Uniden ELBT595 - Cordless Phone - Operation Owner`s manual

UP744BH_hyoushi01.eps
ELBT 595
SERIES
OWNER'S
MANUAL
Welcome/Features/Terminology/
Accessibility
2
Controls & Functions
4
Setting up the Phone
6
Choose the best location
6
Battery Backup Feature
7
Install the rechargeable
battery pack
8
Low battery alert
9
Cleaning the battery charging
contacts
9
Connect the base and charge the
handset
10
Mounting the Base Unit on a Wall 11
Standard wall plate mounting
11
Expanding Your Phone
12
Backwards/Forwards
Compatibility
12
Connect the expansion handset's
charger
13
Register the Handset
13
Register expansion handsets to the
main base
14
Changing the Digital Security Code 15
Installing the Holster
15
Optional Headset Installation
16
Installing Uniden's Cordless
Telephone Customization Tool
17
Using the Interface
18
Display Icons
19
Soft Key Function
20
Entering text
22
Main Menu Options
23
System Setup Menu
24
Global Setup
28
Setting the Ringer Options
30
Display Settings (Handset Only) 35
Using the Bluetooth Feature
38
[1]
Contents
Registering a Mobile Phone to the
Main Base Unit
38
Using Bluetooth Headset
(Handset Only)
44
Using Your Phone
48
Making Calls Using the Land Line 48
Receiving a call/AutoTalk
set to Off
50
Hanging Up
51
Switching to the Handset
Speakerphone During a Call
51
Moving out of range
51
Call Waiting
52
Call Waiting Deluxe
52
Placing a Call on Hold
53
Conferencing
53
Mobile Line Transfer
55
Redialing Calls
56
Adjusting Base Ringer and
Speaker Volumes
57
Using the Handset Volume
Setting Menu
58
Mute
59
Mute the Microphone
59
Tone Dialing Switch Over
60
Privacy Mode
60
Find Handset
60
Reminder (Handset only)
61
Using the Phonebook
63
Creating and Editing Phonebook
Entries
63
Storing Caller ID or Redial
Numbers in the Phonebook
66
Storing and Editing Numbers
from the Dial Operation
66
Managing the Phonebook
67
Checking the number of
stored entries
68
Changing the sorting order
68
Naming phonebook groups
69
Making Calls with the Phonebook 69
Caller ID Features
70
Using the Caller ID List
70
Deleting Caller ID numbers
71
Answering Machine
72
Features
72
Setting Up the Answering
Machine
73
Setting Your Outgoing Greeting 76
Using the Answering Machine
77
Recording a phone conversation 79
Screening Calls
79
Do Not Disturb (DND)
80
Remote Operation
81
Multi-Handset Features
83
Using DirectLink Mode
83
Room/Baby Monitor
84
Intercom
85
Transferring a Call
86
Note on Power Sources
87
Power Failure
87
Battery replacement and
handling
87
Warning
87
General Information
88
AC Adapter Information
88
Battery Information
88
Troubleshooting
89
Bluetooth Troubleshooting
91
System Reset
93
Liquid Damage
94
Precautions & Warranty
95
I.C. Notice
97
Index
98
Remote Operation Card
100
www.uniden.com
Features
Thank you for purchasing a Uniden Multi-Handset phone. This phone is compatible
with Bluetooth enabled mobile telephones and headsets. The USB connection lets
you use your personal computer to edit your phonebook, download schedule
reminders, and even import contacts from Microsoft Outlook.
Note: Illustrations in this manual are used for explanation purposes. Some
illustrations in this manual may differ from the actual unit.
As an Energy Star Partner, Uniden has determined that this product or product
models meets the Energy Star guidelines for energy efficiency.
Energy Star is a U.S. registered mark.
•
•
•
•
•
•
•
•
•
•
5.8GHz Digital Expandable
Compatible with Bluetooth Enabled Mobile Handsets/Headsets
Integrated Answering Device
Caller ID/Call Waiting Deluxe Options
Customize Handset Profiles Using Personal Computer
100 Phonebook Names (4 Numbers Per Name)
Downloadable Images
Recordable Ringer Tones
Calendar with Schedule Reminder Capability
Battery Backup During Power Failure
Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
BLUETOOTH trademarks are owned by their proprietor and used by Uniden America
Corporation under license.
W el co me / Fe a t u re s /T e rm in o l o g y/ Ac ce s s ib i l i t y [ 2 ]
Welcome/
Uniden is a registered trademark of Uniden America Corporation. AutoStandby,
DirectLink, IntegriSound and Random Code are trademarks of Uniden America.
www.uniden.com
We l co m e/ Fea t u r es /
Ter m i n o l o gy / A c ce s s ib il i t y
Welcome
Portions of this product were created using LEADTOOLS 1991-2002, LEAD Technologies, Inc. ALL RIGHTS
RESERVED.
Terminology
•Standby mode:
•Talk mode:
The handset is not in use. If it is off the cradle, no line has been activated. No dial
tone is present.
A telephone line has been activated on the handset, enabling a dial tone.
Accessibility
Uniden provides a customer service hotline for accessibility questions. If you have a disability and need
customer service assistance or if you have any questions about how Uniden's products can accommodate
persons with disabilities, please call the accessibility voice/TTY line:
1-800-874-9314
A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave us a
message, and we will call you back. Information is also available on our website, www.uniden.com, under
the "Accessibility" link.
[ 3 ] Welc ome/F e atur es/T er m in o logy/A cc essibilit y
www.uniden.com
We l co m e/ Fea t u r es /
NOKIA is a registered trademark of Nokia Corporation. MOTOROLA is a registered trademark of Motorola,
Inc. PLANTRONICS is a registered trademark of Plantronics, Inc. All product or service names are the
property of their respective owners.
Controls & Functions
4
5
11
1
2
6
7
8
9
3
10
12
13
14
15
16
17
18
19
www.uniden.com
21
22
23
24
C o n t ro ls & F un ct i o n s [ 4 ]
C o n t r o l s & F u n ct io n s
20
1.New Message LED
2.Speakerphone Speaker and Ringer
3.Sub LCD
4.Handset Earpiece
5.LCD display
6.Speaker Volume up/down key (P. 59)
7. (phonebook)/ (P. 63 & 21)
8.Talk/flash (P. 48 & 52)
9.Back/hold/int’com (intercom)
(P. 21 & 53 & 85)
10. */tone (P. 60)
11.Soft menu keys (P. 20)
12.
(message)/ (P. 78 & 21)
13.Menu/select (P. 21)
14.Cid (Caller ID) / (P. 70 & 21)
15.Redial/ (P. 56 & 21)
16.End (P. 51)
17.# (P. 71)
18.Handset Microphone
19.Handset Charging Contacts
20.USB jack cover
21.Handset Antenna
22.Headset Jack Cover
23. (speaker phone) (P. 49)
24.Handset Battery Compartment
27
28 29 30 31 32
46 47
33
34
35
36
37
25
38
39
40
41
42
26
43 44
25. Base Charge Contacts
26. Base Speaker
27. Base Antenna
28. Dnd (do not disturb) (P. 80)
29. LCD Display
30. Soft keys (P. 20)
31. Back/hold/int’com (intercom)
(P. 21 & 53 & 85)
32. Phonebook/ key (P. 63 & 22)
[5] Controls & Functions
48
45
33. Speaker Volume up (P. 57)
34. Menu/select (P. 21)
35. Cid (Caller ID)/ (P. 22 & 70)
36. Speaker Volume down (P. 57)
37. End/find hs (P. 51)
38.
(speaker)/flash (P. 50 & 52)
39.
(play/stop) (P. 78)
40. (delete) (P. 78)
41. answer on/off (P. 77)
42. Base Microphone
43. Handset Charge LED
44. */tone (P. 60)
45. # (P. 71)
46. DC IN 9V Jack
47. TEL LINE Jack
48. Base Battery Compartment
www.uniden.com
Setting up the Phone
note
For maximum range:
Choose the best location
When choosing a location for your new phone, here are some important guidelines
you should consider:
•Do not hold the
handset where you
would block the signal.
Correct
Antenna
Incorrect
www.uniden.com
S e t t i n g u p t h e P ho n e [ 6 ]
Setting up the Phone
•Metal and reinforced
concrete may affect
cordless telephone
performance.
• The location should be close to both a phone jack and a continuous power outlet (one
which is not connected to a switch).
• The base and handset should be kept away from sources of electrical noise such as motors,
microwave ovens, and fluorescent lighting.
• For better reception, place the base as high as possible.
• The base should be placed in an open area for optimum range and reception.
• If your home has specially wired alarm equipment connected to phone line, be sure that
installing the system does not disable your alarm equipment. If you have questions about
what will disable alarm equipment, contact your telephone company or a qualified
installer.
note
The battery backup allows you to make and receive calls during a power failure. You
can use any handset or the base, just as you would normally.
Install the backup battery in the base
1) Open the battery case cover by pressing the release button on
the bottom of the base as shown.
2) Plug the battery connector (red and black wires) into the jack
inside the battery compartment. (The connector notches fit into
the grooves of the jack only one way). Match the wire colors to
the polarity label in the battery compartment, connect the
battery and listen for a click to insure connection.
3) Make sure you have a good connection by gently pulling on the
battery wires. If the connection is secure, the battery jack will
remain in place.
4) Place the battery case cover back on the base.
5) Align the tabs on the cover with the grooves on the base, and
press down the cover until it clicks into place.
[ 7 ] S et t i n g u p t h e P h o n e
•
appears in LCD as
a warning that battery
backup pack is NOT
installed in the base
unit.
•To use the Battery
Backup Feature, you
need to connect the AC
adapter to the base
and charge the base
battery at least for 24
hours.
•During initial setup,
the AC Adapter must
be connected to
activate the base unit.
Once activated, you
can make or receive
call using the backup
battery.
•Use only the Uniden
(BT-446) rechargeable
battery pack supplied
with your cordless
telephone.
www.uniden.com
S et t i n g u p t h e P h o n e
Battery Backup Feature
Install the rechargeable battery pack
note
Use only the Uniden
(BT-0002)
rechargeable battery
pack supplied with
your cordless
telephone.
1) Press down on the handset battery case cover (use the finger indention for a better grip)
and slide the cover downward to remove.
2) Place the battery pack in the battery compartment with the connectors on the battery and
on the compartment aligned.
3) Place the battery case cover back on the handset and slide it upwards until it clicks into
place.
S e t t i n g u p t h e P ho n e [ 8 ]
Setting up the Phone
www.uniden.com
Follow the steps below if you need to install a battery.
When the battery pack is very low, the phone is programmed to eliminate functions
in order to save power.
The battery pack needs to be charged when
- The empty battery icon appears.
570#
- L o w B at te r y appears in the display.
If the phone is in standby mode, none of the keys will operate. If
you are on a call, complete your conversation as quickly as
.QY$CVVGT[
possible, and return the handset to the cradle.
.#0&
/1$+.'
Cleaning the battery charging contacts
To maintain a good charge, clean the charging contacts on the handset once a
month. Dampen a cloth with plain water. Gently rub the damp cloth over the
charging contacts until all visible dirt is removed. Dry the contacts thoroughly
before returning the handset to the cradle.
Caution: Do not use paint thinner, benzene,
alcohol, or other chemical products. Doing so
may discolor the surface of the telephone and
damage the finish.
[ 9 ] S et t i n g u p t h e P h o n e
note
•Even when the battery
pack is not being used,
it will gradually
discharge over a long
period of time.
•For optimum
performance, be sure
to return the handset
to the cradle after
each telephone call.
•If the handset is left
off of the base, the
actual talk mode
duration will be
reduced respective to
the amount of time the
handset is off the
cradle.
www.uniden.com
S et t i n g u p t h e P h o n e
Low battery alert
Connect the base and charge the handset
note
•Use only the supplied
AD-0009 AC adapter.
Do not use any other
AC adapter.
•Do not place the power
cord where it creates a
trip hazard or where it
could become chafed
and create a fire or
electrical hazard.
•Don't place the base in
direct sunlight or
subject it to high
temperatures. The
battery may not charge
properly.
1) Connect the AC adapter to the DC IN 9V jack.
Place the base close to the AC outlet to avoid
long extension cords.
2) Connect the AC adapter to a continuous power
supply (i.e., an outlet that is not controlled by a
switch).
3) Close the handset and place it in the base with
the smaller LCD screen facing forward.
4) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see that the AC adapter is plugged in and the
handset makes good contact with the base charging contacts.
5) Charge your handset at least 10 hours before plugging into the phone line.
6) Once the handset battery pack is fully charged,
connect the telephone line cord to the TEL LINE
jack and to a telephone outlet.
www.uniden.com
Setting up the Phone [ 1 0 ]
Setting up the Phone
If your telephone
outlet isn't modular,
contact your
telephone company.
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Snap the wall mount adapter into the notches
on the base top.
!
DO NOT use an AC
outlet controlled by a
wall switch.
2) Plug the AC adapter into the DC IN 9V jack.
3) Wrap the AC adapter cord inside the molded
wiring channel as shown.
4) Plug the AC adapter into a standard 120V AC
wall outlet.
5) Plug the telephone line cord into the TEL LINE
jack.
Wrap the cord inside the molded wiring channel
as shown.
6) Plug the telephone line cord into the telephone
outlet.
7) Align the mounting slots on the base with the
mounting posts on the wall. Then push in and
down until the phone is firmly seated.
[ 1 1 ] M ou n t in g t h e B a s e U ni t o n a W a l l
www.uniden.com
M o unt in g th e B a s e Un it o n a
Mounting the Base Unit on a Wall
note
•Advanced features may
not be supported by
older handsets.
•If you have any trouble
with your phone, visit
our web site at
www.uniden.com or call
our Customer Hotline
(see back cover page).
Your phone can support a total of
ten handsets. Expansion handsets
do not need to be connected to a
phone jack. Expansion handsets
allow you to use additional features
such as DirectLink Mode and up to
5-way conference calling. Expansion
handsets need to be registered to
the base before they will operate.
10 Handsets
....
Backwards/Forwards Compatibility
Your phone is compatible with other Uniden 5.8GHz Digital
Expandable Handsets. Compatible models include the TCX860
and ELX500. (please check www.uniden.com for an updated list
of expansion handset compatible with this series.)
www.uniden.com
E x pa ndi n g Y ou r Ph o ne [ 1 2 ]
Expanding Your Phone
Expanding Your Phone
The handset is powered by a rechargeable
battery pack. The battery recharges
automatically when the handset is placed
in the charger.
note
•Use only the supplied
AD-0005 AC adapter.
Do not use any other
AC adapter.
1) Connect the AC adapter to the DC IN 9V jack
and to a standard 120V AC wall outlet.
2) Set the charger on a desk or tabletop, and
place the handset in the charger with the
Sub-LCD screen facing forward.
3) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see
that the AC adapter is plugged in and the
handset makes good contact with the
charger charging contacts.
4) Charge the handset battery pack for at least
10 hours before using your new cordless
telephone for the first time.
Register the Handset
Handsets supplied with the phone are registered to the base by the factory. Preregistered handset display a handset ID number. Handsets that have not been
registered display M U ST pl a ce ha n ds et i n b a se to r eg is t er ! Mo de ls m ay v ar y, r ef er
t o Ow n er s M a nu a l f or h el p. in the LCD. and H a nd se t mu s t b e r e gi st e re d in the sub
LCD. When you register an extra handset to the base, the handset ID will be
assigned. Only one handset can be registered at a time.
[ 1 3 ] E x pa nd in g Y ou r P ho n e
•Your phone maybe
compatible with other
Uniden 5.8Ghz Digital
Expandable Systems.
Look for the technology
icon on our boxes or
visit our website for a
list of compatible
models.
www.uniden.com
E x p a n d i ng Yo u r P ho n e
Connect the expansion handset's charger
Before the expansion handset is registered, the battery pack MUST be charged for 10
hours.
To register an ELX500 handset, simply place it in the main base.
To register a TCX860 handset, follow the steps below:
1) From the base, press menu/select and select
S e tu p menu.
2) Select
R eg i st e r Ha n ds e t ,
S ys te m
5[UVGO5GVWR
/'55#)' $NWGVQQVJ
and press menu/select.
3) On the handset, press and hold # until you hear a
beep.
0
4GIKUVGT*CPFUGV
5'.'%6
While the handset is registering, Ha n ds et R eg is t er i ng will appear in the LCD. When
Reg istration complete. is displayed, the handset has been registered to the base. If
R e gi s tr at i on fa i le d. appears, please try these steps again.
www.uniden.com
E x pa ndi n g Y ou r Ph o ne [ 1 4 ]
Expanding Your Phone
Register expansion handsets to the main base
note
The digital security code is an identification code used to connect the handset and
the base unit. Normally, setting the code is not necessary. In the rare situation that
you suspect another cordless telephone is using the same security code, you can
change the code. To change the digital security code:
1. De-register all the handsets you have (see page 93).
2. Re-register each handset by following the steps on page 14.
Installing the Holster
- Line up the groove on the back of the handset with the groove on
the holster. The handset fits in the holster only one way.
- Slide the phone into the holster.
- Use the spring clip to attach the holster to your belt or pocket.
[ 1 5 ] C h a ng i ng t h e D i g it a l S e c ur it y C od e
You must remove the
holster to charge the
handset.
www.uniden.com
C h a n gi n g t h e D ig i t a l
Changing the Digital Security Code
Optional Headset Installation
note
To use with a
Bluetooth® headset,
see page 44.
Your phone may be used with an optional headset
To use an optional headset, insert the headset plug into
the headset jack. Your phone is ready for hands-free
conversations. Headsets may be purchased by calling
Uniden's Parts Department (see back cover page).
O p t i o n a l H e ad s et
Ins t al l a t i o n
www.uniden.com
O p t io n a l H e ad se t In s t a l l a t i o n [ 1 6 ]
This phone includes Uniden's Cordless Telephone Customization Tool for your Windows
PC. You can use this software application to completely configure your phone,
download pictures for wallpaper, and import contacts from Microsoft® Outlook®.
NOTE: Uniden's Cordless Telephone Customization Tool application requires
Microsoft®, Windows® 98SE, Windows ME, Windows 2000, Windows XP and more
than 150MB free hard drive space.
1) Insert the Cordless Telephone
Customization Tool CD into your
computer's CD-ROM drive. The
installation application should start
automatically.
2) If the application doesn't start, go to
To PC
the Start menu and select Run.
To the
USB jack
3) In the window, type d:\autorun.exe
(where d is the letter assigned to your
CD-ROM drive), and click OK.
4) Once the software is installed, connect
the USB cable to the handset and your
PC as shown.
5) Customize your Uniden Cordless Handset.
For complete instructions on using Uniden's Cordless Telephone Customization Tool,
see the help file on the CD-ROM.
[ 1 7 ] I n s t al li ng U ni de n 's C o rdl e s s T e l e p h o n e C u st o m i z a t i o n T oo l
www.uniden.com
I n s t a ll i n g U n i d e n ' s C o r d l e s s
Installing Uniden's Cordless Telephone
Customization Tool
Using the Interface
Example of the standby mode display
• Handset
• Sub-LCD
Battery icon
570#
Date, Day of the week, and time
0GY%+&
Number of new caller ID calls received
.#0&
#
0GY%+&
Date, Day of the week, and time/
Battery icon
Number of new caller ID calls received.
/1$+.'
• Base
/'55#)'
0
570#
0GY%+&
.#0&
Day of the week and time
Number of new caller ID calls received
/1$+.'
Number of message
Status if your answering machine
appears if you have a new message.
appears if you set your answering system to announce only.
www.uniden.com
U s in g t he In t e rfa ce [ 1 8 ]
Using the Interface
appears when the message storage is full.
Display Icons
ICON
Handset
Sub-LCD
DESCRIPTION
Base
-
Battery icons indicate the handset battery status. This icon cycles
depending on the battery status (empty, low, medium, and full).
Ringer off icon indicates that ringer is turned off.
LAND line icon indicates that the land line is in use.
MOBILE line icon indicates that the mobile line is in use.
Bluetooth icon appears when you are using bluetooth features.
-
Mute icon appears when you mute the handset or the base.
-
-
Speaker icon appears when the handset speaker phone is used.
-
When a new message is received, an envelope icon is displayed
on the LCD screen
Privacy icon appears when the Privacy Mode is turned on.
Call record icon appears while recording a conversation.
[19] Using the Interface
www.uniden.com
Soft Key Function
"Soft" keys are keys that change function during the operation of the phone. There are two soft keys on
the handset and base.
The text right above the soft key indicates that key's current function. For example, when the phone is in
standby mode, pressing soft key 1 activates the LAND line. When the phone is in talk mode, pressing soft
key 1 brings up the options menu. Complete information on the features controlled by the soft keys can
be found under each feature.
In standby mode
In talk mode
Handset
6CNM
570#
8QNWOG
0GY%+&
.#0&
Soft key 1
/1$+.'
126+105
Soft key 2
Soft key 1
/1$+.'
Soft key 2
/'55#)'
0
570#
.#0&
Soft key 1
/1$+.'
Soft key 2
www.uniden.com
522JQPG
/'55#)'
0
8QNWOG
126+105
Soft key 1
/1$+.'
Soft key 2
U s in g t he In t e rfa ce [ 2 0 ]
Using the Interface
Base
To make menu selections, please follow the instructions below:
Press menu/select.
Highlight the option you want by pressing the up, down, right, or left key on the
handset, or up or down key on the base. This will move the cursor; the option
currently highlighted appears in reversed out text.
Select the highlighted option by pressing the menu/select key.
To exit the menu and return to standby, press the end key on the handset or the end/
find hs key on the base.
To go back a level in the menu, press the back/hold/int’com.
5RGCMGT5GVWR
5'.'%6
[21] Using the Interface
www.uniden.com
Entering text
You can use the number keypad on your
phone to enter text by referring to the
letters printed on each number key.
When you press the number key in a text
entry field, the phone displays the first
letter printed on the number key. Press
the number key twice to display the
second letter and three times to display
the third. Capital letters are displayed
first, then lower case letters, then the
number on the key.
If two letters in a row use the same
number key, enter the first letter, then
use the right and left key to move the
cursor to the next position to enter the
second letter.
For example, to enter Movies:
Press 6 once to enter M.
Use right or left key to move the cursor to the right.
Press 6 six times to enter o.
Press 8 six times to enter v.
Press 4 six times to enter i.
Press 3 five times to enter e.
Press 7 eight times to enter s.
Press menu/select to end your text entry.
If you make a mistake while entering a name, use right or left key to move the cursor to the incorrect character.
Press the DELETE soft key to erase the incorrect character, and then enter the correct character.
To delete all characters in the text entry field, press and hold the DELETE soft key.
www.uniden.com
U s in g t he In t e rfa ce [ 2 2 ]
Using the Interface
1)
2)
3)
4)
5)
6)
7)
8)
Main Menu Options
On the handset, the options are DirectLink, Room Monitor, Messages, Reminder,
Speaker Setup, Display Options, Ringer Options, System Setup and Bluetooth.
5RGCMGT5GVWR
Note:
• If you do not press a key within 30 seconds, the phone will time out and exit the menu mode. When setting
Date and Time, the time-out period is extended to two minutes.
• All of these options can be configured in the Cordless Customization Application.
Handset Main Menu Options
5'.'%6
Direct Link
Room Monitor
Messages
Ringer Options
Speaker Setup
Display Options
Reminder
System Setup
Bluetooth
On the base, the options are Rings/Volumes, Caller ID, Redial, Phonebook, Room
Monitor, Record Memo, System Setup, and Reconnect
.
[23] Main Menu Options
1RVKQPU
/'55#)' 4KPIU8QNWOGU
0
%CNNGT+&
5'.'%6
www.uniden.com
note
Through this section we
use handset display
images for explanation.
System Setup
5[UVGO5GVWR
The following submenu options must be set separately for each
handset and the base.
Handset/Base
Mobile Priority
(System Setup)
Handset
(Base)
Mobile
Priority
5'.'%6
Mobile Priority allows you to set a default mobile phone for the
base and each handset. The priority mobile phone is automatically used when you
press the MOBILE soft key to make a call.
If you select a priority mobile phone, the handset or base will ring when the
priority mobile receives a call. If the non-priority mobile phone receives a call, the
handset or base displays in co m in g c a ll , but it will not ring. If you want a handset
or base to ring when any paired mobile phone receives a call, set the mobile
priority to Al l .
The handset and base will still ring when a land line call is received.
To set the mobile priority, go to M o bi l e P ri o ri ty, and select a
mobile or A l l from the list. A confirmation tone tells you that
the setting is active.
/QDKNG2TKQTKV[
#NN
/QOU%GNN
,CPG
5'.'%6
www.uniden.com
S ys t em Se t up M e n u [ 2 4 ]
S y s tem S etu p M e nu
System Setup Menu
You can change the contrast of your base display to make
.%&%QPVTCUV
/'55#)' it easier to read. You might want to adjust the contrast
whenever you change the display color. Your phone gives
5'.'%6
you 10 levels of contrast to choose from. To adjust the
contrast, go to L CD C o nt r as t . Use up or right key to
increase the contrast and down or left key to decrease the contrast. When you like
the level of contrast, press menu/select to select it.
0
Open to Answer (Handset only)
Open to Answer lets you answer the phone by opening the cover
of the handset. To turn on Open to Answer, go to Ope n t o An swe r
and select O n . A confirmation tone tells you that Open to
Answer is active.
1RGPVQ#PUYGT
1P
(System Setup)
Handset
(Base)
LCD
Contrast
Open to
Answer
1HH
5'.'%6
Any Key Answer (Handset only)
Any Key Answer lets you answer the phone by pressing any key
on the number pad. To turn on Any Key Answer, go to An y K e y
A ns w er and select On . A confirmation tone tells you that Any Key
Answer is active.
#P[-G[#PUYGT
1P
Any Key
Answer
1HH
5'.'%6
[ 2 5 ] S ys t em Se t up M e n u
www.uniden.com
S y s tem S etu p M e nu
LCD Contrast (For Base)
(System Setup)
Handset
(Base)
Banner
Display
Key Touch
Tone
You can change the name your phone displays on the screen. If
you have more than one handset, you can use the banner name
to identify your handset during handset-to-handset functions
like intercom and DirectLink. Go to Banner Dis play and enter the
name you want to use. You can use up to 10 characters. Use the
DELETE soft key to delete an existing handset name. Press
menu/select when you're finished.
$CPPGT&KURNC[
/QOU2JQP
&'.'6'
Key Touch Tone
Key Touch Tone is the tone your keypad makes when keys are
pressed.
-G[6QWEJ6QPG
1P
1HH
To turn off the tone, go to K e y T ou c h T on e and select O ff . A
confirmation tone tells you that the tone has been deactivated.
5'.'%6
Call
Privacy
www.uniden.com
Call Privacy
If you don't want other registered handsets and the base to
interrupt you on a call, you can turn on privacy mode. As long
as your handset or the base is in privacy mode, other handsets
won't be able to join your call or make any calls of their own. To
turn on privacy mode, go to Cal l Priva cy and select On. You can
turn on privacy mode when the phone is in standby or when
you're already on a call. You will hear a confirmation tone.
%CNN2TKXCE[
1P
1HH
5'.'%6
S ys t em Se t up M e n u [ 2 6 ]
S y s tem S etu p M e nu
Banner Display (Handset only)
.CPIWCIG
/'55#)' 'PINKUJ
0
(System Setup)
(TCPECKU
5'.'%6
Language
Unique ID (Handset only)
You can assign special ringer tones to anyone in your
phonebook. When your phone gets a call, it looks up the Caller
ID information in your phonebook; if you've assigned a
distinctive ringer and pictures to that number, the phone uses it
so you know who's calling. To turn on distinctive ringing, go to
U n iq u e I D and select On . A confirmation tone tells you that
distinctive ringing is active.
Handset
(Base)
7PKSWG+&
Unique ID
1P
1HH
5'.'%6
When viewing a Caller ID entry, the picture that corresponds to the
Phonebook Unique ID setting appears. If the Unique ID is set to Off, the
phone uses default picture for viewing Caller ID entries.
[ 2 7 ] S ys t em Se t up M e n u
www.uniden.com
S y s tem S etu p M e nu
Language (For Base)
You can change the language the menu display will use.
Choose from English, French, or Spanish. To change the
language, go to L a ng u ag e and select E ng l is h , Fr a n ユais
(French), or E sp aツ ol (Spanish). You'll hear a confirmation
tone, and the display will use the selected language.
note
Some feature may not
supported by older
handset.
Global settings apply to registered handsets and the base. If
you change something under the global menu, you change it for
all handsets and the base. Only one handset or the base can
change global settings at a time, and you have to make sure the
phone is not currently being used.
5[UVGO5GVWR
5'.'%6
(System Setup)
Global
Date &
Time
Date and Time
To change the date and time shown in the display, go to Da te &
T i me . Use the up, down, right, left keys to highlight the part you
want to change (date, time, AM/PM). Use the number keypad or
*/tone to change each part. Press menu/select when you're
finished.
Note: If you don't press any keys for two minutes when setting the date and time,
the phone will exit the menu mode.
www.uniden.com
&CVG6KOG
2/
#/2/
S ys t em Se t up M e n u [ 2 8 ]
S y s tem S etu p M e nu
Global Setup
To let your phone support these features, go to C al l W ai t in g .
Select O n , and the phone will display the CallWaitDeluxe screen.
Select O n . (You have to turn on Call Waiting before you can turn
on Call Waiting Deluxe.) A confirmation tone tells you that your
phone is ready to use these features.
You can't turn off Call Waiting on your mobile line. To
disable Call Waiting on your mobile phone, refer to the
documentation provided with your mobile phone.
Global
Call
Waiting
%CNN9CKVKPI
1P
1HH
5'.'%6
Area Code
If you can make a call by dialing only 7 digits (instead of 10), you can program your
local area code in your phone. If you get a call from within your area code, you'll
only see the 7-digit phone number. If you get a call from outside your area code,
you'll see all 10 digits.
To enter an area code, go to A re a C od e . Use the number keypad
to enter your 3-digit area code. Press menu/select when you're
finished.
(System Setup)
Area Code
#TGC%QFG
&'.'6'
[ 2 9 ] S ys t em Se t up M e n u
www.uniden.com
S y s tem S etu p M e nu
Call Waiting
Your phone supports Caller ID on Call Waiting, so you can see the name and number of
someone who calls when you're already on the line. Your phone also supports Call
Waiting Deluxe, which gives you a choice of how you want to handle a waiting call. You'll
need to subscribe to these features with your phone company before you can use them.
Global
Dial Mode
If your phone company uses P u ls e dialing, you'll need to change
your phone's dial mode. There's an easy way to tell: try making a
call. If your call connects, your phone's setting is fine. If not, go
to D ia l M o de and select P u ls e . A confirmation tone tells you
you've changed the dial mode, and you can try making a call
again.
&KCN/QFG
6QPG
2WNUG
5'.'%6
Setting the Ringer Options
(Ringer Options)
(Base:Rings/Volumes)
Ringer Tones
www.uniden.com
4KPIGT1RVKQPU
This menu lets you customize the Ringer or Speaker Volume
settings in your phone. You can set these options separately for
each handset and the base.
Ringer Tone
5'.'%6
You can set a different ringer for each handset and the base.
This phone comes with 10 prerecorded songs and 15 different ringer tones; for the
handset you can also record your own ringer tones (see page 33).
S ys t em Se t up M e n u [ 3 0 ]
S y s tem S etu p M e nu
(System Setup)
Dial Mode
Your phone can communicate with the telephone network in two different ways: tone
dialing and pulse dialing. These days, most phone networks use a method called tone
dialing, so your phone comes programmed for tone dialing.
1) Go to Ri n ge r T on e s .
2) Select the tel type, Land or Mobile.
3) Select a ringer from the list.
As you scroll through the list, each ringer will sound. You'll hear
a confirmation tone, and the phone will go back to the menu.
.CPFQT/QDKNG!
(NKEMGT
'NKUG
/GTT[:OCU
5'.'%6
[ 3 1 ] S ys t em Se t up M e n u
www.uniden.com
S y s tem S etu p M e nu
- Songs: Beethoven's Symphony #9 [Beethoven9], For Elise [Elise], Home Sweet Home [Hm
Swt Hm], Lorri Song #6 [Lorri Song], WT Overture (Handset only), Twinkle Star (Handset
only), Je Te Veux (Handset only) When the Irish Eyes Are Smiling [Irish Eyes] (Base
only), Aura Lee (Base only), Let Me Call You Sweet Heart [Sweetheart] (Base only), Star
Spangled Banner [Star Spngl], Old MacDonald [Old MacDld], We Wish You A Merry
Christmas [Merry-Xmas]
- Ringer tones: Flicker, Clatter, Coin Toss, Synthesize, Finish Line, Soft Alert, Wake Up,
Lighting Bug, Bebop, Tone Board, Chirp, Party Clap, Reminder, Burble, TeleTone
(Ringer Options)
(Base:Rings/Volumes)
Unique Ring
You can assign special ringer tones to anyone in your
phonebook. When your phone gets a call, it looks up the
Caller ID information in your phonebook; if you've
assigned a distinctive ringer to that number, the phone
uses it so you know who's calling.
To turn on distinctive ringing, go to U ni q ue
tells you that Unique Ring is active.
Vibrate All
Ri n g
and select
7PKSWG4KPI
/'55#)' 1P
0
On.
1HH
5'.'%6
A confirmation tone
Vibrate All (Handset Only)
The vibrate alert causes the handset to vibrate when an
incoming call is received. For safety reasons, the handset will
not vibrate while it is charging in base. To turn on the Vibrate
Alert, go to Vi br a te Al l and select O n . A confirmation tone tells
you that Vibrate Alert is active.
8KDTCVG#NN
1P
1HH
5'.'%6
www.uniden.com
S ys t em Se t up M e n u [ 3 2 ]
S y s tem S etu p M e nu
Unique Ring (Base Only)
You can choose one of four different vibrate patterns. To set Call Vibrate, go to Ca ll
V i br a te and select Tel Type (LAND or MOBILE), and then select the pattern.
Selecting OFF will turn off the vibrate feature for incoming calls only. A
confirmation tone tells you that Vibrate Pattern is active.
Customize Your Own Distinctive Ringer Tones (Handset Only)
Your phone can store up to 5 different
recordings to use as ringer tones (a total of
100 seconds). Each recording must be less
than 20 seconds long.
To the
headset jack
(Ringer Options)
Call Vibrate
Rec/Edit
Rings
To the
sound source
Storing Ringer Tones
1) Connect the audio recording cable to the handset and sound source (e.g.stereo
or CD player). Insert one end of the audio recording cable into the handset's
headset jack and the other end into the sound source.
You can also simply use the handset's microphone by holding the handset close
to the sound source.
[ 3 3 ] S ys t em Se t up M e n u
www.uniden.com
S y s tem S etu p M e nu
Call Vibrate (Handset Only)
Playing the Ringer
1) Go to Re c/ E di t R i ng s .
2) Select a ringer to play, and press the OPTIONS soft key.
3) Use the up/down key to select P la y. To stop, press menu/select
or the STOP soft key.
1RVKQPU
2NC[
%JCPIG6KVNG
&GNGVG
5'.'%6
Change Ringer Name
1) Go to Re c/ E di t R i ng s .
2) Select a ringer you want to change the title, and press the
OPTIONS soft key.
3) Use the up/down key to select C h an g e Ti t le .
4) Edit the title of this ringer (up to 12 characters) using the
number keypad, the DELETE soft key, right, or left key.
When you are finished, press menu/select, you will hear a
confirmation tone, and Do n e! appears.
www.uniden.com
'PVGT6KVNG
1DNCFK
&'.'6'
S ys t em Se t up M e n u [ 3 4 ]
S y s tem S etu p M e nu
2) Go to Re c/ E di t R i ng s .
4GEQTF4KPIGT
9CKVKPIVQ
3) Select a location from 1-5, and press the OPTIONS soft key.
4GEQTF
4) Use the up/down key to select R e co r d . To start recording,
press the RECORD soft key. The message counter displays 2 0
and then begins to count down.
5) When you are finished recording, press the STOP soft key. The
phone will play the recorded ringer. To re-record the ringer, press
4'%14&
the ReRec soft key while playing the ringer.
6) Enter the title of this ringer (up to 12 digits) using the number
keypad, or the DELETE soft key, right, or left key.
7) Press menu/select, you will hear a confirmation tone, and D o ne ! appears.
You can not delete the ringer if it's currently being used
for the default ringer tone, a Unique Ring setting, or a
Reminder.
S y s tem S etu p M e nu
Deleting the Ringer
To delete a ringer tone, go to R ec / Ed it Ri n gs , and select the
ringer you want to delete. Press OPTIONS soft key. Use the up/
down key to select De l et e. Select Y es . You will hear a
confirmation tone, and De l et e d! appears. The ringer is deleted
from the list, and the phone stays on the ringer list.
1RVKQPU
2NC[
%JCPIG6KVNG
&GNGVG
5'.'%6
Display Settings (Handset Only)
The following submenu options must be set separately for each
handset.
[ 3 5 ] S ys t em Se t up M e n u
(DisplayOptions)
5'.'%6
Wallpaper/Image Displays (Handset Only)
Your phone has 34 preset wallpaper/images
to choose from. You can customize or
replace 30 of these images using the
software application CD-ROM supplied with
this phone.
During standby mode the wallpaper will
display on the handset's LCD Screen. To set
your wallpaper, scroll through the Wall
&KURNC[1RVKQPU
Wall Paper
9CNN2CRGT
0Q5GNGEVKQP
7PKFGP.QIQ
#PCNQI%NQEM
&KIKVCN%NQEM
%CNGPFGT
EJGEMGTHNCI
8+'9
5'.'%6
www.uniden.com
(DisplayOptions)
Color Scheme
LCD Contrast
Note: You can download images using the PC application CD-ROM and use them for your
wallpaper.
Color Scheme (Handset Only)
You can change the color of your phone's display. There are 5
different colors to choose from: Sky Blue, Haze Gray, Chic
Purple, Coral Red, and Lime Green.
To change the color of the display, go to Color Schem e and select
the color you want. As you scroll through the options, the phone
displays the highlighted color for you.
%QNQT5EJGOG
5M[$NWG
*C\G)TC[
%JKE2WTRNG
%QTCN4GF
.KOG)TGGP
5'.'%6
LCD Contrast (for the Handset)
LCD Contrast adjusts the handset's display. To adjust the
contrast, go to LC D Co nt ra st and use the up, down, right, or left
key to adjust the contrast level you want. Press menu/select to
activate it. You will hear a confirmation tone.
.%&%QPVTCEV
5'.'%6
www.uniden.com
S ys t em Se t up M e n u [ 3 6 ]
S y s tem S etu p M e nu
Paper options, and press the VIEW soft key. Press menu/select to activate the
wallpaper of your choice.
(DisplayOptions)
Animation Type
delete
done
page
talk
batt-low
To set your animation type, scroll through Animation Type
options, and press the VIEW soft key. Press menu/select to
activate the animation type of your choice.
end
unavailable
#PKOCVKQP6[RG
0Q5GNGEVKQP
&QI
%CT
(TQI
#DUVTCEV
8+'9
Language (for the Handset)
You can change the language the menu display will use. Choose
from English, French, or Spanish. To change the language, go to
L a ng u ag e and select E ng l is h , F ra n ユais (French), or E sp a ツ o l
(Spanish). You'll hear a confirmation tone, and the display will
use the selected language.
5'.'%6
.CPIWCIG
'PINKUJ
Language
(TCP㩟CKU
'URC㩌QN
5'.'%6
[ 3 7 ] S ys t em Se t up M e n u
www.uniden.com
S y s tem S etu p M e nu
Animation Type (Handset only)
Your phone has 4 different system animations (Dog, Car, Frog and Abstract) with 7
different animation schemes:
Using the Bluetooth Feature
note
•If no Bluetooth phone
with Bluetooth Device
was found, Bluetooth
Device was not
found. appears.
Your phone can pair with Bluetooth v 1.1 compliant mobile phones so you can use
your mobile line in addition to the usual land line. This lets you answer your mobile
phone from any of your home phone handsets or use any free long distance minutes
from your mobile plan on your home phone. You only have to pair your mobile
phone to the base once. The base can support two paired Bluetooth devices.
Only one mobile line can make or receive a call at a time.
The phone provides two different ways of pairing: Search Device and Find Me. Check
your mobile phone's owner's manual to decide which method is best for your mobile.
a. Search Device
1) Activate the Bluetooth option on your mobile phone according to the owner's
manual.
2) With the ELBT595 in standby mode (not in use), press
5[UVGO5GVWR
/'55#)' )NQDCN
menu/select on the base.
$NWGVQQVJ
3) Use the up/down key to scroll through options and
select Sy s te m S et u p .
5'.'%6
4) Use the up/down key to scroll through S ys t em Se t up
5GNGEV/QDKNG
and select B l ue to o th .
/'55#)' 'ORV[
Mo bi l e .
5) Select S el e ct
'ORV[
6) Select an empty slot and press the OPTIONS soft key.
126+105
0
0
www.uniden.com
U s in g t h e B lue t o o t h F ea t u re [ 3 8 ]
Using the Bluetooth Feature
•To cancel searching,
press the STOP soft
key.
Registering a Mobile Phone to the Main Base Unit
To cancel the search, press the stop soft key. If no
device is found, B lu e to ot h D e vi c e w as n o t f ou n d
appears.
8) Use the up/down key to select a device to connect,
and then press menu/select.
9) Scroll to the mobile phone you want to pair with the
ELBT595, and press the CONNECT softkey.
10)Using the mobile phone, enter the PIN code "0000."
Us i n g t h e B l u e t o o t h Fe at u r e
7) Select S ea r ch
De v ic e . The phone will search for
Bluetooth mobile phones and display the first six
mobile phones found.
1RVKQPU
/'55#)' 5GCTEJ&GXKEG
0
(KPF/G
5'.'%6
2CKTYKVJ
/'55#)' /16141.#8
0QMKC
0
%100'%6
'PVGT2KP%QFG
/'55#)' HQT2CKTKPI
0
2+0
When pairing is completed, you will hear a confirmation
tone, and P ai r in g s uc c es f ul ! appears on the base. If pairing failed,
f a il e d. Tr y a ga i n appears.
Pa i ri n g
b. Pair/Find Me
1) Follow the step 2) - 6) under "a. Search Device. " on page 38.
2) Select F in d M e .
3) On your mobile phone, perform Search Device and select "Uniden ELBT 595."
4) On the mobile, enter the pin code "0000". C o nn e ct in g appears on the base unit
display.
When pairing is completed successfully, you will hear a confirmation tone, and
P a ir i ng su cc e sf u l! appears on the base. If pairing failed, P ai r in g f ai l ed . T r y
a g ai n . appears.
[ 3 9 ] U s in g t h e B lue t o o t h F e at u re
www.uniden.com
De-registering the Mobile Phone
note
5) Use the up/down key to select D e re g is te r
or
D e re gi s te r A l l
to de-register all, and then press
menu/select.
6) Use the up/down key to select
menu/select.
Y e s,
and then press
0
126+105
1RVKQPU
/'55#)'
0
'FKV0COG
&GTGIKUVGT
5'.'%6
When the de-registration is complete, you will hear a confirmation tone, and
D e re g is tr a ti o n s uc ce s sf u l! appears.
www.uniden.com
U s in g t h e B lue t o o t h F ea t u re [ 4 0 ]
Using the Bluetooth Feature
If you de-register the
priority mobile
phone, go to the
Mobile Priority menu
and select a different
mobile phone (see
page 24).
1) When the phone is in standby mode, press menu/select on the base.
2) Select S ys t em Se tu p menu, and then
B l ue to o th .
3) Use the up/down key to select S e le c t
Mo b il e , and then press menu/select.
4) To delete individual Mobile phone, use the up/down
5GNGEV/QDKNG
/'55#)' /16141.#8
key to select a Mobile phone to be de-registered and
0QMKC
press the OPTIONS soft key.
You can store and edit names of registered Mobile phones.
1) When the phone is in standby mode, press menu/select
on the base.
2) Select S ys t em Se t up menu, and then select
B l ue t oo t h .
3) Use the up/down key to select S e le c t
M ob i le , and
then press menu/select.
4) Use the up/down key to select a Mobile phone to edit
the name, and press the OPTIONS soft key.
5) Use the up/down key to select E d it Na m e and then
press menu/select.
5GNGEV/QDKNG
/'55#)' /16141.#8
0
0QMKC
126+105
1RVKQPU
/'55#)' 'FKV0COG
0
&GTGIKUVGT
5'.'%6
6) Enter or edit the name using the number keypad, the
DELETE soft key, and right and left key.
7) When you are finished, press menu/select. You will hear
a confirmation tone, and Do n e! appears.
[ 4 1 ] U s in g t h e B lue t o o t h F e at u re
www.uniden.com
Us i n g t h e B l u e t o o t h Fe at u r e
Editing the Mobile Name
Setting the Mobile Ring Tone (Base Only)
note
If you turn on the
mobile ringer, the
unique ringer feature
will be disabled.
This feature allows the phone to use the ringer of the mobile phone when receiving
a call to the mobile phone.
1) When the phone is in standby mode, press menu/select
/QDKNG4KPI6QPG
/'55#)' 1P
on the base.
1HH
B l ue to o th .
2) Select S ys t em Se tu p menu, and then
5'.'%6
3) Use the up/down key to select M o bi l e Ri n g T on e , and
then press menu/select.
#TG[QWUWTG!
4) Use the up/down key to select on or off, and then
/'55#)' QXGTTKFGUCP[
press menu/select.
7PKSWG4KPIGTU
5) Press the YES or NO soft key.
01
;'5
0
Viewing Bluetooth Properties of the Base
To see property of the base, follow the steps below:
1) When the phone is in standby mode, press menu/select
7PKFGP'.$6
/'55#)' &(((
on the base.
2+0
B l ue to o th .
2) Select S ys t em Se tu p menu, and then
3) Use the up/down key to select M y B as e U ni t , and then
press menu/select.
The phone displays the property of the base.
To go back to the Bluetooth setup Menu, press back/hold/int’com.
0
www.uniden.com
U s in g t h e B lue t o o t h F ea t u re [ 4 2 ]
Using the Bluetooth Feature
0
Us i n g t h e B l u e t o o t h Fe at u r e
Auto Reconnect
If you set this feature to on, the phone will search for the paired mobiles once
every minute.
1) When the phone is in standby mode, press menu/
#WVQ4GEQPPGEV
/'55#)' 1P
select on the base.
1HH
2) Select Sy s te m S e tu p menu, and then
B lu e to ot h .
5'.'%6
3) Use the up/down key to select A ut o Re co n ne c t , and
then press menu/select.
4) Use the up/down key to select O n or O ff , and then press menu/select.
0
Reconnect Mobile
This feature allows the phone to reconnect to a paired
mobile.
1) When the phone is in standby mode, press menu/
select on the base.
2) Select Re c on n ec t , and then press menu/select.
C o nn e ct i ng will appear.
When the connection is complete, * appears next to
the name of the device connected.
[ 4 3 ] U s in g t h e B lue t o o t h F e at u re
1RVKQPU
/'55#)' 5[UVGO5GVWR
0
4GEQPPGEV
5'.'%6
%QPPGEVKPI
/'55#)'
0
www.uniden.com
Using Bluetooth Headset (Handset Only)
note
•Even if the handset
ringer is turned off or
if DND mode is turned
on, a paired Bluetooth
headset will still ring.
•If no device is
detected, Bluetooth
Device was not
found . appears, and
the phone goes back to
the Bluetooth setup
menu.
Before you can use a bluetooth headset, you must pair it with the phone. Once you
have paired your headset with the phone, you do not have to pair it again until you
want to use it with another phone.
Registering the bluetooth headset
1) Prepare your bluetooth headset for pairing according to the
headset's owner's manual on pairing.
2) With the phone in standby mode (not in use), press menu/
select on the handset.
3) Select the Bluetooth icon on the handset's main menu
display.
4) Use the up/down key to select F i nd / Pa ir , and then press
menu/select.
$NWGVQQVJ
(KPF2CKT
/[*CPFUGV
5'.'%6
(KPF&GXKEG
The ELBT595 will begin to search for a bluetooth device.
Once detected, the headset's name will appear in the handset's
display.
Press the STOP soft key to back to show the list of the bluetooth
headsets.
www.uniden.com
(QWPF
5612
U s in g t h e B lue t o o t h F ea t u re [ 4 4 ]
Using the Bluetooth Feature
•The Bluetooth
headsets must stay
within 15 feet (5m)
range of the cordless
handset.
The phone also supports Bluetooth v 1.1 compliant headsets. Please visit our web
site for more detailed information about Bluetooth compatibility and
troubleshooting tips.
When pairing is completed, you will hear a confirmation tone,
and P ai r in g s uc c es s fu l! appears on the handset. If pairing
failed, P ai r in g f a il e d. T r y a ga i n. appears.
Us i n g t h e B l u e t o o t h Fe at u r e
5) Scroll to a headset you want to pair with the ELBT595
handset, and press the SELECT soft key.
6) Using the cordless handset, enter your headset's PIN code.
7) Press the CONNECT soft key.
2CKTYKVJ
/QVQNQTC*5
2NCPVTQPKEU/
#$
5'.'%6
2CKTYKVJ
/QVQNQTC*5
2KP%QFG
%100'%6
Viewing Paired Headsets
To review headsets paired to this cordless handset, follow the steps below:
1) When the phone is in standby mode, press menu/select on the handset.
2) Select the Bluetooth icon.
3) Use the up/down key to select H ea d se t , and then press menu/select.
The headset name and serial number are displayed.
To go back to the Bluetooth setting display, press back/hold/int'com.
[ 4 5 ] U s in g t h e B lue t o o t h F e at u re
www.uniden.com
Viewing Bluetooth Properties of the Handset
To view the handset information, follow the following steps:
1) When the phone is in standby mode, press menu/select on the handset.
2) Select the Bluetooth icon.
3) Use the up/down key to select M y H a nd se t , and then press menu/select. The
handset name and serial number are displayed.
Turning Bluetooth ON or OFF
The Bluetooth connection still uses power even when you're not currently using a
Bluetooth device. To save power, you can turn off the Bluetooth connection when
it's not in use.
1) When the phone is in standby mode, press menu/select on the
$NWGVQQVJ
1P1HH
handset.
*GCFUGV
2) Select the Bluetooth icon.
/[*CPFUGV
3) Use the up/down key to select O n/ O ff , and then press
menu/select.
4) Use the up/down key to select O n or O f f , and then press
10
menu/select.
5'.'%6
To go back to the Bluetooth setting display, press back/hold/int'com.
www.uniden.com
U s in g t h e B lue t o o t h F ea t u re [ 4 6 ]
Using the Bluetooth Feature
To go back to the Bluetooth setting display, press back/hold/int'com.
Us i n g t h e B l u e t o o t h Fe at u r e
To reconnect the Bluetooth Headset
If a paired headset will not connect to the handset, you can reconnect to the
headset.
1) When the phone is in standby mode, press menu/select on the handset.
2) Select the Bluetooth icon.
3) Use the up/down key to select
He a ds e t , and then press menu/select.
*GCFUGV
4) Press the OPTIONS soft key and select Re co n ne c t .
/QVQNQTC*5
5) Use the up/down key to select Y e s , and then press menu/
select.
You will hear a confirmation tone, and
Do n e!
appears.
De-register the Bluetooth Headset
126+105
1RVKQPU
If you want to stop using a paired headset completely, you can 4GEQPPGEV
deregister it; this will allow you to pair another headset in the &GTGIKUVGT
future. You can also try deregistering and re-pairing a headset if
you can't connect to it.
1) When the phone is in standby mode, press menu/select on
the handset.
5'.'%6
2) Select the Bluetooth icon.
3) Use the up/down key to select
He a ds e t , and then press menu/select.
4) Press the OPTIONS soft key and select De re g i ste r .
5) Use the up/down key to select Y e s , and then press menu/select.
You will hear a confirmation tone, and
[ 4 7 ] U s in g t h e B lue t o o t h F e at u re
De r eg i st ra t io n s u cc es s fu l !
appears.
www.uniden.com
Using Your Phone
note
•Before using a mobile
line, you need to
register the mobile
phone to the base (see
page 38).
•When you dial a
number with the
handset in standby
mode, hyphens are
inserted between
numbers.
•If the line is already in
use, all other
registered handsets
and the base display
"I n U s e ."
If you have a Bluetooth v1.1 compliant mobile phone and register it to the base,
you can make or receive a call through the mobile line as well as the normal land
line. To use the mobile line, press the MOBILE soft key. The two lines will be
completely independent on your phone. For example, you can have one handset
talking on LAND line while another handset and the base unit participate in a 3way conference on the mobile line.
•You can not make or receive a land line call using a Bluetooth mobile phone.
•A Bluetooth mobile phone will not ring when the ELBT595 receives a land line call.
Making Calls Using the Land Line
From the Handset
1) Remove the handset from the charging cradle.
2) Flip the top panel up.
3) Press talk/flash or the LAND soft key.
For mobile line connection, press the MOBILE soft key.
Use the up/down key to select the Mobile phone you
want to use and press the CONNECT soft key.
OR
www.uniden.com
Us i n g Y ou r Ph o ne [ 4 8 ]
U s in g Yo u r P h o n e
4) Dial the number.
note
If you need the phone to pause before dialing more digits (for example, to enter
an access code or extension), press menu/select, and select P au s e E nt ry from
the list. P appears in the display.
4) Press talk/flash or the LAND soft key for Land line.
For Mobile line connection, press the MOBILE soft key. Use the up/down key to
select the Mobile phone you want to use and press the CONNECT soft key.
From the Handset Speakerphone
1) Remove the handset from the charging cradle.
2) Flip the top panel up.
3) Press (Speaker Phone) on the side of the handset.
4) Listen for the dial tone.
5) Dial the number.
6) When the other party answers, talk into the microphone
in the bottom of the handset.
[ 4 9 ] U s in g Y o ur P ho n e
•In the list for mobile
line, select the mobile
marked with *.
A mobile without *
beside it is out of
range.
•When making a call
using the mobile line,
you must dial the
number in 10 seconds,
or the phone return to
standby mode.
•For best performance,
use the speaker phone
in a quiet room and let
the caller finish
speaking before you
speak. If you or the
other party has
difficulty hearing,
adjust the speaker
volume.
www.uniden.com
Us i n g You r P h o ne
1) Remove the handset from the charging cradle.
2) Flip the top panel up.
3) Dial the number.
From the base
note
•If Open to Answer is
on, the phone will
automatically answer
the call when you flip
the top panel up (see
page 25 for setting).
•If Any Key Answer is
on, you can also press
any number key on the
keypad to answer a call
(see page 25 for
setting).
•If you set mobile
priority on the base or
a handset, it will
automatically connect
to the priority mobile
when you press the
MOBILE soft key.
www.uniden.com
OR
1) Dial the number.
If you need the phone to pause before dialing more digits (for example, to enter
an access code or extension), press menu/select, and select P au se En t ry from
the list. P appears in the display, which represents a 2-second pause.
2) Press /flash. For Mobile line connection, press the MOBILE soft key. Use the
up/down key to select the Mobile phone you want to use and press the CONNECT
soft key.
Receiving a call/AutoTalk set to Off
Handset is in the cradle
Handset is off the cradle
1) Flip the top panel up.
1) Remove the handset from the
2) Press talk/flash or the corresponding
charging cradle.
soft key (LAND or MOBILE).
2) Flip the top panel up.
3) Press talk/flash or the corresponding
soft key (LAND or MOBILE).
Us i n g Y ou r Ph o ne [ 5 0 ]
U s in g Yo u r P h o n e
•Make sure the Auto
Answer feature on your
Bluetooth mobile
phone is turned off. If
AutoAnswer is on, your
mobile may answer the
call and interrupt your
ELBT595. If this
happens, the ELBT595
will place the call on
hold.
1) Press /flash or the LAND soft key.
For Mobile line connection, press the MOBILE soft key. Use
the up/down key to select the Mobile phone you want to use
and press the CONNECT soft key.
2) Dial the number.
note
Hanging Up
From the handset or handset speakerphone, press end or close the top panel.
From the base, end/find hs.
•While using the
handset speaker phone
or a headset, closing
the top panel will not
hang up the call.
Switching to the Handset Speakerphone During a Call
To switch a normal call to the speakerphone, press (speaker phone) on the side of
the handset. To switch from a speakerphone call to a normal call, press (speaker
phone).
•To scroll through the
help, press the >>| soft
key or the right key.
Moving out of range
If you move your handset farther from the base unit during a call, you might start
to hear more noise than usual. If you go too far from the base, you'll hear a beep
and see No Si gn a l P re s s H EL P. Press the HELP soft key on the display.
[ 5 1 ] U s in g Y o ur P ho n e
www.uniden.com
Us i n g You r P h o ne
From the base
Press /flash or the corresponding soft key (LAND or MOBILE).
Call Waiting
note
•You must subscribe
through your local
telephone company to
receive Call Waiting or
Caller ID on call
waiting service.
•Your phone can't show
call waiting caller ID
information when a
call is on hold.
If you hear a call waiting tone while you're on a call, press talk/flash or /flash
on the base to switch to the new call. After a short pause, you'll hear the new
caller. Press talk/flash or /flash on the base again to go back to the original
caller.
Call Waiting Deluxe
If you subscribe to Call Waiting Deluxe (CWDX) from your phone
company, you have several different options when you get a call
waiting call. When you hear the call waiting tone, instead of
answering the call, you can press menu/select or the OPTIONS
soft key, and then select C allW aitD elu xe. Then, use the up/down
key or press 1-7 (1-4 for Mobile line) to choose from the
following options:
%CNN1RVKQPU
/WVG
%CNN9CKV&GNWZG
%QPHGTGPEG
%CNN4GEQTF
#WFKQ6QPG
%CNN2TKXCE[
5'.'%6
Option
Ask to Hold
A prerecorded message tells the caller that you'll
1
be available shortly, and the call is place on hold.
-
Tell Busy
A prerecorded message tells the caller you are busy, and
the waiting call is disconnected.
2
1
Forward
The caller is sent to your voice mail box, if available.
3
-
Answer/Drop 1
Disconnects the first call, and connects to the new caller. 4
2
Conference
Starts a conference call with your first and second callers. 5
4
Drop First/Drop Last
During a conference call, allows you to choose to drop the
6/7
first or last caller.
-
Answer/Hold 1
Releases all active calls (if any exist) and accepts the
other (held or waiting) call
3
-
Us i n g Y ou r Ph o ne [ 5 2 ]
U s in g Yo u r P h o n e
www.uniden.com
Definition
On a LAND line, On a MOBILE line,
press
press
From the handset
During a call, press back/hold/int'com, and then end to
put the call on hold. Press talk/flash to go back to the
call.
From the base
During a call, press back/hold/int'com, and then end/
find hs to put the call on hold. Press /flash to go back
to the call.
Conferencing
570#
*QNF
.#0&
/'55#)'
0
/1$+.'
•If you leave a call on
hold for more than 5
minutes, warning tone
sounds and Hold
Reminder! Answer
held line appears,
and the line will
disconnect in 15
seconds.
570#
*QNF
.#0&
note
/1$+.'
If you have two handsets and the MOBILE line, up to five people can participate in
a conference call. A five-way conference call consists of
•If someone is using
another handset or the
base in Privacy Mode,
Unavailable appears
in the display and you
cannot join the call.
Outside Line (LAND) + Outside Line (MOBILE) + Base +
Two Handsets.
Only two handsets can participate in any conference call.
Joining a Conference Call
You can easily join a call already in progress.
[ 5 3 ] U s in g Y o ur P ho n e
www.uniden.com
Us i n g You r P h o ne
Placing a Call on Hold
note
During a line
conference with
LAND/MOBILE, mobile
transfer, flash,
dialing, CWDX,
phonebook/caller ID/
redial operations are
not available.
From the base
1) Press corresponding soft key (LAND or MOBILE) on the base to join the
conference call.
2) To hang up, press end/find hs on the base. The handset(s) will still be connected
to the call.
From a second handset
1) Press corresponding soft key (LAND or MOBILE) on the handset to join the call.
2) To hang up, return the handset to the cradle, or press end on the handset. The
base or other handset will still be connected to the call.
Conferencing with one outside line
To hold a conference call with one outside line, simply have the handsets or base
join the call.
www.uniden.com
Us i n g Y ou r Ph o ne [ 5 4 ]
U s in g Yo u r P h o n e
Conferencing two outside lines (LAND / MOBILE)
Follow the steps below to allow both outside lines to participate in a conference
call:
1) During a call, press back/hold/int’com, and then end or end/find hs on the base
to put the first caller on hold.
2) Press the line soft key (LAND or MOBILE) for a free line to make or answer a
second call.
3) When the second call is connected, press menu/select and select
%QPHGTGPEG
to initiate a conference call.
4) To disconnect a single caller, press the corresponding soft key (LAND or MOBILE)
to place the caller you wish to keep speaking to on hold and then press end or
end/find hs to hang up the other caller.
note
You can reject a call
to a mobile line by
pressing
key
when the phone is
ringing.
To hang up both lines, press end or end/find hs with the two line connected.
Mobile Line Transfer
The phone allows you to transfer a mobile line call to your mobile phone, or receive
a mobile line call from your mobile phone.
From your mobile phone to ELBT595 phone
Press the MOBILE soft key on the ELBT595 phone during a call with your mobile
handset, and then the CONNECT soft key.
From the ELBT595 phone to your mobile phone
Press menu/select during a mobile line call, and select T ra ns f er > Mo b il e .
T r an s fe r re d appears and the ELBT595 phone return to standby mode.
[ 5 5 ] U s in g Y o ur P ho n e
www.uniden.com
Us i n g You r P h o ne
For example, to hang up the MOBILE line but leave the LAND line connected:
- Press the MOBILE soft key to put the LAND line on hold.
- Press end or end/find hs to hang up the MOBILE line.
- Press the LAND soft key to take the LAND line off hold and continue the
conversation.
Redialing Calls
note
•Each redial record can
store up to 32 digits.
•To store redial numbers
in the Phonebook, see
page 66.
You can quickly redial the last 20 phone numbers for each
handset and 10 numbers for the base.
1) With the phone in standby mode, press redial/ on the
handset (or press menu/select, and then select R ed i al
on the base). This brings up the redial list. Use the up/
down key to scroll through the numbers, and select the
number you want to dial.
2) Press the LAND soft key, talk/flash (or ) or the CALL soft
key or /flash on the base to dial the selected number.
If you want to call using the mobile line, press the CALL soft
key, then MOBILE soft key. Use the up/down key to select the
Mobile phone to use and press CONNECT soft key.
4GFKCN
You can also display the redial list for redial number with the
phone in talk mode. After selecting the redial number, press the
DIAL soft key to redial the number.
%#..
126+105
www.uniden.com
Us i n g Y ou r Ph o ne [ 5 6 ]
U s in g Yo u r P h o n e
Deleting Redial Records
If you want to delete a phone number from the redial list, go to the redial list in
standby mode, and select the number you want to delete. Press the OPTIONS soft
key, and select D e le t e S el ec t io n . Use the up/down key to move the cursor to Y es .
Press menu/select. If you want to delete all the redial records, select D el e te Al l ,
and then Y e s . Press menu/select.
Us i n g You r P h o ne
Adjusting Base Ringer and Speaker Volumes
Adjusting the base ringer volume
You can choose from three ringer settings on the base: off, low,
and high. When the phone is in standby mode, go to the Ri n gs /
Vo lumes menu, and then select Ringer Volume . Use the up or down
key to select the Tel type (LAND or MOBILE), and press menu/
select. Use the up, down, right, or left key to select the ringer
volume, and press menu/select. You will hear a confirmation
tone.
Adjusting the base speaker volume
You can adjust the volume of the answering machine speaker while a message is
playing. Press the volume up/down key during a message to choose one of the 10
volume levels.
You can also set the speaker volume from the menu. Go to R in g s/ V ol u me s menu, and
then select Sp ea k er Vo l um e . Use the up, down, right, or left key to select the
speaker volume, and then press the menu/select. You will hear a confirmation tone.
[ 5 7 ] U s in g Y o ur P ho n e
www.uniden.com
Using the Handset Volume Setting Menu
Ringer: Adjust the handset ringer volume
You can choose from three different ringer
volume settings on your handset: off, low,
and high. When the phone is in standby
mode, go to the Ringer Options menu, and
then select Ringer Volume. Use the up, down,
right, or left key to select the Tel type (LAND
or MOBILE), and press menu/select. Use the
up/down key to select the ringer volume, and
press the menu/select. You will hear a
confirmation tone.
Ear speaker: Adjust the handset earpiece
volume.
You can choose from six volume levels for the
earpiece speaker. To adjust the earpiece
volume, go to Speaker Setup menu, and select
E a rp i ec e V ol u me and select the volume level
you want to use.
4KPIGT1RVKQPU
4KPIGT8QNWOG
*KIJ
5'.'%6
5RGCMGT5GVWR
5'.'%6
'CTRKGEG
8QNWOG
5'.'%6
5'.'%6
www.uniden.com
Us i n g Y ou r Ph o ne [ 5 8 ]
U s in g Yo u r P h o n e
You can also adjust the earpiece volume
during a call by pressing the or key on
the side of the handset, and then up (to
make it louder) or down (to make it softer).
You can also adjust the handset speaker volume during a call by
pressing the or key on the side of the handset, and then up
(to make it louder) or down (to make it softer).
Audio Tone
If you aren't satisfied with the audio quality of your phone, you
can adjust the Audio Tone of the earpiece. Your phone gives you
three audio tone options: low, natural or high. Go to Speaker
Setup menu, and select A u di o T on e and select the option that
sounds best to you.
(Audio tone adjustments only apply to the earpiece, not the
speakerphone.)
5RGCMGT
(Speaker Setup)
Speaker Volume
8QNWOG
5'.'%6
Audio Tone
#WFKQ6QPG
.QY6QPG
5'.'%6
Mute
While the handset is ringing, you can mute the handset ringer for this call by
pressing end on the handset. To mute the base ringer, press
or end/find hs on
the base. The phone will ring again on the next call.
Mute the Microphone
When you're on the phone, press menu/select and select M u te to turn off the
microphone so the caller can't hear you. The display shows M ut e O n while the
microphone is muted. To turn off muting, repeat the above step again.
[ 5 9 ] U s in g Y o ur P ho n e
note
You can only mute the
handset ringer if the
handset is off the base
when the phone starts
ringing.
www.uniden.com
Us i n g You r P h o ne
Speaker: Adjust the handset speaker volume
You can choose from six volume levels for the handset
speakerphone. To adjust the speaker volume, go to Speaker Setup
menu, and select S p ea ke r V o lu m e select the volume level you want
to use.
Tone Dialing Switch Over
If your telephone company uses pulse dialing, you can
switch over to tone dialing after the call connects. This
feature is useful when you need tone dialing to use any
automated menu systems, such as telephone bank tellers,
telephone prescription refills, customer support menus,
etc.
If your phone is set to pulse dialing mode, make your call
normally. Once your call connects, press the */tone key. Any digits you enter from
then on will be sent as tone digits. When this particular call ends, the phone
automatically returns to pulse dialing mode.
Privacy Mode
Privacy mode prevents interruption from other registered
handsets or the base. This works only when the phone is in use.
While on a call, press the OPTIONS soft key on the handset or
base. Use the up/down key to select C al l Pr i va cy. P ri v ac y Mo d e
O n appears in the display. To exit Privacy Mode, use the same
procedure. P ri va c y M od e O f f appears.
6CNM
2TKXCE[/QFG1P
126+105
/1$+.'
To locate the handset, press end/find hs on the base when the
phone is in standby mode. Select the handset to page. The
handset beep for 60 seconds, and Pa gi n g appears on the handset
display. To cancel paging, press any key on the handset or end/
find hs on the base.
www.uniden.com
Us i n g Y ou r Ph o ne [ 6 0 ]
U s in g Yo u r P h o n e
Find Handset
!
The Date & Time must be set to use the Calendar features. To set the Date &
Time, scroll to Global in the System Setup option (see page 24).
Your phone has a built-in calendar that you can use to schedule
reminders and appointments (all the way through December 31,
2099). You can set alarms for up to 30 different events.
A pop-up screen appears and reminder tone sounds when the
scheduled time & date comes. To show detailed info on the
reminder, press the VIEW soft key. To mute the reminder tone,
press the MUTE key.
4GOKPFGT
note
Before using this
feature, you must set
the date and time (see
page 24).
5'.'%6
To reset the reminder and clear the screen, press end when
reminder tone stops. To di smis s Remi nde r disp lay pr ess D ISMI SS
appears. Press the DISMISS soft key. The phone return to
standby mode.
Scheduling a reminder
Select the Reminder option to show Reminder (Calendar). Today
is highlighted. If the reminder is set for the morning, a bar
appears in the lower left of the date number; if the reminder is
set for the afternoon or evening, a bar appears in the lower
right of the date number. Use up, down, right or left key to
move the cursor to the date.
[ 6 1 ] U s in g Y o ur P ho n e
4GOKPFGT
/C[
5%*'&7.'
www.uniden.com
Us i n g You r P h o ne
Reminder (Handset only)
1) Press menu/select to select a day.
2) Press the STORE soft key to add a reminder.
3) Press menu/select to set the date and time.
4) Use the number keypad or */tone to select the hours and
minutes. Press menu/select when you're finished.
5) To change the title, select and press menu/select.
Use the number keypad, left, right key, and the DELETE soft
key. Press menu/select when you're finished.
/10
5614'
6) If you want to set recurrence, select , and press menu/select. Select the
frequency of the recurrence (None, Daily, Weekly, Monthly, Yearly) from the list.
Press menu/select when you're finished.
7) If you want your phone to ring when this reminder occurs, move to the line ,
and press menu/select. Select the ringer tone you want the phone to ring. Press
menu/select when you're finished.
8) To enter a description for this reminder, select and press menu/select. Ed i t
M e ss ag e appears. You can enter up to 80 characters. Press menu/select when
you're finished.
9) When everything is correct, press the DONE soft key.
www.uniden.com
4GOKPFGT
/C[
5%*'&7.'
Us i n g Y ou r Ph o ne [ 6 2 ]
U s in g Yo u r P h o n e
Editing and deleting reminders
You can edit reminders by pressing the SCHEDULE soft key, then
select the reminder and press the OPTIONS key. Select E di t
S e le c ti on , and you can edit the date, time, reminder tone, and
text the same way you entered them for a new entry.
To delete reminders, select the reminder and press the OPTIONS
soft key. Select D e le t e Se l ec t io n . To delete all reminders, select
D e le t e Al l .
Your phone lets you store up to 100 entries in each handset and base. You can store
up to 4 phone numbers for each name in your phonebook (for a total of 400
numbers), and you can assign names to groups for easy searching. You can store a
distinctive ringer tone and picture display, to your each or group.
You can enter your phonebook by pressing the left key
on the handset or base.
Creating and Editing Phonebook Entries
Press left key and press the STORE soft key for the first entry. From the 2nd entry
on, press the left key, and then the OPTIONS soft key. Select Ne w E n tr y to store, or
E d it Se l ec ti o n to edit the location. Enter as much of the following information as
you want. Press menu/select to enter each entry and confirm the selection. When
you're finished, press the DONE soft key to save this phonebook entry.
[ 6 3 ] U s in g t h e P h on e bo o k
www.uniden.com
U s i n g t h e P ho n e b o o k
Using the Phonebook
note
U s i n g t h e P ho n e b o o k
Step 1: Name
,
'FKV2JQPGDQQM
0Q0COG
Select ,
and use the keypad to enter the name for
this entry. You can enter up to 16 characters. If you don't
want to enter a name, your phone will store this entry as
No Name. Press menu/select when you're finished, and
your phone will go back to the current phonebook entry.
0Q0WODGT
0Q0WODGT
0Q0WODGT
0Q0WODGT
0Q5GNGEVKQP
5'.'%6
Step 2: Number ,
Select ,
and enter a phone number for this entry.
'FKV2JQPGDQQM
If you need your phone to pause between digits when it's /'55#)' 0Q0COG
0Q0WODGT
dialing (for example, to enter an extension or an access
5'.'%6
code), press the PAUSE soft key to insert a two-second
pause. You'll see a P in the display. You can stack more
than one pause together if two seconds isn't long enough. Each pause counts as
one digit; you can enter up to 20 digits for the phone number. Press menu/select
when you're finished.
0
You can save up to 4
numbers for each
phonebook entry.
You'll have to delete one
of the existing numbers
before you add a new
one.
You can select an icon to remind you which number this is: home
, mobile ,
finished.
, or general phone number
Step 3: Unique Ring
,
, work
,
. Press menu/select when you're
,
Select ,
to attach a special ring to this phone. Select the ringer tone you want
the phone to use when this person calls, or select N o S el ec t io n to have the phone
use its regular ringer tone. Press menu/select when you're finished, and your phone
will go back to the current phonebook entry.
www.uniden.com
U s in g t he P h on e b oo k [ 6 4 ]
Select
to attach a special screen display to this entry. Select the display you
want the phone to use when this person calls, or select N o S el e ct i on to have the
phone use its regular display. You can press the VIEW soft key to see the display
choices:
Press menu/select when you're finished, and your phone will go back to the current
phonebook entry.
Step 5: Group ,
Select ,
to place this entry into a phonebook group. Select the group (0-9)
you want this entry to belong to, or select No Se l ec ti o n to leave the entry outside
of any group. Press menu/select when you're finished, and your phone will go back
to the current phonebook entry. See page 69 for information on creating and
editing groups.
Step 6: Speed Dial ,
Select 0-9 to save this number to one of the 10 speed dial numbers or No Se l ec t io n
if you don't want to save it to a speed dial number. If there's already a phone
number saved to the speed dial number you select, your phone will ask if you want
to overwrite the number. Press menu/select when you're finished, and your phone
will go back to the current phonebook entry.
[ 6 5 ] U s in g t h e P h on e bo o k
www.uniden.com
U s i n g t h e P ho n e b o o k
Step 4: Unique Display (Handset only)
You can store Caller ID or redial numbers in your phonebook so you can use them
later. Go to the Caller ID list or redial list and select the number you want to store.
(If the Caller ID information didn't include the number, then you can't store it.)
1) With the phone in standby mode, go to the Caller ID list or redial list and select
the number you want to store.
2) Press the OPTIONS soft key, and then select Ad d t o P ho n eb oo k .
3) Use the up/down key to select N e w E nt ry to enter a new phonebook location.
If you want to added a number to the existing phonebook location, select
S t or e & E d it , and then select a location to edit.
4) Enter each entry and confirm the selection by following the steps in pages 64-65.
Storing and Editing Numbers from the Dial Operation
1) With the phone in standby mode, enter the number to store using the number
keypad.
2) Press the OPTION soft key and select Ad d t o P ho n eb oo k .
3) Use the up/down key to select N ew E n tr y to enter a new phonebook location.
If you want to added a number to the existing phonebook location, select S t or e
& Ed it , and then select a location to edit.
4) Enter each entry and confirm the selection by following the steps in pages 6465.
www.uniden.com
U s in g t he P h on e b oo k [ 6 6 ]
U s i n g t h e P ho n e b o o k
Storing Caller ID or Redial Numbers in the Phonebook
With the OPTIONS soft key, you can delete phonebook entries, copy entries to
another handset, check how many empty phonebook and speed dial entries you
have available, sort your phonebook by groups, and name phonebook groups.
Deleting phonebook entries
Go to the phonebook and select the entry you want to delete. Press the OPTIONS
soft key and select De l et e S el ec t io n . Your phone will ask you to confirm select Y e s .
To delete all the entries from your phonebook, go to the phonebook and press the
OPTIONS soft key without selecting an entry. Select D el ete Al l . Your phone will ask
you to confirm select Y e s .
Copying phonebook entries to another handset or base
Note: When you copy entries to another handset or base, the group, speed dial, and
icon information won't be transferred. Your phone will cancel the copying
process if any one of the following things occurs:
-- If the handset you are copying to doesn't have enough memory (the phone will show
N ot en o ug h m em o ry in re c ei vi n g u ni t ).
-- If the handset you are copying to already has that phone number in its phonebook.
-- A call comes in during the copying process.
[ 6 7 ] U s in g t h e P h on e bo o k
www.uniden.com
U s i n g t h e P ho n e b o o k
Managing the Phonebook
To copy all the phonebook entries, go to the phonebook and
press the OPTIONS soft key without selecting an entry. Select
then C op y A ll . Select the handset or base you want to copy to
the entry to. Your phone will ask you to confirm select Y es .
6QYJKEJWPKV!
*CPFUGV
*CPFUGV
*CPFUGV
$CUG
5'.'%6
Checking the number of stored entries
To see how many phonebook entries you have, go to the
phonebook and press the OPTIONS soft key and select Ph on e Bk
C a pa c it y. The phone will show you how many stored names
(entries) and how many stored phone numbers (total) you have.
1RVKQPU
0GY'PVT[
'FKV5GNGEVKQP
&GNGVG5GNGEVKQP
%QR[5GNGEVKQP
To see your speed dial entries, go to the phonebook and press the
OPTIONS key and select C h ec k D i al . The phone will show you
which speed dial numbers have phone numbers stored in them.
2JQPG$M%CRCEKV[
&GNGVG#NN
5'.'%6
Changing the sorting order
To change the sorting of your phonebook, go to the phonebook and press the
OPTIONS soft key and select So rt . Select Al pha be ti cal ly by pressing menu/select to
see the list of names in alphabetical order; select G ro up by pressing menu/select to
see the list of groups in alphabetical order. For alphabetical order, enter a letter
from the keypad to jump to the first entry beginning with that letter.
www.uniden.com
U s in g t he P h on e b oo k [ 6 8 ]
U s i n g t h e P ho n e b o o k
To copy a single entry, go to the Phonebook and select the entry
you want to copy. Press the OPTIONS soft key and then select
C o py S e le c ti on . Select the handset or base you want to copy to
the entry to.
U s i n g t h e P ho n e b o o k
Naming phonebook groups
Your phone comes with 10 groups to organize your phonebook.
You can name groups things like "Family" or "Friends" or
"Softball team" to let you find entries in your phonebook more
quickly.
1RVKQPU
%QR[5GNGEVKQP
2JQPG$M%CRCEKV[
&GNGVG#NN
%QR[#NN
5QTV
Follow the steps below to name a group:
'FKV)TQWR0COG
1) Go to the Phonebook and select the OPTIONS soft key.
5'.'%6
2) Scroll down to E di t G ro u p N am e and press menu/select.
3) Scroll down to the group number you want to edit, and press menu/select.
4) Use the number keypad to enter a name for this group. Press menu/select when
finished.
Making Calls with the Phonebook
To call someone in your phonebook, go to the phonebook and select that person's
phonebook entry, and then press menu/select. Select the number (one of the four
available) that you want to call, and then press talk/flash or or /flash on the
base. Press the LAND or MOBILE soft key. You can also dial the number with the
phone in talk mode. After select number, press the DIAL soft key. The number at the
top of the list will dial.
note
To make a speed dial
using the mobile line,
press the MOBILE soft
key.
Using the Speed Dial
With the phone in standby mode, press and hold the number of the speed dial entry
you want to call until the phonebook entry appears. Select the number (one of the
four available) that you want to call, and then press the LAND or MOBILE soft key,
or talk/flash and or /flash on the base.
[ 6 9 ] U s in g t h e P h on e bo o k
www.uniden.com
Caller ID Features
note
Some paired mobile
phones may not support
Caller ID information
over a Bluetooth
connection.
If you subscribe to Caller ID from your phone company,
your phone will show you the caller's phone number and
name (if available) whenever a call comes in.
%CNNGT+&
If you subscribe to both Call Waiting and Caller ID the
phone also shows you the name and the number of call
waiting calls (that is, calls that come in while you're on
the line.)
2/
,CPG5OKVJ
.#0&
/1$+.'
0
.#0&
/1$+.'
Using the Caller ID List
You can store up to 100 Caller ID numbers in each
handset or the base. To see the Caller ID list, press the
right key on the handset or base. The phone will show
the Caller ID list. You can use the up/down key to scroll
through the list, or you enter a letter with the keypad
to jump to the first caller ID name that starts with that
letter.
www.uniden.com
C al le r ID F e at u r es [ 7 0 ]
C a l l e r I D Fea t u r e s
#
/'55#)' ,CPG5OKVJ
1RVKQPU
&GNGVG5GNGEVKQP
note
&GNGVG#NN
#FFVQ2JQPGDQQM
%+&%CRCEKV[
Calling someone from the Caller ID list
Go to the Caller ID list and select the number you want to call.
If you need to add a "1" to the number for a long distance call,
5'.'%6
press */tone. If you need to add your saved area code to the
number, press #. Then press the LAND or MOBILE soft key or talk/flash or , on
the handset, or /flash on the base.
When you delete a Caller
ID number, you delete it
permanently.
Deleting Caller ID numbers
To delete only one Caller ID number, go to the Caller ID list and select the number
you want to delete. Press the OPTIONS soft key, and select De le t e Se l ec t io n . When
the phone asks you to confirm, select Ye s .
To delete all the Caller ID numbers, go to the Caller ID list and press the OPTIONS
soft key. Select De le t e A ll . When the phone asks you to confirm, select Ye s .
[ 7 1 ] C a l l e r ID F ea t u re s
www.uniden.com
C a ll er ID Fe a tur e s
If you want to see how many Caller ID numbers are stored in
your phone, Press the right key, and then the OPTIONS soft key.
Select C ID Ca p ac i ty.
Answering Machine
The phone has a built-in answering machine that answers and records incoming
calls. You can also use your answering machine to record a conversation, leave a
voice memo message, or announce a special outgoing message to callers when
you're away from your phone.
Features
www.uniden.com
Digital Tapeless Recording
Up to 12-15 minutes of Recording Time
Call Screening
Personal or prerecorded Outgoing Messages
Voice Prompts (English, Spanish, or French)
Time and Day Announcement
Remote Message Retrieval
Toll Saver
Conversation Recording
Voice Memo
Message Alert
Retrieve Messages using Handset
Do Not Disturb
Hands-free Speakerphone
An s we r in g M a c hi ne [ 7 2 ]
A n s w er i n g M a c h i n e
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Answering Machine
Setting Up the Answering Machine
To access the answering machine settings, go to the
System Setup Menu and select Answer Machine.
5[UVGO5GVWR
5'.'%6
1RVKQPU
/'55#)' 4GEQTF/GOQ
Security Code
If you want to call in and get your messages when you're away
from, you'll have to set a security code. Go to A n sw e r M ac hi n e
and select S e cu r it y C od e . use the keypad to enter a two-digit
number (01-99), and press menu/select when you're done. A
confirmation tone tells you the security code has been saved.
0
5[UVGO5GVWR
5'.'%6
5GEWTKV[%QFG
(System Setup)
Answer
Machine
Security
Code
[ 7 3 ] A n s we r in g M a c hi ne
www.uniden.com
(System Setup)
Answer
Machine
Ring Time
Record Time
Record Time
You can set how long a caller has to leave a message before the
answering machine hangs up. Go to An s we r M a ch i ne and select
R e co r d Ti m e . Then select the maximum length of messages;
choose from 1 minute or 4 minutes. The Announce Only feature
makes the answering machine answer call but it won't let callers
leave a message. When the Announce Only feature is on, and
will appear on the base.
4KPI6KOG
6QNN5CXGT
6KOGU
6KOGU
VKOGU
5'.'%6
4GEQTF6KOG
/KPWVG
/KPWVGU
#PPQWPEG1PN[
5'.'%6
An s we r in g M a c hi ne [ 7 4 ]
A n s w er i n g M a c h i n e
www.uniden.com
Ring Time
You can set the number of times the phone will ring before the
machine answers the call. Go to An s we r M a ch i ne and select R in g
T i me . Then select the number of times you want the phone to
ring; choose from 2, 4, or 6 times. The Toll Saver feature makes
the answering machine answer after two rings if you have new
messages and after four rings if you don't. If you call long
distance to check your messages, Toll Saver lets you hang up
after three rings and not get charged for the call.
The message alert turns off automatically after you listen to all
your new messages. You can also turn off the message alert by
pressing any key on the base.
Language
To change the language of your answering machine's voice
prompts and pre-recorded greetings, go to A ns w er Ma ch i ne and
select L an gu a ge . Select E ng l is h , Fr a n ユ ai s (French), or E sp a ツ ol
(Spanish).
/GUUCIG#NGTV
1P
1HH
(System Setup)
Answering
Machine
Message Alert
5'.'%6
Language
.CPIWCIG
'PINKUJ
(TCP㩟CKU
'URC㩌QN
5'.'%6
Call Screen
If you want to be able to listen to the caller's message before
you answer, turn on the call screen feature. Go to A n sw e r
M a ch i ne and select C a ll Sc r ee n . Select On to turn on call
screening.
Call Screen
%CNN5ETGGP
1P
1HH
5'.'%6
[ 7 5 ] A n s we r in g M a c hi ne
www.uniden.com
Answering Machine
Message Alert
If you want the answering machine to beep every 15 seconds
whenever you have unheard messages, turn on the message alert
tone. Go to An s we r M a ch i ne and select M e ss a ge A l er t . Select On .
A confirmation tone tells you the setting has been saved.
Setting Your Outgoing Greeting
(System Setup)
Answering
Machine
Record
Greeting
Greeting
Options
Your answering machine comes with a prerecorded greeting: "Hello. No one is
available to take your call. Please leave a message after the tone." You can use this
greeting, or you can record your own.
Your greeting must be more than 2 seconds and less than 30 seconds.
Recording a greeting
From the base
To record your own greeting, make sure the phone is in standby mode. Go to Re c or d
Gr eeting , and then press menu/select. Press the START soft key. After the answering
machine says, "Record greeting," you can start recording. The message counter
displays 30 and then begins to count down. When you're finished, press the STOP
soft key. The answering machine will play back your greeting so you can hear it.
From the handset
Press
. Press
/8. After the answering machine says, "Record greeting," you
can start recording. When you're finished, press
/8 key.
www.uniden.com
An s we r in g M a c hi ne [ 7 6 ]
A n s w er i n g M a c h i n e
Choosing a greeting
From the base
To choose between the two greetings, first make sure the phone is in standby mode.
Go to Gr e et in g Op t io n s , and then press menu/select. The greeting currently being
used will be played. If you want to use the other greeting, press the CHANGE soft
key.
From the handset
Press
.
Press
/6. The greeting currently being used will be played. If you want to use
the other greeting, press the key again.
If you want to delete your greeting, press the /4 while the greeting is
playing (You can't delete the prerecorded greeting.)
Using the Answering Machine
Turning On the Answering Machine
From the Handset
You can turn on/off the machine using handset remote function. Select
. Press
/9. Each time the key is pressed the setting switches between On and Off.
From the Base
With the phone in standby mode, press answer on/off. ME S SA G E appears on the
display. If the number is flashing, then there are new messages waiting for you. To
turn your answering machine off, press answer on/off.
A N SW E R O FF appears.
[ 7 7 ] A n s we r in g M a c hi ne
www.uniden.com
Answering Machine
If you want to delete your greeting, press the DELETE soft key while the greeting is
playing. (You can't delete the prerecorded greeting.)
note
•You can't delete
unheard messages. If
you try to delete
messages before
listening to them, the
answering machine will
beep and say "Please
playback all
messages."
•If you press |<<
during the first two
seconds (or press
/1 during the first
4 seconds) of a
message, the
answering machine
goes back to the
previous message.
Reviewing Messages
When you have a new message, the new message LED on the handset blinks and
appears on the handset. On the base,
appears. The LED stops blinking when
you've listened to all your new messages. The answering machine plays your new
messages first. After you play all your new messages, you can then play your old
messages.
You can review your messages from the base or from the handset:
From the base
Playing your messages
Press
. The answering machine tells you
how many new and old messages you have. It
announces the message number, plays the
message, then announces the time and date
that message was received.
Press the |<< soft key once to go to the
Press
/1 once to go to the beginning of
beginning of the current message. Press the |<< the current message. Press
/1 repeatedly
soft key repeatedly to go back to a previous
to go back to a previous message.
message. Press and hold the |<< soft key to
rewind through the current message.
Skipping a message
Press the >>| soft key to go to the beginning of Press
/3 to go to the beginning of the next
the next message. Press and hold the >>| soft
message. Press and hold
/3 to fast forward
key to fast forward through the current message. through the current message.
Delete a message
While a message is playing, press
to delete
it. The message is permanently deleted.
While a message is playing, press
/4 to
delete it. The message is permanently deleted.
Delete all messages
While the phone is in standby, press
to
delete all messages. When the answering
machine asks you to confirm, press
again.
All messages are permanently deleted.
(This command is not available on the handset.)
Press
/5 to stop the message playback. Press
end to exit the message system and return to
standby.
An s we r in g M a c hi ne [ 7 8 ]
A n s w er i n g M a c h i n e
Repeating a message
Press
to stop the message playback and
Stop reviewing messages return to standby.
www.uniden.com
From the handset
Press
, The phone tells you how many new
and old messages you have. Press
/2 to play
your messages. It announces the message
number. After playing the message, the
answering machine announces the time and
date that message was received.
You can record a phone conversation with your handset or base. The conversation
has to last more than two seconds and less than ten minutes. During a
conversation, press menu/select. Use the up/down key to select C al l R ec o rd . The
handset or the base sounds a confirmation tone that can be heard by both parties
and displays R ec o rd in g a C al l . When you want to stop recording, press menu/select
and select C a ll Re co r d again.
Screening Calls
You can screen calls from the base: just let the answering machine answer the call
and listen to the caller leave a message. Answer the phone if you want to talk to
the caller. To mute the call screen, press
.
If you turn on the call screen feature (see page 75), you can also screen calls from
the handset. Let the answering machine answer the call, then press the volume up
key. If you want to talk to the caller, just press talk/flash, and the answering
machine will stop recording. To mute the call screen, press end.
[ 7 9 ] A n s we r in g M a c hi ne
note
•If the recording
memory is full,
Unavailable appears
in the display. You can
not record a
conversation until you
clear some messages
from the memory.
•Every state has
different regulations
governing the
recording of
conversations over the
telephone. Make sure to
check your local, state
and federal laws before
using this product to
record any telephone
conversation in order
to determine that your
use is in compliance
with such laws or
guidelines.
•You can not record
intercom conversations.
•Only one handset can
screen calls at a time.
If another handset is
screening the call,
you'll just hear a beep
when you try to screen
the call, too.
www.uniden.com
Answering Machine
Recording a phone conversation
Do Not Disturb (DND)
The do not disturb feature (DND) allows you to mute the ringer of the base and any
registered handsets at the same time. The phone must be in standby mode. Press
and hold dnd on the base. You will hear a confirmation tone, and the dnd LED
illuminates. To cancel the DND feature, press dnd again. You can also mute the
ringer tone while the phone is ringing by pressing dnd on the base.
Activating the DND while the answering system is off will turn the answering
system on automatically. The answering system setting will reset to the original
setting when you cancel the DND.
Recording a voice memo
The voice memo function allows the user to record messages (more than 2 seconds
and less than 4 minutes). To record your memo, press menu/select on the base.
Select R ec o rd Me mo and press menu/select. Press the START soft key. After the
answering machine says, "Record memo message," you can start recording. When
you're finished, press the STOP soft key.
You will hear a confirmation tone.
www.uniden.com
An s we r in g M a c hi ne [ 8 0 ]
A n s w er i n g M a c h i n e
You can also record a voice memo remotely, press .
Press
/7. After the answering machine says, "Record Memo Message," you can
start recording. When you're finished, press
/7 key.
You can check, play, or delete messages when you are away from home. You can also
record your own greeting message. To access your answering machine remotely, you
need a touch tone telephone and a two-digit security code (see Setting a Security
Code on page 73).
1) Call your telephone number and wait for the system to answer. If Toll Saver is
enabled, answering machine will answer in 2 rings if you have new messages and
4 rings if you don't. If the answering machine is off, it will answer after about 10
rings and sound a series of beeps.
2) During the greeting message (or a series of beeps when the answering machine is
off), press 0 and enter your security code within two seconds.
3) The answering machine announces the current time and the number of messages
stored in memory. You hear "To play incoming messages, press zero-two. For
help, press one-zero." Then, you'll hear a beep.
4) Enter a command from the following chart within 15 seconds. After the first
command, you have two seconds to enter each command.
[ 8 1 ] A n s we r in g M a c hi ne
note
•The system will only
play back messages for
four minutes, and then
it returns to the
command waiting
mode. To continue
playing your messages,
press 0 then 2 again
within 15 seconds.
•If you enter an
incorrect security code
three times, you will
hear a beep and the
system will return to
standby.
•For your convenience,
a remote operation
card is provided for
you to use while away
from home (refer to
page 100).
www.uniden.com
Answering Machine
Remote Operation
Command
Function
0 then 1 Repeat a Message*
0 then 2 Play incoming Messages
0 then 3 Skip a Message
Command
Function
0 then 6 answering machine On
0 then 7 Memo Record/Stop**
Greeting Message Record/
0 then 8 Stop**
0 then 4 Delete a Message
0 then 9 answering machine Off
0 then 5 Stop Operation
1 then 0 Help
* For the Repeat a Message function, press 0 then 1 within about 4 seconds to
repeat the previous message, or press 0 then 1 after about 4 seconds to repeat
the current message.
** The first time you enter the Memo Record or the Greeting Message Record
command, the answering machine will start recording. Enter the same command
again to stop recording.
5) After the command has finished, you hear intermittent beeps indicating that the
system is in the command waiting mode. You can enter another command from
the chart, or you can hang up to exit the system.
6) When you hang up, the answering machine automatically returns to standby.
An s we r in g M a c hi ne [ 8 2 ]
A n s w er i n g M a c h i n e
www.uniden.com
The features in this section require a minimum of two handsets to operate. To add
additional handsets to your system, see "Expanding Your Phone" on page 12.
Using DirectLink Mode
In DirectLink Mode, a pair of handsets
can function as two-way radios.
DirectLink Mode does not interfere with
the main base's ability to make or receive
telephone calls. You must set both
handsets to DirectLink Mode to make a
directlink call.
To enter DirectLink mode, Select Direct
Link option in the main menu. And then
press the ENTER soft key. Di re c tL i nk
M o de co m pl et e . appears when you enter
the DirectLink Mode.
To make a DirectLink call, press the DirectLink soft key. Select the
handset you want to call. To cancel the call, Press end. To answer
a DirectLink call, press talk/flash or on the side of the handset.
Press end when you want to hang up.
To exit DirectLink mode and be able to receive normal phone
calls again, press the CANCEL soft key, and then press the OK
soft key.
[ 8 3 ] M ult i - Ha nd s e t F e at u r es
note
•If the party is out of
range, No Signal
appears in the display,
and the operation will
be canceled.
•While a pair of
handsets are in
DirectLink mode, they
cannot be used to
make or receive calls.
Other handsets can
still make and receive
calls.
&KTGEV.KPM
5'.'%6
www.uniden.com
M u l t i - H a n d s e t Fe a t u r es
Multi-Handset Features
M u l t i - H a n d s e t Fe a t u r es
Room/Baby Monitor
note
•This feature only works
when the handset is
within the range of the
base.
•If the party is out of
range, Unavailable
appears in the display,
and the operation will
be canceled.
This feature allows you to monitor sounds
in another room. Place a handset or the
base in the room you wish to monitor; it
will function as a microphone. A second
handset or the base can be used as a
remote speaker, allowing you to monitor
sounds in the room.
Using Room/Baby Monitor
To enter Room Monitor mode, press
menu/select. Then select the Room
Monitor. Select the handset or base you
want to monitor. Press end or end/find hs
when you want to stop monitoring.
To prevent the monitoring of a particular
handset or the base, simply turn off the
Room Monitor feature on that handset or
on the base.
To turn off the Room Monitor, go to
System Setup, Base/Handset Setup Menu,
and then R o om Mo n it or . Select O ff . You
will hear a confirmation tone.
www.uniden.com
4QQO/QPKVQT
5'.'%6
M u lt i - Ha nd s et F e at u r es [ 8 4 ]
M u l t i - H a n d s e t Fe a t u r es
Intercom
You can use the intercom to talk to another handset or base
without using the phone line. While the phone is in standby
mode, press back/hold/int’com. Select the handset or base you
want to page. If you select A l l , all other handsets and the base
will be paged.
If the handset or base you're trying to page is busy, the phone
displays S y st e m b us y P le a se tr y l at e r. If the handset you're
trying to page is out of range, the phone displays No Si g na l
P r es s H E LP. The page is canceled.
+PVGTEQO
#NN
*CPFUGV
*CPFUGV
*CPFUGV
$CUG
.#0&
/1$+.'
Answering an intercom page
When the handset receives an intercom page, it sounds a tone and shows the ID of
the handset that is paging. If you page the base, B a se appears. To answer the page,
pick up the handset and press talk/flash, , or back/hold/int’com on the handset,
/flash or back/hold/int’com on the base.
• If you receive an outside/int’com call or page while selecting the other handset, the
operation is canceled.
• If the party does not answer within one minute, the operation is canceled.
• During an intercom call, if you receive a call, you will hear a ringer tone from the ear
speaker.
• If all handsets or base are paged, only the first party to answer the page will connect.
• If you do not select a handset or base within 30 seconds, the operation will be canceled.
To hang up an intercom page, press end on either side of the handset or end/find
hs on the base.
[ 8 5 ] M ult i - Ha nd s e t F e at u r es
www.uniden.com
note
You can not transfer a
land line call to a
Bluetooth mobile
phone.
You can transfer a call from one handset or the base to another.
During a call, press back/hold/int’com; this will put the call on
hold. Select the handset or base you want to page. If you select
A l l , all other handsets and base will be paged. To cancel the
page and go back to the caller, press talk /flash on the handset
or /flash on the base.
*QNF6TCPUHGT
#NN
*CPFUGV
*CPFUGV
*CPFUGV
.#0&
/1$+.'
Answering a transfer page
When the handset receives a transfer page, it sounds a tone and
shows the ID of the handset that is paging. If you page the base, Ba s e appears.
Press talk/flash or back/hold/int’com on the handset, or /flash or back/hold/
int’com on the base to answer the page. If you want to accept the transfer and talk
to the outside caller, press talk/flash or back/hold/int’com on the handset, or /
flash or back/hold/int’com on the base.
www.uniden.com
M u lt i - Ha nd s et F e at u r es [ 8 6 ]
M u l t i - H a n d s e t Fe a t u r es
Transferring a Call
note
Power Failure
Your phone has a backup battery in the base that provides power backup in the
event of a power failure.
Battery replacement and handling
When the operating time becomes short, even after the battery is recharged, please
replace the battery. With normal usage, your battery should last about one year.
Warning
To avoid the risk of personal injury or property damage from fire or electrical shock,
use only Uniden AD-0009 AC adapters and Uniden BT-0002 and BT-446 battery
packs with your phone.
•A replacement Uniden
adapter or battery may
be purchased by
calling Uniden's Parts
department (see back
cover page).
•Use only the Uniden
(BT-0002 and BT446)
rechargeable battery
packs supplied with
your cordless phone.
Caution
•
•
•
•
Use only the specified Uniden battery pack (BT-0002 and BT-446).
Do not remove the batteries from the handset to charge them.
Never throw the battery into a fire, disassemble them, or heat them.
Do not remove or damage the battery casing.
[ 8 7 ] N o t e o n P ow e r So u rc es
www.uniden.com
N o te on Po w er S o ur c es
Note on Power Sources
General Information
The phone complies with FCC Parts 15 and 68. Operating temperature:
0 °C to +50 °C (+32 °F to +122 °F)
AC Adapter Information
AC Adapter part number: AD-0009
Input Voltage: 120V AC 60Hz
Output Voltage: 9V DC 600mA
Battery part number: BT-0002 (Handset)
Capacity:
980mAh, 3.7V
BT-446 (Base)
800mAh, 3.6V
Specifications, features, and availability of optional accessories are all subject to
change without prior notice.
www.uniden.com
Ge ne r al I nf or ma t i o n [ 8 8 ]
G en er a l In f or ma t io n
Battery Information
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first. If these steps
do not solve your problem, please call our Customer Hotline at 1-800-297-1023. (Mon - Fri 7 am to 7 pm,
Sat/Sun 9 am to 5 pm, CST. Phone support is closed on holidays.)
Symptom
Suggestion
• Make sure the AC adapter is plugged into the base or the charger (if you have more than one
The charge LED won't illuminate
handset) and wall outlet.
when the handset is placed in
• Make sure the handset is properly seated in the cradle.
the cradle.
• Make sure the charging contacts on the handset are clean.
The audio sounds weak.
• Move the handset and/or base away from metal objects or appliances and try again.
• Make sure that you are not too far from the base.
Can't make or receive calls.
• Make sure that you are not too far from the base.
• Make sure the line is not in use. If an outside call is already using a line, you cannot use that line to
make another outside call.
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter and the backup battery and reconnect.
• Change the Digital Security Code (see page 15).
The handset doesn't ring or
receive a page.
• Make sure that you are not too far from the base.
• Charge the battery in the handset for 10 hours by placing the handset on the base or charging
cradle.
• Change the Digital Security Code (see page 15).
Severe noise interference.
• Keep the handset away from microwave ovens, computers, remote control toys, wireless
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
[89] Troubleshooting
www.uniden.com
Symptom
The Caller ID does not display.
Suggestion
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service is current. There may be a problem
with your Caller ID service.
You cannot register the handset • Charge the battery pack in the handset for 10 hours.
at the base.
• Change the Digital Security Code (see page 15).
The handset doesn't
communicate with other
handsets.
• Change the Digital Security Code (see page 15).
• Make sure that you have registered all handsets.
An extra handset can't join the
conversation.
• Make sure there are not 2 handsets already using the conference feature.
• Make sure that another handset is not in privacy mode.
The Room Monitor feature does
not work.
• Make sure to place the handset(s) within the range of the base.
• Make sure that Room Monitor feature is turned on.
• Make sure the base unit is plugged in.
The answering machine does not • Make sure that the answering machine is turned on.
• Make sure that the message record time is not set to Announce only
work.
(see page 74).
• The incoming messages may be too long. Remind callers to leave a brief message.
• The memory maybe full. Delete some or all of the saved message.
There is no sound on the base
unit or handset speaker during
call monitoring or message
playback.
• Adjust the speaker volume on the base unit or handset.
• Make sure the call screen feature is set to on.
www.uniden.com
Tr o ub l e s h oo t i n g [ 9 0 ]
Tr o u b le s h o o t i n g
Messages are incomplete.
Symptom
Suggestion
• Make sure you are using the correct PIN number.
Cannot access remote call-in
features from another touchtone • Make sure that the touch-tone phone you're using can transmit the tone for at least two seconds. If
it cannot, you may have to use another phone to access your phone.
phone.
Time stamp cannot be heard.
• Make sure you have set the time (see "Setting Date and Time" on page 28).
Bluetooth Troubleshooting
Symptom
Unable to pair headset and/or
mobile phone to my ELBT595/
ELBT585/ELX500
[91] Troubleshooting
Suggestion
• Make sure your device is Bluetooth enabled.
• Make sure the cordless handset has Bluetooth feature set to ON and not OFF.
• Confirm correct PIN Code is being entered.
• Pairing methods may vary by per mobile phone. First try pairing with Search
Device mode. The
device may seem connected, but when you try using, it doesn’t work. In this case, try the second
option, F i nd Me mode.
• Make sure your mobile phone is still registered to the base unit. Review paired devices under Select
Mobile option at base unit.
• Make sure your mobile supports Hands Free Profile (HFP).
• Make sure your Bluetooth headset supports Headset Profile (HSP).
www.uniden.com
Symptom
Suggestion
• Make sure your Bluetooth headset is in close range of the cordless handset it’s paired with.
• Make sure your mobile phone is in close range of the main base unit. (In theory, you have a range of
30 feet /10 meters line of sight. Walls or other intervening objects may require you to move closer to
the base).
Unable to make or receive calls • Make sure the Auto Answer feature on your Bluetooth mobile phone is turned off. If AutoAnswer is
On, your mobile may answer the call and interrupt your ELBT595. If this happens, the ELBT595 will
using Bluetooth headset and/or
place the call on hold.
mobile phone.
• Register only one Bluetooth device to your ELBT595 and try again.
• Make sure your mobile supports Hands Free Profile (HFP).
• Make sure your Bluetooth headset supports Headset Profile (HSP).
• Deregister your Bluetooth headset or mobile phone, and register it again.
Unable to hear any voice.
Tr o ub l e s h oo t i n g [ 9 2 ]
Tr o u b le s h o o t i n g
www.uniden.com
• Check to see if your Bluetooth mobile phone requires a special setting to let you talk while the
mobile phone is on hook (for example, the Sony Ericson T610/T637/616 requires a special setting).
System Reset
De-register the Handset
1) Press and hold end and # for more than 5 seconds. Select De r eg is t er
2) The phone will ask you to confirm the deregistration. Select Y es .
HS .
5[UVGO4GUGV
&GTGIKUVGT*5
4GRNCEKPI$CUG
When the base information is deleted, the handset displays
M U ST p la c e h an d se t in ba s e t o re g is te r ! M o de l s m ay v ar y , r e fe r t o Ow n er s Ma nu a l
f o r h el p . Re-register the handset to the base (see page 13).
5'.'%6
Replacing the Base Setting
1) Press and hold end and # for more than 5 seconds. Select Replacing Base.
R e pl a ci n g Ba s e appears.
2) Select Y es .
3) You will hear a confirmation tone. The base information will be deleted.
5[UVGO4GUGV
&GTGIKUVGT*5
4GRNCEKPI$CUG
5'.'%6
When the base information is deleted, the handset displays
M U ST pl ac e ha nd se t in ba s e t o r eg i st er ! M o de ls ma y va ry , re fe r t o Ow ne rs M an ua l f o r
h e lp . Re-register the handset to the base (see page 13).
4GRNCEKPI$CUG
;GU
0Q
5'.'%6
[93] Troubleshooting
www.uniden.com
Moisture and liquid can damage your cordless phone. Follow the steps below if your phone gets wet:
Case
If the handset or base is exposed to moisture or
liquid, but only the exterior plastic housing is
affected.
If moisture or liquid has entered the plastic housing
(i.e. liquid can be heard in the phone or liquid has
entered the handset battery compartment or vent
openings on the base).
www.uniden.com
Action
Wipe off the liquid, and use as normal.
Handset:
1) Remove the battery cover and leave it off for ventilation.
2) Disconnect the battery pack. Leave the battery cover off and the battery pack
disconnected for at least 3 days.
3) Once the handset is completely dry, reconnect the battery pack and the battery
cover.
4) Recharge the handset's battery pack for 20 hours before using.
Base:
1) Disconnect the AC adapter from the base, cutting off electrical power.
2) Disconnect the telephone cord from the base.
3) Let dry for at least 3 days.
IMPORTANT: You must unplug the telephone line while recharging the battery
packs to avoid charge interruption.
CAUTION: DO NOT use a microwave oven to speed up the drying process. This will
cause permanent damage to the handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work, please call
our Customer Service Hotline at 1-800-297-1023.
L iq u id D am a ge [ 9 4 ]
L i q u i d Da m a g e
Liquid Damage
Precautions &
Precautions!
Before you read anything else, please observe the following:
Warning!
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage to the
unit, DO NOT expose this unit to rain or moisture.
Rechargeable Lithium Ion and Nickel-MetalHydride Battery Warning
• This equipment contains rechargeable Lithium Ion and Nickel-MetalHydride battery.
• The rechargeable batteries contained in this equipment may explode
if disposed of in a fire.
• Nickel is a chemical known to state of California to cause cancer.
• Do not short-circuit the battery.
• Do not charge the rechargeable battery used in this equipment in any
charger other than the one designed to charge this battery as
specified in the owner's manual. Using another charger may damage
the battery or cause the battery to explode.
Rechargeable Batteries Must Be Recycled or
Disposed of Properly
The exclamation point within an equilateral
is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Uniden works to reduce lead content in our PVC coated cords in our
products and accessories.
Warning!
The cords on this product and/or accessories contain lead, a chemical
known to the State of California to cause birth defects or other
reproductive harm. Wash hands after handling.
Important Safety Instructions
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury
to persons, including the following:
1. Do not use this product near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
2. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from
lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the
leak.
4. Use only the power cord and batteries indicated in this manual. Do
not dispose of batteries in a fire. They may explode. Check with
local codes for possible battery disposal instructions.
5. Do not disassemble any component of this product.
Please follow instructions for repairing, if any (e.g. battery
replacement section); otherwise do not substitute or repair any parts
of the device except as specified in this manual.
Connection to party line service is subject to state tariffs. Contact the
state public utility commission, public service commission or
corporation commission for information.
This equipment is hearing aid compatible.
SAVE THESE INSTRUCTIONS
Should you experience trouble with this equipment, please contact
Uniden customer service at 800-297-1023. If the equipment is causing
harm to the telephone network, the telephone company may request
that you disconnect the equipment until the problem is resolved.
CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions. Do not open or mutilate
the battery, and disconnect the battery before shipping this product.
The FCC Wants You To Know
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the bottom of this equipment is
a label that contains, among other information, a product identifier in
the format US:AAAEQ##TXXXX. If requested, this number must be
provided to the telephone company.
An applicable Universal Service Order Codes (USOC) certification for the
jacks used in this equipment is provided (i.e., RJ11C) in the packaging
with each piece of approved terminal equipment.
A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by the ACTA. A compliant telephone
cord and modular plug is provided with this product. It is designed to
be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In
most but not all areas, the sum of RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line,
as determined by the total RENs, contact the local telephone company.
For products approved after July 23, 2001, the REN for this product is
part of the product identifier that has the format US:AAAEQ##TXXXX.
The digits represented by ## are the REN without a decimal point (e.g.,
03 is a REN of 0.3). For earlier products, the REN is separately shown
on the label.
If this equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of
service may be required. But if advance notice isn't practical, the
telephone company will notify the customer as soon as possible. Also,
you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the
equipment. If this happens the telephone company will provide
advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
[95] Precautions & Warranty
NOTICE: According to telephone company reports, AC electrical surges,
typically resulting from lightning strikes, are very destructive to
telephone equipment connected to AC power sources. To minimize
damage from these types of surges, a surge arrestor is recommended.
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as detailed
by the owner's manual, could void your authority to operate this
product.
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Privacy of communications, may not be ensured when using this phone.
To insure the safety of users, the FCC has established criteria for the
amount of radio frequency energy various products may produce
depending on their intended usage. This product has been tested and
found to comply with the FCC’s exposure criteria. For body worn
operation, the FCC RF exposure guidelines were also met when used
with the Uniden accessories supplied or designed for this product. Use
of other accessories may not ensure compliance with FCC RF exposure
guidelines and should be avoided.
Radio Interference
Radio interference may occasionally cause buzzing and humming in
your cordless handset, or clicking noises in the base. This interference
is caused by external sources such as TV, refrigerator, vacuum cleaner,
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If
these noises continue and are too distracting, please check around
your home to see what appliances may be causing the problem. In
addition, we recommend that the base not be plugged into a circuit
that also powers a major appliance because of the potential for
interference. Be certain that the antenna on the unit is fully extended
when needed.
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving radio
signals from another cordless telephone or other source of interference.
If you cannot eliminate this type of interference, you need to change
to a different channel.
www.uniden.com
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications between the
handset and base of your cordless telephone are accomplished by
means of radio waves which are broadcast over the open airways.
Because of the inherent physical properties of radio waves, your
communications can be received by radio receiving devices other than
your own cordless telephone unit. Consequently, any communications
using your cordless telephone may not be private.
One Year Limited Warranty
LEGAL REMEDIES: This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state. This
warranty is void outside the United States of America and Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner's manual you are certain that
the Product is defective, pack the Product carefully (preferably in its
original packaging). Disconnect the battery from the Product and
separately secure the battery in its own separate packaging within the
shipping carton. The Product should include all parts and accessories
originally packaged with the Product. Include evidence of original
purchase and a note describing the defect that has caused you to
return it. The Product should be shipped freight prepaid, by traceable
means, to warrantor at:
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
Important: Evidence of original purchase is required for warranty
service.
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF
WARRANTY: Uniden warrants, for one year, to the original retail owner,
this Uniden Product to be free from defects in materials and
craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall
terminate and be of no further effect 12 months after the date of
original retail sale. The warranty is invalid if the Product is (A)
damaged or not maintained as reasonable or necessary, (B) modified,
altered, or used as part of any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) improperly installed, (D)
serviced or repaired by someone other than an authorized Uniden
service center for a defect or malfunction covered by this warranty, (E)
used in any conjunction with equipment or parts or as part of any
system not manufactured by Uniden, or (F) installed or programmed by
anyone other than as detailed by the owner's manual for this product.
STATEMENT OF REMEDY: In the event that the product does not conform
to this warranty at any time while this warranty is in effect, warrantor
will either, at its option, repair or replace the defective unit and return
it to you without charge for parts, service, or any other cost (except
shipping and handling) incurred by warrantor or its representatives in
connection with the performance of this warranty. Warrantor, at its
option, may replace the unit with a new or refurbished unit. THE
LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE
WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER,
WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR
PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do
not allow this exclusion or limitation of incidental or consequential
damages so the above limitation or exclusion may not apply to you.
www.uniden.com
Precautions & Warranty [96]
P r e ca u t i o n s & Wa r r a n t y
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs. To
minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR. If
interference is experienced, moving the cordless telephone farther
away from the TV or VCR will often reduce or eliminate the interference.
I.C. Notice
TERMINAL EQUIPMENT
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.
This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies
that registration was performed based on a Declaration of Conformity indicating that Industry Canada
technical specifications were met. It does not imply that Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The
REN assigned to each terminal equipment provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of
all the devices does not exceed five.
RADIO EQUIPMENT
The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were
met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device. "Privacy of
communications may not be ensured when using this telephone".
[97] I.C. Notice
www.uniden.com
Index
A
Animations. . . . . . . . . . . . . . . . . 37
Answering machine
Answering Mode. . . . . . . . . . . . 72
Call screen . . . . . . . . . . . . . . . 75
Message alert . . . . . . . . . . . . . 75
Security code . . . . . . . . . . . . . 73
Setting up menu . . . . . . . . . . . 73
Anykey Answer . . . . . . . . . . . . . . 25
Area code. . . . . . . . . . . . . . . . . . 29
Audio tone . . . . . . . . . . . . . . . . . 59
B
Backup battery . . . . . . . . . . . . . . . 7
Banner . . . . . . . . . . . . . . . . . . . 26
Battery
Installation. . . . . . . . . . . . . . . . 8
Replacement . . . . . . . . . . . . . . 87
Bluetooth feature
Headset
De-registering . . . . . . . . . . . 47
Handset property . . . . . . . . . 45
Reconnect . . . . . . . . . . . . . . 47
Reconnecting . . . . . . . . . . . . 44
Turning on or off . . . . . . . . . 46
Mobile
Base property. . . . . . . . . . . . 42
De-registering . . . . . . . . . . . 40
Editing . . . . . . . . . . . . . . . . 41
Registering . . . . . . . . . . . . . 38
C
Calendar . . . . . . . . . . . . . . . . . . 61
www.uniden.com
Call privacy . . . . . . . . . . . . . . . . . 26
Call screen . . . . . . . . . . . . . . . . . 75
Call transfer feature . . . . . . . . . . . 86
Call Vibrate . . . . . . . . . . . . . . . . . 33
Caller ID
Call Waiting . . . . . . . . . . . . . . . 52
CIDCW. . . . . . . . . . . . . . . . . . . 70
CWDX . . . . . . . . . . . . . . . . . . . 52
Color scheme. . . . . . . . . . . . . . . . 36
Conference . . . . . . . . . . . . . . . . . 53
D
Date & time . . . . . . . . . . . . . . . . 28
Delete ringer . . . . . . . . . . . . . . . . 35
De-registering handset . . . . . . . . . 93
Dial mode . . . . . . . . . . . . . . . . . . 30
Digital security code . . . . . . . . . . 15
DirectLink. . . . . . . . . . . . . . . . . . 83
Display Option. . . . . . . . . . . . . . . 23
Distinctive ID . . . . . . . . . . . . . . . 27
E
Earpiece volume. . . . . . . . . . . . . . 57
Expanding your phone . . . . . . . . . 12
F
Find handset . . . . . . . . . . . . . . . . 60
G
General information . . . . . . . . . . . 88
Global setup . . . . . . . . . . . . . . . . 28
H
Hands-free conversation . . . . . . . . 49
Hanging up . . . . . . . . . . . . . . . . . 51
Headset installation . . . . . . . . . . . 16
Hold . . . . . . . . . . . . . . . . . . . . . 53
Holster . . . . . . . . . . . . . . . . . . . .15
I
I.C. notice . . . . . . . . . . . . . . . . . .97
Important safety instructions . . . . .95
Intercom . . . . . . . . . . . . . . . . . . .85
K
Key touch tone. . . . . . . . . . . . . . .26
L
Language . . . . . . . . . . . . 27, 37, 75
LCD contrast . . . . . . . . . . . . . . . .25
Liquid damage . . . . . . . . . . . . . . .94
Low battery . . . . . . . . . . . . . . . . . 9
M
Making a call . . . . . . . . . . . . . . . .48
Message alert . . . . . . . . . . . . . . . .75
Mobile priority . . . . . . . . . . . . . . .24
Mute
Handset ringer . . . . . . . . . . . . .59
Microphone . . . . . . . . . . . . . . .59
O
Open to Answer . . . . . . . . . . . . . .25
Out going greeting
Choosing . . . . . . . . . . . . . . . . .76
Recording. . . . . . . . . . . . . . . . .76
Out of range . . . . . . . . . . . . . . . .51
P
Phonebook
Capacity. . . . . . . . . . . . . . . . . .68
Copying entries . . . . . . . . . . . . .67
Group . . . . . . . . . . . . . . . . . . .65
Making calls . . . . . . . . . . . . . . .69
Name. . . . . . . . . . . . . . . . . . . .64
INDEX
[98]
Number . . . . . . . . . . . . . . . . .
Sort order . . . . . . . . . . . . . . . .
Speed dial. . . . . . . . . . . . . . . .
Unique display. . . . . . . . . . . . .
Unique ring. . . . . . . . . . . . . . .
Power failure . . . . . . . . . . . . . . .
Precautions . . . . . . . . . . . . . . . .
Privacy mode . . . . . . . . . . . . . . .
R
Receiving a call . . . . . . . . . . . . .
Record ringer . . . . . . . . . . . . . . .
Record time . . . . . . . . . . . . . . . .
Recording conversation . . . . . . . .
Redialing a call . . . . . . . . . . . . . .
Register the handset . . . . . . . . . .
Reminder . . . . . . . . . . . . . . . . . .
Remote operation . . . . . . . . . . . .
Reviewing message . . . . . . . . . . .
Ring time. . . . . . . . . . . . . . . . . .
Ringer tone
Changing . . . . . . . . . . . . . . . .
Deleting . . . . . . . . . . . . . . . . .
Playing. . . . . . . . . . . . . . . . . .
Storing. . . . . . . . . . . . . . . . . .
Ringer volume
Base . . . . . . . . . . . . . . . . . . .
Handset . . . . . . . . . . . . . . . . .
Room/baby monitor. . . . . . . . . . .
S
Setting up
Answering Machine. . . . . . . . . .
Base unit . . . . . . . . . . . . . . . .
Telephone Line . . . . . . . . . . . .
[99] INDEX
64
68
65
65
64
87
95
26
50
33
74
79
56
13
61
81
78
74
34
35
34
33
Soft key . . . . . . . . . . . . . . . . . . . 20
Speaker phone. . . . . . . . . . . . . . . 49
Speaker volume
Base . . . . . . . . . . . . . . . . . . . . 57
Handset . . . . . . . . . . . . . . . . . 59
Storing a caller ID or redial number 66
System setup. . . . . . . . . . . . . . . . 24
T
Tone dial . . . . . . . . . . . . . . . . . . 60
Transferring a call . . . . . . . . . . . . 86
Troubleshooting. . . . . . . . . . . . . . 89
U
Uniden’s Cordless Telephone
Customization Tool. . . . . . . . . . . . 17
Unique ID . . . . . . . . . . . . . . . . . . 27
Unique ring. . . . . . . . . . . . . . . . . 32
V
Vibrate All . . . . . . . . . . . . . . . . . 32
W
Wallpaper . . . . . . . . . . . . . . . . . . 35
Warranty. . . . . . . . . . . . . . . . . . . 96
57
58
84
73
10
10
www.uniden.com
Remote Operation Card
CUT
CUT
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access away from
home
Turn on the answering
system remotely
Remote access away from
home
Turn on the answering
system remotely
1. Call your phone number from a
touch-tone phone.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
1. Call your phone number from a
touch-tone phone.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
CUT
CUT
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access away from
home
Turn on the answering
system remotely
Remote access away from
home
Turn on the answering
system remotely
1. Call your phone number from a
touch-tone phone.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
1. Call your phone number from a
touch-tone phone.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
www.uniden.com
[100]
CUT
Task
Repeat a Message
Playing incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help Guidance
CUT
Key
CUT
Task
Repeat a Message
Playing incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help Guidance
[101]
Task
Repeat a Message
Playing incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help Guidance
Key
CUT
Key
Task
Repeat a Message
Playing incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help Guidance
Key
www.uniden.com
At Uniden, we'll take care of you!
Thank you for purchasing a Uniden product. If you have any questions or problems,
please do not return this product to the place of purchase.
Having Trouble?
Our customer care specialists are here to help you! Visit our website at www.uniden.com or call
our customer hotline at 1-800-297-1023, Mon-Fri, 7 a.m. to 7 p.m. or Sat/Sun, 9 a.m. to 5
p.m. CST. (Phone support is closed on holidays.)
Need a Part?
To order headsets, additional handsets, replacement batteries or other accessories, visit
our website at www.uniden.com or call 1-800-554-3988, Mon-Fri, 8 a.m. to 5 p.m. CST.
p
Help for our Special Needs Customers
If you need special assistance due to a disability or have questions on the accessibility
features of this product, please call 1-800-874-9314 (voice or TTY)
May be covered under one or more of the following U.S. patents:
4,797,916 5,381,460 5,426,690 5,434,905 5,491,745 5,493,605
5,533,010 5,574,727 5,581,598 5,650,790 5,660,269 5,661,780
5,663,981 5,671,248 5,696,471 5,717,312 5,732,355 5,754,407
5,758,289 5,768,345 5,787,356 5,794,152 5,801,466 5,825,161
5,864,619 5,893,034 5,912,968 5,915,227 5,929,598 5,930,720
5,960,358 5,987,330 6,044,281 6,070,082 6,125,277 6,253,088
6,314,278 6,418,209 6,618,015 6,671,315 6,714,630 6,782,098
6,788,920 6,788,953
Other patents pending.
R
IE
S,
M
@
E CO
SO IN
.
S
E NL EN
D
CC
A O O NI
.U
G
W
W
W
FO
R
R E G I S T E R O N L I N E T O D AY !
T H A N K Y O U F O R B U Y I N G A U N I D E N P R O D U C T.
©2005 Uniden America Corporation, Fort Worth, Texas. Contains additional foreign articles. Custom manufactured in China.
UPZZ01744BZ