Showline SL WASH 350 RGBW User`s manual

SL WASH 350 RGBW LED Luminaire
Showline Offices
Dallas
10911 Petal Street
Dallas, TX 75238
Tel: +1 214-647-7880
Fax: +1 214-647-8030
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: +64 9 481 0100
Fax: +64 9 481 0101
Asia
Unit C, 14/F, Roxy Industrial Centre
No. 41-49 Kwai Cheong Road
Kwai Chung, N.T., Hong Kong
Tel: +852 2796 9786
Fax: +852 2798 6545
Europe
Rondweg zuid 85
Winterswijk 7102 JD
The Netherlands
Tel: +31 (0) 543-542516
www.philips.com/showline
The material in this manual is for information purposes only and is subject to change without notice. Showline
assumes no responsibility for any errors or omissions which may appear in this manual. For comments and
suggestions regarding corrections and/or updates to this manual, please contact your nearest Showline office.
El contenido de este manual es solamente para información y está sujeto a cambios sin previo aviso. Showline no
asume responsabilidad por errores o omisiones que puedan aparecer. Cualquier comentario, sugerencia o corrección
con respecto a este manual, favor de dirijirlo a la oficina de Showline más cercana.
Der Inhalt dieses Handbuches ist nur für Informationszwecke gedacht, Aenderungen sind vorbehalten. Showline
uebernimmt keine Verantwortung für Fehler oder Irrtuemer, die in diesem Handbuch auftreten. Für Bemerkungen
und Verbesserungsvorschlaege oder Vorschlaege in Bezug auf Korrekturen und/oder Aktualisierungen in diesem
Handbuch, moechten wir Sie bitten, Kontakt mit der naechsten Showline-Niederlassung aufzunehmen.
Le matériel décrit dans ce manuel est pour information seulement et est sujet à changements sans préavis. La
compagnie Showline n'assume aucune responsibilité sur toute erreur ou ommission inscrite dans ce manuel. Pour
tous commentaires ou suggestions concernant des corrections et/ou les mises à jour de ce manuel, veuillez s'il vous
plait contacter le bureau de Showline le plus proche.
Note: Information contained in this document may not be duplicated in full or in part by any person without prior written
approval of Showline. Its sole purpose is to provide the user with conceptual information on the equipment mentioned. The use of
this document for all other purposes is specifically prohibited.
Document Number: SL WASH 350 RGBW LED Luminaires Users
Version as of: 18 April 2014
SL WASH 350 RGBW LED Luminaire Installation & User’s Manual
©2014 Philips Group. All rights reserved.
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
IMPORTANT INFORMATION
Warnings and Notices
When using electrical equipment, basic safety precautions should always be followed including the following:
a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b. Do not use outdoors.
c. Do not mount near gas or electric heaters.
d. Equipment should be mounted in locations and at heights where it will not readily be subjected to
tampering by unauthorized personnel.
e. The use of accessory equipment not recommended by the manufacturer may cause an unsafe
condition.
f. Do not use this equipment for other than intended use.
g. Refer service to qualified personnel.
SAVE THESE INSTRUCTIONS.
WARNING: You must have access to a main circuit breaker or other power disconnect device
before installing any wiring. Be sure that power is disconnected by removing fuses or turning the
main circuit breaker off before installation. Installing the device with power on may expose you to
dangerous voltages and damage the device. A qualified electrician must perform this installation.
WARNING: Refer to National Electrical Code® and local codes for cable specifications. Failure to
use proper cable can result in damage to equipment or danger to personnel.
WARNING: This equipment is intended for installation in accordance with the National Electric
Code® and local regulations. It is also intended for installation in indoor applications only. Before
any electrical work is performed, disconnect power at the circuit breaker or remove the fuse to avoid
shock or damage to the control. It is recommended that a qualified electrician perform this
installation.
Note: Products described in and covered by this manual use Light Emitting Diodes (LEDs) as their light source. The Blue LED and objects with
high color temperature used in these products have been classified to and compliant with EN 62471-2008 in risk group 2 (RG 2) at a distance of
200mm and are classified under Blue light hazard assessment according to IEC/TR 62778. Yellow and red LEDs can be classified in exempt group
(RG 0).
CAUTION: Possible hazardous optical radiation may be emitted from the products described herein. Do not stare directly into light sources.
May be harmful to the eyes.
Additional Resources for DMX512
For more information on installing DMX512 control systems, the following publication is available for purchase
from the United States Institute for Theatre Technology (USITT), "Recommended Practice for DMX512: A Guide
for Users and Installers, 2nd edition" (ISBN: 9780955703522). USITT Contact Information:
USITT
315 South Crouse Avenue, Suite 200
Syracuse, NY 13210-1844
Phone: 1.800.938.7488 or 1.315.463.6463
www.usitt.org
Showline Limited Two-Year Warranty
Showline offers a two-year limited warranty of its luminaires against defects in materials or workmanship from the
date of delivery. A copy of Showline two-year limited warranty containing specific terms and conditions can be
obtained by contacting your local Showline office.
Sh wline
1
Installation & User’s Manual
SL WASH 350 RGBW LED Luminaire
TABLE OF CONTENTS
Showline Offices......................................................................................................................................Inside Front Cover
IMPORTANT INFORMATION
Warnings and Notices......................................................................................................................................................... 1
Additional Resources for DMX512.................................................................................................................................... 1
Showline Limited Two-Year Warranty .............................................................................................................................. 1
TABLE OF CONTENTS
PREFACE
About this Manual ...................................................................................................................................................................... 4
Included Items............................................................................................................................................................................. 4
Accessories ................................................................................................................................................................................. 4
SL WASH 350 RGBW LED Luminaire Accessories ........................................................................................................ 4
SL WASH 350 RGBW LED LUMINAIRE OVERVIEW
SL WASH 350 RGBW LED Luminaire Components................................................................................................................ 5
Major Luminaire Components............................................................................................................................................ 5
LCD Display / Menu System.............................................................................................................................................. 6
INSTALLATION AND SET UP
Power Requirements ................................................................................................................................................................... 7
AC Power Operation........................................................................................................................................................... 7
Connecting Power....................................................................................................................................................................... 8
Connecting SL WASH 350 RGBW LED Luminaires to AC Power.................................................................................. 8
Connecting to the DMX512 Network......................................................................................................................................... 9
Mounting Luminaire ................................................................................................................................................................. 10
OPERATION AND PROGRAMMING
LCD Display and Menu System ............................................................................................................................................... 11
LCD Display and Menu System Operation .............................................................................................................................. 11
SL WASH 350 RGBW LED Luminaire Main Menu Options.................................................................................................. 12
Presets ............................................................................................................................................................................... 12
Recalling or Editing Presets.............................................................................................................................................. 12
Color Filter........................................................................................................................................................................ 13
Effects ............................................................................................................................................................................... 13
Editing User Chases.......................................................................................................................................................... 13
Edit Rainbow .................................................................................................................................................................... 14
Strobe/Timing ................................................................................................................................................................... 14
Settings/Security ............................................................................................................................................................... 15
Settings/General................................................................................................................................................................ 16
Settings/Factory Default ................................................................................................................................................... 16
Settings/DMX ................................................................................................................................................................... 16
Settings/DMX Control Channel........................................................................................................................................ 17
Settings / LED Group ....................................................................................................................................................... 17
Settings/Display ................................................................................................................................................................ 17
Lock Fixture...................................................................................................................................................................... 17
Password (PassPIN).......................................................................................................................................................... 18
Status................................................................................................................................................................................. 18
Quick Selection Buttons ................................................................................................................................................... 18
DMX Address ................................................................................................................................................................... 18
Harmonize Color Calibration.................................................................................................................................................... 19
Dimming Curve Selection ........................................................................................................................................................ 19
Master / Slave Operational Mode ............................................................................................................................................. 20
DMX CONTROL
16-Bit Mode.............................................................................................................................................................................. 21
16-Bit Group Modes ................................................................................................................................................................. 24
8-Bit RGBW Mode................................................................................................................................................................... 25
8-Bit RGBW Group Modes ...................................................................................................................................................... 28
Simple RGBW 8-Bit Mode....................................................................................................................................................... 29
Simple RGBW 8-Bit Group Modes.......................................................................................................................................... 30
2
TABLE OF CONTENTS
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
HSIC Mode ...............................................................................................................................................................................
HSIC Group Modes ..................................................................................................................................................................
SL WASH 350 RGBW LED Luminaire DMX Timing Channel Detail...................................................................................
SL WASH 350 RGBW LED Luminaire RDM Parameter IDs.................................................................................................
CLEANING AND CARE
Special Cleaning and Care Instructions ....................................................................................................................................
Front Lens Cleaning..................................................................................................................................................................
Service and Maintenance ..........................................................................................................................................................
TECHNICAL SPECIFICATIONS
SL WASH 350 RGBW LED Luminaire Operational Specifications .......................................................................................
SL WASH 350 RGBW LED Luminaire Dimensions...............................................................................................................
Sh wline
31
32
33
39
43
43
43
44
44
3
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
PREFACE
1. About this Manual
The document provides installation and operation instructions for the following products:
• SL WASH 350 RGBW LED Luminaire
Please read all instructions before installing or using this product. Retain this manual for future reference. Additional
product information and descriptions may be found on the product specification sheet.
Note: The SL WASH 350 RGBW LED Luminaire is universal voltage 100 to 240 VAC (auto-ranging).
2. Included Items
Each SL WASH 350 RGBW LED Luminaire includes the following items:
SL WASH 350 RGBW
LED Luminaire
QuickStart Guide
Omega Mounts
Snoot
AC Input Cable (1M)
(USA, Canada, & Latin
America Markets Only)
AC Input Cable (1.5M)
(International Markets Only)
Figure 1: Included Items
3. Accessories
SL WASH 350 RGBW LED Luminaire Accessories
Part Number
4
PREFACE
Description
MC
Mega Claw, Black, Anodized
SC
Molded Yoke C-Clamp
HC
Light Weight Half Coupler
82003
Safety Cable
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
SL WASH 350 RGBW LED LUMINAIRE OVERVIEW
1. SL WASH 350 RGBW LED Luminaire Components
Major Luminaire Components
Snoot (detachable)
Luminaire Head
Luminaire Yoke
Luminaire Base Handle (x2)
Luminaire Base
LCD Display / Menu System
DMX512 /
RDM Input
DMX512 /
RDM Output
AC Output
AC Input
Bottom of Base
Figure 2: SL WASH 350 RGBW LED Luminaire Components
Sh wline
SL WASH 350 RGBW LED Luminaire Components
5
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
LCD Display / Menu System
Edit a Preset
Edit a Chase
Home (menu settings)
DMX512 Addressing
Return to Main Screen
LCD Display
SL WASH 350
DOWN Arrow Button
LEFT Arrow Button
UP Arrow Button
RIGHT Arrow Button
CHECK MARK (Accept) Button
NOTE: Menu rotates with orientation of luminaire and
menu buttons are always in the same position (with
rotation of menu)
To rotate menu 180 degrees from current orientation,
press and hold the two center buttons for 2 seconds.
Figure 3: LCD Display & Menu System
Note: For Menu operation and programming details, refer to "LCD Display and Menu System" on page 11.
6
SL WASH 350 RGBW LED LUMINAIRE OVERVIEW
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
INSTALLATION AND SET UP
1. Power Requirements
The SL WASH 350 RGBW LED Luminaire operates on AC input voltages from 100 to 240 VAC.
WARNING! This unit does not contain an ON/OFF switch. Always disconnect power input cable to completely
remove power from unit when not in use.
AC Power Operation
When connected to an AC source, the unit operates on 100 to 240 volts AC (+/- 10%, auto-ranging). The luminaire
contains an auto-ranging power supply. Each luminaire can draw up to 360 Watts.
WARNING! Maximum amount of units that may be daisy-chained is (A) 4 units at 100VAC (15 Amps) or (B) 10
units 240VAC (15 Amps). Refer to Table 1 for detailed information at various voltages.
Note: For wiring of AC input connector, refer to "Connecting SL WASH 350 RGBW LED Luminaires to AC
Power" on page 8.
Table 1: SL WASH 350 RGBW LED Luminaire Voltage vs. Current
Voltage
(AC)
Total
Current (A)
Maximum
number of
units that can
be linked
together*
Voltage
(AC)
Total
Current (A)
Maximum
number of
units that can
be linked
together*
100
3.6
4
180
2.0
7
110
3.3
4
190
1.9
7
120
3.0
5
200
1.8
8
130
2.8
5
210
1.7
8
140
2.6
5
220
1.6
9
150
2.4
6
230
1.6
9
160
2.3
6
240
1.5
10
170
2.1
7
WARNING! *These figures are based on the Maximum Allowable Input Current of 15 Amps (and the maximum
power supply limit of 360 Watts of each connected unit). Do not overload circuits!
IMPORTANT AC POWER CONNECTION NOTES:
a. When using the daisy-chain connection method, ONLY connect SL WASH 350 RGBW LED Luminaires
to AC Output Connection of SL WASH 350 RGBW LED Luminaires. DO NOT CONNECT OTHER
TYPES OF LUMINAIRES OR DEVICES!
b. Use only use approved cable types.
c. Do not overload circuits!
d. Do not connect SL WASH 350 RGBW LED Luminaires to dimmed circuits.
e. The MAXIMUM allowable number of SL WASH 350 RGBW LED Luminaires which can be 'daisychained' on one power feed are listed in Table 1, above. DO NOT EXCEED!
Sh wline
Power Requirements
7
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
2. Connecting Power
Units can be powered in one of two ways:
• Direct connection to a AC power source using an AC input cable. For wiring of AC input connector, refer to "Connecting SL WASH 350 RGBW LED Luminaires to AC Power" below.
• Connection from the AC output of another SL WASH 350 RGBW LED Luminaire. When using this method, it is
very important not to connect any other type of equipment device.
WARNING! Only connect other SL WASH 350 RGBW LED Luminaires to the AC Output (Thru) connector of a
SL WASH 350 RGBW LED Luminaire.
Connecting SL WASH 350 RGBW LED Luminaires to AC Power
If the unit is supplied with an AC input cable without an input connector installed. The input connector is a usersupplied accessory.
Table 2 on page 8 describes how to connect power to your SL WASH 350 RGBW LED Luminaire. Field wiring of
the SL WASH 350 RGBW LED Luminaire is straight forward. A total of 3 wires/conductors is supplied from the
unit. The following wiring scheme is used:
Table 2: SL WASH 350 RGBW LED Luminaire (IP20 Rated Models) AC Input Connections
Wire Color
Purpose
Brown
Main / Line (100 to 240VAC)
Blue
Neutral
Green/Yellow
Ground (Earth)
CAUTION: In the event the supplied AC input cable (international markets - outside North America) OR AC input
connector (North American markets) is damaged, they must be replaced with an approved replacement through your
Authorized Showline Dealer or Service Center.
Base of Unit
AC Output
AC Input
AC Output Connector (on Unit)
Main /
Line
AC Input Connector (on Unit)
Neutral
AC Connector
(on side of unit)
Ground / Earth
Main /
Line
Neutral
AC Connector
(on side of unit)
Ground / Earth
Figure 4: SL WASH 350 RGBW LED Luminaire AC Input & Output Connections
8
INSTALLATION AND SET UP
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
3. Connecting to the DMX512 Network
Basic DMX512 installation consists of connecting multiple SL WASH 350 RGBW LED Luminaires together (up to
32 luminaires) in "daisy-chain" fashion. A cable runs from the control console (or DMX512 control source) to the
DMX connector on the first SL WASH 350 RGBW LED Luminaire. Another cable runs from the other DMX
connector on the first unit to a DMX connector on the next SL WASH 350 RGBW LED Luminaire (or DMX512
device to be controlled).
DMX512 / RDM Output
DMX512 / RDM Input
Base of Unit
Figure 5: SL WASH 350 RGBW LED Luminaire DMX512 Input / Output Connections
Note: For more information on DMX512 networking and systems, refer to "Additional Resources for DMX512" on
page 1. For SL WASH 350 RGBW LED Luminaire DMX Mapping, refer to "DMX CONTROL" on page 21.
DMX512
(from console or
control device)
DMX512 (out from first
to second luminaire)
DMX512 (out to the next
luminaire or DMX512
controlled device)
SL WASH 350 RGBW
LED Luminaires
DMX512 Connections
DMX512 Signal
XLR Pin
Common (Drain)
1
DMX512 -
2
DMX512 +
3
Note: Remaining pins on each connector are not used.
Figure 6: SL WASH 350 RGBW LED Luminaire - DMX512 Connections
Sh wline
Connecting to the DMX512 Network
9
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
4. Mounting Luminaire
SL WASH 350 RGBW LED Luminaires are provided with the ability to hang via truss hooks, clamps, etc. (sold
separately) or floor mounted (sitting on fixture base). Securely attach a hook, clamp, etc. to each Omega Mount (two
supplied with unit). Attached the Omega Mounts to the luminaire base as illustrated in Figure 7 via the Camlocks.
It is recommended (and may be required by local and national safety codes) to use and install a safety cable (sold
separately).
Whether hanging the fixture or free-standing on its base, be sure to leave enough space around the luminaire to allow
proper, uninterrupted airflow for cooling and fixture head movement.
Note: Mounting hooks, clamps, etc. are sold separately or by others. For available mounting accessories refer to
"Accessories" on page 4.
Hooks / Clamps
(Sold Separately)
Note: Always dress and secure cabling to truss
or structure so the luminaire head and yoke
assemblies have free, unrestrained movement.
Omega Mount (x2)
(supplied with unit)
Luminaire Base
SAFETY CABLE: Is sold separately
and recommended for all hanging
installation and may be required by
national and local codes. The
handles (on the base) can be used
as safety cable anchor points for this
fixture. Note, two hooks, clamps, etc.
must be used on this fixture when
hanging.
Luminaire Yoke
Luminaire Head
Bottom of Fixture Base
6.2 in /
157 mm
4 Camlock Positions
4.2 in /
106 mm
Omega Mounts
Figure 7: Mounting Luminaire - Hanging Applications
10
INSTALLATION AND SET UP
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
OPERATION AND PROGRAMMING
1. LCD Display and Menu System
The SL WASH 350 RGBW LED Luminaire’s LCD Display and Menu System provides local control for accessing
the following fixture’s settings:
• Presets (Standard and User Defined)
• Color Filters
• Effects (Chases - preloaded and user defined)
• Strobe / Timing
• Fixture Settings
• Fixture Lockout (to prevent changes)
• Password Setting
• Current Fixture Operational Status
• Setting the DMX512 Address
Note: If there are multiple luminaires in a system, changes would need to be made at each LCD Menu as desired. For
SL WASH 350 RGBW LED Luminaire menu structure, see "SL WASH 350 RGBW LED Luminaire Main Menu
Options" on page 12.
Upon power up, the LCD will display the main screen showing the product type/name. If DMX is enabled, the
programmed address will appear after power up.
2. LCD Display and Menu System Operation
The LCD Display Menu system consists of several categories. Use the Menu Buttons to access and make changes to
the menu items. When the desired menu item is reached, press the desired Menu Button to display the menu options
and to navigate and configure the menu options as required.
To navigate and access menu settings/selections:
Step 1. Make sure unit is powered and turned on.
Step 2. Press the desired button (as shown in Figure 8 on page 12) to access menu categories.
Step 3. Use UP | DOWN | LEFT | RIGHT arrow buttons to navigate through the various options and settings.
Step 4. Make changes as desired.
Step 5. Press CHECK MARK (OK) button to accept changes.
Sh wline
LCD Display and Menu System
11
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
.
Edit a Preset
Edit a Chase
DMX512 Addressing
Home (menu settings)
Return to Main Screen /
Return Up One Level
LCD Display
SL WASH 350
DOWN Arrow Button
LEFT Arrow Button
UP Arrow Button
RIGHT Arrow Button
OK (Check Mark) Button
NOTE: Menu rotates with orientation of Luminaire and
menu buttons are always in the same position (with
rotation of menu)
To rotate menu 180 degrees manually from current
orientation, press and hold the two center buttons for 2
seconds.
Figure 8: LCD Display and Menu System
3. SL WASH 350 RGBW LED Luminaire Main Menu Options
Presets
Presets are stored values of the luminaire's LED settings that can be recalled via the menu system or DMX. You can
customize up to 31 presets via the menu system.
Recalling or Editing Presets
To recall or edit a preset:
Step 1. Select Preset from the main menu or from the Preset shortcut key.
Edit a Preset
Step 2. The top left field indicates the current preset or Off, when this field is
selected (highlighted in blue), use the left and right buttons to scroll
through all presets
Edit a Preset
OFF
All Pixel
Step 3. If you wish to edit the preset, use the Up and Down keys to scroll through
the parameters. Once a parameter is selected, use the left and right arrow
buttons to make adjustments.
Notes:
• If security features are enabled, the Up and Down arrows will have no effect. See "Settings/Security" on page 15.
• Depending on the DMX map set assigned the DMX menu, different either RGBW or HSIC parameters will be
available.
Step 4. Once all values are adjusted as desired, press the Check Mark button to save the preset.
Step 5. The Save Preset Menu option will appear. Use the left and right arrow buttons to select the preset number to
save to.
Note: This function allows you to save your current edits to a different preset number than you began editing. This is
helpful to create copies of existing presets.
12
OPERATION AND PROGRAMMING
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Step 6. Press the Check Mark button to save the preset. You will be asked to confirm your saving operation.
Step 7. The preset is now saved and can be recalled via the menu or DMX.
Color Filter
Color filters are 43 factory made colors that utilize the Harmonize Color Calibration system (refer to "Harmonize
Color Calibration" on page 19 for more information). They can be recalled via the menu system or DMX.
To recall a color filter from the menu:
Step 1. Select Color Filter from the main menu
Step 2. The top indicates the current color filter or Off, when this field is selected (highlighted in blue), use the left
and right buttons to scroll through all color filters.
Step 3. Use the Up and Down arrow keys to toggle to the Master Intensity field. Use the Left and Right arrow keys
to adjust the Master Intensity.
Step 4. The menu will display a graphical indication of the color along with the color name.
Note: The color filter will remain ON until you select a preset, chase, other color filter or send the unit DMX.
Effects
Effects are chases stored values of the luminaire's LED settings that can be recalled via the menu system or DMX.
There are 10 factory defined chases and eight user adjustable chases. You can adjust the master intensity, speed, and
fade values for any of the 18 chases.
Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the different general
fixture settings. When finished, press the Check button to exit the menu level. The adjustable parameters are
described in Table 3.
Table 3: Effects Parameters
Parameter
Description
User Chase / Built-in Chase
Select from the 18 different chases.
Master Intensity
Adjust the master intensity for ALL chases.
Total Steps
Displays the total steps used by the chase. This field is not editable.
Speed
The total time each step of the chase will be recalled.
Fade
The percentage of the time assigned by the speed that is crossfaded between steps.
Editing User Chases
Eight User chases can be further customized to create different effects on the
fixture. To edit a User Chase, first use the up and down arrows to scroll to the Edit
User Chase field and then press the Check Mark button. The Edit User Chase
window will be displayed:
Edit a Chase
Edit a Chase
User Chase:
Master Intensity
Use the Up and Down buttons to select parameters and the Left and Right buttons
to assign the different general fixture settings. When finished, press the Check
button to exit the menu level.The adjustable parameters are described in Table 4.
2
39
Total Steps
%
3
Speed
1
Fade
100 %
S
Edit User Chase
Table 4: Chase Parameters
Parameter
User Chase
Description
Select which chase you wish to edit.
Total Steps
Displays the total steps used by the chase. This field is not editable.
Edit Step
Select a step to edit with the left right arrow buttons. Press the Check Mark button to edit
the step. (see To edit and save a Step:)
New Step
Add a step to the end of the chase. Press the Check Mark button to edit the new step.
(see To edit and save a Step:)
Delete Step
Delete the currently selected step in the Edit Step field. Press the Check Mark button to
delete the current step.
Rainbow
Press the Check Mark button to display the Rainbow Chase editor.
Sh wline
SL WASH 350 RGBW LED Luminaire Main Menu Options
13
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
To edit and save a Step:
Step 1. Select Edit Step or New Step from the Edit User Chase menu.
Step 2. The top left field indicates the preset or color filter to be used for the step. When set to OFF no preset or
color filter is to be used. Use the left and right buttons to scroll through all presets and color filters.
Step 3. Use the Up and Down keys to scroll through the output parameters. Once a parameter is selected, use the
left and right arrow buttons to make adjustments.
Notes:
• If security features are enabled, the Up and Down arrows will have no effect. See "Settings/Security" on page 15.
• Fixtures with multiple pixel control include a parameter titled "Pixel" that allows you to independently adjust the
output of each individual pixel or the entire fixture.
• Depending on the DMX map set assigned the DMX menu, different either RGBW or HSIC parameters will be
available.
Step 4. Once all values are adjusted as desired, press the Check Mark button to return to the Edit
User Chase screen.
Step 5. Continue editing steps as needed. When complete, press the Return to Main Menu button
or up one level (as shown to the right). to exit the Edit User Chase window.
Return to Main
Menu button
Step 6. The user chase is now saved and can be recalled via the menu or DMX.
Edit Rainbow
An additional option in the Edit User Chase options is to have the fixture generate a multi-colored chase using
different pixels from the fixture. When you select Rainbow from the Edit Step window the Edit Rainbow window will
display the following options.
Table 5: Rainbow Parameters
Parameter
Direction
Description
Select either right or left to define the direction the rainbow effect runs.
Number of Color
Select the number of colors used in the rainbow effect.
Current Color
Will display the values of the current color selected. Press the Check Mark button to edit
the selected color.
Delete Step
Delete the currently selected step in the Edit Step field. Press the Check Mark button to
delete the current step.
Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the settings. When
finished, press the Check button to exit the menu level.
The bottom of the Edit Rainbow window displays a graphical representation of the current
rainbow effect.
When finished editing the Rainbow, press the Main Menu button (as shown to the right). You will
be asked to confirm that you wish to save the rainbow. Select Yes to save and return to the Edit a
Chase window.
Return to Main
Menu button
Strobe/Timing
The Strobe/Timing menu allows you to assign strobe and timing values from the menu system. These settings are
instantly applied to any active Preset, Color filter, or chase.
Use the Up and Down buttons to select parameters and the Left and Right buttons to adjust the currently selected
parameter. The adjustable parameters are described in Table 6 on page 15.
14
OPERATION AND PROGRAMMING
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Table 6: Strobe / Timing Parameters
Parameter
Description
Master Intensity
Overall fixture output intensity level.
Strobe: X
Strobe mode and rate value settings following DMX map (see DMX CONTROL for
details).
Duration
The time each strobe flash remains ON.
Intensity Timing
The time used to change intensity values when running a chase.
Color Timing
The time used to change color values when running a chase.
Settings/Security
All Showline fixtures have a multiple level locking feature. This allows you to configure the fixture and allow
different menu access to multiple users. The menu system can be locked instantly or assigned to power on to a
particular lock level. You can assign three different 4-digit PIN (personal identification number) codes to each unlock
specific levels of functionality within the menu system.
Anytime the fixture is locked, each PIN code will unlock all functions except the pertaining features assigned via the
security level.
Note: The Level 3 PIN will always unlock all functions.
Table 7: Security Lock Levels
Lock Level
Level 1
Menu Functions Affected
Edit Presets, Edit Chases, and Settings Menu
Level 2
Settings Menu
Level 3
All
Use the Up and Down buttons to select security PIN codes. Press the Check button and then use Left and Right and
Up Down buttons to assign the pin code. Press the Check button to save the new PIN code.
The Power-Up Level parameter assigns a lock level to the fixture when power is applied. Use the Up and Down
buttons to select the Power-Up Level, and then use the Left and Right buttons to select the Power-up Level option.
Table 8: PIN Level Parameters
Parameter
Description
Enter Pass PIN
Enter a PIN code matching the level codes assigned in the Settings/Security menu to
toggle the current security level.
Level 1 PIN
Edit the PIN code used to toggle the Level 1 security.
Level 2 PIN
Edit the PIN code used to toggle the Level 2 security.
Level 3 PIN
Edit the PIN code used to toggle the Level 3 security.
Select the security level to default to when the fixture is powered ON.
Power-up Level
Sh wline
•
Disable PIN will disable all security functions.
•
Locked will lock all functions.
SL WASH 350 RGBW LED Luminaire Main Menu Options
15
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Settings/General
Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the different general
fixture settings. When finished, press the Check button to exit the menu level. The adjustable parameters are
described in Table 9.
Table 9: General Level Parameters
Parameter
Description
Power-Up
Select the action of the fixture when the unit is powered ON. You can select from Off, Last
Set, Color filters, presets, and chases.
Mode
Select either Master/Slave (see Master / Slave Operational Mode for more information).
Select Normal, Incandescent, or Reduced dimming response.
Dim Response
•
Normal: Fixture LEDs dim with a normal response.
•
Incandescent: Fixture LED’s dim with an incandescent emulation response. The
response to dimming commands will be slightly delayed at lower intensities.
•
Reduced: The response to dimming commands will be calculated with a smaller algorithm to provide emulation with other manufacturer's products.
Dimming Curve
Select one of four dimming curve choices (see Dimming Curve Selection for more
information).
Calibration
Toggle Harmonize Color Calibration on or off (see Harmonize Color Calibration for more
information).
Fan Control
Select Auto of Off fan operation (see DMX CONTROL for more information).
Settings/Factory Default
Factory default menu settings can be recalled through this menu option. You can select if you wish to overwrite the
user edited preset and chases.
Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the different settings.
When finished, press the Check button to exit the menu level. The adjustable parameters are described in Table 10.
Table 10: Factory Default Parameters
Parameter
Protected
Load Factory
Description
•
No - all menu items are able to be restored to factory defaults.
•
Preset & Chase - user edited Presets and Chases are not able to be restored to factory defaults.
•
No - no action.
•
Yes - restore to factory default menu settings.
Settings/DMX
DMX configuration options are available in the DMX menu.
Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the fixture's DMX
settings. When finished, press the Check button to exit the menu level. The adjustable parameters are described in
Table 11.
Table 11: DMX Setting Parameters
Parameter
DMX Enable
Description
•
Enable - Fixture will respond to DMX commands/signals.
•
Disable - Fixture will ignore DMX commands/signals.
Address
Assigns the fixture’s DMX start address.
Map
Selects the DMX map for the fixture to use (see DMX CONTROL section for more
information).
Selects the action of the fixture when the unit is powered ON and not receiving DMX.
When no DMX
LED Group
16
OPERATION AND PROGRAMMING
•
Off - Turn off all LED output.
•
Last Action - restore the last menu action.
•
Power-up - follow the power-up value in the settings menu.
•
Hold - continue with the last DMX values received.
Select the number of LED groups to control via DMX (see DMX CONTROL section for
more information)
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Settings/DMX Control Channel
DMX configuration options are available in the DMX Control Channel menu.
Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the fixture's DMX
settings. When finished, press the Check button to exit the menu level. The adjustable parameters are described in
Table 12.
Table 12: DMX Setting Parameters
Parameter
Description
Dim Response Normal
Fixture LEDs dim with a normal response.
Dim Response Incandescent
Fixture LED's dim with an incandescent emulation response. The response to dimming
commands will be slightly delayed at lower intensities.
Dimming Curve Linear
Applies a linear control of the output of the fixture based on the DMX values on the
Intensity Control Channels. See Dimming Curve Selection for more details.
Dimming Curve Square
Applies a square law control of the output of the fixture based on the DMX values on the
Intensity Control Channels. See Dimming Curve Selection for more details.
Dimming Curve S-Curve
Applies an S-Curve control of the output of the fixture based on the DMX values on the
Intensity Control Channels. See Dimming Curve Selection for more details.
Dimming Curve PL-Curve
Applies a dimming curve that follows the Philips Selecon PL series LED Luminaires
control of the output of the fixture based on the DMX values on the Intensity Control
Channels. See Dimming Curve Selection for more details.
Calibration OFF
Toggle Harmonize Color Calibration OFF (see Harmonize Color Calibration for more
information).
Calibration ON
Toggle Harmonize Color Calibration ON (see Harmonize Color Calibration for more
information).
Fan Auto
Fixture fans come on as needed and will still vary in speed, but will not exceed the factory
set minimal noise limit.
Fan Off
Fixture fans will remain off in all circumstances and the fixture will automatically reduce
LED output levels if LED temperatures rise above factory settings.
Settings / LED Group
Select the number of LED groups to control via DMX (see the individual modes contained in "DMX CONTROL" on
page 21 for details).
Settings/Display
Options of the fixture's LCD display can be adjusted in the Display menu.
Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the fixture's DMX
settings. When finished, press the Check button to exit the menu level. The adjustable parameters are described in
Table 13.
Table 13: LCD Display Parameters
Parameter
Flip Display
Description
•
Yes - The display will be inverted.
•
No - The display will not be inverted.
•
Auto - The display will automatically invert depending upon fixture orientation.
Off Time
Assign a time for the display to automatically turn off after the last button press. A value of
ON will leave the display on indifferently.
Language Select
English is the only language currently supported.
Lock Fixture
You can lock all fixture functions, requiring a PIN code to access the menu functions. When you select this menu
item, you are asked to confirm that you wish to lock the fixture. Once locked, all menu items can only be accessed by
entering one of the three PIN codes assigned in the Settings/Security menu. (see "Settings/Security" on page 15 for
more information). The PIN code used to unlock the fixture will only unlock the functionality assigned to that
particular PIN code.
Note: When the fixture is powered off, the Lock Fixture function will be disabled. To assign fixture power-up
security refer to (see "Settings/Security" on page 15 for more information).
Sh wline
SL WASH 350 RGBW LED Luminaire Main Menu Options
17
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Password (PassPIN)
The Password menu item will display an Enter PassPIN dialog box. Use the Up Down Left Right buttons to enter a
PIN code matching the codes assigned in the Settings/Security menu to toggle the current security level.
Status
The Status screen displays the current value of the master intensity and each LED of the luminaire. The number of
pixels will vary depending upon fixture type. Use the Up Down Left Right arrows to scroll through the different
LEDs and view their levels.
• The last Status item displayed shows the RDM UID and current Firmware Version.
• Press the Check Mark button to exit the Status screen.
Quick Selection Buttons
The Showline menu system includes four quick selection buttons on the top of the menu. These keys provide direct
access to common functions and act as shortcuts to main menu items as described in Table 13.
Table 14: Quick Select Buttons
Quick Select Button
Description
Main Menu
Refer to Settings/General for more information.
Edit a Preset
Refer to Recalling or Editing Presets for more information.
Effects / Edit a Chase
Refer to Effects and Editing User Chases for more information.
DMX Start Address
Refer to DMX Address for more information.
Return to Main Menu / Return Up a Menu Item
DMX Address
You can display and edit the current DMX start address for the fixture by
pressing the Quick Select button on the top of the menu system (as shown right).
The current DMX start address will be display in large digits.
DMX Address
Address
To edit the DMX start address:
Step 1. Press the Check Mark button to begin the DMX start address editing.
The last digit will change to a blue color.
Step 2. Use the UP and Down arrows to change the value of the currently
selected digit.
Step 3. Use the Left and Right arrows to select another digit to adjust.
Step 4. Press the Check Mark button to save the new DMX Start Address.
18
OPERATION AND PROGRAMMING
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
4. Harmonize Color Calibration
Harmonize is a proprietary, advanced LED color matching system,
consisting of 3 correction modules: RGB, RGBW and Cool White/Warm
White. Every Showline fixture undergoes rigorous testing to provide you
with consistent control of color and intensity as well as output of the highest
quality.
When enabled either via DMX or the fixture's menu, the Harmonize
technology will ensure that colors match from fixture-to-fixture and pixel-topixel. As the Harmonize system matches Showline products, they will all
operate in the same color space. Use the Harmonize system when perfect
color matching is an essential requirement.
Note: When attempting to achieve the most saturated colors possible,
disable the Harmonize color calibration.
5. Dimming Curve Selection
Through the menu, you are able to select one of four dimming curves:
• Linear Curve
• PL_Curve
• S_Curve
• Square Curve
0
Lumen Output
PL_Curve *
Lumen Output
Linear Curve
DMX Value
0
DMX Value
*PL Curve follows the dimming curve of Philips Selecon PL
series LED luminaires.
Square Curve
0
Lumen Output
Lumen Output
S_Curve
DMX Value
0
DMX Value
Figure 9: SL WASH 350 RGBW LED Luminaire Dimmer Curves
Sh wline
Harmonize Color Calibration
19
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
6. Master / Slave Operational Mode
The Master / Slave Operational Mode allows one SL WASH 350 RGBW LED Luminaire to act as the "Master" unit
and all other connected units are controlled by this unit. When a unit is set to "Slave" mode, it will only listen to and
follow any commands sent from a "Master" unit. Only one "Master" unit is allowed in this type of operation.
To setup a master / slave network:
Step 1. Set the first device in the DMX512 chain to Master Mode through the unit’s menu system.
Step 2. Set all other connected units to Slave Mode.
Step 3. The master unit can be controlled via DMX512, RDM or through standalone operation (self-contained
network utilizing on-board effects). The slave units will mimic the master unit’s operation in all cases.
Note: For more information on DMX512 networking and systems, refer to "Additional Resources for DMX512" on
page 1. For SL WASH 350 RGBW LED Luminaire DMX Mapping, refer to "DMX CONTROL" on page 21.
Optional:
DMX512 (in - from a
DMX controller)
DMX512 (out from first
to second luminaire)
DMX512 (out from second to
next luminaire)
Master Unit
Slave Unit
SL WASH 350 RGBW
LED Luminaires
Slave Unit
Figure 10: SL WASH 350 RGBW LED Luminaire - Master / Slave Configuration
20
OPERATION AND PROGRAMMING
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
DMX CONTROL
This section contains information for operating the luminaire using DMX control in 16-bit, 8-bit, Simple RGBW 8bit, or HSIC (Hue, Saturation, Intensity and Color Correction) modes. For Menu options and detailed information,
see "LCD Display and Menu System" on page 11.
Note: These tables assume a DMX start address of 1. When a different starting address is used, this address becomes
channel 1 function and other functions follow in sequence.
1. 16-Bit Mode
Table 15 provides DMX channel mapping of all DMX512 control values when the SL WASH 350 RGBW LED
Luminaire is in 16-bit DMX512 mode (as set by the luminaire’s menu system).
Table 15: DMX Channel Mapping (16-Bit Mode)
DMX
Channel
Parameter
1
Pan - High
2
Pan - Low
3
Tilt - High
4
Tilt - Low
5
Master Intensity - High
6
Master Intensity - Low
Range DMX
Range%
Default - recommended console
default values
0 - 65535
0 - 100%
32768
16-bit control for Pan operation
0 - 65535
0 - 100%
32768
16-bit control for Tilt operation
0 - 65535
0 - 100%
0
Description
16-bit control for Intensity of LED settings.
Select presets, variable color filters or chases as
follows:
7
Color Presets
0 - 255
0 - 100%
0
Channel OFF (disabled) DMX 0 - 4
Preset 0 (OFF) DMX 5 - 6
Preset 1 DMX 7 - 8
Preset 2 DMX 9 - 10
Preset 3 DMX 11 - 12
Preset 4 DMX 13 - 14
Preset 5 DMX 15 - 16
Preset 6 DMX 17 - 18
Preset 7 DMX 19 - 20
Preset 8 DMX 21 - 22
Preset 9 DMX 23 - 24
Preset 10 DMX 25 - 26
Preset 11 DMX 27 - 28
Preset 12 DMX 29 - 30
Preset 13 DMX 31 - 32
Preset 14 DMX 33 - 34
Preset 15 DMX 35 - 36
Preset 16 DMX 37 - 38
Preset 17 DMX 39 - 40
Preset 18 DMX 41 - 42
Preset 19 DMX 43 - 44
Preset 20 DMX 45 - 46
Preset 21 DMX 47 - 48
Preset 22 DMX 49 - 50
Preset 23 DMX 51 - 52
Preset 24 DMX 53 - 54
Preset 25 DMX 55 - 56
Preset 26 DMX 57 - 58
Preset 27 DMX 59 - 60
Preset 28 DMX 61 - 62
Preset 29 DMX 63 - 64
Preset 30 DMX 65 - 66
Preset 31 DMX 67 - 68
CONTINUED NEXT PAGE
Sh wline
16-Bit Mode
21
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Table 15: DMX Channel Mapping (16-Bit Mode)
CONTINUED FROM PREVIOUS PAGE
7
Color Presets
0 - 255
0 - 100%
0
CF_0_Color OFF DMX 69 - 70
CF_1_White 10000K DMX 71 - 72
CF_2_White 8000K DMX 73 - 74
CF_3_White 6500K DMX 75 - 76
CF_4_White 5600K DMX 77 - 78
CF_5_White 5000K DMX 79 - 80
CF_6_White 4500K DMX 81 - 82
CF_7_White 4000K DMX 83 - 84
CF_8_White 3200K DMX 85 - 86
CF_9_White 3000K DMX 87 - 88
CF_10_White 2700K DMX 89 - 90
CF_11_Moroccan Pink DMX 91 - 92
CF_12_Pink DMX 93 - 94
CF_13_Flesh Pink DMX 95 - 96
CF_14_Bright Rose DMX 97 - 98
CF_15_Follies Pink DMX 99 - 100
CF_16_Fuchsia Pink DMX 101 - 102
CF_17_Surprise Pink DMX 103 - 104
CF_18_Congo Blue DMX 105 - 106
CF_19_Blue DMX 107 - 108
CF_20_Virgin Blue DMX 109 - 110
CF_21_Midnight Maya DMX 111 - 112
CF_22_Double C.T Blue DMX 113 - 114
CF_23_Slate Blue DMX 115 - 116
CF_24_Regal Blue DMX 117 - 118
CF_25_Full C.T Blue DMX 119 - 120
CF_26_Steel Blue DMX 121 - 122
CF_27_Lighter Blue DMX 123 - 124
CF_28_Cyan DMX 125 - 126
CF_29_Marine Blue DMX 127 - 128
CF_30_Soft Green DMX 129 - 130
CF_31_Moss Green DMX 131 - 132
CF_32_Green DMX 133 - 134
CF_33_Fem Green DMX 135 - 136
CF_34_JAS Green DMX 137 - 138
CF_35_Pale Green DMX 139 - 140
CF_36_Spring Yellow DMX 141 - 142
CF_37_Yellow DMX 143 - 144
CF_38_Deep Amber DMX 145 - 146
CF_39_Chrome Orange DMX 147 - 148
CF_40_Orange DMX 149 - 150
CF_41_Magenta DMX 151 - 152
CF_42_Flame Red DMX 153 - 154
CF_43_Purple DMX 155 - 156
Rotate CW Fast -> Slow DMX 157 - 171
Rotate ACW Slow -> Fast DMX 172 - 186
Random Color Fast -> Slow DMX 187 - 201
Chase1 DMX 202 - 204
Chase2 DMX 205 - 207
Chase3 DMX 208 - 210
Chase4 DMX 211 - 213
Chase5 DMX 214 - 216
Chase6 DMX 217 - 219
Chase7 DMX 220 - 222
Chase8 DMX 223 - 225
Chase9 DMX 226 - 228
Chase10 DMX 229 - 231
User Chase1 DMX 232 - 234
User Chase2 DMX 235 - 237
User Chase3 DMX 238 - 240
User Chase4 DMX 241 - 243
User Chase5 DMX 244 - 246
User Chase6 DMX 247 - 249
User Chase7 DMX 250 - 252
User Chase8 DMX 253 - 255
22
DMX CONTROL
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Table 15: DMX Channel Mapping (16-Bit Mode)
8
Strobe
0 - 255
0 - 255
0 - 100%
0 - 100%
0
Controls strobe operations as follows:
Open = DMX 0 - 2
Closed = DMX 3 - 5
Slow Rand = DMX 6 - 7
Med Rand = DMX 8 - 10
Fast Rand = DMX 11 - 12
Strobe Range = DMX 13 - 127 (fastest)
Pulse + Slow Rand = DMX 128 - 129
Pulse + Med Rand = DMX 130 - 131
Pulse + Fast Rand = DMX 132 - 133
Pulse + Range = DMX 134 - 191
Pulse - Slow Rand = DMX 192 - 193
Pulse - Med Rand = DMX 194 - 195
Pulse - Fast Rand = DMX 196 - 197
Pulse - Range = DMX 198 - 255
0
Strobe Duration is 0 - 85
0 = DMX 0
1 = DMX 1 - 3
x = (DMX Value-1)/3+1
85 = DMX 253-255
Variable control of zoom from 8 to 40 degrees
9
Duration
10
Zoom
0 - 255
0 - 100%
0
11
Focus Timing
0 - 255
0 - 100%
255
Timing control of Pan/Tilt
12
Intensity Timing
0 - 255
0 - 100%
255
Allows for timing control of intensity. Channel
should default to 255 for smoothest actions using
console and/or manual fades.
13
Color Timing
0 - 255
0 - 100%
255
Allows for timing control of colors. Channel
should default to 255 for smoothest actions using
console and/or manual fades.
14
Zoom Timing
0 - 255
0 - 100%
255
Allows for timing control of zoom operation.
Channel should default to 255 for smoothest
actions using console and/or manual fades.
Control Channel functions of the SL Series
products. Set control channel value from 0 then
turn to desired action. Hold value for at least 5
seconds, then turn to 0. Set control channel
value to 0 without any scaling.
15
Control
16
Red 1-3, High Byte
17
Red 1-3, Low Byte
18
Green 1-3, High Byte
19
Green 1-3, Low Byte
20
Blue 1-3, High Byte
21
Blue 1-3, Low Byte
22
White 1-3, High Byte
23
White 1-3, Low Byte
0 - 255
0 - 100%
0
Default Setting on Console = DMX 0-4
DIM Response _Normal = DMX 5 - 9
DIM Response_Incandescent = DMX 10 - 14
Dimming Curve_linear = DMX 30 - 34
Dimming Curve_Square = DMX 35- 39
Dimming Curve_S-Curve = DMX 40 - 44
Dimming Curve_PL-Curve = DMX 45 - 49
Calibration_OFF = DMX 70 - 74
Calibration_ON = DMX 75 - 79
Fan_Auto = DMX 80 - 84
Fan_Off = DMX 85 - 89
Reserved ( Future use) = DMX 90 - 250
Sh wline
0 - 65535
0 - 100%
0
16-bit control for of Red LEDs 0 to full.
0 - 65535
0 - 100%
0
16-bit control for of Green LEDs 0 to full.
0 - 65535
0 - 100%
0
16-bit control for of Blue LEDs 0 to full.
0 - 65535
0 - 100%
0
16-bit control for of White LEDs 0 to full.
16-Bit Mode
23
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
2. 16-Bit Group Modes
Table 16 provides DMX channel mapping of all DMX512 control values when the SL WASH 350 RGBW LED
Luminaire is operated in various 16-bit DMX512 Group Control Modes.
Table 16: DMX Channel Mapping (16-Bit Group Modes)
DMX CHANNEL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
RGBW 16 BIT MODE
3 Group MODE
Pan - High Byte
1 Group MODE
Pan - High Byte
Pan - Low Byte
Pan - Low Byte
Tilt - High Byte
Tilt - High Byte
Tilt - Low Byte
Tilt - Low Byte
Master Intensity - High
Master Intensity - High
Master Intensity - Low
Master Intensity - Low
C olor Presets
C olor Presets
Strobe
Strobe
Duration
Duration
Zoom
Zoom
Focus Timing
Focus Timing
Intensity Timing
Intensity Timing
C olor Timing
C olor Timing
Zoom Timing
Zoom Timing
C ontrol
C ontrol
Red_1 - High Byte
Red_1-3 - High Byte
Red_1 - Low Byte
Red_1-3 - Low Byte
Green_1 - High Byte
Green_1-3 - High Byte
Green_1 - Low Byte
Green_1-3 - Low Byte
Blue_1 - High Byte
Blue_1-3 - High Byte
Blue_1 - Low Byte
Blue_1-3 - Low Byte
White_1 - High Byte
White_1-3 - High Byte
White_1 - Low Byte
White_1-3 - Low Byte
Red_2 - High Byte
Red_2 - Low Byte
Green_2 - High Byte
Green_2 - Low Byte
Blue_2 - High Byte
Blue_2 - Low Byte
White_2 - High Byte
White_2 - Low Byte
Red_3 - High Byte
Red_3 - Low Byte
Green_3 - High Byte
Green_3 - Low Byte
Blue_3 - High Byte
Blue_3 - Low Byte
White_3 - High Byte
White_3 - Low Byte
Note: Refer to previous DMX mapping information for Color Presets, Strobe, Duration,
Intensity Timing, Color Timing, and Control channels.
24
DMX CONTROL
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
3. 8-Bit RGBW Mode
Table 17 provides DMX channel mapping of all DMX512 control values when the SL WASH 350 RGBW LED
Luminaire is in 8-bit DMX512 mode (as set by the luminaire’s menu system).
Table 17: DMX Channel Mapping (8-Bit RGBW Mode)
DMX
Channel
Parameter
1
Pan - High
2
Pan - Low
3
Tilt - High
4
Tilt - Low
5
Master Intensity
Range DMX
Range%
Default - recommended console
default values
0 - 65535
0 - 100%
32768
16-bit control for Pan operation
0 - 65535
0 - 100%
32768
16-bit control for Tilt operation
0 - 255
0 - 100%
0
Description
8-bit control for Intensity of LED settings.
Select presets, variable color filters or chases as
follows:
6
Color Presets
6
0 - 100%
0
Channel OFF (disabled) DMX 0 - 4
Preset 0 (OFF) DMX 5 - 6
Preset 1 DMX 7 - 8
Preset 2 DMX 9 - 10
Preset 3 DMX 11 - 12
Preset 4 DMX 13 - 14
Preset 5 DMX 15 - 16
Preset 6 DMX 17 - 18
Preset 7 DMX 19 - 20
Preset 8 DMX 21 - 22
Preset 9 DMX 23 - 24
Preset 10 DMX 25 - 26
Preset 11 DMX 27 - 28
Preset 12 DMX 29 - 30
Preset 13 DMX 31 - 32
Preset 14 DMX 33 - 34
Preset 15 DMX 35 - 36
Preset 16 DMX 37 - 38
Preset 17 DMX 39 - 40
Preset 18 DMX 41 - 42
Preset 19 DMX 43 - 44
Preset 20 DMX 45 - 46
Preset 21 DMX 47 - 48
Preset 22 DMX 49 - 50
Preset 23 DMX 51 - 52
Preset 24 DMX 53 - 54
Preset 25 DMX 55 - 56
Preset 26 DMX 57 - 58
Preset 27 DMX 59 - 60
Preset 28 DMX 61 - 62
Preset 29 DMX 63 - 64
Preset 30 DMX 65 - 66
Preset 31 DMX 67 - 68
CONTINUED NEXT PAGE
Sh wline
8-Bit RGBW Mode
25
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Table 17: DMX Channel Mapping (8-Bit RGBW Mode)
CONTINUED FROM PREVIOUS PAGE
6
Color Presets
0 - 255
0 - 100%
0
CF_0_Color OFF DMX 69 - 70
CF_1_White 10000K DMX 71 - 72
CF_2_White 8000K DMX 73 - 74
CF_3_White 6500K DMX 75 - 76
CF_4_White 5600K DMX 77 - 78
CF_5_White 5000K DMX 79 - 80
CF_6_White 4500K DMX 81 - 82
CF_7_White 4000K DMX 83 - 84
CF_8_White 3200K DMX 85 - 86
CF_9_White 3000K DMX 87 - 88
CF_10_White 2700K DMX 89 - 90
CF_11_Moroccan Pink DMX 91 - 92
CF_12_Pink DMX 93 - 94
CF_13_Flesh Pink DMX 95 - 96
CF_14_Bright Rose DMX 97 - 98
CF_15_Follies Pink DMX 99 - 100
CF_16_Fuchsia Pink DMX 101 - 102
CF_17_Surprise Pink DMX 103 - 104
CF_18_Congo Blue DMX 105 - 106
CF_19_Blue DMX 107 - 108
CF_20_Virgin Blue DMX 109 - 110
CF_21_Midnight Maya DMX 111 - 112
CF_22_Double C.T Blue DMX 113 - 114
CF_23_Slate Blue DMX 115 - 116
CF_24_Regal Blue DMX 117 - 118
CF_25_Full C.T Blue DMX 119 - 120
CF_26_Steel Blue DMX 121 - 122
CF_27_Lighter Blue DMX 123 - 124
CF_28_Cyan DMX 125 - 126
CF_29_Marine Blue DMX 127 - 128
CF_30_Soft Green DMX 129 - 130
CF_31_Moss Green DMX 131 - 132
CF_32_Green DMX 133 - 134
CF_33_Fem Green DMX 135 - 136
CF_34_JAS Green DMX 137 - 138
CF_35_Pale Green DMX 139 - 140
CF_36_Spring Yellow DMX 141 - 142
CF_37_Yellow DMX 143 - 144
CF_38_Deep Amber DMX 145 - 146
CF_39_Chrome Orange DMX 147 - 148
CF_40_Orange DMX 149 - 150
CF_41_Magenta DMX 151 - 152
CF_42_Flame Red DMX 153 - 154
CF_43_Purple DMX 155 - 156
Rotate CW Fast -> Slow DMX 157 - 171
Rotate ACW Slow -> Fast DMX 172 - 186
Random Color Fast -> Slow DMX 187 - 201
Chase1 DMX 202 - 204
Chase2 DMX 205 - 207
Chase3 DMX 208 - 210
Chase4 DMX 211 - 213
Chase5 DMX 214 - 216
Chase6 DMX 217 - 219
Chase7 DMX 220 - 222
Chase8 DMX 223 - 225
Chase9 DMX 226 - 228
Chase10 DMX 229 - 231
User Chase1 DMX 232 - 234
User Chase2 DMX 235 - 237
User Chase3 DMX 238 - 240
User Chase4 DMX 241 - 243
User Chase5 DMX 244 - 246
User Chase6 DMX 247 - 249
User Chase7 DMX 250 - 252
User Chase8 DMX 253 - 255
26
DMX CONTROL
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Table 17: DMX Channel Mapping (8-Bit RGBW Mode)
7
Strobe
8
Duration
0 - 255
0 - 255
0 - 100%
0 - 100%
0
Controls strobe operations as follows:
Open = DMX 0 - 2
Closed = DMX 3 - 5
Slow Rand = DMX 6 - 7
Med Rand = DMX 8 - 10
Fast Rand = DMX 11 - 12
Strobe Range = DMX 13 - 127 (fastest)
Pulse + Slow Rand = DMX 128 - 129
Pulse + Med Rand = DMX 130 - 131
Pulse + Fast Rand = DMX 132 - 133
Pulse + Range = DMX 134 - 191
Pulse - Slow Rand = DMX 192 - 193
Pulse - Med Rand = DMX 194 - 195
Pulse - Fast Rand = DMX 196 - 197
Pulse - Range = DMX 198 - 255
0
Strobe Duration is 0 - 85
0 = DMX 0
1 = DMX 1 - 3
x = (DMX Value-1)/3+1
85 = DMX 253-255
9
Zoom
0 - 255
0 - 100%
0
10
Focus Timing
0 - 255
0 - 100%
255
Timing control of Pan/Tilt
Variable control of zoom from 8 to 40 degrees
11
Timing
0 - 255
0 - 100%
255
Allows for timing control of intensity, color, and
zoom parameters. Channel should default to 255
for smoothest actions using console and/or
manual fades.
Control Channel functions of the SL Series
products. Set control channel value from 0 then
turn to desired action. Hold value for at least 5
seconds, then turn to 0. Set control channel
value to 0 without any scaling.
Default Setting on Console = DMX 0-4
DIM Response _Normal = DMX 5 - 9
DIM Response_Incandescent = DMX 10 - 14
Dimming Curve_linear = DMX 30 - 34
Dimming Curve_Square = DMX 35- 39
Dimming Curve_S-Curve = DMX 40 - 44
Dimming Curve_PL-Curve = DMX 45 - 49
Calibration_OFF = DMX 70 - 74
Calibration_ON = DMX 75 - 79
Fan_Auto = DMX 80 - 84
Fan_Off = DMX 85 - 89
12
Control
0 - 255
0 - 100%
0
13
Red 1-3, High Byte
0 - 255
0 - 100%
0
8-bit control for of Red LEDs 0 to full.
14
Green 1-3, High Byte
0 - 255
0 - 100%
0
8-bit control for of Green LEDs 0 to full.
15
Blue 1-3, High Byte
0 - 255
0 - 100%
0
8-bit control for of Blue LEDs 0 to full.
16
White 1-3, High Byte
0 - 255
0 - 100%
0
8-bit control for of White LEDs 0 to full.
Reserved ( Future use) = DMX 90 - 250
Sh wline
8-Bit RGBW Mode
27
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
4. 8-Bit RGBW Group Modes
Table 18 provides DMX channel mapping of all DMX512 control values when the SL WASH 350 RGBW LED
Luminaire is operated in various 8-bit DMX512 Group Control Modes.
Table 18: DMX Channel Mapping (8-Bit Group Modes)
RGBW 8 BIT MODE
DMX CHANNEL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
3 Group MODE
1 Group MODE
Pan - High Byte
Pan - High Byte
Pan - Low Byte
Pan - Low Byte
Tilt - High Byte
Tilt - High Byte
Tilt - Low Byte
Tilt - Low Byte
Master Intensity
Master Intensity
C olor Presets
C olor Presets
Strobe
Strobe
Duration
Duration
Zoom
Zoom
Focus Timing
Focus Timing
Timing
Timing
C ontrol
C ontrol
Red_1
Red_1-3
Green_1
Green_1-3
Blue_1
Blue_1-3
White_1
White_1-3
Red_2
Green_2
Blue_2
White_2
Red_3
Green_3
Blue_3
White_3
Note: Refer to previous DMX mapping information for Color Presets, Strobe, Duration, Intensity
Timing, Color Timing, and Control channels.
28
DMX CONTROL
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
5. Simple RGBW 8-Bit Mode
Table 19 provides DMX channel mapping of all DMX512 control values when the SL WASH 350 RGBW LED
Luminaire is in Simple RGBW 8-bit DMX512 mode (as set by the luminaire’s menu system).
Table 19: DMX Channel Mapping (Simple RGBW 8-Bit Mode)
DMX
Channel
Parameter
1
Pan - High
2
Pan - Low
3
Tilt - High
4
Tilt - Low
5
Master Intensity
Range DMX
Range%
Default - recommended console
default values
0 - 65535
0 - 100%
32768
16-bit control for Pan operation
0 - 65535
0 - 100%
32768
16-bit control for Tilt operation
0 - 255
0 - 100%
0
8-bit control for Intensity of LED settings.
Description
6
Strobe
0 - 255
0 - 100%
0
Controls strobe operations as follows:
Open = DMX 0 - 2
Closed = DMX 3 - 5
Slow Rand = DMX 6 - 7
Med Rand = DMX 8 - 10
Fast Rand = DMX 11 - 12
Strobe Range = DMX 13 - 127 (fastest)
Pulse + Slow Rand = DMX 128 - 129
Pulse + Med Rand = DMX 130 - 131
Pulse + Fast Rand = DMX 132 - 133
Pulse + Range = DMX 134 - 191
Pulse - Slow Rand = DMX 192 - 193
Pulse - Med Rand = DMX 194 - 195
Pulse - Fast Rand = DMX 196 - 197
Pulse - Range = DMX 198 - 255
7
Zoom
0 - 255
0 - 100%
0
Variable control of zoom from 8 to 40 degrees
Control Channel functions of the SL Series
products. Set control channel value from 0 then
turn to desired action. Hold value for at least 5
seconds, then turn to 0. Set control channel
value to 0 without any scaling.
Default Setting on Console = DMX 0-4
DIM Response _Normal = DMX 5 - 9
DIM Response_Incandescent = DMX 10 - 14
Dimming Curve_linear = DMX 30 - 34
Dimming Curve_Square = DMX 35- 39
Dimming Curve_S-Curve = DMX 40 - 44
Dimming Curve_PL-Curve = DMX 45 - 49
Calibration_OFF = DMX 70 - 74
Calibration_ON = DMX 75 - 79
Fan_Auto = DMX 80 - 84
Fan_Off = DMX 85 - 89
8
Control
0 - 255
0 - 100%
0
9
Red 1-3
0 - 255
0 - 100%
0
8-bit control of Red LEDs.
10
Green 1-3
0 - 255
0 - 100%
0
8-bit control of Green LEDs.
11
Blue 1-3
0 - 255
0 - 100%
0
8-bit control of Blue LEDs.
12
White 1-3
0 - 255
0 - 100%
0
8-bit control of White LEDs.
Reserved ( Future use) = DMX 90 - 250
Sh wline
Simple RGBW 8-Bit Mode
29
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
6. Simple RGBW 8-Bit Group Modes
Table 16 provides DMX channel mapping of all DMX512 control values when the SL WASH 350 RGBW LED
Luminaire is operated in various Simple RGBW 8-bit DMX512 Group Control Modes.
Table 20: DMX Channel Mapping (Simple RGBW 8-Bit Group Modes)
Simple 8 BIT MODE
DMX CHANNEL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
3 Group MODE
1 Group MODE
Pan - High Byte
Pan - High Byte
Pan - Low Byte
Pan - Low Byte
Tilt - High Byte
Tilt - High Byte
Tilt - Low Byte
Tilt - Low Byte
Master Intensity
Master Intensity
Strobe
Strobe
Zoom
Zoom
C ontrol
C ontrol
Red_1
Red_1-3
Green_1
Green_1-3
Blue_1
Blue_1-3
White_1
White_1-3
Red_2
Green_2
Blue_2
White_2
Red_3
Green_3
Blue_3
White_3
Note: Refer to previous DMX mapping information for Color Presets, Strobe, Duration,
Intensity Timing, Color Timing, and Control channels.
30
DMX CONTROL
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
7. HSIC Mode
Table 21 provides DMX channel mapping of all DMX512 control values when the SL WASH 350 RGBW LED
Luminaire is in HSIC (Hue, Saturation, Intensity, and Color Correction) DMX512 mode (as set by the luminaire’s
menu system).
Table 21: DMX Channel Mapping (HSIC Mode)
DMX
Channel
Parameter
1
Pan - High
2
Pan - Low
3
Tilt - High
4
Tilt - Low
5
Master Intensity
6
Strobe
Range DMX
Range%
Default - recommended console
default values
0 - 65535
0 - 100%
32768
16-bit control for Pan operation
0 - 65535
0 - 100%
32768
16-bit control for Tilt operation
0 - 255
0 - 100%
0
8-bit control for Intensity of LED settings.
0
Controls strobe operations as follows:
Open = DMX 0 - 2
Closed = DMX 3 - 5
Slow Rand = DMX 6 - 7
Med Rand = DMX 8 - 10
Fast Rand = DMX 11 - 12
Strobe Range = DMX 13 - 127 (fastest)
Pulse + Slow Rand = DMX 128 - 129
Pulse + Med Rand = DMX 130 - 131
Pulse + Fast Rand = DMX 132 - 133
Pulse + Range = DMX 134 - 191
Pulse - Slow Rand = DMX 192 - 193
Pulse - Med Rand = DMX 194 - 195
Pulse - Fast Rand = DMX 196 - 197
Pulse - Range = DMX 198 - 255
0
Strobe Duration is 0 - 85
0 = DMX 0
1 = DMX 1 - 3
x = (DMX Value-1)/3+1
85 = DMX 253-255
Variable control of zoom from 8 to 40 degrees
0 - 255
0 - 100%
Description
7
Duration
0 - 255
0 - 100%
8
Zoom
0 - 255
0 - 100%
0
9
Focus Timing
0 - 255
0 - 100%
255
Timing control of Pan/Tilt
255
Allows for timing control of intensity, color, and
zoom parameters. Channel should default to 255
for smoothest actions using console and/or
manual fades.
10
Timing
0 - 255
0 - 100%
Control Channel functions of the SL Series
products. Set control channel value from 0 then
turn to desired action. Hold value for at least 5
seconds, then turn to 0. Set control channel
value to 0 without any scaling.
11
Control
12
Hue 1-3 - High
13
Hue 1-3 - Low
0 - 255
0 - 100%
0
Default Setting on Console = DMX 0-4
DIM Response _Normal = DMX 5 - 9
DIM Response_Incandescent = DMX 10 - 14
Dimming Curve_linear = DMX 30 - 34
Dimming Curve_Square = DMX 35- 39
Dimming Curve_S-Curve = DMX 40 - 44
Dimming Curve_PL-Curve = DMX 45 - 49
Calibration_OFF = DMX 70 - 74
Calibration_ON = DMX 75 - 79
Fan_Auto = DMX 80 - 84
Fan_Off = DMX 85 - 89
Reserved ( Future use) = DMX 90 - 250
0 - 65535
0 - 100%
0
16-bit control of Hue 0 - 359 degrees
14
Saturation 1-3
0 - 255
0 - 100%
0
8-bit control of Saturation
15
Intensity 1-3
0 - 255
0 - 100%
0
8-bit control of Intensity
16
CCT 1-3
0 - 255
0 - 100%
0
Variable control of Correlated Color Temperature
(CCT) as follows:
Channel OFF (disabled) = DMX 0 - 5
2700K - 6500K.= DMX 6 - 255
Sh wline
HSIC Mode
31
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
8. HSIC Group Modes
Table 22 provides DMX channel mapping of all DMX512 control values when the SL WASH 350 RGBW LED
Luminaire is operated in various HSIC DMX512 Group Control Modes.
Table 22: DMX Channel Mapping (HSIC Group Modes)
HSIC MODE
DMX CHANNEL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
3 Group MODE
Pan - High Byte
1 Group MODE
Pan - High Byte
Pan - Low Byte
Pan - Low Byte
Tilt - High Byte
Tilt - High Byte
Tilt - Low Byte
Tilt - Low Byte
Master Intensity
Master Intensity
Strobe
Strobe
Duration
Duration
Zoom
Zoom
Focus Timing
Focus Timing
Timing
Timing
C ontrol
C ontrol
Hue_1 - High Byte
Hue_1-3 - High Byte
Hue_1 - Low Byte
Hue_1-3 - Low Byte
Saturation_1
Saturation_1-3
Intensity_1
Intensity_1-3
C C T_1
C C T_1-3
Hue_2 - High Byte
Hue_2 - Low Byte
Saturation_2
Intensity_2
C C T_2
Hue_3 - High Byte
Hue_3 - Low Byte
Saturation_3
Intensity_3
C C T_3
Note: Refer to previous DMX mapping information for Color Presets, Strobe, Duration, Intensity
Timing, Color Timing, and Control channels.
32
DMX CONTROL
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
9. SL WASH 350 RGBW LED Luminaire DMX Timing Channel Detail
Timing channel control improves the timed moves of certain groups of parameters. The SL WASH 350 RGBW LED
Luminaire provides timing channels in 16-bit mode (one for intensity time and one for color time) and one timing
channel in 8-bit (color and intensity timing combined). The luminaire uses its timing channel value to calculate a
smooth continuous operation for a given time and transition.
Guidelines:
• Timing channels support time values from zero to 60 minutes.
• To use a timing channel instead of console timing, it is recommended to set the timing channel to the desired value
and set cue and/or console cue fade time to zero. A combination of time controls can produce unexpected results.
• The default value setting in the profile should be 255 (proportional control) to allow smooth operation when using
console timing.
• The timing channel data should change as a snap. A zero value will give the fastest operation, however, without
any smoothing this can appear "steppy" in console timed moves.
Refer to "SL WASH 350 RGBW LED Luminaire DMX Timing Channel Detail" for more information.
Table 23: SL WASH 350 RGBW LED Luminaire Timing Channel Detail
DMX
0
0
0 (Full Speed)
1
0.2
(unless noted)
2
0.4
1
3
0.6
4
0.8
2
5
1
6
1.2
7
1.4
3
8
1.6
9
1.8
4
10
2
11
2.2
12
2.4
5
13
2.6
14
2.8
6
15
3
16
3.2
17
3.4
7
18
3.6
19
3.8
8
20
4
21
4.2
22
4.4
9
23
4.6
24
4.8
10
25
5
26
5.2
11
12
Sh wline
= Seconds
% Value
27
5.4
28
5.6
29
5.8
30
6
31
6.2
SL WASH 350 RGBW LED Luminaire DMX Timing Channel Detail
33
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Table 23: SL WASH 350 RGBW LED Luminaire Timing Channel Detail
DMX
32
6.4
13
33
6.6
34
6.8
7.0
14
36
7.2
37
7.4
15
38
7.6
39
7.8
40
8
16
41
8.2
42
8.4
17
43
8.6
44
8.8
45
9
18
46
9.2
47
9.4
19
48
9.6
49
9.8
21
22
23
24
25
26
27
28
29
30
31
32
DMX CONTROL
(unless noted)
35
20
34
= Seconds
% Value
50
10
51
10.2
52
10.4
53
10.6
54
10.8
55
11
56
11.2
57
11.4
58
11.6
59
11.8
60
12
61
12.2
62
12.4
63
12.6
64
12.8
65
13
66
13.2
67
13.4
68
13.6
69
13.8
70
14
71
14.2
72
14.4
73
14.6
74
14.8
75
15
76
15.2
77
15.4
78
15.6
79
15.8
80
16
81
16.2
82
16.4
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Table 23: SL WASH 350 RGBW LED Luminaire Timing Channel Detail
% Value
33
34
35
36
37
38
39
40
= Seconds
(unless noted)
83
16.6
84
16.8
85
17
86
17.2
87
17.4
88
17.6
89
17.8
90
18
91
18.2
92
18.4
93
18.6
94
18.8
95
19
96
19.2
97
19.4
98
19.6
99
19.8
100
20
101
21
102
22
103
23
104
24
41
105
25
106
26
42
107
27
108
28
109
29
43
110
30
111
31
44
112
32
113
33
114
34
45
115
35
116
36
46
117
37
118
38
119
39
47
100
40
121
41
48
122
42
123
43
49
124
44
125
45
126
46
127
47
50
128
48
129
49
51
130
50
131
51
52
Sh wline
DMX
132
52
133
53
SL WASH 350 RGBW LED Luminaire DMX Timing Channel Detail
35
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Table 23: SL WASH 350 RGBW LED Luminaire Timing Channel Detail
DMX
134
54
53
135
55
136
56
57
54
138
58
139
59
55
140
60
141
61
142
62
56
143
63
144
64
57
145
65
146
66
147
67
58
148
68
149
69
59
150
70
151
71
152
72
153
73
154
74
155
75
61
156
76
157
77
62
158
78
159
79
160
80
63
161
81
162
82
64
163
83
164
84
165
85
65
166
86
167
87
66
168
88
169
89
170
90
67
171
91
172
92
68
173
93
174
94
69
175
95
176
96
177
97
178
98
70
179
99
180
100
71
181
101
182
102
72
DMX CONTROL
(unless noted)
137
60
36
= Seconds
% Value
183
103
184
104
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Table 23: SL WASH 350 RGBW LED Luminaire Timing Channel Detail
DMX
185
105
73
186
106
187
107
(unless noted)
188
108
74
189
109
190
110
75
191
111
192
112
193
113
76
194
114
195
115
77
196
116
197
117
198
118
78
199
119
200
100
79
201
121
202
122
203
123
80
204
124
205
125
81
206
126
207
127
82
208
128
209
129
210
130
211
131
83
212
132
213
133
84
214
134
215
135
216
136
85
217
137
218
138
86
219
139
220
140
221
141
87
222
142
223
143
88
224
144
225
145
89
226
146
227
147
228
148
229
149
90
230
150
231
151
91
232
152
233
153
92
Sh wline
= Seconds
% Value
234
154
235
155
SL WASH 350 RGBW LED Luminaire DMX Timing Channel Detail
37
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Table 23: SL WASH 350 RGBW LED Luminaire Timing Channel Detail
= Seconds
% Value
DMX
236
156
93
237
157
238
158
(unless noted)
239
159
94
240
160
241
161
95
242
162
243
163
244
164
96
245
165
246
5 Minutes
97
247
15 Minutes
248
30 Minutes
249
60 Minutes
250*
60mS
98
99
100
251*
80mS
252*
100mS
253*
100mS
254*
140mS
255*
(default)
160mS
Note: * DMX values 250 to 255 provide smoothing when using console fade timing. DMX value 255 (recommended
default) will provide the smoothest timing.
38
DMX CONTROL
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
10. SL WASH 350 RGBW LED Luminaire RDM Parameter IDs
The following tables outline and describe all the RDM parameters IDs associated with SL WASH 350 RGBW LED
Luminaires.
• Table 24, “RDM Product Parameters IDs”
• Table 25, “RDM UID”
• Table 26, “RDM Parameters IDs,” on page 40
• Table 27, “RDM Manufacturer Status IDs,” on page 41
• Table 28, “RDM Manufacturer Specific PIDs for Root Device,” on page 42
• Table 29, “SL WASH 350 RGBW LED Luminaire RDM Manufacturer Specific PIDs for Sub Device,” on page 42
Table 24: RDM Product Parameters IDs
Model ID
Manufacturer
Model Description
Product Category
0x11A0
Philips Entertain. Lighting Asia
SL WASH 350 (RGBW)
0x0509
Table 25: RDM UID
UID
MSB of ESTA
50H
Sh wline
LSB of ESTA
41H
1st of
Unique Seq.
2nd of
Unique Seq.
3rd of
Unique Seq.
4th of
Unique Seq.
SL WASH 350 RGBW LED Luminaire RDM Parameter IDs
39
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Table 26: RDM Parameters IDs
Get
Allowed
Set
Allowed
RDM Parameter IDs
Value
Comment
Implemented
Category - Network Management
■
■
■
■
DISC_UNIQUE_BRANCH
0x0001
■
DISC_MUTE
0x0002
■
DISC_UN_MUTE
0x0003
■
PROXIED_DEVICES
0x0010
PROXIED_DEVICES_COUNT
0x0011
COMMS_STATUS
0x0015
Category - Status Collection
■
QUEUED_MESSAGE
0x0020
■
■
STATUS_MESSAGES
0x0030
■
■
■
STATUS_ID_DESCRIPTION
0x0031
■
■
CLEAR_STATUS_ID
0x0032
■
■
SUB_DEVICE_STATUS_REPORT_THRESHOLD
0x0033
Category - RDM Information
■
SUPPORTED_PARAMETERS
0x0050
Support required only if
supporting Parameters
beyond the minimum required
set.
■
■
PARAMETER_DESCRIPTION
0x0051
Support required for
Manufacturer-Specific PIDs
exposed in SUPPORTED_
PARAMETERS message.
■
Category - Product Information
■
DEVICE_INFO
■
0x0060
■
PRODUCT_DETAIL_ID_LIST
0x0070
■
DEVICE_MODEL_DESCRIPTION
0x0080
■
■
MANUFACTURER_LABEL
0x0081
■
DEVICE_LABEL
0x0082
■
■
■
■
■
■
FACTORY_DEFAULTS
0x0090
LANGUAGE_CAPABILITIES
0x00A0
LANGUAGE
0x00B0
SOFTWARE_VERSION_LABEL
0x00C0
■
BOOT_SOFTWARE_VERSION_ID
0x00C1
■
BOOT_SOFTWARE_VERSION_LABEL
0x00C2
■
■
■
■
■
Category - DMX512 Setup
■
■
■
■
■
DMX_PERSONALITY
0x00E0
DMX_PERSONALITY_DESCRIPTION
0x00E1
DMX_START_ADDRESS
0x00F0
■
■
Required if device uses a
DMX Slot
■
■
SLOT_INFO
0x0120
■
■
SLOT_DESCRIPTION
0x0121
■
■
DEFAULT_SLOT_VALUE
0x0122
Category - Sensors 0x02xx
■
■
40
■
DMX CONTROL
SENSOR_DEFINITION
0x0200
■
SENSOR_VALUE
0x0201
■
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Table 26: RDM Parameters IDs
Get
Allowed
Set
Allowed
RDM Parameter IDs
Value
■
RECORD_SENSORS
0x0202
Comment
Implemented
Category - Dimmer Settings 0x03xx - FUTURE USE
Category - Power / Lamp Settings 0x04xx
■
■
■
■
DEVICE_HOURS
0x0400
■
LAMP_HOURS
0x0401
■
LAMP_STRIKES
0x0402
■
■
LAMP_STATE
0x0403
■
■
LAMP_ON_MODE
0x0404
■
■
DEVICE_POWER_CYCLES
0x0405
Category - Display Settings 0x05xx
■
■
DISPLAY_INVERT
0x0500
■
■
DISPLAY_LEVEL
0x0501
■
Category - Configuration 0x06xx
■
■
PAN_INVERT
0x0600
■
■
■
■
TILT_INVERT
0x0601
■
■
PAN_TILT_SWAP
0x0602
■
■
■
REAL_TIME_CLOCK
0x0603
Category - Control 0x10xx
■
■
IDENTIFY_DEVICE
■
RESET_DEVICE
0x1001
■
■
POWER_STATE
0x1010
■
■
PERFORM_SELFTEST
0x1020
SELF_TEST_DESCRIPTION
0x1021
■
CAPTURE_PRESET
0x1030
■
PRESET_PLAYBACK
0x1031
■
■
■
0x1000
Table 27: RDM Manufacturer Status IDs
Manufacturer Specific messages are in the range of 0x8000 - 0xFFDF. Each Manufacturer-specific Status ID shall have a
unique meaning, which shall be consistent across all products having a given Manufacturer ID. See Table B-2, ANSI E1.202010.
Status ID Message
8100H
Sh wline
Value
Data Value 1
Data Value 2
Status ID Description
00H
00H
ALL OK
SL WASH 350 RGBW LED Luminaire RDM Parameter IDs
41
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Table 28: RDM Manufacturer Specific PIDs for Root Device
Get
Allowed
Set
Allowed
RDM
Parameter IDs
Type
Length
Unit
Prefix
Min
Max
Default
Description
Category - Manufacturer Defined PIDs - Range is 0x8000-0xffdf (See ANSI E1.20-2010 Standard, Table A-3)
■
■
8A00H
U8
1
None
None
0
100
100
DIMMER
■
■
8AB2H
U8
1
None
None
1
18
1
Chase
■
■
8AB0H
U8
1
None
None
0
43
0
Color Filter
■
■
8AB1H
U8
1
None
None
0
31
0
Preset
■
■
8A92H
U8
1
None
None
0
255
0
Strobe
■
■
8A94H
U8
1
None
None
0
255
0
Duration
■
■
8A95H
U16
1
None
None
0
65535
0
Pan
■
■
8A96H
U16
1
None
None
0
65535
0
Tilt
0
Fan AUTO/OFF
Setup
■
■
8A97H
U8
1
None
None
0
1
■
■
8AC3H
U8
1
None
None
0
255
0
Pan/Tilt Timing
■
■
8AC0H
U8
1
None
None
0
255
255
Intensity Timing
■
■
8AC1H
U8
1
None
None
0
255
255
Beam Timing
■
■
8AC2H
U8
1
None
None
0
255
255
Color Timing
■
■
8A40H
U8
1
None
None
0
1
0
Link Mode
■
■
8A42H
U8
1
None
None
0
1
0
Incandescent Effect
■
■
8AA1H
U8
1
None
None
0
3
0
Dimming Curve
■
■
8A0CH
U8
1
None
None
0
3
0
DMX Fail Mode
■
■
8AA0H
U8
1
None
None
0
4
0
Backlight Off Time
■
■
8AA2H
U8
1
None
None
0
94
0
Power Up Setup
■
■
8A44H
U8
1
None
None
0
1
0
Calibration ON/OFF
Setup
■
■
8A41H
U8
1
None
None
0
1
0
Lock Fixture
Table 29: SL WASH 350 RGBW LED Luminaire RDM Manufacturer Specific PIDs for Sub Device
Get
Allowed
Set
Allowed
RDM
Parameter IDs
■
■
8A04H
U8
1
None
None
0
100
100
Dimmer RED
■
■
8A05H
U8
1
None
None
0
100
100
Dimmer GREEN
■
■
8A06H
U8
1
None
None
0
100
100
Dimmer BLUE
■
■
8A07H
U8
1
None
None
0
100
100
Dimmer WHITE
Type
Length
Unit
Prefix
Min
Max
Default
Description
Category - Manufacturer Defined PIDs - Range is 0x8000-0xffdf (See ANSI E1.20-2010 Standard, Table A-3)
42
DMX CONTROL
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
CLEANING AND CARE
WARNING! All cleaning should be performed with power completely removed from the luminaire. Never remove
protective covers when luminaire is powered. Wear appropriate protective eye wear and gloves when cleaning the
fixture. All service and maintenance, other than described herein, should be performed by a qualified technician or
Authorized Service Center.
1. Special Cleaning and Care Instructions
Being a solid-state fixture, and unlike most fixtures, the SL WASH 350 RGBW LED Luminaire requires very little
routine maintenance by the user. This section covers portions of the luminaire that can be removed for cleaning.
The SL WASH 350 RGBW LED Luminaire special care when it comes to cleaning front lens assembly. Additional
care needs to be taken with the plastic components because they are much easier to scratch or damage than glass.
The following is a list of cleaning materials required to care for your SL WASH 350 RGBW LED Luminaire:
• Lint free lens tissue
• Lint or powder free gloves
• Reagent grade isopropyl alcohol*
• A mild soap solution.
Note: *Reagent grade isopropyl alcohol is good to use on the SL WASH 350 RGBW LED Luminaire plastic optics
with anti-reflection coatings.
If the lens is still dirty after using isopropyl alcohol, for instance if fingerprints or oil is just redistributed and not
cleaned off the optic, then a mild soap and water solution can be used to gently wash the lens. Repeat the cleaning
with isopropyl alcohol to eliminate streaks and soap residue.
WARNING! Under no circumstances should ammonia-based cleaners, acetone, or other harsh solvents be used on or
near the SL WASH 350 RGBW LED Luminaire. These types of cleaners or solvents can permanently damage the
optics or housings of the fixture.
If you have any questions regarding the use or care of your SL WASH 350 RGBW LED Luminaire, please contact
Showline technical support or your local Authorized Dealer.
2. Front Lens Cleaning
To clean the front lens:
Step 1. Disconnect luminaire from power and allow to cool completely.
Step 2. Apply a small amount of reagent grade isopropyl alcohol to lint-free lens tissue.
Step 3. Wipe all debris, dirt, fingerprints, etc. from lens.
Step 4. Using a second lint-free lens tissue, wipe off any alcohol residue.
3. Service and Maintenance
For all other service and maintenance issues, please contact your local Showline office or an Authorized Service
Center.
WARNING! Disassembly (other than as described herein), alterations, unauthorized service, etc. will void the
product warranty. Contact your local Showline office or an Authorized Service Center for technical support and
service.
Sh wline
Special Cleaning and Care Instructions
43
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
TECHNICAL SPECIFICATIONS
1. SL WASH 350 RGBW LED Luminaire Operational Specifications
Source:
Beam Angle:
Light Output:
Color Temperature:
Input Voltage (AC):
Current (AC):
Frequency:
Control Protocols:
Ambient Temperature:
Humidity:
Cooling:
Weight:
Housing:
Compliance:
IP Rating:
RGBW LED Array (19)
8 to 40 Degrees
> 5,800 lumens / CRI/CQS: > 90 (RGBW)
2700 - 10000K (user adjustable)
100V to 240V (+/- 10%, auto-ranging)
3.6 Amps (100V) / 1.5 Amps (240V)
50/60Hz
DMX512 (1990) / DMX512A (RDM) / On-Board Menu
-20 to 40 Degrees C (-4 to 104 Degrees F)
5%-95% Non condensing
Forced Air Cooling
34.4 lbs (15.6 kg) - Luminaire only (no accessories)
Die Cast Aluminium with Powder Coating
ETL Listed, CE and C-Tick Marked
IP20
Note: Common model specifications shown. For specific model specifications, features, and accessories, refer to the
product specification sheet for more details.
2. SL WASH 350 RGBW LED Luminaire Dimensions
231.0 mm / 9.1 in.
126.0 mm / 4.96 in.
93.0 mm /
3.7 in.
421.0 mm / 16.6 in.
226.0 mm /
8.9 in.
394.0 mm / 15.5 in.
470.8 mm / 18.5 in.
Snoot
(detachable)
Side View
(on base - LCD side)
Side View
(on base - handle side)
157.0 mm /
6.2 in.
337.0 mm / 13.3 in.
106.0 mm /
4.2 in.
309.0 mm / 12.2 in.
Camlock (x4)
Top View
44
TECHNICAL SPECIFICATIONS
Bottom View
(bottom of base)
Sh wline
SL WASH 350 RGBW LED Luminaire
Installation & User’s Manual
Notes
Sh wline
SL WASH 350 RGBW LED Luminaire Dimensions
45