BenQ PB2220/ PB2120 User`s manual

PB2220/ PB2120
Digital Projector
User’s Manual
Welcome
Downloaded From projector-manual.com BenQ Manuals
Copyright
Copyright 2003 by BENQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of this company.
Disclaimer
BENQ Corporation makes no representations or warranties, either expressed or implied, with respect
to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any
particular purpose. Further, BENQ Corporation reserves the right to revise this publication and to
make changes from time to time in the contents hereof without obligation of this company to notify
any person of such revision or changes.
*Windows, Internet Explorer and Outlook Express are trademarks of Microsoft Corporation. Others
are copyrights of their respective companies or organizations.
Downloaded From projector-manual.com BenQ Manuals
Table of Contents
Important Safety Instructions ............................... 1
Introduction ........................................................... 4
Projector Features ................................................................ 4
Shipping Contents ............................................................... 5
Optional Accessories
...................................................................... 5
Projector Descriptions ........................................................ 6
Front View ........................................................................................ 6
Left View ........................................................................................... 6
Back View ........................................................................................... 6
External Control Panel ....................................................... 7
Adjuster ................................................................................ 8
Remote Control Description .............................................. 8
Your Remote Control at a Glance ................................................... 8
Remote Control Effective Range ...................................................... 9
Remote Control Features .................................................................. 9
Installing or Replacing Batteries ..................................................... 10
Installation............................................................ 11
Screen Size .......................................................................... 11
Connecting to Various Equipment .................................. 12
Operation ............................................................. 13
Start Up .............................................................................. 13
Digital Keystone Correction ............................................. 14
Auto Adjustment ............................................................... 14
Source Selection ................................................................. 15
Menu System ..................................................................... 15
1. Display Menu ............................................................................. 16
2. Image Menu ................................................................................ 17
3. Source Menu ............................................................................... 18
4. Control Menu .............................................................................. 19
5. PIP Menu ..................................................................................... 19
Shutdown ........................................................................... 20
Maintenance......................................................... 21
Lamp Information ............................................................. 21
Downloaded From projector-manual.com BenQ Manuals
Table of Contents
iii
Use and Replacement of Lamp ....................................................... 21
LED Status Indicators ..................................................................... 21
Lamp Replacement ............................................................22
Resetting Lamp Hours .......................................................23
Service Information ...........................................................24
Accessories (Included in the standard package) ........................... 24
Optional Accessories (Not included in the standard package) ... 24
Ordering Parts or Getting Information .......................................... 24
Troubleshooting................................................... 25
Common Problems & Solutions .......................................25
Status Messages ................................................................26
Specifications........................................................ 27
Projector Specifications .....................................................27
Timing Chart ......................................................................28
Supported timing for PC input ....................................................... 28
Supported timing for YPbPr input ................................................. 28
Supported timing for Video and S-Video inputs .......................... 29
Dimensions........................................................... 30
Warranty............................................................... 31
Limited Warranty ...............................................................31
Safety Regulations ................................................ 32
FCC Statement ...................................................................32
EEC Statement ...................................................................32
MIC Statement ...................................................................32
iv
Table of Contents
Downloaded From projector-manual.com BenQ Manuals
Important Safety Instructions
Caution
•
To prevent shock, do not open the
cabinet. No user-serviceable parts
inside.
•
Please read this user’s manual before
you operate your projector. Save this
user’s manual for future reference.
•
Do not look straight at the projector
lens during operation. The intense
light beam may damage your eyes.
Downloaded From projector-manual.com BenQ Manuals
•
Refer servicing to qualified service
personnel.
•
Always open the lens shutter or
remove the lens cap when the
projector lamp is on.
•
In some countries, the line voltage is
NOT stable. This projector is designed
to operate safely within a bandwidth
of 100 to 240 volts, but could fail if
power cuts or surges of ±10 volts
occur. In these high-risk areas, it is
recommended to install a power
stabilizer unit.
Important Safety Instructions
1
Safety Instructions
1.
2.
The lamp becomes extremely hot during operation. Allow the projector to
cool for approximately 45 minutes
prior to removing the lamp assembly
for replacement.
4.
Do not place this product on an
unstable cart, stand, or table. The
product may fall, sustaining serious
damage.
5.
To reduce the risk of electric shock, do
not disassemble this appliance.
Do not operate lamps beyond the
rated lamp life. Excessive operation of
lamps beyond the rated life could
cause them to explode on rare occasions.
*Take it to a qualified technician when
service or repair is required. Incorrect
reassembly can cause electric shock when
the appliance is subsequently used.
3.
2
Never replace lamp assembly or any
electronic components unless the projector is unplugged.
Important Safety Instructions
Downloaded From projector-manual.com BenQ Manuals
6.
This product is capable of displaying
inverted images for ceiling mount
installation. Please use BenQ’s Ceiling
Mounting Kit for mounting the unit
and ensure it is securely installed.
Safety Instructions (Continued)
7.
Do not block the ventilation holes.
9.
- Do not place this unit on a blanket or
other bedding.
- Do not cover this unit with a cloth.
- Do not place any inflammables near the
ventilation holes.
If the ventilation holes are seriously
obstructed, overheating inside the unit
may result in a fire.
8.
Always place the unit on a level, horizontal surface during operation.
- Do not use if tilted at an angle of more
than 10 degrees left to right, nor at angle
of more than 15 degrees front to back.
Using the unit when it is not fully
horizontal may cause a malfunction of, or
damage to, the lamp.
10.
Do not stand the unit on end vertically.
Do not place this unit in any of the following environments.
- Space where is poorly ventilated or
confined. Allow at least 50 cm clearance
from walls.
- Locations where temperatures may
become excessively high, such as the inside
of a car with all windows rolled up.
- Locations where excessive humidity, dust,
or cigarette smoke may contaminate
optical components, shortening the
projector’s lifespan and darkening the
11.
screen.
- Locations near fire alarms
Doing so may cause the unit to fall over,
causing injury or resulting in damage to
the unit.
Do not step on this unit or place any
objects upon it.
Besides probable physical damage to the
unit, doing so may result in accidents and
possible injury.
Downloaded From projector-manual.com BenQ Manuals
Important Safety Instructions
3
Introduction
Projector Features
The projector integrates high performance optical engine projection and user-friendly
design to deliver high reliability and ease of use.
The Projector offers the following features:
•
•
•
•
•
•
•
•
•
•
•
Compact and portable unit
Full-function remote control
Manual zoom lens
One key auto-adjustment to display the best picture quality
Easy digital keystone correction through hot keys to correct tilted pictures
Adjustable color balance control for data/video
Ultra-high brightness projection lamp
Ability to display high quality 16.7 million colors
On screen menus in 10 languages: English, French, German, Italian, Spanish,
Portuguese, Traditional Chinese, Simplified Chinese, Japanese and Korean.
Powerful AV function to provide high AV picture results.
HDTV compatibility (YPbPr)
The brightness of your machine will vary depending on the ambient room conditions and contrast/brightness settings.
4
Introduction
Downloaded From projector-manual.com BenQ Manuals
Shipping Contents
The projector is shipped with the necessary cables required for standard PC or laptop computer connections. Carefully unpack and verify that you have all the items shown below. If
any of these items are missing, please contact your place of purchase.
PB2220
/ PB2120
Digital
Proje
User’s Mau ctor
nal
Projector
User’s Manual
Remote Control
Batteries
User’s Manual CD
S-Video Cable
Video Cable
VGA Cable
EU
US
Power Cord 110V
Power Cord 220V
Quick Start Guide
Warranty Booklet
3-2 Converter
Audio Cable
UK
Power Cord 240V
Optional Accessories
1.
3.
5.
Spare lamp kit
HDTV cable
Presentation Pro
Downloaded From projector-manual.com BenQ Manuals
2.
4.
Macintosh adaptor
Ceiling mount kit
Introduction
5
Projector Descriptions
Front View
IR remote sensor
Projection lens
Ventilation grill
Left View
AC power cord
input
S-Video
connector
Audio input
Video connector
D-Sub connector
(for computer/ HDTV input)
Back View
IR remote sensor
Rear adjustment foot
Ventilation grill
6
Introduction
Downloaded From projector-manual.com BenQ Manuals
External Control Panel
Exit
Keystone/ Right
Keystone/ Left
Menu
POWER
AUTO
SOURCE
•
•
•
•
•
•
•
•
Lamp Status Indicator
Press and hold POWER for 1 second to turn the projector on or off.
When the projector is on, Back-lit POWER will blink during warm-up and turn to
solid green to indicate the projector is ready for use.
The Infrared Remote Receiver (Front and Rear) allows the projector to accept signals
from the remote control. For best results, be sure to aim the control toward the sensor
without any obstructions between the two, and at a distance no greater than 6 meters.
Menu will display the menu system on screen. Press Menu again to access the submenus. Left and Right help you navigate among choices and settings in the menus and
sub-menus. However, when the on screen menu is not activated, the Left and Right
buttons will function as Keystone +/- hot keys.
Press the Exit button to go back to the main menu. Press Exit again to leave the menu
system.
The Lamp Status Indicator will flash or light up when the lamp needs service, cooling
or replacement. See°uLamp Information°von page 21 for more detailed information.
AUTO key: Automatically sense the best picture quality for current received signals.
SOURCE key: Select signal sources from among PC, Video, S-Video and YPbPr, when
several input sources are available.
Downloaded From projector-manual.com BenQ Manuals
Introduction
7
Adjuster
The projector is equipped with a quick-release adjuster foot and button for adjusting its tilt
angle.
1.
2.
Lift the projector up and press the
adjuster button to release the
adjuster.
The adjuster will drop into position and be locked.
3.
To stow the adjuster, depress the
release button and push the adjuster
back to where it is.
3
1
2
Remote Control Description
Your Remote Control at a Glance
SOURCE AUTO
POWER
EXIT
KEYSTONE
MENU
BLANK
MUTE
PIP VIDEO
PIP S-VIDEO
8
Introduction
Downloaded From projector-manual.com BenQ Manuals
ZOOM IN
ZOOM OUT
FREEZE
RETURN
VOLUME
Remote Control Effective Range
The remote sensors are located on the front and the back of the projector. It can function in
a range of 30 degrees horizontally and 30 degrees vertically relative to a line that is a right
angle to the remote sensors. The distance between the remote control and the remote sensors must be shorter than 6 meters (19.5 feet).
Remote Control Features
FREEZE
The image can be frozen when FREEZE is
pressed. An icon
will appear in the
lower right corner of the screen for three
seconds. To release the freeze function,
press the FREEZE button, RETURN button
or SOURCE button (when the input source
is switched over during display) again. A
“Play” icon will appear in the lower right
corner of the screen for three seconds when
the freeze function is released.
ZOOM IN/OUT
By pressing ZOOM , the center of the
picture will be magnified. When the + button is pressed again, the picture is further
magnified, up to four times the original
size. By pressing ZOOM ―, the size of the
image is reduced. When the - button is
pressed again, the picture is further reduced
until it is restored to its original size. To
return to the normal display mode, press
the RETURN button. (This function can be
used in combination with FREEZE. )
+
Downloaded From projector-manual.com BenQ Manuals
Introduction
9
Installing or Replacing Batteries
1.
Use a pointy-sided
stick to release the
barttery tray. Pull
the tray off.
2.
Install or replace a battery.
3.
Snap the battery tray back into
place.
Avoid excessive heat and humidity. There may be danger of an explosion if a battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
10
Introduction
Downloaded From projector-manual.com BenQ Manuals
Installation
Screen Size
Place the projector at the required distance from the screen according to the desired picture
size (see the table below).
tion
jec
Dis
tan
ce
Pro
PB2220 (XGA) screen size chart
Distance to Diagonal measurement
screen
Minimum
Maximum
zoom
zoom
feet
inches
inches
4
29.9
36.6
6
44.8
54.9
8
59.7
73.2
10
74.7
91.4
12
89.6
109.7
14
104.5
128.0
16
119.5
146.3
18
134.4
164.6
20
149.4
182.9
22
164.3
201.2
24
179.2
219.5
26
194.2
237.7
28
209.1
256.0
30
224.0
274.3
32
239.0
292.6
Downloaded From projector-manual.com BenQ Manuals
Distance to Diagonal measurement
screen
Minimum
Maximum
zoom
zoom
meters
cm
cm
1
62.2
76.2
1.5
93.3
114.3
2
124.5
152.4
2.5
155.6
190.5
3
186.7
228.6
3.5
217.8
266.7
4
248.9
304.8
4.5
280.0
342.9
5
311.2
381.0
5.5
342.3
419.1
6
373.4
457.2
6.5
404.5
495.3
7
435.6
533.4
7.5
466.7
571.5
8
497.8
609.6
Installation
11
PB2120 (SVGA) screen size chart
Distance to Diagonal measurement
screen
Minimum
Maximum
zoom
zoom
feet
inches
inches
4
23.5
28.7
6
35.2
43.1
8
47.0
57.5
10
58.7
71.9
12
70.4
86.2
14
82.2
100.6
16
93.9
115.0
18
105.7
129.4
20
117.4
143.7
22
129.1
158.1
24
140.9
172.5
26
152.6
186.9
28
164.3
201.2
30
176.1
215.6
32
187.8
230.0
Distance to Diagonal measurement
screen
Minimum
Maximum
zoom
zoom
meters
cm
cm
1
48.9
59.9
1.5
73.4
89.8
2
97.8
119.8
2.5
122.3
149.7
3
146.7
179.7
3.5
171.2
209.6
4
195.7
239.6
4.5
220.1
269.5
5
244.6
299.5
5.5
269.0
329.4
6
293.5
359.4
6.5
317.9
389.3
7
342.4
419.3
7.5
366.8
449.2
8
391.3
479.1
Connecting to Various Equipment
It only takes a few seconds to connect your projector to your computer/notebook, VCR or
other systems. However, a Mac adapter (an optional accessory) is needed for connection for
Macintosh users.
Computer /
HDTV
S-Video /
Video
Audio
Video
S-Video
12
Installation
Downloaded From projector-manual.com BenQ Manuals
Operation
Start Up
1.
Plug the power cord into a wall socket.
2.
Press and hold POWER for 1 second.
The back-lit POWER key blinks green and stays green when the power is turned on.
When the power is turned off, there is a 90-second cooling period before the projector can be
re-started.
3.
Switch on all connected equipment.
Downloaded From projector-manual.com BenQ Manuals
Operation
13
Digital Keystone Correction
Keystoning is when the projected image
is noticeably wider at either the top or
bottom. To correct this, press KEYSTONE +/- (hot key) on the control
panel of the projector or on the remote
control, then adjust the sliding bar
labeled Keystone, as needed. Press + to
correct keystoning at the top of the
image. Press - to correct keystoning at
the bottom of the image.
Auto Adjustment
In some cases, you may have to optimize the
picture quality manually. To do this, press the
AUTO key on the control panel of the projector or on the remote control. Within 3 seconds, the built-in Intelligent Auto Adjustment
function will re-adjust the image to the best
picture quality.
14
Operation
Downloaded From projector-manual.com BenQ Manuals
Source Selection
When several input sources are available, press
SOURCE key to make a selection from the
control panel of the projector or the remote
control.
Menu System
Press Menu for the main menu and press 3or
to select items in the sub-menu.
4 to select a sub-menu. Press Menu again
Menu Bar
Sub-menu
Display
Image
Source
Control
PIP
PC
Keystone
Brightness
Contrast
Phase
H Size
Auto Resize
H Position
V Position
Color Temp
Information
Ratio
Color
Tint
Color Temp
Ratio
System
Sharpness
Color Temp
Information
Mirror
Source Scan
Volume
Treble
Bass
Mute
Langauge
OSD
OSD Time
Auto Off
Reset
Lamp Hour
Main page:
PIP Source
PIP Size
PIP Pos.
H Position
V Position
More Options
Y/Pb/Pr
Video
Keystone
Brightness
Contrast
Color
Tint
Sub Page:
Brightness
Contrast
Color
Tint
Sharpness
S-Video
Downloaded From projector-manual.com BenQ Manuals
Operation
15
1. Display Menu
FUNCTION
DESCRIPTION
Corrects the keystone of the image.
Keystone
Adjusts the brightness of the image.
Brightness
Adjusts the degree of difference between darkness and lightness of the
image.
Contrast
Adjusts to fit in the desired image size.
Phase
*This function is available only when the input mode is PC or YPbPr.
H Size
Color
Tint
16
Operation
Adjusts to avoid the occurrence of flicker.
*This function is available only when the input mode is PC or YPbPr.
Adjusts to increase or decrease the colors (R, G, B) of image.
*This function is not available when the input mode is PC.
Adjusts to make the image look more red or blue.
*This function is not available when the input mode is PC.
Downloaded From projector-manual.com BenQ Manuals
2. Image Menu
FUNCTION
DESCRIPTION
Makes the best fit of the image to the screen,
Auto Resize
1. On 2. Off 3. 16:9
*This function is available only when the input mode is PC .
Users have 2 options for the image ratio.
Ratio
1. 4 : 3
2. 16 : 9
*This function is available when the input mode is YPbPr, Video or SVideo.
Adjusts the horizontal position of the image.
H Position
*This function is available only when the input mode is PC.
Adjusts the vertical position of the image.
V Position
*This function is available only when the input mode is PC.
Color Temp.
Adjusts the color temperature to fit your preference.
Information
Shows the current resolution.
System information will be shown as:
System
1. NTSC 2. PAL 3. SECAM 4. YUV
*This function is available only when the input mode is Video or S-Video.
Sharpness
Color
Tint
Adjusts to make the image look sharper or softer.
*This function is available only when the input mode is Video or S-Video.
Adjusts to increase or decrease the colors (R, G, B) of the image.
*This function is not available when the input mode is PC.
Adjusts to make the image look more red or blue.
*This function is not available when the input mode is PC.
Downloaded From projector-manual.com BenQ Manuals
Operation
17
3. Source Menu
FUNCTION
DESCRIPTION
2. Ceiling-mounted projection
1. Default
Mirror
3. Rear screen projection
4. Ceiling-mounted and rear
screen projection.
Source Scan
If Source Scan is on, all the input sources will be detected during the
start-up process. Otherwise, the projector will only detect the last input
source.
Adjusts the volume level.
Volume
Adjusts the treble level.
Treble
Adjusts the bass level.
Bass
Off
On
Mute
18
Operation
Downloaded From projector-manual.com BenQ Manuals
4. Control Menu
FUNCTION
DESCRIPTION
Language sets the OSD to display in one of 10 languages.
Language
Use 3 / 4 key to select the languages: English, French, German, Italian,
Spanish, Portuguese, Traditional Chinese, Simplified Chinese, Japanese
and Korean.
Selects a desired OSD position.
OSD
Auto Off
Sets the length of time the OSD will remain active after the last time you
pressed the button. The range is from 5 to 60 seconds in 5-second
increments.
Sets the length of time to shut off the system when no input is detected.
Reset
Returns all settings to the time of manufacturing.
Lamp Hour
Shows lamp usage time.
OSD Time
5. PIP Menu
These functions are valid only when the input mode is PC and the PIP source is Video or SVideo.
FUNCTION
PIP Source
PIP Size
DESCRIPTION
Selects the source from which the PIP picture comes.
Uses 3 / 4 key to scroll through the 4 alternatives: Off, Small,
Medium, Large.
When the resolution of the PC signal is 1280x1024 (SXGA), the
selected Large PIP size will be reduced to the Medium size.
PIP Position
Selects a desired PIP position.
H Position
Adjusts the horizontal position of PIP image.
V Position
Adjusts the vertical position of PIP image.
More Options
Brightness
Uses 3 / 4 key to select more PIP functions including Brightness,
Contrast, Color, Tint, Sharpness and System.
Adjusts the brightness of PIP image.
Color
Adjusts the degree of difference between darkness and lightness of PIP
image.
Adjusts to increase or decrease the colors (R, G, B) of the image.
Tint
Adjusts to make the image look more red or blue.
Sharpness
Adjusts to make the image look sharper or softer
Contrast
Downloaded From projector-manual.com BenQ Manuals
Operation
19
Shutdown
1.
Press and hold POWER and a warning message will prompt up. To turn off the projector, Press POWER again.
2.
3.
The fan will continue to run for approximately 90 seconds.
Disconnect the power cord from the wall socket.
Please do not unplug the power cord before POWER is shut down or during the 90-second
cooling process.
20
Operation
Downloaded From projector-manual.com BenQ Manuals
Maintenance
Lamp Information
Use and Replacement of Lamp
When the Lamp Indicator lights up red or a message appears to suggest the time of lamp
replacement, please install a new lamp or consult your dealer. An old lamp could cause a
malfunction in the projector and may explode.
LED Status Indicators
Lamp Life Indicators
CHANGE THE LAMP,
AND RESET THE
LAMP TIMER
CHANGE THE LAMP.
THE POWER WILL
TURN OFF AFTER 20
HOURS
CHANGE THE LAMP!
Lamp is not properly
attached
When this LED shows red continuously, it is warning you
that the lamp life has exceeded 2000 hours. Replace the projection lamp with a new one immediately.
The lamp has been in operation for 1900 hours. Change a
new lamp for optimal performance.
The lamp has been in operation for 1980 hours, and the
power will turn off after 20 hours.
The lamp has been in operation for over 2000 hours. The
warning message will display for 30 seconds every 5 minutes
after you turn on the projector and the power will turn off
automatically in 10 minutes.
LED blinks rapidly.
When the projector’s internal temperature is too high to
operate safely, the LED blinks slowly for one minute and the
Temperature is too high lamp turns off automatically.
If the LED light is off, the projector’s lamp and temperature
are operating under normal conditions.
The LAMP indicator will light up if the lamp becomes too hot. Turn off the power and let the
projector cool for 45 minutes. If the LAMP indicator is still red when turning the power on,
please contact your dealer.
Downloaded From projector-manual.com BenQ Manuals
Maintenance
21
Lamp Replacement
To reduce the risk of electrical shock, always turn off the projector and disconnect the power
cord before changing the lamp.
1.
Press the POWER button to switch off the projector. Disconnect the power cord
from the outlet and the projector.
2.
Loosen the screw and remove the
lamp cover. If the lamp is hot, avoid
burns by waiting 45 minutes until
the lamp has cooled.
3.
Loosen the 3 screws. (It is strongly
recommended you use a magneticheaded screwdriver.) Pull the handle
to remove the lamp housing. If the
screws are not loosened completely,
they could injure your fingers. Do
not insert your hand into the box
after the lamp is removed. If you
touch the optical parts inside, this
could cause color unevenness.
4.
Replace the lamp with a new one.
Insert it into the projector, and
tighten the screws firmly. Loose
screws may cause a bad connection,
which may result in malfunction.
5.
Re-install the lamp cover and tighten
the screw. Do not turn on the power
with the lamp cover removed.
Whenever the lamp is replaced, reset
the total lamp operation time. Do
not reset if the lamp is not replaced
as this could cause breakage.
To reduce the risk of severe burns, allow
the projector to cool for at least 45 minutes
before replacing the lamp.
To reduce the risk of injuries to fingers and
damage to internal components, use caution when removing lamp glass that has
shattered into sharp pieces.
To reduce the risk of injuries to fingers
and/or decreasing image quality by touching the lens, do not touch the empty lamp
compartment when the lamp is removed.
This lamp contains mercury. Consult your
local hazardous waste regulations to dispose of this lamp in a proper manner.
22
Maintenance
Downloaded From projector-manual.com BenQ Manuals
Resetting Lamp Hours
If you replace the lamp after 2000 hours of operation, please follow the instructions below
within 10 minutes of power on.
OSD
FUNCTION
Press the Exit button on the projector for 3
seconds to display the total used lamp time.
•
•
Downloaded From projector-manual.com BenQ Manuals
Press the MENU button on the
projector during the lamp hour
message. An adjustment message will
appear.
Press W or X to reset lamp hours or
press EXIT to leave.
Maintenance
23
Service Information
Accessories (Included in the standard package)
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Part Number
Power cord (EU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.01218.191
Power cord (US). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.01118.311
Power cord (UK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.02718.201
VGA cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J0508.503
Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J1303.501
S-Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.72920.011
PC - PC audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.L4302.501
RCA R/W - audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J1311.001
Soft carrying case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98.J2202.001
Remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98.J2406.001
3-2 converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.91007.001
Optional Accessories (Not included in the standard package)
Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Part Number
Mac adapter (switchable) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.20118.A15
Spare lamp kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60.J2203.CB1
HDTV cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J2401.001
Ceiling mount kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60.J2439.011
Presentation Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60.J2278.001
Ordering Parts or Getting Information
For product information, product assistance, service information, or to order accessories,
please contact BENQ Corporation at http://www.BenQ.com.
24
Maintenance
Downloaded From projector-manual.com BenQ Manuals
Troubleshooting
Common Problems & Solutions
NO POWER
TRY THESE SOLUTIONS
•
•
•
Plug the power cord into the AC inlet.
Plug the power cord into the power inlet.
Wait two minutes after the projector is turned off before turning the projector back on.
NO PICTURE
TRY THESE SOLUTIONS
•
•
•
•
Check for the proper input source.
Ensure all cables are connected properly.
Adjust the brightness and contrast.
Remove the lens cap.
TRAPEZOID IMAGE ON THE SCREEN
TRY THESE SOLUTIONS
•
•
Reposition the unit to improve its angle on the screen.
Use the Keystone correction key on the control panel of the projector or the remote
control unit.
POOR COLOR
TRY THESE SOLUTIONS
•
•
Select the correct video system.
Adjust brightness, contrast, or saturation.
BLURRED IMAGE
TRY THESE SOLUTIONS
•
•
•
•
Press Auto on the control panel of the projector or the remote control unit to get better
picture quality.
Adjust the focus.
Reposition the unit to improve its projection angle.
Ensure the distance between the unit and screen is within the adjustment range of the
lens.
REMOTE CONTROL DOES NOT WORK
TRY THESE SOLUTIONS
•
•
•
•
Replace the batteries with new ones.
Make sure there is no obstacle between the remote control and the unit.
Stand within 6 meters (19.5 feet) of the projector.
Make sure nothing blocking the front and rear receivers.
Downloaded From projector-manual.com BenQ Manuals
Troubleshooting
25
Status Messages
On Screen Messages
SEARCHING
26
Description
Projector is searching for input.
INPUT SIGNAL
DETECTED,
ACTIVATING AUTO
IMAGE
Projector has identified the input signal and is running the auto
image adjustment function.
SYNC IS OUT OF
RANGE
Input signal frequency exceeds the projector’s range.
CHANGE THE LAMP,
AND RESET THE
LAMP TIMER
The lamp has been in operation for 1900 hours. Lamp replacement is recommended.
CHANGE THE LAMP,
THE POWER WILL
TURN OFF AFTER 20
HOURS
The lamp has been in operation for 1980 hours, and the power
will turn off after 20 more hours. Replace the lamp as soon as
possible.
CHANGE THE
LAMP!
The lamp has been in operation for over 2000 hours, and the
power will turn off automatically in 10 minutes. Replace the
lamp immediately.
Troubleshooting
Downloaded From projector-manual.com BenQ Manuals
Specifications
Projector Specifications
Note: All specifications are subject to change without notice.
General
Model name
PB2220
PB2120
1024X768 XGA
800X600 SVGA
Optical
Display system
Lens F/Number
Lamp
1-CHIP DMD
F/2.4 ~ 2.6
150W VIP lamp
Electrical
Power supply
Power consumption
AC100 ~ 240V, 2.3A, 50/60 Hz (Automatic)
220 W (Max)
Mechanical
Dimensions
Operating Temperature
range
Weight
220 mm (W) x 52 mm (H) x 175 mm (D)
0°C ~ 35°C
3.92 lbs (1.78 Kg)
Input terminal
Computer Input
RGB/ HDTV Input
Video Signal Input
S VIDEO
VIDEO
Audio Signal Input
Audio
D-sub 15-pin (female)
Mini DIN 4-pin terminal
RCA Jack terminal
Mini Jack Stereo Terminal
Output
Speaker
0.5 Watt x 1
Downloaded From projector-manual.com BenQ Manuals
Specifications
27
Timing Chart
Supported timing for PC input
Resolution
720x400
640x480
800x600
832x624
1024x768
1152x864
1280x960
1280x1024
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel
Frequency
(MHz)
Mode
37.927
31.469
37.861
37.500
43.269
35.156
37.879
48.077
46.875
53.674
49.725
35.522
48.363
56.476
60.023
68.667
60.134
67.500
60.000
63.981
85.039
59.940
72.809
75.000
85.008
56.250
60.317
72.188
75.000
85.061
74.550
86.957
60.004
70.069
75.029
84.997
74.700
75.000
60.000
60.020
35.500
25.175
31.500
31.500
36.000
36.000
40.000
50.000
49.500
56.250
57.283
44.900
65.000
75.000
78.750
94.500
79.857
108.000
108.000
108.000
720x400_85
VGA_60
VGA_72
VGA_75
VGA_85
SVGA_56
SVGA_60
SVGA_72
SVGA_75
SVGA_85
MAC16”
XGA_43i
XGA_60
XGA_70
XGA_75
XGA_85
MAC19”
SXGA1_75
QuadVGA_60
SXGA3_60
Supported timing for YPbPr input
28
Signal Format
Horizontal Frequency
(kHz)
Vertical Frequency (Hz)
480i(525i)@60Hz
480p(525p)@60Hz
576i(625i)@50Hz
576p(625p)@50Hz
720p(750p)@60Hz
720p(750p)@50Hz
1080i(1125i)@60Hz
1080i(1125i)@50Hz
15.73
31.47
15.63
31.25
45.00
37.50
33.75
28.13
59.94
59.94
50.00
50.00
60.00
50.00
60.00
50.00
Specifications
Downloaded From projector-manual.com BenQ Manuals
Supported timing for Video and S-Video inputs
Video mode
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Frequency
(MHz)
NTSC
PAL
SECAM
PAL-M
PAL-N
PAL-60
NTSC4.43
15.73
15.63
15.63
15.73
15.63
15.73
15.73
60
50
50
60
50
60
60
3.58
4.43
4.25 or 4.41
3.58
3.58
4.43
4.43
Downloaded From projector-manual.com BenQ Manuals
Specifications
29
Dimensions
220mm
175mm
52mm
30
Dimensions
Downloaded From projector-manual.com BenQ Manuals
Warranty
Limited Warranty
BENQ warrants this product against any defects in material and workmanship, under normal usage and storage.
Exclusion to Warranty: The lamps are considered as consumable items and are warranted
for 90 days or 500 hours, whichever occurs first. Proof of purchase date will be required with
any warranty claim. In the event this product is found to be defective within the warranty
period, BENQ’s only obligation and your exclusive remedy shall be replacement of any
defective parts (labor included). To obtain warranty service, immediately notify the dealer
from which you purchased the product of any defects.
Important: The above warranty shall be void if the customer fails to operate the product in
accordance with BENQ’s written instructions. This warranty gives you specific legal rights,
and you may have other rights which vary from country to country.
For more detailed information, please refer to BenQ Warranty Information Book.
Downloaded From projector-manual.com BenQ Manuals
Warranty
31
Safety Regulations
FCC Statement
CLASS A: This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instruction manual, may cause interference to
radio communications. It has been tested and found to comply with the limits for a Class “A”
computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed to
provide reasonable protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference,
in which case the user at his/her own expense will be required to take whatever measures
may be required to correct the interference.
CLASS B: This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the distance between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
EEC Statement
This machine was tested against the 89/336/EEC (European Economic Community) for
EMC (Electro Magnetic Compatibility) and fulfills these requirements.
MIC Statement
A class equipment (Business purpose info/telecommunications equipment)
As this equipment has undergone EMC registration for business purpose, the seller and/or
the buyer is asked to beware of this point and in case a wrongful sale or purchase has been
made, it is asked that a change to household use be made.
B class equipment (Household purpose info/telecommunications equipment)
As this equipment has undergone EMC registration for household purpose, this product can
be used in any area including residential area.
32
Safety Regulations
Downloaded From projector-manual.com BenQ Manuals