USER’S MANUAL
AIR-CONDITIONER
ENGLISH
SRRM25ZE/ZF-S
SRRM35ZE/ZF-S
SRRM50ZE/ZF-S
SRRM60ZE/ZF-S
This air conditioner complies with EMC Directive 89/336/EEC, LV
Directive 73/23/EEC.
AIR-CONDITIONING & REFRIGERATION SYSTEMS HEADQUARTERS
16-5, 2-Chome, Kounan, Minato-ku, Tokyo, 108-8215, Japan
Fax: (03) 6716-5926
MITSUBISHI HEAVY INDUSTRIES EUROPE, LTD.
AIR-CONDITIONER DIVISION
3rd Floor Thavies Inn House 3-4 Holborn Circus London EC1N 2HA, ENGLAND
Phone: 44(0)20 7842 8171
Fax: 44(0)20 7842 8104
RTD012A110_Cover.pm
1
Black
RJD012A 110.EN
10/27/05, 1:09 PM
Thank you for purchasing a MITSUBISHI HEAVY INDUSTRIES, LTD. Air-Conditioner.
To get the best long-lasting performance, read and follow this User’s Manual carefully
before using your air-conditioner. After reading, please store the Manual in a safe place
and refer to it for operational questions or in the event of any irregularities.
This air-conditioner is intended for domestic use.
An alternative refrigerant (R410A) is used in this air-conditioner. When asking the
dealer for service or inspection and maintenance, explain the dealer about this matter.
ENGLISH
Contents
Safety precautions......................................................................................................................... 2
Choice of operations and features ................................................................................................ 4
Name of each part and its function ............................................................................................... 5
Operation and indication section for remote control .................................................................... 7
AUTO mode operation procedure ................................................................................................ 8
Temperature adjustment during AUTO ........................................................................................ 8
COOL/HEAT/DRY mode operation procedure ........................................................................... 9
Concerning HIGH POWER operation ......................................................................................... 9
Concerning ECONOMY operation .............................................................................................. 9
Air flow direction adjustment procedure .................................................................................... 10
About FAN SPEED .................................................................................................................... 10
OFF-TIMER operation procedure .............................................................................................. 10
ON-TIMER operation procedure................................................................................................ 11
PROGRAM TIMER operation procedure .................................................................................. 11
About TIMER operation ............................................................................................................. 12
Present time setting procedure .................................................................................................... 12
Emergency run operation............................................................................................................ 12
Remote control handling procedure ........................................................................................... 13
When the operation fails with the remote control ...................................................................... 14
Operating hints ........................................................................................................................... 14
Maintenance................................................................................................................................ 14
Has the unit been installed correctly? ......................................................................................... 15
About the Multiple Air-conditioner ............................................................................................ 16
Troubleshooting .......................................................................................................................... 16
Please remember! ....................................................................................................................... 17
When to contact your distributor without delay ......................................................................... 18
Air-conditioner operating conditions.......................................................................................... 18
Power Blackout Auto Restart Function ...................................................................................... 18
Characteristics of HEAT mode operation .................................................................................. 19
Self diagnosis function ............................................................................................................... 20
–1–
RJD012A110_Eng
1
Black
10/27/05, 1:15 PM
Safety precautions
• Before starting to use the system, please read these “Safety precautions” carefully to ensure proper operation of the system.
• The safety precautions are classified as “ DANGER” and “ CAUTION”. Precautions as shown in the column “ DANGER” indicate that
improper handling could have dramatic consequences like death, serious injury, etc. Nevertheless, even precautions as shown in the column
“ CAUTION” might pose a serious problem, depending on the circumstances. Please observe these precautions with great care, since they are
essential to your safety.
• Symbols which appear frequently in the text have the following meaning:
Observe instructions with
great care
Strictly prohibited
Provide positive earthing
• When you have read the instruction manual, please keep it near at hand for consultation. If someone else takes over as operator, make certain that the
manual is also passed on to the new operator.
❚ INSTALLATION PRECAUTIONS
DANGER
The system is meant for domestic, residential etc. use.
The system must be installed by your dealer or a qualified professional.
If used in inferior environments, such as an engineering workplace, the equipment
may function poorly.
It is not advisable to install the system yourself, as faulty handling may cause leakage of water, electric shock or fire.
CAUTION
Do not install near places where inflammable gas may leak.
Depending on the place of installation, a circuit breaker may
be necessary.
LPG
Gas leaks may cause fire.
If you don’t fit a circuit breaker, you may cause an electric shock.
Make sure that you drain the hose properly, so that all the
water has dripped out.
Make sure that the system has been properly earthed.
Negligence may cause flooding in the room resulting in wet furniture.
Earth cables should never be connected to a gas pipe, municipal water pipe, lightning conductor or telephone earth cable. Incorrect installation of the earth cable
may produce an electric shock.
❚ OPERATION PRECAUTIONS
DANGER
Do not expose yourself to the cooling
air for prolonged periods.
Do not insert anything into the air
inlet of inside unit, outside unit.
Store the remote control out of reach
of infants.
This could affect your physical condition and cause
health problems.
This may cause injury, as the internal fan rotates at
high speed.
Failure to observe this may result in the batteries
being swallowed or other accidents.
Only use approved fuses.
Do not handle the switches with wet
hands.
Don’t swing from the system.
Use of steel or copper wire instead of an approved
fuse is strictly forbidden, as it may cause a breakdown
or fire.
This may cause an electric shock.
If the system falls down,
you may get injured.
CAUTION
–2–
RJD012A110_Eng
2
Black
10/27/05, 1:15 PM
Safety precautions
CAUTION
Do not place a combustible insecticide
or paint spray near the blower, nor aim it
directly at the system.
You should not expose any combustion appliance directly to the air
stream of the air-conditioner.
Do not wash the air-conditioner with water.
This may result in a fire.
The appliance may then work inadequately.
This could cause an electric shock.
The system should only be used for its original purpose
and not for anything else like, for instance, preservation of
food, plants or animals, precision devices or works of art.
Do not place anything containing water, like vases, on top of the unit.
Do not install the system at a place
where the air stream of the blower is
aimed directly at plants or animals.
The system is only intended for use in ordinary domestic rooms.
Any other use of the system may damage the quality of food, etc.
Water entering the unit could damage the insulation and therefore cause an electric shock.
This will damage their health.
Do not sit on the outdoor unit nor put
anything on it.
After a long period of use, check the unit's
support structure from time to time.
Do not touch the aluminum fins on the
air heat exchanger.
If the unit falls down or things drop off it, people
could get hurt.
If you don't repair any damage straightaway, the
unit may fall down and cause personal injury.
Failure to observe this may result in injury.
If you operate the system together with
a combustion appliance, you must regularly ventilate the indoor air.
Stand firmly on a stepladder or other
stable object when removing the intake grill and filters.
When you clean the system, stop the
unit and turn off the power switch.
Insufficient ventilation may cause accidents due to
oxygen deficiency.
Failure to observe this may result in injury through
insecure objects toppling over.
Never clean the unit while the internal fan is rotating.
Do not place objects near the outdoor
unit or allow leaves to gather around the
unit.
If there are objects or leaves around the outdoor unit,
small animals may enter unit and contact electrical
parts resulting in break down, emission of smoke or
flame.
❚ PRECAUTIONS FOR TRANSFER OR REPAIRS
DANGER
Consult your dealer for repairs to the
system.
If the air-conditioner is moved elsewhere, contact your dealer or a professional fitter.
If you notice anything abnormal (smell of
burning, etc.), stop the system, turn off the
power switch and consult your dealer.
Wrong repairs could cause an electric shock, fire, etc.
Faulty installation may cause water leakage, electric shock, fire, etc.
Continued use of the system in abnormal circumstances may result in malfunctioning, electric shock,
fire, etc.
–3–
RJD012A110_Eng
3
Black
10/27/05, 1:15 PM
Choice of operations and features
Choice of operations
Page 9
HEAT
COOL
The unit draws in heat from the outside air, transfers it inside and
heats the room.
Cooling by extracting heat from the room.
Page 9
DRY
Page 9
AUTO
Page 8
Automatic selection of operating mode.
Drying by extracting damp from the room.
The Auto mode automatically selects the operation
mode (HEAT, COOL or
DRY), depending on the
room temperature when
switched on.
Functioning of microcomputer depends on setting and room temperatures. It dehumidifies while keeping room temperature almost
constant.
Features
Amenity facility
Page 12
TIMER procedure
When using the timer to switch on, the system become operational
shortly before the set time, depending on the room temperature so that
the desired temperature is reached at the set time.
HIGH POWER mode
There are two timers, for ON and OFF. They can be set as desired.
Page 9
ECONOMY mode
Turning up the power operates the air-conditioner in the power cooling and heating mode.
Page 10, 11
Page 9
This is an economic and healthy level of operation.
–4–
RJD012A110_Eng
4
Black
10/27/05, 1:15 PM
Name of each part and its function
INDOOR UNIT
SRRM25ZE/ZF-S
SRRM35ZE/ZF-S
SRRM50ZE/ZF-S
SRRM60ZE/ZF-S
Air outlet
Air blows out of here.
Air filter
Removes dust or dirt from the inlet air.
Page 15
Air inlet
Draws in the indoor air.
Refrigerant piping connection
electric flex
Unit indication & operation section
Remote control signal receiver
Drain hose
Drains water from the dehumidified air.
Wireless remote control
Page 7
OUTDOOR UNIT
SCM40ZF-S
SCM45ZD/ZF-S
SCM80ZD/ZF-S
SCM48ZF-S
SCM60ZD/ZF-S
Air inlet
(on side & rear surface)
Air outlet
–5–
RJD012A110_Eng
5
Black
10/27/05, 1:15 PM
Unit indication section
Remote control signal receiver
RUN (HOT KEEP) light (green)
• Illuminates during operation.
• Blinks at air flow stop due to the ‘HOT KEEP’.
Page 17
Unit ON/OFF button
TIMER light (yellow)
Illuminates during TIMER operation.
In emergencies, this button can be used for
turning on/off the unit when remote control is
not available.
HI POWER light (green)
Illuminates during HIGH POWER operation.
Page 12
ECONO light (orange)
Illuminates during ECONOMY operation.
Representative installation examples
Ceiling recessed type
Air outlet (Local arrangements part)
Remote control signal receiver
Air inlet grill
(Optional part or Local arrangements part)
Ceiling suspension type
Remote control signal receiver
Air outlet (Local arrangements part)
Air inlet grill
(Optional part or Local arrangements part)
–6–
RJD012A110_Eng
6
Black
10/27/05, 1:15 PM
Operation and indication section for remote control
Operation section
FAN SPEED button
OPERATION MODE select button
Each time the button is pushed, the
cator is switched over in turn.
indi-
Each time the button is pushed, the
cator is switched over in turn.
HI POWER button
indi-
ON/OFF button
This button changes the HIGH POWER
mode.
Page 9
Press for starting operation, press again for
stopping.
AIR FLOW button
ECONO button
This button changes the flap mode. When
pressed, this button changes the mode in the
following order:
This button changes the ECONOMY mode.
(Air scroll)
Page 9
(Swing)
TEMPERATURE button
This button sets the room temperature.
(This button changes the present time and
TIMER time.)
(Flap stopped)
This button is not used.
(Air flow direction adjustment can not be
performed.)
CANCEL button
Page 10
This button cancels the ON timer and OFF
timer.
ON TIMER button
This button selects ON TIMER operation.
RESERVE button
Page 11
This button sets the present time and
TIMER time.
TIME switch
RESET switch
This switch for setting the time.
Switch for resetting microcomputer.
Page 12
• The above illustration shows all controls, but in practice
only the relevant parts are shown.
OFF TIMER button
Page 13
This button selects OFF TIMER operation.
Page 10
Indication section
ECONOMY MODE indicator
HIGH POWER MODE indicator
Indicates during economy mode operation.
Indicates during high power mode operation.
HI POWER
TEMPERATURE indicator
Indicates set temperature.
(Does not indicate temperature when operation
mode is on AUTO)
AUTO
HI
MED
LO
ECONO
AM
PM
OPERATION MODE indicator
Indicates selected operation with
[
ON
(Auto) •
(Cool) •
lamp.
(Heat) •
(Dry)]
OFF
FAN SPEED indicator
Indicates set air flow rate with
TIME indicator
lamp.
Indicates present time or timer setting time.
AIR FLOW indicator
Air flow direction adjustment can not be performed.
OFF TIMER indicator
Indicates during OFF TIMER operation.
ON TIMER indicator
Indicates during ON TIMER operation.
Transmission procedure
When each button on the remote control is pressed – with the remote control pointing towards the air-conditioner unit – a signal is transmitted.
When the signal is received correctly, the unit will beep.
–7–
RJD012A110_Eng
7
Black
10/27/05, 1:15 PM
AUTO mode operation procedure
■ Automatically selects the operation mode (HEAT, DRY, COOL) depending on the room temperature when switched on.
Aim the remote control at the air-conditioner.
1
2
Press the ON/OFF button.
When the unit is not in AUTO mode:
Press MODE button.
Move the [
mark] to the
To stop:
NOTE
• Air is not blown out during the operation.
Page 17
• Simultaneous automatic operation.
Page 16
(Auto) position.
Press the ON/OFF button.
AUTO mode can be
operated by simply
pressing the ON/OFF
button.
• If you don’t want the AUTO mode program, change to
HEAT, DRY or COOL instead of AUTO.
Page 9
Temperature adjustment during AUTO
Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the
COOL
WARM
Press the
button or the
Press the
button.
button.
When a change in temperature is desired.
1
Press the
or
button.
button is pushed, the switch over occurs in the following order –6 → –5 → ............ –1 → ±0 → +1 ............ +6.
■ Each time the
button is pushed, the indicator does not change.
When +6 is indicatored, even if the
button is pushed, the switch over occurs in the following order +6 → +5 → ............ +1 → ±0 → –1 ............ –6.
■ Each time the
button is pushed, the indicator does not change.
When –6 is indicatored, even if the
–8–
RJD012A110_Eng
8
Black
10/27/05, 1:15 PM
button.
COOL/HEAT/DRY mode operation procedure
Aim the remote control at the air-conditioner.
1
2
Press the ON/OFF button.
Press the MODE select button.
Move the [
mark] to the desirable operation position.
(Cool),
3
(Heat),
(Dry)
Press the TEMP button.
4
26°C~28°C
22°C~24°C
DRY
button for the desired temperature.
HEAT
COOL
Press
or
Standard
21°C~24°C
Press the FAN SPEED button
Set the air flow rate as desired.
To stop:
NOTE
Press the ON/OFF button.
Program changing procedure
Set the new program.
• The operation program can also be set or changed when
the air-conditioner is not in operation.
• Air is not blown out during the operation.
Page 17
• The air-conditioners cannot be in different
operating modes at the same time, such as
one unit being in the “Cool” mode and one
unit being in the “Heat” mode.
Concerning HIGH POWER operation
Pressing the HI POWER button intensifies the operating power and initiates a powerful cooling or heating operation for 15 minutes continuously.
The remote control “HI POWER” illuminates but the wind capacity display is erased.
▲
NOTE
• During the HIGH POWER operation, the room temperature is not
controlled. When it causes an excessive cooling or heating, press
the HI POWER button once more to cancel the HIGH POWER
operation.
• HIGH POWER operation is not available during the DRY operation.
• During ON timer operation, HIGH POWER operation will start
when the ON time is reached.
• When the following operations are conducted HIGH POWER operation will be canceled.
1 When the HI POWER button is pressed again.
2 When the operation mode is changed.
3 When ECONOMY operation is conducted.
Concerning ECONOMY operation
Pressing the ECONO button initiates a soft operation with the power suppressed in order to avoid an excessive cooling or heating. The unit operates
1.5°C higher than the setting temperature for the weak wind capacity during cooling or 2.5°C lower than that during heating. A message “ECONO” is
▲
displayed on the remote control. The wind capacity display is erased.
NOTE
• If the ECONOMY operation is selected while operating with the
strong or medium wind capacity, it takes about 1 minute before the
wind capacity drops to the weak level.
• When the following operations are conducted ECONOMY operation will be canceled.
1 When the ECONO button is pressed again.
2 When HIGH POWER operation is selected.
–9–
RJD012A110_Eng
9
Black
10/27/05, 1:15 PM
Air flow direction adjustment procedure
Adjusting up/down air flow direction
■ Air flow direction adjustment can not be performed, although a display will be changed if "AIR FLOW" button is pushed.
Change to AIRFLOW mode.
(Swing)
(Air scroll)
(Flap stopped)
About FAN SPEED
■ You can choose the capacity of your air-conditioner when heating or cooling.
Operation capacity by your choice
Set automatically by microcomputer
Powerful operation with high capacity
Standard operation
Energy-saving operation
FAN SPEED
AUTO
HI
MED
LO
NOTE
• When changing FAN SPEED from HI to LO, the sound of
refrigerant flowing may be heard.
OFF-TIMER operation procedure
■ The unit stops automatically at the end of the set period of time.
Example: You wish it to stop PM 10:30.
If the air-conditioner is not operating, aim the remote control at the air-conditioner.
1
2
Press the ON/OFF button.
Press the OFF TIMER button.
OFF TIMER indicator
3
OFF
is blinking.
Press the “
or
Each time the
button is pressed, the indicator is switched in the order of:
AM
0:00
AM
0:10
Each time the
AM
0:00
” button.
AM
0:20
...
AM
1:00
AM
1:10
...
button is pressed, the indicator is switched in the order of:
PM
11:50
PM
11:40
...
PM
11:00
PM
10:50
...
Set at PM 10:30.
4
Press the RESERVE button.
The indication changes from blinking to steady lighting and the setting is complete.
The timer light (yellow) is on.
⇓
• The unit stops at the end of the set period of time.
Changing of set time
Releasing procedure
Set a new time by using the OFF TIMER button.
Press the CANCEL button to turn off the timer indicator.
– 10 –
RJD012A110_Eng
10
Black
10/27/05, 1:15 PM
ON-TIMER operation procedure
■ Operation starts 5 to 60 minutes before the time that is set so that the room temperature reaches the optimum temperature at that time.
Page 12
Example: In the case you wish to bring the temperature to nearly set temperature in at AM 8:00.
1
Press the ON TIMER button.
ON TIMER indicator
2
Press the “
or
Each time the
ON
is blinking.
” button.
button is pressed, the indicator is switched in the order of:
AM
0:00
AM
0:10
Each time the
AM
0:20
AM
1:00
...
AM
1:10
...
button is pressed, the indicator is switched in the order of:
AM
0:00
PM
11:50
PM
11:40
PM
11:00
...
PM
10:50
...
Set at AM 8:00.
3
Press the RESERVE button.
The indication changes from blinking to steady lighting and the setting is complete.
The timer light (yellow) is on.
⇓
• Operation starts 5 to 60 minutes before the set time.
• The TIMER light goes out at the set time.
Changing of set time
Releasing procedure
Set a new time by using the ON TIMER button.
Press the CANCEL button to turn off the timer indicator.
PROGRAM TIMER operation procedure
■ The timer operations that consist of the combination of the timer being set at both on and off. Once this has been set and operations started,
operations will commence and end at the same time every day as long as the ON/OFF button is not pressed.
Example: When it is desired to stop at 10:30 PM, and then start operation at 8:00 AM,
near the set temperature.
1
Press the ON/OFF button.
■ OFF TIMER operation setting
Set by the procedures on page 10.
PM
Set to
.
OFF
■ ON TIMER operation setting
Set by the above mentioned ON TIMER operation procedures.
AM
.
Set to
ON
The setting of the lighting of the timer light (yellow) of this unit is complete.
The time will be displayed on the remote control unit. The display will change
depending on the operational status.
ON
OFF
(Stopped)
ON
Changing of set time
Releasing procedure
Set a new time by using the OFF TIMER or ON TIMER button.
Press the CANCEL button to turn off the timer indicator.
– 11 –
RJD012A110_Eng
11
Black
OFF
(Operating)
10/27/05, 1:15 PM
About TIMER operation
▼
▼
About Amenity facilities
In COOL operation
(Stop) Operation starts
Amenity facilities enable to start the operation a little earlier, so that the room approaches optimum temperature at ON time when the operation is started by ON-TIMER.
• Mechanism
The room temperature is checked 60 minutes before the timer is at ON. Depending on the temperature at that
time, the operation starts 5 to 60 minutes before the timer is at ON.
• The Amenity facility only functions for COOL and HEAT operation mode (including AUTO). It does not
work for DRY mode.
(Operation)
Set temperature
Check the room temp.
60 mins. in advance.
Set time
Present time setting procedure
■ When inserting the batteries, the present time is automatically set to PM 1:00.
Example: Set to AM 10:30.
1
Press the TIME switch.
2
Press the “
Press with the tip of a ballpoint pen, etc.
The time indicator blinks and can be set to the current time.
or
” button.
(Set to AM 10:30)
3
Press the RESERVE button.
Press within
15 sec.!
The indication changes from blinking to steady lighting and the setting is complete.
NOTE
The timer is set on the basis of the present time, so please set it correctly.
Emergency run operation
• The ON/OFF button on the unit operates ON/OFF temporarily when the remote control is not used.
Operation program
• OPERATION MODE :
AUTO
• FAN SPEED
AUTO
:
Unit ON/OFF button
• Operation starts by pressing the ON/OFF button; it stops if you press the button again.
– 12 –
RJD012A110_Eng
12
Black
10/27/05, 1:15 PM
Remote control handling procedure
Replacing the batteries
The following cases signify exhausted batteries. Replace old batteries with new ones.
• Receiving beep is not emitted when a signal is transmitted.
• Indicator fades away.
1
Remove back lid and take out old batteries.
2
Insert new batteries. (SUM-4 or R03x2)
■ When the indicator shows any abnormal condition, press the reset
switch with the tip of a ballpoint pen.
NOTE
• Don't use old and new batteries together.
• Remove the batteries when the remote control is not used for a
long period.
• The life of a battery conforming to JIS or IEC is 6 to 12 months
with normal use. If used longer, or when an unspecified battery
is used, liquid may leak from the battery, causing the remote
control to malfunction.
Attention to
the , and .
marks
• On the battery is printed its expected life. This may be shorter
than that of the air-conditioner, depending on the date of manufacture.
• However, the battery may still be in working order after expiry
of its nominal life.
3
4
Using the remote control holder
Close back lid.
The remote control can be attached to a wall or pillar by using a
remote control holder. Before installing the remote control, check
that the air-conditioner receives the signals properly.
Press the reset switch with the tip of a ballpoint pen.
For installing or removing the remote control, move it up or down in
the holder.
Warning note for remote control handling
• Don’t go near high temperature
places, such as an electric carpet
or stove.
• Don’t leave the remote control exposed to direct sunlight or other
strong lighting.
• Don’t drop the remote control.
Handle with care.
• Don’t put any obstructing obstacles
between the remote control and the
remote control signal receiver.
• Don’t spill water etc on the remote
control.
• Do not place heavy objects on the
remote control, or step on it.
– 13 –
RJD012A110_Eng
13
Black
10/27/05, 1:15 PM
When the operation fails with the remote control
• Are the batteries running down?
Page 13
Replace the batteries with new ones and repeat the operation.
• If the operation still fails, handle as per emergency
run operation.
Contact your dealer.
Page 12
Operating hints
■ Please observe the following for the most economic and comfortable use of your unit.
Set a suitable room temperature.
Clean the filters frequently.
Avoid direct sunlight and draught.
Excessively high or low temperatures are not
good for your health and waste electricity.
Clogged filters may block the air flow and
cause less efficient operation.
Please request cleaning of the air filter from
special contractor.
Cut out direct sunlight by drawing the curtains or blinds when cooling. Keep windows
and doors shut, except when ventilating.
According to handling directions of
local arrangements part, adjust the
airflow direction properly.
Operate the unit only when needed.
Generate little heat when cooling.
Adjust the up/down and left/right airflow to
ensure a steady room temperature.
Use the timer properly to operate the unit
only when needed.
Keep heat sources out of the room as much as
possible.
Don’t spill water.
Don’t use the following articles:
suitable
temperature
Maintenance
Before maintenance
Turn off the power switch.
• There's a danger of
electric shock.
• Wipe the unit with a
soft, dry cloth.
• Hot water (40°C or more)
It may deform or discolour the unit.
• Petrol, paint thinner, benzine or polishing agents, etc.
They may deform or scratch the unit.
– 14 –
RJD012A110_Eng
14
Black
10/27/05, 1:15 PM
During the operational season
Cleaning the air filter
Please request cleaning of the air filter from special contractor.
* The air filter that comes with the unit cannot be washed with water.
Cooling/heating is affected by an air filter clogged up with dust etc., and the operation noise becomes louder. It may also
use extra electricity. Please clean the air filter at appropriate intervals.
NOTE
At the beginning of the season
At the end of the season
1
Set the temperature setting for approximately a half
day at 30°C and perform the cooling operation.
1
Make certain that there are no obstacles blocking the
air flow around the air intake and outlet openings of
the indoor and outdoor units.
2
3
4
5
6
Check the installation base for corrosion or rust.
Dry the inside of the unit.
2
Stop the unit and turn off the power switch.
3
4
5
Clean and reinstall the air filters.
The unit uses appr. 5W even when the power switch has been turned
off during the off-season for safety or for saving energy.
* The air filter that comes with the unit cannot be washed with water.
Clean both the indoor and outdoor units.
Remove batteries from the remote control.
Ensure that nothing has snapped and that the
earthed flex is not disconnected.
Ensure that the air filters are clean.
* The air filter that comes with the unit cannot be washed with water.
Turn on the power switch.
Insert batteries in the remote control.
Has the unit been installed correctly?
Suitable installation position
• Is there any obstruction in front of the indoor unit, preventing proper ventilation and functioning?
• Don’t install the unit in any of the following places:
• Where there is a danger of leaking inflammable gases.
• Where there is substantial splashing of oil.
• Malfunctioning due to corrosion may occur if the unit is installed in a spa where sulfide gases are generated, or in a seaside resort exposed to
sea breezes. Contact your dealer.
• The air-conditioner and remote control must be at least 1 metre away from a TV set or radio.
• Drain the dehumidified liquid from the indoor unit into a spot that drains well.
Pay attention to operating noises!
•
•
•
•
When you install the unit, take care to choose a place that can comfortably stand the weight of the unit and does not increase the operating noise
or vibration. If there is any likelihood that vibration may be transmitted through the house, fix the unit with the aid of vibration-proof pads
between the unit and the fittings.
Select a place where cold or hot air and operation noises from the indoor and outdoor units do not cause any inconvenience to your neighbours.
Do not leave any obstacles near the outlet and inlet of the outdoor unit. This may cause malfunctioning and increased operating noise.
If you hear an irregular noise during operation, contact your dealer.
Inspection and maintenance
Dependent upon service conditions and operating environment, the inside of the air-conditioner may become dirty after a number of seasons'
service (3 to 5 years). This will reduce performance. In addition to normal cleaning, we would recommend inspection and maintenance. (The air conditioner has a longer life without any trouble.)
• Contact your dealer, or any distributor, for inspection and maintenance. (There will be a charge for this service).
• We would recommend inspection and maintenance to be carried out during the off-season.
• If the supply cord of this appliance is damaged, it must only be replaced by a repair shop appointed by the manufacturer, because special
purpose tools are required.
– 15 –
RJD012A110_Eng
15
Black
10/27/05, 1:15 PM
About the Multiple Air-conditioner
Simultaneous Operation
• The air-conditioners cannot be in different operating modes at the same time, such as one unit being in the “Cool” mode and one unit being in
the “Heat” mode.
• When conducting different operations, the air-conditioner that was operated first will be given priority, so the air-conditioner that is operated
after that will conduct air blowing operation.
• When you want to give priority to the air-conditioner that was started later, either stop the air-conditioner that has priority or cause the
operation type of the unit operated first to match that of the unit operated second.
Automatic Operation
• When the remote control operation switch is in the “Auto” mode the air-conditioner automatically selects either “Cool,” “Dry,” or “Heat” when
operation is started depending on the room temperature.
• During simultaneous operation of air-conditioner units, operation modes may be automatically changed in response to the temperatures of the
individual rooms; this will result in the operation of the outdoor unit being stopped. In such a case, COOL or HEAT mode should be used
instead of AUTO. (This is only relevant when more than one air-conditioner unit is being used.)
Refrigerant (oil) recovery operation
• If the all of the indoor units are not operated at the same time for an extended period, the cooling or heating performance may temporarily
decrease. This is in order to control the recovery of the refrigerant (oil) in the stopped indoor unit(s). At this time, the sound of refrigerant
flowing may be heard from the stopped indoor unit(s).
Troubleshooting
Please carry out the following checks before making a service call.
The air-conditioner does not work at all.
Has the power switch been
turned off?
Has the timer been set in the
"ON" position?
Is there a power failure or a
blown fuse?
If the air-conditioner does not operate properly after you have checked
the left points, or if any doubt still
exists after you have consulted page
17, or if things happen as shown on
page 18, switch off the power and
contact your dealer.
Poor cooling or heating
Have you set the thermostat at a
suitable temperature?
Is the air filter clean? (Not
clogged?)
Did you leave any doors or
windows open?
suitable
temperature
Poor cooling
Is there any direct sunlight entering the room?
Is there a heat source in the
room?
Are there too many people in
the room?
An alternative refrigerant (R410A) is used in this air-conditioner. When asking the
dealer for service or inspection and maintenance, explain the dealer about this matter.
– 16 –
RJD012A110_Eng
16
Black
10/27/05, 1:15 PM
Please remember!
You cannot restart the unit immediately after you have
stopped it.
Restarting has been blocked for 3 minutes after you have stopped or
after switching off the power during operation, to protect the unit.
(RUN light is on)
Not
operating?
Please wait for
three minutes.
The three-minute protection timer in the microcomputer automatically
starts up again.
Air is not blown out when starting the HEATING operation.
Air flow has stopped to prevent blowing out of cold air until the indoor
heat exchanger has warmed up. (2 to 5 min.) (HOT KEEP)
RUN light blinks slowly
(1.5 sec ON, 0.5 sec OFF)
Air is not blown out for 5 to 10 min. at HEATING operation.
RUN light blinks slowly
(1.5 sec ON, 0.5 sec OFF)
Air is not blown out when starting the DRY operation.
When outdoor temperature is low and humidity is high, the unit sometimes performs defrosting automatically. Please wait. During defrosting, water or steam may escape from the outdoor unit.
The indoor fan may stop to prevent re-evaporation of dehumified
moisture and to save energy.
(RUN light is on)
Some steam escapes during COOL operation.
This may occur if the room's temperature and humidity are very high.
It disappears as soon as the temperature and humidity decrease.
There is a slight smell.
Air blown out during operation may smell. This is caused by tobacco
or cosmetics sticking to the unit.
You hear a slight gurgling sound.
This is caused by refrigerating liquid moving within the unit.
You hear a slight cracking sound.
This is caused by heat expansion or contraction.
After a power cut, you cannot re-start, even if power has been restored, unless you have the power blackout auto restart function.
The memory circuit of the microcomputer has been wiped out. Use the
remote control to start the operation again.
Remote control signals are not received.
Remote control signals may not be received if the signal receiver on
the air-conditioner is exposed to direct sunlight or other bright light.
If so, cut out the sunlight or reduce the other light.
Moisture may form on the air outlet grills.
If the unit is operated for a long time in high humidity, moisture may
form on the air outlet grills and start dripping.
FAN operation will be performed even if COOL, DRY, or
HEAT have been selected.
If one unit is operating in COOL mode while another is in operating in
HEAT or any other different operation mode, FAN mode operation
will be implemented. Individual operation modes need to be matched.
Whistling noise is heard from the outdoor unit.
The noise means that the revolution speed is picking up on the compressor.
Sometimes a “Shooooo” sound might come for a short time
from the unit that is turned off.
This is the sound when operation of another indoor unit is stopped.
– 17 –
RJD012A110_Eng
17
Black
10/27/05, 1:15 PM
When to contact your distributor without delay
Turn off the power switch immediately and inform your dealer in any of the following situations:
The fuse or switch blows continuously.
The cable becomes extremely hot.
The covering of the cable is cracked.
CAUTION
Fuse often blows.
If the power cord becomes damaged, ask your dealer or a qualified engineer to install the
replacement to avoid accidents.
The TV, radio or other equipment
starts to malfunction.
A switch does not activate properly.
When faulty movement is observed when the ON/OFF button is pressed, even after turning off the power switch and
restarting the operation after 3 minutes, the faulty movement does not disappear.
You hear a strange noise during operation.
The RUN and TIMER lights on the unit indication section
blink quickly (0.5 sec. ON; 0.5 sec. OFF) and don’t work.
3 minutes go
by, but, why ...
Air-conditioner operating conditions
■ Use within the following operational range. Operating outside of this range may result in the protection devices being activated, preventing the
unit from working.
Cooling operation
Heating operation
Outside temperature
Approximately 21 to 43 °C (SCM45,60ZF-S)
Approximately -15 to 43 °C (SCM40,48,80ZF-S)
Approximately -10 to 21 °C (SCM45,60ZF-S)
Approximately -15 to 21 °C (SCM40,48,80ZF-S)
Inside temperature
Approximately 21 to 32 °C (SCM45,60ZF-S)
Approximately 18 to 32 °C (SCM40,48,80ZF-S)
Approximately 15 to 30 °C
Inside humidity
Below approximately 80%
The long-term use of the unit with a humidity level
exceeding 80% may result in condensation forming on the
surface of the indoor unit, leading to water drips.
—
Power Blackout Auto Restart Function
■ What is power blackout auto restart function?
• Power blackout auto restart function is a function that records the operational status of the air-conditioner immediately prior to it being switched off
by a power cut, and then automatically resumes operations at that point after the power has been restored.
• The following settings will be cancelled:
1 Timer settings
2 HIGH POWER operations
NOTE
• The power blackout auto restart function is set at on when the air-conditioner is shipped from the factory. Consult with your dealer if this
function needs to be switched off.
• When power failure ocurrs, the timer setting is cancelled. Once power is resumed, reset the timer.
– 18 –
RJD012A110_Eng
18
Black
10/27/05, 1:15 PM
Characteristics of HEAT mode operation
Mechanism and capacity of HEAT mode operation
■ Mechanism
• The unit draws in heat from the cold outside air, transfers it indoors and heats the room. The heating capacity of the heat pump mechanism decreases
when the outside air temperature gets colder.
• The hot air circulation system takes a while before warming up the room temperature.
• If the outside temperature becomes extremely low, it would be better to use an additional source of heating.
• If heating operation is performed when the outside temperature is high, room temperature may become higher than the set temperature.
Defrosting
If the outside temperature becomes low and humidity is high, the heat exchanger in the outdoor unit may frost over, which prevents efficient heating.
If this happens, the automatic defroster is activated and during defrosting the heating operation stops for 5 to 10 minutes.
• Both indoor and outdoor fans stop and the RUN light (green) blinks slowly (1.5 sec. ON, 0.5 sec. OFF) during defrosting.
• The outdoor unit may give off some steam during defrosting. This is to help the defrosting process and is not a defect.
• The HEAT operation resumes as soon as defrosting has been completed.
– 19 –
RJD012A110_Eng
19
Black
10/27/05, 1:15 PM
Self diagnosis function
■ We are constantly trying to do better service to our customers by installing such judges that show abnormality of each function as follows:
RUN light
Description of trouble
TIMER light ON
Cause
1 time flash
Heat exchanger sensor (1) error
• Broken heat exchanger sensor (1) wire, poor connector
connection
• Disconnected sensor
2 time flash
Room temperature sensor error
• Broken room temperature sensor wire, poor connector connection
4 time flash
Drain error
• Drain at reverse gradient
• Float switch defective
5 time flash
Heat exchanger sensor (2) error
• Broken heat exchanger sensor (2) wire, poor connector
connection
• Disconnected sensor
6 time flash
Indoor fan motor error
• Defective fan motor, poor connector connection
7 time flash
Closed service valve
Heat exchanger sensor (1) error
• Closed service valve
• Disconnected sensor
Outdoor temperature sensor error
• Broken outdoor sensor wire, poor connector connection
2 time flash
Outdoor heat exchanger fluid pipe
sensor error
• Broken heat exchanger fluid pipe sensor wire, poor connector
connection
4 time flash
Discharge pipe sensor error
• Broken discharge pipe sensor wire, poor connector connection
5 time flash
Suction pipe sensor error
• Brokensuctionpipesensorwire,poorconnectorconnection
6 time flash
Power transistor sensor error
• Brokenpowertransistorsensorwire,poorconnectorconnection
1 time flash
Current cut
• Compressor locking, open phase on compressor output,
shortcircuit on power transistor, closed service valve
2 time flash
Trouble of outdoor unit
• Broken power transistor, broken compressor wire
• Broken discharge pipe sensor wire, poor connector connection
• Compressor blockage
3 time flash
Over current
• Overload operation, overcharge
4 time flash
Over heat of power transistor
• Cooling problem
5 time flash
Over heat of compressor
• Gas shortage, defective discharge pipe sensor, closed service
valve
6 time flash
Error of signal transmission
• Defective power supply, Broken signal wire, defective in/outdoor
unit boards
7 time flash
Outdoor fan motor error
• Defective fan motor, poor connector connection
2 time flash
Rotor lock
• Defective compressor
• Open phase on compressor
• Defective outdoor unit boards
TIMER light
1 time flash
RUN light keeps flashing
RUN light ON
RUN light 2 time flash
– 20 –
RJD012A110_Eng
20
Black
10/27/05, 1:15 PM
USER’S MANUAL
AIR-CONDITIONER
ENGLISH
MANUEL DE L’UTILISATEUR
FRANÇAIS
CLIMATISEUR
ANWENDERHANDBUCH
DEUTSCH
¨T
KLIMAGERA
ISTRUZIONI PER L’USO
SRRM25ZF-S
SRRM35ZF-S
SRRM50ZF-S
SRRM60ZF-S
ITALIANO
CONDIZIONATORE D’ARIA
MANUAL DEL PROPIETARIO
ESPAN˜OL
ACONDICIONADOR DE AIRE
GEBRUIKERSHANDLEIDING
NEDERLANDS
AIRCONDITIONING
MANUAL DO UTILIZADOR
PORTUGUÊS
APARELHO DE AR CONDICIONADO
√¢∏°π∂™ Ã∏™∏™
∂§§∏¡π∫∞
∫§πª∞∆π™∆π∫√
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
РУССКИЙ
КОНДИЦИОНЕР ВОЗДУХА
KULLANIM KILAVUZU
TÜRKÇE
SPL‹T KL‹MA
AIR-CONDITIONING & REFRIGERATION SYSTEMS HEADQUARTERS
16-5, 2-Chome, Kounan, Minato-ku, Tokyo, 108-8215, Japan
Fax: (03) 6716-5926
MITSUBISHI HEAVY INDUSTRIES EUROPE, LTD.
AIR-CONDITIONER DIVISION
3rd Floor Thavies Inn House 3-4 Holborn Circus London EC1N 2HA, ENGLAND
Phone: 44(0)20 7842 8171
Fax: 44(0)20 7842 8104
RTD012A110_Cover.pm
1
Black
This air conditioner complies with EMC Directive 89/336/EEC, LV
Directive 73/23/EEC.
Este acondicionador de aire cumple con la directiva EMC: 89/
336/EEC, LV Directiva 73/23/EEC.
Ce climatiseur est conforme à la Directive EMC: 89/336/EEC, LV
Directive 73/23/EEC.
Deze airconditioner voldoet aan EMC Directive 89/336/EEC, LV
Directive 73/23/EEC.
Dieses Kimagerät erfüllt die EMC Direktiven 89/336/EEC, LV
Direktiven 73/23/EEC.
Este aparelho de ar condicionado está em conformidade com a
Directiva EMC 88/336/CEE e a Directiva LV 72/23/CEE.
Questo condizionatore d’aria è conforme alla Direttiva EMC: 89/
336/EEC, LV Direttiva 73/23/EEC.
∞˘Ùfi ÙÔ ÎÏÈÌ·ÙÈÛÙÈÎfi Â›Ó·È Û‡ÌʈÓÔ Ì ÙȘ ÚԉȷÁڷʤ˜ Ù˘
√‰ËÁ›·˜ EMC 88/396 Î·È Ù˘ √‰ËÁ›·˜ LV 73/23 Ù˘ ∂√∫.
RJD012A110
10/27/05, 1:09 PM