Product Promotion Jul-Dec. 2013

KGC RESOURCES SDN BHD
MALAYSIA
ACKNOWLEDGMENT
MESSAGE FROM OUR MANAGEMENT
Dear Our Valued Customer and Business Partners,
T
hank you for being our valued customers. We are grateful for the pleasure of serving you and meeting your
laboratory equipment needs for the last two quarters. In this time of gratitude, we thank you for your continued
support for trusting us and our products. Henceforth, we value your patronage and appreciate your confidence in
us. Counting you among our customers is something which we are grateful for.
This year has been challenging, but we have overcome these challenges in triumph—with the help of you and
your fellow researcher, engineers, and scientist. You have focused on the future rather than getting stuck in the dayto-day difficulties. You have worked hard allowing our business to thrive.
On behalf of the management and staff of KGC RESOURCES SDN BHD, we are once again grateful and thank
you for your support and continuous loyalty to us. We hope that you will enjoy our promotion catalog and promise to
offer you with much lower price and attractive Free Gifts or Cash Rebate for your future purchases.
Please feel free to browse our e-product catalog and e-promotion catalog on www.kgcscientific.com and/
or www.kgcresources.com.
Thank you!
PROMOTION TERMS
THE EXCITEMENT HAS JUST BEGIN.
INTRODUCTION
ALREADY HAVE EITHER THE DSLR CAMERA OR SMART PHONE
OR TABLET? HOW ABOUT CASH REBATE OR GIFT CERTIFICATE!
FOR PURCHASE OF RM 120,000 AND ABOVE*
OR
OR
NIKON D3200 KIT
WITH 18-55 MM LENS
FOR PURCHASE OF
RM 60,000 AND ABOVE*
ASUS VIVO TAB SMART
ME400CL-1B028W
FOR PURCHASE OF
RM 20,000 AND ABOVE*
RO WATER
PURIFICATION SYSTEM
GARMIN NUVI@2565LM
OR
GIFT VOUCHER WORTH OF RM 500
2
KGC RESOURCES
SAMSUNG GALAXY S4
16 GB
OR REBATE FOR FUTURE PURCHASES**
TOTAL PURCHASE (RM)
REBATE VOUCHER (RM)
100,000
1,000
60,000
500
20,000
200
10,000
100
5,000
50
TERMS & CONDITIONS
1. Prices quoted is included of delivery, installation, training & commissioning within Klang Valley
2. Prices quoted are valid until 31st December 2013. KGC reserves the right to change the price without prior notice.
Note:
* KGC reserves the right to replace gift items of similar value in the event of unavailability of stock.
** Rebate Voucher. All Claims must be claimed before or on 31st December with proof of purchase documents.
KGC RESOURCES SDN BHD
MALAYSIA
TABLE OF CONTENTS
ADVANCE MATERIAL SCIENCE
4
USA
KOREA
USA
FRANCE
4
15
16
17
18
OIL & GAS INSTRUMENTATION
USA
ITALY
AUSTRALIA
IMR
HTA GASTECH
18
18
19
20
BIOTECHNOLOGY & LIFE SCIENCE
JAPAN
CHINA
KOREA
KOREA
USA
BE MARUBISHI
HEB
BNF KOREA
HYSC
QUANTEK INSTRUMENTS
20
21
22
22
23
LABORATORY EQUIPMENT
24
NEW ERA
EBERBACH
VACUUMER
HAHN SHIN SCIENTIFIC
SAMHEUNG ENERGY
HYSC
MTI
SLI INSTRUMENTS
24
26
27
28
29
30
31
34
USA
USA
KOREA
KOREA
KOREA
KOREA
USA
CHINA
NANOMATERIAL & SEMICONDUCTOR
LJUHV
TABLE OF CONTENTS
MTI
HANTECH
HARRICK PLASMA
CORDOUAN TECH
35
TAIWAN
CUSTOMIZED DESIGN
Plug Flow Reaction Tube
Membrane Filtration System
Walk-In Laboratory Room
KGC RESOURCES SDN BHD was formed to deliver innovative laboratory
equipment designs to science and research industry. We have combined
experienced and talented engineers to understanding end users’ needs
from developing the designs, fine tuning the mechanical works until the
fabrication parts. Our engineers are young but talented and we pride
ourselves in our tag line: STRENGTH THROUGH INNOVATION.
We have been involved in constructing Walk-In Laboratory Room, Plug Flow
Reaction Tube, Membrane Filtration System, Corrosion Control Test, Heat
Transfer System and many others in various fields that are related with
research purpose. Any inquiry please feels free to contact us.
PROMOTIONAL PRODUCTS CATALOG 2013
www.kgcresources.com | www.kgcscientific.com
3
MTI
USA
MUFFLE FURNACE
Muffle furnace (400°C-1800°C) steps in as the necessary part of laboratory that requires extreme heat environment. MTI is providing the
muffle furnace at an affordable cost. The sizes of the muffle furnace are various from the smaller furnaces which are conveniently placed on
a workbench, to the larger units that has a coveted capacity and competent for all duty.
KSL-1100X-S
General Features:
KSL-1500X-S
KSL-1700X-A2
• Double shell steel case
• High purity alumina fiber insulation
• PID automatic control and auto tune function temperature controller
ADVANCE MATERIAL SCIENCE
Model
Chamber Dimension
Volume
LxWxH
Heating
Rate
KSL-1200X-M
Working
Temperature
Power
Price
KSL-1100X-S 4” x 4” x 4“
1L
Max: 30°C /min
Max: 1200°C (< 1 hour) Resistance
Cont: 1100°C
Wire
700 W
KSL-1200X-L
16” x 16” x 16”
64 L
Max: 20°C /min
Max: 1100°C (< 1 hour) Resistance
Cont: 1000 °C
Wire
5000 W
KSL-1200X-J
6” x 6” x 7”
4.2 L
Max: 30°C /min
Max: 1200°C (< 4 hour) Resistance
Cont: 1100 °C
Wire
3000 W
KSL-1200X
12” x 8” x 5”
7.2 L
Max: 50°C /min
Max: 1200°C (< 1 hour) Resistance
Cont: 1100°C
Wire
3500 W
KSL-1200X-M
12” x 12” x 12”
27 L
Max: 10°C /min
Max: 1200°C (< 1 hour) Resistance
Cont: 1100 °C
Wire
7000 W
KSL-1500X-S 4.7” x 4.7” x 4.7”
1.7 L
Max: 20°C / min Max: 1500°C (< 1 hour) Silicon
Cont: 10°C/min Cont: 1400°C
Carbide
KSL-1700X-S 4.7” x4.7” x 4.7”
1.7 L
Max: 20°C / min Max: 1700°C (< 3 hour) Molybdenum 3000 W
RM 32,975
Cont: 10°C/min Cont: 1600°C
Disilicide
KSL-1700XA1P
6” x 6” x 6”
3.6 L
Max: 20°C / min Max: 1700 °C (< 3 hour) Molybdenum 4800 W
RM 48,165
Cont: 10°C/min Cont: 1600 °C
Disilicide
KSL-1700X-A2
8” x 8” x 8”
8.4 L
Max: 20°C / min Max: 1700 °C (< 3 hour) Molybdenum 4000 W
RM 68,080
Cont: 10°C/min Cont: 1600 °C
Disilicide
2000 W
RM 7,800
RM 28,750
RM 10,850
RM 15,895
RM 24,870
RM 24,780
VACUUM CHAMBER FURNACE
Model
VBF-1200X-H8
Quartz Tube Size
7.6 L
Working Temperature
Maximum 1100°C for 30 minutes and 1000°C continuously
Features
• PID automatic control and auto-tune function
• Stainless steel vacuum flange with one needle valve as gas inlet
• One port for vacuum pump connection
• Digital vacuum gauge provided
UL Recognition
-
Price
KGC RESOURCES
VBF-1200X-H8-UL
8” O.D x 7.5” I.D.x 13.4“ L
Volume
4
Heating
Element
All electric components are UL
recognized
RM 54,840
RM 72,780
MTI
USA
TUBE FURNACE
GSL-1100X
GSL-1100X-50-LVT
EQ-RTP-1000-LV3C
OTF-1200X-S
General Features:
OTF-1200X-S50-2F
• Heavy duty case
• High purity alumina fiber insulation
• PID automatic control and auto tune function temperature controller
• Quartz tube can stand heat until 1200°C with various diameter sizes offered
• SS304 vacuum flange with double high temperature silicone O-ring are included
• Two fiberous ceramic tube blocks are included for blocking heat radiation from inside tube
Heating
Rate
Working
Temperature
1” O.D.
or
2” O.D.
Max: 20°C /min
GSL-1100X50-LVT
1” O.D.
Max: 20°C /min
OTF1200X-S
1” O.D.
or
2” O.D.
Max: 20°C /min
OTF-1200XS50-LVT
1” O.D.
or
2” O.D.
Max: 10°C /min
OTF-1200XS50-2F
2” O.D.
Max: 10°C /min
OTF-1200X
Model
Quartz Tube
Option
Features
Advantages
Max: 1100°C (< 1 hour)
Cont: 1000°C
Dial Vacuum Gauge
The chamber can be set
up in vertical, horizontal,
or at an angle
Max: 1100°C (< 1 hour)
Cont: 1000°C
Digital Vacuum
Gauge, Temperature
Calibrator, Vacuum
Pump and Filter
Stainless steel shell with
adjustable height
Max: 1200°C (< 1 hour)
Cont: 1100°C
Dial Vacuum Gauge
Split-able tube furnace
with optional tube sizes
Max: 1200°C (< 1 hour)
Cont: 1100°C
Digital Vacuum
Gauge, Temperature
Calibrator, and
Vacuum System
Can heat sample in
vacuum up to 1E-2 Torr
or flowing gas.
Max: 1200°C (< 1 hour)
Cont: 1100°C
Digital Vacuum
Gauge, Two Channel
Gas Mixing Station,
and Vacuum System
Anti corrosive gauge to
be used with aggressive
gases
60 mm O.D. Max: 20°C /min
or
80 mm O.D.
or
100 mm O.D.
Max: 1200°C (< 1 hour)
Cont: 1100°C
Dial Vacuum Gauge
Split-able tube furnace
with optional tube sizes
OTF-1200X4-RTP
4” O.D.
Max: 50°C /sec
Max: 1100°C (< 10 min)
Cont: 600°C
Digital Vacuum
Gauge
Rapid thermal processing
system for fast heating
RM 62,900
and double layer steel
case
EQ-RTP1000-LV3C
4” O.D.
Max: 50°C /sec
Max: 1100°C (< 10 min)
Cont: 600°C
Three Channels
Gas, Flowmeter, and
Vacuum System
Rapid thermal processing
system for fast heating,
RM 92,600
double layer steel case
with mullite liner
GSL-1100X
PROMOTIONAL PRODUCTS CATALOG 2013
Price
ADVANCE MATERIAL SCIENCE
OTF-1200X-4-RTP
RM 14,285
RM 31,280
RM 16,500
RM 32,580
RM 35,580
RM 16,950
www.kgcresources.com | www.kgcscientific.com
5
MTI
USA
ADVANCE MATERIAL SCIENCE
VACUUM CHAMBER
6
SVC-6050
MSK-VA25
EQ-SP-VC-2
Stainless Steel Vacuum Chamber for
Sample Storage
Vacuum Chamber with Automatic Pressure
Control
Auto Vacuum Dessicators with built in Pump
• 53 liter capacity with inside dimension
of 16” L x 13” W x 14” H
• Safely supports vacuum until -0.1 MPa
• Double-wall stainless steel construction
• KFD25 vacuum pump connection port
• Electric strip built inside chamber to allow
electrical device usage under vacuum
• Inert gas can be filled inside chamber
• 25 liter capacity with inside dimension of
12” L x 12” W x 11” H
•Vacuum pressure until 7.5 Torr using
mechanical pump
• Built in pressure sensor to cut off pump at
11.6 KPa
• 6” touch screen PLC panel for automation
• 226 l/m vacuum pump is built in
• 4 liter capacity with inside dimension of
13.8” L x 9.3 W x 5.9” H
• Electronic pump automatically seals the
container when close top cover
• Sustainable vacuum level: 667 torr
• Complete suction in only 2 minutes and
maintain vacuum automatically
• Vacuum seal indicator lights
RM 11,875
RM 29,700
RM 1,280
VACUUM OVEN
EQ-DZF-6020
EQ-DZF-6050
EQ-DZF-6020-HT500P-H220
General Features:
• The chamber is designed with stainless steel and welded with bracing pieces
• A good vacuum seal is achieved by silicone door gasket and positive latch door
• Vacuum port and gas inlet are installed to create a gas environment in the chamber
• PID temperature controller is installed
Model
Chamber Dimension
Volume
LxWxH
Working
Temperature
Features
Power
EQ-DZF-6020 12” x 12” x 11“
25 L
Max: 250°C (< 4 hour)
Cont: 200°C
28 Segments Temperature
Controller
1000 W
EQ-DZF-6050 16.3” x 13.5” x
14.5”
53 L
Max: 250°C (< 4 hour)
Cont: 200 °C
28 Segments Temperature
Controller
1500 W
EQ-DZF-6020 12” x 12” x 11“
-FP
25 L
Max: 250°C (< 4 hour)
Cont: 200 °C
28 Segments Temperature
Controller, Flowmeter and
Vacuum Pump System
1000 W
EQ-DZF-6020 12” x 12” x 11“
-HT500P110J
25 L
Max: 500°C 28 Segments Temperature
Controller, Chiller and
Vacuum Pump System
1800 W
EQ-DZF-6020 12” x 12” x 11“
-HT500P-110
25 L
28 Segments Temperature
Controller, Flowmeter, Chiller
and Vacuum Pump System
1800 W
EQ-DZF-6020 12” x 12” x 11“
-HT500PH220
25 L
30 Segments Temperature
Controller, Flowmeter, Chiller
and Vacuum Pump System
2500 W
KGC RESOURCES
Max: 500°C Max: 500°C Price
RM 8,750
RM 12,950
RM 20,728
RM 26,865
RM 31,735
RM 41,480
MTI
USA
DHG-9023Q
DHG-9040
EQ-DHG-9070V
EQ-DHG-9015-220
Convection oven from MTI is a CE Certified Mechanical Convection Oven with
digital temperature controller. It can achieve dependable, uniform conditions by
convecting heat to the sample evenly. Such convection oven can be widely used
for drying, stoving, wax-melting and sterilization. It is ideal heating equipment
for material R&D laboratories.
EQ-DHG-9440V220
Model
DHG-9023Q
Chamber Dimension
Volume
LxWxH
12” x 12” x 11“
25 L
EQ-DHG9070V
18” x 14” x 18”
IEC26113-8
.3.4
18” x 14” x 18”
EQ-DHG9140V220
21.6” x 21.6” x 16”
EQ-DHG9440V220
28” x 26” x 35”
EQ-DHG9000JB
14” x 14” x 14”
EQ-DHG9000J
14” x 18” x 18”
EQ-DHG9015-220
10” x 10” x 8”
12 L
DHG-9040
14” x 14” x 14”
30 L
PROMOTIONAL PRODUCTS CATALOG 2013
71 L
71 L
122 L
410 L
43 L
71 L
Working
Temperature
Max: 250°C Features
Power
28 segments temperature controller
and 3” glass wool insulation to
prevent heat loss from working
chamber
500 W
RM 8,750
Max: 300°C 28 segments temperature controller
(< 8 hour) and overheat protection sensor
Cont: 250°C
automatically cuts power if overheated
1500 W
Max: 250 °C
Explosion proof glass window and
frame, digital temperature controller
with over-heated alarm and finishing
alert (battery thermal abuse test)
1500 W
Max: 300°C 28 segments temperature controller
(< 8 hour) and overheat protection sensor
Cont: 250°C
automatically cuts power if overheated
2300 W
Max: 300°C 28 segments temperature controller
(< 8 hour) and overheat protection sensor
Cont: 250°C
automatically cuts power if overheated
3500 W
Max: 400°C
28 segments temperature controller
and overheat protection sensor
automatically cuts power if overheated
2200 W
28 segments temperature controller
and overheat protection sensor
automatically cuts power if overheated
3200 W
Max: 250°C
Single point digital precision
temperature controller with one
setting point and +/-1°C tolerance
750 W
Max: 250°C
3” glass wool insulation to prevent
heat loss from working chamber
1000 W
Max: 400°C
Price
ADVANCE MATERIAL SCIENCE
CONVECTION OVEN
RM 8,750
RM 13,980
RM 13,980
RM 24,780
RM 14,950
RM 20,720
RM 4,250
RM 7,710
www.kgcresources.com | www.kgcscientific.com
7
MTI
USA
ADVANCE MATERIAL SCIENCE
FURNACE & GLOVE BOX ACCESSORIES
EQ-OFP-14
EQ-TW-3A
EQ-2TW-4C
EQ-Adixen-ACP15
Oilless Vacuum Pump
Single Step Rotary Vane
Vacuum Pump
Double Step Rotary Vane
Vacuum Pump
Pfeiffer’s High Speed Oilless Dry
Vacuum Pump
• 120 liter/min
• Vacuum up to 80 - 100 Torr
• 450 W
• Noise level below 60 dB
• Completely oilles and
maintenance free
• For small gas circulating system
• 187 liter/min
• Vacuum up to 0.075 Torr
• 1/2 HP 360 W
• 20 ml volume of oil
• Oil Mist Reduction Unit with
KF-25 Adapter and Quick Clamp
are included
• 226 liter/min
• Vacuum up to 0.051 Torr
• 3/4 HP 550 W
• 1000 ml volume of oil
• Traps particles up to 0.3 microns
• Exhaust Filter, KF-D25
Adapter and Quick Clamp are
included
• 226 liter/min
• Vacuum up to 0.022 Torr
• 550 W (atm)
• KF25 Adaptor and 2 Quick
Clamp are included
• Oil-free vacuum with no
hydrocarbon vapor back
streaming
RM 4,250
RM 4,250
RM 7,680
EQ-MFC-1
EQ-VPC-30D
EQ-VPC-30
Precision Digital Mass Flow
Controller
Dual Valve Digital Vacuum &
Pressure Gauge
In-Line Digital Vacuum Pressure Hanheld Infrared Thermometer
Controller
with Laser Pointer
• Flow range up to 200 sccm
• +/- 2% full scale
• SS316 body material
• Pressure up to 1 MPa
• 1/4” tube fitting for inlet &
outlet
• Range up to 800 Torr
• +/- 0.25% full-scale
• Measurement in: psia, psig,
mm Hg, “ Hg, “ H20, mBar, Atm,
Torr, kPa
• For clean, dry, noncorrosive
and inert gas
• 1/8” NPT female connection
• Range up to 800 Torr
• +/- 0.25% full-scale
• Measurement in Torr
• For clean, dry, noncorrosive
and inert gas
• 1/8” NPT female connection
RM 5,800
RM 11,620
EQ-MTM-3
KGC RESOURCES
RM 8,750
EQ-OM-OS524E
• Measurement range from
538°C - 2482°C
• Built-in Laser sighting in
Circle & Dot configurations
• 100 ms response time
• Spectral response within 2 to
2.5 microns
RM 11,580
EQ-MTS02
Three Channels Temperature
Monitoring System
Temperature Control System for
MTI Furnace via Computer
• Computerized via an RS232
comm port (cable included)
• Three buzzing alarms
• Accept K, S and B type of
thermocouple
•Cut off power function when
temperature exceeds the set
point
• Can be used for MTI furnaces
with 518P controller except
GSL-1100X-S, KSL-1200-S and
OTF-1200X-S.
• One control module, serial
port controller cable and one
disc of software package are
included
RM 11,580
8
RM 39,798
RM 1,089
MTI
GPH-DHDO
EQ-MTC-C4
EQ-MTC-A5
EQ-MTC-Z3
PPM Grade Dual Column Inert
Gas Purifier
WK518P Temperature Control
Unit
Single Zone Precision
Temperature Control Unit
Three Zone Precision
Temperature Contol System
• Built-in Regeneration Heater
which can be heated up to
300°C
• It removes H2O, O2, CO, CO2,
H2 and NMCH’s to <0.1 ppm
from any 99.9% purity inert gas.
• Max pressure up to 0.5 MPa
• Max flow rate up to 400 mL/
min
• The controller uses PID via
SCR power control with 30
segments programmable.
• Designed for lab furnaces
heated by resistant wire, SiC
and MoSi2 elements up to
1800°C at Max 4KW
• Accept J, K, T, E, N, B, R and
S thermocouple input
• The controller uses PID via
SCR power control with 30
segments programmable.
• Designed for precision control
high temperature furnace from
1000°C - 1500°C with heating
elements of resistant wire or SiC
• Accept K, S, R, J, B, C and D
thermocouple input
• The controller uses PID via
SCR power control with 30
segments programmable.
• Designed for precision control
three zone tube furnace from
100°C - 1500°C with heating
elements of resistant wire or SiC.
• Accept K, S, R, J, B, C and D
thermocouple input
RM 8,850
RM 29,403
RM 12,320
RM 5,600
EQ-CGM-2F
EQ-GSL-3F-SS
EQ-W3000
EQ-RH-800
Two Channel Trace Gas Mixer
Gas Mixing Control Station
Trace Oxygen Analyzer
Precision Humidity Analyzer
• Two Flowmeter with flow rate
range from 16 to 160 mL/min
• Mechanical Pressure Gauge
(mixing tank): 0 - 1.0 MPa,
(0.02 MPa/grit)
• Three Pipe fittings for 1/4”
pipe (nylon or stainless steel)
• No power required
• Three Channel Flowmeter and
Valves are provided
• To control up to 3 gases
flowing through vacuum sealed
MTI tube furnaces
• Mechanical Pressure Gauge
(mixing tank): -0.1-0.15 MPa,
(0.01 MPa/grit)
• KF40 Connector is provided
• Three auto-ranging scales
available: 0.01 ppm to 3000 ppm
• ZrO2 fuel-cell as the oxygen
sensor
• Max pressure up to 90 psi
• Up-limit and low-limit alarm
signal programmable
• KF25 Flange is provided
• Measure humidity level up to
999.9 ppm
• Working pressure range is 0.1
Pa - 30 MPa
• Gas flow rate range is 1-5 lpm
•Alarm signal when higher than
20 mA or lower than 4 mA
RM 5,800
RM 18,780
RM 16,800
RM 17,495
EQ-RH-606B
ADVANCE MATERIAL SCIENCE
USA
EQ-GD-01
Humidity & Temperature Monitor
Laboratory Gas Drying Unit
• Alarm can be set based on
requirement
• Detachable Probe and KF25
feedthrough are provided
• Temperature range: 0°C-80°C
• Humidity range: 2%RH to
95%RH
• Accuracy: ±3%RH
• Sensor cable length: 3 meters
• Max working pressure: 90 psig
• Max efficiency at 0.1 scfm
• 50 grams of water capacity
• Inlet and outlet connectors are
SS 1/8” NPT female fittings wih
molded polycarbonate column.
• Indicating dessicant turns
blue when active and turns pink
when exhausted
RM 1,580
RM 1,369
PROMOTIONAL PRODUCTS CATALOG 2013
www.kgcresources.com | www.kgcscientific.com
9
MTI
USA
POLISHING MACHINE
MTI manufactures and distributes all types grinding / polishing machines from 3” to 15” plate for research laboratories in material engineering,
semiconductor failure analysis, precision optics and lapidary hobbyists. They can be used as a high precision lapping machine for polishing
crystal components, semiconductor wafers and ceramic substrates. They also can be adopted as a standard grinding and polishing machine
for preparing metallographic samples.
EQ-Unipol-800
EQ-Unipol-802
Model
EQ-Unipol-800
EQ-Unipol-810
EQ-Unipol-820
8” Precision
Auto Lapping
and Polishing
Machine with
Two 3” Work
Stations
8” Multi Purpose
Precision
Polishing
Machine with
York Support
Variable Speed 500 - 3000 rpm
0 - 125 rpm
Features
ADVANCE MATERIAL SCIENCE
Description
8” Economic
Grinding /
Polishing Machine
with Complete
Diamond Lapping
Accessories
• Has coolant
reservoir on the
top and take off
splash guard
• Direct drive on
2” flange
• 8” of diamond
grinding plates
accessories
provided
Price
RM 6,056
EQ-Unipol-802
EQ-Unipol-1502
8” Heavy Duty
Dual Platens
Grinder/ Polisher
with Magnetic
Plates
12” Heavy
Duty Precision
Grinding /
Polishing
Machine with
Two 4” Work
Stations
15” Precision
Automatic
Lapping /
Polishing Machine
with Three 4”
Work Stations
0 -600 rpm
0 - 600 rpm
50 - 600 rpm
0 - 80 rpm
• Can be
controlled
independently for
polishing 2 pcs
of 3” wafers in
one running with
digital display
• Adjustable
timer for autostop
• 8” lapping
plate accessories
provided
• Belt driven
platen with digital
display.
• 3” flat sample
holder for
polishing flat
sample.
• York supporter
to allow polishing
automatically.
• 8” lapping
plate accessories
provided
• Belt driven
platen with
stable and quiet
operation
• Independent
speed control
with digital
display for each
plate
• 8” lapping
plate accessories
provided
• Digital control
panel and water
resistance
• 12” Aluminum
mater plate with
magnetic pad
and steel buffer
sheet provided
for easy
installation
• 12”
lapping plate
accessories
provided
• Can be
controlled
independently for
polishing 3 pcs
of 4” wafers or 9
pcs of 2” wafers
in one running
• Adjustable timer
for auto-stop
• 15” lapping
plate accessories
provided
RM 34,850
RM 22,350
RM 13,380
RM 11,275
RM 50,780
EQ-PF-4-1V
2” Polishing Fixture for Precision/
Automatic Thinning and Polishing
4” Polishing Fixture with Vacuum Chuck
for Faster Thinning and Polishing
• 2” sample holder to take wafer or
substrate up to 2”
• Thickness control screw fixture with
resolution of 0.005 mm
• Two micrometers are included with
resolution of +/- 1 micron
• Two dead weighs are included
• Can fit with Unipol 801, Unipol 802
and any precision 8” polishing machine
with York support to achieve automatic
polishing or thinning.
• 4” sample holder vacuum chuck to
take wafer or substrate up to 4”
• Vacuum chuck can suck wafer
through vacuum pump without wax
• One digital micrometer is included
with resolution of +/- 1 micron
• Two dead weighs are included
• Can fit with Unipol 1202 and Unipol
1502 and any precision 12” or larger
polishing machine with York support to
achieve automatic polishing or thinning.
RM 1,392
KGC RESOURCES
EQ-Unipol-1502
EQ-Unipol-1210
EQ-PF-2-1
Assembly
10
EQ-Unipol-820
EQ-Unipol-810
Assembly
RM 8,850
MTI
USA
CUTTING AND DICING SAWS
SYJ-30
SYJ-40
SYJ-150
Heavy Duty High Speed Abrasive Cut-off
Saw with 10” SiC Cutting Blades
High Speed Diamond Cut-off Saw with Vise
and 4” Diamond Blades
Digital Low Speed Diamond Saw with 4”
Precision Blades & Complete Accessories
• 10” SiC cutting blades are included
• Max cutting section is up to 30 mm x
30 mm
• Manually push up with T clamp vise is
included for quick tightening or release
• Motor speed is 2800 rpm
• A cooling system is built in with inlet
and outlet provided
• 4” impregnated diamond blades are
included
• Speed varies from 400 to 3250 rpm
• Flat saw table for easy trimming oversized
slabs
• Max cutting depth is 25.4 mm
• Vise provided to handle the sample
smoothly
• Variable 0 - 600 rpm with LED digital
display
• Cutting width range is from 1mm - 24mm
by adjusting the LCD digital micrometer
• Max cutting depth is 55 mm when using
25 mm O.D blade flange
• Two angle adjustable sample holder is
included
RM 3,800
RM 22,350
RM 7,290
BATTERY TEST EQUIPMENT
BST8-3
ADVANCE MATERIAL SCIENCE
Digital Micrometer
EQ-M9711
8 Channel Battery Analyzer for All Rechargeable Cells
DC Programmable Electronic Load for Battery and Capacitor
Discharging Test
• To analyze small coin cells and cylindrical batteries from 6.0 mA
to 3000 mA, up to 5V
• Eight independent programmable channels
• The software (TC5.3) with calibration function is included to set
various working modes for measuring capacity and life cycle for all
types of rechargeable batteries
• Six high speed operation modes: CC, CR, CV, CW, CC+CV,
CR+CW
• Over current, over voltage, over power, over heat, polarity
reversed protection
• Supporting remote voltage compensation and multi-data storage
• USB port with software interface to PC
RM 18,820
RM 5,850
LABORATORY MIXER
MSK-USP-3N
MSK-VUSP-12
Ultrasonic Processor for
Dispersing, Homogenizing and
Mixing Liquid Chemicals
Ultrasonic Processor with
Vacuum Chamber and Pump
• Ultrasonic power up to 300 W
and 20 kHz frequency
• Liquid handling from 100 ml
- 2000 ml
• Digital timer range from 1 sec
- 99 hours
• Temperature sensor is installed
• Ultrasonic power up to 1200 W
and 20 kHz frequency
• Liquid handling from 100 ml
- 2000 ml
• Digital timer range from 1 sec
- 99 hours
• Temperature control built in
• Vacuum level less than 1 Torr
RM 19,980
RM 54,960
PROMOTIONAL PRODUCTS CATALOG 2013
www.kgcresources.com | www.kgcscientific.com
11
MTI
USA
LABORATORY PRESS
CIP-15
EQ-YLJ-40T
EQ-YLJ-24TA-H
Model
EQ-YLJ-12T
ADVANCE MATERIAL SCIENCE
EQ-YLJ-24T
12 Metric Tons
12 Metric Tons
EQ-YLJ-24TA-H
24 Metric Tons
EQ-YLJ-40TA
40 Metric Tons
Dimension
L x W x H (mm)
MSK-110D
Features
RM 8,316
292 x 279 x 546 • Dial pressure gauge is built in with a protection cover
• Built in hydraulic pump with auto return function and
transparent protection shield
RM 13,068
330 x 380 x 480 • Pressure gauge with built in pre-stable pressure switch
and timer
• Pressure load will stop when pressure reach pre-setting
point
RM 20,790
370 x 350 x 450 • Pressure gauge with built in pre-stable pressure switch
and timer
• Pressure load will stop when pressure reach pre-setting
point
RM 23,760
RM 20,760
40 Metric Tons
160 x 330 x 470 • Built in hydraulic pump with auto reset function to return
the stage to the original position
MSK-110
8 Metric Tons
228 x 176.8 x
333
MSK-160D
MSK-110D
CIP-20TA
CIP-50A
8 Metric Tons
8 Metric Tons
Price
270 x 200 x 450 • Dial pressure gauge is built in with a protection cover
• Built in hydraulic pump with auto return function and
transparent protection shield
EQ-YLJ-40T
CIP-15
12
Max Pressure
MSK-160D
• Manual hydraulic pump with automatic pressure relief
• Suitable for sealing various types of coin cells such as
CR2032,CR2025,and CR2016 without changing the die
240 x 125 x 410 • Certified electric crimper in assembling and
disassembling dies for CR2032, CR2025, & CR2016 coin
cells
228 x 176.8 x
333
• Manual hydraulic pump with automatic return
• Suitable for disassembling various types of coin
cells, such as CR2032, CR2025, and CR2016, without
destroying the internals of the cell in order to study the
materials inside
RM 18,320
RM 29,700
RM 20,985
Chamber: 300 MPa
Hydraulic: 15 T
260 x 210 x 500 • Smallest cold isostatic pressure of 22 mm I.D x 90 mm
chamber size made with ultra strength alloy
• Operation temperature within 10°C - 40°C
• A plastic protection cover is included
RM 36,640
Chamber: 278 MPa
Hydraulic: 20 T
440 x 430 x 560 • 30 mm I.D x 90 mm chamber size made with ultra
strength alloy
• Operation temperature within 10°C - 40°C
• A plastic protection cover is included
RM 53,460
Chamber: 250 MPa
Hydraulic: 50 T
450 x 420 x
1010
KGC RESOURCES
• 50 mm I.D x 150 mm chamber size made with ultra
strength alloy
• Operation temperature within 10°C - 40°C
• A plastic protection cover is included
• Excellent tool for preparing high density ceramic rod,
disk or target
RM 111,890
MTI
USA
LABORATORY ROLLER
MSK-HRP-MR100A
MSK-HRP-01
4” Hot Rolling Press
• 100 mm Dia. x 100mm width
Rollers made from hardened
tool steel HRC60-62
• Dual micrometer for accurate
thickness adjustment in the
range 0 - 1.8 mm
• Constant Rolling Speed: 65
mm / second
• Max heating temperature:
125°C
• 100 mm Dia. x 100mm width
Rollers made from hardened
tool steel HRC60-62
• Calendering thickness in the
range 0 - 1.2 mm adjustable
• Rolling speed 0 - 40mm /sec
adjustable
RM 23,380
RM 52,870
SPIN COATER
VTC-50
VTC-100A
VTC-200
Desktop Spin Coater with Complete
Accessories
Programmable Spin Coater with Vacuum
Chucks, Oilless Vacuum Pump & Accessories
Programmable Vacuum Chuck Spin Coater
with Complete Accessories
• 4” stainless steel spin plates are
included, which can hold one or multiple
samples by wax or double-sided tape
• The spinning speed is variable from
0-5100 rpm
• 20 ml syringe is included for liquid
injection with adjustable syringe holder that
can rotate freely along the support rod
• Liquid disk made of polypropelene to resist
most of corrosive solutions (1”, 2”, & 4”)
• The spinning speed is variable from 5008000 rpm with two programmable segments
• One oilless vacuum pump and one filter
are included
• 20ml syringe is used to contain the
coating material
• One 6” vacuum chuck is included for
holding 6” and 8” wafers
• 500 - 5000 rpm adjustable spinning speed
• Digital control panel with two
programmable segments of different spin
times and speeds
• 20ml syringe is used to contain the
coating material
RM 10,980
RM 19,980
RM 21,225
ADVANCE MATERIAL SCIENCE
4” Rolling Press with Dual
Micrometer
DIP COATER
PTL-MM01
PTL-MM02
PTL-200
Desktop Dip Coater with Variable Speed
Programmable Dip Coater with Digital Controller
PLC Controlled Dip Coater for Large Substrate
• Dipping speed is within 1-200 mm/mm
adjustable
• Dipping traveling within 0-200 mm
adjustable
• 150 ml solution container is included
• Sample weight less than 250g
• Dipping speed is within 1-200 mm/min
adjustable
• Dipping traveling within 0-75 mm
adjustable
• 150 ml solution container is included
• Sample weight less than 250g
• Coating samples with size up to 10” x 12”
• Pulling rate, immersion rate, dwell time
and cycling time are fully programmable
• 4 liter polypropylene tank is provided
• Max stroke length is up to 300 mm
• Max sample load is 7 kg
RM 15,750
PROMOTIONAL PRODUCTS CATALOG 2013
RM 24,085
RM 30,530
www.kgcresources.com | www.kgcscientific.com
13
MTI
USA
LABORATORY MILL
MSK-SFM-1
MSK-SFM-8
MSK-SFM-3
MSK-SFM-2
MSK-SFM-5
MSK-SFM-12M
Model
ADVANCE MATERIAL SCIENCE
MSK-SFM-1
MSK-SFM-2
MSK-SFM-3
MSK-SFM-5
MSK-SFM-7
MSK-SFM-8
MSK-SFM12M
14
Speed (rpm)
Dimension
L x W x H (mm)
Features
Price
Main plate:
30 -350
Mixing tank:
0 - 300
450 x 490 x 530 • Granularity can be as small as 0.1 micron
• Digital display speed in rpm
• Timer controls major platen’s running time from 1 - 999 min
• Timer control tank rotation time from clockwise to
anticlockwise direction from 1 - 99 min
• 4 alumina jars with various size of YSZ mill balls are included
RM 35,340
Main plate:
0 -100
Mixing tank:
60 - 700
450 x 490 x 530 • Granularity can be as smaller than 0.5 micron
• Three dimensions rotation: major platen, individual tank and
up-down gravity
• Digital display the speed of tank rotation in rpm
• Running time can be set from 1 - 999 min
• Four 1000 ml nylon jars, water-proof by rubber O-ring are
included
• Four sets of agate milling balls included (96 balls in total)
RM 21,057
1200
405 x 365 x 260 • Granularity can be as small as 0.1 micron
• Timing range from 0 - 120 min
• One 50 ml alumina jar with one set Zirconia mill balls are
included
RM 19,280
0 - 1200
320
Mortar:
0 -10
Pestle:
0 - 80
700 x 600 x
1100
• Granularity can be as small as 1 micron
• 5 liter stainless steel container with water cooling jacket
• Programmable controller to set time, speed and rotation
direction
330 x 300 x 530 • To produce coating slurry by mixing small batch of chemical
and compound under vacuum to remove gas bubble and protect
sample from oxidation
• Built in vacuum pump with -0.08 - 0.09 MPa
• Vibration plate frequency at 1 kHz
• One 150 ml stainless steel and one 500 ml aluminum
container are included
RM 17,080
240 x 240 x 500 • Granularity can be as small as nanometers
• 5” agate mortar and agate head pestle
• Grinding pressure is adjusted by spring
• Grinding time can be set according to using the automated
controller
RM 15,095
2700 - 4000 170 x 210 x 135 • 3 x 2.0ml tube can be loaded on the device simultaneously
• Timer can be set within 3 sec to 3 min
• Two types of Pure High Impact Zirconia Beads are included for
rapid milling
• The optimized mixing motion causes rapid milling through
constant high velocity impact from the hardened micro-beads
chosen
KGC RESOURCES
RM 17,718
RM 5,850
MTI
USA
VACUUM PEN
Model
EQ-SMT-72-ESD
Description
Features
• A compact and portable pick-up tool, which can move chip, crystal wafer and
components safely and easily
• Vacuum suction is generated by pressing and releasing the trigger
• Four suction cups in different sizes are included, which can meet various specific
requirements
• The pen body is made of ESD silicon Rubber to ensure operation safely and cleanly
Suction Cups
Diameter
Four different sizes which are 6.4 mm, 9.5 mm, 12.5 mm and 19 mm made from
conductive silicone material
Price
RM 150
ULTRASONIC CLEANER
Model
Inside Dimension
Volume
EQ-VGT-1613QTD
EQ-VGT-1620QTD
150 mm L x 140 mm W x 65 mm H
150 mm L x 140 mm W x 100 mm H
1300 ml
Ultrasonic Frequency
Ultrasonic Power
Features
Price
2000 ml
40 KHz
60 W
• 1-99 minutes adjustable, to accurately calculate second.
• Temperature setting: 20°C~80°C adjustable.
• Digital display, time, temperature at a glance.
RM 1,380
HANTECH
RM 1,958
ADVANCE MATERIAL SCIENCE
Anti-Static Electricity Vacuum Pen
KOREA
FURNACE
Box Furnace
Atmosphere Box Furnace
Atmosphere Box Furnace
C-14P
M-A15P
M-A1400
• Temp: Max 1000°C
• Volume: 3 liter
• Heater: Kanthal A1 Molding Heater
(Heated on three sides)
• Programmable PID controller
• Dimension: 300 x 460 x 390 mm
RM 4,850
PROMOTIONAL PRODUCTS CATALOG 2013
• Temp: Max 1100°C
• Volume: 4.5 liter
• Programmable PID controller
• Quartz tube: 50 (O.D)/46(I.D) x 300(L)
mm
• Dimension: 300 x 460 x 390 mm
RM 9,850
• Temp: Max 1400°C
• Volume: 1.5 liter
• Programmable PID controller
• Mullite tube: 53 (O.D)/45(I.D) x 300(L)
mm
• One side blocked type tube
• Heater: SiC Heater (U type)
• Gas mask, gas port, end mask
• Dimension: 430 x 670 x 460 mm
RM 19,780
www.kgcresources.com | www.kgcscientific.com
15
HARRICK PLASMA
USA
PLASMA CLEANER
HARRICK PLASMA Cleaner models are low-cost tabletop inductively coupled plasma devices that serve
as excellent tools for surface cleaning, surface preparation and surface modification. Plasma treatment
may be applied to a wide variety of materials, including metals, ceramics, composites, plastics,
polymers and biomaterials. They are specifically designed for laboratory, R&D and office use. They offer
inexpensive, compact functionality. Key applications areas include materials science, polymer science,
biomedical materials, sterilization of dental and medical implants and instruments, optical cleaning and
micro-fluidics.
ADVANCE MATERIAL SCIENCE
PDC-002
Expanded Plasma Cleaner
with PlasmaFlo
Basic Plasma Cleaner with
PlasmaFlo
PlasmaFlo Gas Flow Mixer
PDC-002
PDC-32G-2
PDC-FMG-2
• 6” diameter x 6.5” length
chamber
• Hinged door with magnetic
closure and
viewing window
• Fan cooling
• 3” diameter x 6.5” length
chamber
• Removable front cover for
easy access
For fine control of process
gas, process gas mixing,
and monitoring of chamber
pressure
RF Power settings:
Low: 7.2 W
Medium: 10.2 W
High: 29.6 W
RF Power settings:
Low: 6.8 W
Medium: 10.5 W
High: 18 W
Dual gas inputs for
atmospheric air (0 psig)
• Flowmeter 1: 49 mL/min
maximum flowrate
• Flowmeter 2: 104 mL/min
maximum flowrate
±2% full scale accuracy
Input Power: 200 W
Input Power: 100 W
Thermocouple vacuum gauge
and digital meter (1 to 1999
mTorr pressure range)
Tray size: 5.5” x 6.5”
Dimensions: 11” H x 18” W
x 9” D
Weight: 45 lbs
Tray size: 2.75” x 6.5”
Dimensions: 8.5” H x 10” W x
8” D
Weight: 13 lbs
Dimensions: 8.5” H x 10” W
x 8” D
Weight: 7 lbs
PDC-32G-2
RM 44,850
RM 21,548
RM 15,780
PDC-FMG-2 Harrick Plasma Cleaner: Design specifically for laboratory usage
Plasma Cleaner with Tray Quartz Plasma Chamber
• Replacement for standard Pyrex chamber
• More stable material for long-term use
• Beneficial for processes that require extremely
clean processing conditions
PDC-00T: RM 10,490
PDC-32T: RM 6,480
Chambers & Trays 16
KGC RESOURCES
Quartz Sample Tray
Facilitates loading and unloading of small
samples and batch processing
• PDC-00T: 5.5” W x 6.5” L (for PDC-002)
• PDC-32T: 2.75” W x 6.5” L (for PDC-32G-2)
PDC-00T: RM 2,295
PDC-32T: RM 1,150
HARRICK PLASMA
USA
VACUUM PUMP
Vacuump Pump for Harrick Plasma Cleaner
Standard Vacuum Pump
Standard Service Pump
Features
• Uses standard hydrocarbon pump oil
• Suitable for pumping nonreactive gas
• Suitable for concentrated oxygen and nonreactive gases
• No hydrocarbon oil used
Model
PDC-VP-2
PDC-OPF-2
Quality
Premium
PDC-VPE-2
PDC-OPD-2
PDC-OPE-2
Basic
Fomblin-Based
Oxygen
Dry Oxygen
Economy Dry
Oxygen
3.3/3.9 m3/hr
4.8/6 m3/hr
3.3/3.9 m3/hr
4.8/6 m3/hr
3.0/3.6 m3/hr
Ultimate Total Pressure
(gas ballast closed)
1.5 mTorr
7.5 mTorr
1.5 mTorr
53/45 mTorr
250 mTorr
Ultimate Total Pressure
(gas ballast open)
23 mTorr
150 mTorr
90 mTorr
263/225 mTorr
-
Motor Power
250/300 W
373 W
250/300 W
250/300 W
120 W
Price
RM 15,780
RM 9,290
RM 20,880
RM 26,750
RM 19,508
Pumping Speed
CORDOUAN TECH
FRANCE
GRANULOMETER
CORDOUAN TECHNOLOGIES offers leading VASCO serial
instrumentation for all types of particle size analysis and
characterization from the nanometer up to few microns. Measurement
of particle size distribution is routinely carried out across a wide range
of industries and academics research. Nanoparticle size distribution
is often a critical parameter in the manufacture of many products
from the advanced research up to the end product.
ADVANCE MATERIAL SCIENCE
Types
Based on a patented innovative technology developed by the French
Institute of Petroleum (IFP), the VASCO particle size analyzer is a
unique instrument for micro to nano particle size measurements
in dispersions. The measurement principle is based on Photon
Correlation Spectroscopy (PCS) of the back scattered light.
Model
Particle Size Range (nm)
VASCO-1
VASCO-2
10 to 6000
VASCO-3
2 to 6000
1 to 6000
Sample Concentration Range
0.01% to 40%
0.001% to 40%
0.0003% to 40%
Photon Counting Unit
PM (Photomultiplier)
PM (Photomultiplier)
APD (Avalanche
Photodiode)
Sample Setting Temperature
Fixed at 20°C
+15 to +70°C
+15 to +70°C
Laser Diode Characteristic
685 nm/15 mW
658 nm/75 mW
658 nm75 mW
Reproducibility/repeatibility
Better than 5%
Analysis Software
REAN performs multi-acquisitions, size distribution simulation, kinetic size of aggregation
monitoring, features Cumulants, Contin and unique Padé-Laplace inversion algorithms
Measurement Time
30 sec to 5 min depending on sample and measurement settings
Sample Volume
min=50µL and max=5mL
Operating Temperature
+15 to 30°C
Warm Up Time
< 5 min
Suspending Fluid
Aqueous and Organic Solvents
Price
PROMOTIONAL PRODUCTS CATALOG 2013
RM 162,000
RM 210,000
RM 245,000
www.kgcresources.com | www.kgcscientific.com
17
IMR
USA
COMBUSTION GAS ANALYZER
The IMR1000 is a hand held pocket size stack gas analyzer for combustion tests on boilers, burners and etcetera.
General Features:
• Rugged plastic case with protective boot and magnet
• Fuel types to be analyzed are Natural Gas, Propane, Butane, LPG and Light Oil
• Parameters measured are Oxygen, Carbon Monoxide, Carbon Monoxide (ambient), Nitric Oxide and Flue-Gas
Temperature
• Calculated values are Combustion Efficiency, Excess Air, Carbon Dioxide and CO corrected to 0% O2
• Measuring units for the analyzer are ppm and mg/m3
• The analyzer operating condition is within 0 - 40°C, 10 - 90% RH, non-condensing
• Thermocouple Type K as gas sampling probe with (0.25” diameter, 9” length with 9 ft hose length
• Battery operated (4 x AA)
Model
IMR1000-3
OIL & GAS INSTRUMENTATION
Gas
Measurement
Price
• O2 : 0 -21% with resolution 0.1% / ±0.2%
• CO : 0 - 4000 ppm with resolution 1 ppm/±10 ppm < 100
ppm
• CO2 : 0 -30% with resolution 1.0%
• Efficiency: 0 - 99.9% with resolution 0.1%
• Excess Air : 0 - 250% with resolution 0.1%
• CO/CO2 : 0 - 0.999% with resolution 0.0001%
• NO : 1 ppm/±2 ppm < 30 ppm with resolution ±5 ppm >
30 ppm
RM 6,598
Model
General
Features
IMR1000-4
• O2 : 0 -21% with resolution 0.1% / ±0.2%
• CO : 0 - 4000 ppm with resolution 1 ppm/±10
ppm < 100 ppm
• CO2 : 0 -30% with resolution 1.0%
• Efficiency: 0 - 99.9% with resolution 0.1%
• Excess Air : 0 - 250% with resolution 0.1%
• CO/CO2 : 0 - 0.999% with resolution 0.0001%
RM 10,650
IMR2800 P
• Measures/calculates up to 8 gases
• 23 Fuels are programmed - 4 fuels are programmable
• Automatic zero calibration with integrated self-check program
• Unit selection : ppm - mg - mg(ref O2)
• Rechargeable battery with charger
• Dimensions of 200 x 45 x 90 mm
Gas
• O2, Oxygen 0-21%
Measurement • CO, Carbon monoxide 0 - 2000 ppm
• NO2, Nitrogen dioxide 0 - 200 ppm
• SO2, Sulfur dioxide 0 - 4000 ppm
• Draft - 40 to + 40 hPa
• Losses 0- 99.9%
Price
• CO2, Carbon dioxide 0-25% (calculation)
• NO, Nitrogen oxide 0 - 1000 ppm
• NOx, Nitrogen oxide 0 - 1200 ppm
• HC, Hydro Carbon 0- 100% LEL
• Lambda/excess air 0-999%
IMR2800 P
RM 27,340
HTA
ITALY
LIQUID AUTOSAMPLER
Model
Features
Price
18
KGC RESOURCES
HT300A
• 110 positions rotating tray for 2 or 2.5 ml vials
• Supports the use of 4 solvent vials of 10 ml each
• Can be controlled by keypad or by PC using software
• Hot and cold needle injections (Dual simultaneous injections)
• Small volume, Priority, Ambient headspace and Multi phase Sampling available
• Handle up to 100µL syringe volume
• Injection speed up to 100µL/sec
• Bubble elimination up to 15 pull up strokes
RM 34,000
GASTECH
AUSTRALIA
GASTECH’s new improved ToxiPro has three visual alarm windows for increased worker safety. Even better, each alarm window comes
standard with both high visibility yellow and red alarm LEDs. In a warning condition, the yellow lights will flash and the lights in all three
windows will chase. In a danger condition, the red LEDs will flash and the lights in all three windows will chase. lus, the improved ToxiPro
has an audible alarm that is 10% louder than previous models! It has many alarm features, including an optional vibrating alarm and sound
pattern and set points which are now fully user customizable.
General Features:
• Electrochemical toxic gas sensor or Galvanic oxygen sensor
• Loud two tone alarm rated at 100dB at 10 cm
• Stores latest 20 events, including sensor type, max reading, average reading, start time and stop time
• Continuous real-time gas readings, peak, STEL (if enabled), TWA (if enabled) and time of day readings
• Compact and rugged, clear polycarbonate with TPE overmold
• Automatic zero calibration with integrated self-check program
Toxic Gas- Single Gas Detector with Datalogging & Vibrating Alarm
Model
Description
Price
54-45-01VD
ToxiPro - Carbon Monoxide (CO)
RM 2,450
54-45-02VD
ToxiPro - Hydrogen Sulphide (H2S)
RM 2,450
54-45-03VD
ToxiPro - Sulphur Dioxide (SO2 range 0-100ppm)
RM 2,980
54-45-09VD
ToxiPro - Nitrogen Dioxide (NO2)
RM 3,185
54-45-10VD
ToxiPro - Hydrogen Cyanide (HCN)
RM 3,185
54-45-13VD
ToxiPro - Phosphine (PH3)
RM 3,185
54-45-18VD
ToxiPro - Chlorine (CL2 specific)
RM 3,185
54-45-19VD
ToxiPro - Carbon Monoxide (CO-H CO Minus)
RM 2,920
54-45-21VD
ToxiPro - Ammonia (NH3)
RM 2,980
54-45-90VD
ToxiPro - Oxygen (O2)
RM 2,680
BIOTECHNOLOGY & LIFE SCIENCE
SINGLE GAS DETECTOR
MULTI GAS DETECTOR
Real-time readings of up to four gases simultaneously, one button operation and calibration, easy to read LCD display, audible and visual
alarms, event logger, IrDA port, optional sample draw pump, rugged, compact and affordable - MultiPro Gas Detector. There are two optional
battery packs for user to choose which are rechargable Li-Ion version includes charger or Alkaline (3 AA) battery packs.
General Features:
• Meets IPX5 water standard
• Front-mounted LCD displays readings up to 4 sensor channels
• Loud warbling, two-tone alarm rated at 92 dBA at one foot
• True one-button operation including automatic calibration
• Polycarbonate case with overmolded rubber boot
• Automatic zero calibration with integrated self-check program
Multi-Pro Muti Gas Detector with Datalogging & Vibrating Alarm
Model
Description
Price
54-48-300ADY8
MultiPro Alkaline LEL/O2
RM 3,580
54-48-301ADY8
MultiPro Alkaline LEL / O2 / CO
RM 5,275
54-48-302ADY8
MultiPro, Alkaline LEL / O2 / H2S
RM 5,275
54-48-314ADY8
Multipro Alkaline LEL / O2 / CO / H2S (Duo-Tox)
RM 5,275
54-48-300NYD8
MultiPro Li-Ion LEL/O2
RM 5,750
54-48-301NYD8
MultiPro Li-Ion LEL / O2 / CO
RM 5,750
54-48-302NYD8
MultiPro Li-Ion LEL / O2 / H2S
RM 5,750
54-48-314NYD8
MultiPro Li-Ion LEL / O2 / CO / H2S (Duo-Tox)
RM 5,750
54-48-314NYDV8 MultiPro Li-Ion LEL / O2 / CO / H2S (Duo-Tox) : Value Pack
PROMOTIONAL PRODUCTS CATALOG 2013
RM 8,680
www.kgcresources.com | www.kgcscientific.com
19
BE MARUBISHI
JAPAN
BIOREACTOR - FERMENTOR
BE MARUBISHI’s Photo Bioreactor was especially designed for cultivation of
microalgae and callus. Fine bubbles from 30 micron stainless fiber filter creates
high gas transfer coefficient. The low shear stress homogenization system makes
vertical circulation flow minimalizing damage to cells. The highly effective lighting
system stimulates photosynthesis.
MDFT-N-5L
Bioneer - 5L
Model
BIOTECHNOLOGY & LIFE SCIENCE
Description
Bioneer - 5L
MDFT-N-5L
Automatic Laboratory Bioreactor – Fermentor Series
Vessel Type
Semi Automatic Fermentor- Biorector with Mono Mode
controller
Fermentor vessel made from Pyrex glass and SUS316L
Volume
Total: 5 liter (autoclavable use)
Working: Around 3.5 liter
Speed Range
100 - 800 rpm
Air Flow Rate
1 - 5 SL/min
Built-in Controller MDL-8C (Compact Multi-channel digital-indication/
Model
controller) for temperature,
pH, D.O., agitation speed
Features
• Top driving, mechanical-seal type
• RS-232C interface port
Price
Semi automatic for temperature and agitation speed
• Top driving, mechanical-seal type
RM 121,000
RM 39,000
Multi Channel Indicator Controller for pH, Dissolved Oxygen & Anti Foam
Model
MCI-6C
Features
• Measurement in ppm, mg/l or % saturation
• Two 0/4….20mA current output, galvanically isolated
• Password protection against accidental parameter change
• Pressure and Salinity input for automatic correction
• Pulse length or pulse frequency proportional control
• Integrated PI controller, pulse length or pulse frequency
• Two relay as limit contact with on/off delay timer
• One relay as alarm contact and one relay as wash contact
Price
20
KGC RESOURCES
RM 32,750
HEB
CHINA
HEB’s cylindrical glass reactor is an ideal device in synthetic chemical, biological, pharmaceutical and etcetera. Liquid circulation of hot,
cold or cryogenic can be filled into the jacket of the reactor. Substance reacts by stirring under normal or negative pressure in airproof glass
container. Reaction process can be watched clearly through crystal reaction flask. This equipment is very suitable in library experiment or
medium-production in modern biology and pharmacy. It is also applied in synthesizing materials in fine chemical industry.
HEB-2L
HEB-30L
HEB-50L
HEB-100L
General Features:
• Integrated jacket reaction flask has big caliber with good seal and high strength
• Professional PTFE cover supports high speed stirring in vacuum
• Three standard mouth can be used for multi-purpose according to customer needs. Standard fittings are charging cork, thermometer
tube and reflux condenser.
• Converting-frequency adjustable speed for AC motor with constant rotating speed, no brushless, no sparkle, safe, stable and can
continuously working for hours
• The glass is made from GG17 high quality silicone material which owns good chemical-physical attribute.
• Stainless steel frame which is fasten using three-joint hardware that will not shake when the user is running an experiment
• Basic standard components for each model installed by HEB to users are:
• LCD controller with consists of a speed and temperature display, speed control knob and power switch
• Actuator to stir substance which is an electric motor with a frequency converter and stirring rod
• Temperature sensor and vacuum gauge installed to observe the substance condition
• Condenser, receiving flask, constant pressure funnel, extract port, charging valve, discharging port, reflux, tray,
kettle neck, reactor lid, up lid, gimbal joint collection and jacketed glass vessel are common parts in assembling
jacketed glass reactor
Overall Dimension
LxWxH
Volume
Rotation Speed
Flask
Necks
Torque
Power
Price
HEB-1L
35 x 27 x 65 cm
1L
30 - 1300 rpm
4 pcs
2400 gcm
40 W
RM 4,360
HEB-2L
43 x 35 x 100 cm
2L
100 - 1300 rpm
4 pcs
5000 gcm
90 W
RM 4,422
HEB-3L
50 x 38 x 95 cm
3L
0 - 1300 rpm
4 pcs
5000 gcm
90 W
RM 5,280
HEB-5L
50 x 38 x 105 cm
5L
30 - 1300 rpm
5 pcs
5000 gcm
120 W
RM 5,940
HEB-10L
57 x 57 x 180 cm
10 L
0 - 1300 rpm
5 pcs
7200 gcm
120 W
RM 9,980
HEB-20L
61 x 41 x 180 cm
20 L
50 - 900 rpm
5 pcs
15000 gcm
180 W
RM 12,580
HEB-30L
100 x 105 x 240 cm
30 L
50 - 900 rpm
5 pcs
15000 gcm
250 W
RM 14,450
HEB-50L
100 X 150 X 240 cm
50 L
50 - 900 rpm
5 pcs
22000 gcm
370 W
RM 15,980
HEB-80L
56 x 74 x 267 cm
80 L
0 - 500 rpm
5 or 6 pcs
22000 gcm
370 W
RM 23,760
HEB-100L
88 x 65 x 280 cm
100 L
50 - 900 rpm
5 or 6 pcs
22000 gcm
370 W
RM 28,580
Model
PROMOTIONAL PRODUCTS CATALOG 2013
www.kgcresources.com | www.kgcscientific.com
BIOTECHNOLOGY & LIFE SCIENCE
JACKETED GLASS REACTOR
21
BNF KOREA
KOREA
STOMACHER
BNF KOREA’s Stomacher is the ideal choice for microbial extraction with easy steps of operation. This process has been found useful
with a wide variety of samples, particularly: solid and semi-solid products, fresh and processed meat, dry fruits, cereals, grains, seeds,
cheese, cosmetics, pharmaceutical products and specimen tissues. LED Embo Stomacher uses paddles to homogenize samples through a
combination of crushing and stirring forces in extracting more organisms into suspension than any other blending process.
BIOTECHNOLOGY & LIFE SCIENCE
Model
LED Embo Stomacher
Description
Laboratory homogenizer that combines a number of international patents in homogenizing samples
Features
• Bench top size: 440 mm L x 280 mm W x 260 mm H
• Sample capacity up to 400 ml
• Paddle speed ranges from 50 - 200 rpm
• Paddle distance is adjustable to handle various sample size
• LCD control panel for monitoring operating condition, speed, time with alarm function
• Door sensor function for safety operation with reinforced glass observation window
• Embossing patterns of paddles for detailed crushing
Operating Condition
Operating Power : 220 VAC 60Hz
Operating Temperature : 0°C - 40°C
Storing Temperature : 0°C - 50°C
Operating Humidity : 35 - 85%RH
Power Consumption : 3.6 VA
Price
RM 9,360
HYSC
KOREA
COLONY COUNTER
Model
Description
Digital Colony Counter
Features
• 4 digits LED digital display with buzzer sounds for every counting
• 2 counters mode by using button and a marking pen
• Wider view using 125 mm wide lens.
• Bacteria can be counted by picking with stainless needle point pen
• 5” Magnifier, Power Cord, 100 mm Dish Holder, Stainless Needle
Point Pen and Marking Pen Probe are included
Specification
Petri Dish Holder : Accepts 100 mm dish (removable) and 150 mm (fixed)
Ilumination : Fluorescent lamp
Dimensions: 310 mm L x 290 mm W x 100 mm H
Mode of Counting
After cultivating bacteria such as colon
bacilli, it counts the number of bacteria. It is
very useful lab equipment for physiological Price
research, hospital clinical diagnosis.
22
KGC RESOURCES
HYC-560
• Manual push button counting
• Needle-point probing
• Marking pen probing
RM 1,720
QUANTEK INSTRUMENTS
USA
Model 901
Model 902D
Model 902P
Model 905
Model 907
Model 906
Model 901
Model 902D
Model 902P
Headspace Oxygen Analyzer
Headspace Oxygen/Carbon Dioxide Analyzer
Oxygen/Carbon Dioxide Analyzer
Primarily used for the measurement
of residual oxygen in gas-flushed food
packages
Primarily used for testing modified atmosphere
packages and other containers
Primarily used for research processes, gas
blending, biotech and other system
• Measuring range from 0.0 to 100% O2
• 0.1% O2 resolution
• Using proprietary electrochemical cell to
sense O2
• Internal pump that draws 5cc/sec with
2 - 12 sec adjustable timer
• Battery operated (Four ‘AA’ NiMH
rechargeable batteries)
• Dimension of 200 x 100 x 40 mm
• Included Consumables:
200 foam septas, 2 luer fit needles, 2
particulate filters, 2 liquid block filters
• Can be used for food analysis such as
meats, diary products, snack foods, baked
foods, prepared meals, coffee, pet food
and etcetera
• Miniature diaphragm pump with 5cc/sec
flow and 2 - 12 sec adjustable timer
• 12” length of double reinforced sample
prob with exhaust port vents to air
• Dimensions of 249 x 102 x 254 mm
• Can be used for food analysis such as
meats, diary products, snack foods, baked
foods, prepared meals, coffee, pet food and
etcetera
• Miniature diaphragm pump with 5cc/sec
flow and 2 - 12 sec adjustable timer
• Front panel fitting with luer connection for
disposable filter and exhaust port vents to
air or tube outlet for recirculation to close
system
• Dimensions of 249 x 102 x 254 mm
• Can be used in bioreactor systems, gas
blending systems, fruit storage areas,
fermentation, biofuel experiments, algae
offgas analysis and etcetera
Oxygen Channel
• Proprietary electrochemical cell as sensor
• O2 ranges from 0 - 100%
• 0.1% O2 resolution
Carbon Dioxide Channel
• Solid-state Infrared cell as sensor
• CO2 ranges from 0 -20% or 0 - 100%
RM 9,900
Oxygen Channel
• Proprietary electrochemical cell as sensor
• O2 ranges from 0 - 100%
• 0.1% O2 resolution
Carbon Dioxide Channel
• Solid-state Infrared cell as sensor
• CO2 ranges from 0 -20% or 0 - 100%
RM 15,350
RM 14,380
Model 905
Model 906
Headspace Oxygen Analyzer
Carbon Dioxide Analyzer for Process & Research Portable Oxygen/Carbon Dioxide Analyzer
Primarily used for the measurement
of residual oxygen in gas-flushed food
packages
Specifically designed for continuous or spot
check measurement of CO2 levels
Portable device that can be used for research
applications or package testing
• Measuring range from 0.0 to 100% O2
• 0.1% O2 resolution
• Proprietary electrochemical cell as sensor
• Internal pump that draws 5cc/sec with
2 - 12 sec adjustable timer
• Internal rechargeable 12 VDC battery
• Internal rechargeable 12 VDC battery
• Dimensions of 249 x 102 x 254 mm
200 foam septas, 2 luer fit needles, 2
particulate filters, 2 liquid block filters
• Can be used for food analysis such as
meats, diary products, snack foods, baked
foods, prepared meals, coffee, pet food
and etcetera
• CO2 ranges from 0.0 to 100%
(Other Ranges: 0 to 1%, 0 to 2.5%, 0 to
10%, 0 to 20%, 0-30%, 0-50%)
• Infrared (NDIR) as sensor; non depleting
wih no moving part
• Internal rechargeable 12 VDC battery
• Internal pump with on-off switch on front
panel that draws about 5 cc/sec
• Dimensions of 254 x 106 x 266.7 mm
• Male connectors, filters, T style connector,
inlet fitting, screwdriver, rubber washers, 60
cc syringe for sample injection and PTFE
.456 micron are provided
• Can be used in bioreactor systems, gas
blending systems, fruit storage areas,
fermentation, biofuel experiments, CO2
mitigation reseach and etcetera
• Miniature diaphragm pump with 5cc/sec
flow and 2 - 12 sec adjustable timer
• 12” length of double reinforced sample
prob with exhaust port vents to air
• Dimensions of 203 x 51 x 178 mm
• Can be used for food package applications
and reseach & industrial applications
RM 11,980
RM 11,980
RM 6,950
PROMOTIONAL PRODUCTS CATALOG 2013
BIOTECHNOLOGY & LIFE SCIENCE
O2 & CO2 ANALYZERS
Model 907
Oxygen Channel
• Proprietary electrochemical cell as sensor
• O2 ranges from 0 - 100%
• 0.1% O2 resolution
Carbon Dioxide Channel
• Solid-state Infrared cell as sensor
• CO2 ranges from 0 -20% or 0 - 100%
www.kgcresources.com | www.kgcscientific.com
23
NEW ERA
USA
SYRINGE PUMP
NE-1000
DUAL-NE-1000X
NE-300
NE-1600
NE-1002X
NE-9000
NEW ERA’s programmable syringe pumps provide an affordable solution
for the sophisticated dispensing and flow control applications. Features
include infusion and withdrawal, computer interface and advanced
programming option.
LABORATORY EQUIPMENT
NE-4000
Model
Description
NE-1000
The programmable syringe pumps can be applied in Chemistry, Tissue Engineering, Nanotechnology,
Electrospinning, Microfluids, Neuroscience, Biology and Physics.
Infusion Rates
Features
Single Syringe
Pump
0.73 µl/hr to 2100
ml/hr
(1 cc syringe to 60
cc syringe)
• Holds 1 syringe from the smallest size available up to 60 cc
• 35 lbs. at minimum speed, 18 lbs. at maximum speed
DUAL-NE1000X
Continuous Dual
Syringe Pump
System
0.73 µl/hr to 2100
ml/hr
(1 cc syringe to 60
cc syringe)
• Holds 1 syringe up to 60 cc for each syringe pump
• Allow continuous infusion or emulsification
• 35 lbs. at minimum speed, 18 lbs. at maximum speed
NE-1002X
Microfluid
Syringe Pump
0.008 nl/hr to 2545
µl/min
(0.5 ml syringe to 140
ml syringe)
• Holds 1 syringe up to 140 cc syringe but can only open up
to about 120 cc lengthwise
• Advance Per Step: 4.252232 Nanometers
• 100 lbs. at minimum speed, 18 lbs. at maximum speed
Six Channel
Syringe Pumps
0.452µl/hr to 1451
ml/hr
(1 cc syringe to 60
cc syringe)
• Holds 2, 4, or 6 syringes of up to 60 cc each
• 160 lbs. at minimum speed, 30 lbs. at maximum speed
Double Syringe
Pump
1.459 µl/hr to 7635
ml/hr
(1 cc syringe to 60
cc syringe)
• Hold 2 different syringes from the smallest size available up
to 60 cc each of variable sizes
• 100 lbs. at minimum speed, 18 lbs. at maximum speed
NE-1600
NE-4000
RM 4,800
RM 8,980
RM 8,320
RM 8,320
RM 5,950
The NE-1000 Family of Syringe Pumps Features:
• Built for automation
• Infuses and withdraws
• Applications range from simple infusions to complex pumping programs
• Operates stand-alone or from a computer with programmable preset protocols
• Program up to 41 pumping phases: change pumping rates, set dispensing volumes, insert pauses, control and respond to external
signals, sound the buzzer.
• RS-232 and TTL logic control interfaces
‘Just Infusion’ Syringe Pump
Peristaltic Dispensing Pump
NE-300
NE-9000
• Holds small or big syringes up to 60 ml
• Infuses continuously until the user stop the pump
• Variable infusion rate can be changed while pumping
• Power failure mode allows pump to continue pumping after a
reset
• Maximum pumping rate of 1568 ml/hr with a 60 ml syringe
• Does not withdraw, volume target or have computer interface
RM 2,230
24
Price
KGC RESOURCES
• Pump from a reservoir through replaceable continuous tubing
• Continuous pumping up to 900 ml/min
• Measured dispenses for production filling of bottles
• Learn and Repeat™ for quick setup of production dispenses
• Slow down mode to improve accuracy of dispenses
• Programmable Phases allowing complex pumping applications
and interaction with external devices
RM 3,580
NEW ERA
USA
HEATER-KIT-1LG
HEATER-PAD2-1LG
HEATER-KIT-1LG
The syringe heater constantly monitors and displays the temperature measured
on the primary heating pad. While regulating the temperature, the Heat Clamping
will hold the set temperature. Thermo-Kinetic Mode reduces temperature swings
and tightens the Heat Clamping at the set temperature by dynamically adjusting
the heating by reacting to changes in the temperature measurement and rate of
temperature change.
HEATER-PAD2-1LG
Syringe Heater Kit Control Unit
(Primary Heating Pad with Temperature
Sensor)
HEATER-PAD3-1LG
Secondary Heating Pad
Third+ Heating Pad
• Maximum temperature of 185°C
• User adjustable Thermo-Kinetic Heat Clamping for regulation of Set Point temperature
• RS-232 bidirectional control from a computer with built-in RS-232 network driver
• RS-232 network supports up to 100 heaters, pumps & other devices from one PC port
• Power Failure Mode: Restarts the heater Active Mode after a power interruption
• Selectable temperature units of Celsius or Fahrenheit
• Soft power switching for long life
• Non-volatile memory of all operating parameters
RM 1,980
RM 680
RM 680
Syringe pump & syringe are not included with syringe heater.
SYRINGE PUMP SOFTWARE
LABORATORY EQUIPMENT
SYRINGE HEATER
SyringePumpPro is an easy to use computer interface for programmable syringe pumps. It
permits faster programming and operation of one or more pumps. The user can configure
and control multi-pump protocols, log pump activity and send commands to selected
pumps.
Alternative license examples to purchase SyringePumpPro:
• Connecting 5 pumps to a single computer, at the same time, you will need one 5 pump license
• If you have 5 pumps connected one at a time, to one computer, a 1 pump license will do
• If you need to connect 5 single pumps to 5 separate computers, purchase five 1 pump licenses
Model
Description
Price
SYRINGE-PUMP-PRO-01
SyringePumpPro Software License for 1
RM 500
SYRINGE-PUMP-PRO-02
SyringePumpPro Software License for 2
RM 900
SYRINGE-PUMP-PRO-03
SyringePumpPro Software License for 3
RM 1,200
SYRINGE-PUMP-PRO-04
SyringePumpPro Software License for 4
RM 1,200
SYRINGE-PUMP-PRO-05
SyringePumpPro Software License for 5
RM 1,600
Flow rates vary with the selection of syringe and the type of motor
and gearing in the pump. The following are example flow rates for a
sample of syringes. Higher flow rates are available.
Syringe Size
PROMOTIONAL PRODUCTS CATALOG 2013
Maximum Rate
Minimum Rate
0.5 µl
25.49 µl/hr
0.001 µl/hr
1 ml
53.09 ml/hr
0.73 µl/hr
5 ml
406.1 ml/hr
5.581 µl/hr
10 ml
600 ml/hr
8.244 µl/hr
20 ml
975.8 ml/hr
13.41 µl/hr
30 ml
1282 ml/hr
17.63 µl/hr
60 ml
2120 ml/hr
29.13 µl/hr
www.kgcresources.com | www.kgcscientific.com
25
EBERBACH
USA
LAB SHAKERS
E6010
E5850
Model
E5850
E6000
E6010
LABORATORY EQUIPMENT
E6360
E6000
E6360
EBERBACH Reciprocating Lab
Shakers are known for their
durability, ease of use and ability
to mix solutions well. Eberbach
reciprocating Lab Shakers are built
for continuous duty with multiple
options available.
Description
Features
Price
Benchtop
Reciprocal Shaker
• Powered by a 1/17 hp Bodine DC motor which drives the platform through a filtered
SCR controller
• The speed is continuously variable between a range of 20 - 240 osc/min
• Shake a load of 40 lbs at low speed and 20 lbs at maximum
RM 12,278
Mid Range
Reciprocal Shaker
• Powered by a 1/6 hp GE split phase motor
• Speed control is continuously variable between a range of 60-260 osc/minute
• Max load carrying capacity of 50 lbs
RM 13,820
Fixed Speed
Reciprocal Shaker
• Powered by a 1/6 hp GE split phase motor
• A two-speed unit, operating at either 180 or 280 osc/minute (+/- 5 osc/min) and
controlled by a three position switch
• Max load carrying capacity of 40 lbs
RM 12,120
Hot Plate Shaker
• Powered by a 1/17 hp Bodine DC motor which drives the platform through a filtered
SCR controller
• The speed is continuously variable between a range of 20 - 240 osc/minutes
• The heater is controlled by a three position switch on the front of the shaker,
delivering 360 W at LOW position, 720 W at MEDIUM and 1440 W at HIGH
• Max load carrying capacity of 40 lbs
• Incorporates a 10”x16” aluminum hotplate within the box carrier
RM 22,920
E6700
EL680
Platform Rocker
Wrist Action Shaker
• For preparations requiring agitation
with minimal shear forces
• The 12”x12” platform has a
nonskid surface and rocks 15
degrees each side of horizontal
• The speed is adjustable between
5-50 cycles/min
• 60 min front panel timer provided
• Handle loads up to 10 lbs
• For extracting, dissolving and
emulsifying samples
• Mimics human wrist action:
from very slow, gentle mixing to
violent agitation
• This variable speed unit runs
from 100-960 oscillations per
minute
• Handle loads up to 9 lbs
RM 6,380
RM 13,650
BLENDERS
E8000
E8070
Waring Blender 4 Liter
Waring Blender 2 Liter
• Heavyduty 3 HP motor with three
running speeds of 16K, 18K, 20K
rpm and Pulse
• 4L working capacity stainless
steel container and stainless
steel blending assembly with high
performance ball bearings
• Heavy duty 1 HP motor that runs
at 2 run speeds: 19000 & 23000
rpm
• 2L working capacity stainless
steel container and 2 piece vinyl
lid
RM 11,286
26
KGC RESOURCES
RM 4,980
EBERBACH
USA
ELECTRO ANALYZER
Model
E1000
EBERBACH’s Electro-Analyzer
E1000 apparatus is the laboratory
standard for determinations
of lead, nickel, copper, zinc,
antimony, cadmium and other
metals by the electro-deposition
process. The front panel protects
the apparatus from corrosive
spillage and fumes. No electrically
corrodible components are
positioned where material may
fall into the cell and alter results.
Integral Stirrer
• 620 rpm fixed
• Adaptable for use with rotating anode
Size & Weight
Height: 29.5 in (75cm), Width: 15.25 in (38.7 cm); Depth: 16.5 in (42cm),
Weight: 78 lbs (35.5 kgs)
Accessories
• Heater, thermostatically controlled
• Adaptable for use with rotating anode
• Agitator
Platinum
Electrodes
Stationary Type
• Anode: Cylinder Diameter: 1”; Cylinder Height: 2 1/4”; Overall Height: 5 1/2”
Mesh: 45; Weight: 25 gm
• Cathode: Cylinder Diameter: 2”; Cylinder Height: 2 1/4”; Overall Height: 5 1/2”
Mesh: 45; Weight: 39.5 gm
Rotating Type
• Anode: Cylinder Diameter: 1/2”; Cylinder Height: 2”; Overall Height: 5”; Mesh:
45; Weight: 14 gm
Price
RM 45,780
VACUUMER
LABORATORY EQUIPMENT
DC Output
• Two position DC output
Characteristics • 0-10V, 0-10A at each position
• Polarity reversible
KOREA
VACUUM PUMP
VOP-60
Model
VOP-100
VOP-60
VOP-100
Ultimate Pressure (Pa)
Pumping Speed
Motor Power
VOP-150
100/120 l/m
150/180 l/m
200/240 l/m
200 W
400 W
550 W
550 W
1000
1100
1430/1730 rpm
COSMA-100
800
900
Suction Pipe (o.d x i.d)
KF25
Temperature Range
Dimension (wxdxh mm)
Price
-1
50/60 l/m
Recommended Oil
Weight
VOP-200
6.7x10 (6.7x10 )
-2
Motor Speed
Oil Capacity
VOP-200
VOP-150
7-40°C
17 kg
25 kg
28.5 kg
30 kg
165x411x234
171x464x238
189x504x253
189x524x253
RM 5,940
RM 6,534
RM 8,019
RM 8,613
VACUUMER’s Precision Vacuum Pumps are fine high-end vacuum pumps with gas ballast valve and oil back flow prevention mechanism
installed. They are also installed with over current protection and filter to prevent sludge contamination. Vacuumer’s Precision Vacuum Pump
are suitable in physical and chemical apparatus industries.
PROMOTIONAL PRODUCTS CATALOG 2013
www.kgcresources.com | www.kgcscientific.com
27
HAHN SHIN SCIENTIFIC
KOREA
ROTARY EVAPORATOR
HS-2005S-N
HS-2005V-N
Model
HS-2005S-N
HS-2000NS
HS-2005V-N
HS-2000NS
HS-2001NS
Dimension
(lxwxh mm)
730 x 410 x 630
620 x 410 x 870
320 x 730 x 520
320 x 580 x 720
Weight
19.5 kg
19.5 kg
16 kg
17 kg
Condenser
Slant type condenser
Vertical type condenser
Slant type condenser
Vertical type condenser
Speed
LABORATORY EQUIPMENT
HS-2001NS
20 - 280 rpm
Flask Capacity
6 different types of flasks are attachable (from 50 ml to 3000 ml)
Heater Power
1000 W
Bath Capacity
4.3 liter
Temperature
Ambient - 180°C
Features
• Digital control panel for temperature and speed
• If the amount of water goes down under the certain threshold in the heating bath, the system automatically turns off
its power for the safety purpose
• Included Water Bath HS-3001 with PTFE coating and double jacketed body
Price
RM 8,250
RM 8,580
RM 7,260
RM 7,920
WATER BATH
HS-3003
HS-3005N
Cold Trap Bath
Cooling Water Circulator Bath
• Consists up to 4 liter
• Dimension : 250 x 510 x 510 mm
• Glass type
• Temperature down to -40°C
• Refrigerator power: 1/3 HP
• Refrigerant: 134 A
• Using FND Controller
• Power consumption up to 334 W
• Applied when the cold trap needs to be
done in extremely low temperature
• Quick freezing sample for freeze-drying
and reaction stop of the enzyme
• Consists up to 4 liter
• Dimension: 250 x 510 x 510 mm
• Refrigerant: 134 A
• Using FND Controller
• Flow rate up to 15 liter/min
• Temperature down to -20°C
• Using FND Controller
• Power consumption up to 334 W
• Refrigerator power: 1/3 HP
• Refrigerant: 134 A
• Using FND Controller
• As a source of cooling to the the
rotary evaporator
RM 5,874
RM 5,220
ASPIRATOR
Model
Description
Electric Aspirator
Features
• Bath is made of polypropylene
• Pump capacity: 18 liter/min x 2EA and bath capacity: 8 liter
• Motor Power 150 W
• Dimension: 320 x 240 x 330 mm
Price
28
KGC RESOURCES
HS-3000
RM 2,150
SAMHEUNG ENERGY
KOREA
WATER BATH
SH-GWB11D
SH-GWB22D
• Capacity up to 6 liter
• Temperature ranges up to 99°C
• Timer: 0 - 99 hour 59 min
• Heating power up to 600 W
• Using Digital PID Controller
• Made from Stainless Steel SUS304
• External Dimension: 340 x 195 x 286 mm
• Internal Dimension: 300 x 155 x 170 mm
• Capacity up to 11 liter
• Temperature ranges up to 99°C
• Timer: 0 - 99 hour 59 min
• Heating power up to 1000 W
• Using Digital PID Controller
• Made from Stainless Steel SUS304
• External Dimension: 340 x 280 x 286 mm
• Internal Dimension: 300 x 240 x 170 mm
• Capacity up to 22 liter
• Temperature ranges up to 99°C
• Timer: 0 - 99 hour 59 min
• Heating power up to 2000 W
• Using Digital PID Controller
• Made from Stainless Steel SUS304
• External Dimension: 534 x 330 x 292 mm
• External Dimension: 500 x 295 x 170 mm
RM 1,780
RM 2,049
RM 3,247
General Water Bath
SH-GWB6-3
SH-GWB11-3
LABORATORY EQUIPMENT
SH-GWB6D
SH-GWB22-3
Three Holes Water Bath
• Capacity up to 6 liter x 3 ports
• Temperature ranges:
Low (5°C to 50°C)
Med (40°C to 70°C)
High (60°C to 99°C)
• Timer: 0 - 99 hour 59 min
• Heating power up to 1400 W
• Using Digital PID Controller
• Made from Stainless Steel SUS304
• Drain valve is installed
• External dimension: 690 x 470 x 360 mm
• Internal dimension: (155 x 300 x 150
mm) x 3 ports
• Capacity up to 11 liter x 3 ports
• Temperature ranges:
Low (5°C to 50°C)
Med (40°C to 70°C)
High (60°C to 99°C)
• Timer: 0 - 99 hour 59 min
• Heating power up to 2300 W
• Using Digital PID Controller
• Made from Stainless Steel SUS304
• Drain valve is installed
• External dimension: 960 x 470 x 360 mm
• Internal dimension: (240 x 300 x 150 mm)
x 3 ports
• Capacity up to 22 liter x 3 ports
• Temperature ranges:
Low (5°C to 50°C)
Med (40°C to 70°C)
High (60°C to 99°C)
• Timer: 0 - 99 hour 59 min
• Heating power up to 4500 W
• Using Digital PID Controller
• Made from Stainless Steel SUS304
• Drain valve is installed
• External dimension: 1050 x 670 x 360 mm
• Internal dimension: (259 x 500 x 150 mm)
x 3 ports
RM 6,662
RM 8,485
RM 10,305
PROMOTIONAL PRODUCTS CATALOG 2013
www.kgcresources.com | www.kgcscientific.com
29
HYSC
KOREA
WATER BATH
CWB-13M
CWB-20M
CWB-30M
Internal Dimension: 340 x 210 x 180 mm
Internal Dimension: 4000 x 250 x 200 mm
Internal Dimension: 450x 300 x 230 mm
Heating Power: 1500 W
Heating Power: 2000 W
Heating Power: 3000 W
LABORATORY EQUIPMENT
Cooling Bath
• Capacity up to 6 liter
• Temperature ranges from -10°C to 99°C
• Using Digital PID Controller with LED digital display
• Magnetic drive circulator pump with maximum flow rate 30 liter/min
• Refrigerator power: 1/2 HP
• Over temperature cut-off safety
• Internal material made from Stainless Steel SUS304
RM 8,824
RM 9,668
RM 15,780
SHAKER
SI-100A
SI-100R
SI-300R
SI-300RF
SI-64
SI-150
Shaking Incubator
• Temperature: 5°C
to 60°C
• No refrigerator
power
• Temperature: 0°C
to 60°C
• Refrigerator
power: 1/4 HP
• No light system
• Fluorescent light • Internal dimension:
system consists of 400 x 400 x 400
20 W
mm
• External
dimension: 470 x
580 x 400 mm
• Internal dimension: 530 x 560 x 380 mm • Internal dimension: 890 x 640 x 400
• External dimension: 590 x 850 x 825 mm mm
• Krypton light system consists of 60 W
• External dimension: 1120 x 720 x
890 mm
• Refrigerator power: 1/3 HP
• Temperature: 0°C to 60°C
• Internal dimension:
400 x 400 x 400 mm
• External dimension:
630 x 740 x 750 mm
• Door Safety
• Temperature: 5°C to 60°C
• Speed range from 20 - 300 rpm with shaking stroke of 20 mm orbital motion
• Internal material made from Stainless Steel SUS304
• Over temperature cut-off
• Using PID digital controller
RM 8,220
30
KGC RESOURCES
RM 9,680
RM 13,950
RM 14,980
RM 7,080
RM 7,920
HYSC
KOREA
Shaking Water Bath
SWB-25
Features
SWB-35
SWB-55
• Using Digital PID Controller with LED digital display
• Over temperature cut-off safety
• heating power up to 2300 W
• Temperature ranges from ambient 5°C to 100°C
• Internal material made from Stainless Steel SUS304
• Unique design multi rack separable
• Internal dimension: 500 x 300 x 240 mm
• External dimension: 730 x 360 x 400 mm
Price
RM 5,850
RM 6,580
RM 7,690
MTI
USA
ALUMINA CRUCIBLES
High purity alumina products can withstand very high temperature under reducing, inert or high vacuum condition. They remain good
chemical resistance under high temperatures, and have excellent wear and abrasion resistance. Alumina products can withstand up to
1750°C.
LABORATORY EQUIPMENT
Model
Alumina Crucible Low Form 99.6%
Model
Alumina Crucible
Low Form
Top diameter (mm) Bottom diameter (mm) Height (mm)
Capacity (ml)
Price
AL-1020
35
24
42
20
RM 31.00
AL-1050
48
30
54
50
RM 49.50
AL-1100
58
35
68
100
RM 66.00
AL-1150
66
40
80
150
RM 89.00
AL-1250
79
42
93
250
RM 108.00
AL-1500
100
60
110
500
RM 178.00
Alumina Crucible Low Form Lid
Model
Alumina Crucible
Lid
Top diameter (mm)
Capacity (ml)
Price
AL-1020-LID
35
20
RM 30.00
AL-1050-LID
48
50
RM 30.00
AL-1100-LID
58
100
RM 49.00
AL-1150-LID
66
150
RM 55.00
Alumina Crucible High Form
Model
Alumina Crucible
Low Form
Top diameter (mm)
Height (mm)
Capacity (ml)
Price
AL-2010A
25
25
10
RM 33.00
AL-2050A
45
35
50
RM 49.50
AL-2050B
40
45
50
RM 49.50
AL-2100
40
95
100
RM 66.00
AL-2250
60
100
250
RM 108.90
AL-2500
72
148
500
RM 174.90
PROMOTIONAL PRODUCTS CATALOG 2013
www.kgcresources.com | www.kgcscientific.com
31
MTI
USA
ALUMINA CRUCIBLES
Alumina Boat Rectangular 99.8%
Model
Alumina Boat
Rectangular
Length (mm)
Width (mm)
Height (mm)
Price
EQL54W38H20
54
38
20
RM 43.00
EQL82W42H23
82
42
23
RM 68.00
EQL50W40H20
50
40
20
RM 45.00
EQL50W20H20
50
20
20
RM 45.00
EQL82-W42H23
82
42
23
RM 43.00
EQL65W88H28
65
88
28
RM 89.00
EQL65W65H30
65
65
30
RM 89.00
EQL100W40H18
100
40
18
RM 68.00
EQL100W20H20
100
20
20
RM 68.00
EQL90W65H30
90
65
30
RM 89.00
EQL150W50H30
150
50
30
RM 275.00
EQL300W40H20
300
40
20
RM 395.00
Alumina Plate Rectangular 99.8%
LABORATORY EQUIPMENT
Model
Alumina Plates
Length (mm)
Width (mm)
Thickness (mm)
Price
AL-P220-220-6
220
220
6
RM 624.00
AL-P150-80-6
150
80
6
RM 226.00
AL-P102-25-6
102
25
6
RM 119.00
AL-P90-65-6
90
65
6
RM 119.00
GRAPHITE CRUCIBLE
Graphite crucible can withstand the high temperature, and has good resistance to chemical erosions and thermal shock. Especially
graphite crucible is ideal for the melting of aluminum, copper and other metals.
EQ-GR009G
EQ-G40
Graphite Crucible
Model
EQ-G40
EQ-GR009G
O.D.
1.5”
Top: 2.285”
Bottom: 1.81”
I.D.
1.25”
1.415”
Depth
3.75”
3.06”
Height
3.96”
3.435”
Temperature
399°C to 2760°C
Compressive
Strength
42.7 MPa
Price
32
KGC RESOURCES
RM 172.00
RM 147.50
MTI
USA
QUARTZ BOAT
EQ-QB-0210
EQ-QF-0806
EQ-QB-6025
Quartz boat is made from high purity quartz ( 4N purity) with 1200°C working temperature.
Model
Dimension
Features
Price
EQ-QB-0210
20 x 10 x 8 mm
Can fit in MTI GSL-1100X and OTF-1200X-S (1” O.D tube furnace)
RM 125
EQ-QB-1017
100 x 17 x 10 mm
Can fit in MTI GSL-1100X and OTF-1200X-S (1” O.D tube furnace)
RM 190
EQ-QB-1042
100 x 42 x 20 mm
Can fit in MTI 50 - 80 mm O.D tube furnace
RM 255
EQ-QB-1062
100 x 60 x 26 mm
Can fit in MTI OTF1200-80 tube furnace (3” - 80 mm O.D tube furnace)
RM 320
EQ-QB-3062
300 x 60 x 28 mm
Can fit in MTI OTF1200-80 tube furnace (3” - 80 mm O.D tube furnace)
RM 530
EQ-QB-4284
420 x 80 x 40 mm
Can fit in MTI OTF1200-100 tube furnace (1000 O.D tube furnace)
RM 705
EQ-QF-0806
218 x 162 x 50 mm
• Constructs a flat surface inside the processing tube where can put sample on
• Can be fit in MTI VBF-1200X-H8 Bench Top Vacuum Chamber Furnace
RM 5,820
EQ-QB-1025
Diffusion of 1” wafer
processing
• Design for diffusion, oxidation and annealing 1” Si wafer
• Can fit in MTI OTF-1200X-S50 tube furnace (2” tube furnace)
RM 1,360
EQ-QB-8025
Diffusion of 8” wafer
processing
• Can fit in MTI GSL1100X8 tube furnace
• Can carry 25 piece wafers of 8” diameter in each boat
RM 2,950
EQ-QB-2025
Diffusion of 2” wafer
processing
• Can carry 25 piece wafers of 2” diameter x 0.5 mm thickness in each boat
• Can fit in MTI OTF1200-3 tube furnace (3” tube furnace)
RM 1,520
EQ-QB-3025
Diffusion of 3” wafer
processing
• Can carry 25 piece wafers of 3” diameter x 0.5 mm thickness in each boat
• Can fit in MTI OTF1200-4 tube furnace
RM 1,520
EQ-QB-4025
Diffusion of 4” wafer
processing
• Can carry 25 piece wafers of 4” diameter x 0.5 mm thickness in each boat
• Can fit in MTI OTF1200X6 tube furnace
RM 1,750
EQ-QB-6025
Diffusion of 6” wafer
processing
• Can carry 25 piece wafers of 6” diameter in each boat
• Can fit in MTI GSL1100X8 tube furnace and Compact Vacuum Chamber
Furnace EQ-VBF-1200X
RM 2,350
Diffusion of 4”X 4”
wafer processing
• Can carry 25 piece wafers of 4” x 4” square x 0.5 mm thickness in each boat
• Can fit in MTI OTF-1200X-5L, VBF-1200X-H8, and OTF-1100X-8.5 tube
furnace
RM 2,950
EQ-QB-4025S
LABORATORY EQUIPMENT
EQ-QB-4025S
MORTAR & PESTLE
Agate Mortar & Pestle
Model
Outside diameter (mm)
Inside diameter (mm)
Size (inch)
Price
MTA-2
50
40
2
RM 126
MTA-3
75
60
3
RM 245
MTA-4
100
80
4
RM 585
MTA-5
125
110
5
RM 780
MTA-6
150
130
6
RM 1,080
MTA-7
175
160
7
RM 1,680
MTA-8
200
190
8
RM 2,780
PROMOTIONAL PRODUCTS CATALOG 2013
www.kgcresources.com | www.kgcscientific.com
33
SLI INSTRUMENTS
CHINA
OTHER EQUIPMENTS
SLI-DLC 80-2B
SLI-HSCT-H
Desktop Low Speed Centrifuge
Desktop High Speed Centrifuge Electronic Balance
pH Meter
• Speed up to 4000 rpm
• Capacity: 12 x 20 ml
• Timer: 0 to 30 minutes
• Dimension: 35 x 34 x 36 cm
• Speed up to 12000 rpm
• Digital control panel
• Timer: 99 hour 59 min
• Dimension: 50 x 44 x 33 cm
• pH range: 0.00 - 14.00
• Accuracy: +/- 0.05 pH
• Temperature: 5 - 60°C
• Resolution: 0.01 pH
6x50 ml:
RM 5,350
LABORATORY EQUIPMENT
RM 980
SLI-PHM-004
• Weight range: 0 - 1000 g
• Accuracy: 100 mg
• Pan size: 130 mm dia.
• Dimension: 21 x 16 x 5 cm
12 x 1.5 ml:
RM 3,480
RM 300
RM 980
SLI-HUC-1200H
SLI-BDO-35D
SLI-OOI-10A
SLI-DO-9055A
Desktop Ultrasonic Cleaner
Digital Laboratory Drying Oven
Dual Purpose Oven/Incubator
Force Air Convection Drying Oven
• Consists of 2 liter
• Ultrasonic Power: 50 W
• Frequency: 53 kHz
• Dimension:15 x 14 x 10 cm
• Timer: 1-99 min
• Power: 1200 W
• Temperature up to 250°C
• Dimension: 35 x 35 x 35 cm
• Power: 850 W
• Temperature up to 250°C
• Dimension: 25 x 26 x 25 cm
• Consists of 50 liter
• Power: 600 W
• Temperature up to 300°C
• Dimension: 42 x 39.5 x 35 cm
RM 1,100
RM 1,970
RM 3,200
RM 3,700
SLI-APG-100
SLI-SG-160
SLI-BLSJ-A4
High Speed All Purpose Grinder
Laboratory Grinder
Water Bath with Magnetic Stir Infrared Thermometer
• Speed up to 26000 rpm
• Mesh size: 40-200
•Weight: 3.5 kg
• Speed up to 5000 rpm
• Mesh Size: 40-120
• Weight: 58 kg
• Speed up to 1200 rpm
• Temperature up to 100°C
• Time range: 0 - 120 min
RM 850
RM 2,950
RM 2,950
SLI-IT-852B
SLI-IT-350
• Temperature • Temperature
ranges from
ranges from
-18°C to 650°C -50°C to 350°C
RM 350
RM 300
SLI-SAM-30C
SLI-IA-814
SLI-IA-6G
SLI-SR-110ATC
SLI-ECM-811ATC
SLI-S-212ATC
Soil Moisture Meter
Timber Moisture
Meter
Paper Moisture
Meter
Saccharometer
Emulsion
Concentrator Meter
Saltmeter
• Depth range: 2 - 30 cm
• Moisture range: • Moisture range:
5% - 40%
0% - 40%
• Accuracy: +/- 1% • Accuracy: +/- 1%
RM 650
34
SLI-EB-10001T
KGC RESOURCES
RM 120
RM 150
• Range: 0 - 5%
• Range: 0 - 15%
• Min value: 0.10% • Min value: 0.5%,
0 - 15%,0.5%
RM 350
RM 285
• Range: 0 - 28%
• Min value:
0.20%
RM 285
LJUHV
TAIWAN
In order to support our customer towards sophisticated research especially in the area of Nanomaterial, Semiconductor, MEMS, PV, LED,
Surface Acoustic Wave Technology, Thin Film Coating, and Ultra High Vacuum Technology; we are currently forming business alliance with
LJUHV in providing the technology know how and equipment for the above endeavor. Aside from the precision equipment, we are supplying
a complete line of pure material, compound, and substrate in various purity for completion of our equipments.
The customized systems are inclusive of: Pulse Laser Deposition Coating, Ultra High Vacuum Magnetron Sputtering, Continuous Vacuum
Magnetron Sputtering, Ion Sputtering, Electron Beam Evaporation, Thermal Evaporation with Plasma Assisted Vapor Deposition Equipment
and Induction Coupled Plasma.
Chamber
Pulse Laser
Deposition System
Sputter Cathode
Confocal Sputter
Single Target
PLD
Five
Confocal
Sputter
Cathode
Target
Manipulator
NANOMATERIAL & SEMICONDUCTOR
CUSTOMIZED SYSTEM
LJUHV CUSTOMIZED SYSTEM is complete with Human-Machine Interface (HMI) controller for user convenience in handling their system.
Confocal Sputter System
Plasma Enhanced Chemical Vapor
Deposition System
In Line Sputter System for Low E Glass Pilot Run
PROMOTIONAL PRODUCTS CATALOG 2013
Pulse Laser Deposition System
In Line Sputter System for CIGS Sola Cell
www.kgcresources.com | www.kgcscientific.com
35