Uniden DCX730 - DCX 730 Cordless Extension Handset Owner`s manual

Welcome
Congratulations on your purchase of the Uniden DCX730
accessory handset and charger. You can place this fully
featured cordless handset anywhere your home has AC power.
Note: Illustrations in this manual are used for explanation
purposes. Some illustrations may differ from the actual unit.
Accessibility
Uniden provides a customer service hotline for accessibility
questions. If you have a disability and need customer service
assistance or if you have any questions about how Uniden's
products can accommodate persons with disabilities, please
call the accessibility voice/TTY line: 1-800-874-9314.
Our customer care hours as well as accessibility information
can be found on our website, www.uniden.com, under the
"Accessibility" link." If your call is received outside of our
business hours, you can leave us a message and we will call
you back.
Important!
The DCX730 accessory handset will not operate until it is
registered to a Uniden main base. This manual describes how
to set up your new handset; for more detailed instructions on
operating your new handset, please refer to the manual
supplied with your base.
Terminology Used in this Manual
Base
The main part of the phone that connects to your phone line
and lets you make and receive calls.
Charger
A cradle that charges an accessory handset. It connects to
power but not to a phone line.
Accessory A handset that works with an expandable phone base.
Handset
Accessory handsets must be registered to a base.
Standby
The handset is not in use. If it is off the cradle, no line has
been activated. No dial tone is present.
Station
Any handset or the base.
Talk
A telephone line has been activated on the handset or the
base, enabling a dial tone.
Uniden® is a registered trademark of Uniden America Corporation.
1
Compatible Bases
This handset is compatible with Uniden's 2.4 GHz Digital
Expandable phone system: the DCT736/DCT738 series, the
DCT746/DCT748 series, the DCT756/DCT758 series, the
DMX776/778 series, and the DCT646/DCT648 series. Visit
www.uniden.com for the most up-to-date list of compatible
bases.
Installing the Accessory Handset
Checking the Package Contents
Make sure your package contains the following items. If any
items are missing or damaged, contact our Customer Service
Hotline. See back cover page for contact information.
• Cordless Handset
• Charging Cradle
• AC Adapter, model # AD-0005
Input: 120V AC 60 Hz
Output: 9V DC 210 mA
• Rechargeable NiMH Battery
Pack, model # BT-1004
Capacity: 500 mAh, 3.6V
• Beltclip
• Printed Material
Installing the Battery
Follow the steps below to install the
rechargeable battery pack.
1. Using the finger indentation, press in
on the battery case cover and slide it
down to remove it.
2. Plug the battery connector into the
battery compartment jack. Be sure to
match the red and black wires to the
label near the jack.
3. Gently pull on the battery wires. If the
battery connector comes loose, try
connecting it again.
4. Replace the battery case cover and
slide it up until it clicks into place.
Note: Use only the Uniden BT-1004
rechargeable battery pack supplied
with your cordless telephone.
2
Charging the Accessory Handset
The handset is powered by a rechargeable battery pack that
automatically recharges when the handset is placed in the
charger.
1. Connect the AC
adapter to the DC IN
9V jack and to a
120V AC outlet that
is not controlled by a
wall switch.
Caution: Use only
the Uniden AD-0005
adapter.
2. Set the charger on a
desk or tabletop, and
place the handset in
the charger with the keypad facing forward.
3. Make sure that the charge LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and
the handset makes good contact with the charging contacts on
the charging cradle.
4. Charge the handset battery pack for at least 15-20 hours before
using your new handset for the first time.
Registering the Handset
You must register the handset to the base before you can use it.
Only one handset can be registered at a time. (If an accessory
handset has ever been registered to a base, you must reset the
handset before you can register it to a new base.)
Note: The model number for your telephone base is located
on the bottom of main base unit.
3
For DCT73 and DCT75
Series Bases (DCT736,
DCT738, DCT756, DCT7565,
DCT758, DCT7585)
To register to a DCT73 or
DCT75 series base, place the
accessory handset in the
base. While the handset is
registering, HANDSET
REGISTERING appears in
the LCD. When
REGISTRATION COMPLETE
is displayed, the handset has
been registered to the base.
If REGISTRATION FAILED
appears, remove the handset
from the base and try again.
For Other Base Models
1. Select your base model from the list and follow the directions:
MODEL
DIRECTIONS:
DCT646
DCT746
Disconnect the base AC adapter. Press and hold
[find handset] while you reconnect the adapter.
DCT6465
DCT6485
Disconnect the base AC adapter. Press and hold
[intercom] while you reconnect the adapter.
DCT648
Disconnect the base AC adapter. Press and hold
[intercom/find handset] while you reconnect the adapter.
DCT748
Disconnect the base AC adapter. Press and hold
[find hs/ ] and [ ] while you reconnect the adapter.
DCT7488
Press the MENU soft key. Scroll down to HS
REGISTRATION and press the OK soft key.
DMX776
DMX778
Press and hold the registration button on the bottom of the
base until the base LEDs start blinking.
2. On the handset, press and hold [#/→] until you hear a beep and
see HANDSET REGISTERING in the display.
3. When REGISTRATION COMPLETE is displayed, the handset
has been registered to the base. If REGISTRATION FAILED
appears, please try these steps again.
4
Resetting the Handset
If you want to register the handset to a different base or
replace a handset with another one, you must first clear the
registration information from the base and the handset.
1. Press and hold [ ] and
[#/ ] for at least 5 seconds,
until the SYSTEM RESET
menu appears.
2. Select the DEREGISTER
HS submenu by pressing [select/ ].
WHICH HANDSET? appears in the display.
3. Use [ ] or [ ] to select the handset ID to be deregistered from the list, and then press [select/ ].
DEREGISTER HS appears.
4. Press [ ] to move the cursor to YES, and then press
[select/ ]. You will hear a confirmation tone.
Resetting the Handset Without the Base
If the original base this handset was registered to is not
available for some reason (for example, it is lost or somehow
incapacitated), you can still reset the handset and use it with
another base.
1. Press and hold [ ] and [#/ ] for more than 5 seconds.
2. Press [ ] to move the cursor to REPLACING BASE and
then press [select/ ]. REPLACE BASE appears.
3. Press [ ] to move the cursor to YES, and then press
[select/ ]. You hear a confirmation tone, and the handset
deletes its own link to the base without trying to contact
the base.
4. Register the handset to the new base.
5
Using the Interface
Parts of the Handset
1. Antenna
2. Speaker phone
speaker and ringer
3. Battery
compartment
4. New message LED
5. Earpiece
6. LCD display
7. [menu/clear]
8. [redial/pause]
9. [ /flash]
(talk/flash)
10. [ ] (phonebook)
11. [∗/tone/ ]
12. [xfer/intercom]
(transfer/intercom)
13. [select/ ]
(select/messages)
6
14. [
] (up)
15.[ ] (end call)
16. [ ] (Caller ID)
17. [ ] (down)
18. [#/ ] (pound)
19. [ ] (speaker)
20.Microphone
21.Charging contacts
Reading the Display
The handset display uses icons to tell you the status of your
phone. The table below lists the icons and what they mean.
ICON
STATUS
DESCRIPTION
Standby/
Talk
The battery icon indicates the handset
battery status:
full, medium, low, and empty.
Standby
The ringer off icon indicates that the
ringer is turned off.
Talk
The mute icon appears when you mute
the handset.
Talk
The call record icon appears while
recording a conversation.
Talk
The boost icon appears when the
Clarity Boost feature is activated.
Talk
The speaker icon appears when the
handset speaker phone is in use.
Talk
The privacy icon appears when
Privacy Mode is turned on.
The Standby Screen
When the phone is in standby, the display shows the following:
Using the Four-way Function Key
Your handset has a four-way
function key that allows you to
move the cursor or pointer on
the display and access the
most commonly used features
at the touch of a button. Press
the left side of the key to open
the phonebook. Press the right
side to open the Caller ID list.
7
Volume up
Open the
phonebook
Four-way
function key
Open the
Caller ID list
REDIAL
Volume
A NUMBER
down
To use this four-way key, place your thumb over the key on the
handset and move to the four positions to get the feel of how it
moves and operates.
Using the Handset Menus
To open the menu, press [menu/clear]. Select the option you
want by pressing the four-way function key. This will move the
cursor; the option currently selected has a triangle beside it.
Activate the selected option by pressing [select/ ]. To exit the
menu and return to standby, press [ ].
If you do not press a key within 30 seconds, the phone will
time out and exit the menu. When setting the date and time,
the time-out period is extended to two minutes.
Making and Receiving Calls
With the earpiece
Make a
call
Answer
a call
Hang
up
With the speaker phone
1.Remove the handset from
the charger.
2.Dial the number.
3.Press [ /flash].
1.Remove the handset from
the charger.
2.Dial the number.
3.Press [ ].
1.Pick up the handset.*
2.Press [ /flash].**
1.Pick up the handset.*
2.Press [ ].
Press [ ] or return the
Press [ ] or return the
handset to the cradle.
handset to the cradle.
* If AutoTalk is on, the phone answers when you remove the
handset from the charging cradle.
** If Any Key Answer is on, you can press any key in the
twelve-key pad.
Using Caller ID and Call Waiting
If you subscribe to Caller ID, you can store up to 100 Caller ID
records. Your phone shares memory between your phonebook
and Caller ID entries. If you have 100 phonebook entries,
Caller ID records won't be saved (but will display when the
call comes in).
Press [ ] to open the Caller ID record list. The first thing you
will see is the summary screen. From the summary screen,
you have the following options:
8
Scroll through the
records
To scroll through the records from A to Z,
press [ ]. To scroll trough the records from Z to
A press [ ].
Jump to records that
Press the number key corresponding to the letter
start with a certain
you want to jump to.
letter
Store a record in the Find the record you want to store and press
phonebook
[select/ ].
Dial a record
Find the entry you want to dial and press
[ /flash] or [ ].
Delete a record
Find the entry you want to dial and press
[menu/clear].
Delete all records
Press [menu/clear].
Exit the Caller ID list Press [ ] or press [
] again if you are on a call.
Using Call Waiting
If you subscribe to call waiting, a tone sounds if a call comes
in when you are on the phone. If you subscribe to Caller ID on
call waiting, the Caller ID information of the waiting call
appears on the display. Press [ /flash] on the handset to
accept the waiting call. After a short pause, you will hear the
new caller. To return to the original caller, press [ /flash] on the
handset again.
Redialing a Number
To redial one of the last 3 numbers dialed on this handset,
press [redial/pause] when the phone is in standby. This opens
the redial list. Use [ ] and [ ] to find the number you want to
dial, and press [ /flash] or [ ].(You can also press [ /flash] or
[ ], and then [redial/pause] to redial the last number dialed.)
Using the Phonebook
You can store up to 100 names and numbers in the
phonebook. Your handset shares memory between your
phonebook and Caller ID entries. When all the phonebook
entries are full, you will hear a beep and MEMORY FULL
appears. You cannot store any additional names and numbers
unless you delete some of the existing ones.
9
Press [ ] to enter the phonebook. Once in the phonebook,
you have the following options:
Scroll through
the entries
To scroll through the phonebook from A to Z, press
[ ]. To scroll through the phonebook from Z to A
press [ ].
Jump to entries
that start with a
certain letter
Press the number key corresponding to the letter you
want to jump to.
Store a new
entry
Move the cursor to STORE NEW, then press
[select/ ].
1.Move the cursor to COPY and press [select/ ].
2.Select the handset you want to copy the entries to and
press [select/ ].
Copy entries to 3.Select ONE MEMORY or ALL MEMORY and press
another handset
[select/ ].
4 If you choose ONE MEMORY, find the entry you want
to copy and press [select/ ].
Dial an entry
1.Move the cursor to DIAL/EDIT and press [select/
2.Find the entry you want to dial.
3.Press [ /flash] or [ ].
].
Delete an entry
1.Move the cursor to DIAL/EDIT and press [select/
2.Find the entry you want to delete.
3.Press [menu/clear].
].
Delete all entries Move the cursor to DELETE ALL and press [select/
].
Close the
phonebook
Press [ ] or press [
] again if you are on a call.
Adjusting the Volume
Ringer
Volume
Choose from three ringer volume settings (off, low, and
high). With the phone in standby, use [ ] and [ ] to adjust
the ringer volume.
Choose from six volume levels for the earpiece. While on a
]
Earpiece
call, press [ ] to make the earpiece volume louder or [
Volume to
make it softer.
Choose from six volume levels for the handset
] to make the
speaker volume louder or [ ] to make it softer.
Speaker speakerphone. While on a call, press [
Volume
10
Hold, Conference, Transfer, and Intercom
Put a call on
hold
Press [xfer/intercom]. If you leave a caller on hold for
more than five minutes, the call will be disconnected.
To return to the party on hold, press [ /flash] or [ ].
Join an inprogress call
To join a call already in progress, press [ /flash] or
[ ]. You can hang up normally; the other station
remains connected to the call.
Press [xfer/intercom]; the call is placed on hold. Use
[ ] or [ ] to select the station you want to transfer
the call to, and press [select/ ]. (To page all
Transfer a call stations at once, select ALL.) When the other station
answers, you can talk to the station; the outside call
remains on hold. If the other station accepts the call,
you will be disconnected.
Cancel a
transfer
To cancel the transfer and return to the call, press
[ /flash] or [ ].
Accept a
transferred
call
To answer the transfer page and speak to the
transferring station, press [ /flash] or [xfer/intercom].
To accept the call and speak to the caller, press
[ /flash] again.
With the phone in standby, press [xfer/intercom].
Make an
Use [ ] or [ ] to select the station you want to talk
intercom page with, then press [select/ ]. (If you select ALL, all
other stations will be paged.)
Cancel a page To cancel the intercom page, press [ ].
Press [ /flash] or [xfer/intercom]. If AutoTalk is on,
Answer an
handset automatically answers the page when
intercom page the
you remove it from the cradle.
Muting the Ringer (One Call Only)
While the handset is ringing, press [ ] to mute the ringer for
this call. The phone will ring again on the next call. (The
handset must be off the cradle to mute the ringer.)
11
Muting the Microphone
To mute the microphone so the caller can't hear you, press
[menu/clear]. Move the cursor to select MUTE and then press
[select/ ]. MUTE ON and appear in the display. Repeat the
procedure to cancel muting.
Privacy Mode
To prevent other stations from interrupting a call, press
[menu/clear]. Move the cursor to select PRIVACY MODE and
then press [select/ ]. PRIVACY MODE ON and P appear in
the display. Repeat the procedure to turn off privacy mode.
Adjusting the Audio Tone
If you aren't satisfied with your phone's audio quality, you can
adjust the Audio Tone of the earpiece. While on a call, press
[select/ ] to cycle through the three audio tone options: low,
natural and high. (The default setting, Natural Tone, is
recommended for hearing aid users.) When the desired option
appears on the display, stop. After two seconds, the displayed
audio tone is set, and the display returns to normal.
Using the Clarity Boost Feature
If you encounter interference while you are on a call, you can
manually improve the sound by turning on the clarity boost
feature. Press [menu/clear], move the cursor to select
CLARITY BOOST, and then press [select/ ]. BOOST ON and
B appear in the display.
Use the same procedure to turn off clarity boost feature,
BOOST OFF appears.
Accessing Your Answering Machine
If your base has an answering machine, you can use your
handset to get your messages and change your answering
machine setup. To access the answering machine, press
[select/ ]. The answering machine announces the number of
new and old messages and then wait for your next command.
You have the following options:
12
Play messages
Press [ /2]. The system plays the message
then announces the time and date the
message was received.
Repeat a message
Press [ /1] to go to the start of the current
message. Press [ /1] repeatedly to go back
to a previous message.
Skip a message
Press [ /3] to go to the beginning of the next
message.
Delete a message
While a message is playing, press [∅/4]. The
message is permanently deleted.
End message
review
Press [ /5] to stop the message playback.
Record a memo
Press [7] to start recording. Press [ /5] or [7] to
stop.
Turn the answering Press [6] to turn the answering machine on.
machine on or off Press [9] to turn it off.
Press [8] to start recording. Press [ /5] or [8] to
Record a greeting stop.
Press [0] to hear the Help prompts.
Listen to Help
Exit and hang up
Press [ ] to exit the system and return to
standby.
Screening Calls
If your base has an answering machine, you can listen to
callers as they leave a message. Press [select/ ] when the
system is answering to listen to the caller without answering
the phone.
Accessing Voicemail
If you subscribe to a voice mail service, you can program your
handset to automatically dial the access number.
1. Press [menu/clear].
2. Move the cursor to HANDSET SETUP and press [select/ ].
3 Move the cursor to EDIT VOICE MAIL and press [select/ ].
13
4. Enter your access number (up to 20 digits). If you need the
phone to wait before sending the next digits, press
[redial/pause] to insert a two-second pause. For a longer
pause, press [redial/pause] multiple times. Each pause counts
as one digit.
5. Press [select/ ] when you are finished.
Once you program your access number, press [select/ ] to
dial your voice mail service.
Maintenance
Battery Life
With average use, your battery talk time will be approximately
7 hours and standby time will be approximately 10 days. For
optimum performance, be sure to return the handset to the
cradle after each call. If the handset is left off of the charging
cradle, the actual talk time duration will be reduced respective
to the amount of time the handset is off the cradle.
Note:
Do not place the power cord where it creates a trip hazard or
where it could become chafed and create a fire or electrical
hazard.
Low Battery Alert
When the battery pack is very low, the display shows LOW
BATTERY and the empty battery icon. If the phone is in
standby, none of the keys will operate. If you are on a call,
complete your conversation as quickly as possible, and return
the handset to the charging cradle.
Battery Replacement and Handling
With normal usage, your battery should last about one year. If
the talk time becomes short even after the battery is recharged,
please replace the battery. You can purchase a replacement
battery by calling Uniden's Parts department. See the back
cover page for contact information.
Warning
To avoid the risk of personal injury or property damage from
fire or electrical shock, use only the BT-1004 battery pack.
14
Caution:
- This equipment contains a rechargeable Nickel-MetalHydride battery.
- Do not remove the batteries to charge them.
- Never throw the battery in a fire or disassemble or heat it.
- Do not remove or damage the battery casing.
- Nickel is a chemical known to state of California to cause
cancer.
- Do not short-circuit the battery.
- Do not charge the battery used in this equipment in any
charger other than the one designed to charge this battery
as specified in the owner's manual. Using another charger
may damage the battery or cause the battery to explode.
- Rechargeable batteries must be recycled or disposed of
properly.
Clean the Battery Contacts
To maintain a good charge, clean the
charging contacts on the handset
once a month. Dampen a cloth with
plain water. Gently rub the damp
cloth over the charging contacts until
all visible dirt is removed. Dry the
contacts thoroughly before returning
the handset to the charging cradle.
Caution: Do not use any chemical
products (benzene, alcohol, paint
thinner, etc.), or you may discolor
the surface and damage the finish.
The FCC Wants You To Know
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as detailed
by the owner's manual, could void your authority to operate this
product.
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
15
Privacy of communications may not be ensured when using this
phone.
To insure the safety of users, the FCC has established criteria for the
amount of radio frequency energy various products may produce
depending on their intended usage. This product has been tested and
found to comply with the FCC's exposure criteria. For body worn
operation, the FCC RF exposure guidelines were also met when used
with the Uniden accessories supplied or designed for this product.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines and should be avoided.
I.C. Notice
Terminal Equipment
NOTICE:This equipment meets the applicable Industry Canada
Terminal Equipment Technical Specifications. This is confirmed by the
registration number. The abbreviation, IC, before the registration
number signifies that registration was performed based on a
Declaration of Conformity indicating that Industry Canada technical
specifications were met. It does not imply that Industry Canada
approved the equipment.
NOTICE:The Ringer Equivalence Number (REN) for this terminal
equipment is marked on the equipment itself. The REN assigned to
each terminal equipment provides an indication of the maximum
number of terminals allowed to be connected to a telephone interface.
The termination on an interface may consist of any combination of
devices subject only to the requirement that the sum of the Ringer
Equivalence Numbers of all the devices does not exceed five.
Radio Equipment
The term "IC:" before the radio certification number only signifies that
Industry Canada technical specifications were met. Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the
device. "Privacy of communications may not be ensured when using
this telephone".
16
One Year Limited Warranty
Important: Evidence of original purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF
WARRANTY: Uniden warrants, for one year, to the original retail owner, this
Uniden Product to be free from defects in materials and craftsmanship with only
the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate and
be of no further effect 12 months after the date of original retail sale. The warranty
is invalid if the Product is (A) damaged or not maintained as reasonable or
necessary, (B) modified, altered, or used as part of any conversion kits,
subassemblies, or any configurations not sold by Uniden, (C) improperly installed,
(D) serviced or repaired by someone other than an authorized Uniden service
center for a defect or malfunction covered by this warranty, (E) used in any
conjunction with equipment or parts or as part of any system not manufactured by
Uniden, or (F) installed or programmed by anyone other than as detailed by the
owner's manual for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this
warranty at any time while this warranty is in effect, warrantor will either, at its
option, repair or replace the defective unit and return it to you without charge for
parts, service, or any other cost (except shipping and handling) incurred by
warrantor or its representatives in connection with the performance of this
warranty. Warrantor, at its option, may replace the unit with a new or refurbished
unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND
ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF
AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE
WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION
OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT
OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some
states do not allow this exclusion or limitation of incidental or consequential
damages so the above limitation or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state. This warranty is void outside
the United States of America and Canada. PROCEDURE FOR OBTAINING
PERFORMANCE OF WARRANTY: If, after following the instructions in the
owner's manual you are certain that the Product is defective, pack the Product
carefully (preferably in its original packaging). Disconnect the battery from the
Product and separately secure the battery in its own separate packaging within
the shipping carton. The Product should include all parts and accessories
originally packaged with the Product. Include evidence of original purchase and a
note describing the defect that has caused you to return it. The Product should be
shipped freight prepaid, by traceable means, to warrantor at:
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
17
At Uniden, we'll take care of you!
Thank you for purchasing a Uniden product. if you have any
questions or problems, please do not return this product to the
place of purchase.
Having
trouble?
Need a part?
Help for our
customers
with special
needs
Our customer care specialists are here
to help you! Visit our website at
www.uniden.com or call our Customer
Service Hotline at 1-800-297-1023
during regular business hours. *
To order headsets, additional handsets,
replacement batteries, or other
accessories, visit our website at
www.uniden.com or call
1-800-554-3988 during regular business
hours. *
If you need special assistance due to a
disability or have questions on the
accessibility features of this product,
please call 1-800-874-9314 (voice or
TTY).
* Central Standard Time. Detailed customer service hours are
available at www.uniden.com.
May be covered under one
4,797,916
5,426,690
5,533,010
5,574,727
5,661,780
5,663,981
5,732,355
5,754,407
5,787,356
5,794,152
5,912,968
5,915,227
5,987,330
6,044,281
6,314,278
6,418,209
6,782,098
6,788,920
6,901,271
6,907,094
Other patents pending.
or more of the
5,434,905
5,581,598
5,671,248
5,758,289
5,801,466
5,929,598
6,070,082
6,618,015
6,788,953
6,914,940
18
following U.S. patents:
5,491,745
5,493,605
5,650,790
5,660,269
5,696,471
5,717,312
5,768,345
5,893,034
5,825,161
5,864,619
5,930,720
6,253,088
6,125,277
6,253,088
6,671,315
6,714,630
6,839,550
6,889,184
6,953,118
7,023,176
UUZZ01616BZ(0)