INSTRUMENTS
INSTRUMENTS
INSTRUMENT SETS - FLAGSHIP PLUS BLACK FACE FAMILY
Visit the Flagship Plus Black Face Family Gauges section for individual details. All tachometers and speedometers fit a standard 3‑3/8 in. (85 mm)
diameter hole. All other gauges fit a 2‑1/8 in. (54 mm) diameter hole.
INSTRUMENTS
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
409
INSTRUMENTS
INSTRUMENT SETS - FLAGSHIP PLUS WHITE FACE FAMILY
INSTRUMENTS
Visit the Flagship Plus White Face Family Gauges section for individual details. All tachometers and speedometers fit a standard 3‑3/8 in. (85 mm)
diameter hole. All other gauges fit a 2‑1/8 in. (54 mm) diameter hole.
410
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
ANALOG GAUGE INTERFACE - DIGITAL ENGINES
PITOT SENSOR KIT
Converts digital signal to analog
8M0059530
Components needed to add pitot for speedometer gauges
150 4 Stroke Engines
ANALOG GAUGE INTERFACE KIT
WARER PRESSURE KIT
8M0059531
Components needed to water pressure gauges
150 4 Stroke Engines
ANALOG WATER PRESSURE FITTING KIT
32-8M0063663
Fitting kit to install analog gauge to engine.
150 HP 4 Stroke
892486K08
This kit allows the conversion of a digital signal to an analog signal. (Verado
engines are on digital platform and this kit must use with analog gauge
installations)
2005 and newer 135‑350 Verado
MONITOR PANELS FOR DIESELS
PRIMARY STATION MONITOR PANEL
INSTRUMENTS
HOSE KIT
806385T
Warning lights are provided for low oil pressure, excessive coolant temperature,
insufficient alternator output and glow plug activation.
Fits 1.7L MS & MI 120 and 4.2 MS & MI (200 & 230)
32-892156A01
Contains the necessary tubing, tee fitting and instruction sheet to allow the use of a
15 PSI Analog Water Pressure Gauge with the otherwise digital 1.5L OptiMax
outboard.
Fits the 75/90/115hp (1.5L) OptiMax Outboard Engine, Model Year 2004 and
newer.
PRIMARY STATION MONITOR PANEL
CONVERSION KIT - SMARTCRAFT SENSORS
861014
Warning lights are provided for low oil pressure, excessive coolant temperature,
insufficient alternator output, glow plug activation & check engine light.
Fits 1997 and newer 2.8 ES & EI 165 and 4.2 ES & EI (250 & 230)
889250K01
New kit that allows you to use SmartCraft gauges on these engines
Gen II (2007) 75 HP ‑ 115 HP 4 stroke engines and newer engines
TRIM SENSOR CONVERTER KIT
8M0059529
This kit will allow you to convert the signal from the digital sensor to an analog
signal. It will allow you to drive an analog gauge for trim only without changing the
sensor to an analog sensor. This kit will connect directly to the harness inside the
emgine cowl.
150 HP 4 Stroke engine only
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
411
INSTRUMENTS
SECOND STATION MONITOR PANEL
SECOND STATION MONITOR PANEL
806386
This panel is virtually identical to primary station monitor panel, except it has
locations for toggle switches for starting and stopping instead of a key switch.
Fits 1.7 MS & MI 120 and 4.2 MS & MI (200 & 230)
861428
This panel is virtually identical to primary station panel, except it has locations for
toggle switches for starting and stopping instead of a key switch.
Fits 1997 and newer 2.8 ES & EI 165 and 4.2 ES & EI (250 & 300)
TACHOMETER SELECTION AND SETTINGS CHARTS
INSTRUMENTS
Tachometer Application
Model
Description
Flagship (Black Face)
Flagship (White Face) Generic
MerCruiser MCM/MIE Gasoline Engines
6000 RPM
79-895283A03
79-895283A23
8000 RPM
79-895283A06
79-859675A11
N/A
MerCruiser D1.7L DTI, D2.8L & D4.2L D-tronic
ALL
79-895283A03
79-895283A23
N/A
N/A
N/A
MerCruiser D3.0, D3.6L & D4.2L
1994 and Newer
79-859673A 1
N/A
MerCruiser D7.3L D-Tronic
1997 and Newer
79-859673A 1
N/A
N/A
Mercury/Mariner 4-Stroke Outboards
6000 RPM
79-895283A03
79-895283A23
N/A
8000 RPM
79-895283A06
79-859675A11
N/A
Mercury/Mariner 20 HP and Above (2 cycle)
6000 RPM
79-895283A03
79-895283A23
N/A
8000 RPM
79-895283A06
79-859675A11
N/A
6000 RPM(1)
79-895283A03
79-895283A23
N/A
8000 RPM(1)
79-895283A06
79-859675A11
N/A
Mariner 8-40 HP (Japanese import)
Manual start w/ lighting coil
N/A
N/A
N/A
Mariner 9.9-60 HP (Japanese import)
Electric start / 2 cylinder
N/A
N/A
N/A
Mercury/Mariner Optimax
Force 3
50cc
N/A
N/A
79-817030A 1
Force 40 HP and Above
6000 RPM
79-895283A03
79-895283A23
N/A
8000 RPM
79-895283A06
79-859675A11
N/A
(1) Correct harness required for optimum performance
Tachometer Settings
Model
Positive Pulses Per Crank Revolution
Poles Flagship (Force 79-817030A 1) Tachometer Switch Setting
Mercury/Mariner (2-stroke) 6 thru 25 HP (U.S. Orig
Country Serial # Range
4
8
4P
N/A
Mercury/Mariner (4-stroke) 8 and 9.9 HP
3
6
3P
N/A
Mercury/Mariner (2-stroke) 30/40 HP
USA
0G053314 and up
6
12
6P
N/A
Mercury/Mariner 35 and 40 HP (2 Cyl.)
USA
5823918 and up
4
8
4P
N/A
BEL
9298955 and up
4
8
4P
N/A
AUS
8070639 and up
4
8
4P
N/A
CAN
7169337 and up
4
8
4P
N/A
Mercury/Mariner (4-stroke) 25 thru 90 HP
6
12
6P
N/A
Mercury/Mariner (2-stroke) 45 thru V-6 (U.S. Origi
6
12
6P
N/A
Force 35
-
20
N/A
1
Force 35 HP and higher with Mercury ignition
6
12
6P
2
MerCruiser 4 cyl. gasoline engine
2
N/A
4C
N/A
MerCruiser 6 cyl. gasoline engine
3
N/A
6C
N/A
MerCruiser 8 cyl. gasoline engine
4
N/A
8C
N/A
412
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
FLAGSHIP PLUS BLACK FACE FAMILY
FLAGSHIPTACHOMETER KIT
Large gauge ‑ fits 3‑3/8 in.(86 mm) hole in dash. Small gauge ‑ fits
2‑1/8 in.(54 mm) hole in dash. 12 volt system. Tachometer selection
and settings charts are located following the color group images.
FLAGSHIP INSTRUMENT SET
79-895283A05
Anti‑fog lens. 0‑7000 RPM. 270 degree dial sweep. Black face and Black bezel:
Blue graduations. Outboards require a tachometer harness or ignition/choke
assembly for connection. Fits 3‑3/8 in. (85 mm) hole in dash.
For various Mercury Outboards and MCM products. Will require AGI converter
with Verado (Digital) engines
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIPTACHOMETER KIT
INSTRUMENTS
79-895283A01
Anti‑fog lens. Black face and black bezel; blue graduations. Set includes 0‑6000
RPM tachometer, oil pressure gauge, battery meter and water temperature gauge.
All illuminated. Mounting hardware also included.
For sterndrives and inboards only with 12 volt system.
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIPTACHOMETER KIT
79-895283A06
Anti‑fog lens. 0‑8000 RPM. 270 degree dial sweep. Black face and Black bezel:
Blue graduations. Outboards require a tachometer harness or ignition/choke
assembly for connection. Fits 3‑3/8 in. (85 mm) hole in dash.
for various Mercury Outboards and MCM products. Will require AGI converter with
Verado (Digital) engines
79-895283A02
Anti‑fog lens. 0‑5000 RPM. 270 degree dial sweep. Black face and Black bezel:
Blue graduations. Outboards require a tachometer harness or ignition/choke
assembly for connection. Fits 3‑3/8 in. (85 mm) hole in dash.
Diesel Engines only
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP SPEEDOMETER
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIPTACHOMETER KIT
79-895285A01
Anti‑fog lens. 10‑45 MPH. 270 degree dial sweep. Black face and Black bezel;
White/Blue graduations. Includes 20 ft.(6.1 m) of tubing. Fits 3‑3/8 in. (86 mm) hole
in dash.
Mercury Branded, Box Point of Sale Packaged.
79-895283A03
Anti‑fog lens. 0‑6000 RPM. 270 degree dial sweep. Black face and Black bezel:
Blue graduations. Outboards require a tachometer harness or ignition/choke
assembly for connection. Fits 3‑3/8 in. (85 mm) hole in dash.
For various Mercury Outboard and MCM products. Will require AGI converter for
Verado (Digital) engines
Mercury Branded, Box Point of Sale Packaged.
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
413
INSTRUMENTS
FLAGSHIP SPEEDOMETER
79-895285A03
Anti‑fog lens. 10‑65 MPH. 270 degree dial sweep. Black face and Black bezel;
White/Blue graduations. Includes 20 ft.(6.1 m) of tubing. Fits 3‑3/8 in. (85 mm) hole
in dash.
79-895285A08
Anti‑fog lens. 10‑ 50 knots. 270 degree dial sweep. Black face and Black bezel;
White/Blue graduations. Includes 20 ft.(6.1 m) of tubing. Fits 3‑3/8 in. (85 mm) hole
in dash.
Mercury Branded, Box Point of Sale Packaged.
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP SPEEDOMETER
DIGITAL DEPTH GAUGE KIT
79-895285A04
Anti‑fog lens. 10‑80 MPH. 270 degree dial sweep. Black face and Black bezel;
White/Blue graduations. Includes 20 ft.(6.1 m) of tubing. Fits 3‑3/8 in. (85 mm) hole
in dash.
79-879292A01
Black face and black bezel. Digital depth readout to 199 feet, display is backlit for
night operation. Easy addition to any boat. Fits in a cutout for standard 2 in.(51
mm) gauge. Kit includes adjustable alarm, transom‑mounted/inside‑hull‑mounted
transducer. Easy to follow instructions. The affordable way to add more fun and
safety to boating.
Available in Multiple bezel colors
INSTRUMENTS
FLAGSHIP SPEEDOMETER
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP SPEEDOMETER
Mercury Branded, Box Point of Sale Packaged.
BEZEL 52 MM
79-895285A06
Anti‑fog lens. 10‑100 MPH. 270 degree dial sweep. Black face and Black bezel;
White/Blue graduations. Includes 20 ft.(6.1 m) of tubing. Fits 3‑3/8 in. (85 mm) hole
in dash.
Mercury Branded, Box Point of Sale Packaged.
414
879292001
Bezel‑Gold 2 inch (52 MM) Bezel is a twist fit that has a round shape. Used on
Depth Sounders only
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
BEZEL 52 MM
FLAGSHIP WATER TEMPERATURE GAUGE
879292002
Bezel‑Chrome 2 inch (52 MM) Bezel is a twist fit that has a round shape. Used
on Depth Sounders only
79-895287A02
Anti‑fog lens. 60 deg.‑200 deg.F gauge. Black face and Black bezel; White/Blue
graduations.
Fits Mercury/Mariner 25 thru 115 FourStroke, 225 FourStroke, 40 (3 & 4 cyl.), 45,
50/60 (3 cyl.), and 70 to 125 hp ; and 1993 and newer Force outboards (Force
models must order sender FA299791) Sender need to be ordered seperately
FLAGSHIP VOLT METER
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP WATER TEMPERATURE GAUGE
INSTRUMENTS
79-895286A01
Anti‑fog lens. Black face and Black bezel; White/Blue graduations.
Outboards require a tachometer harness or ignition/choke assembly for
connection.
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP WATER TEMPERATURE GAUGE
79-895287A03
Anti‑fog lens. 100 deg.‑240 deg.F gauge. Black face and Black bezel; White/Blue
graduations.
Diesel
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP WATER PRESSURE GAUGE
79-895287A01
Anti‑fog lens. 120 deg.‑240 deg.F gauge. Black face and Black bezel; White/Blue
graduations.
Fits all MCM/MIE gasoline engines and Mercury/Mariner V‑6 outboards. Sender, if
not already installed on the outboard, must be purchased separately.
Mercury Branded, Box Point of Sale Packaged.
79-895288A01
Anti‑fog lens. 1 to 15 psi gauge with quick‑connect terminals for connection to light.
Black face and bezel; blue graduations. Complete kit. Includes 25 ft.(7.6 m) of
tubing and hardware.
Replacement hose not sold separate, obtain locally.
Fits Mercury/Mariner 25 E and EL (U.S. S/N 0C192155 and above; Belgium S/N
9548742 and above), 30 to 125 (except four stroke models), 1998 and older V‑6
(3.0L), and Force 40/50.
Mercury Branded, Box Point of Sale Packaged.
79-895288A02
Anti‑fog lens. 1 to 15 psi gauge with quick‑connect terminals for connection to light.
Black face and bezel; blue graduations. Replacement gauge only
Fits Mercury/Mariner 25 E and EL (U.S. S/N 0C192155 and above; Belgium S/N
9548742 and above), 30 to 125 (except four stroke models), 1998 and older V‑6
(3.0L), and Force 40/50.
Mercury Branded, Box Point of Sale Packaged.
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
415
INSTRUMENTS
FLAGSHIP WATER PRESSURE GAUGE
FLAGSHIP WATER PRESSURE GAUGE
79-895288A03
Anti‑fog lens. 2 to 30 psi gauge with quick‑connect terminals for connection to light.
Black face and Black bezel with Blue/White graduations. Complete kit. Includes 25
ft.(7.6 m) of tubing and hardware.
Replacement hose not sold separate, obtain locally.
Fits Mercury/Mariner 25/30/40/45/50/75/90/115/225 (4‑stroke), all V‑6 (except 3.0L
1998 and older) ; and Force 75, 90 and 120. The 75/90/115/225 FourStroke
outboards require a reducer fitting p/n 22‑86306.
79-895288A06
Anti‑fog lens. 2 to 40 psi gauge with quick‑connect terminals for connection to light.
Black face and bezel; blue graduations.. Replacement gauge only.
Fits 75‑115 hp EFI FourStroke Outboards, serial number 1B366823 & above.
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP OIL PRESSURE GAUGE
INSTRUMENTS
Mercury Branded, Box Point of Sale Packaged.
79-895288A04
Anti‑fog lens. 2 to 30 psi gauge with quick‑connect terminals for connection to light.
Black face and Black bezel with Blue/White graduations. Replacement Gauge
only
Fits Mercury/Mariner 25/30/40/45/50/75/90/115/225 (4‑stroke), all V‑6 (except 3.0L
1998 and older) ; and Force 75, 90 and 120. The 75/90/115/225 FourStroke
outboards require a reducer fitting p/n 22‑86306.
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP WATER PRESSURE GAUGE
79-895289A01
Anti‑fog lens. Black face and Black bezel; Blue/White graduations.
Fits all MCM/MIE gasoline engines and Mercury/Mariner 25/30/40/45/50/225
(4‑stroke) outboards. Sender, if not already installed on the outboard, must be
purchased separately.
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP OIL PRESSURE GAUGE
79-895288A05
Anti‑fog lens. 2 to 40 psi gauge with quick‑connect terminals for connection to light.
Black face and bezel; blue graduations. Complete kit. Includes 25 ft.(7.6 m) of
tubing and hardware.
Replacement hose not sold separate, obtain locally.
Fits 75‑115 hp EFI FourStroke Outboards, serial number 1B366823 & above.
Mercury Branded, Box Point of Sale Packaged.
LAGREE FITTING FOR 2-40 PSI- WATER PRESSURE
79-895289A02
Anti‑fog lens. Black face and Black bezel; Blue / White graduations.
Fits D3.0L, D3.6L, and 4.2L diesels (1994 & newer) and D2.8, D4.2L, and D7.3L
ES & EI models (1997 & newer).
Mercury Branded, Box Point of Sale Packaged.
22-896094A01
Fitting that connects to block to hook up Water pressure gauge. This fitting is
included in the 40 psi gauge "kit".
Fits 75‑115 hp EFI FourStroke outboards, serial number 1B366823 & above.
416
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
FLAGSHIP OIL LEVEL GAUGE KIT
FLAGSHIP POWER TRIM GAUGE
79-895290A01
Anti‑fog lens. Black face and Black bezel; Blue/White graduations.
Fits V‑6 outboard 3 US gal.(11.34 L) and 1.8 US gal.(6.8 L) remote oil reservoirs.
79-895292A01
Anti‑fog lens. Black face and bezel; blue graduations. Designed for models that
have a sender already installed or installation of a sender kit purchased separately.
Fits Sterndrive and Outboards
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP FUEL GAUGE
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP DUAL ENGINE SYNCHRONIZER
INSTRUMENTS
79-895291A01
Anti‑fog lens. Black face and Blue bezel; black graduations. 12 volt system and
240 ohm sender required.
Mercury Branded, Box Point of Sale Packaged.
FUEL GAUGE SENDING UNIT
79-895294A01
Anti‑fog lens. Black face and Black bezel; Blue/White graduations. Connects to
tachometers.
Fits both 2‑stroke and 4‑stroke gasoline engine applications.
Mercury Branded, Box Point of Sale Packaged.
SYNCHRONIZEER DRIVER - GAUGES
851052Q
Designed for tanks that have a 5 screw flange. Use with 12 volt system. 33‑240
ohm. Adjusts from 4 in.(10.2 cm) to 24 in.(60.7 cm)
Quicksilver Branded, Clamshell Package Point of Sale Packaged.
8M0053532
This product is used with the analog gauge to synchronize multilpe engines.
Any Admiral,Flagship or International II gauges
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
417
INSTRUMENTS
FLAGSHIP CRUISELOG GAUGE
FLAGSHIPTACHOMETER KIT
79-895295A01
Anti‑fog lens. Black face and Black bezel; blue graduations. No illumination. Wiring
included with this single pack.
79-895283A22
Anti‑fog lens. 0‑5000 RPM. 270 degree dial sweep. White face and White bezel:
Black graduations. Outboards require a tachometer harness or ignition/choke
assembly for connection. Fits 3‑3/8 in. (85 mm) hole in dash.
Diesel Engines only
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP CLOCK
Mercury Branded, Box Point of Sale Packaged.
INSTRUMENTS
FLAGSHIPTACHOMETER KIT
79-895297A01
Anti‑fog lens. Black face and Black bezel; black graduations. Wiring is not
included.
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP PLUS WHITE FACE FAMILY
Large gauge ‑ fits 3‑3/8 in.(86 mm) hole in dash. Small gauge ‑ fits
2‑1/8 in.(54 mm) hole in dash. 12 volt system. Tachometer selection
and settings charts are located following the color group images.
79-895283A23
Anti‑fog lens. 0‑6000 RPM. 270 degree dial sweep. White face and White bezel:
Black graduations. Outboards require a tachometer harness or ignition/choke
assembly for connection. Fits 3‑3/8 in. (85 mm) hole in dash.
For various Mercury Outboards and MCM produts. Will require the use of AGI
converter for Verado (Digital) engines
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIPTACHOMETER KIT
FLAGSHIP INSTRUMENT SET
79-895283A21
Anti‑fog lens. White face and white bezel; black graduations. Set includes 0‑6000
RPM tachometer, oil pressure gauge, battery meter and water temperature gauge.
All illuminated. Mounting hardware also included.
For various Mercury Outbord and MCM products. Will require an AGI converter for
Verado (Ditgital) engines.
79-895283A25
Anti‑fog lens. 0‑7000 RPM. 270 degree dial sweep. White face and White bezel:
Black graduations. Outboards require a tachometer harness or ignition/choke
assembly for connection. Fits 3‑3/8 in. (85 mm) hole in dash.
For various Mercury Outboards and MCM product. Will require use of AGI
converter for Verado (Digital) engines
Mercury Branded, Box Point of Sale Packaged.
Mercury Branded, Box Point of Sale Packaged.
418
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
FLAGSHIPTACHOMETER KIT
FLAGSHIP SPEEDOMETER
79-895283A26
Anti‑fog lens. 0‑8000 RPM. 270 degree dial sweep. White face and White bezel:
Black graduations. Outboards require a tachometer harness or ignition/choke
assembly for connection. Fits 3‑3/8 in. (85 mm) hole in dash.
For various Mercury Outboards and MCM products. Will require the use of an AGI
converter with Verado (Digital) engiens.
79-895285A24
Anti‑fog lens. 0‑80 MPH. 270 degree dial sweep. White face and White bezel;
Black graduations. Includes 20 ft.(6.1 m) of tubing. Fits 3‑3/8 in. (85 mm) hole in
dash.
Mercury Branded, Box Point of Sale Packaged.
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP SPEEDOMETER
FLAGSHIP SPEEDOMETER
INSTRUMENTS
79-895285A21
Anti‑fog lens. 10‑45 MPH. 270 degree dial sweep. White face and White bezel;
Black graduations. Includes 20 ft.(6.1 m) of tubing. Fits 3‑3/8 in. (85 mm) hole in
dash.
Mercury Branded, Box Point of Sale Packaged.
79-895285A26
Anti‑fog lens. 0‑100 MPH. 270 degree dial sweep. White face and White bezel;
Black graduations. Includes 20 ft.(6.1 m) of tubing. Fits 3‑3/8 in. (85 mm) hole in
dash.
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP SPEEDOMETER
FLAGSHIP SPEEDOMETER
79-895285A23
Anti‑fog lens. 10‑65 MPH. 270 degree dial sweep. White face and White bezel;
Black graduations. Includes 20 ft.(6.1 m) of tubing. Fits 3‑3/8 in. (85 mm) hole in
dash.
79-895285A28
Anti‑fog lens. 10‑50 Knots. 270 degree dial sweep. White face and White bezel;
Black graduations. Includes 20 ft.(6.1 m) of tubing. Fits 3‑3/8 in. (85 mm) hole in
dash.
Mercury Branded, Box Point of Sale Packaged.
Mercury Branded, Box Point of Sale Packaged.
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
419
INSTRUMENTS
DIGITAL DEPTH GAUGE KIT
FLAGSHIP VOLT METER
79-879292A02
White face and white bezel. Digital depth readout to 199 feet, display is backlit for
night operation. Easy addition to any boat. Fits in a cutout for standard 2 in.(51
mm) gauge. Kit includes adjustable alarm, transom‑mounted/inside‑hull‑mounted
transducer. Easy to follow instructions. The affordable way to add more fun and
safety to boating.
Available in multiple bezel colors
79-895286A21
Anti‑fog lens. White face and White bezel; black graduations.
Outboards require a tachometer harness or ignition/choke assembly for
connection.
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP WATER TEMPERATURE GAUGE
Mercury Branded, Box Point of Sale Packaged.
INSTRUMENTS
BEZEL 52 MM
879292001
Bezel‑Gold 2 inch (52 MM) Bezel is a twist fit that has a round shape. Used on
Depth Sounders only
79-895287A21
Anti‑fog lens. 100 deg.‑240 deg.F gauge. White face and White bezel; Black
graduations.
Fits all MCM/MIE gasoline engines and Mercury/Mariner V‑6 outboards. Sender, if
not already installed on the outboard, must be purchased separately.
Mercury Branded, Box Point of Sale Packaged.
BEZEL 52 MM
FLAGSHIP WATER TEMPERATURE GAUGE
879292002
Bezel‑Chrome 2 inch (52 MM) Bezel is a twist fit that has a round shape. Used
on Depth Sounders only
79-895287A22
Anti‑fog lens. 60 deg.‑200 deg.F gauge. White face and White bezel; Black
graduations.
Fits Mercury/Mariner 25 thru 115 FourStroke, 225 FourStroke, 40 (3 & 4 cyl.), 45,
50/60 (3 cyl.), and 70 to 125 hp ; and 1993 and newer Force outboards (Force
models must order sender FA299791) Senders must be ordered seperately
Mercury Branded, Box Point of Sale Packaged.
420
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
FLAGSHIP WATER TEMPERATURE GAUGE
79-895288A24
Anti‑fog lens. 2 to 30 psi gauge with quick‑connect terminals for connection to light.
White face and White bezel; Black graduations. Replacement gauge only
Fits Mercury/Mariner 25/30/40/45/50/75/90/115/225 (4‑stroke), all V‑6 (except 3.0L
1998 and older) ; and Force 75, 90 and 120. The 75/90/115/225 FourStroke
outboards require a reducer fitting p/n 22‑86306.
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP WATER PRESSURE GAUGE
79-895287A23
Anti‑fog lens. 100 deg.‑240 deg.F gauge. White face and White bezel; Black
graduations.
Diesel
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP WATER PRESSURE GAUGE
Mercury Branded, Box Point of Sale Packaged.
LAGREE FITTING FOR 2-40 PSI- WATER PRESSURE
79-895288A21
Anti‑fog lens. 1 to 15 psi gauge with quick‑connect terminals for connection to light.
White face and bezel; black graduations. Complete kit. Includes 25 ft.(7.6 m) of
tubing and hardware.
Replacement hose not sold separate, obtain locally.
Fits Mercury/Mariner 25 E and EL (U.S. S/N 0C192155 and above; Belgium S/N
9548742 and above), 30 to 125 (except four stroke models), 1998 and older V‑6
(3.0L), and Force 40/50.
Mercury Branded, Box Point of Sale Packaged.
79-895288A22
Anti‑fog lens. 1 to 15 psi gauge with quick‑connect terminals for connection to light.
White face and bezel; Black graduations. Replacement gauge only
Fits Mercury/Mariner 25 E and EL (U.S. S/N 0C192155 and above; Belgium S/N
9548742 and above), 30 to 125 (except four stroke models), 1998 and older V‑6
(3.0L), and Force 40/50.
22-896094A01
Fitting that connects to block to hook up Water pressure gauge. This fitting is
included in the 40 psi gauge "kit".
Fits 75‑115 hp EFI FourStroke outboards, serial number 1B366823 & above.
FLAGSHIP WATER PRESSURE GAUGE
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP WATER PRESSURE GAUGE
79-895288A23
Anti‑fog lens. 2 to 30 psi gauge with quick‑connect terminals for connection to light.
White face and bezel; black graduations. Complete kit. Includes 25 ft.(7.6 m) of
tubing and hardware.
Replacement hose not sold separate, obtain locally.
Fits Mercury/Mariner 25/30/40/45/50/75/90/115/225 (4‑stroke), all V‑6 (except 3.0L
1998 and older) ; and Force 75, 90 and 120. The 75/90/115/225 FourStroke
outboards require a reducer fitting p/n 22‑86306.
79-895288A26
Anti‑fog lens. 2 to 40 psi gauge with quick‑connect terminals for connection to light.
White face and White bezel; Black graduations. Replacement gauge only
Fits 75‑115 hp EFI FourStroke Outboards, serial number 1B366823 & above.
Mercury Branded, Box Point of Sale Packaged.
Mercury Branded, Box Point of Sale Packaged.
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
421
INSTRUMENTS
79-895288A25
Anti‑fog lens. 2 to 40 psi gauge with quick‑connect terminals for connection to light.
White face and bezel; black graduations. Complete kit. Includes 25 ft.(7.6 m) of
tubing and hardware.
Replacement hose not sold separate, obtain locally.
Fits 75‑115 hp EFI FourStroke Outboards, serial number 1B366823 & above.
INSTRUMENTS
FLAGSHIP OIL PRESSURE GAUGE
FLAGSHIP FUEL GAUGE
79-895289A21
Anti‑fog lens. White face and White bezel; black graduations.
Fits all MCM/MIE gasoline engines and Mercury/Mariner 25/30/40/45/50/225
(4‑stroke) outboards. Sender, if not already installed on the outboard, must be
purchased separately.
79-895291A21
Anti‑fog lens. White face and White bezel; black graduations. 12 volt system and
240 ohm sender required.
Mercury Branded, Box Point of Sale Packaged.
Mercury Branded, Box Point of Sale Packaged.
FUEL GAUGE SENDING UNIT
INSTRUMENTS
FLAGSHIP OIL PRESSURE GAUGE
79-895289A22
Anti‑fog lens. White face and White bezel; black graduations.
Fits D3.0L, D3.6L, and 4.2L diesels (1994 & newer) and D2.8, D4.2L, and D7.3L
ES & EI models (1997 & newer).
851052Q
Designed for tanks that have a 5 screw flange. Use with 12 volt system. 33‑240
ohm. Adjusts from 4 in.(10.2 cm) to 24 in.(60.7 cm)
Quicksilver Branded, Clamshell Package Point of Sale Packaged.
FLAGSHIP POWER TRIM GAUGE
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP OIL LEVEL GAUGE KIT
79-895290A21
Anti‑fog lens. White face and White bezel; black graduations.
Fits V‑6 outboard 3 US gal.(11.34 L) and 1.8 US gal.(6.8 L) remote oil reservoirs.
79-895292A21
Anti‑fog lens. White face and bezel; black graduations. Designed for models that
have a sender already installed or installation of a sender kit purchased separately.
Fits Sterndrives and Outboards
Mercury Branded, Box Point of Sale Packaged.
Mercury Branded, Box Point of Sale Packaged.
422
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
FLAGSHIP DUAL ENGINE SYNCHRONIZER
INTERNATIONAL II FAMILY GAUGES
Large gauge ‑ fits 3‑3/8 in.(86 mm) hole in dash. Small gauge ‑ fits
2‑1/8 in.(54 mm) hole in dash. 12 volt system. Tachometer selection
and settings charts are located following the color group images.
INTERNATIONAL II SPEEDOMETER
79-895294A21
Anti‑fog lens. White face and White bezel; black graduations. Connects to
tachometers.
Fits both 2‑stroke and 4‑stroke gasoline engine applications.
Mercury Branded, Box Point of Sale Packaged.
SYNCHRONIZEER DRIVER - GAUGES
Quicksilver Branded, Box Point of Sale Packaged.
79-895285Q43
Anti‑fog lens. 10‑65 MPH . 270 degree dial sweep. Black face and blackbezel;
orange/white graduations. Includes 20 ft.(6.1 m) of tubing. Fits 3‑3/8 in. (85 mm)
hole in dash.
Quicksilver Branded, Box Point of Sale Packaged.
8M0053532
This product is used with the analog gauge to synchronize multilpe engines.
Any Admiral,Flagship or International II gauges
INTERNATIONAL II SPEEDOMETER
FLAGSHIP CRUISELOG GAUGE
79-895285Q44
Anti‑fog lens. 10‑80 MPH . 270 degree dial sweep. Black face and black bezel;
orange/white graduations. Includes 20 ft.(6.1 m) of tubing. Fits 3‑3/8 in. (85 mm)
hole in dash.
79-895295A21
Anti‑fog lens. White face and White bezel; black graduations. No illumination.
Wiring included with this single pack.
Quicksilver Branded, Box Point of Sale Packaged.
INTERNATIONAL II SPEEDOMETER
Mercury Branded, Box Point of Sale Packaged.
FLAGSHIP CLOCK
79-895285Q48
Anti‑fog lens. 10‑50 Knots . 270 degree dial sweep. Black face and black bezel;
orange/white graduations. Includes 20 ft.(6.1 m) of tubing. Fits 3‑3/8 in. (85 mm)
hole in dash.
79-895297A21
Anti‑fog lens. White face and White bezel; black graduations. Wiring is not
included.
Quicksilver Branded, Box Point of Sale Packaged.
Mercury Branded, Box Point of Sale Packaged.
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
423
INSTRUMENTS
79-895285Q41
Anti‑fog lens. 10‑45 MPH . 270 degree dial sweep. Black face and black bezel;
orange/white graduations. Includes 20 ft.(6.1 m) of tubing. Fits 3‑3/8 in. (85 mm)
hole in dash.
INSTRUMENTS
INTERNATIONAL II WATER TEMPERATURE GAUGE
79-895288Q44
Anti‑fog lens. 2 to 30 psi gauge with quick‑connect terminals for connection to light.
Black face and Black bezel; Orange graduations. Service replacement gauge.
Fits Mercury/Mariner 25/30/40/45/50/75/90/115/225 (4‑stroke), all V‑6 (except 3.0L
1998 and older) ; and Force 75, 90 and 120. The 75/90/115/225 FourStroke
outboards require a reducer fitting p/n 22‑86306.
Quicksilver Branded, Box Point of Sale Packaged.
INTERNATIONAL II WATER PRESSURE GAUGE
79-895287Q41
Anti‑fog lens. 100 deg.‑240 deg.F gauge. Black face and Black bezel; Orange/
White graduations.
Fits all MCM/MIE gasoline engines and Mercury/Mariner V‑6 outboards. Sender, if
not already installed on the outboard, must be purchased separately.
Quicksilver Branded, Box Point of Sale Packaged.
INSTRUMENTS
INTERNATIONAL II WATER PRESSURE GAUGE
79-895288Q45
Anti‑fog lens. 2 to 40 psi gauge with quick‑connect terminals for connection to light.
Black face and Black bezel; Orange graduations. Complete kit. Includes 25 ft.(7.6
m) of tubing and hardware.
Replacement hose not sold separate, obtain locally.
Fits 75‑115 hp EFI FourStroke Outboards, serial number 1B366823 & above.
Quicksilver Branded, Box Point of Sale Packaged.
79-895288Q46
Anti‑fog lens. 2 to 40 psi gauge with quick‑connect terminals for connection to light.
Black face and Black bezel; Orange graduations. Replacement gauge only.
Fits 75‑115 hp EFI FourStroke Outboards, serial number 1B366823 & above.
79-895288Q41
Anti‑fog lens. 1 to 15 psi gauge with quick‑connect terminals for connection to light.
Black face and Black bezel; Orange graduations. Complete kit. Includes 25 ft.(7.6
m) of tubing and hardware.
Replacement hose not sold separate, obtain locally.
Fits Mercury/Mariner 25/30/40/45/50/75/90/115/225 (4‑stroke), all V‑6 (except 3.0L
1998 and older) ; and Force 75, 90 and 120. The 75/90/115/225 FourStroke
outboards require a reducer fitting p/n 22‑86306.
Quicksilver Branded, Box Point of Sale Packaged.
INTERNATIONAL II FUEL GAUGE
Quicksilver Branded, Box Point of Sale Packaged.
79-895288Q42
Anti‑fog lens. 1 to 15 psi gauge with quick‑connect terminals for connection to light.
Black face and Black bezel; Orange graduation. Service replacement gauge.
Fits Mercury/Mariner 25/30/40/45/50/75/90/115/225 (4‑stroke), all V‑6 (except 3.0L
1998 and older) ; and Force 75, 90 and 120. The 75/90/115/225 FourStroke
outboards require a reducer fitting p/n 22‑86306.
Quicksilver Branded, Box Point of Sale Packaged.
INTERNATIONAL II WATER PRESSURE GAUGE
79-895291Q41
Anti‑fog lens. Black face and Black bezel; Oraqnge/White graduations. Bulk
Package of 24 pcs. 12 volt system and 240 ohm sender required.
Quicksilver Branded, Box Point of Sale Packaged.
FUEL GAUGE SENDING UNIT
79-895288Q43
Anti‑fog lens. 2 to 30 psi gauge with quick‑connect terminals for connection to light.
Black face and Black bezel; Orange graduations. Complete kit. Includes 25 ft.(7.6
m) of tubing and hardware.
Replacement hose not sold separate, obtain locally.
Fits Mercury/Mariner 25/30/40/45/50/75/90/115/225 (4‑stroke), all V‑6 (except 3.0L
1998 and older) ; and Force 75, 90 and 120. The 75/90/115/225 FourStroke
outboards require a reducer fitting p/n 22‑86306.
851052Q
Designed for tanks that have a 5 screw flange. Use with 12 volt system. 33‑240
ohm. Adjusts from 4 in.(10.2 cm) to 24 in.(60.7 cm)
Quicksilver Branded, Clamshell Package Point of Sale Packaged.
Quicksilver Branded, Box Point of Sale Packaged.
424
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
INTERNATIONAL II TRIM GAUGE
INTERNATIONAL II CLOCK
79-895292Q41
Anti‑fog lens. Black face and Black bezel; Orange/White graduations. 12 volt
system
79-895297Q41
Anti‑fog lens. Black face and Black bezel; Orange/White graduations. Wiring is
included in this single pack.
Quicksilver Branded, Box Point of Sale Packaged.
Quicksilver Branded, Box Point of Sale Packaged.
INTERNATIONAL II DUAL ENGINE SYNCHRONIZER
DEPTH SOUNDERS
DIGITAL DEPTH GAUGE KIT
INSTRUMENTS
79-895294Q41
Anti‑fog lens. Black face and Black bezel; Orange/White graduations. Connects to
tachometers.
Fits both 2‑stroke and 4‑stroke gasoline engine applications.
Quicksilver Branded, Box Point of Sale Packaged.
SYNCHRONIZEER DRIVER - GAUGES
79-879292A01
Black face and black bezel. Digital depth readout to 199 feet, display is backlit for
night operation. Easy addition to any boat. Fits in a cutout for standard 2 in.(51
mm) gauge. Kit includes adjustable alarm, transom‑mounted/inside‑hull‑mounted
transducer. Easy to follow instructions. The affordable way to add more fun and
safety to boating.
Available in Multiple bezel colors
Mercury Branded, Box Point of Sale Packaged.
DIGITAL DEPTH GAUGE KIT
8M0053532
This product is used with the analog gauge to synchronize multilpe engines.
Any Admiral,Flagship or International II gauges
INTERNATIONAL II CRUISELOG GAUGE
79-879292A02
White face and white bezel. Digital depth readout to 199 feet, display is backlit for
night operation. Easy addition to any boat. Fits in a cutout for standard 2 in.(51
mm) gauge. Kit includes adjustable alarm, transom‑mounted/inside‑hull‑mounted
transducer. Easy to follow instructions. The affordable way to add more fun and
safety to boating.
Available in multiple bezel colors
Mercury Branded, Box Point of Sale Packaged.
79-895295Q41
Anti‑fog lens. Black face and Black bezel; Orange/White graduations. No
illumination. Wiring included with this single pack.
Quicksilver Branded, Box Point of Sale Packaged.
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
425
INSTRUMENTS
DIGITAL DEPTH GAUGE KIT
DIGITAL DEPTH/ TEMP GAUGE KIT
79-879292A05
Digital depth readout 2.5 ft to 200 ft display at speeds of up to 63 MPH. It has
backlit lighting for night operation.and incluudes the ability to set shallow water
alarm. Easy addition to any boat. Fits in a cutout for standard 2 in.(51 mm)
gauge. Order face plate, bezel and transducer seperately ( Standard bezel and
face dial liste below)
Mercury Branded, Box Point of Sale Packaged.
TRANSDUCER - IN HULL/TRANSOM DEPTH ONLY
79-879292A11
Digital depth readout dusplays 2.5 to 200 ft deep at speeds up to 63 MPH.
Includes ability to set shallow water alarm warning. Also displays air or water
temp.
Display is backlit for night operation. Easy addition to any boat. Fits in a cutout for
standard 2 in.(51 mm) gauge.
*Order bezel and transducer seperately.
(ProView bezel and special face dial listed below.)
INSTRUMENTS
Mercury Branded, Box Point of Sale Packaged.
BEZEL 52 MM
879292A08
Transducer that can be mounted In‑Hull or Transom ‑ Depth only
Can be used on most boats ‑ mounted to the outside of the transom
TRANSDUCER - THRU HULL
879292001
Bezel‑Gold 2 inch (52 MM) Bezel is a twist fit that has a round shape. Used on
Depth Sounders only
BEZEL 52 MM
79-879292A09
Transducer for Depth and Temp gauge that has 2 3/4 inch threads for deep
mounting
can be used in most sterndrive and inboard applications
TRANSDUCER - IN HULL/TRANSOM
879292002
Bezel‑Chrome 2 inch (52 MM) Bezel is a twist fit that has a round shape. Used
on Depth Sounders only
79-879292A10
Transducer that mounts In‑hull or Transom that works with Depth / Temp gauge
879292A11
Can be used on most boats ‑ mounted to the outside of the transom
426
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
BEZEL 52 MM
VDO FAMILY GAUGES
VDO PRIMARY STATION INSTRUMENTATION STANDARD
879292003
Bezel‑Flat Black 2 inch (52 MM) Bezel is a twist fit that has a round shape. Used
on Depth Sounders only
BEZEL 52 MM
881800A 1
Pre‑wired panel with 21 pin Deutsch connector for 1.7L stern drives/inboards.
Basic Instrument Set. VDO tach, warning lights for low oil pressure, charge
indicator, glow plug activation, coolant temp., water in fuel. Includes key switch,
stop button, instrument lights/audio warning test switch.
Fits MCM.MIE ‑ D1.7L DTI diesels.
879292004
Bezel‑White 2 inch (52 MM) Bezel is a twist fit that has a round shape. Used on
Depth Sounders only
FACE PLATE
881801A 1
Optional pre‑wired panel with 21 pin Deutsch connector for 1.7L stern drives.
Full Instrument Set. VDO tach, oil pressure, water temperature, battery meter &
trim guage. Also warning lights for low oil pressure, charge indicator, glow plug
activation, coolant temp., water in fuel. Includes key switch, stop button,
instrument lights/audio warning test switch.
Fits MCM D1.7L DTI diesels.
879292005
Face Plate ‑Color Black 2 inch (52 MM) Bezel is a twist fit that has a round shape.
Used on Depth Sounders only
FACE PLATE
MARINER - UNIQUE GAUGES
Gauges unique to Mariner outboards that will not be found in the
standard gauge families. Large gauge ‑ fits 3‑3/8 in.(86 mm) hole in
dash.
MODULE ASSEMBLY
879292009
Face Plate ‑Color White 2 inch (52 MM) Bezel is a twist fit that has a round shape.
Used on Depth Sounders only
17461A 2
Tachometer Module Assembly. Adapts all Quicksilver tachometers, except
79‑43984A 1, for use with Japanese built outboards.
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
427
INSTRUMENTS
VDO PRIMARY STATION INSTRUMENTATION OPTIONAL
INSTRUMENTS
SPEEDOMETER PICKUPS
WATER TEMPERATURE SENDER
SPEEDOMETER PICKUP
77409A 1
Pickup and mounting screws only
13536A14
A four wire temperature sender for use on V‑6 outboard product. Furnished
standard on engine powerhead, the fiche card specific to the application should be
used to verify correct use.
WATER TEMPERATURE SENDER
INSTRUMENTS
SPEEDOMETER PICKUP TUBING
32- 54950 53
53 ft.(16.15 m) tubing.
32- 54950600
1 roll of 1500 ft.(457.5 m) tubing.
12415
(1/8"‑27 NPT threads)
Fits outboard applications.
TEMPERATURE SENDER KIT
WATER TEMPERATURE SENDERS
Water temperature senders used for operation of a temperature gauge.
WATER TEMPERATURE SENDER
12415A 2
Allows adding a temperature sender to outboards equipped with a factory built
coastal flush. Includes a temperature sender, fittings, cable ties and instruction
sheet. This kit provides for the use of a coastal flush and a temperature sender at
the same time.
Fits Mercury/Mariner 75‑125 hp. (1993 and newer) 2 cycle outboards. Primarily
designed for adding to a Saltwater model which comes with the coastal flush as
standard equipment.
ADAPTOR HARNESS
13536A13
A two wire temperature sender for use on V‑6 outboard product. Furnished
standard on engine powerhead, the fiche card specific to the application should be
used to verify correct use.
84- 11149A55
Allows water temperature gauge hook‑up to the 225 EFI FourStroke outboard.
428
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
WATER TEMPERATURE SENDER
COOLANT TEMPERATURE SENDER
15995
Used for temperature gauge
Fits MCM 3.7L engines
ENGINE WATER TEMPERATURE SENDER
805218T
Used for temperature gauge
Fits MCM/MIE EFI models
OIL PRESSURE SENDERS
WATER TEMPERATURE SENDER
OIL PRESSURE SENSOR KIT
806490T
3/8 in. x 18 NPT threads, used for temperature gauge
Fits MCM/MIE engines
866814A01
Required when SmartCraft is installed on 3.0L MPI & Vazer engines. Replaces the
original analog oil pressure sensor with a digital sensor.
Fits MCM 3.0L MPI & Vazer engines
INSTRUMENTS
49734
For dual station installations, used for temperature gauge
Fits MCM/MIE engines
WATER TEMPERATURE SENDER
97258A 1
1/2 in. x 14 NPT threads, used for temperature gauge
Fits MCM/MIE engines
OIL PRESSURE SENDER
87-815425T
For use with 80 psi electric oil pressure gauge
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
429
INSTRUMENTS
OIL PRESSURE SENDER KIT
POWER TRIM SENDERS
POWER TRIM SENDER
828019A 1
Includes sender and harness used with oil pressure gauges and 21 ft.(6.4 m) of
wire.
Fits Mercury/Mariner 25/30/40/45/50/60 (4‑stroke).
OIL PRESSURE SENDER
805320A03
Includes trim limit switch also.
Fits MC‑I, R, MR, Alpha One, Gen II, Bravo drives.
INSTRUMENTS
POWER TRIM SENDER
805267T
For use with 120 psi electric oil pressure gauge
Used with MCM D1.7L DTI diesel engines
OIL PRESSURE SENDER
805130A 6
For dual station applications.
Fits MCM I/R/MR/Alpha One/Gen II/Bravo One & Two drives.
POWER TRIM SENDER
889835A01
150 PSI oil gauge sender with a 90 degree elbow and installation instruction sheet.
F225 4 stroke engine
805130A 8
For dual station applications.
Fits MCM TR & TRS drives.
POWER TRIM SENDER CONVERSION KIT
805134A 3
Converts single station sender to a dual station sender.
Fits MCM Alpha One/Gen II/Bravo One & Two drives.
430
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
POWER TRIM SENDER
POWER TRIM SENDER
821180A 6
Port mounted.
Fits all outboard 3‑ram trim applications except the Digital OptiMax. See
application chart for specific engine models.
888617001
Starboard mounted.
Fits the Mercury/Mariner V‑225 FourStroke outboard engine.
POWER TRIM SENDER
POWER TRIM SENDER
INSTRUMENTS
821400A 2
Starboard mounted.
Fits various in‑line outboards. See application chart for specific engine models.
891777A01
Starboard Mounted. Required for digital gauge applications.
Fits Mercury/Mariner 75/90/115hp (1.5L) OptiMax outboard engines, Model Year
2004 and newer.
POWER TRIM SENDER
TRIM SENSOR CONVERTER KIT
8M0059529
This kit will allow you to convert the signal from the digital sensor to an analog
signal. It will allow you to drive an analog gauge for trim only without changing the
sensor to an analog sensor. This kit will connect directly to the harness inside the
emgine cowl.
150 HP 4 Stroke engine only
822573A12
Port mounted. Contains 6‑32 threaded mounting screws.
Fits various in‑line outboards. See application chart for specific engine models.
POWER TRIM SENDER
859187A 1
Port mounted.
Fits Mercury/Mariner V‑6 Digital OptiMax outboards (USA 0G960500 and Newer).
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
431
INSTRUMENTS
POWER TRIM SENDER CHART
INSTRUMENTS
Mercury/Mariner Trim Senders
Model
Brand
Model Notes
Year Range
Country
Serial # Range
Port Mount Trim Sender Stbd. Mount Trim
Sender
25 FourStroke
Mercury/Mariner
Carb Models only
1998 - 2006
USA
0G590000 and up
822573A12
N/A
25 FourStroke
Mercury/Mariner
Carb Models only
1999 - 2006
BEL
0P017000 and up
822573A12
N/A
25 FourStroke
Mercury/Mariner
EFI w/ 6-32 threads
2006 - 2012
JPN
0R106999 and up
822573A12
N/A
25 FourStroke
Mercury/Mariner
EFI w/ 6-32 threads
2006 - 2012
BEL
0P401000 and up
822573A12
N/A
N/A
30
Mercury/Mariner
2 cylinder
1995 - 2012
USA
0G124405 and up
822573A12
30
Mercury/Mariner
2 cylinder
1995 - 2012
BEL
9840763 and up
822573A12
N/A
30 FourStroke
Mercury/Mariner
3 cylinder Non-BigFoot Models.
1999 - 2005
USA
0G760300 - 1B226999
N/A
821400A 2
30 FourStroke
Mercury/Mariner
3 cylinder Non-BigFoot models.
1999 - 2005
BEL
0P017000 - 0P400999
N/A
821400A 2
30 FourStroke
Mercury/Mariner
EFI w/ 6-32 threads
2006 - 2012
JPN
0R106999 and up
822573A12
N/A
30 FourStroke
Mercury/Mariner
EFI w/ 6-32 threads
2006 - 2012
BEL
0P401000 and up
822573A12
N/A
30 JET
Mercury/Mariner
4 cylinder
1993 - 1997
USA
0C159200 - 0G589999
N/A
N/A
N/A
30 JET
Mercury/Mariner
3 cylinder
1998 - 2000
USA
0G590000 - 0T178499
822573A12
30 JET
Mercury/Mariner
3 cylinder
1999 - 2000
BEL
0P017000 - 0P094499
822573A12
N/A
35
Mercury/Mariner
2 cylinder
1984 - 1989
USA
6445653 - 0C221999
N/A
N/A
35
Mercury/Mariner
2 cylinder
1984 - 1989
BEL
9384476 and up
N/A
N/A
35
Mercury/Mariner
2 cylinder
1984 - 1989
CAN
7209608 and up
N/A
N/A
N/A
40
Mercury/Mariner
4 cylinder with integral trim.
1989 - 1992
USA
0C159200 - 0D181999
N/A
40
Mercury/Mariner
4 cylinder with integral trim.
1989 - 1992
BEL
9570790 - 9740999
N/A
N/A
40
Mercury/Mariner
4 cylinder
1993 - 1997
USA
0D182000 - 0G589999
N/A
821400A 2
40
Mercury/Mariner
4 cylinder
1993 - 1997
BEL
9741000 - 9973099
N/A
821400A 2
40
Mercury/Mariner
2 cylinder
1995 - 2012
USA
0G124405 and up
822573A12
N/A
40
Mercury/Mariner
2 cylinder
1995 - 2012
BEL
9840763 and up
822573A12
N/A
40
Mercury/Mariner
3 cylinder, 59 CID, Long shaft only.
1997 1/2 - 2012
USA
0G531301 and up
822573A12
N/A
40
Mercury/Mariner
3 cylinder, 59 CID, Long shaft only.
1997 1/2 - 2012
BEL
9973100 and up
822573A12
N/A
40 FourStroke
Mercury/Mariner
3 cylinder Non-BigFoot models.
1999 - 2012
USA
0G760300 and up
N/A
821400A 2
40 FourStroke
Mercury/Mariner
3 cylinder Non-BigFoot models.
1999 - 2012
BEL
0P017000 and up
N/A
821400A 2
40 FourStroke
Mercury/Mariner
3 cylinder BigFoot models.
1999 - 2002
USA
0G760300 - 0T408999
N/A
821400A 2
40 FourStroke
Mercury/Mariner
3 cylinder BigFoot models.
1999 - 2002
BEL
0P017000 - 0P153499
N/A
821400A 2
40 FourStroke
Mercury/Mariner
4 cylinder Italy/Bodensee
1995 - 1998
USA
0G231123 - 0G760299
822573A12
N/A
40 FourStroke
Mercury/Mariner
4 cylinder Italy/Bodensee
1999 - 2000
BEL
0P073323 - 0P094499
N/A
821400A 2
40 FourStroke
Mercury/Mariner
4 cylinder, 996 cc., BigFoot models.
2001 - 2012
USA
0T228405 - 1B344306
N/A
821400A 2
40 FourStroke
Mercury/Mariner
4 cylinder, 996 cc., BigFoot models.
2001 - 2012
BEL
0P094500 and up
N/A
821400A 2
40 FourStroke
Mercury/Mariner
4 cylinder, 996 cc., BigFoot models.
40 JET
Mercury/Mariner
40 JET
Mercury/Mariner
45
Mercury/Mariner
2006 - 2012
CHN
1C000001 and up
N/A
821400A 2
2001 - 2012
USA
0T178500 and up
822573A12
N/A
2001 - 2012
BEL
0P094500 and up
822573A12
N/A
4 cylinder
1986 - 1989
USA
5531630 - 0D000749
N/A
N/A
45
Mercury/Mariner
4 cylinder
1986 - 1989
AUS
8063985 and up
N/A
N/A
45
Mercury/Mariner
4 cylinder
1986 - 1989
BEL
9248006 - 9683054
N/A
N/A
45
Mercury/Mariner
4 cylinder
1986 - 1989
CAN
7143688 and up
N/A
N/A
45 FourStroke
Mercury/Mariner
4 cylinder Italy/Bodensee
1995 - 1998
USA
0G231123 - 0G760299
822573A12
N/A
45 FourStroke
Mercury/Mariner
4 cylinder Italy/Bodensee
1999 - 2000
BEL
0P073323 - 0P094499
N/A
821400A 2
45 JET
Mercury/Mariner
3 cylinder, 51.8 CID
1993 - 1997
USA
0D182000 - 0G589999
N/A
821400A 2
45 JET
Mercury/Mariner
3 cylinder, 59 CID
1998 - 2000
USA
0G590000 - 0T178499
822573A12
N/A
45 JET
Mercury/Mariner
3 cylinder, 59 CID
1998 - 2000
BEL
0P017000 - 0P094499
822573A12
N/A
50
Mercury/Mariner
4 cylinder with external trim.
1976 - 1985
USA
4357640 - 6428680
N/A
N/A
50
Mercury/Mariner
4 cylinder with external trim.
1976 - 1985
AUS
8030090 and up
N/A
N/A
50
Mercury/Mariner
4 cylinder with external trim.
1976 - 1985
BEL
9107214 - 9469199
N/A
N/A
50
Mercury/Mariner
4 cylinder with external trim.
1976 - 1985
CAN
7068998 - 7208332
N/A
N/A
50
Mercury/Mariner
3 cylinder with external trim.
1986 - 1992
USA
6428681 - 0D181999
N/A
N/A
432
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
Model
Brand
Model Notes
Year Range
Country
Serial # Range
Port Mount Trim Sender Stbd. Mount Trim
Sender
50
Mercury/Mariner
3 cylinder with external trim.
1986 - 1992
BEL
9385911 - 9733881
N/A
N/A
50
Mercury/Mariner
3 cylinder with external trim.
1986 - 1992
CAN
7208333 and up
N/A
N/A
50
Mercury/Mariner
3 cylinder, 51.8 CID
1993 - 1997
USA
0D182000 - 0G589999
N/A
821400A 2
50
Mercury/Mariner
3 cylinder, 51.8 CID
1993 - 1997
BEL
9733882 - 9973099
N/A
821400A 2
50
Mercury/Mariner
3 cylinder, 59 CID
1998 - 2012
USA
0G590000 and up
822573A12
N/A
50
Mercury/Mariner
3 cylinder, 59 CID
1998 - 2012
BEL
9973100 and up
822573A12
N/A
50 FourStroke
Mercury/Mariner
4 cylinder Non-BigFoot models.
1995 - 1998
USA
0G231123 - 0G760299
822573A12
N/A
50 FourStroke
Mercury/Mariner
4 cylinder Non-BigFoot models.
1999 - 2000
USA
0G760300 - 0T178499
N/A
821400A 2
50 FourStroke
Mercury/Mariner
4 cylinder BigFoot models.
1998 - 2000
USA
0G590000 - 0T178499
N/A
821400A 2
50 FourStroke
Mercury/Mariner
4 cylinder, 996 cc., all models.
2001 - 2012
USA
0T178500 - 1B344306
N/A
821400A 2
50 FourStroke
Mercury/Mariner
4 cylinder, 996 cc., all models.
2001 - 2012
BEL
0P094500 and up
N/A
821400A 2
50 FourStroke
Mercury/Mariner
4 cylinder, 996 cc., BigFoot models.
2006 - 2012
CHN
1C000001 and up
N/A
821400A 2
55
Mercury/Mariner
3 cylinder, 51.8 CID
1996 - 1997
USA
0D00750 - 0G589999
N/A
N/A
N/A
55
Mercury/Mariner
3 cylinder, 51.8 CID
1996 - 1997
BEL
9741042 - 9973099
N/A
55
Mercury/Mariner
3 cylinder, 59 CID
1998 - 2012
USA
0G590000 and up
N/A
821400A 2
55
Mercury/Mariner
3 cylinder, 59 CID
1998 - 2012
BEL
9973100 and up
N/A
821400A 2
Mercury/Mariner
3 cylinder with external trim.
1984 - 1987
USA
6428681 - 0B122929
N/A
N/A
Mercury/Mariner
3 cylinder with external trim.
1984 - 1987
BEL
9385911 - 9469199
N/A
N/A
N/A
60
Mercury/Mariner
3 cylinder with external trim.
1984 - 1987
CAN
7208333 - 0A721307
N/A
60
Mercury/Mariner
3 cylinder with internal trim.
1989 - 1992
USA
0C160936 - 0D181999
N/A
N/A
60
Mercury/Mariner
3 cylinder with internal trim.
1989 - 1992
BEL
9469200 - 9733881
N/A
N/A
N/A
60
Mercury/Mariner
3 cylinder with internal trim.
1989 - 1992
CAN
0A721308 and up
N/A
60
Mercury/Mariner
3 cylinder, all models.
1993 - 2012
USA
0D182000 and up
N/A
821400A 2
60
Mercury/Mariner
3 cylinder, all models.
1993 - 2012
BEL
9733882 and up
N/A
821400A 2
60 FourStroke
Mercury/Mariner
4 cylinder, 996 cc., all models.
2001 - 2012
USA
0T178500 - 1B344306
N/A
821400A 2
60 FourStroke
Mercury/Mariner
4 cylinder, 996 cc., all models.
2001 - 2012
BEL
0P094500 and up
N/A
821400A 2
60 FourStroke
Mercury/Mariner
4 cylinder, 996 cc., BigFoot models.
2006 - 2012
CHN
1C000001 and up
N/A
821400A 2
70
Mercury/Mariner
3 cylinder with 3-ram trim.
1987 - 1989
USA
0A966142 - 0C221999
821180A 6
N/A
70
Mercury/Mariner
3 cylinder with 3-ram trim.
1987 - 1989
BEL
9502500 - 9589032
821180A 6
N/A
70
Mercury/Mariner
3 cylinder with single ram trim.
1987 - 1989
USA
0A966142 - 0C221999
N/A
821400A 2
821400A 2
70
Mercury/Mariner
3 cylinder with single ram trim.
1987 - 1989
BEL
9502500 - 9589032
N/A
75
Mercury/Mariner
4 cylinder with 3-ram trim.
1984 - 1987
USA
6428681 - 0B122929
821180A 6
N/A
75
Mercury/Mariner
4 cylinder with 3-ram trim.
1984 - 1987
BEL
9385911 - 9469199
821180A 6
N/A
75
Mercury/Mariner
4 cylinder with 3-ram trim.
1984 - 1987
CAN
7208333 - 0A721307
821180A 6
N/A
75
Mercury/Mariner
4 cylinder with single ram trim.
1984 - 1987
USA
6428681 - 0B122929
N/A
821400A 2
75
Mercury/Mariner
4 cylinder with single ram trim.
1984 - 1987
BEL
9385911 - 9469199
N/A
821400A 2
75
Mercury/Mariner
4 cylinder with single ram trim.
1984 - 1987
CAN
7208333 - 0A721307
N/A
821400A 2
75
Mercury/Mariner
3 cylinder with 3-ram trim.
1987 - 1997 1/2
USA
0A966142 - 0G531985
821180A 6
N/A
75
Mercury/Mariner
3 cylinder with 3-ram trim.
1987 - 1997 1/2
BEL
9502500 - 9502500
821180A 6
N/A
75
Mercury/Mariner
3 cylinder with single ram trim.
1987 - 2012
USA
0A966142 and up
N/A
821400A 2
75
Mercury/Mariner
3 cylinder with single ram trim.
1987 - 2012
BEL
9502500 and up
N/A
821400A 2
75 Optimax
Mercury/Mariner
1.5L DFI, non-digital sender.
2004 - 2012
USA
0T800750 and up
N/A
821400A 2(1)
75 Optimax
Mercury/Mariner
1.5L DFI, digital sender.
2004 - 2012
USA
0T800750 and up
N/A
891777A01(2)
USA
75 FourStroke
Mercury/Mariner
2000 - 2005
75 FourStroke
mercury/Mariner
2006 - 2012
0G960500 - 1B366822
N/A
821400A 2
1B366823 and up
N/A
821400A 2
N/A
80
Mercury/Mariner
4 cylinder with external trim.
1978 - 1983
USA
4831999 - 6432900
N/A
80
Mercury/Mariner
4 cylinder with external trim.
1978 - 1983
AUS
8050200 and up
N/A
N/A
80
Mercury/Mariner
4 cylinder with external trim.
1978 - 1983
BEL
9177626 - 9393855
N/A
N/A
N/A
80
Mercury/Mariner
4 cylinder with external trim.
1978 - 1983
CAN
7110998 - 7208572
N/A
80
Mercury/Mariner
3 cylinder with 3-ram trim.
1987 - 1989
USA
0A966142 - 0C221999
821180A 6
N/A
80
Mercury/Mariner
3 cylinder with 3-ram trim.
1987 - 1989
BEL
9502500 - 9589032
821180A 6
N/A
80
Mercury/Mariner
3 cylinder with single ram trim.
1987 - 1989
USA
0A966142 - 0C221999
N/A
821400A 2
80
Mercury/Mariner
3 cylinder with single ram trim.
1987 - 1989
BEL
9502500 - 9589032
N/A
821400A 2
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
433
INSTRUMENTS
60
60
INSTRUMENTS
INSTRUMENTS
Model
Brand
Model Notes
Year Range
Country
Serial # Range
Port Mount Trim Sender Stbd. Mount Trim
Sender
90
Mercury/Mariner
6 cylinder with external trim.
1978 - 1986
USA
4845301 - 0A966141
N/A
N/A
90
Mercury/Mariner
6 cylinder with external trim.
1978 - 1986
AUS
8060545 and up
N/A
N/A
90
Mercury/Mariner
6 cylinder with external trim.
1978 - 1986
CAN
7111698 and up
N/A
N/A
90
Mercury/Mariner
3 cylinder with 3-ram trim.
1987 - 1997 1/2
USA
0A966142 - 0G531985
821180A 6
N/A
90
Mercury/Mariner
3 cylinder with 3-ram trim.
1987 - 1997 1/2
BEL
9502500 - 9502500
821180A 6
N/A
90
Mercury/Mariner
3 cylinder with single ram trim.
1987 - 2012
USA
0A966142 and up
N/A
821400A 2
90
Mercury/Mariner
3 cylinder with single ram trim.
1987 - 2012
BEL
9502500 and up
N/A
821400A 2
90 Optimax
Mercury/Mariner
1.5L DFI, non-digital sender.
2004 - 2012
USA
0T800750 and up
N/A
821400A 2(1)
1.5L DFI, digital sender.
891777A01(2)
90 Optimax
Mercury/Mariner
2004 - 2012
USA
0T800750 and up
N/A
90 FourStroke
Mercury/Mariner
2000 - 2006
USA
0G960500 - 1B366822
N/A
821400A 2
90 FourStroke
Mercury/Mariner
2006 - 2012
USA
1B366823 and up
N/A
821400A 2
100
Mercury/Mariner
4 cylinder with 3-ram trim.
1988 - 1993
USA
0B209468 - 0D283221
821180A 6
821400A 2
100
Mercury/Mariner
4 cylinder with 3-ram trim.
1988 - 1993
BEL
9523034 - 9793576
821180A 6
821400A 2
821400A 2
100
Mercury/Mariner
4 cylinder with single ram trim.
1988 - 2012
USA
0B209468 and up
N/A
100
Mercury/Mariner
4 cylinder with single ram trim.
1988 - 2012
BEL
9523034 and up
N/A
821400A 2
115
Mercury/Mariner
6 cylinder with external trim.
1978 - 1988
USA
4855153 - 0C099999
N/A
N/A
N/A
115
Mercury/Mariner
6 cylinder with external trim.
1978 - 1988
AUS
8051950 and up
N/A
115
Mercury/Mariner
6 cylinder with external trim.
1978 - 1988
CAN
7112248 and up
N/A
N/A
115
Mercury/Mariner
4 cylinder with 3-ram trim.
1988 - 1993
USA
0B209468 - 0D283221
821180A 6
821400A 2
115
Mercury/Mariner
4 cylinder with 3-ram trim.
1988 - 1993
BEL
9523034 - 9793576
821180A 6
821400A 2
115
Mercury/Mariner
4 cylinder with single ram trim.
1988 - 2012
USA
0B209468 and up
N/A
821400A 2
821400A 2
115
Mercury/Mariner
4 cylinder with single ram trim.
1988 - 2012
BEL
9523034 and up
N/A
115 Optimax
Mercury/Mariner
2.5L DFI, non-digital sender.
2000
USA
0G960500 - 0T178499
821180A 6(1)
N/A
115 Optimax
Mercury/Mariner
2.5L DFI, digital sender.
2000
USA
0G960500 - 0T178499
859187A 1(2)
N/A
821400A 2(1)
115 Optimax
Mercury/Mariner
1.5L DFI, non-digital sender.
2004 - 2012
USA
0T800750 and up
N/A
115 Optimax
Mercury/Mariner
1.5L DFI, digital sender.
2004 - 2012
USA
0T800750 and up
N/A
891777A01(2)
115 FourStroke
Mercury/Mariner
EFI
2001 - 2005
USA
0T178500 - 1B366822
N/A
821400A 2
115 FourStroke
Mercury/Mariner
EFI
2006 - 2012
USA
1B366823 and up
N/A
821400A 2
125
Mercury/Mariner
4 cylinder
1994 - 2012
USA
0D283222 and up
N/A
821400A 2
4 cylinder
125
Mercury/Mariner
225 FourStroke
Mercury/Mariner
1994 - 2012
BEL
9793577 and up
N/A
821400A 2
2003 - 2012
USA
0T653945 and up
N/A
888617001(1)
V-6
Mercury/Mariner
Non-digital sender & 3-ram trim.
All
USA
All - All
821180A 6(1)
N/A
V-6
Mercury/Mariner
Digital sender & 3-ram trim.
2000 - 2012
USA
0G960500 and up
859187A 1(2)
N/A
(1) For use with analog gauges.
(2) For use with 555 controller and SmartCraft gauges or monitors.
434
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
SERVICE MONITORS
Digital tach and hourmeter. Features LCD display and resettable
hourmeter.
SERVICE MONITOR
17334A 7
Single LED light. Indicates low oil level/flow (flashing light) and engine overheat
(steady light). With EFI models, a flashing light also indicates that the water
separating fuel filter requires servicing. Includes 4 ft.(1.2 m) harness.
Fits Mercury/Mariner 135 hp. 2.0L V‑6 outboards, carb and EFI (USA 0G960500
and newer) and Mercury/Mariner 2.5L V‑6 outboard engines, carb and EFI (USA
0G960500 and newer).
LOW OIL WARNING KIT
79-8M0050399
Fits most Outboards and gasoline MCM/MIE engines. Will not work with diesel
product. Replaces old versions with a universal product.
Quicksilver Branded, Clamshell Package Point of Sale Packaged.
Allows pre‑drilling dash for adding 2‑1/8 in.(54 mm) gauges at a later
date.
WARNING LIGHT GAUGE
INSTRUMENT HOLE COVER KIT
79-859697A 1
Flagship series 2 light gauge. Black face and bezel. Indicates low oil level and
engine overheat.
Fits Mercury/Mariner 25/40/45/50 hp (4‑stroke) and 225 Carb (3.0L)
79- 79889A 1
Mercury Branded
WARNING LIGHT GAUGE
WARNING LIGHT KITS & HARNESSES
WARNING LIGHT GAUGE
17334A 2
Single halogen light. Indicates low oil level/flow (flashing light) and engine overheat
(steady light). With EFI models, a flashing light also indicates that the water
separating fuel filter requires servicing. Includes 4 ft.(1.2 m) harness.
Fits Mercury/Mariner 30‑125hp. thru current models, 135hp. V‑6, carb and EFI
(USA 0G960499 and prior) and 150‑200hp. (2.5L) carb and EFI (USA 0G960499
and prior).
79-859697K 2
Flagship series 2 light gauge. Black face and bezel. Indicates low oil level and
engine overheat.
Fits F225 4 stroke engines. (150 PSI oil sender 889835A01 required)
Mercury Branded
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
435
INSTRUMENTS
INSTRUMENT HOLE COVER KIT
8M0031424
Designed to be installed at or near the remote control box, the warning signal is
received through the tachometer harness.
Works with electric remote control models only. Fits the 15 hp. FourStroke
0R235949 and above, 20 hp. FourStroke and the 25/30 hp. EFI FourStroke
outboards.
INSTRUMENTS
WARNING LIGHT GAUGE
20 FT. EXTENSION HARNESS
79-859697A11
Flagship series 2 light gauge. White face and bezel. Indicates low oil level and
engine overheat.
Fits Mercury/Mariner 25/40/45/50 hp (4‑stroke) and 225 Carb (3.0L)
84-835359A 1
For use with 4 light warning kit.
MOVING PROP ALERT LIGHT SYSTEM
Mercury Branded
INSTRUMENTS
OIL PRESSURE SENDER
889835A01
150 PSI oil gauge sender with a 90 degree elbow and installation instruction sheet.
F225 4 stroke engine
WARNING LIGHT GAUGE
8M0052290
Moving Prop (MP Alert) Alert Light system is a highly visible light system that
provides additional notice to swimmers when the engine is running and the
propeller is in motion. This kit is a one light kit that includes a smart light with 6
LED lights, a control module (connected to the engine computer) and the wiring
harness that is 20 ft (other lengths available) Also included is hardware needed to
mount the light. Additonal lights can be purchased to add to the system.
Any Can Based ( reference SmartCraft) Mercury engine (OB‑ 40 HP and up as
well as Mercruiser products)
MOVING PROP ALERT LIGHT SYSTEM
79-859698A 1
Flagship series 3 light gauge. Black face and bezel. Indicates low oil level, engine
overheat and water in fuel.
Fits Mercury/Mariner 225/250 EFI (3.0L), Model Year 2001 and prior.
Mercury Branded
20 FT. EXTENSION HARNESS
8M0052291
Moving Prop (MP Alert) Alert Light system is a highly visible light system that
provides additional notice to swimmers when the engine is running and the
propeller is in motion. This kit is a two light kit that includes the smart lights with 6
LED lights each , a control module (connected to the engine computer) and the
wiring harness that is 20 ft (other lengths available) Also included is hardware
needed to mount the light. Additonal lights can be purchased to add to the system.
Any Can Based ( reference SmartCraft) Mercury engine (OB‑ 40 HP and up as
well as Mercruiser products)
84-827752A 1
For use with 3 light warning kit.
436
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
LIGHT SWITCH WITH LED - MP ALERT
HARNESS EXTENSION MP ALERT
8M0052292
Optional switch and warning light kit for the MP Alert Light System. This switch can
be added to the system to control the on‑off function manually.
Any Can Based ( reference SmartCraft) Mercury engine (OB‑ 40 HP and up as
well as Mercruiser products)
84-8M0054183
Hanres for connectiing MP Alert light to front of boat 10 ft
MP Alert
MP ALERT - ADD A LIGHT
84-8M0054185
Hanres for connectiing MP Alert light to front of boat 20 ft
MP Alert
84-8M0054187
Hanres for connectiing MP Alert light to front of boat 50 ft
MP Alert
8M0058173
This kit will allow you to add additional lights to the MP Alert kits. Each kit includes
one light and a Y hanress to allow you to easily add a third or forth light on the
boat.
Any Mercury 40 HP and up engine that is SmartCraft compatible
WARNING BUZZER KITS
WARNING BUZZER
MP ALERT LIGHT
F5H043
Replacement warning buzzer only.
Fits electric start Force models.
88-8M0058669
Service replacement light for the MP Alert kit
MP Alert
MODULE, MP ALERT
8M0052988
Module used to control the lights on MP Alert.
Used with MP Alert light system (controller)
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
437
INSTRUMENTS
84-8M0054186
Hanres for connectiing MP Alert light to front of boat 30 ft
MP Alert
INSTRUMENTS
INSTRUMENTS
MECHANICAL TRIM POSITION INDICATORS - 1
POINTER
MECHANICAL TRIM POSITION INDICATORS - 2
POINTER
Cables not included with indicator kits. Order F5H208/_ cables or
64‑820676A_ cables to proper length. Trim position indicator and bezel
selection chart available within the Instrument section.
Cables not included with indicator kits. Order F5H208/_ cables or
64‑820676A_ cables to proper length. Trim position indicator and bezel
selection chart available within the Instrument section.
TRIM POSITION INDICATOR
TRIM POSITION INDICATOR
848444A 1
1 pointer. Bottom cable entry. Gray faceplate and black bezel.
Fits single sterndrive.
845313A 1
2 pointer. Top cable entry. Gray faceplate and black bezel.
Fits twin MCM sterndrives or trim tabs.
TRIM POSITION INDICATOR
848444A 6
1 pointer. Bottom cable entry. White faceplate and bezel.
Fits single sterndrive.
848445A 1
1 pointer. Top cable entry. Gray faceplate and black bezel.
Fits single sterndrive.
TRIM POSITION INDICATOR
845313A 6
2 pointer. Top cable entry. White faceplate and bezel.
Fits twin MCM sterndrives or trim tabs.
TRIM POSITION INDICATOR
TRIM POSITION INDICATOR
845314A 1
2 pointer. Bottom cable entry. Gray faceplate and black bezel.
Fits twin MCM sterndrives or trim tabs.
848445A 6
1 pointer. Top cable entry. White faceplate and bezel.
Fits single sterndrive.
438
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
TRIM POSITION INDICATOR
845314A 6
2 pointer. Bottom cable entry. White faceplate and bezel.
Fits twin MCM sterndrives or trim tabs.
845766A 6
3 pointer. Bottom cable entry. White faceplate and bezel.
Fits triple MCM sterndrives or single MCM sterndrive and twin trim tabs.
MECHANICAL TRIM POSITION INDICATORS - 3
POINTER
MECHANICAL TRIM POSITION INDICATORS - 4
POINTER
Cables not included with indicator kits. Order F5H208/_ cables or
64‑820676A_ cables to proper length. Trim position indicator and bezel
selection chart available within the Instrument section.
Cables not included with indicator kits. Order F5H208/_ cables or
64‑820676A_ cables to proper length. Trim position indicator and bezel
selection chart available within the Instrument section.
TRIM POSITION INDICATOR
TRIM POSITION INDICATOR
845765A 1
3 pointer. Top cable entry. Gray faceplate and black bezel.
Fits triple MCM sterndrives or single MCM sterndrive and twin trim tabs.
844945A 1
4 pointer. Bottom cable entry. Gray faceplate and black bezel.
Fits twin MCM sterndrives and twin trim tabs.
TRIM POSITION INDICATOR
TRIM POSITION INDICATOR
845765A 6
3 pointer. Top cable entry. White faceplate and bezel.
Fits triple MCM sterndrives or single MCM sterndrive and twin trim tabs.
844945A 6
4 pointer. Bottom cable entry. White faceplate and bezel.
Fits twin MCM sterndrives and twin trim tabs.
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
439
INSTRUMENTS
TRIM POSITION INDICATOR
INSTRUMENTS
TRIM POSITION INDICATOR
TRIM POSITION INDICATOR
844944A 1
4 pointer. Top cable entry. Gray faceplate and black bezel.
Fits twin MCM sterndrives and twin trim tabs
845982A 6
4 pointer. Top cable entry. White faceplate and bezel.
Fits twin MCM sterndrives and twin trim tabs.
TRIM POSITION INDICATOR
MECHANICAL TRIM POSITION INDICATORS - 5
POINTER
INSTRUMENTS
Cables not included with indicator kits. Order F5H208/_ cables or
64‑820676A_ cables to proper length. Trim position indicator and bezel
selection chart available within the Instrument section.
TRIM POSITION INDICATOR
844944A 6
4 pointer. Top cable entry. White faceplate and bezel.
Fits twin MCM sterndrives and twin trim tabs
TRIM POSITION INDICATOR
845457A 1
5 pointer. Bottom cable entry. Gray faceplate and black bezel.
Fits triple MCM sterndrives and twin trim tabs.
TRIM POSITION INDICATOR
845983A 1
4 pointer. Bottom cable entry. Gray faceplate and black bezel.
Fits twin MCM sterndrives and twin trim tabs.
TRIM POSITION INDICATOR
845457A 6
5 pointer. Bottom cable entry. White faceplate and bezel.
Fits triple MCM sterndrives and twin trim tabs.
845983A 6
4 pointer. Bottom cable entry. White faceplate and bezel.
Fits twin MCM sterndrives and twin trim tabs.
440
2012 Quicksilver Precision Parts & Accessories Guide
INSTRUMENTS
MECHANICAL TRIM POSITION INDICATOR
ACTUATOR KITS
Model
ACTUATOR KIT
Model Note
Black Bezel
Gray
Faceplate
Bottom
Cable Entry
White Bezel
White
Faceplate
Bottom
Cable Entry
Black Bezel
Gray
Faceplate
Top Cable
Entry
White Bezel
White
Faceplate
Top Cable
Entry
2 pointer 2 MCM VI - VII SSM
sterndrives or 2 trim tabs
845313A 1
845313A 6
845314A 1
845314A 6
3 pointer 3 MCM Alpha - V SSM
sterndrives
845765A 1
845765A 6
3 pointer 3 MCM VI - VII SSM
sterndrives or 1 MCM
sterndrive
846063A 1
Single
Fits MCM Alpha ‑ V SSM sterndrives
CABLE GRIP KIT
845766A 6
845766A 6
845765A 1
845765A 6
4 pointer 2 MCM Alpha - V SSM
sterndrives and 2 trim tabs
844945A 1
844945A 6
844944A 1
844944A 6
4 pointer 2 MCM VI - VII SSM
sterndrives and 2 trim tabs
or
845983A 1
845983A 6
N.L.A.
845982A 6
5 pointer 3 MCM Alpha - V SSM
sterndrives and 2 trim tabs
845457A 1
845457A 6
N.L.A.
N.L.A.
5 pointer 3 MCM VI - VII SSM
sterndrives and 2 trim tabs
or
N.L.A.
N.L.A.
N.L.A.
N.L.A.
INSTRUMENTS
846066A 1
Angled stainless steel through‑transom fitting for trim position (cable not included).
CABLE GRIP KIT
846793A 1
Straight stainless steel through‑transom fitting for trim position (cable not included).
MECHANICAL TRIM POSITION INDICATOR &
BEZEL CHART
Trim Position Indicators
Model
Model Note
Black Bezel
Gray
Faceplate
Bottom
Cable Entry
White Bezel
White
Faceplate
Bottom
Cable Entry
Black Bezel
Gray
Faceplate
Top Cable
Entry
White Bezel
White
Faceplate
Top Cable
Entry
1 pointer 1 sterndrive or 1 paralift
848444A 1
848444A 6
848445A 1
848445A 6
2 pointer 2 MCM Alpha - V SSM
sterndrives or 2 trim tabs
845314A 1
845314A 6
845313A 1
845313A 6
Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. For more
information, please contact your local Mercury, Mariner, MerCruiser or Quicksilver Office.
441