Sharp 27R-FS1 Operating instructions

COLOR TELEVISION
MODEL
27R-FS1
L OPERATION MANUAL L
As an ENERGY STAR ® Partner, SHARP has determined that this product meets the
ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered
trademark.
CONTENTS
PAGE
• IMPORTANT INFORMATION/IMPORTANT
SAFEGUARDS ................................................ 2 ~ 10
• Supplied Accessories ............................................. 11
• Before Operating Your Television ........................... 11
• Antenna Connections ..................................... 11 ~ 12
• Quick Reference Control Operation ............... 13 ~ 15
• EZ SETUP during First Use ................................... 16
• Demo Mode ............................................................ 17
• Accessing the MAIN MENU screen without
Remote Control ...................................................... 18
• Language ............................................................... 18
• Sleep Timer ............................................................ 19
• Video Adjust ........................................................... 20
• Audio Adjust ................................................... 21 ~ 22
• Closed Caption ....................................................... 23
This operating manual includes basic operating
instructions in Spanish and French.
SPANISH is on page 5 ~ 7, 14, 53.
FRENCH is on page 8 ~ 10, 15.
01-02 27R-FS1.p65e
1
PAGE
• Parental Control ............................................. 24 ~ 34
V-CHIP ........................................................ 24 ~ 31
VIEW TIMER .............................................. 32 ~ 34
• Ch Setup ........................................................ 35 ~ 40
EZ Setup ............................................................. 35
Channel Setting .......................................... 36 ~ 38
Personal Preference ........................................... 39
Universal Plus Function ...................................... 40
• Set Up ............................................................ 41 ~ 42
Energy Save ....................................................... 41
Screen Format .................................................... 42
Auto Input ........................................................... 43
• Using the Video and Audio Input Jacks .......... 44 ~ 45
• Using the Audio Output Jacks ................................ 46
• Operation of Remote Control ......................... 47 ~ 51
• Before Calling for Service ............................... 52 ~ 53
• Calling for Service .......................................... 52 ~ 53
• Specifications ......................................................... 54
• Limited Warranty .................................................... 55
0081 SE 1
21/5/01, 5:48 PM
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television
– built for outstanding quality, reliability and performance.
Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed
through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you may adjust the picture and color to your personal viewing preference.
We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color
Television set for years to come.
Please read these instructions carefully, and keep them handy for your future reference.
IMPORTANT
To aid reporting in case of loss or theft, please record the TV’s
model and serial numbers in the space provided. The numbers
are located at the rear of the TV.
Model No.:
Serial No.:
IMPORTANT INFORMATION
There are two important reasons for prompt warranty registration of your new SHARP television set. Use
the REGISTRATION CARD packed in with the set.
FIRST – WARRANTY
This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor
warranty applicable to your purchase.
SECOND – CONSUMER PRODUCT SAFETY ACT
To assure that you will promptly receive any safety notification on inspection, modification or recall that
SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ
CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE ON THE LAST PAGE.
®
WHAT IS ENERGY STAR
TVs and VCRs use energy both when they are on and when they are off. Americans spend more than $1
billion a year on energy consumed by TVs and VCRs when they are not in use. The new ENERGY
STAR ® models will reduce that energy “leakage” by up to 75 percent. Ultimately, this will mean more than
$500 million a year in energy savings for consumers.
The energy savings will help reduce the burning of fossil fuels and the related carbon dioxide pollution
that contributes to global warming. If every American family replaced their TVs and VCRs with ENERGY
STAR ® models, it would reduce carbon dioxide emissions by five million tons every year — equivalent to
eliminating the pollution from more than one million cars.
®
By using ENERGY STAR products, you will save money on your electric bills and use less energy. That
makes good economic sense and it’s good for our environment.
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
WARNING: TO
EXPOSE THIS APPLIANCE TO WET LOCATIONS.
The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to
persons.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are
in the papers with the
appliance.
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention
to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.”
2
01-02 27R-FS1.p65e
2
21/5/01, 5:48 PM
IMPORTANT INFORMATION (Continued)
WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the user’s authority to operate this
equipment.
PRODUCT DISPOSAL
This product utilizes a Cathode Ray Tube (CRT) containing lead and tin lead solder.
Disposal of these materials may be regulated due to environment considerations. For disposal or
recycling information, please contact your local authorities or the Electronics Industries
Alliance:www.eiae.org
IMPORTANT SAFEGUARDS
CAUTION: Please read all of these instructions before you operate your television and save
these instructions for later use.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure
your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic
rules for its installation, use and servicing.
1.
Unplug this television equipment from the wall outlet before cleaning.
2.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3.
Do not use attachments not recommended by the television equipment manufacturer as they may cause
hazards.
4.
Do not use this television equipment near water — for example, near a bathtub, washbowl, kitchen sink or
laundry tub, in a wet basement, or near a swimming pool, etc.
5.
Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing
serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand
recommended by the manufacturer or sold with the television equipment.
6.
Television equipment and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart combination to
overturn.
7.
Wall or shelf mounting should follow the manufacturer’s instructions, and should use a
mounting kit approved by the manufacturer.
8.
Slots and openings in the cabinet and the back or bottom are provided for ventilation. To insure reliable
operation of the television equipment and to protect it from overheating, these openings must not be blocked
or covered. This television equipment should not be placed in a built-in insulation such as a bookcase
unless proper ventilation is provided.
9.
The openings should never be covered with a cloth or other material, and the bottom openings should not
be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television
equipment should never be placed near or over a radiator or heat register.
10. This television equipment should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult your television dealer or local
power company.
For television equipment designed to operate from battery power, refer to the operating instructions.
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger
than the other). The 2-wire polarized plug will fit only one way into the power outlet.
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and
defeat this safety feature.
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will
be abused by persons walking on it.
13. Follow all warnings and instructions marked on the television equipment.
3
03-04 27R-FS1.p65e
3
21/5/01, 5:49 PM
IMPORTANT SAFEGUARDS (Continued)
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up static charges. Section 810 of the
National Electrical Code provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
ACCORDING TO NATIONAL ELECTRICAL CODE.
ANTENNA LEAD-IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC PART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
15. For added protection for this television equipment during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This
will prevent damage to the equipment due to lightning and power-line surges.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the television equipment.
19. Do not attempt to service this television equipment yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the television equipment.
C. If the television equipment has been exposed to rain or water.
D. If the television equipment does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the television equipment to normal operation.
E. If the television equipment has been dropped or the cabinet has been damaged.
F. When the television equipment exhibits a distinct change in performance — this indicates a need
for service.
21. Upon completion of any service or repairs to this television equipment, ask the service technician to
perform routine safety checks to determine that the television is in safe operating condition.
22. When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
4
03-04 27R-FS1.p65e
4
21/5/01, 5:49 PM
(ESPAÑOL)
Lea estas instrucciones cuidadosamente y consérvelas a la mano para consultarlas en el futuro.
IMPORTANTE
Sírvase anotar el modelo del televisor y los números de serie
en el espacio provisto, para ayudar a reportar en caso de
pérdida o robo. Los números están ubicados en la parte
posterior del televisor.
N° de modelo :
N° de serie :
INFORMACIÓN IMPORTANTE
Existen dos razones importantes para registrar dentro del plazo límite la garantía de su nuevo televisor
SHARP, mediante la TARJETA DE REGISTRO incluida con el aparato.
PRIMERA – GARANTÍA
Garantiza al cliente la recepción inmediata de todas las prestaciones de consumidor en c’uanto a piezas,
servicio técnico y mano de obra aplicable a su adquisición.
SEGUNDA – ACTA DE SEGURIDAD DE PRODUCTOS DE CONSUMIDOR
Con el fin de garantizar al cliente la recepción puntual de cualquier notificación de seguridad sobre inspección,
modificación o cancelación que se le pueda solicitar a SHARP bajo el Acta de seguridad de productos de
consumidor de 1972. LEA CUIDADOSAMENTE LA CLÁUSULA “GARANTÍA LIMITADA” DE LA ÚLTIMA PÁGINA.
¿QUÉ ES ENERGY STAR ® ?
Los televisores y las videograbadoras utilizan energía cuando están encendidos ó apagados. Los
norteamericanos gastan más de 1 billón de dólares al año en la energía que consumen televisores y
videograbadoras cuando no se encuentran en uso. Los nuevos modelos ENERGY STAR ® reducen esa “fuga”
de energía hasta en un 75 por ciento. Esto implica más de 500 millones de dólares al año en ahorro de energía
para los consumidores.
El ahorro de energía ayuda a reducir el consumo de combustibles fósiles y por tanto la contaminación por
dióxido de carbono que contribuye al calentamiento global. Si cada familia norteamericana sustituyera sus
televisores y videograbadoras por modelos ENERGY STAR ®, se reducirían las emisiones de dióxido de carbono
en cinco millones de toneladas cada año (equivalente a eliminar la contaminación procedente de más de un
millón de automóviles).
El uso de productos ENERGY STAR ® permite reducir el monto de las facturas de energía eléctrica y consumir
menos energía. De este modo ahorrará dinero y ayudará a proteger el medio ambiente.
ADVERTENCIA :
PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA
ELÉCTRICA, NO EXPONGA ESTE APARATO A LA HUMEDAD.
El relámpago con cabeza de
flecha dentro de un triángulo trata
de indicar al usuario que las partes
dentro del producto representan
riesgo de electrochoque para las
personas.
PRECAUCIÓN : PARA REDUCIR EL RIESGO DE
DESCARGAS ELÉCTRICAS, NO RETIRE LA CUBIERTA
(NI EL PANEL POSTERIOR).
NO CONTIENE PIEZAS REPARABLES POR EL
USUARIO.
SOLICITE ASISTENCIA TÉCNICA A PERSONAL DE
SERVICIO TÉCNICO ESPECIALIZADO.
El signo de exclamación dentro de
un triángulo trata de indicar al
usuario que las instrucciones
importantes de operación y
servicio se encuentran en los
documentos con el aparato.
“Nota para el instalador del sistema de TV por cable: Esta nota tiene el propósito de llamar la atención del
instalador del sistema de cable acerca del Artículo 820-40 del Código Eléctrico Nacional, que contiene las
directrices para la puesta a tierra y, en particular, especifica que el cable de puesta a tierra debe estar
conectado al sistema de puesta a tierra del edificio lo más cerca a la entrada del cable.”
5
05-07 27R-FS1.p65e
5
21/5/01, 5:50 PM
INFORMACIÓN IMPORTANTE (Continuación)
ADVERTENCIA - Las Normas de la FCC establecen que cualquier cambio o modificación no autorizada que
se realice en este equipo y que no esté expresamente aprobado por el fabricante podría anular la autoridad
del usuario para utilizar este equipo.
DESECHO DEL PRODUCTO
Este producto utiliza un Tubo de rayos catódicos (TRC) que contiene soldadura de estaño y plomo.
El desecho de estos materiales deberá ser considerando regulaciones ambientales. Para obtener
información sobre el desecho o el reciclado, póngase en contacto con las autoridades locales o con
Electronics Industries Alliance: www.eiae.org
MEDIDAS DE SEGURIDAD IMPORTANTES
PRECAUCIÓN : Lea por favor todas estas instrucciones antes de poner en funcionamiento
su televisor, y guárdelas para poder utilizarlas en el futuro.
La energía eléctrica permite realizar muchas funciones útiles. Este aparato ha sido diseñado y fabricado para
garantizar su seguridad física. Sin embargo, UNA UTILIZACIÓN INAPROPIADA PODRÍA SER LA CAUSA DE
DESCARGAS ELÉCTRICAS O INCENDIOS. Para mantener el buen funcionamiento de este equipo y evitar
problemas, siga las normas básicas indicadas a continuación cuando lo instale, utilice o repare.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Desenchufe el televisor del tomacorriente antes de limpiarlo.
No utilice líquidos ni aerosoles de limpieza. Para limpiar el televisor utilice un paño húmedo.
No utilice accesorios que no los recomiende el fabricante del televisor porque podrían causar peligros.
No utilice el televisor cerca del agua – por ejemplo, cerca de una bañera, lavado, fregadero o lavadora, en
un sótano húmedo, cerca de una piscina, etc.
No utilice este televisor sobre un carrito, un soporte o una mesa inestables. El televisor podría caerse
causando serías heridas a niños o adultos, y, por supuesto, el aparato se estropearía. Ponga el televisor
solamente sobre un carrito o soporte recomendado por el fabricante, o vendido junto con
el televisor.
La combinación de carrito y televisor debe moverse con mucho cuidado. Las paradas
rápidas, la fuerza excesiva y las superficies irregulares pueden ser la causa de que la
combinación de televisor y carrito se volteen.
Cuando instale el televisor en una pared o en una estantería siga las instrucciones del
fabricante, y utilice el kit de montaje aprobado por el fabricante.
Las ranuras y aberturas de la caja y del panel posterior o inferior sirven para la ventilación del aparato,
para que éste funcione bien y para evitar que se caliente. Estas aberturas no deben taparse nunca. Este
televisor no debe colocarse en un lugar cerrado (como un estante para libros) si éste no dispone de la
ventilación apropiada.
Las aberturas no deben taparse nunca con un paño u otro material; y las aberturas del panel inferior no
deben taparse tampoco colocando el televisor sobre una cama, sofá, alfombra u otra superficie similar.
Este televisor no debe ponerse nunca cerca o encima de un radiador u otro aparato que produzca calor.
Este televisor sólo debe funcionar con la fuente de corriente indicada en la etiqueta del fabricante. Si no
está seguro acerca del tipo de corriente de su hogar, póngase en contacto con el concesionario de quien
adquirió el televisor o con la compañía eléctrica local.
En el caso de equipos de televisión diseñados para funcionar con baterías, consulte las instrucciones de
uso.
Como medida de seguridad, el equipo de televisión está equipado con un enchufe polarizado de dos hilos.
El enchufe polarizado de dos hilos solamente calza de una sola manera en el tomacorriente.
Si el enchufe no entra en el tomacorriente, pídale a un electrícista que le coloque un tomacorriente nuevo.
No modifique el enchufe porque anulará esta característica de seguridad.
No permita que se apoye nada sobre el cable de alimentación. No ponga este televisor donde el cable
pueda ser deformado por personas que caminen sobre él.
Cumpla con todos los avisos y las instrucciones marcados en el televisor.
6
05-07 27R-FS1.p65e
6
21/5/01, 5:50 PM
MEDIDAS DE SEGURIDAD IMPORTANTES (Continuación)
14.
Si hay una antena exterior conectada al televisor, asegúrese de que el sistema de antena está conectado
a tierra, para obtener así cierta protección contra la sobretensión y contra las cargas de electricidad
estática acumulada.
EJEMPLO DE CONEXIÓN A TIERRA DE UNA
ANTENA SEGÚN EL CÓDIGO ELÉCTRICO NACIONAL.
BAJADA DE ANTENA
ABRAZADERA PARA PUESTA A TIERRA
UNIDAD DE DESCARGA DE ANTENA
(SECCIÓN 810-20 DEL NEC)
EQUIPO DE
SERVICIO
ELÉCTRICO
CONDUCTORES DE PUESTA A TIERRA
(SECCIÓN 810-21 DEL NEC)
ABRAZADERAS PARA PUESTA A TIERRA
SISTEMA DE ELECTRODOS DE PUESTA A TIERRA DEL SERVICIO
ELÉCTRICO (PARTE 250. PARTE H DEL NEC)
NEC- NATIONAL ELECTRICAL CODE (CÓDIGO ELÉCTRICO NACIONAL)
15.
16.
17.
18.
19.
20.
21.
22.
Para proteger aún más este televisor durante tormentas eléctricas o cuando se deje sin atender y sin
utilizar durante largos periodos de tiempo, desenchufe el cable de alimentación del tomacorriente y
desconecte la antena. Esto evitará que el aparato pueda estropearse debido a los relámpagos y la
sobretensión en la línea de alimentación.
Un sistema de antena exterior no debe ubicarse cerca de líneas de alimentación elevadas, ni cerca de
luces eléctricas o circuitos de alimentación. Tampoco debe ubicarse donde pueda caer sobre tales
líneas o circuitos de alimentación. Cuando instale un sistema de antena exterior, tenga muchísimo
cuidado para no tocar las líneas o circuitos de alimentación porque el contacto podría causar un accidente
mortal.
No sobrecargue los tomacorrientes ni los cables de extensión porque esto podría causar un incendio o
descarga eléctrica.
No meta nunca ningún objeto en el interior del televisor porque podría tocar piezas con alta tensión o
causar un cortocircuito con otras piezas causando un incendio o descarga eléctrica. No derrame nunca
ningún tipo de líquido sobre el televisor.
No trate de reparar el televisor usted mismo porque al abrir o quitar las tapas podría exponerse a una
descarga de tensión u otros peligros. Las reparaciones debe realizarlas el personal de servicio
CALIFICADO.
Desenchufe este televisor del tomacorriente y solicite el servicio de un técnico calificado cuando se
produzcan las condiciones siguientes:
A. Cuando el cable de la alimentación o el enchufe estén estropeados.
B. Cuando haya derramado un líquido sobre el televisor.
C. Si el televisor ha quedado expuesto a la lluvia o al agua.
D. Si el televisor no funciona normalmente siguiendo las instrucciones de utilización. Ajuste solamente
los controles indicados en las instrucciones de utilización. Un ajuste inadecuado de otros controles
podría estropear el aparato y, entonces, sería necesario acudir a un técnico CALIFICADO para que
éste lo repare y lo devuelva a su condición normal.
E. Si el televisor se ha caído o la caja se ha estropeado.
F. Cuando las prestaciones del televisor cambien considerablemente será necesario llamar al servicio
de reparaciones.
Al finalizar cualquier servicio o reparación de este televisor, pida al técnico de servicio que realice
comprobaciones de seguridad rutinarias para determinar si el televisor puede funcionar sin causar
ningún problema.
Cuando sea necesario cambiar piezas, cerciórese de que el técnico de servicio utiliza las piezas de
CAMBIO especificadas por el fabricante, aquellas que tengan las mismas características que las piezas
originales. Las piezas de recambio no autorizadas pueden causar incendios, descargas eléctricas u
otros peligros.
7
05-07 27R-FS1.p65e
7
21/5/01, 5:50 PM
(FRANÇAIS)
Lisez attentivement ces instructions et gardez-les à proximité pour toute référence ultérieure.
IMPORTANT
Afin de vous aider en cas de perte ou de vol, inscrivez les
numéros de série et de modèle du téléviseur dans les
espaces fournis à cet effet. Ces numéros sont situés à
l’arrière du téléviseur.
N° du modèle :
N° de série :
INFORMATIONS IMPORTANTES
Deux raisons importantes d’enregistrer rapidement la garantie de votre nouveau téléviseur SHARP à
l’aide de la carte d’enregistrement (REGISTRATION CARD) incluse dans le colis :
LA PREMIERE – LA GARANTIE
Grâce à elle, vous obtiendrez immédiatement les avantages client concernant la garantie des pièces, du
service et des travaux applicable à votre achat.
LA DEUXIEME – LA LOI SUR LA SECURITE DU PRODUIT DE CONSOMMATION (CONSUMER
PRODUCT SAFETY ACT)
Grâce à elle, vous recevrez rapidement un avis de sécurité lors du contrôle, de la modification ou du rappel de votre
produit que SHARP peut être amené à fournir conformément à la loi de 1972 sur la sécurité du produit de consommation.
LISEZ ATTENTIVEMENT LE PARAGRAPHE «GARANTIE LIMITEE» DE LA DERNIÈRE PAGE.
ENERGY STAR ® : QU’EST-CE QUEC’EST
Les téléviseurs et les magnétoscopes utilisent de l’énergie lorsqu’ils sont allumés et éteints. Les Américains dépensent
plus d’1 milliard de dollars par an en énergie consommée par les téléviseurs et les magnétoscopes une fois éteints. Les
nouveaux modèles ENERGY STAR ® réduisent jusqu’à 75 % ce gaspillage d’énergie. Ce qui représente finalement
plus de 500 millions de dollars par an d’économie d’énergie pour les consommateurs.
Ces économies aident à réduire la combustion des énergies fossiles et la pollution au gaz carbonique associée, qui
contribue au réchauffement de la planète. Si toutes les familles américaines remplaçaient leurs téléviseurs et leurs
magnétoscopes par des modèles ENERGY STAR ®, les émissions de gaz carbonique seraient réduites de cinq millions
de tonnes par an — ce qui reviendrait à éliminer la pollution émise par plus d’un million de voitures.
En utilisant les produits ENERGY STAR ®, vous économiserez également de l’argent sur vos factures d’électricité et
vous utiliserez moins d’énergie. Un peu de bon sens économique au profit de notre environnement !
AVERTISSEMENT:
POUR REDUIRE LE RISQUE D’INCENDIE OU D’ELECTROCUTION,
N’EXPOSEZ PAS CET EQUIPEMENT A DES ENDROITS TRES HUMIDES.
Le symbole de la foudre sous
forme de flèche dans un triangle
est supposé indiquer à
l’utilisateur que les pièces
internes au produit constituent
un risque d’électrocution.
ATTENTION : POUR REDUIRE LE RISQUE
D’ELECTROCUTION,
NE RETIREZ PAS LE CAPOT (OU LE PANNEAU ARRIERE).
L’APPAREIL NE CONTIENT AUCUNE PIECE A ENTRETENIR
PAR L’UTILISATEUR.
CONSULTEZ UN PERSONNEL QUALIFIE POUR
LA MAINTENANCE.
Le symbole du point d’exclamation
dans un triangle est supposé
indiquer à l’utilisateur que des
instructions de fonctionnement et
de maintenance importantes se
trouvent dans la documentation
fournie avec l’équipement.
“Note à l’intention de l’installateur du système CATV : Ce rappel est fourni afin d’attirer l’attention de l’installateur
de système CATV sur l’article 820-40 du National Electrical Code qui indique les règles de mise à la terre
appropriée et, en particulier, spécifie que la ligne de terre doit être connectée au réseau commun de mise à
la terre du bâtiment, au point le plus proche possible de la source.”
8
08-10 27R-FS1.p65e
8
21/5/01, 5:52 PM
INFORMATIONS IMPORTANTES (suite)
AVERTISSEMENT - Les réglementations FCC établissent que des changements ou des modifications non
autorisés sur cet équipement et non approuvés expressément par le fabricant peuvent annuler tout pouvoir
de l’utilisateur sur le fonctionnement de cet équipement.
MISE AU REBUT DU PRODUIT
Ce produit utilise un tube à rayons cathodiques (TRC) contenant du plomb à braser et du brasage tendre.
La mise au rebut de ces matières peut être réglementée pour des raisons environnementales. Pour toute
information sur la mise au rebut ou le recyclage, contactez les autorités locales ou les précautions importantes
préconisées par la société Electronics Industries Alliance sur : www.eiae.org.
PRÉCAUTIONS IMPORTANTES
ATTENTION :
Veuillez lire toutes ces instructions avant d’utiliser votre télévision et conservezles pour un usage ultérieur.
L’énergie électrique peut exécuter de nombreuses fonctions utiles. Cet appareil a été conçu et fabriqué de
façon à garantir votre entière sécurité. CEPENDANT, TOUTE UTILISATION INADEQUATE PEUT ENTRAINER
DES RISQUES D’ELECTROCUTION OU D’INCENDIE. Afin de ne pas détruire les protections intégrées à cet
appareil, respectez les règles de base suivantes pour son installation, son utilisation et sa maintenance.
1.
Débranchez la télévision avant de la nettoyer.
2.
N’utilisez pas de nettoyants liquides ou d’aérosols et utilisez un chiffon humide.
3.
N’utilisez pas d’accessoires déconseillés par le fabricant de matériel vidéo, car ils impliquent des risques.
4.
N’utilisez pas cette télévision à proximité d’eau — par exemple, près d’une baignoire, d’un lavabo, d’un
évier ou d’un bac à laver, dans une cave humide ou près d’une piscine, etc.
5.
Ne placez pas cet équipement sur un chariot, un support ou une table instable. La télévision peut tomber
et provoquer de graves lésions à toute personne et causer de sérieux dommages à l’équipement. Utilisez
uniquement un support ou un chariot recommandé par le fabricant ou vendu avec la
télévision.
6.
L’ensemble télévision-chariot doit être déplacé délicatement. Les arrêts brusques, une
force excessive et des surfaces inégales peuvent renverser l’ensemble.
7.
L’installation au mur ou sur une tablette doit être réalisée conformément aux instructions
du fabricant et à l’aide d’un kit de montage approuvé par ce dernier.
8.
Les fentes et les ouvertures du châssis à l’arrière ou dans la partie inférieure sont prévus pour la ventilation.
Pour garantir un fonctionnement fiable de la télévision et pour la protéger de toute surchauffe, ces
ouvertures ne doivent être ni obturées, ni recouvertes. La télévision ne doit pas être placée dans un
endroit encastré tel qu’une bibliothèque, sauf si une ventilation adéquate est prévue.
9.
Les ouvertures ne doivent jamais être recouvertes par un chiffon ou autre et celles de la partie inférieure
ne doivent jamais être obturées si vous placez la télévision sur un lit, un sofa, un tapis ou toute surface
similaire. Cette télévision ne doit être placée ni à proximité d’un radiateur ou d’un registre de chaleur, ni
dessus.
10.
Cette télévision doit être alimentée uniquement par le type d’alimentation électrique indiqué sur l’étiquette.
Si vous n’êtes pas sûr du type d’alimentation de votre domicile, consultez votre revendeur de télévision
ou la compagnie d’électricité locale (EDF en France).
Pour la télévision conçue pour fonctionner sur batterie, reportez-vous au mode d’emploi.
11.
Du point de vue de la sécurité, la télévision est équipée d’une fiche polarisée à 2 fils (une lame plus
importante que l’autre). La fiche polarisée à 2 fils ne pénètre dans la prise électrique que dans un seul
sens.
Si la fiche ne correspond pas à la prise, demandez à votre électricien de remplacer la prise, elle doit être
obsolète. Ne modifiez pas la fiche et ne désactivez pas cette fonction de sécurité.
12.
Ne posez rien sur le cordon d’alimentation. Ne placez pas la télévision dans un emplacement où le
cordon d’alimentation est susceptible d’être endommagé par le passage répété de personnes.
13.
Respectez tous les avertissements et instructions mentionnés sur la télévision.
9
08-10 27R-FS1.p65e
9
21/5/01, 5:52 PM
PRÉCAUTIONS IMPORTANTES (suite)
14.
Si une antenne extérieure est raccordée à la télévision, veillez à ce que le système d’antenne soit relié à
la terre de façon à fournir une protection vis-à-vis des poussées de tension et des charges électrostatiques
accumulées. La section 810 du National Electrical Code fournit des informations relatives à une mise à la
terre correcte de la potence et de la structure portante, à une mise à la terre du fil d’entrée à une unité de
décharge d’antenne, aux dimensions des conducteurs de terre, à l’emplacement de l’unité de décharge
d’antenne, au raccordement des prises de terre ainsi qu’à leurs exigences.
EXEMPLE DE MISE A LA TERRE D’ANTENNE
CONFORME AU NATIONAL ELECTRICAL CODE.
FIL D’ENTREE D’ANTENNE
COLLIER DE MISE A LA TERRE
UNITE DE DECHARGE D’ANTENNE (NEC
SECTION 810-20)
EQUIPEMENT
DE SERVICE
ELECTRIQUE
CONDUCTEURS DE TERRE
(NEC SECTION 810-21)
COLLIERS DE MISE A LA TERRE
ALIMENTATION DU SYSTEME DE PRISE DE TERRE
(NEC PARAGRAPHE 250. PARARAGRAPHE H)
NEC- NATIONAL ELECTRICAL CODE
15.
Pour tout ajout de protection à votre télévision en cas de foudre ou lorsque elle reste en veille et inutilisée
pendant de longues périodes, débranchez-la et déconnectez l’antenne. Vous éviterez ainsi des dommages
à votre équipement suite à la foudre et des poussées de tension.
16.
Un système d’antenne extérieure ne doit pas être situé à proximité de lignes aériennes ou d’autres
groupes électrogènes ou circuits électriques ou dans des emplacements où l’antenne pourrait tomber
sur ce type de lignes ou circuits. Lors de l’installation d’un système d’antenne extérieure, faites extrêmement
attention à ne pas entrer en contact avec ces lignes ou circuits, car cela pourrait vous être fatal.
17.
Ne surchargez pas les prises et les prolongateurs de ligne afin d’éviter tout risque d’incendie ou
d’électrocution.
18.
N’introduisez jamais d’objets à travers les fentes du châssis, car ils pourraient entrer en contact avec des
points de tension dangereux ou des pièces court-circuitées et provoquer ainsi un incendie ou une
électrocution. Ne répandez jamais de liquides sur la télévision.
19.
N’essayez pas de réparer vous-même votre télévision. L’ouverture ou le retrait des capots peut vous
exposer à une tension dangereuse ou à d’autres risques. Confiez toutes les opérations de maintenance
à un personnel qualifié.
20.
Lorsque vous êtes confronté aux situations suivantes, débranchez la télévision et confiez toutes les
opérations de maintenance à un personnel qualifié :
A. lorsque le cordon d’alimentation ou la fiche est endommagé ou effiloché ;
B. si du liquide a été répandu sur/dans la télévision ;
C. si la télévision a été exposée à la pluie ou à l’eau ;
D. si la télévision ne fonctionne pas normalement même en respectant le mode d’emploi. Réglez
uniquement les commandes abordées par le mode d’emploi. Des réglages inappropriés d’autres
commandes peuvent occasionner des dommages et nécessiteront ensuite, dans la plupart des cas,
une intervention plus importante d’un technicien qualifié pour que la télévision fonctionne
normalement ;
E. si la télévision a été renversée ou que le châssis est endommagé ;
F. lorsque la télévision présente une altération visible des performances — cela indique un besoin de
maintenance.
21.
Pour toute maintenance ou réparation de la télévision, demandez au technicien de réaliser des contrôles
de sécurité classiques afin de déterminer si la télévision est en bon état de marche.
22.
Lorsqu’un remplacement de pièces se révèle nécessaire, veillez à ce que le technicien utilise des
pièces de rechange spécifiées par le fabricant et qu’elles aient les mêmes caractéristiques que la
pièce d’origine. Des remplacements non autorisés peuvent occasionner un incendie, une électrocution
ou d’autres risques.
10
08-10 27R-FS1.p65e
10
21/5/01, 5:52 PM
STOP
PAUSE
MENU
TV • CATV • VCR • DVD
CH/SKIP
TV
VCR
REC
PLAY
REW
FF
MUTE
DVD
VOL
+
D
CATV
CH
CH
VOL
—
9
C
B
A
PERSONAL PREFERENCE
6
100
ENTER
8
0
5
7
4
FLASHBACK
3
DVD
VCR
1
TV
POWER
DISPLAY
2
INPUT
Supplied Accessories
Infrared Remote Control/Part Number
RRMCG1626CESB
Size AA
Dry Batteries
Before Operating Your Television
Location
• For normal operation, your TV should be located in an area of the room where cool adequate ventilation
is provided. Do not place the back of the television set in a place where free airflow will be restricted.
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using
magnets or any other magnetic substance, such as iron are kept well away from the TV set.
Power
Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
Note:
• If the set will not be used for a long period, such as during a vacation, unplug the set from the wall
outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near
the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off
either the TV or the radio.
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to interference from the TV.
L Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Insert the batteries
Pull up
Battery
Cover
• With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two
batteries (size “AA”). Be sure to match the battery e/d terminals with the e/d marks inside the
compartment.
Antenna Connections
Antennas
• The antenna requirements for good color television reception are more important than those for
black & white television reception. For this reason, a good quality outdoor antenna is strongly
recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
11
11-12 27R-FS1.p65e
11
21/6/01, 4:25 pm
Antenna Connections (Continued)
F-type connector
1. A 75 ohm system is generally a round cable
with F-type connector that can easily be
attached to a terminal without tools (not
supplied).
75-ohm coaxial cable (round)
2. A 300 ohm system is a flat “twin-lead” cable
that can be attached to a 75 ohm terminal
through a 300-75 ohm ADAPTOR (not
supplied).
300-ohm twin-lead cable (flat)
OUTDOOR ANTENNA CONNECTION
• Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
• Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the
TV set.
A. Combination VHF/UHF Antennas
VHF/UHF ANTENNA
or
VHF/UHF ANTENNA
300/75-ohm
ADAPTOR
(Not supplied)
300-ohm
twin-lead
B. Separate VHF/UHF Antenna
REAR OF TV
VHF
UHF
ANTENNA ANTENNA
300-ohm
twin-lead
75-ohm
coaxial cable
COMBINER
300-ohm
twin-lead
(not supplied)
IN OUT
or
75-ohm coaxial
cable
REAR OF TV
CABLE TV (CATV) CONNECTION
• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber
by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s
channel keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/
descrambler using the converter’s channel keys.
RF switch (not supplied)
Two-set
A
signal
OUT
IN
splitter
Cable TV Line
B
(not
IN
OUT
supplied)
Cable TV converter/
descrambler
(not supplied)
Note:
• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that
might be required.
12
11-12 27R-FS1.p65e
12
21/5/01, 5:52 PM
Quick Reference Control Operation
L Location of Controls
(ENGLISH)
Front Panel
POWER
Press → On.
Press again → Off.
VIDEO/AUDIO IN 2 TERMINALS
SENSOR AREA FOR
REMOTE CONTROL
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
(INSIDE DOOR)
MENU.
Press → Accesses MAIN
MENU.
Press again → Exits MAIN
MENU.
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
Basic Remote Control Functions
Infrared Transmitter Window
POWER
Press → On.
Press again → Off.
DISPLAY
Press → Displays receiving channel for
four seconds.
Press again → Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
POWER
DVD
VCR
TV
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 39.)
DISPLAY
INPUT
1
2
3
4
5
6
7
8
9
INPUT
Press → Switch to external video
INPUT 1 mode.
Press 2 times → Switch to external video
INPUT 2 mode.
Press 3 times → Switch to external
video INPUT 3 mode or COMPONENT
mode.
Press 4 times → Switch back to the
original TV mode.
See page 45.
ENTER
FLASHBACK
0
100
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
In CATV/DVD position, sends power
and channel select commands to a
cable TV converter and DVD control.
MUTE
CATV
TV
DVD
VCR
REW
PLAY
FF
PAUSE
STOP
REC
CH/SKIP
TV • CATV • VCR • DVD
ENTER
Used in some instances where a Cable
Converter Box requires an “enter”
command after selecting channels,
when using the REMOTE KEYPAD
button. (See page 47)
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
• See pages 35 ~ 38 for channel
presetting.
• Moves the “ a ” mark of the MENU
screens.
MUTE
Press → Mutes sound.
Press again → Restores sound.
• CLOSED CAPTION appears when
sound is muted.
DVD/VCR CONTROL
See page 47.
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
13
13-15 27R-FS1.p65e
13
21/5/01, 5:53 PM
Referencia rápida de los controles de operación
L Ubicación de los controles
(ESPAÑOL)
Panel Delantero
ALIMENTACION (POWER)
Pulsando → Enciende (On).
Pulsando nuevamente →
Apaga (Off).
ZONA DEL SENSOR DEL
MANDO A DISTANCIA
AUMENTO/DISMINUCION
DEL VOLUMEN (VOL)
(+) Aumenta el sonido.
(–) Disminuye el sonido.
TERMINALES DE ENTRADA SVIDEO,VIDEO/AUDIO IN 2
(POR DENTRO DE
LA PUERTA)
CANAL SUPERIOR/INFERIOR (CH) – MENU
(8) Selecciona el siguiente canal superior.
(9) Selecciona el siguiente canal inferior.
MENU (MENU)
Pulsando → Accede al MENU
PRINCIPAL.
Pulsando nuevamente → Sale
del MENU PRINCIPAL.
Funciones Basicas Del Control Remoto
ALIMENTACION (POWER)
Pulsando → Enciende (On).
Pulsando nuevamente → Apaga (Off).
Ventanilla del transmisor de infrarrojos
TECLADO A DISTANCIA
(REMOTE KEYPAD)
Para tener acceso a cualquier
canal empleando las teclas.
VISUALIZACION (DISPLAY)
Pulsando → Aparece el canal de
recepción por cuatro segundos.
Pulsando nuevamente → Elimina la
visualización.
• En el modo de “Closed Caption” se
muestra el canal de recepción por un
corto tiempo.
POWER
DVD
VCR
TV
RETORNO AL CANAL
ANTERIOR (FLASHBACK)
Para volver al canal anterior.
PREFERENCIAS PERSONALES
Con los botones Personal Preference
puede programar sus programas favoritos
utilizando las cuatro categorías A, B, C y
D.
Puede acceder a los canales rápidamente
utilizando estos botones.
DISPLAY
INPUT
1
2
3
4
5
6
7
8
ENTRADA (INPUT)
Pulsando → Cambia al modo de entrada
1 del vídeo externo.
Pulsando 2 veces → Cambia al modo de
entrada 2 del vídeo externo.
Pulsando 3 veces → Cambia al modo de
entrada 3 del vídeo externo o al modo.
Pulsando 4 veces → Vuelve al modo TV
original.
9
ENTER
FLASHBACK
0
100
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
AUMENTO/DISMINUCION DEL
VOLUMEN (VOLUME UP/DOWN)
(+) Aumenta el sonido.
(–) Disminuye el sonido.
• En modo de MENU cambia o
selecciona el ajuste del televisor.
MENU
PREPARACION (MENU)
Pulsando → Accede al MENU
PRINCIPAL.
Pulsando nuevamente → Sale del
MENU PRINCIPAL.
CONMUTADOR SELECTOR DE
TELEVISOR/TV POR CABLE (TV-CATV)
En la posición TV, el mando envia los
comandos de alimentación y selección de
canales (botones de canal superior/inferior
y de acceso aleatorio) a un televisor.
En la posición CATV, envia los comandos
de alimentación y selección de canales
a un convertidor de TV por cable.
MUTE
CATV
TV
DVD
VCR
REW
PLAY
FF
PAUSE
STOP
REC
CH/SKIP
TV • CATV • VCR • DVD
INTRODUCIR (ENTER)
Se utiliza en algunos casos en los cuales
una Caja de Inversor de Cable requiere
una orden “enter” después de seleccionar
los canales, al usar el teclado a distancia.
CANAL SUPERIOR/INFERIOR
(CHANNEL UP/DOWN)
(8) Selecciona el siguiente canal superior.
(9) Selecciona el siguiente canal inferior.
• En el modo de MENU, mueve la marca
“ a ”.
SILENCIAMIENTO (MUTE)
Pulsando → Silencia el sonido.
Pulsando nuevamente → Restaura el
sonido.
• CLOSED CAPTION aparece automáticamente cuando el sonido es silenciado.
Siempre y cuando la transmisión tenga
esta señal.
CONTROLES DEL DVD/VIDEO
Nota:
• Los botones que arriba pueden verse sombreados en el Control Remoto lucen en la oscuridad. Para usar el visor
del control remoto que luce en la oscuridad, colocarlo bajo una luz fluorescente u otra fuente luminosa.
• El material fosforescente no contiene elementos radiactivos ni tóxicos, de modo que su uso no representa ningún
peligro.
• El grado de iluminación variará de acuerdo con la potencia de la luz utilizada.
• El grado de iluminación irá decayendo con el tiempo y dependiendo de la temperatura.
• El tiempo necesario para cargar el visor fosforescente variará de acuerdo con la iluminación circundante.
• La luz del sol y la luz fluorescente son las más eficaces para la carga del visor.
14
13-15 27R-FS1.p65e
14
21/5/01, 5:53 PM
Référence rapide sur les commandes
L Emplacement des touches
(FRANÇAIS)
Panneau Avant
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre
hors tension.
ZONE DE DETECTION
DU CAPTEUR
AUGMENTATION/RÉDUCTION
DU VOLUME SONORE (VOL)
(+) Pour augmenter le volume du
son.
(–) Pour diminuer le volume du
son.
PRISES D’ENTRÉE VIDÉO/
AUDIO IN 2
(DERRIERE LE VOLET)
TOUCHES DES CANAUX CROISSANT/
DÉCROISSANT (CH) – MENU
(8) Sélectionne le canal supérieur suivant.
(9) Sélectionne le canal inférieur précédent.
RÈGLAGE (MENU)
Appuyer pour mettre sous
tension.
Appuyer de nouveau pour
mettre hors tension.
Fonctions de base de la télécommande
Fenêtre d’émission du signal infrarouge
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre hors
tension.
AFFICHAGE (DISPLAY)
Appuyer pour afficher le canal reçu
pendant quatre secondes.
Appuyer de nouveau pour faire disparaître
le canal.
• Pour afficher temporairement le canal
reçu en mode Sous-titres.
POWER
DVD
VCR
TV
DISPLAY
INPUT
PAVE NUMERIQUE DE COMMANDE A
DISTANCE (REMOTE KEYPAD)
Sélectionne directement le canal voulu
sur le pavé numérique.
1
2
3
4
5
6
RETOUR (FLASHBACK)
Rappelle le canal regardé précédent.
7
8
9
ENTER
FLASHBACK
PREFERENCES PERSONNELLES
Grâce aux touches de préférence
personnelle, vous pouvez programmer
vos programmes préférés à l’aide des 4
catégories:
A, B, C et D. Ces touches vous permettent
d’accéder rapidement à ces canaux.
ENTRÉE (INPUT)
Appuyer pour sélectionner le mode
ENTRÉE 1 vidéo externe.
Appuyer 2 fois pour sélectionner le
mode ENTRÉE 2 vidéo externe.
Appuyer 3 fois pour sélectionner le mode
ENTRÉE 3 vidéo externe ou le mode
COMPOSANT.
Appuyer 4 fois pour revenir au mode TV initial.
0
100
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
AUGMENTATION/RÉDUCTION DU
VOLUME SONORE (VOLUME UP/DOWN)
(+) Pour augmenter le volume du son.
(–) Pour diminuer le volume du son.
• Pour changer ou sélectionner les
réglages du téléviseur en mode menu.
RÉGLAGE (MENU)
Appuyer → Accès au MENU PRINCIPAL.
Appuyer de nouveau → Sortie du MENU
PRINCIPAL.
SÉLECTEUR DE MODE DE
CÂBLOVISION/DVD-TÉLÉVISION/
MAGNÉTOSCOPE (CATV/DVD-TV/VCR)
En position télévision/magnétoscope
(TV/VCR), permet de mettre le téléviseur et
le magnétoscope sous/hors tension et de
sélectionner ses canaux (touche de canaux en
ordre croissant/décroissant et d’accès direct).
En position câblovision/DVD (CATV/DVD),
permet de mettre un convertisseur de téléviseur
par câble et un lecteur de DVD sous/hors
tension et de sélectionner ses canaux.
MUTE
CATV
TV
DVD
VCR
REW
PLAY
FF
PAUSE
STOP
REC
CH/SKIP
TV • CATV • VCR • DVD
ENTRER (ENTER)
Parfois utilisée lorsqu’un convertisseur
nécessite l’introduction d’une commande
“enter” après la sélection de canaux à
l’aide du pavé numérique de commande
à distance.
TOUCHES DES CANAUX CROISSANT/
DÉCROISSANT (CHANNEL UP/DOWN)
(8) Sélectionne le canal supérieur suivant.
(9) Sélectionne le canal inférieur précedént.
• Déplace le curseur “ a ” sur l’écran du
MENU.
SOURDINE (MUTE)
Appuyer → Mise en sourdine du son.
Appuyer de nouveau → Rétablissement
du son.
• CLOSED CAPTION apparaît lorsque le
son est mis en sourdine.
COMMANDE DU LECTEUR DE DVD/
MAGNÉTOSCOPE
Remarque:
• Les boutons ombrés de la télécommande illustrés ci-dessus brillent dans l’obscurité lorsque la télécommande a
été placée sous une ampoule fluorescente ou toute autre source lumineuse.
• Le matériau phosphorescent n’est absolument pas toxique ou radioactif. Il peut donc être utilisé en toute sécurité.
• Le degré d’illumination variera en fonction de l’intensité de la source d’éclairage.
• Le degré d’illumination diminuera avec le temps, en fonction de la température.
• Le temps requis pour charger les touches phosphorescentes dépendra de l’éclairage environnant.
• Les rayons directs du soleil et les luminaires fluorescents constituent les meilleures sources de chargement des
touches phosphorescentes.
15
13-15 27R-FS1.p65e
15
21/5/01, 5:53 PM
EZ SETUP during First Use
L When you turn on the TV for the first time, it will automatically
memorize the broadcast channels.
Please perform the following instructions before pressing the
power button.
(1) Insert the batteries into the remote control. (See page 11)
(2) Connect the antenna cable to the TV set. (See page 11 ~ 12)
(3) Plug in the AC POWER cord to the wall outlet.
POWER
POWER
TV
DVD
VCR
DISPLAY
INPUT
1
2
3
4
5
6
7
8
9
VOLUME
(+)/(–)
ENTER
FLASHBACK
0
100
PERSONAL PREFERENCE
A
B
C
D
CHANNEL
UP (8)/
DOWN (9)
CH
VOL
—
VOL
+
CH
MENU
1
Press the POWER button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE mode will be
displayed.
(Remote Control)
(On the Set)
POWER
TV
MUTE
SE L ECT
CATV
TV
DVD
VCR
MENU
L A NGU A G E
E NG L I S H
ESPA OL
F RANCA I S
S E L E C T : C H8 / 9
SET
: VO L + / —
(SELECT LANGUAGE mode)
2
Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”. Then press VOL (+) or
(–) to SET LANGUAGE.
CH
→
VOL
—
VOL
+
SE L ECT
L A NGU A G E
E NG L I S H
ESPA OL
F RANCA I S
S E L E C T : C H8 / 9
SET
: VO L + / —
CH
3
Press VOL (+) or (–) to access EZ SETUP mode.
CON N E C T
CA B L E
S T AR T
EZ
AN T ENNA
.
SE TUP ?
S T OP
VOL
—
OR
S TART
VOL
+
(EZ SETUP mode)
4
Press VOL (+).
The tuner will automatically search for the
broadcast and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press VOL (–) and it will be cancelled.
If you want to SETUP again, please refer to page
35 on SETUP.
To cancel EZ SETUP
Press VOL (–).
5
P L E A S E WA I T
AUTO
P R O G R AMM I N G
125
S T OP
VOL
+
Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
S T A RT
2
Note:
• If EZ SETUP does not memorize all the channels in your region, please refer to page 36 for more
information on manually memorizing the channels using CHANNEL SETTING.
• It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is
incorrect or frequency jamming is occuring around the area. Please refer to pages 36 ~ 38 for more
information on manually memorizing the channels using CHANNEL SETTING.
16
16-17 27R-FS1.p65e
16
22/5/01, 7:27 pm
Demo Mode
L Using the Remote Control
POWER
DVD
VCR
TV
DISPLAY
1
2
4
5
7
8
INPUT
3
6
9
ENTER
FLASHBACK
0
VOLUME
(+)/(–)
100
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
+
VOL
—
CH
MENU
MUTE
CATV
TV
DVD
VCR
CHANNEL
UP (8)/
DOWN (9)
MENU
1
2
Press MENU to access the MAIN MENU screen.
ME N U
Press CH UP (8) or DOWN (9) to move the “a” mark to “SETUP”.
→
CH
S L E E P T I ME R
V I D EO A D J US T
A UD I O A D J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
CH
(MAIN MENU screen)
3
Press VOL (+) or (–) to access SET UP mode, then press CH UP
(8) or DOWN (9) to move the “a” mark to “DEMO”.
VOL
—
VOL
+
→
CH
SETUP
L A N GU A G E
E N E RG Y S A V E
S C R E E N F ORMA T
DEMO
AUTO I NPUT
CH
(SET UP mode))
4
Press VOL (+) or (–) to select DEMO select mode.
D E MO : O F F
VOL
—
VOL
+
(DEMO select mode)
5
Press VOL (+) or (–) to select “ON”.
D E MO : ON
VOL
—
6
VOL
+
Press MENU to exit.
Example:
DEMO mode display
F r om SHARP M i nds
Come SHARP P r oducts
17
16-17 27R-FS1.p65e
17
21/5/01, 5:54 PM
Accessing the MAIN MENU screen without Remote Control
• If you misplaced your Remote Control you can still access most settings
via the MAIN MENU screen when you press MENU on the TV set.
• Some features of your TV set will not be accessible without the Remote
Control. If you lost your Remote Control, contact a Sharp Service Center
for a replacement.
(On the Set)
MENU
button
Language
L The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
L Setting the ON SCREEN DISPLAY Language.
1
Press MENU to access the MAIN MENU screen.
ME N U
S L E E P T I ME R
V I D EO A D J US T
A UD I O AD J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
(MAIN MENU screen)
2
Press CH UP (8) or DOWN (9) to move the “a” mark to “SET
UP”.
CH
CH
3
Press VOL (+) or (–) to access SET UP mode, then press CH UP
(8) or DOWN (9) to move the “a” mark to “LANGUAGE”.
VOL
—
VOL
+
→
CH
ME N U
S L E E P T I ME R
V I D EO A D J US T
A UD I O A D J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
SETUP
L A N GU A G E
E N E RG Y S A V E
S C R E E N F ORMA T
D EMO
AUTO I N PUT
CH
(SET UP mode)
4
Press VOL (+) or (–) to access LANGUAGE change mode.
L A NGU A G E
E NG L I S H
ESPA OL
F RANCA I S
VOL
—
VOL
+
(LANGUAGE change mode)
5
Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
I D I OMA
E NG L I S H
ESPA OL
F RANCA I S
CH
CH
6
Press MENU to exit.
18
18-20 27R-FS1.p65e
18
21/5/01, 5:54 PM
Sleep Timer
L You can preset your television to turn off automatically in increments of 30, 60, 90 or 120
minutes.
1
2
Press MENU to access the MAIN MENU screen.
ME N U
Press VOL (+) or (–) to access sleep timer mode.
→
VOL
—
VOL
+
S L E E P T I ME R
V I D EO A D J US T
A UD I O A D J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
(MAIN MENU screen)
3
Press VOL (+) or (–) to set a sleep time of 30, 60, 90 or 120
minutes.
VOL
—
S L EEP
T I ME R
1 2 0 M R EMA I N
VOL
+
(TIMER SET mode)
4
Press MENU to exit.
Note:
• To turn off the Sleep Timer, repeat the above SLEEP TIMER steps and select “– – – M REMAIN”
during step 3.
• While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular
intervals or when the remote’s Display key is pressed.
19
18-20 27R-FS1.p65e
19
21/5/01, 5:54 PM
Video Adjust
Description of Adjustment Items
POWER
DVD
VCR
TV
Selected
item
VOL UP (+) button
VOL DOWN (–) button
1
2
3
PICTURE
To increase contrast
To decrease contrast
4
5
6
TINT
To make skin tones greenish
To make skin tones purplish
7
8
COLOR
To increase color intensity
To decrease color intensity
BRIGHT
To increase brightness
To decrease brightness
DISPLAY
INPUT
9
ENTER
FLASHBACK
0
100
VOLUME
(+)/(–)
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
SHARP
To increase sharpness
COLOR
TEMP.
To choose a LOW, ML, MH or HIGH COLOR TONE.
VMS
This is used to emphasize the contour (and allows selection of
OFF, SOFT, STANDARD and HARD).
RESET
To return all adjustments to factory preset levels.
1
2
To decrease sharpness
VOL
+
CH
MENU
TV
DVD
VCR
CHANNEL
UP (8)/
DOWN (9)
MENU
Press MENU to access the MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “a” mark to
“VIDEO ADJUST”.
→
MUTE
CATV
CH
CH
ME N U
S L E E P T I ME R
V I D EO A D J US T
A UD I O A D J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
(MAIN MENU screen)
3
Press VOL (+) or (–) to access VIDEO ADJUST mode.
VOL
—
VOL
+
V I D EO A D J U S T
P I C T URE
T I NT
CO L OR
B R I G H T N ES S
SHARP
CO L O R T EM P .
VM S
RES E T
(VIDEO ADJUST mode)
4
5
Press CH UP (8) or DOWN (9) to move the “a” mark to “the
item (Ex. PICTURE)” you wish to adjust.
Press VOL (+) or (–) to access PICTURE adjust mode, then
press VOL (+) or (–) to adjust “PICTURE”.
CH
CH
P I C T URE
→
VOL
—
VOL
+
6
Repeat steps 4 to 5 to adjust other settings you wish to adjust.
7
Press MENU to exit.
•
60
VOL UP (+)
increase contrast
VOL DOWN (–)
decrease contrast
Note:
VIDEO ADJUST setting is available for AIR or CABLE/INPUT 1/INPUT 2/INPUT 3 and COMPONENT
respectively.
20
18-20 27R-FS1.p65e
20
21/5/01, 5:54 PM
Audio Adjust
L MTS (Multichannel TV Sound)
This circuit allows reception of stereo or bilingual TV sound.
L INTERNAL SPEAKER SWITCH
This function turns the TV’s internal speakers “ON” or “OFF” when listening to sound from
external speakers by using the AUDIO OUTPUT JACKS on page 46.
L FAO (Fixed Audio Output)
This function turns the TV’s internal speakers “OFF” and allows fixed audio output from the
AUDIO OUTPUT JACKS on page 46. With FAO, the TV’s volume control is disabled.
1
2
Press MENU to access the MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “a” mark to
“AUDIO ADJUST”.
CH
→
CH
ME N U
S L E E P T I ME R
V I D EO A D J U S T
A UD I O A D J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
(MAIN MENU screen)
3
4
Press VOL (+) or (–) to access AUDIO ADJUST mode.
A UD I O
Press CH UP (8) or DOWN (9) to move the “a” marks to
“MTS”, “SPEAKER” or “FAO”.
VOL
—
VOL
+
CH
→
CH
SE L ECT
MT S
SPEAKER
F AO
TREB L E
BASS
B A L A NC E
RE SE T
(AUDIO ADJUST mode)
5
Press VOL (+) or (–) to select “STEREO”, “SAP” or “MONO”
when the “a” mark is at “MTS” position.
MTS
STEREO
SPEAKER
ON
FAO
ON
SAP
OFF
OFF
VOL
—
VOL
+
MT S
(AUDIO ADJUST mode)
MONO
6
: S T EREO
Press MENU to exit.
Selected item
VOL UP (+) button
VOL DOWN (–) button
TREBLE
To increase treble response
To decrease treble response
BASS
To increase bass response
To decrease bass response
BALANCE
To emphasize the right speaker’s volume
To emphasize the left speaker’s volume
RESET
To return all adjustments to factory preset levels.
1
2
Press MENU to access the MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “a” mark to
“AUDIO ADJUST”.
→
CH
CH
ME N U
S L E E P T I ME R
V I D EO A D J U S T
A UD I O A D J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
(MAIN MENU screen)
21
21-22 27R-FS1.p65e
21
21/5/01, 5:55 PM
Audio Adjust (Continued)
3
Press VOL (+) or (–) to access AUDIO ADJUST mode.
Press CH UP (8) or DOWN (9) to move the “a” mark to
“TREBLE”, “BASS” or “BALANCE”.
VOL
—
VOL
+
CH
→
CH
4
Press CH UP (8) or DOWN (9) to move the “a” mark to “the
item (Ex. TREBLE)” you wish to adjust.
Press VOL (+) or (–) to access TREBLE adjust mode, then
press VOL (+) or (–) to adjust “TREBLE”.
CH
→
VOL
—
VOL
+
VOL
—
VOL
+
A UD I O
AD J US T
MT S
SPEAKER
F AO
TREB L E
BASS
B A L A NC E
RE SE T
(AUDIO ADJUST mode)
A UD I O
AD J US T
MT S
SPEAKER
F AO
TREB L E
BASS
B A L A NC E
RE SE T
CH
5
Press VOL (+) or (–) to adjust “TREBLE”.
TREB L E
03
VOL UP (+)
increase treble response
VOL DOWN (–)
decrease treble response
6
Repeat steps 4 to 5 to adjust other settings.
7
Press MENU to exit.
Ex: Actual screen indicating ON AIR when receiving STEREO
broadcasts
Actual channel number
“← ON AIR” will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts.
12
S T E R E O ON
SAP
ON
MO N O
AIR
AIR
(CHANNEL call on screen)
L You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.
• Stereo broadcasts
Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo sound.
• SAP broadcasts
Television broadcast can be received with either MAIN or SAP sound.
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)
L If stereo sound is difficult to hear.
• You can obtain clearer sound by manually switching to the fixed monaural mode.
Note:
• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
• Selecting MTS while in the INPUT mode does not change the type of sound; in this case, sound is
determined by the video source.
• If the “FAO” mode is selected “ON”, the “SPEAKER” mode will automatically turn “OFF”.
“SPEAKER” selecting will not affect “FAO” mode.
22
21-22 27R-FS1.p65e
22
22/5/01, 7:46 pm
Closed Caption
L HOW TO SET CLOSED CAPTION
• Your TV is equipped with an internal Closed Caption decoder. “Closed
Caption” is a system which allows you to view conversations, narration,
and sound effects in TV programs and home videos as subscript on
your TV screen as shown on the right.
• Not all the programs and videos will offer closed caption. Please look
for the “
” symbol to ensure that captions will be shown.
• Closed Caption broadcast can be viewed in two modes: CAPTION
and TEXT. For each mode, two channels are available, CH1 and CH2:
The [CAPTION] mode subscripts dialogues and commentaries of TV
dramas and news programs while allowing clear view of the picture.
The [TEXT] mode displays over the picture other various information
(such as TV program schedule, weather forecast, etc.) that is
independent of the TV programs.
1
2
Press MENU to access the MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “a” mark to
“CLOSED CAPTION”.
→
CH
CH
VOLUME
(+)/(–)
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CATV
TV
DVD
VCR
CHANNEL
UP (8)/
DOWN (9)
MENU
ME N U
S L E E P T I ME R
V I D EO A D J U S T
AUD I O AD J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E T UP
SE TUP
(MAIN MENU screen)
3
Press VOL (+) or (–) to access CLOSED CAPTION setting
mode.
C L O S E D C A P T I ON
MOD E
DA T A
VOL
—
: C A P T I ON
: CH 1
VOL
+
(CLOSED CAPTION setting mode)
4
Press CH UP (8) or DOWN (9) to move the “a” mark to either
“MODE” or “DATA”.
C L O S E D C A P T I ON
MOD E
DA T A
: C A P T I ON
: CH 1
CH
CH
5
Press VOL (+) or (–) to change the CLOSED CAPTION setting.
MODE :
CAPTION
DATA :
C L O S E D C A P T I ON
MOD E
DA T A
: C A P T I ON
: CH 1
CH 2
TEXT
OFF
6
CH 1
VOL
—
VOL
+
Press MENU to exit.
Note:
• If a broadcast has CLOSED CAPTION and the MUTE button is pressed, the set enters [CAPTION]
mode automatically. Pressing MUTE again will return the set to its previous condition.
• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor
or if there are problems at the broadcast source. This does not necessarily indicate a problem with
your TV.
• If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION
broadcast, the closed captions will disappear momentarily.
• When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen
may become dark and blank. Should this occur, set the Closed Caption mode to “OFF”.
23
23-25 27R-FS1.p65e
23
21/5/01, 5:56 PM
Parental Control (V-CHIP Operation)
L V-CHIP
• This function allows you to restrict TV programs and also allows you to control TV usage based on
FCC data. This function is to prevent your children from watching violence or sexual scenes that may
be harmful.
• Restriction of TV programs includes two characters that contain information about the program’s MPAA
rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted
by age and contents.
• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for
complete control.
[1] MPAA RATING
RATING
G
PG
age
base
GENERAL AUDIENCES. All ages admitted.
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for
children.
PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate
for children under 13.
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NO ONE 17 AND UNDER ADMITTED.
X Rating is an older rating that is unified with NC-17 but may be encoded on
older movie’s data.Note:
PG-13
R
NC-17
X
• MPAA RATING (Example)
Example 2.
“R” in the age based RATING is blocked, this will
automatically block the high rating “NC-17”, “X” also.
Example 1.
“PG-13” in the age based RATING is blocked, this
will automatically block the high ratings “R”, “NC17”, “X” also.
1. User setting
1. User setting
2. Block table
G
–––––
G
PG
–––––
PG
PG-13
BLOCK
R
BLOCK
NC-17
BLOCK
NC-17
X
BLOCK
X
age
base
PG-13
R
not to
block
not to
block
Select
block
autoblock
autoblock
autoblock
2. Block table
G
–––––
G
PG
–––––
PG-13
–––––
R
BLOCK
NC-17
BLOCK
NC-17
X
BLOCK
X
PG
age
base
PG-13
R
not to
block
not to
block
not to
block
Select
block
autoblock
autoblock
Note:
• MPAA RATING is only age based ratings.
[2] TV PARENTAL GUIDELINES
y
AGE
RATING
E
x
TV-Y (All children)
V
TV-Y7 (Direct to Older Children)
V
–
–
–
–
V
TV-G (General Audience)
V
–
–
–
–
–
V
V
V
V
V
–
TV-14 (Parents Strongly
Cautioned)
V
V
V
V
V
–
TV-MA (Mature Audience Only)
V
–
V
V
V
–
age TV-PG (Parental Guidance
base Suggested)
D
content base
D
L
S
V
FV
(Sexually
(Adult
(Sexual (Violence) (Fantasy
Suggestive Language) Situation)
Violence)
Dialog)
–
–
–
–
–
V : Content Rating can be set.
– : Content Rating can not be set (not normally broadcast by TV station).
24
23-25 27R-FS1.p65e
24
21/5/01, 5:56 PM
Parental Control (V-CHIP Operation Continued)
• TV-PARENTAL GUIDELINES (Example)
Example 1.1 : Age Based setting
Go through all select ratings and select unblocked for “AGE”.
This will automatically unblock everything.
A GE
TV – Y
TV – Y7
TV –G
T V – PG
TV – 1 4
T V – MA
RE T URN
D
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
–
FV
–
–
–
–
–
V : B L OC K
Example 1.2 : Age Based setting
For “TV-G” select “BLOCK” for “AGE”. This will automatically block
the higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as
“TV-G”.
Furthermore, the content ratings “D”, “L”, “S”, “V”, “FV” are
automatically blocked as well for “TV-PG”, “TV-14” and “TV-MA” as
well as “TV-G”.
Example 2.1 : Content Based setting
For “TV-PG”, “TV-14” and “TV-MA” select unblocked for each content
ratings (“D”, “L”, “S”, “V”, “FV”) by leaving “AGE” unblocked for “TVPG”, “TV-14” and “TV-MA”. If you choose to unblock for each one in
content base.
A GE
TV – Y
TV – Y7
TV –G
T V – PG
TV – 1 4
T V – MA
RE T URN
V
V
V
V
D
–
–
–
V
V
–
L
–
–
–
V
V
V
S
–
–
–
V
V
V
V
–
–
–
V
V
V
FV
–
–
–
–
–
V : B L OC K
A GE
TV – Y
TV – Y7
TV –G
T V – PG
TV – 1 4
T V – MA
RE T URN
D
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
–
FV
–
–
–
–
–
V : B L OC K
Example 2.2 : Content Based setting
Then for “TV-PG” and select “BLOCK” for only “V” (Violence). This
will automatically block the higher ratings “TV-14-V” and “TV-MAV” (“TV-14” and “TV-MA” for Violence content only).
Please note that with these settings blocking does NOT occur. If a
program is rated only “TV-MA”; it must be rated “TV-MA-V” to be
blocked.
Example 3 : Reset an Age Based setting
For “TV-14” and select again “BLOCK” for “AGE”.
This will again automatically block the content ratings “D”, “L”, “S”,
“V”, “FV” for “TV-MA” as well as “TV-14”.
Please note that the lower age rating “TV-PG” did not change from
its previous settings.
A GE
TV – Y
TV – Y7
TV –G
T V – PG
TV – 1 4
T V – MA
RE T URN
D
–
–
–
L
–
–
–
S
–
–
–
–
V
–
–
–
V
V
V
FV
–
–
–
–
–
V : B L OC K
A GE
D
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
V
V
V
–
V
V
V
V
V
V
TV – Y
TV – Y7
TV –G
T V – PG
TV – 1 4
T V – MA
RE T URN
FV
–
–
–
–
–
V : B L OC K
Note:
• Content ratings can be modified but only in the combinations indicated by an V in the table on page
24.
• Changing a lower age rating’s content setting to “BLOCK” automatically changes the same higher age
rating’s content setting to “BLOCK” regardless of their previous settings.
• Changing a lower rating’s “AGE” setting to “BLOCK” automatically changes all higher ratings to “BLOCK”
regardless of their previous settings.
• Any rating’s “AGE” set to unblocked must have its content settings individually set.
[3] ADDITIONAL MODE
Besides the above “MPAA RATINGS” and “TV PARENTAL GUIDELINES” new ratings system’s data
can be downloaded when they become available. (See page 28.)
25
23-25 27R-FS1.p65e
25
21/5/01, 5:56 PM
Parental Control (V-CHIP Operation Continued)
L HOW TO SET V-CHIP
1
2
3
4
5
6
7
8
FLASHBACK
9
ENTER
0
100
REMOTE
KEYPAD
VOLUME
(+)/(–)
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
[1] MPAA RATING
1
2
MUTE
CHANNEL
UP (8)/
DOWN (9)
MENU
Press MENU to access the MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “a” mark to
“PARENT CONTROL”.
CH
→
CH
ME N U
S L E E P T I ME R
V I D EO A D J US T
AUD I O AD J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
(MAIN MENU screen)
3
Press VOL (+) or (–) to access PARENT CONTROL mode,
then “PARENT CONTROL V-CHIP BLOCK” is displayed.
PARENT A L
CON T R O L
V - C H I P B L OC K
V I E W T I ME R
(PARENTAL CONTROL mode)
4
Press VOL (+) or (–) to access V-CHIP select mode, then press
VOL (+) or (–) to select “MPAA RATING”.
V – CH I P
B L OC K
MP A A
T V GU I D E L I N E S
O P T I ON
S ECRE T N o : – – – –
S T A TUS : OF F
VOL
—
VOL
+
(V-CHIP select mode)
5
Press CH UP (8) or DOWN (9) to move the “a” mark to "PG",
then press VOL (+) or (–) to select BLOCK. If you set “PG” to
BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically
blocked.
CH
→
VOL
—
VOL
+
MP A A
G
PG
PG – 1 3
R
NC – 1 7
X
RE T URN
:
:
:
:
:
:
– – – – –
B L OC K
B L OC K
B L OC K
B L OC K
B L OC K
:
:
:
:
:
:
–––– –
B L OC K
B L OC K
B L OC K
B L OC K
B L OC K
CH
6
Press CH UP (8) or DOWN (9) to move the “a” mark to
"RETURN", then press VOL (+) or (–) to exit V-CHIP select
mode.
CH
CH
→
VOL
—
VOL
+
MP A A
G
PG
PG – 1 3
R
NC – 1 7
X
RE T URN
Note:
Ex.
• If you set “G” to BLOCK , all RATING are automatically blocked.
• If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.
26
26-27 27R-FS1.p65e
26
21/5/01, 6:31 PM
Parental Control (V-CHIP Operation Continued)
[2] TV GUIDELINES
1
2
Repeat steps 1 to 4 of [1] MPAA RATING.
V – CH I P
Press CH UP (8) or DOWN (9) to move the “a” mark to “TV
GUIDELINES”.
CH
B L OC K
MP A A
T V GU I D E L I N E S
O P T I ON
S ECRE T N o : – – – –
S T A TUS : OF F
CH
3
Press VOL (+) or (–) to access TV GUIDELINES mode.
VOL
—
A GE
VOL
+
TV – Y
TV – Y7
TV –G
T V – PG
TV – 1 4
T V – MA
RE T URN
V
V
V
V
V
D
–
–
–
V
V
–
L
–
–
–
V
V
V
S
–
–
–
V
V
V
V
–
–
–
V
V
V
FV
–
V
–
–
–
–
V : B L OC K
(TV GUIDELINES mode)
4
To change CONTENT SETTING, press CH UP (8) or DOWN
(9) to move the “a” to the desired rating and then press VOL
(+) or (–) to select.
CH
CH
5
→
VOL
—
VOL
+
Press CH UP (8) or DOWN (9) to move the “a” to the desired
content and then press VOL (+) or (–) to select either “BLOCK”
or unblock (“– – – –”).
CH
CH
→
VOL
—
VOL
+
TV–Y7
:
:
:
:
:
:
A GE
D
L
S
V
FV
RE T URN
B L OC K
–––– –
–––– –
–––– –
–––– –
B L OC K
(CONTENT RATING mode)
6
Press CH UP (8) or DOWN (9) to move the “a” mark to
"RETURN", then press VOL (+) or (–) to return to TV
GUIDELINES mode.
CH
→
VOL
—
VOL
+
A GE
TV – Y
TV – Y7
TV –G
T V – PG
TV – 1 4
T V – MA
RE T URN
Repeat steps 4 to 5 until all ratings and their contents are set.
8
When done, press MENU to exit.
L
–
–
–
V
V
V
S
–
–
–
V
V
V
V
–
–
–
V
V
V
FV
–
–
–
–
–
V : B L OC K
CH
7
V
V
V
V
D
–
–
–
V
V
–
27
26-27 27R-FS1.p65e
27
21/5/01, 5:56 PM
Parent Control
Parental
Control
(V-CHIP
(V-CHIP
Operation
Operation
Continued
Continued)
)
[3] ADDITIONAL MODE (DOWNLOAD)
There will be an additional new rating system. In that case, please set up as follows.
Subsequently the new rating system will set up automatically.
1
2
Repeat steps 1 to 4 of [1] MPAA RATING.
V - CH I P
Press CH UP (8) or DOWN (9) to move the “a” mark to
“OPTION”.
CH
B L OC K
MP A A
T V GU I D E L I N E S
O P T I ON
S ECRE T N o : – – – –
S T A TUS : OF F
CH
(V-CHIP BLOCK select mode)
3
Press CH UP (8) or DOWN (9) to move the “a” mark to
“OPTION”, then press VOL (+) or (–) to “DOWNLOAD : ON”.
CH
CH
→
VOL
—
VOL
+
O P T I ON
CANAD I AN
CANAD I AN
E NG L I S H
F REN CH
DOWN L O A D : ON
RE T URN
(OPTION mode)
4
Press MENU to exit.
• DOWNLOAD V-CHIP DATA
1
2
3
4
5
6
7
8
9
ENTER
FLASHBACK
0
100
REMOTE
KEYPAD
VOLUME
(+)/(–)
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CHANNEL
UP (8)/
DOWN (9)
MENU
1
If you watch the program containing “New Rating System
Data”, the DOWNLOAD screen will be displayed.
P L E A S E WA I T
NOW D O W N L O A D I NG
V – CH I P D A T A
(DOWNLOAD screen)
2
The DOWNLOAD screen will disappear, once downloading
is finished.
Note:
• DOWNLOAD will not start, if you do not watch a program containing “New Rating System
Data”.
28
28-31 27R-FS1.p65e
28
21/5/01, 5:59 PM
Parental Control (V-CHIP Operation Continued)
• How to set ADDITIONAL MODE (Example)
1
2
Repeat steps 1 to 3 of [3] ADDITIONAL MODE.
O P T I ON
Press CH UP (8) or DOWN (9) to move the “a” mark to
“Cdn. English Ratings”, then press VOL (+) or (–).
CANAD I AN
CANAD I AN
CH
→
E NG L I S H
F REN CH
DOWN L O A D : ON
RE T URN
VOL
—
VOL
+
CH
(After download the rating
data)
3
You can select “BLOCK” or “– – – – –” (unblock) from each
RATING mode by pressing CH UP (8) or DOWN (9) and
VOL (+) or (–).
CH
→
VOL
—
VOL
+
CH
CANAD I AN
E NG L I S H
C
C8 +
G
PG
14+
18+
RE T URN
( I ND I V I DUA L
:
:
:
:
:
:
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
B L OC K
B L OC K )
(ENGLISH INDIVIDUAL
BLOCK mode)
4
You can select “BLOCK” or “– – – – –” (unblock) from each
RATING mode by pressing CH UP (8) or DOWN (9) and
VOL (+) or (–) if you select “Cdn. French Ratings” in step 2.
CH
→
VOL
—
VOL
+
CANAD I AN
F R E NCH
G
8ans+
13ans+
16ans+
18ans+
RE T URN
( I N D I V I DUA L
:
:
:
:
:
– – – – –
– – – – –
– – – – –
– – – – –
B L OC K
B L OC K )
CH
(FRENCH INDIVIDUAL
BLOCK mode)
Note:
• In additional mode
Including two types (English mode, French mode), altogether you are able to download 4 different
modes.
29
28-31 27R-FS1.p65e
29
23/5/01, 9:36 AM
Parental Control (V-CHIP Operation Continued)
L Turning On (Activating) the V-Chip Blocks
1
2
Repeat steps 1 to 4 of [1] MPAA RATING.
Press CH UP (8) or DOWN (9) to move the “a” mark to
“SECRET No.”.
CH
V - CH I P
B L OC K
MP A A
T V GU I D E L I N E S
O P T I ON
S ECRE T N o : – – – –
S T A TUS : OF F
CH
3
Enter a 4-digit SECRET No. using the REMOTE KEYPAD.
1
2
4
5
7
8
V - CH I P
3
6
9
ENTER
0
4
CH
5
100
Press CH UP (8) or DOWN (9) to move the “a” mark to
“STATUS”, then press VOL (+) or (–) to activate the V-CHIP
BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not operate.)
CH
→
VOL
—
B L OC K
MP A A
T V GU I D E L I N E S
O P T I ON
S ECRE T N o : 1 2 3 4
S T A TUS : OF F
V - CH I P
B L OC K
MP A A
T V GU I D E L I N E S
O P T I ON
S ECRE T N o : 1 2 3 4
S T A TUS : OF F
VOL
+
When done, press MENU to exit.
L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.
1
“V-CHIP HAS BEEN ACTIVATED” will be displayed if you view
a program containing Program Rating data as same as you
configured.
23
V - CH I P HA S B E EN
ACT I VA T ED
TV - Y7
FV
Note:
• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if
STATUS is not configured to “ON”.
2
Press MENU, then “INPUT SECRET No.” will be displayed.
I NP U T
–
3
Enter the 4-digit SECRET No. using the REMOTE KEYPAD,
then V-CHIP BLOCK temporarily will be canceled. If the wrong
SECRET No. is chosen, “SECRET No. IS INCORRECT” will
be displayed. Input the SECRET No. again in this case.
1
2
4
5
7
8
I NP U T
S E CRE T
–
–
No .
–
S E CRE T
No .
∗ ∗ ∗ ∗
3
6
9
ENTER
Note:
0
100
• If you turn the power from OFF, the V-CHIP BLOCK will automatically reset to ON again.
30
28-31 27R-FS1.p65e
30
21/5/01, 6:32 PM
Parental Control (V-CHIP Operation Continued)
L To change the V-CHIP BLOCK setting. (Secret No. is registered.)
1
2
Repeat steps 1 to 3 of [1] MPAA RATING, then “INPUT
SECRET No.” will be displayed.
Enter the 4-digit SECRET No. using the REMOTE KEYPAD
and the V-CHIP select mode will be displayed. Repeat
configuration of the V-CHIP BLOCK.
1
2
3
4
5
6
7
8
I NP U T
–
I NP U T
S E CRE T
–
–
No .
–
S E CRE T
No .
∗ ∗ ∗ ∗
9
ENTER
0
100
L If you forget or need to change your Secret No., clear the original Secret No. and set
up a new one.
1
Repeat steps 1 to 3 of [1] MPAA RATING, or 1 to 2 of [L To
cancel the V-CHIP BLOCK screen while V-CHIP BLOCK
has been activated], then “INPUT SECRET No.” will be
displayed.
2
Press and hold both VOL (+) and CH DOWN (9) on the
TV set simultaneously until the message “INPUT SECRET
No.” disappears.
(On the Set)
VOL (+)
VOL (+)/CHANNEL
DOWN (9) buttons
3
Press the MENU button to exit.
31
28-31 27R-FS1.p65e
31
21/5/01, 5:59 PM
Parental Control (VIEW TIMER)
L VIEW TIMER
This function allows you to restrict TV viewing time and also allows you to control TV usage.
This function is to prevent your children from watching too much TV.
VIEWING TIME (an accumulative timer: counts only the time
duration acquired while the TV is on.)
• VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10
V I EW T I ME R
hours) in 30 minutes intervals.
V I EW I NG T I ME
OFF TIME (Restricts TV watching after the VIEWING TIME
- - H: - - M
O F F T I ME
reaches zero.)
- - H: - - M
• OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours)
S E C R ET N o : – – – –
S T A TUS : OF F
in 30 minutes intervals.
STATUS (ON/OFF setting of VIEW TIMER)
L How to set VIEW TIMER.
1
2
ME N U
Press MENU to access the MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “a” mark to
“PARENT CONTROL”.
→
CH
S L E E P T I ME R
V I D EO A D J US T
A UD I O A D J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
CH
(MAIN MENU screen)
3
4
Press VOL (+) or (–) to access PARENT CONTROL mode.
Press CH UP (8) or DOWN (9) to move the “a” mark to “VIEW
TIMER”.
VOL
—
VOL
+
→
PARENT A L
CON T RO L
V - C H I P B L OC K
V I E W T I ME R
CH
CH
(PARENTAL CONTROL mode)
5
Press VOL (+) or (–) to access “VIEW TIMER”.
V I EW T I ME R
VOL
—
6
VOL
+
Press CH UP (8) or DOWN (9) to select “VIEWING TIME”
and “OFF TIME”. For each selection, press the VOL (+) or (–)
to set the time duration.
V I EW I NG T I ME
- - H: - - M
O F F T I ME
- - H: - - M
S E C R ET N o : – – – –
S T A TUS : OF F
V I EW T I ME R
V I EW I NG T I ME
2 H : 0 0M
T I ME
- - H: - - M
S E C R ET N o : – – – –
S T A TUS : OF F
OF F
CH
→
VOL
—
VOL
+
CH
7
Press CH UP (8) or DOWN (9) to move the “a” mark to
“SECRET No.”.
V I EW T I ME R
V I EW I NG T I ME
2 H : 0 0M
T I ME
5 H : 0 0M
S E C R ET N o : – – – –
S T A TUS : OF F
OF F
CH
CH
32
32-34 27R-FS1.p65e
32
23/5/01, 10:26 AM
Parental Control (VIEW TIMER Continued)
8
Enter the 4-digit SECRET No. using the REMOTE KEYPAD.
1
2
4
5
7
8
V I EW T I ME R
V I EW I NG T I ME
2 H : 0 0M
T I ME
5 H : 0 0M
S E C R ET N o : 1 2 3 4
S T A TUS : OFF
3
OF F
6
9
ENTER
0
9
100
Press CH UP (8) or DOWN (9) to select “STATUS”. Press
the VOL (+) or (–) to turn ON the “VIEWing TIMER”. (If STATUS
is OFF, VIEW TIMER will not operate)
V I EW T I ME R
V I EW I NG T I ME
2 H : 0 0M
T I ME
5 H : 0 0M
S E C R ET N o : 1 2 3 4
S T A TUS : ON
OF F
CH
→
VOL
—
VOL
+
CH
10 When done, press MENU
to exit.
Example
• To restrict anybody from watching the TV for 5 hours, after watching
the TV for 2 hours, your settings would look like this:
• They can choose to watch the 2 hours of TV however they wish.
For example, they could watch 1 hour of TV, turn TV off for 30
minutes, then turn TV on and watch the remaining 1 hour on the
VIEWING TIMER.
V I EW T I ME R
V I EW I NG T I ME
2 H : 0 0M
T I ME
5 H : 0 0M
S E C R ET N o : 1 2 3 4
S T A TUS : ON
OF F
L To change the VIEW TIMER settings. (SECRET No. is registered)
1
Repeat “How to set VIEW TIMER” steps and select “PARENT
CONTROL VIEW TIMER” during step 3. Press VOL (+) or (–),
and “INPUT SECRET No.” will be displayed.
VOL
—
2
I NP U T
–
S E CRE T
–
–
No .
–
VOL
+
Enter the 4-digit SECRET No. using the REMOTE KEYPAD,
and the VIEW TIMER access screen will be displayed. Repeat
step 5 ~ 6.
1
2
3
4
5
6
7
8
I NP U T
S E CRE T
No .
∗ ∗ ∗ ∗
9
ENTER
0
100
Note:
• When you choose the correct SECRET No., the VIEW TIMER
access screen is displayed. If the wrong SECRET No. is chosen,
“SECRET No. IS INCORRECT” is displayed. Input the SECRET
No. again in this case.
S E CRE T N o .
I N COR R E C T
IS
33
32-34 27R-FS1.p65e
33
21/5/01, 6:00 PM
Parental Control (VIEW TIMER Continued)
L To cancel the VIEW TIMER (While the TV set is OFF but the VIEW TIMER is set)
1
Turn on TV; a blue screen message “TIME OVER” will appear.
If you do nothing, the TV will turn off in approximately 30
seconds.
T I ME OV E R
I NP U T
–
2
Enter the 4-digit SECRET No. using the REMOTE KEYPAD.
When you choose the correct SECRET No., the VIEW TIMER
is canceled. If the wrong SECRET No. is chosen, “SECRET
No. IS INCORRECT” is displayed. Input the SECRET No.
again in this case.
1
2
3
4
5
7
8
S E CRE T
–
–
No .
–
T I ME OV E R
I NP U T
S E CRE T
No .
* * * *
6
9
ENTER
0
100
L How to cancel the VIEW TIMER setting or change the SECRET No.
(When you forget the SECRET No.)
1
Repeat “How to set VIEW TIMER” steps and select “PARENT
CONTROL VIEW TIMER” during step 3. Press VOL (+) or (–),
and “INPUT SECRET No.” will be displayed.
VOL
—
2
I NP U T
–
S E CRE T
–
–
No .
–
VOL
+
Press and hold both VOL (+) and CH DOWN (9) on the TV set
simultaneously until the VIEW TIMER access screen is
displayed. Now you can cancel the VIEW TIMER settings or
change the SECRET No. while “INPUT SECRET No.” is
displayed.
(On the Set)
VOL (+)
VOL (+)/CHANNEL
DOWN (9) buttons
L Notice of Remaining VIEWING TIME
• For every 30 minute interval, the “remaining time” will be displayed
for 4 seconds. For the last 5 minutes, the “remaining time” will be
displayed every minute.
• “0H00M” will be displayed for 10 seconds just before the VIEWING
TIME is complete.
VIEWING TIME
0H30M REMAIN
VIEWING TIME
0H 05M REMAIN
VIEWING TIME
0H00M REMAIN
34
32-34 27R-FS1.p65e
34
21/5/01, 6:00 PM
Ch Setup
L EZ SETUP
By operating the channel preset functions, you can preset your
TV to the desired channels for viewing.
1
2
3
4
5
6
7
8
REMOTE
KEYPAD
9
VOLUME
(+)/(–)
ENTER
FLASHBACK
0
100
PERSONAL PREFERENCE
A
B
C
D
CHANNEL
UP (8)/
DOWN (9)
MENU
CH
VOL
—
VOL
+
CH
MENU
1
2
Press MENU to access the MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “a” mark to “CH
SETUP”.
→
CH
CH
MUTE
ME N U
S L E E P T I ME R
V I D EO A D J US T
A UD I O A D J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
(MAIN MENU screen)
3
Press VOL (+) or (–) to access CH SETUP mode, then press
CH UP (8) or DOWN (9) to move the “a” mark to “EZ SETUP”.
VOL
—
VOL
+
→
CH
CH
S E TU P
A I R / CA B LE
C H MEMO R Y
C H S E A RC H
P E R S ON A L P R E F .
UN I V E RS A L P L US
EZ S E T U P
CH
(CH SETUP mode)
4
Press VOL (+) or (–) to access EZ SETUP mode.
CON N E C T
CA B L E
S T ART
EZ
S T OP
VOL
—
A N T E N N A OR
SE TUP ?
S T ART
VOL
+
(EZ SETUP mode)
5
6
Press VOL (+).
The tuner will automatically search for the broadcasting and
cable TV channels. (The CH No. will automatically increase
when it appears.)
If you want to stop the EZ SETUP process once it has started,
press VOL (–). Search will be cancelled.
VOL
+
To cancel EZ SETUP
Press VOL (–).
P L E A S E WA I T
AUTO
P R O G R AMM I N G
125
S TOP
Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
S T ART
2
35
35-36 27R-FS1.p65e
35
21/5/01, 6:00 PM
Ch Setup (Continued)
L CHANNEL SETTING
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel.
1 AIR/CABLE setting
1
2
Press MENU to access the MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “a” mark to “CH
SETUP”.
→
CH
CH
ME N U
S L E E P T I ME R
V I D EO A D J U S T
AUD I O AD J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E T UP
SE TUP
(MAIN MENU screen)
3
4
Press VOL (+) or (–) to access CH SETUP mode.
Press CH UP (8) or DOWN (9) to move the “a” mark to “AIR/
CABLE”.
VOL
—
VOL
+
→
CH
CH
S E TU P
A I R / CA B LE
C H MEMO R Y
C H S E A RC H
P E R S ON A L P R E F .
UN I V E RS A L P L US
EZ S E T U P
CH
(CH SETUP mode)
5
Press VOL (+) or (–) to access AIR/CABLE mode.
A I R / CAB L E
AIR
CAB L E
CAB L E
CAB L E
VOL
—
STD
HRC
I RC
VOL
+
(AIR/CABLE mode)
6
Press CH UP (8) or DOWN (9) to move the “a” mark to the
desired mode.
AIR
CABLE STD
CABLE HRC
A I R / CAB L E
AIR
CAB L E
CAB L E
CAB L E
CABLE IRC
STD
HRC
I RC
CH
CH
(AIR/CABLE mode)
7
Press MENU to exit.
Note:
• Receivable channels of your TV set are:
AIR channels:
VHF: 2 through 13.
UHF: 14 through 69.
CABLE channels:
1 (HRC and IRC mode only)
2 through 125 (STD, HRC and IRC)
36
35-36 27R-FS1.p65e
36
21/5/01, 6:00 PM
Ch Setup (Continued)
2
How to saving broadcast TV channels into memory.
POWER
DVD
VCR
TV
DISPLAY
INPUT
1
2
3
4
5
6
7
8
9
ENTER
FLASHBACK
0
100
VOLUME
(+)/(–)
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CATV
TV
DVD
VCR
CHANNEL
UP (8)/
DOWN (9)
MENU
1.1
1.2
1.3
Press MENU to access the MAIN
MENU screen, then press CH UP
(8) or DOWN (9) to move the “a”
mark to “CH SETUP”.
Press VOL (+) or (–) to access CH
SETUP mode, then press CH UP (8)
or DOWN (9) to move the “a” mark
to “CH SEARCH”.
Press VOL (+) or (–) to access CH
SEARCH screen.
→
CH
VOL
—
VOL
+
→
CH
VOL
—
S E TU P
A I R / CA B LE
C H MEMO R Y
C H S E A RC H
P E R S ON A L P R E F .
UN I V E RS A L P L US
EZ S E T U P
CH
(CH SETUP mode)
CH
VOL
+
(START)
START
2.1
CH
CH
Press VOL (+). The tuner will search
through all available channels in your
area and add them into the TV’s
memory.
STOP
VOL
+
Press VOL (–). CH SEARCH will stop
at the current channel and will not
add any higher channels.
2.3
Press MENU to exit.
12
S T OP
(STOP)
2.2
S E ARCH
AIR
S T ART
(CH SEARCH mode)
VOL
—
Note:
• If you press VOL (+) again while in the CH SEARCH mode, autoprogram will start again, and the previously memorized channels
will be lost.
37
37-38 27R-FS1.p65e
37
21/5/01, 6:01 PM
Ch Setup (Continued)
3
1
How to adding weak or additional channels or erasing unwanted channels from TV memory.
Press MENU to access the MAIN MENU screen, then press
CH UP (8) or DOWN (9) to move the “a” mark to “CH SETUP”.
CH
→
CH
ME N U
S L E E P T I ME R
V I D EO A D J U S T
AUD I O A D J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
(CH SETTING mode)
2
Press VOL (+) or (–) to access CH SETUP mode, then press
CH UP (8) or DOWN (9) to move the “a” mark to “CH
MEMORY”.
VOL
—
VOL
+
CH
→
CH
S E TU P
A I R / CA B LE
C H MEMO R Y
C H S E A RC H
P E R S ON A L P R E F .
UN I V E RS A L P L US
EZ S E T U P
CH
(CH SETUP mode)
3
Press VOL (+) or (–) to access CH MEMORY.
C H MEMOR Y
AIR
12
ERASE
VOL
—
ADD
VOL
+
(CH MEMORY mode)
4
Use CH UP (8) or DOWN (9) or REMOTE KEYPAD to select
each desired channel to add or erase.
CH
or
1
2
4
5
7
8
3
6
9
ENTER
CH
5
0
Press VOL (+) to add a channel to the TV’s memory or press
VOL (–) to erase a channel from the TV’s memory.
VOL
—
6
100
VOL
+
Press MENU to exit.
38
37-38 27R-FS1.p65e
38
21/5/01, 6:01 PM
Ch Setup (Continued)
L PERSONAL PREFERENCE
By setting the PERSONAL PREFERENCE channels in advance,
you can select your favorite channels easily.
1
2
3
4
5
6
7
8
9
VOLUME
(+)/(–)
ENTER
FLASHBACK
0
PERSONAL
PREFERENCE
REMOTE
KEYPAD
100
PERSONAL PREFERENCE
A
B
C
D
CHANNEL
UP (8)/
DOWN (9)
CH
VOL
—
VOL
+
CH
MENU
MUTE
MENU
1
2
Press MENU to access the MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “a” mark to “CH
SETUP”.
→
CH
ME N U
S L E E P T I ME R
V I D EO A D J US T
A UD I O A D J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
CH
(MAIN MENU screen)
3
Press VOL (+) or (–) to access CH SETUP mode, then press CH
UP (8) or DOWN (9) to move the “a” mark to “PERSONAL
PREFERENCE”.
VOL
—
VOL
+
CH
→
CH
S E TU P
A I R / CA B LE
C H MEMO R Y
C H S E A RC H
P E R S ON A L P R E F .
UN I V E RS A L P L US
EZ S E T U P
CH
(CH SETUP mode)
4
Press VOL (+) or (–) to select PERSONAL PREFERENCE select
mode in which you can program 4 favorite channels, in 4 different
categories. (total of 16 channels)
VOL
—
VOL
+
P E R S ON A L
A
–––
–––
–––
–––
B
–––
–––
–––
–––
PR E F .
C
–––
–––
–––
–––
D
–––
–––
–––
–––
(PERSONAL PREFERENCE select mode)
5
Press CH UP (8) or DOWN (9) to move the “a” mark to the
desired position.
A
–––
–––
–––
–––
CH
CH
6
Press REMOTE KEYPAD on the Remote to input the CHANNEL
Number into the memory.
1
2
3
Example:
4
5
6
125 — Press “100” followed by “2” and then “5”.
7
8
9
25 — Press “2” and then “5”.
0
100
4 — Press “0” and then “4”.
ENTER
7
Repeat steps 4 to 6 to input the next CHANNEL Number.
8
Press MENU to exit.
To select the PERSONAL PREFERENCE channel.
If the channels are memorized as shown to the right,
press the Remote’s “A” button to select the Channels below.
125
25
40
4
P E R S ON A L
B
–––
–––
–––
–––
P E R S ON A L
A
125
–––
–––
–––
B
–––
–––
–––
–––
P E R S ON A L
A
125
25
40
4
B
85
123
55
–––
PR E F .
C
–––
–––
–––
–––
D
–––
–––
–––
–––
PR E F .
C
–––
–––
–––
–––
D
–––
–––
–––
–––
PR E F .
C
38
30
–––
–––
D
–––
–––
–––
–––
39
39-40 27R-FS1.p65e
39
21/5/01, 6:01 PM
Ch Set up (Continued)
L UNIVERSAL PLUS FUNCTION
VCR or DVD input mode will be selected automatically by
pressing the VCR or DVD PLAY buttons on the UNIVERSAL
REMOTE CONTROL.
1
2
Press MENU to access the MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “a” mark to “CH
SETUP”.
CH
→
PERSONAL PREFERENCE
A
B
C
VOLUME
(+)/(–)
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CATV
TV
DVD
VCR
CHANNEL
UP (8)/
DOWN (9)
MENU
ME N U
S L E E P T I ME R
V I D EO A D J US T
AUD I O A D J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
CH
(MAIN MENU screen)
3
Press VOL (+) or (–) to access CH SETUP mode.
CH
VOL
—
VOL
+
S E TU P
A I R / CA B LE
C H MEMO R Y
C H S E A RC H
P E R S ON A L P R E F .
UN I V E RS A L P L US
EZ S E T U P
(CH SETUP mode)
4
Press CH UP (8) or DOWN (9) to move the “a” mark to
“UNIVERSAL PLUS”.
CH
CH
S E TU P
A I R / CA B LE
C H MEMO R Y
C H S E A RC H
P E R S ON A L P R E F .
UN I V E RS A L P L US
EZ S E T U P
CH
5
Press VOL (+) or (–) to access UNIVERSAL PLUS to select
VCR or DVD mode.
UN I V ERS A L
P LUS
V CR : O F F
DV D : O F F
VOL
—
VOL
+
(UNIVERSAL PLUS select mode)
6
Press CH UP (8) or DOWN (9) to select the VCR or DVD,
and press VOL (+) or (–) to select “CH3, CH4”, “INPUT 1”,
“INPUT 2”, “INPUT 3(COMPONENT)” or “OFF”.
CH3
CH4
OFF
INPUT 1
V CR : CH 3
DV D : O F F
INPUT 2
INPUT 3(COMPONENT)
Set model to the input in which your
VCR or DVD is connected to. If done
through RF, select either channel 3 or 4
to match the setting of the VCR or DVD.
7
UN I V ERS A L
CH
→
VOL
—
VOL
+
CH
Press MENU to exit.
Note:
•
40
“COMPONENT” is not displayed, when the AV
cable is not connected to the COMPONENT jacks.
39-40 27R-FS1.p65e
40
22/5/01, 7:33 pm
P LUS
Set Up
L ENERGY SAVE
This feature lets you lower the power consumption of your
TV set which in turn saves you money and minimizes the
impact on the environment. When this feature is turned on, it
reduecs the brightness of the TV to a level that consumes
approximately 20 percent less energy than when the feature
is turned off.
The reduction in brightness will be less noticeable under low
room lighting conditions.
POWER
DVD
VCR
TV
DISPLAY
1
2
4
5
7
8
INPUT
3
6
9
ENTER
FLASHBACK
0
100
VOLUME
(+)/(–)
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CATV
TV
DVD
VCR
CHANNEL
UP (8)/
DOWN (9)
MENU
1
2
Press MENU to access the MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “a” mark to
“SETUP”.
→
CH
ME N U
S L E E P T I ME R
V I D EO A D J US T
A UD I O A D J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
CH
(MAIN MENU screen)
3
Press VOL (+) or (–) to access SET UP select mode, then
press CH UP (8) or DOWN (9) to move the “a” mark to
“ENERGY SAVE”.
VOL
—
VOL
+
→
CH
SETUP
L A NGU A G E
E N E RG Y S A V E
S C R E E N F ORMA T
D EMO
AUTO IN PUT
CH
(SETUP mode)
4
Press VOL (+) or (–) to access ENERGY SAVE select mode.
VOL
—
E N E RG Y
S AV E
: OF F
VOL
+
(ENERGY SAVE select mode)
5
Press VOL (+) or (–) to select “ON”.
E N E RG Y
VOL
—
6
S AV E
: ON
VOL
+
Press MENU to exit.
41
41-42 27R-FS1.p65e
41
21/5/01, 6:01 PM
Set Up (Continued)
L SCREEN FORMAT
The format of the picture can be adjusted to any of three
screen formats.
POWER
DVD
VCR
TV
DISPLAY
1
2
4
5
7
8
INPUT
3
6
9
ENTER
FLASHBACK
0
100
VOLUME
(+)/(–)
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CATV
TV
DVD
VCR
CHANNEL
UP (8)/
DOWN (9)
MENU
1
2
Press MENU to access the MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “a” mark to
“SETUP”.
→
CH
CH
ME N U
S L E E P T I ME R
V I D EO A D J US T
A UD I O A D J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
(MAIN MENU screen)
3
Press VOL (+) or (–) to access SETUP mode, then press CH
UP (8) or DOWN (9) to move the “a” mark to “SCREEN
FORMAT”.
VOL
—
VOL
+
→
CH
SETUP
L A NGU A G E
E N E RG Y S A V E
S C R E E N F ORMA T
D EMO
AUTO IN PUT
CH
(SETUP mode)
4
Press VOL (+) or (–) to access SCREEN FORMAT select
mode.
S CR E EN
F O RM A T
4 : 3
16 : 9
Z OOM
VOL
—
VOL
+
(SCREEN FORMAT mode)
5
Press CH UP (8) or DOWN (9) to select “4:3”, ‘16:9” or
“ZOOM”.
S CR E EN
F O RM A T
4 : 3
16 : 9
Z OOM
CH
CH
6
Press MENU to exit.
42
41-42 27R-FS1.p65e
42
24/5/01, 11:41 AM
Set up (Continued)
L AUTO INPUT
The unit will switch to the INPUT 2 screen automatically when
VIDEO equipment is connected to the INPUT 2 terminal. To
switch this feature off, plese do the following:.
1
2
Press MENU to access the MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “a” mark to “SET
UP”.
CH
→
CH
PERSONAL PREFERENCE
A
B
C
VOLUME
(+)/(–)
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CATV
TV
DVD
VCR
CHANNEL
UP (8)/
DOWN (9)
MENU
ME N U
S L E E P T I ME R
V I D EO A D J US T
A UD I O A D J US T
C L O S E D C A P T I ON
P A R E N T A L CON T RO L
CH S E TU P
S E TUP
(MAIN MENU screen)
3
Press VOL (+) or (–) to access SETUP mode.
S E TUP
VOL
—
VOL
+
L A N GU A G E
E N E RG Y S A V E
S C R E E N F OR M AT
D EMO
A U T O I N PU T
(SET UP mode)
4
Press VOL (+) or (–) to access AUTO INPUT select mode.
Press VOL (+) or (–) to select “AUTO” or “OFF”.
You may turn OFF the unit when it is not in use. Press VOL (+)
or (–) to select “OFF”.
VOL
—
A U T O I N PU T
( I NPU T 2 )
: AUTO
VOL
+
(AUTO INPUT select mode)
5
Press MENU to exit.
43
43-45 27R-FS1.p65e
43
21/5/01, 6:02 PM
Using the Video and Audio Input Jacks
L Connecting video equipment for playback of video material.
• When the television is connected to video equipment as shown below, the material being played
back on the video equipment can be seen on the television screen.
Connecting video device equipped with video output terminals.
CONNECTIONS
VIDEO EQUIPMENT
(Front connection
terminals of TV)
Push open for inside door
To S-VIDEO OUTPUT
To VIDEO OUTPUT
CAMCORDER
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
(Rear connection
terminals of TV)
TV GAME
To VIDEO OUTPUT
To AUDIO OUTPUT (L)
VCR
To AUDIO OUTPUT (R)
To AUDIO OUTPUT (R)
To AUDIO OUTPUT (L)
REV
To VIDEO OUTPUT
FWD
DVD
44
43-45 27R-FS1.p65e
44
21/5/01, 6:02 PM
Using the Video and Audio Input Jacks (Continued)
Notes:
• The S-VIDEO INPUT terminals (IN 1, IN 2) used to obtain a higher quality image by importing
image signals separated into color and brightness signals.
• Each S-VIDEO INPUT terminal is for the video image only. To receive an audio signal, connect
the audio cable to the IN 1 or IN 2 AUDIO terminals (left and right).
(Rear connection terminals of TV)
To VIDEO OUTPUT
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
Video Equipment
TO S-VIDEO OUTPUT
(When your video equipment
has an S-VIDEO output terminal).
To AUDIO
OUTPUT (L/R)
VCR
To VIDEO OUTPUT
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
To COMPONENT
VIDEO OUTPUT
Jacks
Video Equipment with
Component Video
(Component Color)
Output Jacks (Y, PB and PR)
L To watch video material playback.
• Press the Remote’s INPUT button to select the VIDEO INPUT mode for the video equipment you
wish to play.
• The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed.
• When the AV cables are being connected to the VIDEO INPUT 3 and COMPONENT Y terminals
simultaneously, the COMPONENT terminal has priority over the VIDEO terminal.
AIR
or
CABLE
INPUT 1
(IN 1)
Rear
INPUT 2
(IN 2)
Front
INPUT 3 or COMPONENT
(IN 3)
Rear
Rear
• INPUT mode can be selected by pressing either the CH UP (8) on the TV remote control when the
TV is set to the highest channel stored in memory, or by pressing the CH DOWN (9) when it is set to
the lowest channel.
Note:
• When connecting video or audio equipment to the television, be sure that the power is turned off in
order to prevent damage to either the television or the equipment being connected.
• The S-Video terminal has priority over the VIDEO terminal (IN 1 or IN 2). When you wish to use video
equipment connected to the VIDEO terminal (IN 1 or IN 2), unplug equipment connected to the SVIDEO terminal.
• It is the intent of SHARP that this product be used in full compliance with the copyright law of the
United States and that prior permission be obtained from copyright owners whenever necessary.
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction
manuals of the equipment being used.
• The connection cords can be obtained from your local video store.
45
43-45 27R-FS1.p65e
45
24/5/01, 4:17 PM
Using the Audio Output Jacks
L These jacks are used for connecting an external audio amplifier. The STEREO/MONO/SAP,
VOLUME, MUTE and FAO functions can all be controlled via the television’s remote control or
directly on the TV itself. These jacks relay the audio signal of all programs being displayed on
the TV screen.
(AUDIO OUTPUT JACKS are located on the rear of the cabinet.)
CONNECTIONS
(Rear connection terminals of TV)
To the audio
input terminals
Stereo Amplifier
Speaker System
(1) Before connecting the cables, turn on the TV and adjust the VOLUME control on the TV to a moderate
listening level.
(2) Turn off the TV and connect the audio cables to the AUDIO LINE OUTPUT JACKS on the TV.
(3) Turn the TV set and stereo amplifier on.
(4) If you desire, you can turn off the sound to the TV’s internal speakers by accessing the TV’s AUDIO
SELECT mode. See page 21, 22.
(5) Adjust the VOLUME control on the stereo amplifier for a moderate listening level.
(6) Control of the audio can be adjusted using the audio controls (STEREO/MONO/SAP, VOLUME,
MUTE and FAO), from either the remote control, or directly from the TV set.
Note:
• For detailed information on the connection and use of auxiliary equipment, refer to the operation
manuals of the equipment being used.
• When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio
connection cord and plug adaptor as shown below.
• For optimal sound quality, we recommend you to keep the TV’s audio output level high.
Plug adapter
To the equipment
being connected
To the TV
Pin plug x 2
Pin Plug
Pin jack/Mini plug
46
46 27R-FS1.p65e
46
21/5/01, 6:02 PM
Operation of Remote Control
L “Identifying” Remote VCRs, cable TV
conveters and DVDs
Your Remote Control has been set at the
factory to operate your TV and many remote
control VCRs, cable TV converters and DVDs.
However, in some cases an easy one-time setup step may be necessary before the Remote
will operate accessory VCRs, cable TV
converters and DVDs.
• In this set-up step, the Remote locates and
memorizes the remote control transmitter code
for the VCR, cable TV converters and DVDs.
• Once “identified”, the Remote sends the proper
remote signals to operate your accessory.
• This identify step will not have to be repeated
until power to the Remote is interrupted due
to a battery failure.
L Universal Remote Control
With the purchase of your television set you
also have received the latest innovation in
remote control technology. With its easy-touse push button keyboard, your Remote can
control your television set and most infrared
remote controlled VCRs, cable TV converters
and DVDs as well.
Note:
• Depending on the model year produced, brand
and type of VCR, cable TV converter and DVD,
some models may not be compatible with the
remote control.
• Some brands may not enable channel
selection until the ENTER button is pressed.
Example:
When you select channel 24,
(1) Press REMOTE KEYPAD “2”.
(2) Press REMOTE KEYPAD “4”.
(3) Press ENTER.
For detailed information on the use of the
Cable TV converter Box refer to their operating
manuals.
L USING YOUR REMOTE CONTROL WITH A
VCR
Once you make certain the Remote Control
has “identified” your remote controlled VCR
or DVD, the Remote Control is ready to
operate your unit. The various VCR or DVD
function buttons on the Remote Control will
not operate your VCR or DVD if those features
are not already found on your unit.
• All VCR buttons will operate whether the
Remote Control is in TV or VCR modes.
• For detailed information on the use of the VCR
or DVD, refer to the operation manual of the
VCR or DVD.
L Using Your Remote With Your TV
After installing the batteries, set the CATV/
DVD-TV/VCR on the remote to the TV
position. (If you can change the channel of
the TV by pressing CH UP (8) or DOWN (9)
on the Remote Control, it is the TV position.)
DVD/VCR POWER
Press to turn the VCR or DVD
on and off.
REMOTE KEYPAD
Use to enter two-digit code
numbers when identifying your
VCR.
POWER
DVD
VCR
TV
PLAY
Press to playback a tape or disc.
DISPLAY
INPUT
1
2
3
4
5
6
7
8
ENTER
REWIND
Press to rewind a tape or
reverse a disc. For some VCRs
or DVDs you may need to
press STOP first, then REWIND.
FF
Press to rapidly advance the
tape or disc. For some VCRs or
DVDs, you may need to press
STOP first, then FF.
9
ENTER
FLASHBACK
0
100
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
+
VOL
—
CH
PAUSE
Press to temporarily stop the
tape or disc during playback
or recording (VCR only).
Press again to release Pause.
MENU
MUTE
CATV
TV
DVD
VCR
REW
PLAY
FF
PAUSE
STOP
REC
CH/SKIP
STOP
Press to stop the tape or disc.
TV • CATV • VCR • DVD
VCR CHANNEL
UP ( )/ DOWN ( )
Press to scan up or down through
channels on the VCR.
DVD SKIP
Press to jump forward to the
beginning of the next chapter/track,
or backward to the beginning of the
current chapter/track, and
automatically start to play that
chapter/track.
RECORD
Press to begin recording.
(VCR only)
47
47-49 27R-FS1.p65e
47
24/5/01, 11:34 AM
Operation of Remote Control (Continued)
DVD/VCR
POWER
POWER
DVD
VCR
TV
TV
POWER
DISPLAY
INPUT
DISPLAY
REMOTE
KEYPAD
1
2
3
4
5
6
7
8
9
ENTER
FLASHBACK
0
100
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CATV
TV
DVD
VCR
REW
PLAY
FF
PAUSE
STOP
REC
L HOW TO IDENTIFY A VCR
The remote control may already be set to
operate your VCR. Try this initial check before
going on to the following “identify” section.
(1) Slide CATV/DVD-TV/VCR switch to VCR.
(2) Point remote towards VCR and press DVD/
VCR POWER.
(3) Does the remote turn the VCR ON and OFF?
• If yes, the remote is ready to operate the VCR
and no further steps are needed.
• If no, continue to the “identify” section.
L To Identify Your VCR – Direct Entry Method.
Use the following steps and list to quickly find
the remote control code for your accessory
VCR.
• First look up your VCR’s remote control code
number before going through the direct code
entry steps control.
• If this procedure does not identify your
accessory VCR, use the Search method of
identification (described in the next section).
(1) Slide CATV/DVD-TV/VCR switch to VCR.
(2) Press and hold down DISPLAY and CH
DOWN (9) on your remote control.
Then release both buttons.
(3) Within ten seconds after releasing DISPLAY
and CH DOWN (9) , enter your VCR’s twodigit remote control code number using the
REMOTE KEYPAD (refer to list).
• The remote control is now ready to send
commands to your VCR.
CHANNEL
UP (8)/
DOWN (9)
CATV/DVD-TV/VCR
CH/SKIP
Some brands have more than one remote
code listed, due to changes in the remote
codes from early to later model years, or due
to format differences (VHS/BETA). In such
cases, you may have to try more than one code
to find the code your VCR accepts.
Note:
Depending on the model, year produced,
brand, and type of VCR, some models may
not be compatible with the remote control.
L To Identify Your VCR – Search Method.
(1) Slide CATV/DVD-TV/VCR switch on the
remote to VCR.
(2) Press POWER on the VCR to ON.
(3) Stand at least six feet away from the front of
the VCR.
Point the remote towards the VCR.
Hold down DISPLAY and CH UP (8) at the
same time. KEEP HOLDING THE BUTTONS
DOWN.
(4) Watch the Channel Number indicator on the
VCR, Channel numbers will scan up when the
VCR has been identified.
Release DISPLAY and CH UP (8) as soon
as the channel numbers start to scan up.
The VCR’s remote control code number has
been identified, and the remote is ready to
operate the VCR.
48
47-49 27R-FS1.p65e
48
21/5/01, 6:05 PM
Operation of Remote Control (Continued)
VCR BRAND
POWER
DVD
VCR
TV
TV
POWER
DISPLAY
INPUT
DISPLAY
1
2
3
4
5
6
7
8
REMOTE
KEYPAD
9
ENTER
FLASHBACK
0
100
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
+
VOL
—
CH
MENU
CHANNEL
UP (8)/
DOWN (9)
MUTE
CATV
TV
DVD
VCR
REW
PLAY
FF
PAUSE
STOP
REC
REMOTE CONTROL
CODE NUMBER
CATV/DVDTV/VCR
CH/SKIP
TIPS ON IDENTIFYING YOUR VCR:
If your VCR model does not have the CHANNEL
UP function on its remote control, it cannot be
identified using the SEARCH method for identifying.
For such models, please try the DIRECT ENTRY
method of identifying.
Be Patient: a minute or two can seem a lot longer
when you’re waiting for something to happen, but
the code should be identified within 2 minutes.
Remember, it is only a one-time set-up.
Be careful not to let the VCR scan more than five
channels when the indicator starts to move up. If
you continue holding down the DISPLAY and CH
UP (8) after five channel scans, the proper remote
code can be passed up, and the two minutes identify
cycle will have to be repeated.
If a channel change does not occur on the VCR
within two minutes, read the identifying instructions
again and repeat the steps. Should a channel
change still not occur the remote will not operate
with the desired VCR.
Akai
Audio Dynamics
Broksonic
Canon
Capehart
Craig
Curtis Mathis
Daewoo
DBX
Dynatech
Emerson
Fisher
Funai
GE
Goldstar
Hitachi
Instant Replay
JC Penney
JVC
Kenwood
Lloyds
Magnavox
Magnin
Marantz
Memorex
Minolta
Mitsubishi
Montgomery Ward
Multitech
NEC
Panasonic
Pentax
Philco
Philips
Quasar
RCA
Realistic
Samsung
Sanyo
Scott
Sears
Sharp
Shintom
Sony
Sound Design
Sylvania
Symphonic
Tatung
Teac
Teknika
Thomas
TMK
Toshiba
Video Concepts
Yamaha
Zenith
25, 26, 37
15, 22, 30
32
04
34
10, 31
04
34
15, 22, 30
29
21, 32, 35
09, 10, 11
28, 29
04
24
06
04
04, 06, 24, 30
15, 41, 42
14, 15
29
04, 05, 08
31
30
04, 10, 24, 29
06
17, 18, 39, 40
02, 43
29
15, 22, 30
04, 44
05, 06
04, 05
04, 05, 08
04
06, 07, 33
01, 02, 10, 24
23, 31
14, 10
20
06, 11, 24
01, 02, 03
36
12, 13, 38
29
04, 05, 08
29
15
15, 29
27, 29
29
21
19, 20
30
15, 29, 30
16
49
47-49 27R-FS1.p65e
49
21/5/01, 6:05 PM
Operation of Remote Control (Continued)
DVD/VCR
POWER
POWER
DVD
VCR
TV
TV
POWER
DISPLAY
INPUT
INPUT
1
2
3
4
5
6
7
8
DISPLAY
REMOTE
KEYPAD
9
ENTER
FLASHBACK
0
100
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CATV
TV
DVD
VCR
REW
PLAY
FF
PAUSE
STOP
REC
L HOW TO IDENTIFY A DVD
The remote control may already be set to
operate your DVD. Try this initial check before
going on to the following “identify” section.
(1) Slide CATV/DVD-TV/VCR switch to DVD.
(2) Point remote towards DVD and press DVD/
VCR POWER.
(3) Does the remote turn the DVD ON and OFF?
• If yes, the remote is ready to operate the DVD
and no further steps are needed.
• If no, continue to the “identify” section.
L To Identify Your DVD – Direct Entry Method.
Use the following steps and list to quickly find
the remote control code for your accessory
DVD.
• First look up your DVD’s remote control code
number before going through the direct code
entry steps control.
CHANNEL
UP (8)/
DOWN (9)
CATV/DVDTV/VCR
CH/SKIP
DVD BRAND
Denon
JVC
Magnavox
Marantz
Mitsubishi
Panasonic
Philips
Pioneer
Proscan
RCA
Samsung
Sharp
Sony
Toshiba
Yamaha
Zenith
REMOTE CONTROL
CODE NUMBER
02
09
04
04
06
02
04
08
03
03
07
01
05
04
02
04
Note:
Depending on the model, year produced,
brand, and type of DVD, some models may
not be compatible with the remote control.
(1) Slide CATV/DVD-TV/VCR switch to DVD.
(2) Press and hold down INPUT and CH DOWN
(9) on your remote control.
Then release both buttons.
(3) Within ten seconds after releasing INPUT and
CH DOWN (9) , enter your DVDs two-digit
remote control code number using REMOTE
KEYPAD (refer to list).
• The remote control is now ready to send
commands to your DVD.
50
50-51 27R-FS1.p65e
50
21/5/01, 6:05 PM
Operation of Remote Control (Continued)
L HOW TO IDENTIFY A CABLE CONVERTER
L To Identify Your Cable Converter –Direct
Entry Method.
Use the following steps and list to quickly find
the remote control code for your cable TV
converter.
• First look up your converter’s remote code
number before going through the direct code
entry steps below.
• If this procedure does not identify your
converter, use the Search method for
identification.
(1) Slide CATV /DVD-TV/VCR switch to CATV.
(2) Press and hold down DISPLAY and CH
DOWN (9) on your remote control.
Then release both buttons.
(3) Within ten seconds after releasing DISPLAY
and CH DOWN (9), enter your converter’s
two-digit code number using REMOTE
KEYPAD (refer to list).
• The remote control is now ready to send
commands to your converter.
• Some brands have more than one remote
code listed due to changes in the remote codes
from early to later model years. In such cases,
you may have to try more than one code to
find the code your converter accepts.
Note:
Depending on the model, year produced,
brand, and type of CATV converter, some
models may not be compatible with the remote
control.
L To Identify Your Cable Converter – Search
Method.
(1) Slide the CATV /DVD-TV/VCR switch to CATV.
(2) Press the POWER button on the cable
converter to ON.
(3) Stand at least six feet away from the converter.
Point the remote towards the converter.
Hold down the DISPLAY and CH UP (8) at
the same time. KEEP HOLDING THE
BUTTONS DOWN.
(4) Watch the Channel Number indicator on the
converter.
Channel numbers will scan up when the
converter has been identified.
Release the DISPLAY and CH UP (8) as soon
as the channel numbers start to scan up.
The converter’s remote control code number
has been identified, and the remote is ready
to operate the converter.
CATV CONVERTER
BRAND
Anvision
Cable Star
Eagle
General Instrument
Jerrold
Magnavox
Oak Sigma
Panasonic
Philips
Pioneer
Randtek
RCA
Scientific Atlanta
Sony
Viewstar
Zenith
REMOTE CONTROL
CODE NUMBER
07, 08
07, 08
08
04, 05, 15, 23, 24, 25,
30, 36
04, 05, 15, 23, 24, 25
30, 36
07, 08, 19, 25, 28, 29,
32, 33, 40, 41
18
27, 39
07, 08, 19, 26, 28, 29,
32, 33, 40, 41
18, 20
07, 08
27, 43
03, 22, 42
44
07, 08, 19, 26, 28, 29
32, 33, 40, 41
14
TIPS ON IDENTIFYING YOUR CABLE
CONVERTER:
Be Patient: a minute or two can seem a lot
longer when you’re waiting for something to
happen, but the code should be identified
within 2 minutes. Remember, it is only a onetime set-up.
Be careful not to let the CATV converter scan
more than five channels when the indicator
starts to move up. If you continue holding down
the DISPLAY and CH UP (8) after five channel
scans, the proper remote code can be passed
up, and the two minute identify cycle will have
to be repeated.
If a channel change does not occur on the
cable converter within two minutes, read the
identifying instructions again and repeat the
steps. Should a channel change still not occur,
the remote will not operate with the desired
converter.
Note:
Some satellite receivers can be operated by
the REMOTE CONTROL. If you have a
Satellite Receiver, you can use the above
method to search for available channels.
51
50-51 27R-FS1.p65e
51
21/5/01, 6:05 PM
Before Calling for Service
PROBLEM
QUICK SERVICE
CHECK LIST
No Playback of VCR and Disc
Player
No Picture or Sound from
External Video/Audio Products
Remote Control Doesn’t Work
Bars on Screen
Picture Distorted
Picture Rolls Vertically
No Color
Poor Reception on Some
Channels
Weak Picture
Lines or Streaks in Picture
Ghosts in Picture
Picture Blurred
Sound OK, Picture Poor
Picture OK, Sound Poor
No Picture or Sound
Dark and Blank Picture
External Electrical Noise
Interfering with TV’s Operation
Color on Part of the Screen
Appears Distored
Check these items and see if you can correct the trouble with a slight adjustment of the controls.
POSSIBLE REMEDY
Try a new channel, if OK, then there
is possible station trouble.
X
X
Is TV plugged in? Power at outlet?
X
X
X X X X X
Is TV’s POWER button on?
X
X
X X X X X
Is antenna connected to terminal on
the back of the set?
X
X
X X X X X
If outside antenna is being used,
check for broken wire.
X
X
Check for local interference or
external electrical noise.
X
Turn off with POWER button and then
turn it on after about a minute.
X X X X X
X
X X X X X X X X
X
X
X
X X X X X X X X
X
X
X
X X X X X X X X
X
X
X
X X X X X X X X
X
X
X X X X X
X
X X X X X X X X
X
X
X
X X X X X
X
X X X X X X X X
X
X
X
X
X X X X X
X
X X X X X X X X
X
X
Adjust COLOR control.
X
X
X X X X X
X
X X X X X X X X
X
X
Adjust PICTURE control.
X
X
X X X X X
X
X X X X X X X X
X
X
Check external Video/Audio products:
look for loose/broken connection
leads. (Refer to page 44, 45)
X
X
X X X X X
X
X X X X X X X X
X
X
Check batteries of Remote Control.
X
X
X X X X X
X
X X X X X X X X
X
X
Slide CATV/DVD-TV/VCR Select
Switch to TV position.
X
X
X X X X X
X
X X X X X X X X
X
X
Are audio cables connected firmly?
Check the volume level.
X
X
X X X X X
X
X X X X X X X
X
X
Is SPEAKER ON? See page 21, 22.
X
X
X X X X X
X
X X X X X X X X
X
X
Change Closed Caption mode to
“OFF” / Energy Save mode to “OFF”.
X
X
X X X X X
X
X X X X X X X X
X
X
Unplug the TV and plug it in again
after two minutes or longer.
X
X
X X X X X
X
X X X X X X X X
X
X
Note:
• When viewing in TEXT mode, if no TEXT broadcast is being received,
the screen may become dark and blank. Should this occur, set the
Closed Caption mode to “OFF”.
(Dark and Blank Picture)
Calling for Service
For location of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies,
or customer assistance, please call 1-800-BE-SHARP.
52
52-53 27R-FS1.p65e
52
21/5/01, 6:06 PM
Antes de llamar al servicio de reparaciones
PROBLEMA
LISTA DE
COMPROBACIONES
DE SERVICIO
RAPIDO
POSIBLE SOLUCIÓN
Pruebe con otro canal y si todo está
bien, el problema puede ser de la
emisora.
Está conectado el televisor?
Llega electricidad al tomacorrientes?
Está conectado el interruptor del
televisor?
Está conectado la antena al terminal del
panel posterior del televisor?
Si utiliza una antena exterior, cerciórese
de que el cable no esté dañado.
Compruebe si hay interferencia local.
Desconecte el interruptor POWER y
vuelva a conectarlo después de
transcurrir un minuto.
Ajuste el control de COLOR.
Ajuste el control de MATIZ.
Verifique los productos externos de
Video/Audio, revise si hay fugas de
conexiones sueltas o rotas.
Compruebe el estado de las pilas del
mando a distancia.
Deslice CATV/DVD-TV/VCR selector
para situarlo sobre la posición TV.
Están bien conectados los cables de
sonido? Compruebe el nivel del volumen.
Está conectado el altavoz?
Desactive (OFF) el modo CLOSED
CAPTION / Desactive (OFF) el modo
Ahorro de Energía (Energy Save).
Desenchufe el televisor y vuelva a
enchufarlo despúes de dos minutos o más.
El vídeo o el reproductor de discos de
video no reproducen imágenes
El equipo de video/audio externo no
produce imágenes ni sonido
El mando a distancia no funciona
Barras en la pantalla
Imagen distorsionada
La imagen se desplaza verticalmente
No hay color
Mala recepción de algunos canales
Imagen débil
Franjas en la imagen
Imagen fantasma
Imagen borrosa
Sonido adecuado, imagen mala
Imagen adecuada, sonido malo
No hay imagen ni sonido
Imagen oscura y en blanco
Interferencia de ruido eléctrico externo
con el funcionamento del televisor
El color se ve distorsionado en parte de
la pantalla
Verifique estos puntos para ver si usted mismo puede solucionar el problema.
X
X
X X X X X X X X X X X X X X
X
X
X
X
X X X X X X X X X X X X X X
X
X
X
X
X X X X X X X X X X X X X X
X
X
X
X
X X X X X X X X X X X X X X
X
X
X
X
X X X X X X X X X X X X X X
X
X
X
X
X X X X X X X X X X X X X X
X
X
X
X
X X X X X X X X X X X X X X
X
X
X
X
X
X
X X X X X X X X X X X X X X
X X X X X X X X X X X X X X
X
X
X
X
X
X
X X X X X X X X X X X X X X
X
X
X
X
X X X X X X X X X X X X X X
X
X
X
X
X X X X X X X X X X X X X X
X
X
X
X
X X X X X X X X X X X X X
X
X
X
X
X X X X X X X X X X X X X X
X
X
X
X
X X X X X X X X X X X X X X
X
X
X
X
X X X X X X X X X X X X X X
X
X
Nota:
• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la
pantalla puede ponerse en blanco y negro. Si ocurriera ésto, ponga el
modo CLOSED CAPTION en OFF.
(Imagen oscura y en blanco)
Solicitud de servicio técnico
Para la localización del Servicio Técnico Autorizado de Sharp más próximo o para conseguir material de
información, repuestos o asistencia técnica, llame a 1-800-BE-SHARP.
53
52-53 27R-FS1.p65e
53
21/5/01, 6:06 PM
Specifications
MODEL
27R-FS1
Receiving System
NTSC
Stereo Broadcast
MTS/SAP
Reception Channels
AIR
VHF
2-13 ch
UHF
14-69 ch
CATV
1-125 ch
Channel Tuning
181-channel Reception PLL tuning system
Antenna Input Impedance
VHF/UHF 75 ohm Unbalanced
Screen Size
27˝ Diagonally Measured
Terminals
Audio/Video input x 3 (Front x 1, Rear x 2)
S-Video input x 2 (Front x 1, Rear x 1)
COMPONENT-IN x 1
Audio output x 1 (Rear)
Sound Output
5.0 W (RMS) x 2
Power Source
AC 120 V, 60 Hz
Power Consumption
134 W
Dimensions
287/16˝ (W) x 2229/64˝ (H) x 191/2˝ (D)
[722.0 mm (W) x 569.5 mm (H) x 494.5 mm (D)]
Weight (approx.)
103.6 lbs. (47.0 kg)
• Design and specifications are subject to change without notice.
54
54-56[Bk] 27R-FS1.p65e
54
21/5/01, 6:06 PM
Limited Warranty
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp
brand product (the “Product”), when shipped in its original container, will be free from defective
workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the
defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser
for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded
item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which
has been subjected to improper voltage or other misuse, abnormal service or handling, or which has
been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth
below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to
purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE
OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties
other than those described herein, or to extend the duration of any warranties beyond the time period
described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall
be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and
for the period of time described herein, shall constitute complete fulfillment of all liabilities and
responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction
of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp
be liable or in any way responsible, for any damages or defects in the Product which were caused by
repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be
liable or in any way responsible for any incidental or consequential economic or property damage.
Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion
may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
27R-FS1, 27 inch Color Television (Be sure to have
this information available when you need service for
your Product.)
Warranty Period for this Product:
One (1) year parts and labor. The warranty period
continues for an additional one (1) year, for a total
of two (2) years, with respect to the picture tube(s)
in the Product for parts only. Labor and service are
not provided free of charge for this additional period.
Additional Item(s) Excluded from
Warranty Coverage (if any):
Non-rechargeable batteries.
Where to Obtain Service:
From a Sharp Authorized Servicer located in the
United States. To find the location of the nearest
Sharp Authorized Servicer, call Sharp toll free at 1800-BE-SHARP.
What to Do to Obtain Service:
Contact your Sharp Authorized Servicer to obtain
in-home service for this Product. The Servicer will
come to your home and if it is necessary to remove
the Product, the Servicer will reinstall it. Be sure to
have Proof of Purchase available.
TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharp-usa.com
55
54-56[Bk] 27R-FS1.p65e
55
21/5/01, 6:06 PM
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
Printed in China
TINS-0081SEZZ
01P06-CCP
56
54-56[Bk] 27R-FS1.p65e
56
21/5/01, 6:06 PM