C054-E049E UniBloc technology and over 90 years of experience in precision weighing 1 AUW-D/AUW/AUX/AUY SERIES Shimadzu’s UniBloc technology and over 90 years of experience in precision weighing instruments bring analytical balances to a new level of stability, reliability and response. AUW-D models are the first five-decimal balances with this technology. 2 Shimadzu UniBloc Technology Shimadzu introduced one piece force cell technology for precision balances in 1989. The Today’s UniBloc is created by high-precision electric discharge wire processing applied to a block of aluminum alloy, and replaces the conventional electromagnetic balance sensor assembly. UniBloc’s compact, uniform structure ensures stable temperature characteristics, excellent response time and stable corner-load performance. The UniBloc design permits a consistancy of production that assures reliability and a long operational life. AUW-D dual range analytical balances are the first five-decimal balances with the advantages of UniBloc one-piece force cell technology. Reliability Stability Response Pan Parallel-guide to Coil Force-point spring Fulcrum spring Excellent Weighing Performance Fast Response Compact UniBloc mechanism and digital processing technology produce fast response and stability at the same time. Environmental adjustment Microprocessor digital control can be set to automatically provide the most suitable data processing for the installation environment and weighing application. Measurement Administration GLP/GMP/ISO9000 Conformance (AUW-D/AUW/AUX models) If an optional printer is connected, data can be printed out with the date and time. Sample ID and counting up numbers can also be attached to the data with EP-90 printer. Calibration report can be automatically output, ensuring the measuring control and traceability required by GLP/GMP/ISO9000. 3 AUW-D/AUW/AUX/ AUY SERIES SHIMADZU UNIBLOC ANALY TICAL BALANCES Automatic Span Calibration Span calibration is essential for accurate measurement in precision weighing to adjust for the effects of even small changes in ambient temperature. AUW-D/AUW/AUX models have a built-in motor driven calibration weight to automate this necessary operation. The balance can be set to take care of the calibration itself, leaving the operator to concentrate on measurement work. Room temperature change f Fully-automatic calibration by temperature detection: PSC The balance detects variations in the ambient temperature that influence accuracy and automatically performs calibration to compensate it. (AUW-D/AUW/AUX models) This great feature has been provided by Shimadzu since as early as 1985. Permissible sensitivity error Sensitivity is always below a maximum permissible error thanks to PSC. a Fully-automatic calibration at user pre-set times: Clock-CAL The balance automatically performs calibration at selected times, up to three times a day (e.g., before starting work, during lunch-break, or after work). (AUW-D/AUW models) Sensitivity error Room temperature change Calibrations + 0 – 8:00 12:30 17:00 Automatic calibration at user-preset times b Span calibration at any time : Touch-key calibration Automated calibration can be started by pressing keys. (AUW-D/AUW/AUX models) Also, your external calibration weights can be used for span calibration. (All models) Application Support Efficient filling or dosing work “Pouring mode” brings very fast response with even a very small amount of sample added. Suitable for filling or dosing works. Formulation mode Convenient for making many measurements of minute samples and seeking the total mass. Specific Gravity Specific Gravity Measurement Installing the optional SMK-401 specific gravity kit transforms the balance into a dedicated instrument for measuring specific gravity or density. Specific gravity measurement software is already installed in the Shimadzu balance. Below-weigh Hook for Hanging Measurement Measurement which cannot be performed within the weighing chamber is possible using the hook provided as a standard component. PCS Piece Counting and Unit Conversion In addition to piece counting, the balance can also perform weight measurement as percentages and in a variety of mass units, such as carat. ＊with optional AKB-301 Application Keyboard 4 Interval Timer Data can be automatically output at time intervals set in the range from 1 second to 99 minutes 59 seconds. This function can be also combined with WindowsDirect. (AUW-D/AUW/AUX models) 4 User-friendly Features WIDE User-friendly Weighing Chamber The large dimensions of the weighing chamber allow easy measurement of even tall flasks. Equalization in temperature before measurement is essential in precision weighing. This is easy with the extra space allowing samples to be kept inside the chamber. Weighing work is made easy by the smooth door movement.The doors can be detached to allow the chamber to be cleaned with ease and it is also possible to remove,clean or replace the door rail. Easy Level Adjustment Level adjustment, particularly important in installing an analytical balance, can be performed with ease using an easy-to-view level gauge at the front of the balance and large level screws. Metal Housing The aluminum die-cast housing offers lasting high quality exterior, protection of the core mechanism, and ease of cleaning / Backlit Display Allows use under poor lighting conditions (AUW models) Pi Comfortable Key Operation The embossed key panel sheet provides clear clicking response when operated. If you choose,the key operations are confirmed with a gentle beeping sound, too. g Analog Bar Graph Display The analog display allows the operator to see at a glance how much more can be loaded before reaching the weighing capacity. In-use protective cover Keeps dirt away from key panel and display. 5 AUW-D/AUW/AUX/ AUY SERIES SHIMADZU UNIBLOC ANALY TICAL BALANCES Data directly jumps to your Windows® application Shimadzu’s unique offer: the weighed result on the balance’s display is “typed” at the cursor position or activated cell in any application on Windows®. This advantage requires no software installation. A cable is all that you need. WindowsDirect Experience it! • Place the cursor at the desired position in your Windows Test sample A • The weighed result will be directly typed there. (2) 060315-07 Test sample A Sent as if typed from the computer keyboard ! 060315-07 7.80315 Any application on Windows® : e.g. Excel, Word etc. All that you need to add is just one cable! No communication software is required! (1) Press [PRINT] key • Press the [PRINT] key on the balance. PRINT If you'd like to use "WindowsDirect" with "Windows VISTA" "Windows 7", or USB port, please contact to our distributors. Expanding Possibilities with a Wide Range of Accessories (Optional) Name Specification 2-WAY IONIXER (Static Remover)STABLO EX Secure static removal Air blower switched ON / OFF Electronic Printer EP-80 Impact-dot print, Can be used with WindowsDirect, Electronic Printer EP-90 Impact-dot print, Can be used with WindowsDirect, Statistical calculation, Sample No. can be attached, Date/time can be attached (except for AUY) Specific Gravity Measurement Kit SMK-401 This kit makes it possible to determine specific gravity or density of solids with the highly precise immersion method. Samples with weights up to the weight capacity of the balance can be measured. RS-232C Cable Required to connect to a PC. Application Keyboard AKB-301 Enables unit weight settings for piece counting, unit weight display, recalculation of piece with new unit weight, taring and output of currently displayed value. Other numerical settings can also be performed more efficiently. Foot switch FSB-102PK For hands-free tare command (key connector) Foot switch FSB-102TK For hands-free print command (key connector) EP-80 EP-90 SMK-401 AKB-301 Consumables and Replacement Name Specification In-use Protective Cover (standard accessory) Cover for display (1 cover provided as standard accessory; 5 covers in a set) Printer paper for EP-80 / EP-90 (20 rolls) Ink ribbon cartridge for EP-80 / EP-90 Standard type, black ink (5 pieces) Ink ribbon cartridge for EP-80 / EP-90 Long life type, black ink (5 pieces) 6 SHIMADZU UNIBLOC ANALY TICAL BALANCES AUW-D/AUW/AUX /AUY SERIES AUW-D AUW AUX AUY Specifications Series AUW-D (dual range semi-micro) AUW220D Model Capacity Minimum display AUW AUW120D AUX AUY AUW320 AUW220 AUW120 AUX320 AUX220 AUX120 AUY220 AUY120 220g/82g 120g/42g 320g 220g 120g 320g 220g 120g 220g 120g 0.1mg/0.01mg 0.1mg/0.01mg 0.1mg 0.1mg 0.1mg 0.1mg 0.1mg 0.1mg 0.1mg 0.1mg ≤0.1mg ≤0.15mg ≤0.1mg ≤0.1mg ≤0.1mg ≤0.1mg Repeatability (Standard deviation, σ) ≤0.1mg (large range) ≤0.1mg (large range) ≤0.05mg (small range) ≤0.02mg (small range) ≤0.15mg ≤0.1mg Linearity ±0.2mg (large range) ±0.2mg (large range) ±0.3mg ±0.2mg ±0.2mg ±0.3mg ±0.3mg ±0.2mg ±0.2mg ±0.2mg ±0.1mg (small range) ±0.03mg (small range) 3s (Large range), 15s (small range) Response time (typical) 3s (Large range), 12s (small range) Operating ambient temperature 3s 5 to 40 ˚C Temperature coefficient of sensitivity (10 to 30˚C) ±2ppm/˚C ±2ppm/˚C (When PSC is Off) Sensitivity stability against temperature change (When PSC is On, 10to 30˚C) ±2ppm 80mm dia approx. Pan size 220mmW × 330mmD × 310mmH approx. Body dimensions Weight 7kg approx. Power consumption 7VA approx. Backlighted Display ● ● ● Built-in calibration weight ● ● ● ● ● ● ● ● PSC ● ● ● ● ● ● ● ● Clock-CAL ● ● ● ● ● Built-in Clock ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Interval timer output ● ● ● ● ● ● ● ● RS-232 I/F ● ● ● ● ● ● ● ● ● ● Specific gravity measurement software, piece counting, % display ● ● ● ● ● ● ● ● ● ● Analog display ● ● ● ● ● ● ● ● ● ● GLP/GMP/ISO Calibration Report Functions WindowsDirect and features Formulation mode ＊Windows and Excel are trademarks of Microsoft Corporation. SHIMADZU CORPORATION. International Marketing Division 3. Kanda-Nishikicho 1-chome, Chiyoda-ku, Tokyo 101-8448, Japan Phone: 81(3)3219-5641 Fax: 81(3)3219-5710 http://www.shimadzu.com/ SHIMADZU SCIENTIFIC INSTRUMENTS, INC. 7102, Riverwood Drive, Columbia, Maryland 21046, U.S.A. Phone: 1(410)381-1227 Fax: 1(410)381-1222 http://www.ssi.shimadzu.com/ SHIMADZU (ASIA PACIFIC) PTE LTD. 79 Science Park Drive, #02-01/08, Cintech IV, Singapore Science Park 1, Singapore 118264 Phone: (65)6778-6280 Fax: (65)6779-2935 http://www.shimadzu.com.sg/ SHIMADZU EUROPA GmbH Albert-Hahn-Strasse 6-10, 47269 Duisburg, F.R. Germany Phone: 49(203)7687-0 Fax: 49(203)7666-25 http://www.shimadzu.eu/ SHIMADZU INTERNATIONAL TRADING (SHANGHAI) CO., LTD. PUXI BRANCH Block E, No. 570 West Huaihai Road, Shanghai 200052 P.R. China Phone: 86(21)2201-3888 Fax: 86(21)2201-3666 http://www.shimadzu.com.cn/ Printed in Japan 4595-04102-30ANS SHIMADZU DO BRASIL COMERCIO LTDA. Avenida Marques de Sao Vicente, 1771 Barra Funda CEP: 01139-003 - Sao Paulo, SP – Brazil Phone: 55(11)2134-1688 Fax: 55(11)3611-2209 http://www.shimadzu.com.br/ SHIMADZU MIDDLE EAST & AFRICA FZE UAE HEAD OFFICE Warehouse No. RA08UC02, Jebel Ali, Dubai P.O. BOX 262081 United Arab Emirates Phone: 971(4)883-6668 Fax: 971(4)883-6808 SHIMADZU SCIENTIFIC INSTRUMENTS (OCEANIA) PTY. LTD. Unit F, 10-16 South Street, Rydalmere N.S.W. 2116, Australia Phone: 61(2)9684-4200 Fax: 61(2)9684-4055 http://www.shimadzu.com.au/ Sysmex Nederland B.V. P.O. Box 251, 4870 AG Etten-Leur Phone +31 (0)76 508 6000 Fax +31 (0)76 508 6086 Sysmex Belgium N.V. Park Rozendal, Building A Terhulpsesteenweg 6a, 1560 Hoeilaart, Belgium Phone +32 (0)2 769 7474 . Fax +32 (0)2 769 7499 The contents of this brochure are subject to change without notice.