BFD65W
DISHWASHER
BAUMATIC BDW01W/SS dishwasher user manual
BFD65W DISHWASHER
60 CM FULL HEIGHT DISHWASHERS
IMPORTANT!
PLEASE READ THIS MANUAL AND KEEP IT FOR FUTURE REFERENCE!
THIS MANUAL CONTAINS SECTIONS OF SAFETY INSTRUCTIONS,
OPERATING INSTRUCTIONS & TROUBLESHOOTING TIPS, ETC.
HT MOD
1 31/07/06
1
BAUMATIC BFD65W dishwasher user manual
2
CONTENTS
•
SAFETY FIRST!
SAFETY INFORMATION .……………..…………3
*Please read this before using your dishwasher!
BEFORE CALLING
FOR SERVICE
•
KNOWING YOUR
DISHWASHER
CONTROL PANEL ………………………..……..…4
DISHWASHER FEATURES …………..………….4
REVIEWING THE SECTION ON
TROUBLESHOOTING TIPS WILL
HELP YOU SOLVE SOME
COMMON PROBLEMS WITHOUT
THE NEED TO ASK FOR HELP
FROM PROFESSIONAL
TECHNICIANS.
•
USING YOUR
DISHWASHER
WATER SOFTENER …………………..………...5-6
DETERGENT ………………..............................6
RINSE AID ………………….............................7
LOADING YOUR DISHWASHER…..….......8-11
STARTING A WASH CYCLE ……………….12-13
UNLOADING AT THE END OF A CYCLE…....13
FILTERING SYSTEM ………………..…….…….14
CLEANING AND MAINTAINING
YOUR DISHWASHER …………………….…15-17
•
PLEASE NOTE:
THE MANUFACTURER
RESERVES THE RIGHT TO MAKE
MODIFICATIONS TO PRODUCTS
WITHOUT GIVING PRIOR
NOTICE.
BEFORE YOU CALL FOR
SERVICE…
TROUBLESHOOTING ………………….…16-19
ERROR CODES ………………………………….…20
•
MISCELLANEOUS
HOW TO INSTALL ……….…….…..……....21-25
FINAL CHECKLIST BEFORE STARTING…….26
CONDITIONS OF GUARANTEE………………..27
CONTACT DETAILS…………………………..…..28
2
BAUMATIC BFD65W dishwasher user manual
3
IMPORTANT SAFETY INFORMATION
READ BEFORE USING!
CHILD SAFETY
ELECTRICAL SAFETY
•
•
NOTE - This appliance must be grounded. In
the event of a malfunction or breakdown,
grounding will reduce the risk of electric
shock by providing a path of least resistance
of electrical current. You will be able to tell if
it is because a non-grounded appliance will
give off an electrical discharge.
•
Manufacturer declines all responsibility for
any damage due to non-grounding of
appliance.
•
DURING THE GUARANTEE PERIOD ONLY BAUMATIC
SERVICE ENGINEERS OR AN AUTHORISED AGENT
OF BAUMATIC SHOULD CARRY OUT REPAIRS ON
THIS UNIT.
DO NOT USE IF THE SUPPLY CORD IS DAMAGED.
FOR INSTALLATION PROCEDURE PLEASE CONSULT
PAGES 24 – 29.
•
•
•
•
•
•
DO NOT ABUSE OR FORCE THE
DISHWASHER. DO NOT SIT ON OR STAND
ON ITS DOOR OR DISH RACKS – TIPPING
HAZARD.
KEEP CHILDREN AWAY FROM DETERGENT,
RINSE AID AND THE OPEN DOOR OF THE
DISHWASHER AS THERE COULD BE
DETERGENT LEFT INSIDE.
SUPERVISE YOUNG CHILDREN TO ENSURE
THEY DO NOT PLAY WITH THE APPLIANCE.
SUPERVISE INFIRM PERSONS IF THEY MUST
USE THE APPLIANCE.
REMOVE THE DOOR TO WASHING
COMPARTMENT OF YOUR OLD APPLIANCE
BEFORE DISCARDING IT.
DURING USE
•
•
BEFORE USING
SOME ITEMS ARE UNSUITABLE FOR WASHING
IN YOUR DISHWASHER. PLEASE SEE PAGE 8 FOR A LIST
OF THESE ITEMS.
DO NOT TAMPER WITH THE CONTROLS.
WHEN LOADING ITEMS TO BE WASHED:
1) Keep sharp items like knives away from the door
seal.
2) Load sharp knives with the handles up to prevent
injuries.
•
•
ONLY USE AUTOMATIC DISHWASHER
DETERGENT, NOT SOAP OR LAUNDRY DETERGENT.
NEVER USE SOLVENTS AS THIS COULD RESULT IN AN
EXPLOSION!
•
DO NOT TOUCH THE HEATING ELEMENT
DURING OR IMMEDIATELY AFTER USE.
DO NOT USE YOUR DISHWASHER UNLESS
ALL ENCLOSURE PANELS ARE PROPERLY
IN PLACE. OPEN THE DOOR VERY
CAREFULLY IF THE DISHWASHER IS
OPERATING. THERE IS A RISK OF WATER
SQUIRTING OUT.
AFTER USE
ALWAYS KEEP THE DOOR CLOSED TO AVOID DANGER
OF TRIPPING.
CHECK THAT THE DETERGENT DISPENSER IS EMPTY
AFTER COMPLETION OF WASH CYCLE.
IF LEAVING UNUSED FOR A LONG TIME,
DISCONNECT THE WATER SUPPLY (SEE PP. 17, 26).
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY BEFORE
USING YOUR DISHWASHER FOR THE FIRST TIME!
3
1.
2.
3.
4.
5.
6.
7.
Pre- Rinse light: To come on when Pre-Rinse is needed
Wash Light: Comes on when washing
Rinse Light: Comes on when rinsing
Drying Light: Comes on when drying
Power Light: To come on when the ON/OFF Button is pressed down
ON/OFF BUTTON: To turn on/off the Power Supply.
Rinse Aid Warning Light: To come on when the dispenser needs to be
refilled
8. Salt Warning Light: To come on when the softener needs to be refilled
9. Washing Program Selector: Turn the knob clockwise to select wash
cycles
10.Start/Pause Button: Press this button to start or pause the
dishwasher, th eprocess pilot lamp will come on when starting
4
5
BAUMATIC BFD65W dishwasher user manual
Note on chemicals used by the dishwasher
•
Your dishwasher is equipped with an adjustable rinse aid and salt container. Using individual detergents,
rinse aid and salt will give the best possible results as this will give the correct dosage of each chemical to
suit your needs. Using Two-in-One or Three-in-One tablets may not give the best results when used in
your appliance, and may not be suitable for the type of water supply in your home, as they contain predetermined quantities of salt, rinse aid and detergent and cannot be adjusted to the individual
requirements.
If you are going to use 3-in-1 (or 2-in-1) tablets, we suggest that you contact the manufacturer before use
or if you experience poor results in the wash performance and ask for assistance from them.
WARNING!
ONLY USE DISHWASHER SALT IN YOUR
DISHWASHER.
WATER
SOFTENING
FEATURE
NOTE:
If 3-in1 tablets are used with the machine
then set the salt dispenser to the minimum
setting. THESE TABLET TYPES ALREADY
CONTAIN SALT AND/OR RINSE AID.
If the salt or rinse aid dispenser is set at a high
level in a cycle involving 2-in-1, 3-in-1or 4-in-1
tablets then this will result in overdosing of
individual chemicals and affect the quality of the
finished wash. It could also cause overflowing of
water and suds. A white residue may also be
deposited on utensils.
Please note: Rinse aid should still be used. To
achieve better results in the drying cycle please
use appropriate amount:( see page 7)
THE LIME IN HARD WATER MAKES DEPOSITS FORM ON
DISHES AND UTENSILS. YOUR DISHWASHER HAS A
SPECIAL SOFTENING FEATURE THAT USES SALT
SPECIFICALLY DESIGNED TO ELIMINATE LIME AND
MINERALS FROM THE WATER.
LOADING SALT INTO THE SALT CONTAINER
•
REMOVE THE LOWER BASKET & THEN
UNSCREW AND REMOVE THE CAP
FROM THE SALT CONTAINER.
•
IF YOU ARE FILLING THE CONTAINER
FOR THE FIRST TIME, FILL WITH
APPROX. 1 LITRE OF WATER.
•
PLACE THE END OF THE SUPPLIED
FUNNEL INTO THE HOLE & ADD 1.2 Kg
OF SALT. NOTE: IT IS NORMAL FOR A
SMALL AMOUNT OF WATER TO COME
OUT OF THE CONTAINER.
5
BAUMATIC BFD65W dishwasher user manual
6
SETTING THE WATER SOFTENER LEVEL
YOU CAN ADJUST THE AMOUNT OF SALT USED BY THE DISHWASHER TO SOFTEN WATER TO GET
THE BEST WASHING RESULTS, BASED ON THE HARDNESS OF WATER IN YOUR AREA.
2
THERE IS A RING ON THE NECK OF THE
CONTAINER. ROTATE THE RING IN AN
ANTICLOCKWISE DIRECTION FROM THE “-”
SETTING TOWARDS THE “+” SETTING
ACCORDING TO THE HARDNESS OF WATER
IN USE. SEE TABLE BELOW.
NOTE
1
1. THE SALT CONTAINER MUST BE REFILLED WHEN THE
SALT WARNING LIGHT COMES ON. ALTHOUGH THE
SALT CONTAINER MAY BE FULL, THE INDICATOR LIGHT
MAY NOT GO OUT UNTIL THE SALT HAS DISSOLVED.
2. IF THERE ARE SALT SPILLS, A SOAK PROGRAM CAN
BE RUN TO WASH AWAY SPILLAGE BEFORE USING THE
MACHINE.
WARNING:SPILLAGE OF SALT AROUND THE NECK CAN
LEAD TO RUST, ENSURE YOU RINSE AWAY AFTER
LOADING
UNSCREW THE CAP FROM THE SALT
CONTAINER.
ADJUSTMENTS SHOULD BE MADE ACCORDING TO THE TABLE BELOW:
DETERGENT “How much do I use?”
To OPEN the DETERGENT DISPENSER DOOR, use the CATCH on its LOWER SIDE.
*NOTE: SEE P.13 – WASH CYCLE TABLE for AMOUNT of DETERGENT to use.
NOTE:
•
ALWAYS CHECK THE WASH CYCLE TABLE
FOR DOSAGE ADVICE. NEVER OVERFILL
THE DISPENSER.
•
DO NOT OVERDOSE TO PREVENT THE
FORMATION OF DEPOSITS (THE WATER
SOFTENING FEATURE ALREADY TAKES CARE
OF THIS!).
THE HARDER YOUR WATER, THE MORE DETERGENT
YOU MAY NEED. ADJUST THE DOSE JUST BY SMALL
AMOUNTS UNTIL YOU FIND THE CORRECT AMOUNT
OF DETERGENT TO USE.
6
BAUMATIC BFD65W dishwasher user manual
RINSE AID
7
•
THE RINSE AID IS RELEASED DURING THE
FINAL RINSE TO PREVENT WATER FROM
FORMING DROPLETS ON YOUR DISHES
THAT CAN CAUSE SPOTS AND STREAKS. IT
ALSO IMPROVES DRYING BY ALLOWING
WATER TO FALL OFF THE DISHES.
•
YOUR DISHWASHER IS DESIGNED TO USE
LIQUID RINSE AIDS. THE RINSE AID
DISPENSER CAN BE FOUND INSIDE THE
DOOR NEXT TO THE DETERGENT
DISPENSER. TO FILL THE DISPENSER, OPEN
THE CAP AND POUR THE RINSE AID INTO
THE DISPENSER UNTIL THE LEVEL
INDICATOR TURNS COMPLETELY BLACK.
THE DISPENSER HOLDS ABOUT 100ML OF
LIQUID RINSE AID.
•
•
TO OPEN THE DISPENSER, TURN THE CAP TO
THE ‘OPEN’ (LEFT) ARROW AND LIFT IT OUT.
•
POUR THE RINSE AID INTO THE DISPENSER.
BE CAREFUL NOT TO OVERFILL.
•
REPLACE CAP BY INSERTING IT ALIGNED WITH
‘OPEN’ ARROW & TURN IT TO THE CLOSED
(RIGHT) ARROW.
BE CAREFUL NOT TO OVERFILL THE
DISPENSER – THIS COULD CAUSE
FROTHING. WIPE AWAY SPILLS WITH A
DAMP CLOTH. DON’T FORGET TO REPLACE
THE CAP BEFORE YOU CLOSE THE
DISHWASHER DOOR.
NOTE: IF YOU HAVE SOFT WATER, YOU MAY NOT
NEED RINSE AID FOR IT MAY CAUSE A WHITE FILM
TO DEVELOP ON YOUR DISHES.
ADJUSTING THE RINSE AID DISPENSER
•
As with detergent, the amount of rinse
aid needed for your dishes depends on
the hardness of the water in your area.
Too much rinse aid can result in
foaming and cause cloudiness or
streaks on your dishes. If your water
is very soft, you may not need rinse
aid. You can always dilute the rinse
aid with an equal amount of water.
The rinse aid dispenser has six settings. ALWAYS START WITH THE DISPENSER SET ON “1”. IF SPOTS & POOR
DRYING ARE A PROBLEM, INCREASE THE AMOUNT OF RINSE AID DISPENSED BY REMOVING THE DISPENSER
LID AND ROTATING THE DIAL TO “2”. IF THE DISHES ARE STILL NOT DRYING PROPERLY OR ARE SPOTTED,
ADJUST THE DIAL TO THE NEXT HIGHER NUMBER UNTIL YOUR DISHES ARE SPOT-FREE.
***NOTE: Please read the notes for detergent use on p. 12.
WHEN TO REFILL THE RINSE
AID DISPENSER - If the rinse aid
warning light (SEE control panel) is not on, you
can judge the rinse aid level by looking at the
black dot on the rinse aid dispenser. As the
rinse aid level decreases, the black dot shrinks.
Never let the rinse aid get below ¼ full.
7
BAUMATIC BFD65W dishwasher user manual
LOADING
YOUR
DISHWASHER
8
NOTE:
FOR BEST PERFORMANCE, FOLLOW THESE
LOADING GUIDELINES. FEATURES AND
APPEARANCE OF RACKS & CUTLERY
BASKETS MAY VARY FROM YOUR MODEL.
BEFORE LOADING!
•
•
REMOVE ALL SCRAPS OF FOOD.
•
EMPTY DRINKS & LIQUIDS FROM CUPS.
SOFTEN BURNT-ON FOOD IN PANS BY SOAKING.
DO NOT PUT THESE ITEMS IN YOUR DISHWASHER:
•
BRONZE
CUTLERY
•
SAUCEPANS
WITH
WOODEN
HANDLES
•
•
CUTLERY
WITH
WOODEN,
HORN, CHINA
OR MOTHER
OF PEARL
HANDLES
PLASTIC
ITEMS THAT
ARE NOT HEAT
RESISTANT
•
•
•
•
OLDER
CUTLERY
WITH GLUED
PARTS
BONDED
CUTLERY
ITEMS OR
DISHES
•
STEEL ITEMS
SUBJECT TO
RUSTING
•
WOODEN
PLATTERS
•
ITEMS MADE
FROM
SYNTHETIC
FIBRES (eg.
SPONGES)
•
DELICATE,
REPAIRED OR
PAINT /
PATTERN
OVERLAID
CHINA
PEWTER OR
COPPER ITEMS
LEAD CRYSTAL
GLASS
Note:
Do not wash stainless steel and silver cutlery together. Iron objects can rust
and stain other items. Aluminium tends to go black. Copper, pewter & brass
stain.
8
BAUMATIC BFD65W dishwasher user manual
9
HOW TO USE THE UPPER RACK
THE UPPER RACK IS FOR MORE DELICATE
AND
LIGHTER
DISHWARE
SUCH
AS
GLASSES, COFFEE & TEA CUPS, SAUCERS,
PLATES, BOWLS, AND SHALLOW PANS
(PROVIDED THESE ARE NOT TOO DIRTY).
POSITION THE DISHES AND
COOKWARE SO THAT THEY DO NOT
GET MOVED BY THE SPRAY OF
WATER. ALWAYS PLACE GLASSES,
CUPS & BOWLS UPSIDE DOWN.
HEIGHT ADJUSTMENT:
NOTE: YOUR DISHWASHER COMES
WITH AN ADJUSTABLE TOP RACK
(BASKET) – PICTURED AT RIGHT.
ITS HEIGHT CAN BE ADJUSTED BY
UNDOING THE FRONT RAIL CLIPS,
REMOVING THE RACK COMPLETELY
AND LATCHING THE WHEELS OF THE
LOWER LEVEL (POSITION ‘1’ IN THE
FIGURE ON THE RIGHT) OR THE
HIGHER LEVEL (POSITION ‘2’ IN THE
FIGURE ON THE RIGHT) IN THE
GROOVE OF THE RAIL.
1
2
LOADING GUIDE (UPPER RACK):
4
5
3
1
2
7
6
1.
2.
3.
4.
5.
6.
7.
9
Cups
Small serving bowls
Large Serving Bowls
Glasses
Saucers
Dishes
Dessert dishes
BAUMATIC BFD65W dishwasher user manual
10
***NOTE***: THE UPPER RACK HAS
SIDE FLAPS (PICTURED AT LEFT ABOVE BASKET).
THERE ARE 4 (2 ON EACH SIDE).
THESE CAN BE ADJUSTED INTO 2
POSITIONS = POSITION 1 (HIGH)
AND POSITION 2 (LOW).
TO MOVE THE FLAPS BETWEEN THESE
POSITIONS, FIND THE LARGE HINGES
CLASPING EACH FLAP TO THE UPPER
RACK. THERE ARE TWO OF THESE AT
EITHER END OF EACH FLAP. GENTLY PULL
BOTH CLASPS OFF THE WIRE RACK AND
MOVE THE FLAP TO THE DESIRED
POSITION. BE CAREFUL IF YOU HAVE
LONG FINGERNAILS!
POSITION 1
THE UPPER POSITION WILL ACCOMMODATE ITEMS SUCH AS GLASS TUMBLERS
(PLACED BENEATH FLAP) AND WINE GLASSES. WINE GLASSES CAN BE PLACED
UPSIDE DOWN SO THAT THE NECK NESTLES SNUGLY IN THE GROOVES AT SIDE OF
FLAP WITH THE BASE OF THE GLASS FACING UPWARD.
POSITION 2
WHEN THE FLAPS ARE MOVED TO THE LOWER POSITION, THEY CAN BE USED TO
HOLD ADDITIONAL TUMBLERS, CUPS AND MUGS. ALWAYS CHECK THAT YOU ARE
ONLY PLACING ITEMS ON THE FLAPS THAT WILL CLEAR THE CEILING HEIGHT OF
YOUR DISHWASHER WHEN YOU PUSH THE RACK BACK IN. BE PARTICULARLY
CAREFUL WITH LONG-STEMMED GLASSWARE SUCH AS CHAMPAGNE GLASSES –
BREAKAGE HAZARD!
HOW TO LOAD THE LOWER RACK:
PLACE LARGE ITEMS THAT ARE HARD TO CLEAN IN THE LOWER RACK: eg. POTS, PANS,
LIDS, SERVING DISHES, BOWLS.
8
9
10
11
Oval platter
Soup plates
Dessert dishes
Silverware basket
11
•
•
•
POTS, SERVING BOWLS, ETC. MUST ALWAYS BE PLACED UPSIDE DOWN.
DEEP POTS SHOULD BE SLANTED TO LET WATER FLOW OUT.
THE BOTTOM RACK FEATURES FOLD DOWN BASKETS SO THAT LARGER OR MORE POTS
& PANS CAN BE LOADED.
10
11
BAUMATIC BFD65W dishwasher user manual
CUTLERY BASKET
CUTLERY SHOULD BE PLACED IN THE CUTLERY BASKET WITH HANDLES ALWAYS POINTING
DOWNWARD (AT THE BOTTOM). VERY LONG UTENSILS (LADLES, etc.) SHOULD BE PLACED
HORIZONTALLY AT THE FRONT OF THE UPPER RACK.
4 1
4 1
4 1
4 1
4 1
4 1
4 1
4 1
4 1
4 1
4 1
4 1
5 3
5
5 3
5 3
5
5 3
5 3
5
5 3
5 6
5
5 7
1
2
3
4
3 2
2
3 2
3 2
2
3 2
3 2
2
3 2
Forks
Soup spoons
Dessert spoons
Teaspoons
8 2
2
6 2
5
6
7
8
Knife
Serving spoon
Gravy ladle
Serving fork
Do not let any item extend through bottom.
NOTE:
•
WHEN YOU ARE SATISFIED YOU HAVE LOADED ALL THE UTENSILS
AND DISHES YOU WANT TO WASH AND HAVE ADDED THE PROPER
AMOUNT OF DETERGENT TO THE DISPENSER (REMEMBER TO CHECK THE
TABLE ON PAGE 13 FOR THE DOSE THAT’S RIGHT FOR THE WASHING CYCLE YOU
WANT), ENSURE THE RACKS ARE PUSHED ALL THE WAY BACK INTO
YOUR DISHWASHER AND CLOSE THE DOOR.
•
YOU ARE NOW READY TO START A WASH CYCLE (SEE NEXT PAGE).
11
STARTING A WASH CYCLE
1. Draw out the lower and upper basket, load the dishes and push them back. It
is recommended to load the lower basket first, then the upper one (see the
section entitled “LOADING THE DISHWASHER”).
2. Pour in the detergent (see the section entitled : “USING YOUR
DISHWASHER” )
3. Ensure the door is properly closed. NOTE: A click can be heard when the door
is closed perfectly.
4. Insert the plug into the socket.
The power supply is 220-240VAC 50HZ, the specification of the socket is 12A 250
VAC. Make sure that the water supply is turned on to full pressure.
5. Press the ON/OFF button.
6. Turn the knob located on the right of the control panel in a clockwise direction
and select the desired Program.
7. Press the START/PAUSE button to start the washing.
CHANGE THE PROGRAMME
NOTE: A program can be changed only before the detergent has been released.
Otherwise, you must refill the detergent dispenser.
1. Please press the START button for more than three seconds
2. Turn around the program knob to select the desired program.
3. Press the START button to start washing.
NOTE: If you open the door when washing, the machine will pause. When you close
the door and press the START/PAUSE button, the machine will keep on working
after 10 seconds.
NOTE: If all lights begin to flicker, that indicates the machine is out of order, please
turn off the main power and water supply before calling a service.
12
BAUMATIC BFD65W dishwasher user manual
13
FILTERING SYSTEM
FOR YOUR CONVENIENCE, WE HAVE PLACED THE FILTERING SYSTEM WITHIN EASY REACH INSIDE THE
TUB. THE FILTER REMOVES BITS OF FOOD TRAPPED IN THE FILTER FROM THE WASH WATER SO IT CAN BE
RECIRCULATED DURING THE CYCLE. THERE ARE THREE PARTS TO THE FILTERING SYSTEM: 1) The Main Filter,
2) The Coarse Filter & 3) The Fine Filter.
1 MAIN FILTER
Food and soil particles trapped by this filter are
pulverized by a special jet on the lower spray arm and
washed down the drain.
2 COARSE FILTER
Larger items, such as pieces of bone or glass that could
clog the drain are trapped in the coarse filter. To
remove an item caught in this filter, gently squeeze
the tabs on top of this filter and lift it out.
3 FINE FILTER
This filter holds soil and food residue in the sump area
and prevents it from being re-deposited on the dishes
during a cycle.
Caring for your Dishwasher
CLEANING THE OUTSIDE SURFACES OF YOUR APPLIANCE
•
TO CLEAN THE EXTERIOR OF YOUR DISHWASHER (INCLUDING THE CONTROL PANEL), USE A LIGHTLY
DAMPENED CLOTH THEN DRY THOROUGHLY. NEVER USE SHARP OBJECTS, SCOURING PADS OR
HARSH CLEANERS ON ANY PART OF THE APPLIANCE. SOME PAPER TOWELS CAN SCRATCH.
•
TO CLEAN THE EDGE AROUND THE DOOR,
ONLY EVER USE A SOFT WARM, DAMP RAG.
DO NOT USE A SPRAY CLEANER HERE OR
WHEN CLEANING THE DOOR PANEL AS THIS
MAY HARM THE DOOR LOCK AND
ELECTRICAL PARTS.
CLEANING THE SPRAY ARMS
THE SPRAY ARMS NEED REGULAR CLEANING AS HARD WATER RESIDUES WILL CLOG THEIR
JETS & BEARINGS. TO REMOVE THE SPRAY ARM, SCREW OFF THE NUT TO TAKE OUT THE
WASHER ON TOP OF THE SPRAY ARM AND REMOVE THE ARM. WASH THE ARMS IN SOAPY
WARM WATER & USE A SOFT BRUSH TO CLEAN THE JETS. REPLACE THE SPRAY ARM AFTER
RINSING IT THOROUGHLY.
13
BAUMATIC BFD65W dishwasher user manual
14
CLEANING THE FILTERS
•
THE FILTER ASSEMBLY MUST BE KEPT CLEAN FOR BEST PERFORMANCE. You should remove the
larger bits of food trapped in the filter after each wash cycle by rinsing the semicircular filter and
cup under running water. To remove the filter assembly, pull up on the cup handle.
•
The entire filter assembly should be cleaned at least once a month.
•
To clear the coarse filter and the fine filter, use a cleaning brush. Then, reassemble the filter parts
as shown in the figure above and reinsert the entire assembly in the dishwasher in its seat & press
downward to secure it.
•
Improper replacement of the filter may impair appliance performance and damage dishes and
utensils.
• Warning - never run the dishwasher without the filters
in place!
• Warning - Before cleaning the inner cavity of the appliance
always allow 30 minutes for the Element to cool down to
avoid injury!
14
BAUMATIC BFD65W dishwasher user manual
15
HOW TO KEEP YOUR DISHWASHER IN SHAPE
AFTER EVERY WASH, leave the door slightly ajar so that moisture and odours are not trapped
inside.
REMOVE THE PLUG before cleaning or performing maintenance. Never run the risk of electric
shocks.
DO NOT USE SOLVENTS OR ABRASIVE CLEANING AGENTS to clean the exterior and the rubber
parts of the dishwasher. Only use a cloth and warm soapy water. To remove spots or stains
from the surface of the interior, use a cloth dampened with water and a little white vinegar,
or a cleaning product made specifically for dishwashers.
WHEN YOU GO ON HOLIDAY, run a wash cycle with the dishwasher empty. Then unplug it, turn
off the water supply and leave the door slightly ajar to prevent odours and mould from
developing.
MOVING THE APPLIANCE is possible but KEEP IT UPRIGHT.
SEALS can trap food, which in turn will cause odours. Periodic cleaning with a damp cloth or
sponge will prevent this from becoming a problem.
PROTECTING YOUR DISHWASHER AGAINST FREEZING
If your dishwasher is left in an unheated place during the winter, ask a
service technician to:
1) Cut off electrical power to the dishwasher. Remove fuses or trip circuit
breaker.
2) Turn off the water supply and disconnect the water inlet pipe from the water
valve & discharge hoses.
3) Drain water from the inlet pipe and water valve (Use a pan to catch the
water).
4) Reconnect the water inlet pipe to the water valve.
5) Remove the plastic sump cover in the tub bottom and use a sponge to soak
up water in the rubber boot.
15
BAUMATIC BFD65W dishwasher user manual
16
BEFORE YOU CALL FOR SERVICE …
CHECKING AGAINST THE CHARTS BELOW MAY FIX YOUR PROBLEM.
PROBLEM
Dishwasher
doesn’t run!
Drain Pump
doesn’t stop!
POSSIBLE CAUSES
•
Fuse blown, or the
circuit breaker acted
•
Power supply is not
turned on
•
Water pressure is low
•
Overflow
•
Some audible sounds
are normal
•
Utensils are not secure
in the baskets or
something small has
dropped into the
basket and is loose
Noise!
•
Motor Hums
16
WHAT TO DO
•
Replace fuse or reset circuit
breaker.
•
Remove any other appliances
feeding from the same socket as
the dishwasher.
•
Make sure the dishwasher is turned
on and the door is closed securely.
•
Check that the water supply is
connected properly and the water is
turned on.
•
The system is designed to detect an
overflow. When it does, it shuts off
the circulation pump and turns on
the drain pump. Call a Baumatic
Ltd approved technician.
•
Sound from soft food shredding
action and detergent cup opening.
This is not a problem.
•
Ensure everything is placed
securely in the dishwasher.
•
Dishwasher has not been used
regularly. If you do not use it
often, remember to set it to fill and
pump out every week. (See Wash
Cycle table). This will help keep the
seal moist.
BAUMATIC BFD65W dishwasher user manual
PROBLEM
Suds in the Tub!
POSSIBLE CAUSES
17
WHAT TO DO
•
Use only special dishwasher
detergent to avoid suds.
•
Always wipe up rinse agent spills
immediately.
Detergent with
colorant was used
•
Make sure you use detergent
without colorant.
•
Rinse agent dispenser
is empty
•
Make sure that the rinse agent
dispenser is filled.
•
Improper program
•
Select stronger program.
•
Improper rack loading
•
Make sure there are no large dishes
blocking the action of the detergent
dispenser and the spray arms.
•
Improper detergent
•
Spilled rinse agent
•
Stained tub
Interior!
Dishes are not
dried!
Dishes and
Flatware not
Clean!
To remove spots from glassware:
Spots and Filming
on Glasses and
Flatware!
•
•
•
•
•
•
•
Extremely hard water
Low inlet temperature
Overloading the
dishwasher
Improper loading
Old or damp powder
detergent
Empty rinse agent
dispenser
Incorrect dosage of
detergent
17
1. Take all metal utensils out of the
dishwasher.
2. Do not add detergent.
3. Choose the longest cycle.
4. Start the dishwasher and let it to run for
18 - 22 minutes, then it will be in the main
wash.
5. Open the door and pour 2 cups of white
vinegar into the bottom of the dishwasher.
6. Close the door and let the dishwasher
complete the cycle.
7. If the vinegar does not work, repeat as
above, only use ¼ cup (60ml) of citric acid
crystals instead of vinegar.
BAUMATIC BFD65W dishwasher user manual
PROBLEM
Cloudiness on
glass!
Yellow or brown
film on inside
surfaces!
White film on
inside surface!
POSSIBLE CAUSES
•
•
Combination of soft
water and too much
detergent
Glassware not DW safe
•
Tea or coffee stains
•
Iron deposits in water
can cause an overall
film
•
Hard water minerals
•
Button is not in the
‘OFF’ position
•
Dishes block detergent
cups
•
This is normal
18
WHAT TO DO
•
•
Use less detergent if you have soft
water and select a shorter cycle to
clean the glassware.
Check with manufacturer of
glassware.
•
Use a solution of ½ cup of bleach
and 3 cups warm water to remove
the stains by hand. Rinse
thoroughly.
•
You have to call a water softener
company for a special filter.
•
To clean the interior, use a damp
sponge with dishwasher detergent
and wear rubber gloves. Never use
any other cleaner than dishwasher
detergent for the risk of foaming or
suds.
•
Turn the Button to ‘OFF’ position
and slide the door latch to the left.
•
Reload the dishes properly.
•
There is some steam coming
through the vent by the door latch
during drying and water draining.
Detergent cup lid
won’t latch!
Detergent left in
dispenser cups!
Steam
18
BAUMATIC BFD65W dishwasher user manual
PROBLEM
Black or grey
marks on dishes!
Water standing in
the bottom of the
tub!
POSSIBLE CAUSES
•
•
Aluminium utensils
have rubbed against
dishes
•
•
Door popping
open!
WHAT TO DO
•
Use a mild abrasive cleaner to
eliminate those marks by hand.
•
A small amount of clean water
around the outlet on the tub bottom
at the back of the tub keeps the
water seal lubricated. No action
required.
•
Be careful not to overfill the rinse
aid dispenser.
•
Spilled rinse aid could cause
oversudsing and lead to
overflowing.
•
Wipe away any spills with a damp
cloth.
•
Make sure the dishwasher is level.
•
Make sure if you’re using 3-in-1
tablets that you do not put rinse aid
and salt into the appliance as well.
* See previous 3-in-1 tablets
note(PAGE 5)
•
Level appliance & ensure top screws
attaching appliance to work surface
are not lifting the weight of the
dishwasher.
•
Weight on the door should not
exceed 4 kilograms
This is normal
Dishwasher leaks!
Overfilled dispenser or
rinse aid has spilled
Dishwasher isn’t level
•
3-in-1 Tablets
•
Appliance not level
•
Door too heavy
19
19
Error Codes:
*NOTE*: ALWAYS CALL FOR A Baumatic Ltd ENDORSED /
APPROVED
SERVICE TECHNICIAN TO CARRY OUT REPAIRS.
Codes
Meaning
Possible Causes
Drying Light Flickers
Longer Inlet Time
Faucets not opened
Rinse Light Flickers
Longer Draining Time
The installation position of
the drain pipe is too high
The rinse light and drying
light
Flicker
Longer Heating Time but
not reaching required
temperature
Malfunction of the
temperature sensor or of
the heating element
The Wash light Flickers
Overfilled
Too much inlet water
The Wash Light and Rinse
Light Flickers
Failure of temperature
sensor
Short circuit or break of
temperature sensor
The Wash Light, Rinse Light
and Drying Light Flicker
Failure of temperature
sensor
Open circuit or break of
temperature sensor
20
BAUMATIC BFD65W dishwasher user manual
21
INSTALLATION INSTRUCTIONS
NOTE: APPLIANCE SHOULD ONLY BE FITTED
BY A TRAINED TECHNICIAN
INSTALLING YOUR DISHWASHER
a)
PREPARATION
Before you install your appliance, make sure that the place you
have chosen to fit it is:
• Near the existing power socket.
• So that you can choose one side of the cabinet cavity to
easily connect the dishwasher’s drain hoses.
• Near your sink so you have easy access to the water inlet
and drain hoses.
• If dishwasher is to be installed at the corner of cabinet
area, make sure you have enough space when the door is
opened.
• Is structured so that you have less than 5 mm between
the top of the dishwasher and cabinet. Also check that the
outer door is aligned to cabinet. (See figures below).
21
BAUMATIC BFD65W dishwasher user manual
d)
22
NEXT, CONNECT THE WATER INLET
(SEE FIGURE BELOW):
Connect the cold water supply hose to a
threaded ¾ inch connector and make sure that
it is fastened tightly in place.
Attach tube C to the cold water supply A.
If the water pipes are new or have not been
used for a long time, let the water run to make
sure that the water is clear and free of
impurities. The water inlet may get blocked and
damage the appliance.
Make sure the water pressure is the same as the
range indicated on the data tag.
DO NOT CONNECT TO THE HOT
WATER SYSTEM!
If your appliance is fitted with an aqua stop
system then this must be fitted vertically
(pointing upwards) not downwards or sideways.
e)
THEN, CONNECT THE DRAIN HOSE
(SEE FIGURE BELOW):
The curved end of the drainage hose should be hooked into the drainage stand pipe or, alternatively, over
the edge of your sink.
During installation, make sure that:
•
•
•
•
•
The drainage hose is not kinked or crushed.
The hose end, relative to the top surface of the dishwasher (SEE FIGURE BELOW), must be
placed at a height between 32cm and 80cm.
The end of the hose must never be immersed in water.
The drainage hose must not be extended to more than a maximum length of 1 metre. The
extension must have the same internal diameter. Furthermore, the maximum height at which
the hose end can be placed (in the case of an extended tube) must be reduced from 80cm to
50cm.
The drainage stand pipe must have an internal diameter of no less than 4 cm.
NOTE:
DO NOT EXTEND THE DRAIN HOSE AS THIS CAN AFFECT THE
PERFORMANCE OF THE DISHWASHER.
22
BAUMATIC BFD65W dishwasher user manual
23
f) NOW YOU ARE READY TO CONNECT THE
POWER CORD.
WARNING!
ELECTRICITY CAN BE DANGEROUS. PLEASE READ THE FOLLOWING
CAREFULLY:
ELECTRICAL CONNECTION
Electrical Requirements
The dishwasher is designed for operation on an adequately wired individual 220-240V AC,
50-60Hz system. The required fuse rating is 13amp. Fused electrical supply is required –
copper wire only. Time delay fuse or circuit breaker is recommended. Make sure that this
appliance runs off its own separate circuit. Outlet should be placed in adjacent cabinet.
WARNING – ENSURE PROPER GROUND EXISTS
BEFORE USE.
After making sure that the voltage and the frequency values for the current in your home
correspond to those on the rating plate and that the electrical system is sized for the
maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed
properly. If the electrical socket to which the appliance must be connected is not right for
the plug, replace the socket, rather than using adaptors of the like as they could cause
overheating and fire.
23
BAUMATIC BFD65W dishwasher user manual
24
g) NOW, PUT THE DISHWASHER ON THE SLIDE
RAILS (These are supplied so your appliance can be pushed into place
easily and to protect your floor surface from pressure points). See figure at
bottom of page.
h) THEN, APPLY THE CONDENSATION STRIP.
The Condensation Strip must be fitted to the
underside of the worktop above your dishwasher
to protect it against any moisture. Its purpose
is to deflect steam rising from your appliance to
protect your worktop’s underside.
•
•
The strip is located inside your
dishwasher.
Ensure the surface is clean prior to
sticking to underside of the worktop.
•
Separate the backing paper from the
strip.
•
Stick to the underside of the worktop.
Note: Failure to attach strip could
result in damage to the underside
of your work surface!
i) NOW YOU ARE READY TO PUSH THE
DISHWASHER INTO POSITION (SEE FIGURE BELOW):
NOTE –
MAKE SURE YOU HAVE THE
DISHWASHER ON ITS SLIDE RAILS
(STEP 4 IN ILLUSTRATION ON
RIGHT).
THEN MOVE IT INTO THE CABINET
RECESS (AS PICTURED ON RIGHT).
ENSURING THAT IT IS BACKED UP
AGAINST THE WALL. ATTACH THE
FURNITURE DOOR (STEP 1 AS
PICTURED ON RIGHT) IF YOU HAVE
NOT ALREADY DONE SO.
YOU ARE NOW READY TO SECURE
YOUR APPLIANCE TO THE CABINET
AREA (STEP 8 AS PICTURED ON
RIGHT) & (STEPS 2 & 7 AS PICTURED
ON RIGHT).
SEE p. 33 FOR FURTHER
INSTRUCTIONS AS TO HOW TO
ACCOMPLISH THESE.
24
BAUMATIC BFD65W dishwasher user manual
25
j) NOW GET THE DISHWASHER LEVEL.
NOTE: YOUR
WARNING!
DISHWASHER MUST
BE CAREFUL WHILE YOU ARE
LEVELLING YOUR DISHWASHER
IN PLACE – IT COULD TIP OVER
AND INJURE YOU!
BE LEVEL FOR
PROPER DISH RACK
OPERATION AND
WASH
PERFORMANCE.
CONSULT THE FIGURE BELOW
FOR HELP!
THE REAR FEET CAN BE ADJUSTED FROM THE FRONT OF THE DISHWASHER BY TURNING THE SCREWS ON THE
LEFT AND RIGHT HAND SIDES OF THE CABINET. TO ADJUST THE FRONT FEET, USE A WRENCH / SPANNER AND
TURN THE FRONT FEET UNTIL THE DISHWASHER IS LEVEL (PLEASE SEE ‘REMARK B’ IN THE ABOVE FIGURE).
WHEN YOU ROTATE THE ADJUSTER POLE CLOCKWISE, THE BACK FOOT WILL DRIVE UP THE DISHWASHER.
(PLEASE SEE ‘REMARK A’ IN THE ABOVE FIGURE). PLEASE NOTE THAT THE FRONT LEVELLING FEET ARE
HELD TO THE APPLIANCE BY LOCKING NUTS. PLEASE HANDLE THESE WITH CARE WHEN INSTALLING.
CAUTION:
IT IS IMPORTANT THAT YOU RAISE THE BACK OF THE DISHWASHER WHILE YOU ARE LEVELLING THE
REAR FEET. THIS CAN BE ACHIEVED USING A LEVER AND FULCRUM. TAKE GREAT CARE WHEN
ATTEMPTING TO MOVE OR TILT YOUR DISHWASHER IN ANY WAY. NOTE: BAUMATIC WILL NOT BE
LIABLE FOR ANY INJURY OR DAMAGE INCURRED WHILST YOU ATTEMPT TO MOVE YOUR DISHWASHER.
k) THE DISHWASHER MUST NOW BE SECURED
IN PLACE. THERE ARE TWO WAYS TO DO THIS, DEPENDING ON YOUR TYPE OF WORK
SURFACE. REMEMBER THAT YOUR DISHWASHER’S WEIGHT MUST REST ON ITS FEET. THE
FASTENINGS AT ITS TOP ARE TO GIVE STABILITY AND WILL PREVENT IT FROM TIPPING
FORWARD:
NORMAL WORK SURFACE - SECURE TO THE WORK SURFACE’S UNDERSIDE BY USING TWO
WOODSCREWS ENSURING THAT THE DISHWASHER CAN OPEN AND CLOSE COMFORTABLY.
MARBLE OR GRANITE WORK TOP – FOR THESE WORKTOPS, YOU WILL NOT BE ABLE TO
SECURE THE TOP OF THE DISHWASHER TO THE UNDERSIDE OF THE SPECIAL WORK SURFACE.
BECAUSE OF THIS, YOU WILL HAVE TO SECURE THE BRACKET TO THE SIDE PANELS OF THE
DISHWASHER CABINET AND SECURE THE DISHWASHER TO THE FURNITURE HOUSING. PUT THE
RUBBER CAP OVER THE SCREW.
NOTE: DO NOT PUT ANY WEIGHT FROM THE DISHWASHER ON THESE SCREWS – ENSURE
YOUR DISHWASHER’S WEIGHT RESTS ENTIRELY ON ITS FEET.
25
BAUMATIC BFD65W dishwasher user manual
26
FINAL CHECKLIST BEFORE OPERATING
NOTE: BEFORE YOU START USING YOUR DISHWASHER,
PLEASE MAKE SURE YOU HAVE CHECKED:
•
WHETHER THE DISHWASHER IS LEVEL AND
FIXED.
•
WHETHER THE INLET VALVE IS OPENED.
•
WHETHER THERE IS LEAKAGE AT THE
CONNECTIONS OF THE CONDUCTS.
•
WHETHER THE WIRES ARE TIGHTLY
CONNECTED.
•
WHETHER THE POWER IS SWITCHED ON.
•
•
WHETHER THE INLET AND DRAIN HOSES
ARE KNOTTED / KINKED.
WHETHER ALL PACKING MATERIALS &
PRINTED MATTER HAVE BEEN REMOVED
FROM THE DISHWASHER.
PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE
26
BAUMATIC BFD65W dishwasher user manual
BAUMATIC LTD. -
27
CONDITIONS OF GUARANTEE.
Dear Customer,
The conditions of guarantee which apply to your Baumatic appliance are as follows: This product is
guaranteed for 12 months from the date of original purchase.
Baumatic Ltd will repair any defect that arises due to faulty materials or workmanship free of charge
during this period.
In addition, your appliance is covered by a 5 year parts warranty. Baumatic Ltd will provide free of charge
the parts required to repair the appliance, only if they are fitted by a Baumatic engineer, for any defect
that arises due to faulty materials or workmanship within a period of 5 years from the original purchase
date.
An additional and annually renewable insurance scheme for labour is available should you wish to extend
the warranty period.
Should any person other than an authorised representative of Baumatic Ltd interfere with the appliance,
the policy is negated and Baumatic Ltd will be under no further liability.
The guarantee covers the appliance for normal domestic use only, unless otherwise stated.
Any claims made under the terms of the guarantee must be supported by the original invoice/bill of sale
issued at the time of purchase.
This guarantee is transferable only with the written consent of Baumatic Ltd.
If the appliance fails and is considered either not repairable or uneconomical to repair between twelve
months and five years from purchase date, a free of charge replacement will not be offered.
The guarantee for any replacement will only be for the remainder of the guarantee on the original product
purchased.
This guarantee does not cover:
•
•
•
•
•
•
•
•
Sinks and taps
Failure to comply with the manufacturer’s instructions for use.
The replacement of cosmetic components or accessories.
Accidental damage or wilful abuse.
Subsequent loss or damage owing to the failure of the appliance or electrical supply.
Incorrect installation.
Losses caused by Acts of God, civil war, failure to obtain spare parts, strikes or lockouts.
Filters, fuses, light bulbs, external hoses, damage to bodywork, paintwork, plastic items, covers,
baskets, trays, shelves, burner bases, burner caps, decals, corrosion, rubber seals, refrigeration
system blockage.
In the course of the work carried out it may be necessary to remove the appliance from its operating
position. Whilst all reasonable care will be taken, Baumatic Ltd cannot accept responsibility for damage
sustained to any property whatsoever in this process.
This guarantee is in addition to and does not diminish your statutory or legal rights.
Contacting Baumatic.
SALES
TEL: 0118 933 6900
FAX: 0118 931 0035
SPARES
TEL: 0118 933 6922
FAX: 0118 933 6942
SERVICE
TEL:
0118 933 6911
FAX:
0118 986 9124
TECHNICAL / ADVICE
TEL: 0118 9336933
FAX: 0118 9336942
For mainland UK and Northern Ireland, please contact one of the above numbers for further information or
any other query you may have.
For ROI (Republic of Ireland), please contact one the numbers below:
TEL: 01-4030501
FAX: 01-4030503
Thank you for buying Baumatic.
27
BAUMATIC BFD65W dishwasher user manual
28
Baumatic Ltd
Make-up for your kitchen
Headquarters
Baumatic Ltd.
Baumatic Buildings,
6 Bennet Road,
Reading,
Berkshire
RG2 0QX, United Kingdom
Sales Telephone
+44 118 933 6900
Sales Fax
+44 118 931 0035
Service Telephone
+44 118 933 6911
Service Fax
+44 118 986 9124
Spares Telephone
+44 118 933 6922
Technical / Advice Telephone
+44 118 933 6933
E-mail:
sales@baumatic.co.uk
technical@baumatic.co.uk
Http (Internet site):
www.baumatic.com
Baumatic UK/cod. 1230000666
This appliance is marked according to the European
Directive 2002/96/EC on Waste Electrical and
Electronic Equipment(WEEE).
This guideline is the frame of a Europeanwide validity
of return and recycling on Waste Electrical and
Electronic Equipment.
28
BAUMATIC BDW01 dishwasher user manual
35
35