D1917ES
PORTABLE 9" LCD MONITOR, DVD PLAYER AND
EXTRA MONITOR
An LCD panel and/or video monitor may be installed in a motor
vehicle and visible to the driver if the LCD panel or video monitor
is used for vehicle information, system control, rear or side
observation or navigation. If the LCD panel or video monitor is
used for television reception, video or DVD play, the LCD panel or
video monitor must be installed so that these features will only
function when the vehicle is in “park” or when the vehicle’s parking brake is applied.
An LCD panel or video monitor used for television reception, video
or DVD play that operates when the vehicle is in gear or when the
parking brake is not applied must be installed to the rear of the
driver’s seat where it will not be visible, directly or indirectly, to the
operator of the motor vehicle.
Notice:
This Product incorporates copyright protection technology that is
protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
2
Content
A. Introduction ............................................................................ 4
B. Cautions and Warnings ........................................................ 4
C. Contents ............................................................................... 6
D. Powering and Installation ..................................................... 6
E. Vehicle Installation ..................................................... 8
F. Controls, Indicators and Connectors ................................... 10
G. Loading and Playing a Disc ................................................. 12
H. Basic Operation......................................................................13
I. Menu .................................................................... 14
J. Display................................................................................... 14
K. Playing Audio CDS................................................................ 17
L. Playing MP3 Discs .......................................................... 18
M. Connecting to Other Electronic Equipment.........................20
N. Playing JPEG Files........................................................... . 21
O.Connecting the Monitor to a Game or Camcorder.............. 22
P. Setup .................................................................................... 23
Q. Specifications ...................................................................... 26
R. Rechargeable Battery Installation and Use ......................... 26
S. Troubleshooting ................................................................. 29
3
A. Introduction
Thank you for choosing the D1917ES portable DVD player and extra
monitor. The main features include two 9" Digital Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitors and a DVD player.
The unit also contains a 3 in 1 card reader and a USB port. The unit is
designed for use with SD/MMC, MS memory cards and USB memory
devices. The unit applies the latest state of the art electronics and is
designed for use in hotels, offices or your home. The unit is constructed to provide years of reliable, trouble-free service and is compact so that you can take it with you anywhere and is designed for
quick and easy installation. Please read the entire instruction manual
supplied with this product prior to using. The documentation will assist you in using the system properly to obtain the best equipment
performance. Please save this manual for later use.
B. Cautions and Warnings
1. Placement
To prevent fire or electric shock, do not expose this unit to rain or
moisture. Keep the unit away from strong magnets, heat sources,
direct sunlight, excessive dust. If the unit is brought directly from a
cold to a warm location, moisture may condense inside the unit.
When you move the unit from a cold to a warm location, wait for
about one hour before operating the unit, or remove the disc and
leave the unit turned on until the moisture evaporates.
2. Installation
Ensure that the 9” portable DVD player and extra monitor are used
in accordance with the instructions and illustrations provided in this
manual.
3. Caution
Do not push objects of any kind into the unit through openings; do
not spill or spray liquid of any kind on or in the unit (this may
4
result in a fire or electric shock). Do not place anything heavy on
the unit. To ensure proper ventilation and proper operation, never
cover or block the slots and openings with a cloth or other material.
Keep the unit away from an open flame such as fire, candle etc.
Replacing the battery incorrectly is hazardous. Replace the battery only with the same or equivalent type. In order to protect the
environment, please dispose the battery properly. Do not use the
unit in temperatures higher than 95 degrees Fahrenheit or 35 degrees Celsius.
4.Disassembly
Do not attempt to disassemble the unit’s case. There is a risk of
electric shock and/or exposure to Laser Radiation. Contact qualified service personnel if your system needs repair.
5. Cleaning Unit
When cleaning, make sure the system is unplugged from the power
source. Do not use liquid cleaners or aerosol cleaners. Use a cloth
lightly dampened with water for cleaning the exterior of the system
only.
6. Disc
Do not use irregularly shaped discs such as heart or star-shaped
discs as they may cause the unit to malfunction. Do not stick paper,
tape or glue on the disc. Do not expose the disc to direct sunlight
or heat sources. Do not touch the surface of disc. Handle the disc
by its edge. Clean the disc by wiping the disc from the center out
with a clean cloth. Remove the disc from the unit and store it in its
case after playing. Some playback operations of discs may be intentionally fixed by software producers. Since this unit plays discs
according to the disc contents the software producers designed,
some playback features may not be available. Also refer to the
instructions supplied with the discs.
5
7.Regional Coding
Both the DVD player and disc are coded by region. These
regional codes must match in order for the disc to play. If the
codes don’t match, the disc won’t play. This unit’s code is region
1. DVD’s with other regional codes cannot be played in this unit
C. Contents
1. 1 x 9’’ LCD Monitor and DVD Player
2. 1 x 9’’ LCD Monitor
3. 1 x Remote Control with battery (CR2025)
4. 1 x Audio/Video Adapter Cable (One to Three Female)
5. 1 x Audio/Video Adapter Cable (One to Three Male)
6. 1 x AC to DC Adapter
7. 1 x Y Type DC Power Adapter
8. 1 x Instruction Manual
9. 1 x Rechargeable Battery
10. 1 x Mounting Bag With Straps for the Monitor
11. 1 x Carry Bag With Straps
D. Powering and Installation
1. Powering the system indoors (Refer to Figure 1)
Plug one end of the AC to DC adapter into the DC input jack on the
left side of the main unit, then plug the other end into the 110~240V
AC power receptacle.
Single Monitor
Main Unit
Figure 1
6
Note: Unplug the the unit from its power source and remove the
rechargeable battery if the unit is not going to be used for a long
time.
2. Powering the system in a car (Refer to Figure 2)
Plug one end of the DC Power adapter into the DC input jack on
the unit, then plug the other end into the vehicle power outlet.
Monitor
Main Unit
Main Unit
Right Side
Monitor
Figure 2
7
E. Vehicle Installation
Installing the DVD Player and monitor onto a car seat
(Refer to Figures 3 through 5)
Carry Bag Opened
Carry Bag Closed
Elastic
Straps
Vehicle Headrest
Headrest
Strap
Seat Back
Strap
Vehicle Seat
Back
Figure 3
1). Unfold the carry bag and place the DVD player on the bag
beneath the elastic straps. Ensure that the unit’s corners are
secured by the elastic straps.
2). Secure the upper portion of the carry bag to headrest support
bars using the headrest strap. Adjust the headrest strap until the
bag is firmly secured.
3). Secure the lower portion of the carry bag to the vehicle seat back
using the seat back strap. Adjust the seat back strap until the
bag is firmly secured.
8
Installing the monitor
Option 1 Vehicle Headrest (Refer to Figure 4)
Figure 4
Slide the Monitor into the pouch and attach the Velcro straps to secure the Monitor in the pouch. Loop the strap of the pouch around the
headrest and pull the end of the strap while holding the buckle to
secure the pouch to the headrest
Option 2 Flat Surface (Refer to Figure 5)
Figure 5
Rotate the base of Monitor backward and place on a flat surface.
Adjust the screen for a proper viewing angle. This can be done with
the Monitor inside or outside the pouch.
9
F. Controls, Indicators and Connectors
1. LCD Monitor and DVD Player (Refer to Figure 6)
1
11
2
4
12
13
14
15
5
6
7
8 9
10
16
17
18
19
20
Figure 6
1) Battery Release Button
2) DC 9V Input Jack
3) AV Jack
4) AV In/Out Switch
5) USB Port
6) Power ON/OFF Switch
7) SD/MMC/MS Card Slot
8) Power LED
9) Remote Control Sensor
10) Cover Open Switch
11) Charge Indicator
12) Headphone Jack 1*
13) Headphone Jack 2
14) Volume Up/Down Control
15) Brightness Up/Down Control
16) LCD Panel Shut Off Switch
17) Wide Button
18) Previous/Next/Pause/Stop/Play
19) Menu Button
20) Up/Down/Left/Right/OK Button
* Connecting to headphone jack number 1 will disable the
internal speakers
10
2. Monitor View (Refer to Figure 7)
VOLU ME
1
2
OFF POWER ON
AV IN
3 4
DC IN 9V
5
REVER SE
6
7
Figure 7
1) Volume Up/Down Control
2) Power ON/OFF Switch
3) AV IN Jack
4) DC 9V Jack
5) Headphone Jack (Disables the internal speakers)
6) Reverse Switch
7) Brightness Up/Down Control
NOTE: Slide the Reverse Switch to rotate the picture 180 degrees.
image.
NOTE:To view the monitor rotate the base backward and place it
on a flat surface. Adjust the screen for a proper viewing angle. This
can be done with the monitor inside or outside the pouch.
11
3. Remote Control (Refer to Figure 8)
1) Setup Button
2) Up Button
3) Skip - Button
4) Enter Button
5) Reverse/Left Keypad
6) Down Button
7) Numeric Buttons
8) Display Button
9) Zoom Button
10) DVD/SD-USB Button
11) Skip + Button
12) A-B Repeat Button
13) Forward/Right Keypad
14) 1/All Repeat Button
15) Stop Button
16) Menu Button
17) Subtitle Button
18) Audio Button
19) Play/Pause Button
Figure 8
G. Loading and Playing a Disc
a. After connecting power to the unit, power on the DVD player with
the power switch. The power indicator will light.
b. Open the disc tray by sliding the OPEN switch in the direction of
the arrow. Place a disc in the tray with label side facing up.
c. Close the tray by pressing the area marked “PRESS” . The unit will
load the disc and start playing.
d. Rotate VOLUME to adjust the LCD’s brightness and the DVD
player’s volume.
e. To stop playing a disc, press STOP.
12
H. Basic Operation
POWER
OPEN
PAUSE
STOP
PLAY
Skip + NEXT
Skip - PREVIOUS
FORWARD
REVERSE
ANGLE
LEFT/RIGHT/UP/
DOWN
ENTER
NUMBERS
MENU
REPEAT
A-B
DISPLAY
SUBTITLE
AUDIO
SETUP
WIDE
Turn the unit on/off
Remove/load the disc
Press to pause play and again to re-start play.
Press once to stop and restart at the stop point
Press twice to stop and restart at the
beginning of the disk
Start Play/Execute item or setting
Go to the next chapter, track or scene
during play back
Go back to the previous chapter, track
or scene during play back
Scan forward at 2, 4, 8,16 or
32 times speed
Scan backward at 2, 4, 8, 16 or
32 times speed
Change the viewing angle of the scene
Used for Menu Navigation
Execute item or confirm setting
Select item or setting
Display the main menu of the disc
Repeat playing title, chapter, or track
Repeat a specific portion from
point A to point B of the disc
Display information (title, chapter, track,
time, etc.).
Select the subtitle language and turn it
on/off
Select the audio language
Display the setup menu to select and
set items, and exit the setup menu.
On the player only: change between wide
screen and 4:3 picture aspect ratio.
13
I. Menu
A DVD is divided into sections called titles and chapters. When you
play a DVD, the root menu of the disc will appear on the screen of
your TV or Monitor. The contents of the menu vary from disc to disc.
Press MENU during playback to display the menu. Some DVDs only
allow you to select disc playback options using the DVD root menu.
J. Display
1. PLAYING TIME AND REMAINING TIME
a. During playback press the ‘DISPLAY’ button to display the current Title Number (1), the total Number of Titles (2), the current
Chapter Number (3), the total Number of Chapters (4), and the
elapsed playing time for the title (5).
Title, Chapter Number, and Time Screen Display
b. Pressing ‘DISPLAY’ repeatedly will provide the following sequential options below:
Title Elapsed: The elapsed time of the title
Title Remain: The remaining time of the title
Chapter Elapsed: The elapsed time of the chapter
Chapter Remain: The remaining time of the chapter
Display Off: The DVD’s time information is removed from view.
Title Elapsed
Title Remain
Chapter Elapsed
Chapter Remain
Display Off
14
2. SUBTITLE
During disc playback press ‘SUBTITLE’ to select the subtitle language
you desire*, with the current Subtitle Language Number (1) and the
total Number of Subtitle Languages (2) displayed. If there are multiple languages press ‘SUBTITLE’ again to select another subtitle language. To turn subtitles OFF, press the ‘SUBTITLE’ button until ‘Subtitle Off’ is displayed. The Subtitle display will disappear automatically
if the ‘SUBTITLE’ button is not pressed again within 3 seconds.
* Some DVDs only allow access to this function through the DVD menu.
Subtitle
3. AUDIO
During playback press ‘AUDIO’ to select the audio language you desire*, with the current Audio Channel Number (1) and the total number of Audio Channels (2) displayed. Press AUDIO again to select
another audio language. The audio display will disappear automatically if the ‘AUDIO’ button is not pressed within for 3 seconds.
* Some DVDs only allow access to this function through the DVD menu.
Audio Language
15
4. A-B REPEAT
a. During playback press ‘A-B’ to set the Starting Point A.
b. Press ‘A-B’ a second time to set the Ending Point B. The player
will repeatedly play the part between Point A and Point B.
c. Press A-B a third time to cancel A-B repeat and resume normal
playback.
A-B Repeat Starting Point
A-B Repeat Ending Point
A-B Repeat Cancelled
5. 1/ALL REPEAT
a. During playback press ‘1 ALL/REPEAT’ repeatedly to cycle through
the repeat modes.
Chapter:
Title:
All:
Repeat Off:
Repeat the current chapter
Repeat the current title
Repeat all chapters and titles
Resume normal playback
The ‘Chapter’ repeat display is shown below:
Chapter Repeat
16
6. ZOOM
During playback press ‘ZOOM’ to enlarge the picture by 2X, 3X , 4X.
(1) Press “ZOOM”one time, the picture will be enlarged 2X.
(2) Press “ZOOM” a second time, the picture will be enlarged 3X.
(3) Press “ZOOM” a third time, the picture will be enlarged 4X.
(4) Press “ZOOM” a fourth time, the picture will return to normal size.
Zoom
K. Playing Audio CDs
When playing an audio CD press the DISPLAY button repeatedly on
the remote to view time information. The options below are displayed
in the following sequence.
CD Display Mode
Single Elapsed
Single Remain
Total Elapsed
Total Remain
Display Off
Single Elapsed When Playing Audio CDs
Single Elapsed: The current track playing and elapsed playing time of
that track is displayed on the screen.
Single Remain: The current track playing and the amount of time
left to play on the track.
17
Total Elapsed: The current track playing and the total time that the
CD has been playing.
Total Remain: The current track playing and the amount of time
remaining on the CD.
Display Off:
The CD time information is not displayed.
USING THE1/ALL REPEAT FEATURE
The default mode for the Repeat feature is OFF. Pressing REPEAT
consecutively changes the repeat options:
• Track- repeats the track that is playing.
• All- repeats the disc that is playing.
• Repeat Off
As you toggle through the options, the repeat option changes. The selected
repeat option loops repeatedly until you turn it off.
L. Playing MP3 Discs
MP3 is a format for storing digital audio. An audio CD-quality song is
compressed into the MP3 format with very little loss of audio quality
while taking up much less disc space. CD-R /RW discs that have
been encoded in MP3 format are compatible with this system.
When an MP3 disc is inserted into the unit, the menu screen appears
automatically. You can use the menu screen to select your desired
folders and songs or the system plays the songs in the order they
were burned onto the disc.
18
1. Press the or button to choose a folder from the folder list on
the left side of the screen.
2. Press ENTER to select the highlighted folder. The songs available in the folder will be listed.
3. Use the
or
button to choose a song from the list. Press
ENTER to select and begin playback of the highlighted song.
4. Use the
( NEXT ) button to move to the next song. Press the
(PREVIOUS) button to move to the beginning of the previous
song.
USING THE REPEAT FEATURE
The default mode for the Repeat feature is OFF. Pressing REPEAT
consecutively changes the repeat options:
• Repeat One (repeat playback of a song)
• Repeat Folder (repeat playback of a specific folder)
• Repeat Off (normal playback)
As you toggle through the options, the repeat mode changes. The
selected repeat mode loops repeatedly until you turn it off.
Note:
“
” icon in front of a file name indicates that this is a folder, not an
MP3 file.
“MP3” icon in front of a file name indicates that this is a MP3 file.
Note:
Due to the company’s policy of constant improvement and technical refinement, the company reserves the right to change or alter software.
19
M. Connecting to Other Electronic Equipment
1. Connecting to a TV or Another Monitor ( Refer to Figure 9)
a. Set the AV In/Out Switch to the “Out” Position.
b. Connect one end of the audio/video cable’s black (1/8” plug) plug
into the unit’s DVD AV jack and connect the other end to the AUDIO
INPUT jacks on your TV or Monitor using the AV adapter cable
(white = left audio channel, red = right audio channel, yellow = video).
Figure 9
2. Connecting to a Game or Camcorder (Refer to Figure 9)
a. Set the AV In/Out Switch to the “In” Position.
b. Connect one end of the audio/video cable’s black (1/8” plug) plug
into the unit’s DVD AV jack and connect the other end to the AUDIO
Output jacks on your Camcorder or other DVD using the AV adapter
cable (white = left audio channel, red = right audio channel, yellow =
video).
Note: Do not connect an AV signal source with the AV jack when the
AV In/Out Switch is set to the “Out” position.
3. Headphones
Optional wired headphones may be used with the unit. Simply plug in
the headphones to either Headphone 1 jack* or Headphone 2 jack on
the right side of the DVD player or the Headphone jack on the monitor.
( Refer to Figure 10 and 11)
20
*
*
Figure 10
*Plugging into Headphone jack 1 disables the internal speakers.
4. SD/MMC/MS Card and Thumb Drive/Digital Cameras
With no disc in the unit, insert either an SD/MMC/MS card, digital camera or Thumb Drive with JPEG or MP3 files into the appropriate input.
1) Insert an SD/MMC/MS Card into the SD/MMC/MS Slot on the front of
the unit.
2) Insert a Thumb Drive into the USB jack on the left side of the unit.
3) Connect the USB cable (not supplied) from a camera into the USB
port on the left side of the unit.
4) Press the DVD/SD-USB button. Choose the folder you desire by using the “UP” and “DOWN” buttons.
Design and Specifications are subject to change for product
improvement without notice.
N. Playing JPEG Files
1) Load the JPEG Disc into tray.
2) The DVD player will display a folder and the JPEGS contained within
the folder in a thumbnail view. Choose the picture you desire by using
the “UP” and “DOWN” buttons.
3) You can view the JPEG file you selected by pressing
“PLAY” or “ENTER” buttons.
4) Pressing the “DOWN” button rotates the picture 90 degrees
clockwise.
5) Pressing the “UP” Key will return to the JPEG menu.
6) When previewing the file, pressing “SUBTITLE”, “AUDIO” or
“AB”, an icon will appear on the display indicating that these options
are not available.
21
O. Connecting the Monitor to a Game or Camcorder
(Refer to Figure 11)
1) Set POWER ON/OFF to the ON position.
2) Using the 1/8 to RCA A/V adapter cable connect the signal output
from an auxiliary source such as Camcorder, Video Game, DVD
Player, Video Cassette Recorder etc. to the AV IN Jack of the Monitor.
3) Use the BRIGHTNESS UP/DOWN control to adjust the picture to
the desired setting.
4) Use the VOLUME UP/DOWN control to decrease or increase
volume level.
Figure 11
22
P. Setup
1. General Setup Page
1) With no disc inside the player, press ‘SETUP’ to display the Main screen
of the Setup Menu on the screen and “General Setup Page” appears and
“
” is highlighted. Press ‘SETUP’ again to exit the Setup Menu.
2) Press the ENTER button, “TV Display” is highlighted.
3) Press the or button to select the other menus in general setup
page.
4) Press
to enter the sub menu.
5) Press the or button to select the sub menu and press the
ENTER to confirm your selection.
6) Repeat steps 3-5 for other menus.
Note: Press
to return the previous menu.
a) TV Display
Normal/PS: When the player outputs signal to a normal TV, a normal
picture is shown on the full screen.
Normal/LB: When the player outputs signal to a normal TV, a normal
picture is shown on the screen with a black strip at both the top and
bottom of the screen.
Wide: When the player outputs signal to a wide screen TV, a wide
picture is shown on the full screen.
b) Angle Mark
On: The screen will show the angle mark icon. (If an angle option is
available).
Off: The screen will not display the angle mark.
c) Screen Saver
On: Enables screen saver.
Note: The DVD player will enter the Screen Saver mode after approximately five minutes if the same image remains on the screen.
Off: Disables screen saver.
d) Last Memory
On: The unit will return to the last position on the disc when the tray
is opened or the AV In/Out switch position is changed.
Off: The unit will not return to the last position on the disc.
23
Note: The Last Memory position function will only work when the
disc tray is opened.
2.Video Quality Setup
button to select “Video Quality
1) In Setup menu, press the
or
is highlighted. Press ENTER to enter the video quality
Setup” and
setup page.
2) Press the ENTER button, “Brightness” is highlighted.
3) Press the or button to select the other menus in video quality
setup page.
4) Press
to enter the sub menu.
5) Press the
button to adjust the quantity and press the
or
ENTER to confirm your selection.
6) Repeat steps 3-5 for other menus.
to return the previous menu.
Note: Press
a) Brightness
b) Contrast
c) Saturation
d) Hue
3. Password
In Setup menu, press the
or
button to select “Password Setup
Page” and is highlighted. Press ENTER to enter the password page.
Press ENTER twice to enter the Password Change Page. Input the Old
Password or the Default Password, the New Password, and Confirm
the New Password. Press ENTER to confirm the change.
Note: The default password is 3308.
4. Preference Page
1) In Setup menu, press the
or
button to select “Preference Page”and
is highlighted. Press ENTER to enter the preference page.
2) Press the ENTER button, “Audio” is highlighted.
3) Press the or button to select the other menus in preference page.
to enter the sub menu.
4) Press
5) Press the or button to select the sub menu and press the ENTER
to confirm your selection.
6) Repeat steps 3-5 for other menus.
Note: Press
to return the previous menu.
24
a) Audio: Selects the audio language you desire. Use the UP or
DOWN buttons to select another audio language.
b) Subtitle: Selects the subtitle language you desire. Use the UP or
DOWN buttons to select another subtitle language. To turn subtitles
OFF use the UP or DOWN button and select OFF.
c) DISC MENU: Selects the menu language you desire. Use the UP
or DOWN buttons to select another menu language.
Note: Language selection for the audio,subtitle and disc menu is only
available for discs that are recorded in different languages. If the
selected language is not available, the player will play and display on
the screen the language that was originally recorded on the disc.
d) Parental
Select ‘Parental’ using the
and button, then press RIGHT to enter
the submenu. Select the parental level you desire using
and
the
button for discs with lock-out function or multiple rating levels. These are
listed from the lowest level (1 KID SAFE) to the highest level (8 ADULT).
Press ENTER and input 4 digit password, then press ENTER again to
confirm the parental level setting.
Note: The level of 8 Adult is the factory default.
e) Default
and button, then press
to enter the
Select ‘Default’ using the
submenu. Press ENTER to make the settings return to the factory set
mode.
Note: The parental setting is not affected by the default reset function.
Note: The Default Password is 3308. This password is always effective
even after you have selected your own password and changed it. To
avoid the possibility of others using the default password to set the
parental level and change the password, you can record this default password in another area and delete it from this manual. Some discs can be
limited depending on the age of users while some discs cannot.
25
Q. Specifications
DVD Player
Compatible DISC: DVD/CD/MP3
Signal system: NTSC
Panel size: 9 inch
Frequency response: 20 Hz to 20 kHz
Video output: 1 Vp-p/75 Ohm, unbalanced
Audio output: 1.4Vrms/10kOhm
Audio S/N: Better than 60 dB
Dynamic range : Better than 85 dB
Laser: Semiconductor Laser, Wave Length: 650 nm/795 nm
Power source: DC 9-12V
Power consumption: 12 W
Operating temperature: 41~95°F (5~35°C)
Weight :2.22lb (1.013 kg)
Dimensions (W x D x H): 9.41 X 6.33 X1.69inches
(239 x 161 x 43mm)
Battery Type:Li-ploymer
Monitor
Signal System: NTSC
Screen Size: 9 inch
Power Supply: DC 9V
Weight : 1.12lb (0.51kg)
Dimensions (W x D x H): 10.0 X 8.49 X 0.53inches
(246 x 208 x 13mm)
R. Rechargeable Battery Installation and Use
The player utilizes a set of long-life Li-ploymer batteries to provide
portability. Li-ploymer batteries feature high storage capacity and
low level of degradation. This means the Li-ploymer batteries do not
have “Memory Effect” and thus can be recharged safely regardless
of whether the battery is fully or only partially discharged. Please
fully charge the battery prior to first use.
26
NOTE: When the DVD player is used with the battery as a power
source, ensure that the battery has been charged for at least eight
hours prior to connecting it to the DVD player.
If you plan not to use the battery for an extended period of time (one
week or longer), it is recommended that you first fully charge the
battery and store it away properly. For longer periods of storage,
please recharge the battery at least once every two months to maintain the battery in optimum condition. Under no circumstances short
the battery terminals, store the battery in a metal container, or leave
the battery in a humid or damp environment. Ideally, store the battery in an airtight container with desiccant or other dehumidifying
agent. Each full recharge takes approximately five-hours and one
full charge can provide power to the player for at least 2.5 hours.
During recharge, the red indicator will stay on. Once fully recharged,
the LED on the right side of the unit will turn off. At this point you may
remove the wall plug and stop charging.
Precautions related to Battery Recharge:
1. Once the battery is fully discharged, immediately recharge (regardless of whether you plan to use battery or not) in order to maximize battery life.
2. Recharge efficiency will degrade when environmental temperatures drop below 50oF (10oC) or exceed 95oF (35oC).
3. Please remove battery from the player and store it properly if the
player is not to be used for long time. During this period, please
recharge the battery at least once every two months to avoid irreparable damage to the battery.
Using your Rechargeable Battery
1. Please make sure you always use only the AC adapter included
with the player to recharge your battery. The DC Power Adapter
cannot be used to recharge the battery.
2. To charge the battery, please connect the power jack directly into
the DVD player and leave the POWER switch in the OFF position.
27
Installing the Battery Pack:
1. Set the Power ON/OFF switch to the OFF position.
2. Disconnect the DVD player from the AC power source.
2. Flip down the monitor.
3. Push the battery towards the rear of the DVD player until it locks into
position. The lock position is indicated by a click. The battery will fit
tightly to the player.
Figure 12. Installing the DVD Player Battery
Removing the Battery Pack:
1. Set the Power ON/OFF switch to the OFF position.
2. Press the release button on the side of battery.
3. Pull the battery away from the rear of the DVD player.
Press
Figure 13. Removing the DVD Player Battery
28
S. Troubleshooting
PROBLEM
No sound or
distorted sound
SOLUTION
• Make sure your DVD is connected properly.
Make sure all cables are securely inserted
into the appropriate jacks.
Can’t advance
through a movie
• You can’t advance through the opening
credits and warning information that appears
at the beginning of movies because the disc
is programmed to prohibit that action.
The icon ( )
appears on
screen
The feature or action cannot be
completed at this time because:
1. The disc’s software restricts it.
2. The disc’s software doesn’t support the
feature (e.g., angles)
3. The feature is not available at the
moment.
4. You’ve requested a title or chapter
number that is out of range.
Picture is
distorted
• The disc might be damaged. Try another
disc.
• It is normal for some distortion to appear
during forward or reverse scan.
No forward or
reverse scan
• Some discs have sections that prohibit rapid
scanning or title and chapter skip.
• If you try to skip through the warning information and credits at the beginning of a
movie, you won’t be able to. This part of the
movie is often programmed to prohibit
skipping through it.
29
Troubleshooting (Cont)
PROBLEM
SOLUTION
IR sensor
inoperative
• Verify that the batteries in the remote are
fresh.
• Verify that the remote sensor eye is not
obstructed.
Disc won’t play
• Insert a disc with the label side facing
up.
• Check the type of disc you put into disc
tray. This DVD only plays digital video
discs, audio CDs and MP3s.
Play starts, but
then stops
immediately
• Both the unit and the disc are coded by
region. If the regional codes don’t
match, the disc can’t be played. This
DVD is Region Number 1.
• The disc is dirty. Clean it.
• Condensation has formed. Allow
player to dry out.
30
90 DAY LIMITED WARRANTY
Applies to Audiovox Video Products
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of
this product that should this product or any part thereof, under normal use and conditions,
be proven defective in material or workmanship within 90 days from the date of original
purchase, such defect(s) will be repaired or replaced with reconditioned product (at the
Company's option) without charge for parts and repair labor. A game controller, if supplied,
is similarly warranted for ninety (90) days.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered
with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s),
transportation prepaid, to the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to
correction of antenna problems, to costs incurred for installation, removal or reinstallation of
the product, or to damage to digital memory/media devices, gaming devices, discs, speakers,
accessories, or electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the
Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/
bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL
THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE
PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO
THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR
IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the
Company any liability other than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion
or limitation of incidental or consequential damage so the above limitations or exclusions may
not apply to you. This Warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
U.S.A. : AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD, HAUPPAUGE, NEW YORK 11788
l 1-800-645-4994
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
128-5556G
© 2007 Audiovox Electronics Corporation
31
© 2007 Audiovox Electronics Corporation
128-8056
32