Biostar A880G User`s manual

A880G+/A785G3+ Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Table of Contents
Chapter 1: Introduction ............................................................ 1
1.1
Before You Start ................................................................................ 1
1.2
Package Checklist ............................................................................. 1
1.3
Motherboard Features...................................................................... 2
1.4
Rear Panel Connectors ..................................................................... 3
1.5
Motherboard Layout......................................................................... 4
Chapter 2: Hardware Installation ............................................. 5
2.1
Installing Central Processing Unit (CPU)....................................... 5
2.2
FAN Headers...................................................................................... 7
2.3
Installing System Memory ................................................................ 8
2.4
Connectors and Slots ....................................................................... 10
Chapter 3: Headers & Jumpers Setup .................................. 13
3.1
How to Setup Jumpers .................................................................... 13
3.2
Detail Settings.................................................................................. 13
Chapter 4: RAID Functions ..................................................... 18
4.1
Operating System............................................................................ 18
4.2
Raid Arrays ...................................................................................... 18
4.3
How RAID Works............................................................................. 18
Chapter 5: Useful Help ............................................................ 21
5.1
Driver Installation Note.................................................................. 21
5.2
Software............................................................................................ 22
5.3
Extra Information............................................................................ 26
5.4
AMI BIOS Beep Code....................................................................... 28
5.5
Troubleshooting............................................................................... 29
Appendix: SPEC In Other Languages ...................................... 30
German.................................................................................................................. 30
French .................................................................................................................... 32
Italian..................................................................................................................... 34
Spanish ................................................................................................................... 36
Portuguese ............................................................................................................ 38
Polish...................................................................................................................... 40
Russian ................................................................................................................... 42
Arabic..................................................................................................................... 44
Japanese ................................................................................................................ 46
A880G+/A785G3+
CHAPTER 1: INTRODUCTION
1.1
BEFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
„
„
„
„
„
„
„
1.2
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
The operating temperatures of the computer should be
0 to 45 degrees Celsius.
PACKAGE CHECKLIST
HDD Cable X 1 (optional)
Serial ATA Cable X 2
Rear I/O Panel for ATX Case X 1
Installation Guide X 1
Fully Setup Driver CD X 1 (full version manual files inside)
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
Serial ATA Power Cable X 1 (optional)
Note: The package contents may be different due to area or your motherboard version.
1
Motherboard Manual
1.3
MOTHERBOARD FEATURES
A880G+
CPU
A785G3+
Socket AM3
Socket AM3
AMD Phenom II/ Athlon II processors
AMD Phenom II/ Athlon II processors
AMD 64 Architecture enables 32 and 64 bit
AMD 64 Architecture enables 32 and 64 bit
computing
computing
Supports Hyper Transport 3.0 and Cool=n=Quiet Supports Hyper Transport 3.0 and Cool=n=Quiet
FSB
Chipset
(Maximum Watt: 125W)
(Maximum Watt: 125W)
Support HyperTransport 3.0
Support HyperTransport 3.0
Supports up to 5.2 GT/s Bandwidth
Supports up to 5.2 GT/s Bandwidth
AMD 880G
AMD 785G
AMD SB710
AMD SB710
ITE 8721
ITE 8721
Provides the most commonly used legacy Super Provides the most commonly used legacy Super
I/O functionality
I/O functionality
Low Pin Count Interface
Low Pin Count Interface
Environment Control initiatives
Environment Control initiatives
H/W Monitor
H/W Monitor
ITE's "Smart Guardian" function
ITE's "Smart Guardian" function
DDR3 DIMM Slots x 2
DDR3 DIMM Slots x 2
Max Memory Capacity 8GB
Max Memory Capacity 8GB
Each DIMM supports 512MB/1GB/2GB/4GB
Each DIMM supports 512MB/1GB/2GB/4GB
Main
DDR3
DDR3
Memory
Dual Channel Mode DDR3 memory module
Dual Channel Mode DDR3 memory module
Supports DDR3 800 / 1066 / 1333
Supports DDR3 800 / 1066 / 1333
Registered DIMM and ECC DIMM is not
Registered DIMM and ECC DIMM is not
supported
supported
Integrated in AMD 880G Chipset
Integrated in AMD 785G Chipset
Max Shared Video Memory is 512MB
Max Shared Video Memory is 512MB
Super I/O
Graphics
IDE
SATA II
LAN
Sound
DVI/HDMI/HDCP/UVD2 support
DVI/HDMI/HDCP/UVD2 support
Integrated IDE Controller
Integrated IDE Controller
Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4,
supports PIO Mode 0~4,
Integrated Serial ATA Controller
Integrated Serial ATA Controller
Data transfer rates up to 3 Gb/s
Data transfer rates up to 3 Gb/s
SATA Version 2.0 specification compliant
SATA Version 2.0 specification compliant
Realtek RTL 8111DL
Realtek RTL 8111DL
10 / 100 / 1000 Mb/s auto negotiation
10 / 100 / 1000 Mb/s auto negotiation
Half / Full duplex capability
Half / Full duplex capability
ALC662
ALC662
5.1 channels audio out
5.1 channels audio out
High Definition Audio
Slots
2
High Definition Audio
PCI Express Gen2 x16 slot
x1
PCI Express Gen2 x16 slot
x1
PCI slot
x2
PCI slot
x2
A880G+/A785G3+
A880G+
On Board
Connector
Back Panel
I/O
Board Size
Special
Features
A785G3+
Floppy Connector
x1
Floppy Connector
IDE Connector
x1
IDE Connector
x1
SATA Connector
x4
SATA Connector
x4
Front Panel Connector
x1
Front Panel Connector
x1
Front Audio Connector
x1
Front Audio Connector
x1
S/PDIF Out Connector
x1
S/PDIF Out Connector
x1
CPU Fan Header
x1
CPU Fan Header
x1
System Fan Header
x1
System Fan Header
x1
CMOS clear Header
x1
CMOS clear Header
x1
USB Connector
x2
USB Connector
x2
Power Connector (24pin)
x1
Power Connector (24pin)
x1
Power Connector (4pin)
x1
Power Connector (4pin)
x1
Consumer IR Connector
x1
Consumer IR Connector
x1
Printer Port Connector
x1
Printer Port Connector
x1
Serial port Connector
x1
Serial port Connector
x1
PS/2 Keyboard / Mouse
x1
PS/2 Keyboard / Mouse
x1
HDMI Port
x1
HDMI Port
x1
VGA Port
x1
VGA Port
x1
DVI-D Port
x1
DVI-D Port
x1
LAN Port
x1
LAN Port
x1
USB Port
x4
USB Port
x4
Audio Jack
x3
Audio Jack
x3
200 mm(W) x 244 mm(L)
200 mm(W) x 244 mm(L)
RAID 0 / 1 / 1+0 support
RAID 0 / 1 / 1+0 support
Windows XP / Vista / 7
Windows XP / Vista / 7
OS Support Biostar reserves the right to add or remove
support for any OS With or without notice.
1.4
x1
Biostar reserves the right to add or remove
support for any OS With or without notice.
REAR PANEL CONNECTORS
PS/2
Keyboard / Mouse
LAN
Line In/
Surround
Line Out
Mic In 1/
Bass/ Center
USBX2
NOTE:
HDMI
DVI-D
VGA
USBX2
The HDMI and DVI-D ports both can provide digital video signals out-put function, but
these two interfaces cannot work at the same time. The chipset uses the same channel
to control HDMI and DVI-D, so these ports cannot transmit video signal to different display
panels simultaneously.
3
Motherboard Manual
1.5
MOTHERBOARD LAYOUT
USBKB1
CPU_FAN1
ATXPWR2
HDMI1
D DR 3 _ A 1
Socke t AM 3
DVI1
D DR 3_ B1
ATXPWR1
IDE1
VGA1
JUSBV1
BAT1
RJ45USB1
AMD
880G/
785G
AUDIO1
JSPDIFOUT1
SATA4
LAN
SATA3
PEX16_1
BIOS
Super I/O
JCMOS1
AMD
SB710
PCI1
PCI2
Codec
SATA2
F_USB2
J_PRINT1
FDD1
F_AUDIO1 CIR1
J_COM1
Note: ■ represents the 1st pin.
4
JUSBV2
SATA1
F_USB1
SYS_FAN1
PANEL1
A880G+/A785G3+
CHAPTER 2: HARDWARE INSTALLATION
2.1
INSTALLING CENTRAL PROCESSING UNIT (CPU)
Step 1: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.
Step 2: Look for the white triangle on socket, and the gold triangle on
CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.
5
Motherboard Manual
Step 3: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.
Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the CPU_FAN1. This completes the
installation.
6
A880G+/A785G3+
2.2
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
CPU_FAN1: CPU Fan Header
1
4
Pin
1
2
3
4
Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control (By Fan)
SYS_FAN1: System Fan Header
Pin
1
2
3
1
Assignment
Ground
+12V
FAN RPM rate
sense
3
Note:
CPU_FAN1 supports 4-pin head connector. SYS_FAN1 supports 3-pin head connector.
When connecting with wires onto connectors, please note that the red wire is the positive
and should be connected to pin#2, and the black wire is Ground and should be
connected to GND.
7
Motherboard Manual
2.3
INSTALLING SYSTEM MEMORY
DD R3_A1
DD R3_ B 1
A. Memory Modules
8
1.
Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2.
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
A880G+/A785G3+
B. Memory Capacity
DIMM Socket
Location
DDR3 Module
DDR3_A1
512MB/1GB/2GB/4GB
DDR3_B1
512MB/1GB/2GB/4GB
Total Memory
Size
Max is 8GB.
C. Dual Channel Memory installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table
Dual Channel Status DDR3_A1 DDR3_B1
Disabled
X
O
Disabled
O
X
Enabled
O
O
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)
9
Motherboard Manual
2.4
CONNECTORS AND SLOTS
FDD1: Floppy Disk Connector
The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types.
2
34
1
33
IDE1: Hard Disk Connector
The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.
40
39
2
1
SATA1~SATA4: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 4 channels SATA interface,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
SATA4
SATA3
SATA2
SATA1
7
10
4
1
Pin
1
2
3
4
5
6
7
Assignment
Ground
TX+
TXGround
RXRX+
Ground
A880G+/A785G3+
ATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.
12
24
1
13
Pin
Assignment
Pin
Assignment
13
14
15
16
17
18
19
20
21
22
23
24
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground
1
2
3
4
5
6
7
8
9
10
11
12
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V
ATXPWR2: ATX Power Source Connector
Connecting this connector will provide +12V to CPU power circuit.
2
1
3
4
Pin
1
2
3
4
Assignment
+12V
+12V
Ground
Ground
Note:
Before you power on the system, please make sure that both ATXPWR1 and ATXPWR2
connectors have been plugged-in.
11
Motherboard Manual
PEX16_1: PCI-Express Gen2 x16 Slot
-
PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
PEX16_1
PCI1~PCI2: Peripheral Component Interconnect Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.
PCI1
PCI2
12
A880G+/A785G3+
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1
HOW TO SETUP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin opened
3.2
Pin closed
Pin1-2 closed
DETAIL SETTINGS
PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
PWR_LED
On/Off
+ + -
9
1
16
8
+ RST
SPK
HLED
Pin
1
2
3
4
5
6
7
8
Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control
Function
Speaker
Connector
Hard drive
LED
Reset button
Pin
9
10
11
12
13
14
15
16
Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground
Function
N/A
N/A
Power LED
Power-on button
13
Motherboard Manual
F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.
F_ US B 2
F _ US B 1
9
1
10
2
Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
NC
Key
Pin
1
2
3
4
5
6
7
8
9
10
JUSBV1/JUSBV2: Power Source Headers for USB Ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at USBKB1/RJ45USB1.
JUSBV2: +5V for USB ports at F_USB1/F_USB2.
Pin 2-3 Close:
JUSBV1: +5V STB for USB ports at USBKB1/RJ45USB1.
JUSBV2: +5V STB for USB ports at F_USB1/F_USB2.
3
1
Pin 1-2 close
JUSBV1
3
1
JUSBV2
14
3
1
Pin 2-3 close
A880G+/A785G3+
JSPDIFOUT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.
Pin
1
2
3
3
Assignment
+5V
SPDIF_OUT
Ground
1
F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector; AC’97 connector
is not acceptable.
2
10
1
9
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense
15
Motherboard Manual
JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.
1
3
Pin 1-2 Close:
Normal Operation
(default).
1
1
3
3
Pin 2-3 Close:
Clear CMOS data.
※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.
Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset your desired password or clear the CMOS data.
J_COM1: Serial Port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.
16
2
10
1
9
Pin
Assignment
1
2
3
4
5
6
7
8
9
10
Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
NC
A880G+/A785G3+
J_PRINT1: Printer Port Connector
This header allows you to connector printer on the PC.
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
Assignment
-Strobe
-ALF
Data 0
-Error
Data 1
-Init
Data 2
-Scltin
Data 3
Ground
Data 4
Ground
Data 5
2
26
1
25
Pin
14
15
16
17
18
19
20
21
22
23
24
25
26
Assignment
Ground
Data 6
Ground
Data 7
Ground
-ACK
Ground
Busy
Ground
PE
Ground
SCLT
Key
CIR1: Consumer IR Connector
This header is for infrared remote control and communication.
Pin
1
2
3
4
5
6
Assignment
IrDA serial input
Ground
Ground
Key
IrDA serial output
IR Power
2 6
1 5
17
Motherboard Manual
CHAPTER 4: RAID FUNCTIONS
4.1
OPERATING SYSTEM
Supports Windows XP, Windows Vista, and Windows 7.
4.2
RAID ARRAYS
RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for
many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 1+0: RAID 1+0 combines the techniques used in RAID 0 and RAID 1.
4.3
HOW RAID WORKS
RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment.
This technique reduces overall disk access time and offers high bandwidth.
Features and Benefits
-
Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the
platform.
Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
Benefits: provides increased data throughput, especially for large files.
No capacity loss penalty for parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
fails, all data is lost.
Fault Tolerance: No.
Block 1
Block 3
Block 5
18
Block 2
Block 4
Block 6
A880G+/A785G3+
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on
a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if
the active volume or drive is corrupted or becomes unavailable because of a hardware
failure.
RAID techniques can be applied for high-availability solutions, or as a form of
automatic backup that eliminates tedious manual backups to more expensive and less
reliable media.
Features and Benefits
-
Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal for small databases or any other application that
requires fault tolerance and minimal capacity.
Benefits: Provides 100% data redundancy. Should one drive fail, the
controller switches to the other drive.
Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
Fault Tolerance: Yes.
Block 1
Block 2
Block 3
Block 1
Block 2
Block 3
19
Motherboard Manual
RAID 1+0:
RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 1+0
solution for improved resiliency, performance and rebuild performance.
Features and Benefits
-
-
Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
Benefits: Optimizes for both fault tolerance and performance, allowing for
automatic redundancy. May be simultaneously used with other RAID
levels in an array, and allows for spare disks.
Drawbacks: Requires twice the available disk space for data redundancy,
the same as RAID level 1.
Fault Tolerance: Yes.
Block 1
Block 3
Block 5
20
Block 1
Block 3
Block 5
Block 2
Block 4
Block 6
Block 2
Block 4
Block 6
A880G+/A785G3+
CHAPTER 5: USEFUL HELP
5.1
DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
21
Motherboard Manual
5.2
SOFTWARE
Installing Software
1. Insert the Setup CD to the optical drive. The drivers installation program
would appear if the Autorun function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.
Launching Software
After the installation process, you will see the software icon “eHOT Line” /
“BIOS Update” appears on the desktop. Double-click the icon to launch the
utility.
eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represents important
*informa
ti on that you
must provide. Wi thout
this information, you may
not be able to send out
the mail.
This bl ock will show
the i nformation which
would be collected in
the mail .
conditi on
*Describe
of your system.
your area or
*Select
the area cl ose to you.
Provide the e-ma il
address that you would
like to send the copy to.
e the name of
*Provid
the memory module
manufacturer.
Provide the name of
the power suppl y
manufacturer and the
model no.
Send the mail out.
Exi t thi s dialog.
Save these in forma tion to a .txt file
22
A880G+/A785G3+
After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.
If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.
Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.
Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.
If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web
http://www.biostar.com.tw/app/en-us/about/contact.php for getting
our contact information.
23
Motherboard Manual
BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.
AWARD BIOS
Show current BIOS information
Clear CMOS function
(Only for AWARD BIOS)
Save current BIOS
to a .bin file
Update BIOS
with a BIOS file
<Backup BIOS>
Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.
24
AMI BIOS
A880G+/A785G3+
<Update BIOS>
Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.
After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.
The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.
After the BIOS Update process, click on
OK to restart the system.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
<Delete>
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.
All the information and content above about the software are subject to be changed
without notice. For better performance, the software is being continuously updated.
The information and pictures described above are for your reference only. The actual
information and settings on board may be slightly different from this manual.
25
Motherboard Manual
5.3
EXTRA INFORMATION
CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
26
A880G+/A785G3+
BIO-Flasher
BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to
update your BIOS via USB pen drive or floppy disk.
The BIO-Flasher is built in the BIOS chip. To enter the utility, press <F12>
during the Power-On Self Tests (POST) procedure while booting up.
Updating BIOS with BIO-Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, save the BIOS file into a USB pen drive or a floppy disk.
3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the
USB port or the floppy disk drive.
4. Power on or reset the computer and then
press <F12> during the POST process.
A select dialog as the picture on the right
appears.
Select the device contains the BIOS file and
press <Enter> to enter the utility.
5. The utility will show the BIOS
files and their respective
information. Select the proper
BIOS file and press <Enter>
then <Y> to perform the BIOS
update process.
6. After the update process, the utility will ask you to reboot the system.
Press <Y> to proceed. BIOS update completes.
z
z
This utility only allows storage device with FAT32/16 format and single
partition.
Shutting down or resetting the system while updating the BIOS will lead to
system boot failure.
27
Motherboard Manual
5.4
AMI BIOS BEEP CODE
Boot Block Beep Codes
Number of Beeps
1
2
3
4
5
7
10
11
12
13
Description
No media present. (Insert diskette in floppy drive A:)
“AMIBOOT.ROM” file not found in root directory of diskette in
A:
Insert next diskette if multiple diskettes are used for recovery
Flash Programming successful
File read error
No Flash EPROM detected
Flash Erase error
Flash Program error
“AMIBOOT.ROM” file size error
BIOS ROM image mismatch (file layout does not match
image present in flash device)
POST BIOS Beep Codes
Number of Beeps
1
3
6
7
8
Description
Memory refresh timer error
Base memory read/write test error
Keyboard controller BAT command failed
General exception error (processor exception interrupt error)
Display memory error (system video adapter)
Troubleshooting POST BIOS Beep Codes
Number of Beeps
1, 3
6, 7
8
28
Troubleshooting Action
Reseat the memory, or replace with known good modules.
Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.
z If beep codes are generated when all other expansion
cards are absent, consult your system manufacturer’s
technical support.
z If beep codes are not generated when all other expansion
cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.
If the system video adapter is an add-in card, replace or
reseat the
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.
A880G+/A785G3+
5.5
TROUBLESHOOTING
Probable
1.
There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work
2.
Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.
System does not boot from a hard disk
drive, but can be booted from optical
drive.
Solution
1.
2.
3.
Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.
Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.
1.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots from an optical
1.
Back up data and applications
drive. Hard disks can be read,
files.
applications can be used, but system 2.
Reformat the hard drive.
fails to boot from a hard disk.
Re-install applications and data
using backup disks.
Screen message shows “Invalid
Review system’s equipment. Make sure
Configuration” or “CMOS Failure.”
correct information is in setup.
System cannot boot after user installs a 1.
Set master/slave jumpers
second hard drive.
correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.
29
Motherboard Manual
APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
A880G+
CPU
A785G3+
Sockel AM3
Sockel AM3
AMD Phenom II/ Athlon II Prozessoren
AMD Phenom II/ Athlon II Prozessoren
Die AMD 64-Architektur unterstützt eine 32-Bit- Die AMD 64-Architektur unterstützt eine 32-Bitund 64-Bit-Datenverarbeitung
und 64-Bit-Datenverarbeitung
Unterstützt Hyper Transport 3.0 und Cool’n’Quiet Unterstützt Hyper Transport 3.0 und Cool’n’Quiet
FSB
Chipsatz
Super E/A
(Maximales Watt: 125W)
(Maximales Watt: 125W)
Unterstützt HyperTransport 3.0 mit einer
Unterstützt HyperTransport 3.0 mit einer
Bandbreite von bis zu 5.2 GT/s
Bandbreite von bis zu 5.2 GT/s
AMD 880G
AMD 785G
AMD SB710
AMD SB710
ITE8721
ITE8721
Bietet die häufig verwendeten alten Super
Bietet die häufig verwendeten alten Super
E/A-Funktionen.
E/A-Funktionen.
Low Pin Count-Schnittstelle
Low Pin Count-Schnittstelle
Umgebungskontrolle,
Umgebungskontrolle,
Hardware-Überwachung
Hardware-Überwachung
"Smart Guardian"-Funktion von ITE
"Smart Guardian"-Funktion von ITE
DDR3 DIMM-Steckplätze x 2
DDR3 DIMM-Steckplätze x 2
Max. 8GB Arbeitsspeicher
Max. 8GB Arbeitsspeicher
Jeder DIMM unterstützt 512MB/ 1GB/2GB/4GB Jeder DIMM unterstützt 512MB/ 1GB/2GB/4GB
Arbeitsspeich DDR3.
er
Grafik
IDE
SATA
LAN
30
DDR3.
Dual-Kanal DDR3 Speichermodul
Dual-Kanal DDR3 Speichermodul
Unterstützt DDR3 800 / 1066 / 1333
Unterstützt DDR3 800 / 1066 / 1333
registrierte DIMMs. ECC DIMMs werden nicht
registrierte DIMMs. ECC DIMMs werden nicht
unterstützt.
unterstützt.
Integrierter AMD 880G-Chipsatz
Integrierter AMD 785G-Chipsatz
Max. 512MB gemeinsam benutzter
Max. 512MB gemeinsam benutzter
Videospeicher
Videospeicher
Unterstützt DVI/HDMI/HDCP/UVD2
Unterstützt DVI/HDMI/HDCP/UVD2
Integrierter IDE-Controller
Integrierter IDE-Controller
Ultra DMA 33 / 66 / 100 / 133 Bus
Ultra DMA 33 / 66 / 100 / 133 Bus
Master-Modus
Master-Modus
Unterstützt PIO-Modus 0~4,
Unterstützt PIO-Modus 0~4,
Integrierter Serial ATA-Controller
Integrierter Serial ATA-Controller
Datentransferrate bis zu 3 Gb/s
Datentransferrate bis zu 3 Gb/s
Konform mit der SATA-Spezifikation Version
Konform mit der SATA-Spezifikation Version
2.0.
2.0.
Realtek RTL 8111DL
Realtek RTL 8111DL
10 / 100 / 1000 Mb/s Auto-Negotiation
10 / 100 / 1000 Mb/s Auto-Negotiation
Halb-/ Vollduplex-Funktion
Halb-/ Vollduplex-Funktion
A880G+/A785G3+
A880G+
HD
A785G3+
ALC662
ALC662
Audio-Unters 5.1-Kanal-Audioausgabe
tützung
Steckplätze
Onboard-Ans
chluss
Rückseiten-E
/A
Platinengröß
e
Sonderfunkti
onen
OS-Unterstü
tzung
5.1-Kanal-Audioausgabe
Unterstützt High-Definition Audio
Unterstützt High-Definition Audio
PCI Express Gen2 x16 Steckplatz
x1
PCI Express Gen2 x16 Steckplatz
x1
PCI-Steckplatz
x2
PCI-Steckplatz
x2
Diskettenlaufwerkanschluss
x1
Diskettenlaufwerkanschluss
x1
IDE-Anschluss
x1
IDE-Anschluss
x1
SATA-Anschluss
x4
SATA-Anschluss
x4
Fronttafelanschluss
x1
Fronttafelanschluss
x1
Front-Audioanschluss
x1
Front-Audioanschluss
x1
S/PDIF- Ausgangsanschluss
x1
S/PDIF- Ausgangsanschluss
x1
CPU-Lüfter-Sockel
x1
CPU-Lüfter-Sockel
x1
System-Lüfter-Sockel
x1
System-Lüfter-Sockel
x1
"CMOS löschen"-Sockel
x1
"CMOS löschen"-Sockel
x1
USB-Anschluss
x2
USB-Anschluss
x2
Stromanschluss (24-polig)
x1
Stromanschluss (24-polig)
x1
Stromanschluss (4-polig)
x1
Stromanschluss (4-polig)
x1
Verbraucher-IR Anschluss
x1
Verbraucher-IR Anschluss
x1
Druckeranschluss Anschluss
x1
Druckeranschluss Anschluss
x1
Serieller Anschluss
x1
Serieller Anschluss
x1
PS/2-Tastatur / Maus
x1
PS/2-Tastatur / Maus
x1
HDMI-Anschluss
x1
HDMI-Anschluss
x1
VGA-Anschluss
x1
VGA-Anschluss
x1
DVI-D-Anschluss
x1
DVI-D-Anschluss
x1
LAN-Anschluss
x1
LAN-Anschluss
x1
USB-Anschluss
x4
USB-Anschluss
x4
Audioanschluss
x3
Audioanschluss
x3
200 mm (B) X 244 mm (L)
200 mm (B) X 244 mm (L)
Unterstützt RAID 0 / 1 / 1+0
Unterstützt RAID 0 / 1 / 1+0
Windows XP / Vista / 7
Windows XP / Vista / 7
Biostar behält sich das Recht vor, ohne
Biostar behält sich das Recht vor, ohne
Ankündigung die Unterstützung für ein
Ankündigung die Unterstützung für ein
Betriebssystem hinzuzufügen oder zu
Betriebssystem hinzuzufügen oder zu
entfernen.
entfernen.
31
Motherboard Manual
FRENCH
A880G+
A785G3+
Socket AM3
Socket AM3
Processeurs AMD Phenom II/ Athlon II
Processeurs AMD Phenom II/ Athlon II
L'architecture AMD 64 permet le calcul 32 et 64 L'architecture AMD 64 permet le calcul 32 et 64
UC
Bus frontal
Chipset
Super E/S
Mémoire
principale
bits
bits
Prend en charge Hyper Transport 3.0 et
Prend en charge Hyper Transport 3.0 et
Cool’n’Quiet
Cool’n’Quiet
(Watt maximum : 125W)
(Watt maximum : 125W)
Prend en charge Hyper Transport 3.0 jusqu'à
Prend en charge Hyper Transport 3.0 jusqu'à
une bande passante de 5.2 GT/s
une bande passante de 5.2 GT/s
AMD 880G
AMD 785G
AMD SB710
AMD SB710
ITE 8721
ITE 8721
Fournit la fonctionnalité de Super E/S
Fournit la fonctionnalité de Super E/S
patrimoniales la plus utilisée.
patrimoniales la plus utilisée.
Interface à faible compte de broches
Interface à faible compte de broches
Initiatives de contrôle environnementales,
Initiatives de contrôle environnementales,
Moniteur de matériel
Moniteur de matériel
Fonction "Gardien intelligent" de l'ITE
Fonction "Gardien intelligent" de l'ITE
Fentes DDR3 DIMM x 2
Fentes DDR3 DIMM x 2
Capacité mémoire maximale de 8 Go
Capacité mémoire maximale de 8 Go
Chaque DIMM prend en charge des DDR3 de
Chaque DIMM prend en charge des DDR3 de
256 Mo/512 Mo et 1Go/2Go/4Go
256 Mo/512 Mo et 1Go/2Go/4Go
Module de mémoire DDR3 à mode à double voie Module de mémoire DDR3 à mode à double voie
Prend en charge la DDR3 800 / 1066 / 1333
Prend en charge la DDR3 800 / 1066 / 1333
Les DIMM à registres et DIMM avec code
Les DIMM à registres et DIMM avec code
correcteurs d'erreurs ne sont pas prises en
correcteurs d'erreurs ne sont pas prises en
charge
charge
Integré dans la chipset AMD 880G
Integré dans la chipset AMD 785G
Graphiques Mémoire vidéo partagée maximale de 512 Mo
IDE
SATA
LAN
Prise en charge DVI/HDMI/HDCP/UVD2
Contrôleur IDE intégré
Contrôleur IDE intégré
Mode principale de Bus Ultra DMA 33 / 66 / 100 Mode principale de Bus Ultra DMA 33 / 66 / 100
/ 133
/ 133
Prend en charge le mode PIO 0~4,
Prend en charge le mode PIO 0~4,
Contrôleur Serial ATA intégré
Contrôleur Serial ATA intégré
Taux de transfert jusqu'à 3 Go/s.
Taux de transfert jusqu'à 3 Go/s.
Conforme à la spécification SATA Version 2.0
Conforme à la spécification SATA Version 2.0
Realtek RTL 8111DL
Realtek RTL 8111DL
10 / 100 / 1000 Mb/s négociation automatique 10 / 100 / 1000 Mb/s négociation automatique
Half / Full duplex capability
32
Mémoire vidéo partagée maximale de 512 Mo
Prise en charge DVI/HDMI/HDCP/UVD2
Half / Full duplex capability
A880G+/A785G3+
A880G+
A785G3+
Prise en
ALC662
ALC662
charge
Sortie audio à 5.1 voies
Sortie audio à 5.1 voies
audio HD
Prise en charge de l'audio haute définition
Fentes
Prise en charge de l'audio haute définition
Fente PCI Express Gen2 x16
x1
Fente PCI Express Gen2 x16
x1
Fente PCI
x2
Fente PCI
x2
Connecteur de disquette
x1
Connecteur de disquette
x1
Connecteur IDE
x1
Connecteur IDE
x1
Connecteur SATA
x4
Connecteur SATA
x4
Connecteur du panneau avant
x1
Connecteur du panneau avant
x1
Connecteur Audio du panneau avant x1
Connecteur Audio du panneau avant x1
Connecteur de sortie S/PDIF
x1
Connecteur de sortie S/PDIF
x1
Embase de ventilateur UC
x1
Embase de ventilateur UC
x1
x1
x1
Embase de ventilateur système
Connecteur Embase d'effacement CMOS
Embase de ventilateur système
x1
Embase d'effacement CMOS
x1
embarqué
Connecteur USB
x2
Connecteur USB
x2
Connecteur d'alimentation
x1
Connecteur d'alimentation
x1
(24 broches)
Connecteur d'alimentation
(24 broches)
x1
(4 broches)
Connecteur d'alimentation
x1
(4 broches)
Connecteur de IR du consommateur
Connecteur de IR du consommateur
x1
x1
Connecteur de Port d'imprimante
x1
Connecteur de Port d'imprimante
x1
Connecteur de Port série
x1
Connecteur de Port série
x1
Clavier / Souris PS/2
x1
Clavier / Souris PS/2
x1
Port HDMI
x1
Port HDMI
x1
E/S du
Port VGA
x1
Port VGA
x1
panneau
Port DVI-D
x1
Port DVI-D
x1
arrière
Port LAN
x1
Port LAN
x1
Port USB
x4
Port USB
x4
Fiche audio
x3
Fiche audio
x3
Dimension
s de la
200 mm (l) X 244 mm (H)
200 mm (l) X 244 mm (H)
carte
Fonctionnal
ités
Prise en charge RAID 0 / 1 / 1+0
Prise en charge RAID 0 / 1 / 1+0
Windows XP / Vista / 7
Windows XP / Vista / 7
Biostar se réserve le droit d'ajouter ou de
Biostar se réserve le droit d'ajouter ou de
supprimer le support de SE avec ou sans
supprimer le support de SE avec ou sans
préavis.
préavis.
spéciales
Support SE
33
Motherboard Manual
ITALIAN
A880G+
CPU
FSB
Chipset
A785G3+
Socket AM3
Socket AM3
Processori AMD Phenom II/ Athlon II
Processori AMD Phenom II/ Athlon II
L’architettura AMD 64 abilita la
L’architettura AMD 64 abilita la
computazione 32 e 64 bit
computazione 32 e 64 bit
Supporto di Hyper Transport 3.0 e
Supporto di Hyper Transport 3.0 e
Cool’n’Quiet
Cool’n’Quiet
(Watt massimo: 125W)
(Watt massimo: 125W)
Supporto di HyperTransport 3.0 fino a 5.2
Supporto di HyperTransport 3.0 fino a 5.2
GT/s di larghezza di banda
GT/s di larghezza di banda
AMD 880G
AMD 785G
AMD SB710
AMD SB710
ITE 8721
ITE 8721
Fornisce le funzionalità legacy Super I/O
Fornisce le funzionalità legacy Super I/O
usate più comunemente.
usate più comunemente.
Super I/O Interfaccia LPC (Low Pin Count)
Funzioni di controllo dell’ambiente:
Interfaccia LPC (Low Pin Count)
Funzioni di controllo dell’ambiente:
Monitoraggio hardware
Monitoraggio hardware
Funzione "Smart Guardian" di ITE
Funzione "Smart Guardian" di ITE
Alloggi DIMM DDR3 x 2
Alloggi DIMM DDR3 x 2
Capacità massima della memoria 8GB
Capacità massima della memoria 8GB
Ciascun DIMM supporta DDR3 512MB e
Ciascun DIMM supporta DDR3 512MB e
Memoria
1GB/2GB/4GB
1GB/2GB/4GB
principale
Modulo di memoria DDR3 a canale doppio
Modulo di memoria DDR3 a canale doppio
Supporto di DDR3 800 / 1066 / 1333
Supporto di DDR3 800 / 1066 / 1333
DIMM registrati e DIMM ECC non sono
DIMM registrati e DIMM ECC non sono
supportati
supportati
Integrata nel Chipset AMD 880G
Integrata nel Chipset AMD 785G
La memoria video condivisa massima è di
La memoria video condivisa massima è di
512 MB
512 MB
Grafica
IDE
SATA
Supporto DVI/HDMI/HDCP/UVD2
Supporto DVI/HDMI/HDCP/UVD2
Controller IDE integrato
Controller IDE integrato
Modalità Bus Master Ultra DMA 33 / 66 /
Modalità Bus Master Ultra DMA 33 / 66 /
100 / 133
100 / 133
Supporto modalità PIO Mode 0-4
Supporto modalità PIO Mode 0-4
Controller Serial ATA integrato
Controller Serial ATA integrato
Velocità di trasferimento dei dati fino a 3
Velocità di trasferimento dei dati fino a 3
Gb/s.
Gb/s.
Compatibile specifiche SATA Versione 2.0. Compatibile specifiche SATA Versione 2.0.
Realtek RTL 8111DL
LAN
Capacità Half / Full Duplex
34
Realtek RTL 8111DL
Negoziazione automatica 10 / 100 / 1000 Mb/s Negoziazione automatica 10 / 100 / 1000 Mb/s
Capacità Half / Full Duplex
A880G+/A785G3+
A880G+
Supporto
audio HD
Alloggi
Connettori
su scheda
A785G3+
ALC662
ALC662
Uscita audio 5.1 canali
Uscita audio 5.1 canali
Supporto audio High-Definit ion (HD)
Supporto audio High-Definit ion (HD)
Alloggio PCI Express Gen2 x16 x1
Alloggio PCI Express Gen2 x16 x1
Alloggio PCI
x2
Alloggio PCI
x2
Connettore floppy
x1
Connettore floppy
x1
Connettore IDE
x1
Connettore IDE
x1
Connettore SATA
x4
Connettore SATA
x4
Connettore pannello frontale
x1
Connettore pannello frontale
x1
Connettore audio frontale
x1
Connettore audio frontale
x1
Connettore output SPDIF
x1
Connettore output SPDIF
x1
Collettore ventolina CPU
x1
Collettore ventolina CPU
x1
Collettore ventolina sistema
x1
Collettore ventolina sistema
x1
Collettore cancellaz ione CMOS
x1
Collettore cancellaz ione CMOS
x1
Connettore USB
x2
Connettore USB
x2
Connettore alimentazione
x1
Connettore alimentazione
x1
(24 pin)
Connettore alimentazione
(24 pin)
x1
(4 pin)
Connettore alimentazione
x1
(4 pin)
Connettore IR del consumatore x1
Connettore IR del consumatore x1
Connettore Porta stampante
x1
Connettore Porta stampante
x1
Connettore Porta seriale
x1
Connettore Porta seriale
x1
Tastiera / Mouse PS/2
x1
Tastiera / Mouse PS/2
x1
Porta HDMI
x1
Porta HDMI
x1
I/O
Porta VGA
x1
Porta VGA
x1
pannello
Porta DVI-D
x1
Porta DVI-D
x1
x1
Porta LAN
x1
x4
Porta USB
x4
x3
Connettore audio
x3
posteriore Porta LAN
Porta USB
Connettore audio
Dimension
i scheda
200 mm (larghezza) x 244 mm (altezza)
200 mm (larghezza) x 244 mm (altezza)
Caratterist
iche
Supporto RAID 0 / 1 / 1+0
Supporto RAID 0 / 1 / 1+0
Windows XP / Vista / 7
Windows XP / Vista / 7
Biostar si riserva il diritto di aggiungere o
Biostar si riserva il diritto di aggiungere o
rimuovere il supporto di qualsiasi sistema
rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.
operativo senza preavviso.
speciali
Sistemi
operativi
supportati
35
Motherboard Manual
SPANISH
A880G+
A785G3+
Conector AM3
Conector AM3
Procesadores AMD Phenom II/ Athlon II
Procesadores AMD Phenom II/ Athlon II
La arquitectura AMD 64 permite el procesado de La arquitectura AMD 64 permite el procesado de
CPU
FSB
32 y 64 bits
32 y 64 bits
Soporta las tecnologías Hyper Transport 3.0 y
Soporta las tecnologías Hyper Transport 3.0 y
Cool’n’Quiet
Cool’n’Quiet
(Vatio máximo: 125W)
(Vatio máximo: 125W)
Admite HyperTransport 3.0 con un ancho de
Admite HyperTransport 3.0 con un ancho de
banda de hasta 5.2 GT/s
banda de hasta 5.2 GT/s
Conjunto
AMD 880G
AMD 785G
de chips
AMD SB710
AMD SB710
ITE 8721
ITE 8721
Le ofrece las funcionalidades heredadas de uso
Le ofrece las funcionalidades heredadas de uso
más común Súper E/S.
más común Súper E/S.
Interfaz de cuenta Low Pin
Interfaz de cuenta Low Pin
Iniciativas de control de entorno,
Iniciativas de control de entorno,
Monitor hardware
Monitor hardware
Función "Guardia inteligente" de ITE
Función "Guardia inteligente" de ITE
Ranuras DIMM DDR3 x 2
Ranuras DIMM DDR3 x 2
Capacidad máxima de memoria de 8GB
Capacidad máxima de memoria de 8GB
Cada DIMM admite DDR de 512MB y
Cada DIMM admite DDR de 512MB y
Memoria
1GB/2GB/4GB
1GB/2GB/4GB
principal
Módulo de memoria DDR3 de canal Doble
Módulo de memoria DDR3 de canal Doble
Admite DDR3 de 800 / 1066 / 1333
Admite DDR3 de 800 / 1066 / 1333
No admite DIMM registrados o DIMM
No admite DIMM registrados o DIMM
compatibles con ECC
compatibles con ECC
Integrados en el conjunto de chips AMD 880G
Integrados en el conjunto de chips AMD 785G
Memoria máxima de vídeo compartida de 512
Memoria máxima de vídeo compartida de 512
MB
MB
Admite DVI/HDMI/HDCP/UVD2
Admite DVI/HDMI/HDCP/UVD2
Controlador IDE integrado
Controlador IDE integrado
Súper E/S
Gráficos
IDE
SATA
Red Local
36
Modo bus maestro Ultra DMA 33 / 66 / 100 / 133 Modo bus maestro Ultra DMA 33 / 66 / 100 / 133
Soporte los Modos PIO 0~4,
Soporte los Modos PIO 0~4,
Controlador ATA Serie Integrado
Controlador ATA Serie Integrado
Tasas de transferencia de hasta 3 Gb/s.
Tasas de transferencia de hasta 3 Gb/s.
Compatible con la versión SATA 2.0.
Compatible con la versión SATA 2.0.
Realtek RTL 8111DL
Realtek RTL 8111DL
Negociación de 10 / 100 / 1000 Mb/s
Negociación de 10 / 100 / 1000 Mb/s
Funciones Half / Full dúplex
Funciones Half / Full dúplex
A880G+/A785G3+
A880G+
Soporte de
sonido HD
Ranuras
Conectores
en placa
A785G3+
ALC662
ALC662
Salida de sonido de 5.1 canales
Salida de sonido de 5.1 canales
Soporte de sonido Alta Definición
Soporte de sonido Alta Definición
Ranura PCI Express Gen2 x16
X1
Ranura PCI Express Gen2 x16
X1
Ranura PCI
X2
Ranura PCI
X2
Conector disco flexible
X1
Conector disco flexible
X1
Conector IDE
X1
Conector IDE
X1
Conector SATA
X4
Conector SATA
X4
Conector de panel frontal
X1
Conector de panel frontal
X1
Conector de sonido frontal
X1
Conector de sonido frontal
X1
Conector de salida S/PDIF
X1
Conector de salida S/PDIF
X1
Cabecera de ventilador de CPU
X1
Cabecera de ventilador de CPU
X1
Cabecera de ventilador de sistema X1
Cabecera de ventilador de sistema X1
Cabecera de borrado de CMOS
X1
Cabecera de borrado de CMOS
X1
Conector USB
X2
Conector USB
X2
Conector de alimentación
X1
Conector de alimentación
X1
(24 patillas)
Conector de alimentación
(24 patillas)
X1
(4 patillas)
Conector de alimentación
X1
(4 patillas)
Conector de IR del consumidor
X1
Conector de IR del consumidor
Conector Puerto de impresora
X1
Conector Puerto de impresora
X1
Conector Puerto serie
X1
Conector Puerto serie
X1
Teclado / Ratón PS/2
X1
Teclado / Ratón PS/2
X1
Ratón HDMI
X1
Ratón HDMI
X1
Panel
Puerto VGA
X1
Puerto VGA
X1
trasero de
Puerto DVI-D
X1
Puerto DVI-D
X1
E/S
Puerto de red local
X1
Puerto de red local
X1
Puerto USB
X4
Puerto USB
X4
Conector de sonido
X3
Conector de sonido
X3
Tamaño de
la placa
Funciones
especiales
200 mm. (A) X 244 Mm. (H)
Admite RAID 0 / 1 / 1+0
Soporte de Windows XP / Vista / 7
X1
200 mm. (A) X 244 Mm. (H)
Admite RAID 0 / 1 / 1+0
Windows XP / Vista / 7
sistema
Biostar se reserva el derecho de añadir o retirar Biostar se reserva el derecho de añadir o retirar
operativo
el soporte de cualquier SO con o sin aviso previo. el soporte de cualquier SO con o sin aviso previo.
37
Motherboard Manual
PORTUGUESE
A880G+
CPU
FSB
A785G3+
Socket AM3
Socket AM3
Processadores AMD Phenom II/ Athlon II
Processadores AMD Phenom II/ Athlon II
A arquitectura AMD 64 permite uma
A arquitectura AMD 64 permite uma
computação de 32 e 64 bits
computação de 32 e 64 bits
Suporta as tecnologias Hyper Transport 3.0 e
Suporta as tecnologias Hyper Transport 3.0 e
Cool’n’Quiet
Cool’n’Quiet
(Watt máximo: 125W)
(Watt máximo: 125W)
Suporta a tecnologia HyperTransport 3.0 com
Suporta a tecnologia HyperTransport 3.0 com
uma largura de banda até 5.2 GT/s
uma largura de banda até 5.2 GT/s
AMD 880G
AMD 785G
AMD SB710
AMD SB710
ITE 8721
ITE 8721
Proporciona as funcionalidades mais utilizadas
Proporciona as funcionalidades mais utilizadas
Especificaç
em termos da especificação Super I/O.
em termos da especificação Super I/O.
ão Super
Interface LPC (Low Pin Count).
Interface LPC (Low Pin Count).
I/O
Iniciativas para controlo do ambiente
Iniciativas para controlo do ambiente
Monitorização do hardware
Monitorização do hardware
Função "Smart Guardian" da ITE
Função "Smart Guardian" da ITE
Ranhuras DIMM DDR3 x 2
Ranhuras DIMM DDR3 x 2
Capacidade máxima de memória: 8 GB
Capacidade máxima de memória: 8 GB
Cada módulo DIMM suporta uma memória
Cada módulo DIMM suporta uma memória
Memória
DDR3 de 512 MB & 1 GB/2 GB/4 GB
DDR3 de 512 MB & 1 GB/2 GB/4 GB
principal
Módulo de memória DDR3 de canal duplo
Módulo de memória DDR3 de canal duplo
Suporta módulos DDR3 800 / 1066 / 1333
Suporta módulos DDR3 800 / 1066 / 1333
Os módulos DIMM registados e os DIMM ECC
Os módulos DIMM registados e os DIMM ECC
não são suportados
não são suportados
Integrada no chipset AMD 880G
Integrada no chipset AMD 785G
Memória de vídeo máxima partilhada: 512 MB
Memória de vídeo máxima partilhada: 512 MB
Suporta as funções DVI/HDMI/HDCP/UVD2
Suporta as funções DVI/HDMI/HDCP/UVD2
Controlador IDE integrado
Controlador IDE integrado
Chipset
Placa
gráfica
IDE
SATA
LAN
38
Modo Bus master Ultra DMA 33 / 66 / 100 / 133 Modo Bus master Ultra DMA 33 / 66 / 100 / 133
Suporta o modo PIO 0~4,
Suporta o modo PIO 0~4,
Controlador Serial ATA integrado
Controlador Serial ATA integrado
Velocidades de transmissão de dados até 3
Velocidades de transmissão de dados até 3
Gb/s.
Gb/s.
Compatibilidade com a especificação SATA
Compatibilidade com a especificação SATA
versão 2.0.
versão 2.0.
Realtek RTL 8111DL
Realtek RTL 8111DL
Auto negociação de 10 / 100 / 1000 Mb/s
Auto negociação de 10 / 100 / 1000 Mb/s
Capacidade semi/full-duplex
Capacidade semi/full-duplex
A880G+/A785G3+
A880G+
Suporte
para áudio
de alta
definição
Ranhuras
Conectores
na placa
A785G3+
ALC662
ALC662
Saída de áudio de 5.1 canais
Saída de áudio de 5.1 canais
Suporta a especificação High-Definition Audio
Suporta a especificação High-Definition Audio
Ranhura PCI Express Gen2 x16
x1
Ranhura PCI Express Gen2 x16
x1
Ranhura PCI
x2
Ranhura PCI
x2
Conector da unidade de disquetes
x1
Conector da unidade de disquetes
x1
Conector IDE
x1
Conector IDE
x1
Conector SATA
x4
Conector SATA
x4
Conector do painel frontal
x1
Conector do painel frontal
x1
Conector de áudio frontal
x1
Conector de áudio frontal
x1
Conector de saída S/PDIF
x1
Conector de saída S/PDIF
x1
Conector da ventoinha da CPU
x1
Conector da ventoinha da CPU
x1
Conector da ventoinha do sistema x1
x1
Conector para limpeza do CMOS
x1
Conector USB
x2
Conector USB
x2
Conector de alimentação
x1
Conector de alimentação
x1
(24 pinos)
Conector de alimentação
(24 pinos)
x1
(4 pinos)
Entradas/S
aídas no
painel
traseiro
Tamanho
da placa
Conector da ventoinha do sistema x1
Conector para limpeza do CMOS
Conector de alimentação
x1
(4 pinos)
Conector de IR do consumidor
x1
Conector de IR do consumidor
Conector da para impressora
x1
Conector da para impressora
x1
Conector da Porta série
x1
Conector da Porta série
x1
Teclado / Rato PS/2
x1
Teclado / Rato PS/2
x1
Porta HDMI
x1
Porta HDMI
x1
Porta VGA
x1
Porta VGA
x1
Porta DVI-D
x1
Porta DVI-D
x1
Porta LAN
x1
Porta LAN
x1
Porta USB
x4
Porta USB
x4
Tomada de áudio
x3
Tomada de áudio
x3
200 mm (L) X 244 mm (A)
x1
200 mm (L) X 244 mm (A)
Característi
cas
Suporta as funções RAID 0 / 1 / 1+0
Suporta as funções RAID 0 / 1 / 1+0
Windows XP / Vista / 7
Windows XP / Vista / 7
A Biostar reserva-se o direito de adicionar ou
A Biostar reserva-se o direito de adicionar ou
remover suporte para qualquer sistema
remover suporte para qualquer sistema
operativo com ou sem aviso prévio.
operativo com ou sem aviso prévio.
especiais
Sistemas
operativos
suportados
39
Motherboard Manual
POLISH
A880G+
Procesor
FSB
Chipset
A785G3+
Socket AM3
Socket AM3
AMD Phenom II/ Athlon II Procesory
AMD Phenom II/ Athlon II Procesory
Architektura AMD 64 umożliwia przetwarzanie
Architektura AMD 64 umożliwia przetwarzanie
32 i 64 bitowe
32 i 64 bitowe
Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet
Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet
(Maksymalny Watt: 125W)
(Maksymalny Watt: 125W)
Obsługa HyperTransport 3.0 o szerokości pasma Obsługa HyperTransport 3.0 o szerokości pasma
do 5.2 GT/s
do 5.2 GT/s
AMD 880G
AMD 785G
AMD SB710
AMD SB710
Gniazda DDR3 DIMM x 2
Gniazda DDR3 DIMM x 2
Maks. wielkość pamięci 8GB
Maks. wielkość pamięci 8GB
Każde gniazdo DIMM obsługuje moduły 512MB Każde gniazdo DIMM obsługuje moduły 512MB
Pamięć
oraz 1GB/2GB/4GB DDR3
oraz 1GB/2GB/4GB DDR3
główna
Moduł pamięci DDR3 z trybem podwójnego
Moduł pamięci DDR3 z trybem podwójnego
kanału
kanału
Obsługa DDR3 800 / 1066 / 1333
Obsługa DDR3 800 / 1066 / 1333
Super I/O
Grafika
IDE
SATA
LAN
40
Brak obsługi Registered DIMM oraz ECC DIMM
Brak obsługi Registered DIMM oraz ECC DIMM
ITE 8721
ITE 8721
Zapewnia najbardziej powszechne funkcje
Zapewnia najbardziej powszechne funkcje
Super I/O.
Super I/O.
Interfejs Low Pin Count
Interfejs Low Pin Count
Funkcje kontroli warunków pracy,
Funkcje kontroli warunków pracy,
Monitor H/W
Monitor H/W
Funkcja ITE "Smart Guardian"
Funkcja ITE "Smart Guardian"
Zintegrowana w chipsecie AMD 880G
Zintegrowana w chipsecie AMD 785G
Maks. wielkość współdzielonej pamięci video
Maks. wielkość współdzielonej pamięci video
wynosi 512 MB
wynosi 512 MB
Obsługa DVI/HDMI/HDCP/UVD2
Obsługa DVI/HDMI/HDCP/UVD2
Zintegrowany kontroler IDE
Zintegrowany kontroler IDE
Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master
obsługa PIO tryb 0~4,
obsługa PIO tryb 0~4,
Zintegrowany kontroler Serial ATA
Zintegrowany kontroler Serial ATA
Transfer danych do 3 Gb/s.
Transfer danych do 3 Gb/s.
Zgodność ze specyfikacją SATA w wersji 2.0.
Zgodność ze specyfikacją SATA w wersji 2.0.
Realtek RTL 8111DL
Realtek RTL 8111DL
110 / 100 / 1000 Mb/s z automatyczną
110 / 100 / 1000 Mb/s z automatyczną
negocjacją szybkości
negocjacją szybkości
Działanie w trybie połowicznego / pełnego
Działanie w trybie połowicznego / pełnego
dupleksu
dupleksu
A880G+/A785G3+
A880G+
Obsługa
audio HD
Gniazda
A785G3+
ALC662
ALC662
5.1 kanałowe wyjście audio
5.1 kanałowe wyjście audio
Obsługa High-Definition Audio
Obsługa High-Definition Audio
Gniazdo PCI Express Gen2 x16
x1
Gniazdo PCI Express Gen2 x16
x1
Gniazdo PCI
x2
Gniazdo PCI
x2
Złącze napędu dyskietek
x1
Złącze napędu dyskietek
x1
Złącze IDE
x1
Złącze IDE
x1
Złącze SATA
x4
Złącze SATA
x4
Złącze panela przedniego
x1
Złącze panela przedniego
x1
Przednie złącze audio
x1
Przednie złącze audio
x1
Złącze wyjścia S/PDIF
x1
Złącze wyjścia S/PDIF
x1
Złącza
Złącze główkowe wentylatora procesora x1
wbudowan
Złącze główkowe wentylatora systemowego x1 Złącze główkowe wentylatora systemowego x1
e
Złącze główkowe kasowania CMOS x1
Złącze główkowe kasowania CMOS x1
Złącze USB
x2
Złącze USB
Złącze zasilania (24 pinowe)
x1
Złącze zasilania (24 pinowe)
x1
Złącze zasilania (4 pinowe)
x1
Złącze zasilania (4 pinowe)
x1
Złącze Konsument IR
x1
Złącze Konsument IR
x1
Złącze Port drukarki
x1
Złącze Port drukarki
x1
Złącze Port szeregowy
x1
Złącze Port szeregowy
x1
Klawiatura / Mysz PS/2
x1
Klawiatura / Mysz PS/2
x1
Port HDMI
x1
Port HDMI
x1
Port VGA
x1
Port VGA
x1
Port DVI-D
x1
Port DVI-D
x1
Port LAN
x1
Port LAN
x1
Port USB
x4
Port USB
x4
Gniazdo audio
x3
Gniazdo audio
x3
Back Panel
I/O
Wymiary
płyty
Funkcje
200 mm (S) X 244 mm (W)
Złącze główkowe wentylatora procesora x1
x2
200 mm (S) X 244 mm (W)
Obsługa RAID 0 / 1 / 1+0
Obsługa RAID 0 / 1 / 1+0
Obsluga
Windows XP / Vista / 7
Windows XP / Vista / 7
systemu
Biostar zastrzega sobie prawo dodawania lub
Biostar zastrzega sobie prawo dodawania lub
specjalne
operacyjne odwoływania obsługi dowolnego systemu
odwoływania obsługi dowolnego systemu
go
operacyjnego bez powiadomienia.
operacyjnego bez powiadomienia.
41
Motherboard Manual
RUSSIAN
A880G+
Гнездо AM3
Процессоры AMD Phenom II/ Athlon II
CPU
Архитектура AMD 64 разрешать обработка
(центральны
данных на 32 и 64 бит
й процессор)
Поддержка Hyper Transport 3.0 и Cool’n’Quiet
(Максимальный ватт: 125W)
FSB
A785G3+
Гнездо AM3
Процессоры AMD Phenom II/ Athlon II
Архитектура AMD 64 разрешать обработка
данных на 32 и 64 бит
Поддержка Hyper Transport 3.0 и Cool’n’Quiet
(Максимальный ватт: 125W)
Поддержка HyperTransport 3.0 с пропускной Поддержка HyperTransport 3.0 с пропускной
способностью до 5.2 GT/s
способностью до 5.2 GT/s
Набор
микросхем
AMD 880G
AMD SB710
Основная
память
Слоты DDR3 DIMM x 2
Слоты DDR3 DIMM x 2
Максимальная ёмкость памяти 8 ГБ
Максимальная ёмкость памяти 8 ГБ
Каждый модуль DIMM поддерживает 512МБ Каждый модуль DIMM поддерживает 512МБ
& 1ГБ/2ГБ/4ГБ DDR3
& 1ГБ/2ГБ/4ГБ DDR3
Модуль памяти с двухканальным режимом Модуль памяти с двухканальным режимом
DDR3
DDR3
Поддержка DDR3 800 / 1066 / 1333
Поддержка DDR3 800 / 1066 / 1333
Не поддерживает зарегистрированные
Не поддерживает зарегистрированные
модули DIMM and ECC DIMM
модули DIMM and ECC DIMM
Super I/O
ITE 8721
Обеспечивает наиболее используемые
действующие функциональные
возможности Super I/O.
Интерфейс с низким количеством выводов
Инициативы по охране окружающей среды,
Аппаратный монитор
Функция ITE "Smart Guardian"
(Интеллектуальная защита)
ITE 8721
Обеспечивает наиболее используемые
действующие функциональные
возможности Super I/O.
Интерфейс с низким количеством выводов
Инициативы по охране окружающей среды,
Аппаратный монитор
Функция ITE "Smart Guardian"
(Интеллектуальная защита)
Графика
Встроенная в набор микросхем AMD 880G
Максимальная совместно используемая
видео память составляет 512 МБ
Поддержка DVI/HDMI/HDCP/UVD2
Встроенная в набор микросхем AMD 785G
Максимальная совместно используемая
видео память составляет 512 МБ
Поддержка DVI/HDMI/HDCP/UVD2
IDE
Встроенное устройство управления
встроенными интерфейсами устройств
Режим "хозяина" шины Ultra DMA 33 / 66 /
100 / 133
Поддержка режима PIO 0~4,
Встроенное устройство управления
встроенными интерфейсами устройств
Режим "хозяина" шины Ultra DMA 33 / 66 /
100 / 133
Поддержка режима PIO 0~4,
SATA
Встроенное последовательное устройство
управления ATA
скорость передачи данных до 3 гигабит/с.
Соответствие спецификации SATA версия
2.0.
Встроенное последовательное устройство
управления ATA
скорость передачи данных до 3 гигабит/с.
Соответствие спецификации SATA версия
2.0.
Локальная
сеть
Realtek RTL 8111DL
Автоматическое согласование 10 / 100 /
1000 Мб/с
Частичная / полная дуплексная способность
Realtek RTL 8111DL
Автоматическое согласование 10 / 100 /
1000 Мб/с
Частичная / полная дуплексная способность
42
AMD 785G
AMD SB710
A880G+/A785G3+
A880G+
A785G3+
Звуковая
поддержка
жесткого
диска
ALC662
Звуковая поддержка High-Definition
5.1канальный звуковой выход
ALC662
Звуковая поддержка High-Definition
5.1канальный звуковой выход
Слоты
Слот PCI Express Gen2 x16
Слот PCI
Слот PCI Express Gen2 x16
Слот PCI
Встроенный
разъём
Задняя
панель
средств
ввода-вывод
а
Размер
панели
x1
x2
Разъём НГМД
x1
Разъём IDE
x1
Разъём SATA
x4
Разъём на лицевой панели
x1
Входной звуковой разъём
x1
Разъём вывода для S/PDIF
x1
Контактирующее приспособление
вентилятора центрального
процессора
x1
Разъём НГМД
x1
Разъём IDE
x1
Разъём SATA
x4
Разъём на лицевой панели
x1
Входной звуковой разъём
x1
Разъём вывода для S/PDIF
x1
Контактирующее приспособление
вентилятора центрального
процессора
x1
Контактирующее приспособление
вентилятора системы
x1
Открытое контактирующее
приспособление CMOS
x1
USB-разъём
x2
Разъем питания (24 вывод)
x1
Разъем питания (4 вывод)
x1
Разъём едока ИКЫЙ
x1
Разъём Порт подключения
принтера
x1
Разъём Последовательный порт x1
Контактирующее приспособление
вентилятора системы
x1
Открытое контактирующее
приспособление CMOS
x1
USB-разъём
x2
Разъем питания (24 вывод)
x1
Разъем питания (4 вывод)
x1
Разъём едока ИКЫЙ
x1
Разъём Порт подключения
принтера
x1
Разъём Последовательный порт x1
Клавиатура / Мышь PS/2
Порт HDMI
Порт VGA
Порт DVI-D
Порт LAN
USB-порт
Гнездо для подключения
наушников
Клавиатура / Мышь PS/2
Порт HDMI
Порт VGA
Порт DVI-D
Порт LAN
USB-порт
Гнездо для подключения
наушников
x1
x1
x1
x1
x1
x4
x3
200 мм (Ш) X 244 мм (В)
Специальные
технические
Поддержка RAID 0 / 1 / 1+0
характеристи
ки
Поддержка
OS
x1
x2
Windows XP / Vista / 7
Biostar сохраняет за собой право добавлять
или удалять средства обеспечения для OS с
или без предварительного уведомления.
x1
x1
x1
x1
x1
x4
x3
200 мм (Ш) X 244 мм (В)
Поддержка RAID 0 / 1 / 1+0
Windows XP / Vista / 7
Biostar сохраняет за собой право добавлять
или удалять средства обеспечения для OS с
или без предварительного уведомления.
43
‫‪Motherboard Manual‬‬
‫‪ARABIC‬‬
‫‪A880G+‬‬
‫وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ‬
‫اﻟﻤﺮآﺰیﺔ‬
‫‪A785G3+‬‬
‫‪AM3‬ﻣﻘﺒﺲ‬
‫‪ AM3‬ﻣﻘﺒﺲ ‪A‬ﻣﻘﺒﺲ‬
‫‪AMD Phenom II/ Athlon II‬ﻣﻌﺎﻟﺠﺎت‬
‫‪AMD Phenom II/ Athlon II‬ﻣﻌﺎﻟﺠﺎت‬
‫إﺝﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ ‪ 32‬و‪ 64‬ﺏﺖ‪AMD 64‬ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ‬
‫إﺝﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ ‪ 32‬و‪ 64‬ﺏﺖ‪AMD 64‬ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ‬
‫‪ Cool’n’Quiet‬و ‪Hyper Transport 3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ Cool’n’Quiet‬و ‪Hyper Transport 3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫)و‪: 125‬ﻗﺼ ﻮى واط(‬
‫)و‪: 125‬ﻗﺼ ﻮى واط(‬
‫اﻟﻨﺎﻗﻞ اﻷﻣﺎﻣﻲ اﻟﺠﺎﻥﺒﻲ ‪ 5.2 GT/s‬ﺏﺘﺮدد یﺼﻞ إﻟﻰ‪HyperTransport 3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬
‫‪Super I/O‬‬
‫‪AMD 880G‬‬
‫‪AMD 785G‬‬
‫‪AMD SB710‬‬
‫‪AMD SB710‬‬
‫‪ITE 8721‬‬
‫‪ITE 8721‬‬
‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻣًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬
‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻣًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬
‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬
‫ﻣﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺡﺎﻟﺔ اﻷﺝﻬﺰة‬
‫ﻣﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺡﺎﻟﺔ اﻷﺝﻬﺰة‬
‫‪ ITE‬ﻣﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫‪ ITE‬ﻣﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬
‫ﺏﻄﺎﻗﺔ اﻟﺮﺳﻮﻣﺎت‬
‫ﻣﻨﻔﺬ ‪IDE‬‬
‫‪SATA‬‬
‫ﺵﺒﻜﺔ داﺥﻠﻴﺔ‬
‫‪ 5.2 GT/s‬ﺏﺘﺮدد یﺼﻞ إﻟﻰ‪HyperTransport 3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫ﻋﺪد‪2‬‬
‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬
‫ﻋﺪد‪2‬‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 8‬ﺝﻴﺠﺎ ﺏﺎیﺖ‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 8‬ﺝﻴﺠﺎ ﺏﺎیﺖ‬
‫ﻣﻴﺠﺎ ﺏﺎیﺖ ‪ 512‬ﺳﻌﺔ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫ﻣﻴﺠﺎ ﺏﺎیﺖ ‪ 512‬ﺳﻌﺔ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫و‪ /1‬و‪ /2‬و‪ 4‬ﺝﻴﺠﺎ ﺏﺎیﺖ‬
‫و‪ /1‬و‪ /2‬و‪ 4‬ﺝﻴﺠﺎ ﺏﺎیﺖ‬
‫ﻣﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR3‬وﺡﺪة ذاآﺮة‬
‫ﻣﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR3‬وﺡﺪة ذاآﺮة‬
‫ﺳﻌﺎت ‪ 1333 / 1066 / 800‬ﻣﻴﺠﺎ ﺏﺎیﺖ‪DDR3‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻣﻦ ﻥﻮع‬
‫ﺳﻌﺎت ‪ 1333 / 1066 / 800‬ﻣﻴﺠﺎ ﺏﺎیﺖ‪DDR3‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻣﻦ ﻥﻮع‬
‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻣﻊ ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲ ﻻ ﺗﺘﻮاﻓﻖ ﻣﻊ ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫‪ AMD 880G‬ﻣﺪﻣﺠﺔ ﻓﻲ رﻗﺎﺋﻖ‬
‫‪ AMD 785G‬ﻣﺪﻣﺠﺔ ﻓﻲ رﻗﺎﺋﻖ‬
‫ﻣﻴﺠﺎ ﺏﺎیﺖ‪512‬أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪیﻮ اﻟﻤﺸﺘﺮآﺔ‬
‫ﻣﻴﺠﺎ ﺏﺎیﺖ‪512‬أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪیﻮ اﻟﻤﺸﺘﺮآﺔ‬
‫‪DVI/HDMI/HDCP/UVD2‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪DVI/HDMI/HDCP/UVD2‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫ﻣﺘﻜﺎﻣﻞ‪IDE‬ﻣﺘﺤﻜﻢ‬
‫ﻣﺘﻜﺎﻣﻞ‪IDE‬ﻣﺘﺤﻜﻢ‬
‫وﺿﻊ رﺋﻴﺴﻲ‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺏﺘﻘﻨﻴﺔ‬
‫وﺿﻊ رﺋﻴﺴﻲ‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺏﺘﻘﻨﻴﺔ‬
‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬
‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬
‫ﻣﺘﻜﺎﻣﻞ‪Serial ATA‬ﻣﺘﺤﻜﻢ‬
‫ﻣﺘﻜﺎﻣﻞ‪Serial ATA‬ﻣﺘﺤﻜﻢ‬
‫ﺝﻴﺠﺎﺏﺖ‪/‬ﺙﺎﻥﻴﺔ‪3.‬ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ‬
‫ﺝﻴﺠﺎﺏﺖ‪/‬ﺙﺎﻥﻴﺔ‪3.‬ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ‬
‫‪ 2.0.‬اﻹﺹﺪار ‪SATA‬ﻣﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪ 2.0.‬اﻹﺹﺪار ‪SATA‬ﻣﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪Realtek RTL 8111DL‬‬
‫‪Realtek RTL 8111DL‬‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺏﺎیﺖ ‪ /‬ﺙﺎﻥﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺏﺖ‪/‬ﺙﺎﻥﻴﺔ‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺏﺎیﺖ ‪ /‬ﺙﺎﻥﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺏﺖ‪/‬ﺙﺎﻥﻴﺔ‬
‫إﻣﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫إﻣﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫‪44‬‬
‫‪A880G+/A785G3+‬‬
‫‪A880G+‬‬
‫دﻋﻢ اﻟﺼﻮت ﻋﺎﻟﻲ‬
‫اﻟﺘﻌﺮیﻒ‬
‫‪A785G3+‬‬
‫‪ALC662‬‬
‫‪ALC662‬‬
‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪5.1‬‬
‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪5.1‬‬
‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮیﻒ ﻣﻦ‬
‫اﻟﻔﺘﺤﺎت‬
‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬
‫اﻟﻠﻮﺡﺔ‬
‫ﻣﻨﺎﻓﺬ دﺥﻞ‪/‬ﺥﺮج‬
‫اﻟﻠﻮﺡﺔ اﻟﺨﻠﻔﻴﺔ‬
‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮیﻒ ﻣﻦ‬
‫ﻓﺘﺤﺔ ‪PCI Express Gen2 x16‬‬
‫ﻋﺪد ‪1‬‬
‫ﻓﺘﺤﺔ ‪PCI Express Gen2 x16‬‬
‫ﻋﺪد ‪1‬‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻋﺪد‪2‬‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻋﺪد‪2‬‬
‫ﻣﻨﻔﺬ ﻣﺤﺮك أﻗﺮاص ﻣﺮﻥﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﻣﺤﺮك أﻗﺮاص ﻣﺮﻥﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ‪IDE‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ‪IDE‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ‪SATA‬‬
‫ﻋﺪد‪4‬‬
‫ﻣﻨﻔﺬ ‪SATA‬‬
‫ﻋﺪد‪4‬‬
‫ﻣﻨﻔﺬ اﻟﻠﻮﺡﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ اﻟﻠﻮﺡﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺥﺮج ‪S/PDIF‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺥﺮج ‪S/PDIF‬‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻣﺮوﺡﺔ وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻣﺮوﺡﺔ وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻣﺮوﺡﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻣﺮوﺡﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻣﺴﺢ ‪CMOS‬‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻣﺴﺢ ‪CMOS‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ‪USB‬‬
‫ﻋﺪد ‪2‬‬
‫ﻣﻨﻔﺬ ‪USB‬‬
‫ﻋﺪد ‪2‬‬
‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺏﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺏﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺏﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺏﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ اﻷﺡﻤﺮ ﺗﺤ ﺖ ﻣﺴ ﺘﻬﻠﻜﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ اﻷﺡﻤﺮ ﺗﺤ ﺖ ﻣﺴ ﺘﻬﻠﻜﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﻃﺎﺏﻌﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﻃﺎﺏﻌﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻟﻮﺡﺔ ﻣﻔﺎﺗﻴﺢ ‪ /‬ﻣﺎوس ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻟﻮﺡﺔ ﻣﻔﺎﺗﻴﺢ ‪ /‬ﻣﺎوس ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪HDMI‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪HDMI‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪VGA‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪VGA‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪DVI-D‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪DVI-D‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻣﺤﻠﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻣﺤﻠﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪USB‬‬
‫ﻋﺪد ‪4‬‬
‫ﻣﻨﺎﻓﺬ ‪USB‬‬
‫ﻋﺪد ‪4‬‬
‫ﻋﺪد ‪3‬‬
‫ﻣﻘﺒﺲ ﺹﻮت‬
‫ﻣﻘﺒﺲ ﺹﻮت‬
‫ﺡﺠﻢ اﻟﻠﻮﺡﺔ‬
‫‪ 200‬ﻣﻢ )ﻋﺮض( ‪ 244 X‬ﻣﻢ )ارﺗﻔﺎع(‬
‫‪ 200‬ﻣﻢ )ﻋﺮض( ‪ 244 X‬ﻣﻢ )ارﺗﻔﺎع(‬
‫ﻣﺰایﺎ ﺥﺎﺹﺔ‬
‫‪RAID 0 / 1 / 1+0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪RAID 0 / 1 / 1+0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬
‫‪45‬‬
‫ﻋﺪد ‪3‬‬
‫‪Windows XP / Vista / 7‬‬
‫‪Windows XP / Vista / 7‬‬
‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر أو ‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر أو ‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫ﺏﺪون إﺥﻄﺎر‪.‬‬
‫ﺏﺪون إﺥﻄﺎر‪.‬‬
Motherboard Manual
JAPANESE
A880G+
A785G3+
Socket AM3
Socket AM3
AMD Phenom II/ Athlon II プロセッサ
AMD Phenom II/ Athlon II プロセッサ
AMD 64アーキテクチャでは、32ビットと64ビット計 AMD 64アーキテクチャでは、32ビットと64ビット計
CPU
FSB
算が可能です
算が可能です
ハイパートランスポート3.0とクールアンドクワイア
ハイパートランスポート3.0とクールアンドクワイア
ットをサポートします
ットをサポートします
(最高のワット: 125W)
(最高のワット: 125W)
5.2 GT/sのバンド幅までハイパートランスポート3.0 5.2 GT/sのバンド幅までハイパートランスポート3.0
をサポートします
をサポートします
チップセッ
AMD 880G
AMD 785G
ト
AMD SB710
AMD SB710
DDR3 DIMMスロット x 2
DDR3 DIMMスロット x 2
最大メモリ容量8GB
最大メモリ容量8GB
メインメモ
リ
各DIMMは 512MB & 1GB/2GB/4GB DDR3をサポ 各DIMMは 512MB & 1GB/2GB/4GB DDR3をサポ
ート
ート
デュアル チャンネルモードDDR3メモリモジュール
デュアル チャンネルモードDDR3メモリモジュール
DDR3 800 / 1066 / 1333 をサポート
DDR3 800 / 1066 / 1333 をサポート
登録済みDIMMとECC DIMMはサポートされません
登録済みDIMMとECC DIMMはサポートされません
ITE 8721
ITE 8721
もっとも一般に使用されるレガシーSuper I/O機能を もっとも一般に使用されるレガシーSuper I/O機能を
Super I/O
グラフィッ
クス
IDE
SATA
LAN
46
採用しています。
採用しています。
低ピンカウントインターフェイス
低ピンカウントインターフェイス
環境コントロールイニシアチブ、
環境コントロールイニシアチブ、
H/Wモニター
H/Wモニター
ITEの「スマートガーディアン」機能
ITEの「スマートガーディアン」機能
AMD 880Gチップセットに統合
AMD 785Gチップセットに統合
最大の共有ビデオメモリは512MBです
最大の共有ビデオメモリは512MBです
DVI/HDMI/HDCP/UVD2 のサポート
DVI/HDMI/HDCP/UVD2 のサポート
統合IDEコントローラ
統合IDEコントローラ
Ultra DMA 33 / 66 / 100 / 133バスマスタモード
Ultra DMA 33 / 66 / 100 / 133バスマスタモード
PIO Mode 0~4のサポート、
PIO Mode 0~4のサポート、
統合シリアルATAコントローラ
統合シリアルATAコントローラ
最高3Gb/秒のデータ転送速度
最高3Gb/秒のデータ転送速度
SATAバージョン2.0仕様に準拠。
SATAバージョン2.0仕様に準拠。
Realtek RTL 8111DL
Realtek RTL 8111DL
10 / 100 / 1000 Mb/秒のオートネゴシエーション
10 / 100 / 1000 Mb/秒のオートネゴシエーション
半/全二重機能
半/全二重機能
A880G+/A785G3+
A880G+
A785G3+
HDオーディ ALC662
ALC662
オのサポー
5.1チャンネルオーディオアウト
5.1チャンネルオーディオアウト
ト
ハイデフィニションオーディオのサポート
ハイデフィニションオーディオのサポート
スロット
オンボード
コネクタ
背面パネル
I/O
ボードサイ
ズ
特殊機能
PCI Express Gen2 x16スロット
x1
PCI Express Gen2 x16スロット
x1
PCIスロット
x2
PCIスロット
x2
フロッピーコネクタ
x1
フロッピーコネクタ
x1
IDEコネクタ
x1
IDEコネクタ
x1
SATAコネクタ
x4
SATAコネクタ
x4
フロントパネルコネクタ
x1
フロントパネルコネクタ
x1
フロントオーディオコネクタ
x1
フロントオーディオコネクタ
x1
S/PDIFアウトコネクタ
x1
S/PDIFアウトコネクタ
x1
CPUファンヘッダ
x1
CPUファンヘッダ
x1
システムファンヘッダ
x1
システムファンヘッダ
x1
CMOSクリアヘッダ
x1
CMOSクリアヘッダ
x1
USBコネクタ
x2
USBコネクタ
x2
電源コネクタ(24ピン)
x1
電源コネクタ(24ピン)
x1
電源コネクタ(4ピン)
x1
電源コネクタ(4ピン)
x1
消費者IRコネクタ
x1
消費者IRコネクタ
x1
プリンタポートコネクタ
x1
プリンタポートコネクタ
x1
シリアルポートコネクタ
x1
シリアルポートコネクタ
x1
PS/2キーボード / マウス
x1
PS/2キーボード / マウス
x1
HDMIポート
x1
HDMIポート
x1
VGAポート
x1
VGAポート
x1
DVI-Dポート
x1
DVI-Dポート
x1
LANポート
x1
LANポート
x1
USBポート
x4
USBポート
x4
オーディオジャック
x3
オーディオジャック
x3
200 mm (幅) X 244 mm (高さ)
200 mm (幅) X 244 mm (高さ)
RAID 0 / 1 / 1+0 のサポート
RAID 0 / 1 / 1+0 のサポート
Windows XP / Vista / 7
Windows XP / Vista / 7
OSサポート Biostarは事前のサポートなしにOSサポートを追加ま Biostarは事前のサポートなしにOSサポートを追加ま
たは削除する権利を留保します。
たは削除する権利を留保します。
2010/05/19
47