MORE HERE >
Welcome
Welcome to the world of Motorola digital wireless communications! We are pleased that you have chosen the Motorola V600
GSM wireless phone.
This guide is a companion to the Start Here user’s guide that is packaged with the Motorola V600 GSM wireless phone. Refer to
the Start Here guide for general information about using the phone. This guide contains information about topics and features
that are not covered in detail in the Start Here guide.
Note: This guide is not a replacement for the Start
Here guide that you received with your wireless
phone. You should retain your Start Here guide.
The Start Here guide contains important safety,
instructional, and general information on the use
of your wireless phone that is not included in this
guide. You are encouraged to review your Start
Here guide whenever you have any questions
concerning the use of your phone.
1
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States)
1-800-461-4575 (Canada)
www.motorola.com (United States)
www.motorola.ca (Canada)
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by
Motorola, Inc. under license. Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
All other product or service names are the property of their respective owners.
© Motorola, Inc. 2003.
Caution: Changes or modifications made in the radio phone, not expressly approved by Motorola, will void the user’s authority to operate the equipment.
Software Copyright Notice
The Motorola products described in this manual may include copyrighted Motorola and third-party software stored in semiconductor memories or other media. Laws in
the United States and other countries preserve for Motorola and third-party software providers certain exclusive rights for copyrighted software, such as the exclusive
rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola products shall not be deemed
to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third-party software
provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.
Manual number: 6809477A13-O
2
Menu Map
Main Menu
n Phonebook
s Recent Calls
•
•
•
•
e
Settings Menu
l
Personalize
• Home Screen
• Main Menu
• Color Style
• Greeting
• Wallpaper
• Screen Saver
t
Ring Styles
• Style
•
Style Detail
• Ring Lights
• Event Lights
Received Calls
Dialed Calls
Notepad
Call Times
Messages
• Create Message
• Email Msgs
• Message Inbox
• Voicemail
• Browser Msgs
• Info Services
• Quick Notes
• Outbox
• Drafts
• MMS Templates
L Connection
• Bluetooth Link
• Sync
H Call Forward
•
•
•
•
•
É Office Tools
•
•
•
•
•
•
•
Q
á
SIM Applications
Calculator
Datebook
Shortcuts
Voice Records
Alarm Clock
Dialing Services
• Fixed Dial
• Service Dial
Games & Apps
Web Access
• Browser
• Browser Setup
• Web Sessions
h Multimedia
•
•
•
•
•
•
Themes
Camera
Pictures
Sounds
MotoMixer
Videos
B AIM®
w Settings
(see column at right)
U
Voice Calls
Fax Calls
Data Calls
Cancel All
Forward Status
In-Call Setup
• In-Call Timer
• My Caller ID
• Talk and Fax
• Answer Options
• Call Waiting
Z Initial Setup
•
•
•
•
•
•
•
•
•
•
•
•
Time and Date
1-Touch Dial
Display Timeout
Backlight
TTY Setup
Scroll
Language
Battery Save
Brightness
DTMF
Master Reset
Master Clear
m Phone Status
•
•
•
•
My Tel. Numbers
Active Line
Battery Meter
Other Information
S Headset
J Car Settings
j Network
u Security
This is the standard main menu layout. Menu organization and feature names
may vary on your phone. Not all features may be available on your phone.
•
•
•
•
•
•
Phone Lock
Lock Application
Fixed Dial
Call Barring
SIM PIN
New Passwords
c Java Settings
•
•
•
•
•
•
Java System
Delete All Apps
App Vibration
App Volume
App Backlight
DNS IP
Shortcuts
Change ringer alert:
Open flip, press down volume key to decrease volume, then switch
to vibrate alert, then silent alert. Press up volume key to reset ring
alert and increase volume.
Display my phone number:
Press M # (from home screen).
Go to dialed calls list:
Press N (from home screen).
Exit menu system:
Press O.
3
Contents
Menu Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setting Up the Message Inbox . . . . . . . . . . . . . . . . . . 5
Sending a Text Message . . . . . . . . . . . . . . . . . . . . . . . 5
Sending a Quick Note Text Message . . . . . . . . . . . . . 6
Sending a Multimedia Message . . . . . . . . . . . . . . . . . 6
Using MMS Templates . . . . . . . . . . . . . . . . . . . . . . . . 7
Sending a Multimedia Letter . . . . . . . . . . . . . . . . . . . . 7
Viewing the Status of Sent Messages. . . . . . . . . . . . . 8
Tips For Sending Messages . . . . . . . . . . . . . . . . . . . . 8
Receiving a Message . . . . . . . . . . . . . . . . . . . . . . . . . 8
Reading, Locking, or Deleting a Message. . . . . . . . . . 9
Storing an Object From a
Multimedia Message or Letter . . . . . . . . . . . . . . . . . . . 9
Reading Browser Messages . . . . . . . . . . . . . . . . . . . 10
Reading Information Service Messages . . . . . . . . . . 10
Using AOL® Instant Messenger™ . . . . . . . . . . . . . . 11
Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Setting Up the Email Inbox . . . . . . . . . . . . . . . . . . . . 13
Sending an Email Message. . . . . . . . . . . . . . . . . . . . 14
Viewing the Status of Sent Email Messages. . . . . . . 14
Receiving an Email Message . . . . . . . . . . . . . . . . . . 14
Reading, Locking, or Deleting an Email Message. . . 15
Manually Sending and Receiving Email . . . . . . . . . . 15
Calling a Phone Number in an Email Message. . . . . 15
Sending Email to an Embedded Email Address . . . . 15
Going to a Web Address in an Email Message. . . . . 15
Creating Personal Folders. . . . . . . . . . . . . . . . . . . . . 16
Moving Email to a Personal Folder . . . . . . . . . . . . . . 16
Renaming a Personal Folder. . . . . . . . . . . . . . . . . . . 16
Deleting a Personal Folder . . . . . . . . . . . . . . . . . . . . 16
Setting Up Your Phonebook . . . . . . . . . . . . . . . . . . . 17
Creating a Phonebook Entry . . . . . . . . . . . . . . . . . . . 17
Creating a Group Mailing List . . . . . . . . . . . . . . . . . . 18
Storing a PIN Code With a Phone Number. . . . . . . . 18
Recording a Voice Name For a Phonebook Entry. . . 18
Dialing a Phonebook Entry . . . . . . . . . . . . . . . . . . . . 19
Storing Longer Numbers . . . . . . . . . . . . . . . . . . . . . . 19
Editing a Phonebook Entry . . . . . . . . . . . . . . . . . . . . 19
Deleting a Phonebook Entry . . . . . . . . . . . . . . . . . . . 19
Setting the Phonebook List View. . . . . . . . . . . . . . . . 19
Sorting the Phonebook List . . . . . . . . . . . . . . . . . . . . 20
Setting the Primary Number for a Phonebook Entry . 20
Using Phonebook Category Views . . . . . . . . . . . . . . 20
Copying Phonebook Entries . . . . . . . . . . . . . . . . . . . 21
Copying a Phonebook Entry to Another Device . . . . 22
Checking Phonebook Capacity . . . . . . . . . . . . . . . . . 22
Setting 1-Touch Dial Preference . . . . . . . . . . . . . . . . 22
Synchronizing Phonebook Entries . . . . . . . . . . . . . . 23
Personalizing Your Phone . . . . . . . . . . . . . . . . . . . . . 24
Personalizing a Ring Style . . . . . . . . . . . . . . . . . . . . 24
Activating Ringer IDs. . . . . . . . . . . . . . . . . . . . . . . . . 24
Setting Ringer or Keypad Volume . . . . . . . . . . . . . . . 24
Setting Reminders. . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Setting a Personal Greeting . . . . . . . . . . . . . . . . . . . 24
4
Setting Display Text . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the Clock View . . . . . . . . . . . . . . . . . . . . . .
Showing or Hiding Menu Icons. . . . . . . . . . . . . . . . . .
Personalizing Soft Keys and Menu Icons . . . . . . . . . .
Setting the Menu View . . . . . . . . . . . . . . . . . . . . . . . .
Personalizing the Menu . . . . . . . . . . . . . . . . . . . . . . .
Setting the Menu Language . . . . . . . . . . . . . . . . . . . .
Setting Menu Scroll Behavior . . . . . . . . . . . . . . . . . . .
Resetting All Options . . . . . . . . . . . . . . . . . . . . . . . . .
Clearing All Stored Information . . . . . . . . . . . . . . . . .
Creating and Using Shortcuts . . . . . . . . . . . . . . . . . .
Getting More Out Of Your Phone . . . . . . . . . . . . . . . .
Making a Conference Call . . . . . . . . . . . . . . . . . . . . .
Forwarding Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Barring Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TTY Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Fixed Dialing. . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Service Dialing . . . . . . . . . . . . . . . . . . . . . . . . .
Using DTMF Tones. . . . . . . . . . . . . . . . . . . . . . . . . . .
Monitoring Phone Use . . . . . . . . . . . . . . . . . . . . . . . .
Using Handsfree Features . . . . . . . . . . . . . . . . . . . . .
Making Data and Fax Calls . . . . . . . . . . . . . . . . . . . .
Setting Up a Bluetooth Wireless Connection . . . . . . .
Using Sync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting Network Settings . . . . . . . . . . . . . . . . . . . .
Monitoring Battery Charge . . . . . . . . . . . . . . . . . . . . .
Viewing Phone Specifications . . . . . . . . . . . . . . . . . .
Personal Organizer . . . . . . . . . . . . . . . . . . . . . . . . . . .
Datebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voice Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Locking the SIM Card . . . . . . . . . . . . . . . . . . . . . . . . .
Locking and Unlocking Applications . . . . . . . . . . . . . .
News and Entertainment . . . . . . . . . . . . . . . . . . . . . . .
Micro-Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone Themes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Photos and Pictures . . . . . . . . . . . . . . . . . . . . .
Using Video Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Games and Applications. . . . . . . . . . . . . . . . . . . . . . .
Editing Sounds with MotoMixer . . . . . . . . . . . . . . . . .
Creating Ring Tones . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SIM Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24
24
25
25
25
25
25
25
25
25
25
27
27
27
27
28
28
28
28
29
29
30
32
33
33
35
35
36
36
38
38
39
41
41
41
42
42
43
44
44
45
46
47
48
48
49
52
Messages
You can send and receive messages containing
a variety of media objects, including text,
photos, pictures, animations, sounds, voice
records, and video clips.
Option
Email Gateway
Setting Up the Message Inbox
You must set up your message inbox before you can send
and receive messages.
SMS Alert
Find the Feature
M > Messages
M > Message Setup
To set up the message inbox, you must configure the
following settings. Actual field names and values may vary
depending on the technologies available to your service
provider. Some settings may not be available for all phone
models.
Option
MMS Message Setup
Description
Set up the following Multimedia
Messaging Service (MMS)
features:
• Hide Fields: Specify which fields are hidden when
composing a multimedia message or letter.
• Autosignature: Create a signature you can append to
outgoing multimedia messages and letters.
• Filter: Reject incoming multimedia messages and
letters from specific senders.
• Expire After: Number of days your network should
attempt to send undelivered multimedia messages
and letters.
• Reply Type: Standard type of reply to send to a
received MMS message—(SMS) short text
message, multimedia message, or multimedia letter.
• Size Limit: Maximum size of incoming multimedia
message to be downloaded to your phone.
• Server Info: Select the server you want to use
(information may be viewable only).
Inbox View
Display sender or subject
information with a multimedia
message or letter.
Srvce Center No
Number of the service center
that handles your outgoing text
messages.
Auto Cleanup
Specify the number of days you
want to keep messages in the
inbox, or number of messages
you want to keep.
Sending a Text Message
You can send an SMS text message to other
wireless phone users, and to email addresses.
Find the Feature
Messages
Note: Usually, your service provider has already set up the
message inbox for you.
Description
Port number for the email
gateway that handles your
outgoing email messages
(required to send a text
message to an email address).
Activate or deactivate reminders
and alerts for Short Message
Service (SMS) text messages
that you receive during a call.
M > Messages
> Create Message
> New Short Msg
Press
1 keypad keys
To
enter the text message
or
INSERT (+)
2 OK (+)
3 S
insert a quick note, picture,
animation, sound, or contact
information
store the message
scroll to a Send To option:
Highlight [One Time Entry] to
enter 1 or more phone
numbers and/or email
addresses.
Highlight [New Phonebook Entry]
to enter a number/address
and add it to the phonebook
4 SELECT (+)
Or highlight an existing
phonebook entry.
select [One Time Entry] or
[New Phonebook Entry]
or
ADD (+)
5 DONE (-)
6 CHANGE (-)
add a phonebook entry to the
recipients list
store the numbers/addresses
select Subject
7 keypad keys
enter the subject
5
Press
8 OK (+)
9 SEND (+)
To
store the subject
send the message
5 S
or
Messages
M
send the message later, view
message details, save the
message in the drafts folder,
or cancel the message
Sending a Quick Note Text
Message
Quick notes are prewritten text messages that
you can send quickly (for example, On my way).
You can also create new quick notes.
Find the Feature
Press
1 S
2 READ (+)
M > Messages > Quick Notes
open the Quick Note Menu to
perform other procedures
Description
Create a new quick note.
Edit the quick note.
Delete the quick note.
Open a new message with the
quick note in the Msg field.
Sending a Multimedia Message
An MMS multimedia message contains one or
more slides with text and embedded media
objects, synchronized in a single presentation.
You can send the message to other wireless
phone users, and to email addresses.
Tip: The layout of all slides is determined by the layout of
the first slide to contain both text and a picture or video
clip. Place the cursor in the first half of the slide text to
insert a picture or video clip above the text. Place the
cursor in the second half of the slide text to insert a picture
or video clip below the text.
Find the Feature
M > Messages
> Create Message
> New Multimedia Msg
Press
1 keypad keys
2 M
3 S
6
7 S
8 SELECT (+)
9 M
10 S
11 SELECT (+)
12 S
13 SELECT (+)
To
enter slide text
open the MMS Menu
scroll to Insert
To
display a list of items you can
insert
scroll to Picture, Voice Record,
Sound, Soundtrack, or Video
select the file type
highlight the file you want
insert the file
To add another slide to the
message, continue to step 9.
open the MMS Menu to insert a
new slide
scroll to Insert
display a list of items you can
insert
scroll to New Page
insert a new slide after the
current slide
Repeat steps 1 to 8 to enter
contents for the new slide.
read the quick note
The Quick Note Menu can include the following options:
Option
New
Edit
Delete
Send
6 SELECT (+)
To
scroll to the quick note
or
M
Press
4 SELECT (+)
To edit the multimedia message, press M to open the
MMS Menu. The MMS Menu can include the following options:
Option
Insert
Delete Audio
Delete Page
Preview
Set Page Timing
Next Page
Previous Page
Entry Mode
Entry Setup
Description
Insert a Picture, Voice Record, Sound,
Soundtrack, Video, New Page, Quick Note,
or MMS Template.
Delete the sound file attached to
the current slide.
Delete the current slide.
Play the multimedia message.
Set the number of seconds each
slide is displayed.
Advance to next slide.
Go back to previous slide.
Select the text entry method.
Set primary and secondary text
entry methods.
When you finish composing the multimedia message:
Press
1 OK (+)
2 S
To
store the message
scroll to a Send To option:
Highlight [One Time Entry] to
enter 1 or more phone
numbers and/or email
addresses.
Highlight [New Phonebook Entry]
to enter a number/address
and add it to the phonebook.
or
ADD (+)
4 DONE (-)
5 S
6
7
8
9
CHANGE (-)
keypad keys
OK (+)
CHANGE (-)
10 S
11 SELECT (+)
12 S
13 SELECT (+)
14 BACK (-)
15 S
16 CHANGE (-)
17 ADD (+) or
REMOVE (+)
18 DONE (-)
19 SEND (+)
add a phonebook entry to the
recipients list
store the numbers/addresses
scroll to Subject
select Subject
enter the subject
store the subject
select Attachments
scroll to Picture, Sound, or Video
select the file type
highlight the file you want
attach the file
return to the message editor
scroll to Receipt
select Receipt
activate/deactivate the
delivery report
return to the message editor
send the message
or
M
send the message later, view
message details, save the
message in the drafts folder,
or cancel the message
Using MMS Templates
MMS templates are multimedia message
templates with preloaded media content. You
can select an MMS template and use it as you
would a multimedia message.
Find the Feature
M > Messages
> MMS Templates
Sending a Multimedia Letter
An MMS letter can contain media objects
inserted within a text message, and/or media
objects attached to the message. You can send
the letter to other wireless phone users, and to
email addresses.
Find the Feature
M > Messages
> Create Message
> New Letter
Press
keypad keys
To
enter text for the letter
Messages
3 SELECT (+)
Or highlight an existing
phonebook entry.
select [One Time Entry] or
[New Phonebook Entry]
If a media object in a template cannot be edited, you will
be unable to highlight the object.
or
INSERT (+)
insert a quick note, media
object, voice record, or
contact info
You can insert media objects into the letter as you type it.
Photos, pictures, and animations display in the letter.
Sounds and video clips are represented by a sound file or
video clip indicator.
To insert a media object at the cursor location:
Press
1 M
2 S
3 SELECT (+)
4 S
5 SELECT (+)
6 S
7 SELECT (+)
To
open the Msg menu
scroll to Insert Options
display a list of items you can
insert
scroll to Quick Note, Picture,
Sound, Video, Voice Record, or
Contact Info
select the file type
highlight the file you want
insert the file
To edit the multimedia letter, press M to open the Msg
menu. The Msg menu can include the following options:
Option
Insert Options
Copy Text
Description
Insert a Quick Note, Picture, Sound,
Video, Voice Record, or Contact Info.
Copy some letter text.
Position the cursor at the start
location, press START (+),
highlight the text, then press
COPY (+).
7
Messages
Option
Cut Text
Description
Cut some letter text.
Copy All Text
Cut All Text
Paste
Position the cursor at the start
location, press START (+),
highlight the text, then press
CUT (+).
Copy all letter text.
Cut all letter text.
Paste copied or cut text at the
cursor location.
Select the text entry method.
Set primary and secondary text
entry methods.
Entry Mode
Entry Setup
When you finish composing the letter:
Press
1 OK (+)
2 S
To
store the letter
scroll to a Send To option:
Highlight [One Time Entry] to
enter 1 or more phone
numbers and/or email
addresses.
Highlight [New Phonebook Entry]
to enter a number/address
and add it to the phonebook
3 SELECT (+)
Or highlight an existing
phonebook entry.
select [One Time Entry] or
[New Phonebook Entry]
or
ADD (+)
4 DONE (-)
5 S
6
7
8
9
CHANGE (-)
keypad keys
OK (+)
CHANGE (-)
10 S
11 SELECT (+)
12 S
13 SELECT (+)
14 BACK (-)
15 S
16 CHANGE (-)
17 ADD (+) or
REMOVE (+)
8
add a phonebook entry to the
recipients list
store the numbers/addresses
scroll to Subject
select Subject
enter the subject
store the subject
select Attachments
scroll to Picture, Sound, or Video
select the file type
highlight the file you want
attach the file
return to the message editor
scroll to Receipt
select Receipt
activate/deactivate the
delivery report
Press
18 DONE (-)
19 SEND (+)
To
return to the message editor
send the message
or
M
send the message later, view
message details, save the
message in the drafts folder,
or cancel the message
Viewing the Status of Sent
Messages
Messages that you send are stored in the outbox.
Find the Feature
M > Messages > Outbox
Messages in the outbox are sorted from newest to oldest.
The following indicators show message status:
á = sending in progress
m = sending failed
Y = sent
For additional information, highlight a message and press
M > Message Status.
Tips For Sending Messages
• Press M to select a text entry method when you
enter message text.
• When you enter a text message, a counter at the top
of the display switches between the number of pages
you have written (preceded by a *), and the number of
characters left on the current page. Network charges
are based on the number of pages sent.
• When you enter a multimedia message or letter, a
counter at the top of the display shows the current
message or letter size in bytes/kilobytes. Network
charges are based on the size of the message/letter.
• When you manually enter phone numbers and/or
email addresses in the To field, you must insert a
space between each entry. Press S to the right to
insert a space between each phone number or email
address.
Receiving a Message
When you receive a message, your phone
displays the X (message waiting) indicator and
a New Message notification, and sounds an alert.
Press
READ (+)
To
open the message
If reminders are turned on, your phone sends a reminder
at regular intervals until you close the new message
notification, read the message, or turn off your phone.
When your phone displays Memory is Full!, you must delete
some existing messages from your inbox, outbox, or drafts
folder to receive new messages.
Multimedia messages that you receive can contain
different media objects:
Option
Reply
Reply To All
• Photos, pictures, and animations are displayed as you
read the message.
• A sound file or video clip begins playing when its slide
is displayed. Use the volume keys to adjust the
volume as the sound file or video clip plays.
• Attached files are added to the end of the message.
To open the attachment, highlight the file
indicator/filename and press VIEW (+) (image file
type), PLAY (+) (sound file or video clip), or OPEN (+)
(vObject such as phonebook or datebook entry, or
unknown file type).
Reading, Locking, or Deleting a
Message
Messages in the message inbox are sorted from newest to
oldest. The following indicators show message status:
Y = unread
n = read
f = read and
locked
attachment)
M > Messages
> Message Inbox
Press
1 S
2 READ (+)
Storing an Object From a
Multimedia Message or Letter
To store a media object contained in a
multimedia message or letter, go to the slide
that contains the object, or highlight the object in
the letter, and then:
Press
1 M
2 S
3 SELECT (+)
4 S
5 SELECT (+)
To
scroll to the message
open the message
or
M
Delete
Delete All
Create Message
Setup
ñ = unread (with attachment)
î = read (with attachment)
ó = read and locked (with
The oldest messages are deleted automatically as
specified by the inbox Cleanup setting. If you want to save a
message, you should lock it to prevent it from being
deleted during cleanup.
Find the Feature
Lock or Unlock
Store
open the Message Menu to perform
other procedures
6 S
7 STORE (+)
8 S
The Message Menu can include the following options:
Option
Call Back
Go To
Replay
Description
Call the number in the message
header or embedded in the
message.
Launch the micro-browser and go
to a Web address (URL)
embedded in the message.
Replay a multimedia message.
Messages
Note: In a multimedia letter, you may have to highlight
an indicator embedded in the text to play a sound file
or video clip.
Forward
Description
Open a new message, with the
sender’s number or email address
in the To field.
Open a new message, with the
sender’s number/address in the To
field, and all other recipients listed
in the Cc field.
Open a copy of the message, with
an empty To field.
Lock or unlock the message.
Display a list of storable items,
including inserted and attached
files, and the sender’s number or
email address.
Delete the message.
Delete all inbox messages.
Open a new message.
Open the message inbox setup
menu.
9 SELECT (+)
To
open the Message Menu
scroll to Store
display a list of storable items
scroll to File
display the name of the
object(s) in the current slide,
or the name of the highlighted
object in the letter
highlight the object filename,
if necessary
view storage options
scroll to Store Only,
Apply as Wallpaper,
Apply as Screen Saver,
Apply as Ring Tone, or
Apply as Power Up Animation (only
options appropriate to the file
type are listed)
perform the storage option of
your choice
9
Reading Browser Messages
Your network’s Web server can send you
browser messages that you can read in your
micro-browser.
When you receive a browser message, your
phone displays the X (message waiting) indicator and a
New Browser Message notification, and sounds an alert.
Messages
Press
GO TO (+)
To
launch the micro-browser and
view the message
Press
5 S
6 BACK (-)
7 CHANGE (+)
8 keypad keys
9 OK (+)
or
EXIT (-)
close the new message
notification
10 CHANGE (+)
11 S
To view your browser messages at any time:
Find the Feature
M > Messages
> Browser Msgs
Press
1 S
2 SELECT (+)
To
scroll to a message
12 SELECT (+)
13 CHANGE (+)
14 S
open the message
Reading Information Service
Messages
Information service messages are broadcast
messages that you can receive, such as stock
updates or news headlines.
Setting Up the Information Services
Message Inbox
15 DONE (-)
16 CHANGE (+)
17 S
You must set up your information services message inbox
before you can receive information services messages.
Note: Usually, your service provider has already set up the
information services message inbox for you.
Find the Feature
Press
1 CHANGE (+)
2 S
3 SELECT (+)
4 SELECT (+)
10
M > Messages
M > Info Srvc Setup
To
change the Service setting
scroll to Yes or No to turn cell
broadcasts on or off
Note: Your phone may
provide an additional
Browser Services option on this
menu (see page 43).
select the service setting
select Active Channels to set the
subscription channels
18 DONE (-)
To
scroll to an active channel
that you want to disable, or
scroll to [New Channel] to add a
new channel
return to the cell broadcast
menu when you are finished
setting subscription channels
change the Quick View channel
enter the quick view channel
number
store the quick view channel
number
change the Save Q.View setting
scroll to Yes or No to set
whether you want to save
single-line quick view
messages in the inbox
store the save setting
change the Languages setting
scroll to Lang2 through Lang4
and set the languages in
which you want to accept cell
broadcasts
Note: You cannot change the
Lang1 setting. Lang1 is the
default phone language set
on the Initial Setup menu.
return to the cell broadcast
menu when you are finished
setting broadcast languages
change the Cleanup setting
scroll to the number of days
you want to keep messages
in the inbox, or the number of
messages you want to keep
save the information services
message inbox settings
Receiving an Information Services
Message
When you receive a lengthy information services
message, your phone displays the X (message waiting)
indicator and a New Message notification, and sounds an
alert.
Press
READ (+)
To
open the message)
If the new message is a short quick view message, it
displays in your screen (see page 11).
If reminders are turned on, your phone sends a reminder
at regular intervals until you close the new message
notification, read the message, or turn off your phone.
When your phone displays Memory is Full!, you must delete
some existing messages from your inbox, outbox, or drafts
folder to receive new messages.
If the message is more than 2 lines, you can press
Save (-) to save it in your information services inbox. To
automatically save quick view messages, see page 10.
Reading, Locking, or Deleting an
Information Services Message
Note: Broadcast or browser services send quick view
messages on quick view channels. To set up a quick view
channel, see page 10.
Messages in the information services message inbox are
sorted from newest to oldest. The following indicators
show message status:
Using AOL® Instant
Messenger™
Y = unread
f = read and locked
n = read
Find the Feature
Press
1 S
2 READ (+)
M > Messages > Info Services
To
scroll to the message
open the message
or
M
Go To
Forward
Lock or Unlock
Store Number or
Store Address
Delete
Delete All
Setup
You need a screen name to sign on to AIM. To set up a
screen name, see http://www.aol.ca/aim.
Tip: If you have a screen name from the following, you can
use it with AIM: AOL, CompuServe2000, My News, AOL
Hometown, or Personal Finance Channel on AOL.com.
Finding Other People Online
open the Info Srvc Menu to
perform other procedures
The Info Srvc Menu can include the following options:
Option
Call Back
Setting Up an AIM Screen Name
Messages
The oldest messages are deleted automatically as
specified by the inbox Cleanup setting. If you want to save a
message, you should lock it to prevent it from being
deleted during cleanup.
AOL Instant Messenger (AIM ®) lets you
exchange short messages, in real time, with
other users who are signed on to AIM from their
phones or PCs.
Description
Call the number in the message
header or embedded in the
message.
Launch the micro-browser and go
to a Web address (URL)
embedded in the message.
Open a copy of the message, with
an empty To field.
Lock or unlock the message.
Open a new phonebook entry with
the message’s embedded number
or email address in the No. or Email
field.
Delete the message.
Delete all inbox messages.
Open the information services
message inbox setup menu.
Read and Save a Quick View Message
Quick view messages are short information service
messages that display in your screen. Your phone alerts
you when you receive a new quick view message.
Action
Read the quick view message, then press O to
delete it.
To find out who else is online, sign on and check your
Buddy List ®:
Find the Feature
Press
1 keypad keys
2 OK (+)
3 keypad keys
4 OK (+)
5 S
6 SELECT (+)
M > AIM > Sign On
To
enter your Screen Name
submit your Screen Name
enter your Password
(case-sensitive)
submit your Password
Tip: To sign on automatically
next time, scroll to
Settings > Auto Sign On after you
submit your password.
scroll to Buddy List
view the Buddy List
Your Buddy List is sorted by online status:
• Conversations display first. These are online AIM users
having active conversations with you. Press VIEW (+)
to open your conversation with them.
• Online Buddies are signed on to AIM. An $ (away)
indicator shows if someone is away (see page 12).
Press SEND IM (+) to send the person a message.
• Offline Buddies are signed off of AIM. A % (declined
message) indicator shows that you have declined
messages from a person (see page 12). An & (alert)
indicator shows that you have set an alert for the
person (see page 12). You can press SEND IM (+) to
send a message, in case the person has signed on
since you refreshed your list.
11
Note: To refresh your Buddy List, press M > Refresh List
while viewing the list.
Setting Up AOL Instant Messenger
Adding and Removing Buddies
Sending and Receiving Instant Messages
After you open your Buddy List to find people online, you
can exchange messages.
Press
1 S
2 SEND IM (+)
To
scroll to a name on your
Buddy List
start a conversation with the
person
Messages
or
VIEW (+)
3 keypad keys
4 SEND (+)
open a conversation in
progress
Press WRITE (+) to enter new
text.
enter message text
send the message
Your phone displays the conversation history, where you
can see the text you sent and the person’s replies as they
arrive. In the conversation display, you can:
Press
WRITE (+)
BACK (-)
O
M > Get Buddy Info
M > Add Buddy
M > End Conversation
M > Decline IMs
To
enter and send more text
return to the Buddy List,
where you can open more
conversations
Note: You can have up to
5 open conversations.
return to the home screen,
without signing off of AIM or
closing the conversation
Note: Your phone displays
# New IM if you receive a
message while on the
home screen or in another
application.
view the screen name and
online status of the person
in this conversation
add the screen name to
your Buddy List
end the conversation
block messages from the
screen name for the
current session
Note: If you sign off of AIM, you can still view the
conversation text by pressing M > AIM > Offline Convs. from
the home screen. Turning off your phone erases the
conversations.
12
Your Buddy List can contain 30 names.
To add a name, open your Buddy List or a conversation and
press M > Add Buddy. If you are not in a conversation,
enter the new screen name and press OK (+). AIM returns
an error if it cannot verify the name on the server.
To remove a name from your Buddy List, highlight the name
and press M > Remove Buddy.
Tip: To send a message to someone not on your Buddy List,
open the list and press M > Send IM To...
Declining Buddies
To decline messages from someone on your Buddy List,
highlight the name and press M > Decline IMs. This setting
remains active until you sign off of AIM.
Setting an Alert for Offline Buddies
To receive notification when someone signs on to AIM,
highlight the name in your Buddy List and press
M > Alert Me.
Setting Your Away Message
If you are signed on to AIM but not responding to new
messages, you can set the F (away) indicator to display
next to your name in everyone else’s Buddy List. From the
AIM Online menu, select Away Message > On or Off.
Note: The AIM Online menu displays when you sign on, and
when you press BACK (+) from your Buddy List.
Setting Your AIM Alert
AIM plays an alert when new messages arrive, or when a
person for whom you have set an alert signs on to AIM.
To turn off the AIM alert, select Settings > Set Sounds from the
AIM Online menu.
Changing Your Password
To change the password for your sign-on name, select
Settings > Change Password from the AIM Online menu.
Signing Off of AIM
To sign off, select Sign Off from the AIM Online menu.
Email
You can send and receive email messages with
your wireless phone.
Setting
Cleanup
Setting Up the Email Inbox
You must set up your email inbox before you can send and
receive email messages.
Save on server
Find the Feature
M > Messages
M > Email Msg Setup
To set up the email inbox, you must configure the following
settings. Actual field names and values may vary
depending on the technologies available to your service
provider. Some settings may not be available for all phone
models.
Notification
Check new msgs
Setting
ISP settings
Description
Connection type: Select CSD or GPRS.
Dial-Up Number: Phone number for
a CSD connection.
APN address: Access point name
for a GPRS connection.
User name: User name for
specified connection.
Password: Password for specified
connection.
Email provider
Protocol
User ID
Password
Sending host
Sending port
Receiving host
Receiving port
Return address
Name
DNS IP: Address of DNS server for
specified connection.
Select your email provider, or
select Custom to manually enter
Protocol, Sending host, Sending port,
Receiving host, and Receiving port.
Select protocol to communicate
with receiving host: POP3 or IMAP4.
Your user ID.
Your user password.
IP address or host name that
handles your outgoing email.
Port number for sending host.
IP address or host name that
handles your incoming email.
Port number for receiving host.
Your email address.
Name to be inserted before the
return address, if desired.
Hide fields
Auto signature
Security
Size restriction
Unread only
Receive Date Range
Attachments
Email
Note: Usually, your service provider has already set up the
email inbox for you.
Description
Number of days you want to
keep messages in the inbox, or
number of messages you want
to keep.
Select Yes to save copies of your
email messages on the remote
server. (For POP3, prevents
message deletion on remote
server after message is
downloaded to your phone. For
IMAP4, prevents message
deletion on remote server after
message is deleted on your
phone.)
Select On to be notified when you
receive a new email message.
Interval at which your phone
automatically receives new
email messages in the
background mode.
Select No if you want to only
manually Send/Receive Mail (see
page 15).
Hide fields (cc and/or bcc) when
composing an email message.
Signature to be appended to
your outgoing email messages.
Use SSL for sending: Select Yes to
setup SSL connection with
sending host.
Warnings in Background: Select to
proceed or break connection if
SSL warning displays when
receiving messages in
background.
Maximum size of an email
message to be downloaded to
your phone.
Select Yes to receive unread
messages only (IMAP4 only).
Filter to receive messages from
specified time period (IMAP4
only).
Filter to receive only attached
files of specified type (Graphic or
Music) or not to receive attached
files (IMAP4 only).
13
Sending an Email Message
You can send an email message to 1 or more recipients.
You can manually enter each recipient’s email address, or
select addresses from the phonebook.
When you manually enter email addresses, you must
insert a comma, semicolon, or colon between each
address.
Find the Feature
M > Messages
Email
> Create Message
> New Email
Press
keypad keys
2 S
3 SELECT (+)
4 S
5 SELECT (+)
6 S
7 SELECT (+)
or
To
open the Email Menu
scroll to Insert Options
display a list of items you can
insert
scroll to Quick Note, Picture,
Sound, Video, Voice Record, or
Contact Info
select the file type
highlight the file you want
insert the file
When you finish composing the email message:
Press
1 OK (+)
2 keypad keys
To
store the message
enter one or more email
addresses
or
PH.BOOK (+)
3 OK (+)
4 S
5 CHANGE (-)
6 keypad keys
14
14 S
15 CHANGE (-)
insert a quick note, media
object, voice record, or
contact info
To insert a media object at the cursor location:
1 M
11 S
12 SELECT (+)
13 BACK (-)
16 S
17 SELECT (+)
18 SEND (+)
You can insert media objects into the email message as
you type it. Photos, pictures, and animations display in the
message. Sounds and video clips are represented by a
sound file or video clip indicator.
Press
9 S
10 SELECT (+)
To
enter text for the message
or
INSERT (+)
Press
7 OK (+)
8 CHANGE (-)
select addresses from the
phonebook
store the addresses
If desired, scroll to the Cc and
Bcc fields and press
CHANGE (-) to add addresses
to those fields
scroll to Subject
select Subject
enter the subject
M
To
store the subject
select Attachments
scroll to Picture, Sound, or Video
select the file type
highlight the file you want
attach the file
return to the message editor
scroll to Priority
select Priority
scroll to Normal or Urgent
set the priority
send the message
send the message later, view
message details, save the
message in the drafts folder,
or cancel the message
Viewing the Status of Sent
Email Messages
Email messages that you send are stored in the outbox.
Find the Feature
M > Messages > Outbox
Messages in the outbox are sorted from newest to oldest.
The following indicators show message status:
Y = sent
m = sending failed
Receiving an Email Message
Email messages that you receive are stored on your
service provider’s email server until you download them to
your phone.
If your phone is set up to check periodically for new email
messages, your phone displays the X (message waiting)
indicator and a New Message notification, and sounds an alert
when you receive an email message.
Press
READ (+)
To
open the message
If reminders are turned on, your phone sends a reminder
at regular intervals until you close the new message
notification, read the message, or turn off your phone.
When your phone displays Memory is Full!, you must delete
some existing messages from your inbox, outbox, or drafts
folder to receive new messages.
Tip: New email messages are completely downloaded to
your phone. With the IMAP4 protocol, if message size is
greater than the Size restriction setting, the email message
header is downloaded instead. While downloading a series
of messages, you can press END (+) to end the connection
with the email server when downloading of currently
transferred message is complete. Press END (+) a second
time to end the connection immediately.
Reading, Locking, or Deleting
an Email Message
Messages in the email inbox are sorted from newest to
oldest. The following indicators show message status:
Y = unread
d = unread and
urgent
locked
attachment)
î = read (with attachment)
ó = read and locked (with
attachment
The oldest messages are deleted automatically as
specified by the inbox Cleanup setting. If you want to save a
message, you should lock it to prevent it from being
deleted during cleanup.
Note: If you create personal folders, the email inbox lists
folders first. Messages are located inside the folders.
Find the Feature
Press
1 S
2 READ (+)
3 BACK (-)
M > Messages > Email Msgs
To
scroll to the message
open the message
close the message
or
REPLY (+)
Manually Sending and
Receiving Email
If your phone is not set up to check periodically for new
email messages, you must manually connect to your email
service provider to send and receive email.
Find the Feature
Press
1 YES (+)
2 S
3 READ (+)
Press
1 S
2 CALL (+)
open the Email Msg Menu to
perform other procedures
M > Messages > Email Msgs
M > Send/Receive Mail
To
connect to your email service
when you see Connect Now?
scroll to the message
open the message
Calling a Phone Number in an
Email Message
compose and send a reply
or
M
Folder
Email Msg Setup
Description
Open a new email message.
Connect to your email service
provider to send and receive new
email.
Create or modify personal folders.
Open the email inbox setup menu.
Email
n = read
f = read and
ñ = unread (with attachment)
ï = unread and urgent (with
Option
Create Email
Send/Receive Mail
To
highlight the phone number in
the message
call the number
Sending Email to an Embedded
Email Address
The Email Msg Menu can include the following options:
Option
Reply
Reply All
Forward
Lock or Unlock
Move To
Store
Delete
Delete All
Description
Open a new email message, with
the sender’s email address in the
To field.
Open a new email message, with
all of the original recipients’ email
addresses in the appropriate
fields (To, cc). The bcc field is not
copied.
Open a copy of the email
message, with an empty To field.
Lock or unlock the message.
Move the message to a personal
folder.
Display a list of items that can be
stored, including the sender’s
number or email address.
Delete the message.
Delete all email inbox messages.
Press
1 S
2 MAIL TO (+)
To
highlight the address in the
message
open a new email message,
with the email address in the
To field
Going to a Web Address in an
Email Message
Press
1 S
2 GO TO (+)
To
highlight the Web address
(URL) in the email message
Note: The URL must be
underlined in the message.
launch the micro-browser and
go to the URL
15
Creating Personal Folders
You can create up to 5 personal folders to help organize
your email. The email inbox lists the inbox folder first,
followed by your personal folders in alphabetical order.
Find the Feature
Email
Press
1
2
3
4
M > Messages > Email Msgs
M > Folder
S
To
scroll to Create
SELECT (+)
keypad keys
OK (+)
select the option
enter the folder name
save the folder
Moving Email to a Personal
Folder
Find the Feature
Press
1 S
2 M
3 S
4 SELECT (+)
5 S
6 SELECT (+)
7 YES (-)
M > Messages > Email Msgs
To
scroll to the email message
open the Email Msg Menu
scroll to Move to
view the personal folders list
scroll to the folder
select the folder
move the email message
Renaming a Personal Folder
Find the Feature
Press
1 S
2 SELECT (+)
3 S
4 SELECT (+)
5 YES (+)
6 keypad keys
7 OK (+)
M > Messages > Email Msgs
M > Folder
To
scroll to Rename
view the personal folders list
scroll to the folder
select the folder
confirm that you want to
rename the folder
enter the new folder name
save the folder
Deleting a Personal Folder
Find the Feature
Press
1 S
2 SELECT (+)
3 S
4 SELECT (+)
5 YES (-)
16
M > Messages > Email Msgs
M > Folder
To
scroll to Delete
view the personal folders list
scroll to the folder
select the folder
delete the folder
Setting Up Your Phonebook
You can store a list of names and phone numbers or email
addresses in your phone’s electronic phonebook.
phonebook entry. All other information is optional. You can
enter the following information for a phonebook entry.
To see the names in your phonebook, press
M > Phonebook from the home screen. Scroll to a name
and press VIEW (+) to view the following details for the
phonebook entry.
Option
Name
Description
Specify the entry name.
Phone Number
or Email
Address
Category
Tip: Press M to select a text
entry method.
Set the category to which the
entry belongs (Business, Personal,
General, or VIP).
Voice Name
indicator
indicates a
recorded voice
name.
Entry Name
(
yÉ
$*Carlo Emrys
212-555-1212
Speed No.15# (P)
Category:General
Ringer ID:Continental
Picture:None
M
EDIT
Press M
to open
Phonebook
Menu.
(P) indicates
entry stored in
phone memory,
(S) indicates
SIM memory.
No. or Email
Edit entry.
Type
Note: Entries stored on the SIM card do not have Category,
Type, Voice Name, Ringer ID, or Picture information.
Creating a Phonebook Entry
Store To
To store a phone number or email address in the
phonebook:
Voice Name
Find the Feature
M > Phonebook
M > New > Phone Number or
Email Address
Shortcut: Enter a phone number in the home screen, then
press STORE (+) to create a phonebook entry with the
number in the No. field.
You can store an entry on your phone or on the SIM card.
A phone number or email address is required for a
Speed No.
Ringer ID
Note: The Category option is not
available for entries stored on the
SIM card.
Specify the entry’s phone number
or email address (maximum 32
characters).
Set the entry type.
Note: The Type option is not
available for email entries, or for
entries stored on the SIM card.
Set the entry’s physical storage
location (Phone or SIM).
Record a voice name for the entry.
Note: The Voice Name option is not
available for entries stored on the
SIM card.
Change the default speed dial
number for the entry, if desired.
Set a distinctive ringer alert for the
entry.
Setting Up Your Phonebook
Type indicator
shows number
type:
$ = work
U = home
BACK
S = main
h = mobile Return to
list.
Z = fax
p = pager
[ = email
You can set the phonebook to
display all entries, or display only
entries in a specified category
(see page 20).
Speed Dial
Number
Your phone sounds the ringer
alert when you receive a call from
this phone number. To activate
ringer IDs, see page 24.
Note: The Ringer ID option is not
available for entries stored on the
SIM card.
17
Option
Picture
Description
Assign a picture caller ID photo or
picture to the entry.
Your phone displays the picture
when you receive a call from this
phone number.
MORE
the dialing sequence to ensure that the number dials and
connects properly:
Press
M > Insert Pause
Your phone dials the
preceding digits, waits for the
call to connect, then dials the
remaining digit(s).
Note: The Picture option is not
available for entries stored on the
SIM card.
Create another entry under the
same Name.
You must use a different Type
identifier for each number.
M > Insert Wait
When you are finished entering information, press
DONE (-) to store the entry.
Creating a Group Mailing List
M > Insert 'n'
Setting Up Your Phonebook
You can create a group mailing list consisting of multiple
phone numbers and email addresses previously stored in
the phonebook. Mailing lists make it easy for you to send a
text message to multiple recipients simultaneously.
Find the Feature
Option
Name
Members
Voice Name
Speed No.
Description
Specify the mailing list name.
Tip: Press M to select a text
entry method.
Open the list of phonebook entries
that you can add or remove from
the mailing list.
Record a voice name for the
mailing list.
Change the default speed dial
number for the mailing list, if
desired.
When you are finished entering information, press
DONE (-) to store the mailing list as a phonebook entry.
Storing a PIN Code With a
Phone Number
You can store a PIN code with the phone number for calls
that require additional digits (for example, to make a calling
card call, or to retrieve voicemail or answering machine
messages). Insert 1 or more of the following characters in
Note: If your phone does not
recognize the first pause
character, try 2 (pp).
insert a w (wait) character
Your phone dials the
preceding digits, waits for the
call to connect, then prompts
you for confirmation before it
dials the remaining digit(s).
insert an n (number)
character
Your phone prompts you for a
number before dialing the
call. The number you enter is
inserted into the dialing
sequence in place of the n
character.
M > Phonebook
M > New > Mailing List
A name is required for a mailing list entry. The mailing list
must contain at least 1 member. You can enter the
following information for a mailing list entry.
To
insert a p (pause) character
Notes:
• You can store a maximum of 32 digits for a phonebook
entry stored on the phone. The maximum number
may vary for entries stored on the SIM card. Each
character counts as 1 digit.
• You cannot store a number that contains a w or n
character on the SIM card.
Recording a Voice Name For a
Phonebook Entry
You can record a voice name for a new or existing
phonebook entry. A voice name lets you call the
phonebook entry using voice dial.
Note: You cannot record a voice name for an entry stored
on the SIM card.
Tip: Make your recording in a quiet location. Hold the
phone about 4 inches (10 centimeters) from your mouth,
and speak directly into the phone in a normal tone.
Find the Feature
M > Phonebook
Action
1 Press S to scroll to the entry.
2 Press VIEW (+) to view entry details.
3 Press EDIT (+) to edit the entry.
4 Press S to scroll to Voice Name.
5 Press RECORD (+) to begin recording.
18
Action
6 Press and release the voice key and say the
entry’s name (within 2 seconds) to record the
voice name.
7 When prompted, press and release the voice key
and repeat the name.
8 Press DONE (-) to store the voice name.
To dial a dialing sequence stored as multiple phonebook
entries:
1
Dialing a Phonebook Entry
2
3
Use 1 of the following procedures to call a number (or send
a text message to an email address or mailing list) stored
in your phonebook.
4
Action
Dial the first phonebook entry. Perform any
pause or wait tasks, if necessary, to complete the
dialing sequence. Your phone returns to the
home screen.
Press M > Phonebook to reopen the phonebook.
Highlight the second phonebook entry, then
press M > Send Tones to send the next portion of
the dialing sequence.
Repeat steps 2 and 3 as necessary to send the
entire dialing sequence.
Phonebook List
Find the Feature
M > Phonebook
Press
To
1 keypad key letter jump to entries that begin
with that letter (optional)
scroll to the entry
2 S
3
N
Editing a Phonebook Entry
Find the Feature
Press
2 VIEW (+)
3 EDIT (+)
Tip: Press M to open the
Phonebook Menu to perform
various procedures on the
entry.
view entry details
edit the entry
Voice Dial
Storing Longer Numbers
Deleting a Phonebook Entry
A phonebook number can contain a maximum of 32 digits
and characters. You can create multiple phonebook entries
to store a dialing sequence that exceeds the 32-character
limit. Then you can send the entries in sequence to dial the
number.
Find the Feature
To store a dialing sequence longer than 32 characters:
3 S
4 SELECT (+)
5 YES (-)
Action
1 Create a phonebook entry to store the first part
of the dialing sequence (for example, the number
for your long-distance service provider).
2 Create a second phonebook entry to store the
next part of the dialing sequence (for example,
the country code and phone number for an
international call).
3 Repeat step 2 as necessary to store the entire
dialing sequence. (For example, create a third
phonebook entry to store your calling card
number and PIN number.)
Press
1 S
2 M
M > Phonebook
To
scroll to the entry
open the Phonebook Menu
scroll to Delete
select Delete
confirm the deletion
Setting Up Your Phonebook
1 S
To
scroll to the entry
make the call
Press and release the voice key and say the entry’s voice
name (within 2 seconds).
M > Phonebook
Setting the Phonebook List
View
You can view phonebook list entries as a single line of text,
or view each entry by its name, number, and picture caller
ID photo.
Find the Feature
Press
1 M
2 S
3 SELECT (+)
4 S
5 CHANGE (+)
6 S
7 SELECT (+)
M > Phonebook
To
open the Phonebook Menu
scroll to Setup
select Setup
scroll to View by
select View by
scroll to List or Picture
select the list view
19
Sorting the Phonebook List
You can sort your phonebook list by name (the standard),
speed dial number, voice name, or email address.
Note: The voice name sort is identical to the name sort,
except that the entries with voice name tags display first.
Find the Feature
Press
1 M
2 S
3 SELECT (+)
4 S
5 CHANGE (+)
6 S
7 SELECT (+)
M > Phonebook
To
open the Phonebook Menu
scroll to Setup
Setting Up Your Phonebook
10 SELECT (+)
11 DONE (-)
Press
1 S
To
change view preference
scroll to Primary Contacts or
All Contacts
select the view preference
set the view preference
Tip: When the phonebook list displays primary numbers
only, you can scroll to a name and press S left or right to
view other numbers associated with the name.
Setting the Primary Number for
a Phonebook Entry
When you enter multiple phone numbers for the same
name, you can specify the primary number.
Press
1 S
2 M
3 S
4 SELECT (+)
5
S
6 SELECT (+)
20
You can view all entries in the phonebook list, or view only
the entries in the category you specify.
select Sort by
scroll to Name, Speed No.,
Voice Name, or Email
select the sort order
To set an entry’s primary phone number, see the following
procedure.
Find the Feature
Setting the Phonebook Category View
Find the Feature
If you select Name, you must specify whether you want to
view all numbers or just the primary number for each
name:
9 S
Using Phonebook Category
Views
select Setup
scroll to Sort by
If you select Speed No., Voice Name, or Email, the procedure is
complete.
Press
8 CHANGE (+)
Depending on how the phonebook list is sorted, the
primary number is listed first, or is the only number that
displays for a phonebook entry.
M > Phonebook
To
scroll to the entry
open the Phonebook Menu
scroll to Set Primary
select Set Primary
scroll to the number you want
to set as the primary number
set the primary number
2 SELECT (+)
3 DONE (-)
M > Phonebook
M > Categories
To
scroll to All, Business, Personal,
General, VIPs, or another
category that you created
select the category view
set the category view
Note: The phonebook category view is reset to All each
time you turn the phone on.
Creating a New Category
Your phone includes several predefined phonebook
categories. You can create additional categories, and
customize the way your phone notifies you of incoming
calls from entries in different categories.
Find the Feature
M > Phonebook
M > Categories
M > New
A name is required for the category. All other information is
optional. You can enter the following information for a
category.
Option
Name
Description
Enter the category name.
Members
Tip: Press M to select a text
entry method
Open the list of phonebook entries
that you can add or remove from
the category.
Option
Ringer ID
Description
Set a distinctive ringer alert for the
category.
Your phone uses the alert to notify
you when you receive a call from
an entry in this category. To
activate ringer IDs, see page 24.
Light ID
Note: A ringer ID for an individual
entry overrides the category alert.
Set a distinctive light pattern for
the category.
Your phone displays the light
pattern when you receive a call
from an entry in this category.
Note: The light ID for a
phonebook category overrides the
default ring lights setting. The light
ID is not displayed when ring
lights are turned off.
Editing a Category
Press
1 S
2 M
3 S
4 SELECT (+)
M > Phonebook
M > Categories
To
scroll to the category
open the Category Details menu
scroll to Edit
edit the category
You can reorder the items in the category list.
Find the Feature
Press
1 S
2 GRAB (+)
3 S
4 INSERT (+)
5 DONE (-)
Notes:
• You cannot edit the All category.
• You cannot edit the name of the General category.
Deleting a Category
Find the Feature
Press
1 S
2 M
3 S
4 SELECT (+)
5 YES (-)
M > Phonebook
M > Categories
You can copy one or more phonebook entries to a new
speed dial location on the phone or SIM card. This
procedure does not delete the original entry.
Note: The SIM card cannot store Category, Type, Voice Name,
Ringer ID, or Picture information. When you copy an entry
from the phone to the SIM card, your phone prompts you
for confirmation before dropping this information and
copying the entry.
Copying a Single Entry
Press
1 S
2 M
3 S
4 SELECT (+)
5 S
6 SELECT (+)
7 S
8 CHANGE (+)
9 S
open the Category Details menu
scroll to Delete
10 SELECT (+)
11 DONE (-)
Notes:
• You cannot delete the All or General categories.
grab the category
move the category to a new
location in the list
insert the category
store the reordered category
list
Copying Phonebook Entries
To
scroll to the category
delete the category
confirm the deletion
To
scroll to a category
Note: You cannot move the All category. All always
remains the first entry in the category view list.
Find the Feature
Edit the category information as described in the previous
section.
M > Phonebook
M > Categories
M > Reorder List
M > Phonebook
To
scroll to the entry
open the Phonebook Menu
scroll to Copy
Setting Up Your Phonebook
Find the Feature
Reordering Categories
select Copy
scroll to Entries
select Entries
scroll to To
select To
scroll to Phone Memory or
Smart Card
select the copy location
copy the entry to the next
available speed dial number
in the selected location
(phone memory or SIM card)
If necessary, press YES (-)
to confirm the copy of a
phone entry to the SIM card.
• When you delete a category, all entries in the category
revert to General.
21
Copying Multiple Entries
Find the Feature
Press
1 S
2 M
3 S
4 SELECT (+)
5 S
6 SELECT (+)
7 CHANGE (+)
8 S
9
ADD (+)
10 DONE (-)
Setting Up Your Phonebook
11 S
12 CHANGE (+)
13 S
14 SELECT (+)
15 DONE (-)
M > Phonebook
Press
6 S
Merge copies all entries to the
next available speed dial
numbers in the selected
location.
To
scroll to an entry you want to
copy
open the Phonebook Menu
scroll to Copy
select Copy
scroll to Entries
select Entries
add more entries
scroll to another phonebook
entry
add the phonebook entry to
the copy list
Repeat steps 8 and 9 to add
more entries to the list
store the entries
scroll to To
select To
scroll to Phone Memory or
Smart Card
select the copy location
copy the entries to the next
available speed dial numbers
in the selected location
(phone memory or SIM card)
If necessary, press YES (-)
to confirm the copy of phone
entries to the SIM card.
Copying All Entries
7
SELECT (+)
Press
1 M
Copying a Phonebook Entry to
Another Device
You can use a Bluetooth wireless connection to copy a
phonebook entry from your phone to another phone,
computer, or hand-held device. For more information, see
page 33.
Checking Phonebook Capacity
You can see how much memory space remains for storing
phonebook and datebook entries on the phone, and how
many more phonebook entries you can store on the SIM
card.
Find the Feature
Press
1 M
2 S
3 SELECT (+)
2 S
3 SELECT (+)
4 S
5 SELECT (+)
select Copy
scroll to All To SIM or All To Phone
select the option
M > Phonebook
To
open the Phonebook Menu
scroll to Phone Capacity or
SIM Capacity
select Phone Capacity or
SIM Capacity
Your phone displays the
phone memory meter, or the
number of SIM card
phonebook entries available.
M > Phonebook
To
open the Phonebook Menu
scroll to Copy
Overwrite replaces all entries
in the destination location.
copy all entries to the
selected location (phone
memory or SIM card)
If necessary, press YES (-)
to confirm the copy of phone
entries to the SIM card.
You can copy all phone entries to the SIM card, or all SIM
card entries to the phone.
Find the Feature
To
scroll to Merge or Overwrite
Setting 1-Touch Dial Preference
You can set 1-touch dial to call the entries in your phone
memory phonebook or the SIM card phonebook.
Find the Feature
M > Settings > Initial Setup
> 1-Touch Dial
Press
1 S
2 SELECT (+)
22
To
scroll to the list you want
select the list
Synchronizing Phonebook
Entries
You can synchronize phonebook entries between
your phone and computer or hand-held device
with BVRP Mobile PhoneTools software, an
accessory for Motorola phones. See the Mobile
PhoneTools user’s guide for more information.
Note: Mobile PhoneTools software is designed to
synchronize with basic features of many popular Personal
Information Management (PIM) software and hardware
products.
If the other device supports Bluetooth™ wireless
connections, you can set up a Bluetooth wireless link with
your phone to synchronize phonebook entries.
Setting Up Your Phonebook
23
Personalizing Your Phone
Personalizing a Ring Style
Setting Reminders
You can change the alerts that notify you of the following
events: incoming calls, text messages, voicemail
messages, data calls, fax calls, alarms, and reminders.
Any changes you make are applied to the current ring
style.
A reminder is an alert that rings or vibrates at regular
intervals to notify you about a message that you have
received.
Find the Feature
M > Settings > Ring Styles
> Style Detail
Note: Style represents the current ring style.
Press
1 S
2 CHANGE (+)
3 S
4 SELECT (+)
To
scroll to the event
select the event
scroll to the alert you want
select the alert
Activating Ringer IDs
When ringer IDs are turned on, your phone uses distinctive
ring tones to notify you of incoming calls or messages from
specific entries in your phonebook.
Note: To assign a ringer ID to a new or existing
phonebook entry, see page 17.
Find the Feature
M > Settings > Ring Styles
> Style Detail > Ringer IDs
Note: Style represents the current ring style.
Personalizing Your Phone
Press
1 S
2 SELECT (+)
To
scroll to On or Off
select the option
You can also set your phone to display a distinctive light
pattern when you receive calls from phonebook entries in
a specific category. To set a light ID for a phonebook
category, see page 20.
Setting Ringer or Keypad
Volume
Find the Feature
M > Settings > Ring Styles
> Style Detail
Note: Style represents the current ring style.
Press
1 S
2 SELECT (+)
3 S left or right
4 OK (+)
24
To
scroll to Ring Volume or Key Volume
select the option
scroll to the desired volume
store the setting
Find the Feature
M > Settings > Ring Styles
> Style Detail > Reminders
Note: Style represents the current ring style.
Press
1 S
2 SELECT (+)
To
scroll to Beep or Vibrate to set
the reminder alert type, or Off
to turn off all reminders
select the reminder alert
Setting a Personal Greeting
Set a personal greeting that displays when you
turn on your phone.
Find the Feature
M > Settings > Personalize
> Greeting
Setting Display Text
Text that displays in the home screen can be left justified or
centered.
Find the Feature
M > Settings > Personalize
> Home Screen > Layout
Press
1 S
2 SELECT (+)
To
scroll to Left Justified or Centered
select the text layout
Selecting the Clock View
You can display an analog clock or a digital time readout in
the home screen.
Find the Feature
M > Settings > Personalize
> Home Screen > Clock
Press
1 S
2 SELECT (+)
To
scroll to Analog or Digital
select the clock view
Showing or Hiding Menu Icons
Setting the Menu Language
Show or hide the menu feature icons that display in the
home screen. When you select Hide, the menu icons are
hidden but remain active in the home screen, and you can
press S to select them as usual.
Set the language in which menu features and options are
displayed.
Find the Feature
M > Settings > Personalize
> Home Screen > Home Keys
> Icons
Press
1 S
2 SELECT (+)
To
scroll to Show or Hide
You can change the menu feature icons and soft key labels
(left - and right +) that display in the home screen, to
access different main menu items from the home screen.
M > Settings > Personalize
> Home Screen > Home Keys
Press
1 S
2 CHANGE (+)
3 S
4 SELECT (+)
To
scroll to Up, Down, Left, Right,
Left Soft Key, or Right Soft Key
select the icon or soft key
scroll to a menu feature
confirm the menu feature
Setting the Menu View
Set your phone to display the main menu as graphic icons
(the default setting) or as a text-based list.
M > Settings > Personalize
> Main Menu > View
Press
1 S
2 SELECT (+)
To
scroll to Icons or List
select the menu view
Personalizing the Menu
You can reorder the items in your phone’s main menu.
Find the Feature
M > Settings > Personalize
> Main Menu > Reorder
Press
1 S
2 GRAB (+)
3 S
4 INSERT (+)
Setting Menu Scroll Behavior
Set the highlight bar to stop or wrap around when you
reach the top or bottom of a menu list.
Find the Feature
M > Settings > Initial Setup
> Scroll
Resetting All Options
Reset all options back to their original factory settings,
except for the unlock code, security code, and lifetime
timer.
Find the Feature
M > Settings > Initial Setup
> Master Reset
Clearing All Stored Information
Reset all options back to their original factory settings,
except for the unlock code, security code, and lifetime
timer, erase all downloaded pictures, animations and
sound files, and clear all user settings and entries, except
for information stored on the SIM card.
Caution: Master clear erases all user-downloaded
content and user-entered information stored in your
phone’s memory, including phonebook and datebook
entries. After you erase the information, you cannot
recover it. Master clear does not delete any information
stored on the SIM card.
Find the Feature
M > Settings > Initial Setup
> Master Clear
Creating and Using Shortcuts
Your phone includes several standard shortcuts. You can
create additional custom shortcuts to frequently used
menu items.
Personalizing Your Phone
Find the Feature
M > Settings > Initial Setup
> Language
select the option
Personalizing Soft Keys and
Menu Icons
Find the Feature
Find the Feature
To
scroll to a menu item
grab the menu item
move the item to a new
location in the menu
insert the menu item
25
Standard Shortcuts
Using a Keypad Shortcut
The following shortcuts are preprogrammed on your
phone. You cannot edit or delete these shortcuts.
Task
Change your phone’s
ringer alert setting.
Shortcut
Open the flip, then press
the down volume key (at
lowest volume setting) to
switch to vibrate call
alert. Press again to
switch to silent call alert.
Press the up volume key
to cycle back to vibrate
alert, then ring alert.
Display your phone
From the home screen,
number.
press M #.
Go to the dialed calls list. From the home screen,
press N.
Exit the menu system.
Press O.
Creating a Shortcut
You can create a keypad shortcut and an optional voice
shortcut to a menu item. A voice shortcut takes you
directly to the menu item when you say the shortcut name.
Tip: Make your recording in a quiet location. Hold the
phone about 4 inches (10 centimeters) from your mouth,
and speak directly into the phone in a normal tone.
Press
1 M
2 a number key
Selecting a Shortcut From the List
Find the Feature
Using a Voice Shortcut
Action
1 Press M to open the menu.
2 Press and release the voice key and say the
shortcut’s name (within 2 seconds) to go to the
menu item with that shortcut name.
Editing or Deleting a Shortcut
The shortcut list is sorted by key. If you change a shortcut’s
key, you change its place in the list.
Find the Feature
Press
1 S
2 M
Personalizing Your Phone
Option
New
6
7
9
Press S to scroll to Voice to assign a voice
shortcut.
Press RECORD (+) to begin recording.
Press and release the voice key and say the
shortcut’s name (within 2 seconds) to record the
shortcut name.
When prompted, press and release the voice key
and repeat the name.
Press DONE (-) to store the shortcut name.
To
scroll to the shortcut
open the Shortcut Menu to
perform various procedures
on the shortcut
Edit
Description
Read instructions on how to
create a new shortcut.
Edit the shortcut.
Reorder List
Delete
Delete All
Tip: Use this option to delete the
associated voice shortcut.
Change the shortcut list order.
Delete the shortcut.
Delete all shortcuts.
Press DONE (-) to select the default number
or
M > Office Tools > Shortcuts
The Shortcut Menu can include the following options:
or
8
26
Press S to scroll to the menu item.
Press and hold M to open the shortcut editor.
Press YES (-) to view shortcut options.
Press CHANGE (+) to change the keypad shortcut
number
M > Office Tools > Shortcuts
> shortcut name
Action
1 Press M to enter the menu system.
2
3
4
5
To
open the main menu
go to the menu item with
that shortcut number
Getting More Out Of Your Phone
Making a Conference Call
Connect an active call and a call on hold so that
all parties can speak to each other.
Press
1 keypad keys
2
To
dial the first party’s number
call the number
N
3 HOLD (+)
(if available) or
M > Hold
4 keypad keys
5
6 LINK (-)
7
O
dial the next party’s number
call the number
connect the 2 calls
end the conference call
Tip: Repeat steps 3 to 6 to add additional parties to the
conference call.
Forwarding Calls
Forward your phone’s incoming voice, fax,
and/or data calls directly to another phone
number.
Setting Up or Canceling Call Forwarding
The forwarding options for voice, fax, or data calls are:
Option
All Calls
If Unavailable
Detailed
Off
Find the Feature
Press
1 S
2 SELECT (+)
3 S
4 CHANGE (+)
5 S
6 SELECT (+)
Description
Forward all calls.
Forward calls if your phone is
unavailable.
Set different forwarding numbers if
you are out of range, unable to
answer, or busy (voice calls only).
Do not forward calls.
M > Settings > Call Forward
To
scroll to the type of calls you
want to forward
Scroll to Cancel All to cancel all
call forwarding.
view call forwarding details
scroll to Forward
7 S
8 CHANGE (+)
9 keypad keys
To
scroll to To (for Detailed
forwarding, scroll to If Busy,
If No Answer, or If Unreachable)
select To
enter the forwarding phone
number
or
BROWSE (+)
10 OK (+)
11 DONE (-)
select a number from the
phonebook or recent calls
lists
store the number
save call forwarding settings
Note: Repeat this procedure to enter forwarding
information for other call types.
Checking Call Forwarding Status
Your network may store call forwarding status for you. To
confirm the network call forwarding settings:
M > Settings > Call Forward
Find the Feature
> Forward Status
Press
1 S
2 View (+)
To
scroll to Voice, Fax, or Data
confirm the network setting
Barring Calls
Getting More Out Of Your Phone
N
put the call on hold.
Press
Use call barring to restrict outgoing or incoming
calls. You can restrict all calls, calls to
international numbers, or calls while roaming.
Find the Feature
M > Settings > Security
> Call Barring
Press
1 S
2 CHANGE (+)
3 S
4 SELECT (+)
5 keypad keys
6 OK (+)
To
scroll to Outgoing or Incoming
calls
select the option
scroll to a restriction setting
select the restriction setting
enter your call barring
password
submit your password
select Forward
scroll to a forwarding option
store the option
27
TTY Operation
Turning Fixed Dialing On or Off
You can use an optional TTY device with your
phone to send and receive calls. You must plug
the TTY device into the phone’s headset jack and
set the phone to operate in 1 of 3 TTY modes.
Notes:
• Use a TSB-121 compliant cable (provided by the TTY
manufacturer) to connect the TTY device to your
phone.
Getting More Out Of Your Phone
• Set the phone volume to level 4 (middle setting) for
proper operation. If you experience a high number of
incorrect characters, adjust the volume as necessary
to minimize the error rate.
• For optimal performance, your phone should be at
least 12 inches (30 centimeters) away from the TTY
device. Placing the phone too close to the TTY device
may cause high error rates.
Setting TTY Mode
When you set your phone to a TTY mode, it operates in
that mode whenever the TTY device is connected.
Find the Feature
M > Settings > Initial Setup
> TTY Setup
Press
1 S
2 SELECT (+)
To
scroll to the TTY mode
HCO
Voice
> Fixed Dial
Press
1 keypad keys
2 OK (+)
3 S
4 SELECT (+)
To
enter your SIM PIN2 code
open the fixed dial menu
scroll to On or Off
select the option
Using the Fixed Dial List
You must turn on fixed dialing to open the fixed dial list.
Find the Feature
M > Office Tools
> Dialing Services
> Fixed Dial
You create and edit fixed dial entries just like phonebook
entries. Fixed dial entries are stored on your SIM card, and
do not have Type, Voice Name, or Ringer ID information.
Using Service Dialing
Dial preprogrammed numbers stored on your
SIM card. Your service provider may program
your SIM card with numbers for services such
as taxi companies, restaurants, and hospitals.
Find the Feature
M > Office Tools
> Dialing Services
> Service Dial
Description
Transmit and receive TTY characters.
Receive TTY characters but transmit
by speaking into the microphone.
Transmit TTY characters but receive
by listening to the earpiece.
Return to normal voice mode.
Using DTMF Tones
You can send numbers to the network as Dual Tone
Multi-Frequency (DTMF) tones during a call. Use DTMF
tones to communicate with automated systems that
require you to submit a PIN code or credit card number.
Activating DTMF Tones
You can set DTMF tones to Long, Short, or Off:
Find the Feature
ù When your phone is in a TTY mode, the
international TTY symbol and the mode setting
display during an active TTY call.
Returning to Voice Mode
To return to normal voice mode, select Voice from the
TTY Setup menu.
Using Fixed Dialing
When you turn on fixed dialing, you can only call
numbers stored in the fixed dial list. Use this
feature to limit outgoing calls to a predefined list
of numbers, country codes, area codes, or other
prefixes.
28
M > Settings > Security
select the TTY mode
The TTY Setup menu can include the following options:
Option
TTY
VCO
Find the Feature
M > Settings > Initial Setup
> DTMF
Short sends a short fixed-duration tone for each keypress.
Long sends each tone for as long as you press the key.
Short DTMF tones work with most automated systems.
Some systems (such as home answering machines) may
require long tones for proper activation.
Sending DTMF Tones
Using the Keypad
Press the number keys to send the numbers as DTMF
tones during a call.
Note: When sending long tones, you may have to enter a
single short keypress first to put the phone in DTMF mode.
Sending Stored Numbers
Using a Timer During a Call
During a call, highlight a number in the phonebook or
recent calls lists, then:
You can set a timer to beep at selected intervals during a
call, and display different types of information during a call.
Press
1 M
To
open the sub-menu
scroll to Send Tones
2 S
3 SELECT (+)
send number as DTMF tones
Monitoring Phone Use
View and Reset Call Timers
Network connection time is the elapsed time from the
moment you connect to your service provider's network to
the moment you end the call by pressing O. This time
includes busy signals and ringing.
To view a call timer:
Select 1 of the following options:
Option
Last Call
Dialed Calls
Received Calls
All Calls
Lifetime
Description
Approximate time spent on the
last dialed or received call. You
cannot reset this timer.
Approximate total time spent on
dialed calls since the last time you
reset this timer.
Approximate total time spent on
calls received since the last time
you reset this timer.
Approximate total time spent on
dialed and received calls since the
last time you reset this timer.
Approximate total time spent on
all calls on this phone. You cannot
reset this timer.
To reset the call timer:
Press
1 RESET (+)
2 YES (-)
> In-Call Timer
Select 1 of the following Beep options:
Option
60 Seconds
Off
To
reset the time (if available)
confirm the reset
Description
Beep at 1-minute intervals during
a call.
No in-call beep.
Select one of the following Display options:
Option
Time
Cost
Total Cost
M > Recent Calls > Call Times
Find the Feature
M > Settings > In-Call Setup
Credit Available
Off
Description
Display the approximate elapsed
time for the current call.
Display the cost of the
current call (if you
subscribe to a call cost
option or advice of
charge).
Display the cost of all
calls since the last time
you reset the timer (if
you subscribe to a call
cost option or advice of charge).
Display how much
credit you have left (if
you subscribe to a call
cost option or advice of
charge).
No in-call timer display.
Getting More Out Of Your Phone
The amount of network connection time you track on
your resettable timer may not equal the amount of time
for which you are billed by your service provider. For
billing information, please contact your service
provider directly.
Find the Feature
Using Handsfree Features
Your phone includes an integrated handsfree
speaker that you can use for handsfree
applications. For instructions on how to use the
handsfree speaker, see your Start Here guide.
You can also purchase an optional Motorola Original™
handsfree car kit, speakerphone, or headset for your
phone. These accessories provide alternative ways for you
to use your phone without using your hands.
If the accessory supports Bluetooth™ wireless
connections, you can setup a Bluetooth wireless link with
your phone (see page 32).
Note: The use of wireless devices and their accessories
may be prohibited or restricted in certain areas. Always
obey the laws and regulations on the use of these
products.
29
Adjusting Bluetooth Accessory Settings
Power-Off Delay
If a Bluetooth-enabled headset or car kit accessory
supports remote volume control, you can use your phone’s
volume keys to set the device’s speaker volume during a
handsfree call.
When connected to a car kit, you can set your phone to
stay on for a period of time after you switch off the ignition.
This prevents the phone from draining your vehicle battery,
but leaves the phone on long enough that you do not have
to re-enter your unlock code when making short stops.
Activating an External Speakerphone
Find the Feature
Getting More Out Of Your Phone
Press
SPEAKER (+) (if available)
or M > Spkrphone On
To
activate the connected
speakerphone
M > Settings > Car Settings
> Power-Off Delay
To use an external speakerphone with your phone,
connect the speakerphone and, during an active call:
Press
1 S
2 SELECT (+)
To
scroll to the time delay
confirm your selection
Automatic Answer
Note: This feature may not work with all car ignition
switches.
Set your phone to automatically answer calls after 2 rings
(4 seconds) when connected to a car kit, speakerphone, or
headset.
Caution: If you select Continuous, the phone does not power
off when you turn off the ignition. Be careful not to drain
your vehicle battery if you select this option.
M > Settings > Car Settings
Find the Feature
or Headset
Press
1 S
2 SELECT (+)
3 S
4 SELECT (+)
To
scroll to Auto Answer
select Auto Answer
scroll to On or Off
M > Settings > Headset
Find the Feature
To
scroll to Voice Dial
select Voice Dial
scroll to On or Off
confirm the setting
Automatic Handsfree
Set your phone to automatically route calls to a car kit
when it detects a connection.
Find the Feature
M > Settings > Car Settings
> Auto Handsfree
Press
1 S
2 SELECT (+)
Find the Feature
M > Settings > Car Settings
> Charger Time
Press
If your headset has a send/end key, this feature enables
you to press the send/end key to voice dial a call from the
headset.
3 S
4 SELECT (+)
When connected to a car kit, you can set your phone to
charge itself for a specified time period after you switch off
the ignition. This helps ensure that the phone battery gets
fully charged while the vehicle is parked.
confirm the setting
Voice Dial From Headset
Press
1 S
2 SELECT (+)
Charger Time
1 S
2 SELECT (+)
To
scroll to the charge time
confirm your selection
Note: This feature may not work with all car ignition
switches.
Making Data and Fax Calls
An optional Motorola Original data kit (which
includes a cable connector) lets you transfer data
between your phone and a computer, Palm OS®
compatible device, or Microsoft Windows CE,
Pocket PC, or Handheld PC device. You can:
• Synchronize phonebook and datebook information
between your phone and a computer or PDA.
• Use your phone as a modem to connect to the
Internet.
• Use your phone to send and receive data and fax calls
from your computer or handheld device.
To
scroll to On or Off
Making a Cable Connection
confirm the setting
Installing the Software
To transfer data between your phone and computer, you
must install the software included with the Motorola
Original data kit. See the data kit user’s guide for more
information.
30
Attaching the Cable
Use a Motorola Original serial cable or Motorola Original
USB cable to connect your phone to the external device.
Note: Not all devices are compatible with a cable
connection. Check your computer or hand-held device to
determine the type of cable you need.
Serial Cable
Sending a Data or Fax Call
Use this procedure to send data or a fax from a connected
computer or hand-held device using a CSD or GPRS
network connection.
Action
1 Make sure that the phone is connected and
powered on.
2 Open the application (such as
dial-up-networking or fax) on your computer, and
place the call through the application.
Note: You cannot dial data or fax numbers
through your phone’s keypad. You must dial
them through your computer, unless you are
making a talk then fax call (see following
section).
3 When the transfer is complete, end the call from
the connected device to close the connection.
Receiving a Data or Fax Call
Use this procedure to transfer data or a fax to a connected
computer or hand-held device.
Transferring the Data or Fax
USB Cable
Action
1 Plug the end of the
cable with the
Motorola logo into the
phone’s accessory
connector port. Make
sure that the logo and
the phone are both
facing you.
2 Plug the other end—the USB connection—into
the USB port on the device.
Making a Wireless Connection
Your phone notifies you when the data or fax call arrives,
and transfers the call to the connected device. Use the
application running on the device to answer the call.
Ending the Data/Fax Connection
Getting More Out Of Your Phone
Action
1 Plug the serial
cable into the
detachable head.
Make sure that the
Motorola logo on
the detachable
head and the metal shielding on the serial cable
plug are both facing you.
2 With the Motorola
logo and the phone
both facing you,
plug the
detachable head
into the phone’s
accessory
connector port.
3 Plug the other end of the cable into the serial
interface connection on the device and tighten
the screws, if present.
Note: BVRP Mobile PhoneTools software is designed to
synchronize with basic features of many popular Personal
Information Management (PIM) software and hardware
products.
When the data or fax transfer is complete, end the call
from the connected device to close the connection.
Making a Talk Then Fax Call
You can place a call where you talk and then
send a fax to the same phone number within
the same call.
Connect to the device that will send the fax, and do the
following:
If the other device supports Bluetooth™ wireless
connections, you can set up a Bluetooth wireless link with
your phone. See the following section.
Press
1 keypad keys
2 M
Note: Not all devices are compatible with a Bluetooth
connection. Check your external device for specifications.
3 S
To
enter the phone number
open the Dialing Menu
scroll to Talk Then Fax
Synchronizing Data
You can synchronize phonebook and datebook information
between your phone, computer, and PDA with BVRP
Mobile PhoneTools software, an accessory for Motorola
phones. See the Mobile PhoneTools user’s guide for more
information.
31
Press
4 SELECT (+)
5
N
To
select Talk Then Fax
Making Your Phone Visible to Other
Devices
Your selection applies to the
next call only.
make the call
To allow an unknown Bluetooth device to discover and
connect to your phone:
Speak and, when ready,
initiate the fax transfer on the
connected device. When the
transfer is complete, end the
call from the connected
device.
Getting More Out Of Your Phone
Setting Up a Bluetooth
Wireless Connection
Your phone supports Bluetooth wireless connections. You
can set up a wireless link with a Bluetooth-enabled
headset accessory, speakerphone, or handsfree car kit, or
connect to a computer or hand-held device to exchange
and synchronize data.
Your phone supports the following Bluetooth device
profiles:
•
•
•
•
•
headset
handsfree
dial-up networking
object exchange
file transfer
Find the Feature
M > Settings > Connection
> Bluetooth Link > Setup
> Find Me
The à (Bluetooth) indicator or Bluetooth Waiting message
flashes, and the phone goes into discoverable mode until a
connection is made, or until 60 seconds elapse.
The device may request permission to bond with your
phone. Select YES (-) and enter the correct PIN code to
create a secure connection with the device.
Connecting to Recognized Devices
Your phone stores the names of previously connected
devices, and lists the recognized devices located within
range of the phone when you open the Handsfree menu. If
your phone is already connected to a device, your phone
lists the connected device and identifies it with a o (in use)
indicator.
To connect to a recognized handsfree device:
Find the Feature
M > Settings > Connection
> Bluetooth Link
> Handsfree
> device name
Searching For Other Devices
For a Motorola headset or other audio device, your phone
automatically attempts to connect to the device.
To connect your phone to a headset accessory or external
device:
Disconnecting From a Device
Find the Feature
M > Settings > Connection
> Bluetooth Link
> Handsfree
> [Look For Devices]
Your phone presents a list of device(s) located within range
of the phone. If your phone is already connected to a
device, your phone lists the connected device and
identifies it with a o (in use) indicator.
To connect to a device, highlight the device name and
press SELECT (+).
The device may request permission to bond with your
phone. Select YES (-) and enter the correct PIN code to
create a secure connection with the device. When the
connection is made, the à (Bluetooth) indicator or a
Bluetooth Connected message displays in the home screen.
The device connected to your phone is identified with a o
(in use) indicator. To disconnect from the device, highlight
the device name and press DROP (+).
Switching To a Headset Or Car Kit During a
Call
You can switch to a headset or car kit audio device during
a call, either from the audio device or from your phone.
Switching From the Audio Device
To connect to your phone from a headset or car kit audio
device, press the device’s Bluetooth button to route all
audio to the device.
Switching From Your Phone
To connect your phone to a recognized headset or car kit
audio device, press M > Use Bluetooth during a call to
route all audio to the device. Your phone attempts to
reconnect to the most recently used audio device.
To switch back to the phone, press M > Use Handset
during a call to route all audio back to the phone.
32
Copying Objects to Another Device
You can use a Bluetooth wireless connection to copy a
picture, sound, phonebook entry, datebook event, or
bookmark from your phone to another phone, computer, or
hand-held device.
Option
Voice Dial
Note: This feature may not work
with all headset accessories.
Copying a Media Object
Highlight the object on your phone that you want to copy to
the other device, then press M > Copy.
Select a recognized device name listed in the Object Exchange
menu, or [Look For Devices] to search for the device to which
you want to copy the object.
Copying a Phonebook Entry, Datebook Event, or
Bookmark
Highlight the item on your phone that you want to copy to
the other device, then press M > Send > Bluetooth.
Using Sync
You can quickly synchronize your phonebook and
datebook entries with an Internet server using a wireless
connection.
Creating an Internet Sync Partner
To enter a computer as a sync partner for your phone:
Find the Feature
> Sync > New
Your phone opens a Partner Details list:
Editing Device Properties
Option
Partner Name
To edit the properties of a recognized device, highlight the
device name and press M > Edit. You can edit the
following options:
Server URL
Access
Description
The name of the device as it displays
in the device list.
Determines how a device connects to
the phone:
Automatic: Device is automatically
connected to the phone without user
interaction.
Ask: Device must request permission to
connect.
M > Settings > Connection
User Name
Password
(data) Path
Description
Assign a common name to the
computer (such as work server)
The URL for the server (you can
omit http://)
User name to log on to the
server
Password to log on to the server
Name of the folder (beneath the
URL path) where your data is
stored
Using an Internet Sync Partner
Getting More Out Of Your Phone
Select a recognized device name listed in the Object Exchange
menu, or [Look For Devices] to search for the device to which
you want to copy the item.
Option
Name
Description
Set to On to transfer voice key
functionality to the Bluetooth
button on a headset accessory
when connected.
To synchronize your phone’s entries with a sync partner:
Find the Feature
M > Settings > Connection
> Sync > partner name
Setting Your Phone’s Bluetooth Options
Find the Feature
M > Settings > Connection
> Bluetooth Link > Setup
You can set the following options. Some options may not
be available for all phone models.
Option
Power
Name
Description
Set to On to enable Bluetooth
functionality on your phone. Set
Off to disable Bluetooth when
you want privacy or when
Bluetooth use is prohibited.
Your phone’s device name that
is sent to other Bluetooth
devices.
Your phone attempts to make a a sync connection with
the sync partner. This might take several minutes, if there
are many entries to synchronize.
Adjusting Network Settings
Your service provider registers your phone to its
network. In some situations, such as using the
phone as a modem or connecting it to a TTY
device, you may need to change the network
registration.
Note: Some settings and/or options described in this
section may not be available for all phone models.
Viewing the Current Registered Network
Find the Feature
M > Settings > Network
> Current Network
Your phone displays the network ID.
33
Finding a New Network
Setting Preferred Networks
You may decide to switch to another network to improve
the calling conditions, because of network coverage or
roaming conditions. To select a new network:
You can create a preferred networks list, so that the phone
searches for networks by your preference. The preferred
list normally is stored on your SIM card. Some service
providers may store network preferences on the phone.
M > Settings > Network
Find the Feature
> New Network
Your phone locates and registers on the strongest network
apart from the current network.
Listing All Networks
M > Settings > Network
> Available Networks
Getting More Out Of Your Phone
Your phone displays a list of available networks.
Press
1 S
2 VIEW (+)
3 REGISTER (+)
To
scroll to the network you want
view network details
register with the network
Changing Network Setup Values
Set how your phone searches for a network connection.
Note: Actual field names and values may vary depending
on the technologies available to your service provider.
Find the Feature
3 S
4 SELECT (+)
Manual
> My Network List
1 S
2 SELECT (+)
To
scroll to the network you want
view network details
Your home network is always the first entry in the list, and
is identified by the V (home) icon. Other network entries
are sorted by preference.
Adding an Entry to the Preferred Network List
Find the Feature
M > Settings > Network
> My Network List
M > Add
Press
1 BROWSE (+)
To
browse available networks
or
OK (+)
2 OK (+)
enter the network ID number
confirm the new entry
Editing a Preferred Network List Entry
To
scroll to an item to change
Find the Feature
open the item’s list
scroll to an option described
in the following lists
select the option
Press
1 S
2 M
Network search Type options:
Option
Automatic
M > Settings > Network
M > Settings > Network
> Network Setup
Press
1 S
2 CHANGE (+)
Find the Feature
Press
View a list of available networks, and register your phone
with a network.
Find the Feature
Accessing the Preferred Network List
Description
Scan for networks automatically
based on priority.
View a list of all networks from
which you can choose.
M > Settings > Network
> My Network List
3 S
4 SELECT (+)
5 DELETE (-)
To
scroll to the entry
open the network menu
scroll to Edit
select Edit
delete information
or
keypad keys
6 OK (+)
enter information
store the new information
Deleting a Preferred Network List Entry
Network search Speed options:
Option
Slow
Medium
Fast
Continuous
34
Description
Slowest network search and
repeat rate.
Medium search/repeat.
Fast search/repeat.
Continuous search until a network
is found.
Find the Feature
M > Settings > Network
> My Network List
Press
1 S
2 M
3 S
4 SELECT (+)
5 YES (-)
To
scroll to the entry
open the network menu
scroll to Delete
select Delete
confirm the deletion
Adjusting Service Tones
You can set your phone to beep each time the network
registration status changes.
Find the Feature
M > Settings > Network
> Service Tone
Press
1 S
2 SELECT (+)
To
scroll to On or Off
select the option
Setting the Call Drop Alert
You can set your phone to emit an alert tone whenever the
network drops a call. Because digital networks are so
quiet, the call drop alert may be your only indication that a
call has been dropped.
Find the Feature
M > Settings > Network
Press
1 S
2 SELECT (+)
To
scroll to On or Off
select the option
Monitoring Battery Charge
To view a detailed battery charge meter:
Find the Feature
M > Settings > Phone Status
> Battery Meter
Viewing Phone Specifications
To view your phone’s feature specifications:
Find the Feature
Getting More Out Of Your Phone
> Call Drop Tone
M > Settings > Phone Status
> Other Information
35
Personal Organizer
Datebook
Day View
The datebook is a calendar that you can use to schedule
and organize events such as appointments and meetings.
Select a day and press the center select button to see the
day’s events.
Note: You must set the correct time and date to use the
datebook.
To schedule or review datebook events:
Untimed Event
Reminder Alarm
M > Office Tools > Datebook
Find the Feature
You can set the datebook to display a calendar for the
month or week. To change the default view, see page 37.
Scroll down for
more events.
Month View
When default view is set to month, the datebook initially
displays a calendar for the month. An indicator in the lower
right corner of the date box indicates that 1 or more events
are scheduled for the day.
Return to
previous
screen.
yÉ Day of Week
(
THU 20-NOV
• Joe's Birthday
8:00A Marie, meeti...
9:00A Jim meeting
9:30A conference c...
11:00A status report
12:00A Jane lunch
14:00A presentation
15:30A weekly sale...
BACK
M
VIEW
Events
Show event
details.
Press M to open Datebook Menu.
Event View
Select an event and press VIEW (+) to see event details.
Month (press
* or # to
select previous
month or next
month)
Scheduled
Events Indicator
yÉ Days of the
(
October 2003 #
S M T W T F S
*
5
12
19
26
6
13
20
27
EXIT
Exit datebook.
7
14
21
28
1
8
15
22
29
M
2
9
16
23
30
3
10
17
24
31
4
11
18
25
Week
Selected Day
Duration
Alarm Time
(
ATHU 8:00am
Marie, meeting for
status reports
(1 hrs)
A 10 min before
None
yÉ Day & Time
Event Details
Repeat Interval
WEEK
Press M to open
Datebook Menu.
Go to week
view.
Week View
Personal Organizer
Reminder Alarm
Dates of the
Month (press
S to select)
When default view is set to week, the datebook initially
displays a calendar for the week. Filled boxes indicate
scheduled events.
Return to
previous
screen.
BACK
M
EDIT
Edit event.
Press M to open Datebook Menu.
Creating a Datebook Event
A title is required for a datebook event. All other
information is optional.
Notes:
Week (press
S up or down
to select)
Untimed Event
Full Day
(12-Hour) Event
Exit datebook.
yÉ Days of the
(
* 12 OCT - 18 OCT ‘03
#
S M T W T F S
7:00
9:00
11:00
13:00
15:00
EXIT
Week (press
S left or right
to select)
1-Hour Event
• You must create an event to use the reminder alarm.
• Your phone must be turned on for the reminder alarm
to sound.
Find the Feature
Press
M
MONTH
Press M to open
Datebook Menu.
Go to month
view.
1 S
2 center select
button
3 M
4
5
6
7
M > Office Tools > Datebook
To
scroll to the day
display the day view
S
open the Datebook Menu
scroll to New
SELECT (+)
CHANGE (+)
keypad keys
select New
select Title
enter a title for the event
Tip: Press M to select a
text entry method.
36
Press
8 OK (+)
9 S
10 DONE (-)
To
store the event title
scroll to other fields and enter
information as necessary
You can set start time,
duration, date, repeat
interval, and reminder alarm.
store the event
Changing Event Information
M > Office Tools > Datebook
Find the Feature
Press
1 S
2 center select
button
3 S
4 VIEW (+)
5 EDIT (+)
6 S
7 CHANGE (+)
8 keypad keys
9 DONE (-)
To
scroll to the day
display the day view
scroll to the event
display the event view
edit the event
scroll to the information you
want to change
edit the information
enter new information
store the information
Copying an Event
Find the Feature
Press
1 S
2 center select
button
5 S
6 SELECT (+)
7 YES (-)
8 keypad keys
9 } (+) or S to
the right
10 DONE (-)
11 S
12 DONE (-)
To
scroll to the day
display the day view
scroll to the event
open the Datebook Menu
scroll to Copy
Find the Feature
M > Office Tools > Datebook
Press
1 S
2 center select
button
To
scroll to the day
3 S
4 M
scroll to the event
5 S
6 SELECT (+)
7 YES (-)
display the day view
open the Datebook Menu
scroll to Delete
select Delete
confirm the deletion
Viewing and Dismissing an Event Reminder
When you set a reminder alarm for an event, the phone
displays an event reminder and sounds a reminder alarm.
To view or dismiss an event reminder:
Press
VIEW (+)
To
view the event
Press S to scroll through
the event details.
or
EXIT (-)
dismiss the reminder
If you have more than 1 event set up for the same time, the
phone displays each event in sequence. As you view and
dismiss each event reminder, the next event is displayed.
Changing the Datebook Setup
You can set the datebook’s default view to month or week,
change the daily start time, and set the length of time that
events are stored.
Find the Feature
M > Office Tools > Datebook
M > Setup
copy the event
confirm the copy
Copying a Datebook Event to Another
Device
Your phone assumes that you
want to change the date, and
displays the Date field.
enter the date information
move to month, day, and year
You can use a Bluetooth wireless connection to copy a
datebook event from your phone to another phone,
computer, or hand-held device. For more information, see
page 33.
save the copy of the event
scroll to and edit event
information, if necessary
store the information
You can synchronize datebook entries between
your phone and computer or hand-held device
with BVRP Mobile PhoneTools software, an
accessory for Motorola phones. See the Mobile
PhoneTools user’s guide for more information.
Personal Organizer
3 S
4 M
M > Office Tools > Datebook
Deleting an Event
Synchronizing Datebook Entries
Note: Mobile PhoneTools software is designed to
synchronize with basic features of many popular Personal
Information Management (PIM) software and hardware
products.
37
If the other device supports Bluetooth™ wireless
connections, you can set up a Bluetooth wireless link with
your phone to synchronize datebook entries.
Alarm Clock
Setting an Alarm
M > Office Tools > Alarm Clock
Find the Feature
Press
S
SELECT (+)
CHANGE (+)
keypad keys
OK (+)
6 S
7 DONE (-)
You can record personal messages and phone calls on
your phone.
Making a Recording
Your phone has an alarm clock with 5 separate alarms that
you can set and use when the phone is powered on. Each
alarm can be configured with a name, time, and alert tone.
1
2
3
4
5
Voice Records
To
scroll to [New Alarm]
select the option
select Name
enter a name for the alarm
store the name
scroll to other fields and enter
information as necessary
You must set start time, alert
tone, and alarm volume.
store the alarm
Use this procedure to create a voice record from the home
screen, or to record a phone call in progress. Your phone
plays an alert tone to notify the other party that the call is
being recorded.
Note: Recording phone calls is subject to varying state
and federal laws regarding privacy and recording of
conversations.
Tip: Make your recording in a quiet location. Hold the
phone about 4 inches (10 centimeters) from your mouth,
and speak directly into the phone in a normal tone.
Action
1 Press and hold the voice key. The phone sounds
an alert tone and begins recording.
2 Speak into the phone.
3 Release the voice key to stop recording.
Viewing the Voice Records List
Find the Feature
Enabling/Disabling an Alarm
Alarms that you set are listed by name on the Alarm Clock
menu. An active alarm is identified by an ã (alarm)
indicator.
To enable or disable an alarm:
M > Office Tools > Alarm Clock
Personal Organizer
Find the Feature
Press
1 S
2 ENABLE (+)
To
scroll to the alarm
enable a highlighted
(disabled) alarm
disable a highlighted
(enabled) alarm
Locked
Recording
Scroll down for
more
recordings.
Return to
previous
screen.
(
Press
DISABLE (-) or O
SNOOZE (+)
To
turn off the alarm
turn off the alarm for 8
minutes
The alarm is reactivated at
the end of 8 minutes.
Time/Date
Recorded
Play highlighted
recording.
Press M to open
Voice Records Menu.
Playing a Recording
M > Office Tools
> Voice Records
Turning Off an Alarm
When an alarm sounds, your phone displays the alarm
name, time, and date.
yÉ
Voice Records
f 10) 2:20pm 10/15/03
9) 4:05pm 10/10/03
8) 4:00pm 10/10/03
7) 11:05am 10/10/03
6) 9:00am 10/10/03
5) 7:15pm 10/09/03
4) 12:22pm 10/06/03
3) 11:30am 10/06/03
EXIT
M
PLAY
Find the Feature
The alarm rings for 3 minutes, then snoozes for 8 minutes.
The alarm repeats this cycle for up to 90 minutes, or until
you perform 1 of the following procedures.
38
> Voice Records
or
DISABLE (+)
M > Office Tools
Press
1 S
2 PLAY (+)
To
scroll to the recording
play the recording
When you connect an optional Motorola Original™
headset or FM Stereo Radio Headset accessory to your
phone, playback is automatically routed to the headset.
Tip: You can play a recording while taking a call. It will not
be transmitted to the other party.
Playback Screen
To lock or unlock a recording during playback:
The playback screen is displayed as the recording plays.
Indicates %
played.
Press S left to
rewind.
Return to
previous
screen.
(
yÉ Recording
Voice Record 3
{
Number
Press S right
to fast forward.
}
SAVE
M
Erase
recording.
DELETE
Press
To
open the Voice Records Menu
scroll to Lock or Unlock
1 M
2 S
3 SELECT (+)
lock or unlock the recording
Playback stops when you lock or unlock a recording. Press
any number key to resume playback.
Deleting a Recording
M > Office Tools
Find the Feature
Press M to open
Voice Records Menu.
> Voice Records
Press
1 S
2 M
Voice Record Controls
Stop playback,
view options to
unlock or delete
recording.
Stop playback &
go to Voice
Records Menu.
Press right to
fast forward 3
seconds. Press
right & hold to
fast forward to
end.
Raise or lower
playback
volume.
3 S
4 SELECT (+)
5 YES (-)
NO (+)
cancel deletion
Notes:
• You cannot delete a locked recording.
Press up/down to
stop playback &
scroll to next
recording.
Calculator
You can use your phone as a calculator and currency
converter.
Selected
Function
Press S to
select function.
M > Office Tools
> Voice Records
To
scroll to the recording
open the Voice Records Menu
scroll to Lock or Unlock
lock or unlock the recording
Calculator
Press ce to clear
last entry.
Exit calculator.
yÉ Entered
35
+ 20
55
+
×_ ÷
Locking and Unlocking a Recording
Lock a recording to prevent it from being deleted. You must
unlock a recording to delete it.
(
1
2
4
5
6
7
ce
8
9
.
EXIT
0
3
M
Press M to open
Calculator Menu.
=
Numbers
Use keypad to
enter number or
insert decimal
point.
Calculate the
result.
Personal Organizer
Press any number key to alternately
stop/start playback.
3 S
4 SELECT (+)
select the highlighted option
confirm the deletion
• You cannot recover a deleted recording.
When playback
is complete,
press right to
restart.
Press left to
rewind 3
seconds. Press
left & hold to
rewind to
beginning.
Press
1 S
2 M
open the Voice Records Menu
scroll to Delete or Delete All
or
Stop playback &
return to voice
record list.
Find the Feature
To
scroll to the recording
Calculating Numbers
Find the Feature
Press
1 number keys
2 S
3 number keys
4 = (+)
M > Office Tools > Calculator
To
enter a number
select a calculator function
enter next number
calculate the result
39
Press c to clear the calculation. Press ce (clear entry) to
clear the last entry when performing a calculation.
Press M to open the Calculator Menu to perform the
following functions:
Function
+/MS
MC
MR
%
Description
Change the entry’s sign
(positive/negative).
Store the value in memory (overwrites
values already stored).
Clear the value stored in memory.
Replace the displayed value with the
value stored in memory.
Divide the displayed value by 100.
Converting Currency
The currency converter works just like the calculator, but
converts a currency value based on the exchange rate you
specify:
Find the Feature
M > Office Tools > Calculator
M > Exchange Rate
Press
1 number keys
2 OK (+)
3 number keys
To
enter the exchange rate
store the exchange rate
enter the amount to convert
(amount to multiply by the
exchange rate)
open the Calculator Menu
scroll to Convert Currency
4 M
Personal Organizer
5 S
6 SELECT (+)
40
perform the conversion
Security
Locking the SIM Card
Unblock the SIM Card PIN2 Code
Your Personal Identification Number (PIN) code protects
the information stored on your SIM card. When the SIM
card is locked, you must enter your SIM card PIN code to
unlock the SIM card each time you turn on the phone or
insert the SIM card in the phone. Your SIM card PIN code
is given to you by your service provider.
If you enter an incorrect SIM card PIN2 code 3 times in a
row, your phone’s SIM PIN2 protected features are
disabled and your phone displays SIM Blocked when you try
to use a PIN2 feature. You must enter a PIN2 unblocking
key (PUK2) code, which you can obtain from your service
provider.
M > Settings > Security
> SIM PIN
Press
1
2
3
4
S
To
scroll to On or Off
SELECT (+)
keypad keys
OK (+)
switch SIM PIN lock on or off
enter your SIM card PIN code
submit your code
Press
1 **052
*
2 keypad keys
3 OK (+)
4 keypad keys
Unblock the SIM Card PIN Code
If you enter an incorrect SIM card PIN code 3 times in a
row, your SIM card is disabled and your phone displays
SIM Blocked. You must enter a PIN unblocking key (PUK)
code, which you can obtain from your service provider.
5 OK (+)
Caution: If the unblocking attempt is tried unsuccessfully
10 times, the SIM card is permanently disabled and your
phone displays SIM Disabled.
7 OK (+)
Press
1 **05*
2 keypad keys
3 OK (+)
4 keypad keys
5 OK (+)
6 keypad keys
7 OK (+)
To
open the PIN
unblocking editor
enter the PUK code
submit the PUK code
enter a new SIM card
PIN code
Note: The SIM PIN
code must be between
4 and 8 digits in length.
assign the new SIM PIN
code
re-enter the new SIM
PIN code
confirm the new SIM
PIN code and unblock
the SIM card
6 keypad keys
To
open the PIN2
unblocking editor
enter the PUK2 code
submit the PUK2 code
enter a new SIM card
PIN2 code
Security
Find the Feature
Note: The SIM PIN2
code must be between
4 and 8 digits in length.
assign the new SIM
PIN2 code
re-enter the new SIM
PIN2 code
confirm the new SIM
PIN2 code and unblock
PIN2 features
Locking and Unlocking
Applications
You can lock specific phone applications (such as the
phonebook) so that users must enter the unlock code to
use them.
Find the Feature
M > Settings > Security
> Lock Application
Press
1 keypad keys
2 OK (+)
3
4
5
6
S
To
enter your unlock code
open the lock application
menu
scroll to the application
CHANGE (+)
S
SELECT (+)
select the application
scroll to Locked or Unlocked
select Locked or Unlocked
41
News and Entertainment
Micro-Browser
Storing a Picture File
The micro-browser lets you access Web pages
and Web-based applications on your phone.
Contact your service provider to set up access,
if necessary.
Note: Your phone may use a high-speed General Packet
Radio Service (GPRS) network connection. This type of
connection is identified by a + (GPRS) indicator in the
home screen that disappears when you start a
micro-browser session. If you see an ? (in-call) indicator
during a micro-browser session, your phone is using a
standard voice channel connection. The type of network
connection your phone uses depends on your service
provider’s network. Your network connection charges may
vary depending on the type of connection used.
Starting a Micro-Browser Session
News and Entertainment
Find the Feature
Press
1 S
2 SELECT (+)
Interacting With Web Pages
SELECT (+)
keypad keys,
followed by OK (+)
BACK (-)
M
To
scroll through text, or
highlight a selectable item
select the highlighted item
enter information
Tip: Press DELETE (-) to
delete 1 letter at a time if you
make a mistake.
go back to the previous page
open the Browser Menu
Downloading Objects From a Web Page
You can download a photo, picture, animation, sound,
video clip, or phone theme from a Web page be selecting
its link. You can store these media objects on your phone,
and use them as wallpaper images, screen saver images,
and event alerts.
42
2 S
3 SELECT (+)
Storing a Sound File
Press
1 STORE (+)
To
view storage options
scroll to Store Only or
Set As Ring Tone
select the option
2 S
3 SELECT (+)
If you select Store Only, the
procedure is complete.
To
scroll to a bookmark, service,
or application
select the item
If you are unable to establish a network connection with
the micro-browser, contact your service provider.
S
To
view storage options
scroll to Store Only,
Apply as Wallpaper or
Apply as Screen Saver
perform the storage option of
your choice
M > Web Access > Browser
Shortcut: If you open a text message with a Web address
(URL) embedded in it, you can press M > Go To to launch
the micro-browser and go directly to the URL.
Press
Press
1 STORE (+)
If you select Set As Ring Tone,
your phone displays
Set As Which?, and lists the
events for which you can set
an alert.
scroll to the event
4 S
5 SELECT (+)
store the sound and set it as
the event alert
Storing a Video Clip
Press
STORE (+)
To
store the video clip
Selecting or Creating a Web Session
Use this feature to select or create a Web session, or
network connection profile. You can use different Web
sessions to connect to the Internet in different ways.
Find the Feature
M > Web Access
> Web Sessions
To create a Web session, you must configure the following
settings. Contact your service provider to obtain the
following information, if necessary. Actual field names and
values may vary depending on the technologies available
to your service provider. Some settings may not be
available for all phone models.
Option
Name
Homepage
WAP IP 1
Description
Enter the Web session name.
Specify the default home page.
Primary WAP gateway IP
address.
Option
WAP Port 1
WAP IP 2
WAP Port 2
Timeout
CSD No. 1
User Name 1
Password 1
Speed (Bps) 1
Line Type 1
CSD No. 2
User Name 2
Speed (Bps) 2
Line Type 2
GPRS APN
User Name
Password
Running the Micro-Browser in the
Background
Some phones are set up to run a micro-browser session in
the background when the phone registers with a network.
This lets your phone display information services
messages sent by your service provider (such as stock
updates, news headlines, or sports scores). These types
of services typically are available through subscription
from your service provider.
Turning a Background Micro-Browser Session On
or Off
Find the Feature
M > Messages
M > Info Srvc Setup
> Browser Services
Press
1 S
2 SELECT (+)
Setting Service Preferences
To run a background micro-browser session, you must
indicate your service preferences. Contact your service
provider for more information.
M > Messages
M > Info Srvc Setup
Find the Feature
> Browser Services
> Options
Action
1 Open your home page or go to your service
provider’s setup page. Your phone displays a
menu of available folders and channels.
2 Set up your options. The phone runs the
micro-browser in the background and displays
your choices.
Phone Themes
A phone theme consists of a bundled set of image and
sound files with a specific theme (such as a special event
or cartoon character) that you can apply collectively to
your phone. Phone themes typically include a wallpaper
image, screen saver image, and ring tone. Your phone
includes several preloaded themes. You can download and
install additional themes on your phone.
Downloading Themes
To download a theme from the browser, see page 42.
When you install the theme, you can instantly apply its
screen saver, wallpaper, and ring tone when your phone
prompts you to Apply Theme Now?
Selecting Themes
You can apply any of the themes installed on your phone.
Note: If 1 of a theme’s components is not available, then a
default setting is applied.
Find the Feature
News and Entertainment
Password 2
Description
Primary WAP port number.
Secondary WAP gateway IP
address.
Secondary WAP port number.
Time at which the phone exits the
micro-browser application when
no keypress activity is detected.
Primary phone number to use to
set up a CSD connection.
User name for primary CSD
number.
Password for primary CSD
number.
Connection speed for primary
CSD number.
Line type (modem or ISDN) for
primary CSD number.
Secondary CSD dial-up phone
number.
User name for secondary CSD
number.
Password for secondary CSD
number.
Connection speed for secondary
CSD number.
Line type (modem or ISDN) for
secondary CSD number.
GPRS access point name (the
name of the WAP service
provider).
User name for GPRS APN
connection.
Password for GPRS APN
connection.
M > Multimedia > Themes
> theme
Deleting Themes
You cannot delete the preloaded themes on
your phone. To delete 1 or all of the themes that
you have downloaded and installed:
Find the Feature
M > Multimedia > Themes
> theme
Press
1 M
To
open the Theme menu
scroll to Delete or Delete All
2 S
3 SELECT (+)
select the option
To
scroll to On or Off
select the setting
43
Using Photos and Pictures
You can send your photos to other wireless phone users or
email addresses, assign photos to specific phonebook
entries, and use them as wallpaper or screen saver
images.
Your phone may contain predefined photos,
pictures, and animations. You can download and
store additional images on your phone.
Downloading Pictures
Option
Reorder
Details
Rename
Delete
Mark/Unmark or
Mark All/Unmark All
Send In Message
To download a picture with the micro-browser, see
page 42. To store a picture from a message, see page 9.
Categories
Managing Pictures
Note: Predefined images are identified by a ë
(predefined object) indicator. You cannot rename, delete,
or view details about predefined images.
To view a photo, picture, or animation stored on your
phone:
News and Entertainment
Find the Feature
Press
1 S
2 VIEW (+)
3 S up or down
DETAILS (+)
Move
Copy
To
scroll to the picture
view the picture
view the next/previous picture
Pictures Setup
view picture information
View Free Space
or
Download Pictures
or
M
open the Pictures Menu to
perform other procedures
The Pictures Menu can include the following options:
Option
Zoom
New
Apply As
Resize Image
Edit
44
M > Multimedia > Pictures
Assign To Category
Description
Change the zoom factor of
the selected picture.
Select Picture to activate the
camera to take a new photo.
Select Picture Album to collect a
group of pictures in a single
presentation.
Set the picture as your
phone’s Wallpaper or
Screen Saver image.
Select Phonebook Entry to assign
the picture to a phonebook
entry to enable picture
caller ID.
Change the size of the
selected picture.
Edit picture details.
Description
Change the picture order in a
picture album.
View picture information.
Rename the picture.
Delete the selected picture or
all marked picture(s).
Mark 1 or more pictures that
you want to move, copy,
send, or delete.
Insert selected picture or
marked picture(s) in a new
message.
Create a new category, or
view pictures in a selected
category.
Assign the picture to a
defined category.
Move selected picture or
marked picture(s) to another
device.
Copy selected picture or
marked picture(s) to another
device.
Open the setup menu to
adjust picture settings.
Launch the micro-browser to
download a picture.
View memory space available
for storing pictures.
Using Video Clips
You can download video clips with the micro-browser, and
receive video clips in multimedia messages. For
instructions on how to play video clips stored on your
phone, see your Start Here guide.
Downloading Video Clips
To download a video clip with the micro-browser, see
page 42. To store a video clip from a message, see
page 9.
Managing Video Clips
To play a video clip stored on your phone:
Find the Feature
Press
1 S
2 SELECT (+)
M > Multimedia > Videos
To
scroll to the video clip
start video clip playback
During video clip playback, press M to open the
Videos Menu to perform various operation on the video:
Option
Zoom
Details
Rename
Delete
Mark/Unmark or
Mark All/Unmark All
Send In Message
Categories
Assign To Category
Move
Videos Setup
Download Videos
View Free Space
Games and Applications
Your phone contains Java games that you can
play between calls. Each game includes online
playing instructions.
Your phone may contain additional Java
applications that add features and functionality to your
phone. Java games and applications are stored in the
Games & Apps folder on your phone.
Downloading an Application With the
Micro-Browser
Find the Feature
Launching a Java Application
Find the Feature
Press
1 S
2 SELECT (+)
3 S
4 SELECT (+)
1 S
2 SELECT (+)
3 DWNLOAD (+)
launch the application, or
open the list of applications in
a suite
scroll to the application you
want, if necessary
launch the application
Your phone’s keys perform the following functions in a
Java application.
Key
S
5
O
N
M
Function
Move up, down, left, or right in a game.
“Fire” your weapon in a game.
End the application.
Call a number in the application.
Open the Java applications menu.
Analyzing or Deleting a Java Application
Find the Feature
Press
1 S
2 M
3 S
4 SELECT (+)
M > Games & Apps
To
scroll to the application
open the application manager
menu
scroll to a menu option
select the option to perform
procedures as described in
the following list
The application manager menu can include the following
options:
Option
View Details
M > Web Access > Browser
To
scroll to the application
To
scroll to the application
Using Control Keys
Go to the page that contains the application, then:
Press
M > Games & Apps
News and Entertainment
Copy
Description
Change the zoom factor of
the selected video clip.
View video clip information.
Rename the video clip.
Delete the selected video clip
or all marked video clips.
Mark 1 or more video clips
that you want to move, copy,
send, or delete.
Insert selected video clip or
marked video clips in a new
message.
Create a new category, or
view video clips in a selected
category.
Assign the video clip to a
defined category.
Move selected video clip or
marked video clips to another
storage device.
Copy selected video clip or
marked video clips to another
storage device.
Open the setup menu to
adjust video clip settings.
Launch the micro-browser to
download a video clip.
View memory space available
for storing video clips.
Note: If you do not have enough phone memory to
download a Java application, you can free memory space
by deleting unused Java applications.
Delete
Description
Display the suite name, vendor,
version, number of apps, flash
usage, and memory
requirements.
Delete the suite.
view the application details
download the application
45
Viewing Java Version and Available
Memory
Press
6 CHANGE (+)
To view Java version information, or the amount of phone
memory available for Java applications:
7 S left or right
8 OK (+)
9 CHANGE (+)
Find the Feature
M > Settings > Java Settings
> Java System
Press
1 S
2 OK (+)
Option
CLDC Version
MIDP Version
News and Entertainment
Data Space
(both Java and
non-Java data
space)
Program Space
Heap Size
To
scroll through information as
described in the following list
close the display
Displays
Your phone’s connected limited
device configuration version.
Your phone’s mobile information
device profile version.
Memory available for application
data (such as game scores or
application settings), and for
downloaded graphics, sounds, all
camera photos and MMS
messages.
Memory available for Java
applications.
Amount of runtime memory
available for Java applications.
12 BACK (-)
13 DONE (-)
Press first column
keypad keys (1,
4, 7, *) to
turn instruments
on/off.
Editing Sounds with MotoMixer
Creating or Editing a Mix File
Find the Feature
M > Multimedia > MotoMixer
> [New Mix] or
mix file name
Press
1
2
3
4
S
SELECT (+)
CHANGE (+)
keypad keys
5 OK (+)
To
scroll to the base track
select the base track
select Name
enter a name for the mix file
you are creating
store the name
The track plays to the end
and stops. To edit your mix,
press PLAY (+) again.
close the base track editor
close the mix file display
You can select which instruments you want to play and
when you want to play them. The mix editor shows the
current settings for each instrument (see following table for
details).
Note: If you do not have enough phone memory to
download a Java application, you can free memory space
by deleting unused Java applications.
MotoMixer lets you edit and save special MIDI-based
sound files called Groove Tunes on your phone. These
sound files are made up of 4 instruments such as piano,
bass, drums, and guitar. The phone comes preloaded
with base tracks (which you cannot edit or delete), but you
can download others and use them all to create or edit
your own mix files. The mix files you create display in the
list of available alerts.
store the tempo setting
select Mix to open the mix
editor
start playing/mixing the track
edit the instruments (see
following section)
MotoMixer Editing Controls
Instrument Name
Note: To download new MotoMixer files, see page 42.
46
10 PLAY (+)
11 keypad keys
To
select Tempo
adjust the tempo setting
Second column
keypad keys add
effects.
Third column
keypad keys
set instrument
variant.
Piano
Bass
Drums
Guitar
BACK
M
PLAY
Press PLAY (+) to play the mix file. Turn instruments on or
off, add effects, and/or set an instrument variant using the
following keypad keys:
Key
1
2
3
4
5
6
7
8
9
*
0
#
Effect
Turn on/off first instrument (Piano above)
Add effect to first instrument
Set variant for first instrument
Turn on/off second instrument (Bass above)
Add effect to second instrument
Set variant for second instrument
Turn on/off third instrument (Drums above)
Add effect to third instrument
Set variant for third instrument
Turn on/off fourth instrument (Guitar above)
Add effect to fourth instrument
Set variant for fourth instrument
Use the following keys to perform additional mix functions:
Key
M
BACK (-)
Effect
Open the Mix Menu to reset 1 or all
instruments
Return to the Mix Details display
when you are finished mixing
Using, Editing, or Deleting a Mix File
To edit or delete a mix file, or set a mix file as a ring tone:
Find the Feature
Press
1 S
2 M
3 S
4 SELECT (+)
M > Multimedia > MotoMixer
To
scroll to the mix file
open the Mix Menu
scroll to Edit, Delete, Play, or
Set as Ring Tone
select the option
Creating Ring Tones
2 S up or down
or
3
4
5
6
7
keypad keys
OK (+)
CHANGE (+)
keypad keys
OK (+)
DONE (-)
Key
0
store the notes
select Name
enter the name for the tone
store the name
store the tone
Entering Notes
To make a note sharp or flat, enter the sharp or flat
character (# or &) before the note.
You can enter 1 or more rest characters (r) in the note
sequence. Set rest length the same way you set note
length.
2
3
4
7
Description
sharp
flat
note A
note B
note C
note D
note E
note F
note G
rest
Set the length (0 to 5) after a note or rest. If you do not
specify a length, a quarter note length (2) is appended to
the note. If needed, you can enter an optional length
modifier (. or : or ;) after the length character.
Key
Press the keypad keys to set note length, enter rests, and
enter or edit note information. If necessary, press a keypad
key multiple times to cycle through its available options.
2
Your phone identifies each note by octave (*0 through *8),
note (a through g, with sharp notes preceded by a #), and
note length (0 through 5). For example, a C# quarter note
in octave 4 displays as *4#c2.
Display
#
&
a
b
c
d
e
f
g
r
Lengths and Modifiers
Press S up or down to cycle through notes and select the
note you want.
Tip: Press M > Play All at any time to play the notes you
have entered.
Description
enter * followed by a number
(0 to 8) to set the octave
Notes and Rests
M > Multimedia > Sounds
To
select Notes
enter notes (see following
section)
Display
*
Note: Octaves 3 through 5 cover the full range of notes
currently available on your phone. The notes are
duplicated in octaves 0-2 and 6-8.
0
> [New iMelody]
Press
1 CHANGE (+)
Enter * before a number to identify it as an octave value.
Octave information (*0 to *8) must come before the note. If
you do not specify an octave, the note is played as an
octave 4 note.
Key
Creating a Tone
Find the Feature
Octave
News and Entertainment
You can create and store custom ring tones on your
phone. The ring tones display in the list of available alerts.
Each note must contain the following information, in the
following sequence: octave, note, length, and length
modifier (optional).
0
1
3
4
5
1
Display
0
1
2
3
4
5
.
:
;
Description
whole note
half note
quarter note
eighth note
sixteenth note
1/32 note
dotted note
(1 and 1/2 length note)
double dotted note
(1 and 3/4 length note)
2/3 length note
47
Example
Action
1 Press S to scroll up to *4c, then wait for the
cursor to move to the next position
2 Press S to scroll down to *3f
The phone adds a 2 after each note you enter to
identify it as a quarter note.
3 Press 7 to enter a rest character (r)
4 Press S to scroll up to *3a
5 Press S to scroll up to *4c
6 Press M > Play All to play the tone
News and Entertainment
Press
1 S
2 M
3 S
4 SELECT (+)
5 PLAY (+)
M > Multimedia > Sounds
To
scroll to the tone
CANCEL (-)
Option
Lighting Conditions
Exposure
Resolution
Shutter Tone
Press
1 S
2 EDIT (+)
5 S left or right
6 DELETE (-)
7 S up or down
M > Multimedia > Sounds
select Notes
move the cursor to the right of
the note information you want
to edit
delete note information
enter new note information
or
keypad keys
8 OK (+)
9 DONE (-)
store new note information
save your changes
Deleting a Tone
You cannot delete the predefined ring tones included with
your phone. To delete a ring tone that you created:
Find the Feature
Status Icons
To
scroll to the tone
open the tone details
scroll to Notes
M > Multimedia > Sounds
M > Multimedia > Camera
M > Pictures Setup
The Pictures Setup menu can include the following options:
You cannot edit the predefined ring tones included with
your phone. To edit a ring tone that you created:
Find the Feature
select Delete
confirm the deletion
To adjust camera settings:
return to my tones list
Editing a Tone
open the Tone Menu
scroll to Delete
For instructions on how to take and send photos, see your
Start Here guide.
open the Tone Menu
scroll to Play
select Play
play the tone again
To
scroll to the tone
Camera
or
3 S
4 CHANGE (+)
48
3 S
4 SELECT (+)
5 YES (-)
Find the Feature
Playing a Tone
Find the Feature
Press
1 S
2 M
Description
Set to Automatic, Sunny, Cloudy,
Indoor (Home), Indoor (Office), or
Night.
Set to +2, +1, 0, -1, or -2.
Set the camera to capture
photos at the following
resolutions: MMS (160x120
pixels), Medium (320x240
pixels, or High (640x480
pixels)
Activate a tone that sounds
when you take a photo. Can
be set to None, Chimp, Quack, Flix,
Boing, or Click.
Turn status icons On or Off in
camera viewfinder mode.
SIM Applications
Your SIM card may contain applications that
process your outgoing calls, text messages, and
other events. Contact your service provider for
more information.
Find the Feature
M > Office Tools
> SIM Applications
Troubleshooting
Check these questions first if you have problems with your
phone. If you need additional help, contact the Motorola
Customer Call Center at 1-800-331-6456 (USA) or
1-800-461-4575 (Canada).
Question
Is your battery
charged? Do
you see Ä in
the display?
Do you have a
valid SIM card
inserted in
your phone?
Does the
handset have
a signal? Do
you see ! in
the display?
Is the earpiece
volume too
low?
Is the other
party unable
to hear you?
Also, make sure that your phone’s
microphone is not blocked by its
carrying case or a sticker.
Dropping your phone, getting it
wet, or using a non-Motorola
battery or battery charger can
damage the phone. The phone’s
limited warranty does not cover
liquid damage or damage caused
from using non-Motorola
accessories.
Problem
My phone was
stolen. To
whom should I
report this?
I forgot my
password.
Solution
Report a stolen phone to the
police and to your service provider
(the company that sends you your
monthly wireless service bill).
See your Start Here guide for
information about what to do if you
forget a code or password.
I pressed the
power key, but
nothing
happened.
Be sure to press and hold P
(power key) until the display
appears and you hear an alert.
This could take several seconds. If
nothing happens, check that a
charged battery is installed.
The SIM card may be incorrectly
inserted. Check the SIM card to
make sure that it is inserted
properly as described in your
Start Here guide.
The display
says:
Insert SIM Card or
Check SIM Card
even though I
have inserted
my SIM card in
the phone.
The display
says:
SIM Blocked. How
do I unblock
my SIM card?
The display
says: Enter
Unlock Code. How
do I unlock my
phone?
Call your service provider (the
company that sends you your
monthly wireless service bill) to
obtain the PIN unblocking key
(PUK) code (see page 41).
Enter the factory-preset unlock
code (1234), or the last 4 digits of
your phone number. If this fails,
call your service provider (the
company that sends you your
monthly wireless service bill).
My phone asks The application you want is
locked. If you do not know the
for an unlock
unlock code, see your Start Here
code when I
guide.
try to open a
feature.
My phone
If you see { or | in the display,
does not ring. then the ringer is turned off. To
change the ring style, see your
Start Here guide.
Troubleshooting
Has the phone
been
damaged,
dropped, or
gotten wet?
Was a
non-Motorola
battery or
battery
charger used?
Answer
The battery level indicator should
have at least 1 segment showing
(Å). If it does not, recharge your
battery as described in your Start
Here guide.
If necessary, turn off your phone
and make sure that you have
inserted a valid SIM card as
described in your Start Here
guide.
The signal strength indicator
should have at least 1 segment
showing (#). If it does not, move
to an area with a stronger signal
to use your phone.
While on a call, press the upper
volume key on the side of your
phone.
Your phone may be muted. Press
UNMUTE (+) if necessary to
unmute the phone.
The following refer to specific problems:
Also, the ringer may be set to Silent
even though your phone is set to
an audible ring style. To set an
audible alert, see your Start Here
guide.
49
Problem
I tried to place
a call and
heard an
alternating
high/low tone.
I cannot
send/receive
calls.
Solution
Your call did not reach the
wireless system. You may have
dialed the number too soon after
turning the phone on. Wait until
the display shows the name of
your service provider before
making a call.
Make sure that you have a phone
signal (the signal strength
indicator should have at least 1
segment showing). Avoid
electrical or radio interference,
and obstructions such as bridges,
parking garages, or tall buildings.
Problem
My phone will
not send
voicemail
commands,
passwords, or
other codes.
Your phone also may have the
Call Barring feature turned on. If you
know the unlock code, you can
change this setting in the security
menu (M > Settings > Security).
My phone’s
display is too
dark.
Also, check to be sure your SIM
card is installed and working.
My phone has Make sure that your antenna is
poor reception not bent or damaged.
and drops
Also, make sure you have a phone
calls.
signal (the signal strength
Troubleshooting
I cannot hear
others on my
phone.
I cannot open
my text
message
inbox.
How do I see
the calls I sent
or received?
indicator should have at least 1
segment showing). Stay clear of
any obstructions such as bridges,
parking garages, or tall buildings.
While on a call, press the upper
volume key. Your phone display
should show the volume
increasing.
Also, make sure that your phone’s
earpiece is not blocked by its
carrying case.
Before you can use text
messages, you must set up the
message inbox (see your Start
Here guide).
To see the most recent calls you
dialed or received:
M > Recent Calls
> Received Calls or
Dialed Calls
50
Solution
You must send PIN codes and
passwords as DTMF tones while
on a call. You can set your
phone’s DTMF tones to be Long,
Short, or Off. If you have trouble
sending numbers, try changing
the DTMF setting.
1 From the home screen, press:
M > Settings > Initial Setup
> DTMF
2 Press S to scroll to Long or
Short.
My battery
didn’t last as
long as I
expected.
What can I do
to extend
battery life?
I am unable to
record a voice
note, voice
name, or voice
shortcut
My TTY device
doesn’t work
with my
phone.
I plugged the
data cable into
my phone but
my phone did
not beep. How
do I know if
the data cable
is ready to go?
3 Press SELECT (+) to select it.
Use the Brightness feature to
change the brightness level in
your display (see your Start Here
guide).
You can also use the Backlight
feature to change the length of
time that the display backlight
stays on (see your Start Here
guide).
Your battery’s performance is
affected by charge time, feature
use, temperature changes,
backlight use, and other factors.
For tips on extending battery life,
see your Start Here guide.
Try moving to a quieter location to
make your voice recording. Hold
the phone about 4 inches (10
centimeters) from your mouth,
and speak directly into the phone
in a normal tone of voice.
Your phone must be set to a TTY
mode for the phone to detect your
TTY device (see your Start Here
guide).
The beep indicates that you are
set up correctly. If you did not hear
a beep, make sure that both ends
of the data cable are
connected—the smaller end to
your phone and the larger end to
your computer.
Also, your computer may have
deactivated the port to save
power. Try opening an application
that uses the port, like a fax or
dial-up application, to
automatically activate the port.
Problem
My phone
beeped when I
attached the
data cable, but
my data and
fax
applications
do not work.
When sending
data with the
data cable,
why does the
computer
show a
connection
rate of 19200
Kbps?
Solution
Some wireless networks may not
support data or fax transmission.
If you are roaming on an
unfamiliar network, this may be
the case.
Also, remember that data and fax
transmission usually requires a
subscription. Call your service
provider for more information.
19200 Kbps is the data transfer
rate of the connection between
your computer and the phone in a
standard Circuit Switch Data
(CSD) connection. The rate of the
connection between your phone
and the network is displayed on
your phone, and will be either
14400 or 9600 Kbps.
Note: A GPRS connection may
have a higher data transfer rate.
I can’t end my
data call by
closing the
application on
my computer.
What can I do?
Try again in a few minutes. The
servers may be temporarily busy.
Troubleshooting
I launched the
micro-browser
but the display
says:
Network Not
Available.
I launched the
micro-browser
but the display
says: Server Not
Responding.
Try pressing O on your phone.
Also try disconnecting the cable or
turning off the phone. If possible,
always close the connection
through your computer. These
alternative methods may disrupt
the application on your computer.
You may be in an area without
service, or you may be connected
to a network that does not support
Internet access.
51
Index
A
D
H
accessories 28, 29, 30, 38
AIM 11
alarm clock 38
alert
creating 47
setting 24, 42
animation
downloading 9, 42
managing 44
screen saver 42, 44
wallpaper 42, 44
AOL Instant Messenger. See AIM
application, locking and unlocking 41
appointments. See datebook
data call
making 30
datebook
alarm clock 38
reminders 36, 37
synchronizing 31, 37
using 36
dialing a number 28
display
greeting 24
language 25
menu icons, showing or hiding 25
personalizing 25
drafts folder 6, 7, 8, 9, 14
DTMF tones
activating 28, 50
defined 28
sending 28
handsfree use 29
headset accessory, using 29
home keys, personalizing 25
home screen
menu icons, showing or hiding 25
selecting clock view 24
setting display text 24
B
barring calls 27
battery meter 35
Bluetooth 23, 29, 30, 31, 32, 38
browser messages 10
browser. See micro-browser
Buddy List. See AIM
C
calculator 39
calendar. See datebook
call
alert, setting 24
barring 27
calling card 18
conference call 27
costs 29
forwarding 27
speakerphone 30
timing 29
call cost information 29
call timers 29
caller ID 18, 19, 44
calling card call 18
camera 48
car kit 29
clock
selecting analog or digital 24
computer
connecting to phone 30
synchronizing data 23, 31, 37
conference call 27
credit information 29
currency converter 40
customizing the menu 25
52
E
email
deleting 15
draft 6, 7, 8, 14
inbox setup 13
locking 15
message status 14
outbox 14
personal folders 16
phone number, calling 15
reading 15
receiving 14
reminders 14
sending 14, 15
sending manually 15
email address, storing in phonebook
17
event alert 24
exchange rate, calculating 40
external device
connecting to phone 30
synchronizing data 23, 31, 37
F
fax call 30
fixed dial 28
forwarding calls 27
G
games 45
GPRS indicator 42
greeting 24
groove tunes 46
I
incoming call, forwarding 27
indicators
GPRS 42
message waiting 8, 10, 14
phonebook number type 17
voice name 17
information services 10
instant messenger. See AIM
J
Java applications 45, 46
K
key
left soft key 25
right soft key 25
voice 38
keypad volume, setting 24
L
language, setting 25
light ID, setting 21
lock application 41
lock SIM card 41
M
mailing list, creating 18
master clear 25
master reset 25
memory available 46
Memory is Full! message 9, 11, 14
menu
icons, changing in idle display 25
icons, converting to text 25
icons, showing or hiding 25
language, setting 25
personalizing 25
scroll 25
view, changing 25
wrap around 25
message
animation 9
browser messages 10
deleting 9
draft 9, 14
email 13
inbox setup 5
information services 10
locking 9
MMS template 7
MMS, defined 5
outbox 8
picture 9
quick note 6
quick view 11
reading 9
receiving 8
reminders 8, 24
ring tone 9
sending 5
SMS, defined 5
status 8
message waiting indicator 8, 10, 14
micro-browser
animation 42
background sessions 43
browser messages 10
browser setup 42
Java applications 45, 46
picture 42
ring tone 42
using 42
Web sessions 42
MMS template 7
MMS. See message
MotoMixer 46
multimedia letter
receiving 8
sending 7
multimedia message
receiving 8
sending 6
multimedia messaging service. See
message
my telephone number 3
N
network settings 33
New IM message 12
number
storing in phonebook 17
viewing your number 3
O
object exchange 33
1-touch dial, setting preference 22
outbox 8, 14
P
pause character 18
phone
alert, setting 24
clear stored information 25
connecting to external device 30
credit information 29
feature specifications 35
language, setting 25
network settings 33
reset all options 25
specifications 35
phone number
long numbers, storing 19
storing in phonebook 17
viewing your number 3
phone theme 43
phonebook
capacity, checking 22
category views 20
copying entries 21, 22
creating an entry 17
deleting an entry 19
dialing a number 19
editing an entry 19
email address, storing 17
entry category 17
entry details 17
light ID 21
list view, setting 19
long numbers 19
mailing list 18
number type indicator 17
number, storing 17
picture caller ID 18, 19, 44
primary number, setting 20
ringer ID 17, 21, 24
sorting entries 20
speed dial number 17, 18
synchronizing 23, 31
voice name, recording 18
photo
downloading 9, 42
managing 44
picture caller ID 18, 19, 44
screen saver 44
sending 6, 7
wallpaper 44
picture
downloading 9, 42
managing 44
screen saver 42, 44
sending 6, 7
wallpaper 42, 44
picture caller ID 18, 19, 44
PIN code
defined 41
entering 41
storing with phonebook entry 18
unblocking 41
PIN2 code
entering 28
unblocking 41
PUK code 41
PUK2 code 41
Q
quick note 6
quick view message 11
R
reminders
datebook 36, 37
defined 24
email message 14
information services message 10
text message 8
turning on/off 24
ring tone
creating 47
downloading 9, 42
editing with MotoMixer 46
sending 6, 7
setting as event alert 42
ringer ID
setting 17, 21
turning on/off 24
ringer volume, setting 24
S
screen saver 42, 44
scroll, menu 25
service dial 28
short message service. See message
shortcuts 25
standard 3
silent alert, setting 24
SIM applications 48
SIM Blocked message 41
SIM card
applications 48
locking 41
service phone numbers 28
SIM Blocked message 41
SIM Disabled message 41
unblocking 41
SIM Disabled message 41
SIM PIN code
defined 41
entering 41
unblocking 41
SIM PIN2 code
entering 28
unblocking 41
SMS. See message
sound
creating 47
downloading 9, 42
sending 6, 7
speakerphone
activating 30
automatic answer 30
speed dial
number, setting 17, 18
sorting phonebook entries 20
53
Start Here guide 1
synchronizing data 23, 31, 37
T
telephone number
storing in phonebook 17
viewing your number 3
theme 43
timers 29
TTY device 28
U
unblocking the SIM card 41
unlock application 41
user’s guide 1
V
video clip
downloading 9, 42
sending 6, 7
voice dial
dialing a number 19
dialing from headset 30
recording voice name 18
voice key
dialing a number 19
recording voice name 18
recording your voice 38
voice name
dialing 19
indicator 17
recording 18
voice record
playing 38
recording 38
voice shortcut 26
volume
keypad 24
ringer 24
W
wait character 18
wallpaper 42, 44
Web pages 42
Web sessions 42
U.S. patent Re. 34,976
54
motorola.com
8988485L64-O