Macrom M-DVD9900 Owner`s manual

Owner’s Manual M-DVD9900 cover page MACROM
M-DVD9900
1din mobile DVD Player
OWNER’S MANUAL
FEATURES
POWER
Operating voltage : 12V +20%
DC
-10%
Low power consumption design.
COMPATIBILITY
This DVD player can play the following discs:
DVD, CD, VCD, DVCD, MP3, CD-R,CD-RW.
SYSTEM FUNCTIONS
VIDEO OUTPUT SYSTEM
System MULTI , NTSC or PAL switchable.
1 L/R Audio Output
1 L/R Audio Input
1 AUX Video Input
1 Rear Camera Video Input
3 Video Outputs with one dedicated self switching rear view monitor output
ADDITIONAL VIDEO FEATURES
Multi-angle, multi-view, multi-audio function
Multi-level forward and backward motion
Play position memory, Resume stop and repeat function
TABLE OF CONTENTS
Safety precautions
1
Precautions
2-3
Identification of controls
4-5
When using remote control
Connections
Loading and unloading a disc
6
7-8
9
Turning the power on and off
Switching between DVD and AUX Video Input
Adjusting the volume
10
Playing a disc
Playing/pausing
Tuning the sound on and off
11
Stopping playback
Fast-forwarding/ fast-reversing
Finding the beginning of chapters or tracks
12
Playing from the desired location
13
Chapter/track/title repeat playback
Switching the audio language
14
Switching the angle
Switching the subtitles
15
Displaying the disc status
16
Adjusting the sound setting
17
Changing the default settings(setup)
18-22
MP3 instruction
23
Others
24
Note
Specifications
25
Accessories and Hardware
26
SAFETY PRECAUTIONS
+20%
This digital versatile disc (DVD) video player uses 12V -10% DC.
For future reference, record the model and serial number
(located on the case of the DVD player) in the space provided.
CAUTION:
THIS DVD VIDEO PLAYER IS A CLASS I LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS DVD VIDEO PLAYER IS HARMFUL TO THE EYES,
DO NOT ATTEMPT TO DISASSEMBLE THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
WARNING : class I laser product - Avoid Long Term viewing of Direct Laser Radiation.
WARNING OF DEW FORMATION
Dew may form on the pickup lens in the following conditions.
- Immediately after a heater has been turned on.
- In a steamy or very humid room.
When the unit is suddenly moved from a cold environment to a warm one.
If dew forms inside this unit, it may not operate properly.
In this case, turn on the power and wait about 2 or 3 hours for the dew to evaporate.
When the unit is used under low temperatures,
the pick up lens might warm up very fast and dew will form.
In this case, turn on the power and wait a while for the dew to evaporate.
1
Precautions
Warning
This symbol means important instructions.
Failure to heed them can result in serious injury or death.
Do not disassemble or alter this unit. Doing so may result in an accident,
fire or electric shock.
Keep small objects such as battery out of the reach of children.
If swallowed, consult a physician immediately.
Use the correct ampere rating when replacing fuses.
Failure to do so may result in fire or electric shock.
Use only in cars with a 12 VOLT negative ground.(Check with your
dealer if you are not sure.) Failure to do so may result in fire, etc.
Do not operate any function that takes your attention away from
safely driving your vehicle. Any function that requires your prolonged
attention should only be performed after coming to a complete stop.
Always stop the vehicle in a safe location before performing these function.
Failure to do so may result in an accident.
Do not watch video while driving. Watching the video may distract the
driver from looking ahead of the vehicle and cause an accident.
Keep the volume at a level where you can still hear outside noise
while driving. Failure to do so may result in an accident.
Use this product for mobile 12V applications. Use for other than
its designed application may result in fire, electric shock or other injury.
Do not place hands, fingers or foreign objects in insertion slots
or gaps. Doing so may result in personal injury or damage to the product.
Do not block vents or radiator panels. Doing so may cause heat to
build up inside and may result in fire.
Caution
This symbol means important instructions.
Failure to heed them can result in injury or property damage.
Insert with the correct battery polarity. When inserting the battery,
be sure to observe proper polarity(+ and- )as instructed. Rupture of
the battery may cause fire or personal injury.
Halt use immediately if a problem appears. Failure to do so may cause
personal injury or damage to the product. Consult a professional mobile
video installer.
2
Precautions
Temperature
Be sure the temperature inside the vehicle is between +55° C(+131° F)
and -5°C(+23°F) before turning your unit on.
Moisture condensation
You may notice the CD playback sound wavering due to condensation.
If this happens remove the disc from the player and wait an hour for
the moisture to evaporate.
Damaged disc
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
Maintenance
If you have problems, do not attempt to repair the unit yourself. Consult a
professional mobile video installer.
Never attempt the following
Do not grip or pull out the disc while it is being pulled back into the player
by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is off.
Inserting discs
Your player accepts only one disc at a time for playback. Do not attempt
to load more than one disc.
Make sure the label side is facing up when you insert the disc.
Playing a disc while driving on a very bumpy road may result in skips.
Irregular shaped discs
Make sure the discs you use in this unit do not have any irregularities.
The outer and inner edges should be round and smooth. Use of irregularly
shaped discs may cause damage to the mechanism.
Installation location
Make sure the unit will not be installed in a location subjected to:
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
3
Identification of controls
See the page in
for the details.
Front panel
Disc slot/
open, close indicator
PLAYER/AUX/MONITOR
EJECT
SKIP +
indicators
button/indicator
button/indicator
SKIP PLAY/PAUSE
button/indicator
button/indicator
STOP
button/indicator
POWER
button/ indicator
The button
POWER
Power on/off by pressing this button
EJECT
To eject a disc
10
9
Play/Pause
11
To stop playback
12
To locate previous/next chapter or track
12
Resetting the unit
Press the RESET button with a pointed object,
such as a ballpoint pen, as shown.
Unit will turn off momentary after
the RESET button is pressed.
Note: Pressing the RESET button
will erase some stored contents.
RESET button
4
Identification of controls
Remote Control
EJECT
AV SEL
3
To locate next chapter or track
To change the
playback speed
REPEAT
To locate previous chapter or track
In menu mode, the button(s) of these four
are used to select your desired item.
POWER on/off button
EJECT button to eject the disc
AV SEL button
DISPLAY button to display the disc status
To select External/Internal Video
ANGLE button to select the camera angle
3 Number button
Used to input numbers
Button Playing/Pausing
REPEAT button
to play repeatedly
Button to stop playback
TITLE button
to locate a specific title chapter or track
MENU Button
to locate a specific title chapter or track
Joy stick
Goto Button to Locate a location by entering
its corresponding track number, chapter
number or time
SETUP button
to change the default settings
AUDIO Button
to switch the audio language
SUB button to select subtitle
MUTE Button
playing with no sound
VOL +/- button
to control the volume
SEL button
to select the audio functions
5
When using remote control
Preparing the remote control
Insert battery (3V, CR2025) into the remote control.
Make sure the + side of the battery faces up before closing the cover.
1) Open the cover,
pull the cover as illustrated
2)Insert cell (3V),Close the cover
Operating with the remote control
This section shows you how to use the
remote control. Point the remote control
at the remote sensor and press the buttons.
With about 4m
YVD
IO/D
PLA
RAD
DIS
The remote range: about 4m from the front
of the remote sensor.
(Is) off axis: more than 30L in each direction
of the front of the remote sensor.
CK
CLO
ER
POW
Y
DIS PLA
0
CL EA
3
R
2
6
1
5
4
Do not expose the remote sensor of the DVD player and the remote control to a strong light source
such as direct sunlight or other illumination. If you do so, you may not be able to operate the DVD
player via the remote control.
Notes on battery
To operate the remote control correctly, follow the instructions below.
Do not insert cell into the remote control in the wrong direction.
Do not charge, heat, open, or short-circuit the cell. Do not throw cell into a fire.
If the remote control does not function correctly or if the operating range becomes reduced,
replace the cell with new one.
Notes on the remote control
Direct the remote control at the remote sensor of the DVD player.
Do not drop or give the remote control a shock.
Do not leave the remote control near an extremely hot or humid place.
Do not spill water or put anything wet on the remote control.
Do not disassemble the remote control.
6
Connections
Rear of product
REMOTE
Remote control sensor jack.
Connect IR sensor plug directly
to this jack for remote operation.
Nacarat
Yellow
Left (White)
Right (Red)
Yellow
Connect either
AUDIO OUT
AUDIO OUT
AUDIO IN
VIDEO OUT
Sub woofer
Front speaker
Rear speaker
RCA input for video games
Center speaker
RCA input for rear-view camera
Front speaker
Rear speaker
To monitor with rear-view camera input
To headrest or ceiling mount monitors
Black: (-) neg. ground input. To vehicle chassis
Brown: (+) pos. reverse wire input (for rear view camera option)
Blue: (+) 300mA max. remote turn-on wire output
Yellow: (+) pos. 12 volt constant input
Red: (+) pos. 12 volt accessory input
Green: Used to detect the On/Off status of the parking brake.
This lead must be connected to the power supply side of
the parking brake switch.
7
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
Connections
1 NOTE
Connect
Audio out( audio related, see page 19)
SPDIF/RAW
RAW DATA VIA SPDIF
SPDIF/PCM
PCM DATA VIA SPDIF
ANALOG
ANALOG OUTPUT
Coaxial cable
Audio cable
2 NOTE
1 Refer to the owner's manual for " the connected monitor " as well.
2 Refer to the owner's manual of the connected equipment for additional information.
3 When you connect the DVD player to other equipment, be sure to turn off the power .
4 If you place the DVD near a tuner or radio, the radio broadcast sound might be distorted.
In this case, place the DVD player away from any other tuner or radio.
5 The output sound of the DVD player has a wide dynamic range. Be sure to adjust the
receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by
a sudden high output.
6 Turn off the amplifier before you connect or disconnect the DVD player's power leads.
If you leave the amplifier power on, the speakers may be damaged.
3 NOTE
1. We advise to connect the EX-VIDEO-CON lead.
And so the front display only will be on while detecting the parking brake ON.
Or if the EX-MONITOR-CON and MONITOR VIDEO IN are used,
the front display will be on while backing the car.
2. This product’s REAR VIDEO OUT and VIDEO OUT are for connections of displays
to enable passengers in the rear seats to watch the DVD or Video CD.
Warning
NEVER install the display in a location that enables the Driver to watch the DVD
or Video CD while driving.
This product detects whether your car’s parking brake is engaged or not,
and prevents you from watching a DVD or Video CD on the display connected to
Front Video Out while driving.
Example: When you attempt to watch a DVD, the screen is black. When you park your
car in a safe place and apply the parking brake, the picture appears on the screen.
8
Loading and unloading a disc
Loading and unloading a disc
Turn on the power before loading and unloading discs.
1
2
Insert the disc with the side
containing words diagrams
facing upwards.
Unloading disc
Press EJECT
ejected.
button, the disc is automatically
Once the disc is partially inserted, it is
drawn in automatically. Playback starts.
EJECT
EJECT
Notes:
If wrong disc, upside-down discs or dirty discs
have been inserted, “NO DISC ” is displayed.
Remove the disc.
Do not put any objects other than discs into the
disc slot, doing so may cause the player to
malfunction.
Tips
DVD
DVD
VCD
VCD
CD
MP3
These indicate the discs for which the function can be used.
MP3
:You can use this function with DVD discs.
CD
:You can use this function with VIDEO CDs.
:You can use this function with MP3 discs .
:You can use this function with CDs .
About this owner's manual
This owner's manual explains the basic instructions of this DVD player. Some DVD
discs are produced in a manner that allows specific or limited operation during playback.
As such, the DVD player may not respond to all operating commands. This is not a
defect in the DVD player. Refer to the instruction notes of discs.
"
"may appear on the screen during operation.
A"
" means that the operation is not permitted by the DVD player or the disc.
9
Turning the power on and off
Switching between External and Internal Video
Adjusting the volume
1 Turning the power on and off
AV SEL
Press
POWER button
The power turns on.
To turn the power off, Press
button again.
POWER
Play Position Memory Function
Even if you turn power off or switch the ignition
Key to OFF during playback or change the video
source, playback will continue from the point
where playback stopped when the power is
turned ON again.
The play position memory is released if the disc
is removed or the Reset switch is pressed.
2
Switching between DVD
and AUX Video Input
AV SEL
To switch between DVD and
AUX Video input, press the AV SEL on the remote control.
AV SEL
Connect
Using AUDIO and
VIDEO OUT,
connect the monitor
or audio system
INTERNAL VIDEO
Using AUDIO and VIDEO IN,
connect the DVD video player
to a VTR, TV/VTR combination
or video selector
3 Adjusting the volume
Press the + button to increase the volume.
Press the - button to decrease the volume.
10
AUX Video Input
Playing a disc
Playing/pausing
Tuning the sound on and off
1 Playing a disc
VCD
CD
MP3
Caution
~
Press
DVD
With some DVDs, certain operations are disabled.
Such operations are not possible on such DVDs.
The DVD functions described in this manual are
not supported by all instructions for details on the
features supported.
Fingerprints on a disc may adversely affect
playback. If a problem occurs, remove the disc
and check for fingerprints on the playback side.
Clean the disc if necessary.
When using the remote control, be careful to
pressing multiple buttons at the same time may
cause erroneous operation.
VCD menu
Use the number keys(0~9) to select the
desired item, then press ENTER or
button.
Playback starts.
DVD
VCD
MP3
If a menu screen appears
On DVDs and video CDs with playback control
(PBC), menu screen may appear automatically.
If this happens, perform the operation described
below to start playback.
Note: For many discs, the menu screen can
also be displayed by pressing MENU or TITLE.
Or
DVD menu
Use the Joystick or the number keys(0~9) to
select the desired item, then press ENTER or
Note: The menu screen does not appear when
the PBC function is turned off. If this is the
case press MENU to turn on the PBC function.
In PBC off mode, you can use the number keys
to input the desired track also.
Or
Or
Playing/pausing
During playback press
to pause playback.
Press
again to resume playback.
Note: For some discs it is not possible to select
items for the menu to menu screen using the
number buttons (0~9).
Tips
DVD
VCD
CD
Tuning the sound
on and off
MP3
Using the Number keys
This describes use of the Number keys.
To input 16: Press the 1 button and then press the 6 key.
To input 28: Press the 2 key and then press the 8 key.
To input 108: Press the 1 key and then press the 0 and 8
button.
After the number input, press ENTER or PLAY button to start
the playback.
11
During playback press MUTE , no sound
is played. Press Mute to resume normal
playback with sound.
Stopping playback
Fast-forwarding/ fast-reversing
Finding the beginning of chapters or tracks
2 Fast-forwarding/
DVD
VCD
CD
MP3
fast-reversing
During playback press
7(fast-reverse) or8 (fast-forward)
Each time you press the7 or8 button,
the playback speed changes to X1, X2,
X3 , X4 the normal speed
or normal speed.
Press to return to
normal playback.
DVD
VCD
CD
MP3
1 Stopping playback
Press the stop button during playback to stop
playback.
Press
during playback.
3 Finding the
Tips
When the PRE-STOP function is used, the
position at which playback is stopped is
stored in the memory, and playback resumes
from that position.
VCD
CD
MP3
During playback press9 or:
once during playback.
PRESS PLAY TO CONTINUE is displayed.
Press
DVD
beginning of chapters or tracks
Using the PRE-STOP function(DVD only. )
Press
Notes:
No sound or subtitles are played during
fast-forwarding/fast-reversing of DVDs
or Video CDs.
However, sound is played during fastforwarding/fast-reversing of audio CDs.
The chapter/track switches each time
the button is pressed,
and playback of the
selected chapter/track
Or
starts.
in the PRE-STOP mode.
Playback starts from the position at which
it was stopped.
To cancel the PRE-STOP function
Either press again in the PRE-STOP mode,
eject the disc or turn the power to clear
the memory. Playback will start at the
beginning of the disc.
::Press this to start playback from the
beginning of the next chapter or
track.
9:Press this to start playback from the
beginning of the previous chapter or
track.
Note: Some DVDs do not have chapters.
Notes:
For some discs, the position at which playback
was stopped may not be accurate.
For Video CD:
Press
during playback,
1 in PBC off mode, playback stops.
Press PLAY, playback will start at the
beginning of the disc.
2 in PBC on mode, playback stops and press
PLAY then it will be back to main page.
12
Supplementary explanation
Chapters are divisions of movies or
musical selections on DVDs.
Tracks are divisions of movies or musical
selections on video and audio CDs.
Playing from the desired location
Input the chapter,
the title or the time
from which you want
to start playback using
the joystick and the number
keys(0~9).
~
TITLE 02/02 CHAPTER 012/057
TOTAL TITLE NUMBER
CURRENT TITLE
TOTAL CHAPTER NUMBER
CURRENT CHAPTER
(When title 2 is input )
DVD
VCD
CD
TITLE 02/02 CHAPTER 012/057
1 Playing from
(When chapter 12 is input )
the desired location
Locating a specific location by entering
the track number, the chapter number
or the time.
TITLE 01/02 TIME 01:30:00
(When 1 hour, 30 minutes is input as
the elapsed time)
During playback, press GOTO.
GOTO
30:00
(When 30 minutes is input as
the elapsed time)
DVD
TITLE 01/02 CHAPTER 012/057
Press GOTO again
Notes:
Input the hours first, followed by the
minutes, then the seconds.
Press GOTO to cancel the search mode
and resume normal playback.
Some discs may not respond to
this process.
Some scenes may not be located
precisely as you specified.
This method for accessing specific
locations is available only within the
current title of the DVD video disc or
within the current track of the
VIDEO CD/audio CD.
TITLE 01/02 TIME_ _:_ _:_ _
VCD
CD
VCD(PBC OFF)
GOTO
_ _:_ _
Press ENTER
Playback starts from the selected
chapter, track or the time.
13
Chapter/track/title repeat playback
Switching the audio language
2Switching the
DVD
VCD
audio language
REPEAT
On DVDs including multiple audio modes or
multiple audio languages, the audio language
can be switched during playback.
REPEAT
During playback, press AUDIO.
The sound switches between the different
audio modes recorded on the disc each time
the button is pressed.
1 Chapter/track/title
Notes:
The language selected with the default setting
is set when the power is turned on or the disc
is replaced. If the disc does not include that
language, the disc’s default language is set.
For some discs it is not possible to switch the
audio language during playback.
Some time may be required for the audio
language to change.
REPEAT
repeat playback
During playback ,
Press REPEAT
The repeat mode switches each time
the button is pressed.
Video CDs with multiplex audio
DVD
CHAPTER REPEAT ON
During playback, press AUDIO.
The combination of the left and right channels
changes each time the button is pressed.
TITLE REPEAT ON
REPEAT OFF
LEFT VOCAL
RIGHT VOCAL
STEREO
VCD
CD
VCD(PBC OFF)
REP - ONE
REP-ALL
REPEAT OFF
14
MONO LEFT
MONO RIGHT
Switching the angle
Switching the subtitles
2 Switching the subtitles
DVD
With DVDs on which multiple subtitle
languages are recorded, the subtitle
language can be switched during playback.
During playback, press SUB.
The subtitle language switches
between the languages recorded
and you also can select whether to
display the subtitles on the disc each
time the button is pressed.
1 Switching the angle
DVD
Note:
Some time may be required for the subtitle
to change.
The language selected with the default
setting is replaced. If the disc does not
include that language, the disc’s default
language is set.
For some discs, the subtitles will be
displayed even when this is set to off.
With DVDs on which images photographed
from multiple angles are recorded, the angle
can be switched during playback.
During playback, press ANGLE.
The angle switches between
the angles recorded on the disc
each time the button is pressed.
Tips
Note:
Some time may be required for the angle
to change.
Switching from the menu
For some discs, the audio language, angle and
subtitle can be switched from the disc menu.
Press MENU or TITLE, select the item,
then press ENTER.
Or
15
Displaying the disc status
2 Displaying the disc
VCD
CD
status
Use the procedure described below to display
the status(track number, etc.)of the currently
playing Video CD or Audio CD on the screen.
During playback,
press DISPLAY.
The playback status switches each
time the button is pressed.
1 Displaying the disc status
TOTAL ELAPSED
xx:xx:xx
PLAY:11
TOTAL:22
TOTAL REMAIN
xx:xx:xx PLAY:11
TOTAL:22
DVD
Use the procedure described below to display
the status(title number, chapter number, etc.)
of the currently playing DVD on the screen.
During playback,
press DISPLAY.
SINGLE ELAPSED
The playback status switches each
time the button is pressed.
SINGLE REMAIN
TITLE 01/01 CHAPTER 001/057
xx:xx:xx
OFF
TITLE REMAIN
xx:xx:xx
CHAPTER ELAPSED
xx:xx:xx
CHAPTER REMAIN
xx:xx:xx
the display turns off.
16
Adjusting the sound setting
1 Adjusting
DVD
VCD
CD
MP3
the sound setting
The sound settings can be
changed to suit your personal
preferences and usage.
To select the audio functions as you like:
To
Press SEL button on the remote repeatedly
until the item you want to adjust appears on the screen
Press the VOL +,- button
adjust the setting
as you like
Balance
BALANCE : L00
The level changes from
L08~L00 and L00~R08
Bass
BASS
: -00
The level changes from -07~+07
Treble
TREBLE
: -00
The level changes from -07~+07
Loudness
LOUDNESS ON
Volume
VOLUME
18
17
ON or OFF
The level changes from 00~36
Changing the default settings(setup)
1 Changing
EJECT
DVD
VCD
CD
MP3
the default settings(setup)
Press SETUP during stop.
The setting menu appears.
Press joystick button to move the cursor to
the item, then press ENTER to select the item
you want.
SETUP MENU
MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO
SETUP
PREFERENCES
EXIT
SETUP
GENERAL SETUP
NORMAL/PS
NORMAL/LB
WIDE
TV DISPLAY
PIC MODE
ON
OFF
ANGLE MARK
EXT AMP
OSD LANG
ON
OFF
NORMAL/PS NORMAL TV PAN SCAN
SET TV DISPLAY MODE
NORMAL/LB
WIDE
PIC MODE
AUTO
SET PICTURE MODE
HI-RES
N-FLICKER
ANGLE MARK ANGLE ON/OFF
EXT AMP
ON
OFF
ENGLISH
SCR SAVER
TV DISPLAY
AUTO
HI-RES
N-FLICKER
TURN EXT AMP ON/OFF
OSD LANG
SET OSD LANGUAGE
SCR SAVER
SCREEN SAVER
18
NORMAL TV LETTER BOX
WIDE SCREEN TV
AUTO MODE
HIGH-RESOLUTION MODE
NONFLICKER MODE
Changing the default settings(setup)
EJECT
SETUP MENU
MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO
SETUP
PREFERENCES
EXIT
SETUP
SPEAKER SETUP
LT/RT
STEREO
DOWNMIX
DOWNMIX
LOUD SPEAKERS SETUP
LT/RT
SET LT/RT DOWNMIX
STEREO
SET STEREO DOWNMIX
AUDIO SETUP
ANALOG
SPDIF/RAW
SPDIF/PCM
AUDIO OUT
OP MODE
STEREO
L-MONO
R-MONO
MIX-MONO
DUAL MONO
DYNAMIC
PRO LOGIC
LPCM OUTPUT
AUDIO OUT
LPCM 48K
LPCM 96K
AUDIO RELATED
19
LINE OUT
RF REMOD
FULL
6/8
4/8
2/8
OFF
OFF
ON
AUTO
ANALOG
ANALOG OUTPUT
SPDIF/RAW
RAW DATA VIA SPDIF
SPDIF/PCM
PCM DATA VIA SPDIF
Changing the default settings(setup)
EJECT
SETUP MENU
MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO
SETUP
PREFERENCES
EXIT
OP MODE
OPERATIONAL MODE SETUP
DUAL MONO DUAL MONO(1+1) SETUP
DYNAMIC
PRO LOGIC
SETUP
LINE OUT
LINE OUT MODE
RF REMOD
TV WITH NO AV INPUT
STEREO
SET STEREO MODE
L-MONO
SET LEFT MONO MODE
R-MONO
SET RIGHT MONO MODE
MIX-MONO
SET MIXED MONO MODE
FULL
-6/8
-4/8
-2/8
-OFF
DYNAMIC RANGE
COMPRESSION
SET PRO LOGIC ON/OFF
SET LPCM TO 48K OR 96K
20
DYNAMIC RNG COMPRESSION 7/8
DYNAMIC RNG COMPRESSION
DYNAMIC RNG COMPRESSION 5/8
DYNAMIC RNG COMPRESSION 2
DYNAMIC RNG COMPRESSION 3/8
DYNAMIC RNG COMPRESSION
DYNAMIC RNG COMPRESSION 1/8
DYNAMIC RNG COMPRESSION OFF
OFF
PRO LOGIC OFF
ON
PRO LOGIC ON
AUTO
LPCM OUTPUT
FULL DYNAMIC RNG COMPRESSION
PRO LOGIC AUTO
LPCM 48K
LPCM OUTPUT 48K
LPCM 96K
LPCM OUTPUT 96K
Changing the default settings(setup)
EJECT
SETUP MENU
MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO
SETUP
PREFERENCES
EXIT
SETUP
CHINA
FRANCE
HONG KONG
JAPAN
TAIWAN
GBR
USA
PREFERENCES
MULTI
NTSC
PAL
TV TYPE
LOCALE
1G
2
3 PG
4 PG 13
5
6 PG-R
7 NC-17
8 ADULT
NO-PARENTAL
PARENTAL
PASSWORD
CHANGE
RESET
DEFAULTS
SMART NAV
WITH MENU
LOGO
OLD PASSWORD:
NEW PASSWORD:
CONFIRM PWD:
MPG LOGO
JPG LOGO
TV TYPE
LOCALE
SET TV STANDARD
PREFERRED LOCALITY CODE
21
MULTI
MULTISYNC TV
NTSC
NTSC TV
PAL
PAL TV
GRB
UNITED KINGDOM
Changing the default settings(setup)
EJECT
SETUP MENU
MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO
SETUP
PREFERENCES
EXIT
PARENTAL
SETUP
1G
2
3 PG
4 PG 13
5
6 PG-R
7 NC-17
8 ADULT
NO-PARENTAL
SET PARENTAL CONTROL
PASSWORD
CHANGE
NOTE: Factory default password is 3308.
DEFAULTS
RESET
SET TO G, LEVEL 2, PG,
PG13, LEVEL 5, PG-R,
NC-17,ADULT,
OR NO-PARENTAL
OLD PASSWORD:
NEW PASSWORD:
CONFIRM PWD:
LOAD FACTORY SETTINGS
SMART NAV SMART NAV TYPE
WITH MENU PLAYING MP3 WITH MENU
LOGO
MPG LOGO
OPEN SCREEN LOGO
JPG LOGO
22
MP3 instruction
EJECT
1 MP3 instruction
MP3
Insert the MP3 disc then playback starts,
the MENU of elapsed track appears.
SMART
MP3
MP3
MP3
Mp3
MP3
ROOT
PLAY MODE
NAV 1
J&Z
xxx
xxx
xxx
xxx
1
2
3
4
5
REP-ONE
PRESS
9:
34
Number button
To play the preceding or the next track
In play mode, it starts to fast-forward or fast-revers
To select the track with the number button
Note: For some discs it is not possible to select
items for the menu to menu screen using the
number buttons (0~9).
34
PLAY MODE
DISPLAY
In stop mode, move cursor to PLAY MODE with joy stick
,
pressing joy stick
to change PLAY MODE: SINGLE, REP-ONE,
FOLDER, FOLDER REP, DISC SCAN, DISC, DISC REP, RANDOM,
SHUFFLE ON , PROGRAM P0. Select the desired play mode, then
move the cursor back to the track menu and you desired track
with
, finally press PLAY to start playback again.
STATUS DISPLAYED: CHAPTER ELAPSED XX:XX:XX
CHAPTER REMAIN
Playing MP3 disc, the play position memory is not available.
23
XX:XX:XX
Others
In case of difficulty
If operation freezes, the screen goes black or the unit should otherwise not function properly,
try turning the power off then back on. Alternatively, try the following methods in the order
listed until the unit returns to normal playback mode.
1) Turn the car’s ignition OFF and back ON again.
2) Press the RESET button on the face of the unit
This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the
rest of your system is properly connected or consult a professional mobile video installer.
Symptom
Unit does not
operate.
Cause
Remedy
Fuse is blown.
Monitor’s power is not turn on.
Condensation
Replace with a fuse of the specified capacity.
Turn on the monitor’s power
Wait a while(about 1 hour) for the condensation
to dry.
Operation is
unstable.
Remote control unit’s
battery is worn.
Remote control sensor or
transmitter is dirty.
Replace the remote control unit’s battery with
new one.
Clean the sensor or transmitter.
No picture is
produced.
Monitor’s mode is not
switched to the mode you
want to see.
Switch to the mode you want to see.
Playback does
not start.
Disc is loaded upside-down.
Check the disc and load it with the labeled side
facing upward.
Clean the disc.
Check if the disc is able to be played back.
Disc is dirty.
A disc not able to playback
with this unit is loaded.
Parental lock is set.
Picture is
unclear or noisy
Image stops
sometimes.
No disc
Not valid
Cancel the parental lock or change the rating
level.
Disc is being fast-forwarded
or fast-reversed.
The picture may be slightly disturbed, but this
is normal.
Vehicle’s battery power is
weak.
Check the battery power and wiring.
The unit may malfunction if the battery power is
under 10.8 volts with a load applied.
Monitor’s fluorescent tube is
worn.
Replace the monitor’s fluorescent tube.
Disc is scratched.
Replaced with a non-scratched disc.
No disc is loaded.
Disc is dirty.
Load a disc.
Clean the disc.
For some discs or playing modes, certain
operations are not possible. This not a
malfunction.
Remote control operation
is not possible.
VIDEO SIGNAL
PAL( or NTSC) disc is loaded.
SYSTEM IS NOT
CORRECT
No sound
Select the wrong Audio Out
24
Change the TV TYPE of the unit(see SET UP).
According to the connection, set ANALOG for
using audio cable, set SPDIF/RAM/PCM for
using coaxial cable. See page 7,8 and 19.
Note
Specifications
Note
Remove this CD
stopper before use.
Apply the paper
cover (supplied) on
the screw hole to
keep out dust.
Remove this CD
stopper before use.
Apply the paper
cover (supplied) on
the screw hole to
keep out dust.
Two black sticking papers
There are 2 mounting screws on the case of the DVD player( as above figure
shows) to protect the unit during shipping.
You need to remove the sticking papers and screws after unpacking this product.
Apply the black sticking papers(supplied)on the screw holes to keep out dust.
Specifications
Audio
Audio output(analog):
Audio output(coaxial):
Signal-to-noise ratio:
Dynamic range:
Distortion:
Video
Video output:
Resolution:
Power
Power requirement:
Power consumption:
General Dimensions(approx.):
Weight:
2
V 100k
0.5V 75
more than 90dB
more than 85dB
less than 0.08%
1
V
more than 500
line
+20%
12 -10% V DC , 1.5A
less than 20W
178x50x183mm
(w/h/d) incl. Projecting parts
1.4Kg
¡
¡
Normal operating temperature range: 23 F to131 F
Design and specifications are subject to change without notice.
The illustrations in this manual may appear different from the
actual product due to printing conditions.
25
Accessories and Hardware
Mounting Bracket
(Half Sleeve) X 1
Mounting Screw M5
X1
Mounting Grommet
X1
CL
PO
CL
EA
W
OC
ER
Rear Strap
(Brace) X 1
Hex bolt M5 x 14
X2
Side bracket X 2
Flat head screw M5 x 4
X2
Removable Trim Ring
equipped on the unit
X1
K
R
1
0
4
DI
RA
SP
DIO
LA
/D
YVD
2
DI
7
PL
TI TL
5
ST
AY
MO
SP
LA
Y
3
8
DE
AN
E
BA
9
6
GL
E
ND
SE
SE
SC
SU
TU
EK
-
EN
P
TE
SE
GO
SE
M EN
R
U
AN
B
V O+
L
L
M
AU
_
M UT
DI
EK
+
TO
EM
O
E
Remote control x 1
Lithium Button Cell (3V) x 1
26
IR sensor x1
Owner’s Manual M-DVD9900 Back cover page MACROM
MACROM SA. LUXEMBOURG, MENDRISO BRANCH
3 MOREE ST., CH 6850 MENDRISIO
SWITZERLAND