Cover 509 DUAL GB
D
B
DK
F
GR
NL
GB
I
N
02/09/99
14:37
Side 1
Bosch Telecom GmbH
Produktbereich Endgeräte
Kleyerstr. 94,
60326 Frankfurt/Main,
Tel. (0 180) 5 2214 92
Fax (0 180) 5 2214 93
N.V. Robert Bosch S.A.
Rue Henri Genessestraat 1,
10 70 Bruxelles / Brussel
Tel. 0800 - 94 495
Robert Bosch A/S
Telegrafvej 1, 2750 Ballerup,
Tel. 44 89 89 89
Robert Bosch (France) S.A.
B.P. 170, 32 Avenue Michelet,
93404 Saint Ouen,
Tel. (0) 1 40 10 70 07
E
Robert Bosch ESPAÑA SA
Hermanos García Noblejas, 19
28037 Madrid
Tel. (34) 91 408 1700
A
Robert Bosch AG
Postfach 146, 1110 Wien,
Tel. (4 31) 7 97 22-0
CH
Robert Bosch AG
Industriestr. 31, 8112 Otelfingen,
Tel. (411) 8 471414
TR
Bosch Sanayi ve Ticaret A.S.
Ahi Evran cad No. 4,
Polaris Plaza/Kat 22
Maslak/Istanbul
Tel. (0212) 3 35 06 73
H
Robert Bosch Kft.
Postfach 405,1519 Budapest
Tel. (3 61) 2 69 83 40
Robert Bosch S.A.
162 Kifissou, 12131 Peristeri, Athens,
Tel. (30 1) 57 01 286
FIN
Robert Bosch BV
Neptunusstraat 71,
2132 JP Hoofddorp,
Tel. 0800 - 022 43 72
OY Hedoy Ab Telecom
Lauttasaarentie 50,
00200 Helsinki
Tel. (09) 682 8253
IRL
Beaver Distribution Ltd.
Greenhills Road, Tallaghl, Dublin 24,
Tel. (35 31) 4 515211
Robert Bosch Ltd.
Sales Communication Equipment
P.O. Box 98
Uxbridge, Middlesex UB9 5HJ
Tel. 0345 585220
L
SGP
Robert Bosch Pte Ltd
38c Jalan Pemimpin,
Singapore 57180,
Tel. 3 50 54 52
Robert Bosch AS
Postboks 629, 1411 Kolbotn,
Tel. 66 8170 00
ZA
Robert Bosch (Pty) Ltd.
Private Bag X118, Randjespark,
Midrand 1685
Rep. of South Africa
Tel. (011) 651-9600
P
Robert Bosch Lda.
Av. Infante D. Henrique, Lotes 1E, 2E,
Apartado 8058, 1801 Lisboa Codex,
Tel. (3511) 8 50 00 00
http://www.bosch-telecom.de
7910.2200 G B / 09.99
Robert Bosch Aktiebolag
Box 1154, 164 26 Kista,
Tel. (8) 7 50 15 00
GB
Central Import Export Corporation
Zone Industrielle, Rue des Jones,
1818 Howald,
Tel. (2) 40 30 60
Robert Bosch
Industriale e Commerciale S.P.A.
Via M.A. Colonna 35, 20149 Milano,
Tel. (3 92) 36 96-1
S
GSM 509
DUAL
User Guide
Cover 509 DUAL GB
02/09/99
14:37
Side 4
BOSCH EASY SETS
Precautions
For your safety
Medical electronics
Please pay special attention to the
following simple guidelines. Breaking the
rules may be dangerous or illegal.
Mobile telephones may interfere with the
functionality of inadequately protected
medical devices. Consult your physician
or the manufacturer of the medical device
if in doubt. Always switch off your mobile
phone before visiting a hospital and
observe the local regulations.
In-car safety
Do not use your mobile phone when
driving a vehicle except from in
emergency cases. Always park the
vehicle and take the ignition before
using the phone.
Interference with other
electronics
Mobile phones may interfere with other
nearby electronics if these are not sufficiently protected from radio signals. Do
not use your mobile phone near telephones, televisions, radios, personal
computers, etc.
Risk of explosion
Don’t use your mobile phone at petrol
stations, fuel depots, chemical plants, etc.
Always switch off your telephone before
entering such areas, and observe any
regulations.
Aircraft safety
The use of mobile telephones in an
aircraft may be dangerous to the
operation of the aircraft and is illegal.
Switch off your mobile phone before
boarding an aircraft. Before using your
mobile phone near an aircraft, consult
the crew.
Blasting
Don’t use your mobile phone where
blasting is in progress. Observe any
regulations.
Accessories for Bosch mobile phones
GSM 509 DUAL
GSM 509 DUAL
Radiation
As with other mobile radio transmitting
equipment, users are advised that for
satisfactory operation of the equipment
and for the safety of personnel, it is
recommended that no part of the human
body should be allowed to come too
close to the antenna during operation of
the equipment.
Children
A mobile telephone is not a toy. Keep the
phone in a safe place out of children’s
reach. Children may harm themselves
or others and they may damage the
phone.
Electrical safety
This mobile telephone is intended for use
when supplied with power from MA 1020,
MA 1021, MA 1022, MA 1023 and
MA 1024 chargers. The use of any other
battery charging equipment will invalidate
any approval given to this apparatus as
well as the manufacturer’s warranty.
Batteries
Batteries may explode if incinerated. To
prevent any injury or burn please observe
that the battery terminals never get in
contact with conducting objects or are
short circuited.
For the car
Handsfree Car Kit
Simple Car Holder
Cigarlighter Charger 12V/24V
For charging
Dual Slot Desktop Charger
Travel charger EU
Travel charger UK
Travel charger AUS
Travel charger US
For power
Light 600 mAh NiMH battery
Vibra-Alarm 600 mAh NiMH battery
High Power 1800 mAh NiMH battery
Outfit
Handsfree Headset
Belt clip
105
42
31
307
22
24
25
26
506
507
508
69
63
509 DUAL GB
02/09/99 15:12
Side 2
(Sort plade)
Contents
Preparing your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Making your first call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Getting to know your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
List menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Outgoing, answered and missed calls . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone book editing and status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Extra phone books . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SMS point-to-point messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SMS broadcasts and voice mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
12
13
14
16
Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Menu numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tones setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SMS setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone book setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call timers and charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Keypad lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
19
23
24
27
29
30
31
32
33
Conversation menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Keypad functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Display symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3
509 DUAL GB
02/09/99 15:12
Side 4
(Sort plade)
Preparing your phone
During charging, the battery symbols will flash
on and off from the bottom of the display and
up. It might, however, take about 5 minutes
before you can see these symbols in your
display (depending on the age of the battery).
When the battery is fully charged, all 4
symbols will be permanently displayed as long
as the phone is switched on. When your battery
needs recharging, the phone will emit a short
warning tone.
When you charge the battery, it should always be fully charged in order to read out the
battery capacity accurately.
Insert rechargeable battery
When changing the battery, your phone should
always be switched off. The on/off key is the
red function key on your phone.
1
1
2
2
Insert
3
Making your first call
The telephone will now start searching for your
home network. When connection is successfully established, the name of your network
operator will be displayed.
This telephone is designed for use in GSM
900 and GSM 1800 networks. Handover
between the two types of network takes place
automatically and seamlessly.
1
The battery supplied with this telephone is
completely discharged. The telephone will
initiate charging as soon as you have inserted
the charger plug in the bottom of the telephone. It takes 1.5 to 6.5 hours for the battery
to become fully charged, depending on the size
of the battery.
To obtain optimum battery performance in
daily use, wait until the battery is completely
discharged, before recharging to full capacity. It
is possible to use your phone while charging.
1
Switch off your phone and remove the
battery if attached to the phone.
2
Open the SIM card holder by sliding it to
the left and lifting it.
CLEAR
Place the SIM card in the small depression
on the phone.
4
Press down the SIM card holder and slide it
to the right.
5
Insert the battery and switch on the telephone (the phone will display a welcome
greeting).
6
4
REJECT ANSWER
2
Press
END
Press
Press
(»END«) to end the call.
Use the arrow keys
and
to increase
and decrease the speaker volume.
Connected to
+4596738000
END
MENU
CALL
(»CALL«) to make the call.
Press
(»ANSWER«).
Connected to
+4596738000
3
3
3
+4596738000
(NETWORK)
+4596738000
2
The phone rings.
Enter the phone number you want to call.
Insert SIM card
Before you can make a call on your mobile
phone you have to insert the SIM card. Please
make sure that any plastic remains from the
frame punching have been removed.
1
Making your first call
Remove
Charge the battery
Answering a call
MENU
(»END«) to end the call.
If you call a phone number which is diverted to
another phone number, the display might show
the phone number to which you are connected
and not the one entered by you.
If the phone cannot establish contact with
your network and you attempt to make a call,
the display will show »please redial later«.
Emergency calls
Most networks allow you to make emergency
calls (112) both with and without a SIM card.
Tip
Enter PIN code, if requested, and confirm by
(»OK«).
pressing
Read the following two pages to get to know
your phone
5
509 DUAL GB
02/09/99 15:12
Side 6
(Sort plade)
Getting to know
your phone
Getting to know your phone
Earphone
Four main functions
To get full benefit of your phone, remember the
following four main functions, three of which
you can enter when you have turned on your
phone and entered the pin code (if any), i.e.
when you are in standby mode:
Display texts
Phone book – Press
Use this main function to store entries in your
phone book or to access your phone book, when
you want to find a stored name and number.
List menu – Press
This is a menu where you can get information
about the different kinds of calls and messages you
have sent and received. You can also edit your
phone book and find extra phone books, if any.
Setup menu – Press
In this menu you have the possibility of setting
your phone according to your own personal wishes
and needs, such as selecting new ringing tones.
The fourth main function can only be entered
while you are having a conversation, i.e. when
you are in conversation mode:
Function keys
Conversation menu – Press
This menu offers different kinds of possibilities
such as putting a call on hold or joining more
calls.
Microphone
The function keys have different functions according to whether you are in standby or conversation mode. The display text above the key
will inform you of the actual function of the key
at any time.
Tip
Within a main function
Care of your phone
This is how your function keys work when you
have entered one of the main functions:
Do not try to open the phone as this might
damage vital parts. The phone contains no
components which can be repaired by the user.
Any repair requires expertise and should be
carried out only by an authorised service
centre.
To clean your phone, wipe over with a soft
cloth. Do not use alcohol or other solvents as
these will harm your phone.
Do not use your mobile phone in high
humidity environments or where the temperature falls below -10˚ or exceeds +55˚ C.
• Press
and
to scroll through the
menus to see your options;
• press
to select and accept options; and
• press
to exit the choice you have made
or to clear digits or characters that you have
entered.
Take notice of the display texts when you use
your phone. In this user guide, references will
be made to the display text instead of to the
keys
and
.
Accessories
The use of other types of chargers, batteries or
any accessories other than those recommended
for use with this telephone will invalidate any
approval given to this apparatus as well as the
manufacturer’s warranty on the telephone.
Dynamic menus
It is important to note that the menus are dynamic. This means that your phone does not always give you all the options listed in this user
guide. This is because the option is only listed –
if you really have the option. For instance you
cannot select the list of missed calls if there are
no missed calls.
Batteries
Never dispose of old batteries in your household refuse. Return them to the place of purchase or take them to a recycling centre so that
they may be disposed of in an environmentally
friendly manner.
SIM card limitations
Another important issue is your SIM card. In
this user guide you can see the full capability of
your phone, but the presence of some of the
features depends on your network operator
and/or your SIM card. Where a feature relates
to the network, you will see this symbol
in
the user guide.
Please contact your network operator for
further details.
When you go through this user guide, you
will see that there is a chapter for each of
these four main functions
6
7
509 DUAL GB
02/09/99 15:12
Side 8
(Sort plade)
Phone book
Phone book
You can store names and telephone numbers in
your phone book. The entries are stored on the
SIM card, and the number of entries as well as
the length of a name or a telephone number
depend on the capacity of the SIM card.
There are several characters available on
each key, as shown in the table below. Press
once to get the first character, twice to get the
second character, and so on. When you need a
space between two characters, press .
Holding down one of the keys for one second
will give you the option of lower case. Just
press the key again for one second to return to
upper case.
1.,;:’”!¡?¿
&%£$¥@§¤
TUV8ÜΘ
tuv8üù
DEF3É∆
def3éè
WXYZ9Ξ
wxyz9
GHI4Γ
ghi4ì
*+
Enter the phone number.
2
Press
3
Enter name and press »OK«.
4
Press »OK« to accept the suggested number
or
Press »CLEAR« and enter a location
number of your own choice (up to 3 digits).
Store frequently used numbers in location
numbers 1 to 9 so that you can speed dial them
by pressing only one key. (Speed dialling is an
option of the Setup menu, see page 26).
If you choose a location number that is occupied, the phone will give you the option of
overwriting the existing entry. If you do not
want to overwrite the existing entry, press
»EXIT« and the location number suggested
will be visible again.
V
MNO6ØÑÖΩ
mno6øñöò
1
The telephone will suggest that the
name/number should be stored under the first
vacant location number.
PQRS7ßΠΦΨΣ
pqrs7ß
ABC2ÆÅÄÇ
abc2æåäà
JKL5
jkl5
How to store a name
and a telephone number
If you have a voice mail number stored in
your phone book this should be stored under
location 1. On some networks this has already
been done by the operator.
0- / ( ) = < >_
Space #
If you enter the phone number with the help of
"+" followed by the national code you can use
your phone book abroad without having to
think about international codes.
Press »CLEAR« briefly to delete one character.
Press »CLEAR« for one second to delete the
entire display.
8
Prefix telephone numbers
Prefix phone numbers are used by e.g.
companies, and are built up in the way that the
first digits of the number are the prefix (the
same for everybody), and the last digit(s) is/are
related to the specific person or office you want
to call. If you make frequent calls to different
persons or offices in e.g. a company with a
prefix telephone number, you might want to
store only the prefix part of the telephone
number in your phone book, giving you the
possibility of adding the additional digits to the
number when you make the call.
This is done in exactly the same way as you
store a normal phone number in your phone
book. Only, instead of each of the additional
digits that varies from time to time, you enter a
»W«. This is done by holding down the -key
for approx. 2 seconds.
How to find an entry in your
phone book
1
Enter the phone book:
2
Scroll through the phone book:
3
Call the number: Press »CALL«.
and
If you have stored many numbers in your
phone book, it might be easier for you to find
an entry by entering one or more letters of the
name you wish to find.
If you want to call a prefix phone number you
must enter the digits to replace the »W« after
having pressed »CALL«.
How to edit or delete a
name/number
If you want to edit or delete a name/number or
see the status of your phone book, you have to
go through the List menu (see page 12).
Phone numbers with extension number
In some places, extension numbers are used.
Extension numbers work in the way that you
dial a full phone number, and then, after a
pause, you dial the extension number.
If you want to store a phone number with an
extension number in your phone book, you
have to enter a pause between the main
number and the extension number. This is
done by pressing the -key for one second
until the pause code »P« appears on the display.
Extra phone books
Some SIM cards offer you the possibility of
having extra phone books for different
purposes. If you have one or more of these
phone books, you will find them through the
List menu (see page 13).
Phone book sorting
To sort the names in your phone book, enter
the Setup menu (see page 29).
Who is calling?
Calling Line Identification (CLI) is a network
feature whereby the phone numbers of callers
to your phone are shown on your phone's
display. If your caller is one of the entries that
you have stored in your phone book, then his
name will appear on your display.
9
509 DUAL GB
02/09/99 15:12
Side 10
(Sort plade)
List menu
Outgoing, answered, and
missed calls
List menu
General
Information numbers
Enter the List menu:
Scroll through the options:
and
Select an option: Press »SELECT« or »OK«
Get one level back: Press »EXIT«
Get back to standby: Hold »EXIT« down
• Find entries
• How to see the list of missed calls at a
later moment
As soon as you have used the list, either to
make a call or to view numbers, the symbol
will disappear from the display. However, the
list will always be available through the List
menu, where you can also select and call a
number.
The telephone number will be deleted from
the list as soon as you have called it, but you
can find it again on the list of last outgoing
calls.
First
Enter the List menu by pressing
Select one of the below mentioned options
Fixed numbers
• Find, add, edit or delete entries
• See status
The List menu offers you information about
your latest outgoing, answered and missed calls
as well as SMS messages. Further, this is the
menu you enter to edit your phone book, and if
you have extra phone books available on your
SIM card, this is where you find them.
Remember that
indicates that the option
depends on your SIM card and therefore may
not be available.
Service numbers
• Find entries
Barred numbers
• Find, add, edit or delete entries
• See status
Own numbers
Here is a list of options that you get when
you enter the List menu.
• Find, add, edit or delete entries
SMS (Short Message Service)
Outgoing calls
•
•
•
•
•
• View names/phone numbers of your latest
outgoing calls
Answered calls
Inbox for received point-to-point messages
Outbox for sent point-to-point messages
Send new messages
Read broadcast messages
Check your voice mails
• View names/phone numbers of your latest
answered calls
Missed calls
Outgoing calls
Your phone will show your last dialled
telephone numbers. If you want to call one of
the numbers again, select it and press »CALL«
to initiate the call.
Answered calls
Your phone remembers the last 10 calls
your phone has received. It is possible to call
one of the numbers by selecting it and pressing
»CALL« to initiate the call.
How to copy one of the numbers
into your phone book
You can copy a number from the list of
outgoing, answered, or missed calls into your
phone book.
You just select the wanted phone number
from the actual list, press
to access your
phone book and give the number a name and a
location.
Missed calls
Your phone remembers the last 10 incoming calls which you did not answer.
The display will tell you how many missed
calls your phone has received, since the last
time you touched it. If, for instance, there are 5
missed calls the standby display will show .5.
As the telephone registers only identified
calls in the list, the number of missed calls
shown on the display and the number of phone
numbers actually listed may be different.
How to delete call information
You can delete all entries stored in the outgoing, answered, and missed calls lists. This is
done by entering the Setup menu (see page 29).
• Immediate access to the list of missed calls
As long as the symbol is shown in your
display, you get immediate access to the list of
missed calls simply by pressing
. You can
then select and call a number.
• View names/phone numbers of you latest
calls received but not answered
Phone book
• Find, add, edit or delete entries
• See phone book status
Tip
On the following pages, these options will
be explained in greater detail
10
11
509 DUAL GB
02/09/99 15:12
Side 12
(Sort plade)
List menu
List menu
Phone book editing and status
Delete entry
Use this option if you want to delete one of the
entries in your phone book. Select the entry
you want to delete and press »DELETE«.
First
Enter the List menu by pressing
Select »Phone book«
Status
The telephone will display the total number of
locations in your phone book and inform you
how many of these are free.
Phone book
The List menu offers you the following options
concerning your phone book:
»Find entry«
»Add entry«
»Edit entry«
»Del. entry«
»Status«
Extra phone books
First
Barred numbers
Enter the List menu by pressing
Select one of the below mentioned options
In this phone book you can store numbers to
which you do not allow any calls. This phone
book operates in exactly the same way as your
ordinary phone book.
In order to be able to make such a phone
book you also need to have a PUK2 code from
your network operator and to use a PIN2 code
of your own choice.
See page 29 in the Setup menu for how to use
barred dialling.
Depending on your SIM card you may have
different extra phone books. These phone
books will be visible in the phone display only
if they are available and enabled.
Information numbers
Numbers stored in this phone book are typically numbers for taxis, airports, hotels, weather, news, etc. The contents are defined by your
network operator and cannot be changed by
you.
Find entry
This option gives you the possibility of finding
an entry in your phone book. As described in
the previous chapter about the phone book,
this can also be done simply by pressing
when you are in standby mode.
Own numbers
This is simply an extra phone book which gives
you the possibilities of finding, adding, editing
and deleting the entries – just like the ordinary
phone book.
For instance, it is possible to use this extra
phone book if the phone is used both as a
business phone and a private phone. You can
then store the business numbers in the ordinary
phone book and your private numbers in this
phone book.
Fixed numbers
With the help of this extra phone book you can
restrict the use of your phone only to numbers
stored in this special phone book. This telephone book operates in exactly the same way
as your ordinary phone book.
However, in order to be able to make such a
phone book you need to have a PUK2 code
from your network operator and to use a PIN2
code of your own choice.
See the Setup menu page 29 for how to use
fixed dialling.
Add entry
You can use this option when you want to add
a new entry to your phone book. This can also
be done simply by using the
key, cf. the
chapter about the phone book.
Edit entry
You have the possibility of changing an existing
name or number in your phone book. Select
the name/number you wish to change and edit
it using »CLEAR« to delete digits and/or
letters, and use the alphanumeric keypad to
enter new digits and/or letters.
Service numbers
This service number phone book contains
customer care, hotline service numbers, etc.
The contents are defined by your network
operator and cannot be changed by you.
12
13
509 DUAL GB
02/09/99 15:12
Side 14
(Sort plade)
List menu
List menu
SMS point-to-point messages
SMS point-to-point messages
The phone number of the message sender or
the name (if stored in your phone book) will be
displayed in front of the message. You can now
scroll through the message by using the arrow
keys.
The message is automatically stored in the
inbox if you do not delete it. In addition to
reading the message, you can press
»OPTION« and
First
Enter the List menu by pressing
Select »SMS«
SMS (Short Message Service)
SMS are short text messages that your phone
can receive and send via the network. On some
networks you have to subscribe to this facility.
There are two types of SMS: point-to-point
messages which you can both receive and
send, and broadcast messages which you can
only receive.
–
–
–
–
–
delete it
send a reply
forward it to another phone number
edit it before sending
extract a phone number, if any, from the
message to call or to store in your phone
book
– call back to the sender
Entering the SMS menu gives you these
options:
»Inbox«
»Outbox«
»New SMS«
»Broadcasts«
»Voice mail«
When a message has been read it will be
indicated by a √ to the left of the date of
receipt.
• How to read a message at a later
moment
If you have used your phone after having
received a new message, you have to enter the
Inbox to read it.
The SMS indicator
tells you that there
are still unread messages, and remains on the
standby display until all messages have been
read.
Inbox
A new incoming message will be indicated by
the SMS indicator on the standby display, as
well as by a message tone (if enabled – see the
Setup menu page 23). The display will also tell
you how many new messages there are for you.
• Immediate access to a new message
When the symbol appears in your display
together with the number of new messages, you
get immediate access to your inbox simply by
pressing
. The display will show date and
time of each individual message received, and
you can then select and read the message(s)
you want to.
Outbox
The messages you send are automatically
stored in the outbox where you can always
find them again. If you enter the outbox and
select one of your messages, you can press
»OPTION« and
Start entering your message using the keypad
in the same way as you enter a name or a
telephone number in the phone book.
moves the cursor to the left,
moves the
cursor to the right. Delete unwanted characters
by pressing »CLEAR«.
–
–
–
–
If you want to use the -symbol in your
SMS message press the -key briefly twice.
delete it
forward it to another phone number
edit it before sending
extract a phone number, if any, from the
message to call or to store in your phone
book
Once you have ended your message by
pressing »OK«, you can »Send SMS« at once
or you can »Save SMS« and send it later on.
If you select »Send SMS« the phone will ask
for a phone number to send the message to.
Either enter a phone number or select one
from your phone book using
. Accept by
pressing »OK« and your message will be
sent.
• Delete messages from Inbox/Outbox
If the SMS indicator
is flashing, it
indicates that the message memory is full.
You can delete all messages stored either in
the Inbox or the Outbox at the same time.
This is done by entering the Setup menu, see
page 28.
New SMS
To send a message you have to enter your network operator's telephone number for this
special service. Further, you have to set up the
validity period you want for your messages and
confirm that you want to send the message as a
text.
To set up these parameters once and for all,
you must enter the Setup menu (page 27). If
you do not do so, you will be asked for a
specification each time you wish to send a
message.
Once the parameters are set up, you enter the
option »New SMS«.
Continues
See the following page
14
15
509 DUAL GB
02/09/99 15:12
Side 16
(Sort plade)
List menu
SMS broadcasts and voice mail
In addition to reading the message, you can
press »OPTION« and
First
Enter the List menu by pressing
Select »SMS«
–
–
–
–
Broadcasts
If you want to receive broadcast messages you
have to enter the Setup menu (see page 28) to
set up different features.
Broadcasts are general messages broadcast to
a group of subscribers. On some networks you
have to subscribe to this facility, on others you
just have to be a network subscriber. Broadcasts are typically local weather and traffic
reports, stock market prices, sports results, etc.
If you have selected Roaming, i.e. if you are
abroad and connected to a foreign network,
you may be able to receive broadcasts from
other networks, too.
The messages are transmitted in numbered
channels and in general each channel will
contain information of the same type. Broadcasts may be sent out in different languages.
Contact your network operator for further
details.
delete it
store it on your SIM card
forward it to another phone number
extract a phone number, if any, from the
message to call or to store in your phone
book
A broadcast message will be deleted when you
switch off your telephone – even if the message
has not been read.
Voice mail
Some networks offer a voice mail function
where you can listen to your voice mails just by
selecting the sub menu »Voice mail«. Other
networks send you an SMS point-to-point
message (see page 14) when you receive a new
voice mail, and you will then have to call your
network operator’s voice mail number to listen
to your voice mails. Contact your network
operator for further information.
• How to read a broadcast message
A broadcast message is scrolled twice on the
display at the time of reception. If you do not
see it at that time, you can read it by selecting
»Broadcasts«.
The display will show the broadcast ID
number and you can thus identify the kind of
message received. Messages are read in exactly
the same way as point-to-point messages. A
read message will be marked by √.
Setup menu
General
SMS setup (Menu 4)
Enter the Setup menu: Press »MENU«
Scroll through the options:
and
Select an option: Press »SELECT« or »OK«
Get one level back: Press »EXIT«
Get back to standby: Hold »EXIT« down
41
42
43
Phone book setup (Menu 5)
51
52
53
54
The Setup menu offers you the possibility of
setting the phone according to your own
personal wishes.
61
62
63
64
65
Call divert
Call barring
Call waiting
Closed user group
Outgoing call ID
Line select
71
72
73
74
75
Ringing tone
Trembler
SMS message tone
SMS broadcast tone
Key tone
Factory settings
PIN code
SIM lock
Network password
Encryption indication
Line lock
Calculator (Menu 8)
Open menu (Menu 9)
Phone setup (Menu 3)
31
32
33
34
35
36
37
38
39
Last call
Total calls
Reset timers and charge
Show timer and credit
Call charge
Security (Menu 7)
Tones setup (Menu 2)
21
22
23
24
25
26
Fixed dialling on/off
Barred dialling on/off
Phone book sorting
Delete call information
Call timers and charge (Menu 6)
Call setup (Menu 1)
11
12
13
14
15
16
Send SMS setup
Broadcast setup
Delete SMS
Language
Auto redial
Network selection
Power saving
Car kit
Greeting
Speed dialling
Any key answer
Factory settings
The availabilility and the name of this menu
depends on your SIM card. The options are
defined by your network operator and allow
you to set up a dialogue between you, your
SIM card, and your network operator. If this
menu is available, it will be shown first when
you enter the Setup menu.
Tip
On the following pages, the above options
will be explained in greater detail
16
17
509 DUAL GB
02/09/99 15:12
Side 18
(Sort plade)
Setup menu
Setup menu
Menu numbers
Call setup (menu 1)
As it appears from the survey at page 17, the
different functions of the Setup menu are
identified by a number. This menu number is
not automatically displayed on the telephone.
If you want to see the number you must press
the 0 (zero) key. The menu number will then
be indicated by up to 6 digits.
Divert all calls
You simply divert all calls that are made to
your phone. (If you have chosen to have all
calls diverted, the call divert indicator
will
be visible on the left side of the standby
display.)
First
Enter the Setup menu by pressing »MENU«
Select »Call setup«
The Call setup menu gives you different
options concerning your incoming and
outgoing calls:
Example: »62«
6 = Menu 6: Call timers and charge
2 = Sub menu 2: View total calls
Divert all unanswered
This is an umbrella function that covers the
next three options at the same time; i.e. it
diverts calls to your phone:
»Call divert«
»Call barring«
»Call waiting«
»Closed user group«
»Outgoing call ID«
»Line select«
After a short period the display returns to the
menu text.
A √ before the sub menu indicates the one
you have selected.
– if your line is busy
– if you do not reply
– if there is no contact to the network
Divert if busy/no reply/no contact
If you wish, these three functions can be
selected individually. An example: If you want
calls made to your phone to be diverted only if
your line is busy, you select »Divert if busy«.
Call divert
Shortcut to the Setup menu
If you want to divert your incoming calls to another phone number, you have to:
As you become more familiar with the Setup
menu, you will probably find it easier to access
some of the menus simply by pressing the
menu number.
For example, to see the duration of your total
calls:
1
Select one of the below mentioned options of
call divert.
2
Register your call divert.
1 Press »MENU«
Different options of call divert
2 Press »62«
Entering call divert gives you the following options:
Status
You have the possibility of checking if your
phone is diverted in any of the above mentioned ways.
Cancel all
You cancel all of your call diverts at the same
time.
»Divert all calls«
»Divert all unanswered«
»Divert if busy«
»Divert if no reply«
»Divert if no contact«
»Status«
»Cancel all«
Register your call divert
When you have selected one of the five mentioned options for diverting calls, you will be
asked to register the call divert. This means
specifying certain features for the call divert.
Continues
See the following page
18
19
509 DUAL GB
02/09/99 15:12
Side 20
(Sort plade)
Setup menu
Setup menu
Call setup (menu 1)
You find the option of activating/deactivating
by selecting the specific call divert you want to
activate/deactivate and then select
Register your call divert
Once you have selected »Register« your telephone will guide you through the following
steps:
»Deactivate« or »Activate«.
If you try to deactivate/activate a call divert
and your network does not allow this option,
your display will tell you that the service is not
available. In that case you must cancel a call
diversion by selecting »Cancel«. Next time you
want your incoming calls diverted, select
»Register«.
Divert delay (only if you have selected to
divert »if no reply« or »all unanswered«). This
option gives you the possibility of specifying
the period of time that elapses before the call is
diverted. As appears on your display, you can
select »Use default delay« or select a period
from 5 to 30 seconds.
Phone number. Finally, you will be asked
what number to divert to. Calls can be
diverted to a telephone number stored in
your phone book or to any other number.
Access your phone book by pressing
or
enter a phone number via the keypad.
Call setup (menu 1)
• Roaming calls: If you want outgoing calls
to be barred when you are connected to a
foreign network (this still leaves you the
possibility of making calls to your home
country).
First
Enter the Setup menu by pressing »MENU«
Select »Call setup«
Call barring
Incoming calls gives you two new options to
consider:
You can set up call barring for different types of
outgoing and incoming calls to restrict the use
of your phone. To make use of this service you
need to get a 4-digit password from your
network operator. When you have this code,
you must:
• All calls: If you want to bar all incoming
calls.
• Roaming calls: If you want incoming calls
to be barred only when you are connected
to a foreign network.
1 Select one of the below mentioned
options for call barring.
Status gives you the possibility of checking if
your phone is barred in any of the above mentioned ways.
2 Activate your call barring.
Note: Do not confuse call barring with the
barred number phone book. The barred
number phone book only relates to the barring
of specific numbers entered by you.
Note: Your selection of a specific kind of call
divert does not only give you the possibility
of registrating it. At this level, you also have
the possibility of deactivating/activating (see
below), the option of seeing the status for this
specific kind of call divert by selecting
»Status« as well as the option of cancelling
this specific kind of call divert by selecting
»Cancel«.
Cancel all gives you the possibility of
cancelling all of your call barrings at the same
time. You will then be asked to enter the 4-digit
password provided by your network operator.
Different options for call barring
You have different options concerning the
kinds of calls you wish to bar. When selecting
call barring you must choose between:
Activate your call barring
Once you have selected the kind of call barring
you want, you activate it by pressing »OK«.
You will then be asked to enter the 4-digit
password provided by your network operator.
»Outgoing calls«
»Incoming calls«
»Status«
»Cancel all«
Deactivation/activation
On some networks you have the possibility of
activating and deactivating your call divert.
This means that when you have registered a
call divert, you can select to deactivate it, and
then at a later moment activate it again. Your
telephone will then remember your last
registration and you will not have to select
divert delay and phone number again.
Note: Your selection of a specific kind of call
barring does not only give you the possibility
of activating it. At this level, you can also see
the status of the chosen kind of call barring
by selecting »Status«, or cancel the chosen
kind of call barring by selecting »Cancel«.
Outgoing calls gives you three new options to
consider:
• All calls: If you want to bar all outgoing
calls (calls to Emergency Services can still be
made).
• International calls: If you want to bar all
outgoing international calls.
20
21
509 DUAL GB
02/09/99 15:12
Side 22
(Sort plade)
Setup menu
Setup menu
Tones setup (Menu 2)
Call setup (menu 1)
First
Outgoing call ID
Enter the Setup menu by pressing »MENU«
Select »Call setup«
You can choose whether you want your phone
number to be shown or not at the next
outgoing call. Your options at this point are:
Call waiting
»Show ID for next call«
»Hide ID for next call«
During a conversation, your telephone can
notify you that a new call is waiting. This is
indicated by a special ringing tone in the
earphone and gives you the option of
answering or rejecting the new call.
When selecting »Call waiting« from the Call
setup menu you get three options:
Line selection
Some network operators offer Alternate Line
Service. This allows you to have two separate
speech lines and phone numbers on the same
telephone. If you have two separate lines, you
can alternate between these by entering this
sub menu. In the standby display the small
number on the left or the right side of the
signal strength indicator (cf. page 39) informs
you whether you are on line one or line two.
»Activate« – to activate call waiting
»Cancel« – to cancel call waiting
»Status« – to see whether call waiting is
activated or not
See the Conversation menu on page 34 for
further details on how to handle multi-party
calls.
Closed user group
This is a network feature by which the use of
your telephone is restricted to certain phone
numbers within a group defined by the network operator and the owner of the SIM card.
You may be a member of different groups.
Each group has its own ID number.
The network defines which group is your
default user group. You have the option of
calling outside the group – perhaps at a higher
charge.
First
SMS message tone
Enter the Setup menu by pressing »MENU«
Select »Tones setup«
Your telephone can alert you to the arrival of a
point-to-point message by means of different
alert tones. You have the option of setting the
message tone volume to high, medium, low, or
off, and the option of selecting between the
same 27 tone patterns as for your ringing tone.
The Tones setup menu gives you different
options for the tones that your phone offers you
for various functions:
»Ringing tone«
»Trembler«
»SMS message tone«
»SMS broadcast tone«
»Key tone«
»Factory settings«
SMS broadcast tone
Your telephone can alert you to the arrival of a
broadcast message by means of different alert
tones. Your options are the same as mentioned
above under SMS Message tone.
Ringing tone
Key tone
You can adjust the ringing volume level and
select the ringing tone according to your
surroundings and preferences.
Ringing volume levels are high, medium,
low, escalating, and off. If the ringing tone is set
to »off« you will see the
symbol in the
standby display.
You have the option of selecting between 27
different ringing tone patterns. While you are
making your selection, the displayed ringing
tone will sound.
You can disable all kinds of tones by pressing
»MENU« and then
. In that case the symbol
will be flashing in the display. Just press
»MENU« and
again to revert to your
original settings.
To help you keep check on your dialling, you
can choose between 8 different tone patterns
for your keypad. The chosen tone will follow
every key pressed.
Factory settings
This option brings you back to the original
tones setup of your phone. The phone is set up
by the manufacturer as follows:
Ringing volume level:
Ringing tone:
Trembler:
SMS Message tone:
SMS Broadcast tone:
Key tone:
Trembler
If you have a trembler battery you can select
whether the trembler should be active or not
at an incoming call.
22
23
Loud
British
Off
Simple
Discreet 1
3
509 DUAL GB
02/09/99 15:12
Side 24
(Sort plade)
Setup menu
Setup menu
Phone setup (Menu 3)
First
Auto redial
Enter the setup menu by pressing »MENU«
Select »Phone setup»
If the phone number you are calling is busy,
you can let your phone make up to 10
automatic redial attempts. A redialling success
tone sounds when the attempt is successful.
When you call a number that is busy do not
press »EXIT« unless you want to cancel the
auto redialling attempts.
The Phone setup menu offers you the
possibility of setting some of the telephone's
functions according to your own personal
wishes:
»Language«
»Auto redial«
»Network selection«
»Power saving«
»Car kit«
»Greeting«
»Speed dialling«
»Any key answer«
»Factory settings«
Phone setup (Menu 3)
Manual selection
Your phone will always start searching for the
network with which it was in contact when it
was switched off. If the phone cannot locate
this network, it will present some alternative
networks on the display, and you can then
select one manually. You can select any network from the list, but your phone can get in
contact only with co-operating networks
(Roaming) – except for emergency calls.
Power saving
To save your battery and thus increase both
conversation and standby times you can choose
whether you want the display contents to be
visible or not in standby mode. Select »Display«
and then »Remains on« if you want it to be
visible, and »Switches off« if you want it not to
be visible. The display will then switch off after
3 minutes in standby mode.
The backlight will always switch off after 10
seconds if »Backlight« is set to »Switches off«
(except when connected to a handsfree car kit).
However, you have the option of having the
backlight switched off permanently by selecting
»Always off«.
Network selection
Phoning abroad demands the use of a foreign
network. You can select one manually or let
your telephone do it for you automatically. To
make the choice you must enter this network
selection sub menu which gives you three
options:
»Automatic selection«
»Manual selection«
»Set preferred list«
Language
The display language of your phone is normally the national language of the country in
which you purchased your SIM card. If this is
not the case the display language will be English. You do, however, have the option of
choosing between different languages using this
menu.
If, by mistake, you select a language which
you do not understand you can always return
to the original language by pressing the
following keys:
0000 .
Automatic selection
Your phone will automatically try to reach your
home network first, then, alternatively to find
another available network. You have the
possibility of establishing a preferred list of
networks (see below).
Set preferred list
The list of networks on your SIM card defines
the order of preference in which your phone
will select a network in automatic mode. Network operators offer different services and call
charges; therefore it may be advantageous to
make your own preferred list. Enter the
individual networks in your own order of
preference and store them on your SIM card.
To do this, select the empty location in which
you want to store the new network. Pressing
»EDIT« will give you a list of available networks. Find a network you wish to store in
your preferred list, and press »OK«. If you
select a currently used location and press
»EDIT«, the former occupant can be deleted
when you enter the new one. Just press »EXIT«
to leave the list as it was.
Once a network is stored in the preferred list,
you can always see the country and network
code of the actual network by pressing »EDIT«
in the Set preferred list option.
Car kit
This feature is only effective if the phone is
connected to a handsfree car kit. See page 37
for more information.
Greeting
You can change the welcome greeting of your
phone according to your own wishes. Delete
the old greeting by holding »CLEAR«, enter
the new greeting via the keypad and confirm
by pressing »OK«.
Continues
See the following page
24
25
509 DUAL GB
02/09/99 15:12
Side 26
(Sort plade)
Setup menu
Setup menu
Phone setup (Menu 3)
First
SMS setup (Menu 4)
First
Factory settings
Enter the setup menu by pressing »MENU«
Select »Phone setup»
Language:
Autoredial:
Network:
Power saving:
Display:
Backlight:
Car kit:
Auto answer:
Power off:
Greeting:
Speed dialling:
Any key answer:
If you turn on the speed dialling function, it is
possible to make calls to any number stored in
the phone book more easily by using the
location number (up to 3 digits). You will then
just have to press the location number for one
second (if the location number consists of more
than 1 digit, press the first digit(s) and hold the
last digit for one second). The call will then be
automatically initiated. Further, this function
gives you a shortcut to your last outgoing call:
Press 0 (zero) for one second and the call will
be initiated automatically.
Automatic
Off
Automatic selection
With the SMS setup menu you can set up the
necessary features for sending point-to-point
messages and for receiving broadcast messages.
These are your options:
Remains on
Switches off
»Send SMS setup«
»Broadcast setup«
»Delete SMS«
Off
Automatic
Welcome
On
Off
Send SMS setup
This is the sub menu to enter if you want to set
up the parameters for sending an SMS pointto-point message. You have two options:
5
You will now be asked to specify the kind
of teleservice you want. Select »Text« and
press »OK«.
6
The menu now returns to »Service centre«.
Press »SELECT« and then »OK«.
7
Now the name and the number of the service
centre that you have set up will be
displayed. Press »SELECT«.
Once a service centre has been selected, these
parameters will automatically be used for
sending all future messages through this service
centre.
»Service centre«
»Reply path«
Any key answer
Having stored a service centre number, you
have the option of adding a new service centre,
deleting a stored service centre or editing a
stored service centre. (The option of storing
more than one service centre may not be
available with all SIM cards).
Service centre
Your telephone will guide you through the
parameters that you have to set up:
If you turn on this function you can answer an
incoming call by pressing any key you like
except for the left function key and the arrow
keys.
You will now have different options of
specifying a validity time. This is the period
of time that the message will remain with
your network operator if for some reason it
cannot be delivered at once. Confirm your
choice by pressing »OK«.
Enter the Setup menu by pressing »MENU«
Select »SMS setup«
This option brings you back to the original
setup of your phone. The phone is set up by
the manufacturer as follows:
Speed dialling
4
1
* Accept to add a service centre by pressing
»OK«.
2
3
* Enter your network operator’s phone
number for this special service (remember
to add "+" and national code before the
number). Confirm by pressing »OK«.
Reply path
For messages that have to be sent via several
service centres to reach the recipient, some networks offer the feature of sending a reply, if
any, back to you through the same chain of
service centres. This is called a reply path and
you can select whether you want it to be on or
off.
* Enter the name of your network operator
and press »OK«.
* Some network operators have already
entered their own name and telephone
number; in that case you just have to select it
by pressing »OK«.
Continues
See the following page
26
27
509 DUAL GB
02/09/99 15:12
Side 28
(Sort plade)
Setup menu
Setup menu
Phone book setup (Menu 5)
SMS setup (Menu 4)
First
barred dialling phone book the call will be
refused.
To enable the barred dialling phone book
you have to enter your PUK2/PIN2 code.
First
Enter the Setup menu by pressing »MENU«
Select »SMS setup«
Enter the Setup menu by pressing »MENU«
Select »Phone book setup«
With the Phone book setup menu you have the
following four options for your phone book(s):
Broadcast setup
To be able to receive SMS broadcasts you must
enter the Broadcast setup which gives you the
following options:
Phone book sorting
You have the option of selecting whether you
want your phone book sorted by name or by
location.
»Fixed dialling«
»Barred dialling«
»Phone book sorting«
»Delete call information«
»Broadcast channels«
»Broadcast language«
»Broadcast setting«
Delete call information
You can delete all entries stored in the outgoing, answered and missed calls lists. Enter
this option and select the list which you want to
delete.
Fixed dialling
This option is only available if you have
defined and stored fixed numbers in an extra
phone book (see page 13). In that case, this
option allows you to select whether you want
the fixed dialling function to be on or off (to
enable this function you have to enter your
PUK2/PIN2 code).
If you have turned on the fixed dialling
function, your ordinary phone book will not
be visible on the display and can thus not be
accessed. However, it will, of course, remain on
your SIM card and can be accessed again by
turning off the fixed dialling function.
Broadcast channels
This option allows you to set up a list covering
the kind of information you wish to receive.
The display will show you various locations in
which you can store the individual channels.
Pressing »EDIT« will give you a range of different kinds of information among which you
can select the one(s) you want to receive.
Broadcast language
Some network operators offer broadcast messages in different languages. This option gives
you the possibility of selecting between different languages or simply selecting all languages.
Barred dialling
This option is only available, if you have a
barred dialling phone book on your SIM card
and if you have defined and stored barred
numbers in this phone book (see page 13). In
that case, this option allows you to select
whether you want the barred dialling function
to be on or off. Any attempt to make a call will
make the phone compare the dialled number
with the numbers stored in this special phone
book. If the dialled number is stored in the
Broadcast setting
Finally, this option offers you to select whether
you want the broadcast function to be on or off.
Delete SMS
This option allows you to delete all messages
stored in your inbox or your outbox.
28
29
509 DUAL GB
02/09/99 15:12
Side 30
(Sort plade)
Setup menu
Setup menu
Call timers and charge (Menu 6)
First
Show timer and credit
Enter the Setup menu by pressing »MENU«
Select »Call timers and charge«
You can select whether you want the Show
timer function to be on or off. If you turn it on,
your telephone will display the actual duration
of an ongoing conversation.
The conditions
for also seeing the cost are identical with the
conditions mentioned above in the Last call
sub menu.
The Call timers and charge menu offers you
the possibility of checking duration and cost of
your calls in different ways:
»Last call«
»Total calls«
»Reset timers and charge«
»Show timer and credit«
»Call charge«
Call charge
If your network supports this feature, this is
where you deal with the call charge. To enter or
change call charge and currency you will be
requested to enter your PUK2/PIN2 code. You
have the following options:
Last call
Informs you about the duration of your last
call.
You may also be able to see the cost of
your last call, but this feature demands that
your network supports it, and that you have
entered a unit price and the actual currency in
the sub menu Call charge (see below).
»Call charge maximum«
»Call charge unit price«
»Call charge currency«
»Call charge remaining«
Call charge maximum
Gives you the option of entering a maximum
call charge limit, so that when this maximum
has been reached no more phone calls can be
made.
Total calls
Informs you about the duration of all calls
made with your SIM card since the timer was
last reset. The conditions for also seeing the
cost of these calls are identical with the
conditions mentioned above in the Last call
sub menu.
Call charge unit price
This is where to enter the unit price (check with
your network operator).
Call charge currency
This is where to enter the currency of your call
charge.
Reset timers and charge
Resets your timers, so that the call duration
counter is set to zero. You may be asked to
enter your PUK2/PIN2 code.
Call charge remaining
The telephone can inform you about the
remaining call charge balance, if you have
entered a maximum call charge limit.
30
Security (Menu 7)
First
SIM lock
Enter the Setup menu by pressing »MENU«
Select »Security«
You can link your telephone and your SIM
card together. This means that if, for instance,
your phone is stolen, it cannot be used together
with another SIM card. To enable this feature
you just turn it on and then enter a 6 to 16-digit
code of your own choice.
Entering the Security menu gives you different
possibilities of preventing misuse of your SIM
card and your telephone, e.g. if your phone is
lost or stolen:
For your own sake remember to write down this
code to be able to deactivate the lock at a later
time. You have 10 attempts before the phone is
blocked.
»PIN code«
»SIM lock«
»Network password«
»Encryption indication«
»Line lock«
Network password
If you subscribe to a call barring service your
network operator will have supplied you with a
4-digit password. If you want to change it,
select this sub menu.
PIN code
In this sub menu you can select a PIN code (4
to 8 digits) to be entered each time you switch
on your phone. If you have already selected a
PIN code you also have the choice of disabling
it again or changing it to another code.
If you enter an invalid PIN code three times,
your SIM card will be blocked, and to unblock
it you have to enter the PUK code supplied by
your network operator. This procedure prevents
unauthorised persons from working out your
PIN code by repeatedly entering different
combinations of numbers.
The display will inform you how many tries
you have left before the SIM card is blocked. If
you enter an invalid PUK code 10 times, your
SIM card will be permanently blocked and you
have to contact your network operator.
Some SIM cards use a PIN2 code for accessing special functions. Contact your network
operator for further information on PUK2 and
PIN2 codes.
Encryption indication
Encryption means that the network encrypts
the conversations to make it difficult for
unauthorised persons to listen in on them. If
you connect to a network which does not
support encryption, you will get a warning in
the display when trying to make a call. You
have the option of turning on and off the network warning by selecting this sub menu.
Line lock
If you have Alternate Line Service on your
SIM card you can restrict the outgoing use to
only one of these lines. Activate the line lock in
this sub menu and enter a 4 to 8 digit lock code
of your own choice. To shift back to the other
line you have to re-enter this code.
31
509 DUAL GB
02/09/99 15:12
Side 32
(Sort plade)
Setup menu
Calculator (Menu 8)
Calculation examples
5 plus 2
Press 5, hold down 1 for one second, press 2
and press =
»7«
First
Enter the Setup menu by pressing »MENU«
Select »Calculator«
When you enter this menu your phone acts as
an ordinary calculator.
8 divided by 4
Press 8, hold down 5 for one second, press 4
and press =
»2«
How to use the calculator
The equal-sign (=) is found on the right hand
function key.
Square root of 8
Press 8 and hold down 6 for one second
»2.8284271«
Hold down the relevant key for one second to
get the desired arithmetic operation.
Key
1
2
3
4
5
6
7
8
9
0
Keypad lock
15 per cent of 60
Press 6, 0, hold down 2 for one second,
press 1, 5, hold down 7 for one second
Operation
Addition (+)
Multiplication (*)
Square function (x2)
Subtraction (-)
Division (/)
Square root (√)
Percentage (%)
Fractions (1/x)
Exponent (E)
M+ or decimal point (press briefly)
MC
MR or -/+ (neg./pos.) (press briefly)
»9«
-5.2 times 10,000
Press 5,
, 2, , hold down 2 for one
second, press 1, hold down 9 for one second,
press 4 and finally =
»-52000«
Keypad lock
Unstructured supplementary
services (USSD)
To avoid making calls accidentally you can lock
the keypad:
1
Press »MENU«
2
Press
On some networks you have the possibility of
sending unstructured supplementary service
strings to your network. This is a feature
completely defined by your network allowing
direct communication between you and the
network. An example of a USSD could be that
entering a certain code of digits and/or letters
terminated by a
tells your network to send
you a scale of charges. A USSD service string
should always be terminated by pressing the
-key and »CALL«.
In order to be able to send USSD service
strings you must enter the Phone setup menu
and select »Speed dialling off«. Pressing the
relevant keys 0 to 9 for one second will lead
you to the alpha mode enabling you to enter
letters and digits instead of only digits.
Contact your network operator for further
information.
If you try to activate one of the keys, the display will tell you that the keypad is locked. The
keypad lock is, however, automatically disabled
– during an incoming call until you have
finished your conversation
– when the telephone is placed in the
handsfree car kit
When you want to unlock the keypad again:
1
Press »UNLOCK«
2
Press
As soon as a figure is stored in the memory this
will be indicated on the display by .
You can access the memory by pressing
or
the -key (MR).
The memory is reset each time you switch off
your phone.
Quick survey
By pressing
you get access to a survey of
what arithmetic operation is placed on what
key.
An arithmetic operation can then be selected
directly from the survey by pressing the assigned key briefly.
Back to standby mode
Press »CLEAR« and hold down »EXIT« for
one second.
32
33
509 DUAL GB
02/09/99 15:12
Side 34
(Sort plade)
Conversation menu
Conversation menu
General
Microphone off
This menu is only available when you are
actually talking on the phone.
While having a call, you may wish to have a
private conversation with someone next to you.
You will hear everything your caller says, but
you cannot be heard by the caller. Select
»Micro. off«, and then »Micro. on« when you
want to activate the microphone again.
Enter the Conversation menu: Press »MENU«
Scroll through the options:
and
Select an option: Press »OK«
This menu offers you different kinds of options
while you are having a conversation:
Hold a call
You can make a second call without having to
end a call that is currently active. Enter the
second phone number and press »CALL«.
If you have activated the call waiting option
in the Setup menu (see page 22) you can also
answer a new incoming call without having to
end the currently active call. When you hear
the special ringing tone in your earphone, you
just press »ANSWER«.
In both cases, the first call will automatically
be put on hold. Please be aware that you can
only have one call on hold at a time. You can
also put calls on hold manually by selecting
»Hold«.
Microphone off
Hold a call
Continue a call
Switch between calls
Drop an active call
Join calls
Private call
Drop a held call
Continue a call
When you want to retrieve the call put on hold,
just select »Continue«.
Transfer a call
Switch between calls
Transfer a call
If you select »Switch«, the active call will be put
on hold and the call on hold will now be active.
In this way you can switch between your
conversations.
If you have an active call and a call on hold
you can connect the two by selecting »Transfer«.
In that way, the two parties can talk together
while you withdraw from the conversation.
Drop an active call
Call a phone book number
An active call can be ended by selecting
»Drop active«. The held call will remain on
hold and you have to retrieve it to continue
conversation.
During a conversation you can make a new call
to a number stored in your phone book by
selecting »Phone book«.
Send an SMS message
Join calls
If, during a conversation, you want to send a
message to a third party select »Send SMS«.
If you have an active call and a call on hold at
the same time, you can select »Join« to enable
all of you to speak together.
Private call
If you have joined all calls and want to have a
private conversation with one of the callers,
select »Private«. The other calls will be put on
hold.
Drop a held call
You can end the call put on hold by selecting
»Drop held«.
Call a phone book number
Send an SMS message
Note: The status of the call determines which
menu items are visible and available for you to
select.
34
35
509 DUAL GB
02/09/99 15:12
Side 36
(Sort plade)
Accessories
Accessories
Dual slot desktop charger
Belt clip
Handsfree car kit
In the dual slot desktop charger you can place
both your phone and a spare battery to be
charged. The desktop charger is powered by
means of the charger supplied with your
phone.
The battery on your phone will be charged as
the first. When you place the phone in the
charger you have to make sure that the battery
symbols on the display of your phone start
flashing. During charging these symbols will
flash on and off one after another. When the
battery is fully charged after approximately 2
hours, all 4 symbols are permanently displayed
if your phone is switched on. If your phone is
switched off, the symbols will disappear when
the charging has been completed.
When a spare battery is placed in the
charger the LED indicator on the front will
show a red light, and then, when the spare
battery is fully charged, a green light . If the
indicator is blinking red, the battery is defect.
The indicator will be off when there is no spare
battery attached.
A High Power 1800 mAh NiMH battery
cannot be charged in the dual slot desktop
charger.
The belt clip can be removed or fitted by
means of a screwdriver. The necessary screws
and labels for mounting the belt clip will be
delivered together with the belt clip.
Remove the rubber plug covering the antenna
hole on the back on the phone.
When your phone is placed in the cradle, it
will switch on automatically with the car
ignition and so will the display and keypad
backlighting. The backlight will remain on
continuously as long as the phone is switched
on.
The battery will be automatically recharged
when necessary.
A
B
Menu options
To set up your options concerning the car kit,
you must press »MENU« and select
»Phone setup«. If you then select »Car kit« you
get two new options:
»Car kit auto answer«
»Car kit power off«
How to fit the belt clip:
Remove the label (A) on the back of the phone.
The belt clip can now be fitted by means of a
screwdriver. Place the label (B) on the belt clip
to cover the screw.
How to remove the belt clip:
Remove the label (B) on the belt clip. The belt
clip can now be removed by means of a screwdriver. Place the label (A) on the back of the
phone to cover the screw hole.
36
Handsfree calling
Making and receiving handsfree calls work in
exactly the same way as ordinary phoning. The
only difference is that the conversation takes
place via the external speaker and microphone.
If you have activated any key answer in the
Setup menu (page 26) you can answer the call
by pressing any key (except for the left function
key and the arrow keys).
Car kit auto answer
When activating this function, your phone will
automatically answer a call after 5 seconds.
This option is only effective when the car
ignition is on.
Car kit power off
You can select whether you want the telephone
to switch off automatically with the car ignition
after a delay of 1 hour or whether you want to
switch it off manually.
If you have selected the automatic mode and
want to switch your telephone off while the
ignition is on, you can still do so manually.
Other accessories
Light 600 mAh NiMH battery
Vibra-alarm 600 mAh NiMH battery
High Power 1800 mAh NiMH battery
Cigar lighter charger 12/24V
Travel chargers
Simple car holder
Handsfree headset
37
509 DUAL GB
02/09/99 15:12
Side 38
(Sort plade)
Keypad functions
Function keys with
text line in display
Display symbols
Battery level indicator
Call indicators
4 bars:
Battery is fully charged.
1 - 3 bars: Battery is partly discharged.
0 bars:
Battery needs recharging.
You have limited conversation
time left. At the same time the
phone will emit a short warning
tone.
The left function key turns your phone on and
off. When the phone is on, the function of these
keys varies according to whether you are in
standby, menu, or conversation mode. The text
line at the bottom of the display will inform
you of the actual function of each key at any
time.
.2
SMS message indicators
There is a new message for you.
On: There are still unread messages.
Flashing: The SMS memory is full.
Signal strength indicator
Arrow keys up/down
The stronger the signal (more signal bars
displayed), the better the radio connection.
For controlling volume level during conversation, and scrolling through menus, phone book,
lists, messages, etc.
Voice mail indicator
Indicates that there is a voice mail for you.
Call divert indicator
Scroll indicators
Voice mail key
On: All calls to your mobile telephone are
diverted to another telephone number.
Flashing: Check the status of your call diverts.
Show you that there are more functions
up or down which you can access.
Press for one second and get quick access to
your voice mail.
There is a new call for you.
You have missed two calls.
Volume level indicator
Key
Indicates volume level when adjusting.
Press for one second to insert the "+" before
international phone numbers.
Tones indicator
On: Ring volume off.
Flashing: All tones off.
Key
Press for one second to insert a pause between
the main number and the extension number.
See page 23 for more information.
Display and keypad backlighting
Last outgoing call
The backlight switches on automatically when
you press a key. In standby mode the light will
automatically switch off if no key is pressed for
10 seconds or more.
Press for one second and the call is initiated
automatically (only if you have activated speed
dialling).
38
39
509 DUAL GB
02/09/99 15:12
Side 40
(Sort plade)
Index
Index
Accessories
Answered calls
Answering a call
Any key answer
Auto redial
36
11
5
26
24
Barred numbers
13
4
39
36
28
28
28
Battery
Battery level indicator
Belt clip
Broadcast channels
Broadcast language
Broadcast setup
Edit an old message
Edit a name/number
Emergency calls
Encryption indication
Extension numbers
Extra phone books
14
12
5
31
9
13
Factory settings
- telephone
- tones
Find a name/number
Fixed numbers
26
23
9
13
Getting to know your phone 6
Calculator
Call barring
Call divert
Call setup
Call timers/charge
Call waiting
Car kit installation
Care of your phone
Calling Line ID
Closed user group
Continuing calls
Conversation menu
Currency/Call charge
Delete all SMS
Delete a name/number
Delete call information
Display
Dual slot charger
Duration of last call
Duration of total calls
Dynamic menus
32
21
19
19
29
22
37
7
9
22
34
34
30
28
12
29
39
36
30
30
7
Greeting
25
Handsfree car kit
37
Information numbers
International calls
13
8
Joining calls
35
Keypad
Keypad lock
Keypad tone
38
33
23
Language
24
22
10
8
Line selection
List menu
Location numbers
Main functions
Making your first call
Maximum call charge
Menu numbers
40
6
5
30
18
Missed calls
Muting the microphone
11
34
Network password
Network selection
31
24
Options in conversation
Outgoing calls
Outgoing call identity
Own numbers
34
11
22
13
Phone book
Phone book setup
Phone book sorting
Phone book status
Phone setup
PIN code
PIN2 code
Power saving
Precautions
Preferred list
Prefix telephone numbers
Preparing your phone
Private calls
PUK code
PUK2 code
Putting a call on hold
8
29
29
12
24
31
31
25
2
25
9
4
35
31
31
34
Reading an SMS
- broadcast
- point-to-point
Remaining call charge
Reset timers
Ringing tones
16
14
30
30
23
Security
Selection of language
Selection of network
Sending a new SMS
Service centre (SMS)
Service numbers
Setup menu
SIM card
SIM card limitations
SIM lock
SMS
- broadcast
- point-to-point
SMS message tones
SMS setup
- broadcast
- point-to-point
Speed dialling
Store a name/number
Switching calls
Tones setup
31
24
24
15
27
13
17
4
7
31
16
14
23
28
27
26
8
34
Transferring calls
Trembler
23
35
23
Unit price
USSD
30
33
Voice mail
Volume control
16
5
Welcome greeting
Who is calling
25
9
41