Agilent Technologies:
We engineer our scopes for you
When you tell us about the test and debug challenges you face,
we listen.
update rate. The Infiniium multi-chip module supports the industry’s lowest noise
We need your input to design scopes that help you master your challenges. We
frequency response on the market.
don’t build “me-too” products and we don’t develop technical solutions in search
of a problem to solve. Instead we bring you products with imaginative capabilities
Oscilloscope Market Growth
Source: Prime Data 2002-11 CAGR*
that meet your toughest demands.
floor at every bandwidth. And the InfiniiMax probing system provides the flattest
Our scopes give you the answers you need, not just measurements.
Technology alone isn’t enough – you want fast, accurate answers to your
questions. That’s why we offer the largest range of application-specific software
available anywhere, plus an outstanding selection of probes and accessories.
14%
With flexible solutions like these, you can easily customize your instrument as
12%
your design environment changes.
10%
13.5%
8%
6%
4%
5.5%
*CAGR = Compound
Annual Growth Rate
2%
0%
Agilent Technologies
Oscilloscope Market
It’s no surprise that Agilent is the fastest-growing vendor in the
scope market.*
To enable our scopes to operate at high frequencies
with minimal electromagnetic interference (EMI),
we relied on our expertise in radio frequency (RF)
technology. Instead of implementing each
component of a digital circuit in a separate circuit
block, we created a multi-chip module that uses
a Faraday cage to isolate EMI. The result? Highbandwidth scopes with the lowest noise floor in
the industry.
In the past three years, we’ve completely refreshed our scope lineup, with new
entries from InfiniiVision portables to Infiniium powerhouses. We’ve received
With our comprehensive portfolio, you’ll find a scope that fits your
needs perfectly.
numerous industry awards for our breakthroughs. But more importantly, our
Whether your main consideration is price point or performance level, we offer a
that improve our world.
variety of models that will work for you. Our platforms range from USB-modular
*Source PrimeData
units to high-performance real-time and sampling scopes, with bandwidths from
Infiniium multi-chip module isolates EMI.
scopes contribute to your success – and ultimately help you build the products
Here are just a few awards earned by Agilent scopes:
20 MHz to more than 90 GHz. When your requirements change, so can your
InfiniiVision ASIC chip enables MegaZoom.
scope, thanks to the availability of extensive hardware and software upgrades.
Each of our scopes incorporates the innovative technology you expect
from Agilent.
Infiniium 90000 X-Series
Infiniium 90000 Series
Oscilloscope Company
of the Year
Infiniium 90000 X-Series
Infiniium 90000 X-Series
Infiniium 90000 Series
InfiniiVision X-Series
Infiniium 90000 X-Series
As the world’s largest test and measurement company, Agilent commands a
breadth of engineering knowledge that enables us to deliver unique technology.
Our custom MegaZoom IV ASIC powers InfiniiVision’s unmatched waveform
Agilent Family | 2
InfiniiVision scopes incorporate acquisition
memory, waveform processing, and display
memory in an advanced .13m ASIC. This patented
4th generation technology, known as MegaZoom
IV, delivers up to 1,000,000 waveforms (acquisitions) per second with responsive deep memory
always available.
U1600 Handheld Oscilloscope
U2700 USB Modular Oscilloscopes
1000 Series Oscilloscopes
3000 X-Series Oscilloscopes
4000 X-Series Oscilloscopes
6000L Series Oscilloscopes
90000A Series Oscilloscopes
90000 X-Series Oscilloscopes
90000 Q-Series Oscilloscopes
2000 X-Series Oscilloscopes
7000B Series Oscilloscopes
86100D DCA-X Series Oscilloscopes
9000 Series Oscilloscopes
Probes and Applications
Agilent Family | 3
Model comparison chart
U1600
2700
1000
2000X
3000X
4000X
6000/7000
9000
90000A
90000X/Q
86100D
Channels
2
2
2, 4
2, 2+8, 4, 4+8
2, 2+16, 4, 4+16
2, 2+16, 4, 4+16
2, 2+16, 4, 4+16
4 , 4+16
4
4
Up to 16
Bandwidth
20 MHz
to 200 MHz
100 MHz
to 200 MHz
50 MHz
to 200 MHz
70 MHz
to 200 MHz
100 MHz
to 1 GHz
200 MHz
to 1.5 GHz
100 MHz
to 1 GHz
600 MHz
to 4 GHz
2.5 GHz
to 13 GHz
16 GHz
to 63 GHz
Module dependent
to 65 GHz optical,
90 GHz electrical
Sample rate
Up to 2 GSa/s
1 GSa/s
Up to 2 GSa/s
2 GSa/s
Up to 5 GSa/s
Up to 5 GSa/s
4 GSa/s
Up to 20 GSa/s
20 or 40 GSa/s
on all 4 channels
Up to 80 GSa/s on 4
40 kSa/s
channels and 160 GSa/s on
2 channels
Memory depth
Up to 2 Mpts
32 Mpts, std.
Up to 10 kpts
100 kpts
2 Mpts, std.
Up to 4 Mpts, opt.
4 Mpts, std.
8 Mpts, std.
20 Mpts/channel, std.
10 Mpts, std.
Up to 1 Gpts, opt.
Up to 2 Gpts
Limited by hard drive
Connectivity
& storage
USB 2.0 host/device port:
std (U1610A/20A)
USB 2.0 device port: std
(U1602B/04B)
*USB 2.0 host port Option 001
USB device: std.
USB 2.0 host (one
front, one back)
and device
USB host (one front,
one back), USB
device, LAN: opt., VGA:
opt., GPIB: opt.
USB host (one front, one
back), USB
device, LAN: opt.,
VGA: opt., GPIB: opt.
USB 2.0 (device and host
x3), LAN, VGA out, opt
GPIB-LAN adaptor
USB (device and host), LAN,
XGA-out: std.
USB 2.0, LAN, I/O ports,
RS-232, parallel,
dual-monitor video,
auxiliary output
USB 2.0 host and
device, Gigabit
Ethernet: std., GPIB: opt.
USB 2.0 host and
device, Gigabit
Ethernet: std., GPIB: opt.
USB 2.0, LAN, RS-232,
VGA-out, parallel,
PS/2, GPIB:out
Waveform math
& analysis
Waveform math and
FFT. Complimentary
PC link software, USB
cable can be used to
quickly transfer data to
a PC for further postprocessing and analysis.
Waveform math and
FFT. Data can easily be transferred to an
external PC for further
post-processing and
analysis.
Waveform math and FFT. Waveform math,
Data can easily be trans- InfiniiView offline
ferred to an external PC analysis and FFT. Data
for further post-processing can easily be transferred
to an external PC for
and analysis.
further post-processing
and analysis.
Waveform math, InfiniiView
offline analysis and FFT.
Data can easily be transferred to an external PC for
further post-processing and
analysis.
Waveform math, InfiniiView
offline analysis and FFT.
Data can easily be transferred to an external PC for
further post-processing and
analysis.
Waveform math,
InfiniiView offline analysis
and FFT. Data can easily
be transferred to an
external PC for further postprocessing
and analysis.
Up to four independent/
cascaded math functions,
FFT, eye, jitter, standards
compliance, InfiniiView
offline analysis, Matlab (opt),
Windows 7 based-system.
Up to four independent/
cascaded math functions,
FFT, eye, jitter, standards
compliance, InfiniiView
offline analysis, Matlab (opt),
Windows 7 based-system.
Up to four independent/
cascaded math functions, FFT,
eye, jitter, standards compliance,
InfiniiView
offline analysis, Matlab (opt),
Windows 7 based-system.
TDR, S-Parameters, eye
diagram analyzer, advanced
jitter and
amplitude analysis, deembed, embed, FFT, phase
noise analysis
application, MATLAB: opt.
High performance handheld scope for installation
and maintenance in the
industrial power, utilities/
facilities, automotive and
A/D industries. The scope
isolated channels enables
floating voltage measurement for industrial
customers (for U1610A/
U1620A only).
Portable scope
ideal for electronics
troubleshooting and
functional test as well
as educational teaching and
research labs. Also suitable for road warriors.
Portable economy oscilloscope for low-speed
design and debug, as
well as educational
and design labs where
bench space and
budget are limited.
Portable economy oscilloscope with
serial protocol analysis,
ideal for mixed-signal and
embedded designs as
well as educational and
design labs where bench
space and
budget are limited.
High-performance
portable oscilloscope ideal
for debugging applications.
Large, capacitive touch
screen and fast update
rate make it ideal for
signal viewing and analysis
of infrequent events.
Integrated capabilities
of five instruments plus
a comprehensive list of
applications provides
the most measurement
flexibility.
High-performance portable
scope ideal for mixed-signal
and embedded designs.
Large high-resolution display
makes it the best scope for
signal viewing and capturing
intermittent glitches and signal
transients. Comprehensive
software suite provides insight
into application-specific
problems.
High-performance oscilloscope
designed for engineers
who need to solve a variety
of debug
issues across analog, digital,
and protocol domains. .
High-performance real-time
oscilloscope provides superior
signal integrity. Addressing
the needs for high-speed
digital and RF applications.
More than 29 applications
for compliance, debugging,
and analysis.
High-performance, real-time
scope provides industry’s
highest real-time scope
measurement accuracy.
Supports high-speed digital and
RF applications and emerging
technologies. More than 25
applications for compliance,
debugging, and analysis.
High-performance,
high bandwidth
multi-function sampling scope
for serial bus
applications, optical,
TDR/TDT and any signal
requiring advanced jitter
analysis.
Market
Agilent Family | 4
Portable economy oscilloscope for low-speed
design and debug, as
well as educational
and design labs where
bench space and
budget are limited.
CONTENTS
Infiniium 90000 X-Series
Infiniium 90000 Series
Oscilloscope Company
of the Year
Infiniium 90000 X-Series
Infiniium 90000 X-Series
Infiniium 90000 Series
InfiniiVision X-Series
Infiniium 90000 X-Series
U1600
Page 6
U2700
Page 8
2000X
Page 10
3000X
Page 12
4000X
Page 14
6000, 7000B
Page 16
9000
Page 18
90000A
Page 20
90000X
Page 22
90000Q
Page 24
86100D
Page 26
Applications
Page 28
Probes
Page 33
Agilent Family | 5
20 MHz to 200 MHz handheld scopes
Engineered for performance in rugged and portable applications
• See more clearly and differentiate simultaneous signals from both channels
more easily with a 5.7 inch VGA TFT LCD display or 4.5” LCD color display*
• Up to 1 GSa/s per channel real time sampling rate and 1 Mpts recording length
ensure you get high performance, even on a handheld
• Up to 4 hours battery life and robust package – makes an ideal companion
for I&M personnel and those on the go
• Three-in-one solution: Dual-channel scope, true RMS DMM and real time data logger
• Scopes isolated channels enable floating measurements capability on the
U1610A/20A
• High speed USB port for a quick and convenient way to save data into USB flash drive
and/or to remote access using the scope**
*5.7 inch VGA TFT LCD display
for U1610A/ 20A and 4.5
inch LCD color display for
U1602B/04B
**USB host- Opt 001 is optional
for U1602B/U1604B only
6 | www.agilent.com/find/1600family
Handheld high performance. In-plant or off-site,
take advantage of a fully featured scope with
22 automatic measurement functions, advanced
triggering, high sampling rate and deep memory.
High-precision zoom-in capability. Deep memory
and a high sampling rate let you capture long
time spans and non-repeating signals, then zoom
in to the segment of interest to scrutinize subtle
details.
VGA display. View waveforms under all lighting
conditions, including in indoor, outdoor and dark
environments. (U1610A/20A only)
Scope additions and enhancements
Models and specifications
Bandwidth
Sample rate
Record length
U1602B
U1604B
20 MHz
40 MHz
100 MHz
200 MHz
2 GSa/s*or 1 GSa/s**
Up to 125 Kpts
Up to 120 Kpts
Input impedance
Timebase range
Triggering
Dimensions
Weight
Battery life
Up to 2 Mpts
2
4.5” color CSTN LCD (320x240)
5.7” VGA TFT LCD
N/A
Yes
Vertical resolution
Maximum input
U1620A
1 GSa/s*or 500 MSa/s**
Channel isolation
Vertical sensitivity
U1610A
200 MSa/s*or 100 MSa/s**
Channels
Display
Easy connections. PC Link software handles your
data collection, storage and documentation needs
– or lets you control the unit remotely – using a
USB 2.0 full-speed connection.
8-bits
5 mV/div to 100 V/div
2 mV/div to 50 V/div
CAT III 300 Vrms (up to 400 Hz) from terminal to ground
CAT III 600 V (with 10:1 probe), CAT III 300 V (direct)
1 MΩ II < 20 pF
50 ns to 50 s/div
10 ns to 50 s/div
1 MΩ ± 1% ≈ 22 pF ± 3 Pf
5 ns/div to 50 s/div
Probes – Improve your measurement reliability with our
comprehensive selection of probes:
• All models come with the U1561A CATIII 600V probe
• See our complete list of compatible probes on
pages 34-35
Accessories – Don’t forget options that make measurements faster and more convenient, such as the CATIII 600V
100:1 probe, Desktop charger & Li-Ion battery pack, AC
current clamp, temperature adapter, carrying case and USB
host capability.
2 ns/div to 50 s/div
Edge, pattern, pulse width, video
Edge, glitch, TV, nth edge
24.1 cm high x 13.8 cm wide x 6.6 cm deep
27 cm high x 18.3 cm wide x 6.5 cm deep
1.5 kg
< 2.5 kg
Up to 4 hours
Up to 3 hours
*Single channel operation
**Dual channel operation
www.agilent.com/find/1600family | 7
100 MHz and 200 MHz USB modular scopes
Engineered for versatility and portability without compromising performance
• Provides up to 1 GSa/s (interleaved) sampling and 32 Mpts of memory to
help
you gain better insight into signal details
• Advanced analysis capabilities built into the bundled AMM (Agilent
Measurement Manager) scope software include waveform math and FFT
with windowing
• Normal, averaging and peak-detect acquisition modes
• Advanced triggering including edge, pulse width and line-selectable video
8 | www.agilent.com/find/2700family
• Manual, auto and tracking cursors with T, V and frequency measurements
• Over 25 measurement and math functions
• 1,250-point FFT, Hamming, Blackman-Harris and rectangular windowing
• Dual-screen display with FFT function and keyboard shortcut keys (with AMM software)
• Provides flexibility of standalone or chassis-based operation for dual-play capability
Dual-play capability. Carry powerful test
equipment in your bag along with your laptop
PC, or use it with other instruments in a chassis.
Simplify waveform analysis with automatic
measurements such as rise time and duty cycle,
and the measurement results panel.
U2701A
Sample rate
U2702A
100 MHz
200 MHz
1 GSa/s, 500 MSa/s each channel, max
Channels
2
Memory
Up to 32 Mpts
Vertical resolution
8 bits
Vertical sensitivity
2 mV/div to 5V/div
Maximum input
CAT 1 30 Vrms, 42 Vpk
Input impedance
1 MΩ: ≈16 pF
Timebase range
Triggering
Dimensions
Weight
Capture signal details effectively with deep
memory.
Scope additions and enhancements
Models and specifications
Bandwidth
Explore frequency domain characteristics of
measured waveforms using FFT analysis (with
four windowing functions) and search for peak
values of the FFT.
Probes – Improve your measurement reliability with our complete
selection of probes:
• U2701A comes with the N2862B 10:1, 150 MHz passive probe;
U2702A comes with the N2863B 10:1, 300 MHz passive probe
• See the complete list of compatible probes on pages 34-35
Accessories – Don’t forget options that make measurements faster and
more convenient, such as the six-slot USB MI chassis, BNC cable and
USB secure cable.
1 ns/div to 50s/div
Edge, pulse width, TV
117.00 mm x 180.00 mm x 41.00 mm (with rubber bumper)
105.00 mm x 175.00 mm x 25.00 mm (without rubber bumper)
534 g (with rubber bumper)
482 g (without rubber bumper)
www.agilent.com/find/2700family | 9
70 MHz to 200 MHz economy oscilloscopes
Breakthrough technology delivers more scope for the same budget
• 8.5-inch WVGA display, with 50% more signal viewing than other scopes,
is the largest in this class
• 4 instruments in 1: oscilloscope, mixed-signal oscilloscope, WaveGen function generator, and
integrated digital voltmeter
• 50,000 waveforms per second update rate so you can see more of your
signal detail and infrequent anomalies more of the time
• First fully upgradable oscilloscope: bandwidth, MSO, WaveGen, and measurement applications
10 | www.agilent.com/find/2000xfamily
• Supports InfiniiView offline analysis software and Agilent Spectrum Visualizer for vector signal analysis
See more of your signal more of the time with
the largest screen in its class, the deepest
memory and the fastest waveform update rates.
Do more with the power of 4 instruments in 1:
oscilloscope, logic timing analyzer (optional),
integrated WaveGen arbitrary-function generator (optional), and integrated digital voltmeter
(optional).
Get more investment protection with this fully
upgradable scope, including bandwidth.
Scope additions and enhancements
Models and specifications
2002A
2004A
2014A
2 GS/s half channel, 1 GS/s full channel
DSOX
2
4
2
4
2
4
MSOX
2+16
4+16
2+16
4+16
2+16
4+16
100 kps
Display
8.5-inch high definition wide display
Waveform update rate
50,000 waveforms per second
Vertical resolution
Vertical sensitivity
Bandwidth limit
Maximum input voltage
Input impedance
Timebase range
Time scale accuracy
Probes – Improve your measurement reliability with our comprehensive
selection of probes:
• DSO/MSOX2002A, 2004A, 2012A and 2014A come with the N2862B
150 MHz passive probe, 10:1 attenuation
• DSO/MSOX2022A and 2024A come with the N2863B 300 MHz passive
probe, 10:1 attenuation
• See our complete list of compatible probes on pages 34-35
Accessories – Don’t forget options that make measurements faster and
more convenient, such as the VGA/LAN or GPIB modules, soft carrying
case, and rackmount kit.
8 bits
1 mV/div ~ 5 V/div
Approximately 20 MHz
CAT I 300 Vrms, 400 Vpk, CAT II 300 Vrms, 400 Vpk
1 M ± 2% (11 pF)
5 ns/div to 50 s/div
2 ns/div to 50 s/div
DSO-to-MSO upgrades – Protect your investment with the flexibility to
upgrade to an MSO at any point after purchase
Bandwidth – Increase bandwidth at any time
25 ppm ± 5 ppm per year
Edge, Pulse width, Pattern, Video
Connectivity
Standard USB Device x2, USB Host x 1 , Optional LAN, VGA, GPIB
Dimensions
381 mm W x 204 mm H x 141 mm D
Weight
2024A
200 MHz
Memory
Triggering
2022A
100 MHz
Sample rate
Channels
2012A
70 MHz
Bandwidth
Search and navigate front panel controls make it easy
to find and view specific signal activity quickly, play,
stop, rewind and fast forward through waveforms.
3.85 kg (8.5 lbs)
Applications – Expand your scope’s capabilities with our powerful lineup
of applications:
• Options include: WaveGen function generator, 3-digit voltmeter, mask
testing and segmented memory
• See our list of applications on pages 30-32
www.agilent.com/find/2000xfamily | 11
100 MHz to 1 GHz economy oscilloscopes
Breakthrough technology delivers more scope for the same budget
• 8.5-inch WVGA display, with 50% more signal viewing than most other scopes
in this class
• 5 instruments in 1: oscilloscope, mixed-signal oscilloscope, WaveGen function
generator, serial protocol analyzer, and integrated digital voltmeter
• 1,000,000 waveforms per second update rate so you can see more of your
signal detail and infrequent anomalies more of the time
• First fully upgradable oscilloscope: bandwidth, MSO, WaveGen, DVM, and
measurement applications
• Up to 4 Mpts gives you more memory so you can capture long, non-repeating
signals while maintaining a high sample rate
12 | www.agilent.com/find/3000xfamily
See more of your signal more of the time with
the largest screen in its class, the deepest
memory and the fastest waveform update rates.
Do more with the power of 5 instruments in 1:
oscilloscope, logic timing analyzer (optional),
integrated WaveGen arbitrary-function generator (optional), serial protocol analyzer, and
integrated digial voltmeter (optional).
Get more investment protection with the fully
upgradable scope, including bandwidth.
Models and specifications
3012A
3014A
3024A
3032A
200 MHz
3034A
3052A
350 MHz
3102A
1 GHz
DSOX
2
4
4
2
4
2
4
2
4
MSOX
2+16
4+16
4+16
2+16
4+16
2+16
4+16
2+16
4+16
Up to 4 Mpts, optional segment memory
Display
8.5-inch high definition wide display
Waveform update rate
1 million waveforms per second
Vertical resolution
8 bits
Vertical sensitivity
1 mV/div ~ 5 V/div
Bandwidth limit
CAT I 300 Vrms, 400 Vpk, CAT II 300 Vrms, 400 Vpk
Input impedance
Timebase range
Time scale accuracy
Selectable 1 M ± 1% (14 pF), 50 ± 1.5%
5 ns/div to 50 s/div
2 ns/div to 50 s/div
1 ns/div to 50 s/div
500 ps/div to 50 s/div
25 ppm ± 5 ppm per year
Edge, edge then edge (B trigger), pulse width, pattern, OR, rise/fall time, nth edge burst, runt,
setup & hold, video, enhanced video (HDTV), USB, ARINC429, CAN, FlexRay, I2C, I2S, LIN,
MIL-STD1553, SPI, UART/RS232/422/485
Connectivity
Standard USB Device x2, USB Host x 1 , Optional LAN, VGA, GPIB
Dimensions
38.1 cm W x 20.4 cm H x 14.1 cm D
3.85 kg (8.5 lbs)
Probes – Improve your measurement reliability with our comprehensive
selection of probes:
• DSO/MSOX3012A and 3014A come with the N2862B 150 MHz
passive probe, 10:1 attenuation
• DSO/MSOX3024A comes with the N2863B 300 MHz passive prove,
10:1 attenuation
• DSO/MSOX3032A, 3034A, 3052A and 3054A come with the N2890A
500 MHz passive probe, 10:1 attenuation
• See our complete list of compatible probes on pages 34-35
Accessories – Don’t forget options that make measurements faster and
more convenient, such as the VGA/LAN or GPIB modules, soft carrying
case, and rackmount kit.
Approximately 20 MHz
Maximum input voltage
Weight
3104A
5 GS/s (½), 2.5 GS/s (full)
Memory
Triggering
3054A
500 MHz
4 GS/s half channel, 2 GS/s full channel
Sample rate
Channels
Scope additions and enhancements
100 MHz
Bandwidth
Serial bus triggering and hardware-based
protocol decoding means you can efficiently
debug your embedded designs that include
serial bus communication.
DSO-to-MSO upgrades – Protect your investment with the flexibility to
upgrade to an MSO at any point after purchase
Bandwidth – Increase bandwidth at any time
Memory – Increase memory depth at any time
Applications – Expand your scope’s capabilities with our powerful lineup
of applications:
• Options include: WaveGen function generator, DVM, mask testing
and segmented memory I²C, SPI, CAN, LIN, RS232/UART, HDTV,
FlexRay, ARINC429, MILSTD1553 and I²S
• See our list of applications on pages 30-32
www.agilent.com/find/3000xfamily | 13
200 MHz to 1.5 GHz digital storage and mixed signal scopes
Oscilloscope “experience” redefined
• Industry-exclusive 12.1-inch capacitive touch display is the largest display in
this class of oscilloscopes
• Get 5 instruments in 1: oscilloscope, mixed-signal oscilloscope, serial protocol analyzer, WaveGen
dual-channel function/arbitrary generator, 3-digit voltmeter
• 1,000,000 waveforms per second update rate means you can see more of your
signal more of the time
• Full upgradable: bandwidth, MSO WaveGen, DVM and measurement applications
• Exclusive InfiniiScan Zone touch triggering simplifies complex triggering to a
touch of the screen
14 | www.agilent.com/find/4000xfamily
Experience the capacitive 12-inch touch
screen. Drag measurements, cursors and sidebar panels, for quick oscilloscope setup. Use
the alpha-numeric touch pad for dramatically
faster annotation.
Experience InfiniiScan Zone touch trigger.
Triggering never has been this easy before;
simply draw a box on your signal of interest for
instantaneous triggering.
Experience the Speed. Industry’s fastest
waveform update rate uncovers infrequent
anomalies others may miss.
Models and specifications
4022A
Scope additions and enhancements
4024A
4034A
4052A
350 MHz
4054A
500 MHz
1.5 GHz
• All DSO/MSO4000 X-models come with standard one per channel
N2894A 700-MHz passive probe (10:1 attenuation)
2
4
2
4
2
4
4
4
MSOX
2+16
4+16
2+16
4+16
2+16
4+16
4+16
4+16
Standard 4 Mpts, Standard segmented memory
Display
12.1-inch high definition capacitive touch display
Waveform update rate
1 mV/div ~ 5 V/div
Bandwidth limit
Input impedance
Timebase range
Time scale accuracy
Bandwidth & DSO-to-MSO upgrades – Protect your investment with
the flexibility to upgrade your bandwidth and MSO channels at any time
8 bits
Vertical sensitivity
Maximum input voltage
Accessories – Don’t forget options that make measurements faster and
more convenient, such as the rackmount kit and soft carrying case
1 million waveforms per second
Vertical resolution
Approximately 20 MHz
Applications – Expand your scope’s capabilities with our powerful lineup
of applications:
CAT I 300 Vrms, 400 Vpk, CAT II 300 Vrms, 400 Vpk
Selectable 1 M ± 1% (15 pF), 50 ± 1.5%
2 ns/div to 50 s/div
1 ns/div to 50 s/div
500 ps/div to 50 s/div
± 10 ppm
InfiniiScan Zone touch trigger, edge, edge then edge (B trigger), pulse width, pattern, OR,
rise/fall time, nth edge burst, runt, setup & hold, video, enhanced video (HDTV)*, USB 2.0*, ARINC429*,
CAN*, FlexRay*, I2C*, I2S*, LIN*, MIL-STD1553*, SPI*, UART/RS232/422/485*
Connectivity
Standard LAN, VGA, USB Device x3, USB Host x 1 , Optional GPIB
Dimensions
45.4 cm W x 29.8 cm H x 15.6 cm D
Weight
4154A
DSOX
Memory
Triggering
1 GHz
Probes – Improve your measurement reliability with our comprehensive
selection of probes. See complete list of compatible probes on pages 34-35
4104A
5 GS/s half channel, 2.5 GS/s full channel
Sample rate
Channels
4032A
200 MHz
Bandwidth
Experience the Integration. Save your bench
space and improve your measurement
efficiencies with built in protocol analyzer,
MSO, dual-channel WaveGen, and DVM.
• Integrated feature options: Dual-channel WaveGen, DVM, mask/limit
testing, education training kit
• General and serial protocol applications: MIL-STD 1553, ARINC 429,
USB 2.0 (low, full, and hi-speed), audio serial (I2S), CAN, LIN, FlexRay,
RS232, UART, I2C, SPI, Xilinx, FPGA dynamic probe, power analysis,
HDTV
6.3 kg (13.9 lbs)
*optional
www.agilent.com/find/4000xfamily | 15
100 MHz to 1 GHz digital storage and mixed signal scopes
Engineered for the best signal visibility
• Captures and compares analog, digital and serial signals
• Only high-performance 1U-high rack-mountable scope (6000L Series)
• 100,000 waveforms per second real-time update rate helps you catch the most elusive
glitches
• Serial bus trigger/decode options including I2C, SPI, CAN, LIN, I2S, RS-232/UART,
MIL-STD 1553 and FlexRay
• Only high-performance scope with battery-power option - enabling 2+ hours without line
power (6000A Series)
• DSO models upgradable to MSO whenever you need greater capabilities
16 | www.agilent.com/find/7000 and www.agilent.com/find/6000
• 3-year return-to-Agilent warranty to protect your investment
Fast. MegaZoom III technology delivers up to
100,000 waveform acquisitions per second so
the scope responds instantly and you won’t miss
infrequent events and critical signal detail.
Battery-power option. Make measurements
where line power isn’t available with an optional,
internal, rechargeable lithium ion battery.
Smart. Customize your scope with a wide range
of application packages that provide meaningful
insight into application-specific problems.
Models and specifications
Scope additions and enhancements
6000A/L Series
6012A
6014A/L
6032A
6034A
6052A
6054A/L
6102A
6104A/L
7000B Series
7012B
7014B
7032B
7034B
7052B
7054B
7102B
7104B
Bandwidth
200 MHz
Sample rate
Channels
350 MHz
500 MHz
2 GSa/s each channel
1 GHz
4 GSa/s half channel, 2 GSa/s full channel
DSOX
2
4
2
4
2
4
2
4
MSOX
2+16
4+16
2+16
4+16
2+16
4+16
2+16
4+16
Memory
Standard 8 Mpts, optical segmented memory
Display
XGA display (6000A: 6.3-inch, 7000B: 12-1-inch)
Waveform update rate
100,000 waveforms per second
8 bits
Vertical sensitivity
2 mV/div ~ 5 V/div (except 601xA: 1 mV/div ~ 5 mV/div)
Bandwidth limit
Approximately 20 MHz
Maximum input voltage
Timebase range
Time scale accuracy
Triggering
Connectivity
Battery operation
Dimensions
Weight
CAT I 300 Vrms, 400 Vpk, CAT II 300 Vrms, 400 Vpk
Selectable 1 MΩ ± 1% (14 pF), 50Ω ± 1.5% (except 601xA: 1 MΩ ± 1% (11pF) only)
5 ns/div to 50 s/div
2 ns/div to 50 s/div
1 ns/div to 50 s/div
Probes – Improve your measurement reliability with our comprehensive
selection of probes:
• 603xA, 605xA, 610xA, 703xB, 705xB and 710xB come with the
10073D 10:1, 500 MHz passive probe
• 601xA and 701xB come with the 10074D 10:1, 150 MHz passive probe
• See our complete list of compatible probes on pages 34-35
Accessories – Don’t forget options that make measurements faster and
more convenient, such as the hard transit case, scope cart, evaluation kit
and rackmount kit.
Vertical resolution
Input impedance
Also available in a compact, rack-mountable
design. The 6000L is 1U high and 19” wide to
save valuable rack space. Side and rear air vents
(no top or bottom air vents) let you mount other
instruments directly above or below. Rack mount
brackets and rack rails are standard with every
unit.
500 ps/div to 50 s/div
≤ ± (15+2* (instrument age in years)) ppm
Edge, pulse width, pattern, TV, duration, sequence, CAN, LIN, USB, I²C, SPI, RS-232,
Nth edge burst, MIL-STD 1553, FlexRay
Standard USB Host x2, USB Device x1, LAN, XGA output, GPIB (option 7000B)
Option - BAT (6000A Series only)
6000A: 354 mm wide x 188 mm high x 282 mm deep, 6000L: 435 mm wide x 42 mm high
x 270 mm deep, 7000B: 454 mm wide x 277 mm high x 173 mm deep
6000A: 4.9 kg (10.8 lbs), 6000L: 2.45 kg (5.4 lbs), 7000B: 5.9 kg (13 lbs)
Portable power – Consider the battery option for measurements on
the go (6000A Series).
DSO-to-MSO upgrades – Protect your investment with the flexibility to
upgrade to MSO after purchase.
Applications – Expand your scope’s capabilities with our powerful lineup
of applications:
• Options include I2C, SPI, CAN/LIN, RS-232, FPGA, FlexRay, I2S,
MIL-STD 1553, power, offline analysis, vector signal analysis, mask
testing and segmented memory
• See our complete list of applications on page 30-32
www.agilent.com/find/7000 and www.agilent.com/find/6000 | 17
600 MHz to 4 GHz digital storage and mixed signal scopes
Engineered for the broadest measurement capability
• The combination of powerful Infiniium scope features, the world’s fastest integrated MSO
and the first multi-tab protocol viewer allows you to quickly debug and test a wide variety of
designs, making it the best 3-in-1 instrument
• The large display, thin depth and light weight make using, sharing or moving the scope easy
• Get fast and accurate answers to technology-specific problems with the widest range of applications
• Provides bandwidth, memory, triggering and signal fidelity triggering for debugging, characterizing
and analyzing a wide variety of analog, serial, digital, and RF signals
• 15” XGA display, the largest in the industry, makes it easier to view analog, digital and serial signals
18 | www.agilent.com/find/9000family
Powerful Infiniium scope. Fast sample and
update rates let you see a precise representation
of your signal. Use responsive deep memory to
see longer periods of time.
Integrated mixed signal oscilloscope. With
sample rates of up to 20 GSa/s, you can see
critical timing relationships or use the 16 digital
channels to see data values. Or, use the digital
channels for protocol analysis. Trigger across the
industry’s largest range of time-correlated analog
and digital channel combinations.
Protocol analysis capability. Extend your scope
capability with protocol analysis. Trigger and
view packets at the protocol level and drill up or
down between the physical and protocol layers.
The tracking marker/bar shows precise time
alignment between protocol viewer and analog
waveforms.
Models and specifications
Scope additions and enhancements
DSO9064A MSO9064A DS09104A MSO9104A DSO9254A MSO9254A DSO9404A MSO9404A
600 MHz
Sample rate
5 GSa/s, 10 GSa/s on
2 channels
Memory
4
4+16 logic
4 GHz
2.5 GHz
1 GHz
Bandwidth
Channels
10 GSa/s, 20 GSa/s on 2 channels
4
4+16 logic
4
4+16 logic
4
4+16 logic
20 Mpts std. Optional up to 1 Gpts
Vertical resolution
8 bits ≥12 bits with averaging
Vertical sensitivity
1 MΩ: 1 mV/div to 5 V/div, 50 Ω: 1 mV/div to 1 V/div
Maximum input
1 MΩ:150V RMS or DC, CAT I ± 250 V (DC + AC) in AC coupling 50MΩ: 5 Vrms, CAT I
Input impedance
50 MΩ ± 2.5%, 1 MΩ ± 1% (13pF typical)
Timebase range
Timebase accuracy
Triggering
Dimensions
Weight
Sized to fit your environment. The Infiniium 9000
offers the largest display in the industry, with a
smaller depth and lighter weight than any other
scope in its class. It’s an engineering feat with a
20 layer board, 27 ASICs and three workhorse FPGAs designed to deliver maximum performance.
5 ps/div to 20 s/div
± (0.4 + 0.5 * YearsSinceCal) ppm pk
Edge, glitch, runt, timeout, pattern/pulse range, state, pulse width, line, window, setup and hold, video,
serial
Probes – Improve your measurement reliability with our comprehensive
selection of probes:
• All models come with four N2873A 10:1, 500 MHz miniature passive
probes and MSO models include a flying lead MSO cable set
• Check out the award-winning InfiniiMax probing system, new
N2750A Series InfiniiMode probes and the N2795A/96A singleended
active probes
• See our complete list of compatible probes on pages 34-35
Accessories – Don’t forget options that make measurements faster and
more consistent, such as the removable hard drive and rackmount kit.
Memory – Increase memory depth to 500 Mpts at any time.
42.4 cm W x31.8 cm H x 22.6 cm D
13.9 kg
Applications – Expand your scope’s capabilities with our powerful lineup
of applications:
• Compliance testing: USB 2.0, Ethernet, DDR 1/2/3, MIPI D-PHY
• Protocol analysis: I²C, SPI, CAN, RS-232/UART, USB, PCI Express,
JTAG, 8B/10B, MIPI D-PHY, SVID, DigRF
• Other: Jitter, InfiniiScan, FPGA debug, VSA, power, comm. mask
testing
• See our complete list of applications on pages 30-32
www.agilent.com/find/9000family | 19
2.5 GHz to 13 GHz high-performance real-time lab scopes
Engineered for superior signal integrity and measurement confidence
• Up to 13 GHz bandwidth and up to 40 GSa/s sample rate on four channels
• Industry’s most flexible compliance software with new user-defined application add-in capability
• 122,000 measurements per second give you amazing measurement update throughput
• Low noise for both the oscilloscope and its probing system
• Bandwidth upgradeable from 2.5 GHz to 13 GHz
• Industry leading MegaZoom ultra deep memory – 1 Gpts at 40 GSa/s on all four channels
• Industry’s largest selection of application software packages, including: USB,
PCI Express®, SATA, DDR, HDMI, and more
• Three level sequence triggering with InfiniiScan Plus trigger system
20 | www.agilent.com/find/90000family
Powerful signal capture. Acquire
25 ms of PCI Express Gen2 data at
40 GSa/s using 1 Gpts of memory to
capture your signal of interest.
Leading glitch trigger. Consistently
trigger on 200 ps single bit (one UI) of
PCI EXPRESS Gen2 using industry –
leading <250 ps glitch trigger.
“Measure all edges” mode. Make
more than 5 million measurements in
less than 1 minute using the “measure
all edges” mode and long memory to
increase your confidence in the measurement statistics.
Models and specifications
DSO and DSA
Bandwidth
Scope additions and enhancements
DSO/DSA90254A DSO/DSA90404A DSO/DSA90604A DSO/DSA90804A DSO/DSA91204A DSO/DSA91304A
2.5 GHz
Sample rate
Certified compliance testing. Use VSA
Industry’s deepest memory (1 Gpts).
Reveal low frequency jitter components (vector signal analysis software) and
DSA91204A for Certified Wireless USB
with deep memory.
compliance testing.
4 GHz
6 GHz
8 GHz
12 GHz
20 GSa/s
Channels
13 GHz
40 GSa/s
4 channels
Display
12.1” XGA touch screen
Display update rate
400,000 waveforms per second (in segmented memory mode)
Memory
20 Mpts standard, optional up to 1 Gpts (50 Mpts std. on DSA)
Vertical resolution
8 bits, ≥ 12 bits with averaging
Vertical sensitivity
1 mV/div to 1 V/div
Max input voltage
±5V
Input impedance
50 Ω, ±3%
Timebase range
5 ps/div to 20 s/div real-time
Time scale accuracy
Probes – Improve your measurement reliability with our comprehensive
selection of probes, including the award-winning InfiniiMax probing
system, new N2750A Series InfiniiMode probes and the N2795A/
N2796A/1157A/1158A single-ended active probes. See our complete list
of compatible probes on pages 34-35.
Accessories – Don’t forget options that make measurements faster and
more convenient, such as the rackmount kit, transit case and testmobile.
Memory – Increase memory depth at any time.
Bandwidth – Protect your investment with bandwidth upgrades after
purchase.
± (0.4 + 0.5 * YrsSinceCal) ppm pk
Triggering
3-level sequence hardware (2 levels) and InfiniiScan software trigger: edge, edge transition, edge then edge,
glitch, line, pulse width, runt, timeout, pattern/pulse range, state, setup/hold, window, HDTV, non-monotonic, measurement, and zone qualify
Typical noise floor
147 µVrms
186 µVrms
234 µVrms
283 µVrms
365 µVrms
Max data
transfer rate
22 MSa/s
Dimensions
43.2 cm wide x 28.3 cm high x 50.6cm deep
Weight
20 kg
Power
800 watts, max.
389 µVrms
Applications – Expand your scope’s capabilities with our powerful lineup
of applications:
• Analysis options include jitter and eye analysis, user defined function,
MATLAB, and many more
• Compliance options include DDR1, 2, and 3, PCI Express, HDMI,
DisplayPort, SATA, SAS, XAUI, USB and more
• Transport your scope application license from one Infiniium to
another with the application server license
• See our complete list of applications on pages 30-32
www.agilent.com/find/90000family | 21
13 GHz to 33 GHz high-performance real-time lab scopes
Engineered for 33 GHz true analog bandwidth that delivers
• The industry’s highest real-time scope measurement accuracy
• Lowest jitter measurement floor at 100 fs
• High true analog bandwidth at 33 GHz
• The industry’s first and only 30 GHz oscilloscope probing system
• Lowest oscilloscope noise floor of 2.04 mV at 50 mV/div
• Industry’s most comprehensive application-specific measurement software
22 | www.agilent.com/find/90000xfamily
Custom front end technology. The fastest real-time oscilloscope bandwidth
available is achieved directly through
the scope hardware, without the noise
and distortions introduced with boosting techniques used by other vendors.
Capture rise times as fast as 12.4 ps
with confidence.
User-defined application software
allows automated compliance testing
on proprietary buses. Quickly program
and automate any set of measurements
with an interface similar to Agilent
compliance test software while emerging test standards solidify. Applications
are available today for: MIPI M-PHY,
DDR4, GDDR5, and SAS 12G.
Lowest real-time scope jitter measurement floor. Your signal rise times are
more accurately depicted.
Models and specifications
X91304A
X91604A
X92004A
X92504A
X92804A
X93204A
Bandwidth
13 GHz
16 GHz
20 GHz
25 GHz
28 GHz
33 GHz
80 GSa/s on 2 channels, 40 GSa/s on 4 channels
Channels
4 channels
Display
12.1” XGA touch screen
Display update rate
>400,000 waveforms per second (in segmented memory mode)
Memory
20 Mpts standard, optional up to 2 Gpts (50 Mpts std. on DSA)
Vertical resolution
8 bits, ≥ 12 bits with averaging
Vertical sensitivity
1 mV/div to 1 V/div
Sample clock jitter
100 fs
Max input voltage
±5V
Input impedance
50 Ω, ±3%
Timebase range
Time scale accuracy
Triggering
Typical noise floor
Memory – Increase memory depth at any time.
Bandwidth – Protect your investment with bandwidth upgrades after
purchase.
2 ps/div to 20 s/div real-time
3-level sequence hardware (2 levels) and InfiniiScan software trigger: edge, edge transition, edge then edge,
glitch, line, pulse width, runt, timeout, pattern/pulse range, state, setup/hold, window, HDTV, non-monotonic, measurement, and zone qualify
1.53
Probes – Improve your measurement reliability with our comprehensive
selection of probes, including the industry’s first 30 GHz InfiniiMax III
probing system. See our complete list of compatible probes on pages
34-35.
Accessories – Don’t forget options that make measurements faster and
more convenient, such as the rackmount kit and transit case.
± 0.1 ppm (immediately after calibration), ± 0.1 ppm/year (aging)
1.34
Certified compliance testing. Use one
of the many available compliance application software packages, for standards
such as USB 3.0, to test.
Scope additions and enhancements
DSO and DSA
Sample rate
Quickly characterize and compensate
the frequency response. PrecisionProbe
uses its 200 GHz indium phosphide
process to create a fast edge for characterization.
1.76
1.862
Max data
transfer rate
22 MSa/s
Dimensions
10.5”x16.75”x18.7” (27cm x 43cm x 48cm)
Weight
45.1 lbs (20.5 kg)
Power
100 - 240 VAC at 50/60 Hz; maximum input power 800 Watts
2.03
Applications – Expand your scope’s capabilities with our powerful lineup
of applications:
• Analysis options include jitter and eye analysis, user defined function,
MATLAB, and many more
• Compliance options include, DDR1,2 and 3, PCI Express, HDMI,
DisplayPort, SATA, SAS, MIPI D-PHY, and USB 3.0
• Transport your scope application license from one Infiniium to
another with the application server license
• See our complete list of applications on page 30-32
www.agilent.com/find/90000xfamily | 23
20 GHz to 63 GHz high-performance real-time lab scopes
Achieve your real edge with 63 GHz on 2 channels and 33 GHz on 4 channels
• The industry’s highest real-time bandwidth in a single frame with 63 GHz
• The industry’s lowest noise and jitter measurement floor
• The industry’s highest 4-channel bandwidth with 33 GHz in a single frame
• The industry’s deepest memory
24 | www.agilent.com/find/90000q-series
The 90000 Q-Series is fully compatible with
Agilent’s 89600 VSA software. It allows you to
see the “why” with advanced troubleshooting
tools including high-resolution FFT-based
spectrum measurements, time-domain tools,
and bit-level modulation analysis, all using 63
GHz of real time bandwidth.
Combine the 90000 Q-Series with Agilent’s
N4391A software for the most advanced and
complex modulation measurements. As your
designs move from 100 GbE to 400 GbE and
eventually 1 TbE, the 90000 Q-Series is uniquely
positioned to give you the most comprehensive
modulation suite.
Not only will the 90000 Q-Series take spectrum
and complex modulation measurements, but
by using PrecisionProbe advanced, you can get
full S21 characterization of cables up to 65 GHz.
The simple network analysis saves you time and
improves measurement accuracy by automatically
compensating for both magnitude and phase loss
caused by cables.
Models and specifications
DSO and DSA
Bandwidth
Scope additions and enhancements
X92004Q
X92504Q
X93304Q
X95004Q
X96204Q
20 GHz
25 GHz
33 GHz
50 GHz
63 GHz
Sample rate
160 GSa/s on 2 channels, 80 GSa/s on 4 channels
Channels
4 channels
Display
15.4’’ color XGA TFT-LCD with touch screen
Display update rate
>400,000 waveforms per second (in segmented memory mode)
Memory
20 Mpts standard, optional up to 2 Gpts (50 Mpts std. on DSA)
Vertical resolution
8 bits, ≥ 12 bits with averaging
Vertical sensitivity
1 mV/div to 1 V/div
Max input voltage
±5V
Input impedance
50 Ω, ±3%
Timebase range
2 ps/div to 20 s/div real-time
Time scale accuracy
Triggering
Typical noise floor
Sample clock jitter
Dimensions
Memory – Increase memory depth at any time.
Bandwidth – Protect your investment with bandwidth upgrades after
purchase.
± 0.1 ppm (immediately after calibration), ± 0.1 ppm/year (aging)
0.45%
0.54%
Probes – Improve your measurement reliability with our comprehensive
selection of probes, including the industry’s first 30 GHz InfiniiMax III
probing system. See our complete list of compatible probes on page
34-35.
Accessories – Don’t forget options that make measurements faster and
more convenient, such as the rackmount kit and transit case.
3-level sequence hardware (2 levels) and InfiniiScan software trigger: edge, edge transition, edge then edge,
glitch, line, pulse width, runt, timeout, pattern/pulse range, state, setup/hold, window, HDTV, non-monotonic, measurement, and zone qualify
0.39%
The 90000 Q-Series gives you deep insight into
your digital designs. EZJIT Plus features two
methods to properly separate the jitter into
random and deterministic components. If you
have bounded uncorrelated jitter, simply use
Agilent’s new tail-fit algorithm, otherwise
Agilent’s spectral method and 75fs of sample
clock jitter ensure the most accurate
measurement.
0.75%
75 fS
20” wide, 13.3” tall, and 19.4” deep
Weight
71 lbs (32.20 kg)
Power
100 - 240 VAC at 50/60 Hz; maximum input power 1200 Watts
0.83%
Applications – Expand your scope’s capabilities with our powerful lineup
of applications:
• Analysis options include jitter and eye analysis, user defined function,
MATLAB, and many more
• Compliance options include, DDR1, 2 and 3, PCI Express, HDMI,
DisplayPort, SATA, SAS, MIPI D-PHY, and USB 3.0
• Transport your scope application license from one Infiniium to
another with the application server license
• See our list of applications on page 30-32
www.agilent.com/find/90000q-series | 25
DC to > 90 GHz wideband sampling scope
Engineered for precise, accurate high-speed electrical and optical analysis
• Four powerful instruments in one unit: High-bandwidth scope, digital communications
analyzer, time domain reflectometer and jitter analyzer
• Wide bandwidth with the lowest residual jitter and noise for the highest precision
waveforms
• The industry standard for analysis of optical communication signals
• Calibrated reference receivers for optical transceiver compliance test
26 | www.agilent.com/find/DCA-Xfamily
• Modular platform allows optical, electrical, TDR/TDT, and S-parameter measurements
• Advanced jitter and amplitude analysis at the push of a button
• Jitter spectrum, phase noise, and jitter transfer measurements on both electrical and
optical signals
• Integrated de-embedding, embedding and equalization capability
• Up to 16 electrical or 8 optical channels per mainframe
Full-function oscilloscope. Bandwidth of 65 GHz
optical and > 90 GHz electrical ensures the most
accurate waveform measurements.
Eye diagram analysis. Fast and accurate
transmitter characterization using eye diagram
analysis and automated mask margin measurements.
Advanced jitter and amplitude analysis. Accurate
decomposition of jitter and amplitude impairments
provides compliant total jitter (TJ) results and
insight into root cause of eye closure.
Time domain reflectometer. Measure both
impedance and S-parameters and verify
transmission quality on cables, components
and channels.
Models matching your applications
Scope additions and enhancements
86100D Infiniium DCA-X mainframe
Probes – Improve your measurement reliability with our comprehensive
selection of probes.
Electrical 1 to 14.2 Gb/s
Highest precision view of serial bus waveforms
86112A
Dual channel electrical > 20 GHz
83496B
Electrical clock recovery (and PLL analysis)
86108B
Dual 35 GHz channels, jitter < 50 fs, internal clock recovery
Electrical 10 to > 43 Gb/s Electrical signals for 40/100G Ethernet, SONET/SDH
86118A
Dual remote heads 70 GHz
86107A
Precision timebase (jitter < 100 fs)
86108B
Dual 50 GHz channels, jitter < 50 fs, internal CR to 32 Gb/s
86117A
Dual channel electrical > 50 GHz
N1045A
Dual/Quad 60 GHz channels, remote heads
Optical 1 to 14.2 Gb/s
9 GHz optical channel, 20 GHz electrical channel
83496B
Optical clock recovery (single-mode and multimode)
86105D
20 GHz optical channel, 35 GHz electrical channel
86115D
20 GHz optical, multi-channel
40/100G Ethernet, SONET/SDH
86116C
65 GHz optical channel, 90 GHz electrical channel
86107A
Precision timebase (jitter < 100 fs)
TDR
Modules – Choose from an extensive list of optical, electrical, TDR/TDT,
dual/quad electric channel, trigger and clock recovery modules.
Fibre Channel, Ethernet, SONET/SDH, PON
86105C
Optical 10 to > 43 Gb/s
Options – Mainframe options include an enhanced trigger, GPIB interface,
removable hard drive and signal processing capabilities such as equalization, de-embedding and embedding of waveforms.
Serial bus standards – PCIe, SATA, SAS, USB, S-parameters
54754A
Differential TDR, dual 18 GHz channels
www.agilent.com/find/DCA-Xfamily | 27
Applications:
Engineered to turn measurements into answers
You need more than data from your scope – you want fast, accurate
answers to your questions.
Take advantage of the expertise Agilent gains by participating in key
industry standards bodies.
Many scopes can churn out reams of data. But when you’re looking for meaning-
Our engineers sit on the board of directors of many standards groups, including
ful insight into designs under development, Agilent offers the broadest selection
the JEDEC Solid State Technology Association, the Video Electronics Standards
of oscilloscope solutions in the industry.
Association (VESA) and the Peripheral Component Interconnect Special Interest
Group (PCI-SIG). We help define the test standards so we can give you consistent
We deliver more than 80 powerful applications packages for debug,
analysis, compliance and characterization.
measurement results and support you as you deploy these emerging technologies
for your success.
Whether you’re debugging low-speed serial bus operation or FPGA functionality;
focused on signal integrity; or ensuring compliance to industry standards, Agilent
has solutions to help you get to accurate answers more quickly.
Make your job simpler with automated setups and one-button
compliance testing for more than 25 applications.
The PCI Express® electrical performance
validation and compliance software lets you test
devices to ensure compliance with the PCIe 1.1
and PCIe 2.0 electrical specs for add-in cards and
motherboards.
We make using our solutions easy so busy engineers can offload tedious
Speed debug as you deploy FPGAs or debug serial bus designs with our
innovative solutions.
characterization and still get accurate results. A test setup wizard guides you
Our integrated mixed-signal oscilloscope technology allows us to offer unique
And the results reports include configuration, measurements made, pass/fail
solutions like our FPGA dynamic probe to let you see inside your FPGA for faster
status, margin analysis and waveforms.
debug. And our protocol level triggers and displays help you resolve the physical
layer root cause of issues you discover at the protocol level.
through selection, configuration, connection, execution and results reporting.
We also offer user-definable application software that allows automated
measurements for compliance testing on proprietary buses or while emerging test
standards solidify.
28 | www.agilent.com/find/appsfamily
The USB 2.0 compliance test software
makes USB signal integrity testing as
simple as capturing the signals with your
scope, eliminating the need to transfer
waveforms to your PC.
Oscilloscope Compliance and Characterization Solutions
Industry
Model number
Oscilloscope
Standards organization
10 Gb attachment unit interface (XAUI)
Wireline
N5431A
90000, 90000X Series
www.ieee802.org/3/ and www.ethernetalliance.org
10 Gb BaseT Ethernet
Wireline
U7236A
90000 Series
www.ethernetalliance.org
DDR1 and LPDDR1
Computing and memory
U7233A
9000, 90000, 90000X Series
www.jedec.org
DDR2 and LPDDR2
Computing and memory
N5413B
9000, 90000, 90000X Series
www.jedec.org
DDR4
Computing and memory
N6462A
9000, 90000 Series
www.jedec.org
DisplayPort
Media
U7232B
9000A, 90000X, 90000Q Series
www.displayport.org
DVI
Media
N5394A
90000 Series
www.ddwg.org
Ethernet 1000/100/10BASE-T
Wireline
N5392A
9000, 90000 Series
www.ieee802.org/3/ and www.ethernetalliance.org
Fully buffered DIMM
Computing and memory
N5409A
90000 Series
www.jedec.org
GDDR5
Computing and memory
U7245A
90000, 90000X Series
www.jedec.org
HDMI 1.4
Media
N5399B
90000, 90000X Series
www.hdmi.org
HSIC
Consumer electronics
U7248A
9000, 90000 Series
MHL
Consumer electronics
N6460A
90000A, 90000X, 90000Q Series
MIPI D-PHY
Consumer electronics
U7238A
9000, 90000, 90000X Series
www.mipi.org
MIPI M-PHY
Consumer electronics
U7249A
9000, 90000 Series
www.mipi.org
PCI EXPRESS gen 1/2
Computing and memory
N5393A/B
90000, 90000X Series
www.pcisig.org
SD UHS-1
Storage
U7246A
9000, 90000, 90000X Series
www.sdcard.org
SD UHS-II
Storage
N6461A
90000 Series
www.sdcard.org
Serial ATA I/II/III
Storage
N5411B
90000, 90000X Series
www.sata-io.org
Serial attached SCSI (SAS)
Storage
N5412B
90000, 90000X Series
www.scsita.org
Thunderbolt
Consumer electronics
N6463A
90000X Series
www.thunderbolttechnology.net
USB 2.0
Consumer electronics
N5416A
9000, 90000 Series
www.usb.org
USB 3.0
Consumer electronics
U7243A
90000, 90000X Series
www.usb.org
HDMI validation and compliance software gives
you a fast way to verify and debug designs for
set-top boxes, digital video recorders, DVD
players, entertainment systems and motherboards.
The DDR2 compliance test application
provides a fast and easy way to test, debug
and characterize your DDR2 designs and
includes crucial measurements, such as
eye-diagram, mask testing and ringing.
www.agilent.com/find/appsfamily | 29
Oscilloscope Software Applications
Model number
Oscilloscope solutions
64b/66b 10Gbase-KR Ethernet decode
N8815A
90000A, 90000X Series
Advanced EYE analysis
86100DU-401
86100D Series
Advanced math measurement
DSOX3ADVMATH
DSOX 3000, MSOX 3000 Series
Automotive serial data analysis
N5402A
90000, 90000X Series
BenchLink waveform builder pro and basic
33503A
4000X Series
Built-in function and arbitrary waveform generator
DSOX2WAVEGEN, DSOX3WAVEGEN
2000X, 3000X Series
Calibration pulse generator
N2806A
9000, 90000 Series
CAN/LIN trigger and decode
DSOX3AUTO, DSOX4AUTO, N5424A, N8803A, and N8803B
3000X, 4000X, 6000, 7000, 9000, 90000, 90000X Series
Communication mask test kit
E2625A
9000, 90000 Series
DDR3 and LPDDR3 compliance test application
U7231B
9000, 90000 Series
DDR4 compliance test application
N6462A
9000, 90000 Series
DisplayPort 1.2 compliance and validation test
U7232B
90000, 90000X Series
Dual-channel 20-MHz function & arbitrary waveform generator DSOX4WAVEGEN2
4000X Series
Educators Training Kit
DSOXEDK
2000X, 3000X, 4000X Series
EZJIT and EZJIT Plus jitter analysis
N8813A, E2681A, and N5400A
9000, 90000, 90000A, 90000Q, 90000X Series
FlexDCA
N1010A
86100 Series
FlexRay
N5432A , N8803B
6000, 7000, 9000 Series
FlexRay triggering and decode
DSOX3FLEX, DSOX4FLEX, and N5432C
3000X, 4000X,6000, 7000 Series
FPGA dynamic probe - Xilinx
DSOX4FPGAX, N5406A, and N5397A
4000X, 6000, 7000, 9000 Series
High-speed serial data analysis and clock recovery
E2688A and N5384A
9000, 90000, 90000X Series
HSIC triggering and decode
N5464B and N5464A
9000, 90000, 90000X Series
I²C/SPI serial decode
DSOX3EMBD, DSOX4EMBD, N5423A , N5391A, and N5391B
3000X, 4000X, 6000, 7000, 9000, 90000, 90000X Series
30 | www.agilent.com/find/appsfamily
CAN/LIN triggering and hardware-accelerated
decode helps you quickly find and debug errors
and signal integrity problems on CAN and LIN
serial buses.
View and analyze waveforms anywhere
your PC goes. InfiniiView includes powerful
viewing and analysis tools based on Agilent’s Infiniium scope user interface.
Oscilloscope Software Applications
Model number
Oscilloscope solutions
I2S triggering and decode
DSOX3AUDIO, DSOX4AUDIO, and N5468A
3000X, 4000X, 6000, 7000 Series
InfiniiScan
N5414B and N5415B
9000, 90000, 90000X Series
InfiniiSim waveform transformation
N5465A , 86100D-SIM, and N1010A-SIM
9000, 90000, 90000X, 86100 Series
Infiniium user-defined function
N5430A
9000, 90000, 90000X Series
InfiniiView analysis
N8900A
2000X, 3000X, 4000X, 5000, 6000, 7000, 9000 , 90000A, 90000X, 90000Q Series
Integrated digital voltmeter
DSOXDVM
2000X, 3000X, 4000X Series
Jitter and amplitude analysis
86100D-200/300
86100 Series
JTAG triggering and decode
N8817A
9000, 90000, 90000X Series
Mask/waveform limit testing
DSOX2MASK, DSOX3MASK, DSOX4MASK, and N5455A
2000X, 3000X, 4000X, 6000, 7000 Series (standard on Infiniium Series)
MATLAB data analysis
Option-061 or -062
6000, 7000, 9000, 90000, 90000X, 86100 Series
MILSTD 1553 serial triggering and analysis
DSOX3AERO, DSOX4AERO, and N5469A
3000X, 4000X, 6000, 7000 Series
MIPI DigRF v4 (M-PHY) triggering and decode
N8807A
9000, 90000 Series
MIPI D-Phy triggering and decode
N8802A
9000, 90000, 90000X Series
MIPI LLI (M-PHY) triggering and decode
N8809A
9000, 90000 Series
MIPI M-PHY compliance test software
U7249A
9000, 90000 Series
MIPI UniPro (M-PHY) triggering and decode
N8808A
9000, 90000 Series
Mobile high definition link source compliance test software
N6460A
90000A Series
OIF CEI 3.0 compliance test application
N1012A
86100D DCA-X Series
Offline PC-based analysis of acquired data
B4610A
2000X, 3000X, 6000, 7000 Series
PCI Express protocol viewer
N8816A
90000 Series
PCI Express triggering and decode
N5463B and N5463A
9000, 90000X Series
Phase locked loop and jitter spectrum measurement software
86100DU-400
86100D Series
Mask/waveform limit testing provides a fast
and easy way to test your signals to specified
standards, and uncover unexpected signal
anomalies, such as glitches.
USB serial trigger and decode provides
powerful time-correlated views of waveforms and symbols to the bit level, making
it easy to isolate communication faults to
logic or analog sources.
www.agilent.com/find/appsfamily | 31
Oscilloscope Software Applications
Model number
Oscilloscope solutions
Power measurement and analysis
DSOX3PWR, DSOX4PWR, U1881A, and U1882A
3000X, 4000X, 6000, 7000, 9000 Series
PrecisonProbe
N2807A, N2808A, N2809A
9000, 90000X, 90000A, 90000Q Series
RS-232/UART triggering and decode
DSOX3COMP, DSOX4COMP, N5457A , N5464A, and N5462B
2000X, 3000X, 4000X, 6000, 7000, 90000, 90000X Series
SATA triggering and decode
N8801A
9000, 90000, 90000X Series
SD UHS-II card compliance test software application
N6461A
90000 Series
Segmented memory
DSOX2SGM, DSOX3SGM, and N5454A
2000X, 3000X 6000, 7000 Series (standard on Infiniium Series)
Serial data analysis
E2688A and N5384A
90000 9000, 90000, 90000X Series
Serial data equalization
N5461A
9000, 90000 , 90000X Series
Signal analyzer
W2650A
9000, 90000X, 90000A Series
S-parameter measurements
86100D-202
86100D Series
Spectrum visualizer
64997A, 64996A
2000, 3000X, 4000X, 9000, 90000, 90000X Series
SVID triggering and decode
N8812A and N8900A
9000, 90000 Series
TDR/TDT measurements
86100D and 54754A
86100 Series
USB 2.0 full/low speed serial decode and triggering
DSOX4USBFL
4000X Series
USB 2.0 high-speed serial decode and triggering
DSOX4USBH
4000X Series
USB 2.0 triggering and decode
N5464B and N5464A
9000, 90000, 90000X Series
USB 3.0 triggering and decode
N8805A
90000, 90000X Series
User-definable application
N1019A and N5467A
86100D, 9000, 90000, 90000X Series
User-definable function
N8806A and N5430A
9000, 90000, 90000X ,90000A Series
Vector signal analysis
89601A and 89601B (Ver. 15 and higher only)
4000X, 6000, 7000, 9000, 90000, 90000X Series
Video triggering and analysis
DSOX3VID and DSOX4VID
3000X and 4000X Series
32 | www.agilent.com/find/appsfamily
Probes & Accessories:
Engineered for signal access and measurement accuracy
To get top performance from your scope, you need the right probe for
InfiniiMax Series
your application.
These specialized active probes complement the Infiniium Series scopes.
Selecting the best probe for the job ensures you can access your signals and
The InfiniiMax III Series is the first 30 GHz probing system and gives you the
make reliable measurements. To complement the scopes we sell, Agilent of-
industry’s flattest frequency response and widest selection of probe heads
fers a broad family of probes and accessories. Solutions range from simple,
and accessories. With capabilities such as 30 GHz bandwidth for differential
inexpensive passive probes to state-of-the-art high-frequency interposers
measurements and bandwidth upgradability to higher performance as your
that meet your toughest probing challenges.
needs evolve, the award-winning InfiniiMax probe system combines maximum
performance with excellent usability.
Passive probes
When you need to measure high voltages, these are the most durable and
Current probes
economical probes and the most widely used.
These probes sense the current flowing through a conductor and convert it
to a voltage that can be viewed and measured on your scope. Agilent’s cur-
Active probes
rent probes use a hybrid technology that includes a hall effect sensor, which
These single-ended or differential probes handle higher bandwidths with
senses the dc current and a current transformer, which senses the ac current,
lower signal loading. Single-ended active probes provide the best overall
making it unnecessary to make an electrical connection to the circuit.
InfiniiMax, the world’s best high-speed probing
system, offers you the highest performance available
for measuring differential and single-ended signals,
with flexible connectivity solutions for today’s highdensity ICs and circuit boards.
combination of resistive and capacitive loading. With low loading, singleended probes can be used on high-impedance, high-frequency circuits that
Innovative probe accessories make connections a snap.
would be overloaded with passive probes. Differential active probes are used
Connecting to components like fine-pitch devices, surface-mount integrated
to look at signals referenced to each other and also at small signals in the
circuits and DDR ball-grid arrays can be challenging. We take the challenge
presence of large DC offsets or other common-mode signals, such as power
away with accessories that let you connect easily – even hands-free.
line noise.
New N2750A Series probes come with new
InfiniiMode technology. InfiniiMode allows convenient
measurements of differential, single-ended and
common-mode signals with a single probe tip without
reconnecting the probe to change the connection.
www.agilent.com/find/probesfamily | 33
Recommended probes and accessories for Agilent oscilloscopes
U1600 Series
Scope bandwidth
20-200 MHz
Probe interface
BNC
Passive probe 1:1
U1560A
Passive probe 10:1
U1561A
High-voltage passive probe 100:1
U1562A
U2700 Series
1000 Series
2000 X-Series
60 - 200 MHz
70-200 MHz
100 MHz - 1 GHz
200 MHz - 1.5 GHz
BNC
BNC
AutoProbe lite
AutoProbe
10074D, N2871A,
N2872A
N2862B, N2863B
N2862B, N2863B
N2862B, N2863B,
N2890A
N2894A
N2874A, N2876A
N2874A (10:1), N2876A (100:1)
N2795A
N2795A/96A or 1130A*
N2750A, 1130A5
N2750A, 1130A5
200 MHz
10070D
N2870A, 10070D
10076B
N2771B
Low Z
Active single-ended probe
Active differential probe (high speed)
Active differential probe (high voltage)
U1583B
Rackmount kit
Carrying case
4000 X-Series
BNC
100 MHz
High-voltage passive probe 1000:1
Current probe
3000 X-Series
U1591A
N2791A, N2891A
N2791A, N2891A
N2791A, N2891A
N2790A/91A/ 92A/93A,
N2891A
N2790A/91A/92A/93A,
N2891A
1146A, N2893A, N2780B,
N2781B, N2782B,
N2783B
1146A,
N2780B/81A/82A/83A3
1146A,
N2780B/81A/82A/83A3
1146A, 1147B, N2893A
N2780B/81A/82A/83A3
1146A, 1147B, N2893A,
N2780B/81A/82A/83A3
N2739A
N6456A
N6456A
N2738A
N6457A
N6457A
N2763A
N2733A
Notes:
* Needs SE probe accessory
1. Requires 1142A power supply
2. Order one or more InfiniiMax III probe heads -- N5445A, N5439A, N5444A or N5441A.
3. Requires N2779A power supply
4. Includes one 10073D passive probe
5. Order one or more InfiniiMax I probe heads or connectivity kits per amplifier. a. E2669A InfiniiMax connectivity kit for differential/single-ended measurements, b. E2668A InfiniiMax connectivity kit for single-ended measurements,
c. E2675A InfiniiMax differential browser probe head and accessories, d. E2676A InfiniiMax single-ended browser probe head and accessories, e. E2677A InfiniiMax differential solder-in probe head and accessories, f. E2678A InfiniiMax single-ended/differential socketed
probe head and accessories, g. E2679A InfiniiMax single-ended solder-in probe head and accessories, h. E2695A Differential SMA probe head
6. Order one or more 10073D InfiniiMax II probe heads or connectivity kits per amplifier. a. N5380A InfiniiMax II 12 GHz differential SMA adapter, b. N5381A InfiniiMax II differential solder-in probe head and accessories, c. N5382A InfiniiMax II 12 GHz differential browser,
d. N5425A InfiniiMax I and II 12 GHz differential solder-in ZIF probe head. Requires N5426A or N5451Ae. N5426A InfiniiMax I and II 12 GHz ZIF tip, f. N5451A InfiniiMax I and II 9 GHz/5 GHz Long wire ZIF tip.
To see our entire portfolio of award-winning probes, see the probe catalog at www.agilent.com/find/Agilentprobes.
34 | www.agilent.com/find/probesfamily
Recommended probes and accessories for Agilent oscilloscopes
6000/7000 Series
Scope bandwidth
Probe interface
Carrying case
16 GHz - 32 GHz
20 GHz - 63 GHz
AutoProbe II
AutoProbe II
AutoProbe
10070D
10074D,
N2871A
10073D,
N2873A
10076B
AutoProbe
4
N2870A
10070D with E2697A
N2870A, 10070D with N5449A
N2870A, 10070D with N5449A
N2873A (10:1),
N2875A (20:1)
54006A (6GHz), 10073D
or N2873A (500MHz) with
E2697A4
N2873A with N5449A
N2873A with N5449A
10076B
10076B with E2697A
10076B with N5449A
10076B with N5449A
N2771B
N2771B with E2697A
N2874A (10:1), N2876A (100:1)
1144A1
Active differential probe (high speed)
Rackmount kit
2.5 GHz - 13 GHz
1 GHz - 4 GHz
AutoProbe Lite
Low Z
Current probe
90000 Q-Series
300 MHz-1 GHz
High-voltage passive probe 1000:1
Active differential probe (high voltage)
90000 X-Series
BNC
High-voltage passive probe 100:1
Active single-ended probe
90000A Series
100 MHz
Passive probe 1:1
Passive probe 10:1
9000 Series
N2791A/
N2891A
1146A,
N2780B/81A
/82A/83A3
N2916B
N2771B with N5449A
N2771B with N5449A
N2874A, N2876A with N5442A
N2874A, N2876A with N5442A
N2795A/96A
or 1130A*
N2795A/96A,
1130A*
N2795A/96A, 1157/8A,
1131/2/45
N2795A,96A,1157A/58A with
N5442A
N2795A,96A,1157A/58A with
N5442A
1130A5
or 1141A1
N2750A/51A/52A,
1130A5
N2751A/52A, 1131/2/45 or 1168/69A6
with differential probe accessory
N2800A/01A/02A/03A2
N2800A/01A/02A/03A2
N2790A/91A/
92A/93A, N2891A
N2795A/96A
1130A*
N2791A, N2790A with E2697A4
N2790A,91A,891A with N5449A or
N2792A,93A with N5442A
N2790A,91A,891A with N5449A or
N2792A,93A with N5442A
1146A, N2780B/81A/82A/83A3 with
E2697A4
1147B, N2893A with N5449A
1147B, N2893A with N5449A
1146A, 1147B, N2893A,
N2780B/81A/82A/83A3
N2732A
N2917B (hard) or N2733A (soft)
N2902A
N5475A
N5470A
N5470A
N2759A
N2748A
Notes:
* Needs SE probe accessory
1. Requires 1142A power supply
2. Order one or more InfiniiMax III probe heads -- N5445A, N5439A, N5444A or N5441A.
3. Requires N2779A power supply
4. Includes one 10073D passive probe
5. Order one or more InfiniiMax I probe heads or connectivity kits per amplifier. a. E2669A InfiniiMax connectivity kit for differential/single-ended measurements, b. E2668A InfiniiMax connectivity kit for single-ended measurements,
c. E2675A InfiniiMax differential browser probe head and accessories, d. E2676A InfiniiMax single-ended browser probe head and accessories, e. E2677A InfiniiMax differential solder-in probe head and accessories, f. E2678A InfiniiMax single-ended/differential socketed
probe head and accessories, g. E2679A InfiniiMax single-ended solder-in probe head and accessories, h. E2695A Differential SMA probe head
6. Order one or more 10073D InfiniiMax II probe heads or connectivity kits per amplifier. a. N5380A InfiniiMax II 12 GHz differential SMA adapter, b. N5381A InfiniiMax II differential solder-in probe head and accessories, c. N5382A InfiniiMax II 12 GHz differential browser,
d. N5425A InfiniiMax I and II 12 GHz differential solder-in ZIF probe head. Requires N5426A or N5451Ae. N5426A InfiniiMax I and II 12 GHz ZIF tip, f. N5451A InfiniiMax I and II 9 GHz/5 GHz Long wire ZIF tip.
To see our entire portfolio of award-winning probes, see the probe catalog at www.agilent.com/find/Agilentprobes.
www.agilent.com/find/probesfamily | 35
www.agilent.com/find/scopefamily
For more information on Agilent Technologies’
products, applications or services, please contact
your local Agilent office. The complete list is
available at:
www.agilent.com/find/contactus
Microsoft is a US registered trademark of Microsoft Corp
Windows is a US registered trademark of Microsoft Corp.
PCI Express is a registered trademark of PCI-SIG.
MATLAB is a US registered trademark of The Math Works, Inc.
Product specifications and descriptions
in this document subject to change
without notice.
© Agilent Technologies, Inc. 2012
Printed in USA, November 1, 2012
5989-7650EN
Phone
Europe
Americas
Belgium
Denmark
Finland
France
Canada
Brazil
Mexico
United States
(877) 894-4414
(11) 4197 3600
01800 5064 800
(800) 829-4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP countries
1 800 629 485
800 810 0189
800 938 693
1 800 112 929
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 375 8100
Germany
Ireland
Israel
Italy
Netherlands
Spain
Sweden
United Kingdom
32 (0) 2 404 93 40
45 45 80 12 15
358 (0) 10 855 2100
0825 010 700*
(0.125 /minute)
49 (0) 7031 464 6333
1890 924 204
972-3-9288-504/544
39 02 92 60 8484
31 (0) 20 547 2111
34 (91) 631 3300
0200-88 22 55
44 (0) 118 927 6201
Other unlisted countries:
www.agilent.com/find/contactus