI
32MB
SD Card (up to 32GB)
2.4 Inch TFT LCD
Lens
f=6.5mm F3.1
4X Digital Zoom
-3.0EV ~ +3.0EV
Auto, Daylight, Cloudy, Incandescent , Fluorescent
Auto / 100 / 200 / 400
Auto / Scenery / Portrait / Night Scenery / Night Portrait / High Sensitivity
Scene
/ Sport / Beach / Party
Flash
Auto/Force/Red Eye/Off
Self-Timer
2,5or 10 sec delay
Anti-Shake
Yes
Print Photos
Yes
Multi Snapshots
Yes
Interface
USB 2.0
System Requirements Windows XP and above / Mac OSX 10.5 and above
Battery
Lithium (3.7V)
Zoom
Exposure
White Balance
ISO
Working Temperature
0~40 ℃
3
Computer System Requirements – Windows
To be able to download photos and videos to your PC, you will need the following minimum configuration:

Pentium 4 processor or above with Windows XP service pack 2, Windows Vista or Windows 7

512 MB RAM, with 100MB of free disk space

1024 x 768 Recommended screen resolution

16-bit color or higher display adaptor

CD-ROM Drive

QuickTime 6 or higher

Microsoft Internet Explorer 7 or higher

Windows Media Player 10 or higher

Internet connection required
Computer System Requirements – Macintosh
Macintosh with Intel processor running Mac OS X v10.5 or later

256 MB RAM, 100 MB free disk space

Display: 1024 x 768 or higher-resolution monitor

QuickTime 6 or higher

Internet connection required
4
A Quick Look at your Digital Camera
1. Strap Hole
2. Battery Cover
3. Shutter Button
4. Power Button
5. Lens
6. Flash Strobe
7. LCD Screen
8. Busy / Power Indicator LED
9. T / Zoom In Button
10. W / Zoom Out Button
11. Charger Indicator LED
12. Playback Button
13. Up / Display Button
14. Right / Flash Button
15. OK Button
16. Delete Button
17. Down / Mode Button
18. Menu Button
19. Left / Self-Timer Button
20. Tripod Socket
21. Microphone
5
Charging the Lithium Battery
Only use the Lithium Battery that is included in the packaging.
To charge the Lithium Battery insert the battery into the camera in the direction as shown.
Insert the battery with the positive (+) and negative (-) poles matching the directions indicated inside the
battery compartment.
1)
Make sure the camera is powered off.
2)
Plug in the AC Adapter included in the package and connect the other end to the USB slot of the camera.
3)
Alternatively, connect the USB cable to the USB slot on the camera and to the USB port of your
computer.
4)
The Charge LED on the back of the camera lights up.
5)
When fully charged after a few hours the Charge LED will turn off.
6
Initial Camera Setup
When powering the camera ON for the first time the camera will take you through the initial camera setup.
Powering the Camera ON
1)
Make sure the battery is fully charged before the first use.
2)
Make sure an SD card has been inserted into your camera.
3)
Make sure the battery cover is tightly closed and locked into place.
4)
Press the POWER
button to turn on the camera
7
Setting the Camera Language
1)
You will first be prompted to select a language for the camera. The Language selection menu will appear.
Select the language of your choice and press the OK button to confirm the selection.
2)
After selecting a language, you will be asked if you would like to continue with the initial camera setup. A
message will appear: “Continue with Camera Setup?” Select “Yes” to continue or “No” to exit the setup.
Note: If you select “No” and decide to leave the camera setup, the camera will be set to its default settings.
These settings can be adjusted at any time manually through the menus in the camera.
Setting the Date and Time
The next step in the initial camera setup is to set the date and time on the camera.
Set the Date and Time as Desired and press the OK button to confirm the selection and move to the next part
of the camera setup.
8
Using Your Digital Camera
Make sure the batteriy is fully charged before the first use.
Powering the camera ON
Press the Power button
to turn your camera ON. The camera will be in Photo Capture mode to start.
Powering the camera OFF
While the camera is on, you can press the Power button
again at any point to turn your camera OFF.
You will see a “Goodbye” splash screen and then the camera will power off completely.
Note: your digital camera also has an Auto Power Off feature that will automatically turn off your camera after
a specific period of time that your camera is left idle. The Auto Power Off settings can be set from the Auto
Power Off settings menu.
Changing Camera Mode
Your camera has three main modes:
9
1)
Photo Capture Mode - Use this mode to capture photos with your camera.
2)
Video Capture Mode - Use this mode to capture videos with your camera.
3)
Playback Mode - Use this mode to view the photos and videos you have already taken with your camera.
When the camera is first powered ON, the Photo Capture Mode will be active. The icons that appear on the
LCD screen are the best default settings so that you can begin to capture and enjoy clear quality photos.
To change the active camera mode, make sure the camera is powered ON. Press the Down directional MODE
button to select the mode.
Press the Playback Button to open the Palyback mode.
When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display
When in Video Capture Mode, this icon will display on the top-left corner of the LCD display
When in Playback Mode, this icon will display on the top-left corner of the LCD display
10
Navigating the Menus
Each camera mode has a set of menus specific to that mode. Press the MENU button to open the menus for
the current mode.
1)
Press the LEFT or RIGHT direction control buttons to scroll between the various menus for the current
mode.
2)
Press the UP or DOWN direction control buttons to highlight the desired menu selection.
3)
Press the OK button to confirm and select the highlighted menu option.
4)
If the selection can be remembered by the camera, a
selection icon will appear to the right of the
selected menu option. Changes made to these options will remain as is until you decide to change them
again at a later time.
5)
Some menu options are single-use functions that are not remembered by the camera and do not display
this icon when selected.
6)
At any time you can press the MENU button to exit the menus and return to the previous screen.
Photo Capture Mode
The first mode to appear when the camera is first powered on is the Photo Capture mode.
Taking a Picture
11
1)
While in Photo Capture mode, use the LCD display on the back of the camera to direct the camera at the
scene you would like to capture.
2)
Click the T/Zoom In and W/Zoom Out buttons to zoom in/out if desired.
3)
Click the Shutter button on the top of the camera to take the picture.
4)
The picture will automatically be saved to the memory or SD card.
Photo Capture Mode Quick Function Buttons
Your digital camera has a four-directional pad that functions as Quick Function buttons:
Left
Self-Timer
Up
Display
Right
Flash
Down
Mode
Hide/Show the LCD Icons
The display of the icons on the LCD screen can be hidden or visible as desired.
1)
Press the DISP button to hide the display of the icons on the screen.
2)
Press the DISP button again for the screen to go blank.
3)
Press the DISP button again to redisplay the icons on the screen.
12
Flash Options
There are several Flash options available on your camera. The options appear on the Photo Capture Mode
LCD screen in the sequence.
To change the Flash mode, press the Right Quick Function button until you arrive at your desired settings.
A
Forced Off (Default)
Red Eye
Auto Flash
Forced On
Self-Timer
Include yourself in the picture. Place the camera on a tripod or a flat and strudy surface.
1)
Press the Right /Self-Timer button select the time delay.
2)
Press the Shutter button and join the picture.
3)
The camera will begin to emit beeps for every second of the 2, 5, or 10 seconds delay you selected.
4)
The photo will be taken automatically.
13
Photo Capture Mode Menus
The following are the menus that appear in your camera‟s Photo Capture Mode:
14
Scene Menu
The Scene Menu allows you to choose scene settings that allow your camera to adapt properly to your current
environment.
15
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
An icon reflecting your selection will display on the LCD screen.
7)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
Image Resolution Menu
The Image Resolution menu allows you to choose the desired size of the images taken by your camera. Keep
in mind that images with a higher resolution will also take up more of your camera‟s memory.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
selected option icon will appear on the selected item.
16
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
An icon reflecting your selection will display on the LCD screen.
7)
Remember that this setting will be remembered by your camera until you manually change the setting or
restore the camera‟s default factory settings.
Image Quality Menu
The Image Quality menu allows you to select the desired quality level of the images taken by your camera.
Keep in mind that images with a higher image quality level will also take up more memory on your camera.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
An icon reflecting your selection will display on the LCD screen.
7)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
17
Self-Timer Menu
The Self-Timer menu allows you to set a delay between the time that the camera‟s shutter button is pressed
and the actual capture of the picture.
This is an optimal feature if you don‟t just want to take the picture but would also would like to be in the picture
yourself. Just set the desired self-timer delay, press the shutter button on your camera and position yourself in
front of the camera as desired.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
An icon reflecting your selection will display on the LCD screen.
7)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
18
Anti-Shake Menu
The Anti-Shake feature reduces image corruption that can be caused by movement of the camera while
capturing the image.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the MENU button to exit the menu and return to your previous mode.
5)
An icon reflecting your selection will display on the LCD screen.
6)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item
restore the camera‟s default factory settings.
White Balance Menu
The White Balance feature allows your camera to adjust the coloring of the captured images depending on the
type of light source in the current environment.
Properly adjusting the White Balance setting to match your current environment will allow the camera to
properly balance the colors in the images that are taken with your camera.
19
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
An icon reflecting your selection will display on the LCD screen
7)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
Color Effect Menu
You can choose to add a color effect to the images taken with your camera.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
selected option icon will appear on the selected item.
20
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
Remember that this setting will be remembered by your camera until you manually change the setting or
restore the camera‟s default factory settings.
Multi-Snapshots Menu
When enabled, the Multi-Snapshots feature allows you to take five rapid snapshots in a row with a single click
of the shutter button.
This feature can be effective when trying to capture a particular moment in a sporting event or other scenes
with quick movements.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
An icon reflecting your selection will display on the LCD screen
7)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
21
Image Sharpness Menu
You can set the level of sharpness in the images taken with your camera. The sharpness level dictates if the
edges of objects in the image are more or less distinct.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
An icon reflecting your selection will display on the LCD screen
7)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
Light Exposure Menu
The Light Exposure setting helps you control the amount of light that enters your camera‟s lens. This setting
should be adjusted when the environment is lighter or darker than normal.
22
When the environment has more light than is needed, reduce the exposure setting (by using the negative count) to reduce the amount of light allowed into the lens by your camera.
If the environment has less light (darker) than is needed, increase the exposure setting (by using the positive +
count) to increase the amount of light allowed into the lens by your camera.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
An icon reflecting your selection will display on the LCD screen
7)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
23
Metering Menu
The Metering setting will affect how your camera focuses when capturing an image. Depending on your
selection, the camera will be more sensitive to focusing on particular areas in the display and adjust the image
color and lighting accordingly.
Center – Averages the light metered from the entire frame, but giving greater weight to the subjectin the center
Multi – Used in standard conditions the camera divides and adjusts the settings of the image into several
zones for light metering such as complex light conditions, position of subject, brightness, background, direct
light and scenes
Spot – Meters the area within the spot point frame at the center of the LCD to set the exposure on the subject
in the center of the monitor.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the MENU button to exit the menu and return to your previous mode.
5)
An icon reflecting your selection will display on the LCD screen
6)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item
restore the camera‟s default factory settings.
24
Language Menu
You can select your camera‟s language setting by selecting the desired language from the Language menu.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
Date/Time Menu
When you capture an image with your camera, the image will include a time stamp with the date and time that
the image was taken.
The Date/Time menu allows you to set your camera‟s date and time as desired. You can also disable the
timestamp for future images that will be taken with your camera.
25
On – The timestamp will appear on photos taken
Off – The date stamp will not appear on photos taken
To Enable/Disable the Timestamp:
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the MENU button to exit the menu and return to your previous mode.
5)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon now appears to the right of the option name
restore the camera‟s default factory settings.
To Set the Date and Time:
1)
Highlight the “Date Setup” menu option.
2)
Press the OK button to select the desired option.
3)
The Date Setup submenu will open
4)
Scroll through the window with the right and left navigation buttons. For each field in the menu, use the up
and down navigation buttons to set the time and date.
Press the MENU button to exit the menu and return to your previous screen.
26
Silent Mode Menu
You have the option of activating the camera‟s silent mode to disable all of the sound effects that the camera
emits when performing camera functions.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
Auto Power Off Menu
You can use the Auto Power Off feature in order to conserve you camera‟s battery life. The designated time
represents when your camera will automatically power off.
When the camera sits idle for the designated period of time, the camera will shut off completely and will need
to be powered on again with the power button before the next use.
27
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
Frequency Menu
The options in the Frequency menu represent the frequency of the electrical current in flourescent lighting
sources in your locale. If your camera is set to a frequency that does not match your country‟s electric current,
you may see waves on the images taken by your camera.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
selected option icon will appear on the selected item
28
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
Remember that this setting will be remembered by your camera until you manually change the setting or
restore the camera‟s default factory settings.
Format Memory Card Menu
You can use the Format Memory Card menu to delete all of the content that is currently on your camera‟s
memory card.
Keep in mind that formatting the memory card will permanently delete all of the content on your
camera’s memory card.
This option will delete all of the content at one time. If you would like to delete individual images, use the delete
menu in the camera‟s Playback mode.
1)
Press the UP or DOWN direction control buttons to highlight the menu options. While scrolling down the
selected option will be highlighted.
2)
If you would like to proceed with the format, select “Yes” and press the OK button.
3)
You will be asked to confirm your wish to format your memory card.
4)
Select “No” to exit without formatting.
5)
Select “Yes” and press the OK button to begin the format.
6)
The memory card will be completely formatted
29
7)
A message will appear confirming that your memory card has been formatted clean.
Factory Settings Menu
Use this menu to view the Firmware version on your camera or to reset your camera settings to the factory
default settings.
1)
The “Default Setting” is selected.
2)
Press the OK button to reset the camera to the factory default settings.
3)
You will be asked to confirm your wish to restore all of the factory settings.
4)
Press the UP or DOWN buttons to select “Yes” and press the OK button to begin the format.
5)
The camera will be reset.
6)
A message will appear indicating that the settings have been reset successfully.
Photo Playback Mode
When you first turn on the camera, the camera will be in Photo Capture mode by default. Press the Playback
button to open the Playback Mode. The playback mode will allow you to review and edit photos and videos
that you‟ve already taken with you camera.
30
Viewing Photos on Your Camera
Once in the Playback mode, press the LEFT or RIGHT direction buttons to scroll through the images on your
camera‟s memory card. Photos appear with a JPG icon on the top left of the LCD screen .
Quick Delete
Select the image that you wish to delete and press the Delete button.
1)
A “Delete Current” message will appear on the LCD with „Yes‟ and „No‟ options.
2)
Press the LEFT or RIGHT button so to select you choice.
3)
Press the OK button.
Zooming In/Out on a Photo
Press the T / Zoom In button to zoom in on a photo on your camera. Use the direction buttons to navigate
around the photo.
Press the W / Zoom Out button to zoom out on a photo on your camera.
Thumbnail View
Easily navigate and select the image you wish to view by using the Thumbnail View.
The images on your camera will be displayed in a 3 X 3 matrix where you can use the direction buttons to
scroll and select images normally from the thumbnails.
31
1)
Press the W/Zoom Out button
2)
All the images on your camera will appear in the Thumbnail View.
3)
Use the direction buttons to scroll and select the image you wish to view.
4)
Press the SET button to enlarge the image full size
Photo Playback Mode Menus
The following are the menus that appear in your camera‟s Photo Playback Mode. Press the MENU button for
the menus to appear.
32
Rotate Menu
Use this menu to rotate the pictures that you‟ve taken with your camera.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
The selected picture will now appear rotated in the Playback mode.
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
Protect/Lock Menu
Pictures and Videos taken with your camera can be protected or “locked” to prevent any deletion or alteration
being made to the files.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
Press the LEFT or RIGHT button to select the next menu item.
4)
Press the MENU button to exit the menu and return to your previous mode.
33
5)
Any image that is locked will display a lock symbol on the LCD screen when viewing that image in the
playback mode. Photos that are not locked will not display the lock symbol.
6)
Remember that you cannot delete or edit photos while they are locked.
Delete Menu
While in the playback mode, you can delete pictures from your camera through the delete menu.
1)
Use the LEFT or RIGHT buttons to select the image you would like to delete.
2)
Press the OK button to open the menus.
3)
Scroll to the Delete Menu.
4)
Press the UP or DOWN direction control buttons to scroll through the menu options.
5)
To delete this one photo, select “Delete This Photo”
6)
To delete all the images (including all unlocked photos and videos) on your camera‟s memory card, select
“Delete All Images”.
7)
Press the OK button to select the desired option.
8)
You will be asked to confirm your selection.
9)
The photos will be deleted as desired.
Print Photos Menu
34
You can use the Print Photos menu to print the photos that are on your camera directly to a Pictbridge
compatible printer.
1)
Scroll through your pictures and find the one you would like to print.
2)
Open the Print Photos menu.
3)
Press the UP or DOWN direction control buttons to scroll through the menu options.
4)
Press the OK button when highlighting the “Print This Photo” option to print the selected photo.
5)
You will be asked to connect the camera to the Pictbridge printer.
6)
Connect the USB cable provided in the package form the camera to the Pictbridge port of the printer.
7)
Once connected, follow the instructions on the printer to proceed with the printing process.
8)
Select the “Cancel” option to exit the menu and return to the previous mode.
Slide Show Menu
You can view a slideshow of all the pictures taken with your camera while in the playback mode.
The Slideshow menu allows you to set the interval length of time that each picture will display during the
slideshow.
Set the Interval:
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
35
3)
A
selected option icon will appear on the selected item.
4)
The Slide Show will begin to play.
5)
Press the MENU button to exit the Slide Show and return to your previous mode.
Video Capture Mode
The Video Capture Mode allows you to capture videos with your digital camera. When the camera is first
powered ON, the camera will be in Photo Capture Mode by default. Press the DOWN Mode button to open the
Video Capture Mode.
Taking a Video
1)
While in Video Capture Mode use the LCD display on the back of the camera to direct the camera at the
scene you would like to capture.
2)
Click the T/Zoom In and W/Zoom Out buttons to better set the camera display if desired.
3)
Press the Shutter button on the top of the camera to start the video capture.
4)
You will see a red icon at the top of the LCD indicating that the record is in progress.
5)
To stop the video record, press the Shutter button again.
6)
The video will automatically be saved to the camera`s memory or SD card memory card.
36
Video Capture Mode Menus
The following are the menus that appear in your camera‟s Video Capture Mode:
37
Scene Menu
The Scene Menu allows you to choose scene settings that allow your camera to adapt properly to your current
environment.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
An icon reflecting your selection will display on the LCD screen.
7)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
Image Resolution Menu
The Image Resolution menu allows you to choose the desired size of the images taken by your camera. Keep
in mind that images with a higher resolution will also take up more of your camera‟s memory.
38
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
An icon reflecting your selection will display on the LCD screen.
7)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
Image Quality Menu
The Image Quality menu allows you to select the desired quality level of the images taken by your camera.
Keep in mind that images with a higher image quality level will also take up more memory on your camera.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
selected option icon will appear on the selected item.
39
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
An icon reflecting your selection will display on the LCD screen.
7)
Remember that this setting will be remembered by your camera until you manually change the setting or
restore the camera‟s default factory settings.
Anti-Shake Menu
The Anti-Shake feature reduces image corruption that can be caused by movement of the camera while
capturing the image.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the MENU button to exit the menu and return to your previous mode.
5)
An icon reflecting your selection will display on the LCD screen.
6)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item
restore the camera‟s default factory settings.
40
White Balance Menu
The White Balance feature allows your camera to adjust the coloring of the captured images depending on the
type of light source in the current environment.
Properly adjusting the White Balance setting to match your current environment will allow the camera to
properly balance the colors in the images that are taken with your camera.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
An icon reflecting your selection will display on the LCD screen
7)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
Color Effect Menu
You can choose to add a color effect to the images taken with your camera.
41
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
Multi-Snapshots Menu
When enabled, the Multi-Snapshots feature allows you to take five rapid snapshots in a row with a single click
of the shutter button.
This feature can be effective when trying to capture a particular moment in a sporting event or other scenes
with quick movements.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
42
3)
A
selected option icon will appear on the selected item.
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
An icon reflecting your selection will display on the LCD screen
7)
Remember that this setting will be remembered by your camera until you manually change the setting or
restore the camera‟s default factory settings.
Image Sharpness Menu
You can set the level of sharpness in the images taken with your camera. The sharpness level dictates if the
edges of objects in the image are more or less distinct.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
An icon reflecting your selection will display on the LCD screen
selected option icon will appear on the selected item.
43
7)
Remember that this setting will be remembered by your camera until you manually change the setting or
restore the camera‟s default factory settings.
Light Exposure Menu
The Light Exposure setting helps you control the amount of light that enters your camera‟s lens. This setting
should be adjusted when the environment is lighter or darker than normal.
When the environment has more light than is needed, reduce the exposure setting (by using the negative count) to reduce the amount of light allowed into the lens by your camera.
If the environment has less light (darker) than is needed, increase the exposure setting (by using the positive +
count) to increase the amount of light allowed into the lens by your camera.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
selected option icon will appear on the selected item.
44
6)
An icon reflecting your selection will display on the LCD screen
7)
Remember that this setting will be remembered by your camera until you manually change the setting or
restore the camera‟s default factory settings.
Metering Menu
The Metering setting will affect how your camera focuses when capturing an image. Depending on your
selection, the camera will be more sensitive to focusing on particular areas in the display and adjust the image
color and lighting accordingly.
Center – Averages the light metered from the entire frame, but giving greater weight to the subjectin the center
Multi – Used in standard conditions the camera divides and adjusts the settings of the image into several
zones for light metering such as complex light conditions, position of subject, brightness, background, direct
light and scenes
Spot – Meters the area within the spot point frame at the center of the LCD to set the exposure on the subject
in the center of the monitor.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
selected option icon will appear on the selected item
45
4)
Press the MENU button to exit the menu and return to your previous mode.
5)
An icon reflecting your selection will display on the LCD screen
6)
Remember that this setting will be remembered by your camera until you manually change the setting or
restore the camera‟s default factory settings.
Language Menu
You can select your camera‟s language setting by selecting the desired language from the Language menu.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
46
Date/Time Menu
When you capture an image with your camera, the image will include a time stamp with the date and time that
the image was taken.
The Date/Time menu allows you to set your camera‟s date and time as desired. You can also disable the
timestamp for future images that will be taken with your camera.
On – The timestamp will appear on photos taken
Off – The date stamp will not appear on photos taken
To Enable/Disable the Timestamp:
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the MENU button to exit the menu and return to your previous mode.
5)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon now appears to the right of the option name
restore the camera‟s default factory settings.
To Set the Date and Time:
47
1)
Highlight the “Date Setup” menu option.
2)
Press the OK button to select the desired option.
3)
The Date Setup submenu will open
4)
Scroll through the window with the right and left navigation buttons. For each field in the menu, use the up
and down navigation buttons to set the time and date.
Press the MENU button to exit the menu and return to your previous screen.
Audio Menu
The Audio menu allows you to control the camera‟s ability to record audio in the video clips recorded with your
camera in addition to the video record.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the MENU button to exit the menu and return to your previous mode.
5)
An icon reflecting your selection will display on the LCD screen
selected option icon will appear on the selected item
48
6)
Remember that this setting will be remembered by your camera until you manually change the setting or
restore the camera‟s default factory settings.
Auto Power Off Menu
You can use the Auto Power Off feature in order to conserve you camera‟s battery life. The designated time
represents when your camera will automatically power off.
When the camera sits idle for the designated period of time, the camera will shut off completely and will need
to be powered on again with the power button before the next use.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item.
restore the camera‟s default factory settings.
Frequency Menu
49
The options in the Frequency menu represent the frequency of the electrical current in flourescent lighting
sources in your locale. If your camera is set to a frequency that does not match your country‟s electric current,
you may see waves on the images taken by your camera.
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
A
4)
Press the LEFT or RIGHT button to select the next menu item.
5)
Press the MENU button to exit the menu and return to your previous mode.
6)
Remember that this setting will be remembered by your camera until you manually change the setting or
selected option icon will appear on the selected item
restore the camera‟s default factory settings.
Format Memory Card Menu
You can use the Format Memory Card menu to delete all of the content that is currently on your camera‟s
memory card.
Keep in mind that formatting the memory card will permanently delete all of the content on your
camera’s memory card.
50
This option will delete all of the content at one time. If you would like to delete individual images, use the delete
menu in the camera‟s Playback mode.
1)
Press the UP or DOWN direction control buttons to highlight the menu options. While scrolling down the
selected option will be highlighted.
2)
If you would like to proceed with the format, select “Yes” and press the OK button.
3)
You will be asked to confirm your wish to format your memory card.
4)
Select “No” to exit without formatting.
5)
Select “Yes” and press the OK button to begin the format.
6)
The memory card will be completely formatted
7)
A message will appear confirming that your memory card has been formatted clean.
Factory Settings Menu
Use this menu to view the Firmware version on your camera or to reset your camera settings to the factory
default settings.
1)
The “Default Setting” is selected.
2)
Press the OK button to reset the camera to the factory default settings.
3)
You will be asked to confirm your wish to restore all of the factory settings.
51
4)
Press the UP or DOWN buttons to select “Yes” and press the OK button to begin the format.
5)
The camera will be reset.
6)
A message will appear indicating that the settings have been reset successfully.
Video Playback Mode
When you first turn on the camera, the camera will be in Photo Capture mode by default. Press the Playback
button to open the Playback Mode. The playback mode will allow you to review and edit photos and videos
that you‟ve already taken with you camera.
Playing Videos on Your Camera
Once in Playback mode, press the LEFT or RIGHT direction buttons to scroll through the images on your
camera‟s or memory card. Each image will display on the LCD screen.
When you find a video that you would like to play, press the Shutter button to start playing the video.
Press the Shutter button again to pause the video and continue playing and pausing as needed.
While the Video is playing all the icons on the top section of the LCD disappear.
To fully stop the video and restore the icons to the LCD, press the OK button.
52
Quick Delete
Select the image that you wish to delete and press the Delete button.
1)
A “Delete Current” message will appear on the LCD with „Yes‟ and „No‟ options.
2)
Press the LEFT or RIGHT button so to select you choice.
3)
Press the OK button.
Video Playback Mode Menus
The following are the menus that appear in your camera‟s Video Playback Mode:
Protect/Lock Menu
Pictures and Videos taken with your camera can be protected or “locked” to prevent any deletion or alteration
being made to the files.
53
1)
Press the UP or DOWN direction control buttons to scroll through the menu options.
2)
Press the OK button to select the desired option.
3)
Press the MENU button to exit the menu and return to your previous mode.
4)
Any image that is locked will display a lock symbol on the LCD screen when viewing that image in the
playback mode. Videos that are not locked will not display the lock symbol.
5)
Remember that you cannot delete locked videos.
Delete Menu
While in the playback mode, you can delete videos from your camera through the delete menu.
1)
View the image you would like to delete.
2)
Press the OK button to open the menus.
3)
Scroll to the Delete Menu.
4)
Press the UP or DOWN direction control buttons to scroll through the menu options.
5)
To delete this one video, select “Delete This Video”.
6)
To delete all the images (including all unlocked photos and videos) on your camera‟s memory card, select
“Delete All Images”.
7)
Press the OK button to select the desired option.
8)
You will be asked to confirm your selection.
9)
The videos will be deleted as desired.
54
TV Out Function to Connect the Camera to a TV
The camera has an AV port to use your larger TV screen in place of the camera`s LCD screen. On
plugging the TV-out cable (supplied) to the cameras AV out jack, the LCD screen will turns blank. Use the
camera as you would to capture and playback photos and videos. The images will appear on the TV
instead of on the LCD screen.
Note: The only limitation of using the TV screen is that the camera is now not portable.
1)
Connect the camera to a TV via the TV-out cable (supplied).
2)
Turn on the TV and the camera, and then set the TV to “AV” mode.
3)
When the camera is set to record mode, you can preview the subjects you want to record on the
TV screen.
4)
When the camera is set to Playback mode, you can review on the TV all the photos and videos
stored in the camera or on the SD memory card.
Installing the Software
You must be connected to the internet to install and run the Vivitar Experience Image Manager
software.
55
1)
Insert the installation CD into your CD-ROM drive. The installation screen should automatically open.
2)
On PC: The Vivitar Experience Image Manager Installer window appears. If the window does not appear,
open the application‟s CD/DVD drive and click on “Setup.exe” to launch the installer.
3)
On Macintosh: Click the icon that appears on the desktop to install the Vivitar Experience Image
Manager.
4)
If you do not have internet access at the time of inserting the CD-ROM, connect to the internet and then
click the “Install Vivitar Experience Image Manager” button to begin the installation.
56
Note: If you do not have internet access, you can still download media from the camera. Click the “How to
transfer photos and videos from my camera to my computer” button for instructions.
5)
If you have internet access, the “Choose your language” window opens, choose your language and click
“Next” to open the next window.
6)
Select your camera model from the list and click “Next” to open the next window.
7)
Click “Next” to confirm your camera model selection and to install the application.
8)
Please wait while the application is being installed on your computer.
57
9)
Please review the license terms.
On PC and Macintosh: Click the “I accept the terms of this license agreement” and then click “Next” to
continue.
10) On PC only: Let the “Vivitar Experience Image Manager” installer create the folder to where the program
will be installed, and then click “Install”.
11) Please wait while the application continues the installation process on your computer.
12) On PC: Click the “Close” button when the installation is complete.
The application will automatically open.
13) On Macintosh: Click the “Quit” button when the installation is complete.
Click the “Launch Vivitar Experience Image Manager” to open the application
14) If you close the application you can run the Vivitar Experience Image Manager from the Programs (PC) or
Application (Mac) menu on your computer.
Connecting the Camera to the Computer
1)
Use the USB cable that came with your camera to connect your camera to your computer.
2)
Power
the camera on.
58
3)
The first time you connect the device to the computer you will have to wait a few seconds until the
computer recognizes the device.
Getting Photos and Videos from Your Camera to Your Computer
An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so will cancel the transfer
of any files on their way to your computer.
1)
Select the “Get Images” button from the Main menu.
59
2)
The “Get media from device” window opens.
3)
You can select to download photos, videos or both.
4)
Select your camera (removable disk) from the device window. If your camera is the only USB device
connected then it will be selected automatically.
5)
Select a location on the computer where to place the new photo and video files.
6)
Add the new photo and video files to albums if desired.
7)
Select to remove the media files from the selected device (removable disk) after the import.
8)
Click the “Get Media” button to transfer the photos and videos from your camera to your computer.
9)
A media download progress bar appears on the bottom left showing the number of media files
downloading to your computer. A message appears when the download is complete.
10) The photo and video files that you selected are now downloaded to your computer to the selected folder
and albums ready for your use.
Get started!
Using the Vivitar Experience Image Manager, you can:

Upload and manage photos and videos to and from the most popular photo sharing and social
networking sites - Facebook, Flickr, MySpace, Picasa, Photobucket and YouTube

Seamlessly transfer photos and videos from one social network to another
60

Organize your images by creating offline and online albums

Edit images using automatic and manual tools

Use automatic “Geotagging” with built in Google Maps
For more details on how to use the Vivitar Experience Image Manager open the Help file or click the
“Take the Tour” button on the application`s Home page.
Transfer media from my camera to my computer manually (Using
Windows)
1)
Use the USB cable that came with your camera to connect your camera to your computer.
2)
MSDC appears on the LCD.
3)
A window appears with a list of options, select “Open folder to view files” and click OK.
4)
Open the DCIM folder and the folder inside to view the media files.
5)
Select the media and copy the files from this folder into your computer. Optionally, select the files and
choose Copy from the Edit menu. Then select a folder and choose Paste from the Edit menu.
6)
We recommend that you copy the images into the Pictures/My Pictures folder and the videos into the
Videos/My Videos folder.
7)
Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way to
your computer.
61
Transfer media from my camera to my computer manually (Using
Macintosh)
1)
Use the USB cable that came with your camera to connect your camera to your computer.
2)
MSDC appear on the LCD.
3)
The camera‟s device icon appears on the desktop.
4)
Click on the device icon and open the DCIM folder and the folder inside to view the media files.
5)
Select the files and drag them into your computer. Optionally, select the files and choose Copy from the
6)
We recommend that you copy the images into the Pictures folder and the videos into the Movies folder.
7)
Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way to
Finder‟s Edit menu. Then select a folder and choose Paste from the Edit menu.
your computer.
Camera Maintenance
The digital camera is a delicate device. Please handle your camera with care to avoid damaging it.
Do not expose your camera to heat sources.
Do not open the battery compartment with wet hands.
Dry the camera with a soft dry towel before opening the battery compartment before inserting an SD card.
Do not charge the camera with the AC Adapter if the camera is wet.
62
Sakar Warranty Card
This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to
function properly UNDER NORMAL USAGE, due to defects in material or workmanship will be repaired at no
charge for parts or labor for a period of one year.
What Is Not Covered By Warranty:
Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions
from other than normal use, including but not limited to, repair by unauthorized parties, tampering, modification
or accident.
What To Do When Service Is Required:
When returning your defective product (postage pre-paid) for service, your package should include:
1)
Copy of original bill of sale
2)
A detailed written description of the problem.
3)
Your return address and telephone number (Daytime)
MAIL TO ADDRESS BELOW:
63
Sakar US
Sakar UK/Europe
Sakar Australia
Sakar International
Attention: Service Department
Return faulty camera to the
Attention: Service Department
2D, Siskin Parkway East
Refund Counter at the store
195 Carter Drive
4020 Middlemarch Business Park
where purchased
Edison, NJ
Coventry, CV3 4PE
08817
Technical Support
For technical support issues please visit our website at www.vivitar.com. You can find manuals, software and
FAQ‟s at the website. Can‟t find what you are looking for? E-mail us at support@vivitar.com and one of our
technical support team members will answer your questions. For phone support in the US please call
1-800-592-9541, in the UK call 0800 917 4831, in Australia call 1800-006-614. If you would like to call from
anywhere else, please visit www.vivitar.com for your local toll free number.
64
Troubleshooting
Q: I have taken photos and selected the “Get Images” button. I get a message that the images
were successfully transferred but the photos do not appear on my computer. What do I do?
First ensure that you have in fact taken photos. Press the Shutter button to take some sample photos and then
try downloading them again.
With test photos if the camera powers off before you upload them to the computer the photos are not stored in
the camera`s memory. These photos should be uploaded quickly before the camera powers off.
If the photos are saved to the SD memory card then all the photos should appear.
Q: How do I make sure I don't lose important pictures?
This camera requires an SD card for normal use. If the camera powers off nothing will happen to the images
stored on the SD memory card. We recommend always downloading your photos to your computer as soon as
possible to prevent unintentional data loss.
Q: I deleted images using the Vivitar Experience Image Manager. The images where also deleted from
my computer. How do I recover images that I accidently deleted?
All images deleted using the Vivitar Experience Image Manager are sent to your computer`s Recycle or Trash
Bin and can be retrieved from there.
VT026-280310-GES
65